The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

ISOTEX INTERIOR PANELS ISOTEX is a natural and health-preserving (allergy free) quality interior panel for thermal insulation and sound muting (-26dB).

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by , 2016-06-15 07:21:03

SOUND AND THERMAL INSULATION INTERIOR PANELS

ISOTEX INTERIOR PANELS ISOTEX is a natural and health-preserving (allergy free) quality interior panel for thermal insulation and sound muting (-26dB).

SOUND AND THERMAL INSULATION

INTERIOR PANELS

THERMAL INSULATION SOUND INSULATION QUICK AND EASY INSTALLATION

BASED ON 100% NATURAL FORMALDEHYDE FREE RECYCLABLE
WOODFIBRE

ISOTEX interior panels are soſt board based products with decorative paper- or textile covering, for ceilings and walls.
ISOTEX is alternative decoration material to hardboard based panels to get more advantages.

NORDIC WOOD SOLUTIONS

ISOTEX INTERIOR PANELS

ISOTEX is a natural and health-preserving (allergy free) quality
interior panel for thermal insulation and sound muting (-26dB).

ENVIRONMENTALLY FRIENDLY

The technology of producing ISOTEX interior panels is
environmentally friendly and ecological.

Only local quality coniferous wood chips are used as raw material.
The pulp from milling wood chips is mixed with water, pressed into
the shape of a panel and dried. No glue or other chemicals are used
FK•QEB•MOLAR@QFLK•LC•ȳ?OB?L>OAP•w•QEB•K>QRO>I•OBPFKP•FK•QEB•TLLA•>@Q•
as binding agents.

,LQEFKD•?RQ•T>QBO?>PBA•DIRB•FP•RPBA•QL•@LSBO•QEB•ȳ?OB?L>OAP•TFQE•
paper or textiles.

An ISOTEX panel retains all the characteristics of wood - durability,
viscosity and warmth.

ISOTEX has been recognised as belonging to emission class M1
of building materials by The Building Information Foundation RTS.

USAGE

'0-1#5•@BFIFKD•>KA•T>II•M>KBIP•MOLSFAB•AFȲBOBKQ•PLIRQFLKP•FK•?LQE•>•
modern interior as well as a rustic country house.

ISOTEX panels keep the interior temperature of the rooms at a
certain level, either warm or cool, depending on what is required,
but at the same time ensure a natural ventilation of the building.

II• '0-1#5• T>II• M>KBIP• TFQE• >• M>MBO• ȳKFPE• >OB• T>PE>?IB• 0ELRIA•
the need arise, both ceiling and wall panels can be painted (but
LKIV• RPFKD• T>QBO?>PBA• M>FKQ• 4>II• M>KBIP• TFQE• >• QBUQFIB• ȳKFPE•
can, if you so wish, be covered with a water-based lacquer only,
DR>O>KQBBFKD• QEB• @IB>KIFKBPP
• T>PE>?FIFQV• >KA• >• JLOB• BȲLOQIBPP•
maintenance of the textile surfaces.

- Removable top paper layer*

- Brush washable (panels coated with paper)*

- Good UVresistance

>MMIFBP•QL•M>MBO•ȳKFPE•T>II•M>KBIP

EASY TO INSTALL INSTALLATION OF WALL PANELS

ISOTEX wall and ceiling panels can easily be installed on every surface WALL PANELS WITH A PAPER FINISH
in dry rooms, and there is no dust involved. ISOTEX panels are a natural
and “breathing” building material. Therefore, the panels have to be Installation on a wooden framework:
MI>@BA•FK•QEB•OLLJ•QL•?B•ȳKFPEBA•FK•>K•LMBKBA•M>@H>DB••ELROP•MOFLO• 4EBK•@LKPQOR@QFKD•QEB•TLLABK•CO>JB
•VLR•PELRIA•RPB•TLLABK•O>ȷBOP•TFQE•>•PFWB•LC••
to starting work. Glue or staples can be used to install ISOTEX panels U••JJ•$FU•QEB•O>ȷBOP•PL•QE>Q•QEB•AFPQ>K@B•?BQTBBK•QEBJ•JB>PROBA•COLJ•QEB•@BKQOB•
to a wall or a ceiling made of wood or gypsum plasterboard. Only LC•B>@E•O>ȷBO•FP••JJ•MMIV•ALQP•LC•>AEBPFSB•QL•QEB•@BKQOB•LC•QEB•?>@H•PFAB•LC•>•
uneven stone or concrete walls need to be straightened with a wooden M>KBI
•>MMOLUFJ>QBIV•LKB•BSBOV••JJ
•PL•QE>Q•QEB•M>KBI•TLRIA•?B•ȳUBA•QL•QEB•@BKQO>I•
frame, in which case it is possible to hide the electrical wiring under wall batten. Fix the panels to the wall batten using staples (the length of which should
the panels. In addition, attention needs to be paid to the straightness ?B•w•JJ
•J>HFKD•PROB•QE>Q•QEB•AFPQ>K@B•?BQTBBK•QEB•PQ>MIBP•FP•KL•DOB>QBO•QE>K•
of the angles of walls and ceilings, so as to avoid cutting the last row 100 mm.
of panels crookedly. Installation with adhesive:
Apply strips of adhesive to the edges of the back side of a panel (approximately 20
Necessary tools: JJ•COLJ•QEB•BADB•LC•QEB•M>KBI•>KA•QL•QEB•@BKQOB•LC•QEB•M>KBI
•LKB•PQOFM•>ȷBO•BSBOV•
200 mm. Press the panel to the wall so that it is some distance away from the previous
· Square panel. Then, slide it sideways to level the adhesive and to install the panel without any
· Tape measure additional support.
· Carpet knife
· Glue gun WALL PANELS WITH A TEXTILE FINISH

(use a fast-setting construction adhesive, Installation with adhesive:
such as Soudal 48A) $FU•QEB••U••JJ•TLLABK•O>ȷBOP•PL•QE>Q•QEB•AFPQ>K@B•?BQTBBK•QEBJ•JB>PROBA•COLJ•
QEB•@BKQOB•LC•B>@E•O>ȷBO•QL•QEB•@BKQOB•LC•QEB•KBUQ•FP••JJ•'C•QEB•T>II•FP•PQO>FDEQ
•QEBOB•
· Staple gun is no need to install a wooden frame. Apply strips of adhesive to the edges of the back
side of a panel (approximately 20 mm from the edge of the panel) and to the centre of
ISOTEX panels can easily be cut QEB•M>KBI
•LKB•PQOFM•>ȷBO•BSBOV••JJ•ÅOBPP•QEB•M>KBI•QL•QEB•T>II•PL•QE>Q•FQ•FP•PLJB•
with a sharp carpet knife. distance away from the previous panel. Then, slide it sideways to level the adhesive and
to install the panel without any additional support.
ATTENTION! Properly installed ISOTEX ceiling or wall panels are durable. No cracks will appear on the
CUT THE PANEL ON THE COVERED PROC>@B•LC•QEB•M>KBIP•w•LKB•LC•QEB•JLPQ•@LJJLK•y?B>RQV•ȴ>TPz•LC•@BFIFKDP•>KA•T>IIP•
SIDE! made of other materials.
Additional information and an installation video on ISOTEX panels can be found on the
web site www.isoplaat.eu

INSTALLATION OF CEILING PANELS

Installation on a
wooden frame:
When constructing the wooden
frame, you should use wooden
O>ȷBOP• TFQE• >• PFWB• LC• • U• • JJ•
$FU• QEB• O>ȷBOP• PL• QE>Q• QEB• AFPQ>K@B•
between them (measured from the
@BKQOB• LC• B>@E• O>ȷBO• FP• • JJ•
Fix the panels on the frame using
staples (the length of which should
?B• w• JJ
• J>HFKD• PROB• QE>Q•
the distance between the staples
is no greater than 100 mm. The
LRQBOJLPQ•M>KBI•FP•QL•?B•ȳUBA•LK•QEB•

frame with nails, screws or adhesive so that the mould installed later
would cover them.
1EB• M>KBIP• >OB• >IT>VP• ȳUBA• >ILKD• QEB• CO>JBTLOH• LC• O>ȷBOP• #SBK•
better results are achieved when the gaps between the longer edges
LC•QEB•M>KBIP•>OB•ȳUBA•FK•QEB•AFOB@QFLK•LC•QEB•C>IIFKD•IFDEQ•

Installation with adhesive:
Apply a strip of adhesive on the back side of a panel, approximately
30 mm from the edge of the panel, and apply dots of adhesive to the
@BKQOB•LC•QEB•M>KBI
•>MMOLUFJ>QBIV•LKB•ALQ•>ȷBO•BSBOV••JJ•ÅOBPP•
the panel to the ceiling so that it is a slight distance away from the
MOBSFLRP•M>KBI•0IFAB•QEB•M>KBI•PFABT>VP•QL•IBSBI•QEB•>AEBPFSB•>KA•ȳU•
QEB•QLKDRB•FKQL•QEB•DOLLSB•'C•>Q•>II•MLPPF?IB
•QEB•M>KBIP•@>K•?B•ȳUBA•
with staples to provide additional support.
Attention! Always follow the instructions provided by the manufacturer
of the adhesive.

Special decorative paper Fire resistant aluminium layer
Board stabilizing paper
ISOTEX ceiling panels have an aluminium covering
and are therefore flameproof.

CEILING PANELS
WALL PANELS WITH A PAPER FINISH

WALL PANELS WITH A TEXTILE FINISH

TECHNICAL DATA CEILING PANELS WALL PANELS

Quatro* Long ceiling panels Textile finish Paper finish
(Alaska and Nordic)
Density kg/m3 > 230 > 230
Thickness mm > 230 12 ± 1 12 ± 1
Width mm 12 ±1
Length mm
Panels per pack pcs 300 ± 2 600 ± 2 580 ± 2
Amount in pack mm2
Packs per pallet pcs 1800±2 3000±2 3600±2 4250±2 2550±2 2700±2 2550±2 2700±2
Amount on pallet mm2 8 4444 444

4,32 3,6 4,32 5,1 6,12 6,48 5,92 6,26
36 60 60 60 40 40 40 40

155,52 216 259,2 306 244,8 259,2 236,8 250,4

* Panels that have tongue and groove joints in all four edges

Skano Fibreboard OÜ
Rääma 31, 80044 Pärnu, ESTONIA
Phone 445 1800

www.skano.com


Click to View FlipBook Version