Free WAEC Auto Body Repairs and Spray Painting Past Questions

SC611 2 &1 Name:
WASSCE 2016 Index Number:
AUTO BODY REPAIR
AND SPRAY
PAINTING 2 &1
Essay and Objective
2 ½ hours

THE WEST AFRICAN EXAMINATIONS COUNCIL
West African Senior School Certificate Examination for School Candidates

SC 2016 https://stcharlesedu.comAUTO BODY REPAIR AND SPRAY PAINTING 2 & 1 2 ½ hours

Do not open this booklet until you are told to do so. While you are waiting, read the following instructions carefully
write your name and index number in the spaces provided at the top right-hand comer of this booklet

This booklet consist of two papers, Paper 2 & 1, Answer Paper 2 which comes first in your answer booklet and
Paper1 in your Objective Test answer sheet. Paper 2 will last for 1 ½ hours after which the answer booklet will
be collected. Do not start paper 1 until you are told to do so. Paper 1 will last for 1 hour

https://stcharlesedu.comAnswer all the questions

Each question is followed by four options lettered A to D. Find the correct option for each question
and shade in pencil on your answer sheet. The answer space which bears the same letter to the
option you have chosen

Give only one answers to each questions. An example is given below

A Commercial vehicle always has twin tyres fitted side by side because

A. double brake drums are needed to retard the vehicle
B. of the risk of puncturing a tyre.
C. two tyres per wheel must be fitted when a fully floating shaft is used.
D. the load acting on a single tyre would be above the legal limit.

The correct answer is the load acting on a single tyre would be above the legal limits which is
letterd D and therefore answer space D would be shaded

[A] [B] [C] [D]

Think carefully before you shade the answer spaces; erase completely any answers(s) you wish to
change.

Do all rough work on this questions paper

Now answer the following questions.

1. Safety in the workshop is meant to prevent
A. injury
B. unseriousness
C. unrest
D. idleness

2. Accident is best prevented in the workshop by
A. organizing training programmes
B. adherence to rules and regulations
C. playing practical jokes.
D. misusing hand tools and equipment

3. The first treatment given to an injured person in the workshop is called
A. recovery
B. dispensary
C. red cross.
D. first aid

4. Which of the following is not a cutting tool?
A. Chisel
B. Punch
C. Snips
D. Hacksaw

5. Which of the following tools is used for beating vehicle panels?
A. Chisel
B. Body file
C. Screwdriver
D. Spanner

https://stcharlesedu.com6. Air compressor is used for
A. spray blooming
B. brushing
C. spray painting
D. soaking

7. Which of the following types of maintenance is carried out on a spray gun after use?
A. Preventive
B. Selective
C. Predictive
D. Corrective

8. The following arc types of body filler except
A. seal filler
B. plastic filler
C. fibre glass
D. body solder

9. Sanding disc is used in body finishing for
A. beating and straightening
B. straightening and denting
C. straightening and smoothing
D. smoothing and crushing

10. Manufacturers paint guide contains the following information except
A. durability of paints
B. quality of paints
C. quantity of paints
D. texture of paints

11. Which of the following is not a type of rivet pin?
A. Snap head
B. Ball pein
C. Pan head
D. Countersunk

12. The ore of aluminum is
A. calamine
B. cassiterite
C. pyrite
D. bauxite

13. The merits of aluminum alloys in automobile construction include the following except
A. good appearance
B. lightness in weight
C. durability,
D. ease of soldering

14. The furnace used to produce pig iron is
A. blast furnace
B. puddling
C. cupola
D. electric furnace

15. The following are properties of steel, except
A. hardness
B. malleability
C. brittleness
D. toughness

39 Which of the follow me is the most important factor of production?
A. Capital
B. Land
C. Entrepreneur
D. Power

40. The reward for the use of land is
A. rent.
B. profit
C. interest
D. wage
https://stcharlesedu.com

https://stcharlesedu.comHow to get WAEC Auto Body Repair and
Spray Painting Past Questions and
Answers

To get the complete and more recent copy of the WAEC Auto Body Repair and Spray
Painting Past Questions for Objective Test, and Essay or Theory

Take Note of the following step

1. TAKE ACTION
Whatsapp us on 08051311885 for account number to make payment and how to received
your PDF Copy

2. MODE OF PAYMENT.
Mobile Transfer, POS or Direct Bank Deposit.

3. AFTER PAYMENT.
Send us the following
Depositor Name:
Name of Product Paid for:
Valid email address.

4. DELIVERY ASSURANCE.
We will deliver the past question to you, 5 minutes after confirmation of payment to the
email address you will send to us.

WHAT OTHERS ARE DOWNLOADING

WAEC Past Questions

NECO Past Questions

Primary School Past Questions

Junior Secondary School Past Questions

Senior Secondary School Past Questions

Lesson Note

School of Nursing Past Questions and Answers

https://stcharlesedu.com PAPER 2
Essay

[60 mark]
Answer four questions only

1. (a) Explain what technician is doing in the sketch shown above.
(b) (i) Name the tools labelled X. V and Z.
(ii) State the respective purpose of X and Z
(c) State three safety, precautions that must be observed by the technician

2. (a) State the purpose of each of the following heat treatment processes
(i) tempering.
(ii) normalizing.

(b) (i) What is a ferrous metal?
(ii) List two types of steel used in Auto Body construction and Repair

(c) Stale two differences between oxygen and acetylene cylinders used m gas welding

3.

4.

5. (a) List the three constituents of paint
(b) State two causes of spray fog
(c) With the aid of a sketch, show
(i) correct spray pattern
(ii) heavy centred pattern.