Encitech Webcatalogue No3

D-Sub Filter Connectors

Order Codes - Standard Plug Connector D09 PZ/2 FP102 Socket Connector D09 SZ/2 FP102
Option X (Standard) D15 PZ/2 FP102 D15 SZ/2 FP102
09 3305-0100-01 D25 PZ/2 FP102 09 3305-0100-11 D25 SZ/2 FP102
Ø 3.05mm Holes 15 3305-0100-02 D37 PZ/2 FP102 15 3305-0100-12 D37 SZ/2 FP102
25 3305-0100-03 25 3305-0100-13
37 3305-0100-04 37 3305-0100-14

Order Codes - Option A01 - Back Nut UNC 4-40

Option A01 Plug Connector D09 PZ/2 FP102 M85UN Socket Connector D09 SZ/2 FP102 M85UN
D15 PZ/2 FP102 M85UN D15 SZ/2 FP102 M85UN
Back Nut, UNC 4-40 09 3305-0100-01-A01 D25 PZ/2 FP102 M85UN 09 3305-0100-11-A01 D25 SZ/2 FP102 M85UN
15 3305-0100-02-A01 D37 PZ/2 FP102 M85UN 15 3305-0100-12-A01 D37 SZ/2 FP102 M85UN
25 3305-0100-03-A01 25 3305-0100-13-A01
37 3305-0100-04-A01 37 3305-0100-14-A01

Order Codes - Option A03 - Back Nut + Screw Nut, 5mm Thread, UNC 4-40

Option A03 Plug Connector D09 PZ/2 FP102 M85UNB5 Socket Connector D09 SZ/2 FP102 M85UNB5
D15 PZ/2 FP102 M85UNB5 D15 SZ/2 FP102 M85UNB5
Back Nut, UNC 4-40 + 09 3305-0100-01-A03 D25 PZ/2 FP102 M85UNB5 09 3305-0100-11-A03 D25 SZ/2 FP102 M85UNB5
Screw Nut, UNC 4-40 15 3305-0100-02-A03 D37 PZ/2 FP102 M85UNB5 15 3305-0100-12-A03 D37 SZ/2 FP102 M85UNB5
25 3305-0100-03-A03 25 3305-0100-13-A03
37 3305-0100-04-A03 37 3305-0100-14-A03

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 201

D-Sub Filter Connectors

Solder Pin, Straight (FP)

Specifications:

Insulator: UL 94 V-0 Thermoplastic
Contacts: Copper Alloy
Plating: Hard Gold over Nickel
Shell: Steel, Tin plated

Test Voltage V.r.m.s./NM: 250V DC

Working Voltage: 100V DC

Current Rating: 5A (20°C)

Contact Resistance: max 10mΩ

Insulation Resistance: ≥ 5GΩ at 100V DC

Operating Temperature: -55°C to +125°C

1000pF as standard. Other filter on request.

Plug connector Socket connector

Size A B C Size A B C
09 30.80 16.79 25.00 09 30.80 16.46 25.00
15 39.20 25.12 33.30 15 39.20 24.79 33.30
25 53.10 38.84 47.00 25 53.10 38.50 47.00
37 69.50 55.30 63.50 37 69.50 54.96 63.50

Attenuation characteristics - FP

Information:

All Filter connectors are corresponding to
DIN 41652, ML-C-24308 and IEC 807F-2.

Filter Connectors are available in 3 types:
FP: Planar Filter Type
FT: Tubular Type
PI: Pi Tubular Filter Type

FT and PI - On request

Standard Filter values:
330pF - 470pF - 680pF - 1000pF
1500pF - 2200pF - 5600pF - 6800pF

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

202

D-Sub Filter Connectors

Order Codes - Standard Plug Connector D09 PY/2 FP102 Socket Connector D09 SY/2 FP102
Option X (Standard) D05 PY/2 FP102 D15 SY/2 FP102
09 3305-0200-01 D25 PY/2 FP102 09 3305-0200-11 D25 SY/2 FP102
Ø 3.05mm Holes 15 3305-0200-02 D37 PY/2 FP102 15 3305-0200-12 D37 SY/2 FP102
25 3305-0200-03 25 3305-0200-13
37 3305-0200-04 37 3305-0200-14

Order Codes - Option A01 - Back Nut UNC 4-40

Option A01 Plug Connector D09 PY/2 FP102 M85UN Socket Connector D09 SY/2 FP102 M85UN
D15 PY/2 FP102 M85UN D15 SY/2 FP102 M85UN
Back Nut, UNC 4-40 09 3305-0200-01-A01 D25 PY/2 FP102 M85UN 09 3305-0200-11-A01 D25 SY/2 FP102 M85UN
15 3305-0200-02-A01 D37 PY/2 FP102 M85UN 15 3305-0200-12-A01 D37 SY/2 FP102 M85UN
25 3305-0200-03-A01 25 3305-0200-13-A01
37 3305-0200-04-A01 37 3305-0200-14-A01

Order Codes - Option A03 - Back Nut + Screw Nut, 5mm Thread, UNC 4-40

Option A03 Plug Connector D09 PY/2 FP102 M85UNB5 Socket Connector D09 SY/2 FP102 M85UNB5
D15 PY/2 FP102 M85UNB5 D15 SY/2 FP102 M85UNB5
Back Nut, UNC 4-40 + 09 3305-0200-01-A03 D25 PY/2 FP102 M85UNB5 09 3305-0200-11-A03 D25 SY/2 FP102 M85UNB5
Screw Nut, UNC 4-40 15 3305-0200-02-A03 D37 PY/2 FP102 M85UNB5 15 3305-0200-12-A03 D37 SY/2 FP102 M85UNB5
25 3305-0200-03-A03 25 3305-0200-13-A03
37 3305-0200-04-A03 37 3305-0200-14-A03

Order Codes - Option A07 - Brackets for PCB with inner thread UNC 4-40

Option A07 Plug Connector D09 PY/2 FP102 M86UN Socket Connector D09 SY/2 FP102 M86UN
D15 PY/2 FP102 M86UN D15 SY/2 FP102 M86UN
Brackets for PCB + 09 3305-0200-01-A07 D25 PY/2 FP102 M86UN 09 3305-0200-11-A07 D25 SY/2 FP102 M86UN
Inner thread UNC 4-40 15 3305-0200-02-A07 D37 PY/2 FP102 M86UN 15 3305-0200-12-A07 D37 SY/2 FP102 M86UN
25 3305-0200-03-A07 25 3305-0200-13-A07
37 3305-0200-04-A07 37 3305-0200-14-A07

Order Codes - Option A09 - Brackets for PCB with Screw Nut, 5mm thread, UNC 4-40

Option A09 Plug Connector D09 PY/2 FP102 M85UNB5 Socket Connector D09 SY/2 FP102 M85UNB5
D15 PY/2 FP102 M85UNB5 D15 SY/2 FP102 M85UNB5
Brackets for PCB + 09 3305-0200-01-A09 D25 PY/2 FP102 M85UNB5 09 3305-0200-11-A09 D25 SY/2 FP102 M85UNB5
Screw Nut UNC 4-40 15 3305-0200-02-A09 D37 PY/2 FP102 M85UNB5 15 3305-0200-12-A09 D37 SY/2 FP102 M85UNB5
25 3305-0200-03-A09 25 3305-0200-13-A09
37 3305-0200-04-A09 37 3305-0200-14-A09

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 203

D-Sub Filter Connectors

Solder Pin, Angled 9.4 mm (FP)

Specifications:

Insulator: UL 94 V-0 Thermoplastic
Contacts: Copper Alloy
Plating: Hard Gold over Nickel
Shell: Steel, Tin plated

Test Voltage V.r.m.s./NM: 250V DC

Working Voltage: 100V DC

Current Rating: 5A (20°C)

Contact Resistance: max 10mΩ

Insulation Resistance: ≥ 5GΩ at 100V DC

Operating Temperature: -55°C to +125°C

1000pF as standard. Other filter on request.

Plug connector Socket connector

Size A B C Size A B C
09 30.80 16.79 25.00 09 30.80 16.46 25.00
15 39.20 25.12 33.30 15 39.20 24.79 33.30
25 53.10 38.84 47.00 25 53.10 38.50 47.00
37 69.50 55.30 63.50 37 69.50 54.96 63.50

Attenuation characteristics - FP

Information:

All Filter connectors are corresponding to
DIN 41652, ML-C-24308 and IEC 807F-2.

Filter Connectors are available in 3 types:
FP: Planar Filter Type
FT: Tubular Type
PI: Pi Tubular Filter Type

FT and PI - On request

Standard Filter values:
330pF - 470pF - 680pF - 1000pF
1500pF - 2200pF - 5600pF - 6800pF

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

204

D-Sub Filter Connectors

7.4mm Mounting Height with ”Option Bxx” metal bracket is 7.4mm

Order Codes - Standard

Plug Connector D09 PYC/2 FP102 Socket Connector D09 SYC/2 FP102
D05 PYC/2 FP102 D15 SYC/2 FP102
09 3305-0300-01 D25 PYC/2 FP102 09 3305-0300-11 D25 SYC/2 FP102
15 3305-0300-02 D37 PYC/2 FP102 15 3305-0300-12 D37 SYC/2 FP102
25 3305-0300-03 25 3305-0300-13
37 3305-0300-04 37 3305-0300-14

Order Codes - Option B02 - Back Nut UNC 4-40 + Metal Bracket

Plug Connector xxxx-xxxx-xx-B02 Socket Connector xxxx-xxxx-xx-B02

Any Size Any Size

Order Codes - Option B04 - Back Nut + Screw Nut, 5mm Thread, UNC 4-40 + Metal Bracket

Plug Connector xxxx-xxxx-xx-B04 Socket Connector xxxx-xxxx-xx-B04

Any Size Any Size

Order Codes - Option B09 - Back Nut UNC 4-40 + Metal Bracket + Clip

Plug Connector xxxx-xxxx-xx-B09 Socket Connector xxxx-xxxx-xx-B09

Any Size Any Size

Order Codes - Option B11 - Back Nut + Screw Nut, 5mm Thread, UNC 4-40 + Metal Bracket + Clip

Plug Connector xxxx-xxxx-xx-B11 Socket Connector xxxx-xxxx-xx-B11

Any Size Any Size

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 205

D-Sub Filter Connectors

SMD Connectors, 6.3 mm (FP)

Specifications:

Insulator: UL 94 V-0 Thermoplastic
Contacts: Copper Alloy
Plating: Hard Gold over Nickel
Shell: Steel, Tin plated

Test Voltage V.r.m.s./NM: 250V DC

Working Voltage: 100V DC

Current Rating: 5A (20°C)

Contact Resistance: max 10mΩ

Insulation Resistance: ≥ 5GΩ at 100V DC

Operating Temperature: -55°C to +125°C

1000pF as standard. Other filter on request.

Plug connector Socket connector

Size A B C/X Y Z Size A B C/X Y Z
09 30.80 16.79 25.00 10.98 01.37 09 30.80 16.46 25.00 10.98 01.37
15 39.20 25.12 33.30 19.20 01.37 15 39.20 24.79 33.30 19.20 01.37
25 53.10 38.84 47.00 33.12 01.38 25 53.10 38.50 47.00 33.12 01.38
37 69.50 55.30 63.50 49.68 01.38 37 69.50 54.96 63.50 49.68 01.38

Order Codes: D09PYCSMD/2FP102UN Socket Connector D09SYCSMD/2FP102UN
D15PYCSMD/2FP102UN 09 3305-0600-11 D15SYCSMD/2FP102UN
Plug Connector D25PYCSMD/2FP102UN 15 3305-0600-12 D25SYCSMD/2FP102UN
09 3305-0600-01 D37PYCSMD/2FP102UN 25 3305-0600-13 D37SYCSMD/2FP102UN
15 3305-0600-02 37 3305-0600-14
25 3305-0600-03
37 3305-0600-04

Standard Connectors are supplied with Metal bracket
including P.o.F Clip and UNC 4-40 threaded Insert.

For other options - please contact Encitech.

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

206

D-Sub Filter Connectors

90° SMD Connectors - Tape & Reel

Specifications:

Insulator: UL 94 V-0 Thermoplastic
Contacts: Copper Alloy
Plating: Hard Gold over Nickel
Shell: Steel, Tin plated

Test Voltage V.r.m.s./NM: 250V DC
Working Voltage: 100V DC
Current Rating: 5A (20°C)

Contact Resistance: max 10mΩ

Insulation Resistance: ≥ 5GΩ at 100V DC

Operating Temperature: -55°C to +125°C

1000pF as standard. Other filter on request.

Plug connector Socket connector

Size A B C/X Y Z Size A B C/X Y Z
09 30.80 16.79 25.00 10.98 1.37 09 30.80 16.46 25.00 10.98 1.37
15 39.20 25.12 33.30 19.20 1.37 15 39.20 24.79 33.30 19.20 1.37
25 53.10 38.84 47.00 33.12 1.38 25 53.10 38.50 47.00 33.12 1.38
37 69.50 55.30 63.50 49.68 1.38 37 69.50 54.96 63.50 49.68 1.38

Order Codes:

Plug Connector D09PYCSMD/2 FP102 UN-TR Socket Connector D09SYCSMD/2 FP102 UN-TR
09 3305-0700-01 D15PYCSMD/2 FP102 UN-TR 09 3305-0700-11 D15SYCSMD/2 FP102 UN-TR
15 3305-0700-02 D25PYCSMD/2 FP102 UN-TR 15 3305-0700-12 D25SYCSMD/2 FP102 UN-TR
25 3305-0700-03 D37PYCSMD/2 FP102 UN-TR 25 3305-0700-13 D37SYCSMD/2 FP102 UN-TR
37 3305-0700-04 37 3305-0700-14

Reel Outer Diameter: 330 mm
Amount of Connectors: 150 pcs / reel

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 207

DVI Connectors

TECHNICAL SPECIFICATIONS

Material: PVC
Plastic Hood: SPCC, Nickel over Copper

Metal Hood:

Operating Temperature: -30°C to +90°C
Cable Entry: Top
Thumbscrews: UNC 4-40
Cable Diameter: Up to 11,0 mm

Metal Hood / Insert Plastic Hood / Cover

Plastic and Metal Hoods are delivered as Kits.

Order Codes: Product Code: Cable O.D. (max) ØA Ø B Note:
DVI-CM-HA 6,5 mm 6,5 5,5
P/N - BULK: DVI-CM-EB 7,5 mm 7,5 6,5 Commonly ordered Part
3400-0105-01 DVI-CM-AD 8,5 mm 8,5 7,5
3400-0105-02 DVI-CM-FF 9,0 mm 9,0 8,8 Commonly ordered Part
3400-0105-03 DVI-CM-BE 9,5 mm 9,5 9,0
3400-0105-04 DVI-CM-GG 10,0 mm 10,0 9,5 Commonly ordered Part
3400-0105-05 DVI-CM-CH 10,5 mm 11,0 10,0
3400-0105-06 DVI-CM-IH 11,0 mm 11,0 11,0
3400-0105-07 DVI-CM-DI 12,0 mm 12,0 11,0
3400-0105-08
3400-0105-09

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

208

DVI Connectors

TECHNICAL SPECIFICATIONS

Material: Glass-Filled TP BLACK
Connector Housing: UL94 V-0 Class
Brass, Class 1
Contacts: Steel, Tin-plated over Ni
Shell:

Electrical Specifications: 500 V AC R.M.S.
Voltage Rating: 1,5 Amp
Current Rating: 1000 MΩ Min.
Insulation Resistance: 20 mΩ Max. (Initial)
Contact Resistance: -20°C to +85°C
Operating Temperature:

Male Connector Male DVI Connector

- Suitable for Cable and Hood Mounting

Order Codes:

Plug Connector

Size/Type: Part Number: Product Code:
DVI-25-MCD
25-pin Digital-D 3401-0101-04 DVI-29-MCAD

29-pin A/D 3401-0101-05

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 209

DVI Connectors

TECHNICAL SPECIFICATIONS

Material: PVC
Plastic Hood: SPCC, Nickel over Copper

Metal Hood:

Operating Temperature: -30°C to +90°C
Cable Entry: Top
Cable Diameter: Up to 9,5 mm

Metal Hood / Insert DVI-CF-MC Plastic Hood DVI-CF-8.0 / 9.5

Plastic and Metal Hoods are ordered separately.
The Metal Hood DVI-CF-MC suit both the available
Female Plastic Hoods (8,0mm - 9,5mm)

Order Codes:

Metal Hood / Insert Plastic Hood

P/N - BULK: Product Code: Cable O.D. (max) P/N - BULK: Product Code: Cable O.D. (max)
8.0mm 3400-0106-10 DVI-CF-MC 9.5mm
3400-0106-01 DVI-CF-8.0 9.5mm

3400-0106-02 DVI-CF-9.5

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

210

DVI Connectors

TECHNICAL SPECIFICATIONS

Material: Glass-Filled TP
Connector Housing: UL94 V-0 Class
Phosphor, Bronze, Class 1
Contacts: Zinc Alloy, Ni-plated
Shell:

Electrical Specifications: 500V AC
Voltage Rating: 1,5 Amp
Current Rating: 1000 MΩ Min.
Insulation Resistance: 20 mΩ Max. (Initial)
Contact Resistance: -20°C to +85°C
Operating Temperature:

Male DVI Connector

Female Connector

- Suitable for Cable and Hood Mounting

Order Codes:

Plug Connector

Size/Type: Part Number: Product Code:
DVI-25-FCD
25-pin Digital-D 3401-0101-14 DVI-29-FCAD

29-pin A/D 3401-0101-15

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 211

Hoods with Connectors - Kits

Plastic Hoods

All our plastic hoods & covers are produced in High quality materials and can be supplied in a variety of options.
Our complete range of protective hoods and covers with D-Sub connectors - Packed in Kits - can be found on
www.encitech.com.

Examples of different kits available:

Unshielded Plastic Hoods Shielded Plastic Hoods Metal Hoods

• Plastic Housing • Metalized Plastic Housing • Metal / Diecast Housing

• Top or Side Entry • Top or Side Entry • Top or Side Entry
• Available with Solder Cup or Crimp • Available with Solder Cup or Crimp • Available with Solder Cup or Crimp

style D-Sub connector style D-Sub connector style D-Sub connector

• Standard or High Density types • Standard or High Density types • Standard or High Density types

• Special Kits including Tooling • Many different cable entry styles

All parts are RoHS 2 compliant.
All our manufactured parts are recycable.

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

212

Hoods with Connectors - Kits

Plastic Hoods Metalized Plastic Hoods Full Metal Hoods

Plastic Hoods

Our plastic hoods are produced in high quality UL-recognized plastic material.

Metalized Plastic Hoods

Our metalized plastic hoods are produced in high quality UL-recognized plastic material, covered with a thin surface of cop-
per, nickel and chrome, all for an excellent shielding performance.

Full metal Hoods

Our full metal hoods are produced in zinc, with a surface of copper, nickel and chrome for an excellent shielding.

Swedish National Testing and Researh Institute

All our shielded D-Sub hoods are tested by the Swedish National Testing and Research Institute. (SP)
Shielding effectiveness equal to or better than 40dB from 0 Hz up to 1GHz.

D-Sub Solder Cup High Density Solder Cup D-Sub Crimp

D-Sub Solder Cup

Housing - Stamped steel - Tin Plated
Insulator - Black or White
Class 3 - Stamped and Formed pins - 100 insert min
Class 1 - Machined Contact pins - 500 insert min

High Density Solder Cup

Housing - Stamped steel - Tin Plated
Class 3 - Stamped and Formed pins - 100 insert min

D-Sub Crimp

Housing - Stamped steel - Tin Plated
Class 2 - Machined pins - 200 insert min

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 213

Hoods with Connectors - Kits

DPPK-P DTPK-P D45PK-P TRI-P
• See page 214 • See page 218 • See page 221 • See page 224

DPPK-M DSSK-M DTPK-M D45PK-M
• See page 227 • See page 232 • See page 235 • See page 238

TRI-M DTNT-M D45NT-M MHDM
• See page 241 • See page 244 • See page 247 • See page 250

MHDM35 DTZK DTZK-BK DTCK
• See page 253 • See page 256 • See page 260 • See page 263

All parts are RoHS 2 compliant.
All our manufactured parts are recycable.

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

214

Hoods with Connectors - Kits

D45ZK D45ZK-BK DTZF D45ZF
• See page 266 • See page 270 • See page 273 & 281 • See page 277

DCMR-FK DCMR-ULP DTSL-LJS-T DTSL-LJS-S
• See page 285 • See page 288 • See page 291 • See page 295

DTSL-SJS-T DTSL-SJS-S DTZI DCRP
• See page 299 • See page 303 • See page 307 • See page 310

All parts are RoHS 2 compliant.
All our manufactured parts are recycable.

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 215

Plastic Hoods DPPK-BK+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: Polyamid, UL-recognised
-55°C to +105°C
Housing material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size Dim A Dim B Dim C
9-way 31,5 34,0 15,0
● Available in sizes 9-15-25-37-50 15-way 40,0 34,0 15,0
● Supplied with standard solder cup Sub-D connector 25-way 53,5 34,0 15,0
37-way 70,0 40,0 15,0
50-way 67,5 40,0 19,0

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0001-01 DPPK09-BK-DBP-K 9-way 6355-8001-01 DPPK09-BK-DBP-W-K
15-way 6355-0001-02 DPPK15-BK-DBP-K 15-way 6355-8001-02 DPPK15-BK-DBP-W-K
25-way 6355-0001-03 DPPK25-BK-DBP-K 25-way 6355-8001-03 DPPK25-BK-DBP-W-K
37-way 6355-0001-04 DPPK37-BK-DBP-K 37-way 6355-8001-04 DPPK37-BK-DBP-W-K
50-way 6355-0001-05 DPPK50-BK-DBP-K 50-way 6355-8001-05 DPPK50-BK-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0054-01 DPPK09-BK-DMP-K 9-way 6355-8054-01 DPPK09-BK-DMP-W-K
15-way 6355-0054-02 DPPK15-BK-DMP-K 15-way 6355-8054-02 DPPK15-BK-DMP-W-K
25-way 6355-0054-03 DPPK25-BK-DMP-K 25-way 6355-8054-03 DPPK25-BK-DMP-W-K
37-way 6355-0054-04 DPPK37-BK-DMP-K 37-way 6355-8054-04 DPPK37-BK-DMP-W-K
50-way 6355-0054-05 DPPK50-BK-DMP-K 50-way 6355-8054-05 DPPK50-BK-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

216

Plastic Hoods DPPK-BK+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: Polyamid, UL-recognised
-55°C to +105°C
Housing material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size Dim A Dim B Dim C
9-way 31,5 34,0 15,0
● Available in sizes 9-15-25-37-50 15-way 40,0 34,0 15,0
● Supplied with standard solder cup Sub-D connector 25-way 53,5 34,0 15,0
37-way 70,0 40,0 15,0
50-way 67,5 40,0 19,0

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0001-11 DPPK09-BK-DBS-K 9-way 6355-8001-11 DPPK09-BK-DBS-W-K
15-way 6355-0001-12 DPPK15-BK-DBS-K 15-way 6355-8001-12 DPPK15-BK-DBS-W-K
25-way 6355-0001-13 DPPK25-BK-DBS-K 25-way 6355-8001-13 DPPK25-BK-DBS-W-K
37-way 6355-0001-14 DPPK37-BK-DBS-K 37-way 6355-8001-14 DPPK37-BK-DBS-W-K
50-way 6355-0001-15 DPPK50-BK-DBS-K 50-way 6355-8001-15 DPPK50-BK-DBS-W-K

Size: P/N - Kitted: Class 1 - 100 inserts min. Size: P/N - Kitted: Class 1 - 100 inserts min.

9-way 6355-0054-11 DPPK09-BK-DMS-K 9-way 6355-8054-11 DPPK09-BK-DMS-W-K
15-way 6355-0054-12 DPPK15-BK-DMS-K 15-way 6355-8054-12 DPPK15-BK-DMS-W-K
25-way 6355-0054-13 DPPK25-BK-DMS-K 25-way 6355-8054-13 DPPK25-BK-DMS-W-K
37-way 6355-0054-14 DPPK37-BK-DMS-K 37-way 6355-8054-14 DPPK37-BK-DMS-W-K
50-way 6355-0054-15 DPPK50-BK-DMS-K 50-way 6355-8054-15 DPPK50-BK-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 217

Plastic Hoods DPPK-BK+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: Polyamid, UL-recognised
-55°C to +105°C
Housing material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size Dim A Dim B Dim C
9-way 31,5 34,0 15,0
● Available in sizes HD15-26-44-62-78 15-way 40,0 34,0 15,0
● Supplied with standard solder cup Sub-D connector 25-way 53,5 34,0 15,0
37-way 70,0 40,0 15,0
50-way 67,5 40,0 19,0

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0011-01 DPPK09-BK-HDP15-K HD 15 6355-0011-11 DPPK09-BK-HDS15-K
HD 26 6355-0011-02 DPPK15-BK-HDP26-K HD 26 6355-0011-12 DPPK15-BK-HDS26-K
HD 44 6355-0011-03 DPPK25-BK-HDP44-K HD 44 6355-0011-13 DPPK25-BK-HDS44-K
HD 62 6355-0011-04 DPPK37-BK-HDP62-K HD 62 6355-0011-14 DPPK37-BK-HDS62-K
HD 78 6355-0011-05 DPPK50-BK-HDP78-K HD 78 6355-0011-15 DPPK50-BK-HDS78-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

218

Plastic Hoods DPPK-BK+Crimp

TECHNICAL SPECIFICATIONS

D-Sub Hood: Polyamid, UL-recognised
-55°C to +105°C
Housing material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

D-Sub Crimp: PBT, Black, UL94 V-0
Stamped Steel, Tin Plated
Insulator: Copper Alloy
Shell: 200 inserts min
Contact pins: Hard Gold over Nickel
Machined pins Class 2: -55°C to +125°C
Contacts Plating: 1000V
Operating Temperature: <5GΩ
Test voltage: AWG 24-20
Insulator resistance: 0.2 - 0.6mm²
Crimp Area (AWG):

Features: Size Dim A Dim B Dim C
9-way 31,5 34,0 15,0
● Available in sizes 9-15-25-37-50 15-way 40,0 34,0 15,0
● Supplied with standard solder cup Sub-D connector 25-way 53,5 34,0 15,0
37-way 70,0 40,0 15,0
50-way 67,5 40,0 19,0

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

9-way 6355-0078-01 DPPK09-DBCP-K 9-way 6355-0078-11 DPPK09-DBCS-K
15-way 6355-0078-02 DPPK15-DBCP-K 15-way 6355-0078-12 DPPK15-DBCS-K
25-way 6355-0078-03 DPPK25-DBCP-K 25-way 6355-0078-13 DPPK25-DBCS-K
37-way 6355-0078-04 DPPK37-DBCP-K 37-way 6355-0078-14 DPPK37-DBCS-K
50-way 6355-0078-05 DPPK50-DBCP-K 50-way 6355-0078-15 DPPK50-DBCS-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 219

Plastic Hoods DTPK-P+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm
Colour: Black

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DTPK-P Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes 9-15-25-37 39,5 41,5 15,0
● Suitable for any common Sub-D connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0032-01 DTPK-P-09-DBP-K 9-way 6355-8032-01 DTPK-P-09-DBP-W-K
15-way 6355-0032-02 DTPK-P-15-DBP-K 15-way 6355-8032-02 DTPK-P-15-DBP-W-K
25-way 6355-0032-03 DTPK-P-25-DBP-K 25-way 6355-8032-03 DTPK-P-25-DBP-W-K
37-way 6355-0032-04 DTPK-P-37-DBP-K 37-way 6355-8032-04 DTPK-P-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0033-01 DTPK-P-09-DMP-K 9-way 6355-8033-01 DTPK-P-09-DMP-W-K
15-way 6355-0033-02 DTPK-P-15-DMP-K 15-way 6355-8033-02 DTPK-P-15-DMP-W-K
25-way 6355-0033-03 DTPK-P-25-DMP-K 25-way 6355-8033-03 DTPK-P-25-DMP-W-K
37-way 6355-0033-04 DTPK-P-37-DMP-K 37-way 6355-8033-04 DTPK-P-37-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

220

Plastic Hoods DTPK-P+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm
Colour: Black

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DTPK-P Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes 9-15-25-37 39,5 41,5 15,0
● Suitable for any common Sub-D connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0032-11 DTPK-P-09-DBS-K 9-way 6355-8032-11 DTPK-P-09-DBS-W-K
15-way 6355-0032-12 DTPK-P-15-DBS-K 15-way 6355-8032-12 DTPK-P-15-DBS-W-K
25-way 6355-0032-13 DTPK-P-25-DBS-K 25-way 6355-8032-13 DTPK-P-25-DBS-W-K
37-way 6355-0032-14 DTPK-P-37-DBS-K 37-way 6355-8032-14 DTPK-P-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0033-11 DTPK-P-09-DMS-K 9-way 6355-8033-11 DTPK-P-09-DMS-W-K
15-way 6355-0033-12 DTPK-P-15-DMS-K 15-way 6355-8033-12 DTPK-P-15-DMS-W-K
25-way 6355-0033-13 DTPK-P-25-DMS-K 25-way 6355-8033-13 DTPK-P-25-DMS-W-K
37-way 6355-0033-14 DTPK-P-37-DMS-K 37-way 6355-8033-14 DTPK-P-37-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 221

Plastic Hoods DTPK-P+High Density D-sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews: Up to 11,5mm
Black
Cable O.D:
Colour:

D-Sub High Density: PBT, Black, UL94 V-0
Stamped Steel, Tin Plated
Insulator: Copper Alloy
Shell: 100 inserts min
Contact pins: Selective Gold over Nickel
Stamped & Formed pins: -55°C to +105°C
Contacts Plating: 500V for 1 minute
Operating Temperature: 500MΩ min
Withstanding voltage:
Insulator resistance:

Features: Size DTPK-P Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes HD15-26-44-62 39,5 41,5 15,0
● Suitable for any common Sub-D connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0053-01 DTPK-P-09-HDP15-K HD 15 6355-0053-11 DTPK-P-09-HDS15-K
HD 26 6355-0053-02 DTPK-P-15-HDP26-K HD 26 6355-0053-12 DTPK-P-15-HDS26-K
HD 44 6355-0053-03 DTPK-P-25-HDP44-K HD 44 6355-0053-13 DTPK-P-25-HDS44-K
HD 62 6355-0053-04 DTPK-P-37-HDP62-K HD 62 6355-0053-14 DTPK-P-37-HDS62-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

222

Plastic Hoods D45PK-P+D-Sub Solder Cup Male
+D-Sub Solder Cup Male
TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Side
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews: Up to 11,5mm
Black
Cable O.D:
Colour:

Male Sub-D Connector:

Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size D45PK-P Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes 9-15-25-37 39,5 40,3 15,0
● Suitable for any common Sub-D connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0034-01 D45PK-P-09-DBP-K 9-way 6355-8034-01 D45PK-P-09-DBP-W-K
15-way 6355-0034-02 D45PK-P-15-DBP-K 15-way 6355-8034-02 D45PK-P-15-DBP-W-K
25-way 6355-0034-03 D45PK-P-25-DBP-K 25-way 6355-8034-03 D45PK-P-25-DBP-W-K
37-way 6355-0034-04 D45PK-P-37-DBP-K 37-way 6355-8034-04 D45PK-P-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0035-01 D45PK-P-09-DMP-K 9-way 6355-8035-01 D45PK-P-09-DMP-W-K
15-way 6355-0035-02 D45PK-P-15-DMP-K 15-way 6355-8035-02 D45PK-P-15-DMP-W-K
25-way 6355-0035-03 D45PK-P-25-DMP-K 25-way 6355-8035-03 D45PK-P-25-DMP-W-K
37-way 6355-0035-04 D45PK-P-37-DMP-K 37-way 6355-8035-04 D45PK-P-37-DMP-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 223

Plastic Hoods D45PK-P+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material

Material:

Operating Temperature: -55°C to +110°C

Cable Entry: Side

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm
Colour: Black

Female Sub-D Connector:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size D45PK-P Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes 9-15-25-37 39,5 40,3 15,0
● Suitable for any common Sub-D connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0034-11 D45PK-P-09-DBS-K 9-way 6355-8034-11 D45PK-P-09-DBS-W-K
15-way 6355-0034-12 D45PK-P-15-DBS-K 15-way 6355-8034-12 D45PK-P-15-DBS-W-K
25-way 6355-0034-13 D45PK-P-25-DBS-K 25-way 6355-8034-13 D45PK-P-25-DBS-W-K
37-way 6355-0034-14 D45PK-P-37-DBS-K 37-way 6355-8034-14 D45PK-P-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0035-11 D45PK-P-09-DMS-K 9-way 6355-8035-11 D45PK-P-09-DMS-W-K
15-way 6355-0035-12 D45PK-P-15-DMS-K 15-way 6355-8035-12 D45PK-P-15-DMS-W-K
25-way 6355-0035-13 D45PK-P-25-DMS-K 25-way 6355-8035-13 D45PK-P-25-DMS-W-K
37-way 6355-0035-14 D45PK-P-37-DMS-K 37-way 6355-8035-14 D45PK-P-37-DMS-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

224

Plastic Hoods D45PK-P+High Density D-sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood:

Material: UL 94 V-0 Plastic Material

Operating Temperature: -55°C to +110°C

Cable Entry: Side

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm

Colour: Black

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size D45PK-P Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes HD15-26-44-62 39,5 40,3 15,0
● Suitable for any common Sub-D connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0055-01 D45PK-P-09-HDP15-K HD 15 6355-0055-11 D45PK-P-09-HDS15-K
HD 26 6355-0055-02 D45PK-P-15-HDP26-K HD 26 6355-0055-12 D45PK-P-15-HDS26-K
HD 44 6355-0055-03 D45PK-P-25-HDP44-K HD 44 6355-0055-13 D45PK-P-25-HDS44-K
HD 62 6355-0055-04 D45PK-P-37-HDP62-K HD 62 6355-0055-14 D45PK-P-37-HDS62-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 225

Plastic Hoods TRI-P+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood:

Material: UL 94 V-0 Plastic Material

Operating Temperature: -55°C to +110°C

Cable Entry: Side / Top / Side

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm
Colour: Black

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size TRI-P Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes 9-15-25-37 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Supplied with 2 Blanking Plates and 2 Strain Relief clamps. 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0036-01 TRI-P-09-DBP-K 9-way 6355-8036-01 TRI-P-09-DBP-W-K
15-way 6355-0036-02 TRI-P-15-DBP-K 15-way 6355-8036-02 TRI-P-15-DBP-W-K
25-way 6355-0036-03 TRI-P-25-DBP-K 25-way 6355-8036-03 TRI-P-25-DBP-W-K
37-way 6355-0036-04 TRI-P-37-DBP-K 37-way 6355-8036-04 TRI-P-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0037-01 TRI-P-09-DMP-K 9-way 6355-8037-01 TRI-P-09-DMP-W-K
15-way 6355-0037-02 TRI-P-15-DMP-K 15-way 6355-8037-02 TRI-P-15-DMP-W-K
25-way 6355-0037-03 TRI-P-25-DMP-K 25-way 6355-8037-03 TRI-P-25-DMP-W-K
37-way 6355-0037-04 TRI-P-37-DMP-K 37-way 6355-8037-04 TRI-P-37-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

226

Plastic Hoods TRI-P+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Side / Top / Side
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm
Colour: Black

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size TRI-P Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes 9-15-25-37 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Supplied with 2 Blanking Plates and 2 Strain Relief clamps. 37-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0036-11 TRI-P-09-DBS-K 9-way 6355-8036-11 TRI-P-09-DBS-W-K
15-way 6355-0036-12 TRI-P-15-DBS-K 15-way 6355-8036-12 TRI-P-15-DBS-W-K
25-way 6355-0036-13 TRI-P-25-DBS-K 25-way 6355-8036-13 TRI-P-25-DBS-W-K
37-way 6355-0036-14 TRI-P-37-DBS-K 37-way 6355-8036-14 TRI-P-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0037-11 TRI-P-09-DMS-K 9-way 6355-8037-11 TRI-P-09-DMS-W-K
15-way 6355-0037-12 TRI-P-15-DMS-K 15-way 6355-8037-12 TRI-P-15-DMS-W-K
25-way 6355-0037-13 TRI-P-25-DMS-K 25-way 6355-8037-13 TRI-P-25-DMS-W-K
37-way 6355-0037-14 TRI-P-37-DMS-K 37-way 6355-8037-14 TRI-P-37-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 227

Plastic Hoods TRI-P+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
-55°C to +110°C
Material: Side / Top / Side
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm
Colour: Black

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size TRI-P Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes HD15-26-44-62 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Supplied with 2 Blanking Plates and 2 Strain Relief clamps. 37-way

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0068-01 TRI-P-09-HDP15-K HD 15 6355-0068-11 TRI-P-09-HDS15-K
HD 26 6355-0068-02 TRI-P-09-HDP26-K HD 26 6355-0068-12 TRI-P-15-HDS26-K
HD 44 6355-0068-03 TRI-P-09-HDP44-K HD 44 6355-0068-13 TRI-P-25-HDS44-K
HD 62 6355-0068-04 TRI-P-09-HDP62-K HD 62 6355-0068-14 TRI-P-37-HDS62-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

228

Metalized Plastic Hoods DPPK-M+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +105°C
Plating: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DPPK-M Dim A Dim B Dim C
9-way 32,5 38,0 15,0
● Available in sizes 9, 15, 25 and 37-way 41,0 38,0 15,0
● Suitable for any common Sub-D Connector 15-way 54,5 40,0 15,0
● Quick-Snap locking system 25-way 71,0 40,0 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0004-01 DPPK09-M-DBP-K 9-way 6355-8004-01 DPPK09-M-DBP-W-K
15-way 6355-0004-02 DPPK15-M-DBP-K 15-way 6355-8004-02 DPPK15-M-DBP-W-K
25-way 6355-0004-03 DPPK25-M-DBP-K 25-way 6355-8004-03 DPPK25-M-DBP-W-K
37-way 6355-0004-04 DPPK37-M-DBP-K 37-way 6355-8004-04 DPPK37-M-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0004-21 DPPK09-M-DMP-K 9-way 6355-8004-21 DPPK09-M-DMP-W-K
15-way 6355-0004-22 DPPK15-M-DMP-K 15-way 6355-8004-22 DPPK15-M-DMP-W-K
25-way 6355-0004-23 DPPK25-M-DMP-K 25-way 6355-8004-23 DPPK25-M-DMP-W-K
37-way 6355-0004-24 DPPK37-M-DMP-K 37-way 6355-8004-24 DPPK37-M-DMP-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 229

Metalized Plastic Hoods DPPK-M+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood:

Material: UL Recognised Plastic Material

Plating: Nickel over Copper

Operating Temperature: -55°C to +105°C

Cable Entry: Top

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size DPPK-M Dim A Dim B Dim C
9-way 32,5 38,0 15,0
● Available in sizes 9, 15, 25 and 37-way 41,0 38,0 15,0
● Suitable for any common Sub-D Connector 15-way 54,5 40,0 15,0
● Quick-Snap locking system 25-way 71,0 40,0 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0004-11 DPPK09-M-DBS-K 9-way 6355-8004-11 DPPK09-M-DBS-W-K
15-way 6355-0004-12 DPPK15-M-DBS-K 15-way 6355-8004-12 DPPK15-M-DBS-W-K
25-way 6355-0004-13 DPPK25-M-DBS-K 25-way 6355-8004-13 DPPK25-M-DBS-W-K
37-way 6355-0004-14 DPPK37-M-DBS-K 37-way 6355-8004-14 DPPK37-M-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0004-31 DPPK09-M-DMS-K 9-way 6355-8004-31 DPPK09-M-DMS-W-K
15-way 6355-0004-32 DPPK15-M-DMS-K 15-way 6355-8004-32 DPPK15-M-DMS-W-K
25-way 6355-0004-33 DPPK25-M-DMS-K 25-way 6355-8004-33 DPPK25-M-DMS-W-K
37-way 6355-0004-34 DPPK37-M-DMS-K 37-way 6355-8004-34 DPPK37-M-DMS-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

230

Metalized Plastic Hoods DPPK-M+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +105°C
Plating: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size DPPK-M Dim A Dim B Dim C
9-way 32,5 38,0 15,0
● Available in sizes HD15-26-44-62 41,0 38,0 15,0
● Suitable for any common Sub-D Connector 15-way 54,5 40,0 15,0
● Quick-Snap locking system 25-way 71,0 40,0 15,0
● Re-openable 37-way
● Recyclable

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0014-01 DPPK09-M-HDP15-K HD 15 6355-0014-11 DPPK09-M-HDS15-K
HD 26 6355-0014-02 DPPK15-M-HDP26-K HD 26 6355-0014-12 DPPK15-M-HDS26-K
HD 44 6355-0014-03 DPPK25-M-HDP44-K HD 40 6355-0014-13 DPPK25-M-HDS44-K
HD 62 6355-0014-04 DPPK37-M-HDP62-K HD 62 6355-0014-14 DPPK37-M-HDS62-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 231

Metalized Plastic Hoods DPPK-M+D-Sub Crimp

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +105°C
Plating: Top
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 11,5mm
Thumbscrews:
Cable O.D:

D-Sub Crimp: PBT, Black, UL94 V-0
Stamped Steel, Tin Plated
Insulator: Copper Alloy
Shell: 200 inserts min
Contact pins: Hard Gold over Nickel
Machined pins Class 2: -55°C to +125°C
Contacts Plating: 1000V
Operating Temperature: <5GΩ
Test voltage: AWG 24-20
Insulator resistance: 0.2 - 0.6mm²
Crimp Area (AWG):

Features: Size DPPK-M Dim A Dim B Dim C
9-way 32,5 38,0 15,0
● Available in sizes 9, 15, 25 and 37-way 41,0 38,0 15,0
● Suitable for any common Sub-D Connector 15-way 54,5 40,0 15,0
● Quick-Snap locking system 25-way 71,0 40,0 15,0
● Supplied No. of pins = size of connector 37-way
● Re-openable
● Recyclable

Ordering information: D-Sub Connector Kits (200 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

9-way 6355-0052-01 DPPK09-M-DBCP-K 9-way 6355-0052-11 DPPK09-M-DBCS-K
15-way 6355-0052-02 DPPK15-M-DBCP-K 15-way 6355-0052-12 DPPK15-M-DBCS-K
25-way 6355-0052-03 DPPK25-M-DBCP-K 25-way 6355-0052-13 DPPK25-M-DBCS-K
37-way 6355-0052-04 DPPK37-M-DBCP-K 37-way 6355-0052-14 DPPK37-M-DBCS-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

232

Metalized Plastic Hoods DPPK-M+D-Sub Solder Cup + Cutter

TECHNICAL SPECIFICATIONS

D-Sub Hood:

Material: UL Recognised Plastic Material

Plating: Nickel over Copper

Operating Temperature: -55°C to +105°C

Cable Entry: Top

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm

D-Sub + Cutter: PBT, Black, UL94 V-0
Steel, Tin Plated
Insulator: Copper Alloy
Shell: Class 3, 100 inserts min.
Contact pins: Selective Gold over Nickel

Stamped & Formed Pins -55°C to +105°C
Contact Plating: 1000V for 1 minute
1000MΩ min.
Operating Temperature:
Withstanding voltage:
Insulator resistance:

Features: Size DPPK-M Dim A Dim B Dim C
9-way 32,5 38,0 15,0
● Available in sizes HD15-26-44-62 41,0 38,0 15,0
● Cutter + Hood + Connector (Kit) 15-way 54,5 40,0 15,0
● Quick-Snap locking system 25-way 71,0 40,0 15,0
● Re-openable 37-way
● Company logo available upon request
● Recyclable

Ordering information: D-Sub Cutter + Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

9-way 6365-0105-01 DPPK-M-09-DBP-CK 9-way 6365-0105-11 DPPK-M-09-DBS-CK
15-way 6365-0105-02 DPPK-M-15-DBP-CK 15-way 6365-0105-12 DPPK-M-15-DBS-CK
25-way 6365-0105-03 DPPK-M-25-DBP-CK 25-way 6365-0105-13 DPPK-M-25-DBS-CK
37-way 6365-0105-04 DPPK-M-37-DBP-CK 37-way 6365-0105-14 DPPK-M-37-DBS-CK

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 233

Full Metal Hoods DSSK-M + D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS
D-Sub Hood:

Material: Zinc, Nickel Plated

Operating Temperature: -45°C to + 105°C
Cable Entry: Top and Side Entry

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: 9-Way: Up to 9,5mm
15-Way: Up to 9,5mm
25-Way: Up to 9,5mm

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DSSK-M Dim A Dim B Dim C
9-way 31,5 40,0 15,0
● Available in sizes 9-15-25 40,0 40,0 15,0
● Excellent EMI Shielding 15-way 53,5 43,0 15,0
● Re-openable 25-way
● Spring-Clip mounted Jackscrews

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0084-01 DSSK09-M-DBP-K 9-way 6355-8084-01 DSSK09-M-DBP-W-K
15-way 6355-0084-02 DSSK15-M-DBP-K 15-way 6355-8084-02 DSSK15-M-DBP-W-K
25-way 6355-0084-03 DSSK25-M-DBP-K 25-way 6355-8084-03 DSSK25-M-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0084-21 DSSK09-M-DMP-K 9-way 6355-8084-21 DSSK09-M-DMP-W-K
15-way 6355-0084-22 DSSK15-M-DMP-K 15-way 6355-8084-22 DSSK15-M-DMP-W-K
25-way 6355-0084-23 DSSK25-M-DMP-K 25-way 6355-8084-23 DSSK25-M-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

234

Full Metal Hoods DSSK-M + D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS
D-Sub Hood:

Material: Zinc, Nickel Plated

Operating Temperature: -45°C to + 105°C
Cable Entry: Top and Side Entry

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: 9-Way: Up to 9,5mm
15-Way: Up to 9,5mm
25-Way: Up to 9,5mm

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.
Contact Plating: Selective Gold over Nickel
Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.

Features: Size DSSK-M Dim A Dim B Dim C
9-way 31,5 40,0 15,0
● Available in sizes 9-15-25 40,0 40,0 15,0
● Excellent EMI Shielding 15-way 53,5 43,0 15,0
● Re-openable 25-way
● Spring-Clip mounted Jackscrews

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0084-11 DSSK09-M-DBS-K 9-way 6355-8084-11 DSSK09-M-DBS-W-K
15-way 6355-0084-12 DSSK15-M-DBS-K 15-way 6355-8084-12 DSSK15-M-DBS-W-K
25-way 6355-0084-13 DSSK25-M-DBS-K 25-way 6355-8084-13 DSSK25-M-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0084-31 DSSK09-M-DMS-K 9-way 6355-8084-31 DSSK09-M-DMS-W-K
15-way 6355-0084-32 DSSK15-M-DMS-K 15-way 6355-8084-32 DSSK15-M-DMS-W-K
25-way 6355-0084-33 DSSK25-M-DMS-K 25-way 6355-8084-33 DSSK25-M-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 235

Full Metal Hoods DSSK-M + High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS
D-Sub Hood:

Material: Zinc, Nickel Plated

Operating Temperature: -45°C to + 105°C
Cable Entry: Top and Side Entry

Thumbscrews: UNC 4-40 (Standard)

Cable O.D: 9-Way: Up to 9,5mm
15-Way: Up to 9,5mm
25-Way: Up to 9,5mm

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size DSSK-M Dim A Dim B Dim C
9-way 31,5 40,0 15,0
● Available in sizes HD15-26-44 40,0 40,0 15,0
● Excellent EMI Shielding 15-way 53,5 43,0 15,0
● Re-openable 25-way
● Spring-Clip mounted Jackscrews

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

9-way 6355-0085-01 DSSK09-M-HDP15-K 9-way 6355-0085-11 DSSK09-M-HDS15-K
15-way 6355-0085-02 DSSK15-M-HDP36-K 15-way 6355-0085-12 DSSK15-M-HDS36-K
25-way 6355-0085-03 DSSK25-M-HDP44-K 25-way 6355-0085-13 DSSK25-M-HDS44-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

236

Metalized Plastic Hoods DTPK-M+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Top Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DTPK-M Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes 9-15-25-37 39,5 41,5 15,0
● Suitable for any common Sub-D Connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0030-01 DTPK-M-09-DBP-K 9-way 6355-8030-01 DTPK-M-09-DBP-W-K
15-way 6355-0030-02 DTPK-M-15-DBP-K 15-way 6355-8030-02 DTPK-M-15-DBP-W-K
25-way 6355-0030-03 DTPK-M-25-DBP-K 25-way 6355-8030-03 DTPK-M-25-DBP-W-K
37-way 6355-0030-04 DTPK-M-37-DBP-K 37-way 6355-8030-04 DTPK-M-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0031-01 DTPK-M-09-DMP-K 9-way 6355-8031-01 DTPK-M-09-DMP-W-K
15-way 6355-0031-02 DTPK-M-15-DMP-K 15-way 6355-8031-02 DTPK-M-15-DMP-W-K
25-way 6355-0031-03 DTPK-M-25-DMP-K 25-way 6355-8031-03 DTPK-M-25-DMP-W-K
37-way 6355-0031-04 DTPK-M-37-DMP-K 37-way 6355-8031-04 DTPK-M-37-DMP-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 237

Metalized Plastic Hoods DTPK-M+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Top Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size DTPK-M Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes 9-15-25-37 39,5 41,5 15,0
● Suitable for any common Sub-D Connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0030-11 DTPK-M-09-DBS-K 9-way 6355-8030-11 DTPK-M-09-DBS-W-K
15-way 6355-0030-12 DTPK-M-15-DBS-K 15-way 6355-8030-12 DTPK-M-15-DBS-W-K
25-way 6355-0030-13 DTPK-M-25-DBS-K 25-way 6355-8030-13 DTPK-M-25-DBS-W-K
37-way 6355-0030-14 DTPK-M-37-DBS-K 37-way 6355-8030-14 DTPK-M-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0031-11 DTPK-M-09-DMS-K 9-way 6355-8031-11 DTPK-M-09-DMS-W-K
15-way 6355-0031-12 DTPK-M-15-DMS-K 15-way 6355-8031-12 DTPK-M-15-DMS-W-K
25-way 6355-0031-13 DTPK-M-25-DMS-K 25-way 6355-8031-13 DTPK-M-25-DMS-W-K
37-way 6355-0031-14 DTPK-M-37-DMS-K 37-way 6355-8031-14 DTPK-M-37-DMS-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

238

Metalized Plastic Hoods DTPK-M+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material

Material:

Plating: Nickel over Copper
Operating Temperature: -55°C to +110°C

Cable Entry: Top Entry
Thumbscrews: UNC 4-40 (Standard)

Cable O.D: Up to 11,5mm

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size DTPK-M Dim A Dim B Dim C
9-way 31,2 39,9 15,0
● Available in sizes HD15-26-44-62 39,5 41,5 15,0
● Suitable for any common Sub-D Connector 15-way 53,4 48,6 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 53,6 15,0
● Re-openable 37-way
● Recyclable

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0056-01 DTPK-M-09-HDP15-K HD 15 6355-0056-11 DTPK-M-09-HDS15-K
HD 26 6355-0056-02 DTPK-M-15-HDP26-K HD 26 6355-0056-12 DTPK-M-15-HDS26-K
HD 44 6355-0056-03 DTPK-M-25-HDP44-K HD 44 6355-0056-13 DTPK-M-25-HDS44-K
HD 62 6355-0056-04 DTPK-M-37-HDP62-K HD 62 6355-0056-14 DTPK-M-37-HDS62-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 239

Metalized Plastic Hoods D45PK-M+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size D45PK-M Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes 9-15-25-37 39,5 40,3 15,0
● Suitable for any common Sub-D Connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0009-01 D45PK-M-09-DBP-K 9-way 6355-8009-01 D45PK-M-09-DBP-W-K
15-way 6355-0009-02 D45PK-M-15-DBP-K 15-way 6355-8009-02 D45PK-M-15-DBP-W-K
25-way 6355-0009-03 D45PK-M-25-DBP-K 25-way 6355-8009-03 D45PK-M-25-DBP-W-K
37-way 6355-0009-04 D45PK-M-37-DBP-K 37-way 6355-8009-04 D45PK-M-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0010-01 D45PK-M-09-DMP-K 9-way 6355-8010-01 D45PK-M-09-DMP-W-K
15-way 6355-0010-02 D45PK-M-15-DMP-K 15-way 6355-8010-02 D45PK-M-15-DMP-W-K
25-way 6355-0010-03 D45PK-M-25-DMP-K 25-way 6355-8010-03 D45PK-M-25-DMP-W-K
37-way 6355-0010-04 D45PK-M-37-DMP-K 37-way 6355-8010-04 D45PK-M-37-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

240

Metalized Plastic Hoods D45PK-M+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min.

Features: Size D45PK-M Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes 9-15-25-37 39,5 40,3 15,0
● Suitable for any common Sub-D Connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way
● Recyclable

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0009-11 D45PK-M-09-DBS-K 9-way 6355-8009-11 D45PK-M-09-DBS-W-K
15-way 6355-0009-12 D45PK-M-15-DBS-K 15-way 6355-8009-12 D45PK-M-15-DBS-W-K
25-way 6355-0009-13 D45PK-M-25-DBS-K 25-way 6355-8009-13 D45PK-M-25-DBS-W-K
37-way 6355-0009-14 D45PK-M-37-DBS-K 37-way 6355-8009-14 D45PK-M-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0010-11 D45PK-M-09-DMS-K 9-way 6355-8010-11 D45PK-M-09-DMS-W-K
15-way 6355-0010-12 D45PK-M-15-DMS-K 15-way 6355-8010-12 D45PK-M-15-DMS-W-K
25-way 6355-0010-13 D45PK-M-25-DMS-K 25-way 6355-8010-13 D45PK-M-25-DMS-W-K
37-way 6355-0010-14 D45PK-M-37-DMS-K 37-way 6355-8010-14 D45PK-M-37-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 241

Metalized Plastic Hoods D45PK-M+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL 94 V-0 Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 11,5mm

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size D45PK-M Dim A Dim B Dim C
9-way 31,0 36,3 15,0
● Available in sizes HD15-26-44-62 39,5 40,3 15,0
● Suitable for any common Sub-D Connector 15-way 53,2 40,3 15,0
● Strain relief inserts ensure a secure termination 25-way 69,7 40,3 15,0
● Re-openable 37-way
● Recyclable

Ordering information: Class 3 D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

15-way 6355-0057-01 D45PK-M-09-HDP15-K 15-way 6355-0057-11 D45PK-M-09-HDS15-K
26-way 6355-0057-02 D45PK-M-15-HDP26-K 26-way 6355-0057-12 D45PK-M-15-HDS26-K
44-way 6355-0057-03 D45PK-M-25-HDP44-K 44-way 6355-0057-13 D45PK-M-25-HDS44-K
62-way 6355-0057-04 D45PK-M-37-HDP62-K 62-way 6355-0057-14 D45PK-M-37-HDS62-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

242

Metalized Plastic Hoods TRI-M+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side / Top / Side
Operating Temperature: UNC 4-40 (Standard)
Cable Entry:
Thumbscrews:

Cable O.D: Up to 13mm

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Features: Size TRI-M Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes 9-15-25-37 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Hood is supplied with 2 Blanking Plates and 2 Strain 37-way

Relief clamps.

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0038-01 TRI-M-09-DBP-K 9-way 6355-8038-01 TRI-M-09-DBP-W-K
15-way 6355-0038-02 TRI-M-15-DBP-K 15-way 6355-8038-02 TRI-M-15-DBP-W-K
25-way 6355-0038-03 TRI-M-25-DBP-K 25-way 6355-8038-03 TRI-M-25-DBP-W-K
37-way 6355-0038-04 TRI-M-37-DBP-K 37-way 6355-8038-04 TRI-M-37-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0039-01 TRI-M-09-DMP-K 9-way 6355-8039-01 TRI-M-09-DMP-W-K
15-way 6355-0039-02 TRI-M-15-DMP-K 15-way 6355-8039-02 TRI-M-15-DMP-W-K
25-way 6355-0039-03 TRI-M-25-DMP-K 25-way 6355-8039-03 TRI-M-25-DMP-W-K
37-way 6355-0039-04 TRI-M-37-DMP-K 37-way 6355-8039-04 TRI-M-37-DMP-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 243

Metalized Plastic Hoods TRI-M+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS
D-Sub Hood:

Material: UL Recognised Plastic Material
Plating: Nickel over Copper
Operating Temperature: -55°C to +110°C
Cable Entry: Side / Top / Side
Thumbscrews: UNC 4-40 (Standard)
Cable O.D: Up to 13mm

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Insulator resistance: 1000MΩ min

Features: Size TRI-M Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes 9-15-25-37 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Hood is supplied with 2 Blanking Plates and 2 Strain 37-way

Relief clamps.

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0038-11 TRI-M-09-DBS-K 9-way 6355-8038-11 TRI-M-09-DBS-W-K
15-way 6355-0038-12 TRI-M-15-DBS-K 15-way 6355-8038-12 TRI-M-15-DBS-W-K
25-way 6355-0038-13 TRI-M-25-DBS-K 25-way 6355-8038-13 TRI-M-25-DBS-W-K
37-way 6355-0038-14 TRI-M-37-DBS-K 37-way 6355-8038-14 TRI-M-37-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0039-11 TRI-M-09-DMS-K 9-way 6355-8039-11 TRI-M-09-DMS-W-K
15-way 6355-0039-12 TRI-M-15-DMS-K 15-way 6355-8039-12 TRI-M-15-DMS-W-K
25-way 6355-0039-13 TRI-M-25-DMS-K 25-way 6355-8039-13 TRI-M-25-DMS-W-K
37-way 6355-0039-14 TRI-M-37-DMS-K 37-way 6355-8039-14 TRI-M-37-DMS-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

244

Metalized Plastic Hoods TRI-M+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS
D-Sub Hood:

Material: UL Recognised Plastic Material
Plating: Nickel over Copper
Operating Temperature: -55°C to +110°C
Cable Entry: Side / Top / Side
Thumbscrews: UNC 4-40 (Standard)
Cable O.D: Up to 13mm

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Features: Size TRI-M Dim A Dim B Dim C
9-way 31,0 45,2 15,0
● Available in sizes HD15-26-44-62 40,3 45,2 15,0
● All sizes feature 3-Way Entry solution 15-way 53,5 45,2 15,0
● Re-openable 25-way 70,0 45,2 15,0
● Hood is supplied with 2 Blanking Plates and 2 Strain 37-way

Relief clamps.

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0058-01 TRI-M-09-HDP15-K HD 15 6355-0058-11 TRI-M-09-HDS15-K
HD 26 6355-0058-02 TRI-M-15-HDP26-K HD 26 6355-0058-12 TRI-M-15-HDS26-K
HD 44 6355-0058-03 TRI-M-25-HDP44-K HD 44 6355-0058-13 TRI-M-25-HDS44-K
HD 62 6355-0058-04 TRI-M-37-HDP62-K HD 62 6355-0058-14 TRI-M-37-HDS62-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 245

Metalized Plastic Hoods DTNT+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Top Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 13mm
Thumbscrews:
Cable O.D:

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Insulator resistance: 1000MΩ min

Compression Inserts - Inner Diameters:

AB C D E F

Size A B C D E F Size DTNT Dim A Dim B Dim C
6,50 5,30 - 9-way 31,5 43,5 15,8
9/15 8,10 8,00 7,25 7,60 5,80 - 39,9 43,5 15,8
15-way 54,0 47,5 15,8
25 11,40 10,40 9,40 25-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0070-01 DTNT09-M-DBP-K 9-way 6355-8070-01 DTNT09-M-DBP-W-K
15-way 6355-0070-02 DTNT15-M-DBP-K 15-way 6355-8070-02 DTNT15-M-DBP-W-K
25-way 6355-0070-03 DTNT25-M-DBP-K 25-way 6355-8070-03 DTNT25-M-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0070-11 DTNT09-M-DMP-K 9-way 6355-8070-11 DTNT09-M-DMP-W-K
15-way 6355-0070-12 DTNT15-M-DMP-K 15-way 6355-8070-12 DTNT15-M-DMP-W-K
25-way 6355-0070-13 DTNT25-M-DMP-K 25-way 6355-8070-13 DTNT25-M-DMP-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

246

Metalized Plastic Hoods DTNT+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Top Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 13mm
Thumbscrews:
Cable O.D:

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Insulator resistance: 1000MΩ min

Compression Inserts - Inner Diameters:

AB C D E F

Size A B C DE F Size DTNT Dim A Dim B Dim C
6,50 5,30 - 9-way 31,5 43,5 15,8
9/15 8,10 8,00 7,25 7,60 5,80 - 39,9 43,5 15,8
15-way 54,0 47,5 15,8
25 11,40 10,40 9,40 25-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0070-21 DTNT09-M-DBS-K 9-way 6355-8070-21 DTNT09-M-DBS-W-K
15-way 6355-0070-22 DTNT15-M-DBS-K 15-way 6355-8070-22 DTNT15-M-DBS-W-K
25-way 6355-0070-23 DTNT25-M-DBS-K 25-way 6355-8070-23 DTNT25-M-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0070-31 DTNT09-M-DMS-K 9-way 6355-8070-31 DTNT09-M-DMS-W-K
15-way 6355-0070-32 DTNT15-M-DMS-K 15-way 6355-8070-32 DTNT15-M-DMS-W-K
25-way 6355-0070-33 DTNT25-M-DMS-K 25-way 6355-8070-33 DTNT25-M-DMS-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 247

Metalized Plastic Hoods DTNT+High Density D-Sub Solder Cup

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Top Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 13mm
Thumbscrews:
Cable O.D:

D-Sub High Density:

Insulator: PBT, Black, UL94 V-0

Shell: Stamped Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed pins: 100 inserts min

Contacts Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 500V for 1 minute

Insulator resistance: 500MΩ min

Compression Inserts - Inner Diameters:

AB C D E F

Size A B C D E F Size DTNT Dim A Dim B Dim C
6,50 5,30 - 9-way 31,5 43,5 15,8
9/15 8,10 8,00 7,25 7,60 5,80 - 39,9 43,5 15,8
15-way 54,0 47,5 15,8
25 11,40 10,40 9,40 25-way

Ordering information: D-Sub Connector Kits (100 inserts min.)

Size: P/N - Kitted: Product Code - MALE Conn. Kit Size: P/N - Kitted: Product Code - FEMALE Conn. Kit

HD 15 6355-0071-01 DTNT09-M-HDP15-K HD 15 6355-0071-11 DTNT09-M-HDS15-K
HD 26 6355-0071-02 DTNT15-M-HDP26-K HD 26 6355-0071-12 DTNT15-M-HDS26-K
HD 44 6355-0071-03 DTNT25-M-HDP44-K HD 44 6355-0071-13 DTNT25-M-HDS44-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

248

Metalized Plastic Hoods D45NT+D-Sub Solder Cup Male

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 13mm
Thumbscrews:
Cable O.D:

Male D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Insulator resistance: 1000MΩ min

Compression Inserts - Inner Diameters:

AB C D E F

Size A B C DE F Size D45NT Dim A Dim B Dim C
6,50 5,30 - 9-way 31,5 43,5 15,8
9/15 8,10 8,00 7,25 7,60 5,80 - 39,9 43,5 15,8
15-way 54,0 47,5 15,8
25 11,40 10,40 9,40 25-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0072-01 D45NT09-M-DBP-K 9-way 6355-8072-01 D45NT09-M-DBP-W-K
15-way 6355-0072-02 D45NT15-M-DBP-K 15-way 6355-8072-02 D45NT15-M-DBP-W-K
25-way 6355-0072-03 D45NT25-M-DBP-K 25-way 6355-8072-03 D45NT25-M-DBP-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0072-11 D45NT09-M-DMP-K 9-way 6355-8072-11 D45NT09-M-DMP-W-K
15-way 6355-0072-12 D45NT15-M-DMP-K 15-way 6355-8072-12 D45NT15-M-DMP-W-K
25-way 6355-0072-13 D45NT25-M-DMP-K 25-way 6355-8072-13 D45NT25-M-DMP-W-K

Encitech AB Tel: +46-(0)35-15 13 90 www.encitech.com
Rörkullsvägen 4 e-mail: [email protected]
SE-302 41 HALMSTAD, Sweden 249

Metalized Plastic Hoods D45NT+D-Sub Solder Cup Female

TECHNICAL SPECIFICATIONS

D-Sub Hood: UL Recognised Plastic Material
Nickel over Copper
Material: -55°C to +110°C
Plating: Side Entry
Operating Temperature: UNC 4-40 (Standard)
Cable Entry: Up to 13mm
Thumbscrews:
Cable O.D:

Female D-Sub Solder Cup:

Insulator: PBT, Black, UL94 V-0

Shell: Steel, Tin Plated

Contact pins: Copper Alloy

Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.

Contact Plating: Selective Gold over Nickel

Operating Temperature: -55°C to +105°C

Withstanding voltage: 1000V for 1 minute

Insulator resistance: 1000MΩ min

Insulator resistance: 1000MΩ min

Compression Inserts - Inner Diameters:

AB C D E F

Size A B C D E F Size D45NT Dim A Dim B Dim C
6,50 5,30 - 9-way 31,5 43,5 15,8
9/15 8,10 8,00 7,25 7,60 5,80 - 39,9 43,5 15,8
15-way 54,0 47,5 15,8
25 11,40 10,40 9,40 25-way

Ordering information - Black Insulator: Ordering information - White Insulator:

Size: P/N - Kitted: Class 3 - 100 inserts min. Size: P/N - Kitted: Class 3 - 100 inserts min.

9-way 6355-0072-21 D45NT09-M-DBS-K 9-way 6355-8072-21 D45NT09-M-DBS-W-K
15-way 6355-0072-22 D45NT15-M-DBS-K 15-way 6355-8072-22 D45NT15-M-DBS-W-K
25-way 6355-0072-23 D45NT25-M-DBS-K 25-way 6355-8072-23 D45NT25-M-DBS-W-K

Size: P/N - Kitted: Class 1 - 500 inserts min. Size: P/N - Kitted: Class 1 - 500 inserts min.

9-way 6355-0072-31 D45NT09-M-DMS-K 9-way 6355-8072-31 D45NT09-M-DMS-W-K
15-way 6355-0072-32 D45NT15-M-DMS-K 15-way 6355-8072-32 D45NT15-M-DMS-W-K
25-way 6355-0072-33 D45NT25-M-DMS-K 25-way 6355-8072-33 D45NT25-M-DMS-W-K

Encitech AB
Rörkullsvägen 4

www.encitech.comSE-302 41 HALMSTAD, Sweden
Tel: +46-(0)35-15 13 90
e-mail: [email protected]

250