Sourcebook Loctite

EPOXIES & POLYURETHANES LOCTITE® Hysol® Polyurethane Kit
Properties Chart
LOCTITE® Hysol® potting and encapsulating compounds
are two-part epoxy and polyurethane systems LOCTITE® ITEM PACKAGE COLOR WORK SHORE AGENCY KEY
formulated to offer a wide range of performance PRODUCT NUMBER TYPE & SIZE LIFE HARDNESS APPROVALS FEATURES
characteristics matched to specific application
requirements. Any epoxy resin can be combined with 3364™ 1166733 50 ml dual Black 45 sec. D 80 UL 94V-0 Fast
any epoxy hardener to create a mixed system. The same LOCTITE® HYSOL® cartridge cure, 1:2
applies to the polyurethane resins and hardeners. POLYURETHANE KIT mix ratio,
black

LOCTITE® Hysol® Epoxy Product Chart 100

LOCTITE® ITEM PACKAGE PACKAGE KEY FEATURES LOCTITE® Hysol® Polyurethane System
PRODUCT NUMBER TYPE & SIZE WEIGHT Properties Chart
General-Purpose
LOCTITE® HYSOL® EPOXIES 3140™RESINS 39944 1 gallon pail 12 lbs. SYSTEM CHARACTERISTICS LOCTITE® HYSOL® Epoxies & Polyurethanes
39945* 5 gallon pail 65 lb. High Temperature POLYURETHANE SYSTEMS
3141™ 39947 1 gallon pail 12 lbs. Thermally Conductive
3142™ Flame Retardant 3173™/3182™ 3173™/3183™ 3173™/3184™
3145™ 39950 1 gallon pail 16 lbs. Glossy Surface Finish
3160™ Fast Cure VISCOSITY Resin 75 75 75
3162™ 40512 1 gallon pail 13 lbs. Excellent Adhesion (cP) Hardener 30,000 800 14,000
3163™
39958* 5 gallon pail 40 lbs. General-Purpose Mixed 5,500 450 2,250
3164™ Low Shrinkage
3165™HARDENERS 39960 1 quart can 1.8 lbs. WORKING At 73°F (23°C) <7 minutes 20 to 40 minutes 150 minutes
TIME @ 300 g
39964 1 quart can 1.7 lbs. @ 105 g @ 300 g
39966* 5 gallon pail 38 lbs.
39970* 5 gallon pail 40 lbs. TYPICAL UNCURED PROPERTIES GEL TIME At 73°F (23°C) 14 minutes 40 to 70 minutes 150 minutes
@ 300 g
39395 1 quart can 1.7 lbs. @ 105 g @ 300 g

CURE CYCLE Normal 73°F (23°C) 90 minutes 24 hours 24 hours

LOCTITE® Hysol® Polyurethane Product Chart Alternate 185°F (85°C) 30 minutes 1 to 3 hours 1 to 3 hours

MIX RATIO By Weight 13:87 30:70 15:85
(Resin : Hardener)

LOCTITE® ITEM NUMBER PACKAGE TYPE PACKAGE KEY FEATURES By Volume 1:5.2 1:3 1:4.8
PRODUCT & SIZE WEIGHT (Resin : Hardener)

LOCTITE® HYSOL® POLYURETHANES 3173™RESINS 39984 1 quart can 2.5 lbs. General- COLOR Resin Dark Brown Clear Brown Clear Brown
39985 1 gallon pail 10 lbs. Purpose
3182™ 39986* 5 gallon pail 50 lbs. Hardener Black Opaque Black Opaque White
Fast Cure
39995 1 gallon pail 12 lbs. Mixed Black Opaque Black Opaque White
39996* 5 gallon pail 62 lbs.
39997* 55 gallon drum 625 lbs. SPECIFIC Resin 1.23 1.23 1.23
GRAVITY Hardener 1.60 0.96 1.45
HARDENERS
3183™ 39998 1 gallon pail 7.5 lbs. General- Mixed 1.55 1.06 1.40
39999* 5 gallon pail 37 lbs. Purpose

TYPICAL CURED PROPERTIES SHORE HARDNESS A 75 A 70 A 80

3184™ 39398 1 gallon pail 12 lbs. Flame
39397* 5 gallon pail 60 lbs. Retardant

GLASS TRANSITION -10 -16 -15
TEMPERATURE/Tg (°C)
LOCTITE® Hysol® Epoxy Kit Properties Chart
CTE ABOVE Tg (M/MM°C)
LOCTITE® ITEM PACKAGE WORK SHORE AGENCY 128x10e-6 190x10e-6 151x10e-6
PRODUCT NUMBER TYPE & SIZE LIFE HARDNESS APPROVALS
COLOR KEY FEATURES

E-60NC™ 29324 50 ml dual Black 60 D 85 CFIA Electrically
29325 Listed noncorrosive,
29326 cartridge min. low viscosity DIELECTRIC 0.1 kHz 4.68 5.92 4.51
CONSTANT 1.0 kHz 4.02 4.36 4.29
200 ml dual 3.65 3.94
3.31 3.56
LOCTITE® HYSOL® EPOXY KITS cartridge 0.22 0.02
0.17 0.04
400 ml dual 10.0 kHz 3.76 0.10 0.06
0.05 0.07
cartridge TYPICAL CURED PROPERTIES 1.1x10e+11 1.1x10e+12
6.83x10e+12 6.61x10e+13
E-30CL™ 29329 50 ml dual Clear 30 D 85 N/A Medium 100.0 kHz 3.63 375 370
29330 fixture, N/A 94V-0 @ 3/8 in.
29331 cartridge min. chemical DISSIPATION 0.1 kHz 0.13 N/A 94V-2 @ 1/4 in.
resistant 0.07
200 ml dual

cartridge FACTOR 1.00 kHz

400 ml dual

cartridge 10.0 kHz 0.04

E-40EXP™ 1511653 200 ml dual Black 35 D 80 UL 674 Chemical 100.0 kHz 0.02
resistant, use
cartridge min. in hazardous
locations
1511896 5 gallon INSULATION RESISTANCE (OHMS) 2.5x10e+13

pail - part A

1511897 5 gallon VOLUME RESISTIVITY (OHMS/CM) 1.5x10e+15

pail - part B

DIELECTRIC STRENGTH (VOLTS/MIL) 370

FLAMMABILITY RATING N/A

ITEMS IN RED = Source’s PICK or NEW UL FILE NO. E257711 N/A

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Epoxies &
Polyurethanes

SYSTEM LOCTITE® 3140™ HYSOL® EPOXY SYSTEM LOCTITE® 3141™ HYSOL® EPOXY SYSTEM
CHARACTERISTICS
3140™/ 3160™ 3140™/ 3162™ 3140™/ 3163™ 3140™/ 3164™ 3140™/ 3165™ 3141™/ 3160™ 3141™/ 3162™ 3141™/ 3163™ 3141™/ 3164™ 3141™/ 3165™

VISCOSITY Resin 11,000 11,000 11,000 11,000 11,000 80,000 80,000 80,000 80,000 80,000

101 (cP) 120 450 105 55 180 120 450 105 55
Hardener 180

Mixed 1,700 2,000 1,500 1,500 2,000 7,000 5,000 4,000 6,000 13,000

WORKING 73°F (25°C) 80 to 100 min. 5 to 10 min. 80 to 100 min. 10 to 15 min. to 1.5 hrs. 1.5 to 2 hrs. 5 min. 30 to 45 min. 10 min. 35 to 40 min.
TIME @ 200 g @ 400 g @ 200 g
Potting, Molding & Encapsulating GEL TIME @ 200 g @ 100 g @ 200 g @ 400 g @ 400 g @ 400 g @ 200 g 60 to 80 min. 20 to 25 min.
TYPICAL UNCURED PROPERTIES CURE @ 200 g @ 200 g 65 to 75 min.
CYCLE 73°F (25°C) 2.5 to 3 hrs. 10 to 15 min. 2.5 to 3 hrs. 25 to 35 min. 2 to 3 hrs. 2.5 to 3.5 hrs. 10 to 15 min. 24 hrs. 24 hrs. @ 200 g
@ 200 g @ 400 g @ 400 g
MIX Normal @ 105 g @ 200 g @ 400 g @ 200 g 2 hrs. 2 hrs. 24 hrs. @
RATIO 73°F (25°C) 24 hrs. 16 hrs. 24 hrs. @ 77°F + 4 hrs.
16 hrs. 24 hrs. 77°F + 4 hrs. 24 hrs. 24 hrs. @ 200°F
COLOR @ 200°F
N/A
Alternate 2 hrs. 1 hr. 2 hrs. 2 hrs. N/A 4 hrs. 2 hrs.
150°F 100:20
(60°C) 100:18.1 100:29 100:29.5 100:9 4:1 100:19.8 100:30 100:31.5 100:9

By Weight
(R:H)

By Volume 3.1:1 3.6:1 2:1 2:1 6:5:1 2.5:1 3:1 2:1 2:1 6.5:1
(R:H) Black Black Black Black Black
Black Black Black Black Black
Resin

Hardener Clear Clear Clear Clear Clear Clear Clear Amber Amber Clear

Mixed Black Black Black Black Black Black Black Black Black Black

SPECIFIC Resin 1.64 1.64 1.64 1.64 1.64 1.61 1.61 1.61 1.61 1.61
GRAVITY Hardener 1.00 0.99 0.96 0.97 0.96 1.00 0.99 0.96 0.97 0.96

Mixed 1.48 1.48 1.41 1.42 0.96 1.44 1.46 1.40 1.40 1.40

SHORE HARDNESS D 80 D 80 D 80 D 70 D 85 D 85 D 90 D 80 D 85 D 85

GLASS TRANSITION 27 35 20 27 67 43 75 38 31 104
TEMPERATURE/Tg (°C) 130x10e-6 160x10e-6 135x10e-6 138x10e-6 111x10e-6 115x10e-5
TYPICAL CURED 44x10e-6 125x10e-6 133x10e-6 150x10e-6 119x10e-6 60.7x10e-6 39.7x10e-6 52.6x10e-6 49.2x10e-6 35x10e-6
PROPERTIES CTE ABOVE Tg 4.43 4.30 3.91 3.58 4.11 4.28
(MM/MM°C) 4.37 37.5x10e-6 44.9x10e-6 82.6x10e-6 36.0x10e-6 4.22 3.88 3.52 3.97 4.18

CTE BELOW Tg 4.25 4.61 4.2 4.87
(MM/MM°C) 4.20 4.37 4.0 4.83

DIELECTRIC 0.1 kHz
CONSTANT

1.0 kHz

10.0 kHz 4.31 4.16 4.20 3.8 4.75 4.14 3.84 3.46 3.87 4.06

100.0 kHz 4.24 4.10 4.05 3.7 4.64 4.03 3.79 3.39 3.77 3.92

DISSIPATION 0.1 kHz 0.008 0.010 0.040 0.08 0.003 0.01 0.01 0.01 0.02 0.01
FACTOR 0.01 0.01 0.01 0.02 0.02
0.008 0.011 0.027 0.04 0.007 0.02 0.01 0.01 0.02 0.02
1.0 kHz 0.02 0.01 0.02 0.02 0.02
TYPICAL ELECTRICAL PROPERTIES 0.010 0.012 0.026 0.03 0.011 5.72x10e+13 4.09x10e+13 1.23x10e+14 4.57x10e+13 2.15x10e+13
10.0 kHz
0.014 0.013 0.023 0.03 0.014
100.0 kHz
1.14x10e+13 2.67x10e+13 1.61x10e+12 7.5x10e+111 5.19x10e+13
INSULATION
RESISTANCE (OHMS)

VOLUME RESISTIVITY 6.03x10e+14 2.53x10e+15 1.02x10e+14 1.5x10e+14 2.69x10e+15 4.03x10e+15 2.61x10e+15 7.41x10e+15 2.98x10e+15 1.37x10e+15
(OHMS/CM)

DIELECTRIC STRENGTH 365 385 365 410 355 375 355 385 395 365
(VOLTS/MIL)

FLAMMABILITY RATING N/A N/A N/A UL 94B N/A N/A N/A N/A N/A N/A
UL FILE NO. E257711 @ 1/16 in.

INSULATION SYSTEM N/A N/A N/A UL 1446 N/A N/A N/A N/A N/A N/A
UL FILE NO. E257711

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

SYSTEM CHARACTERISTICS LOCTITE® 3142™ HYSOL® EPOXY SYSTEM LOCTITE® 3145™ HYSOL® EPOXY SYSTEM

3142™/3160™ 3142™/3162™ 3142™/3163™ 3142™/3164™ 3142™/3165™ 3145™/3160™ 3145™/3162™ 3145™/3163™ 3145™/3164™ 3145™/3165™
32,760 32,760 32,760
VISCOSITY Resin 120,000 to 120,000 to 120,000 to 120,000 to 120,000 to 32,760 32,760
(cP) Hardener 200,000 200,000 200,000 200,000 200,000

180 120 450 105 55 180 120 450 105 55

Mixed 7,500 6,000 7,000 8,000 18,000 5,560 7,150 5,315 5,790 13,355

WORKING 77°F (25°C) 1.5 to 2 hrs. 5 to 10 min. 2 hrs. 25 min. 80 min. 2.5 to 4 hrs. 15 to 30 min. 3 to 3.5 hrs. 35 to 45 min. 2.5 to 3 hrs.
TIME @ 400 g @ 200 g @ 400 g @ 400 g @ 400 g
GEL TIME 77°F (25°C) 50 min. @ 200 g @ 200 g @ 200 g @ 200 g @ 400 g
3.5 to 4 hrs. @ 400 g 2.5 hrs.
CURE Normal @ 400 g 5 to 30 >3 hrs. @ 400 g 6 to 8 hrs. 35 to 45 min. 6 to 7 hrs 75 to 90 min. 5 hrs.
CYCLE 77°F (25°C) min. @ 400 g 24 hrs.
TYPICAL UNCURED PROPERTIES 24 hrs. @ 200 g @ 200 g @ 200 g @ 200 g @ 200 g @ 200 g
MIX 48 hrs. 2 hrs.
RATIO 24 hrs. 102
100:14.3
COLOR 24 hrs. 24 hrs. 24 hrs. 24 hrs. 24 hrs. 24 hrs. @
2.8:1 77°F +
@ 77°F 2 hrs. 4 hrs. @ 200°F
Black 100:13
+4 hrs. @ 200°F 4 hrs. @ +
200°F
Alternate 4 hrs. 2 hrs. 4 hrs. 4 hrs. @ 2 hrs. 4 hrs. 2 hrs.
150°F (66°C) 100:9 100:10.9 + 200°F 100:15.5 100:20 100:6
4.5:1 3.6:1 Epoxies & Polyurethanes
By Weight 100:10.7 Black Black 100:4.1 100:15
(R:H)

By Volume 3.8:1 9.7:1 4:1 4.5:1 3.7:1 2.9:1 9.7:1
(R:H)

Resin Black Black Black Black Black Black Black

Hardener Clear Clear Amber Amber Clear Clear Clear Clear Clear Clear

Mixed Black Black Black Black Black Black Black Black Black Black

SPECIFIC Resin 2.40 2.40 2.40 2.40 2.40 1.67 1.67 1.67 1.67 1.67
1.00 0.99 0.96 0.97 0.96
GRAVITY

Hardener 1.00 0.99 0.96 0.97 0.96

Mixed 1.54 1.54 1.53 1.50 1.62 1.51 1.54 1.49 1.49 1.58

SHORE HARDNESS D 90 D 90 D 90 D 85 D 90 D 80 D 84 D 80 D 75 D 88

GLASS TRANSITION 26 42 30 29 84 28 42 38 32 53
TEMPERATURE/Tg (°C)

CTE ABOVE Tg 104x10e-6 97.2x10e-6 96.1x10e-6 106x10e-6 87.7x10e-6 1.22x10e-6 128x10e-6 130x10e-6 122x10e-6 111x10e-6
(MM/MM°C)

CTE BELOW Tg 29.2x10e-6 28.2x10e-6 33.5x10e-6 51.9x10e-6 26.9x10e-6 39.2x10e-6 42.6x10e-6 49.0x10e-6 59.4x10e-6 40.6x10e-6
(MM/MM°C)
TYPICAL CURED
PROPERTIES THERMAL Watts/ 0.862/ 0.953/ 0.873/ 0.801/ 1.126/ 0.7935 0.8068 0.8119 0.7324 1.0341
±0.010 ±0.014 ±0.017 ±0.013 ±0.017
CONDUCTIVITY Meter°K

DIELECTRIC 0.1 kHz 5.77 4.87 5.28 5.51 5.65 4.08 3.81 4.27 4.19 4.43
4.28 3.85 4.36 4.46 4.45
CONSTANT 4.15 3.74 4.11 4.22 4.28
4.00 3.63 3.90 3.99 4.11
1.0 kHz 5.69 4.83 5.20 5.35 5.57 0.027 0.028 0.033 0.036 0.045
0.031 0.025 0.046 0.042 0.036
10.0 kHz 5.62 4.78 5.12 5.21 5.46 0.025 0.021 0.037 0.037 0.027
0.023 0.017 0.031 0.034 0.024
100.0 kHz 5.52 4.72 5.02 5.06 5.34 N/A N/A N/A N/A N/A

DISSIPATION 0.1 kHz 0.00 0.01 0.01 0.02 0.01 2.1e+14 2.5e+13 7.3e+14

FACTOR 748 695 794

1.0 kHz 0.001 0.01 0.01 0.02 0.01 N/A N/A UL 94V-0
@ 1/8 in.
TYPICAL ELECTRICAL PROPERTIES 10.0 kHz 0.01 0.01 0.01 0.02 0.01

100.0 kHz 0.01 0.01 0.01 0.02 0.01

INSULATION RESISTANCE 4.61x10e+13 5.31x10e+13 3.65x10e+13 2.75x10e+12 4.09x10e+13
(OHMS)

VOLUME RESISTIVITY 3.00x10e+15 3.47x10e+15 2.55x10e+15 1.65x10e+14 2.61x10e+15 1.10e+14 8.4e+14
(OHMS/CM)

DIELECTRIC STRENGTH 360 345 355 345 335 595 693

(VOLTS/MIL)

FLAMMABILITY RATING N/A N/A N/A N/A N/A N/A UL 94V-0
@ 1/8 in.
UL FILE NO. E257711

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Silicones

103 Your Application WHAT IS THE MOST IMPORTANT ASPECT WHEN CHOOSING
YOUR PRODUCT?
• Single-component, tough,
protectivePotting, Molding & Encapsulating UL 94V-0 Flame Retardant High Adhesion

• Seal components against Fast Cure Standard Cure Difficult-to-Bond
moisture, solvents and Substrates
environmental conditions
5611F™ 5640™ 5611S™ 5056™
• Cure in as little as 30 seconds to
depths of 0.150 in. when exposed
to UV light or visible light

Solution

Key Feature Flame Retardant Flame Retardant Flame Retardant ISO 10993
Color (UL 94V-0 Rating) (UL 94V-0 Rating) (UL 94V-0 Rating) Compliant

Viscosity, cP (Resin/Hardener) Grey Grey Grey Clear/Yellowish
Tint
Product Description 5,000/5,000 10,000/1,000 5,000/5,000
2,200

LOCTITE® 5611F™ Silicone LOCTITE® 5640™ Silicone LOCTITE® 5611S™ Silicone LOCTITE® 5056™
Potting Compound Potting Compound Potting Compound Silicone Adhesive Sealant

Self-Leveling, Self-Leveling, Self-Leveling, Self-Leveling/High
Noncorrosive, Flame Noncorrosive, Flame Noncorrosive, Flame Adhesion
Retardant Retardant Retardant
A UV or visible light curing,
Two-part, flame retardant Two-part, self-leveling Two-part, flame retardant noncorrosive silicone with
(UL 94V-O) silicone. with a V-0 rating and an (UL 94V-O) silicone. very high bond strength.
Products vary in cure speed improved adhesion to Products vary in cure speed Ideal for high speed
and open times from plastics. Grey in color. and open times from adhesion and sealing
fast (F) to standard (S) to UL Listed. fast (F) to standard (S) to applications. High adhesion
match particular end-use match particular end-use for difficult-to-bond
applications. Grey in color. P/N Package Size applications. Grey in color. substrates.
1738359 490 ml dual cartridge
P/N Package Size 1738366 55 gallon drum, part A P/N Package Size P/N Package Size
1738365 5 gallon pail, part B 1214249 25 ml syringe
1385991 490 ml dual cartridge 1386378 490 ml dual cartridge 1214250 1 liter bottle
1387908 4.5 gallon pail, part A 1387908 4.5 gallon pail, part A 1214248* 15 liter pail
1387706 4.5 gallon pail, part B 1388496 4.5 gallon pail, part B
1386373 575 lb. drum, part A 1386373 575 lb. drum, part A
1432213 440 lb. drum, part B 1387212 440 lb. drum, part B

* Made-to-order item.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

104

Self-Leveling Ultra-Clear Silicones

Deep Potting Flowable Noncorrosive Soft Gel Tack-Free Noncorrosive

5031™ 5055™ 5240™ 5625™ 5623™ 5620™

Low Viscosity, Flowable ISO 10993 Fast Cure, Tack-Free Fast Cure,
Self-Leveling Compliant Ultra Clear Clear Ultra Clear
Clear/Yellowish
Clear/Yellowish Tint Clear/Yellow to Clear Mixed: 700 Clear
Tint 525 Green Tint
Mixed: 1,500 Mixed: 200
5,500 18,000

LOCTITE® 5031™ LOCTITE® 5055™ LOCTITE® 5240™ LOCTITE® 5625™ Silicone LOCTITE® 5623™ Silicone LOCTITE® 5620™ Silicone
Nuva-Sil® Silicone Silicone Adhesive Sealant Nuva-Sil® Medical Device Potting Compound Potting Compound Potting Compound
Potting Compound Sealant
Self-Leveling/Flowable Ultra-Clear/Tack-Free Ultra-Clear/Soft Gel Ultra-Clear/Fast Cure
High Adhesion/Visible Self-Leveling/
Light A UV or visible light curing, Noncorrosive Two-part, ultra-clear, soft, Two-part, ultra-clear, Two-part, ultra-clear, fast
noncorrosive silicone noncorrosive silicone gel. tack-free, noncorrosive cure, noncorrosive silicone.
A low viscosity, self- for high speed coating, A UV or visible light Transparent in color. Very silicone gel. Transparent Transparent in color. Ideal
leveling, UV or visible light potting adhesion, or sealing and moisture curing, soft, re-enterable gel. in color. Tough gel. Room for sealant, or potting
curing silicone for high applications. High adhesion noncorrosive silicone ideal Room temperature cure or temperature cure or applications that require a
speed deep potting, coating for difficult-to-bond for high speed adhesion accelerated heat cure. accelerated heat cure. transparent silicone. Fast
and sealing applications. substrates. and sealing applications. room temperature cure.
Provides high adhesion for High adhesion for difficult- P/N Package Size P/N Package Size
difficult-to-bond substrates. P/N Package Size to-bond substrates. 1257475 400 ml dual cartridge 1259300 400 ml dual cartridge P/N Package Size
1212167 25 ml syringe 1257616 40 lb. pail, part A 1257611 40 lb. pail, part A
P/N Package Size 1214246 1 liter bottle P/N Package Size 1257613 40 lb. pail, part B 1257607 40 lb. pail, part B 1257478 400 ml dual cartridge
1214247* 15 liter pail 1010341 30 ml syringe 1257617 400 lb. drum, part A 1257612 400 lb. drum, part A 1257595 40 lb. pail, part A
40086 300 ml cartridge 1010320 300 ml cartridge 1257615 400 lb. drum, part B 1257609 400 lb. drum, part B 1257597 40 lb. pail, part B
40087 40 lb. pail 1010343* 40 lb. pail 1257594 400 lb. drum, part A
1257596 400 lb. drum, part B

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Silicones

LOCTITE® Silicone Potting Compound Properties Chart

105 LOCTITE® PRODUCT ITEM NUMBER PACKAGE TYPE & SIZE CURE SCHEDULE (Cure/Alt. Cure) VISCOSITY (cP) GEL TIME SHORE HARDNESS AGENCY APPROVALS

5031™ 40086 300 ml cartridge UV/visible light/moisture 5,500 Seconds A 34 N/A
NUVA-SIL® 40087 40 lb. pail 60 seconds @ 40 mW/cm2

Potting, Molding & Encapsulating 5040™ 40405 85 g tube Moisture 35,000 <3 hours A 30 MIL-A-46146B
40404 300 ml cartridge 24 hours @ 77°F (25°C) (skin over)
LOCTITE® SILICONE POTTING COMPOUNDS
5055™ 1212167 25 ml syringe 60 seconds @ 70 mW/cm2 525 Seconds A 55 ISO 10993 Compliant
1214246 1 liter bottle
5056™ 1214247* 15 liter pail 60 seconds @ 70 mW/cm2 2,200 Seconds A 43 ISO 10993 Compliant

5091™ 1214249 25 ml syringe UV/moisture 5,500 Seconds A 34 UL Classified
NUVA-SIL® 1214250 1 liter bottle 60 seconds @ 40 mW/cm2 for U.S.
1214248* 15 liter pail

17412 300 ml cartridge

5240™ 1010341 30 ml syringe 60 seconds @ 70 mW/cm2 18,000 Seconds A 45 ISO 10993 Compliant
NUVA-SIL® 1010320 300 ml cartridge UL 94V-0
5611F™ 1010343* 40 lb. pail Two-Part Part A - 5,000 19 minutes A 55 UL 94V-0
10:1 A:B Part B - 5,000 N/A
5611S™ 1385991 490 ml dual cartridge by volume N/A
1387908 4.5 gallon pail, part A 11 minutes tack-free Part A - 5,000 73 minutes A 55 N/A
5620™ 1387706 4.5 gallon pail, part B Part B - 5,000 UL 94-0
1386373 575 lb. drum, part A Two-Part
5623™ 1432213 440 lb. drum, part B 10:1 A:B Part A - 220 20 minutes** A 35
by volume Part B - 190
5625™ 1386378 490 ml dual cartridge 38 minutes tack-free Mixed - 200
1387908 4.5 gallon pail, part A
5640™ 1388496 4.5 gallon pail, part B Two-Part Part A - 700 120 minutes** OO 40
1386373 575 lb. drum, part A 30 minutes @ 77ºF (25ºC) Part B - 700
1387212 440 lb. drum, part B Mixed - 700
Two-Part
1257478 400 ml dual cartridge 1 hour @ 212ºF (100ºC) Part A - 1,000 100 minutes** OO 2
1257595 40 lb. pail, part A 24 hours @ 77ºF (25ºC) Part B - 2,000
1257597 40 lb. pail, part B Mixed - 1,500
1257594 400 lb. drum, part A Two-Part
1257596 400 lb. drum, part B 1 hour @ 212ºF (100ºC) Part A - 10,000 5 minutes A 30
24 hours @ 77ºF (25ºC) Part B - 1,000
1259300 400 ml dual cartridge
1257611 40 lb. pail, part A Two-Part
1257607 40 lb. pail, part B 10:1 A:B
1257612 400 lb. drum, part A by volume
1257609 400 lb. drum, part B 38 minutes tack-free

1257475 400 ml dual cartridge
1257616 40 lb. pail, part A
1257613 40 lb. pail, part B
1257617 400 lb. drum, part A
1257615 400 lb. drum, part B

1738359 490 ml dual cartridge
1738366 55 gallon drum, part A
1738365 5 gallon pail, part B

ITEMS IN RED = Source’s PICK or NEW

* Made-to-order item. ** Pot life.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

www.equipment.loctite.com

Silicone Equipment

YOUR EQUIPMENT Source 106

For more details, see the LOCTITE® Equipment
Sourcebook, LT-3669, or visit us on the web for additional
information, diagrams, products and our full line of
equipment at www.equipment.loctite.com.

LOCTITE® PRODUCT ITEM PRESSURE USED TO DISPENSE PACKAGE TYPE & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE Silicone Equipment
NUMBER REGULATION RANGE
PNEUMATIC CARTRIDGE DISPENSING SENSING ACCESSORIES

300 ML PNEUMATIC 98319A 0 to 60 psi Gel Cyanoacrylates, 300 ml cartridges Low to Pneumatic Cartridge Accessories
CARTRIDGE DISPENSING Anaerobic Gasketing, Medium – Page 177
RETAINER Light Cure/Acrylics,
Silicones

CARTRIDGE DISPENSING HD10 300 ML PNEUMATIC 1714379 0 to 60 psi Gel Cyanoacrylates, 300 ml cartridges Medium No
CARTRIDGE DISPENSER Anaerobic Gasketing, 250 ml tubes to High
Light Cure Acrylics,
Silicones

300 ML CARTRIDGE PUSHER 98022 0 to 50 psi Gel Cyanoacrylates, 300 ml cartridges Medium Yes
Anaerobic Gasketing, 250 ml tubes
Light Cure/Acrylics,
Low Viscosity Silicones

HIGH PRESSURE 1046901 0 to 725 psi Silicone, Polyurethane, 290 ml cartridges 10,000 to Yes Use with High Pressure
300 ML BENCHTOP MS Polymer Adhesives 300 ml cartridges 1,000,000 Dispense Valve (sold
CARTRIDGE 310 ml cartridges separately) – see below
DISPENSER

LOCTITE® PRODUCT ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT ACCESSORIES
HIGH VISCOSITY FLUID & PASTE VALVES
VA 25 DISPENSE 1838885 High Viscosity 10,000 to Drop, Silicones, MS Yes Yes Dispense Tips and
VALVE – 50 BAR
VALVES & PUMPS Fluid and 1,000,000 cP Bead Polymers, Urethanes Accessories –
HIGH PRESSURE
DISPENSE VALVE Paste Valves Pages 176-177
– 150 BAR
1153502 500,000 to Yes No
ITEMS IN RED = Source’s PICK or NEW 2,000,000 cP

Your Source for Motion Control Robot Dispense Systems. See page 171.

EQUIPMENT – Henkel is a full-service supplier of LOCTITE® branded equipment and offers a wide variety of equipment

services to its customers. For more LOCTITE® branded equipment, go to page 165.
Can't find what you're looking for? Visit www.equipment.loctite.com or call 1-800-LOCTITE (562-8483).

STRAIGHT FROM The Source

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Hot Melts

107 Your Application WHAT IS THE MOST IMPORTANT ASPECT WHEN CHOOSING
YOUR PRODUCT?
• Well-suited for fast, deep potting
applications requiring large gapPotting, Molding & Encapsulating Flame High Low Flowable
fills in high speed manufacturing Retardant Temperature Temperature,
environments General-Purpose

• Used for potting and encapsulating
in the electronics industry

Solution 7809FR™ 7811™ 1942™ 7901™

Color Amber Amber Tan Amber
Viscosity (cP) at Dispense 7,000 4,250 to 6,400 5,000 750
35
Temperature 35 35 30 300°F
Open Time (sec.) 240°F 266°F 142°F
Temperature Resistance
LOCTITE® 7809FR™ Hysol® LOCTITE® 7811™ Hysol® LOCTITE® 1942™ Hysol® LOCTITE® 7901™ Hysol®
Product Description Hot Melt Adhesive Hot Melt Adhesive Hot Melt Adhesive Hot Melt Adhesive

Fire Retardant High Temperature General-Purpose Polyamide

Modified with fire A high performance Medium setting, general- Low viscosity polyamide
retardant materials. It polyamide with exceptional purpose hot melt adhesive. used extensively for potting
has a UL 94V-O high temperature resistance Excellent adhesion to and encapsulating.
flammability rating. and impact resistance at wood and many plastics.
low temperatures. Not recommended for P/N Package Size
P/N Package Size high temperature potting 83342 40 lb. carton pellets
83675 applications.
Superstick 10 in. P/N Package Size
83676 32 lb. carton P/N Package Size
Polyshot 25 lb. pail 83340 Polyshot 25 lb. pail 83267
83338 40 lb. carton pellets 83269 40 lb. carton pellets
83274 Maxistick 35 lb. carton
Superstick 10 in.
83277 25 lb. carton
Polyshot 35 lb. carton

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

108

Hot Melts

LOCTITE® Hysol® Hot Melt Adhesive Properties Chart

LOCTITE® ITEM PACKAGE TYPE & SIZE COLOR VISCOSITY (cP) TENSILE OPEN TIME TEMPERATURE % SHORE AGENCY
PRODUCT NUMBER Tan AT DISPENSE STRENGTH RESISTANCE ELONGATION HARDNESS APPROVALS
TEMPERATURE 30
1942™ HYSOL® 83267 40 lb. carton pellets (psi) seconds 142°F 500 N/A FDA
83269 Maxistick 35 lb. carton 5,000 CFR175.105
83274 Superstick 10 in. 25 lb. carton 250
83277 Polyshot 35 lb. carton
LOCTITE® HYSOL® HOT MELT ADHESIVES
7809FR™ HYSOL® 83675 Superstick 10 in. 32 lb. carton Amber 7,000 363 35 240°F 373 A 85 UL Classified
ADDITIONAL
RESOURCES83676 Polyshot 25 lb. pailsecondsfor U.S.

7811™ HYSOL® 83340 Polyshot 25 lb. pail Amber 4,250 400 35 266°F 1,200 N/A N/A
83338 40 lb. carton pellets Amber 6,400
seconds
750
7901™ HYSOL® 83342 40 lb. carton pellets 260 35 300°F 80 A 84 N/A

seconds

You can find more LOCTITE® Hot Melt Adhesives
in the bonding section on pages 13-16.
Please see pages 109-110 for LOCTITE® Hot Melt
applicators.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

www.equipment.loctite.com

Hot Melt
Equipment

YOUR EQUIPMENT Source

For more details, see the LOCTITE® Equipment
Sourcebook, LT-3669, or visit us on the web for additional

109 information, diagrams, products and our full line of

equipment at www.equipment.loctite.com.

Hot Melt Equipment LOCTITE® PRODUCT ITEM STICK DIAMETER DISPENSE DISPENSE POWER DISPENSE HOT MELT HOT MELT NOZZLES
NUMBER MELT RATE TEMPERATURE CHEMISTRY & ACCESSORIES
HANDHELD HOT MELT DISPENSERS 1/2 INCH SUPERSTICK DISPENSERS
HYSOL® 050A 916282 1/2 in. Superstick Sticks 4 lbs./hr. Manual 383°F EVA/Polyolefin Hot Melt Nozzles and
(195°C) Accessories – Page 110

HYSOL® 050A-HT 1597635 1/2 in. Superstick Sticks 4.4 lbs./hr. Manual 419°F Polyamide
(215°C)

3/4 INCH MAXISTICK DISPENSERS 98033 3/4 in. Maxistick Sticks 9 lbs./hr. Manual 360°F EVA Hot Melt Nozzles and
HYSOL® 075 5 lbs./hr. Manual (182°C) CoolMelt™ Accessories – Page 110

HYSOL® 075-LT 98034 3/4 in. Maxistick Sticks 249°F
(121°C)

1 3/4 INCH SPRAYPAC™ & POLYSHOT DISPENSERS

HYSOL® 175-AIR 98036 1 3/4 in. Polyshot Sticks 8 lbs./hr. Electric 383°F EVA/Polyolefin Hot Melt Nozzles and
8 lbs./hr. Electric (195°C) Accessories – Page 110
8 lbs./hr. Electric Polyamide
HYSOL® 175-AIR-HT 98040 1 3/4 in. Polyshot Sticks 8 lbs./hr. Electric 419°F
6.6 lbs./hr. Manual (215°C) EVA/Polyolefin
HYSOL® 175-SPRAY 98037 1 3/4 in. Polyshot Sticks
383°F Polyamide
HYSOL® 175-SPRAY-HT 98041 1 3/4 in. Polyshot Sticks (195°C)
EVA/Polyolefin
HYSOL® 175 98035 1 3/4 in. Polyshot Sticks 419°F and Polyamide
(215°C)

383°F
(195°C)
and 419°F
(215°C)*

URETHANE DISPENSER 98011 N/A 3 lbs./hr. Air 249°F Reactive Hot Melt Nozzles and
(121°C) Urethane Accessories – Page 110
HYSOL® REACTIVE
URETHANE CARTRIDGE
DISPENSER

* The LOCTITE® Hysol® 175 Dispenser (manual electric) is supplied with both temperature modules.

For custom hot melt dispense nozzles, contact the
Special Equipment Group of Henkel at
1-800-LOCTITE (562-8483).

STRAIGHT FROM The Source

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® PRODUCT ITEM NUMBER DESCRIPTION www.equipment.loctite.com

1611450 Replacement Nozzle/Check Valve USED WITH
1597635

419115 Adapter/Check Valves for Nozzles 98035, 98036, 98040
Standard Nozzle Adapter with Check Valve and Jam Nut 916282
(SINGLE PACK) 98033, 98034

916050

(5 PACK)

ANZ023N01

985225 1-Hole Nozzle 98033, 98034, 98035, 110
0.08" diameter cone tip (5 pack) 98036, 98040
(5 PACK)
2-Hole Nozzle 98033, 98034, 98035, 98036,
985110 0.06" diameter x 0.39" spacing 98040, 98544, 98545
985111
985112 3-Hole Nozzle 98033, 98034, 98035, 98036, Hot Melt Equipment
985113 0.06" diameter x 0.20" spacing 98040, 98544, 98545
985114
985115 Diagonal Extension Nozzle 98033, 98034, 98035, 98036,
985122 Tip = 0.14" diameter x 1.23" long 98040, 98544, 98545

Needle Extension Nozzle 98033, 98034, 98035, 98036,
Tip = 0.05" diameter x 1.32" long 98040, 98544, 98545

HOT MELT NOZZLES & ACCESSORIES Spreader Extension Nozzle 98033, 98034, 98035, 98036,
Tip = (0.09" x 0.25") x 1.32" long 98040, 98544, 98545

L-Nozzle 98033, 98034, 98035, 98036,
0.06" diameter x 0.85" offset 98040, 98544, 98545

Standard Medium Spray Nozzle 1.25" to 5" diameter pattern 98037, 98041

985211 Narrow Spray Nozzle 98037, 98041
985216 0.05" to 1.25" diameter pattern 98037, 98041
984261 98011
984262 Ultra-Wide Spray Nozzle 98011
984263 1.5" to 6.0" diameter pattern 98011
984264 98011
984268 Standard Adapter for 98011
984272 300 ml Cartridges 98011
985397 All Pneumatic Applicators
Standard 1-Hole Nozzle 0.098" diameter
cone tip, with integral check valve
(includes protective cap)
Adapter/Check Valve for
Specialty Nozzles

Needle Jet Nozzle Tip = 0.051" diameter x 1.26" long
(requires 984263 adapter)

3-Hole Nozzle
0.06" diameter x 0.20" spacing (requires 984263 adapter)

Injection Needle Nozzle with Integral Check
ValveTip = 0.059" diameter x 0.197" long

Air Line Filter, Regulator, 5 Micron Filter Gauge
0 to 150 psi

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Low Pressure Molding

111 Your Application WHAT TYPE OF MOLDING MATERIAL DO YOU NEED?

• Low-pressure, high-speedPotting, Molding & Encapsulating High Rigidity
molding with adhesives for
fragile and delicate components Highest Hardness

• Short cycle times and simple
single-step process

• Encapsulation of components
provides complete sealing and
subsequent environmental
resistance.

Good Adhesion Amber Black Exposure to
Sunlight

Solution PA 7838™ PA 7841™ PA 7846™ PA 7848™
BLACK BLACK BLACK
Color
Hardness (Shore A) Black Amber Black Black
Maximum Working 90A 92A 92A 93A

Temperature (°C) 130 130 130 130
Viscosity at 210°C (cP) 3500 7000 7000 7300

Product Description TECHNOMELT® PA 7838™ TECHNOMELT® PA 7841™ TECHNOMELT® PA 7846™ TECHNOMELT® PA 7848™
BLACK BLACK BLACK
Moldable amber polyamide
Moldable black polyamide that can be used where Moldable black polyamide Moldable black polyamide
for higher temperature high strength and hardness that can be used where with improved UV stability
applications, with service are needed, such as with high strength and hardness that is suitable for outdoor
temperatures up to 130°C computer connectors. are needed, such as with applications.
(266°F). computer connectors.
P/N Package Size P/N Package Size
P/N Package Size 1762906 44 lb. bag P/N Package Size 1764108 44 lb. bag
1762953 44 lb. bag 1764113 44 lb. bag

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

112

High Flexibility Low Pressure Molding

High Temperature Resistance

Amber Black High Relative Exposure to Cold Temperature Superior Adhesion
Thermal Index Sunlight Performance to Low Surface
Energy Materials
(RTI)

PA 7873™ PA 7878™ PA 7808™ PA 7844™ PA 7857™ AS 7875™
BLACK BLACK BLACK BLACK

Amber Black Black Black Black Opaque White
90A 90A 82A 76A 77A 45A

140 140 110 110 100 100
3000 3000 3000 10000 4000 2200

TECHNOMELT® PA 7873™ TECHNOMELT® PA 7878™ TECHNOMELT® PA 7808™ TECHNOMELT® PA 7844™ TECHNOMELT® PA 7857™ TECHNOMELT® AS 7875™
BLACK BLACK BLACK BLACK
Moldable amber polyamide Moldable polyolefin hot
with good adhesion Moldable black polyamide Moldable black polyamide Moldable black polyamide Moldable black polyamide melt for applications
for higher temperature with good adhesion with excellent adhesion with improved UV stability that can be used where demanding moisture and
applications up to 140°C for higher temperature to tough substrates and that is suitable for outdoor excellent adhesion and cold solvent resistance. It
(284°F). applications up to 140°C superior flexiblity. This applications. Enhanced temperature flexibility are exhibits excellent adhesion
(284°F). product is ideal for strain adhesion to low surface important. to low surface energy
P/N Package Size relief on cables and wires energy plastics compared plastics.
1763724 44 lb. bag P/N Package Size and for the encapsulation to other polyamides. P/N Package Size
1762904 44 lb. bag of heat-producing 1762909 44 lb. bag P/N Package Size
components in electrical P/N Package Size 1762907 55 lb. bag
devices. Has a UL RTI of 1925259 40 lb. bag
95°C (203°F).

P/N Package Size

1762910 44 lb. bag

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Low Pressure Molding

Process

Traditional Potting Process Flow

113 MOLD HOUSING PALLETIZE INSERT
COMPONENTS
DISPENSE AND SETTLING OR TEST
ENCAPSULATE VACUUM CURE

Potting, Molding & Encapsulating Low Pressure Process Flow

INSERT OVERMOLD TEST
COMPONENTS

Key Benefits Sustainability

Design • Zero waste
• All excess material and scrap are recyclable
• Additive design allows for alternative solutions (simplified • Natural ingredients
process vs. traditional technologies)
Through the combination of Product, Process
• Functional design removes process steps and Design, Low Pressure Molding with
• Improved look and image TECHNOMELT® delivers customers an
advanced and environmentally sustainable
Process solution to component protection.

• Reduces total cost of ownership (TCOO)
• Increased throughput
• Low capital equipment costs and reduced footprint
• Low viscosity materials allow for low injection pressures

Products

• Adhesion to multiple surfaces
• Complete watertight encapsulation
• Safe, 1-component, UL 94-V0 approved
• High temperature resistance
• Compliant materials suitable for sensitive electrical

and telecommunication components
• Less handling and shorter process
• No cure process required

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

TECHNOMELT® Low Pressure Molding Properties Chart

TECHNOMELT® TYPE ITEM # COLOR HARDNESS TENSILE % ELONGATION WORKING AGENCY LISTING
PRODUCT Polyamide 1762932 Amber (SHORE A) STRENGTH (PSI) TEMPERATURE
UL 94V0,
PA 7808™ 82A 520 600 RANGE 95°C RTI

-40°C to 110°C

PA 7808™ BLACK Polyamide 1762910 Black 82A 520 450 -40°C to 110°C UL 94V0,
750 300 95°C RTI
PA 7833™ Polyamide 1762931 Amber 90A 750 300 114
Black 90A 1310 650 -40°C to 130°C UL 94V0
1310 650
PA 7838™ BLACK Polyamide 1762953 1310 550 -40°C to 130°C UL 94V0
460 400
PA 7841™ Polyamide 1762906 Amber 92A 390 350 -10°C to 130°C — Low Pressure Molding
800 400
TECHNOMELT® LOW PRESSURE MOLDINGS PA 7846™ BLACK Polyamide 1764113 Black 92A 800 400 -40°C to 130°C UL 94V0
1000 700
PA 7848™ BLACK Polyamide 1764108 Black 93A 580 250 -40°C to 130°C UL 94V2, f2
120 400 rating for outdoor
weatherability

PA 7852™ Polyamide 1762908 Amber 77A -40°C to 100°C UL 94V0

PA 7857™ BLACK Polyamide 1762909 Black 77A -40°C to 100°C UL 94V0

PA 7873™ Polyamide 1763724 Amber 90A -40°C to 140°C UL 94V0

PA 7878™ BLACK Polyamide 1762904 Black 90A -40°C to 140°C UL 94V0

PA 7844™ BLACK Polyamide 1925259 Black 76A -20°C to 110°C —

PA 649™ BLACK Polyamide 1860722 Black 88A -40°C to 100°C —

AS 7875™ Polyolefin 1762907 Opaque White 45A -30°C to 100°C —

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

115 Repairing, Rebuilding & Restoring

Repairing, Rebuilding & Restoring 115 REPAIRING, REBUILDING & RESTORING

117 Belt Repairs & Urethanes
119 Maintenance & Repair Epoxies

WHY USE LOCTITE® REPAIRING, WHAT IS THE PROPER SURFACE
REBUILDING AND RESTORING PREPARATION FOR REPAIR EPOXIES?
PRODUCTS?
A properly prepared surface is one that has been cleaned, dried
The LOCTITE® Fixmaster® products are designed to optimize and abraded. Substrates should be free from contamination,
performance on various substrates. Substrate is the most including oils, grease, dust, etc. It is also important that a
important factor when choosing a repair, rebuild or restoring surface is dry* before working with a repair epoxy because
product. The correct product for each substrate will make moisture on the surface can interfere with the curing process.
a significant impact on the integrity of the repair. We The final step is to abrade the surface to provide an increased
offer solutions for permanent as well as temporary fixes, surface area for bonding. When working with metals, the
providing proven savings for processes and applications. surface should be abraded to a near-white metal finish, which
also helps to ensure that all surface corrosion is removed.
TRADITIONAL METHODS VS. LOCTITE®
MODERN SOLUTIONS APPLICATIONS:

Traditional methods of repair, such as part replacement and • Pump
custom manufacturing, are high cost solutions compared with • Gearbox
using LOCTITE® Fixmaster® Repairing, Rebuilding and Restoring • Concrete Repair
products. You can find a quick remedy and return parts to • Conveyor Systems
service with little interruption and downtime to your process. • Shaft Repair

KEY BENEFITS OF LOCTITE® REPAIRING, INDUSTRIES:
REBUILDING AND RESTORING PRODUCTS:
• Mining
• Cost savings • Wastewater
• Power Generation
• Minimal down time • Food Processing
• Pulp and Paper
• Improved safety • Beverage

• Epoxies can be drilled and tapped after cure * LOCTITE® Fixmaster® Wet Surface Repair Putty and LOCTITE® Fixmaster® Underwater Repair
Epoxy have been specially formulated to cure in wet or underwater applications.
• Available in varying viscosities and kneadable form

• Available in colors to match varying metals

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

Repairing, Rebuilding & Restoring 116 Repairing, Rebuilding & Restoring

Henkel Adhesive and Sealant Product Specialists are available to assist you with
new product designs, or to help you re-engineer an existing application for
improved performance and cost savings. They can also set up testing of your
parts at the Henkel Customer Engineering Center. For application assistance,
call 1-800-LOCTITE (562-8483); within Canada, call 1-800-263-5043; or, contact us
through the web at www.henkelna.com/loctite.

STRAIGHT FROM The Source

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Belt Repairs
& Urethanes

117 Your Application Repairing, Rebuilding & Restoring CONVEYOR BELT REPAIR
Is this a temporary or a long-term repair?
Belt Repairs:
• Provide durable, tough, and Short-Term Long-Term

flexible repairs of conveyor Do you require a fast return to service
belts and other damaged rubber or a long working time?
equipment quickly and easily
Fast Return to Service Longer Working Time
Urethanes:
• Can be troweled, cast or brush- Fixmaster® Fixmaster® Fixmaster®
Instant Belt Repair Rapid Rubber Repair Flex™ Conveyor Belt
applied to rebuild or protect
critical operating equipment Urethane Repair Kit

• Provide protection from impact,
abrasion and corrosion

• Nonshrinking and unaffected by
oil, grease and water

• Maximum adhesion and product
reliability ensured by use of
recommended accessories

Solution

Color Amber Black Black

Working Time N/A 1 min. 10 min.

Tensile Strength 400 psi 1,300 psi 1,500 psi
2 hrs. 8 hrs.
Functional Cure 30 min.
LOCTITE® Fixmaster® LOCTITE® Fixmaster®
Product Description LOCTITE® Fixmaster® Rapid Rubber Repair Urethane Flex™ Conveyor Belt Repair Kit
Instant Belt Repair
Fixmaster® Rapid Rubber A single-component, heat-curing Our premium quality belt repair Makes long-lasting belt repairs.
Repair Dispenser material for fast, temporary belt product is designed to repair Recommended for applications where
repairs. Requires no priming. conveyor belts and other damaged speed of application is not critical.
Handheld, manually operated Equipment can be operated in rubber equipment quickly and easily. Cures in 8-12 hours. Kit includes
dispenser designed specifically 30 minutes. Repairs will have the same durability resin, hardener, cleaner, etching
for use with LOCTITE® Fixmaster® and flexibility as the belt. The 400 agent, brushes and plastic trowels.
Rapid Rubber Repair. P/N Package Size ml cartridge requires the use of
Description: 37719 1 lb. bottle a LOCTITE® Rapid Rubber Repair P/N Package Size
• Two-part adhesives Dispenser (part number 1372751). 98693 1 lb. kit
• 400 ml cartridges
• Medium- to high-viscosity range

1372751 Universal Fixmaster® Dispenser
243335 Rapid Rubber Nozzle
Item # P/N Package Size

ADDITIONAL RESOURCES 96677 400 ml kit
96675 400 ml cartridge
96676 150 ml coaxial cartridge

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Fixmaster® Belt Repair & Urethane Applications Chart

LOCTITE® CASTING CONVEYOR CONVEYOR COATING CHUTES, REBUILDING FORMING 118
PRODUCT MOLDS, BELT REPAIR BELT REPAIR IMPELLERS, HOPPERS, RUBBER EXPANSION
FIXTURES, (LONG-TERM) (TEMPORARY) DEFLECTION PARTS LINING
FIXMASTER® RAPID PARTS FEEDER PLATES PUMPS JOINTS
RUBBER REPAIR BOWLS

FIXMASTER® FLEX™ ▲ △△
CONVEYOR BELT
REPAIR KIT △ Belt Repairs & Urethanes

FIXMASTER® INSTANT ▲
BELT REPAIR
△ ▲▲ ▲
FIXMASTER® FLEX
80™ PUTTY ▲△ ▲

FIXMASTER® FLEX
80™ LIQUID

△ Good Choice ▲ Preferred Choice

LOCTITE® Belt Repair & Urethane Properties Chart

LOCTITE® ITEM PACKAGE COLOR COVERAGE MAXIMUM ADHESIVE % SHORE WORKING FUNCTIONAL MIX RATIO MIX RATIO AGENCY
PRODUCT NUMBER TYPE & SIZE (IN.2 AT 1/4 IN. OPERATING TENSILE ELONGATION HARDNESS TIME CURE BY VOLUME BY WEIGHT APPROVALS
TEMPERATURE STRENGTH (psi)
FIXMASTER® 96677 400 ml kit THICKNESS) (MINUTES) (HOURS) (RESIN: (RESIN:
RAPID RUBBER 96675 400 ml (°F) HARDENER) HARDENER)
REPAIR URETHANE 96676 cartridge
150 ml coaxial Black 188 180 1,300 360 A 82 1 2 1:1 N/A N/A
FIXMASTER® 98693 cartridge 188
FLEX™ CONVEYOR 1 lb. kit 33
BELT REPAIR KIT 37719
BELT REPAIR 1 lb. bottle Black 94 180 1,500 350 A 87 10 8 100:40 72:28 N/A
FIXMASTER® 97423
INSTANT BELT 97422 1 lb. kit Yellow 115 150 400 650 A 65 N/A 30 min. N/A N/A N/A
REPAIR 97413 6 lb. kit
GENERAL REPAIR 97412 Black 94 180 1,500 350 A 87 10 8 100:40 72:28 ABS
FIXMASTER® 1878840 1 lb. kit 564 180 1,800 350 A 87 20
FLEX 80™ PUTTY 1878379 6 lb. kit 250 N/A N/A N/A 1 8 100:13.3 77:23 N/A
Black 27 in.3
FIXMASTER® 2 gallon pail 162 in.3 24 to 48 1:1 1:0.924 N/A
FLEX 80™ LIQUID 1 gallon pail
White N/A
MR 5898™

Properties based on mixing a 1 lb. unit at 77°F, seven days’ cure.

LOCTITE® Belt Repair Accessories Chart

LOCTITE® PRODUCT ITEM NUMBER PACKAGE DESCRIPTION COVERAGE COLOR

ETCHING AGENT Enhances bonds 99626 3 fl. oz. bottle 190 in2 or Clear
to rubber 4 fl. oz. can approximately Clear
1 can of each
BELT REPAIR ACCESSORIES FLEX™ CLEANER Cleans and 39636 product for 2 lbs. Need additional mix nozzles for DISPENSE NOZZLES
primes surfaces 1372751 of urethane LOCTITE® Fixmaster® Rapid Rubber
Repair Dispenser?
N/A
• Order Item Number 39633 (6 pk.).
FIXMASTER® RAPID Dispenser Required for use with 400 ml cartridge of Fits 400 ml cartridge.
RUBBER REPAIR LOCTITE® Fixmaster® Rapid Rubber Repair.
(Item Number 1372751 is not included in the • Order Item Number 98667 (10 pk.).
FIXMASTER® RAPID Static mixers 243335 96677 kit and must be ordered separately.) Fits 150 ml cartridge.
RUBBER REPAIR 874905
Packaged 6/bag – for mixing and dispensing LOCTITE®
Fixmaster® Rapid Rubber Repair in a 400 ml cartridge.
Packaged 10/pack – for mixing and dispensing Loctite®
Fixmaster® Rapid Rubber Repair in a 150 ml coaxial cartridge.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Maintenance &
Repair Epoxies

119 Your REPAIR OR REBUILD DAMAGED PARTS
Application What material are you filling?

Repairing, Rebuilding & Restoring • High compressive Mild Steel
strength
Pourable Putty Kneadable High
• Choice of mild Stick Performance
steel aluminum or Fixmaster®
nonmetallic fillers Steel Liquid Chemical
Resistance
• Can be machined,
drilled or tapped
after cure

• Excellent
resistance to
aggressive
chemicals

Solution Fixmaster® Fixmaster® Fast Fixmaster® Metal Fixmaster®
Steel Putty
Set Steel Putty Magic Steel™ Superior Metal

Color Grey Grey Grey Dark Grey Grey
225°F (107°C) 225°F (107°C) 200°F (93°C) 250°F (121°C) 250°F (121°C)
Maximum
Temperature 25 min. 30 min. 3 min. 3 min. 20 min.
6 hrs. 6 hrs. 10 min. 10 min. 6 hrs.
Working Time* 13,500 psi 11,100 psi 10,800 psi 12,000 psi 18,000 psi

Cure Time* LOCTITE® Fixmaster® LOCTITE® Fixmaster® LOCTITE® Fixmaster® LOCTITE® Fixmaster® LOCTITE® Fixmaster®
Steel Liquid Steel Putty Fast Set Steel Putty Metal Magic Steel™ Superior Metal
Compressive
Strength High steel content. High steel content putty. A fast curing version of Kneadable, two-part Formulated with fine
Pourable liquid filler used Recommended for steel putty. Recommended paste. Working time is alloy particles for high
Product for making fixtures and repairing and rebuilding for repairing pipes and 3 minutes – sets in 10 compressive strength
Description molding. worn steel components, other emergency repairs. minutes. Adheres to damp and chemical resistance.
ABS Approved. such as bearing and fan ABS Approved. surfaces. Can be drilled, Recommended for use on
housings. filed and painted. Ideal all metals. Outstanding
P/N Package Size ABS Approved. P/N Package Size for emergency sealing of compressive strength,
39917 1 lb. kit leaking tanks and pipes. chemical resistance,
97483 1 lb. kit Smooths welds, repairs non-rusting.
97484 4 lb. kit P/N Package Size small cracks in castings
and fills oversized bolt
99913 1 lb. kit holes. P/N Package Size
99914 4 lb. kit NSF/ANSI 61 Certified.
99912 25 lb. kit 97473 1 lb. kit
40900 4 kg kit

P/N Package Size
98853 4 oz. stick

* At 77°F (25°C).

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

120

Aluminum Maintenance & Repair Epoxies

Pourable Putty

Fixmaster® Fixmaster®

Aluminum Liquid Aluminum Putty

Light Grey Light Grey Your Source for SUPERIOR METAL
200°F (93°C) 200°F (93°C)
LOCTITE® Fixmaster® Superior Metal 6-Step Process
20 min. 20 min.
6 hrs. 6 hrs.
17,000 psi 11,300 psi

LOCTITE® Fixmaster® LOCTITE® Fixmaster® STEP 1: STEP 2: STEP 3:
Aluminum Liquid Aluminum Putty Clean completely. Gather product. Prepare product.

Fluid, self-leveling General-purpose,
aluminum liquid. Can be aluminum putty for repair
poured into molds and of all aluminum alloy
cavities. Recommended components.
for casting aluminum ABS Approved.
replacement parts and for
making molds. P/N Package Size
ABS Approved. 97463 1 lb. kit

P/N Package Size STEP 4: STEP 5: STEP 6:
97453 1 lb. kit Mix completely. Apply. Set.

VISCOSITY AND WORKING TIME HELPFUL HINTS
• The working time of an epoxy is the time required for

the viscosity to double. Once the viscosity has doubled,
epoxies are generally very hard to work with, so jobs
should be completed before this time.
• Increasing the temperature of the product or substrate
can increase the cure speed of an epoxy and initially
reduce the viscosity.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Maintenance &
Repair Epoxies

LOCTITE® Fixmaster® Maintenance & Repair Epoxy Properties Chart

LOCTITE® ITEM PACKAGE COLOR COVERAGE MAXIMUM COMPRESSIVE TENSILE SHORE WORKING FUNCTIONAL MIX RATIO MIX RATIO AGENCY
PRODUCT NUMBER TYPE & TEMPERATURE† STRENGTH† STRENGTH† HARDNESS TIME CURE BY VOLUME BY WEIGHT APPROVALS
SIZE
(°F) (psi) (psi)

121 FIXMASTER® 98853 4 oz. Grey 16 in.2** 250 12,000 2,500 D 80 3 minutes 10 N/A N/A NSF 61

METAL MAGIC stick minutes

EPOXY STICKS STEEL™*

FIXMASTER® 39366 4 oz. Grey 16 in.2** 250 12,000 2,500 D 80 4 to 7 10 N/A N/A N/A
minutes minutes
CONCRETE stick

Repairing, Rebuilding & Restoring REPAIR EPOXY

FIXMASTER® 82093 4 oz. White 16 in.2** 300 12,000 900 D 70 15 30 N/A N/A CFIA Listed
minutes minutes
UNDERWATER stick

REPAIR EPOXY§

FIXMASTER® 97483 1 lb. kit Grey 13 in.3 225 13,500 6,000 D 86 25 6 hours 4:1 9.5:1 ABS, CFIA
STEEL LIQUID* 97484 4 lb. kit 52 in.3 minutes Listed, NEHC,
POURABLE NAVSEA

FIXMASTER® 97453 1 lb. kit Aluminum 17 in.3 200 17,000 6,000 D 85 20 6 hours 5:1 9:1 ABS, CFIA
ALUMINUM minutes Listed, NEHC,
LIQUID* NAVSEA

FIXMASTER® 97473 1 lb. kit Dark Grey 0.25 ft.2** 250 18,000 5,500 D 90 20 6 hours 4:1 7.25:1 CFIA Listed
SUPERIOR minutes
METAL* 40900 4 kg kit 2.2 ft.2**

FIXMASTER® 99913 1 lb. kit Grey 0.3 ft.2** 225 11,100 4,900 D 85 30 6 hours 2.5:1 6.25:1 ABS, CFIA
STEEL PUTTY* 99914 4 lb. kit 1.2 ft.2** minutes Listed, NEHC,
99912 25 lb. kit 7.5 ft.2** NAVSEA
TROWELABLE
FIXMASTER® 97463 1 lb. kit Aluminum 0.5 ft.2** 200 11,300 4,000 D 87 20 6 hours 4:1 6.3:1 ABS, CFIA
ALUMINUM minutes Listed, NEHC,
PUTTY* NAVSEA

FIXMASTER® 97443 1 lb. kit Grey 0.25 ft.2** 225 12,000 4,600 D 85 20 6 hours 4:1 9:1 ABS, CFIA
STAINLESS minutes Listed, NEHC,
STEEL PUTTY* NAVSEA

FIXMASTER® 39917 1 lb. kit Grey 0.4 ft.2** 200 10,800 4,600 D 80 3 minutes 10 1:1 1.8:1 ABS, CFIA
FAST SET minutes Listed, NEHC,
STEEL PUTTY* NAVSEA

LOCTITE® ITEM PACKAGE COLOR MAXIMUM TENSILE WORK LIFE FIXTURE TIME‡ FULL CURE AGENCY
PRODUCT NUMBER TYPE & SIZE (CURED) TEMPERATURE† STRENGTH† (psi) 3 minutes (HOURS) APPROVALS

HIGH FIXMASTER® FAST SET 96604 50 ml cartridge Grey (°F) 2,600 6 to 8 minutes 7 CFIA Listed
PERFORMANCE STEEL EPOXY*
200
FIXMASTER® WEAR
RESISTANT PUTTY* 98742 1 lb. kit Grey 225 1,450 30 minutes 1 hour 6 ABS, CFIA Listed,
98743 3 lb. kit NEHC, NAVSEA
FIXMASTER® 2000° PUTTY* 675
95724 8 oz. can Grey 2000 2,000 30 minutes 1 hour 7 N/A
FIXMASTER® FAST CURE 2,300 5 minutes
SPECIALTY EPOXY MIXER CUPS 21425 10 – 0.12 fl. oz. cups Grey 180 1 minute 10 minutes 12 N/A
PRODUCTS FIXMASTER® FAST 21426 10 – 1 oz. cups
CURE POXY PAK™ ABS, CFIA Listed
1324007 1 oz. oval syringe Translucent 300 5 minutes 1
MANUAL CARTRIDGE
APPLICATORS APPLICATOR 98472 Required for use with Loctite® Fixmaster® 50 ml cartridges. (Item No. 98455 is also required and must be ordered separately.)
98455 For more information on spare parts, nozzles and accessories, please visit www.equipment.loctite.com.
STATIC MIX NOZZLES
Packaged 10/bag – for mixing and dispensing Loctite® Fixmaster® 50 ml cartridges.
For more information on spare parts, nozzles and accessories, please visit www.equipment.loctite.com.

ITEMS IN RED = Source’s PICK or NEW * Properties are based on mixing 1 lb. mass at 77°F, seven days’ cure. ‡ Time to reach handling strength.
** At 1/4 in. thickness. § Properties based on ultimate cure. Epoxy properties based on mixing 20 g mass at 77ºF.
† Ultimate cure.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Fixmaster® Maintenance & Repair Epoxy Applications Chart

LOCTITE® EMERGENCY CORROSION REPAIRING REBUILDING REPAIRING RESTORING PUMP REPAIRING FIXTURES & REBUILDING REPAIRING REPAIRING FORMING WET
PRODUCT METAL PROTECTION PIPES & SHAFTS, THREADED TUBE SHEETS REPAIR ENGINE PROTOTYPES IMPELLERS ALUMINUM STAINLESS MOLDS & SURFACE
REPAIRS TANKS BLOCKS & VALVES FIXTURES REPAIRS
FIXMASTER® KEYWAYS & PARTS PARTS STEEL PARTS
METAL MAGIC BEARINGS △
STEEL™
▲△ ▲▲ Q
FIXMASTER®
EPOXY STICKS CONCRETE △ △ ▲
REPAIR EPOXY
△△
FIXMASTER®
UNDERWATER 122
REPAIR EPOXY
POURABLE ▲ ▲△ ▲
FIXMASTER®
STEEL LIQUID ▲ ▲△▲

FIXMASTER® ▲▲ ▲ ▲ ▲▲ ▲ Maintenance & Repair Epoxies
ALUMINUM ▲
LIQUID ▲△ ▲
△
TROWELABLE FIXMASTER® △ ▲ ▲△
SUPERIOR ▲▲
METAL ▲ △▲

FIXMASTER® △
STEEL PUTTY

FIXMASTER®
ALUMINUM
PUTTY

FIXMASTER®
STAINLESS
STEEL PUTTY

FIXMASTER®
FAST SET
STEEL PUTTY

ITEMS IN RED = Source’s PICK or NEW △ Good Choice ▲ Preferred Choice ■ Acceptable Choice

LOCTITE® Fixmaster® Maintenance & Repair Epoxy Bonding Characteristics

LOCTITE® GAP FAST FERROUS TOUGHENED SHOCK WATER PLASTIC RUBBER METAL SANDABLE PAINTABLE
PRODUCT FILLING BONDING BONDING BONDING FINISH FINISH
CURE TIME METAL REPAIR FORMULATION RESISTANT RESISTANT
FIXMASTER® FAST
HIGH PERFORMANCE SET STEEL EPOXY △▲▲ △▲Q

FIXMASTER® WEAR ▲ ▲▲△ Q
RESISTANT PUTTY

SPECIALTY FIXMASTER® 2000° PUTTY ▲ ▲ QQ
PRODUCTS

△ Good Choice ▲ Preferred Choice ■ Acceptable Choice

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

123 Retaining

Retaining 123 RETAINING

125 Retaining Compounds
129 Retaining Compound Equipment

WHY USE A LOCTITE® RETAINING ADVANTAGES OF LOCTITE® RETAINING
COMPOUND? COMPOUNDS AS COMPARED TO
CONVENTIONAL ASSEMBLY METHODS:
LOCTITE® Retaining Compounds secure bearings, bushes and
cylindrical parts into housings or onto shafts. They achieve • High-strength products can carry high loads
maximum load transmission capability and uniform stress • Fill all voids to prevent corrosion and fretting
distribution and eliminate fretting corrosion. Applied as a • 100% contact – load and stress is distributed evenly over
liquid, they form 100% contact between mating metal surfaces,
eliminating the need for expensive replacement parts, time the joint
consuming machining or the use of mechanical methods.
ADVANTAGES OF LOCTITE® RETAINING COMPOUNDS
LOCTITE® RETAINING COMPOUNDS FILL THE IN COMBINATION WITH SHRINK FITS OR PRESS FITS:
INNER SPACE BETWEEN COMPONENTS AND CURE
TO FORM A STRONG PRECISION ASSEMBLY. • Higher load transmission and performance with existing
design and geometry solutions
LOCTITE® Retaining Compounds are superior to conventional
assembly methods, including: • Equal performance by lower interference/
lighter construction
• Pins, key/keyway assemblies: These have uneven
distribution of mass, an imbalance that can lead to Henkel Adhesive and Sealant Product Specialists are
vibration at high speeds. available to assist you with new product designs, or to
help you re-engineer an existing application for improved
• Splines: They cause high stresses due to the “notch performance and cost savings. They can also set up testing
effect” that occurs. Splines can also result in high of your parts at the Henkel Customer Engineering Center.
machining costs and backlash between drive For application assistance, call 1-800-LOCTITE (562-8483);
and overrun. within Canada, call 1-800-263-5043; or, contact us through
the web at www.henkelna.com/loctite.
• Clamp rings, press fits, shrink fits, and taper fits: They
rely on friction alone to transmit torque; therefore, STRAIGHT FROM The Source
they are limited by material, surfaces and design. Close
tolerances are needed to obtain specific load capacities,
leading to higher production costs. Interference
fitting creates stresses in the components that can
lead to failure, particularly when combined with
operational stresses.

• Welding and soldering: Only compatible metals can
be joined, and the parts can be distorted by the high
temperatures required. Heating of the material can
lead to residual stresses and structural degradation
and distortion. Disassembly can also be difficult
or impossible.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

Retaining 124

Retaining

LOCTITE® adhesive mounting of cylindrical parts has distinct RELATIVE PRODUCTION COSTS 5.0
advantages over mechanical assembly alone. Using LOCTITE®
retaining compounds allows a manufacturer to use slip-fitted parts 5
with relaxed machining tolerances. LOCTITE® retaining compounds
can reduce the size and weight of an assembly, reduce the number 4
of components needed, and ultimately save money by reducing the
overall manufacturing cost. 3.7

COST BENEFITS 3

• Reduce or eliminate expensive machining operations 2
• Eliminate some surface finishing requirements
• Prolong equipment life through better fatigue and 1

corrosion resistance 0.8 0.9 1.0
• Fill gaps so machining tolerances can be widened
• Help lower overall assembly and maintenance costs 0
• Simplify assemblies by reducing use of circlips, keys, dowels
Bonded Bonded Interference Keyed Splined
or threads Fit Shaft
• Can eliminate the need for mechanical retainers Interference* Fit
• Minimize machine downtime ensuring an earlier return
Cost is always an essential part of the selection process.
to service When LOCTITE® Retaining Compounds are used, considerable
cost benefits result.
PERFORMANCE BENEFITS
Typical interference fit has LOCTITE® Retaining
• Increase assembly reliability 30% metal-to-metal contact. Compounds fill air voids,
• Produce more accurate, rigid assemblies resulting in unitized, more
• Eliminate backlash in keys and splines
• Prevent small diameter shaft distortion reliable assembly.
• Increase strength of heavy press fits
• Eliminate fretting corrosion * Bonded Interference takes advantage of wider tolerances and relaxed
• Seal against environmental corrosion surface roughness.
• Eliminate high assembly stresses
• Reduce variations in load transmission
• Allow dissimilar materials to be assembled more easily

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Retaining Compounds

125 Your Application IS THE ASSEMBLY BADLY WORN?

• Increase the shear strengthRetaining No – Gaps to 0.010 in. (0.25 mm)
of cylindrical, non-threaded
assemblies What Strength is Required?

• An industry standard for High
assembling press- and slip-
fitted parts What Service Temperature is Required?

• Fill the “inner space” between Up to 355°F (180°C) Up to 450°F (230°C)
components and cure to form
a strong precision assembly

• Formulated in a variety of
viscosities, gap fills, flexibility
and strength characteristics

• Can be applied with automated
process equipment or
dispensed manually

Gap 0.006 in. Gap 0.010 in.
(0.15 mm) (0.25 mm)

Solution 648™ Retaining 638™ Retaining 620™ Retaining
Compound Compound Compound

Strength Required High High High
Shear Strength 3,900 psi 4,500 psi 3,800 psi
Up to 0.006 in. Up to 0.010 in. Up to 0.008 in.
Clearance (0.15 mm) (0.25 mm) (0.20 mm)
355°F (180°C) 355°F (180°C) 450°F (230°C)
Temperature Resistance 3 min. / 24 hrs. 4 min. / 24 hrs. 60 min. / 24 hrs.
Cure Time (Setup/Full Strength) Not Required Not Required 7088™, 7649™, 7471™

Recommended Activator

Product Description LOCTITE® 648™ LOCTITE® 638™ LOCTITE® 620™
Retaining Compound Retaining Compound Retaining Compound
U.S.: 1-800-LOCTITE (562-8483)
General Purpose/High Strength/ Slip Fit/High Strength Slip Fit/High Temperature
Rapid Cure
Recommended for slip fit parts with Recommended for high temperature
Best performance for clearance larger gaps. Excellent performance retaining of parts with a clearance
or interference fit parts. Excellent for dynamic, axial and radial loads. or interference fit, i.e., retaining
performance for dynamic, axial Bonds through contaminants bushings, bearings, seals, fans and
and radial loads. Bonds through including oils, cutting and corrosion liners. Requires heat cure to achieve
contaminants including oils, protection fluids. Cures on metals temperature resistance.
cutting and corrosion protection without an activator. Globally ABS Approved.
fluids. Cures on metals without an available product.
activator. Globally available product. NSF P1-Certified P/N Package Size
NSF/ANSI 61-Certified
P/N Package Size 62005 0.5 ml bottle
P/N Package Size 62015 10 ml bottle
1835937 10 ml bottle 62040 50 ml bottle
1844659 0.5 ml capsule 1835936 50 ml bottle 62070 250 ml bottle
1835922 10 ml bottle 1835925 250 ml bottle 62085 1 liter bottle
1835920 50 ml bottle 1835924 1 liter bottle
1835918 250 ml bottle
1835917 1 liter bottle

Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

GET THE MOST FROM LOCTITE® 126
RETAINING COMPOUNDS

From single repairs to daily production INACTIVE METALS
line use, these guidelines will help (PRIMERS RECOMMENDED)
you maximize the benefits of using
Yes – Gaps up to 0.020 in. LOCTITE® Retaining Compounds: PLATED PARTS SILVER Retaining Compounds
(0.5 mm) with Activator
Surface Cleanliness: Optimal ANODIZED GOLD
Medium performance is achieved when parts ALUMINUM
are clean and free of grease, oil, rust (ALODINE®, ZINC
preventative or other contaminants. IRIDITE™) PURE ALUMINUM†
LOCTITE® ODC Free Cleaner &
Degreaser is one of the recommended TITANIUM CADMIUM
cleaners that will effectively remove
contaminants without leaving a residue. STAINLESS STEEL MAGNESIUM
LOCTITE® Retaining Compounds 638™,
648™ and 680™ are oil tolerant. They GALVANIZED STEEL NATURAL OR
are robust enough to bond through CHEMICAL
contaminants including oils, and cutting MAGNETITE STEEL BLACK OXIDE
and corrosion protecting fluids.
INCONEL™
Cure Process: LOCTITE® Retaining
Compounds have an anaerobic cure NICKEL
system. Anaerobic means it cures in
the absence of air and in the presence ACTIVE METALS (PRIMERS OPTIONAL)
of metal ions. This is why the resin
remains liquid until it is confined IRON BRONZE
between metal parts. Cure speed is PLAIN STEEL MANGANESE
usually faster on active metals than COPPER MONEL™
inactive metals because active have BRASS KOVAR™
more metal ions.
641™ Retaining 660™ Retaining Application Process: Use an
Compound Compound Activators accelerate cure time. application method that ensures the
Activators are often used to assemble bond-line is filled. Excess material
Medium High inactive metal parts, cold parts or for should be avoided because it could
1,700 psi 3,335 psi large gaps. Loctite® 648™, 638™ and migrate. Several proven methods to
Up to 0.006 in. Up to 0.020 in. 680™ are primerless, meaning they control the amount applied, ranging
(0.15 mm) (0.50 mm) cure rapidly without activators for from manual to automated:
300°F (150°C) 300°F (150°C) most applications.
20 min. / 24 hrs. 20 min. / 24 hrs. • Roll bearing on a synthetic sponge
7088™, 7649™, 7471™ 7088™, 7649™, 7471™ saturated with LOCTITE® Retaining
Compound to apply a consistent
thin film.

• Manually apply LOCTITE® Retaining
Compound with a LOCTITE® Hand
Pump. Each squeeze of the trigger
dispenses a metered amount
of adhesive to the parts prior
to assembly.

LOCTITE® 641™ LOCTITE® 660™ • Use the LOCTITE® Semiautomatic
Retaining Compound Retaining Compound applicator to dispense a metered
amount of adhesive to a predefined
A controlled-strength retaining Used for repairing worn coaxial parts dispoint point.
compound that is ideal for cylindrical without remachining; enables reuse
parts that require disassembly. of worn bearing seats, keys, splines, • Use the LOCTITE® RotoSpray™
CFIA Approved. tapers, or for retaining shims. applicator to automatically dispense
CFIA Approved. a precise band of adhesive to the
P/N Package Size bore of a circular component.

28802 10 ml tube P/N Package Size
21458 50 ml tube
66010 6 ml tube
66040 50 ml tube

The LOCTITE® RotoSpray™ applicator
automatically dispenses a perfect bead
of retaining compound within the bore
of circular components.

† Pure aluminum is an inactive metal. Alloys of aluminum containing copper are considered active metals.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Retaining
Compounds

LOCTITE® Retaining Compound Properties Chart

LOCTITE® ITEM NUMBER PACKAGE TYPICAL USE COLOR MAXIMUM VISCOSITY SHEAR TEMPERATURE CURE RECOMMENDED AGENCY
PRODUCT TYPE & SIZE Green GAP FILL (cP) STRENGTH RANGE SPEED* PRIMER APPROVALS
For close-fitting (DIAMETER- STEEL/STEEL*
127 603™ 21440 10 ml bottle parts with light INCHES) 125 -65°F to 300°F Fixture – 7088™, N/A
21441 50 ml bottle contamination (psi) (-54ºC to 149ºC) 10 min. 7649™ or
21442 250 ml bottle 0.005 in. Full – 7471™
3,770 24 hrs.

Retaining 609™ 60905 0.5 ml capsule Augments Green 0.006 in. 125 2,300 -65°F to 300°F Fixture – 7088™, MIL-R-46082B
60921 10 ml bottle press fit parts (0.15 mm) (minimum) (-54ºC to 150ºC) 10 min. 7649™ or for existing
CLOSE-FITTING PARTS 60931 50 ml bottle Full – 7471™ designs, ASTM
60941 250 ml bottle 24 hrs. D-5363**, CFIA
60943 1 liter bottle

648™ 1844659 0.5 ml capsule High strength, Green 0.006 in. 500 3,900 -65°F to 355°F Fixture – Not NSF/ANSI 61,
1835922 10 ml bottle primerless, oil (0.15 mm) (-54ºC to 180ºC) 3 min. required CFIA
1835920 50 ml bottle tolerant, general Full –
1835918 250 ml bottle purpose 24 hrs.
1835917 1 liter bottle

LOOSE-FITTING PARTS 638™ 1835937 10 ml bottle High strength, Green 0.010 in. 2,500 4,500 -65°F to 355°F Fixture – Not NSF P1,
680™ 1835936 50 ml bottle primerless, oil (0.25 mm) 4,000 (-54ºC to 180ºC) 4 min. required CFIA
1835925 250 ml bottle tolerant, for Full –
1835924 1 liter bottle slip-fitted parts 24 hrs. NSF/ANSI 61,
ABS, CFIA
1835212 0.5 ml capsule High strength, Green 0.015 in. 1,250 -65°F to 355°F Fixture – Not
1835205 10 ml bottle primerless, oil 0.38 mm (-54ºC to 180ºC) 4 min. required
1835201 50 ml bottle tolerant, for Full –
1835196 250 ml bottle slip-fitted parts 24 hrs.
1835206 1 liter bottle

MACHINERY MEDIUM HIGH 620™ 62005 0.5 ml capsule For high Green 0.008 in. 8,500 3,800 -65°F to 450°F Fixture – 7088™, CFIA, ABS
REPAIR STRENGTH TEMPERATURE 62015 10 ml bottle temperature 0.2 mm (-54ºC to 230ºC) 1 hr. 7649™ or
62040 50 ml bottle applications Full – 7471™
62070 250 ml bottle 24 hrs.
62085 1 liter bottle

641™ 28802 10 ml bottle Medium strength Yellow 0.008 in. 525/1,950 1,700 -65°F to 300°F Fixture – 7088™, CFIA
660™ 21458 50 ml bottle for easier 0.2 mm Thixotropic (-54ºC to 150ºC) 20 min. 7649™ or
232™ disassembly Full – 7471™ CFIA
640™ 66010 24 hrs.
661™ 66040 N/A
6 ml tube For repair of Silver 0.020 in. 250,000/ 3,335 -65°F to 300°F Fixture – 7088™, Mil-R-46082B,
18607 50 ml tube 0.5 mm 1,500,000 (-54ºC to 150ºC) 20 min. 7649™ or ASTM D-5363
27863 worn machinery Thixotropic Full – 7471™ N/A
24 hrs.
135520 parts
135521
209764 1 liter bottle Slow cure for Brown 0.015 in. 5,000 1,350* -65°F to 300°F Fixture – 7088™,
250 ml bottle heavy press fit 0.38 mm (2 hrs. heat (-54ºC to 150ºC) 1 hr. 7649™ or
234921 cure) Full – 7471™
234925 24 hrs.
3,200
SLOW OR UV CURE 50 ml bottle Slow cure for Green 0.004 in. 600 -65°F to 350°F Fixture – 7649™ or
250 ml bottle long assembly 0.1 mm (-54ºC to 175ºC) 1 hr. 7471™
1 liter bottle time Full –
24 hrs.

250 ml bottle UV light cures Yellow 0.006 in. 500 2,175 -65°F to 350°F Fixture – 7649™ or
1 liter bottle exposed 0.15 mm (-54ºC to 175ºC) 4 min. 7471™
adhesive Full –
24 hrs.

ITEMS IN RED = Source’s PICK or NEW * Varies with substrates.
= Indicates Worldwide Availability ** For new designs.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Activators Chart

LOCTITE® ITEM PACKAGE TYPE & SIZE COLOR VISCOSITY BASE ON-PART DRY TIME APPLICATION AGENCY APPROVALS
PRODUCT 1069258 17 g stick Teal (cP) LIFE Anaerobics CFIA Listed

7088™ PRIMER Semisolid No solvent 30 days None 128

7090™ PRIMER 19368 1 fl. oz. bottle Dark Blue 17.5 No solvent 1 hour None Anaerobics N/A
12695 1 liter bottle Amber 2
ACTIVATORS 7471™ Acetone/ 7 days 30 to 70 Anaerobics MIL-S-22473E for Retaining Compounds
PRIMER T™ 19267 1.75 fl. oz. bottle seconds Anaerobics existing designs,
22477 4.5 oz. net wt. aerosol can Isopropanol ASTM D-5363
19268 1 gallon can for new designs,
CFIA Listed
7649™ 19269 1.75 fl. oz. glass bottle Clear/ 2 Acetone 30 days 30 to 70
PRIMER N™ 21347 25 g net wt. aerosol can Green seconds MIL-S-22473E for
21348 4.5 oz. net wt. aerosol can existing designs,
19266 1 gallon can ASTM D-5363 for
new designs,
NSF/ANSI 61,
NSF P1, CFIA Listed

= Indicates Worldwide Availability

LOCTITE® Cleaner & Degreaser Chart

LOCTITE® ITEM PACKAGE TYPE & SIZE DRYING TIME RESIDUE/TINSABILITY ODOR AGENCY
PRODUCT No rinse and no residue Mild Citrus APPROVALS
22355 15 oz. net wt. aerosol Equivalent to the evaporation
ODC-FREE CLEANER 20162 16 fl. oz. pump spray rate of water. Wiping or blowers NSF K1
& DEGREASER will accelerate dry time.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

www.equipment.loctite.com

Retaining Compound
Equipment

YOUR EQUIPMENT Source

For more details, see the LOCTITE® Equipment
Sourcebook, LT-3669, or visit us on the web for additional

129 information, diagrams, products and our full line of

equipment at www.equipment.loctite.com.

Retaining Compound Equipment LOCTITE® PRODUCT ITEM PRESSURE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
NUMBER REGULATION RANGE
SEMI/FULLY AUTOMATIC PRECISION BORE COATING APPLICATOR SENSING ACCESSORIES

LOCTITE® 97152 1 to 100 psi Gel Adhesives, Depends on Reservoir Medium Yes Dispense Tips and
DUAL CHANNEL Instant Adhesives, to High Accessories –
AUTOMATIC Viscosity Light Cure/Acrylics, Retaining Pages 176-177
CONTROLLER 0 to 3,000 cP Compounds, Threadlockers

ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER PATTERN Anaerobic Adhesives ADJUSTMENT No ACCESSORIES

LOCTITE® 983330 Positive Low to Drop Yes Dispense Tips and
POSITIVE Accessories –
DISPLACEMENT Displacement Medium Pages 176-177
PUMP

LOCTITE® 97115 Electric Low to Bead Anaerobic Adhesives N/A N/A Dispense Tips and
ROTOSPRAY™ Medium Accessories –
APPLICATOR Pages 176-177

DUAL CHANNEL DISPENSING ITEM PRESSURE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
NUMBER REGULATION RANGE SENSING ACCESSORIES
INTEGRATED Gel Adhesives, 250 ml bottle
SEMI-AUTOMATIC 1390322 0 to 15 psi Instant Adhesives, 1 lb. bottle Low to Yes Dispense Tips and
DISPENSER Light Cure/Acrylics, Retaining 1 liter bottle Medium Accessories –
Viscosity Compounds, Threadlockers 2 kg bottle Pages 176-177
>3,000 cP 200 g squeeze tube

1390321 0 to 100 psi Medium Yes
to High

Viscosity
0 to 3,000 cP

ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT No ACCESSORIES
High Instant Adhesives,
LOCTITE® 98013 Performance Low to Drop, Dot, Retaining Compounds, Yes Dispense Tips and
CYANOACRYLATE Diaphragm Medium Bead Threadlockers Accessories –
DISPENSE VALVE Pages 176-177

LOCTITE® PRODUCT ITEM NUMBER PRESSURE USED TO DISPENSE PACKAGE TYPES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
REGULATION & SIZES
RESERVOIRS RANGE SENSING ACCESSORIES
BOND-A-MATIC®
3000 RESERVOIR 982720 0 to 15 psi Gel Adhesives, 250 ml bottle Low to Yes Dispense Tips and
982726 0 to 100 psi Instant Adhesives, 1 lb. bottle Medium No Accessories –
BOTTLE DISPENSING 982723 Light Cure/Acrylics, 1 liter bottle Yes Pages 176-177
982727 Retaining Compounds, 2 kg bottle Medium No
50 ML AND 250 ML Threadlockers 200 g squeeze tube to High
HAND PUMPS
HANDHELD

ITEM NUMBER USED TO DIPENSE PACKAGE TYPES & SIZES VISCOSITY RANGE TYPE CONSUMABLES – DISPENSE
Low to Medium Manual ACCESSORIES
98414 Retaining 50 ml bottle
97001 Compounds, 250 ml bottle Dispense Tips and
Threadlockers Accessories –
Pages 176-177

ITEMS IN RED = Source’s PICK or NEW Your Source for Motion Control Robot Dispense Systems. See page 171.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

www.equipment.loctite.com

LOCTITE® PRODUCT ITEM PRESSURE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
NUMBER REGULATION RANGE SENSING ACCESSORIES
SPRAY VALVE
CONTROLLER 1406023 0 to 100 psi Primers, Accelerators, Activators 250 ml bottle Low No Use with LOCTITE®
1 lb. bottle Spray Valve 98520
EQUIPMENT FOR PRIMERS SPRAY VALVE 1 liter bottle
2 kg bottle
200 g squeeze tube

ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER Spray Valve PATTERNS ADJUSTMENT No ACCESSORIES
Primers,
98520 Low Spray Accelerators, Yes 989268 –
Activators 0.014 in. Nozzle Kit
989269 –
0.028 in. Nozzle Kit

130

LOCTITE® PRODUCT ITEM DISPENSE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY VACUUM CONSUMABLES – DISPENSE
NUMBER PATTERNS RANGE SUCK-BACK ACCESSORIES
VOLUMETRIC BOTTLE DISPENSING Programmable
DISPENSE SYSTEMS 98548 Dot, Drop, Instant Adhesives, Any Bottle 0 to Dispense Tips & Retaining Compound Equipment
BENCHTOP PERISTALTIC Bead Light Cure/Acrylics, 5,000 cP N/A Accessories –
DISPENSER Pages 176-177
Retaining Compounds,
Threadlockers Dispense Tips &
Accessories –
COMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEM Pages 176-177

BOND-A-MATIC® 3000 982719 Dot, Drop, Gel Adhesives, Instant 250 ml bottle Low
DISPENSER 0-15 psi Bead Adhesives, Light Cure/ 1 lb. bottle
1 liter bottle Medium
BOND-A-MATIC® 3000 982722 Acrylics, Retaining 2 kg bottle to High
DISPENSER 0-100 psi Compounds, Threadlockers 200 g squeeze tube

LOCTITE® PRODUCT ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE ACTUATION CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT ACCESSORIES
GENERAL-PURPOSE APPLICATORS
97130 Pneumatic Low Drop, Dot, Instant Adhesives, Retaining Yes Foot Dispense Tips &
LV HAND-HELD
APPLICATOR Bead Compounds, Threadlockers Accessories –

Pages 176-177

HANDHELD VALVES GENERAL-PURPOSE APPLICATORS 97111 Manual Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes Finger Dispense Tips &
Bead Compounds, Threadlockers Accessories –
MANUAL HAND- Pages 176-177
HELD APPLICATOR

PNEUMATIC HAND- 97112 Pneumatic Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes Foot
HELD APPLICATOR Bead Compounds, Threadlockers

PNEUMATIC HAND- 97116 Pneumatic Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes Finger
HELD APPLICATOR Bead Compounds, Threadlockers

GENERAL-PURPOSE APPLICATORS 97131 Pinch Tube Low to Medium Drop, Dot, Instant Adhesives, Retaining Yes Finger Dispense Tips &
97132 Bead Compounds, Threadlockers Accessories –
VARI-DROP™ Pages 176-177
APPLICATORS

LOCTITE® PRODUCT ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT ACCESSORIES
High
HIGH PERFORMANCE DIAPHRAGM VALVES Performance
Diaphragm
LIGHT CURE 98009 Low to Medium Drop, Dot, Instant Adhesives, Retaining Yes No Dispense Tips and

DISPENSE VALVE Bead Compounds, Threadlockers Accessories –

Pages 176-177

VALVES & PUMPS GENERAL DUTY DIAPHRAGM VALVES 97135 General Duty 0 to 2,500 cP Drop, Dot, Light Cure/Acrylics, No No Dispense Tips and
97136 Diaphragm Accessories –
DIAPHRAGM Bead Instant Adhesives, Retaining Pages 176-177
VALVE
Compounds, Threadlockers Yes Dispense Tips and
2,500 to 5,000 cP Accessories –
Pages 176-177
HIGH VISCOSITY FLUID AND PASTE VALVES High Viscosity Medium to High Drop, Anaerobic Gasketing, Yes
POPPET VALVE 986300 Retaining Compounds,
Threadlockers
Fluid and Paste Bead

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Surface Cleaning131 Surface Cleaning

131 SURFACE PREPARATION

132 Cleaners & Degreasers

WHY USE LOCTITE® SURFACE KEY BENEFITS OF USING LOCTITE®
PREPARATION PRODUCTS? SURFACE PREPARATION PRODUCTS:

LOCTITE® Surface Preparation products are available in both • Clean and degrease work surfaces, parts and hands
aqueous and solvent formulations. They are engineered to ensure
superior cleaning and maximize performance of LOCTITE® adhesives • Increase cure speed
and sealants.
• Increase gap fill
WHAT CONSIDERATIONS ARE IMPORTANT WHEN
CHOOSING A SURFACE PREPARATION PRODUCT? • Ensure full cure on inactive surfaces

• Cleaners and Degreasers: The major factors to consider are • Available in ozone safe (non-chlorofluorocarbons), solvent-
dry time, residue, odor and substrate compatibility. based and solventless formulations

• Accelerators: Used to increase cure speed and gap filling
capabilities of cyanoacrylate adhesives.

• Activators: Specifically engineered curing agents for
structural adhesives.

• LOCTITE® Primers: Used to ensure cure on inactive surfaces
and speed the cure of machinery adhesives.

Henkel Adhesive and Sealant Product Specialists are available to assist you
with new product designs, or to help you re-engineer an existing application
for improved performance and cost savings. They can also set up testing
of your parts at the Henkel Customer Engineering Center. For application
assistance, call 1-800-LOCTITE (562-8483); within Canada, call 1-800-263-5043;
or, contact us through the web at www.henkelna.com/loctite.

STRAIGHT FROM The Source

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

Cleaners &
Degreasers

Your SurfaceCLEANERS Cleaning 132
Application
Hand Cleaner Large Surfaces Parts Degreaser Cleaners & Degreasers
• Cleaners and
degreasers Do you require a biodegradable product?
include both
aqueous and No Yes
solvent-based
products Industrial Natural Blue® ODC-Free Cleaner & Pro Strength
Hand Wipes Biodegradable Degreaser Parts Cleaner
• All are free of Cleaner & Degreaser
Class I ozone-
depleting N/A N/A 34 132
chemicals
(ODCs) LOCTITE® Industrial LOCTITE® Natural Blue® LOCTITE® ODC-Free Cleaner LOCTITE® Pro Strength
Hand Wipes Biodegradable Cleaner & Degreaser Parts Cleaner
Solution & Degreaser
Premoistened with a powerful A non-aqueous, hydrocarbon- Aggressively penetrates,
KB Values* citrus-scented cleaning based solvent designed for dissolves and removes oil
formula that is abrasive cleaning and degreasing and grease from parts. Dries
Product enough to scrub off the surfaces to be bonded with quickly with no residue.
Description toughest grease and grime. adhesives, as well as for Contains no ozone-depleting
Quick and easy-to-use, general-purpose industrial chemicals (ODCs).
these 9.5 in. x 12 in. towels Biodegradable, all-purpose, cleaning. Safe on aluminum, CFIA Listed.
eliminate rinsing and drying industrial strength, rubber and most plastics,
and leave no residue behind. concentrated cleaner and will not cause flash P/N Package Size
Perfect for industrial and and degreaser. Can be rusting on water-sensitive 30548 19 oz. net wt. aerosol
commercial environments economically diluted with parts. Dries residue-free.
in the painting, printing, water. Formulated for wipe Contains no ozone-depleting
maintenance, transportation down, pressure spraying and chemicals (ODCs). (Formerly
and construction industries. immersion cleaning processes referenced as 7070™.) NSF
at room temperature or K1 Approved.
P/N Package Size heated. Nonflammable and
nontoxic. Contains no ODCs.
34943 75 count canister Available in pine scent or
34944 130 count bucket unscented formulas.
CFIA Listed.

P/N Package Size P/N Package Size

82249 24 fl. oz. spray bottle 22355 15 oz. net wt. aerosol
82251 1 gallon bottle 20162 16 fl. oz. pump spray
82253 5 gallon pail
82255 55 gallon drum

* Kauri-Butanol Value tested to ASTM D 1133. (This test method covers the determination of the relative solvent power of hydrocarbon solvents.)

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Cleaners &
Degreasers

LOCTITE® Cleaner & Degreaser Properties Chart

LOCTITE® PRODUCT ITEM PACKAGE TYPE & SIZE DRYING TIME RESIDUE/ ODOR AGENCY
NUMBER RINSABILITY Pine Scent APPROVALS

133 NATURAL BLUE® BIODEGRADABLE CLEANER 82249 24 fl. oz. spray bottle Equivalent to the evaporation Rinses residue-free CFIA Listed
& DEGREASER 82251 1 gallon bottle rate of water. Wiping or blowers with water

82253 5 gallon pail will accelerate dry time.

82255 55 gallon drum

DEGREASERS NATURAL BLUE® BIODEGRADABLE CLEANER 23811 1 gallon bottle Equivalent to the evaporation Rinses residue-free Fragrance- CFIA Listed
& DEGREASER (FRAGRANCE-FREE) rate of water. Wiping or blowers with water Free
Surface Cleaning will accelerate dry time.

ODC-FREE CLEANER & DEGREASER 22355 15 oz. net wt. aerosol Equivalent to the evaporation No rinse and no residue Mild Citrus NSF K1
PRO STRENGTH DEGREASER 20162 16 fl. oz. pump spray rate of water. Wiping or blowers Rinses clean Mild Solvent CFIA Listed
will accelerate dry time.
1578099 15 oz. net wt. aerosol
Leave on surface for 10 minutes.

CHISEL® PAINT STRIPPER 79040 18 oz. net wt. aerosol Leave on surface for 5 to 10 Waxy residue Solvent N/A
(METHYLENE CHLORIDE) minutes. Wipe/scrape clean.
PAINT STRIPPER
CHISEL® MC-FREE PAINT STRIPPER 1317781 15.25 oz. net wt. aerosol Leave on surface for 5 to 10 Oily residue Solvent CFIA Listed
minutes. Wipe/scrape clean.
INDUSTRIAL HAND WIPES
GLASS CLEANER / 34943 75 count canister 1 to 5 minutes No rinse and no residue Mild Citrus N/A
HAND WIPES 34944 130 count bucket

NON-CHLORINATED PARTS CLEANER 30545 14.75 oz. net wt. aerosol 5 to 15 minutes No rinse and no residue Mild Solvent CFIA Listed
PRO STRENGTH PARTS CLEANER No rinse and no residue Mild Solvent CFIA Listed
PARTS 768™ X-NMS CLEANUP SOLVENT 30548 19 oz. net wt. aerosol 1 to 5 minutes
CLEANERS PRO STRENGTH VARNISH REMOVER

76820 1.75 fl. oz. bottle <30 seconds No rinse and no residue Solvent N/A
76871 1 gallon can

STRIPPER / VARNISH 30529 12 oz. net wt. aerosol 5 minutes No rinse and no residue Aromatic CFIA Listed
REMOVERS

ITEMS IN RED = Source’s PICK or NEW

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Cleaner & Degreaser Applications Chart

LOCTITE® PRODUCT FUNCTION APPLICATION

NATURAL BLUE® BIODEGRADABLE Removes grease, grime, oil, soot, cutting fluids, Cleans engine parts, ovens, exhaust hoods, drilling rigs.
CLEANER & DEGREASER mildew, stains, light carbon, animal fat, polishing compounds and ink. Can be diluted for general wipe-down cleaning.
Formulated for pressure spraying and immersion cleaning
NATURAL BLUE® BIODEGRADABLE processes, at room temperature or heated.
CLEANER & DEGREASER
DEGREASERS (FRAGRANCE-FREE) Removes grease, grime, oil, soot, cutting fluids, Exhaust hoods, machinery, tanks, motors, concrete floors,
mildew, stains, light carbon, animal fat, polishing asphalt, walls, floors, carpets, valves, equipment, vehicles,
compounds and ink, without added fragrance. compressors, exterior siding, engines, bearings.

ODC-FREE CLEANER & DEGREASER Removes grease, oil, lubrication fluids, metal Use as a spray or in immersion cleaning processes, at room 134
cuttings and filings from parts, equipment temperature or heated. Recommended as a final preassembly
and machinery. cleaning treatment for all surfaces bonded with adhesives.

PRO STRENGTH DEGREASER Self-emulsifying degreaser that quickly cuts and Cleaning and degreasing industrial and farm equipment,
removes grease, oil and dirt, as well as inhibits lawn mowers, garage floors, tools.
rust and corrosion. Cleaners & Degreasers

PAINT CHISEL® PAINT STRIPPER Removes precut conventional gasket cements as Removes silicones, baked-on gaskets, gaskets from
STRIPPER (METHYLENE CHLORIDE) well as formed-in-place chemical gaskets. aluminum, small difficult-to-reach components, weather-
CHISEL® MC-FREE PAINT STRIPPER stripping adhesive, dried oil, grease, paint, varnish.
GLASS CLEANER/ Removes precut conventional gasket cements as
HAND WIPES INDUSTRIAL HAND WIPES well as formed-in-place chemical gaskets. Removes silicones, baked-on gaskets, gaskets from
aluminum, small difficult-to-reach components, weather-
Removes grease, grime, oil, soot, paints and ink. stripping adhesive, dried oil, grease, paint, varnish.

Removes grease, grime, oil, soot, paints and ink from
surfaces. Removes grease and grime from hands.

PARTS NON-CHLORINATED PARTS CLEANER Cleaner for removing oil, grease and asphalt with All-purpose metal parts cleaner. Ideal for aluminum surfaces.
CLEANERS PRO STRENGTH PARTS CLEANER no chlorinated solvent runoff.
768™ X-NMS CLEANUP SOLVENT All-purpose metal parts cleaner.
Removes oil, grease, brake fluids, oxidized oils
(gum) and asphalt. Penetrates through dirt and Disassembly of parts and cleanup of dispensing equipment.
corrosion and flushes them away.
Carburetors, chokes, linkages, heat risers, PCV valves,
Dissolves cured cyanoacrylate-based adhesives. metal parts, industrial equipment.

PRO STRENGTH VARNISH REMOVER Dissolves and cleans residue deposited during normal
operation of gasoline engine powered equipment.
STRIPPER/ VARNISH
REMOVERS

ITEMS IN RED = Source’s PICK or NEW

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

135 Threadlocking

Threadlocking 135 THREADLOCKING LOCTITE® Threadlockers are single-component liquid and semisolid
adhesives. They cure at room temperature to a hard solid thermoset
137 Threadlockers plastic when applied between steel, aluminum, brass and most other
metal surfaces. They cure in the absence of air. The adhesive completely
141 Threadlocker Equipment fills the gaps between mating threads to lock threads and joints.

WHY USE A LOCTITE® THREADLOCKER? ADVANTAGES OF LOCTITE® THREADLOCKERS
AS COMPARED TO TRADITIONAL
LOCTITE® threadlockers are vastly superior to mechanical locking MECHANICAL LOCKING DEVICES:
devices for the assembly of threaded fasteners. The anaerobic liquid
is applied drop-wise to the threads of a fastener and cures to a hard • Prevent unwanted movement, loosening, leaks, and corrosion
thermoset plastic that locks the threads together. This prevents • Resist vibration
unwanted movement, loosening, leaks and/or corrosion. To further • Single-component – clean and easy to apply
enhance their performance, anaerobic formulations have been • Can be used on all sizes of fasteners – reduces inventory costs
developed for applications with high temperatures, oil contamination • Seal threads – allow through-hole tapping
and less active surfaces.
Henkel Adhesive and Sealant Product Specialists are
LOCTITE® threadlockers have historically been formulated as liquids available to assist you with new product designs,
due to their reactivity; in liquid form they remain stable and ready or to help you re-engineer an existing application
for use. Recent breakthroughs have led to the development of stable, for improved performance and cost savings. They
semisolid stick formulations. This has opened the door to applications can also set up testing of your parts at the Henkel
where the liquids were considered too messy or inconvenient. The Customer Engineering Center. For application
new semisolid formulations allow direct contact of the anaerobic assistance, call 1-800-LOCTITE (562-8483); within
product to the part – the product is placed exactly where it is needed, Canada, call 1-800-263-5043; or, contact us through
and it stays in place as the threaded part is positioned and assembled. the web at www.henkelna.com/loctite.

LOCTITE® THREADLOCKERS ARE MUCH SUPERIOR STRAIGHT FROM The Source
TO TRADITIONAL MECHANICAL LOCKING METHODS:

• Mechanical devices such as split pins, tab washers: These are
only used to prevent the loss of nuts and bolts.

• Friction devices: They add to absolute elasticity and/or increase
friction but will not ensure permanent threadlocking under
dynamic loads.

• Locking devices, like tooth flanged and ribbed flanged bolts,
nuts and washers: They prevent self-loosening but are expensive
and need larger flange-bearing surfaces. They may damage
the surfaces.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

Threadlocking 136

IS THERE A THREADLOCKER FOR HIGH DO YOU HAVE A PRODUCT FOR INACTIVE METALS? Threadlocking
TEMPERATURE APPLICATIONS?
LOCTITE® 243™ and 263™ threadlockers enable the assembly of
Yes, Henkel has threadlockers for applications below 300°F inactive metals without the need to use a primer. These products
(150°C) and between 300°F (150°C) to 650°F (343°C). One are ideal for use on metals such as stainless steel, zinc, magnesium,
example is LOCTITE® 2422™, a medium strength product for black oxide, cadmium, anodized aluminum, passivated titanium and
temperatures up to 650°F (343°C). Other high temperature others.
products can be found in the Properties Chart.
HOW MUCH TIME IS NEEDED FOR FULL CURE?
ARE THERE PRODUCTS THAT WORK
WELL ON OILY PARTS? Most anaerobic adhesives attain full cure in around 24 hours but will
fixture in less time. For cure speed of the various products, refer to
There are several LOCTITE® products with oil-cutting the Properties Chart or to the Technical Data Sheets (TDS).
capabilities. These include LOCTITE® 243™, 248™, 263™, 268™ and
294™ threadlockers. Use the Properties Chart to choose the one CAN I USE THREADLOCKERS ON PLASTIC THREADS?
that is right for your application.
For plastic fasteners, only use LOCTITE® 425™ Assure™ Instant
WHAT DO I DO WHEN I HAVE A Adhesive, a surface curing threadlocker.
BLIND HOLE APPLICATION?
WHEN SHOULD I USE A PRIMER?
The application method for blind hole assemblies requires that
the product be applied to both parts. If the product is applied to Primers help speed the curing process for faster return to service.
the fastener only, air pressure will force the liquid threadlocker For this reason, they can be used in any application but are most
to escape as you torque down. often used on less active metal surfaces. If the threadlocker will be
applied below 40°F, pretreat parts with LOCTITE® 7649™ Primer N™.
Alternatively, the use of LOCTITE® 243™ and 263™ primerless products
provides a fast cure on inactive surfaces.

The Source ANSWERS YOUR QUESTIONS

CHOOSING THE RIGHT THREADLOCKER FOR YOUR APPLICATION

How do I decide which threadlocker to use?

LOCTITE® threadlockers are available in many grades to satisfy a wide range of applications. To make
grade selection easy, the grades are color-coded to help you identify one threadlocker from the other.

LOW STRENGTH – Purple color, removable HIGH STRENGTH – Red color, for
with hand tools, good for adjustment screws, permanent assemblies, heavy equipment,
calibration screws, meters and gauges, suspension bolts, motor and pump
and for fasteners up to ¼ in. in diameter. mounts, bearing cap bolts and studs.

MEDIUM STRENGTH – Blue color, removable WICKING – Green color, removable with
with hand tools, good for machine tools heat and hand tools, for preassembled
and presses, pumps and compressors, fasteners, instrumentation screws,
mounting bolts, gearboxes, and for electrical connectors, carburetors
fasteners over ¼ in. in diameter. Available and fasteners.
in liquid, tape and stick formats.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Threadlockers

137 Your Application ARE THE PARTS ALREADY ASSEMBLED?

Threadlocking • Prevent loosening from shock and No
vibration
Low – Purple What strength do you require?
• Single component – clean and easy
to apply Medium – Blue
(Disassemble with hand tools)
• Can be used on various sizes of
fasteners – reduces inventory costs

• Seal threads

• Stop rust and corrosion

• Available in a variety of viscosities
and strengths for virtually any
application

Solution 222MS™ 243™ 248™ QuickTape® 249™

Chemistry Liquid Anaerobic Liquid Anaerobic Semisolid Tape Anaerobic
Anaerobic
Color Purple Blue Blue
1,200/5,000 1,300/3,000 Blue
Viscosity (cP) Thixotropic Thixotropic Tape
Semisolid
Torque (in.-lbs.) (Break/Prevail) 53/30 230/40 74/47
Fixture Time 10 min. 5 min. 222/36 30 min.
24 hrs. 24 hrs. 5 min. 24 hrs.
Cure Time (Hours) -65°F to 300°F -65°F to 360°F 24 hrs. -65°F to 300°F
Temperature Resistance 7088™, 7649™, -65°F to 300°F 7088™, 7649™,
7471™ Not Required 7088™, 7649™, 7471™
Recommended Primer 7471™

Product Description LOCTITE® 222MS™ LOCTITE® 243™ Blue LOCTITE® 248™ Blue LOCTITE® QuickTape®
Threadlocker Threadlocker Threadlocker 249™ Blue Threadlocker
U.S.: 1-800-LOCTITE (562-8483) Tape
Low Strength/ Medium Strength/ Semisolid/Medium
Small Screw Primerless Strength/Primerless Tape/Medium Strength

Recommended for low Versatile, medium strength Semisolid stick form is The one and only
strength threadlocking liquid threadlocker. convenient, portable and threadlocker in a tape
of adjustment screws, Reliably locks and seals great for hard-to-reach form. This revolutionary
countersunk head screws, metal fasteners up to applications. Engineered product offers the same
and set screws; on collars, 3/4 in. Engineered to cure to cure consistently reliability and performance
pulleys, tool holders and consistently on a variety of on a variety of metals as LOCTITE® removable
controllers. Also for low metals including stainless including stainless steel grade threadlocking
strength metals such as steel and most plated and most plated fasteners. liquids. Convenient, durable
aluminum or brass. fasteners. Tolerates minor Tolerates minor surface package is a must for every
Mil-Spec (S-46163A) surface contaminants, anti- contaminants, anti- toolbox. It is easy to apply
Type II, Grade M. corrosion and protection corrosion and protection and can be preapplied for
NSF P1 Certified. fluids. Rated for 360°F fluids. Removable with future assembly.
(180°C). Removable with hand tools. CFIA Listed.
P/N Package Size hand tools.
P/N Package Size P/N Package Size
22205 0.5 ml capsule P/N Package Size
22221 10 ml bottle 37684 9 g stick 1372603 260 in. roll
22231 50 ml bottle 1330255 0.5 ml capsule 37087 19 g stick
22241 250 ml bottle 1329837 10 ml bottle
1329467 50 ml bottle
1329505 250 ml bottle
1330333 1 liter bottle

Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

WHEN SHOULD A LOCTITE® HELPFUL HINTS 138
PRIMER BE USED?
Yes Threadlockers
LOCTITE® anaerobic threadlockers cure (1) in
the absence of air, and (2) in the presence of
metal ions. When assembling inactive metal
parts – which are low in metal ions – use of
a LOCTITE® Primer is strongly recommended
to ensure proper performance.

Wicking Grade INACTIVE METALS ACTIVE METALS
(PRIMERS RECOMMENDED) (PRIMERS
OPTIONAL)
High – Red Medium/High – PLATED PARTS SILVER
(Disassemble with heat) Green ANODIZED ALUMINUM GOLD IRON
(ALODINE®, IRIDITE™) ZINC PLAIN STEEL
TITANIUM PURE COPPER
STAINLESS STEEL BRASS
GALVANIZED STEEL ALUMINUM† BRONZE
MAGNETITE STEEL MANGANESE
INCONEL™ CADMIUM MONEL™
NICKEL KOVAR™
MAGNESIUM
263™ NEW 268™ 290™
NATURAL OR
Liquid Anaerobic Semisolid Liquid Anaerobic CHEMICAL
Anaerobic Green BLACK OXIDE
Red 25/55
400/600 Red 90/260 Primers also help speed up cure rates. Fixture time
Thixotropic 20 min. can be reduced from several hours to minutes,
290/290 Semisolid 24 hrs. allowing faster assembly and production throughput.
10 min.
24 hrs. 311/83 -65°F to 300°F LOCTITE® primers are also recommended when
-65°F to 360°F 5 min. 7088™, 7649™, assembling metal parts that are cold, have large gaps
24 hrs. or deep threads.
Not Required -65°F to 300°F 7471™
7088™, 7649™, NOTE: Using a primer will decrease ultimate
7471™ bond strength.

LOCTITE® 263™ Red LOCTITE® 268™ LOCTITE® 290™
Threadlocker Threadlocker Threadlocker

High Strength/Primerless Semisolid/High Strength/ Wicking Grade/High
Primerless Strength
Versatile, high strength
liquid threadlocker. Semisolid stick form is Recommended for locking THREADLOCKING PREP STEPS HELPFUL HINTS
Reliably locks and seals convenient, portable and preassembled fasteners,
metal fasteners up to great for hard-to-reach i.e., instrumentation • Clean parts with LOCTITE® ODC-Free
1 in. Engineered to cure applications. Engineered screws, electrical Cleaner & Degreaser before applying
consistently on a variety of to cure consistently connectors and set screws. threadlocker.
metals including stainless on a variety of metals Also seals porosities in
steel and most plated including stainless steel welds and metal parts. • If the parts were in contact with aqueous
fasteners. Tolerates minor and most plated fasteners. Mil Spec (S-46163A) washing solutions or cutting fluids, which
surface contaminants, anti- Tolerates minor surface Type III, Grade R. leave a protective layer on the surface,
corrosion and protection contaminants, anti- NSF/ANSI 61 Certified. wash with hot water before use.
fluids. Rated for 360°F corrosion and protection
(180°C). Heat required fluids. Rated to 300°F P/N Package Size • If the threadlocker will be applied below
for removal. (180°C). Heat required 40°F, pretreat parts with LOCTITE® 7649™
for removal. 29005 0.5 ml capsule Primer N™.
P/N Package Size 29021 10 ml bottle
P/N Package Size 29031 50 ml bottle † Pure aluminum is an inactive metal. Alloys of aluminum containing
1330582 0.5 ml capsule 29041 250 ml bottle copper are considered active metals.
1330583 10 ml bottle 37685 9 g stick 29043 1 liter bottle
1330585 50 ml bottle 37686 19 g stick
1330335 250 ml bottle
1330334 1 liter bottle

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Threadlockers

LOCTITE® General-Purpose Threadlocker Properties Chart

139 KEY KEY Low Strength TYPICAL USE PRODUCT ITEM PACKAGE COLOR VISCOSITY† TORQUE‡ TEMP. CURE SPEED AGENCY
FACTORS FEATURES NUMBER TYPE & SIZE Purple (cP) IN.-LBS. RANGE (STEEL @ 25°C) APPROVALS
Small screws 222™ (BREAK/PREVAIL)
Small under 1/4" 21463 10 ml bottle 1,200 / -65°F to Fixture – 20 min. N/A
Fasteners 21464 50 ml bottle 5,000 53 / 30 300°F Full – 24 hrs.
Thixotropic

General- 1⁄4" to 3⁄4" bolts, 243™ 1330255 0.5 ml capsule Blue 1,300 / 3,000 230 / 40 -65°F to Fixture – 10 min. NSF/ANSI 61, CFIA Listed
Purpose 1329837 10 ml bottle Blue Thixotropic 360°F Full – 24 hrs.
Threadlocking primerless, tolerates 1329467 50 ml bottle
1329505 250 ml bottle Semisolid 226* / 36
surface contaminates 1330333 1 liter bottle

GENERAL-PURPOSE THREADLOCKERS Medium Strength Semisolid 1⁄4" to 3⁄4" bolts, 248™ 37684 9 g stick -65°F to Fixture – 5 min. CFIA Listed
37087 19 g stick 300°F Full – 24 hrs.
Stick overhead, hard-

to-reach areas

Tape 1⁄4" to 3⁄4" QUICKTAPE® 1372603 260" roll Blue Tape 74 / 47 -65°F to Fixture – 30 min. CFIA Listed
bolts, overhead, 249™ Red 400 / 600 290 / 290* 300°F Full – 24 hrs.
General- pre-dispensed, 263™ 1330582 0.5 ml capsule Red Semisolid 311* / 83
Purpose hard-to-reach areas 1330583 10 ml bottle Green 25 / 55 90 / 260 -65°F to Fixture – 10 min. NSF/ANSI 61, CFIA Listed
268™ 1330585 50 ml bottle 360°F Full – 24 hrs.
Semisolid Primerless, up to 1330335 250 ml bottle
High Strength Stick 1" bolts, tolerates 1330334 1 liter bottle -65°F to Fixture – 5 min. CFIA Listed
surface contaminants 37685 9 g stick 300°F Full – 24 hrs.
General- 37686 19 g stick
Purpose Up to 3⁄4" bolts,
primerless, overhead, 0.5 ml capsule
hard-to-reach areas, 10 ml bottle
tolerates surface 50 ml bottle
contaminants 250 ml bottle
1 liter bottle
Wicking Grade Medium/high strength, 290™ 29005 -65°F to Fixture – 20 min. MIL-S-46163A for existing
wicking grade for 29021 300°F Full – 24 hrs. designs,
preassembled parts 29031 ASTM D-5363**,
and weld sealing 29041 NSF/ANSI 61,
29043 NSF P1, CFIA Listed

LOCTITE® Specialty Threadlocker Properties Chart

KEY KEY TYPICAL USE PRODUCT ITEM PACKAGE COLOR VISCOSITY† TORQUE‡ TEMP. CURE SPEED AGENCY
FACTORS FEATURES NUMBER TYPE & SIZE Blue (cP) IN.-LBS. RANGE (STEEL @ 25°C) APPROVALS
High temperature, 246™ (BREAK/PREVAIL)
High medium strength 29513 10 ml bottle 2,600 -65°F to Fixture – 5 min. N/A
Temperature 2422™ 29514 50 ml bottle 170 / 48* 450°F Full – 24 hrs.
29515 250 ml bottle
SPECIALTY THREADLOCKERS Ultra High Ultra high temperature, 30 g syringe Blue Paste 102 / 12 -65°F to Fixture – 30 min. N/A
Temperature medium strength for 1134601 650°F Full – 24 hrs.
Medium Strength 1⁄2" to 3⁄4" bolts 50 ml bottle
Enhanced 2400 NA™ 1526121 250 ml bottle Blue 3,070 160 / 20 -65°F to Fixture – 5 min. N/A
Health & Safety Removable strength 1526122 300°F Full – 24 hrs.

Thixotropic

Food Compliant For use in food & 2046™ 1186840 0.40 fl. oz. dual Blue Paste 111 / 60 -65°F to Fixture – 90 min. 21 C.F.R. § 175.300
beverage applications 2432™ 1197606 cartridge (12 ml) 300 400°F Full – 24 hrs.
25523 Static Mix
Low For use in nuclear Nozzle (10 pk) 150 / 53 -65°F to Fixture – 30 min. N/A
Halogen/ facilities (black oxide 300°F Full – 24 hrs.
Low Sulfur 50 ml bottle Blue steel nuts
and bolts)

ITEMS IN RED = Source’s PICK or NEW * Break loose value. PLEASE NOTE: A complete line of surface primers is available. Refer to the Surface Cleaning section, 131-134.
= Indicates Worldwide Availability ** For new designs.
† Brookfield RVT spindle 3.20 RPM/25 RPM.
‡ M10 steel nuts and bolts.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Specialty Threadlocker Properties Chart

KEY KEY TYPICAL USE PRODUCT ITEM PACKAGE COLOR VISCOSITY† TORQUE‡ TEMP. CURE SPEED AGENCY
FACTORS FEATURES NUMBER TYPE & SIZE Red (cP) IN.-LBS. RANGE (STEEL @ 25°C) APPROVALS
Red (BREAK/PREVAIL) CFIA Listed
High Temperature High temperature 272™ 27240 50 ml bottle Red 9,500 -65°F to Fixture – 1 hr.
applications 2620™ 27270 250 ml bottle 200 / 220 450°F Full – 24 hrs. CFIA Listed
Ultra High 2700 NA™ 27285 1 liter bottle
SPECIALTY THREADLOCKERS Temperature Ultra high temperature, 1138282 30 g syringe Paste 161 / 10 -65°F to Fixture – 30 min. N/A
high strength for 650°F Full – 24 hrs.
High Strength Enhanced Health 1⁄2" to 3⁄4" bolts 1526123 50 ml bottle
& Safety High strength 1526565 250 ml bottle 5,000 300 / 265 -65°F to Fixture – 5 min.
300°F Full – 24 hrs.
Thixotropic

High Lubricity Large bolts >7/8": 2047™ 1134607 50 ml bottle Black 2,000 / 375 / 80 -65°F to Fixture – 90 min. CFIA Listed
(Large Bolts) High lubricity delivers 20 g bottle 300°F Full – 24 hrs.
higher clamp load 12,000 140
Plastic than 277™ -65°F to Fixture – 1.5 min. N/A
Fasteners Thixotropic 180°F Full – 24 hrs.
For small metal and
Plastic plastic fasteners and 425™ 42540 Blue 80 4/2
tamper-proofing
ASSURE™

LOCTITE® MIL Spec Threadlocker Properties Chart Threadlockers

KEY TYPICAL USE PRODUCT ITEM PACKAGE COLOR VISCOSITY† TORQUE‡ TEMP. CURE SPEED AGENCY
FACTORS NUMBER TYPE & SIZE Purple (cP) IN.-LBS. RANGE (STEEL @ 25ºC) APPROVALS
222MS™ (BREAK/PREVAIL)
Medium Strength Low Strength Easy removal, 22205 0.5 ml capsule 1,200 / -65°F to Fixture – 10 min. MIL-S-46163A for existing
small screws 22221 10 ml bottle 5,000 53 / 30 300°F Full – 24 hrs. designs, ASTM D-5363**,
under 1⁄4" 22231 50 ml bottle Thixotropic NSF P1, CFIA Listed
22241 250 ml bottle

Removable grade, 242® 24205 0.5 ml capsule Blue 1,200 / 110 / 43 -65°F to Fixture – 5 min. MIL-S-46163A for existing
1⁄4" up to 3⁄4" bolts 24221 10 ml bottle 300°F Full – 24 hrs. designs, ASTM D-5363**,
24231 50 ml bottle 5,000 NSF/ANSI 61, NSF P1,
24241 250 ml bottle ABS, CFIA Listed
24243 1 liter bottle Thixotropic

MIL SPEC THREADLOCKERS High strength locking, 262™ 26205 0.5 ml capsule Red 1,800 / 189 / 275 -65°F to Fixture – 10 min. MIL-S-46163A for existing
up to 3⁄4" bolts 26221 10 ml tube 300°F Full – 24 hrs. designs, ASTM D-5363**,
26231 50 ml bottle 5,000 NSF P1, ABS, CFIA Listed
26241 250 ml bottle
26243 1 liter bottle Thixotropic

High Strength High strength for 271™ 27105 0.5 ml capsule Red 500 250 / 275 -65°F to Fixture – 10 min. MIL-S-46163A for existing
fasteners up to 27121 10 ml bottle 300°F Full – 24 hrs. designs, ASTM D-5363**,
1" diameter 27131 50 ml bottle UL Classified for U.S., CFIA Listed
27141 250 ml bottle
Permanent for large 277™ 27143 1 liter bottle Red 7,000 275 / 275 -65°F to Fixture – 60 min. MIL-S-46163A for existing
bolts >7⁄8" 300°F Full – 24 hrs. designs, ASTM D-5363**
21434 10 ml bottle
Low strength wicking 220™ 27731 50 ml bottle Blue 20 85 / 170 -65°F to Fixture – 6 min. MIL-S-46163A for
grade for preassembled 290™ 27741 250 ml bottle 300°F Full – 24 hrs. existing designs,
Wicking Grade fasteners under 1⁄4" 27743 1 liter bottle Green 25 / 55 90 / 260 ASTM D-5363**, CFIA Listed
-65°F to Fixture – 20 min.
Medium/high strength, 37388 10 ml bottle 300°F Full – 24 hrs. MIL-S-46163A for existing
wicking grade for 39186 50 ml bottle designs, ASTM D-5363**,
preassembled parts 22041 250 ml bottle NSF/ANSI 61, NSF P1, CFIA Listed

29005 0.5 ml capsule
29021 10 ml bottle
29031 50 ml bottle
29041 250 ml bottle
29043 1 liter bottle

LOCTITE® Activator Properties Chart

LOCTITE® PRODUCT ITEM PACKAGE TYPE & SIZE COLOR VISCOSITY BASE ON-PART DRY TIME APPLICATION AGENCY APPROVALS
Teal (cP) No solvent LIFE None
7088™ 1069258 17 g stick Anaerobics CFIA Listed
PRIMER Dark Semisolid No solvent 30 days
7090™ 19368 1 fl. oz. bottle Blue 17.5 Acetone/
12695 1 liter bottle Amber 2 Isopropanol 1 hour None Anaerobics N/A
7471™ 19267
ACTIVATORS PRIMER T™ 22477 1.75 fl. oz. bottle Clear/ 2 Acetone 7 days 30 to 70 Anaerobics MIL-S-22473E for
4.5 oz. net wt. Green seconds Anaerobics existing designs,
aerosol can ASTM D-5363 for new
7649™ 19268 1 gallon can 30 days 30 to 70 designs, CFIA Listed
PRIMER N™ seconds
19269 1.75 fl. oz. glass bottle MIL-S-22473E for
21347 25 g net wt. aerosol can existing designs, ASTM
21348 4.5 oz. net wt. D-5363 for new designs,
aerosol can NSF/ANSI 61,
19266 1 gallon can NSF P1, CFIA Listed

ITEMS IN RED = Source’s PICK or NEW ** For new designs.
= Indicates Worldwide Availability † Brookfield RVT spindle 3.20 RPM/25 RPM.
‡ M10 steel nuts and bolts.

PLEASE NOTE: A complete line of surface primers is available. Refer to the Surface Cleaning section, 131-134.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

www.equipment.loctite.com

Threadlocker
Equipment

YOUR EQUIPMENT Source

For more details, see the LOCTITE® Equipment
Sourcebook, LT-3669, or visit us on the web for additional

141 information, diagrams, products and our full line of

equipment at www.equipment.loctite.com.

Threadlocker Equipment LOCTITE® PRODUCT ITEM NUMBER USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY RANGE PACKAGE TYPES CONSUMABLES – DISPENSE
HANDHELD APPLICATORS
BOTTLE DISPENSING & SIZES ACCESSORIES

50 ML AND 250 ML 98414 Retaining Compounds, 50 ml bottle Low to Medium Manual Dispense Tips and
HAND PUMPS 97001 Threadlockers 250 ml bottle Accessories –
Pages 176-177

TUBE DISPENSING 1083845 Any 50 ml tube 50 ml tubes Low to High Manual N/A

50 ML-F TUBE
SQUEEZE
DISPENSER

LOCTITE® PRODUCT ITEM PRESSURE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
NUMBER REGULATION RANGE
INTEGRATED RESERVOIR CONTROLLERS SENSING ACCESSORIES

INTEGRATED 1390322 0 to 15 psi Gel Adhesives, 250 ml bottle Low to Yes Dispense Tips and
SEMI-AUTOMATIC 1390321 0 to 100 psi Instant Adhesives, 1 lb. bottle Medium Yes Accessories –
DISPENSER Light Cure/Acrylics, Retaining 1 liter bottle Pages 176-177
Compounds, Threadlockers 2 kg bottle Medium
200 g squeeze tube to High

RESERVOIRS

CONTROLLERS & RESERVOIRS BOND-A-MATIC® 982720 0 to 15 psi Gel Adhesives, 250 ml bottle Low to Yes Dispense Tips and
3000 RESERVOIR 982726 0 to 100 psi Instant Adhesives, 1 lb. bottle Medium No Accessories –
982723 Light Cure/Acrylics, Retaining 1 liter bottle Yes Pages 176-177
982727 Compounds, Threadlockers 2 kg bottle Medium No
98090 200 g squeeze tube to High

SHOT MISER™ 982880 0 to 100 psi Instant Adhesives, Light 250 ml bottle Low to High No
RESERVOIR N/A Cure/Acrylics, Retaining
Compounds, Threadlockers 1 lb. bottle
4 LITER GRAVITY
FEED RESERVOIR Retaining Compounds, 200 g squeeze tube
Threadlockers
Direct Fill Low to Yes
Medium

MULTI-FUNCTION CONTROLLER 1406023 0 to 100 psi Primers, Accelerators, Activators 250 ml bottle Low No Use with Loctite®
1 lb. bottle Spray Valve 98520
LOCTITE® SPRAY 1 liter bottle
VALVE CONTROLLER 2 kg bottle
200 g squeeze tube

ITEMS IN RED = Source’s PICK or NEW

For more LOCTITE® branded equipment, go to page 165. Can't find what you're looking for? Visit www.equipment.loctite.com.

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

www.equipment.loctite.com

LOCTITE® PRODUCT ITEM DISPENSE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY VACUUM CONSUMABLES – DISPENSE
NUMBER PATTERNS RANGE SUCK-BACK ACCESSORIES
VOLUMETRIC BOTTLE DISPENSING
98548 Dot, Drop, Instant Adhesives, Light Any Bottle 0 to Programmable Dispense Tips and
BENCHTOP PERISTALTIC Bead Cure/Acrylics, Retaining 5,000 cP Accessories –
DISPENSE SYSTEMS DISPENSER Pages 176-177
Compounds, Threadlockers

COMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEM

BOND-A-MATIC® 3000 982719 Dot, Drop, Gel Adhesives, Instant 200 ml bottle Low N/A Dispense Tips and
DISPENSER 0-15 PSI Bead Adhesives, Light Cure/ 1 lb. bottle Accessories –
Acrylics, Retaining 1 liter bottle Medium Pages 176-177
Compounds, Threadlockers 2 kg bottle to High
BOND-A-MATIC® 3000 982722 200 g squeeze tube
DISPENSER 0-100 PSI

142

LOCTITE® PRODUCT ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE ACTUATION CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT ACCESSORIES
GENERAL-PURPOSE APPLICATORS
97130 Pneumatic Low Drop, Dot, Instant Adhesives, Retaining Yes Foot Dispense Tips and Threadlocker Equipment
LV HAND-HELD
APPLICATOR Bead Compounds, Threadlockers Accessories –

Pages 176-177

HANDHELD VALVES GENERAL-PURPOSE APPLICATORS 97111 Manual Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes Finger Dispense Tips and
Bead Compounds, Threadlockers Foot Accessories –
MANUAL HAND- Pages 176-177
HELD APPLICATOR

PNEUMATIC HAND- 97112 Pneumatic Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes
HELD APPLICATOR Bead Compounds, Threadlockers

PNEUMATIC HAND- 97116 Pneumatic Low to Medium Drop, Dot, Light Cure/Acrylics, Retaining Yes Finger
HELD APPLICATOR Bead Compounds, Threadlockers

GENERAL-PURPOSE APPLICATORS 97131 Pinch Tube Low to Medium Drop, Dot, Instant Adhesives, Retaining Yes Finger Dispense Tips and
97132 Bead Compounds, Threadlockers Accessories –
VARI-DROP™ Pages 176-177
APPLICATORS

LOCTITE® PRODUCT ITEM TYPE VISCOSITY RANGE DISPENSE USED TO DISPENSE STROKE SUCK-BACK CONSUMABLES – DISPENSE
NUMBER PATTERNS ADJUSTMENT ACCESSORIES
HIGH PRECISION VALVES
LOCTITE® 98520 Spray Valve Low Spray Primers, Accelerators, Yes No 989268 –
SPRAY VALVE Activators 0.014" Nozzle Kit
989269 –
HIGH PRECISION VALVES 0.028" Nozzle Kit
STATIONARY
APPLICATOR 97113 High Precision Low to Medium Drop, Dot, Gel Instant Adhesives, Yes Yes Dispense Tips and
VALVE 97114 Bead Instant Adhesives, Retaining Accessories –
Pages 176-177
Compounds, Threadlockers

HIGH PERFORMANCE DIAPHRAGM VALVES

LIGHT CURE 98009 High Low to Medium Drop, Dot, Light Cure Adhesives, Yes No Dispense Tips and

DISPENSE VALVE Performance Bead Retaining Compounds, Accessories –

VALVES & PUMPS Diaphragm Threadlockers Pages 176-177

CYANOACRYLATE 98013 High Low to Medium Drop, Dot, Instant Adhesives, Retaining Yes No
DISPENSE VALVE Performance
Diaphragm Bead, Compounds, Threadlockers No Dispense Tips and
Accessories –
Microdot Pages 176-177

GENERAL DUTY DIAPHRAGM VALVES 97135 General Duty 0 to 2,500 cP Drop, Dot, Light Cure/Acrylics, No Yes Dispense Tips and
97136 Diagram Accessories –
DIAPHRAGM Bead Instant Adhesives, Retaining Pages 176-177
VALVE
Compounds, Threadlockers
2,500 to 5,000 cP

HIGH VISCOSITY FLUID AND PASTE VALVES High Viscosity Medium to High Drop, Anaerobic Gasketing, Yes
POPPET VALVE 986300 Retaining Compounds,
Threadlockers
Fluid and Paste Bead

POSITIVE DISPLACEMENT PUMP

POSITIVE 983330 Positive Low to Medium Drop Retaining Compounds, Yes No Dispense Tips and

DISPLACEMENT Displacement Threadlockers, Any single- Accessories –

PUMP Pump component, non-moisture- Pages 176-177
curing, low- to medium-

viscosity fluid (<100,000 cP)

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

143 Thread Sealing

Thread Sealing 143 THREAD SEALING

145 Thread Sealants
149 Thread Sealant Equipment

WHY USE A LOCTITE® THREAD SEALANT? ADVANTAGES OF LOCTITE® THREAD SEALANTS AS
COMPARED TO TRADITIONAL SEALANT TYPES:
LOCTITE® Thread Sealants prevent leakage of gasses and liquids.
Designed for low- and high-pressure applications, they fill the • Single-component – clean and easy to apply
space between threaded parts and provide an instant, low- • Do not creep, shrink or block systems
pressure seal. When fully cured they seal to the burst pressure of • Can be used on any size of pipe fitting
most pipe systems. • Replace all types of tape and paste sealants
• The seal resists vibration and shock loads
LOCTITE® SEALANTS ARE MUCH SUPERIOR • Products are available with potable water and gas approvals
TO TRADITIONAL SEALANT TYPES: • Protect mated threaded areas against corrosion and galling

• Solvent-based sealing compounds: Shrink during
cure as solvents evaporate. Fittings must be
re-torqued to minimize voids. They lock the assembly by a
combination of friction and deformation.

• PTFE tape: Lubricates in off direction, allowing fittings to
loosen under dynamic loads resulting in loss of clamping
force and leakage. Dynamic loads may accelerate creep,
causing leakage over time. The lubricating effect of
PTFE frequently results in over-tightening of fasteners,
adding stress or causing breakage of parts. Application
requires good professional skills to avoid stressing fittings
or castings.

Henkel Adhesive and Sealant Product Specialists are
available to assist you with new product designs, or to
help you re-engineer an existing application for improved
performance and cost savings. They can also set up testing
of your parts at the Henkel Customer Engineering Center.
For application assistance, call 1-800-LOCTITE (562-8483);
within Canada, call 1-800-263-5043; or, contact us through
the web at www.henkelna.com/loctite.

STRAIGHT FROM The Source

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

Thread Sealing 144 Thread Sealing

Old Way: Pastes, Tapes & Dopes

Better Way: Loctite® Thread Sealants

• Complete contact between threads, 100% seal
• Will not creep, shrink, shred or block systems
• Easy disassembly
• Prevent corrosion

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Thread Sealants

145 Your ApplicationThread Sealing ARE THE PARTS METAL OR PLASTIC?
Metal Parts
• Prevent leaks
• Single component – quick and easy Are you working with hydraulic fittings?
Yes No
to apply
• Can be used on any size pipe fitting Do you prefer a paste or a semisolid?

and seal to the burst strength of Paste
most piping systems
• Prevent thread corrosion LOCTITE® 545™ LOCTITE® 565™ LOCTITE® 567™
• Seal and secure metal pipes and Thread Sealant Thread Sealant Thread Sealant
fittings, filling the space between
threaded metal parts and hardening (Hydraulic & Pneumatic)
to prevent leakage
• Designed for high- and low-pressure Anaerobic Anaerobic Anaerobic
applications Purple White White
• Controlled strength for ease of 14,000
disassembly 10,000 300,000 540,000
10,000 10,000
Solution 24 hours 24 hours 24 hours
-65°F to 300°F -65°F to 300°F -65°F to 400°F
Chemistry 7088™, 7649™ or 7471™ 7088™, 7649™ or 7471™ 7088™, 7649™ or 7471™

Color LOCTITE® 545™ Thread Sealant LOCTITE® 565™ Thread Sealant LOCTITE® 567™ Thread Sealant

Viscosity (cP) Recommended for fine threaded A general-purpose instant A general-purpose instant
fittings as used in hydraulic and sealant for tapered and straight/ sealant for tapered and straight/
Pressure Resistance (psi) pneumatic installations and tapered fittings. tapered fittings. Rated to 400°F.
small fittings in general. CSA 3319-81 and 3319-01. UL MH007(N).
Cure Time (hours) ABS Approved. UL MH007(N). NSF/ANSI 61 Certified.
CFIA Listed. NSF/ANSI 61 Certified. ULC-Canada Approved.
Temperature Resistance ULC-Canada Approved. CFIA Listed.
CFIA Listed.
Recommended Primer

Product Description

P/N Package Size P/N Package Size P/N Package Size

54505 5 ml capsule 56507 6 ml tube 56707 6 ml tube
32429 10 ml bottle 56531 50 ml tube 56747 50 ml tube
54531 50 ml bottle 56541 250 ml tube 56765 250 ml tube
54541 250 ml bottle 56571 300 ml cartridge 33241 350 ml brush-top can
56543 1 liter bottle 56790 1 liter bottle
56566 10 liter bottle

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

WHEN SHOULD A LOCTITE® HELPFUL HINTS 146
PRIMER BE USED?
Plastic
LOCTITE® anaerobic thread sealants cure (1)
in the absence of air, and (2) in the presence Thread Sealants
of metal ions. When assembling inactive metal
parts – which are low in metal ions – use of a
LOCTITE® Primer is strongly recommended to
ensure proper performance.

INACTIVE METALS ACTIVE METALS
(PRIMERS RECOMMENDED) (PRIMERS
OPTIONAL)

PLATED PARTS SILVER IRON
ANODIZED ALUMINUM GOLD PLAIN STEEL
(ALODINE®, IRIDITE™) ZINC COPPER
TITANIUM PURE BRASS
STAINLESS STEEL BRONZE
GALVANIZED STEEL ALUMINUM† MANGANESE
MAGNETITE STEEL MONEL™
INCONEL™ CADMIUM KOVAR™
NICKEL
Semisolid MAGNESIUM

NATURAL OR
CHEMICAL
BLACK OXIDE

LOCTITE® 561™ Pipe LOCTITE® No More Primers also help speed up cure rates. Fixture time
Sealant with PTFE Leaks™ can be reduced from several hours to minutes,
allowing faster assembly and production throughput.

LOCTITE® primers are also recommended when
assembling metal parts that are cold, have large
gaps or deep threads.

Anaerobic Non-Anaerobic NOTE: Using a primer will decrease ultimate
White White bond strength.

Semisolid 90,000 to 110,000
10,000 5,000
24 hours
24 hours
-65°F to 300°F -65°F to 300°F
7088™, 7649™ or 7471™
N/A

LOCTITE® 561™ Pipe Sealant LOCTITE® No More Leaks™ THREAD SEALING PREP STEPS HELPFUL HINTS
with PTFE
Recommended for use on • Clean parts with LOCTITE® ODC-Free
Semisolid stick form is threaded plastic fittings Cleaner & Degreaser before applying thread
convenient, portable and less carrying hot or cold water, sealant.
messy. Formulated for fast, i.e., industrial and agricultural
reliable curing on metal, tapered plastic water pipe systems, or • If the parts were in contact with aqueous
pipe threads and fittings. drainage systems. washing solutions or cutting fluids, which
Provides high pressure sealing leave a protective layer on the surface,
and withstands continuous P/N Package Size wash with hot water before use.
operating temperatures of -65°F 1537780 16 oz. brush-top can
to 300°F (-54°C to 150°C). • If the thread sealant will be applied below
NSF/ANSI 61 Certified. 40°F, pretreat parts with LOCTITE® 7649™
Primer N™.
P/N Package Size

37127 19 g stick

† Pure aluminum is an inactive metal. Alloys of aluminum containing
copper are considered active metals.

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

Thread
Sealants

LOCTITE® Liquid Anaerobic Thread Sealant Properties Chart

147 LOCTITE® PRODUCT ITEM PACKAGE TYPICAL USE COLOR & VISCOSITY (cP) TEMPERATURE PRESSURE RECOMMENDED AGENCY APPROVALS
NUMBER TYPE & SIZE APPEARANCE Semisolid RANGE RESISTANCE (psi) PRIMER
561™ General-purpose, UL Classified
37127 19 g stick portable, overhead White Paste -65°F to 10,000 7088™, 7649™ for U.S.,
300°F or 7471™ CFIA Listed,
NSF/ANSI 61
GENERAL-PURPOSE 565™ 56507 6 ml tube Controlled strength White 300,000 -65°F to 10,000 7088™, 7649™
56531 50 ml tube 300°F or 7471™ CSA International,
577™ 56541 250 ml tube Medium strength, UL Classified for U.S.,
Thread Sealing 567™ 56571 300 ml cartridge coarse threads Yellow 24,000/80,000 -65°F to 10,000 7088™, 7649™ NSF/ANSI 61,
5770™ 56543 1 liter bottle White Thixotropic 300°F 10,000 or 7471™ CFIA Listed,
56566 10 liter bottle ULC Classified
540,000 -65°F to 7088™, 7649™ for Canada
21456 50 ml tube 400°F or 7471™
21457 250 ml tube N/A

LOW HALOGEN HYDRAULIC & PNEUMATIC HIGH TEMPERATURE 56707 6 ml tube For stainless steel Off-White Paste -65°F to N/A 7088™, 7649™ UL Classified for U.S.,
56747 50 ml tube and all other Paste 530°F or 7471™ ABS, CFIA Listed,
56765 250 ml tube metal fittings NSF/ANSI 61,
33241 350 ml brush-top can ULC Classified
56790 1 liter bottle High temperature for Canada

1138284 50 ml tube N/A
1138281 250 ml tube

592™ 59214 6 ml tube Medium strength White 350,000 -65°F to 10,000 NF™ CFIA Listed
545™ 59231 50 ml tube 400°F
59241 250 ml tube 7088™, 7649™ ABS, CFIA Listed
59243 1 liter bottle Pneumatic hydraulic Purple 14,000 -65°F to 10,000 or 7471™
sealant, no fillers 300°F
54505 0.5 ml capsule
32429 10 ml bottle
54531 50 ml bottle
54541 250 ml bottle

5452™ 1265769 50 ml tube Pneumatic hydraulic Purple 29,000/200,000 -65°F to 10,000 7088™, 7649™ N/A
FAST CURE 1265770 250 ml tube sealant, no fillers or 7471™
Thixotropic 300°F

569™ 56931 50 ml bottle Original hydraulic Brown 400 -65°F to 10,000 7088™, 7649™ CFIA Listed
56941 250 ml bottle sealant 300°F or 7471™

580™ 58031 50 ml tube Low halogen, White 600,000 -65°F to 10,000 N/A N/A
5772™ 25524 50 ml bottle 7,500 300°F 10,000 N/A N/A
5802™ 1313319 50 ml tube low sulfur, PTFE-free Paste 10,000
-65°F to N/A N/A
554™ Low halogen, low Yellow 2,500 300°F
sulfur, medium 7088™, 7649™ CFIA Listed
strength, fast cure Off- -65°F to or 7471™
White 300°F
Low halogen, high
CHEMICAL 25882 10 ml bottle purity, medium Red -65°F to 10,000
RESISTANCE 55441 250 ml bottle strength, high 300°F
viscosity

Refrigerant sealant,
high strength

ITEMS IN RED = Source’s PICK or NEW = Indicates Worldwide Availability

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com

LOCTITE® Liquid Non-Anaerobic Thread Sealant Properties Chart

LOCTITE® ITEM PACKAGE TYPICAL USE COLOR AND VISCOSITY (cP) TEMPERATURE PRESSURE RECOMMENDED AGENCY
PRODUCT NUMBER TYPE & SIZE APPEARANCE RANGE APPROVALS
RESISTANCE (psi) PRIMER
THREAD SEALANT
SOLVENT-BASED WITH PTFE 1527514 1 pint brush can General-purpose, White Paste 50,000 to 60,000 -65°F to 300°F 5,000 N/A CFIA Listed
metal pipes,
PIPE JOINT added lubricity
COMPOUND
1534294 1 pint brush can General-purpose, Black Paste 35,000 to 45,000 -65°F to 400°F 5,000 N/A N/A
NO MORE LEAKS™ non-shredding,
chemical resistant
55™ PIPE
SEALING CORD 1537780 16 oz. brush- Plastic pipes, White Paste 90,000 to -65°F to 300°F 5,000 N/A CFIA Listed

THREAD SEAL top can easy disassembly 110,000
TAPE WITH PTFE
35082 5,700" Metal and plastic White Coated N/A Up to 300°F 10,000 N/A NSF-61 148
compatible, allows Cord N/A
NON-CURING post-adjustment

39904 1/2" x 520" General-purpose, White Tape N/A Up to 500°F Pressure Rating N/A
x 0.003" oxygen service for Pipe
compatible
Thread Sealants
LOCTITE® Activator Properties Chart

LOCTITE® ITEM PACKAGE TYPE & SIZE COLOR VISCOSITY BASE ON-PART DRY TIME APPLICATION AGENCY APPROVALS
PRODUCT 1069258 17 g stick (cP) LIFE

7088™ PRIMER Teal Semisolid No solvent 30 days None Anaerobics CFIA Listed

7090™ PRIMER 19368 1 fl. oz. bottle Dark 17.5 No solvent 1 hour None Anaerobics N/A
12695 1 liter bottle Blue 2
ACTIVATORS 7471™ Acetone/ 7 days 30 to 70 Anaerobics MIL-S-22473E for
PRIMER T™ 19267 1.75 fl. oz. bottle Amber existing designs,
22477 4.5 oz. net wt. aerosol can ASTM D-5363 for new
7649™ 19268 1 gallon can Isopropanol seconds designs, CFIA Listed
PRIMER N™
19269 1.75 fl. oz. glass bottle Clear/ 2 Acetone 30 days 30 to 70 Anaerobics MIL-S-22473E for
21347 25 g net wt. aerosol can Green seconds existing designs, ASTM
21348 4.5 oz. net wt. aerosol can D-5363 for new designs,
19266 1 gallon can NSF/ANSI 61, NSF P1,
CFIA Listed

= Indicates Worldwide Availability

The Adhesive Sourcebook 2015: Your Source for LOCTITE® products for design, assembly, manufacturing and maintenance

www.equipment.loctite.com

Thread Sealant
Equipment

YOUR EQUIPMENT Source

For more details, see the LOCTITE® Equipment
Sourcebook, LT-3669, or visit us on the web for additional

149 information, diagrams, products and our full line of

equipment at www.equipment.loctite.com.

Thread Sealant Equipment LOCTITE® PRODUCT ITEM NUMBER USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY RANGE PACKAGE TYPES CONSUMABLES – DISPENSE
HANDHELD APPLICATORS
BOTTLE DISPENSING & SIZES ACCESSORIES

50 ML AND 250 ML 98414 Retaining Compounds, 50 ml bottle Low to Medium Manual Dispense Tips and
HAND PUMPS 97001 Threadlockers 250 ml bottle Accessories –
Pages 176-177

TUBE DISPENSING 1083845 Any 50 ml tube 50 ml tubes Low to High Manual N/A

50 ML-F TUBE
SQUEEZE
DISPENSER

LOCTITE® PRODUCT ITEM PRESSURE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY LOW LEVEL CONSUMABLES – DISPENSE
NUMBER REGULATION RANGE
INTEGRATED RESERVOIR CONTROLLERS SENSING ACCESSORIES

INTEGRATED 1390322 0 to 15 psi Gel Adhesives, 250 ml bottle Low to Yes Dispense Tips and
SEMI-AUTOMATIC 1390321 0 to 100 psi Instant Adhesives, 1 lb. bottle Medium Yes Accessories –
DISPENSER Light Cure/Acrylics, Retaining 1 liter bottle Pages 176-177
Compounds, Threadlockers 2 kg bottle Medium
200 g squeeze tube to High

RESERVOIRS

CONTROLLERS & RESERVOIRS BOND-A-MATIC® 982720 0 to 15 psi Gel Adhesives, 250 ml bottle Low to Yes Dispense Tips and
3000 RESERVOIR 982726 0 to 100 psi Instant Adhesives, 1 lb. bottle Medium No Accessories –
982723 Light Cure/Acrylics, Retaining 1 liter bottle Yes Pages 176-177
982727 Compounds, Threadlockers 2 kg bottle Medium No
98090 200 g squeeze tube to High

SHOT MISER™ 982880 0 to 100 psi Instant Adhesives, Light 250 ml bottle Low to High No
RESERVOIR N/A Cure/Acrylics, Retaining
Compounds, Threadlockers 1 lb. bottle
4 LITER GRAVITY
FEED RESERVOIR Retaining Compounds, 200 g squeeze tube
Threadlockers
Direct Fill Low to Yes
Medium

MULTI-FUNCTION CONTROLLER 1406023 0 to 100 psi Primers, Accelerators, Activators 250 ml bottle Low No Use with LOCTITE®
1 lb. bottle Spray Valve 98520
LOCTITE® SPRAY 1 liter bottle
VALVE CONTROLLER 2 kg bottle
200 g squeeze tube

LOCTITE® PRODUCT ITEM DISPENSE USED TO DISPENSE PACKAGE TYPES & SIZES VISCOSITY VACUUM CONSUMABLES – DISPENSE
NUMBER PATTERNS RANGE
PINCH TUBE APPLICATORS SUCK-BACK ACCESSORIES
DIAL-A-SEAL® APPLICATORS
DISPENSE 998400 N/A Pipe Sealants 50 ml tube Medium N/A Dispense Tips and
ITEMS IN RED = Source’s PICK or NEWSYSTEMS 250 ml tube to High Accessories –
1 liter bottle Pages 176-177

U.S.: 1-800-LOCTITE (562-8483) Canada: 1-800-263-5043 www.henkelna.com/loctite www.equipment.loctite.com