RAM Mounts Vehicle Catalog

MDT-MATE™ Patents and Trademarks

51www.rammount.com/IP

MDT-MATE™
The RAM® MDT-MATE™ is the perfect mounting solution for mounting mobile data terminals in a
wide variety of vehicles. Modular and interchangeable, this product line easily integrates into RAM’s
full line of No-Drill™ vehicle base products and RAM’s Tough-Box™ consoles. This solution is the most
versatile of its kind with single or double keyboard mounting swing arms and easy grip knobs, which
allow the mount to be adjusted to achieve optimal performance, operating and stowing positions.
Regardless of the mounting location, this system is comfortable to use and provides excellent
viewing angles! Designed to support a display at or near the center of the vehicle dash, this system
provides 5’’ of total offset of the MDT mounting surface. Mounted electronics can be positioned where
they are needed the most, not simply where the mount allows. RAM’s design makes it possible for the
operator to safely and ef ciently access equipment which is mounted in the dash behind the MDT. The
RAM® MDT-MATE™ includes pre-drilled holes to add RAM® mounting bases, enabling the installation of
additional devices, keyboards, printers or other peripherals. Integrated cable management ensures that
the installer can safely route all associated cables to avoid any safety or operational concerns.

Specifications
Features:
Bottom bracket can be rotated 180° to provide 5’’ total offset from the MDT mounting surface.
8’’ anged upper Tele-Pole™ enables optimized positioning, giving installers the freedom to choose the
con guration best suited to the vehicle being out tted.
MDT-MATE™ included pre-drilled holes to add RAM® mounting bases, enabling the installation of additional
devices, keyboards, printers or other peripherals.
Integrated cable management ensures that the installer can safely route all associated cables to avoid any
safety or operational concerns.

Included Hole Patterns: Articulation:
AMPS in vertical orientation Forward 80°, back 45°
AMPS in horizontal orientation Material:
75 x 75mm VESA Powder coated marine grade aluminum and steel
50 x 100mm
RAM® 3 hole at 120°

RAM® MDT-MATE™ SHOWN BELOW WITH MOBILE DATA TERMINAL AND
KEYBOARD ON RAM® TOUGH-TRAY™ CONSOLE AND
NO-DRILL™ VEHICLE MOUNT

52 VEHICLE MOUNTING CATALOG MDT-MATE™
RAMMOUNT.COM

MDT-MATE™

MDT MOUNT WITH UPPER TELE-POLE™
Part Number Placement Swing Arm Length Articulation Material

RAM-DIS- RAM® N/A Forward Powder
MDT2-8 lower 80° coated
Tele- Back 45° marine
Pole™ & grade
vehicle aluminum
mounting and steel
systems

Mobile Data Terminal display mount with 8" anged upper Tele-Pole™ for
RAM® vehicle mounting systems and Tough-Box™ consoles. This mount
with upper Tele-Pole™ is compatible with all RAM® lower Tele-Pole™ and
vehicle mounting systems.

MDT MOUNT W/ UPPER
TELE-POLE™& SWING ARM(S)
Swing
Part Number Placement Arm Articulation Material
Length

RAM-DIS-MDT2-8- RAM® lower 6’’ Forward Powder
SW1 Tele-Pole™ 12’’ 80° coated
RAM-DIS-MDT2-8- & vehicle Back 45° marine
SW2 mounting grade
systems aluminum
MDT DISPLAY MOUNT W/ 8’’ and steel
FLANGED UPPER
TELE-POLE™ Mobile Data Terminal display mount with 8" anged upper Tele-Pole™ and
single swing arm for RAM® vehicle mounting systems. The single swing
RAM-DIS-MDT2-8 arm allows you to twist and tilt the viewing angle of your keyboard, when
mounted to your console or vehicle system. Included is a 1.5" diameter
rubber ball connected to a at 2.5" diameter base. This mount has pre-
drilled holes, including the universal AMPS hole pattern, which will attach
to most keyboards. This mount is also compatible with all RAM® lower
Tele-Pole™ and vehicle mounting systems.

MDT MOUNT WITH UPPER TELE-POLE™

& DOUBLE SOCKET ARM MOUNT

Part Number Placement Swing Arm Articulation Material
Length

MDT DISPLAY MOUNT W/ 8’’ RAM-DIS- RAM® lower N/A Forward Powder
FLANGED UPPER TELE-POLE™ MDT2-8-101 Tele-Pole™ 80° coated
WITH SINGLE SWING ARM & vehicle Back 45° marine
mounting grade
RAM-DIS-MDT2-8-SW1 systems aluminum
and steel

Mobile Data Terminal display mount with 8’’ anged upper Tele-Pole™
and double socket arm for RAM® vehicle mounting systems. The double
socket arm mount contains two 2.5’’ diameter round bases that have pre-
drilled hole, including the universal AMPS hole pattern, which will attach
to most keyboards.

MDT MOUNT WITH UPPER TELE-POLE™ &
DOUBLE SOCKET ARM MOUNT

RAM-DIS-MDT2-8-101

MDT-MATE™ Patents and Trademarks

53www.rammount.com/IP

RAM® TABLET SOLUTIONS

TOUGH-BOX™ HOLDER SYSTEM FOR IPAD
Part Number Part Description Material

RAM-HOL-AP17U RAM® high strength High strength composite Additional Tablet
composite holder for Solutions Starting
the Apple iPad Air. on Page 9

RAM-101U-D 1.5" diameter Powder coated marine grade IPAD MOUNTING
ball mount with 2 aluminum SOLUTION FOR RAM®
quantity 2.5" round TOUGH-BOX™ CONSOLE
bases that contain
the AMPs hole
pattern.

RAM-VB-110-5U 6" single swing arm Powder coated steel
with 2.5" round base
that contains the
AMPs hole pattern.

RAM-VP-TTMF8U 8" upper male Powder coated marine grade
Tele-Pole™ with tear aluminum
drop ange.

To create the con guration displayed, you must purchase all of the
separate parts listed above. Holder shown is designed for iPad Air.
Additional tablet holders and solutions available starting on page 9.
Please visit www.rammount.com for all available holder models.

SLIDE-N-LOCK™ MOUNTS
Part Number Placement Material

RAP-315U AMPS base to 100mm High strength
VESA, 75mm VESA, composite
AMPS

Allows you to quickly connect and disconnect your VESA/AMPS
compliant keyboard or monitor to your RAM® Mounting system, and lock
in place.

DON'T SEE WHAT YOU'RE LOOKING FOR?
GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

SLIDE-N-LOCK™
MOUNTS

RAP-315U

54 VEHICLE MOUNTING CATALOG UTILITY & FLEET VEHICLES
RAMMOUNT.COM

RAM® IS THE WORLD LEADER IN
FLEET MOUNTING SOLUTIONS
FOR ALL VEHICLE SIZES

UTILITY & FLEET VEHICLES

OUTFITTING A FLEET OF VEHICLES WITH ELECTRONICS IS A SIGNIFICANT INVESTMENT
THAT NEEDS TO BE PROTECTED.

RAM® Mounts offers a wide variety of mounting solutions with an equally wide range of options
available for your specific needs. A key bene t provided with a RAM® Mount is shock absorption
which further protects the electronic devices for improved reliability and ease of adjustment for each
driver; as well as locking accessories for theft deterrence.
Choose from a wide variety of mounting solutions for all of your device needs, as well as locking,
portability, and expansion options for your existing RAM® Mounts.

Solutions for: UNIVERSAL SUN VISOR TOUGH-WEDGE™
MIRROR MOUNT
• GPS Mounts RAM-B-166-326-VIS-G1U SLIDES IN BETWEEN
• Laptop Mounts RAM-B-231Z-RVMU VEHICLE SEAT CUSHIONS
• iPad & Tablet Mounts
• iPhone & Smartphone TO CREATE STABLE
MOUNTING PLATFORM
Mounts

UTILITY & FLEET VEHICLES Patents and Trademarks

55www.rammount.com/IP

UTILITY & FLEET VEHICLE CASE STUDIES

UNITED RENTALS
MOTOROLA MC75A MOUNTING SOLUTIONS
United Rentals manages a eet of 2,000 trucks across
900 branch locations in the United States and Canada,
which transport equipment of all shapes and sizes to and
from customer sites. Recently United Rentals deployed
a sophisticated mobile solution, dubbed FAST (Field
Automation Strategy and Technology), incorporated
multiple technology solutions including Motorola MC75A
rugged handhelds with Bluetooth, wireless connectivity,
barcode scanning, and camera functionality.
RAM® Mount's custom t holder for the MC75A and
complete vehicle mounting system was chosen to provide
the durability and dependability required for the eet of
trucks.

MOST INNOVATIVE LOWE'S COMPANY
CHEVROLET ACCESSORY COMPANY SMARTPHONE USED FOR GPS
SEMA 2011 Lowe's sought out a universal mounting solution for iPhone
and Blackberry smartphones to be installed into their eet
SMARTPHONE of 5,200 vehicles.
CAR MOUNT 2013 The smartphones serve multiple functions including
navigation and bluetooth communication.
RAM® answered the challenge by providing the Universal
X-Grip® Cell Phone Holder with Twist Lock Suction Cup
Mount; an item that has quickly become one of the most
popular products for both commercial and consumer
applications.

SPOKANE SOLID WASTE

LOCKING GPS SOLUTION
Spokane Waste Management required a locking
mount for the Garmin Nuvi 265T that would allow
user adjustments yet deter theft.
Theft was a chronic problem since the GPS units are
used in view of the public every day, and tended to
be stolen when employees would leave the vehicle.
RAM® provided a custom, device speci c holder
that included the ability to lock the GPS, and secure
power cables and hardware from tampering.

Please contact fl[email protected] for more information.

56 VEHICLE MOUNTING CATALOG TOUGH-DOCK™
RAMMOUNT.COM

TOUGH-DOCK™ W/ DUAL RF PASS THROUGH

RAM® TOUGH-DOCK™ POWERED DOCKING STATION WITH PORT REPLICATION FOR
PANASONIC TOUGHBOOK® CF-28, CF-29,
CF-30 AND CF-31

RAM® offers the most cost effective solution for docking your Panasonic Toughbook. RAM® created
the perfect balance between weight, features, ergonomics and cost ensuring the best possible solution
for your docking needs. The RAM® Tough-Dock™ is the industry’s rst injection molded docking station
for the Toughbook.
Compatible with all MK versions of the CF-28, 29, 30 and 31, RAM® is the only Toughbook docking
station that will work across your entire mixed eet of laptops. With an integrated power supply, 5QTY
USB, included screen support, lock and much more, the RAM® Tough-Dock™ is the most well rounded
docking solution available

FEATURES: • Integrated screen support • External fuse
• Overcurrent / surge • External power switch
• Available with single or dual • Docked/powered LED
RF pass through protection
• Reverse polarity protection indicators
• Integrated power supply • Radio frequency isolation
• Tamper proof lock • Military grade construction
• 12-30 Volt DC input

TOUGH-DOCK™ Patents and Trademarks

57www.rammount.com/IP

TOUGH-DOCK™

CF-31 DOCKING STATION
Part Number Placement Material

RAM-234-PAN1P-2RF In Vehicle High strength
(Dual RF Pass Through) composite enclosure
RAM-234-PAN1P
(Single RF Pass
Through)

RAM® Tough-Dock™ Powered Docking Station with port replication for
Panasonic Toughbook® CF-28, CF-29, CF-30 and CF-31 rugged laptops.
Also available in Single Pass Through Model (RAM-234-PAN1P).

Warranty Information: TOUGH-DOCK™ WITH
3 year warranty on electrical and electronic parts PORT REPLICATION/DUAL
Lifetime warranty on mechanical parts RF PASS THROUGH

TOUGHBOOK 52 DOCKING STATION RAM-234-PAN1P-2RF
Part Number Placement Material
TOUGHBOOK 52
RAM-234-PAN7P In vehicle High strength DOCKING STATION
composite enclosure
RAM-234-PAN7P
RAM® Tough-Dock™ Powered Dock with port replication for the
Panasonic Toughbook® CF-52. CF-U1 DOCKING STATION

Standard Features: Port Replication: RAM-HOL-PAN4PU
Integrated power supply (1 qty) RJ-45 LAN
Tamper proof lock (2 qty) DC input
12-30 Volt DC input (4 qty) USB 2.0 on replicator board
Integrated screen support (1 qty) USB 2.0 on front of dock
Overcurrent / surge protection (1 qty) VGA output
Reverse polarity protection (1 qty) DB-9 serial connection
Radio frequency isolation (1 qty) Speaker out
Military grade construction

CF-U1 DOCKING STATION
Part Number Placement Material

RAM-HOL-PAN4PU In vehicle High strength
composite enclosure

RAM® Tough-Dock™ Powered Dock with port replication for the
Panasonic Toughbook® CF-U1.

Standard Features:
DB9
VGA out
RJ-45
(5 qty) USB
Dual RF pass through
DC input
Cable tie slots

GETAC DOCKING STATION Material
Part Number Placement

RAM-HOL-GET1PU In vehicle High strength
composite

RAM® Powered Dock For The Getac E100 & Getac 840XT by Tablet Kiosk.
The RAM-HOL-GET1PU has the ability to be locked.

GETAC DOCKING STATION

RAM-HOL-GET1PU

58 VEHICLE MOUNTING CATALOG PRINTER MOUNTS
RAMMOUNT.COM

PRINTER MOUNTS

BROTHER POCKETJET SERIES
PRINTER HOLDER
Part Number Placement Material

RAM-VPR-101 The bottom of the RAM- High strength
VPR-101 tray attaches to the composite
RAM® 1.5’’ diameter ball, 2.5’’
BROTHER POCKETJET round base
SERIES PRINTER HOLDER
The RAM-VPR-101 is designed to hold Brother® PocketJet® Series
RAM-VPR-101 portable printers. A custom t enclosure, the holder is form tting with no
sharp edges and adds little to the overall size of the printer. Key features
are full view of LED's, sight hole to check paper level, and a caddy to store
pens, cell phone, paper clips, glasses and other useful items. Complete
kits are available as stand alone systems or integrated with your existing
RAM® products.

CANON PORTABLE SERIES
PRINTER MOUNTING KIT
Part Number Clamping Dimensions Material

RAM-VPR-102 Width: Min 8” to Max 14.5” Powder coated
Height: Max 1.75” marine grade
aluminum

CANON PORTABLE SERIES The RAM-VPR-102 is designed to hold Canon BJC-85 portable printers.
PRINTER MOUNTING KIT The holder uses a unique patent pending spring loaded mechanism that
holds strong, yet provides easy removal for printer storage. At each end of
RAM-VPR-102 the spring loaded holder are small side clamp plates that are designed to

t cleanly around either edge of the printer. Complete kits are available as
stand alone systems or integrated with your existing RAM® products.

RAM® ALSO MAKES PRINTER MOUNTS FOR:

EPSON DATAMAX-O'NEIL

FUJITSU PENTAX

INTERMEC ZEBRA AND MORE

RAM® Printer Holder for the
Brother RuggedJet™ RJ-4030 &RJ-4040

RAM-VPR-106

PRINTER MOUNTS Patents and Trademarks

59www.rammount.com/IP

PRINTER MOUNTS

HP DESKJET PORTABLE PRINTER HOLDER

Part Number Clamping Dimensions Material

RAM-VPR-103 Width: Min 9” to Max 15.5” Powder coated marine
Height: Max 2.5” grade aluminum

The RAM-VPR-103 is designed to hold HP Of cejet 100 portable printers, HP DESKJET 450 SERIES
but will also hold any printer within the listed clamping dimensions. The PRINTER HOLDER
holder uses a unique patent pending spring loaded mechanism that holds
strong, yet provides easy removal for printer storage. At each end of the RAM-VPR-103
spring loaded holder are small side clamp plates that are designed to t
cleanly around either edge of the printer. Complete kits are available as
stand alone systems or integrated with your existing RAM® products.

HP DESKJET PORTABLE PRINTER HOLDER

Part Number Clamping Dimensions Material

RAM-VPR-103-1 Width: Min 9” to Max 15.5” Powder coated marine
Height: Max 2.5” grade aluminum

The RAM-VPR-103-1 is designed to hold HP DeskJet 450 and 470 portable HP DESKJET 450 SERIES
printers, but will also hold any printer within the listed clamping dimensions PRINTER HOLDER
The holder uses a unique patent pending spring loaded mechanism that
holds strong, yet provides easy removal for printer storage. At each end of RAM-VPR-103-1
the spring loaded holder are small side clamp plates that are designed to
PRINTER HOLDER FOR THE
t cleanly around either edge of the printer. Included is a standard length BROTHER RUGGEDJET™
arm and round pipe base, which will connect to any RAM® Tele-Pole™ and RJ-4030 & RJ-4040
other poles with a diameter from 1.25" to 1.88".
RAM-VPR-106
PRINTER HOLDER FOR
BROTHER RUGGEDJET™ RJ-4030 & RJ-4040
Part Number Clamping Dimensions Material

RAM-VPR-106 Made for Brother RuggedJet™ High strength
RJ-4030 & RJ-4040 composite

The RAM Printer Mount for the Brother RuggedJet™ 4 is ideally suited to
help create the optimum mobile of ce environment, regardless of vehicle
or application. Our form t design has no sharp edges and adds little
to the overall size of the printer. After all, one of the key features of the
RuggedJet™ 4 is its size. Why purchase a bulky mount made from metal
when RAM has the ideal solution both low pro le and durable? Multiple
mounting options are available to accommodate a wide variety of mounting
con gurations. RAM enables mounting of the printer where it is best for
you, not where it is best for the mount.

UNIVERSAL THERMAL PRINTER MOUNTS
Part Number Clamping Dimensions Material

RAM-VPR-104 Width: Min 5.625” to Max 9.5” Powder coated marine
Height: Max 1.75” grade aluminum

RAM-VPR-105 Width: Min 6.625” to Max 10.5 Powder coated marine
Height: Max 2.5” grade aluminum

The RAM-VPR-104 and RAM-VPR-105 are designed to hold small UNIVERSAL SMALL
portable printers. The holder uses a unique patent pending spring loaded PORTABLE PRINTER
mechanism that holds strong, yet provides easy removal for printer storage. HOLDER
At each end of the spring loaded holder are small side clamp plates that
are designed to t cleanly around either edge of the printer. Complete kits RAM-VPR-104
are available as stand alone systems or integrate with your existing RAM®
products.

60 VEHICLE MOUNTING CATALOG PRINTER & KEYBOARD MOUNTS
RAMMOUNT.COM

PRINTER & KEYBOARD MOUNTS

ZEBRA RW 420 PRINTER MOUNTS
Part Number Placement Material

RAM-202U RAM® adapter plate and 1.5’’
ball for the Zebra RW420. This
mount is compatible with the Powder coated marine
Zebra vehicle dock for the grade aluminum
RW420 which features the
universal AMPS hole pattern.

RAM-316-1-202U RAM POD I, universal No-
Drill™ vehicle mount for the
Zebra RW 420 (not shown)

RAP-365-101U RAP-365-101U Triple suction cup mount for High strength composite
the Zebra RW420 (shown) and powder coated
AMPS UNIVERSAL
HOLE PATTERN marine grade aluminum
MOUNT
Considering all the uses for the Zebra RW 420 printer, it is assuring to know that RAM® has a
RAM-202U mount ready made for your application no matter where it is. With a broad range of functionality

and capabilities, the Zebra RW 420 nds its way into markets ranging from consumer to industrial

and RAM® has a mounting solution for these and everything in between. RAM’s innovative
solutions allow you to mount the Zebra RW 420 into tight spaces or simply put it where it is

always within easy reach. Like the Zebra RW420, RAM® Mounts are modular in design allowing
you the freedom to create the product that is best for your work station or vehicle. If you’ve

chosen the Zebra RW 420 for its ease of use while on the go, don’t settle for a restrictive

mounting product. RAM’s patented designs take the features you love in your Zebra printer and

put them right where you need them.

KEYBOARD MOUNTS
Part Number Description Placement Material

RAM-202U The marine grade The RAM-202U Powder coated
aluminum base attaches to the marine grade
Includes a 1.5’’ underside of
diameter rubber ball keyboards aluminum
connected to a flat that contain the
2.5’’ diameter base. universal AMPS
This mount features hole
the universal AMPS pattern. It also is
hole pattern. compatible with all
1.5’’ socket arms
and
mounts.

RAM-B-101U RAM-B-108U RAM-101U Includes a double The RAM-101U
RAM-108U socket arm and two attaches to
2.5" diameter round the underside Powder coated
bases that contain the of keyboards marine grade
universal AMPS hole that contain the
pattern. The mount is universal AMPS aluminum
designed with a 1.5" hole pattern. It
ROTO-VIEW™ FOR diameter patented also is compatible
TABLETS W/ KEYBOARD rubber ball and socket with all
ACCESSORY system that has 1.5’’ socket arms
adjustment points and mounts.
RAM-TAB-KEY1-300U at both ends of the The RAM-202U
double socket arm. attaches to
The RAM-108U the underside
consists of a double of keyboards
socket arm, 2.5" that contain the
diameter round base universal AMPS
that contains the hole pattern.
universal AMPS hole The strap can
pattern and single mount to all RAM®
strap base. The strap Tele-Pole™ and
will accommodate other poles with a
rails from 0.5" to 2" in diameter from .5’’
diameter. to 2’’.

RAP-TAB-KEY1- Keyboard accessory Multiple High strength
300U for tablets with Roto- configurations composite &
View™. available, please powder coated
reference marine grade
rammount.com
for all possible aluminum
mounting
solutions.

ACCESSORIES Patents and Trademarks

61www.rammount.com/IP

ACCESSORIES

TOUGH-HUB™

Part Number Placement Material
RAM-234-HUB1 Secure using mounting High strength
points on the exterior composite
four corners, or the 75
x 75mm VESA hole
pattern for mount
integration.

The Tough-Hub™ is an easy-to-use USB Hub offering quick access to
USB ports and Internet connection for your various devices. Integrated
cable strain relief assures your connection is solid even in rough
environments. Ignition trigger can be set to supply power to connected
devices for a set amount of time after the vehicle ignition is turned off.
Notes & Features:
(6) Qty. 5v powered USB 2.0 ports
(1) Qty. 10/100 MBPS ethernet port
Threaded power input for 12-48 VDC input
Strain relief connection points
Ignition trigger

SAFE-T-CHARGE™ VEHICLE
CHARGE PROTECTION

Part Number Placement Material TOUGH-HUB™

RAM-234-VCP1U Any at surface Flame retardant ABS RAM-234-HUB1U
construction
SAFE-T-CHARGE™
The RAM® Safe-T-Charge™ is feature rich and affordable making it the
best choice in protecting your vehicle or boat’s electrical system and RAM-234-VCP1U
battery. With multiple con gurations available through onboard dip
switches, the Safe-T-Charge™ can be con gured to shut down connected DC-DC POWER ADAPTER
devices either by a trigger from the ignition of the vehicle or by sensing a
drop in the DC voltage below a level capable of starting your engine. The RAM-234-PB1U
device offers an audible tone starting 5 minutes before the timer shuts
off power to your devices, and continues every minute until the power is
shut down. The on board over-ride switch enables the user to bypass the
timed shut off feature in case of an emergency or other event that requires
immediate access to device power.

Notes & Features:
Weatherproof
30AMP rating
24V jump start protection
DC voltage dip or IGN trigger sensor switch on board
Build in override switch

DC-DC POWER ADAPTER Material
Part Number Placement

RAM-234-PB1U Attaches to square High strength
plate with 75x75mm composite
holes at
each corner

The RAM® Power Adapter contains 6 voltage outputs that can be
achieved to make sure your device is getting exactly the right amount
of juice. With a power input range of 12 to 28 volts DC, your sure to nd
multiple uses for yet another great RAM® accessory.

DON'T SEE WHAT YOU'RE LOOKING FOR?

GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

62 VEHICLE MOUNTING CATALOG ACCESSORIES
RAMMOUNT.COM

ACCESSORIES

POWER CADDY™ Material
Part Number Placement

RAM-234-5U Attaches to the back of High strength
the RAM® Tough-Tray™ composite

POWER CADDY™ This RAM Power Caddy™ allows Specifications:
for power supply storage to be Width: 8.1875’’. Height” 3.0625’’.
RAM-234-5U contained alongside your laptop. External Depth: 1.6875”. Internal
Keep your laptop charged and Depth: 1.4375’’. Weight: 0.30lbs.
SCREEN SUPPORT utilize additional peripherals like Compatible Mounts:
printers and fax machines. Utilize RAM-234-3
RAM-234-S2U your own factory supplied power RAM-2343FL
supply or combinations of most RAM-234-3K1
USB LIGHT after-market AC inverters, DC
power supplies and or AC/DC
RAM-234-LU power adapters.

SCREEN SUPPORT
Part Number Placement Material

RAM-234-S2U Attaches to the side of High strength
the RAM® Tough-Tray™ composite
& Tough-Tray™ II

RAM® Screen Support with spring Compatible Mounts:
loaded keeper; this allows it to RAM-234-3
travel smoothly with the screen RAM-2343FL
through numerous viewing angles. RAM-234-3K1
Stores easily when not in use. RAM-234-6

Dimensions:
Total Length: 8.75"
Point Pivot to the end: 8"

FLEXIBLE USB POWERED TRAVEL LIGHT
Part Number Placement Material

RAM-234LU Attaches to a spare USB High strength
port and then angles over composite
keyboard

The USB powered laptop light Specifications:
includes a exible 11.5” long arm and Total Length: 15.5’’
a 2” long pointed globe light. This is Light Length: 2’’
the perfect solution for hard to see Flex Arm Length: 11.5’’
situations, such as in an airplane or USB Length: 2’’
vehicle.

UNIVERSAL LAPTOP TOUGH-TRAY™
FLAT CLAMPING ARM KIT
Part Number Placement Material
FLAT SIDE KEEPERS 
RAM-234K1-4U (Qty. 4) Attaches to the sides of the High strength
RAM-234K1-4U RAM-234K1U (Qty. 1) RAM® Tough-Tray™ composite

Want to close your laptop screen when Compatible Mounts:
mounted in the RAM-234-3 Tough-Tray™? RAM-234-3
Here are the side legs you need. Just swap
out the existing arms you have with this
pack of four at side keepers.

ACCESSORIES Patents and Trademarks

63www.rammount.com/IP

ACCESSORIES

24" SUPPORT LEG FOR LOWER TELE-POLE™
Part Number Placement Material

RAM-VB-SL24 Attaches to any lower High strength composite
Tele-Pole™ and aluminum

The perfect compliment to the popular No-Drill™ line of products is our ADJUSTABLE
adjustable support leg. Simple to install, this versatile accessory can STABILIZER LEG
be used as a No-Drill™ or a bolt down option. If the mounted device is
heavier than normal, this stabilizer is a simple solution to add rigidity to RAM-VB-SL24
your laptop mounting system.

STABILIZER FOOT
Part Number Placement Material

RAM-FOOT2 Attaches to select High strength
RAM® Vehicle Base composite and steel
Systems

RAM® stabilization foot for vehicle bases. Add ultimate strength and
stabilization with the RAM-FOOT2 for your mobile environment.

MULTI-PAD™ Placement Material STABILIZER FOOT

Part Number RAM-FOOT2

RAM-B-102-MP1U Attaches to RAM® High strength MULTI-PAD™
Tough-Tray™ & composite and
Tough-Tray™II powder coated marine RAM-B-102-MP1U
grade aluminum BEST CAR

The RAM® Multi-Pad™ is the perfect product to keep your busy life ACCESSORY
organized. Easily mounted in a variety of locations and ideal for your car 2013
or truck, the RAM® Multi-Pad™ has many features you’d expect and
others that will surprise you. With RAM® in the name, you know the RAM® SMARTPHONE HOLDER
Multi-Pad™ can be easily attached to a wide variety of RAM® mounting
solutions. With several mounting points and integrated magnets for RAM-B-102-UN7U
holding your ferrous metal pen securely without the need for clips, the
RAM® Multi-Pad™ is ready to get to work for you. The Multi-Pad™ can
attach to the RAM® Tough-Tray™ universal laptop holder.

UNIVERSAL X-GRIP® SMARTPHONE HOLDER
FOR TOUGH-TRAY™
Part Number Placement Material

RAM-B-102-UN7U Attaches to RAM® High strength
Tough-Tray™ & Tough- composite and
Tray™II powder coated marine
grade aluminum

This kit includes everything you need to mount your smartphone securely
next to your laptop. It Includes a diamond base, double socket arm and
universal spring loaded X-Grip® holder for cell phones. With a twist of the
arm knob, you can move the X-Grip® mount to your optimum viewing
position. The 2.43” x 1.31” diamond base has two holes 1.912” from
center to center and matches the industry standard AMPS hole pattern.

64 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

*

DISPLAYING THE DURABILITY OF THE
RAM® TOUGH-BOX™ CONSOLE SYSTEM*

*PLEASE DO NOT ATTEMPT
WITH ANY RAM® EQUIPMENT

TOUGH-BOX™ CONSOLES

UP TO 30% LIGHTER THAN OTHER MANUFACTURER’S CONSOLES, THE RAM®
DESIGN IS JUST AS FUNCTIONAL AND DURABLE BUT WITHOUT ALL THAT FUEL

ROBBING WEIGHT.

Constructed of high strength composite, steel, and marine grade aluminum;
materials are meticulously chosen to ensure long product live and exceptional
performance. Another key feature is the incorporation of molded parts to create
the tightest of seams and the elimination of sharp corners or edges.
Keeping in mind the safety of the vehicle occupants and ease of use and
installation, these consoles are crafted to meet and exceed expectations. The
RAM® Tough-Box™ consoles set the bar for a industry standard. No eet should
consider up- tting their eet with anything less than the best, RAM®.

INDUSTRY FIRSTS:

✔ No Sharp Edges
✔ Molded Faceplates with Tongue & Groove Details
✔ Con gurable Console with 1 SKU, 3 different Lengths

TOUGH-BOX™ Patents and Trademarks

FEATURES • Unique molded faceplates 65www.rammount.com/IP
incorporate tongue and
• Combination of rugged groove details to prevent • Modular design allows for
materials to create the contamination of electronics almost unlimited installation
ultimate in toughness and from dust and dirt falling options. 9”, 13”, 17” and 21”
industry leading light weight through the cracks. This also models available to meet
design. integrates all the combined your needs.
faceplates together as a unit
• Unique molded console to provide more strength, • Several knockout panels
design sets a standard for plus they prevent lost cards, on each side for 12V or
ergonomics and safety. licenses and paperwork. cigarette adapters.

• No sharp edges or corners • High quality materials and • Large openings with smooth
ensure occupant safety and nish ensure a long product corners at each end of
provide a state of the art console provide tunnel pass
appearance. life and corrosion resistance through for trouble free
backed by renowned NPI wiring.
lifetime warranty.

• Microphone hole and slot • Mounting holes in bottom of • Integrated hole patterns
pattern available on both console work with all other such as AMPS, VESA,
passenger and driver side of manufacturers’ top plates. as well as RAM® speci c
console. ensure endless mounting
• Compatible with RAM® 1 possibilities and the ultimate
• Molded and stamped inch and ½ inch pedestal in versatility.
mounting holes allow for systems.
extreme ease of assembly • An installers dream, the
and installation. • Unique die cast interlocking RAM® Twist-Lock™ feature
faceplates are rigid and allows for quick access to
tough, not imsy and radios or switches making
exible. Also no welds to installation, change-outs or
break. repairs simpler than ever.

66 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 1: CONSOLE LEG KITS
Police, fire, and rescue vehicles are well represented in the RAM®
leg kit line-up. Most are available in a No-Drill™ option, installation is
straightforward and once completed, you’ll have a rock solid platform
for all your RAM® products!

FORD VEHICLE LEG KIT Drilling Required
Part Number Placement No - attaches Material
to seat bolts Powder
RAM-VC-LEG-101 Over transmission coated
hump. Attaches to 23’’ steel
and 29’’ top plates

Compatible Vehicles: Installation Instructions:
Ford Crown Vic/Police http://www.rammount.com/
Interceptor (1991-2011) SupportCenter

FORD LEG KIT FORD VEHICLE LEG KIT
Part Number Placement Drilling Required Material
RAM-VC-LEG-101
RAM-VC-LEG-102 Over transmission No - attaches Powder
FORD LEG KIT hump. Attaches to to seat bolts coated steel
23’’ and 29’’ top
RAM-VC-LEG-102 plates

CHEVROLET/GMC LEG KIT Compatible Vehicles: Installation Instructions:
Ford F-150 (1997-2003 & Heritage http://www.rammount.com/
RAM-VC-LEG-103 Model) SupportCenter
Ford F-250, Light Duty (1997-2004)
Ford Expedition (1997-2006)

CHEVROLET/GMC VEHICLE LEG KIT

Part Number Placement Drilling Required Material

RAM-VC- Over transmission No - attaches to Powder
LEG-103 hump. Attaches to seat bolts coated
23’’ and 29’’ top steel
plates

Compatible Vehicles: Installation Instructions:
Chevrolet Avalanche (2002-2008) http://www.rammount.com/
Chevrolet 1500/2500/3500 C/K SupportCenter
(1999-2008)
Chevrolet Silverado (1999-2008)
Chevrolet Suburban (2000-2006)
Chevrolet Tahoe (2000-2010)
GMC Sierra (2000-2008)
GMC Yukon/Yukon XL (2000-2008)

DON'T SEE WHAT YOU'RE LOOKING FOR?

GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

TOUGH-BOX™ Patents and Trademarks

67www.rammount.com/IP

STEP 1: CONSOLE LEG KITS

UNIVERSAL LEG KIT FOR ALL VEHICLES
Part Number Placement Drilling Required Material

RAM-VC-LEG-104 Over transmission Yes Powder
hump. Attaches to coated steel
23’’ and 29’’ top
plates

Compatible Vehicles: Installation Instructions: BUCKET SEAT
Universal (All vehicles with bucket seats) http://www.rammount.com/ UNIVERSAL LEGS
SupportCenter
RAM-VC-LEG-104
CHEVROLET VEHICLE LEG KIT Material
Part Number Placement Drilling Required Powder CHEVROLET LEG KIT
coated steel FOR IMPALA
RAM-VC- Over transmission No - attaches to
LEG-105 hump. Attaches to seat bolts RAM-VC-LEG-105
23’’ and 29’’ top
plates

Compatible Vehicles: Installation Instructions:
Chevrolet Impala (2006-2012) http://www.rammount.com/
SupportCenter

FORD VEHICLE LEG KIT
Part Number Placement Drilling Required Material
No - attaches to Powder
RAM- VC- Over transmission seat bolts coated steel
LEG-106 hump. Attaches to
23’’ and 29’’ top
plates

Compatible Vehicles: Installation Instructions:
Ford F-150 (2004-2010) http://www.rammount.com/
SupportCenter

FORD LEG KIT FOR F-150

RAM-VC-LEG-106

CHEVROLET VEHICLE LEG KIT
Part Number Placement Drilling Required Material

RAM-VC-LEG-107 Over transmission No - attaches Powder
hump. Attaches to 23’’ to seat bolts coated
and 29’’ top plates steel CHEVROLET LEG KIT
FOR IMPALA POLICE
Compatible Vehicles: Installation Instructions:
Chevrolet Impala Police Package http://www.rammount.com/ RAM-VC-LEG-107
(2006-2011) SupportCenter

68 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 1: CONSOLE LEG KITS

FORD VEHICLE LEG KIT Drilling Required Material
Part Number Placement

RAM-VC- Over transmission No - attaches to Powder
LEG-108 hump. Attaches seat bolts coated steel
to 23’’ and 29’’
top plates

FORD LEG KIT FOR Compatible Vehicles: Installation Instructions:
EXCURSION & F250-F750 Ford Excursion (2000-2005) http://www.rammount.com/
Ford F-250 to 750, Super Duty (1999- SupportCenter
RAM-VC-LEG-108 2010)

DODGE LEG KIT FOR DODGE VEHICLES LEG KIT
CHARGER & MAGNUM Part Number Placement Drilling Required Material

RAM-VC-LEG-109 RAM-VC-LEG-109 Over transmission No - attaches Powder
hump. Attaches to seat bolts coated steel
DODGE LEG KIT FOR to 23’’ and 29’’
POLICE CHARGER top plates

RAM-VC-LEG-112 Compatible Vehicles: Installation Instructions:
Dodge Charger (2005-2010) http://www.rammount.com/
Dodge Magnum (2006-2010) SupportCenter

DODGE VEHICLES LEG KIT
Part Number Placement Drilling Required Material
Powder
RAM-VC- Attaches to seat No - attaches to coated steel
LEG-112 bolt seat bolts

Compatible Vehicles: Installation Instructions:
Dodge Police Charger (2007-2014) http://www.rammount.com/
SupportCenter

CHEVROLET VEHICLES LEG KIT
Part Number Placement Drilling Required Material
Powder
RAM-VC-LEG-110 Attaches to seat No - attaches coated steel
bolt to seat bolts

Compatible Vehicles: Installation Instructions:
Chevrolet Suburban (2010-2014) http://www.rammount.com/
Chevrolet Tahoe (2010-2014) SupportCenter
GMC Yukon (2010-2014)
GMC Yukon XL (2010-2014)

CHEVY LEG KIT FOR
SUBURBAN, TAHOE, YUKON

RAM-VC-LEG-110

TOUGH-BOX™ Patents and Trademarks

69www.rammount.com/IP

STEP 2: CONSOLE FACEPLATES Industry 1st!
Die cast and cut to your specifications, RAM® faceplates are simply the best Molded Faceplates with
faceplates available. The lightweight yet strong design is ideally suited to the most Tongue & Groove details
demanding of applications. The innovative tongue and groove feature keeps the
inside of the console free of contaminates as well as provides a rock solid system
once installed into the RAM® Tough-Box™ Console. Also, faceplates make use of the
patented RAM® Twist-Lock™ feature which can be loosened to quickly and easily
service electronics or swap out old devices.

FACEPLATE SIZING DIMENSIONS 9”
FOR STANDARD BOXES
Part “B” Rear “C” Front A
Number Total Faceplate Size Height Range Height Range C B

RAM-VC-9 7’’

RAM- 11’’ 6’’ - 10’’ 7.25’’ - 11.25’’
VC-13 15’’
RAM-
VC-17

RAM- 19’’
VC-21

FACEPLATE SIZING DIMENSIONS 9” COMBINED FACEPLATE
FOR ANGLED BOXES THIS SECTION OF CONSOLE
Overall Length Front Height Rear Height
COMBINED
Full Length = 23.75’’ FACEPLATE SIZE THIS
SECTION NO CUT 9”
CUT A=4”, CUT B=0”

Cut “A” = 18.75’’ 8.2" 4.12"

Cut “B” = 14.75’’ FULL LENGTH = 23.75” 4.12”
CUT A+ 18.75” 9.4”
CUT B + 14.75”

CUT CUT
B A

TOUGH-BOX™ CONSOLE 3" FILLER FACE PLATE 6" FILLER FACE PLATE
CUSTOM 3" FACEPLATE
RAM-FP-3-FILLER RAM-FP-6-FILLER
RAM-FP3-5700-1850

DON'T SEE WHAT YOU'RE LOOKING FOR?
GO TO WWW.RAMMOUNT.COM FOR THE LATEST
INFORMATION AS THIS PRODUCT LINE IS CONSTANTLY

EVOLVING!

70 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 3: CONSOLE BOXES

FEATURES:

• Combination of rugged materials create the ultimate in toughness and
lightweight design.

• First molded console in the industry.
• Cut to length feature allows the installer unmatched options. One part

number can be made to t a wide range of vehicle sizes.
• No sharp edges or corners ensure occupant safety and provide state of

the art appearance. Tight seams equal no more lost cards or licenses.
• High quality materials and nish ensure long product life and corrosion

resistance backed by renowned NPI Lifetime Warranty.
• Several knockout panels on each side for 12V or cigarette adapters.
• Large contoured tunnel pass through at each end of console for trouble-

free wiring.
• Light mount hole pattern available on both passenger and driver side of

console.
• Molded and stamped mounting holes allow for extreme ease of assembly

and installation.
• Mounting holes in bottom of console work with several other

manufacturers’ top plates.
• Compatible with 1’’ and 1.5’’ pedestal systems.
• Integrated hole patterns such as AMPS, VESA, as well as RAM® speci c

ensure endless mounting possibilities and the ultimate in versatility.
• Modular design allows for almost unlimited installation options. 9’’, 13’’,

17’’ and 21’’ models available to meet your needs.

DIMENSIONS:

RAM® Tough-Box™ angled
consoles provide multiple
length choices using just one
console model. To make the
appropriate length console, use a
hack saw and cut the plastic rails prior
to assembly at either position A or B,
then bend back and break the steel sides
in at the same matching A or B location.

For consoles with the 23.75’’ length, you won’t
be required to make any cuts or breaks. Assemble the
console using the assembly instructions provided with the
console purchase or download a copy at www.rammount.com.

TOUGH-BOX™ Patents and Trademarks

71www.rammount.com/IP

STEP 3: CONSOLE BOXES

ANGLED TOUGH-BOX™ CONSOLE FOR ALL VEHICLES (UNIVERSAL)
Exterior Box
Part Number Placement Length Height Pole Material

RAM-VCA- Attaches to No Cut = 23.75’’ 8.2’’ Not High strength composite
101NP RAM® console Cut A = 18.75’’ included & steel
Included
RAM-VCA-101 top plates Cut B = 14.75’’

Compatible Vehicles:
Universal (All vehicles with bucket seats)

Compatible Top Plates:
RAM-VC-TP-23, RAM-VC-TP-29

ANGLED TOUGH-BOX™ CONSOLE FOR THE FORD CROWN VICTORIA
Part Number Placement Exterior Box Length Height Pole Material

RAM-VCA- Attaches No Cut = 23.75’’ 8.2’’ Not High strength composite
102NP to RAM® Cut A = 18.75’’ included & steel
RAM-VCA-102 console top Cut B = 14.75’’ Included
plates

Compatible Vehicles: The RAM-VCA-102 includes two female Tele-
Ford Crown Victoria / Police Interceptor (1991- Pole™ bases that are mounted ush to the box,
2011) allowing for attachment of an upper Tele-Pole™
Compatible Top Plates: to support swing arms and laptop/tablet/netbook
RAM-VC-TP-23, RAM-VC-TP-29 holders.

ANGLED TOUGH-BOX™ CONSOLE FOR THE CHEVROLET IMPALA
Part Number Placement Exterior Box Length Height Pole Material

RAM-VCA- Attaches No Cut = 23.75’’ 8.2’’ Not High Strength
103NP to RAM® Cut A = 18.75’’ included Composite
RAM-VCA-103 console top Cut B = 14.75’’ Included & Steel
plates

Compatible Vehicles: The RAM-VCA-103 includes two female Tele-
Chevrolet Impala Police Package (2006-2010) Pole™ bases that are mounted ush to the box,
Compatible Top Plates: allowing for attachment of an upper Tele-Pole™
RAM-VC-TP-23, RAM-VC-TP-29 to support swing arms and laptop/tablet/netbook
holders.

UNIVERSAL ANGLED FORD CROWN CHEVROLET IMPALA
TOUGH-BOX™ VICTORIA ANGLED ANGLED CONSOLES
CONSOLE
CONSOLES RAM-VCA-103
RAM-VCA-101
RAM-VCA-102

DON’T SEE YOUR VEHICLE GO TO WWW.RAMMOUNT.COM
OR MODEL YEAR LISTED FOR THE LATEST INFORMATION
HERE? AS THIS PRODUCT LINE IS
CONSTANTLY EVOLVING!

72 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 3: CONSOLE BOXES

STANDARD 9’’ TOUGH-BOX™ CONSOLE
Part Number Placement Height Width Length Weight Material

RAM-VC-9 Attaches 7.56’’ 9’’ 9’’ 8.7lbs High
RAM-VC-9NB to RAM® - 11.5’’ 8.7lbs strength
console composite
top plates & steel

STANDARD 9’’ Interior Dimensions: The RAM-VC-9NB Tough-Box™
TOUGH-BOX™ CONSOLE 7’’, compatible with 2 to 3 radios/ is not supplied with a base for
controls heads/switches mounting top plates.
RAM-VC-9

STANDARD 13’’ TOUGH-BOX™ CONSOLE
Part Number Placement Height Width Length Weight Material

RAM-VC-13 Attaches 7.56’’ 12lbs High
to RAM® - 9’’ 11lbs strength
RAM-VC-13NB console top 11.5’’ 13’ composite
& steel
plates

Interior Dimensions: The RAM-VC-13NB Tough-Box™
11’’, compatible with 3 to 4 radios/ is not supplied with a base for
controls heads/switches mounting top plates.

STANDARD 13’’ STANDARD 17’’ TOUGH-BOX™ CONSOLE
TOUGH-BOX™ CONSOLE

RAM-VC-13

Part Number Placement Height Width Length Weight Material

RAM-VC-17 Attaches 7.56’’ 15lbs High
to RAM® - 9’’ 14lbs strength
RAM-VC-17NB console top 11.5’’ 17’ composite
& steel
plates

Interior Dimensions: The RAM-VC-17NB Tough-Box™
15’’, compatible with 4 to 6 radios/ is not supplied with a base for
controls heads/switches mounting top plates.

STANDARD 17’’ STANDARD 21’’ TOUGH-BOX™ CONSOLE
TOUGH-BOX™ CONSOLE Part Number Placement Height Width Length Weight Material

RAM-VC-17 RAM-VC-21 Attaches 7.56’’ 18lbs High
- 9’’ 17lbs strength
RAM-VC-21NB to RAM® 11.5’’ 21’ composite
console top & steel
plates

Interior Dimensions: The RAM-VC-21NB Tough-Box™
19’’, compatible with 5 to 7 radios/ is not supplied with a base for
controls heads/switches mounting top plates.

DON'T SEE WHAT YOU'RE LOOKING FOR?
GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

STANDARD 21’’
TOUGH-BOX™ CONSOLE

RAM-VC-21

TOUGH-BOX™ Patents and Trademarks

73www.rammount.com/IP

STEP 4: LAPTOP, TABLET, MDT & KEYBOARDS

74 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

MDT-MATE™

MDT MOUNT WITH UPPER TELE-POLE™
Part Number Placement Swing Arm Length Articulation Material

RAM-DIS- RAM® N/A Forward Powder
MDT2-8 lower Tele- 80° coated
Pole™ & Back 45° marine
vehicle grade
mounting aluminum
systems and steel

Mobile Data Terminal display mount with 8" anged upper Tele-Pole™ for
RAM® vehicle mounting systems and Tough-Box™ consoles. This mount
with upper Tele-Pole™ is compatible with all RAM® lower Tele-Pole™ and
vehicle mounting systems.

MDT MOUNT W/ UPPER
TELE-POLE™& SWING ARM(S)
Swing
Part Number Placement Arm Articulation Material
Length

RAM-DIS-MDT2-8- RAM® lower 6’’ Forward Powder
SW1 Tele-Pole™ 12’’ 80° coated
RAM-DIS-MDT2-8- & vehicle Back 45° marine
MDT DISPLAY MOUNT W/ 8’’ SW2 mounting grade
FLANGED UPPER TELE-POLE™ systems aluminum
and steel
RAM-DIS-MDT2-8
Mobile Data Terminal display mount with 8" anged upper Tele-Pole™ and
single swing arm for RAM® vehicle mounting systems. The single swing
arm allows you to twist and tilt the viewing angle of your keyboard, when
mounted to your console or vehicle system. Included is a 1.5" diameter
rubber ball connected to a at 2.5" diameter base. This mount has pre-
drilled holes, including the universal AMPS hole pattern, which will attach
to most keyboards. This mount is also compatible with all RAM® lower
Tele-Pole™ and vehicle mounting systems.

MDT MOUNT WITH UPPER TELE-POLE™
& DOUBLE SOCKET ARM MOUNT
MDT DISPLAY MOUNT W/ 8’’ Swing Arm
FLANGED UPPER TELE-POLE™ Part Number Placement Length Articulation Material
WITH SINGLE SWING ARM
RAM-DIS- RAM® lower N/A Forward Powder
RAM-DIS-MDT2-8-SW1 MDT2-8-101 Tele-Pole™ 80° coated
& vehicle Back 45° marine
mounting grade
systems aluminum
and steel

Mobile Data Terminal display mount with 8’’ anged upper Tele-Pole™
and double socket arm for RAM® vehicle mounting systems. The double
socket arm mount contains two 2.5’’ diameter round bases that have pre-
drilled hole, including the universal AMPS hole pattern, which will attach
to most keyboards.

MDT MOUNT WITH UPPER
TELE-POLE™ & DOUBLE
SOCKET ARM MOUNT

RAM-DIS-MDT2-8-101

TOUGH-BOX™ Patents and Trademarks

75www.rammount.com/IP

TABLET SOLUTIONS FOR TOUGH-BOX™ Additional Tablet
Solutions Starting
TOUGH-BOX™ HOLDER SYSTEM on Page 9
FOR APPLE IPAD
TOUGH-BOX™ HOLDER
Part Number Part Description Material SYSTEM FOR IPAD AIR
RAM-HOL-AP17U RAM® high strength High strength composite
RAM-101U-D composite holder for Powder coated marine grade
the Apple iPad Air. aluminum
RAM-VB-110-5U 1.5" diameter
ball mount with 2 Powder coated steel
quantity 2.5" round
bases that contain
the AMPs hole
pattern.
6" single swing arm
with 2.5" round base
that contains the
AMPs hole pattern.

RAM-VP-TTMF8U 8" upper male Powder coated marine grade
Tele-Pole™ with tear aluminum
drop ange.

Tablet Solution for RAM® Tough-Box™ consoles.

To create the con guration displayed, you must purchase all of the
separate parts listed above. Holder shown is designed for iPad Air.
Additional tablet holders and solutions available starting on page 9. Please
visit www.rammount.com for all available holder models.

TOUGH-BOX™ LAPTOP SOLUTIONS

CF-31 DOCKING STATION & TOUGH-TRAY™
LAPTOP HOLDER
Part Number Compatible Computers Material

RAM-234-3 Tray depth: 10.0" High strength
Tray width: 10-16" composite
Side clamp arm height:
.5" (min) to 1.75" (max)

RAM-234-PAN1P Panasonic Toughbook® High strength UNIVERSAL LAPTOP
(Single RF Pass CF-28, CF-29, CF-30 composite enclosure TOUGH-TRAY™ HOLDER
Through) and CF-31 rugged & powder coated
RAM-234-PAN1P-2RF laptops marine grade RAM-234-3
(Dual RF Pass Through) aluminum
TOUGH-DOCK™ W/ PORT
Part Number Placement Material REPLICATION/DUAL RF
PASS THROUGH
RAM-VP-TTM4U Attaches to Tough- Powder coated steel
Box™ RAM-234-PAN1P-2RF

RAM-VB-110-4U Attaches to upper Powder coated
Tele-Pole™ marine grade
aluminum

RAM-240U Attaches to Swing Arm Powder coated
marine grade
aluminum

RAM® Tough-Dock™ Powered Docking Station with port replication for
Panasonic Toughbook® CF-28, CF-29, CF-30 and CF-31 rugged laptops.

Warranty Information:
3 year warranty on electrical and electronic parts
Lifetime warranty on mechanical parts

DON'T SEE WHAT YOU'RE LOOKING FOR?

GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

76 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

TOUGH-BOX™ ACCESSORIES

STEP 5: ACCESSORIES
CUSTOMIZE YOUR TOUGH-BOX™ WITH A NUMBER OF RAM® MOUNT ACCESSORIES

The RAM® Tough-Box™ Vehicle Console is the first molded console in the industry. The
materials consist of high strength composite and steel, providing industry leading durability with
a light-weight design, as well as long lasting performance backed by RAM's lifetime warranty.
Rounded corners and edged are integrated throughout the Tough-Box™ to ensure driver and
passenger safety and comfort.
Knockout hole patterns and cigarette adapters allow the RAM® Tough-Box™ to serve your
speci c needs for adding any accessories along the sides of the console. Unique molded
faceplates are cut to t speci c dimensions of radios, with a tongue and groove feature that
interlocks adjacent faceplates together. Easy to con gure and switch out as needed using the
RAM® twist lock™ functionality.

Instructions:
http://www.rammount.com/SupportCenter
DON’T SEE YOUR VEHICLE OR MODEL YEAR LISTED HERE?
GO TO WWW.RAMMOUNT.COM FOR THE LATEST INFORMATION
AS THIS PRODUCT LINE IS CONSTANTLY EVOLVING!

TOUGH-BOX™ Patents and Trademarks

STEP 5: TOUGH-BOX™ ACCESSORIES 77www.rammount.com/IP

INSTRUCTIONS

TOUGH-BOX™CONSOLE FLASHLIGHT HOLDER
Part Number Placement Material

RAM-VC-119C Attaches to either High strength composite
side of RAM® Console and powder coated marine
Tough-Boxes™ grade aluminum

Organization in a mobile environment is not only more ef cient, but safer too.
RAM® offers versatile solutions to keep your Maglite® ashlight within easy
reach and off the seat. A fully adjustable version that attaches to the side of
the RAM® Tough-Box™ console is an ideal way to keep your ashlight at the
ready but safely stored while on the go. A solution that is easy to install, simple
to adjust, and has no sharp edges. Compatible with 4-Cell D, 5-Cell D & 6 Cell
D Maglite® ashlights.

TOUGH-BOX™ TOP PLATE FLASHLIGHT HOLDER TOUGH-BOX™CONSOLE
Part Number Placement Material FLASHLIGHT HOLDER

RAM-VC-119TP Attaches to RAM® High strength composite RAM-VC-119C
Console top plates and powder coated
marine grade aluminum TOUGH-BOX™ TOP
PLATE FLASHLIGHT
Organization in a mobile environment is not only more ef cient, but safer too. HOLDER
RAM® offers versatile solutions to keep your Maglite® ashlight within easy
reach and off the seat. A fully adjustable version that attaches to RAM® Top RAM-VC-119TP
Plate’s is an ideal way to keep your ashlight at the ready but safely stored
while on the go. A solution that is easy to install, simple to adjust, and has
no sharp edges. Compatible With:4-Cell D, 5-Cell D & 6 Cell D Maglite®

ashlights.

TOUGH-BOX™ ARM REST
Part Number Placement Material

RAM-VC-ARM1 Attaches to RAM® Powder coated marine
Console top plates grade aluminum

Comfort is paramount if you are going to be spending a lot of time in a mobile
of ce. RAM® offers tough and adjustable arm rests that attach easily to an
installed top plate adding comfort and support. Beyond just a place to rest,
this line of products can also house a compact printer or note pad, allowing
you to get the most out of usable space. *Additional Arm Rest options can be
found at www.rammount.com (search term “arm rest”).

DON'T SEE WHAT YOU'RE LOOKING FOR? TOUGH-BOX™
GO TO WWW.RAMMOUNT.COM FOR THE ARM REST
LATEST INFORMATION AS THIS PRODUCT LINE
RAM-VC-ARM1
IS CONSTANTLY EVOLVING!

78 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 5: TOUGH-BOX™ ACCESSORIES

TOUGH-BOX™ ARM REST & PRINTER HOLDER
Part Number Placement Material

RAM-VC-ARM1- Attaches to RAM® High strength composite &
PEN1 console top powder coated marine grade
plates aluminum

TOUGH-BOX™ ARM REST RAM® knows space is always at a premium, so we always design
& PRINTER HOLDER products which make the most of usable space. Proving this, our armrest
with integrated printer mount is offered as an accessory add-on to our
RAM-VC-ARM1-PEN1 RAM® Tough-Box™ line of Console products. Simple to install and use,
your mobile workspace will be more comfortable, practical and ef cient
TOUGH-BOX™ as well. Supporting Brother® PocketJet® Series Printers, your mobile
MICROPHONE CLIPS workstation can now be a document center ready to print invoices,
receipts, tickets, maps, and more. The RAM® Tough-Box™ Console line of
RAM-VC-MC1 products and accessories will re ne and simplify most any mobile of ce.
RAM-VC-MC2
RAM-VC-MC3 The RAM-VC-ARM1-PEN1 is designed to hold the following printers:

Brother® PocketJet® 6 & 6 Plus
Brother® PocketJet® 3 & 3 Plus

TOUGH-BOX™ MICROPHONE CLIPS
Part Number Placement Material

RAM-VC-MC1 (1 Attaches to all High strength composite &
Clip) standard and angled powder coated marine grade
RAM-VC-MC2 console boxes aluminum
(2 Clips)
RAM-VC-MC3
(3 Clips)

Here at RAM® we are all about options. Even when approaching a simple
design we make sure to present several options to our customers so we
are sure to meet and exceed their expectations. Take a look at the line of
microphone clips for the RAM® Tough-Box™ Console System. The RAM®
microphone clip features a no-fail safety latch which holds the microphone
securely while not in use. This latch can also be easily removed to achieve
a quick release feature. RAM® products are made in the USA and are
backed by the renowned NPI Lifetime Warranty.

12 VOLT LIGHTER RECEPTACLE FACEPLATES
Part Number Placement Material

RAM-FP2-CIG2 (2 Attaches to all Diecast aluminum
Qty.) standard and angled
RAM-FP2-CIG3 (3 console boxes
Qty.)
RAM-FP2-CIG4 (4
Qty.)

RAM® 12 Volt Lighter Receptacle Faceplate is a must have accessory
for any Tough-Box™ Console System. The faceplate is compact and
lightweight, taking up minimal space in your console, yet offering the
utmost in versatility. The rubber caps, along with the innovative tongue
and groove feature keeps the inside of the console free of contaminates
as well as provides a rock solid system once installed into the RAM®
Tough-Box™ Console. Also, the faceplate makes use of the patented
RAM® Twist-Lock™ feature which can be loosened to quickly and easily
service electronics or swap out old devices. This product will ensure you
are never without the power you need to
get the job done.

TOUGH-BOX™ DON'T SEE WHAT YOU'RE LOOKING FOR?
12V LIGHTER GO TO WWW.RAMMOUNT.COM FOR THE
FACEPLATES LATEST INFORMATION AS THIS PRODUCT LINE IS

RAM-FP2-CIG2 CONSTANTLY EVOLVING!
RAM-FP2-CIG3
RAM-FP2-CIG4

TOUGH-BOX™ Patents and Trademarks

79www.rammount.com/IP

STEP 5: TOUGH-BOX™ ACCESSORIES

TOUGH-BOX™ 12V CIGARETTE RECEPTACLE
Part Number Placement Material

RAM-VC-CIG1FU Attaches to all RAM® Powder coated marine
Tough-Box™ faceplates grade aluminum
with cigarette cut out

A convenient female cigarette power receptacle to accommodate power TOUGH-BOX™ 12 VOLT
adapters for a variety of devices. CIGARETTE RECEPTACLE

TOUGH-BOX™ DRINK CUP HOLDERS RAM-VC-CIG1FU
Part Number Placement Material
CONSOLE BOX END
RAM-FP-CUP2 Attaches to all standard High strength composite DUAL DRINK HOLDER
RAM-FP-CUP1F and framed console
boxes RAM-FP-CUP2

For police, re, and rescue vehicles, after-market consoles are usually all
business. However, a drink cup holder can be just as important as any other
accessory and at RAM®, their multi-functional design means they help get
the job done as well. The integrated card slot is ideal for a drivers license or
business card and there is also pen storage. So, besides having a spot for
two beverages, you also have a place for commonly used items. An internal
and external version is available depending on your needs. You can place the
cup holder inside the console box or use the external model and attach to the
front or rear plate. Either way, you get an amazingly simple yet well thought out
design ready to get you through the work day.

TOUGH-HUB™ Placement Material CONSOLE 4" DUAL
Secure using mounting High strength composite DRINK HOLDER
Part Number points on the exterior
RAM-234-HUB1 four corners, or the 75 RAM-FP-CUP1F
x 75mm VESA hole
pattern for mount TOUGH-HUB™
integration
RAM-234-HUB1
The Tough-Hub™ is an easy-to-use Features:
USB Hub offering quick access to • 6 qty 5v powered USB 2.0 Ports
USB ports and Internet connection for • 1 qty 10/100 MBPS ethernet port
your various devices. Integrated cable • Threaded power input for 12-48
strain relief assures your connection
is solid even in rough environments. VDC input
Ignition trigger can be set to supply • Strain relief connection points
power to connected devices for a • Ignition trigger
set amount of time after the vehicle Dimensions:
ignition is turned off. Height: 1.375’’. Width: 5.125’’.
Depth: 3.56’’. Weight: 0.30lb
Works with all console boxes, RAM-
2461U and RAM-334-1U

80 VEHICLE MOUNTING CATALOG TOUGH-BOX™
RAMMOUNT.COM

STEP 5: TOUGH-BOX™ ACCESSORIES

SAFE-T-CHARGE™ VEHICLE
CHARGE PROTECTION
Part Number Placement Material

RAM-234-VCP1 Any at surface Flame retardant ABS
construction

CSAHFAER-GT-ECPHRAORGTEEC™TIVOENHICLE The RAM® Safe-T-Charge™ is feature Features:
rich and affordable making it the best • Weatherproof for use in
RAM-234-VCP1 choice for protecting your vehicle or
boat’s electrical system and battery. With marine environments
2’’ FACEPLATES FOR multiple con gurations through onboard • 30AMP rating
SWITCHES dip switches, the Safe-T-Charge™ can • 24V jump start protection
be con gured to shut down connected Description:
ROCKER SWITCHES devices either by a trigger from the ignition Height: 1.26’’
or by sensing a drop in the DC voltage Width: 3.74’’
below a level capable of starting your Depth: 3.15’’
engine. Easily select a predetermined Weight: 0.30lbs
duration of time to have your connected
devices shut down to assure you will
always be able to start your vehicle.

SWITCH FACEPLATES & ROCKER SWITCHES

Faceplate Part Number Switch Placement Material

RAM-FP2-S1L-0830-1450 1

RAM-FP2-S2L-0830-1450 2 Attaches to Powder coated
RAM-FP2-S3L-0830-1450 3 all RAM® aluminum
RAM-FP2-S4L-0830-1450 4 Tough-Box™
consoles

RAM-FP2-S5L-0830-1450 5

Switch Part Number Switch Type

RAM-SWITCH-DPSTL Double Pole Single throw

RAM-SWITCH-DPDTL- Double Pole, Double throw with momentary
MOM on/off position

12 VOLT LED CIGARETTE PLUG READING LIGHT
Part Number Placement Flex Arm Length

RAM-CIG- Attaches to any 12 8’’
LIGHT-8 volt cigarette receiver

With a goose neck for adjustment and a soft light that is perfect to read or
write, the RAM® 12 Volt Red and White Light Adapter is a great addition
to any mobile of ce. Compact and light weight, storing this helpful
product when not in use is quick and easy. Plug it into your RAM® 12 Volt
Receptacle or any 12 Volt receiver in your vehicle to comfortably and
discretely view your work under low lighting conditions.

12 VOLT
READING LIGHT

DON'T SEE WHAT YOU'RE LOOKING FOR?
GO TO WWW.RAMMOUNT.COM FOR THE
LATEST INFORMATION AS THIS PRODUCT LINE IS

CONSTANTLY EVOLVING!

TOUGH-BOX™ Patents and Trademarks

STEP 6: TOP PLATES 81www.rammount.com/IP

Up to 30% lighter than other manufacturer’s top plates, the RAM®
design is just as functional and durable but without all that fuel
robbing weight.
RAM® top plates are built tough and ready for the demands of the
mobile professional. Installers will love the simple yet rugged design
and the ease of installation.

Instructions:

http://www.rammount.com/SupportCenter

23’’ & 29’’ TOUGH-BOX™ TOP PLATE
Part Number Placement Width Length Material
Powder
RAM-VC-TP-23 Attaches 8’’ 23’’ coated
RAM-VC-TP-29 to RAM® 29’’ high
console leg strength
kits steel

23” TOUGH-BOX™
TOP PLATE

RAM-VC-TP-23

29” TOUGH-BOX™
TOP PLATE

RAM-VC-TP-29

82 VEHICLE MOUNTING CATALOG SECURITY SOLUTIONS
RAMMOUNT.COM

RAM® SECURITY
SOLUTIONS

PIN-LOCK™ SECURITY KNOBS AND KEYS PSINEK-CLNUOORCBIKTY™
You make a significant investment in the equipment you
purchase to make your job or hobby easier and more PIN-LOCK™
enjoyable. Whether it’s a high end piece of marine electronics, a KEY KNOB
GPS for your motorcycle, or a tablet used for business purposes,
you need to protect your investment. RAM® Mounts protect your PIN-LOCK™ SECURITY
device from harmful shock and vibration, but what about theft and KNOBS EASILY
tampering? RAM® offers a full suite of security products which
protect your device while mounted on your RAM® Mount from RETRO-FIT ANY EXISTING
theft and unwanted tampering. RAM® DOUBLE SOCKET
Simply add a security knob or nut to your RAM® Mount to
deter would-be thieves from targeting your equipment. RAM® ARM OR SWING ARM
security solutions are also a great way to add tamper resistance to
your RAM® Mount in situations where there is a desire to prevent
end-users from adjusting the mount or removing the device. High
strength composite and brass construction assures a long life of
trouble free use in a wide variety of environments including marine
and salt water.

KEYED LOCKING PIN-LOCK™ KEYED LOCKING PIN-LOCK™
KNOB SECURITY KNOB KNOB SECURITY KNOB

SLIMMER PROFILE ONCE FITTED AND
ANTI-TAMPER SECURED WITH

IMPROVED THEFT DETERRENCE PIN-LOCK™ KNOB,
ARM WILL STAY

LOCKED IN PLACE

SECURITY SOLUTIONS Patents and Trademarks

83www.rammount.com/IP

Secure your RAM® Mounts in
Land, Air, and Sea

PIN-LOCK™ SECURITY PIN-LOCK™ SECURITY NUT
KNOB AND KEY KNOB FOR AND KEY KNOB FOR 2.25"/3.38"
1" DIAMETER B SIZE ARMS
DIAMETER D/E SIZE ARMS
RAP-S-KNOB3U RAP-S-NUT5U

PIN-LOCK™ SECURITY KNOBS/KEY KNOBS
Part Number Compatible Arm Size Material

RAP-S-KNOB3U B Size Arm (1" Ball) High strength composite
RAP-S-KNOB5U C Size Arm (1.5" Ball) and brass threaded insert/
RAP-S-NUT5U D/E Size Arm
(2.25/3.38" Balls) nut

RAM® security knobs are lower pro le and only add a small amount of
additional bulk to your system when compared to the standard knob.
At a fraction of the cost of currently available keyed locking knobs,
the additional peace of mind and tamper resistance comes at a very
affordable price.

COMPLETE PIN-LOCK™ SECURITY KNOB KITS
FOR LAPTOP MOUNTS AND SWING ARMS
Swing Arm Kit P/N Kit Type Material

RAP-S-KNOB-VB- Any RAM® Mounts High strength
109U single swing arm composite and
RAP-S-KNOB-109-1U system.
Any RAM® Mounts brass insert
double swing arm
system.

Laptop Kit P/N Kit Type Material

RAM-234-SKNMU Secure-N-Motion High strength
(1 Security Knob + Security Knob Kit composite and
Hardware) RAM® Security Kit for
RAM-234-SKU Laptop Tray brass insert
(4 Security Knobs +
Hardware) SECURITY KEY KNOB KIT
FOR DOUBLE SWING ARM
Out t your vehicle's mounting system with our complete array Pin-
Lock™ Security Knob Kits for vehicle applications. To secure your RAP-S-KNOB-VB-109-1U
swing arms, choose from the RAP-S-KNOB-109-1U, or RAP-S-KNOB-
VB-109U, and for laptops, choose either the RAM-234-SKNMU for
securing your laptop or the RAM-234-SKU for securing your whole
RAM® vehicle system.

KEYED LOCKS
Part Number Compatible Arm Size Material

RAM-KNOB3LU 1/4"-20 Brass Hole High strength composite
RAM-KNOB5LU for 1" B size arms with brass insert
5/16"-18 Brass Hole
for 1.5" C size arms

Description: LOCKING KNOB WITH
For those that prefer a standard key option, RAM® offers two locking 1/4"-20 BRASS HOLE
knobs, a brass 1/4"-20 and a 5/16"-18 Brass Hole thread. The locks on FOR 1" B SIZE ARMS
these knobs allow you to disengage the screwing of the knob, creating
a secure mount. Once you have set your mount in the location you RAM-KNOB3LU
need, you can lock it in place and feel safe that your mounted device
will stay right where you left it.

84 VEHICLE MOUNTING CATALOG PUBLIC SAFETY
RAMMOUNT.COM

PUBLIC SAFETY TABLET MOUNTING SOLUTIONS

THE SAME RAM® SIMPLICITY AND DURABILITY
At RAM®, we recognize the value of flexibility when it comes to choosing a mounting solution. We
understand that many police departments select tablets as a viable, convenient and cost effective option
in place of expensive laptops. RAM® offers a number of tablet mounting solutions that accommodate
tablets with and without sleeves and heavy duty protective cases.
RAM® tablet mounting solutions are available in both locking and docking versions as well. RAM®
offers solutions for all major tablet models including all versions of the iPad, Samsung and more. With
multiple mounting con gurations available for virtually every tablet on the market, you can be certain
RAM® has the right solution for you!

RAM® Tablet Mounts featuring Roto-View™ Adapter

• Easily rotate between landscape and portrait for optimum viewing
• Compatible with multiple tablet models
• Optional keyboard attachment available
• Easy installation

PUBLIC SAFETY Patents and Trademarks

RAM® PUBLIC SAFETY 85www.rammount.com/IP

Tablets are becoming an industry
standard saving money, weight,
and most importantly, time. RAM®

has embraced this trend with
unique solutions for a wide variety
of tablets, designed specificallyfor

public safety use.

Apple iPad Air featuring
RAM® Roto-view™ with

Keyboard Adapter

RAP-TAB-KEY1-300U

RAM® Mount Unique Features

• Low Cost Design
• Shock and Vibration Protection
• Simple Installation and Easy to Use
• No Sharp Edges
• True OEM Look and Feel
• Military Endorsed

86 VEHICLE MOUNTING CATALOG PUBLIC SAFETY
RAMMOUNT.COM

CHEVROLET IMPALA PPV
RAM® POLICE VEHICLE SOLUTIONS

Part Number Placement Date-Range Material

RAM-VB-182- Passenger side on 2006-2015 High strength composite,
SW1 the oor, in front of powder coated steel,
seat and marine grade
aluminum

This con guration provides a telescoping feature that ranges from 12 to 18
inches. Dual swing arms provide articulation and 12 inches of reach for passenger
and driver access to the mounted device. Patented rubber ball and socket joint
provides additional adjustment as well as shock and vibration isolation. The RAM®
Tough Tray™ is spring loaded to accommodate 10” to 16” wide laptops & (17”
wide screens). The tray features four adjustable retaining arms with rubber grip
feature. These arms can be moved both vertically and horizontally. This allows for a
custom t for varying thicknesses of laptops and the freedom of not blocking ports
or drives. A screen support and USB light are also available to accessorize the
tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM®
systems to support GPS or other electronics.

Part Number Placement Date-Range Material

RAM-VCA-115 Center console 2011-2015 High strength composite,
between driver and powder coated steel,
passenger seats and marine grade
aluminum

This special design does not require any special tools. A vast number of
applications can be tted with a single console solution. Never before have
installers been afforded this level of freedom or a solution as simple and innovative.
Ef ciency being the driving force behind this product, money will be saved in
installation time, servicing of electronics mounted in the console, and on fuel given
the strong yet lightweight design.

PUBLIC SAFETY Patents and Trademarks

87www.rammount.com/IP

CHEVROLET TAHOE PPV
RAM® POLICE VEHICLE SOLUTIONS

CONSOLES Placement
Part Number Date-Range Material

RAM-VCA-117C Mounts over 2015 High strength
RAM-VCA-117 transmission hump 2015 composite, powder
RAM-VCA-116C 2010-2012 coated steel, and
RAM-VCA-116 2010-2012 marine grade aluminum

The RAM Tough-Box™ angled multi-length console provides multiple length
choices using just one console model. This special design does not require any
special tools. A vast number of applications can be tted with a single console
solution. Never before have installers been afforded this level of freedom or a
solution as simple and innovative. Ef ciency being the driving force behind this
product, money will be saved in installation time, servicing of electronics mounted
in the console, and on fuel given the strong yet lightweight design.

NO-DRILL™ LAPTOP MOUNTS
Part Number Placement Date-Range Material

RAM-VB-193- Mounts to 2015 High strength
SW1 passenger side composite, powder
RAM-VB-193 2015 coated steel, and
RAM-VB-159- oor board, in 2007-2014 marine grade aluminum
SW1 front of seat. No-
RAM-VB-159 Drilling™ required. 2007-2014

This No-Drill™ Laptop Stand System installs quickly and easily into the speci ed
vehicles using the existing hardware of the passenger side seat rails. This
con guration provides a telescoping feature that ranges from 12 to 18 inches. Dual
swing arms provide articulation and 12 inches of reach for passenger and driver
access to the mounted device. Patented rubber ball and socket joint provides
additional adjustment as well as shock and vibration isolation. The RAM Tough
Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide
screens).

88 VEHICLE MOUNTING CATALOG PUBLIC SAFETY
RAMMOUNT.COM

CHEVROLET CAPRICE PPV
RAM® POLICE VEHICLE SOLUTIONS

Part Number Placement Date-Range Material

RAM-VB-189-SW1 Passenger side on 2011-2013 High strength
the oor, in front of composite, powder
seat coated steel, and
marine grade
aluminum

This con guration provides a telescoping feature that ranges from 12 to 18
inches. Dual swing arms provide articulation and 12 inches of reach for passenger
and driver access to the mounted device. Patented rubber ball and socket joint
provides additional adjustment as well as shock and vibration isolation. The RAM®
Tough Tray™ is spring loaded to accommodate 10” to 16” wide laptops & (17”
wide screens). The tray features four adjustable retaining arms with rubber grip
feature. These arms can be moved both vertically and horizontally. This allows for a
custom t for varying thicknesses of laptops and the freedom of not blocking ports
or drives. A screen support and USB light are also available to accessorize the
tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM®
systems to support GPS or other electronics.

Tough-Box™ console featuring
IntelliSkin™ with GDS Technology™.
For more information on GDS™ go
to page 10.

PUBLIC SAFETY Patents and Trademarks

89www.rammount.com/IP

DODGE CHARGER POLICE
RAM® POLICE VEHICLE SOLUTIONS

Part Number Placement Date-Range Material

RAM-VB-129- Passenger side 2011-2015 High strength
SW1 on the oor, in composite, powder
front of seat coated steel, and
marine grade
aluminum

This con guration provides a telescoping feature that ranges from 12 to
18 inches. Dual swing arms provide articulation and 12 inches of reach for
passenger and driver access to the mounted device. Patented rubber ball and
socket joint provides additional adjustment as well as shock and vibration
isolation. The RAM® Tough Tray™ is spring loaded to accommodate 10” to 16”
wide laptops & (17” wide screens). The tray features four adjustable retaining
arms with rubber grip feature. These arms can be moved both vertically and
horizontally. This allows for a custom t for varying thicknesses of laptops and
the freedom of not blocking ports or drives. A screen support and USB light
are also available to accessorize the tray. Hole patterns on perimeter of tray
facilitate the mounting of additional RAM® systems to support GPS or other
electronics.

Part Number Placement Date-Range Material

RAM-VCA-112C Center console 2011-2015 High strength
between driver composite, powder
and passenger coated steel, and
seats marine grade
aluminum

This special design does not require any special tools. A vast number of
applications can be tted with a single console solution. Never before have
installers been afforded this level of freedom or a solution as simple and
innovative. Ef ciency being the driving force behind this product, money will
be saved in installation time, servicing of electronics mounted in the console,
and on fuel given the strong yet lightweight design.

90 VEHICLE MOUNTING CATALOG PUBLIC SAFETY
RAMMOUNT.COM

FORD POLICE INTERCEPTOR UTILITY
RAM® POLICE VEHICLE SOLUTIONS

Part Number Placement Date-Range Material

RAM-VB-187- Passenger side on 2014-2015 High strength
SW1 the oor, in front of composite, powder
seat coated steel, and
marine grade aluminum

This con guration provides a telescoping feature that ranges from 12 to 18
inches. Dual swing arms provide articulation and 12 inches of reach for passenger
and driver access to the mounted device. Patented rubber ball and socket joint
provides additional adjustment as well as shock and vibration isolation. The RAM®
Tough Tray™ is spring loaded to accommodate 10” to 16” wide laptops & (17”
wide screens). The tray features four adjustable retaining arms with rubber grip
feature. These arms can be moved both vertically and horizontally. This allows for a
custom t for varying thicknesses of laptops and the freedom of not blocking ports
or drives. A screen support and USB light are also available to accessorize the
tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM®
systems to support GPS or other electronics.

Part Number Placement Date-Range Material

RAM-VCA- Center console 2014-2015 High strength
114C between driver and composite, powder
passenger seats coated steel, and
marine grade
aluminum

Constructed of high strength composite, steel, and aluminum, materials have been
meticulously chosen to ensure long product life and performance. Another key
feature is the incorporation of molded parts to create the tightest of seams and the
elimination of sharp corners or edges. Keeping in mind the safety of the vehicle
occupants and ease of use and installation, these consoles are crafted to meet and
exceed expectations. The RAM® Tough-Box™ consoles are sure to set a industry
standard, no eet should up t their vehicles with anything less than the best,
RAM®.

PUBLIC SAFETY Patents and Trademarks

91www.rammount.com/IP

FORD POLICE INTERCEPTOR SEDAN
RAM® POLICE VEHICLE SOLUTIONS

Part Number Placement Date-Range Material

RAM-VB-190- Passenger side on the 2014-2015 High strength
SW1 oor, in front of seat composite, powder
coated steel, and
marine grade aluminum

This con guration provides a telescoping feature that ranges from 12 to 18
inches. Dual swing arms provide articulation and 12 inches of reach for passenger
and driver access to the mounted device. Patented rubber ball and socket joint
provides additional adjustment as well as shock and vibration isolation. The RAM®
Tough Tray™ is spring loaded to accommodate 10” to 16” wide laptops & (17”
wide screens). The tray features four adjustable retaining arms with rubber grip
feature. These arms can be moved both vertically and horizontally. This allows for a
custom t for varying thicknesses of laptops and the freedom of not blocking ports
or drives. A screen support and USB light are also available to accessorize the
tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM®
systems to support GPS or other electronics.

Part Number Placement Date-Range Material

RAM-VCA- Center console 2014-2015 High strength
113C between driver and composite, powder
passenger seats coated steel, and
marine grade aluminum

This special design does not require any special tools. A vast number of
applications can be tted with a single console solution. Never before have
installers been afforded this level of freedom or a solution as simple and innovative.
Ef ciency being the driving force behind this product, money will be saved in
installation time, servicing of electronics mounted in the console, and on fuel given
the strong yet lightweight design.

WHAT ARE YOU
PASSIONATE ABOUT?

RAM® MOUNTS HAS A LARGE ONLINE COMMUNITY & WE WOULD LOVE YOU TO
BE A PART OF IT!

YOUTUBE.COM/ #RAMMOUNTS
RAMMOUNT

RAMMOUNT.COM

UNIVERSAL MOUNTING SOLUTIONS

RAM® MOUNTS ARE NOT JUST FOR THE ROAD. RAM® IS THE EXTRA PAIR OF HANDS
YOU NEED TO HOLD YOUR SMARTPHONE, TABLET, LAPTOP, GPS, FISHING ROD,
CAMERA, TACKLE BOX, and DRINK. YOU GET THE EXTRA VISION AND SUPPORT
WHERE YOU NEED IT.

THE RAM® X-GRIP®, TOUGH-CLAW™ AND TOUGH-CLAMP™ ARE THE FRONT LINE
OF RAM® MOUNTING SOLUTIONS, ADDING A WHOLE RANGE OF NEW PLACES
YOU CAN TAKE YOUR MOUNTS. LET RAM® HELP YOU ADD THE BEST MOUNTING
SOLUTION IN A CONVENIENT, UNIVERSAL APPLICATION.

X- GRIP®

•Quickly hold and retrieve your
smartphones, tablets, and phablets

•A tough grip which won’t release or slip
•Holds a wide variety of devices with just

one mounting solution

TOUGH
CLAMP™

•Lightning fast mounting solutions
•Secure t around at edges or poles
•Quick release design which can hold

two bases for more mounting options

TOUGH
CLAW™

•Rugged and securely grip to poles of varying width
•Durable twist lock with low-pro le-design
•Won’t slide or loosen even in the harshest conditions

RAMMOUNT.COM IS CONSTANTLY EVOLVING TO DISPLAY THE LATEST
RAM® GEAR IN A VARIETY OF DIFFERENT INDUSTRIES AND RECREATIONAL

ACTIVITIES. PLEASE VISIT WWW.RAMMOUNT.COM FOR THE LATEST
INNOVATIVE PRODUCTS FROM RAM MOUNTING SYSTEMS.

94 VEHICLE MOUNTING CATALOG UNIVERSAL X-GRIP®
RAMMOUNT.COM

AWARD WINNING X-GRIP®

The RAM® X-Grip® has won numerous accolades and
awards since its release including The Wirecutter Best

Smartphone Car Mount 2013.

BEST MOST
SMARTPHONE INNOVATIVE
CAR MOUNT CHEVROLET
IS THE RAM® ACCESSORY
X-GRIP SEMA 2011

BEST BEST CAR
SMARTPHONE ACCESSORY
CAR MOUNT 2013
2013

VISIT RAMMOUNT.COM TO SEE THE LATEST X-GRIP® SYSTEMS! The distinctive RAM®
X-Grip® Shape is a
registered design and
trademark of National
Products Inc.

UNIVERSAL X-GRIP® Patents and Trademarks

X-GRIP® 95www.rammount.com/IP

Grip any phone, phablet, or tablet
instantly with a durable product you
can take anywhere and attach to any
vehicle. These durable, sleek looking
mounts are universal in application,
manufactured in AMERICA, and are
backed by a LIFETIME WARRANTY.

BEST CAR
ACCESSORY

2013

96 VEHICLE MOUNTING CATALOG UNIVERSAL X-GRIP®
RAMMOUNT.COM

X-GRIP® MOUNTS

X-GRIP® UNIVERSAL SMARTPHONE HOLDER
Part Number Placement Material

RAM-HOL-UN7BU Passenger side front High strength composite
RAM-B-316-1U seat bolt. If no seat & powder coated marine
bolt, a hole must be grade aluminum
drilled.

RAM POD I Universal No-Drill™ vehicle mount with 18’’ rigid aluminum
rod and single socket arm with universal X-Grip® smartphone holder.

BEST SMARTPHONE CAR
MOUNT IS THE RAM® X-GRIP

Part Number Placement Material

RAP-B-166-2-UN7U Vehicle front Stainless steel & high
windshield or any strength composite
non-porous surface

Includes a 2.75” twist lock suction cup base, double socket system and
universal spring loaded X-Grip® holder for cell phones. The suction cup,
twist lock base is designed to have a strong hold on glass and non-porous
plastic surfaces, including RAM® adhesive disks.

Compatibility:
All Models which t within the stated compatible dimensions.

Compatible Dimensions:
Minimum Width = 1.875"
Devices at 1.875” must be a minimum of 4” in height to t this holder
Maximum Width 3.25”, depth .875”

MOST INNOVATIVE
CHEVROLET ACCESSORY
SEMA 2011

Part Number Placement Material

RAP-SB-180-UN7U Dashboard Stainless steel and high
strength composite

RAM® Lil Buddy™ adhesive stick base mount with universal X-Grip®
smartphone holder.

BEST SMARTPHONE
CAR MOUNT 2013

Part Number Placement Material

RAM-B-149Z-UN7U Handlebar Powder coated marine
grade aluminum,
stainless steel
components & high
strength composite

RAM® handlebar rail mount with zinc coated U-Bolt base and universal
X-Grip® smartphone holder.

UNIVERSAL X-GRIP® Patents and Trademarks

97www.rammount.com/IP

X-GRIP® MOUNTS

X-GRIP® 6’’ PHABLET HOLDER
Part Number Placement Material

RAM-HOL-UN10BU Passenger side front High strength composite,
RAM-B-316-1U seat bolt. If no seat stainless steel
bolt, a hole must be components, & powder
drilled. coated marine grade
aluminum

The Universal No-Drill™ oor mount includes the universal spring
loaded
X-Grip® IV holder and RAM POD I vehicle mount. The base of the mount
clamps to your seat rail without any drilling necessary. The 18’’ rigid

exible rod can be bent to position your device to its optimum viewing
location, and remain securely positioned while the vehicle is in motion.

Compatible Dimensions:
Minimum Width = 1.75", Maximum Width = 4.5"

Part Number Placement Material

RAM-HOL-UN10BU Flat surface High strength composite,
RAM-B-201U (Dashboard or stainless steel
RAM-B-202U Console) components, & powder
coated marine grade
aluminum

The at surface console mount includes the universal spring loaded
X-Grip® IV holder, standard length double socket arm and 2.5’’ diameter
round base which offers the universal AMPS hole pattern.

Compatible Dimensions:
Minimum Width = 1.75", Maximum Width = 4.5"

Part Number Placement Material

RAM-B-166-UN10U Vehicle front High strength composite,
RAM-B-201U windshield or any stainless steel
RAM-B-224-1U non-porous components, & powder
surface coated marine grade
aluminum

The RAM-B-166-UN10U consists of a 3.25" twist lock suction cup
base, double socket arm and universal spring loaded X-Grip® IV holder
for 6" large phones and phablets. The suction cup Twist-Lock™ base
is designed to have a strong hold on glass and non-porous plastic
surfaces, including RAM® adhesive disks.

Compatibility:
HTC Droid DNA, Huawei Ascend P1, LG Intuition, Nokia Lumia 920,
Pantech Vega No. 6, Samsung GALAXY Note II/III. All phones which t
in the compatible dimensions below.

Dimensions:
Minimum Width = 1.75", Maximum Width = 4.5"

Part Number Placement Material

RAP-299-3-UN10U Cup holder High strength
RAM-B-103-238U composite, & stainless
RAP-299-3U steel components

The RAP-299-3-UN10U includes the RAM-A-CAN™ cup holder base,
double socket arm and universal spring loaded X-Grip® IV holder for 6"
large phones and phablets. Included are support ns that ex and can
be trimmed, making the cup holder base conform to most vehicle cup
holders.

Compatible Dimensions:
Minimum Width = 1.75’’, Maximum Width = 4.5’’

98 VEHICLE MOUNTING CATALOG UNIVERSAL X-GRIP®
RAMMOUNT.COM

X-GRIP® MOUNTS

X-GRIP® 7’’-8’’ TABLET HOLDER
Part Number Placement Material

RAM-B-316-1-UN8B Passenger side High strength composite,
front seat bolt. If stainless steel
no seat bolt, a hole components, & powder
must be drilled. coated marine grade
aluminum

RAM POD I universal No-Drill™ vehicle base, 18” rigid aluminum rod,
socket system and universal spring loaded X-Grip® II holder for 7” tablets.
The base of the mount connects to your seat rail without any drilling
necessary. The 18” rigid aluminum rod can be bent to position your device
to its optimum viewing location.

Compatible Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to t)
Maximum Width = 5.75"
Depth = 0.875"

Part Number Placement Material

RAM-B-166-UN8U Vehicle front High strength composite,
windshield or any stainless steel components, &
non-porous surface powder coated marine grade
aluminum

Includes a 3.25” twist lock suction cup base, double socket arm and
universal spring loaded X-Grip® II holder for 7” tablets. The suction cup,
twist lock base is designed to have a strong hold on glass and non-porous
plastic surfaces, including RAM® adhesive disks.

Compatible Dimensions:
Minimum Width = 2.25”, (Devices 2.25” in width must be a minimum of 7”
in height to t), Maximum Width = 5.75” Depth = 0.875”

Part Number Placement Material

RAM-B-138-UN8U Dashboard High strength composite,
stainless steel components, &
powder coated marine grade
aluminum

The RAM-B-138-UN8U includes a 2.5" diameter round base with the
universal AMPS hole pattern, double socket arm and universal X-Grip® II
clamping cradle for 7" tablets.

Compatible Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to t)
Maximum Width = 5.75"
Depth = 0.875"

Part Number Placement Material

RAP-299-3-UN8U Cup holder High strength composite and
stainless steel components

The RAP-299-3-UN8U includes the RAM-A-CAN™ cup holder base,
double socket arm and universal spring loaded X-Grip® II holder for 7-8”
tablets. Included are support ns that ex and can be trimmed, making
the cup holder base conform to most vehicle cup holders.

Compatible Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to t)

UNIVERSAL X-GRIP® Patents and Trademarks

99www.rammount.com/IP

X-GRIP® MOUNTS

X-GRIP® LARGE 10’’ TABLET HOLDER
Part Number Placement Material

RAM-B-316-1-UN9 Passenger side front High strength composite,
seat bolt. If no seat stainless steel components, &
bolt, a hole must be powder coated marine grade
drilled. aluminum

The RAM-B-316-1-UN9 includes the RAM POD I Universal No-Drill™
vehicle mount, 18” rigid aluminum rod, socket system and universal X-Grip®
III clamping cradle for 10" tablets. The base of the mount connects to your
seat rail without any drilling necessary. The 18" rigid aluminum rod can be
bent to position your device to its optimum viewing location. The X-Grip®
III clamping cradle expands and contracts for perfect t of most 10" tablets
with or without sleeves, as well as some smaller tablets. Please verify
dimensions of your tablet below for compatibility with the X-Grip® III.

Compatible Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"

Part Number Placement Material

RAM-B-166-UN9U Vehicle front High strength composite,
windshield stainless steel components, &
powder coated marine grade
aluminum

The RAM-B-166-UN9U includes a 3.25" twist lock suction cup base, double
socket arm, round base adapter and universal X-Grip® III clamping cradle
for 10" tablets. The suction cup base is designed to have a strong hold on
glass and non-porous plastic surfaces.

Compatibility:
iPad (all Generations)
Samsung 10” tablets
All tablets which t in the compatible dimensions below

Compatible Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"

BEST SMARTPHONE
CAR MOUNT 2013

Part Number Placement Material

RAM-B-101-C-UN9U Flat surface High strength composite,
(dashboard or stainless steel components,
console) & powder coated marine
grade aluminum

The RAM-B-101-C-UN9U includes 2qty 2.5" diameter round bases with the
universal AMPS hole pattern, long double socket arm and universal X-Grip®
III clamping cradle for 10" tablets.

Compatible Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25

100 VEHICLE MOUNTING CATALOG TOUGH-CLAMP™
RAMMOUNT.COM

RAM ®
LIGHT
DUT Y

SOLUTION

RAM® UNIVERSAL TOUGH-CLAMP™

THE SAME RAM® SIMPLICITY AND
DURABILITY, LIGHTNING FAST!

An extra pair of hands is something that almost everyone has wished for at some point.
The RAM® Tough-Clamp™ is the solution. This extremely versatile product from RAM® has
endless applications and will certainly become one of your most valued tools.
The RAM® Tough-Clamp™ includes a 1” ball which can be used to mount a variety
of products utilizing RAM’s vast selection of mounting solutions. Attach your GoPro
Camera, Smartphone, RAM® AQUA BOX® Pro or similar light weight device on almost any

at surfaces and square rails. The RAM® Tough-Clamp™ can be mounted to any surface
on your kayak, boat, motorcycle, aircraft, desk, wheelchair, headrest or any other location
where you simply need an extra hand.

VISIT RAMMOUNT.COM TO SEE THE LATEST
TOUGH-CLAMP™ SYSTEMS!

BEST CAR
ACCESSORY

2013