MITUTOYO Catalogue No MAP 17ST

Height Gage
Optional accessories for height gages

SPECIFICATIONS

Metric Applicable Height Gages
Order No. 192 Series Digimatic Height Gages (192-613-10, 192-614-10, 192-615-10)
07GZA000 570 Series Digimatic Height Gages (570-302, 570-304)
192 Series Dial Height Gages (192-130, 192-131, 192-132, 192-133)
905200 514 Series Vernier Height Gages (514-102, 514-104, 514-106, 514-103, 514-105, 514-107)
574 Series Heightmatic (574-112-1, 574-111-1, 574-110-1)
900390 192 Series Digimatic Height Gages (192-663-10, 192-664-10, 192-665-10)
570 Series Digimatic Height Gages (570-230)
514 Series Vernier Height Gages (514-108, 514-109)
514 Series Vernier Height Gage (514-170)

Contact Sensor Center Probe Depth Gage Attachment

No. 900872 No. 951144 No. 900764 D
• The contact sensor eliminates • Allows quick measurement • Attaches to a height gage

errors caused by non-contact of center-to-center distance for measuring groove and
of the slider with a workpiece between holes. hole depth.
while making measurements. • Measurable hole diameters: • Minimum hole diameter:
When the scriber of a height 1 - 38mm 5.5mm
gage touches a conductive • Mounting position dimension: • Maximum distance from the
workpiece, an indicator 99 mm bottom of the holding bar
lights up to indicate that a to the contact point:
measurement can be taken, 80mm (metric type), 2.95”
which results in consistent (inch type)
results. • Dial indicator contact points
• Magnet is incorporated. are usable. (Refer to pages
• Battery (PR44, 2 pcs F-39.)
required) is not included. • Mounting position
• For precision Black Granite dimension: 99 mm
Surface Plates • Holding bar length: 100mm

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-40
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Height Gage An inspection certificate is supplied as standard.

A standard measuring tool of industry

Linear Height
SERIES 518 — High Performance 2D Measurement System

• Excellent accuracy of (1.1+0.6L/600)μm • Pneumatic full/semi-floating system allows
with 0.1μm/0.4μm resolution/repeatability. adjustment of air-cushion height.
• High-accuracy Height Gage incorporating
a wide range of measurement functions. • Basic statistical functions are provided and,
• To achieve best-in-class accuracy, additionally, RS-232C data output provides
a high-accuracy reflective-type linear the option of evaluating measurement data
encoder and high-accuracy guide are used. externally with SPC software on a PC.
• The TFT LCD provides excellent visibility
and operability. • Backup/Restore of data and measurement
part programs can be implemented using
USB storage devices (FAT16/32 format
compatible).

With power grip
518-352A-21

D

518-351A-21

SPECIFICATIONS

Inch/Metric Model without power grip

Order No. Remarks
518-351E-21 Model for the UK, English manual

Inch/Metric Model with power grip

Order No. Remarks
518-352E-21 Model for the UK, English manual

* Power grip pre-installed models

D-41 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Optional accessories

●For Linear Height and QM-Height ●For Linear Height only

Example of measurements

Thickness measurement (Outside) (●10)
(●12) ●(8) ●(9)
Height measurement (●13)
(Upward facing)

●(1) (●2)
(●6)

Width measurement Height measurement ●(3) (●18) (●15) (●14)
(Inside) (Downward facing) (●16) (●17)
Diameter measurement
(Hole)

●(4)
(●11)

●(1) 12AAC072: Depth probe ● 12AAF668: ø10mm ball probe, ● CMM ball and disk hard probes are
(●2) 12AAC073: ø20mm taper probe L = 82mm (coaxial type) available.
●(3) 12AAA792: Dial indicator (ø8mm stem) ● 12AAF669: ø10mm ball probe,
L = 120mm (coaxial type) ø2 932377A, ø3 932378A
holder ● 12AAF670: ø5mm disk probe ø5 932379A, ø6 932380A
●(4) 12AAA793: Probe extension holder ● 12AAF671: ø10mm disk probe ø10 532328
(●12) 957264: ø14mm disk probe
(85mm/3.3”) (●13) 957265: ø20mm disk probe Disc probe
● 12AAB136: ø10mm cylindrical probe ● 12AAF672: ø1mm ball offset probe ø20 532345, ø30 930803
(●6) 932361: Mu-checker lever head holder* (●14) 12AAA788: ø4mm ball offset probe ● 12AAF712: Battery pack
● ø5mm ball offset probe 05HAA394
The power grip makes it easy to approach the *Additional auxiliary weights are (●15) 12AAA789: ø6mm ball offset probe
workpiece. required (total 4 pcs). (●16) 226116: Test indicator (ø6mm stem)
● 12AAF666: ø1mm ball probe
(coaxial type) adapter
● 12AAF667: ø2mm ruby ball probe ● Sample workpiece 12AAA879
(coaxial type) (●17) 226117: M2 CMM stylus adapter*1
●(8) 957261: ø2mm ball probe (coaxial type) (●18) 226118: M3 CMM stylus adapter*1
(●9) 957262: ø3mm ball probe (coaxial type)
(●10) 957263: ø4mm ball probe (coaxial type)
(●11) 12AAB552: ø10mm ball probe,
L = 55mm (coaxial type)

Various peripheral devices *1 For enabling CMM styli to be used. D
*2 Attachment for fixing the connecting cable is provided as
● 12AAN048*2 Receipt printer (for Japan) standard.
12AAN049*2 Receipt printer (for North America)
12AAN050*2 Receipt printer (for EU; excluded U.K.)
12AAN051*2 Receipt printer (for U.K.)
● 12AAN052: Receipt paper (10-roll set)
● 12AAA804: Cable for page printer (2m)
● 12AAA807: RS-232C cable (2m/80”)
● 12AAG920: RS-232C cable (3m/118”)
● Digimatic cable No.936937 (1m)
No.965014 (2m)

The sample workpiece shown in the above photo is
an optional accessory (12AAA879).

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-42
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Height Gage

A standard measuring tool of industry

QM-Height
SERIES 518 — High Precision ABSOLUTE Digital Height Gage

• Best-in-class accuracy Measurement example
±(2.4+2.1L/600)μm
Pitch Inside diameter measurement
• Newly developed high
accuracy and high resolution (difference in height
ABSOLUTE linear encoder (A) is shown in the
for position detection. Once auxiliary measurement
origin is set, origin setting display)
is not required each time
you turn the power ON Maximum/minimum Height measurement
(except in the case of a large and difference in
environmental temperature height
change).
Main measurement display
• Built-in air-suspension (e.g. height, diameter)
feature mechanism using Auxiliary measurement display
an internal pump enables (e.g. pitch)
smooth movement over a
surface plate. 518-236

(Lower-cost version
without air suspension also
available.)

• With SPC and RS-232C
output.

• Continuous battery life of
300 hours*5 using four
alkaline batteries.

(Also works with four NiMH
AA/HR6 rechargeable
batteries.)

SPECIFICATIONS

Metric Inch/Metric

Code No. 518-230 518-232 518-234 518-236 Code No. 518-231 518-233 518-235 518-237
0 -465mm 0 -715mm 0 -465mm 0 -715mm 0-465mm 0-715mm 0-465mm 0-715mm
Measuring range (stroke) (350mm) (600mm) (350mm) (600mm) Measuring range (0 - 350mm/0-14”) (0 - 600mm/0-24”) (0 - 350mm/0-14”) (0 - 600mm/0-24”)
0.001mm/ 0.001mm/ 0.001mm/ 0.001mm/ Resolution (selectable) 0.001mm/0.005mm/ 0.001mm/0.005mm/ 0.001mm/0.005mm/ 0.001mm/0.005mm/
D Resolution (selectable) 0.005mm 0.005mm 0.005mm 0.005mm .00005”/.0001”/.0002” .00005”/.0001”/.0002” .00005”/.0001”/.0002” .00005”/.0001”/.0002”

Accuracy at Measurement*1 ± (2.4+2.1L/600) µm Accuracy at Measurement*1 ± (2.4+2.1L/600) µm
20˚C Repeatability*1 2 1.8µm 20˚C Repeatability*1 2 1.8µm
Perpendicularity*2 (20˚C) 7µm 12µm 7µm 12µm
Perpendicularity*2 (20˚C) 7µm 12µm 7µm 12µm Guiding method Roller bearing
Guiding method Roller bearing
Drive method Manual (wheel) Drive method Manual (wheel)
Measurement principle Electromagnetic induction absolute encoder
Measurement principle Electromagnetic induction absolute encoder Measuring force 1.5±0.5N
Measuring force 1.5±0.5N
Data output ports Digimatic / USB*3 Data output ports Digimatic / USB*3
Included Included
Air-suspension feature Not included Not included Included Included Air-suspension feature Not included Not included (for positioning only)*4 (for positioning only)*4
(for positioning only)*4 (for positioning only)*4
Alkaline AA/LR6 batteries × 4 (standard accessories) / Alkaline AA/LR6 batteries × 4 (standard accessories) /
Power supply AC adapter (optional accessory) / Supports NiMH (HR6) rechargeable batteries × 4 Power supply AC adapter (optional accessory) / Supports NiMH (HR6) rechargeable batteries × 4

Battery life guidelines*5 LEDA:(pcOopitlnrhlouteixmnr.uit3nho0aau0tnsiohufnuosleul-)rtsime LEDA:(pcOopitlnrhlouteixmnr.uit3nho0aau0tnsiohufnuosleul-)rtsime LEDA:(pOcpoitlrhnlouetxmirn. itu3nho0aau0tnisohfunuosluel-r)tsimeLAEpDt(pic:morOonetxtiihl.nlueu3mro0utinh0saautnhisooefn)uulrls- Battery life guidelines*5 Approx. 300 hours Approx. 300 hours Approx. 300 hours Approx. 300 hours
Approx. 3.3 days when (continuous use) (continuous use) (continuous use) (continuous use)
the air-suspension LED: Other than full- LED: Other than full- LED: Other than full-LED: Other than full-
time illumination time illumination time illumination time illumination

Approx. 100 hours Approx. 100 hours Approx. 3.3 days when Approx. 100 hours Approx. 100 hours Approx. 3.3 days when Approx. 3.3 days when
(continuous use) (continuous use) the air-suspension (continuous use) (continuous use) the air-suspension the air-suspension
LED: Full-time LED: Full-time feature is feature is LED: Full-time LED: Full-time feature is feature is
illumination illumination used for 0.5 hours/day. used for 0.5 hours/day. used for 0.5 hours/day. used for 0.5 hours/day.
illumination illumination

Mass 25kg 29kg 25kg 29kg Mass 25kg 29kg 25kg 29kg
Stroke 350mm type: 280(W)x273(D)x784(H)mm Stroke 350mm type: 280(W)x273(D)x784(H)mm
Size (mm) Stroke 600mm type: 280(W)x273(D)x1016(H)mm Size (mm) Stroke 600mm type: 280(W)x273(D)x1016(H)mm
Operating temperature range (recommended) Operating temperature range (recommended)
Operating temperature range 0 − 40˚C (10 − 30˚C) Operating temperature range 0 − 40˚C (10 − 30˚C)
20 - 80%RH (Must be free from condensation) 20 - 80%RH (Must be free from condensation)
Storage temperature range -10˚C − 50˚C
Storage temperature range -10˚C − 50˚C Storage humidity range 5 - 90% RH (Must be free from condensation)
Storage humidity range 5 - 90% RH (Must be free from condensation)

*1 The indication accuracy and repeatability represent the values obtained from the height measurement of a flat surface using the standard holder with ø5 ball contact point. In the case of diameter,
minimum (maximum) value, circle pitch or difference measurement, measuring errors may be larger than the accuracy ratings listed in the table due to variations in measuring force during a scanning
measurement, which differs from height measurement.

*2 Indicates the value obtained from the measurement of a straight surface placed perpendicular to the the base reference surface using the Lever Head (MLH-321) and Mu-checker (M-411).
*3 Requires special communication driver and software. Consult your local Mitutoyo Sales Office for details. These can be downloaded from the Mitutoyo web site. http://www.mitutoyo.co.jp/eng/
*4 When using a model with the air-suspension feature, it is advisable to use a JIS 1 class, or higher, surface plate. Using on surfaces with scratches or unevenness may prevent the system operating to the specified performance.
*5 Battery life depends on the operating conditions. In particular, it is more economical to use the optional AC adapter to power the instrument if the application requires prolonged use of the air-suspension feature.

D-43 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Depth Gage

A standard measuring tool of industry

ABSOLUTE Digimatic Depth Gage
SERIES 547

• Easy-to-read dial effectively prevents • Allows integration into statistical process
misreading. control and measurement systems for models
with measurement data output connector.
Refer to page A-1.

547-211

SPECIFICATIONS

Metric

Order No. Range Graduation Stroke Accuracy*4 Measuring W Base flatness Contact point*1 Extension rod*2 Indicator*3
0.01mm force 63.5mm T 5μm Provided with a 5 pcs. 543-400B*3
0.001mm 101.6mm carbide-tipped ball 543-390B
547-211 0 - 200mm ±20µm 1.5N 63.5mm 16mm 2μm (10, 20, 30, 30, 100mm)
547-212 12.7mm 101.6mm point Indicator*3
Base (No.21JAA224) Extension rod*2 543-402B*3
547-251 ±5µm W T 4 pcs. 543-392B
547-252 2.5”
4” .63” (.5", 1", 2", 4")
Inch/Metric Range Graduation Stroke Accuracy*4 Measuring 2.5” flatness Coutact point*1
0 - 8” force 4”
Order No.
.0005"/0.01mm ±.001” .0002” Provided with a
547-217S .00005"/0.001mm ±.0002” carbide-tipped ball
547-218S .5” 1.5N point
547-257S (No.21JZA242)
547-258S .00008” D

*1 to *3: Refer to page D-50.
*4: Excluding quantizing error.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-44
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Depth Gage

A standard measuring tool of industry

Depth Micrometer Technical Data
SERIES 329, 129 — Interchangeable Rod Type
Accuracy:
• This type uses interchangeable rods • Measuring rod diameter: ø4mm ±3μm/±.00015” for micrometer head
to enable wide-range measurement. • Measuring rod lock. (Excluding quantizing error)
• Order Nos. 329-250-30, 329-251-30, • Ratchet stop provides constant Flatness of reference face:
329-350-30, and 329-351-30 allow measuring force.
1.3μm (.00005”) for 63.5mm (2.5”) length base,
integration into statistical process control 2μm (.00008”) for 101.6mm (4”) length base
and measurement systems. Flatness of measuring rod face: 0.3μm
Parallelism between reference face and measuring rod face:
(4+R/50)μm, R = Max. measuring length (mm)
Fraction rounded up
±(2+R/75)μm for interchangeable rod,
R = Max. range (mm)
Fraction rounded up
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life*: Approx. 2.4 years under normal use
* Digital models
Scale type: Electromagnetic induction absolute encoder

129-110

329-250-30

SPECIFICATIONS Inch/Metric
Metric
Order No.
Order No. Range Resolution Base No. of rods Range Resolution Base No. of rods Optional accessories for 329-250-30,
Digimatic (LCD) 329-251-30, 329-350-30, and 329-351-30.
Digimatic (LCD) 329-350-30
329-351-30 For details, refer to page A-16.
329-250-30 0 - 150mm 0.001mm 101.6 x 16mm 6 0 - 6” .00005"/0.001mm 4” x .63” 6 Connection cable for 329-250-30, 329-251-30,
329-251-30 0 - 300mm 12 0 - 12” .0001"/0.001mm 12 329-350-30, and 329-351-30
05CZA662: SPC cable with data button (1m)
Metric 05CZA663: SPC cable with data button (2m)
USB Input Tool Direct
Order No. Range Graduation Base No. of rods 06ADV380B: SPC cable for USB-ITN-B (2m)
Connection cables for U-WAVE-T
Analog 02AZD790B: SPC cable for U-WAVE with data button (160mm)
02AZE140B: SPC cable for footswitch
D 129-154 0 - 25mm 63.5 x 16mm 1
129-155 0 - 50mm 101.6 x 16mm 2 Unit: mm
129-109 63.5 x 16mm
129-113 101.6 x 16mm

129-110 0 - 75mm 63.5 x 16mm 3
129-114 0 - 100mm 4
129-111 0.01mm 101.6 x 16mm
129-115 63.5 x 16mm

101.6 x 16mm

129-112 0 - 150mm 63.5 x 16mm 6
129-116 101.6 x 16mm

129-152 0 - 300mm 63.5 x 16mm 12
129-153 101.6 x 16mm

* For the function of Digimatic models 329-250-30, 329-251-30, 329-350-30, and 329-351-30.
These models are not waterproof.

Interchangeable rod (Optional Accessories)
(Check and adjust the origin point before measurement)

L

Range 0 - 25mm 25 - 50mm 50 - 75mm 75 - 100mm 100 - 125mm 125 - 150mm 150 - 175mm 175 - 200mm 200 - 225mm 225 - 250mm 250 - 275mm 275 - 300mm

Analog models Order No. 983501 983503 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535
L 104mm 129mm 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm

Digimatic models Order No. 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535 981781 981782
L 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm 404mm 429mm

D-45 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Technical Data Depth Micrometer 128-101
SERIES 128 128-102
Accuracy: ±3μm (±.00015”) • Measuring rod diameter: ø4mm
Flatness of reference face: • Measuring rod lock is attached.
1.3μm (.00005”) for 63.5mm (2.5”) length base,
2μm (.00008”) for 101.6mm (4”) length base *Measuring rod is attached on the rear side of
Flatness of measuring spindle face: 0.3μm the micrometer.
• Carbide-tipped measuring rod model is
available.
• Ratchet stop provides constant measuring
force.

SPECIFICATIONS

Metric

Order No. Range Graduation Base
63.5 x 16mm
128-101
101.6 x 16mm
128-103*1 0 - 25mm 0.01mm
128-102

128-104*1

*1 with carbide-tipped measuring rod

Vernier Depth Gage • Optional longer extension bases are available.
SERIES 527 (Except for models with measuring ranges of
• Standard gage for depth measurement. 600 and 1000mm)

527-201 D

Base

Base Fine adjustment 527-101

SPECIFICATIONS Remarks
Metric —
—
Order No. Range Vernier reading Accuracy Base (W x T) —
0.05mm ±0.05mm 100 x 6.5mm —
527-201 0 - 150mm ±0.08mm 250 x 10mm —
Vernier reading ±0.10mm
527-202 0 - 200mm 0.02mm ±0.15mm Base (W x T) Remarks
100 x 6.5mm with fine adjsutment
527-203 0 - 300mm Accuracy
±0.03mm
527-204 0 - 600mm

527-205 0 - 1000mm

Metric Range

Order No. 0 - 150mm
527-101 0 - 200mm
527-102

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-46
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Depth Gage

A standard measuring tool of industry

ABSOLUTE Digimatic Depth Gage
SERIES 571

• Coolant proof models achieve IP67 protection level. • Battery: SR44 (1 pc), 938882. For initial
• Enables stable depth measurement with a operational checks (standard accessory)
resolution of 0.01mm. • Optional longer extension bases are available. Optional accessories for IP67 coolant
• ABSOLUTE Digital Caliper (Refer to page D-6 (Except for models with measuring ranges of proof models
for ABSOLUTE function.) 600, 750, 1000mm)
• Sliding operation of models with the For details, refer to page D-32.
measuring ranges 150mm (6"), 200mm Connecting cables
(8") and 300mm (12") is smooth and 05CZA624: SPC cable with data button (1m)
comfortable. 05CZA625: SPC cable with data button (2m)
USB Input Tool Direct
571-251-10 06ADCV380A: SPC cable for USB-ITN-B (2m)
Base Connecting cables for U-WAVE-T
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch

Optional accessories for other than IP67
coolant proof models

For details, refer to page D-32.
959143: Data hold unit
Connecting cables for IT/DP/MUX
959149: SPC cable with data button (1m)
959150: SPC cable with data button (2m)
USB Input Tool Direct
06ADV380C: SPC cable for USB-ITN-C (2m)
Connecting cables for U-WAVE-T
02AZD790C: SPC cable for U-WAVE with data button (160mm)
02AZE140C: SPC cable for footswitch

Base 571-201-30

SPECIFICATIONS

Metric Range Resolution Accuracy* Repeatability Base (W x T) Battery life
±0.02mm 0.01mm 100 x 6mm 5years
D Order No. ±0.03mm 100 x 6.3mm 3.5years
571-201-30 0 - 150mm ±0.02mm 3years
571-202-30 0 - 200mm ±0.03mm 1years
571-203-20 0 - 300mm ±0.05mm
571-251-10** 0 - 150mm ±0.06mm
571-252-10** 0 - 200mm ±0.07mm
571-253-10** 0 - 300mm 0.01mm

571-204-10 0 - 450mm
571-205-10 0 - 600mm
571-206-10 0 - 750mm 250 x 10mm 3years

571-207-10 0 - 1000mm

* Excluding quantizing error
** IP67 Coolant Proof model

Inch/Metric

Order No. Range Resolution Accuracy* Repeatability Base (W x T) Battery life
571-211-30 0 - 6” .0005"/ ±.001"/±0.02mm .0005"/ 3.93” x .23” 5years
571-212-30 0 - 8” 0.01mm ±.001"/±0.02mm 0.01mm 3.5years
571-213-10 0 - 12” ±.0015"/±0.03mm 3years
571-261-10** 0 - 6” ±.001"/±0.02mm 1years
571-262-10** 0 - 8” ±.001"/±0.02mm
571-263-10** 0 - 12” ±.0015"/±0.03mm 9.8” x .39” 3years
571-214-10 0 - 18” ±.002"/±0.05mm
571-215-10 0 - 24” ±.002"/±0.05mm
571-216-10 0 - 30” ±.0025"/±0.06mm
571-217-10 0 - 40” ±.0025"/±0.07mm

* Excluding quantizing error
** IP67 Coolant Proof model

D-47 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Depth Gage
SERIES 527, 571 — Hook End Type

• The end of the main beam is hook-shaped • Digital models display the compensation value
to allow depth and thickness measurements by pressing the OFF switch to allow direct
of a projected portion or lip in a hole, in reading.
addition to standard depth measurement. • Slider operation of the digital models is
• Coolant proof models achieve IP67 protection level. smooth and comfortable.
• Enables stable depth measurement with a • Allows integration into statistical process
resolution of 0.01mm. control and measurement systems for models
•ABSOLUTE Digital Caliper (Refer to page D-6 with measurement data output connector.
for ABSOLUTE function.) Refer to page A-1.
• Battery: SR44 (1 pc), 938882. For initial
operational checks (standard accessory)
• Battery life: Approx. 3 years under normal
use (for digital models)
• Optional longer extension bases are available.

Applications 527-401
Base
L1 = Reading on
depth vernier 571-254-10
L1

L2 = Reading on SPECIFICATIONS D
hook vernier
L2 Metric

L3 = Reading on hook Order No. Range: L1 (L2 and L3) Resolution Accuracy* Base (W×T)
vernier — Reading Digimatic (LCD) 10 - 160mm (0 - 150mm) 0.01mm ±0.03mm 100×6mm
on depth vernier 10 - 210mm (0 - 200mm) 100×6.5mm
L3 571-254-10** 0.05mm ±0.05mm
571-255-10** ±0.08mm Base (W×T)
Optional accessories for digital models 100×6mm
Analog Accuracy*
For details, refer to page A-16. ±0.0015"/ ±0.03mm Base (W×T)
Connection cables for coolant proof models 527-401 10 - 150mm (0 - 150mm) 100×6.5mm
05CZA624: SPC cable with data button (1m) 527-402 10 - 200mm (0 - 200mm) Accuracy
05CZA625: SPC cable with data button (2m) 527-403 10 - 300mm (0 - 300mm) ±0.03mm
USB Input Tool Direct * Excluding quantizing error ** IP67 Coolant Proof model ±0.04mm
06ADCV380A: SPC cable for USB-ITN-B (2m)
Connecting cables for U-WAVE-T Inch/Metric
02AZD790A: SPC cable for U-WAVE with data button (160mm)
02AZE140A: SPC cable for footswitch Order No. Range: L1 (L2 and L3) Resolution
Digimatic (LCD) .4” - 6.4” (0 - 6”) .0005” / 0.01mm
.4” - 8.4” (0 - 8”)
571-264-10 Vernier reading
571-265-10 0.02mm
* Excluding quantizing error

Metric

Order No. Range: L1 (L2 and L3)
Analog 10 - 150mm (0 - 150mm)
10 - 200mm (0 - 200mm)
527-411 10 - 300mm (0 - 300mm)
527-412
527-413

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-48
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Depth Gage

A standard measuring tool of industry

Extension Bases Example of attaching the extension
Optional accessory for Depth Gage base

• Attaches to the base (reference face) • Extension base is three times the length Extension base
plate of a depth gage to extend its span. of the base for models of less than
• Refer to the illustrations at left for 300mm range.
• These extension bases cannot be attached
attachment details. to 0-600mm, 0-1000mm, 0-24”
and 0-40” range models.

SPECIFICATIONS 900372

Metric n
2
Order No. Size L 5 Extension base
4
900370 180mm Depth gage base
900371 260mm Washer
900372 320mm Mounting screw M4

Depth Gage Attachment Example of attaching the extension
Optional Accessory for Calipers base
• Attaching this depth gage attachment to the

depth measurement face of the caliper makes
D depth measurement accurate and secure.

SPECIFICATIONS 050084-10
Metric
Applicable measuring range of caliper
Order No. Size 100mm, 150mm, 200mm, 4”, 6” and 8”
100mm, 150mm, 200mm, 4”, 6” and 8”
050083-10 75mm 300mm and 12”

050084-10 100mm

050085-10 125mm

D-49 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Note: Dial Depth Gage 7214 7222
*1 SERIES 7
Caution should be exercised when exchanging a contact • Optimal for hole, narrow groove and step Example of use
point of a Depth Gage (Dial/Digimatic Indicator)
• If a different size contact point is mounted, displacement measurement.

of the contact point from the base contact surface will 7211
be changed and as a result, measurement range may
not be maintained.
• A contact point cannot be mounted to a Depth Gage, if
its diameter is too large for the hole diameter of the base.
• Parallelism adjustment with the bottom face of the base
is required when mounting a flat contact point such as
the flat/needle or carbide-tipped contact point.
*2
Caution on should be exercised when using an extension rod
• If the total length of the extension rod exceeds 110mm
(4.5") use the instrument in a vertical position (contact
point downward).
• Use a master gage (such as Gauge blocks) to perform
zero-setting when the extension rod is mounted.
(Master gage is an optional accessory.)

Extension rod
Master gage
(optional accessory)
Contact point

*3 7224 7231 7220 and 7221 allow the mounting position
Indicators of a dial indicator to be varied.
• Indicators for a Depth Gage is used for the Depth

Gage. When the indicator is exchanged and extension
rod is connected longer, the contact-point may incline
significantly.
• Code No.543-400B / 543-402B for Depth Gage has a
measuring force less than 1.5N.

D

Metric Range Graduation Accuracy Stroke Measuring Base Mounting position Contact point*1 Extension rod*2 Indicator*3
force of a dial indicator (dial indicator)
Order No. W T Flatness

7210 0 - 10mm 40mm Provided with a needle — 2902SB
7211 point (No.137413) for Depth Gage
7212 ±15µm 10mm 1.4N Provided with a carbide-
7213 0 - 200mm 63.5mm tipped ball point 5 pcs. 2952SB
7214 101.6mm 16mm 1 (No.21JAA224) (10, 20, 30, 30, 100mm) for Depth Gage
7220
7221 0 - 210mm ±30µm 30mm 2.5N 63.5mm Provided with a carbide- 3 pcs.
tipped ball point (30, 60, 90mm)
7222 101.6mm (No.21JAA225)
7223 100mm 2
7224 0 - 200mm 0.01mm 150mm 18mm 5µm 3 Provided with a carbide- 5 pcs.
tipped ball point (10, 20, 30, 30, 100mm)
7231 (No.21JAA224)
2902SB
10mm ø16mm Provided with a needle for Depth Gage
point (No.137413)
0 - 10mm ±15µm 1.4N ø25mm —
ø40mm
1 Provided with a carbide-
tipped ball point
0 - 200mm 5mm 63.5mm 16mm (No.21JAA224: 17mm) 5 pcs. 1162T
(No.21JAA226: 22mm) (10, 20, 30, 30, 100mm) for Depth Gage
(Back plunger type)

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. D-50
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks

Length Standards Brought to You by Mitutoyo
Features and Accuracies

Features of Mitutoyo Gauge Blocks Classification of Gauge Blocks by Shape

Mitutoyo offers 3 types of gauge block for use as length standards: rectangular steel, rectangular ceramic Mitutoyo broadly divides gauge blocks into two categories
(CERA Blocks) and square steel gauge blocks. In addition, rectangular and square protection blocks (1mm according to the block shape.
and 2mm for each) are available in tungsten carbide. Mitutoyo gauge blocks are recognized to be of the
highest quality both here in Japan and abroad, and are available in various grades to meet every need in Rectangular gauge blocks 9 0.20.05 Nominal Square gauge b
respect of working conditions, environment and application. 30 or 35mm 00.3* size

Accuracy * Depends on the nominal size. Hole ø6.7
More than 10mm
As a world-leading precision measuring equipment manufacturer, Mitutoyo is certified by the Japanese government as an 10mm or less
accredited calibration laboratory, which means that the accuracy of its gauge blocks is guaranteed through traceability to
the Metrology Management Center of the National Institute of Advanced Industrial Science and Technology (AIST).

Wringing Rectangular gauge blocks Square gauge blocks
24.1 0.1
aLacpepnitnugrym, eenasaubrliensgussutrofaaccehsieisvoenteheofopMtiimtuutomyofl’astsnpeescsiaalntidess.uOrfuarceadfivnainshcendeteedcehdnifq3o0uroerg3,5admumegv00e.e3*lbolpoecdksoavnedr m9 0o.20.0r5eNothmainnal half 24.1
thussimzeaximize 0.1

the wringing force. Nominal
size

Abrasion Resistance and Dimensional Stability of Steel Blocks Hole ø6.7 mm

High-carbon high-chrome steel is employed to satisfy a variety of the material char*aDcetpeernisdtsiocnstrheeqnoumirienadl sfizoe.r gauge
blocks. Our advanced heat treatment technology for steel blocks, which icnhvaonlvgeesirnepl1Mee0nomargetmtethhodarnoltee1vss0emmrpmteimraet.ure cycling,
simultaneously achieves excellent abrasion resistance and minimizes any

　 9–0.05 Nominal size
–0.2 2-ø10 L×0.211
CERA Blocks

CERA blocks are made of a ceramic material with a superior surface finish, created by Mitutoyo’s ultra-precision
machining techniques, that provides a premium quality block with significant advantages:
Abrasion loss (µm)
035 25±0.5 Airy point 25±0.5
markers
–0.3
1. Corrosion Resistant Coupling holes in long rectangular gauge blocks
Anti-corrosion treatment is not required when handled normally (i.e. with fingers), resulting in simple maintenance
and storage.

2. No Burrs Caused by Accidental Mishandling Selecting Gauge Blocks
Since the CERA Block is very hard, it will not scratch easily and is highly resistant to burrs. If a burr is formed, it can
easily be removed with a ceramic deburring stone (Ceraston). • Select gauge blocks in accordance with the combination
range required.
3. Abrasion Resistant
CERA Blocks have 10 times the abrasion resistance of steel gauge blocks. If a large length is required, add a long block set.
• Select gauge blocks in accordance with the minimum
Abrasion loss data Steel
length step required. Add wear block sets if necessary.
0.4 Tungsten carbide • If a set containing a large number of gauge blocks is

E selected, the number of combination gauge blocks
required for a length is reduced and the number of
0.2 combinations is increased. The accuracy will be retained
and damage will be reduced.
CERA Block • The specific gauge block set for micrometer inspection
and caliper inspection is available (refer to page E-9 for
0 2000 4000 6000 8000 Sliding distance (m) details).
• If using only one length repeatedly, it is a good idea to
4. Dimensionally Stable purchase discrete gauge blocks (refer to page E-11 and
CERA Blocks are free from dimensional change over time. E-12 for details) .
5. Clearly Marked Sizes • The 2mm-based gauge blocks, which take the base of
Black characters, indicating the nominal length, are inscribed by laser and are clearly visible against the white surface the minimum length step as 2mm, are easy to handle
of the block. and will not warp, as compared to the 1mm-based
6. Non-magnetic Nature Prevents Steel Swarf Contamination gauge blocks.
7. High Wringing Force
Superior flatness and surface finish provides maximum wringing force.

E-1 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Mitutoyo Gauge Blocks and Inspection 8. Superior Material Characteristics of CERA Block
Certificates
Property Material CERA Block Steel Tungsten Carbide
A Certificate of Inspection is furnished with all Mitutoyo (ZrO2) (Fe) (WC-Co)
gauge blocks with a serial number on the box (in the case
of sets) and an identification number on each block. The Hardness (HV) 1350 800 1650
deviation of each block from nominal length, at the time
of inspection, is stated. For this inspection, Coefficient of thermal expansion (10-6/K) 9.3±0.5 10.8±0.5 5.5±1.0
each gauge block is measured relative to the upper level
master using a gauge block comparator. Grade K gauge Flexural strength by 3-point bending (MPa) 1270 1960 1960
blocks are measured by a primary measurement method
using an interferometer. Fracture toughness K1c (MPa•m1/2) 7 120 12

Young’s modulus x104 (MPa) 20.6 20.6 61.8

Poisson’s ratio 0.3 0.3 0.2

Specific gravity (Kg/dm3) 6.0 7.8 14.8

Thermal conductivity (W/m•k) 2.9 54.4 79.5

* Ceramics have the advantage of a slow response to temperature changes due to the low thermal conductivity.
However, caution is required when using CERA blocks in the environment of severe temperature change.

9. Closest Expansion Coefficient to Steel
The thermal expansion coefficient of a CERA Block is quite similar to that of a steel gauge block.

Difference
in dimension
(µm) 3

Grade and Application 2 Tungsten carbide

The following table can be used to select the gauge block 1 CERA Block
grade according to usage (specified by DIN861, BS4311, 17 18 19
and JIS B 7506).

Applications Grade 20 21 22 23 Temperature (C)
2
• Mounting tools and cutters –1
• Manufacturing gages 1 or 2
Workshop • Calibrating instruments 1 or 2 –2
use 0 or 1
Differences in size between alternative
K or 0 gauge block materials and steel that are
• Inspecting mechanical parts, –3 obtained when measuring over a length
Inspection tools, etc. K
use • Checking the accuracy of gages of 100mm at each temperature.
• Calibrating instruments
10. Highly Resistant to Dropping and Impact Damage
• Checking the accuracy of gauge The CERA Block material is one of the toughest ceramics. It is extremely difficult to crack
blocks for workshop a CERA block in normal use.
Calibration • Checking the accuracy of gauge
use blocks for inspection
• Checking the accuracy of Features of Square Gauge Blocks
instruments
• Checking the accuracy of gauge 1. Gauge blocks in a stack can be clamped together
Reference blocks for calibration After wringing square gauge blocks, a tie rod can be inserted through
use • For academic research the center hole to clamp the blocks together for extra security.

Constructing a Gauge Block Stack E

The following points should be noted when constructing 2. A height reference standard can easily be made
a gauge block stack: A precision height reference standard can be made easily and
1. Use as few gauge blocks as possible to obtain the inexpensively using accessories such as the plain jaw and block base.

required length by selecting thick blocks wherever 3. A dedicated inspection jig can easily be made
possible. A dedicated inspection jig for periodic inspection of instruments
2. Select the block for the least significant digit first, then can be made easily and inexpensively.
work back through the more significant digits until the
required length is attained. 4. A wide measuring surface with cross-sectional
3. There are multiple combinations for the integer part of dimensions of 24.1 x 24.1mm is available.
a length. To prevent wear as much as possible, do not A square gauge block retains stable orientation both longitudinally and
always use the same gauge blocks. laterally. A wide range of applications is covered, including cutting tool
positioning, angle measurement with a sine bar, taper measurement
Example: Required length = 45.6785mm with a roller, and inspection of depth micrometers.
• For a 1mm-based gauge block set (112 pcs.)
1.0005 Long and Ultra-Thin Gauge Blocks
1.008
1.17 Mitutoyo offers extra-thin gauge blocks from 0.10 mm to 0.99 mm (increments of 0.01 mm)
17.5 as well as long gauge blocks up to 1,000 mm as standard products.

+ ) 25
45.6785mm

• For a 2mm-based gauge block set (112 pcs.)
2.0005
2.008
2.17
14.5

+ ) 25
45.6785mm

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-2
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks

Length Standards Brought to You by Mitutoyo

ACCURACY SPECIFICATIONS: JIS B 7506-2004 (JAPAN) (at 20°C)

Grade K Grade 0 Grade 1 Grade 2

Nominal length (mm) Limit deviation of Tolerance for the Limit deviation of Tolerance for the Nominal length (mm) Limit deviation of Tolerance for the Limit deviation of Tolerance for the
length at any point variation in length length at any point variation in length length at any point variation in length length at any point variation in length

from 0.5 up to 10 ±0.20µm 0.05µm ±0.12µm 0.10µm from 0.5 up to 10 ±0.20µm 0.16µm ±0.45µm 0.30µm

over 10 up to 25 ±0.30µm 0.05µm ±0.14µm 0.10µm over 10 up to 25 ±0.30µm 0.16µm ±0.60µm 0.30µm

over 25 up to 50 ±0.40µm 0.06µm ±0.20µm 0.10µm over 25 up to 50 ±0.40µm 0.18µm ±0.80µm 0.30µm

over 50 up to 75 ±0.50µm 0.06µm ±0.25µm 0.12µm over 50 up to 75 ±0.50µm 0.18µm ±1.00µm 0.35µm

over 75 up to 100 ±0.60µm 0.07µm ±0.30µm 0.12µm over 75 up to 100 ±0.60µm 0.20µm ±1.20µm 0.35µm

over 100 up to 150 ±0.80µm 0.08µm ±0.40µm 0.14µm over 100 up to 150 ±0.80µm 0.20µm ±1.60µm 0.40µm

over 150 up to 200 ±1.00µm 0.09µm ±0.50µm 0.16µm over 150 up to 200 ±1.00µm 0.25µm ±2.00µm 0.40µm

over 200 up to 250 ±1.20µm 0.10µm ±0.60µm 0.16µm over 200 up to 250 ±1.20µm 0.25µm ±2.40µm 0.45µm

over 250 up to 300 ±1.40µm 0.10µm ±0.70µm 0.18µm over 250 up to 300 ±1.40µm 0.25µm ±2.80µm 0.50µm

over 300 up to 400 ±1.80µm 0.12µm ±0.90µm 0.20µm over 300 up to 400 ±1.80µm 0.30µm ±3.60µm 0.50µm

over 400 up to 500 ±2.20µm 0.14µm ±1.10µm 0.25µm over 400 up to 500 ±2.20µm 0.35µm ±4.40µm 0.60µm

over 500 up to 600 ±2.60µm 0.16µm ±1.30µm 0.25µm over 500 up to 600 ±2.60µm 0.40µm ±5.00µm 0.70µm

over 600 up to 700 ±3.00µm 0.18µm ±1.50µm 0.30µm over 600 up to 700 ±3.00µm 0.45µm ±6.00µm 0.70µm

over 700 up to 800 ±3.40µm 0.20µm ±1.70µm 0.30µm over 700 up to 800 ±3.40µm 0.50µm ±6.50µm 0.80µm

over 800 up to 900 ±3.80µm 0.20µm ±1.90µm 0.35µm over 800 up to 900 ±3.80µm 0.50µm ±7.50µm 0.90µm

over 900 up to 1000 ±4.20µm 0.25µm ±2.00µm 0.40µm over 900 up to 1000 ±4.20µm 0.60µm ±8.00µm 1.00µm

ACCURACY SPECIFICATIONS: BS 4311: Part 1: 1993 (UK) (at 20°C)

Grade K Grade 0 Grade 1 Grade 2
Nominal length Tolerance on deviation Nominal length Tolerance on deviation
Tolerance on deviation Tolerance on deviation
(inch) of measured central Parallelism Flatness of measured central Parallelism Flatness (inch) of measured central Parallelism Flatness of measured central Parallelism Flatness
length length length length

over 0 up to 0.4 ±5µin 2µin 2µin ±5µin 4µin 4µin over 0 up to 0.4 ±10µin 6µin 6µin ±20µin 12µin 10µin

over 0.4 up to 1 ±6µin 2µin 2µin ±6µin 4µin 4µin over 0.4 up to 1 ±12µin 6µin 6µin ±25µin 12µin 10µin

over 1 up to 2 ±8µin 3µin 2µin ±8µin 4µin 4µin over 1 up to 2 ±15µin 7µin 6µin ±30µin 12µin 10µin

over 2 up to 3 ±10µin 3µin 2µin ±10µin 5µin 4µin over 2 up to 3 ±20µin 7µin 6µin ±40µin 14µin 10µin

over 3 up to 4 ±12µin 3µin 2µin ±12µin 5µin 4µin over 3 up to 4 ±25µin 8µin 6µin ±50µin 14µin 10µin

ACCURACY SPECIFICATIONS: BS 4311: Part 1: 1993 (UK) (at 20°C)

Grade K Grade 0 Grade 1 Grade 2
Nominal length Tolerance on deviation Nominal length Tolerance on deviation
Tolerance on deviation Tolerance on deviation
(mm) of measured central Parallelism Flatness of measured central Parallelism Flatness (mm) of measured central Parallelism Flatness of measured central Parallelism Flatness
length length length length

over 0 up to 10 ±0.12µm 0.05µm 0.05µm ±0.12µm 0.10µm 0.10µm over 0 up to 10 ±0.25µm 0.16µm 0.15µm ±0.50µm 0.30µm 0.25µm

over 10 up to 25 ±0.15µm 0.05µm 0.05µm ±0.15µm 0.10µm 0.10µm over 10 up to 25 ±0.30µm 0.16µm 0.15µm ±0.60µm 0.30µm 0.25µm

over 25 up to 50 ±0.20µm 0.06µm 0.05µm ±0.20µm 0.10µm 0.10µm over 25 up to 50 ±0.40µm 0.18µm 0.15µm ±0.80µm 0.30µm 0.25µm

E over 50 up to 75 ±0.25µm 0.06µm 0.05µm ±0.25µm 0.12µm 0.10µm over 50 up to 75 ±0.50µm 0.18µm 0.15µm ±1.00µm 0.35µm 0.25µm
over 75 up to 100 ±0.30µm 0.07µm 0.05µm ±0.30µm 0.12µm 0.10µm over 75 up to 100 ±0.60µm 0.20µm 0.15µm ±1.20µm 0.35µm 0.25µm

ACCURACY SPECIFICATIONS: ASME B89.1.9-2002 (USA) (at 20°C)

Grade K Grade 00 Grade 0 Grade 1 Grade 2 Grade K Grade 00 Grade 0 Grade 1 Grade 2
Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance Limit Tolerance
Nominal deviations for the deviations for the deviations for the deviations for the deviations for the Nominal length deviations for the deviations for the deviations for the deviations for the deviations for the
length (inch) of length at variation of length at variation of length at variation of length at variation of length at variation (mm) of length at variation of length at variation of length at variation of length at variation of length at variation

any point in length any point in length any point in length any point in length any point in length any point in length any point in length any point in length any point in length any point in length
up to .05 ±12µin 2µin ±4µin 2µin ±6µin 4µin ±12µin 6µin ±24µin 12µin up to 0.5 ±0.30µm 0.05µm ±0.10µm 0.05µm ±0.14µm 0.10µm ±0.30µm 0.16µm ±0.60µm 0.30µm
over .05 up to .4 ±10µin 2µin ±3µin 2µin ±5µin 4µin ±8µin 6µin ±18µin 12µin over 0.5 up to 10 ±0.20µm 0.05µm ±0.07µm 0.05µm ±0.12µm 0.10µm ±0.20µm 0.16µm ±0.45µm 0.30µm
over .45 up to 1 ±12µin 2µin ±3µin 2µin ±6µin 4µin ±12µin 6µin ±24µin 12µin over 10 up to 25 ±0.30µm 0.05µm ±0.07µm 0.05µm ±0.14µm 0.10µm ±0.30µm 0.16µm ±0.60µm 0.30µm
over 1 up to 2 ±16µin 2µin ±4µin 2µin ±8µin 4µin ±16µin 6µin ±32µin 12µin over 25 up to 50 ±0.40µm 0.06µm ±0.10µm 0.06µm ±0.20µm 0.10µm ±0.40µm 0.18µm ±0.80µm 0.30µm
over 2 up to 3 ±20µin 2µin ±5µin 3µin ±10µin 4µin ±20µin 6µin ±40µin 14µin over 50 up to 75 ±0.50µm 0.06µm ±0.12µm 0.06µm ±0.25µm 0.12µm ±0.50µm 0.18µm ±1.00µm 0.35µm
over 3 up to 4 ±24µin 3µin ±6µin 3µin ±12µin 5µin ±24µin 8µin ±48µin 14µin over 75 up to 100 ±0.60µm 0.07µm ±0.15µm 0.07µm ±0.30µm 0.12µm ±0.60µm 0.20µm ±1.20µm 0.35µm
over 4 up to 5 ±32µin 3µin ±8µin 3µin ±16µin 5µin ±32µin 8µin ±64µin 16µin over 100 up to 150 ±0.80µm 0.08µm ±0.20µm 0.08µm ±0.40µm 0.14µm ±0.80µm 0.20µm ±1.60µm 0.40µm
over 5 up to 6 ±32µin 3µin ±8µin 3µin ±16µin 5µin ±32µin 8µin ±64µin 16µin over 150 up to 200 ±1.00µm 0.09µm ±0.25µm 0.09µm ±0.50µm 0.16µm ±1.00µm 0.25µm ±2.00µm 0.40µm
over 6 up to 7 ±40µin 4µin ±10µin 4µin ±20µin 6µin ±40µin 10µin ±80µin 16µin over 200 up to 250 ±1.20µm 0.10µm ±0.30µm 0.10µm ±0.60µm 0.16µm ±1.20µm 0.25µm ±2.40µm 0.45µm
over 7 up to 8 ±40µin 4µin ±10µin 4µin ±20µin 6µin ±40µin 10µin ±80µin 16µin over 250 up to 300 ±1.40µm 0.10µm ±0.35µm 0.10µm ±0.70µm 0.18µm ±1.40µm 0.25µm ±2.80µm 0.50µm
over 8 up to 10 ±48µin 4µin ±12µin 4µin ±24µin 6µin ±48µin 10µin ±104µin 18µin over 300 up to 400 ±1.80µm 0.12µm ±0.45µm 0.12µm ±0.90µm 0.20µm ±1.80µm 0.30µm ±3.60µm 0.50µm
over 10 up to 12 ±56µin 4µin ±14µin 4µin ±28µin 7µin ±56µin 10µin ±112µin 20µin over 400 up to 500 ±2.20µm 0.14µm ±0.50µm 0.14µm ±1.10µm 0.25µm ±2.20µm 0.35µm ±4.40µm 0.60µm
over 12 up to 16 ±72µin 5µin ±18µin 5µin ±36µin 8µin ±72µin 12µin ±144µin 20µin over 500 up to 600 ±2.60µm 0.16µm ±0.65µm 0.16µm ±1.30µm 0.25µm ±2.60µm 0.40µm ±5.00µm 0.70µm
over 16 up to 20 ±88µin 6µin ±20µin 6µin ±44µin 10µin ±88µin 14µin ±176µin 24µin over 600 up to 700 ±3.00µm 0.18µm ±0.75µm 0.18µm ±1.50µm 0.30µm ±3.00µm 0.45µm ±6.00µm 0.70µm
over 20 up to 24 ±104µin 6µin ±25µin 6µin ±52µin 10µin ±104µin 16µin ±200µin 28µin over 700 up to 800 ±3.40µm 0.20µm ±0.85µm 0.20µm ±1.70µm 0.30µm ±3.40µm 0.50µm ±6.50µm 0.80µm
over 24 up to 28 ±120µin 7µin ±30µin 7µin ±60µin 12µin ±120µin 18µin ±240µin 28µin over 800 up to 900 ±3.80µm 0.20µm ±0.95µm 0.20µm ±1.90µm 0.35µm ±3.80µm 0.50µm ±7.50µm 0.90µm
over 28 up to 32 ±136µin 8µin ±34µin 8µin ±68µin 12µin ±136µin 20µin ±260µin 32µin over 900 up to 1000 ±4.20µm 0.25µm ±1.00µm 0.25µm ±2.00µm 0.40µm ±4.20µm 0.60µm ±8.00µm 1.00µm
over 32 up to 36 ±152µin 8µin ±38µin 8µin ±76µin 14µin ±152µin 20µin ±300µin 36µin
over 36 up to 40 ±160µin 10µin ±40µin 10µin ±80µin 16µin ±168µin 24µin ±320µin 40µin

E-3 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

* Suffix Number ( - n n n ) for Selecting Gauge Blocks with a Calibrated Coefficient of Thermal
Standard Required Expansion

ISO/DIN/JIS • Mitutoyo offers top-quality gauge blocks • Features an accurately calibrated thermal
(steel and ceramic), superior to K class expansion coefficient measured with a
Suffix Grade Inspection Calibration Certificate blocks due to their advanced manufacturing proprietary double-faced interferometer (DFI).
No. Certificate technologies.
JCSS • Each gauge block is calibrated for length on
a highly accurate gauge block interferometer
-01B K O O (GBI) system.

ASME • Available as rectangular gauge blocks in the
range 100 to 500mm.
Suffix Grade Inspection Calibration Certificate
No. Certificate
JCSS

-51B K O O

BS

Suffix Grade Inspection Calibration Certificate
No. Certificate
JCSS

-11B K O O

* Only for 100mm type

SPECIFICATIONS

Inspection Certificate Metric Blocks with CTE
For details, please refer to Leaflet No.
E4334 "Gauge Block with calibrated Order No. (steel)* Order No. (CERA)* Length (mm)
coefficient of thermal expansion".
611681 613681 100
611802 613802 125
611803 613803 150
611804 613804 175
611682 613682 200
611805 613805 250
611683 613683 300
611684 613684 400
611685 613685 500

Grade K class in JIS/ASME/ISO

Uncertainty of thermal expansion coefficient 0.035 × 10-6/K (k = 2)

Uncertainty of length measurement 30nm (k = 2), for 100mm block

* An inspection certificate and a JCSS calibration certificate are supplied as standard.
A calibration report and a calibration certificate for the thermal expansion coefficient are also supplied as standard.

E

ZERO CERA Blocks

An inspection certificate is supplied as standard. • Thermal expansion in the temperature • Complementary ultra-low thermal expansion
For details, please refer to Leaflet No. range 20±1ºC less than 1/500 that of steel and high specific rigidity (Young's modulus/
E4331 "ZERO CERA BLOCK" (0±0.02×10-6/K(20ºC)) specific gravity)

• Almost no secular change both in dimension SPECIFICATIONS
and coefficient of thermal expansion

Metric Blocks

Order No. Length (mm)

JIS/ISO/DIN BS ASME 30
617673-516 50
617673-016 617673-116 617675-516 100
617675-016 617675-116 617681-516 200
617681-016 617681-116 617682-516 300
617682-016 617682-116 617683-516 400
617683-016 617683-116 617684-516 500
617684-016 617684-116 617685-516 600
617685-016 617685-116 617840-516 700
617840-016 617840-116 617841-516 800
617841-016 617841-116 617843-516 900
617843-016 617843-116 617844-516 1000
617844-016 617844-116 617845-516 Above set
617845-016 617845-116 516-771-66
516-771-60 516-771-61

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-4
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo

Metric/Inch Rectangular Gauge Block Sets
SERIES 516

• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs
of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired (larger sets offer more combination
possibilities) and the environmental conditions in which they will be used.
Steel 1mm Base Block Sets

Steel 112-block set Steel 103-block set Steel 76-block set Steel 56-block set

Steel 47-block set Steel 46-block set Steel 34-block set Steel 32-block set

Steel 0.001mm Step Block Sets

Steel 9-block set Steel 9-block set Steel 18-block set

E Steel Long Block Sets Steel Wear Block Sets

Steel 8-block set Steel 2-block set

Steel Thin Block Sets

Steel 9-block set Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Note: Details of the contents of any particular set are given on page E-9. Therefore the company reserves the right to change any or all aspects of any product specification without notice.

E-5

An inspection certificate is supplied as standard.

CERA 1mm Base Block Sets

CERA 112-block set CERA 103-block set CERA 76-block set CERA 56-block set

CERA 47-block set CERA 46-block set CERA 34-block set CERA 32-block set

CERA 0.001mm Step Block Sets

CERA 9-block set CERA 9-block set CERA 18-block set

CERA Long Block Sets 9 –0.05 E
–0.2
Length Unit:mm
2-ø10
L×0.211

035
–0.3

25±0.5 Airy line 25±0.5

CERA 8-block set

CERA Wear Block Sets

Wear block
Wear
block

CERA 2-block set

Note: Details of the contents of any particular set are given on page E-10.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-6
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo

SPECIFICATIONS

1mm Base Block Sets

* Details of the overall sizes for forms of block are given on page E-1 and the accuracy standards to which they are manufactured are given on page E-3. * Suffix Number ( n ) for Selecting
Standard and Certificate Provided
Blocks Order No. Standard / grade available and Suffix No.* Blocks included in set
per set
Steel CERA ISO/DIN/JIS ASME BS Size Step Qty. ISO/DIN/JIS
122 1
—— ——— 1.0005 0.001 9 Inspection Calibration Certificate
516-596 — K: -n0 — — 1.001 - 1.009 0.01 49
516-597 — 0: -n0 — — 1.01 - 1.49 0.1 4 Suffix No. Certificate JCSS
516-598 — 1.6 - 1.9 0.5 49
516-599 — 1: -n0 — — 0.5 - 24.5 10 8 1O —
2: -n0 — — 30 - 100 2 6O O
25, 75 1
112 9 Suffix No. 1: Not available for Grade K sets.
103 516-531 516-541 — K: -n6 — 1.0005 49
88 516-937 516-337 K: -n0 00: -n6 K: -n1 1.001 - 1.009 0.001 49 ASME
87 516-938 516-338 0: -n0 0: -n6 0: -n1 1.01 - 1.49 0.01 4
76 516-939 516-339 1: -n0 1: -n6 1: -n1 0.5 - 24.5 0.5 1 Suffix No. Inspection Calibration Certificate
56 516-940 516-340 2: -n0 2: -n6 2: -n1 25 - 100 25 49 Certificate JCSS
516-533 516-542 — K: -n6 — 49
516-941 516-341 K: -n0 00: -n6 K: -n1 1.005 4 1O —
516-942 516-342 0: -n0 0: -n6 0: -n1 1.01 - 1.49 0.01
516-943 516-343 1: -n0 1: -n6 1: -n1 0.5 - 24.5 0.5 1 6O O
516-944 516-344 2: -n0 2: -n6 2: -n1 9
— — — — — 25 - 100 25 49 Suffix No. 1: Not available for Grade K sets.
516-969 516-369 — — K: -n1 19 Suffix No. 6: Only for Grade K sets.
516-970 516-370 0: -n0 — 0: -n1 1.0005 10
516-971 516-371 1: -n0 — 1: -n1 1.001 - 1.009 0.001 9 BS
516-972 516-372 2: -n0 — 2: -n1 1.01 - 1.49 0.01 49
515-543 — K: -n6 — 0.5 - 9.5 0.5 19 Suffix No. Inspection Calibration Certificate
516-535 516-345 K: -n0 00: -n6 K: -n1 10 - 100 10 10 Certificate JCSS
516-945 516-346 0: -n0 0: -n6 0: -n1 1.001 - 1.009 0.001
516-946 516-347 1: -n0 1: -n6 1: -n1 1.01 - 1.49 0.01 1 1O —
516-947 516-348 2: -n0 2: -n6 2: -n1 0.5 - 9.5 0.5 49 6O O
516-948 — — — — 10 - 100 10 19
— 516-349 K: -n0 — — 4 Suffix No. 1: Not available for Grade K sets.
516-949 516-350 0: -n0 — — 3 Suffix No. 6: Only for Grade K sets.
516-950 516-351 1: -n0 — — 1
516-951 516-352 2: -n0 — — 1.005 0.01 9 Inspection Certificate
516-952 516-544 — K: -n6 — 1.01 - 1.49 0.5 9
516-536 516-353 K: -n0 00: -n6 — 0.5 - 9.5 10 9
516-953 516-354 0: -n0 0: -n6 — 10 - 40 25 24
516-954 516-355 1: -n0 1: -n6 — 50 - 100 0.001 4
516-955 516-356 2: -n0 2: -n6 — 0.01 1
516-956 0.5 0.1 9
516-545 — K: -n6 — 1.001 - 1.009 1 9
47 516-537 516-357 K: -n0 00: -n6 — 1.01 - 1.09 25 24
516-957 516-358 0: -n0 0: -n6 — 1.1 - 1.9 0.01 4
47 516-958 516-359 1: -n0 1: -n6 — 1 - 24 0.1 1
516-959 516-360 2: -n0 2: -n6 — 25 - 100 1 19
46 516-960 — — — — 1.005 25 8
E — 516-361 K: -n0 — K: -n1 1.01 - 1.09 0.01 9
516-961 516-362 0: -n0 — 0: -n1 1.1 - 1.9 0.1 10
34 516-962 516-363 1: -n0 — 1: -n1 1 - 24 1 9
516-963 516-364 2: -n0 — 2: -n1 25 - 100 10 9
516-964 — — — — 0.001 9
— 516-394 K: -n0 — — 1.005 0.01 9
516-994 516-395 0: -n0 — — 1.01 - 1.19 0.1 10
516-995 516-396 1: -n0 — — 1.2 - 1.9 1 1
516-996 516-397 2: -n0 — — 1-9 10 9
516-997 — — — — 10 - 100 0.001 9
— 516-178 K: -n0 — K: -n1 0.01 9
516-128 516-179 0: -n0 — 0: -n1 1.001 - 1.009 0.1 5
516-129 516-180 1: -n0 — 1: -n1 1.01 - 1.09 1 1
516-130 516-181 2: -n0 — 2: -n1 1.1 - 1.9 1
516-131 1-9 0.01 9
— — — — 10 - 100 0.1 9
32 — 516-365 K: -n0 — K: -n1 1 9
516-965 516-366 0: -n0 — 0: -n1 1.0005 10 3
516-966 516-367 1: -n0 — 1: -n1 1.001 - 1.009 1
516-967 516-368 2: -n0 — 2: -n1 1.01 - 1.09
516-968 1.1 - 1.9
1-5
10
1.005
1.01 - 1.09
1.1 - 1.9
1-9
10 - 30
60

Thin Block Sets

Blocks Order No. Standard / grade available and Suffix No.* Blocks included in set
per set Size Step
Steel CERA ISO/DIN/JIS ASME BS 0.10 - 0.50 0.05 Qty.
9 9
516-990 — 0: -n0 — —
516-991 — 1: -n0 — —
516-992 — 2: -n0 — —

E-7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

SPECIFICATIONS

0.001mm Step Block Set 　

* Details of the overall sizes for forms of block are given on page E-1 and the accuracy standards to which they are manufactured are given on page E-3.

Blocks Order No. Standard / grade available and Suffix No.* Blocks included in set
per set Steel CERA Step
ISO/DIN/JIS ASME BS Size 0.001 Qty.
18 0.991 - 0.999 0.001 9
516-973 516-373 K: -n0 — — 1.001 - 1.009 9
516-974 516-374 0: -n0 — —
516-975 516-375 1: -n0 — — 9
516-976 516-376 2: -n0 — —
9
516-981 516-381 K: -n0 — K: -n1 1.001 - 1.009 0.001
516-982 516-382 0: -n0 — 0: -n1
516-983 516-383 1: -n0 — 1: -n1
516-984 516-384 2: -n0 — 2: -n1
9
516-985 516-385 K: -n0 — — 0.991 - 0.999 0.001 9
516-986 516-386 0: -n0 — —
516-987 516-387 1: -n0 — —
516-988 516-388 2: -n0 — —

Long Block Sets Order No. Standard / grade available and Suffix No.* Blocks included in set
Blocks Step
per set Steel CERA ISO/DIN/JIS ASME BS Size 25 Qty.
125 - 175 50 3
8 516-540 516-546 — K: -n6 — 200 - 250 100 2
516-701 516-731 K: -n0 00: -n6 — 300 - 500 3
516-702 516-732 0: -n0 0: -n6 —
516-703 516-733 1: -n0 1: -n6 —
516-704 516-734 2: -n0 2: -n6 —

Wear Block Sets Order No. Standard / grade available and Suffix No.* Blocks included in set
Blocks Size Step Qty.
per set Carbide CERA ISO/DIN/JIS ASME BS 12

2 516-807 516-832 0: -n0 0:-n6 — 22
516-806 516-833 1: -n0 1:-n6 —
2
516-803 516-830 0: -n0 0:-n6 —
516-802 516-831 1: -n0 1:-n6 —

Long Block Sets Order No. Standard / grade available and Suffix No.* Blocks included in set
Blocks Step
per set Steel CERA ISO/DIN/JIS ASME BS Size Qty.
5-7 1 3
8 — 516-564 — K: -n6 — 8, 10, 12 2 3
— 516-741 — 00: -n6 — 16, 20 4 2
516-712 516-742 — 0: -n6 —
516-713 516-743 — 1: -n6 —

Wear Block Sets Order No. Standard / grade available and Suffix No.* Blocks included in set
Blocks Size Step Qty.
per set Carbide CERA ISO/DIN/JIS ASME BS .05 2

2 516-809 516-836 — 0: -n6 — .1 2
516-808 516-837 — 1: -n6 —
2
516-805 516-834 — 0: -n6 —
516-804 516-835 — 1: -n6 —

E

　　
　

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-8
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo
Micrometer Inspection Gauge Block Sets
SERIES 516

• Dedicated gauge block sets for micrometer inspection.
Sets 516-106/7/8 and 516-322/3 are recommended for checking instrumental errors in

micrometers due to the choice of block sizes ensuring that the instrument is checked through a full
rotation of the spindle over the range 0-25 mm (or 0-1”).
Sets 516-115/6/7, 516-165/6 and 516-177 contain blocks in 25 mm (or 1”) steps for aiding
inspection of large micrometers in conjunction with one of the abovementioned sets.
Sets 516-580/1/2, 516-390/1/2 are dedicated to the QuantuMike with its 2mm/rev spindle feed.
Steel

Steel 10-block set Steel 10-block set

Steel 8-block set Steel 10-block set
CERA 10-block set
CERA

CERA 10-block set

E

CERA 8-block set CERA 10-block set SPECIFICATIONS

Micro Checker Gauge Block Sets for Metric Micro Checker (holder only)
Can clamp a stack of gauge Micrometer Inspection
blocks to be used for micrometer A set consisting of a Micro Order No. 516-607
inspection. Checker and gauge blocks
for micrometer inspection. Applicable gauge 516-106, 516-107, 516-108,
516-607 (516-132/3/4/5/6/7) block set 516-156, 516-157, 516-158
(The gauge blocks are optional.)
Applicable gauge 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6,
block size (mm) 20.2, 22.8, 25

E-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

SPECIFICATIONS
Metric Block Sets
* Suffix Number ( n ) for Selecting
Standard and Certificate Provided Blocks Order No. Standard / grade available and Suffix No.* Blocks included in set
per set
Steel CERA ISO/DIN/JIS ASME BS 1.00, 1.25, 1.5, 2, 3, 5, 10, 15, 20, 25,
16 516-111 516-161 25.25, 30, 35, 40, 45, 50mm, Cerastone,
ISO/DIN/JIS 516-112 516-162 0: -n0 — — Optical parallels (t = 12mm, 25mm)
516-113 516-163 1: -n0 — — 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20,
2: -n0 — — 25mm, Optical parallel (t = 12mm)
Suffix No. Inspection Calibration Certificate 10
Certificate JCSS 516-977 — K: -n0 — — 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20,
516-978 516-378 0: -n0 — — 25mm
1O — 516-979 516-379 1: -n0 — — 2.2, 4.8, 7.8, 10.4, 12, 15.2, 17.4, 19.6,
22.6, 25mm
6O O 516-980 516-380 2: -n0 — — 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2,
22.8, 25mm, Optical parallel (t = 12mm)
Suffix No. 1: Not available for Grade K sets. 10 516-103 516-152 0: -n0 0: -n6 — 1.25, 1.50, 1, 2, 3, 5, 10, 15, 20, 25mm,
516-101 516-153 1: -n0 1: -n6 — Micro Checker, Optical parallel (t = 12mm)
ASME — 516-154 2: -n0 — — 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2,
22.8, 25mm, Micro Checker, Optical
Suffix No. Inspection Calibration Certificate 10 516-580 516-390 0: -n0 — — parallel (t = 12mm)
Certificate JCSS 516-581 516-391 25, 50, 75, 100, 125, 150, 175, 200mm
1: -n0 — —
1O — 516-582 516-392 2: -n0 — —

6O O 10 516-106 516-156 0: -n0 — —
516-107 516-157
Suffix No. 1: Not available for Grade K sets. 1: -n0 — —
Suffix No. 6: Only for Grade K sets.
516-108 516-158 2: -n0 — —
10
BS 516-132 516-182 0: -n0 — —
516-133 516-183 1: -n0 — —
Suffix No. Inspection Calibration Certificate 516-134 516-184 2: -n0 — —
1 Certificate JCSS
10 516-135 516-185 0: -n0 — —
O— 516-136 516-186 1: -n0 — —

8 516-137 516-187 2: -n0 — —

Inspection Certificate — 516-547 ­— K: -n6 —
— 516-164 K: -n0 00: -n6 —
516-115 516-165 0: -n0 0: -n6 —
516-116 516-166 1: -n0 1: -n6 —
516-117 516-167 2: -n0 2: -n6 —

SERIES 516 – Caliper Inspection Gauge Block Sets

SPECIFICATIONS
Metric Block Sets

Blocks Order No. Standard / grade available and Suffix No. Blocks included in set
per set Steel CERA
ISO/DIN/JIS ASME BS 5 pcs.: 10.3, 24.5, 50, 75, 100mm,
Ceramic plain jaws, Holder (250mm), Glove
5 — — — — — 4 pcs.: 10, 30, 50, 125mm, Setting ring
— 516-174 2: -10 — — (ø4mm, ø10mm), Pin gage (ø10mm), Glove
4 3 pcs.: 30, 41.3, 131.4mm, Setting ring
516-526 516-566 1: -10 — — (ø4mm, ø25mm), Glove
3 516-527 516-567 2: -10 — — 2 pcs.: 41.3, 131.4mm, Setting ring
(ø20mm), Glove
2 516-124 516-150 1: -10 — —
516-125 516-151 2: -10 — —

516-122 516-172 1: -10 — — E
516-123 516-173 2: -10 — —

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-10
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo
Individual Metric Rectangular Gauge Blocks

• If using only one length repeatedly, it is a good * Suffix Number ( - n n n ) for Selecting
idea to purchase individual gauge blocks. Standard and Certificate Provided

• Nominal sizes which are not included in the chart ISO/DIN/JIS Inspection Calibration Certificate
below can be supplied custom-made on request. Certificate JCSS RvA
Suffix No. Grade O—
• Each Grade K gauge block to ISO/DIN/ O ——
JIS, BS or ASME standard is supplied with -016 K O O—
a Certificate of Calibration which certifies -021 0 O ——
that the gauge block was calibrated by -026 0 O O—
interferometry. -031 1 O ——
-036 1 O O—
-041 2 O
-046 2

SPECIFICATIONS ASME

Metric Blocks Suffix No. Inspection Calibration Certificate
Certificate JCSS
* Details of the overall sizes for forms of block are given on page E-1 and the accuracy standards to which they are manufactured are given on page E-3. -516 Grade O
-521 O —
Length (mm) Order No.* Length (mm) Order No.* Length (mm) Order No.* -531 K O —
Steel CERA Steel CERA Steel CERA -541 00 O —
-551 0 O —
0.1 611821 —­ 0.53 611894 — 0.96 611937 — 1 O
2
0.11 611860 — 0.54 611895 — 0.97 611938 —

0.12 611861 — 0.55 611896 — 0.98 611939 —

0.13 611862 — 0.56 611897 — 0.99 611940 —

0.14 611863 — 0.57 611898 — 0.991 611551 613551 BS

0.15 611822 — 0.58 611899 — 0.992 611552 613552 Suffix No. Inspection Calibration Certificate
Certificate JCSS
0.16 611864 — 0.59 611900 — 0.993 611553 613553 -116 Grade O
-121 O —
0.17 611865 — 0.6 611901 — 0.994 611554 613554 -126 K O O
-131 0 O —
0.18 611866 — 0.61 611902 — 0.995 611555 613555 -136 0 O O
-141 1 O —
0.19 611867 — 0.62 611903 — 0.996 611556 613556 -146 1 O O
2 O
0.2 611823 — 0.63 611904 — 0.997 611557 613557 2

0.21 611868 — 0.64 611905 — 0.998 611558 613558

0.22 611869 — 0.65 611906 — 0.999 611559 613559

0.23 611870 — 0.66 611907 — 1 611611 613611

0.24 611871 — 0.67 611908 — 1.0005 611520 613520

0.25 611824 — 0.68 611909 — 1.001 611521 613521

0.26 611872 — 0.69 611910 — 1.002 611522 613522

0.27 611873 — 0.7 611911 — 1.003 611523 613523

0.28 611874 — 0.71 611912 — 1.004 611524 613524

0.29 611875 — 0.72 611913 — 1.005 611525 613525

0.3 611825 — 0.73 611914 — 1.006 611526 613526

E 0.31 611876 — 0.74 611915 — 1.007 611527 613527
0.75 611916 — 1.008 611528 613528
0.32 611877 —

0.33 611878 — 0.76 611917 — 1.009 611529 613529

0.34 611879 — 0.77 611918 — 1.01 611561 613561

0.35 611826 — 0.78 611919 — 1.02 611562 613562 Inspection Certificate

0.36 611880 — 0.79 611920 — 1.03 611563 613563

0.37 611881 — 0.8 611921 — 1.04 611564 613564

0.38 611882 — 0.81 611922 — 1.05 611565 613565

0.39 611883 — 0.82 611923 — 1.06 611566 613566

0.4 611827 — 0.83 611924 — 1.07 611567 613567

0.41 611884 — 0.84 611925 — 1.08 611568 613568

0.42 611885 — 0.85 611926 — 1.09 611569 613569

0.43 611886 — 0.86 611927 — 1.1 611570 613570

0.44 611887 — 0.87 611928 — 1.11 611571 613571

0.45 611828 — 0.88 611929 — 1.12 611572 613572

0.46 611888 — 0.89 611930 — 1.13 611573 613573

0.47 611889 — 0.9 611931 — 1.14 611574 613574

0.48 611890 — 0.91 611932 — 1.15 611575 613575

0.49 611891 — 0.92 611933 — 1.16 611576 613576

0.5 611506 613506 0.93 611934 — 1.17 611577 613577

0.51 611892 — 0.94 611935 — 1.18 611578 613578

0.52 611893 — 0.95 611936 — 1.19 611579 613579

E-11 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

* Details of the overall sizes for forms of block are given on page E-1 and the accuracy standards to which they are manufactured are given on page E-3.

Length (mm) Order No.* Length (mm) Order No.* Length (mm) Order No.*
Steel CERA Steel CERA Steel CERA

1.2 611580 613580 2.17 611717 — 13 611623 613623

1.21 611581 613581 2.18 611718 — 13.5 611653 613653

1.22 611582 613582 2.19 611719 — 14 611624 613624

1.23 611583 613583 2.2 611720 — 14.5 611654 613654

1.24 611584 613584 2.21 611721 — 15 611625 613625

1.25 611585 613585 2.22 611722 — 15.5 611655 613655

1.26 611586 613586 2.23 611723 — 16 611626 613626

1.27 611587 613587 2.24 611724 — 16.5 611656 613656

1.28 611588 613588 2.25 611725 — 17 611627 613627

1.29 611589 613589 2.26 611726 — 17.5 611657 613657

1.3 611590 613590 2.27 611727 — 17.6 611854 613854

1.31 611591 613591 2.28 611728 — 18 611628 613628

1.32 611592 613592 2.29 611729 — 18.5 611658 613658

1.33 611593 613593 2.3 611730 — 19 611629 613629

1.34 611594 613594 2.31 611731 — 19.5 611659 613659

1.35 611595 613595 2.32 611732 — 20 611672 613672

1.36 611596 613596 2.33 611733 — 20.2 611855 613855

1.37 611597 613597 2.34 611734 — 20.5 611660 613660

1.38 611598 613598 2.35 611735 — 21 611631 613631

1.39 611599 613599 2.36 611736 — 21.5 611661 613661

1.4 611600 613600 2.37 611737 — 22 611632 613632

1.41 611601 613601 2.38 611738 — 22.5 611662 613662

1.42 611602 613602 2.39 611739 — 22.8 611856 613856

1.43 611603 613603 2.4 611740 — 23 611633 613633

1.44 611604 613604 2.41 611741 — 23.5 611663 613663

1.45 611605 613605 2.42 611742 — 24 611634 613634

1.46 611606 613606 2.43 611743 — 24.5 611664 613664

1.47 611607 613607 2.44 611744 — 25 611635 613635

1.48 611608 613608 2.45 611745 — 25.25 611754 613754

1.49 611609 613609 2.46 611746 — 30 611673 613673

1.5 611641 613641 2.47 611747 — 35 611755 613755

1.6 611516 613516 2.48 611748 — 40 611674 613674

1.7 611517 613517 2.49 611749 — 41.3 611857 613857

1.8 611518 613518 2.5 611642 613642 45 611756 613756

1.9 611519 613519 2.6 611750 — 50 611675 613675

2 611612 613612 2.7 611751 — 60 611676 613676

2.0005 611690 — 2.8 611752 — 70 611677 613677

2.001 611691 — 2.9 611753 — 75 611801 613801

2.002 611692 — 3 611613 613613 80 611678 613678 E

2.003 611693 — 3.5 611643 613643 90 611679 613679

2.004 611694 — 4 611614 613614 100 611681 613681

2.005 611695 — 4.5 611644 613644 125 611802 613802

2.006 611696 — 5 611615 613615 131.4 611858 613858

2.007 611697 — 5.1 611850 613850 150 611803 613803

2.008 611698 — 5.5 611645 613645 175 611804 613804

2.009 611699 — 6 611616 613616 200 611682 613682

2.01 611701 — 6.5 611646 613646 250 611805 613805

2.02 611702 — 7 611617 613617 300 611683 613683

2.03 611703 — 7.5 611647 613647 400 611684 613684

2.04 611704 — 7.7 611851 613851 500 611685 613685

2.05 611705 — 8 611618 613618 600 611840 —

2.06 611706 — 8.5 611648 613648 700 611841 —

2.07 611707 — 9 611619 613619 750 611842 —

2.08 611708 — 9.5 611649 613649 800 611843 —

2.09 611709 — 10 611671 613671 900 611844 —

2.1 611710 — 10.3 611852 613852 1000 611845 —

2.11 611711 — 10.5 611650 613650

2.12 611712 — 11 611621 613621 Metric Wear Blocks
2.13 611713 —
2.14 611714 — 11.5 611651 613651 Length (mm) Order No.*

12 611622 613622 Tungsten carbide

2.15 611715 — 12.5 611652 613652 1 612611

2.16 611716 — 12.9 611853 613853 2 612612

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-12
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks

Length Standards Brought to You by Mitutoyo
Rectangular Gauge Blocks Accessories
SERIES 516
• To expand the range of rectangular gauge block (steel and CERA) applications, Mitutoyo

offers the gauge block accessories set. By assembling the items in the set, together with
gauge blocks, you can easily and quickly build up a precision gage.

516-601
(22 pcs)

516-602
(14 pcs)

SPECIFICATIONS

Set

Item Description Item Order No. 22 pcs 14 pcs Qty
1 pc.
E 619002 516-601 516-602
619003
Holder 619004 One pair (2pcs)
619005
Base 619009 1 pc.
619010
Half round jaw 619011 One pair (2pcs)
619012
Plain jaw 619013 1 pc.
Scriber point 619014
Center point 619018
Tram point 619019
Triangular straight edge 619020
619021
619022
619023

* Only 1 pc is supplied for each Order No. However, half round jaw, plain jaw, and tram point are supplied in a pair. (2 pcs).

E-13 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Holder (range of use) 619002 = 15 - 60mm
619003 = 5 - 100mm
Thickness = 15mm
Width = 29.5mm

Clamp 619004 =15 - 160mm
619005 =20 - 250mm
The length ( ) can be adjusted by attaching/removing the adapter.

(range of use)

Gaging a bore using a pair of half round jaws Adapter
and a holder
Marking a workpiece using the base, a holder Base 619009 Finished surface
and the scriber point
35±0.0008 Flatness tolerance of the finished surface 0.5μm
Setting a bore gage using a holder with Flatness tolerance of the bottom surface 1μm
the pair of Type I half-round jaws arranged 72 Holder mount 35±0.0008 105
as flat contact surfaces 9
Half round jaw A C
B
Type I 9
MeasuFriinnigshfeadcesurface
Type II D Flatness tolerance of the finished surface 0.5μm

Finished surface
Holder mounCt

B Measuring face

A D
Finished surface
Unit: mm
Order No. Type Size A B C
619011*1 15.5 45 D
I 5 5±0.0005 20 50 7.5
619012*1 8 8±0.0005 25 75 8.5
12±0.0005 25 125 13
619013*1 II 12 20±0.0005 20.5
619014*1 20

Plain jaw (B type) 619018*1 25°
Flatness tolerance of the finished surface 1µm

160

Measuring and finished surface
19.156 9
8.5 8.5 20
Scriber point 8.5619019 50 E
Finished surface
Flatness tolerance of the finished surface 0.5µm

Center point 9 Finished surface 60°
619020 50
Eccentricity tolerance of the point ±10µm
9 Flatness tolerance of the finished surface 0.5µm
619021*1
Tram point Finished surface 30°
50
9 Eccentricity tolerance of the point ±10µm
Flatness tolerance of the finished surface 0.5µm
Triangular straight edge

60° 16 L 100mm (619022) Straightness tolerance of the edge 1.2µm
(619022) 160mm (N619023)
(61199.0523)

*1 Qty: One pair (2 pcs)

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-14
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks 　

Length Standards Brought to You by Mitutoyo
Accessories for Rectangular Gauge Blocks over 100mm
SERIES 516
• Specially designed for standard size gauge blocks
over 125mm which have two coupling holes on the body:
coupling of two long gauge blocks and attachment of jaws is possible.
• These accessories can also be used for CERA blocks.

516-605
(14 pcs)

SPECIFICATIONS

Set Order No. Individual Item Order No. Item Description Quantity Supplied Nominal size
516-605
619031 Connector A 1 pc.
619032 Connector B 9–0.05 2-ø10 L×0.211
619033 Connector C 3 pcs. –0.2
619034 Connector D 1 pc.
619035 Connector E
619036 Adapter One pair (2pcs)
619009 Base
619013 Half round jaw 1 pc.
619018 Plain jaw
619019 Scriber point
27.5 25±0.5 Airy point 25±0.5
035 markers

–0.3
* Only 1 pc is supplied for each Order No. However, half round jaw, plain jaw, and tram point are supplied in a pair. (2 pcs).

Coupling holes in long gauge blocks

Connector A 619031 Fixed pin

75
Adjustable pin

E

Used for directly coupling Order No. (max.) L Adapter Qty
two long gauge blocks.
Connector B 619032 90mm 126mm 2
Connectors B and C Connector C 619033 200mm 236mm

L

Adapter 619036

Used for clamping jaws to the ends of one or more long gauge Use of B-type connectors in gage construction
blocks in conjunction with adapters (619036). The length
is highly adjustable to accommodate the variable length of a
stack of regular gauge blocks that would be wrung to one of
the long gauge blocks to achieve the required gaging size.

E-15 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Connector D 619034

40 Used for attaching a long gauge
65.5 block directly to the base.

Setting a dial test indicator to a long-gauge- Connector E 619035
block stack attached to the base with a
D-type connector Used for attaching a long gauge block to the
base over a stack of regular gauge blocks wrung
210 = 70 - 175mm between the base and long gauge block. The length
Adapter 619036 (1pc.) is highly adjustable to accommodate the variable
length of the stack.

Base 619009
Finished surface

35±0.0008 Flatness tolerance of the finished surface 0.5μm
Flatness tolerance of the bottom surface 1μm
72 Holder mount 105
619018*2
Plain jaw 25°
9 Finished surface Flatness tolerance of the finished surface 1µm
35±0.0008 20
160

Measuring and finished surface

Half round jaw 619013*2 Holder mount
25
9 Measuring face
12±0.0005mm
8.5 Flatness tolerance of the finished surface 0.5µm
13
Finished surface E
75

Scriber point 619019 50 Flatness tolerance of the finished surface 0.5µm
Finished surface
9

Assortment of accessories for gauge blocks
For inside and outside measurement inspection of 300 to 1000 mm (every 100mm) gauge blocks, select the appropriate combination
of a rectangular gauge block and an accessory.

Items Order No. 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm
Inner Outer Inner Outer Inner Outer Inner Outer Inner Inner Inner Outer Inner Out Inner Outer

Rectangular 200mm 611682 11

gauge block 300mm 611683 1 1 1111
(nominal
400mm 611684 11 1111 11
dimension) 500mm 611685
11 111122

Connector A 619031 1111111111

Connector B*1 619032 2 2 2 2 2 2 2 2

Half round jaws*2 619013 1 1 1 1 1 1 1 1
Adapter 619036 (2) (2) (2) (2) (2) (2) (2) (2)

*1 Provided with adapters (2 pcs)
*2 2 pcs/set

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-16
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo

Metric/Inch Square Gauge Block Sets
SERIES 516 — Metric Block Sets, Long Block Sets, Wear Block Sets

• Square gauge block sets have several unique • Mitutoyo accessory sets are available for
characteristics (refer to page E-2 for details.). expanding the range of square gauge block
applications, especially for rapid assembly of
A wide choice is provided to best match the precision gages.
target applications: sets containing from 2 to
112 blocks are available.

Steel 112-block set Steel 103-block set

Steel 76-block set Steel 47-block set

Wear block set
E

Steel 32-block set

Long block set Tungsten Carbide 2-block set
The wear to a frequently used square gauge block
Steel 8-block set set can be drastically reduced by using tungsten-
carbide wear blocks on the ends of a stack. There are
two available, of nominal dimension 1mm and 2mm.
These blocks are much more wear-resistant than steel
blocks, and they also absorb most of the wear that
would otherwise occur to the blocks in the set due to
contact, and therefore maximize the set's longevity.
Wear blocks are relatively inexpensive and can be
readily discarded when no longer serviceable. To
achieve maximum protection, the same face of each
wear block should always be wrung to a set block, so
the opposite, wearing, face never touches a set block.

E-17 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

SPECIFICATIONS
Metric Block Sets

Blocks Order No. Standard / grade available Blocks included in set
per set Steel CERA
* Suffix Number ( n ) for Selecting ISO/DIN/JIS ASME Size Step Qty.
Standard and Certificate Provided 112
516-437 — — 00: -n6 1.005 1
516-438 — 0: -n0 0: -n6 1.001 - 1.009 0.001 9
ISO/DIN/JIS 516-439 — 1: -n0 1: -n6 1.01 - 1.49 0.01 49
516-440 — 2: -n0 2: -n6 0.5 - 24.5 0.5 49
Suffix No. Inspection Calibration Certificate — —— 25 - 100 25 4
Certificate JCSS —
— 103
1O O 516-441 — — 00: -n6 1.005 1
6O 516-442 — 0: -n0 0: -n6 1.01 - 1.49 0.01 49
516-443 — 1: -n0 1: -n6 0.5 - 24.5 0.5 49
516-444 — 2: -n0 2: -n6 25 - 100 25 4
ASME 76
Suffix No. Inspection Calibration Certificate 516-449 — — 00: -n6 1.005 1
Certificate JCSS 516-450 — 0: -n0 0: -n6 1.01 - 1.49 0.01 49
1 — 516-451 — 1: -n0 1: -n6 0.5 - 9.5 0.5 19
O 516-452 — 2: -n0 2: -n6 10 - 40 10 4
— — —— 50 - 100 25 3
47
516-457 — — 00: -n6 1.005 1
516-458 — 0: -n0 0: -n6 1.01 - 1.09 0.01 9
516-459 — 1: -n0 1: -n6 1.1 - 1.9 0.1 9
516-460 — 2: -n0 2: -n6 1 - 24 1 24
— —— 25 - 100 25 4
32
516-465 — — 00: -n6 1.005 1
516-466 — 0: -n0 0: -n6 1.01 - 1.09 0.01 9
516-467 — 1: -n0 1: -n6 1.1 - 1.9 0.1 9
516-468 — 2: -n0 2: -n6 1-9 1 9
— — —— 10 - 30 10 3
— 60 1

Inspection Certificate Metric Long Block Sets

Blocks Order No. Standard / grade available Blocks included in set
per set Steel CERA
ISO/DIN/JIS ASME Size Step Qty.
8
516-751 — — 00: -n6 125, 150, 175 25 3
516-752 — 0: -n0 0: -n6 200, 250 50 2
516-753 — 1: -n0 1: -n6 300, 400, 500 100 3
516-754 — 2: -n0 2: -n6

Metric Wear Block Sets

Blocks Order No. Standard / grade available Blocks included in set
per set Size Step Qty.
Steel CERA ISO/DIN/JIS ASME
2 1 —2
516-820 — 0: -n0 —
2 516-821 — 1: -n0 — 2 —2

516-822 — 0: -n0 —
516-823 — 1: -n0 —

E

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-18
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks

Length Standards Brought to You by Mitutoyo
Square Gauge Block Accessories Set

• To expand the application of square gauge • Mitutoyo accessory sets are available
blocks, Mitutoyo offers the Gauge Block for expanding the range of square
Accessories Set. Square gauge blocks have gauge block applications, especially
a much broader range of application than for rapid assembly of precision gages.
rectangular gauge blocks due to the central
clamping hole. Also, the accessories included
in the set are sold individually depending on
the application.

516-611

SPECIFICATIONS

Metric

Order No. Included in set Quantity
516-611 Supplied
Half round jaw 2 pcs.
619070 Half round jaw 1 pc.
Plain jaw
619071 Center point 2 pcs.
Scriber point
619072 Base 1 pc.
Flat head screw 2 pcs.
619073 Flat head screw
Slotted head nut
619054 Adjustable tie rod
Adjustable tie rod
619074 Tie rod
Tie rod
619057 Tie rod
Tie rod
619058 Stud
Knurled head screw
619059

619060

619061

E 619062
619063

619064

619065

619056

619066

* 2 pcs of half round jaw, plain jaw, stud, flat head screw, slotted head nut, adjustable tie rod,
and knurled head screw are included in each set. Please note that the above mentioned
Order No. indicates only 1 set.

E-19 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Half round jaw Scriber point 619054 Stud 619056
16
10±0.001 9 ø6.7 Finished surface
R24.7 W 8-32UNC
L ø6.35 P=
ø4.166 8-
2±0.01
24.7Order No. RLW H
H
619070 1.95mm 2mm 33.6mm 5.3mm Slotted head nut
7.8
58619071 4.95mm 5mm 39.9mm 10.3mm 15.8 619059

10 ± 0.0005• Flatness tolerance 0.5μmBase 619074
• Parallelism tolerance of L 0.5μm
• Tolerance of L ±0.5μm

8-32UNC

Plain jaw 619072

39.9 ø6.7 Finished surface KnurledNd=o4.h8.1-3e626aUNPd=C0.s79c3r8ew
A ø6.7 • Parallelism tolerance 1.5μm
30 619066
B ( )• Flatness tolerance 1.5μm 12

The surface within 1.5mm ø9
Finished surface of edge is excluded

• Flatness tolerance 0.12μm 8-32UNC
• Parallelism tolerance 0.12μm
• A and B are finished surfaces Flat head screw

L T•chCleoamnmtipnraiimncgtuimofdøonN=r4roecc..c18aeo6-u3m62smeUpdN=e0Cnb.d7y9e3dt8htoerque
to be applied to the clamping screws
Center point 619073 8-32UNC is approximately 600mN/m. The chart
below shows the approximate length
ø6.7 Finished surface ONd=6or4.d18.9e1-360r265NU7NPo=C.0.7938 L contraction of a 100mm gauge stack
24.7 39.9 619058 using typical torque values.
31.6mm
• Flatness tolerance 0.5μm 15.8mm Driver Contraction
Torque Driver 0.2μm/100mm

600mN·m 0.3μm/100mm
Ordinary Driver
700 - 800mN·m

Adjustable tie rod Tie rod

L L
P×n
M
P
ø6.35
ø6.35n (Number of holes) 8-32UNC

ø6.35No.8-32UNC Stud E
d=4.166 P=0.7938 d=4.166 P=0.7938

P Order No. L

Order No. L M P nn(Number of holes) 619065 19mm
L 619064 38mm
619060 124.5mm 3.85mm 6.35mm 14 8-32UNC 619063 57mm
619061 86.5mm 3.95mm 6.35mm 8 619062 76mm

Accessories used for combiningd=s4.q16u6 aP=r0e.793g8auge blocks

Overall length (mm) Min. 21 36 34 41 45 58 64 72 77 82 91 95 109 117 130 148 121 167 143 160 205 180 223 240 258 295 375

Order No. Included in set Max. 30 43 43 50 60 72 79 88 91 97 107 109 125 135 150 169 180 184 210 255 270 285 288 345 363 445 520

619059 Slotted head nut 11 1

619058 Flat head screw 1 21212 12 1 1 2 2
619057 1 1 21 212122 22 2222222

619056 Stud 1 111 1 1 11112

619065 11 11

619064 Tie rod 11 1 1
619063 1
11 1

619062 1 11111 1

619061 Adjustable tie rod 2222 22
619060
2 2 2222

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-20
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo
Step Master
SERIES 516
• Step Master is a gauge providing 4 small increments in height (steps) constructed from an

assembly of 5 highly accurate steel or ceramic blocks.
• Each step is defined as the difference in height between the center of adjacent blocks,

measured to a resolution of 0.01μm by using an interferometer with an accuracy tolerance
of ±0.20μm.
• Steel and ceramic types are available to suit the application.
• Height differences are measured between the centers of adjacent steps.

Steel type Ceramic type
516-199 516-499

SPECIFICATIONS

Steel type

Order No. 516-198 516-199

Block No. 12345 12345
Cumulative step (μm) 0 10 15 17 18 0 300 400 450 470
Step value between
adjacent blocks (μm) 10 5 2 1 300 100 50 20

Ceramic type 516-498 516-499
12345
Order No. 0 10 15 17 18 12345
Block No. 0 300 400 450 470
Cumulative step (μm) 10 5 2 1
Step value between 300 100 50 20
adjacent blocks (μm)

- -64: Provided with Calibration Certificate
- -84: Provided with Calibration Certificate and Traceability System Chart

E

E-21 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Custom-made Blocks & Gages

• Mitutoyo can manufacture Gauge Blocks and • Special ultra-low expansion ceramic types are
reference gages to your size and design. also available.
• Nominal size range • Gauge Blocks and reference gages to your
· 0.1mm to 1000mm (steel) specifications (section dimensions) are
· 0.5mm to 500mm (ceramic) available, including precision spacers which
• Nominal size increment normally absorb much time and effort to
· 0.0005mm (up to 100mm) manufacture in-house.
· 0.001mm (over 100mm) • Special processing including boring, step
• Cross section (same as the standard product) gaging and special marking are available.
· Nominal length of 10mm or less: 30 x 9mm Consult us for details.
· Nominal length of more than 10mm: 35 x 9mm Note: Please specify that coupling holes are to be supplied
· Square types are also available. if they are required in your long custom-made
gauge blocks. These holes are always supplied with
standard gauge blocks over 100mm but not for
custom-made Gauge Blocks unless specified.

Typical examples of custom-made gauge blocks and reference gages.
Please enquire for price and delivery times for your particular requirements.

(1) (6)
(5)

(4)
(3) (7)

(2) (8)

(9)
(10)

(11) (12) (13)

Ceramic Steel
(1) Square gauge block (2.1005mm) (5) Square gauge block (2.2065mm)
(2) Rectangular gauge block (6.34mm) (6) Square gauge block (10.72mm)
(3) Rectangular gauge block (20.64mm) (7) Rectangular gauge block (31.5mm)
(4) Rectangular gauge block (21.94mm) (8) Rectangular gauge block (10.02mm)
(9) Rectangular gauge block (9.694mm)
(10) Rectangular gauge block (6.156mm) E
(11) Rectangular gauge block (3.603mm)
(12) Rectangular gauge block (1.1505mm)
(13) Rectangular gauge block (0.555mm)

● Cylinder reference block ● Ceramic block
for depth micrometer 20×35×T18

(ø60 x 150mm) ● Ceramic block
46×46×T3.167

( )● Ceramic reference plate ● Ceramic block
50 x 50 x 10mm ø45×T18
flatness 0.3μm

● Ceramic stepped block ● Steel block ● Steel block
(30 x 18 x 5mm, step: 0.15mm) ø13.8×T5.7 15×100×T10

● Steel block 30×30×T1.1

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-22
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Gauge Blocks An inspection certificate is supplied as standard.

Length Standards Brought to You by Mitutoyo

Individual Metric Square Gauge Blocks

• Purchasing individual metric square gauge * Suffix Number ( - n n n ) for Selecting
blocks is a cost-effective way to replace Standard and Certificate Provided
heavily used sizes.
ISO/DIN/JIS
• Please add the suffix number representing
the national standard and grade required at Suffix No. Grade Inspection Calibration Certificate
the end of the Order No. when ordering Certificate JCSS
these items.
-021 0 O —
• Special sizes that are not included
in the charts can be supplied -026 0 O O
custom-made on request.
-031 1 O —
• Mitutoyo accessory sets are
available for expanding the -036 1 O O
range of square gauge block
applications, especially for rapid -041 2 O —

assembly of precision gages. -046 2 O O

ASME Grade Inspection Calibration Certificate
Certificate JCSS
Suffix No.
00 O —
-521
-531 0O —
-541
-551 1O —

2O —

SPECIFICATIONS

Metric Blocks

* Details of the overall sizes for forms of block are given on page E-1 and the accuracy standards to which they are manufactured are given on page E-3.

Length (mm) Order No.* Length (mm) Order No.* Length (mm) Order No.*
Steel CERA
1.33 Steel CERA 13 Steel CERA
1.34 13.5
0.5 614506 — 1.35 614593 — 14 614623 —
1.36 14.5
1 614611 — 1.37 614594 — 15 614653 —
1.38 15.5
1.0005 614520 — 1.39 614595 — 16 614624 —
1.4 16.5
1.001 614521 — 1.41 614596 — 17 614654 —
1.42 17.5
1.002 614522 — 1.43 614597 — 18 614625 —
1.44 18.5
1.003 614523 — 1.45 614598 — 19 614655 — Inspection Certificate
1.46 19.5
1.004 614524 — 1.47 614599 — 20 614626 —
1.48 20.5
1.005 614525 — 1.49 614600 — 21 614656 —
1.5 21.5
1.006 614526 — 1.6 614601 — 22 614627 —
1.7 22.5
1.007 614527 — 1.8 614602 — 23 614657 —
1.9 23.5
1.008 614528 — 2 614603 — 24 614628 —
2.5 24.5
1.009 614529 — 3 614604 — 25 614658 —
3.5 30
1.01 614561 — 4 614605 — 40 614629 —
4.5 50
1.02 614562 — 5 614606 — 60 614659 —
5.5 75
1.03 614563 — 6 614607 — 100 614672 —
6.5 125
1.04 614564 — 7 614608 — 150 614660 —
7.5 175
1.05 614565 — 8 614609 — 200 614631 —
8.5 250
E 1.06 614566 — 9 614641 — 300 614661 —
9.5 400
1.07 614567 — 10 614516 — 500 614632 —
10.5
1.08 614568 — 11 614517 — 614662 —
11.5
1.09 614569 — 12 614518 — 614633 —
12.5
1.1 614570 — 614519 — 614663 —

1.11 614571 — 614612 — 614634 —

1.12 614572 — 614642 — 614664 —

1.13 614573 — 614613 — 614635 —

1.14 614574 — 614643 — 614673 —

1.15 614575 — 614614 — 614674 —

1.16 614576 — 614644 — 614675 —

1.17 614577 — 614615 — 614676 —

1.18 614578 — 614645 — 614801 —

1.19 614579 — 614616 — 614681 —

1.2 614580 — 614646 — 614802 —

1.21 614581 — 614617 — 614803 —

1.22 614582 — 614647 — 614804 —

1.23 614583 — 614618 — 614682 —

1.24 614584 — 614648 — 614805 —

1.25 614585 — 614619 — 614683 —

1.26 614586 — 614649 — 614684 —

1.27 614587 — 614671 — 614685 —

1.28 614588 — 614650 — Metric Wear Blocks

1.29 614589 — 614621 — Length (mm) Order No.
Tungsten carbide
1.3 614590 — 614651 —

1.31 614591 — 614622 — 1 615611

1.32 614592 — 614652 — 2 615612

E-23 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Maintenance Kit for Gauge Blocks
SERIES 516
• Maintenance kit for gauge

blocks includes all the necessary
maintenance tools for removing
burrs and contamination, and
applying anti-corrosion treatment
after use, etc.

Recommendation for regular calibration *Order No. 516-650E; 516-650
Tools and accessories included:
Gauge blocks are often used to define a company’s
standard of length for manufacturing and as such must 1. Anti-corrosion oil (600001) 516-650
be reliable. This means that they need regular calibration (100ml, spray can)
to verify accuracy. (The problem of damage or corrosion 7. Artificial leather mat (B4 size) (600007)
should be addressed during use and blocks seriously Used for both steel and tungsten-carbide Used as a gauge block mat in order to avoid
affected must be discarded immediately.) The frequency gauge blocks.
of calibration depends on the tolerance requirements of scratches on the work table
the work, the amount of use and conditions under which 2. Ceraston (601645)
the gage blocks are used. The most economical cycle for (both sides finished by lapping) 8. Reagent bottle (600008)
any particular set of gauge blocks is best determined by (polyethylene container, 100ml)
studying the calibration history. The list below indicates 3. Optical flat (158-117) Bottle of wiping solution.
timings for a typical initial calibration cycle for the various (ø45, 12mm thickness, JIS Grade 3) (Mitutoyo employs n-Heptane for solvent.)
grades of block. 9. Gloves (600009)
Used to check the wringing of thin gauge blocks Used for handling large gauge blocks. Effective
Application Cycle Grade (reference) and for the presence of burrs.
for the prevention of corrosion and thermal
Reference 1-2 K 4. Tweezers (600004) expansion.
Standard 2 K or 0 Used for handling thin gauge blocks.
Inspection 2 0 or 1 * 516-650E: Excluding anti-corrosive oil (600001)
Shop floor 1 or 2 5. Blower brush (600005) 516-650: including anti-corrosive oil (600001) is for domestic
0.5 - 1 Used for blowing dust from measuring surfaces.
sales only.
As an accredited calibration laboratory, Mitutoyo offers a 6. Cleaning paper (600006) In the case of an order from overseas, place an order for
traceable calibration service for customers’ gauge blocks. (lens paper, 82 x 304mm, 500 pcs)
Our regular calibration service features: Used for wiping off rust preventive oil and 516-650E : excluding anti-corrosive oil, and order anti-
• Gauge blocks manufactured by any maker can be corrosive oil (600001) separateiy.
contamination. Lint free.
calibrated.
• Cleansing and removal of burrs. Ceraston
• Central dimension and dimensional deviations of each SERIES 516 — Accessory for Gauge Block Maintenance

block are measured.
• Calibration results are provided for immediate use and

for building a calibration history of each block.

Removing burrs • Alumina-ceramic abrasive stone for removing E
burrs from hard materials such as ceramics
Figure 1 that ordinary stones cannot handle. 601644
150 (W) ×50 (D) ×20 (H) mm
CERASTON (Or Arkansas stone*1) • Can be used both for steel gauge blocks and
CERA blocks.

• ExceRlluebnbetrin the ease of removing burrs and
durability compared with Arkansas stones.

CERA•SBTOoNth(OsriAdrekasncsaasnstobnee*u1)sed.

Figure 2 (1) Wipe any dust and oil films from the gauge block and the
Ceraston (or Arkansas stone) using a solvent.
nsas stone*1) Rubber 601645
CERASTON (Or Arkansas stone*1) (2) Place the gauge block on the Ceraston so that the measuring 100 (W) ×25 (D) ×12 (H) mm
face that has burrs is on the abrasive surface of the stone.
While applying light pressure, move the gauge block to and
fro about ten times (Fig. 1). Use a block rubber for thin
gauge blocks to apply even pressure (Fig. 2).

(3) Check the measuring face for burrs with an optical flat. If the
burrs have not been removed, repeat step (2). If burrs are too
large, they may not be removed with an abrasive stone. If so,
discard the gauge block.

*1 Mitutoyo does not offer Arkansas stones. E-24

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Reference Gages Technical Data

Length Standards Brought to You by Mitutoyo Square head: Used to set the rule at 90 degrees or 45
Combination Square Set degrees to an edge of a workpiece.
SERIES 180
• Three heads are attachable to the stainless Center head: Used to locate centers of round
workpieces
steel rule (blade), allowing versatile
measurements on various types of workpieces. Protractor head: Used to set the rule at a desired angle
to an edge of a workpiece. Also used
for measuring angles.

180-907B

SPECIFICATIONS
Metric Combination Square Sets

Order No. Size Graduation

180-910B* 300mm 1mm, 0.5mm

* 180-910B consists of blade, square head (180-102B), center head (180-202B) and protractor head (180-301B).

Inch/Metric Combination Square Sets

Order No. Size Graduation

180-907B* 12”/300mm 1/32”, 1/64”,1mm, 0.5mm

* 180-907B consists of blade, square head (180-102B), center head (180-202B) and protractor head (180-301B).

Heads (Individual) Description Remarks
Order No.
180-102B Square head For 300mm (12"), 450mm (18"), 600mm (24") blades
180-202B Center head For 300mm (12"), 450mm (18"), 600mm (24") blades
180-301B Protractor head For 300mm (12"), 450mm (18"), 600mm (24") blades

E

E-25 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Steel Rules
SERIES 182
• Clear graduations on satin-chrome finish.
• Stainless tempered.

182-101 182-201
182-102 182-202

182-103 182-205

182-105 182-302

SPECIFICATIONS
Metric Wide Rigid Rules
Metric Fully-Flexible Rules Inch/Metric Semi-Flexible Rules
Order No. Graduations Range Width
Order No. Graduations Range Width Order No. Graduations* Range Width
182-111 150mm 19mm 182-211 150mm
300mm 25mm 182-231 12mm 182-302 6"/150mm .51"
182-131 1mm, 0.5mm 450mm 30mm 182-251 1mm, 0.5mm 300mm 12mm 182-303 .51"
182-151 (on both faces) 600mm 30mm 182-271 (on both faces) 450mm 19mm 1/16", 1/32", 8"/200mm .59"
19mm 182-305 1/64", 12"/300mm .59"
182-171 600mm 1mm, 0.5mm 20"/500mm .59"
182-307
182-309 40"/1000mm

Inch/Metric Wide Rigid Rules Inch/Metric Fully-Flexible Rules * Engraved on the front side only.
Order No. Order No.
182-105 Graduations Range Width 182-205 Graduations Range Width
182-125 .75" 182-225 .47"
182-145 6"/150mm .98" 182-245 1/32", 1/64", 6"/150mm .47"
182-165 1/32", 1/64", 12"/300mm 1.18" 182-265 1mm, 0.5mm 12"/300mm .75"
182-106 1mm, 0.5mm 18"/450mm 1.18" 182-206 18"/450mm .75"
182-126 .75" 182-226 .47"
24"/600mm .98" 24"/600mm .47"
182-107 182-207
1/50", 1/100", 6"/150mm .75" 1/50", 1/100", 6"/150mm .47"
182-108 1mm, 0.5mm 12"/300mm 182-208 1mm, 0.5mm 12"/300mm
.75" .47"
1/10", 1/100", 6"/150mm 1/10", 1/100", 6"/150mm E
1mm, 0.5mm 1mm, 0.5mm

1/10", 1/50", 6"/150mm 1/10", 1/50", 6"/150mm
1mm, 0.5mm 1mm, 0.5mm

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-26
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Reference Gages

Length Standards Brought to You by Mitutoyo
Thickness Gages
SERIES 184
• Metric thickness gages are available with

tapered leaves.
• Each leaf is marked with its thickness.
• Each leaf is detachable if necessary.

184-304S

SPECIFICATIONS
Metric

Order No. Range Composition of leaves Remarks

184-313S 0.05 - 1mm 28 leaves: 0.05 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm —
184-303S 28 leaves: 0.05 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm Long leaf
20 leaves: 0.05 - 1mm by 0.05mm Long leaf
184-304S 0.05 - 1mm 13 leaves: 0.05 - 0.3mm by 0.05mm, 0.4 - 1mm by 0.1mm
13 leaves: 0.05 - 0.3mm by 0.05mm, 0.4 - 1mm by 0.1mm —
184-305S 0.05 - 1mm 10 leaves: 0.05 - 0.2mm by 0.05mm, 0.3 - 0.8mm by 0.1mm Long leaf
184-301S 10 leaves: 0.05 - 0.2mm by 0.05mm, 0.3 - 0.8mm by 0.1mm
13 leaves: 0.03 - 0.1mm by 0.01mm, 0.2 - 0.5mm by 0.1mm, 0.15mm —
184-306S 0.05 - 0.8mm 13 leaves: 0.03 - 0.1mm by 0.01mm, 0.2 - 0.5mm by 0.1mm, 0.15mm Long leaf
184-308S
—
184-307S 0.03 - 0.5mm Long leaf
184-302S

E

E-27 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Radius Gages
SERIES 186

0.5mm 1mm 1.5mm 2mm 2.5mm 3mm • Radius size is stamped on each gage leaf.
• Each leaf comprises an internal and an
186-110
external radius gage of the same size.
• With locking clamp.

3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 6.5mm 7mm

7.5mm 8mm 8.5mm 9mm 186-105

9.5mm 10mm 10.5mm 11mm SPECIFICATIONS

11.5mm 12mm 12.5mm 13mm Metric Range Composition of leaves Remarks
Order No. 0.4 - 6mm 18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6mm, 1.75 - 3mm by 0.25mm, 3.5 - 6mm by 0.5mm
Composition of leaves for 186-902 186-110 90° arc
0.5 - 13mm 26 leaves: 0.5 - 13mm by 0.5mm 90° arc,
186-902 separate part type
1 - 7mm 34 leaves: 1 - 3mm by 0.25mm 3.5 - 7mm by 0.5mm 180° arc
186-105 7.5 - 15mm 32 leaves: 7.5 - 15mm by 0.5mm 180° arc
186-106 15.5 - 25mm 30 leaves: 15.5 - 20mm by 0.5mm, 21 - 25mm by 1mm 180° arc
186-107

Thread Pitch Gages
SERIES 188

• Thread pitch is stamped on each gage.
• Metric, Unified, and Whitworth screw pitch

gages.

188-101

SPECIFICATIONS
Metric Screw Pitch Gages

Order No. Range Composition of leaves

188-130 0.35 - 6mm 22 leaves: 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
6mm and 60° angle gage
188-122 0.4 - 7mm 21 leaves: 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm

188-121 0.4 - 7mm 18 leaves: 0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm E

Unified Screw Pitch Gages

Order No. Range Composition of leaves
30 leaves: 4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30,
188-111 4 - 42 TPI 32, 34, 36, 38, 40, 42 TPI

Note: Metric and Unified Pitch Gage Set (188-151) is available. It consists of 188-122 (Metric) and 188-111 (Unified).

Metric and Unified Screw Pitch Gage Set

Order No. Range Composition of leaves
51 leaves: Set of 188-122 and 188-111
188-151 0.4 - 7mm/4 - 42 TPI

Whitworth Screw Pitch Gages

Order No. Range Composition of leaves
188-101 4 - 42 TPI 30 leaves: 4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30,
32, 34, 36, 38, 40, 42 TPI
188-102 4 - 60 TPI 28 leaves: 4, 41/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36,
40, 48, 60 TPI

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-28
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Reference Gages Technical Data

Length Standards Brought to You by Mitutoyo
Digital Universal Protractor
SERIES 187

• Data output function makes it easy SPECIFICATIONS Range: -360° to +360°
to gather statistical data. Accuracy: ±2' (±0.03°)
• Can be attached to height gages using Repeatability: 1’
a gage holder (950750, metric) Order No. Blade length Remarks (standard accessory) Resolution: 1’ (0.01°)
• Setting preset value.
• Removable blade. 187-501 150mm Height gage holder (950750) Battery: Lithium Battery
Height gage holder (950750)
187-502 300mm Height gage holder (950749) Battery life: 2,000 hours
Height gage holder (950749)
187-551 6” Function

187-552 12” Presetting

187-501

Universal Bevel Protractor
SERIES 187
• High-precision instrument for accurate angle

measurement on machines, molds, and jigs.
• Can be attached to height gages.
• Graduation: 5'

187-901

SPECIFICATIONS Remarks

Metric w/60°, 45°, 30° edges
w/60°, 45° edges
Order No. Blade length w/60°, 45° edges
187-901 150, 300mm
187-907 150mm

E 187-908 300mm

Bevel Protractor Technical Data
SERIES 187 Range: 90° × 4 (360°)
• Consists of three sheets of stainless steel, Graduation: 5 min. (0° - 90° - 0°)
Blade edge angle: 30° and 60°
the middle one of which is made for angle Mass: 260g
measurements.

SPECIFICATIONS 187-201

Order No. Blade length Remarks
w/60°, 30° edges
187-201 137mm

E-29 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Spring Dividers and Calipers
SERIES 950

FEATURES • Outside Spring Caliper — Contact ends
• Spring Divider — Fully hardened and fully rounded to give good contact
with a workpiece.
tempered joints, spring, washers • Inside Spring Caliper — Ends fully rounded
and divider points.
to give good contact with a workpiece.

950-212 950-222 950-232
Spring divider Outside spring calipers Inside spring calipers

SPECIFICATIONS Order No. Inside spring calipers Range
Outside spring calipers
Spring divider 950-232 6" (150mm)
950-212 950-222 950-233 8" (200mm)
950-213 950-223

Precision Levels
SERIES 960

Technical Data • High-precision longitudinal and transverse SPECIFICATIONS
vials make it possible to check or level
Accuracy of graduations: ±0.7 DIV (960-603), surfaces. Order No. Sensitivity Dimensions (W x D x H)
±0.3 DIV (960-703)
960-603 0.02mm/m 200 x 44 x 38.2mm
200 x 44 x 200mm
960-703 0.02mm/m

960-603 E

960-703

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. E-30
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Digimatic Indicators An inspection certificate is supplied as standard.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ABSOLUTE Solar-Powered Digimatic Indicator ID-SS Technical Data
SERIES 543
Display: 6-digit LCD and sign
• Solar powered • Origin recorded even if display disappears. Scale type: ABSOLUTE electrostatic linear encoder
An environmentally friendly measuring The indicator includes an ABS (absolute) Measuring force: 1.5 N or less
instrument that does not require batteries, sensor that allows the previously set origin to Usable positions: All
eliminating the hassle and cost of battery be restored even if the display disappears due Power supply: Solar battery (for indoor use)
replacement. Can operate under minimum to insufficient light, making it easy to resume Minimum Operating light: 40 lux
light conditions of 40 lux—lower than the measurement. This feature makes ID-SS ideal Note: A built-in reservoir capacitor allows a fully charged
level in a warehouse. for long-time or multi-point measurement. ID-SS to be used for about 3.5 hours under light
• Built-in recharger conditions below the minimum level.
The large-capacity built-in reservoir capacitor The charging time differs depending on the environment,
allows you to use the indicator for long but it usually takes about 1.5 hours for a fully discharged
ID-SS to fully recharge under light conditions of 500 lux.
Maximum response speed: No limit (scan-type measurement

is not supported)
Stem dia: 8mm (ISO/JIS type) or 3/8"(ANSI/AGD type)

periods of time under light conditions below Functions
the minimum level.*
• User-friendly buttons Origin set (zero-set)
All functions can be accessed by using the two or Count direction switching
three large buttons on the front of the indicator. inch/mm conversion (inch/mm models)
Data output
Alarm: Counting value composition error

Insufficient illumination intensity or change

Optional accessories

Lifting lever Lifting knob

543-500

Lifting release

SPECIFICATIONS ISO/JIS type ASME/ANSI/AGD type

Metric

Order No. Range Resolution Overall* Accuracy Repeatability* Remarks
0.001mm 0.003mm Hysteresis* 0.002mm With lug
543-500 12.7mm 0.01mm 0.002mm
543-500B 0.02mm 0.01mm Flat
543-505 0.02mm With lug Optional Accessories
543-505B
Flat • Lifting
Lifting lever No.21EZA198 (ISO/JIS/DIN Type),
Inch/Metric
No.21EZA199 (ASME/ANSI/ AGD Type)
Order No. Range Resolution Overall* Accuracy Repeatability* Remarks Lifting knob No.21EZA105 (ISO/JIS/DIN Type),
Hysteresis* With lug
No.21EZA150 (ASME/ANSI/ AGD Type)
543-501 Flat Lifting cable (No. 540774)
543-501B With lug
543-502 .00005”/0.001mm ±.0001”/0.003mm .0001”/0.002mm .0001”/0.002mm • SPC Cable:
543-502B .5” Flat
543-506 With lug No.905338 (1m)
543-506B .0005/0.01mm ±.0010”/0.02mm .0010”/0.02mm .005”/0.01mm No.905409 (2m)
F 543-507 Flat
543-507B With lug • USB Input Tool Direct (2m) : 06ADV380F
• Connecting Cables for U-WAVE-T (160mm):
Flat
No.02AZD790F
* Quantizing error of ±1 count is excluded. For footswitch 02AZE140F
Refer to page F-46 for details.

• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators

(Refer to pages F-39 to F-32 for details.)
Interchangeable backs for 2 series
(Refer to page F-39 for details.)

• Measuring stands (Refer to page F-61 to F-66 for details.)

• ID-SS can be used in standard work environments.
The following is excerpted from JIS Z9110:2010 General
rules of recommended lighting levels; 5.4 Factories:

Luminance (lux) Location (permissible work)
1500 Very detailed visual work
750 Detailed visual work; design and drawing work
Regular visual work such as work carried out
500 in a factory; monitoring work such as using
instrument panels and control panels
300 Administrative work carried out in a warehouse
Control rooms, bathrooms, and places where
200 manual light work is carried out

150 Work such as loading, unloading, and shifting loads
100 Hallways, corridors, entrances and exits, and warehouses
50 Indoor emergency staircases

F-1 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

Technical Data ABSOLUTE Digimatic Indicator ID-SX
SERIES 543
Display: 6-digit LCD and sign
Scale type: ABSOLUTE electrostatic linear encoder • Cost-effective oriented design These Digimatic indicators employ Mitutoyo’s
Usable orientation: All ID-SX indicators use a button-type battery proprietary ABS (absolute) sensor, which
Power supply: SR44, part No. 938882 for initial makes it possible to restore the origin point
(SR44) and come with the minimum of even if the power is turned off. This eliminates
operational checks (standard accessory) functionality for ease of use. There is a choice the need to perform origin restoration each
Maximum response speed: No limit (scan-type measurement of models in the lineup allowing selection time the power is turned on. Furthermore, this
of 0.01 mm, 0.001 mm or inch-based sensor ensures that overspeed errors do not
is not supported) measurement resolutions. occur, which improves reliability.
Operating temperature range: 0 to 40ºC • IP53 dust/water protection level
Storage temperature range: -10 to 60ºC The models listed below also provide IP53 • Long battery life
dust/water protection level specifications: One button battery (SR44) provides
Functions 543-794/94B/95/95B/96/96B
• ABS (absolute) sensor approximately 20,000 hours of continuous
Origin set (zero-set) : T he display can be zeroed at any use for .0005”/0.01mm resolution models.
chosen position.
543-781 543-790 543-794
Direction switching : T he measuring direction can be ID-S1012X ID-S112X ID-S112PX
switched.
SPECIFICATIONS ISO/JIS/DIN Type ASME/ANSI/AGD Type
in/mm reading (inch/mm models only)
M easurement data output: These indicators have a Metric

measurement data output socket, which makes it Order No. Range Resolution Overall*2 Accuracy*1 Repeatability Back type Measuring Battery life*3 Dust/Water
possible to output measurement to the DP-1VR mini 0.003 mm Hysteresis force (continuous use) protectionlevel*4
processor or to a PC through an input tool. Furthermore, 0.02 mm
the U-WAVE measurement data wireless communication 543-790 With lug 1.5N or less IP42
system can be used to wirelessly input measurement data Flat 2.5N or less IP53
to a PC. 543-790B 12.7 mm 0.001 mm 0.002 mm 0.002 mm 18,000 hours
Error warning 543-794 With lug
Flat
Optional accessories 543-794B

• Lifting 543-781 0.01 mm 0.02 mm 0.01 mm With lug 1.5N or less 20,000 hours IP42
Lifting lever No.21EZA198 (ISO/JIS/DIN Type), 543-781B Flat

No.21EZA199 (ASME/ANSI/ AGD Type) Inch/Metric F
Lifting knob No.21EZA105 (ISO/JIS/DIN Type),
Order No. Range Resolution Overall*2 Accuracy*1 Repeatability Back type Measuring Battery life*3 Dust/Water
No.21EZA150 (ASME/ANSI/ AGD Type) Hysteresis force protection level*4
Lifting cable No. 540774
543-791 With lug
• SPC Cable:
543-791B .00005”/0.001mm Flat
No.905338 (1m) 543-792
No.905409 (2m) 543-792B With lug 1.5N or less IP42
Flat
• USB Input Tool Direct (2m) : 06ADV380F
• Connecting Cables for U-WAVE-T (160mm):

No.02AZD790F
For footswitch: 02AZE140F
Refer to page F-46 for details.

• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators

(Refer to pages F-39 to F-32 for details.)
Interchangeable backs for 2 series
(Refer to page F-39 for details.)

• Measuring stands (Refer to page F-61 to F-66 for details.)

IP53 dust/water protection level

Level 5: Dust protection
While complete protection against invasion of

dust is not provided, protection is adequate
to prevent dust amounts that would inhibit
the prescribed operations and safety of the
electronic equipment.
Level 3: Protection against spraying water
The product suffers no harmful effects when
subjected to water sprayed at an angle of up to
60 degrees on both sides.
For details on the dust/water protection level test
conditions, please refer to IEC 60529:2001 and JIS C
0920:2003.
IP code is the degree of protection against solid foreign
objects and water.
Mitutoyo offers a lineup of coolant proof, ID-N/B
indicators that have excellent resistance to oil, water and
dust and so are suitable for use in environments that
include splashing cutting fluid.

543-793 .0001”/0.001mm ±.0001”/0.003mm .0001”/0.002mm .0001”/0.002mm With lug 18,000 hours
543-793B Flat
543-795 .5”/12.7
543-795B mm .00005”/0.001mm With lug
543-796
Flat 2.5N or less IP53
With lug

543-796B Flat

543-782 With lug

543-782B .0005”/0.01mm ±.0010”/0.02mm .0010”/0.02mm .0005”/0.01mm Flat 1.5N or less 20,000 hours IP42
543-783 With lug

543-783B Flat

*1 These values apply at 20ºC, and do not include ±1 count allowance for quantization error.
*2 Overall magnification and linearity.
*3 The battery life varies, depending on the number of times the Digimatic indicators are used as well as the way it is used. The values listed above are approximations.
*4 This is only valid when the data socket cover is in place. Does not apply if the cover is removed, a lifting accessory is attached, or a connecting cable is attached.

Refer to the ABS Digimatic Indicator ID-S F-2
Series brochure (MAP1397) for details.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Digimatic Indicators An inspection certificate is supplied as standard.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ABSOLUTE Digimatic Indicator ID-CX Technical Data
SERIES 543 — Standard Type

Accuracy: Refer to the list of specifications
• The ABS (absolute) sensor restores the last origin • Battery life of approx. 7,000 hours in (excluding quantizing error)
Resolution:
position automatically when the indicator is continuous use has been achieved with only 0.01mm type 0.01mm
turned on. one battery. 0.001mm type 0.01mm/0.001mm
.0005"/0.01mm type .0005"/0.01mm
Note: Regarding origin setting, refer to “Origin Setting of Digimatic • Equipped with a data output port that .00005 /0.001mm type .0005 /.0001 /.00005 /
Indicators” on page F-16. enables incorporation into measurement 0.01mm/0.001mm
networking and statistical process control
• Thanks to Mitutoyo's ABSOLUTE Linear systems. Display: 6-digit LCD and sign
Encoder, reliability has been increased due to Scale type: ABSOLUTE electrostatic linear encoder
elimination of over-speed errors. Max. response speed: Unlimited (Measurement by scanning

cannot be performed)
Measuring force: Refer to the list of specifications
• Tolerance-judging measurement is available Stem dia.: 8mm (ISO/JIS type) or 3/8 (ANSI/AGD type)
by setting upper and lower limit values. Battery:SR44 (1 pc.), 938882 for initial
operational checks (standard accessory)
Battery life: Approx. 7,000 hours of continuous use
Dust/Water protection level: IP42
Standard
Type Functions
Preset, Zeroset, GO/±NG judgment, Counting
direction switching, Power ON/OFF, Simplified calculation,
Function lock, Data hold, Data output,
inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error

Measuring range Low measuring Measuring range Measuring range Optional Accessories
12.7mm force type 25.4mm 50.8mm • Lifting
543-394B
543-390B 543-470B 543-490B Lifting lever:
No.21EZA198 (12.7mm/.5” ISO/JIS type)
• Large LCD No.21EZA199 (12.7mm/.5” ASME/ANSI/AGD type)
Lifting knob:
The large LCD incorporates 11mm characters giving 1.5 No.21EZA105 (12.7mm/.5” ISO/JIS type)*
times the character area of conventional products (which No.21EZA150 (12.7mm/.5” ASME/ANSI/AGD type)*
display 8.5mm characters) making measurement values No.21EZA197 (25.4mm/1” models)
much easier to read. No.21EZA200 (50.8mm/2” models)
Lifting cable: No.540774
11mm Lifting lever: No.137693 (for measuring range: 25.4 and 50.8mm)
(supplied with 25.4mm and 50.8mm models as standard.)
Actual size • Calculation: f (x) = Ax
• Auxiliary spindle spring:
• Three large buttons Mounting the ID-CX on a measuring jig and setting the
multiplying factor (to any practical value) allows direct indication No.02ACA571 (25.4mm/1” models)**
of size (see example below) without using a conversion table No.02ACA773 (50.8mm/2” models)**
F The popular three-large button design, which is used in products and so improves measurement efficiency.
such as the ABS coolant proof Digimatic indicators ID-N/B, • Lug-on-senter back:

makes buttons easier to press and operations easier to perform. No.101040 (25.4mm/1” and 50.8mm/2”, ISO/JIS type)
No.101306 (25.4mm/1” and 50.8mm/2”, ASME/ANSI/AGD type)
• Power switch * Not available for low measuring force models.
• Data output **Required when orienting the indicator upside down.
(when connected to an
external device) • SPC Cable:
• Data hold
(when no external device is No.905338 (1m)
connected) No.905409 (2m)

• USB Input Tool Direct (2m): 06ADV380F
• Connecting Cables for U-WAVE-T (160mm):

No.02AZD790F
For footswitch (02AZE140F)
Refer to page F-46 for details.

• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators

(Refer to pages F-33 for details.)
Interchangeable backs for 2 series
(Refer to page F-32 for details.)

• Measuring stands (Refer to page F-61 for details.)

Switches between the ABS
(preset) and INC (zeroset)
• Parameter setting mode measurement modes Usage example
Count direction switching, tolerance Note: The measuring jig
judgment setting, resolution switching, scale
factor setting, and function lock setting is not supplied with the
• inch/mm conversion
(inch/mm models) • Function locking ID-CX.

• 330º rotary display Ensures reliability of measurement by locking the settings
to prevent preset function settings from being changed
The display can be 330 330 by mistake.
rotated 330°, allowing
use at a position
where you can easily
read the measurement
value.
Refer to the ABS Digimatic Indicator ID-CX
brochure (MAP1271) for details.

F-3 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Setting measuring force on low
measuring force models

• 543-404/404B/405/405B/406/406B • 543-394/394B/395/395B/396/396B

Spindle Spring Weight Maximum measuring Spindle Spring Weight Maximum measuring
orientation (approximately 0.1N) force orientation (approximately 0.1N) force

Yes Yes 0.5N or less Yes Yes 0.7N or less
Pointing vertically Yes No 0.6N or less
Pointing vertically Yes No 0.4N or less Yes 0.4N or less
downward No Yes 0.3N or less downward No

No No 0.2N or less No No Not guaranteed

Horizontal Yes No 0.3N or less Horizontal Not guaranteed

Note) Operation using configurations other than shown above is Note) Operation using configurations other than shown above is
not guaranteed. not guaranteed.

SPECIFICATIONS ISO/JIS type ASME/ANSI/AGD type
Metric

Order No. (w/ lug, flat-back) Range Resolution Overall accuracy* Measuring force Remarks

543-390 543-390B 12.7mm 1.5N or less —
543-394 543-394B 25.4mm 0.003mm 0.4N - 0.7N Low measuring force
543-470B 50.8mm 0.001mm 1.8N or less —
— 543-490B 12.7mm 0.01mm 0.005mm 2.3N or less —
— 543-400B 25.4mm 0.9N or less —
543-400 543-404B 50.8mm 0.02mm 0.2N - 0.5N Low measuring force
543-404 543-474B 1.8N or less —
— 543-494B 0.04mm 2.3N or less —
—

* Hysteresis: 0.001mm/0.01mm Resolution Type: 0.002mm * Repeatability: 0.001mm/0.01mm Resolution Type: 0.002mm
0.01mm Resolution Type: 0.02mm 0.01mm Resolution Type: 0.02mm

Inch/Metric

Order No. (w/ lug, flat-back) Range Resolution Overall accuracy* Measuring force Remarks
.0001” 1.5N or less —
543-391 543-391B .0002” 1.5N or less —
543-392 543-392B .001” 0.4N - 0.7N
543-395 543-395B .5” .0015” 0.4N - 0.7N Low measuring force
543-396 543-396B .0005"/ .0001"/ 1.8N or less** Low measuring force
— 543-471B .00005"/ .001mm / 1.8N or less**
— 543-472B 2.3N or less** —
— 543-491B 1” 0.01mm 2.3N or less** —
— 543-492B 0.9N or less —
2” 0.9N or less —
0.2N - 0.5N —
543-401 543-401B 0.2N - 0.5N —
543-402 543-402B 1.8N or less** Low measuring force
543-405 543-405B .5” 1.8N or less** Low measuring force
543-406 543-406B .0005”/0.01mm 2.3N or less** —
— 543-475B 2.3N or less** —
— 543-476B 1” —
— 543-495B 2” —
— 543-496B

* Hysteresis: .0005”/.0001”/.0005”/0.001mm/0.01mm * Repeatability: .0005”/.0001”/.0005”/0.001mm/0.01mm
Resolution Type: .00010”/0.002mm Resolution Type: .00010”/0.002mm
.0005”/0.01mm Resolution Type: .0010”/0.02mm .0005”/0.01mm Resolution Type: .0005”/0.02mm
* Quantizing error of ±1 count is excluded
** Applies for a spindle orientation between the spindles

F

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-4
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Digimatic Indicators

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ABSOLUTE Digimatic Indicator ID-N/B Technical Data
SERIES 543 — with Dust/ Water Protection Conforming to IP66
Display: 6-digit LCD and sign
• Our unique ABS sensor restores the last origin • Built-in tolerance judgment function provides Scale type: ABSOLUTE electrostatic linear encoder
position automatically when the indicator is OK, +NG, or –NG judgment of measurement Max. response speed: Unlimited (Measurement by scanning
turned on. with respect to the preset upper and lower
• The chance of overspeed errors has been limit values, indicating the status of a cannot be performed)
eliminated thanks to the ABS sensor. measurement with the appropriate symbol. Measuring force: 2.5N or less (ID-N)
• Rated to IP66: can be used satisfactorily even The symbols can be displayed much larger. 2.0N or less (ID-B)
in adverse environments where the indicator is • Equipped with a data output port that enables Stem dia: 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type)
subject to splashing by cutting fluid or coolant. incorporation into measurement networking Standard contact point: 901312 (ISO/JIS type)
• Slim body design (body width: only 35mm) and statistical process control systems. 21BZB005 (ANSI/AGD type)
is advantageous in multipoint measurement • There is a choice of convenient Interface Battery SR44 (1pc.) : 938882 for initial
situations where space is restricted. The LCD Input Tools which enable the conversion of operational checks (standard accessory)
readout can also be rotated 180° to allow measurement data to keyboard signals and Battery life: Approx. 7,000 hours of continuous use
reading from the most convenient direction. directly input them to cells in off-the-shelf
• Succeeded in digitalization of the Back Plunger spreadsheet software such as Excel. Functions
type widely used for dial indicators for ID-B.
A 5mm-stroke plunger with a higher degree Zero-setting, Presetting, Direction switching, Tolerance
of accuracy has been implemented by judgment, Display hold, Data output,
adopting a direct reading scale for plunger inch/mm conversion (inch/mm models), LCD readout reversal
displacement. Alarm: Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error

Optional accessories
• Lifting knob (only for ID-N)

No.21EZA105 (ISO/JIS type)*
No.21EZA150 (ASME/ANSI/AGD type)*
Spindle can be manually lifted. Remove the spindle cap for
ID-N and attach the lifting knob to the spindle. Note that
water resistance is not maintained in this configuration.
Using the lifting knob

543-575

543-585 Lifting knob

Rated to IP66 water- and Body width 35mm
dust-proofing standard and
oil resistance improved.

• Lug
No.21EZA145 (ISO/JIS type)
No.21EZA146 (ASME/ANSI/AGD type)
• Arm for ID-B (mode-to-order)
• Rubber boot
For oil resistance (NBR) No.02ACA376 (for ID-N)
No.125317 (for ID-B)
For durability (silicon) No.238774 (for ID-N)
No.21EAA212 (for ID-B)
F • SPC cable:
No.21EAA194 (1m)
No.21EAA190 (2m)
• USB Input Tool Direct (2m): No.06ADV380G
• Connecting Cables for U-WAVE-T (160mm)
: No.02AZD790G
For footswitch: No.02AZE140G
Refer to page F-46 for details.
LCD readout reversal function • Bifurcated connecting cable with zero-setting terminal:
No.21EAA210 (1m)
No.21EAA211 (2m)
Two of the wires inside the cable are separated for zero
setting without touching the SET switch on the main body.
Use these cables in combination with commercially available
switches. Zero setting is performed by briefly connecting
these two wires together (less than a second), and ABS
preset & recall by connecting for a second or more.
• Contact points for Mitutoyo’s dial indicators
(Refer to pages F-39 to F-32 for details.)

F-5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

SPECIFICATIONS ISO/JIS type ASME/ANSI/AGD type
Metric

Order No. Range Resolution Accuracy* Remarks
0.01mm 0.02mm
543-570 12.7mm Slim type ID-N
0.01mm / 0.001mm 0.01mm / 0.003mm Back plunger type ID-B
543-580 5.0mm
Slim type ID-N
543-575 12.7mm Back plunger type ID-B

543-585 5.0mm

Inch/Metric

Order No. Range Resolution Accuracy* Remarks
.0005”, 0.01mm .001”
543-571 .5” 0.01mm / 0.001mm Slim type ID-N
543-581 .2” .0005” / .00005” .00012” Back plunger type ID-B
543-576 .5”
543-586 .2” Slim type ID-N
Back plunger type ID-B

*Quantizing error of ±1 count is excluded

Usage examples

SPC cable

Bifurcated connecting cable with zero-setting terminal F

Refer to the ABS Coolantproof Digimatic Indicator ID-N/ID-B F-6
brochure (MAP1255) for details.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Digimatic Indicators An inspection certificate is supplied as standard.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ABSOLUTE Digimatic Indicator ID-C Functions
SERIES 543 — Peak-Value Hold Type
• Run-out/MAX/MIN Hold function enables Peak value hold function (maximum and minimum value)
Runout value Hold function
GO/±NG judgement for peak or difference (difference between maximum/minimum values)
values. Zeroset function (INC system)
• Simple operation of many functions with five Preset function (ABS system)
buttons and status icons. Counting direction switching function
• Wide LCD and new analog bar graph are Tolerance judgement function (P1, P2, P3, and INC can be
now standard on all models. stored)
• Sampling is performed fifty times per second Resolution selection function
for accurate detection of maximum and Simple calculation function f(x)=Ax
minimum values. Analog bar resolution selection function
Key lock function
543-302/543-302B in/mm conversion (inch/mm models)
Display hold function (when external device is connected)
SPECIFICATIONS ISO/JIS type ASME/ANSI/AGD type Data output function
External PC setting input function
Metric Display rotation function (330°)
Low battery/voltage alarm display
Order No. Range Resolution Accuracy*1 Hysteresis*1 Repeatability*1 Power supply Battery life Net weight Error alarm display
(w/lug, flat-back) (normal use)*2
Optional Accessories
543-300 12.7mm 0.001/0.01mm 0.003mm 0.002mm 0.002mm CR2032 x 1 pc. Approx. 1 year 180 g
543-300B 170 g • Lifting
Lifting lever
Inch/Metric No.21EZA198 (ISO/JIS/DIN Type),
No.21EZA199 (ASME/ANSI/ AGD Type)
Order No. Range Resolution Accuracy*1 Hysteresis*1 Repeatability*1 Power supply Battery life Net weight Lifting knob
(w/lug, flat-back) (normal use)*2 No.21EZA105 (ISO/JIS/DIN Type),
No.21EZA150 (ASME/ANSI/ AGD Type)
543-301 .5"/12.7mm .00005/.0001/.0005"/ ±.00010" / .00010" / .00010" / CR2032 x 1 pc. Approx. 1 year 180 g Lifting cable No. 540774
543-301B 0.001/0.01mm 0.003mm 0.002mm 0.002mm 170 g
• SPC Cable:
543-302 195 g No.905338 (1m)
543-302B 170 g No.905409 (2m)

Notes: • USB Input Tool Direct (2m) : No.06ADV380F
1) GO/±NG judgment result is visual and cannot be output. • Connecting Cables for U-WAVE-T (160mm):
2) Max./Min. hold: Sample rate is 50 readings per sec.
Maximum trackable rate of change is 50μm per sec. No.02AZD790F
3) Order numbers suffixed “B” have a plain back. For footswitch: No.02AZE140F
*1 Does not include quantizing error (±1 count). Valid for resolution set to 0.001mm/.00005" and coefficient A=1. Refer to page F-46 for details.
*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide • Digimatic Mini-Processor DP-1VR: 264-504
• Parameter setup kit: 21EZA313
only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months. Note: Parameter setting software (can be downloaded
freely from Mitutoyo website) is also required.

Parameter setup kit
Parameter setting software

F

Refer to the ABS Coolantproof Digimatic Indicator ID-N/ID-B • Contact points for Mitutoyo’s dial indicators
brochure (MAP1395) for details. (Refer to pages F-39 to F-32 for details.)

• Interchangeable backs for 2 series
(Refer to page F-39 for details.)

• Measuring stands.
(Refer to page F-61 to F-66 for details.)

F-7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

An inspection certificate is supplied as standard.

Functions ABSOLUTE Digimatic Indicator ID-C 543-312B
SERIES 543 — Bore Gage Type
Minimum value detection function • Dedicated to inside measurement with
Preset function (3 Preset values can be stored)
Tolerance judgement function (3 sets of upper and lower minimum-value Hold and tolerance
limits can be stored) judgement functions.
Resolution selection function • Measurement data memory function
Analog bar resolution selection function (9 measurement results can be stored)
Key lock function • Simple operation of many functions with five
in/mm conversion (when external device is connected) buttons and status icons.
Display hold function (when external device is connected) • Wide LCD and new analog bar graph are
Data saving/calling function (when external device is now standard on all models.
connected) • Sampling is performed fifty times per second
Data output function for accurate detection of maximum and
External PC setting input function minimum values.
Display rotation function
Low battery/voltage alarm display SPECIFICATIONS ISO/JIS type ASME/ANSI/AGD type
Error alarm display
Metric Accuracy*1 Hysteresis*1 Repeatability*1 Power Battery life Net weight
Optional Accessories Order No.* Range Resolution 0.003mm supply (normal use)*2

• SPC Cable: 543-310B 12.7mm 0.001/0.01mm 0.002 mm 0.002 mm CR2032 Approx. 1 year 170 g
No.905338 (1m) x 1 pc.
No.905409 (2m)
*Flat back only
• USB Input Tool Direct (2m) : No.06ADV380F Inch/Metric
• Connecting Cables for U-WAVE-T (160mm) :
Power Battery life Net
No.02AZD790F supply (normal use)*2 weight
For footswitch : No.02AZE140F
Refer to page F-46 for details.
• Digimatic Mini-Processor DP-1VR: 264-504
• Parameter setup kit : No.21EZA313
Note: Parameter setting software (can be downloaded

freely from Mitutoyo website) is also required.

The ABSOLUTE Digimatic Bore Gage

Order No.* Range Resolution Accuracy*1 Hysteresis*1 Repeatability*1

543-311B .5"/12.7mm .00005/.0001/.0005"/ ±.00010" / 0.003 mm .00010" / .00010" / CR2032 Approx. 1 year 170 g
543-312B 0.001/0.01 mm 0.002 mm 0.002 mm x 1 pc.

*Flat back only
*1 Does not include quantizing error (±1 count). Valid for resolution set to 0.001mm/.00005"
*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide

only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months.
Notes:
1) Min. hold: sample rate is 50 readings/sec; maximum trackable rate of change is 50μm/sec.
2) All instruments in this series are of the flat back type.
3) All instruments in this series can be only used for inside diameter measurement.

ABSOLUTE Digimatic Bore Gages, which integrate F
the display with a bore gage measuring unit, are also
available.
Refer to pages C-33 and C-34 for details.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-8
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

Digimatic Indicators An inspection certificate is supplied as standard.

Comparison measuring instruments which ensure high quality, high accuracy and reliability.

ABSOLUTE Digimatic Indicator ID-C 543-342B Functions
SERIES 543 — Calculation Type
• Calculation function operates on spindle displacement. Calculation function f (x’) = Ax’ + B + Cx’ –1
• Entering the appropriate formula factors for a (x’ = x + offset)
Peak detection function (Max/Min)
fixture dedicated to the application enables direct Runout value Hold function (difference between max.
measurement readout, thereby eliminating any need and min. value motion)
for the conversion tables previously needed for those Peak detection sampling rate (Switchable)
applications where fixtures are typically used.
• Peak-Value Run-out/MAX/MIN Hold enables GO/±NG 10 times/sec. (FAST Mode OFF)
judgement for peak value. 50 times/sec. (FAST Mode ON)
• Simple operation of many functions with five buttons Zeroset function (INC system)
and status icons. Preset function (ABS system)
• Wide LCD and new analog bar graph are now Tolerance judgement function (P1, P2, P3, and INC can
standard on all models. be stored)
• Sampling can be performed fifty times per second for Analog bar resolution selectable function
accurate detection of maximum, minimum and run-out Key lock function
values. Display hold function (when external device is connected)
Data output function
External PC setting input function (330 )
Low battery/voltage alarm display
Error alarm display
Resolution switching function*5

SPECIFICATIONS Resolution (mm) Resolution (inch)
0.0002 0.005 0.1 0.00001 0.0002 0.005
Metric 0.0005 0.01 0.2 0.00002 0.0005 0.01
0.001 0.02 0.5 0.00005 0.001 0.02
0.002 0.05 1 0.0001 0.002 0.05

ISO/JIS type ASME/ANSI/AGD type *5: Since the calculation resolution is one micrometer
(0.001mm), using sub-micrometer resolution settings
Order No.* Range Resolution Accuracy*1 Hysteresis*1 Repeatability*1 Measuring force Power supply Battery life Net may result in the 4th-place digit being unreliable,
(selectable) (normal use)*2 weight particularly when B is set to a very low value
543-340B 12.7mm 1.5N or less 170 g and C =0. It does not change at all with certain
543-590B 25.4mm 12 steps*5 0.003mm 0.002 mm 0.002 mm 1.8N or less*3 CR2032 x 1 pc. Approx. 1 year 190 g combinations of calculation coefficient (for example,
543-595B A = 1, B = C =0). The 3rd-place digit representing
50.8mm 0.006mm 2.3N or less*3 260 g micrometers (if displayed) is always reliable.

* Flat back only

Inch/Metric Optional Accessories

Order No.* Resolution Range Accuracy*1 Hysteresis*1 Repeatability*1 Measuring Power supply Battery life Net • Lifting
(selectable) force (normal use)*2 weight Lifting lever:
543-341B No.21EZA198 (ISO/JIS/DIN Type),
543-342B .5"/12.7mm 1.5N or less 170 g No.21EZA199 (ASME/ANSI/ AGD Type)
543-591B ±.00010" / 0.003 mm Lifting knob:
543-592B 12 steps*5 1”/25.4mm .00010" / 00010" / 1.8N or less*3 CR2032 x 1 pc. Approx. 1 year 190 g No.21EZA105 (ISO/JIS/DIN Type),
0.002 mm 0.002 mm No.21EZA150 (ASME/ANSI/ AGD Type)
Lifting cable : No. 540774
543-596B 2”/50.8mm ±.00025" / 0.006 mm 2.3N or less*3 260 g
543-597B • SPC Cable:
No.905338 (1m)
* Flat back only No.905409 (2m)
Note: All instruments in this series are of the flat back type.
The back is interchangeable with the standard backs for Series 2. • USB Input Tool Direct (2m) : No.06ADV380F
Refer to page F-39 for details of the optional backs. • Connecting Cables for U-WAVE-T (160mm) :
*1 Does not include quantizing error (±1 count). Valid for resolution set to 0.001mm/'.00005" and coefficients A=1, B=0 and C=0.
*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide No.02AZD790F
For footswitch : No.02AZE140F
only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 10 months. Refer to page F-46 for details.
*3 Applies for a spindle orientation between the spindle pointing vertically downward to the spindle horizontal. • Digimatic Mini-Processor DP-1VR : 264-504
*4 The resolution can be selected from one of 12 steps (Refer to table right). • Parameter setup kit : No.21EZA313
Note: Parameter setting software (can be downloaded
F
freely from Mitutoyo website) is also required.
• Contact points for Mitutoyo’s dial indicators

(Refer to pages F-39 to F-32 for details.)
• Measuring stands

(Refer to page F-61 to F-66 for details.)

F-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.