Seagate Mrine Brochure 2018 (Final)

Heavy-Duty Bilge Pumps 1700

An automatic-switch bilge pump is a requirement for any vessels 20’ and over with sleeping
accommodations, but is a great convenience for any size boat. The Sahara has everything
contained in one compact yet durable package – pump, wire seals, strainer, and mercury-free
switch – and installs quickly and easily in tight spaces. Pumps include 36” lengths of 16-gauge
caulked and tinned copper wire.S1100 is our most powerful and efficient automatic pump. High
capacity for larger boats and yachts. 1100 GPH* at open flow, 973 GPH* at 3.3’ head. 1-1/8”
hose outlet.*Listed GPH is measured at design voltage of 13.6 VDC.

Model No. Rated Voltage Wire/ Connector Bulk Packaging
HD1700 12-Volt, CE rated 36" Wire 4730-1

4730-1 Europump II automatic pump 12 V 128 l/min
1612232
Manufactured in compliance with Law 94/25 and the Directive ISO 8846. The pump activates
when the bilge water level is 7 cm and stops when water has been totally drained. CE certified
by RINA in compliance with Law 94/25, directive ISO 28846/28849.

Part NO 0SC-1612232
V 12

Flow 128 l/min
11
Consumption A 4m

Head 150x150x100
Size mm 29 mm
Mouth Ø

Electric Bilge Pump Manual

CE certified by RINA in compliance with Law 94/25, directive ISO 8846.

1612214

Part No. Europump V Consumption A Max prevalence Pipe Ø
OSC-1612205 model(Gph) 19 mm
OSC-1612206 12 5.5 4.50 m 29 mm
OSC-1612210 800 29 mm
OSC-1612214 12 5.5 4.50 m 29 mm
1000
12 8 3.10 m 48
1500
12 11 3.50 m
2000

WHALE C automatic electronic Automatic electronic switch for
switch for bilge pumps any bilge pump

It uses the MIRUS patented field sensor Fast installation in any point of the bilge.
technology that controls 12 or 24 volt DC bilge Petrol-, oil- and diesel-resistant.
pumps up to 20 A current draw. - No moving
Part No. internal parts, no wear and no malfunctioning. Part No.
1654890 - Completely sealed, maintenance required. - 1660900
Solvent- and fuel-resistant polymer body. -
Mercury- and polluting-agent free.

Automatic Bilge Switchs - S3 Series

Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump
activation and has been engineered to operate in any bilge water mixture consistently without failure. Your
pump won’t be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water,
chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely
protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the
floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components
or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving
parts that can jam up, break or wear out over time.

Description Max. Pump Amp Draw Rated Voltage Wire Bulk Packaging
Switch, White 15A 12-volt 36" 4801-1

35A 40A

Rule-A-Matic® Float Switch Rule-A-Matic® Plus™ Float Switch

Year after year, the Rule-A-Matic has been the switch of choice for Sleek and rugged, the Rule-A-Matic Plus float switch has a strong,
boaters the world over. Our latest design now includes a removable fully integrated, impact resistant cover that protects against debris
base for easy cleaning and servicing, a mercury free snap switch and jamming. It features 14 gauge highly abrasive resistant marine
tested to over one million cycles and marine grade "blocked" wire. grade wire and a built-in test feature. Designed for pumps drawing
Designed for pumps drawing up to 14 Amps. Model 35A and 35FA up to 20 Amps. Both the 40A and 40FA now include a 2 year warran-
now includes a 2 year warranty.
40A Rule-A-Matic® Plus™ Float Switch
35A Rule-A-Matic® Float Switch
Dimensions (L x W x H) 4 1/2 x 1 1/2 x 2 (inches) Voltage 12, 24 or 32 (Vdc)

114 x 38 x 51 (mm) Amp Draw 20 (amp)

Dimensions (L x W x H) 4 7/8 x 2 1/2 x 2 3/4 (inches)

49

01 Series SEAFLO Bilge Pump Float Switch

01 Series SEAFLO Bilge Pump Float Switch

Flawless operation! Year after year, SEAFLO 12-24-32-VDC Bilge Pump Float Switches are the Switch of
choice for selective boaters all over the world. Featuring quality design and construction to offer reliable
engagement of your bilge pump. For pumps drawing up to 20 amps. SEAFLO float switches are designed for
use with fresh water and salt water only.

SFBS-20-01 Part No. Max Amps Max Amps Wire Length Wire Gauge Size
SFBS-18-02 SFBS-20-01 12 Volts 20A 24 Volts 10A 1M 18AWG

1660350 02 Series SEAFLO Bilge Pump Float Switch
1660300
02 Series SEAFLO Bilge Pump Float Switch

Flawless operation! Year after year, SEAFLO 12-24-32-VDC Bilge Pump Float Switches are the Switch of
choice for selective boaters all over the world. Featuring quality design and construction to offer reliable
engagement of your bilge pump. For pumps drawing up to 20 amps. SEAFLO float switches are designed for
use with fresh water and salt water only.

Part No. Max Amps Max Amps Wire Length Wire Gauge Size
SFBS-18-02 12 Volts 18A 24 Volts 8A 1M 16AWG

03 Series SEAFLO Bilge Pump Float Switch

Flawless operation! Year after year, SEAFLO Bilge Pump Float Switches are mercury free, and to be the
Switch of choice for selective boaters all over the world. Featuring quality design and construction to offer
reliable engagement of your bilge pump. For pumps drawing up to 25 amps. SEAFLO float switches are
designed for use with fresh water and salt water only.

Model No. Max Amps 12Volts Filter Housing Wire Lead Wire Gauge Size
14 AWG
SFBS-25-03B 25 A YES 1M 16 AWG
SFBS-12-04B 12 A YES 1M

Automatic switch for bilge pumps

20-amp flow. Technopolymer body. Removable for cleaning.

VOLTAGE 12/24 V

Max current draw A - 12V 20A
Max current draw A - 24V 10A

Eco-friendly automatic switch for any bilge pump

For bilge pumps. New extra-flat version. EC certificate in compliance to standard 94/25 ISO 28846.

Part No. Voltage Max A
OSC-1660300 Universal 14

50

SHOWER & SHOWER HEADS

Shower box with Mizar wall push-button shower. Spare PVC wired hose.

OSC-1524500 OSC-1524202 OSC-1524902 OSC-1520001
Terminal joints
Made of chromed brass, fitted with flush-mount UVresistant ASA Part No. Length 1/2" F + 3/8" F
bracket, supplied with white PVC watertight cover. 45-mm OSC-1520000 2,5 m 1/2" F + 3/8" F
internal overhang. OSC-1520001 4m
Name
Part No. Recess Max outer size Spare push-button shower Model Mizar
OSC-1524500 54 mm 84 mm Part No. Switch

OSC-1524202

New Edge shower box with Boris shower. Classic EVO wall shower box with Mizar push-button shower.

OSC-1524806 OSC-1524800

Plastic shower fitted with chromed head, UV-resistant ASA housing. 1525003

Part No. Hatch Finish Hose m Chromed-brass shower, UV-resistant ASA shower housing.
OSC-1524800 White 2,5
OSC-1524806 2,5 Part No. Hatch Finish Hose m
Chromed OSC-1525003 White 2,5

Utility handheld shower head. New Edge shower box with Mizar push-button shower.

Made of chromed brass, fitted with flush-mount UV-resistant ASA OSC-1524300
bracket, supplied with white PVC watertight cover. 45-mm
internal overhang. Plastic shower fitted with chromed head, UV-resistant ASA housing.

Part No. Recess Max outer size Part No. Hatch Finish Hose m
OSC-1524500 54 mm 84 mm OSC-1524300 White 2,5

Classic EVO wall shower box with Mizar push-button shower. New Edge shower box with Niagara shower.

Chromed-brass shower, UV-resistant ASA shower housing. OSC-1516001
Chromed ABS shower, UV-resistant ASA housing.

Part No. Hatch Finish Hose m Part No. Hatch Finish Hose m
OSC-1525009 Chromed 2,5 OSC-1516001 White 2,5

51

Shower box with Mizar push-button shower and mixer. New Edge shower box with Boris push-button mixer.

Chromed brass shower, UV-resistant ASA housing. Fitted with Plastic shower with chromed head, UV-resistant ASA housing.
hot/cold water mixer. Model designed to be mounted preferably Fitted with hot/cold water mixer. Flat or wall mounting.
on the wall, hose exit parallel to the bulkhead.

Part No. Hose m Outer size mm Part No. Hose m Outer size mm
OSC-1523901 2,5 240x145 OSC-1525720 2,5 180x106 mm

Whale twist shower cold water, straight, grey Whale flush mount shower cold/hot water

Revolutionary and innovative, the hot/cold water temperature and the Removable piping connected to shower size 2.10 meters; hose
flowrate are set in an easy and evident way by rotating the lower part of adaptor to connect water thread size 1/2”.
the shower body. Its high capacity (8 Ltr/min) grants a powerful water
jet. ABS body and grey rubber edges (blue rubber on request) to protect Part No Type
the deck from accidental impacts. Pipe length 2.5 metres. 1703006 Hot /Cold

Easy installation: Olivia single-control combined mixer +
- Special section pipe with T removable shower
- Joint and pre-installed quick
- Release couplings; Fitted with flexible hose size 120 cm; double jet: shower tap.
- The flange can be installed from the outside with just one circular hole

Part No Function
1529011 Cold only

Swivelling faucet Slide series high cold water

1704602 Function 1704603 Hose Adaptor Part No
Part No Cold water Knob 3/8" male 1701900
1704602 Cold water Italy 3/8" male
1704603 Italy 52

GARBOARD DRAINS CAST 316 STAINLESS STEEL THRU HULLS

Forged brass. Cast from 316 stainless steel for strength and corrosion resistance.
WRENCH OPENING Flanges are beautifully polished. Easy to install. Various sizes available.

(Meet ABYC requirement for underwater use)

Part No. Cutout DIA. Flange DIA. Part No. For Hose Max Hull Thickness
4694590
28.5mm 55mm 2841102B 1/2" 11/16"
2841103B 3/4" 11/16"
INTAKE STRAINER New 2841104B 13/16"
2841105B 1" 11/16"
2841106B 11/4" 11/16"
2841107B 11/2"
7/8"
2"

Cast 316 stainless steel. Includes a grounding 90o For Hose Max Hull Thickness
washer and a nut. Keeps river and lake debris
from clogging your engine system. Part No. 5/8" 1"
3/4" 1"
Part No. NPSM Pipe 2894561 1
28941985 1” 2894562 1" 15/16"
2894563 11/8" 113/16"
2894564 11/2"
2894566

Fully threaded New

Part No. For Hose Max Hull Thickness

Part No. NPSM Pipe 2841102A 1/2" 5/8"
2841103A 3/4" 3/4"
2841103C 3/4” 2841104A 11/4"
2841104C 1” 2841105A 1" 11/2"
2841105C 2841106A 11/4" 15/8"
1 1/2” 2841107A 11/2" 21/2"

2"

ONE WAY HOSE 90 ELBOWS- HOSE TO HOSE
CONNECTOR New

This new product features a collar to lock the Part No. For Hose Length of Stem
two halves together. Collar is made of 5894018
reinforced nylon making the connection secure 11/2" 51mm
and tight. Connector body is sturdy polypropyl-
ene. One-way rubber flapper valve is built in.

Part No Length For Hose Color COMPOSITE THRU HULLS
1194763 170mm 1/2", 3/4", 1" Gray
1194764 258mm 1", 1-1/4",1-1/2” Gray

53 RESIN THRU HULLS Molded in fibre reinforced Acetal
with beautifully polished stainless
Molded in white Acetal. Streamlined flange. steel cap ultrasonic welded on
Above waterline use only. flange. Provide long lasting
corrosion resistant look.
Straight
Straight, transom w/scupper valve

Part No. For Hose Max Hull Thickness Part No. For Hose Max Hull Thickness
2894665
11/8-11/4" 1 1/4" 2894677 11/2" 1 7/8"
2894679 2" 1 7/8"

90 degree Straight

Part No. For Hose Max Hull Thickness Part No. For Hose Max Hull Thickness

2894642 5/8" 1 1/4" 2894671 1/2" 1 1/4"
2894643 3/4" 1 1/4" 2894672 5/8" 1 1/4"
2894643S 3/4" 1/2" 2894673 3/4" 1 1/4"
2894644 1 1/4" 2894674 1 1/4"
2894645 1" 1 1/4" 2894675 1" 1 1/4"
2894646 11/8-11/4" 1 1/4" 2894676 11/8-11/4" 1 7/8"
2894648 1 7/8" 2894678 1 7/8"
11/2" 2893058 11/2" 11/4"
2" 2"

11/4"

SEAFLO manufactures a variety of Invincible Marine Thru-hull FittingsMade of
thru-hulls for your specific application. high impact, corrosion proof nylon. For use
Our Thru-Hulls are meant for installation above the waterline. Includes back side nut.
through the transom and are ideal for
overflow use in livewell installations or as Part No. Size
an exhaust port for a bilge pump. These
thru-hulls are available in a variety of sizes 2823860 1 1/8"
ranging from 5/8″ up to 1-1/2″. Their 2823866 1 1/2"
construction is designed to resist degrada- 5205058 1 1/4"
tion as a result of chemical and saltwater
exposure. Scupper Thru-Hull 38mm

Part No. Size Height White nylon thru-hull with scupper valve attached. Suits
38mm (1½") hose.
SFDS1-0750-01 3/4" 80.0
SFDS1-1000-01 1" 93.0
SFDS1-1250-01 1-1/4" 97.0
SFDS1-1500-01 1-1/2" 102.0

Scupper Valve 70mm O.D. with Rubber Flap 9223004

White nylon material with rubber flap valve Part No 9223004
that opens to let water out then seals back Max hull thickness 75mm.
to prevent water entering. Total Length 157mm
Cut out Hole 45mm Supplied with S/S screws
Product Features:

Part No 9223021

Overall diameter 70mm Nylon drain plug - press fit

9223021 Internal diameter 48mm Supplied with S/S screws

Cockpit Drain Part No. Fits Hole Flange Dims
469490W 25mm 42mm

Nylon Drain Plug - Screw Mount

3441850 Part No. Fits Hole Flange Dims
cast from 316 stainless steel for strength and corrosion resistance. 469491W 25mm 52x35mm

Part No. Flange mm Net mm Length mm Plastic Elbow Fittings
3441850 80 50 47

Brass Drains Part No : 2823907

Part No. Description 2823907 White plastic polypropylene threaded fittings with
a 90 degree barbed hose connection for fitting
4661842 Snap tight drain, 25mm through the hull or through bulkhead connec-
4661844 Turn tight drain, 25mm tions. Suits hose I.D sizes as shown below.
4094511 Brass tube, 48mm (L)
4094521 Brass tube, 59mm (L) 20mm (3/4")
4094531 Brass tube, 73mm (L)
Double Ended Hose Barb Connector
(3/4'') 20mm Hose

Gas Tank Vent / Thru Hull New Made from white polypropylene, this double
ended thru bulkhead fitting provides watertight
All of our composite thru hulls on page 114 can be transition through bulkheads or tanks.
modified to be tank vents, with ss mesh.
Part No : 2823900
Part No. For Hose 2823900
2894675 1 1/8" - 1 1/4" Product Features:
Made from white polypropylene
Overall length - 125mm
Suits 20mm (3/4") hoseHole Cut 25mm (1")

54

Fuel Filter & Water Seperator Kit 10 Micron Fuel Filter with Aqua VueTM Bowl,
Mercury/Yamaha Style
10 Micron gasoline filter with disposable catridge,Mercury type.
Ethanol-blended fuel absorbs more water and loosens more particulants than
regular fuels; proper filtration is required for every horsepower engine.

Sierra's Fuel/Water Separators:
Remove over 98.8% of emulsified water from your gasoline.
Are over 90% efficient at removing particles as small as 10 micron.
Flow at 90 GPH to feed even the hungriest motor.

Part No. Description
6823550 With die aluminium type
6823551
Catridge

Gear Lube Pump

For use with 32oz(946ml)plastic bottles of lower unit lubricant. Fits any out
board or sterndrive with a 3/8"-16 drain screw. Includes yamaha adapter.

Part No. SS Cup Holder
6023543

Plastic Drink Holders

Folding Drink Holders Part No. Flange Diameter Cutout Diameter LED
108 mm 89 mm With-out
4847900 108 mm 89 mm
4847901 108 mm 89 mm Blue
4847902 Red

Part No. Description - Two step design to hold cups of different sizes.
482300W Fixed, White - A foam gasket sits at the bottom for a soft padding.
- Drainage provided for connections with 5/8" hose.

Organaizer with Cup Holder Injection molded nylon

Part No. Lever adjustment.
4823240
WHITE STORAGE CADDY Cruiser Organizer White Suction Cup. Part No. Base Dimensions
1323681 64 x 92 mm

55

Flush head cockpit drain fitted with strainer net Shower nylon drainer w/filter 38 mm

Made of white nylon. Made of white nylon, fitted with filter
and 100° elbow
Part No. Size Thread Ø mm Hose Adaptor mm Length mm
1739550 1”1/2 Part No.
47 32/38 117 1741180

Sierra Bilge Flex

Sierra Shields Bildgeflex is made up of a single layer of corrugated 2823842
polyethylene. Bildgeflex is resistant to mild chemicals and salt 2823842 :ID 29 mm,Length 50 FT,Black
water. Sold by the Foot.

Part No. Description

SRA-116-120-0340B 3/4" BILGEFLEX 500' BLK
SRA-116-120-0340W 3/4"BILGEFLEX 500' WHT
SRA-116-120-1120W 1 1/2" BILGEFLEX 150' WHT
SRA-116-120-1180B 1 1/8" BILGEFLEX 300'BLK
SRA-116-120-1180W 1 1/8"BILGEFLEX 300' WHT
SRA-116-120-1186B 1 1/8" BILGEFLEX 50' R/O (1 BOX = 50 FEET)
SRA-116-120-1186W 1 1/8" BILGEFLEX 50' R/O (1 BOX = 50 FEET)

HOSE CLIP

Part No. Description

8361101 13-20mm
8361102 23-36mm
8361103 29-47 mm
8361104 40-60 mm

56

Asa White Access Hatch FLUSH inspection hatch

The faired cover hides the frame completely; flush hinges; 180° opening;
walking surface. UV BASF resistant.

♦ Made out of durable UV resistant ASA plastic
♦ Reinforced lid design to maximize plastic strength
♦ Non skid surface
♦ New gasket design to ensure whether tight seal
♦ Mount vertical or horizontal
♦ Easy to install

8823709

Asa Deck Plates inspection Ports Part No. Outside Inside Cut

Made out of durable UV resistant ASA plastic 2029100 380x280 mm 295x198 mm 310x210 mm
2029200 600x350 mm 513x265 mm 530x280 mm
Screw-In Deck Plates 2029300 375x375 mm 285x285 mm 300x300 mm
2029400 520x465 mm 430x375 mm 445x390 mm
Nonskid Diamond Cross-Cut Pattern 2029500 600x250 mm 515x165 mm 530x180 mm

Part No. Size Colour Faired inspection hatch with hidden screws
4623104C 4" white
4623106C 6" white 180° opening, very sturdy, antiskid finish, interchangeable sizes

Pry-Out Deck Plates

Nonskid Raised Pebble Pattern

Part No. Size Colour
4623108C 8" white

Plastic Deck Plates Improved Part No. Outside Inside Cut

These deck plates are designed to have the O-ring secured under the cap, 2029800 280x380 198x295 mm 210x310 mm
eliminating the problem of the O-ring falling out when it was placed on the base. 2029900 350x600 265x513 mm 280x530 mm
Please note that the clear lid models should be kept from contact with acetone
or other strong solvents. Inspection hatch with removable front lid

Part No. Inside Dia. Colour Very sturdy anti-skid surface; splash-proof lid closure with neoprene seal;
4623103 102mm(4”) white flush mounting; they can be used as hatches for lockers, fishing containers or
4623106 152mm(6”) white as boxroom hatches or bayonet front bulkheads; removable front for easy
access. Ideal for installation on dashboard with nearby steering bench.

Deluxe style Colour Part No. Outside Inside Colour
white
Part No. Inside Dia. 2030220 305 x 355 mm 225 x 275 mm White
2030230 375 x 375 mm 295 x 295 mm White
4694547 102mm(4”) 2030240 350 x 600 mm 250 x 500 mm White

Hatch fitted with hidden screws & cam cover PUSH PULL inspection hatch
locking
Opening and closing with flush handle and snap-in locking system; neoprene
cover gasket; 175° opening.

Part No Outside Dia. Inside Dia. Colour Part No. Outside Inside Colour
2084500 325mm 240mm White
2030300 380x280 mm 295x198 mm White
2030500 405x375 mm 320x290 mm White
2030600 520x465 mm 430x375 mm White
2030400 600x350 mm 513x265 mm White

57

Large, Plastic Deck Plates ABS Hose Vents

Molded in “Acetone” proof polypropylene. Lid is Injection molded in black or
secured by a strap. Waterproof. white ABS. Flush or with
collar.

Part No Inside Dia. Colour Part No Color For Hose Dia. Collar Height
4694570 203mm(8”) White 2294329W White 102 mm 76mm
222321W White 102 mm Flush

ABS Louvered Vents Solar Vents

Top 200mm dia. Cutout hole 101mm
dia.Stainless steel or plastic top.

Part No Color Width Length Width Length
226125W White 261mm 125mm 9294486 Complete - S.S. top

Gas Spring Brackets

Nylon Step Handles

Molded with a contoured handle grip. The flat, 3801342 3801341 3801311
textured upper surface allows the handles to be Part No Type Version
used as steps. 3801341
3801342 Standard MM External
986120B Width Length 3801311 Standard MM External
Black 41mm 165mm Standard MM External

Stainless Steel Gas Spring With Ball Head

Item Open mm Closed mm Stroke mm Response Kg Ø Body mm Rod Ø mm Requested ball Ø

3802031 254 178 76 9 15 6 10
3802032 254 178 76 14 15 6 10
3802035 305 216 89 20 15 6 10
3802040 380 240 140 12 18 8 10
3802041 380 241 140 18 18 8 10
3802042 380 241 140 26 18 8 10
3802043 380 241 140 38 18 8 10
3802045 500 295 205 20 18 8 10
3802046 500 295 205 29 18 8 10
3802047 500 295 205 38 18 8 10
3802048 600 345 255 20 18 8 10
3802049 600 345 255 30 18 8 10
3802050 600 345 255 40 18 8 10
3802051 695 386 299 30 22 10 10
3802052 695 386 299 45 22 10 10
3802055 922 536 386 60 22 10 10

3802025

58

Turbo 4000 Series II In-Line Blowers Seaflo 4” 270CFM In-Line Bilge Blower Fan

Part No Description
SFIB1-130-01 Standard, 12V, 3 Inch
SFIB1-270-02 Standard, 12V, 4 Inch

Attwood's new and improved Turbo 4000 Series II sets the standard for SEAFLO 4” In-line Blowers provide ventilation for bilges, engine
in-line blower performance. Utilizing advanced fan blade design compartments, galleys and heads. Designed for efficient, high output
techniques, Attwood has developed a blower system that matches air operation, these blowers feature our exclusive front and rear shaft
flow of existing in-line blowers at a significantly reduced noise level. seals and corrosion resistant motor housings for long life. Compact
The first vane axial-flow fan bilge blowers designed using aerospace and easily installed on any flat surface, SEAFLO In-line Blowers provide
technology to maximize performance. No other bilge blowers in the higher air flow and lower amp draw.
industry provide such powerful system output at such a low power
input in a compact size. SEAFLO Retangular Shape Portholes
with 320mm Window
Part No Description
1747 Standard, 12V, 4 Inch
1731 Standard, 12V, 3 Inch

SEAFLO Oval Shape Portholes Part No
with 323mm Window
SFPP1-04

SEAFLO 4” In-line Blowers provide ventilation for bilges, engine
compartments, galleys and heads. Designed for efficient, high output
operation, these blowers feature our exclusive front and rear shaft
seals and corrosion resistant motor housings for long life. Compact
and easily installed on any flat surface, SEAFLO In-line Blowers provide
higher air flow and lower amp draw.

SEAFLO manufactures the toughest portholes, with a variety of sizes to SEAFLO Portholes with 21cm Window
fit an assortment of applications. We use an Anti-Aging, Ultraviolet-Re-
sistant ABS Thermoplastic with robust reinforcement. Easy click-in
construction, corrosion free synthetic fittings and durable rubber
seals. Their rugged design provides performance that you can rely on
for years rely on for years.

Part No

SFPP1-03

Aluminium Portholes with Window

Part No. Size cm) Color
SFPP1-01 21 White

SS OVAL Portholes with Window

1143504 1143099 1143505

Part No Sets of Handle Cut-out Dimension Material
1143099 1
1143504 1 305 mm Aluminium

175x375 mm Aluminium

Part No. Over All Dimension Cut-Out Dimention
1143124
1143505 1 244x429 mm Aluminium 216x472 mm 186x430 mm

59

Door Button Door Holder

Stamped stainless steel base, nylon button. Stainless Steel 316 Door Stop Catch 2.5" Long
Holds door securely in place
Part No. Size Overall Measures 2.5" long on 2"
4241045 60mm diameter mounting plate
Rubber bumper helps minimize
Part No. Size Overall slam and vibration noise
Proven durable on thousands of boats
Surface Mount Latches And Locks Lounge 4843316 2,5"X2"

The new Lounge series offers users more convenient choices. Compact Surface Mount Locks

Easy to install; all surface mount. 17 Series
Flexible choices to add to a door: latch only, deadbolt only, or complete door lock.
All marine materials

Swing Door Lock Compact, light duty version. Plastic with chromed
finish. Body 55x47mm. Supplied with plastic
spacer for surface mounting.

Part No. Strike Type Handle Type
4394764 Both Round Knob

Smart Handle Style inside Push Button Cabinet Latches Improved
Smart
Part No. Smart Opening The attractive latch opens and closes a cabinet
4394433 Right, out door with a simple push of a button. For door
4394434 Left, out thickness 16mm to 22mm (spacers are supplied
with each latch). Choice of materials: Stainless
steel, brass and plastic. Available in various
finishes. Easy to install. Cutout dia. 25.4mm (1”)
for all models.

Swing Door Deadbolt Round Part No. Material Finish Button

Deadbolt with locking mechanism only. Cylinder lock, open with flat Round 6294784 Plastic Chromed
key. Elliptical escutcheon on the outside. Ideal for adding security to Rectangular 6294787 SS 304 Polished
most doors. 6294896 Plastic Chromed

Self-latching Push Button Latches

The new latch features smooth and silent operation. For door thickness
19mm to 25mm with suppliedspacers. Strike included. Choice of materials
for button and dressing ring: Stainless steel, brass and plastic. Available in
various finishes. Easy to install. Cutout dia. 25.4mm (1”) for all models.

outside inside

Part No. Description
4394435 Deadbolt with lock

Round Part No. Material Finish Button Finish Ring
Round
Convex 6294884 Plastic Chromed Chromed
Rectangular 6294887 SS Polished Polished
Convex 6294890 SS Polished Polished
Rectangular 6294891 SS Polished Polished
6294893 Chromed Chromed
6294896 Plastic Chromed Chromed
Plastic

60

Cast Stainless Steel Slam Latches Boat Hatch Latches Turning Lock Lift Handle

Cast 316 stainless steel, polished.

Part No. 6845003

Marine Boat Hatch Latches Turning Lock
Lift Handle Material: AISI stainless steel 316
Lost Wax Process and surface polishing

Part No Size
6845003 89x76x13 mm

Part No Overall Diameter Cutout Diameter
9294821
62mm 51mm

Part No. 6845007

Marine Boat Hatch Latches Turning Lock
Lift Handle Material: AISI stainless steel 316

Part No Size
6845007 89x58.3x62x5 mm

Cast 316 stainless steel, polished. Includes a back plate and spacer. Spring Part No. 6841204

loaded handle. Flush when not in use. New Marine Boat Hatch Latches Turning Lock
Lift Handle Material: AISI stainless steel 316

Part No Overall Dia. Cutout Dia. With Lock Part No External Bulkhead Hole
9294809 60mm 51mm NO 6841204 62mm 50.5 mm
9294809K 60mm 51mm YES

Pull Rings SS 316

Cast 316 stainless steel, polished. Spring loaded lift rings.

Part No Overall Dia. Cutout Dia. With Lock Part No Size LxW Part No Size LxW
6845203 62 mm 51 mm NO 6841822 38x44 mm 68413202 76x58 mm
6845206 62 mm 51 mm YES 6841823 65x55 mm

Adjustable Lever Latch New

Part No Size LxW Part No Size D mm
6841825 57x40 mm 6841047 50

Cast 316 stainless steel, polished. Adjustable level screw to grip the compart-
ment wall tightly and easily. Press the push button to lift the handle.

Part No Overall Dia. Cutout Dia. With Lock Part No Size LxW Part No Size LxW
8294803 60 mm 51 mm NO 6841801 62x44 mm 6841801B 48x38 mm
8294803K 60 mm 51 mm YES

61

Concealed Hatch Latches Heavy Duty Hatch Latches

Hinged lid covers the latch when not in use. Pull handle. Cast 316 stainless steel with plastic spacers.
Detents indicate open or closed position.
Stainless steel construction.
Lid size: 100 x 105mm

Part No. Size Overall
3241005
Complete with back
support & striker arm

Compression Hatch Latches New

Cast 316 stainless steel, polished. With a winch handle Part No. Overall Dia. Cutout Dia. For Hatches With Lock
star key to lock and unlock. Detents indicate open or
closed position. Compression movement 5mm. 8294823 91mm 76mm 8-36mm No
8294823K 91mm 76mm 8-36mm Yes
8294825 60mm 51mm 4-32mm No
8294825K 60mm 51mm 4-32mm Yes

Part No. Overall Dia. Cutout Dia. For Hatches With Key
8294806 63.5mm 42mm 8-32mm No
8294806K 63.5mm 42mm 8-32mm Yes

Cast Stainless Steel Flush Lift Rings New

Cast 316 stainless steel, polished. Spring loaded lift rings.

Part No. Overall Dia. Cutout Dia. For Hatches With Lock
8294824 91mm 76mm 8-36mm No
8294824K 91mm 76mm 8-36mm Yes

Part No Overall Dia. Cutout Dia. Heavy Duty Hatch Latches New
6894682 60mm 51mm
6894683 90mm 76mm Compression Fit

Cast 316 stainless steel, polished. Spring loaded
design allowing a compression stroke up to 4mm.

Cast Stainless Steel Slam Latches

Cast 316 stainless steel, polished. New

86804 Round model

Part No. Overall Dia. Cutout Dia. With Lock Water Proof Part No. Overall Dia. Cutout Dia. For Hatches With Lock

8294804 45mm 38mm (1.5”) No No 8294817 60mm 51mm 6-38mm No
8294804K 45mm 38mm (1.5”) Yes No 8294817K 60mm 51mm 6-38mm Yes
8294805 75mm 63mm (2.5”) No Yes 8294818 75mm 60mm 5-21mm No
8294805K 75mm 63mm (2.5”) Yes Yes 8294818K 75mm 60mm 5-21mm Yes
8294819 62mm 51mm (2.0”) No Yes 8294822 91mm 76mm 11-40mm No
8294819K 62mm 51mm (2.0”) Yes Yes 8294822K 91mm 76mm 11-40mm Yes

62

Swing Ring Lifter Deluxe Swing Ring Lifter New

Cast 316 stainless steel, polished. Spring
loaded ring is flush and rattle-free when not
in use. Can be used vertically or horizontally.

Part No Size

Part No. Material Size 6894920 83.5 x 21mm
6894910 25 x 88mm
Stainless Steel
Spring Loaded

Smart Cleats New Offset Cleats

Cast in 316 stainless steel, with polished surface. Sleek profile exemplifies Cast 316 stainless steel. Beautifully styled
renowned fine craftsmanship. Easy to mount. No exposed fasteners. Locking to enhance appearance of any boat.
nuts and washers are included. Studded under deck installation. Nuts and
washers are included.

Part No. Cleat Length Cleat Height Stud Dia. Stud Length
3094248 203 46 3/8" 64

Part No. Dimensions F Fold-down Cleats
ABCDE 68
3094494 126 33 21 44 11 75 Cast in 316 stainless steel. With anti-rattle hold down device to keep the cleat
3094496 155 38 26 57 11 85 folded when not in use. Easy to install. Underdeck or surface mounting.
3094498 203 49 39 71 13

316 Stainless Steel Hollow Base Cleats

Part No. A Dimensions (mm) F Stud Dia.
BCDE

Part No. Length Height 3093288 117 114 40 38 43 67 1/4”
3093023 152mm (6") 31mm
3093024 203mm (8") 38mm 316 Stainless Steel Scandinavian
3093025 254mm (10") 47mm Style Cleats
3093026 305mm (12") 58mm

316 Stainless Steel Heavy Duty
Hollow Base Cleats

Part No. Length Height Part No. Length Height
8894110 203mm (8") 50mm 3094904 254 mm 40 mm
8894111 254mm (10") 61mm
8894112 305mm (12") 69mm

63

Bollard Type Cleat (AISI 316) Sandiego Cleat

Part No. Length mm Part No. Length mm
3041205 205 3041215 215
3041265 265

Wing Folding Cleat Bull Dog Cleat

Made of mirror-polished AISI 316 stainless steel. The open/close mechanism Part No. Length Height Stud
is equipped with snap lock to avoid accidental opening. 160mm 53mm 8mm
4013116 200mm 64mm 10mm
Part No. Closed Open Flat stud knuckles Breaking load 4013120 250mm 80mm 10mm
3394102 280x44 235x44 4013125
3x12 mm 9460

Folding Pad Eyes White plastic base for

With a rubber pad to absorb vibration.

Part No. Base Size D-Ring Stock Part No. Help prevent possible oxide filtering and give a
6594687 78x78mm 10mm better look to the cleats.
4013140
4013141
4013142

Stainless Steel Release Pins

Machined from 6.35mm (1/4") stainless steel stock.

Part No. Dimensions (mm)
4494430 AB
76 114

64

Foldable Ladder - Standard Version AISI 316 Telescopic Ladder For Gangplank AISI 316

Fitted with a telescopic ladder 3/4 steps under our product number Made of mirror-polished stainless steel.
49.541.03/04 + box to be recessed into the bathing platform. Made of mirror
polished stainless steel; patented model; easy to use, fast installation.

Part No. Version with steps Steps Tube Ø mm Length mm - Extended
4954103 white 3
4954104 white 4 19/25/32 889
19/25/32/38 1,156

Part No Steps Length mm Front frame Telescopic Ladder
4954403 3 870 390x86
4954404 4 1168 390x86

Foldable Ladders Wall-mounting

Made of mirror polished stainless steel, designed for stern mounting, fitted
with oval steps; these type of steps are smoother and more comfortable
than traditional rounded steps; the upper steps are coated with a anti-skid
plastic material.

Part No. Version with steps Steps Width mm Length mm
3945202 Black 3 228 875
3945302 Black 4 228 1145

Webbing Buckles

Part No. Version with steps Steps Width mm Length mm Polished stainless steel.
3945905 Black 3 228 600
3945906 Black 4 228 875

Part No. Fits Webbing
5961342 51mm

Stainless Steel Snap Hooks

Eye Straps

Part No. Stock Dia. Length Part No. Eye Dia. Overall Length

9841105 5mm 50mm 5964104 12mm 11mm
9841106 6mm 60mm 5964105 16mm 63mm
9841107 7mm 70mm 5964108 16mm 63mm
9841108 8mm 80mm
9841110 10mm 100mm
9841112 12mm 120mm

With eye Part No. Eye Dia.
5965105 9.5mm
Stock Dia.
Part No. 5mm Length Nylon Webbing with Hook
6mm
9841205 7mm 50mm Adjustable 1"width x 96" length
9841206 8mm 60mm
9841207 10mm 70mm Part No.
9841208 12mm 80mm 9661130
9841210 100mm
9841212 120mm

65

SS 316 RATTLE FASTNER SS 316 ECCENTRIC LATCH

Part No Size Part No Size
5245901 111 x 50 mm 5245301 84 x 30 mm

SS 316 SWIVEL HASP SS 316 BARREL BOLT

Part No Size Part No Size
8641703 90x25.5mm 3841001 100x42.5mm

SS 316 BARREL BOLT

SS 316 SWIVEL HASP WITH KEY

Part No Size
3841003 102x43mm

SS 316 BARREL BOLT Part No Size
8641199 76X30mm

BARREL BOLTS

Part No Size Chromed
6141000 108X39mm
Part No
U-BOLTS 3894462 (L)
3894462 51mm
76mm

SLIDING BOLT ANTI VIBRATION

1293043 3912705 Part No Description Size
3817701 Sliding Bolt 60X31 mm
Part No Size 3817701-2 Sliding Bolt Lock Set 27x31 mm
1296211 12 x 381 x 127mm
1293043
10 x 130 mm
Part No
OSC-3912705 Size
OSC-3912706 12 x 122 x 46 mm
OSC-3912707 12 x 136 x 46 mm
12 x 131 x 46 mm

66

Swivel, Eye & Eye 316 S.S. Spad Eyes Stainless Steel

Part No. Stock Dia. Length Part No. Base Eye Dia.

8541456 6mm 65mm 5645312 30 x 35mm 15 x 12mm
8541458 8mm 90mm 5645313 35 x 40mm 20 x 17mm
8541460 10mm 115mm 5645314 40 x 50mm 22 x 20mm

Stainless Steel Wire Rope Clips

Swivel, Jaw & Jaw 316 S.S. Part No. Wire Size

Part No. Stock Dia. Length 3345604 4mm
3345605 5mm
8541466 6mm 65mm 3345606 6mm
8541468 8mm 90mm 3345608 8mm
8541470 10mm 115mm 3345610 10mm
3345612 12mm
3345614 14mm

Swivel, Jaw & Jaw Stainless Steel "D" Shackles

Part No. 316 S.S. Part No. Pin Size Opening
Stock Dia. Length
8541466 4947904 4mm 8mm
8541468 6mm 65mm 4947905 5mm 11mm
8541470 8mm 90mm 4947906 6mm 12mm
10mm 115mm 4947908 8mm 17mm
4947910 10mm 20mm
4947912 12mm 24mm

Loxx Female Snap Fastener Va-stahl 15 Mm Stainless Steel Bow Shackles

Fitted with press-functioning system and spring lock on the female.Female Part No. Pin Size Opening
for oversized head hood, 15-mm Ø for better grip, for fabric up to 3 mm thick.
2945204 5mm 11mm
Part No. 2945206 6mm 12mm
1044000 2945208 8mm 17mm
2945210 10mm 20mm
2945212 12mm 24mm

Loxx Male Self-tapping Snap Fastener Series Of 4 Fasteners for Bimini

Fitted with press-functioning system and spring lock on the female.Male Part No.
with self-tapping stainless steel screw. Length A: 12 mm. 1045502

Part No. Series Of 4 Fasteners for Bimini
1044000
Part No.
SS Snap Fasteners A+B,C 1045501

Bulk pack of 1000 pieces.

Part No. Item
1030311 A+B
1030312
C

67

Hot Dipped Galvanized Danforth Galvanized Bruce Anchor

♦ Hot Dipped Galvanized Bruce Claw Anchor, 55 Lbs, For 48' Boat to 55' Boat Use.
♦ Application: Most Bottom Type Including Mud, Sand, Rocks and Coral.
♦ Excellent Holding Power, Stows Easily on a Bow Roller, Sets and Resets Quickly,

Hot Dipped Galvanized Carbon Steel Material.

Part No Weight Part No Weight
2147205 5 kg
189658205 2.5 KG 2147207 7.5 kg
1896584 4 KG 2147210 10 kg
1896586 6 KG 2147215 15 kg
1896588 8 KG 2147220 20 kg
18965810 10 KG
18965812 12 KG
18965815 15 KG
18965820 20 KG
18965825 25 KG
18965830 30 KG
18965850 50 KG

Durable materials and a traditional design make this an economical alternative Danforth Anchor SS 316
to heavier, more expensive anchors.

♦ Constructed of high tensile steel.
♦ Hot dipped galvanized and specially treated to ensure a long lasting,bright finish.
♦ Specially designed to fit smaller anchor lockers.

Galvanized Folding Anchor 316 Stainless Steel Mirror Polished. Danforth Fluke Style Boat Anchor.
Material: stainless steel 316.

Part No Weight
4841205 2.5 kg
4841004 4 kg
4841006 6 kg
4841008 8 kg
4841010 10 kg
4841015 15 kg

316 Stainless Steel Bruce Anchor

Part No Weight Part No Weight
1841005 5 kg
6747105 1.5 kg 1841075 7.5 kg
6747602 2.5 kg 1841100 10 kg
6747603 3.2 kg 1841150 15 kg
6747604 4 kg 1841200 20 kg
6747606 6 kg
6747608 8 kg The Bruce style anchor is constructed of high-grade stainless steel for maximum
6747610 10 kg tensile strength. Remains stable even when tide and wind conditions change.
6747612 12 kg Constructed of heat-treated high-tensile steel in a single-piece design that’s
6747615 15 kg very effective in a variety of seabeds. It remains stable under a wide range of tide
6747620 20 kg and wind conditions. Stows easily on a bow roller. Quick set and reset.

For boats and small watercraft. Hot dipped galvanized finish.

♦ Collapsible to reduce storage space required.
♦ Locking collar to lock in collapsed or open positions.

68

ANCHOR WINCHES

With 100% 316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive
and durable windlasses on the market. It works at the push of a button and has two built-in features that make it unique; motor protection and
anchor lock. Plus it's affordable. For boats up to 10.5m (35 ft)

Part No. Part No.
LM-6670011108-312 LM-6671011198-138

The V700 now comes with a gypsy able to accept both 6mm and 7mm Product Description;
(1/4) inch chains. Fits calibrated chains: 6mm DIN766, 1/4" G4 or BBB, 5RSH FKDLQ J\SV\
7mm DIN766 Minimal parts for enhanced reliability Late configure 0DQXDO FKDLQ UHOHDVH )UHH )DOO
boat / chain on boatyard assembly line Registered Community Design &RQH FOXWFK IRU VPRRWK HDV\ FRQWURO
No. 001740531-0001 2SWLRQDO PDQXDO RYHUULGH PRWRU JHDUER[
: $ 5 3 'UXP
Features; )DOO VDIH DQFKRU ORFN
5REXᚔ UHOLDEOH ZRUP JHDUER[
100% 316 stainless steel deck unit. )Dᚔ )LWറ RSWLRQ IRU TXLFNHU LQᚔDOODWLRQ DQG OHVV KDVVOH
IP Rated Housing. (PHUJHQF\ UHFRYHU\ NLW DYDLODEOH
Fall Safe anchor lock. :DWHU UHVLᚔDQW ,3 NLWV DYDLODEOH
Fast line speed. )RU ERDWV XS WR P IW
Manual recovery option.
Impact-resistant motor cover.

Part No. Part No.
LM-0057406 LM-66840008

Manufactured from high grade manganese steel Friction-free surface to make dropping and weighing anchor easier
Self launching Won't damage the deck or topsides. Allows you to safely stow anchor
Lloyd's Register Type Approval while cruising and deploy at short notice . Range of rollers to fit the
Guaranteed for life against Breakage most common combinations of anchor, mounting style and boat
Constructed of 304 stainless steel.

69

Bow Roller Self Launching Bow Roller

2841001 2841008 Self locking bow roller with movable roller - as the anchor is pulled in
to place the roller moves to 'lock' the anchor in place, preventing
Made of mirror polished investment cast AISI 316 stainless steel; banging or movement. Suitable for most types of anchors, made of
fitted with lock for anchor models Dan forth, Bruce, Trefoil®, CQR etc, mirror polished investment cast AISI 316 stainless steel; incredibly
indestructible stainless steel pulley. durable stainless steel pulley, includes a safety pin.

Part No. 2841001 2841008 Part No. Height mm Size mm Anchor Size
Anchor Weight 6/10 kg
Length 340 mm 620 mm 2841242 420 76 7.5-15 kg
Height 160 mm 83 mm 2841256 600 76 10-20 kg
2841275 750 90 15-30 kg
2841295 950 95 30-50 kg

Bruce Anchor Roller, Fixed

OSC-0 135002

Made of mirror polished investment cast AISI 316 stainless steel ;
fitted with lock for anchor models Dan forth, Bruce, Trefoil®, CQR etc,
indestructible stainless steel pulley.

Cast mirror polished AISI 316 stainless steel, wide overhang area to A B C Width
prevent anchors from touching the bow. Stainless steel pulleys, 340 mm 240 mm 160 mm 75 mm
suitable for anchor models: CQR, Bruce, Dan forth, Trefoil®, Delta etc.

Part No. 0134196 Tapered base for pulpits AISI316 45 32 mm
Anchor Weight 15 kg

Length 480 mm
Height 75 mm

Bow Roller For Delta Anchor

Made of mirror-polished AISI316 stainless steel, 1 x 8-mm mounting stud.

Part No. Angle Base Height For pipe Ø
1013509 45° 48 mm 62 mm 32 mm

Tapered base for pulpits AISI316 90 32 mm

These bow rollers for delta anchor are made of electro-polished 316
stainless steel with a low-profile design for mounting on the bow.
Hinged with an inner roller for self-launching operation. These bow
rollers are universal for easy fitting on most bows. Anchor rollers
make dropping and weighing anchor easier on you and your boat.
They help reduce chafe, prevent scratches and dings to your boat's
finish and provide a secure place to store your anchor when used in
conjunction with an optional chain stopper or tensioner.

Part No. Height mm Size mm Anchor kg Made of mirror-polished AISI316 stainless steel, 1 x 8-mm mounting stud.
2841217 70 328x96 8
2841220 100 430x160 13 Part No. Angle Base Height For pipe Ø
1013507 90° 48 mm 62 mm 32 mm

70

RAIL BASES (AISI 316)

Part No. Type Angle Degrees Pipe Ø mm 1022901 1022301
1022901 straight, round base 90 22 1022451
1025902 straight, round base 90 25 1322901 1122601
1022301 30 22 1222601
1025302 tilted, round base 30 25 1122901
1022451 tilted, round base 45 22
1025452 tilted, round base 45 25 1222011
1022601 tilted, round base 60 22 Pipe Ø mm
1025602 tilted, round base 60 25
tilted, round base 22
1122601 60 22 25
tilted, rectangular base 22
1125602 60 25 25
tilted, rectangular base
1122901 straight, rectangular 90 22
base
1125902 straight, rectangular 90 25
1222011 base 90 22
1225012 straight,"t" 90 25
1222601 straight,"t" 60 22
1222602 “T” 60 25
1322901 “T” 90 22
1322902 3 WAY 90 25
3 WAY

HAND RAIL FITTINGS (AISI 316)

Part No. Type Angle Degrees
132260E 60
Right and left
end brackets

132560E Right and left 60
end brackets

132260E 132260 132260 Central bracket 60

132560 Central bracket 60

TOP CAP & TOP SLIDE (AISI 316)

1400001 1500001 Part No. For pipes Description
1610001 1400001 22 top cap
1400002 25 top cap
1500001 22 top slide
1500002 25 top slide

DECK HINGES (AISI 316)

1690001 Part No. Angle Degrees Pin Size Description

1690001 90 6 mm deck hinge
1610001 10 6 mm angle deck hinge

71

Gas Tank Vents Stainless Steel Midget Vents

All tank vents meet ISO requirements.

Chromed Brass Vents

Part No. For Hull Fitting Part No. Width Length
16mm 3294360 41mm 41mm
1261301 12mm 16mm 3294370 57mm 54mm
16mm
1261304(90) 12mm

1261303 12mm

Cast 316 Stainless Steel Vents Small Cowl Vent
flush mount Stainless steel, bright vibratory finish. New

Part No. For Hull Fitting Type
6294005 4.5 - 32mm 16mm vertical
6294003 4.5 - 32mm 16mm
900

Cast 316 Stainless Steel Vents Part No. Height Width Length
flush mount, stamped ss spacer 3294380 25mm 90mm 93mm

Clam Shell Vents

Part No. For Hull Fitting Type
6241790 23mm 16mm vertical
6241791 23mm 16mm
900

Tear Drop Style Vent Part No. Length Width Height Material
Chrome plated.
3294330 140mm 115mm 52mm S.S.
3294340 170mm 148mm 57mm S.S.
3294350 190mm 170mm 72mm S.S.

Part No. For Hull Fitting Material Cowl Vents
1294105 16mm 19mm Zamak

Exhaust Guards Stainless steel cowl with solid plastic
base. The cowl may also be supplied with
an integral mounting flange which can be
mounted directly onto deck without a
plastic base. For use with 76mm (3”) .

Part No. For Hose

Part No. For Hose 3294362 76 mm
1894040 100mm

Motor Flushers Oil & Fluid Extractor

♦ Tubing storage holder
♦ Orange handle 3 Extraction tubes included

Supplied with hose adapter.

Part No. Muff Style Part No. Capacity Dimensions
3623207 Rectangular 5523169 6.5 ltr I 6.9qt. 2S-1I2"H x 7-1I4"W
3623205
Oval • No angle restriction to transfer liquid

72

Flush Mount Rod Holders - Cast Deluxe Clamp-on Rod Holders

Featuring cast 316 stainless steel mounting tops, the rod holders have been This new cast 316 stainless steel clamp-on rod holder is designed with an
restyled to render a modern, streamlined appearance. Available in three unique front adjustment screw. It allows adjustment without having to
different angles: 0 and 30 degrees. Santoprene flip-up cap is optional and is remove rod holder from its clamped-on position. It is 360 degree adjustable
available in white and black. and can be mounted on either horizontal or vertical rail. Beautifully polished,
with Santoprene insert to provide better performance and durability. For
38mm rods.

Part No. For Rail
8845762 22~25mm (7/8"~1")

Part No. Deg. Cap & Gasket End Length Deck Mount Adjustable Rod Holder

8894172AW 90 White Open 229mm ♦ Marine Grade, Surface Polishing.
8894174AW 60 White Open 235mm ♦ Rubber tipped end for protecting rods.
8894172AB 90 White Open 229mm ♦ Easily mounts to deck with permanent base plate.
8894174AB 60 White Open 235mm ♦ Can rotate 360 degrees vertically and 180 degrees horizontally to allow a

Rod Holder Drain Plug multitude of positions.

Black PVC. Opening Part No. Length mm Inside Ø mm
51mm 8845751 292 41
Part No.
4793515

Fishing Rod Holder Fishing rod holder

100% AISI316 stainless steel base and pipe. Exclusive product made by
Osculati, fitted with rubber bushing for rod protection. Suitable for all fishing
rods available on the market. Special plastic wing nut for easy screwing.
Fitted with large and sturdy base with internal rod locking pin.

Part No Direction mm Length mm Inside Ø mm Part No Direction mm Height mm Bore Ø mm
4121156 Straight at 90° 230 41 4116800 82x72 350 46
4121150 Sloped at 60° 230 41

73

Cast 316 Stainless Steel Deck Fills Deck Fillers

Flush-mount plug, invisible screws hidden by the deck filler cap.

Hand buffed and passivated to ensure long lasting weather resistance. Part No. Marking Size
Caps are supplied with twist free spring tensioned stainless steel lanyards. 2086623 Water 38 mm
2086630 Fuel 38 mm

20.866.23

Key Free Hose Fills Quick Lock Deck Fillers

Streamlined, attractive design. Technical characteristics: 45° rotation snap lock, 7.7-mm projection, hidden
Opens easily with fingers. screws, stainless steel check cable with spring, fuel and diesel versions with
earthing cable, made of mirror-polished AISI 316 stainless steel, DIN standard
symbols.

Part No. Marking Size Part No. Marking Size
2036602 Water 38 mm
4694623 Fuel 1 1/2" 2036604 Fuel 38 mm
4694624 Water 1 1/2"
For 12/1" hose 4694641 Diesel
4694642 Fuel 2"
4694643 Water 2"
2"

Keyless Cap Marine Chromed Brass Deck Filler

Keyless design, with built in lift tab on cap and turn to open or close Fitted with special opening system that avoids the use of keys, coins or any
other device. Designed to cover the flange completely, thus improving its
Part No. Marking Size watertight features. Version fitted with straight or 30° sloped joint pin (to be
4693323 Fuel 2" used when the fueling surface is sloped, in accordance with ISO 8099/1
standards). Fitted with small internal chain, 88-mm max Ø. RINA type-ap-
proved.

Part No. Marking Size Part No. Marking Size

4645011 Fuel 1 1/2" 2066701 Fuel 50
4645014 Water 1 1/2" 2066702 Water 38
4645012 Fuel 2066703 Diesel 50
4645015 Water 2" 2066704 Fuel 38
2" 2066707 Water 50

Nylon Deck Fills

For 11/2" Hose

Nylon Deck Fills Part No. Marking Size
4694286 Fuel 1 1/2"
For 12/1" Hose 4694287 Water 1 1/2"

Part No. Marking Size Fender
SFCF1-01 Fuel 1 1/2"
SFCW1-01 Water 1 1/2"

Adapters 1994887 1994885 Part No. Description

Machined from brass or Part No. Description 6893042 62*16*2.2cm - Blue & White
injection molded plastic. 1994885 Brass barb 1/4 " - NPT - 5/16 " 6893044 72*20*2.6cm - Blue & White
1994887 Brass elbow male /female 1/4 " NPT 6893040 51*14*1.4cm - Blue & White

74

Seagate - Cast Hinges Stainless Steel Hinges - Cast

These heavy duty Cast in 316 grade stainless steel and hand polished. Each Investment cast 316 grade stainless steel. These hinges are hand polished to
can be supplied with underdeck studs or countersinks for surface mounting. a high luster.
Top pin or under pin.
Strap Hinges

Part No. Finish Shaft Screw Size
8945061 Buffed #6 102 x 25mm (4" x 1")
8945032 Buffed #6 152 x 29mm (6" x 11/8")

Butt Hinges

SHAFT Except a few exceptions, the shaft system Part No. Finish Shaft Screw Size
illustrated below are used on hinges. Type A, B, and C, 8945011 Buffed #10 38 x 38mm (11/2" x 11/2")
8945021 #10 51 x 51mm (2" x 2")
are permanent mount security shafts. Fed

Door Hinges

COUNTERSINK FOR SCREW Different countersink Part No. Finish Shaft Screw Size
sizes are used depending on the size and application of Buffed #10 76 x 38mm (3" x 11/2")
8945604 Buffed #10 76 x 38mm (3” x 11/2") (reversed)
hinges. 8994604R Buffed #10 106 x 38mm (4" x 11/2")
8945607

PIN Most of the hinges are supplied with top pin. Hinge Short Side Door Hinge
with center pin are represented by letters CP following

the model number. Hinges with reversed pin are repre-

sented by a letter R following the model number.

Top Pin Center Pin Reversed Pin
(C P) (R )

Part No. Finish Shaft Screw Size
8945011 Buffed #10 38 x 38mm (11/2" x 11/2")
Flush Hinges New 8945021 #10 51 x 51mm (2" x 2")
Fed
Cast 316 stainless, polished. Sturdy and clean appearance, with all screws
concealed when closed. Part No. Finish Shaft Screw
8945401 Surface Top
89457640 Underdeck
Centre

Part No. Finish Shaft Screw
8945265B Underdeck Under
8945265 Top
Surface

31

Part No. Finish Shaft Screw
8945365B Underdeck Under
Part No. Finish Shaft Screw 8945365A Top
8994345 Buffed #5 Surface

Part No. Finish Shaft Screw
8994346 Buffed #5

75

Stainless Steel Hinges - Stamped Stainless Steel 316 L Hinges

Stamped from 304 grade stainless steel sheet. Beautifully hand buffed and These heavy duty Cast in 316 grade stainless steel and hand polished. Each
passivated. can be supplied with underdeck studs or countersinks for surface mounting.
Top pin or under pin.
Door Hinges

8993043 8993720

Part No. Finish Shaft Screw Size t - 3mm
8993043 Buffed A #8 A1: 36 A2 : 36 B : 38.5
8993720 Buffed A #8 A1: 68 A2 : 68 B : 38.5

Part No. Finish Shaft Screw Size
8993043 Buffed A #8 A1: 36 A2 : 36 B : 38.5

Part No. Mount Pin t - 2 mm t - 3mm
8945770B Underdeck Under Size
8945770A Under
Surface A1A2 : 33.5, B : 48, STUD: M5 75MM
A1A2 : 33.5, B : 48, STUD: M5 75MM

Part No. Finish Shaft Screw Size
A1A2 : 20 B : 20
8944040 Buffed A #8 A1A2 : 27 B : 30
8945430 Buffed D #8 A1A2 : 24 B : 40
8944048 Buffed D #8

Part No. Mount Pin t - 3 mm Part No. Mount Pin
8945771B Underdeck Under 8983365A Surface Under
8945771A Under Size 898365B Underdeck Under
Surface A1A2 : 33.5, B : 48, STUD: 75MM
A1A2 : 33.5, B : 48, STUD: 75MM

Piano Hinges t - 4.5mm

Part No. Mount Pin
8913060 Surface Under

t - 4mm

Part No. Finish Shaft Screw Size t - 4.5mm
8945616 Buffed D #6 32mm wide (open) x 1820mm, t:0.8mm
8945618 Buffed D #6 32mm wide (open) x 910mm, t:0.8mm

Part No. Mount Pin Size
8910365 Surface Under 103x65x4.5 mm

t - 1.5mm

Part No. Finish Shaft Screw Size Part No. Mount Pin Size
8947566 Buffed D #8 A1A2 : 33 B : 75 86321B Underdeck Under 145x65x4.5 mm
8947561 Buffed D #8 A1A2 : 25 B : 75
76

DIN316 766L S.S. Chain Stainless Steel Anchor Swivel

Stainless Steel Anchor Chain. Heavy duty 316 stainless steel anchor chain. Crafted from AISI 316 Stainless Steel, for maximum corrosion resistance and
superior durability.

Part No. Length Width Dia. Breaking Strength Part No. A B Chain Size
3547306 30.5 mm 20.4 mm 6 mm 6640 kg 83 16.5 6/8
3547308 40.0 mm 27.2 mm 8 mm 8960 kg 3341902 96.5 23 8/10
3341903 150 28
Mooring Rope 3341904 12/14

polyester mooring double braided rope with Rope cutter 220 V 65 W max 22 mm
loop 8mm*8m blister-b
Suitable for cutting ropes easily and in a matter of seconds.

3893269

Single Eye Swivel Stainless Steel Pulley Block

Part No. Volt Rope size up to mm Power
0601000
220 22 60 W

Part No. Size
6947425 25 mm
6947432 32 mm
6947450 50 mm

77

Hydro-Stabilizer Power Guard 27 Battery Box

Part No.
9067-1

Gives outboards and stern drives a performance boost, improving both stability New larger capacity! Vented black battery box for Series 27 batteries.
and handling. The Hydro-Stabilizer outperforms ordinary flat hydrofoils by (10-1/2"maximum height). Battery boxes meet ABYC Standard E-10 and U.S.
reducing drag when the hull goes on plane. Installs on a large variety of motor Coast Guard Specification number 183.420 as an OEM-installed battery
styles and sizes with included stainless steel bolts and lock nuts. Wings hold-down system. Polypropylene construction for total acid resistance.
constructed of black molded plastic. The Hydro-Stabilizer quickly puts the boat Hold-down straps resist 350 pounds of force, nearly four times the USCG
on plane, and helps pull skiers out of the hole faster. Even at lower RPMs, it requirement. Battery Boxes are drop tested in temperatures ranging from
keeps the boat on plane. The wings provide a smoother, more stable ride and -20°F to +120°F. Mounting hardware is included.
reduce ventilation in turns.
New Features
Part No. Description
9400-7 For Outboards and Stern Drives 50 HP and Above 4 cable openings, enlarged to .55" diameter
9401-7 Larger handles with rolled edges
For Outboards Under 50 HP Instructions molded inside cover

Heavy-Duty Adjustable Battery Trays

Adjustable Height Ski-Tows Part No.
9098-5

All-plastic and heavy duty, these battery trays use an adjustable cross bar
and posts to allow for universal fit of both short and tall battery styles.
Contain no metal parts to corrode and no webbing straps to fade ergonomic
nuts and bolts easily secure batteries.

Rigging Hose

Part No. Part No. Description
THM-RF-1 Rigging Flange, Fits 2" ID Hose, Black
SP96008 THM-RF-2 Rigging Flange, Fits 2" ID Hose, White
THM-RF-1-DP Rigging Hose - 2", 50 ft. roll, Black
The Attwood Difference THM-RF-2-DP Rigging Hose - 2", 50 ft. roll, White
Our heavy duty tow products will pull you anywhere you want to go.
We have the quality hardware for almost any recreational towing need.
We offer a wide range of configurations for swivel heads, posts, and bases.
Our towing products offer advanced features for durability and quality
performance.
The Pro-Swivl has a 360° rotational head with a nylon bushing for smooth
slalom pulling.

DO NOT use Ski Pylons to pull any recreational equipment that is tied to
the tow rope such as water tubes, aquaplanes, wakeboards, etc.

78

Polyform F-series

Heavy duty Fenders Polyform F-series cylindrical
fenders are offered in as many as 12 different sizes
to fit vessels ranging from the smallest dinghy up to
commercial ships and Navy vessels.

Art.no. Volume Liter Length mm Diameter mm Eye diameter mm Weight kg

F01S 2,8 370 130 18 0,62
F01M 4,0 465 130 18 0,68
F01L 5,3 560 130 18 0,75
F02 15 660 200 25 1,65
8 610 150 22 1,00
F1 16 610 220 28 1,75
F2 22 745 220 28 2,10
F3 35 1040 220 28 2,90
F4 35 775 290 28 3,00
F5 60 1090 290 28 4,20
F6 85 1020 375 28 5,30
F7 135 1440 375 28 7,60
F8* 275 1455 590 28 10,50
F11** 700 1880 750 40 23,00
F13

Polyform A-series

All purpose Buoys and Fenders

Polyforms A-series with its easily recognizable ribbed, reinforced ropeholds and the seamless construction of the Polyform buoy s and fenders are
part of the reasons why professional users all over the world prefer the Polyform A-series buoys â•fi and why these buoys have become synonymous
with "the best buoy money can buy". Polyform A-series are produced in 8 different sizes. Each model is designed and molded in order to offer a
maximum of strength in combination with highest possible buoyancy. The wide range, from the smallest to the largest buoy, make s them useful in
a wide variety of maritime sectors.

Art.no. Volume Liter Length mm Diameter mm Eye diameter mm Weight kg
A0
A1 5,7 / 3,4 280 210 22 0,60
A2 13,0 / 7,8 380 295 22 1,15
A3 32,0 / 19,2 500 390 25 2,10
A4 52,0 / 31,2 575 460 28 3,10
A5 90,0 / 54,0 710 550 28 4,10
A6 215,0 / 129,0 940 710 28 8,30
A7 405,0 / 243,0 1120 850 35 11,30
670,0 / 402,0 1420 1100 60 21,00
79

90 Elbow F-F 90 Elbow M-F

Size G Product Code Size G Size G1 Product Code
3/8'' 0090#100003 1/2'' 1/2'' 0092#100004
3/4" 0090#100005 3/4'' 3/4'' 0092#100005
1'' 0090#100006
1 1/4'' 0090#100007 Nipple M-M
1 1/2'' 0090#100008
2'' 0090#100009

Reducing Nipple M-M

Size G Product Code
1/2'' 0280#200004
1 1/2'' 0280#200008
2'' 0280#200009

Size G Size G1 Product Code
1/2'' 3/8'' 0245#100205

Lever Operated Ball Valve F-f Full Flow

Equal "T" F-F-F

Size G Product Code Size G Product Code
1'' 0130#100006 3/4'' 1570#120005
0130#100008 1'' 1570#120006
1 1/2'' 0130#100009 1 1/2'' 1570#120008
2'' 2'' 1570#120009

80

Grated Water Intake "Speedy" Series Grated Water Intake "Speedy" Series

Size G Product Code Size G Product Code
1/2" 1114#100004 1/2" 1121#100004
3/4'' 1114#100005 3/4'' 1121#100005
1'' 1114#100006 1'' 1121#100006
1''1/4 1114#100007 1''1/4 1121#100007
1''1/2 1114#100008 1''1/2 1121#100008
2'' 1114#100009 2'' 1121#100009

Thru-hull Connection with Hose Adaptor Water Strainer "Ionio" Series with Metal Cover

Size G Product Code Size G Product Code
3/4'' 1123#100143 1'' 1166#220006
1123#100152 1166#220008
1'' 1123#100161 1''1/2 1166#220009
1''1/4 1123#100170 2''
1''1/2 1123#100179

2''

Scupper "Space" Series Air Vent "Arrow" Series

Size G Product Code Size G Product Code
3/4'' 1192#100005 3/4'' 1198#110005

Scupper "Space" Series

Scupper "Space" Series

Size G Size G1 Product Code Size G Size G1 Product Code
1/2'' 3/8'' 0241#100205
3/4'' 1/2'' 0241#100208 3/4'' 19 1004#100139
1'' 25 1004#100150
81 1''1/4 32 1004#100157
1''1/2 38 1004#100167
2'' 50 1004#100175

BRITE WASH

Part No. SRD-YBP-0301

Brite Wash is scientifically formulated to clean fiberglass, clear coat, metal, rubber and
painted surfaces.

Cleans dirt, grease, salt and more without dulling your finish or stripping your wax.

Unique Features: Works Great On:

Will not strip wax or polish Boats
Resists water spots Cars
Concentrated RV's
Environmentally smart Patios & Decks

SRD-YBP-0101 Brite Wash Value: Save 45 percent per ounce when you purchase 1 gallon vs 32 ounces:
SRD-YBP-0305
SRD-YBP-0701 SMC

Part No. SRD-YBP-0305

SMC is a scientifically formulated multipurpose, multisurface cleaner.

Surfaces: Purposes:

Fiberglass Black Streaks
Vinyl Vinyl Seating
Carpet Exhaust Stains
Rubber Bilges
Teak Carpet Stains
Acrylic Wheel & Rims
Canvas Fish Blood and more

Eliminate the need to use numerous cleaners; SMC does it all!

32oz SMC comes in a ready to use trigger spray bottle.
1 gallon SMC Concentrate mixes with 4 gallons of water to make 5 gallons! (1 part SMC to 4
parts water.) Serious Marine Cleaner Value: Save 86 percent per ounce when you purchase 1
gallon concentrate vs 32 ounces:

SERIOUS SHINE QUICK DETAILER

Part No. SRD-YBP-0305

CLEAN, POLISH & PROTECT

In Car & Rv Around the Boat In the Home

Vinyl Seating Hull Mirrors
Dash Board Cockpit Stainless Steel Appliances
Electronic Touch Screens Cabin Shower Glass Doors
Glass Eisenglass Windows
Clear Coat Vinyl Seating Solid Surface Countertops
Weels & Tires Fiberglass and much more..

This unique formula provides high gloss and a UV protective coating that also repels water.
Now featuring a integrated click close spray nozzle and a rust resistant can.
MADE IN USA

82

BUFF MAGIC COMPOUND

Part No. SRD-YBP-0301

The ultimate restoration compound! Buff Magic is designed to remove oxidation and surface
imperfections, restoring that showroom shine. Also serves as an excellent metal polish for all
of your stainless hardware.

Buff Magic is scientifically formulated with jeweler's rouge to be a metal polish, as well as a
buffing and polishing cream. This unique formula changes as you use it. With each pass of a
buffer or hand polishing the proprietary abrasives in this compound break down smaller and
smaller. This effectively creates a compound that can work your finish from very dull to ultra
glossy with just one product. Additionally, since you do not have to switch products, this will
save you time and money.

SRD-YBP-0301 Buff Magic removes: Buff Magic is perfect for:

SRD-YBP-0202 Oxidation Boats
Gelcoat staining Cars
83 Surface rust Rv's
Tarnish Pot & Pans
Plexi-glas scratches Acrylic Tubs & Showers
P800 and finer DA scratches and much more...

Buff Magic has been formulated to be user friendly whether buffing by machine or hand. It is
also an ideal metal cleaner and polisher for steel, aluminum, brass, bronze, copper, gold and
other precious metals. Buff Magic is a NMMA Innovation Award Winner.

PRO POLISH WAX

Part No. SRD-YBP-0202

Pro Polish is scientifically formulated to protect your Car, RV, Yacht, Boat, Motorcycle or
Personal Watercraft from the harsh effects of the sun, saltwater, and environmental fallout.
Pro Polish Repels water and provides a deep high gloss shine, while protecting your surface
from the harsh effects of the sun with UV inhibitors.

Better than an old fashioned wax, Pro Polish is a polymer based formula with cosmetic grade
ingredients and contains no fillers or talc. It goes on quicker and easier while protecting your
finish against sun, salt, acid rain, and other harsh environmental elements.

Pro Polish will protect your:
Fiberglass
Gelcoat
Clear Coat
Aluminum

NOTE: When buffing out Pro Polish there will be no major mass of white powder as you work
off the product. This white powder that you may be used to from other products is Talc and
is used as a filler. Pro Polish will produce virtually no waste as you work with the product.
This will allow you to apply and buff out the product in less time with less effort. Enjoy a new
way to protect! Pro Polish.

Pro Polish Value: Save 40 percent per ounce when you purchase 1 gallon vs 16 ounces:

MADE IN USA

Automatic Bilge Cleaner

Part No. SDY-800Q

SDY-800Q Product Description
SDY-815Q Automatict TM Bilge Cleaner
SDY-410SB Heavy duty, concentrated formula. Protects hull from costly deterioration. Dissolves, emulsi-
fies and combines grease, oil and scum with bilge water. Automatically reaches difficult
places with the roll of the boat. Kills bilge odor; saves scrubbing time. 98%biodegradable
earth-friendly formula.

Model 800Q 32 fl. oz. (946 ml).

Boat Zoap

Part No. SDY-815Q

Product Description
The most popular boat cleaner in the world. All-purpose, non-caustic cleaner that works
well in fresh or salt, hot or cold water. Removes gull droppings and harbor scum. Great
for washing greasy pots, pans, stoves, sinks and dishes. Excellent for washing sails.
100% biodegradable earth-friendly formula.

Model 805Q 32 fl. oz. (946 ml)

Fiber Glass Restorer & Wax, Paste 11oz

Part No. SDY-410SB

Product Description
One Step Fiberglass Restorer and Wax

A heavy duty cleaner and wax that works without the grueling effort or effects of highly
abrasive rubbing compounds. Deep cleans and restores color to dirty or oxidized fiberglass or
painted finishes. Follow up with a coat of Miracle Coat Boat wax to seal the lustre.

SDY-420 Miracle Coat Metal Polish
Deck Brush Kit
Part No. SDY-420

Product Description
Miracle Coat Metal Polish
Concentrated cream formula for cleaning all metals, aluminum, brass, stainless steel and
copper. Can also be used to clean fiberglass. Special formula will remove oxidation from
metal leaving a lustrous, clean look.
Model 420 8 Fl. Oz. (236 ml)

Deck Brush Kit

1323210 1323808
Incudes soft non-scratch brush with squeegee end for easy
Includes three pieces 3 to 6 inch aluminium shaft cleaning and telescopic 64cm to 103cm aluminium pole.
soft finish brush,mop & boat hook
84

STEERING WHEELS

Steering Wheel T17A/35 STEERING WHEEL T17CF/35
Polyurethane Ivory CARBON FIBER

T17A/3 T17CF/35

Style: Inflatable Boats - Motor Boats Style: Inflatable Boats - Motor Boats

Diameter: 350mm / 13.77” Diameter: 350mm / 13.77”

Spokes: 5 Spokes Stainless Steel Taper Spokes: 5 Spokes Stainless Steel Taper

Grip: Ivory/Beige Polyurethane Grip: Carbon Look - Gloss Paint

Hub: Stainless Steel Hub: Stainless Steel

Centre Cap: Jvory Centre Cap: Carbon Look
Connection: Connection:
Shape: Standard 3/ 4” Taper Shape: Standard 3/ 4” Taper

15° Degree 15° Degree

Colour: Ivory/Beige Colour: Carbon

Certification/approvals: CE Certification/approvals: CE

STEERING WHEEL T26CF STEERING WHEEL T26L MO
CARBON FIBER MAHOGANY WOOD

T26CF/35 T26L MO/35

Style: Inflatable Boats - Motor Boats Style: Inflatable Boats - Motor Boats

Diameter: 350mm / 13.77” Diameter: 350mm / 13.77”

Spokes: 6 Curved Stainless Steel Spokes Diam.16 Spokes: 6 Curved stainless steel spokes diam.16

Grip: Carbon look - Gloss Paint Grip: Mahogany Wood - Gloss Paint

Hub: Stainless Steel Hub: Stainless Steel

Centre Cap: Carbon look with rosa dei venti in the centre Centre Cap: Mahogany wood with rosa dei venti in the centre
Connection: Connection:
Shape: Standard 3/ 4” Taper Shape: Standard 3/ 4” Taper

7° Degree 7° Degree

Colour: Carbon Colour: Mahogany

Certification/approvals: CE Certification/approvals: CE

85

STEERING WHEEL T22MO/35 STEERING WHEEL T22B/35

T22MO/35 T22B/35

Style: Inflatable Boats - Motor Boats Style: Inflatable Boats - Motor Boats

Diameter: 350mm / 13.77” Diameter: 350mm / 13.77”

Spokes: 6 Curved spokes stainless steel diam. 10 mm. Spokes: 6 Curved spokes stainless steel diam. 10 mm.

Grip: Mahogany Wood - Gloss Paint Grip: Polyurethane

Hub: Aluminium inside and PU outside Hub: Aluminium inside and PU outside

Centre Cap: Chrome cover with rosa dei venti in the centre Centre Cap: Chrome cover with rosa dei venti in the centre
Connection: Connection:
Shape: Standard 3/ 4” Taper Shape: Standard 3/ 4” Taper

7° Degree 7° Degree

Colour: Mahogany Colour: Black

Certification/approvals: CE Certification/approvals: CE

STEERING WHEEL T21B/35 STEERING WHEEL T21W/35
POLYURETHANE BLACK POLYURETHANE WHITE

T21B/35 T21W/35

Style: Inflatable Boats - Motor Boats Style: Inflatable Boats - Motor Boats

Diameter: 350mm / 13.77” Diameter: 350mm / 13.77”

Spokes: Spoke Stainless Steel Spokes: 6 Curved spokes stainless steel diam. 16mm

Grip: Carbon look - Polyurethane leather look grips - Gloss paint Grip: Polyurethane

Hub: Stainless Steel Hub: Aluminium inside and PU outside

Centre Cap: Stainless steel ouside and black inside Centre Cap: Stainless steel with rosa dei venti in the centre
Connection: Connection:
Shape: Standard 3/ 4” Taper Shape: Standard 3/ 4” Taper

Flat 15° Degree

Colour: Carbon Colour: White Ral code 9010

Certification/approvals: CE Certification/approvals: CE

86

STEERING WHEEL T17MO STEERING WHEEL T18CF/35
MAHOGANY CARBON FIBER

T17MO/35 T18CF/35

Style: Inflatable Boats - Motor Boats Style: Inflatable Boats - Motor Boats

Diameter: 350mm / 13.77” Diameter: 350mm / 13.77”

Spokes: 5 Spokes stainless steel taper Spokes: Spoke Stainless Steel

Grip: Mahogany Wood - Gloss Paint Grip: Carbon look- Polyurethane leather look grips - Gloss paint

Hub: Stainless Steel Hub: Stainless Steel

Centre Cap: Mahogany Wood Centre Cap: Stainless steel ouside and black inside
Connection: Connection:
Shape: Standard 3/ 4” Taper Shape: Standard 3/ 4” Taper

15° Degree Flat

Colour: Mahogany Colour: Carbon

Certification/approvals: CE Certification/approvals: CE

STEERING WHEEL T18BA/35 STEERING WHEEL T14L
POLYURETHANE

T18BA/35 T14L/35

Style: Inflatable Boats - Motor Boats

Style: Inflatable Boats - Motor Boats Diameter: 350mm / 13.77”

Diameter: 350mm / 13.77” Spokes: 9 stainless steel diam. 8 mm

Spokes: Spoke Stainless Steel Grip: Mahogany wood - Gloss paint

Grip: Beige polyurethane - Black leather look grips Hub: Aluminium inside and PU outside

Hub: Stainless Steel Centre Cap: Stainless steel cap
Connection:
Centre Cap: Stainless steel ouside and black in the centre Positioner: /Standard 3 4” Taper with positioner included inside
Connection:
Shape: Standard 3/ 4” Taper Included for adjustment of wheels with T design

Flat Shape: 7° Degree

Colour: Beige Ral code 1007 / black Colour: Mahogany

Certification/approvals: CE Certification/approvals: CE

87

STEERING WHEEL T9B/35 STEERING WHEEL T9W/35

T9B/35 T9W/35

Style: Motor Boats Style: Motor Boats

Spokes: 6 Stainless steel diameter 14mm Spokes: 6 Stainless steel diameter 14mm

Grip: Black Polyurethane Grip: White Polyurethane

Hub: Inside Alluminium and outside Polyurethane Hub: Inside Alluminium and outside Polyurethane

Centre Cap: Stainless Steel Centre Cap: Stainless Steel
Connection: Connection:
Shape: /Standard 3 4” Taper or on request Shape: /Standard 3 4” Taper or on request

7° Degree 7° Degree

Colour: Black Colour: White

Certification/approvals: CE Certification/approvals: CE

STEERING WHEEL T9G/35 MTX-LM-W-1B

T9G/35 LM W 1B

Style: Motor Boats Part No: LM W 1B
Spokes: 6 Stainless steel diameter 14mm Inbuild Hub Diameter: 350 mm
Spokes: 3
Grip: Black Polyurethane Structure: PPCP

Hub: Inside Alluminium and outside Polyurethane

Centre Cap: Stainless Steel Hydrolic Power Steering
Connection:
Shape: /Standard 3 4” Taper or on request

7° Degree

Colour: White

Certification/approvals: CE

Steering Wheel W/Knob SS 316 Part No.
UFC-41049P
Part No. Item
9396051 343 mm OL 150 Hydraulic oil - 2 liters (0,5 gallons).
9396052 395 mm KIT OB/M-60(90) Hose with preassembled fittings at one end only.
9396053 457 mm

88

Steering Cable Hydrolic Power Steering

Features: Part No. POHS 300AF

Steering cable to be used with LM-H-001 / LM-H-002 Helm. The Steering Wheel is not included in Package Outboard Steering
Output ends of Stainless Steel. System and can be purchased separately.
Maximum Travel : 9 inch (230 mm).
Minimum bend radius : 8 inch (200mm).
Maximum working load at Tiller end : 5000N (500kg).
Cable Outer Diameter : 15 mm.
Spiral inner cable Diameter : 8 mm.

Part No. Description Packaged Outboard Hydraulic Steering System 300 Hp Consist of:
Hydraulic Helm Pump
MTX-SC-11-09 Mechanical Steering Cable 9 Feet
MTX-SC-11-10 Mechanical Steering Cable 10 Feet Front Mount Hydraulic Helm Pump:
MTX-SC-11-11 Mechanical Steering Cable 11 Feet LM-HP-27 Hydraulic Cylinder
MTX-SC-11-12 Mechanical Steering Cable 12 Feet
MTX-SC-11-13 Mechanical Steering Cable 13 Feet Front Mount Aluminium Hydraulic Cylinder :
MTX-SC-11-14 Mechanical Steering Cable 14 Feet LM-OC-300AF Hydraulic Oil
MTX-SC-11-15 Mechanical Steering Cable 15 Feet Hydraulic Oil 1 Litre :
MTX-SC-11-16 Mechanical Steering Cable 16 Feet
MTX-SC-11-17 Mechanical Steering Cable 17 Feet LM-HO-150 Hose Kit and End Fittings
MTX-SC-11-18 Mechanical Steering Cable 18 Feet 2 Hoses of 5 meters each :
MTX-SC-11-19 Mechanical Steering Cable 19 Feet LM-HT-24
MTX-SC-11-20 Mechanical Steering Cable 20 Feet
With pre-assembled fittings :
LM-EF-01

Manual Helm Tie Rod Kit

LM T 1

Part No. LM T 2
LMH 401

LM T 3

Features: Part No. Length
LM T 1 800mm
Compact Planetary Design. LM T 2 600mm
Conventional Threaded Ends. LM T 3 Min 600mm - Max 950mm
Applicable for Boat Length: 9 mtr for Out Board and 10.5 mtr for Inboard.
For twin engine installation.
Construction Details : Roll Threaded at both ends.
Can be cut to size to suit engine installation.
Helm Cover: High Pressure die Cast Zinc Alloy.
Planetary Gear Set : High Pressure Die Cast Zinc Alloy. Link Arm
Shaft: Galvanised Steel.
No. of Steering Wheel Turns: 3.8 Approx.
Maximum Steering Wheel Diameter: 16 inch (400 mm).
Powder Coated options for increased corrosion resistance.

Standard 3/ 4” tapered shaft.

Seal Kit Bezel Kit

Features: LM-B-1 Part No. Link Arm kit
LM L 1 Stainless Steel

SEAL KIT(POHS 300AF) Bezel made from Engineering Plastic. To connect steering cable to the engine / rudder.
MTX-LM-SK-300AF 90 degree and 20 degree options. Available in heavy duty mild steel or stainless steel versions.
Black and white color available as Permanently lubricated rod ends.
standard options. Kits supplied complete with dust wiper boot, nylock nut and 3/8 mount bolt.
Suits most popular brands of outboard engines.

89

Part No. Size FUEL SENSER

6919338 250 mm Measurements are done by series of reed switches positioned inside the level
6919340 300 mm tube. The float is the only moving part of the sensor, thereby minimizes potential
6919341 350 mm mechanical failures. These features contribute to the sensor's precise level
6919342 400 mm measurements. It has two wires. Black wire is signal and it is connected to fuel
6919343 450 mm gauge. Another wire is to earth.
6919344 500 mm
6919345 550 mm Suitable for truck, generators/gen set, bus and marine field.
6919349 600 mm Widely used in fuel, water, kerosene and chemical tanks.
OEM quality, widely used on automotive and marine OEMs.
Reed switch, steady output signal.
Simple and stronger structure, Advanced corrosion resistance.
Long using life, anti-vibration,anti-explosion.
High quality fuel level sensor.
Economical level sensing solution, long service lifespan Material:
316 Stainless Steel, Volt: 12V/24V, Output Signal: 240-33Ω.
Assembly: SAE standard 5 holes

GAUGES

Suitable for all kinds of fuel sensors, and display the liquid level of the fuel tank.

Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.

Bezel Material: SS316,Double layer anti-fogging glass.

Installation Dimension: Φ52mm(2”).

Installation: lock the gauge to baseboard directly by hand. Part No. Description
Connector: integrate 12V/24V patch cord. 7919282
Background light: Red or Yellow. Fuel, with Silver Bazel
Water, with Silver Bazel
Indicating Range: Empty- Full. 7919284
Fuel, Black
Working Voltage:12/24V. 7919425 Water, Black
Signal: 240~33. 7919426 Fuel, White
Protection grade:IP7 for front side;IP5 for back side. 7919017 Water, White

7919027

Signal: 0~190

Part No. Description
7919285 Fuel
7919286 Water

90

Seat & Seat Pedestal

Base and column made of anodized aluminium + anodized aluminium
seat support with rotating slide Dimension 430/630 mm.

Part No.
4871099

9023519 962390D 9923593

Part No. Part No. Description
4871100
9923593 Seat Slide W/Forward & Backward Adjustable Function
Anatomic Seat H52 RAL 9010 962390D Fixed Height-300mm Pedestal
9023519
Rotational moulded plastic core. HD foam padding. Opening in the White seat shell W/ Upholstery white seat
lumbar region. In compliance with ABYC standards.
Comfort Bucket Seat

Made of white rotational moulded polyethylene. Ready to fit any
pedestal available in our catalogue. Fitted with 8 brass threaded
inserts for fixing pedestals and slides.

Part No. Part No.
4841002 4868401

Stainless Steel Cleaner Spray “Rust Free” Product

It removes rust stains from fiberglass surfaces, spray bottle.

It deeply cleans stainless steel, aluminium, Part No.
chromed brass, laminated plastic. Antioxidant 6574800
agent that leaves no streaks or marks.
International Antifouling Paint
Part No.
6526400

White Grease Spray

Protective and water-resistant white lubricating Part No. Description
grease. For mechanical parts that need both
protection and lubrication. Resistant to high YBB602/2.5LTR Paint Micron Extra Eu Blue
temperature (it contains lithium) and salty water. YBB624/2.5 LTR Paint Micron Extra Eu Navy Blue
YBB623/2.5LTR Paint Micron Extra Eu Black
Part No. YBB600/2.5LTR Micron Extra Dover White
6526100 YBB601/2.5LTR Micron Extra Eu Red
YPA984/2.5LTR Primer Grey
YTA085/1LTR Thinner

91

Binoculars Key Rings

7x50 ZWCF triple tested prism Floating Foam
binoculars. Rubber coating
protects it from knocking and Vinyl covered foam in nautical theme. Bright colors. Can be
corrosion. Protective covers are supplied with custom printing - ideal for promotion.
provided for all lenses. Comes in
carry case with strap.

Improved

Part No. Overall Length Weight Part No. Description Foam Size
2394745 180mm 720g
6294701B Oval foam 85x35x20mm
Binoculars 6294701R Oval foam 85x35x20mm
6294701W Oval foam 85x35x20mm
25x30mm optic. Coated lens. 6294701Y Oval foam 85x35x20mm
Made from solid brass, brightly 3582403 Mercury 85x35x20mm
polished. Supplied with a PVC belt 3582404 Yamaha 85x35x20mm
pouch.
Styrene Floats
Improved

Part No. Compacted Length Extended Length Dia.
8994752 35mm
135mm 340mm

Rubber Landing Nets Part No. Description
6894052 2-1/4" x 3-7/8"
Multi use red and white hole -3/8" 6894062
3" x 5"

Cable Boot

Molded rubber or plastic.

Part No. Dia. x Depth Hoop Size (LxW) Handle (L) Overall (L)
3623719 19" x 28.5cm 545x 415mm 560mm (Slide) 1100mm
3623720 19" x 60cm 596 x 415mm 760mm (Slide) 1300mm

Self Locking Cable Tie & Selfadhe Sive Tie Mount

Part No. Description Material Base Dia.
188000 Plastic 76mm
Flexible opening
w/cable tie

20102 20180 Battery Terminal
Part No. Description
20102 Cable Tie 4 mm Packed in pairs, universal model; selected pins sizes 8 and 10 mm used to avoid
20180 inverting battery cables.
Self Adhesive Tie Mount 28 X 28 mm

Mirror

6449400 Part No.
2223862

Material : • Made of steel

Fitted with nylon housing, glass mirror with adjustable chrome Zama bracket,
suitable for panel boards or for windshield mounting; panoramic sight model,
mirror size 100x300 mm.

92

productinformation

Tesa® 4439

Waterproof masking tape for precise and flat paint edges outdoors

The tesa Precision Mask® Outdoor guarantees razor-sharp paint edges for the outdoors. Because the adhesive compound and backing
material are not only extremely precise, they are also particularly weatherproof and UV-resistant. This waterproof masking tape compris-
es a tear-proof, thin special backing which is coated with an acrylate adhesive compound. Thanks to this combination, the wate rproof
masking tape remains stable for a long time in all weathers. The paper masking tape is a reliable partner for painting work of all kinds
and, combined with sound workmanship, will return excellent results.

Main Application

▪ Outdoor applications
▪ For long-term applications (up to 8 weeks)
▪ Flat, sharp edges to paint and lacquer
▪ For high-quality painting and lacquering work

Technical Data Flat paper
100 μm
▪ Backing material Acrylic
▪ Total thickness 1.8 N/cm
▪ Type of adhesive 5%
▪ Adhesion to steel 35 N/cm
▪ Elongation at break 8 weeks
▪ Tensile strength
▪ UV-resistance

4439 tesa Precision Mask

Application

Flat, sharp edges to paint and lacquer
For high-quality painting and lacquering work

Product Features

Thin but particularly tear-resistant backing
Balanced adhesive strength for sensitive and also slightly rough surfaces
Easy to remove without residues and without damaging the surface
Very supple
Slightly transparent backing facilitates very good, accurate positioning
UV-resistant for 8 weeks

Part No. Total thickness [µm]
04435-00015-00 50m x 25 m
04435-00018-00 50m x 25 m

93

Lifebuoy White Self-inflatable Manual Lifejacket

OSC-2240709

OSC-2239802

Part No. Description

OSC-2240709 Ring lifebuoy white-orange Fun Self-inflatable Manual Lifejacket 150 N Red

Made of anti-petrol plastic foam and coated with electro welded PVC; Activation Color
external Ø 58 cm. Manual Red

Application: 2.5KG life buoys are fit for all kinds of vessels and aquatic
equipments,used by the seaman and passengers for life saving.

2893555 Part No. Description
2893556 2.5 kg life ring
♦ Comply with SOLAS 1974 and its latest amendment 2893296 1.5 kg children life ring
♦ The shell: HDPE 2893491 1.5 kg white children life ring
♦ Filler: Rigid Polyurethane
♦ Drop height: 80M
♦ Certificate: CCS/EC

Life Vest

SDI-DHWYC93-3 SDI-DHDF86-5

94

Q-67122489 Classic Cockpit Tube
Q-67122497
Q-67132659 Grab the family and get wet this weekend! The Mega Wing Deluxe is a fully covered, triple rider cockpit
style tube designed with a rounded nose for easy starts, large side gussets for extra stability, and a low
center of gravity for a controlled ride. The large squared off stern keeps the tube Mega Wing Deluxe
stable on turns and inclement water.

Features;
90” L x 90” W (deflated), pre-assembled.
3 rider tube with comfortable inflatable back and seat cushions.
840D Nylon cover, fully enclosed heavy duty bladder.
6 padded handles with knuckle guards for added safety.
Boston valve for easy inflation, and quick connect tube rope attachment.
Covered mesh bottom drains excess water.
Peel and stick repair kit included.
Cockpit, Fully, 3 Rider, QC, Repair Kit.

* Note: Due to the large size of this tube, it is not recommended for small children riding by themselves.

Multi-position Sit-on-top Tube

The new Outsider series breaks away from the standard tube design and allows for multiple rider
positions and various seating arrangements. 2 riders sit in the divided “rider zone” with soft EVA pad
and inflatable back rest, while 1 rider can kneel from the rear platform. Side outboard wings divert
excess spray away from the riders and increase stability. Add the front-to-back tapered design, and the
Outsider 3 is a high performing tube that can accommodate the entire family.

Features;
80” L x 88” W (deflated), pre-assembled.
Fully covered, 2 to 3 rider tube with unique seating positions and aggressive style.
840D Nylon cover with heavy duty bladder.
ully padded handles with knuckle guards for added safety.
Padded seats with inflatable backrest for a comfortable ride.
Kneel on the rear platform for aggressive style.
Boston valve for easy inflation, and quick connect tube rope attachment.
Covered mesh bottom drains excess water.
Peel and stick repair kit included.
Sit-On-Top, Fully, 3 Rider, QC, Repair Kit.

Connelly Big Gamer Towable Tube

Features;
Fully covered sit on top style deck tube.
840 Denier Nylon cover with 28 Gauge PVC bladder.
Inflatable backrest.
6 Padded handles with knuckle guards.
Delrin Quick connect fitting.
Boston Valve and covered bottom mesh drain venst.

5LGHU
/ ; : GHᚐDWHG

95

Q-83000007 Q-86014024
The CWB Double Handle Ski Rope is easy on the hands with a soft grip and
end caps for finger protection. The Connelly 60' Tube Rope is a heavy-duty rope for tube that carry up to 4
Round Classic Handle in standard diameter riders. The durable rope resists stretching, and keeps your tube securely in
Natural rubber handle for soft grip tow behind the boat. Connelly's Quick Connect system makes it easy to hook
Bridles 2-rope double braid construction up your tube and get going.
5" and 11" end caps for finger protection
Total length: 60 feet
LED Torch New 5/8" diameter
Heavy duty rope pulls tubes for 1-4 riders
Quick Connect hookup gets you going quickly
Durable rope with minimal stretch

Aluminum body (115mm long)with high Divers' Torches
power 1W LED. Uses 3 AAA batteries.
Waterproof at IP 67. Heavy duty torch with tough durable
polycarbonate lens. Ideal for recreational
Part No divers. Waterproof to 50 meters.

4632204

Part No. Length Use Batteries
4632202 155mm 2 x 1.5V C cell

LED Torch for underwater use up to 50 m

Fitted with 3-watt HD LED. Part No
IP68 4632108

96

Product ID: 22300, 3400 Swivel jack, 1200 lb

Popular 1200 lb. pivoting import tongue jack, tested to D-L standards. Zinc plated. 11 inches
of travel. 1/2 inch swivel handle, 6 inch wheel. Individually boxed.

DL-3400-22300

Product ID: 22457, 6400 1000 lb swivel jack

Model 6400A Swivel Tongue Jack, made in USA. Zinc TUFFPLATE finish. Jack rotates easily
to horizontal towing position, and locks in place. Fits tongues up to 3x5 in.

DL-6400-22457

Product ID: 22580, 6800 Dual wheel jack, 1500 lb

Model 6800A Dual wheel pivoting tongue jack, 1500 lb capacity. Two 6-inch wheels for added
stability. 12 inches of travel, for tongues up to 28 inches from the ground. Zinc TUFFPLATE
finish. Fits tongues up to 3x5 inches.

DL-6800-22580

97