sflm_quickstart

SFLM QuickStart: Automatic Method (internet access required)

Install the Software package using the CD-ROM. The STEP 3 In case you can not connect to “http://www.sflm.net”, STEP 4
installation process differs between UNIX/Linux/Windows. Press the “Register Online”button please perform Offline Registration. For more information , Click the “Automatic Update” or “Install Saved File” button.
Please follow one of directions according to your platform: see Step 3 of Offline Registration section on the reverse side.
STEP 4
Installation on UNIX/Linux Fill in the each blank of Email Address, Company, Telephone, Installing the License File STEP 5
1. Install the SFLM Service using the command: Contact Name. Then click “Next” button. If you do not intend to download your license file If “Install Saved File” was selected in Step 4, click the
automatically, copy the license file to your mount or “Browse...”button to locate the license file. After specifying
/<install directory>/bin/sflm local drive so that the license server can read it. the saved license file, click “Next”.
2. Enter your password of managing the license server,
STEP 1
which you have already specified in installing Software Enter http://127.0.0.1:3162 or http://<server-
Package: name>:3162 into your browser’s address bar (See
“Remote Registration”). For this example, <servername>
Administrator Password:? is mrtall.
3. Your web browser (Netscape or Mozilla) will pop up.
Note: If not, please perform Remote Registration

described on the reverse side

Installation on Windows
1. Run the package installation and ensure “Licensing”

is selected.
2. Enter any password when promoted, it is important to

keep this for future SLFM administrative tasks.

Hereafter, the UNIX/Linux/Windows user will follow the
same installation steps below.

STEP 1 STEP 2 STEP 6
Enter http://127.0.0.1:3162 or http://<server- Click the “Install New License(s)” button. Click “Show Valid License(s)” button.
name>:3162 into your browser’s address bar (See
“Remote Registration”). For this example, <servername> STEP 5
is mrtall. Click “Next” button again.

STEP 2 STEP 6 STEP 3 STEP 7
Enter the password which you have already registered in When the ID with letters beginning from “0SSMID” appeared Enter the password which has already been registered The list of available products and the number of each product will
installing Software Package. for the machine IDs, this means that registration process was through Online/Offline registration. show up on the window.
completed. You must notify your vendor this ID for the license
to be issued. After the vendor has sent you the license file, you
need to install this file following the steps of the “Installing the
License File” section below:

STEP 8
Configure each application installation to use the new serever
by using sflm_access. Ensure the new server is present in the
list of available servers or add it using configure->add->local
server from within sflm_access.

SFLM QuickStart: Manual Method (no internet access)

Install the Software package using the CD-ROM. STEP 2 STEP 5 STEP 7
The installation process differs between UNIX/Linux/ Enter the password which you have already registered in installing
Windows. Please follow one of directions according Software Package. After you receive the Code Name and the Activation When the ID with letters beginning from “0SSMID”
to your platform: Code from the vendor, perform Step 1 to 5 again, then appeared for the Machine IDs, this means that
click “Next”. registration process was completed successfully.
You must notify your vendor this ID for the license to
Installation on UNIX/Linux be issued. After the vendor sent you the license file,
1. Install the SFLM Service using the command: you need to install this file following the steps of the
“Installing the License File” section on the reverse side.
/<install directory>/bin/sflm -install
2. Enter your password of managing the license server, STEP 3
Press the “Register Online”button
which you have already specified in installing Software
Package:

Administrator Password:?
3. Your web browser (Netscape or Mozilla) will pop up.
Note: If not, please perform Remote Registration

described on this page.

Installation on Windows STEP 6
1. Run the package installation and ensure “Licensing” Enter these information to each blank on the window,
then click “Next” again.
is selected.
2. Enter any password when promoted, it is important to Remote Registration
If the local license server does not have a web
keep this for future SLFM administrative tasks. browser or access to the internet all web based
actions can be performed from another machine on
Hereafter, the UNIX/Linux/ STEP 4 your network. To access the SFLM administration
Windows user will follow the pages use the address http://<server_name>:3162 or
same installation steps below. Notify your vendor the information of Machine http://<server_ip_address>:3162
Credentials, Machine ID, and Machine keys The Silvaco Management Console (sman) also has
STEP 1 displayed on the screen. Wait until the vendor informs the ability to launch a web browser to the SFLM
Enter http://127.0.0.1:3162 or http://<servername>: you the Code Name and the Activation Code, which management pages,
3162 into your browser’s address bar (See “Remote may take several days.
Registration”). For this example, <servername> is
mrtall.