BORANG J PERKARA MAKLUMAT Program: Diploma Kejuruteraan Elektrik Jabatan: Jabatan Kejuruteraan Elektrik Semester/ Tahun: Semester 5 Tajuk Kajian/Projek: Greenhouse Smart System Jenis Kajian/Projek: Projek Pelajar Tahun Akhir Kategori Kluster Penyelidikan: Tanda “ / ” pada yang berkenaan: Penyelia: Nama: SHATINI BINTI MD SAID Penyelia Bersama: 1. Nama: 2. Nama: Multi-Disiplin: 1. Electrical/electronics 2. Agriculture Kolaborasi: (Industri/Komuniti) Objektif Kajian/Projek: The purpose of the project is to develop an agricultural system that automatically controls temperature and humidity in a greenhouse so that it is no longer manually done using human workforce. Relative temperature humidity in a plant or greenhouse will always be in optimal condition for plant growth. Sains Tulen Sains Sosial Sains Gunaan Sastera & Sastera Ikhtisas / Teknologi & Kejuruteraan Warisan Alam & Budaya Sains Kesihatan & Klinikal ICT
PERKARA MAKLUMAT Skop Kajian/Projek: • Use humidity sensor (DHT11) • Arduino Uno microcontroller used to allows direct connection to a desktop PC that can then be used to compile, download, and run programs directly on this module. • Suitable for a small to medium sized green house. • The maximum detected temperature is 50 ° C and the minimum detected temperature is 0 ° C • Use chili tree Penglibatan Pelajar: (merujuk kepada skop kajian/projek) Fakhrul Mukminin Bin Musa (15DET20F2005) – Design a greenhouse smart system prototype, develop the circuit for the system and has also done the troubleshooting for the circuit and the components. Abstrak Kajian/Projek: The project is carried out to automatically control the temperature and humidity of a plant area. The system allows the temperature and humidity in the area to be at the optimum level for plant growth. The project was developed aimed at reducing the human workforce in the agricultural sector. The system was developed with simulation and analysis of product models that have been studied from every corner of the world. The collection and analysis of data for this system has been fully studied to enable it to be built according to the objectives to be achieved. In conclusion, the system has successfully achieved the objective of enhancing the success of the crop product without using a high human workforce. The suggestions for improvement in this system are to add components such as sensors and high power pumps so that they can expand the size of the greenhouse that can use this system. Infografik Kajian/Projek:
Peringkat: (sekiranya ada menyertai pertandingan) Jabatan/ Politeknik/ JPPKK/ Kebangsaan/ Antarabangsa No. Pendaftaran Harta Intelek (jika ada ) Disemak oleh: Tandatangan Penyelaras Kursus Projek Nama dan Cop: Disahkan oleh: Tandatangan Penyelaras Projek Pelajar Jabatan Nama dan Cop: Nota: Borang ini perlu diisi oleh pelajar dan dihantar kepada Penyelaras Kursus Projek/Jabatan dalam bentuk salinan keras (hardcopy) dan salinan lembut (softcopy) (Borang LAMPIRAN J dan gambar hasil projek dalam format jpeg/bitmap) bersama Laporan Akhir dan hasil projek.