AWNING 22 SCISSORS ARM - Truth Hardware

AWNING 22 SCISSORS ARM
OPERATOR

For the window design that requires a MATERIAL: High-pressure die-cast RECOMMENDED SCREWS:
face-mounted operator, Truth has zinc case, crank handle and knob. Types of screws required determined by
developed a special version of our Hardened steel drive worm and gear material of profile used. Refer to
Awning Roto Gear Operator that arms. Optional stainless steel arms. drawings for complete information on
incorporates the case from our 22 screw type and quantity needed (sold
Series Operators with the functional FINISH: Electrostatically applied, separately). For additional information
capabilities of the 11 Series Awning durable coatings that provide excellent regarding screw selection - see Truth
Roto Gear Operator. This operator is resistance to chipping, scratching and Tips and Tech Note #11.
designed to provide positive control of corrosion while maintaining color
the sash in any position, while stability for years in direct sunlight. TRUTH TIPS:
producing a secure pull-in of the Please refer to Truth’s Color Chart for 1. Operator mounting screws must
window at its’ corners. A simple examples of Truth’s most popular finish pass through one PVC wall and Truth
detach feature is available that options. Truth also offers a wide range Backing Plates #20947 or one PVC
disengages the operator from the sash of decorative “plated” finishes - contact wall and one insert wall. Track
for quick window removal and for ease Truth for additional information on mounting screws must pass through
in installation. Available in both front- availability of these finishes on two PVC walls or one PVC wall and
mount and rear-mount models. Also specific product lines. one insert wall. For this reason, it is
incorporating an adjustable stabilizing necessary to use a longer screw than is
tab (optional), which helps reduce ORDERING INFORMATION: recommended.
flexing of window frame during 1. Choose operator style desired
operation. (specify by part number). 2. When selecting mounting screws for
Truth hardware, coating compatibility is
WARRANTY: Protected under the 2. Specify finish number. one of the most important criteria.
terms of the Truth Warranty for Window For best corrosion resistance the
and Door Manufacturers and Authorized 3. Select mounting hardware (sold coating on the screws should be the
Distributors. Refer to Truth’s Terms separately): same as the coating on the hardware.
and Conditions for further details. #11454 - Contour Handle (painted) or For more information see Tech Note
#10579 - Roto Gear Operator Handle - #11.
PRODUCT APPLICATION shown above (painted).
ASSISTANCE: If you are designing a Optional handle styles, such as Truth’s 3. This operator is intended for single
new window profile, or are having Folding Handle, are also available. vent applications only, and should not
difficulty selecting hardware for your be used on multi-vent applications.
window, please contact Truth. Our highly Order Sash Hooks - see drawings for
trained Technical Service Staff can assist the available model that best fits your 4. For accurate hardware replacement,
you with the selection of the appropriate window design. pre-drilling is recommended.
hardware to meet your performance #12789 - Stabilizing Tab Kit
requirements, as well as providing #20189 - Backing Grommet (optional). 5. Truth recommends that Backing
personalized application drawings. #20947 - Backing Plate. Plates (#20947) and/or a Stability Tab
#30171 - Rubber-cork adhesive backed (#12789) be used for added support to
LOGO OPTIONS: Have you gasket (optional). the operator in an effort to reduce the
considered personalizing your window #21306 - Protective red plastic spline amount of flex experienced in many
with your company name or logo? All cap (optional). PVC Profile Systems.
of Truth’s operator handles are capable
of accepting your own “signature”. 41
Contact Truth for further details.

CORROSION PROTECTION:
Truth’s E-Gard® Hardware has a multi-
stage coating process that produces a
superior physical and aesthetic finish.
Plus, it is resistant to a wider range of
corrosive materials, including industrial
cleaning materials and environmental
pollutants. This proprietary process
has been tested to be approximately
three times better than common zinc
plated finishes.

For the severe conditions associated with
coastal areas, Truth has stainless steel
hardware. See Tech Note #7 for further
information about corrosion protection
and these special hardware options.

22 SCISSORS ARM
OPERATOR

TRUTH TIPS (con't): 9. This operator can be used with all INCLUDE TRUTH SPECS ON
6. For metal window profiles, Truth Truth 13 Series Awning and 4-Bar YOUR NEXT WINDOW PROJECT
recommends machine screws. Hinges. To insure maximum operator Window operators shall be provided
However, in most applications, sheet efficiency, it is important that operator, which allow easy adjustment of
metal screws will provide adequate hinge, and sash height be properly window position. The mechanism
holding power. matched. Consult sash size table found should be crank operated and provide
in the Hinge section of the catalog. wide range of open positions.
7. Butt Hinges can be used with the Connection to the movable sash must
pivot shoe operator, however, some 10. A Spline Cap (#21306) is available be easily detachable for window
degree of sash chatter will usually to protect the operator splines from dirt cleaning and maintenance.
occur. Chatter is caused by the weight and other windows from damage during
of the window pushing the operator shipping, installation, and final Window operators will be of scissors
closed rather than the operator pulling building construction. arm design driven by hand crank. The
the window closed. operator must be constructed of
E-Gard® components, hardened steel
8. A window operator alone provides worm and gear arms and high pressure
poor forced entry resistance and must zinc alloy die castings.
always be used in conjunction with
sash locks when forced entry resistance Window Operators shall be 22 series
is required. Scissors Arm Awning Operator as
manufactured by Truth Hardware,
Owatonna, MN.

41a

22 SCISSORS ARM 20008 SASH HOOK
OPERATOR BRACKET SHOWN

FIG. 1 APPLICATION 22 SCISSORS ARM OPERATOR O

A MIN

SASH
FRAME

B ARM CLEARANCE TAPPED #8-32
(.218 MIN. SCREW
20947 BACKING PLATE (2) ENGAGEMENT)
(20189 BACKING GROMMET
CAN ALSO BE USED) REAR MOUNT
SEE FIG. 3
7.750
196.85mm

SASH HOOK .780 C-SINK FOR
MOUNT HOLES 19.81mm #10 SCREW

E MIN C FRONT MOUNT
SEE FIG. 2
SASH

D MIN FRAME OPTIONAL NOTE:
STABILIZING TAB
OPERATOR W WTO DETERMINE THE MINIMUM DIMENSION
MOUNT HOLES
FOR OPERATOR ARM CLEARANCE, ADD HOOK

H ODIMENSION ( ) TO OPERATOR CONSTANT ( )

SASH HOOK C D MIN E MIN H W =H+ O
20008
40543 .090 (2.3mm) .220 (5.6mm) .560 (14.2mm) +.410 (10.4mm)
.549 (13.9mm)
*31336 N/A +.845 (21.5mm)

±.160 (4.1mm)

O*31336 SASH HOOK BRACKET WILL ADD OR SUBTRACT FROM DIMENSION.

OPERATOR A B MOUNTING STABILIZING APPROXIMATE O
PART NO. FRONT TAB SASH
OVERALL ARM REAR DIMENSION
22.21 WIDTH CLEARANCE ORDER OPENING
22.22 .250 (6.4mm) (PN 12789) 1.403 (35.6mm)
22.23 21.50 (546.1mm) 15.00 (381.0mm) 1.497 (38.0mm)
22.27 .340 (8.6mm)
22.28 16.00 (406.4mm) 10.00 (254.0mm) 1.403 (35.6mm)
22.29 .250 (6.4mm) 1.497 (38.0mm)
21.50 (546.1mm) 15.00 (381.0mm)
.340 (8.6mm)
16.00 (406.4mm) 10.00 (254.0mm)

41b

22 SCISSORS ARM
OPERATOR

FIG. 2 FRONT MOUNT CUT OUT DETAILS

4X PILOT FOR #10 SCREWS 2.750 2.750
OR .25DIA HOLES FOR 69.9mm 69.9mm

(P/N 20189) GROMMETS .110
2.8mm
.344 3.063 3.063 FROM CL
8.7mm 77.8mm 77.8mm OF MOUNTING
HOLES TO CL
PILOT FOR A 3.500 3.500 OF SLOT
#8 SCREW 88.9mm 88.9mm
.625
STABILIZING TAB 15.9mm

RECOMMENDED SCREWS: (AVAILABLE WITH OR WITHOUT STABILIZING TAB) .625
15.9mm
OPERATORS:
.250
FRONT MOUNT: 4 (P/N 19700.XX) #10-24 X .688 PHILLIPS, FLAT HEAD, STEEL SHEET METAL SCREWS 6.4mm

1 STABILIZING TAB UNIT PACK (P/N 12789) .110
2.8mm
1 (P/N 19215.92) #8 X .750 PHILLPS, PAN HEAD, STEEL, SHEET METAL SCREW (STABILITY TAB) FROM LC
NOTE: SCREW LENGTH AND THREAD TYPE WILL BE DETERMINED BY PROFILE. OF MOUNTING
HOLES TO CL
FIG. 3 REAR MOUNT CUT OUT DETAILS 2.750 2.750 OF SLOT
69.9mm 69.9mm .625
2X Ø .296 15.9mm
7.5mm
.625
.344 3.500 3.500 15.9mm
8.7mm 88.9mm 88.9mm
.250
PILOT FOR A 6.4mm
#8 SCREW

STABILIZING TAB

RECOMMENDED SCREWS: (AVAILABLE WITH OR WITHOUT STABILIZING TAB)

OPERATORS:

REAR MOUNT: 2 (P/N 19535.XX) #8-32 X .312 PHILLIPS, TRUSS HEAD, STEEL, MACHINE SCREWS
1 STABILIZING TAB UNIT PACK (P/N 12789)
1 (P/N 19215.92) #8 X .750 PHILLPS, PAN HEAD, STEEL, SHEET METAL SCREW (STABILITY TAB)

NOTE: SCREW LENGTH AND THREAD TYPE WILL BE DETERMINED BY PROFILE.

41c

22 SCISSORS ARM
OPERATOR

FIG. 4 SASH HOOK 20008.XX

.250 .500
(6.4mm) (12.7mm)

2.625 .410 (H)
(66.7mm)
(10.4mm)
RECOMMENDED SCREWS:
WOOD: 2 (P/N 19240.XX) #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS
PVC & METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)

FIG. 5 SASH HOOK 40543.XX

1.312 .845 (H)
(33.3mm)
(21.5mm)
.938
(23.8mm) 1.122
(28.3mm)
.776
(19.7mm)

.188 .409 (C)
(4.8mm)
(10.4mm)
RECOMMENDED SCREWS:
WOOD: 2 (P/N 19230.XX) #8 X 1.0 PHILLIPS, PAN HEAD, SHEET METAL SCREWS
PVC & METAL: 2 - #8 PHILLIPS, PAN HEAD SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)

FIG. 6 SASH HOOK 31336.XX

.160 (H)

(4.06mm)

.688
(17.5mm)

.250
(6.4mm)

2.625 .500 (C)
(66.7mm)
(12.7mm)

RECOMMENDED SCREWS:

WOOD: 2 (P/N 19240.XX) #8 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS 41d
PVC & METAL: 2 - #8 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)

22 SCISSORS ARM
OPERATOR

FIG. 7 GASKET 30171 7.750
(196.9mm)
.750
(19.1mm)

7.0 .031
(177.8mm) (.8mm)

FIG. 8 BACKING PLATE 20947.XX .437 2X .190 .500
(11.1mm) (4.8mm) (12.7mm)
.19
4.83mm 2X Ø .172
(4.4mm)
NOTES:
BACKING PLATE IS DESIGNED FOR #8 SCREW TO .104
PASS THROUGH FOR REAR MOUNT APPLICATIONS (2.6mm)
AND FOR A #10 SCREW TO TAP INTO IT FOR A FRONT
MOUNT APPLICATIONS. FIG. 10 STABILIZING TAB 12789

FIG. 9 BACKING GROMMET 20189

.156 .930 .500
4.00mm 23.62mm 12.70mm

.110 .250
2.80mm 6.35mm

90° Ø .260 .560 1.120
41e 6.60mm 14.22mm 28.45mm

# 10 -24 NC 2X .418 HOLE FOR #8
10.62mm PAN HEAD SCREW
Ø .359
9.12mm

NOTE:
I

700 WEST BRIDGE ST REET, OWATONNA, MN 55060 I 507. 451.5620 800.866.7884 I TRUTH.COM