Hodge Products Catalog

WARMING

6850 2-Layer Winter Liner - Reg 6862 2-Layer Winter Liner w/ FR
Cotton Shell - Shoulder

•• 2-Layer Cotton/Fleece •• 2-layer FR Cotton/Fleece
•• Shell: 100% cotton twill •• Shell: FR Modacrylic Blend
•• Lining: 100% polyester fleece •• Lining: 100% poly fleece
•• Regular length •• Shoulder length
•• Elastic gather at forehead •• Elastic gather at forehead
•• Hook and loop chin strap •• Warming pack pockets
•• Warming pack pockets at ears
•• Loops on both sides of face at ears
•• Loops on both sides of face
to attach
to attach

6852 2-Layer Winter Liner - Shoulder 6863 3-Layer Winter Liner - Reg

•• 2-Layer Cotton/Fleece •• 3-Layer Polyester/Foam/Fleece WARMING
•• Shell: 100% cotton twill •• Shell: 100% quilted polyester
•• Lining: 100% polyester fleece •• Mid-Layer: Foam
•• Shoulder length •• Lining: 100% polyester fleece
•• Elastic gather at forehead to keep •• Hook & loop attachments for hard

wind out hat security
•• Warming pack pockets at ears •• Warming pack pockets at ears
•• Loops on both sides of face •• Regular length
•• Loops on both sides of face
to attach
to attach

6860 2-Layer Winter Liner w/ FR 6867 3-Layer Winter Liner - Shoulder
Cotton Shell - Reg

•• 2-layer FR Cotton/Fleece •• 3-Layer Polyester/Foam/
•• Shell: 60% Modacrylic/40% Fleece

Cotton Twill •• Shell: 100% quilted polyester
•• Lining: 100% polyester fleece •• Mid-Layer: Foam
•• Regular length •• Lining: 100% polyester fleece
•• Elastic gather at forehead •• Shoulder length
•• Hook and loop chin strap •• Elastic gather at forehead
•• Warming pack pockets at •• Hook & loop attachments for

ears hard hat security
•• Loops on both sides of face to •• Warming pack pockets at

attach ears
•• Loops on both sides of face to

attach

1-800-778-2217 149

WARMING

6870 2-Layer H&L Mouth Piece 6880 2-Layer FR Winter Liner - Reg

•• 2-Layer Mouthpiece-Cotton/Fleece •• 2-layer Modacrylic/cotton twill
•• Shell: 100% cotton twill and Modacrylic/cotton fleece
•• Lining: 100% polyester fleece construction
•• Hook & loop closure
•• Made to fit all N-Ferno® winter liners •• Shell: 60% Modacrylic/40%
cotton twill

•• Lining: 60% Modacrylic/40%
cotton fleece

•• Meets requirements of Performance
Specification ASTM F1506; classified
CAT2 according to NFPA 70E

•• Arc-rated; ATPV rating of 20 cal/cm2
•• Elastic gather at forehead
•• Hook and loop straps for easy hard hat

attachment
•• Hook and loop chin straps
•• Warming pack pockets at ears
•• Loops on both sides of face to attach

6872 2-Layer FR H&L Mouth Piece 6882 2-Layer FR Winter Liner -
Shoulder

WARMING •• 2-Layer mouthpiece – Modacrylic •• 2-layer Modacrylic/Cotton twill
FR twill/Modacrylic FR fleece with modacrylic/cotton fleece
(ATPV rating of 20 cal/cm2) construction

•• Shell: Modacrylic cotton •• Shell: 60% Modacrylic/40% cotton
blend twill twill

•• Lining: Modacrylic cotton •• Lining: 60%Modacrylic/40% cotton
blend fleece fleece

•• Meets requirements of •• Meets requirements of Performance
Performance Specification ASTM Specification ASTM F1506;
F1506; classified CAT2 according classified CAT2 according to NFPA
to NFPA 70E 70E

•• Attach to a winter liner for •• Arc-rated; ATPV rating of 20 cal/
face coverage cm2

•• Hook & loop closure •• Elastic gather at forehead
•• Hook and loop straps for easy hard

hat attachment
•• Warming pack pockets at

the ears
•• Loops on both sides of face

to attach

6877 3-Layer Winter Liner w/ FR 6885 Two-layer FR Winter Liner
Cotton Shell - Shoulder

•• 3-Layer FR Modacrylic Cotton/Foam/ •• Upper section: Modacrylic
Fleece construction cotton blend twill with
Modacrylic cotton fleece lining
•• Shell: 60% Modacrylic/40% Cotton (ATPV rating of 20 cal/cm2)
Twill
•• Lower section: Double layer
•• Mid-Layer: Foam modacrylic blend rib knit (EBT
•• Lining: 100% polyester fleece rating of 17.0 cal/cm2)
•• Shoulder length
•• Elastic gather at forehead •• Meets requirements of
•• Hook & loop straps for hard hat Performance Specification
ASTM F1506; classified CAT2
attachment according to NFPA 70E
•• Warming pack pockets at ears
•• Loops on both sides of face to attach •• Nomex® Metal Zipper
•• Hook and loop straps for easy

hard hat attachment
•• Warming pack pockets

150 HPIONLINE.COM®

WARMING

6892 3-Layer FR Winter 6840 2-Layer Econo Winter Liner - Reg
Liner - Shoulder

•• 3-Layer Modacrylic twill /FR •• 2-Layer Poly/Fleece
Thinsulate/Modacrylic fleece (ATPV •• Shell: 100% polyester with
rating of 27 cal/cm2)
PU coating
•• Shell: Modacrylic cotton blend twill •• Lining: 100% polyester
•• Mid-Layer: 3M™ FR Thinsulate™
•• Lining: Modacrylic cotton fleece
•• Hook & loop chin strap
blend fleece •• Regular length
•• Meets Performance Requirements of

ASTM F1506 and NFPA 70E (CAT 3)
•• Elastic gather at forehead
•• Warming pack pockets
•• Hook and loop straps for

easy attachment

6950 3-Layer Winter Liner - Reg 6842 2-Layer Econo Winter
Liner - Shoulder

•• 3-Layer Nylon/Foam/Sherpa •• 2-Layer Poly/Fleece WARMING
•• Shell: 100% quilted nylon •• Shell: 100% polyester with PU
•• Mid-Layer: Foam
•• Lining: 100% Poly Sherpa coating
•• Regular length •• Lining: 100% polyester fleece
•• Elastic gather at forehead •• Hook & loop chin strap
•• Warming pack pockets •• Shoulder length
•• Hi-Vis lime option available with

reflective piping and warming
pack pockets

6952 3-Layer Winter Liner - Shoulder 6850 2-Layer Winter Liner - Reg

•• 3-Layer Nylon/Foam/Sherpa •• 2-Layer Cotton/Fleece
•• Shell: 100% quilted nylon •• Shell: 100% cotton twill
•• Mid-Layer: Foam •• Lining: 100% polyester fleece
•• Lining: 100% Poly Sherpa •• Regular length
•• Shoulder length •• Elastic gather at forehead
•• Elastic gather at forehead •• Hook and loop chin strap
•• Warming pack pockets •• Warming pack pockets

at ears
•• Loops on both sides of face

to attach

1-800-778-2217 151

WARMING

6852 2-Layer Winter Liner - Shoulder 6863 3-Layer Winter Liner - Reg

•• 2-Layer Cotton/Fleece •• 3-Layer Polyester/Foam/Fleece
•• Shell: 100% cotton twill •• Shell: 100% quilted polyester
•• Lining: 100% polyester fleece •• Mid-Layer: Foam
•• Shoulder length •• Lining: 100% polyester fleece
•• Elastic gather at forehead to keep •• Hook & loop attachments for hard

wind out hat security
•• Warming pack pockets at ears •• Warming pack pockets at ears
•• Loops on both sides of face •• Regular length
•• Loops on both sides of face
to attach
to attach

6860 2-Layer Winter Liner w/ FR Cotton 6867 3-Layer Winter Liner - Shoulder
Shell - Reg

WARMING •• 2-layer FR Cotton/Fleece •• 3-Layer Polyester/Foam/Fleece
•• Shell: 60% Modacrylic/40% Cotton •• Shell: 100% quilted polyester
•• Mid-Layer: Foam
Twill •• Lining: 100% polyester fleece
•• Lining: 100% polyester fleece •• Shoulder length
•• Regular length •• Elastic gather at forehead
•• Elastic gather at forehead •• Hook & loop attachments for hard
•• Hook and loop chin strap
•• Warming pack pockets at ears hat security
•• Loops on both sides of face to •• Warming pack pockets at ears
•• Loops on both sides of face to
attach
attach

6862 2-Layer Winter Liner w/ FR Cotton 6870 2-Layer H&L Mouth Piece
Shell - Shoulder

•• 2-layer FR Cotton/Fleece •• 2-Layer Mouthpiece-Cotton/
•• Shell: FR Modacrylic Blend Fleece
•• Lining: 100% poly fleece
•• Shoulder length •• Shell: 100% cotton twill
•• Elastic gather at forehead •• Lining: 100% polyester fleece
•• Warming pack pockets at ears •• Hook & loop closure
•• Loops on both sides of face to attach •• Made to fit all N-Ferno® winter

liners

152 HPIONLINE.COM®

WARMING

6872 2-Layer FR H&L Mouth Piece 6882 2-Layer FR Winter
Liner - Shoulder

•• 2-Layer mouthpiece – •• 2-layer Modacrylic/Cotton
Modacrylic FR twill/Modacrylic twill with modacrylic/cotton
FR fleece (ATPV rating of 20 fleece construction
cal/cm2)
•• Shell: 60% Modacrylic/40%
•• Shell: Modacrylic cotton cotton twill
blend twill
•• Lining: 60%Modacrylic/40%
•• Lining: Modacrylic cotton cotton fleece
blend fleece
•• Meets requirements of
•• Meets requirements of Performance Specification
Performance Specification ASTM F1506; classified CAT2
ASTM F1506; classified CAT2 according to NFPA 70E
according to NFPA 70E
•• Arc-rated; ATPV rating of 20
•• Attach to a winter liner for cal/cm2
face coverage
•• Elastic gather at forehead
•• Hook & loop closure •• Hook and loop straps for easy

hard hat attachment
•• Warming pack pockets at the

ears
•• Loops on both sides of face

to attach

6877 3-Layer Winter Liner w/ FR 6885 Two-layer FR Winter Liner
Cotton Shell - Shoulder

•• 3-Layer FR Modacrylic Cotton/ •• Upper section: Modacrylic cotton WARMING
Foam/Fleece construction blend twill with Modacrylic
cotton fleece lining (ATPV rating
•• Shell: 60% Modacrylic/40% of 20 cal/cm2)
Cotton Twill
•• Lower section: Double layer
•• Mid-Layer: Foam modacrylic blend rib knit (EBT
•• Lining: 100% polyester fleece rating of 17.0 cal/cm2)
•• Shoulder length
•• Elastic gather at forehead •• Meets requirements of
•• Hook & loop straps for hard Performance Specification ASTM
F1506; classified CAT2 according
hat attachment to NFPA 70E
•• Warming pack pockets at ears
•• Loops on both sides of face •• Nomex® Metal Zipper
•• Hook and loop straps for easy
to attach
hard hat attachment
•• Warming pack pockets

6880 2-Layer FR Winter Liner - Reg 6892 3-Layer FR Winter
Liner - Shoulder

•• 2-layer Modacrylic/cotton •• 3-Layer Modacrylic twill /FR
twill and Modacrylic/cotton Thinsulate/Modacrylic fleece
fleece construction (ATPV rating of 27 cal/cm2)

•• Shell: 60% Modacrylic/40% •• Shell: Modacrylic cotton blend
cotton twill twill

•• Lining: 60% Modacrylic/40% •• Mid-Layer: 3M™ FR
cotton fleece Thinsulate™

•• Meets requirements of •• Lining: Modacrylic cotton blend
Performance Specification fleece
ASTM F1506; classified CAT2
according to NFPA 70E •• Meets Performance
Requirements of ASTM F1506
•• Arc-rated; ATPV rating of 20 and NFPA 70E (CAT 3)
cal/cm2
•• Elastic gather at forehead
•• Elastic gather at forehead •• Warming pack pockets
•• Hook and loop straps for easy •• Hook and loop straps for easy

hard hat attachment attachment
•• Hook and loop chin straps
•• Warming pack pockets 1-800-778-2217

at ears
•• Loops on both sides of face

to attach

153

WARMING

6950 3-Layer Winter Liner - Reg 6821 Fleece Balaclava

•• 3-Layer Nylon/Foam/Sherpa •• Polyester Fleece for warmth in
•• Shell: 100% quilted nylon extreme conditions
•• Mid-Layer: Foam
•• Lining: 100% Poly Sherpa •• Reflective accent for higher visibility
•• Regular length •• Long length
•• Elastic gather at forehead •• Hi-vis lime option available with
•• Warming pack pockets
reflective piping and in new
longer length

6952 3-Layer Winter Liner - Shoulder 6822 Balaclava with Spandex Top

WARMING •• 3-Layer Nylon/Foam/Sherpa •• Polyester Fleece for warmth in
•• Shell: 100% quilted nylon extreme conditions
•• Mid-Layer: Foam
•• Lining: 100% Poly Sherpa •• Lightweight, strechable spandex top
•• Shoulder length •• Long length
•• Elastic gather at forehead •• Reflective accent for higher visibility
•• Warming pack pockets

6832 Spandex Balaclava 6823 Wind-proof Hinged Balaclava

•• Polyester/Spandex blend dries fast •• Fleece with wind-protectant
•• Lightweight and stretchable for all day fabric at most vulnerable places
protects against a variety
comfort and allows greater mobility in of elements
any direction
•• Easily fits under hard hat or other head •• Unique hinged design
protection •• 3-panel construction with flat
•• Long length extending below the
neckline for added protection from the lock stitching for a comfortable
elements and extra coverage “made just for you” fit
•• Reflective accent for higher visibility •• Reflective accents help keep
workers safe and seen
•• Long length
•• RT: Realtree Xtra(R) pattern and
longer length

154 HPIONLINE.COM®

WARMING:

6824 Wool Blend Balaclava 6827 2-pc Fleece/Neoprene Balaclava

•• Polyester/Wool blend for the •• 2-pc Polyester Fleece with
ultimate in warmth and moisture neoprene face mask attached by
wicking hook and loops

•• Easily fits underneath a hard hat •• 1mm neoprene with one side
•• Long length, lightweight nylon and one side fleece for
additional comfort
& stretchable
•• Reflective accents help keep •• Long length
•• Reflective accents help keep
workers safe and seen
workers safe and seen
•• Unique Hook and Loop

suspensions to attach cap to a
hard hat for better stability

6825 Nomex Balaclava 6828 Modacrylic Blend FR
Fleece Balaclava

•• Nomex® Fleece •• Modacrylic Blend Fleece WARMING
•• Meets requirements of •• Meets requirements of Performance

Performance Specification ASTM Specification ASTM F1506; classified
F1506; classified CAT2 according CAT2 according to NFPA 70E
to NFPA 70E •• Arc-rated; ATPV of 10.6 cal/cm2
•• Arc Rated, ATPV of 9.7 cal/cm2 •• Meets the performance
•• Reflective accent for higher reqquirements of EN1149, anti-
visibility static
•• Stretchable and comfortable •• Reflective accent for higher
visibility
•• Stretchable and comfortable

6826 2-pc Fleece Balaclava 6970 Extreme Balaclava w/Hot Rox

•• 2-pc Polyester Fleece attached •• 2-piece, 320g fleece design
by hook and loops envelopes the face, neck and
head
•• Unique Hook and Loop
suspensions to attach cap to a •• Built-in heat exchanger
hard hat for better stability provides warm air for inhalation
in extreme conditions
•• Long length
•• Reflective accents help keep •• Form-fitting design prevents
eyewear from fogging
workers safe and seen
•• Adjustable mask with hook and
loop attachments

•• Removable face mask
•• Patented design

1-800-778-2217 155

WARMING

6802 Classic Trapper Hat 6820 FR Knit Cap

•• Trimmed with faux fur and a •• Shell: Modacrylic Cotton
thick, quilted satin crown lining, Blend
these hats are a snug barrier
against wind and cold •• Lining: Modacrylic Cotton
Blend Fleece
•• Durable, wind and water-resistant
nylon shell to keep you warm •• Reflective accent for higher
and dry visibility

•• 60 grams of Thinsulate™ •• Meets Performance
Insulation from 3M Requirements of ASTM F1506
and NFPA 70E (CAT 4)
•• Quilted satin crown lining with
PU backing •• Arc Rated; ATPV rating of 49.5
cal/cm2
•• YKK® buckle with strap
•• Button flaps with side holes for

hearing
•• Hi-Vis Lime color option that

includes reflective piping for
added visibility

6816 Reversible Knit Cap 6810 Stretch Cap - Half Style

WARMING •• Reversible knit hat •• 100% polyester knit
•• Stretchable gray polyester on •• Half cap style

one side
•• Soft lime fleece on reverse side
•• One size

6819BT Knit Cap 6815 Stretch Cap - Full Face

•• 100% acrylic shell •• 100% polyester knit
•• CoolMax™ Lining •• Full face style
•• 100% tenacious look

156 HPIONLINE.COM®

WARMING

6818 Knit Cap 6995 Full Foot Warming Packs

•• 100% Dralon acrylic shell •• To activate, just open the pack
•• 3M™ Thinsulate™ flex insulation •• All natural ingredients heat up

40g when they contact oxygen
•• Soft fleece liner •• Seal from oxygen in Zip-Loc bag
•• One size
and reuse the next day
•• Foot style warms up to 7 hours

6990 Hand Warming Packs 925WP Performance Dorsal Impact
Reducing + Thermal WP Gloves

•• To activate, just open the •• Dual-zone 3M™ Thinsulate™ WARMING
pack Insulation

•• All natural ingredients •• Waterproof/windproof breathable
heat up when they contact membrane insert
oxygen
•• Full TPR armor + technical foam for
•• Seal from oxygen in max protection
Zip-Loc bag and reuse the
next day •• Dual-layer AX Suede™-reinforced
gripping palm
•• Hand style warms up to 12
hours •• Armortex®-reinforced thumb saddle
and index finger

•• Padded neoprene cuff with reflective
binding

•• Pull-on tab with ID space to write
wearer’s name

•• EN 388: 3323 X P

6992 Toe Warming Packs 814 Thermal Utility Gloves

•• To activate, just open the pack •• Insulated fill for cool to cold
•• All natural ingredients heat up temps

when they contact oxygen •• Weather-resistant outer shell
•• Seal from oxygen in Zip-Loc bag •• Durable synthetic leather

and reuse the next day palm
•• Toe style warms up to 5 hours •• Touch screen-capable thumb

and index finger
•• QuickCuff™ neoprene/elastic

gauntlet fit with ID space
•• Soft thumb nose/brow wipe

area
•• EN 388: 2222 X

1-800-778-2217 157

WARMING

814CR6 Thermal Utility + Cut 818WP Performance Thermal
Resistance Gloves Waterproof Utility Gloves

•• Next-gen Armortex®-backed palm •• Dual-zone 3M™ Thinsulate™
for extreme cut protection Insulation

•• Insulated fill for cool to cold •• Waterproof/windproof breathable
temps membrane insert

•• Weather-resistant outer shell •• Weather-resistant ripstop outer
•• Contrasting color gray fingertips for shell + DWR finish

hand signaling •• Tough Tena-Grip™ palm and
•• Durable synthetic leather palm fingertips
•• Reinforced thumb saddle wear area
•• Touch screen capable thumb and
enhances grip and extends glove index finger
life
•• Low-profile molded hook and loop •• Extended neoprene cuff with hook
closure with ID space provides & loop closure and ID space
a secure fit and keeps out the
elements •• Neoprene knuckle pad
•• Pull-on tab for easy on/off •• Soft thumb nose/brow wipe area
•• Soft thumb nose/brow wipe area •• Reflective accents
•• External size label allows for quick •• Available in black or hi-vis
swap-out at the tool crib
•• EN 388: 2543 F; ANSI/ASTM Cut orange
Level A6 •• EN 388: 3322 X

817 Reinforced Thermal Utility Gloves 819WP Extreme Thermal
Waterproof Gloves

WARMING •• Dual-zone 3M™ Thinsulate™ •• Dual-zone 3M™ Thinsulate™
Insulation Insulation

•• Weather-resistant ripstop outer •• Waterproof/windproof breathable
shell + DWR finish membrane insert

•• Rugged AX Suede™ palm and •• Weather-resistant ripstop outer
fingertip reinforcements shell + DWR finish

•• Touch screen-capable thumb and •• Rugged AX Suede™ palm and
index finger fingertip reinforcements

•• Extended neoprene cuff with hook •• Touch screen capable thumb and
& loop closure and ID space index finger

•• Neoprene knuckle pad •• Gauntlet cuff with internal elastic
•• Soft thumb nose/brow wipe cinch cord

area •• Cuff accommodates N-Ferno™
•• Reflective accents 6990 Hand Warming Packs for
•• EN 388: 3423 X added warmth

•• Neoprene knuckle pad
•• Soft thumb nose/brow wipe

area
•• Reflective accents
•• EN 388: 3423 X

817WP Reinforced Thermal Waterproof 819OD Extreme Thermal Waterproof
Utility Gloves Gloves with OutDry®

•• Dual-zone 3M™ Thinsulate™ •• Dual-zone 3M™ Thinsulate™
Insulation Insulation

•• Waterproof/windproof •• OutDry® waterproof/windproof
breathable membrane insert bonded membrane

•• Weather-resistant ripstop outer •• Weather-resistant ripstop outer
shell + DWR finish shell + DWR finish

•• Rugged AX Suede™ palm and •• Rugged AX Suede™ palm and
fingertip reinforcements fingertip reinforcements

•• Touch screen-capable thumb and •• Touch screen capable thumb
index finger and index finger

•• Extended neoprene cuff with •• Gauntlet cuff with internal
hook & loop closure and ID elastic cinch cord
space
•• Cuff accommodates N-Ferno™
•• Neoprene knuckle pad 6990 Hand Warming Packs for
•• Soft thumb nose/brow wipe added warmth

area •• Neoprene knuckle pad
•• Reflective accents •• Soft thumb nose/brow wipe
•• EN 388: 3423 X
area
•• Reflective accents
•• EN 388: 3423 X

158 HPIONLINE.COM®

WARMING

816 Thermal Flip-Top Gloves 8388 Type R Class 3/2 Thermal
Jacket Kit
•• Fleece-lined mittens convert to half-
finger gloves •• Weatherproof 300D oxford
polyester outer shell
•• Mitten pocket and thumb stow
easily when not in use •• Breathable PU coating
•• Inner jacket with 100g 3M™
•• Weather-resistant outer shell
•• Durable synthetic leather palm Thinsulate™ lining
•• Contoured gathered elastic cuff with •• Inner jacket zips out and sleeves zip

ID space off to create Class 2 thermal vest
•• Soft thumb nose/brow wipe area •• 2” ANSI-compliant 3M™
•• Reflective accents
•• EN 388: 2231 X Scotchlite™ Reflective
•• Black panels hide dirt and wear
•• Inset hood with drawstring and

stoppers
•• Two external front pockets with

snap flaps
•• External zipper chest pocket
•• Cellphone chest pocket
•• Clear ID badge holder
•• Dual mic tabs for clipping radios
•• •YKK #5 zippers

8384 Type R Class 3 Thermal Parka 8925 Class E Thermal Pants

•• Weatherproof 300D oxford •• Weatherproof 100% polyester WARMING
polyester outer shell outer shell

•• PU coating •• Breathable PU coating
•• 160g quilted thermal insulation + •• 80g 3M™ Thinsulate™ lining
•• 2” ANSI-compliant 3M™
fleece lining
•• 2” ANSI-compliant reflective Scotchlite™ Reflective
•• Elastic waistband with
material
•• Black panels hide dirt drawstring
•• Zippered leg openings for easy
and wear
•• Inset hood with drawstring on/off
•• Pockets: One right leg cargo
and stoppers
•• Internal waist cord cinches tight pocket

to keep out cold and wind
•• Two external front pockets with

snap flaps
•• Cell phone chest pocket
•• Dual slot pen pocket on arm
•• Dual mic tabs for clipping

radios
•• Storm flap snap front covers

rugged #8 front zipper

1-800-778-2217 159

160

WELDING

HELMETS 162
SHIELDS 164
EYEWEAR 165

161

WELDING: AUTO-DARKENING HELMETS

WHAM3030AE American Eagle Decorated Auto Darkening Helmet

•• 4/ 5-8/ 9-13 DsteEpleSssCvaRriaIbPleTshIaOdeN •• Superior comDfoErtSwiCthRpivIoPt sTtyIleOheNadgear

•• 3.858” x 3.425” (98 x 87 mm) view area •• Made of high-impact resistant nylon
•• Manual internal controls •• Four independent arc sensors in a staggered design
•• Four independent sensors in staggered design
•• Solar cells and replaceable lithium-battery to deliver the most reliable arc detection
•• Grinding and welding modes •• High speed lens – 1/30,000 second
•• 1/30,000 second switch speed •• Powered by solar cells and replaceable lithium-
•• 5 amps and below TIG rating
•• High-impact resistant nylon battery
•• Up to shade DIN16 at all times •• Includes magnification lens holder
•• Fully adjustable nylon suspension

WELDING: AUTO-DARKENING HELMETS WHAM3030FL Flame Decorated Auto Darkening Helmet

•• 4/ 5-8/ 9-13 DsteEpleSssCvaRriaIbPleTshIaOdeN •• Superior comfort with pivot style headgear
•• Made of high-impact resistant nylon
•• 3.858” x 3.425” (98 x 87 mm) view area •• Four independent arc sensors in a staggered design
•• Manual internal controls
•• Four independent sensors in staggered design to deliver the most reliable arc detection
•• Solar cells and replaceable lithium-battery •• High speed lens – 1/30,000 second
•• Grinding and welding modes •• Powered by solar cells and replaceable lithium-
•• 1/30,000 second switch speed
•• 5 amps and below TIG rating battery
•• High-impact resistant nylon •• Includes magnification lens holder
•• Up to shade DIN16 at all times •• Fully adjustable nylon suspension

WHAM3030FM Fire Metal Decorated Auto Darkening Helmet

•• 4/ 5-8/ 9-13 DsteEpleSssCvaRriaIbPleTshIaOdeN •• Superior comfort with pivot style headgear
•• Made of high-impact resistant nylon
•• 3.858” x 3.425” (98 x 87 mm) view area •• Four independent arc sensors in a staggered design
•• Manual internal controls
•• Four independent sensors in staggered design to deliver the most reliable arc detection
•• Solar cells and replaceable lithium-battery •• High speed lens – 1/30,000 second
•• Grinding and welding modes •• Powered by solar cells and replaceable lithium-
•• 1/30,000 second switch speed
•• 5 amps and below TIG rating battery
•• High-impact resistant nylon •• Includes magnification lens holder
•• Up to shade DIN16 at all times •• Fully adjustable nylon suspension

WHAM3030GB Glossy Black Decorated Auto Darkening Helmet

•• 4/ 5-8/ 9-13 stepless variable shade •• Superior comfort with pivot style headgear
•• 3.858” x 3.425” (98 x 87 mm) view area •• Made of high-impact resistant nylon
•• Manual internal controls •• Four independent arc sensors in a staggered design
•• Four independent sensors in staggered design
•• Solar cells and replaceable lithium-battery to deliver the most reliable arc detection
•• Grinding and welding modes •• High speed lens – 1/30,000 second
•• 1/30,000 second switch speed •• Powered by solar cells and replaceable lithium-
•• 5 amps and below TIG rating
•• High-impact resistant nylon battery
•• Up to shade DIN16 at all times •• Includes magnification lens holder
•• Fully adjustable nylon suspension

162 HPIONLINE.COM®

WELDING: AUTO-DARKENING HELMETS

WHAD6030GB Glossy Black Auto Darkening Helmet with Digital Controls

•• 4 / 5-13 digital display •• Superior comfort with pivot style headgear
•• 3.937” x 2.362” (100 x 60mm) view area •• Made of high-impact resistant nylon
•• Digital internal controls •• Four independent arc sensors in a staggered design
•• Four independent sensors in staggered design
•• Solar cells and replaceable lithium-battery to deliver the most reliable arc detection
•• Grinding and welding modes •• High speed lens – 1/30,000 second
•• 1/30,000 second switch speed •• Powered by solar cells and replaceable lithium-
•• 5 amps and below TIG rating
•• High-impact resistant nylon battery
•• Up to shade DIN16 at all times •• Includes magnification lens holder
•• Fully adjustable nylon suspension

WHAD6030MB Metallic Blue Auto Darkening Helmet with Digital Controls WELDING: AUTO-DARKENING HELMETS

•• 4 / 5-13 digital display •• Superior comfort with pivot style headgear
•• 3.937” x 2.362” (100 x 60mm) view area •• Made of high-impact resistant nylon
•• Digital internal controls •• Four independent arc sensors in a staggered design
•• Four independent sensors in staggered design
•• Solar cells and replaceable lithium-battery to deliver the most reliable arc detection
•• Grinding and welding modes •• High speed lens – 1/30,000 second
•• 1/30,000 second switch speed •• Powered by solar cells and replaceable lithium-
•• 5 amps and below TIG rating
•• High-impact resistant nylon battery
•• Up to shade DIN16 at all times •• Includes magnification lens holder
•• Fully adjustable nylon suspension

WHAM1020MB Matte Black Auto Darkening Helmet

•• 4 / 9-13 stepless variable shade •• Superior comfort with pivot style headgear
•• 3.937” x 1.77” (100 x 45 mm) view area •• Made of high-impact resistant nylon
•• Manual external/ internal controls •• Four independent arc sensors in a staggered design
•• Four independent sensors in staggered design
•• Solar cells and replaceable lithium-battery to deliver the most reliable arc detection
•• Grinding and welding modes •• High speed lens – 1/30,000 second
•• 1/30,000 second switch speed •• Powered by solar cells and replaceable lithium-
•• 5 amps and below TIG rating
•• High-impact resistant nylon battery
•• Up to shade DIN16 at all times •• Includes magnification lens holder
•• Fully adjustable nylon suspension

1-800-778-2217 163

WELDING: PASSIVE HELMETS AND IR FACE SHIELDS

WHP100 Passive Helmet with IR 10 Plate

•• LightweightDtheErmSoCplaRstiIcPshTellIpOroNvides total head, face and neck protection

•• Fully adjustable nylon suspension
•• Lift front with viewing area of 2” x 4 ¼” (50.8 x 107.95 mm)
•• Fitted with IR shade #10 welding filter
•• Optimally balanced “shake down” helmet minimizes carbon monoxide build up
•• Ample space for respirators

WELDING: PASSIVE HELMETS AND IR FACE SHIELDS S1150 Tapered IR5 Polycarbonate Face Shield

•• Meets ANSIDDZ8EE7+SSCCRRIIPPTTIIOONN

•• 8” x 15.5” | .078” thick
•• Provides 99% UVA/B/C protection
•• Universal slots will accommodate a wide variety of headgear
•• Shown with HGBR - sold separately
•• Weight: 5.6 oz

S1250 Cylinder IR5 Polycarbonate Face Shield

•• Meets ANSI Z87+
•• 8” x 15.5” | .078” thick
•• Provides 99% UVA/B/C protection
•• Universal slots will accommodate a wide variety of headgear
•• Shown with HGBR - sold separately
•• Weight: 6 oz

164 HPIONLINE.COM®

WELDING: IR EYEWEAR

GG504TSHIELDIR3 Capstone Green Tinted Face Shield with IR3 H2X Anti-Fog Lens Goggle

•• Fully adjustable elastic band.
•• Fits over prescription glasses.
•• Lens is coated to prevent fogging.
•• Soft vinyl goggle body conforms to facial contours.
•• Goggle provides protection against dust and chemical splash.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Removable vent caps allow the user to remove when more ventilation is required or leave

in place for unsurpassed chemical splash resistance.
•• Goggle incorporated with removable shield provides full face protection.
•• 4 ventilation holes provide appropriate airflow.
•• Ratchet shield allows user to open or close in 3 positions for adjustment.
•• Polycarbonate shield conforms to the face offering increased impact and dust protection.
•• Also available with a 5.0 IR Filter

GB1860SFT 3.0 IR H2X Filter Anti-Fog Lens with Black Strap/Temples

•• Lens and frame vented to increase air flow. WELDING: IR EYEWEAR
•• Headband and temples feature ratchet adjustment for perfect fit, features quick fit retainer.
•• Interchangeable temples and headband included with each pair of V2G.
•• Flame resistant foam padding.
•• 9.75 base curved lens provides full side protection.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Passes MIL-PRF 32432 High Velocity Impact Standards.
•• Also Available with a 5.0 IR Filter

SB1860SF 3.0 IR Filter Lens with Black Frame

•• TNeomseplbeusdasdDsjuescEtutroSe ftCohuerRgdlaiIfsPfesrTaennIdtOlpernNegvtehnst. slipping.
••

•• 9.75 base curved lens provides full side protection without distracting seams or traditional

type side shields.

•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.

•• Passes MIL-PRF 32432 High Velocity Impact Standards.

•• Also available with a 5.0 IR Filter

SB5750SFT 5.0 IR Filter H2X Anti-Fog Lens with Black Frame

•• Ventilated nose piece is soft and adjustable.
•• Top of frame is ventilated allowing air to circulate.
•• Soft dual-injected rubber temple tips combined with fully adjustable straight back

temples reinforce the highest level of comfort and fit.
•• 9.5 base curve lens provides excellent side protection.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Passes MIL-PRF 32432 High Velocity Impact Standards.
•• Also available with a 3.0 IR Filter

1-800-778-2217 165

WELDING: IR EYEWEAR

S3560SFJ 3.0 IR Filter Lens with Black Temples

•• Designed to better fit today’s prescription eye wear.
•• Lightweight nylon temples adjust for length and pitch.
•• Single lens encapsulates the eye for superb protection.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Fits over frames up to 5 3/8” W x 1 3/4” H | 137mm x 44mm
•• Also available with a 5.0 IR Filter

SB7950SF 5.0 IR Lens with Black Frame

WELDING: IR EYEWEAR •• Stylish dual lens with full eye protection, plano lens, prescription lens, and full reader lens
adaptable.

•• Soft nose piece provides comfort for extended use.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Available with a full reader +1.5 or +2.0 lens or as a prescription* lens.
•• Also available with a 3.0 IR Filter

SB460SF 3.0 IR Filter Lens with Black Frame

•• SScinrgatlechlernessDiastnaEdntaSdpjoCulsytRcaabrIlbePotneTamtIepOlleesnNsenpsrouvreidreeslia9b9%le performance.
•• UVA/B/C protection.

•• Also available with a 5.0 IR Filter

S2514R20 1.5 IR Filter +2.0 Lens with Black Temples

•• Lens insert is out of user’s direct line of vision.
•• Integrated nose piece.
•• Soft, non-slip rubber temple tips provide non-binding fit.
•• Economical wrap-around single lens provides full panoramic view.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Also available with a 1.5 IR filter, 1.5 IR filter + 1.5 mag, 5.0 IR filter, 3.0 IR filter,

and ARC filter

166 HPIONLINE.COM®

WELDING: IR EYEWEAR

SB4950STP Clear Anti-Fog Lens / 5.0 IR Filter Flip Lens with Black Frame

•• Adjustable nosepiece provides 3 different angles.
•• 3-angle adjustable flip lens.
•• Unique outer flip lens system provides users with multiple options.
•• Flip the outer lens down for applications where tinted or IR lenses are needed.
•• Scratch resistant polycarbonate lens provides 99% UVA/B/C protection.
•• Also available with a 3.0 IR Filter

WELDING: IR EYEWEAR

1-800-778-2217 167

168

TOOLS

CUTTERS 170

DRILLS 172

GRINDERS 177

HAMMERS 188

IMPACT DRIVERS / MULTI-TOOLS 195

ROUTERS 199

SANDERS / SAWS 203

SCRAPERS / SCREWDRIVERS 209

SHEARS / TRIMMERS 212

WRENCHES 214

ACCESSORIES 216

169

TOOLS: BLADE SHARPENERS, CUT-OUT TOOLS, CUTTERS

TOOLS: BLADE SHARPENERS, CUT-OUT TOOLS, CUTTERS 98202 Blade Sharpener

•• Wheel Size : 7-7/8” •• Ideal for sharpening woodworking planer blades,
•• No Load Speed : 560 RPM bevel and lathe chisels, and jointer knives
•• AMPS : 1.1
•• Overall Length : 15-3/8” •• Quiet motor delivers 560 RPM for a fine finish
•• Net Weight : 24.3 lbs. •• Large 7-7/8” aluminum-oxide wheel for efficient
•• Max. no load speed : 560 RPM
•• Maximum blade length compatibility : 15-3/4” sharpening
•• Water feed : Yes •• Sharpens blades up to 15-3/4” long
•• Shipping Weight : 26.9 lbs. •• Water feed for cooling blades
•• UPC Code : 088381-001113 •• Less weight for easy transporting
•• 3 different grinding wheels are available (60 grit

coarse, 1,000 grit medium, 6,000 grit fine) for
increased versatility
•• Durable construction for long tool life
•• Includes 1,000 grit medium grinding wheel, wrench,
and rule assembly
•• 1 Year Limited Warranty

3706/3706K Drywall Cut‑Out Tool Kit, with Circular Guide, Vacuum Dust Collection Cover, Case

•• Collet Capacity : 1/8”, 1/4” •• Powerful 5.0 AMP motor for cutting into various
•• No Load Speed : 32,000 RPM materials
•• AMPS : 5
•• Overall Length : 9-7/8” •• 32,000 RPM for faster cutting
•• Net Weight : 2.4 lbs. •• 2-way “Slide and Bump” on/off switch
•• Tool-less depth adjustment : Yes •• Sealed switch for extra protection from dust and
•• Power Type : Corded
•• Shipping Weight : 5.6 lbs. debris and longer tool life
•• UPC Code : 088381-041621 •• “Tool-less” depth adjustment sets the desired cutting

depth quickly and easily
•• Lightweight at only 2.4 lbs. for easy handling
•• Slim body design (2-1/4” diameter) for comfort and

control
•• All-ball bearing construction for longer tool life
•• Large and conveniently located shaft lock button for

fast bit changes
•• Technologically advanced centrifugal fan for efficient

cooling of the motor

CA5000X 4‑5/8” Aluminum Groove Cutter

•• Blade Diameter : 4-5/8” •• 12 AMP motor for optimum performance in aluminum composite
•• Arbor : 13/16” materials
•• Max. Cutting Depth : 7/16”
•• No Load Speed (variable speed) : 2,200 - 6,400 •• Variable speed control dial (2,200 - 6,400 RPM) enables user to
match the speed to the application
RPM
•• AMPS : 12 •• Built-in depth adjustment dial allows multiple cutting stops at 3
•• Overall Length : 13-5/8” mm, 4 mm and 6 mm
•• Net Weight : 11.3 lbs.
•• Shipping Weight : 14.75 lbs. •• Close to the edge cutting (11/16”) for increased accuracy
•• UPC Code : 088381-699815 •• Built-in dust port swivels for increased maneuverability when

connected to vacuum hose; connects to a vacuum with optional 24
mm Hose Cuff (part no. P-70487)
•• Electronic controller provides constant speed control which
automatically applies additional power to the motor to maintain
speed under load
•• Electronic Controller provides an electronic current limiter
which helps protect the motor from overload in high torque
applications
•• Electronic Controller provides soft start which is designed to
suppress start-up reaction for smooth start-ups and longer gear
life
•• Mechanical brake for increased productivity
•• Smooth and convenient plunge release lever for operator
comfort

XCS02T1 18V LXT® Lithium‑Ion Brushless Cordless Steel Rod Flush‑Cutter Kit (5.0Ah)

•• Blade Diameter : 4-5/16” •• BL™ Brushless Motor delivers 2,200 RPM for faster spark free
•• Cutting Capacity (thickness) : 1” cutting
•• No Load Speed : 2,200 RPM
•• Lock On Switch : Yes •• Automatic Speed Change™ technology adjusts cutting speed and
•• Lock-Off : No torque during cut for optimum performance
•• Switch Type : Slide
•• Battery : 18V LXT® Lithium-Ion •• Spark free cold cutting of rebar, threaded-rod and other metal
•• Overall Length : 18-17/32” objects with a carbide-tipped cutting blade
•• Net Weight (with battery) : 8.8 lbs.
•• Power Type : Cordless •• Efficient BL™ Brushless motor is electronically controlled to
•• Shipping Weight : 23.45 lbs. optimize battery energy use for up to 50% longer run time per
•• UPC Code : 088381-847124 charge

170 •• The electronically-controlled BL™ Brushless Motor efficiently uses
energy to match torque and RPM to the changing demands of the
application

•• The BL™ Brushless Motor eliminates carbon brushes, enabling
the BL™ Motor to run cooler and more efficiently for longer life

•• Chip collecting bag captures metal cut-offs (optional accessory)
•• Stopper holds the rebar at 90° to the cutting blade for faster and

more precise cuts
•• Spiral bevel gears for smoother rotations and a more efficient

transfer of energy
•• Three position adjustable side handle for operator comfort and

convenience

HPIONLINE®.COM

TOOLS: CUTTERS

XCS01T1 18V LXT® Lithium‑Ion Cordless Rebar Cutter Kit (5.0Ah)

•• Blade Configuration : Double sided •• Cutting capacity range of 1/8”- 3/4”; cuts up to 60 grade #6 rebar
•• Cutting Capacity (thickness) : 3/4” •• 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8”) rebar before
•• Battery : 18V LXT® Lithium-Ion
•• Overall Length : 16-1/5” needing to be replaced
•• Net Weight (with battery) : 24.3 lbs. •• Cutting head rotates 360° for different cutting positions
•• Power Type : Cordless •• Adjustable stopper holds the rebar at 90° to the cutting blade and assists in
•• Shipping Weight : 39 lbs.
•• UPC Code : 088381-835541 smooth cutting
•• Ergonomic pistol grip handle with rubberized soft grip provides increased

comfort on the job
•• Effortless cutting of #6 (3/4”) rebar in 6.5 seconds
•• Spark free cutting of rebar and steel rod
•• Weighs only 24.3 lbs. with battery for reduced operator fatigue
•• 18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D.

battery charge level indicator
•• 18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45

minutes or less

EK8100 16” 81 cc Power Cutter TOOLS: CUTTERS

•• Engine Displacement (cu.in./cc) : 4.61 cu.in. (75.6 cc) •• Improved decompression valve and metering spring for precise fuel
•• Engine (max power) : 4.1 HP/3 kW regulation
•• No Load Speed/Max. Spindle Speed : 9,100 / 4,300 RPM
•• Fuel Type : Unleaded gas •• Start capacitor with start support function stores electrical energy resulting in
•• Fuel Tank Capacity : 37 oz. significantly less pull start force
•• Arbor w/ Adaptor : 20mm/1” adaptor
•• Max. Cutting Depth : 4-13/16” •• On-Off-Choke operation switch on a single lever for operator convenience
•• Dry Weight : 28.3 lbs. •• Five-stage, foam-paper-nylon system with advance direction air flow provides
•• Product Length (in.) : 30-3/4”
•• Product Height (in.) : 17.875” cleaner air for better saw performance
•• Product Width (in.) : 12.25” •• SLR Muffler recycles un-burned fuel vapor for reduced scavenging-losses and
•• Wheel Diameter (in.) : 14”
•• User Type : Professional up to 15% improved fuel consumption
•• Power Type : 4-stroke gas •• Microchip controlled carburetor designed to compensate engine timing
•• Overall Length : 30-3/4”
•• Power Tool Product Type : Other according to work load
•• Shipping Weight : 35.2 lbs. •• Cutting arm position simply changes from center position to flush (outboard)
•• UPC Code : 088381-620017
position allowing cuts directly adjacent to curb edges, wall or directly above
the ground
•• 16” wheel capacity increases maximum cutting depth to 5-3/4”
•• Cushioned operator grips with 4 vibration-absorption rubber buffers for
increased operator comfort
•• Aluminum guard and wheel pressure plates to reduce weight

EK7651H 14” 75.6 cc MM4® 4‑Stroke Engine Power Cutter

•• Engine Displacement (cu.in./cc) : 4.5 cu.in. (73 cc) •• Automatic engine decompression valve is engineered into the cam gear
•• Engine (max power) : 5.1 HP/3.8 kW to reduce pull-start force by 40%
•• No Load Speed/Max. Spindle Speed : 9,350 / 4,300 RPM
•• Fuel Mixture : 50:1 •• Pressure compensated carburetor with vented choke plate allows for
•• Fuel Tank Capacity : 37 oz. optimum fuel delivery and reduces the occurrence of flooding during
•• Arbor w/ Adaptor : 20mm/1” adaptor cold starts
•• Max. Cutting Depth : 4-13/16”
•• Dry Weight : 22 lbs. •• Integrated all aluminum wheels reduce fatigue during long straight cuts
•• Product Height (in.) : 14.5” and retract when not in use to prevent unexpected movement
•• Product Length (in.) : 30-1/4”
•• Product Width (in.) : 11.375” •• Eliminates the need for separate mixed oil/fuel can
•• Wheel Diameter (in.) : 14” •• Lower noise at 92.7dB(A) and smoother idle for continuous operation
•• Maximum Cut Depth (in.) : 4-13/16” •• Five-stage, foam-paper-nylon filtration system with advance direction air
•• User Type : Professional
•• Power Type : 2-stroke gas flow provides cleaner air for better engine durability
•• Overall Length : 30-1/4” •• Lower fuel consumption at .45 gallons per hour
•• Power Tool Product Type : Other •• Reduced exhaust and intake carbon build-up for long cylinder life
•• Shipping Weight : 29.3 lbs. •• Three ring piston for improved commercial engine durability
•• UPC Code : 088381-330510 •• Clear primer bulb facilitates fuel delivery to the carburetor for easier

cold starts

EK7301 14” 73 cc Power Cutter

•• Engine Displacement (cu.in./cc) : 4.5 cu.in. (73 cc) •• Improved decompression valve and metering spring for precise
•• Engine (max power) : 5.1 HP/3.8 kW fuel regulation at start up
•• No Load Speed/Max. Spindle Speed : 9,350 / 4,300 RPM
•• Fuel Mixture : 50:1 •• Start capacitor with start support function resulting in significantly
•• Fuel Tank Capacity : 37 oz. less pull start force
•• Arbor w/ Adaptor : 20mm/1” adaptor
•• Max. Cutting Depth : 4-13/16” •• On-Off-Choke operation switch on a single lever for operator
•• Dry Weight : 22 lbs. convenience
•• Product Height (in.) : 14.5”
•• Product Length (in.) : 30-1/4” •• Five stage filtration system with advanced directional air flow,
•• Product Width (in.) : 11.375” provides cleaner air for better saw performance
•• Wheel Diameter (in.) : 14”
•• Maximum Cut Depth (in.) : 4-13/16” •• Starter grip decompression valve for faster starting
•• User Type : Professional •• Improved ignition system with large flywheel and rare earth
•• Power Type : 2-stroke gas
•• Overall Length : 30-1/4” magnets create more efficient power.
•• Power Tool Product Type : Other •• Reinforced aluminum blade guard with 70 degrees range of
•• Shipping Weight : 29.3 lbs.
•• UPC Code : 088381-330510 limitless positioning using a marked knob handle
•• Cutting arm position simply changes from center position to flush
171
(outboard) position allowing cuts directly adjacent to curb edges,
wall or directly above the ground
•• Cushioned operator grips with 4 vibration-absorption rubber
buffers for increased operator comfort
•• Microchip controlled carburetor designed to compensate engine
timing according to work load

1-800-778-2217

TOOLS: CUTTERS AND DRILLS

EK6101 14” 61 cc Power Cutter

•• Arbor : 1” •• Cyclonic air Intake delivers more air, more efficiently and increases air filter life
•• Max. Cutting Depth (14” diamond blade) : 5” by discarding 90% of larger debris
•• Max. Cutting Depth (14” cut-off wheel) : 5”
•• No Load Speed : 3,800 RPM •• Start capacitor with start support function resulting in significantly less pull
•• AMPS : 15 start force
•• Overall Length : 26-1/2”
•• Net Weight : 23.8 lbs. •• Smaller hub and drive wheel assembly increases maximum cutting depth to
•• Blade Diameter : 14” 5-1/8”
•• GFCI plug : No
•• Includes dust extraction guard : Yes •• Stratified Air Scavenging (SAS) sends air flow through the transfer port to push
•• Power Tool Product Type : Corded the burned gases through the exhaust outlet recovering 75% of unburned fuel
•• Power Type : Corded and reducing fuel consumption by 20%
•• Shipping Weight : 35.2 lbs.
•• UPC Code : 088381-077477 •• Larger surface inverted intake and filter system extends filter life and service
intervals

•• Sliding front engine mounts help absorb vibration by detaching when cutting
pressure is applied

•• Multi-ribbed, self tensioning belt is engineered to provide a more consistent
transfer of power

•• Lower noise at 97 dB(A) and smoother idle for continuous operation
•• Clear primer bulb facilitates fuel delivery to the carburetor for easier cold

starts
•• On-Off choke operation switch on a single lever with touch-stop function for

operator convenience

4114 14” Electric Angle Cutter, with 14” Diamond Blade

TOOLS: CUTTERS AND DRILLS •• Max. Capacity (concrete drilling) : 3/4” •• SJS™ technology is a mechanical clutch system that helps prevent motor and
•• Capacities (steel: low, high) : 5/8”, 5/16” gear damage by allowing the drive shaft to slip if the wheel is forced to stop
•• Capacities (wood: low, high) : 1-9/16”, 1”
•• No Load Speed (var. 2 spd) : 0 - 1,200 / 0 - 2,900 RPM •• Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding
•• Blows Per Minute (2 speed) : 0 - 24,000 / 0 - 58,000 BPM applications
•• AMPS : 8.2
•• Chuck Size : 1/2” •• AC/DC switch for use with alternative power source
•• Overall Length : 14-1/4” •• Tool base can be removed for cutting closer to walls; guide wheels on the tool
•• Net Weight : 5.3 lbs.
•• LED light : Yes guard for smooth traveling
•• Power Type : Corded •• Built-in vacuum attachment port for efficient removal of dust and debris
•• Optimum Range (concrete drilling) : 5/32” - 7/16” •• Rubber shield helps keep debris away from operator and from entering the
•• Shipping Weight : 9.55 lbs.
•• UPC Code : 088381-051668 motor
•• Tool base adjusts allowing up to 5” cutting depth; best for cutting split face

block when building retaining walls
•• Guide wheels on the tool guard ensure smooth traveling of tool over surface

material when base is removed for cutting closer to walls
•• Positioning of the tool body can be adjusted (0°-80°) for operator comfort;

operates independently of cutting depth for convenience and efficiency
•• Base has front and rear cutting guides for increased accuracy

HP2070F 3/4” Hammer Drill, with L.E.D. Light

•• Max. Capacity (concrete drilling) : 3/4” •• Powerful 8.2 AMP motor for heavy duty use
•• Capacities (steel: low, high) : 5/8”, 5/16” •• 2-mode operation for “Rotation Only” or “Hammering with
•• Capacities (wood: low, high) : 1-9/16”, 1”
•• No Load Speed (var. 2 spd) : 0 - 1,200 / 0 - 2,900 RPM Rotation” for multiple applications
•• Blows Per Minute (2 speed) : 0 - 24,000 / 0 - 58,000 BPM •• Large trigger switch and 360° swivel side handle for added
•• AMPS : 8.2
•• Chuck Size : 1/2” comfort
•• Overall Length : 14-1/4” •• Built-in L.E.D. light illuminates the drilling surface for more
•• Net Weight : 5.3 lbs.
•• LED light : Yes productivity in low light applications
•• Power Type : Corded •• Torque limiting clutch engineered to reduce gear damage by
•• Optimum Range (concrete drilling) : 5/32” - 7/16”
•• Shipping Weight : 9.55 lbs. automatically disengaging gears if bit binds
•• UPC Code : 088381-051668 •• Conveniently located reverse slide switch for easy access and

use
•• Recessed lock-on button for continuous use
•• Lightweight (5.6 lbs.) for reduced operator fatigue
•• All-ball bearing construction for longer tool life
•• Ergonomic rubberized grip for increased comfort on the job

HP2050 3/4” Hammer Drill, with L.E.D. Light

•• Max. Capacity (concrete drilling) : 3/4” •• Powerful 6.6 AMP motor for the most demanding applications
•• Capacities (steel: low, high) : 1/2”, 5/16” •• Conveniently-located 2-mode switch allows for fast mode changes
•• Capacities (wood: low, high) : 1-9/16”, 1”
•• No Load Speed (var. 2 spd) : 0 - 1,200 / 0 - 2,900 RPM between “Rotation Only” and “Hammering with Rotation”
•• Blows Per Minute (2 speed) : 0 - 24,000 / 0 - 58,000 BPM •• Variable 2-speed (0-1,200 & 0-2,900 RPM) with variable speed
•• AMPS : 6.6
•• Chuck Size : 1/2” control dial
•• Overall Length : 14-1/4” •• Built-in clutch engineered to reduce gear damage by
•• Net Weight : 5.6 lbs.
•• LED light : Yes automatically disengaging gears if bit binds
•• Power Type : Corded •• Built-in L.E.D. light illuminates the work area
•• Optimum Range (concrete drilling) : 5/32” - 7/16” •• Positive stop mode selector prevents accidental mode
•• Shipping Weight : 8.8 lbs.
•• UPC Code : 088381-043236 disengagement
•• Large trigger switch and 360° swivel side handle for added

comfort
•• Recessed lock-on button for continuous use
•• All-ball bearing construction for longer tool life
•• Ergonomic rubberized grip for increased comfort on the job

172 HPIONLINE®.COM

TOOLS: DRILLS

HP2050F 3/4” Hammer Drill, with L.E.D. Light TOOLS: DRILLS

•• Max. Capacity (concrete drilling) : 3/4” •• Powerful 6.6 AMP motor for the most demanding applications
•• Capacities (steel: low, high) : 1/2”, 5/16” •• Conveniently-located 2-mode switch allows for fast mode changes
•• Capacities (wood: low, high) : 1-9/16”, 1”
•• No Load Speed (var. 2 spd) : 0 - 1,200 / 0 - 2,900 RPM between “Rotation Only” and “Hammering with Rotation”
•• Blows Per Minute (2 speed) : 0 - 24,000 / 0 - 58,000 BPM •• Variable 2-speed (0-1,200 & 0-2,900 RPM) with variable speed
•• AMPS : 6.6
•• Chuck Size : 1/2” control dial
•• Overall Length : 14-1/4” •• Built-in clutch engineered to reduce gear damage by
•• Net Weight : 5.6 lbs.
•• LED light : Yes automatically disengaging gears if bit binds
•• Power Type : Corded •• Built-in L.E.D. light illuminates the work area
•• Optimum Range (concrete drilling) : 5/32” - 7/16” •• Positive stop mode selector prevents accidental mode
•• Shipping Weight : 8.8 lbs.
•• UPC Code : 088381-043236 disengagement
•• Large trigger switch and 360° swivel side handle for added
HP2010N
comfort
•• Capacities (concrete: low, high) : 3/4”, 1/2” •• Recessed lock-on button for continuous use
•• Capacities (steel: low, high) : 1/2”, 1/4” •• All-ball bearing construction for longer tool life
•• Capacities (wood: low, high) : 1-1/2”, 3/4” •• Ergonomic rubberized grip for increased comfort on the job
•• No Load Speed (var. 2 spd) : 0 - 900 / 0 - 2,300 RPM
•• Blows Per Minute (2 speed) : 0 - 18,000 / 0 - 46,000 BPM 3/4” Hammer Drill
•• AMPS : 6
•• Chuck Size : 1/2” •• Powerful 6 AMP motor for the most demanding
•• Overall Length : 13-3/4” applications
•• Net Weight : 6.4 lbs.
•• LED light : No •• 2-speed (0-900 & 0-2,300 RPM) with speed control
•• Power Type : Corded switch
•• Optimum Range (concrete drilling) : 5/32” - 7/16”
•• Shipping Weight : 11.6 lbs. •• 2-mode operation for “Rotation Only” or “Hammering
•• UPC Code : 088381-001328 with Rotation” for multiple applications

•• Variable speed switch for easy starting of holes
•• All-ball bearing construction for longer tool life
•• Adjustable side handle for greater control
•• Depth gauge for “drop-in” type anchors
•• Recessed lock-on button for continuous use
•• Lightweight (6.4 lbs.) for reduced operator fatigue
•• Double insulated

HP1641K 5/8” Hammer Drill, with Keyless Chuck, Tool Case

•• Max. Capacity (concrete drilling) : 5/8” •• 2-mode operation for “Rotation Only” or “Hammering
•• Capacity (steel) : 1/2” with Rotation” for multiple applications
•• Capacity (wood) : 1-3/16”
•• No Load Speed (variable speed) : 0 - 2,800 RPM •• Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800
•• Blows Per Minute (variable speed) : 0 - 44,800 BPM for the most demanding applications

BPM •• Lightweight (4.3 lbs.) with large drilling capacity up to
•• AMPS : 6 5/8” in concrete
•• Chuck Size : 1/2”
•• Overall Length : 11-7/8” •• Soft grip handle provides increased comfort on
•• Net Weight : 4.3 lbs. the job
•• LED light : No
•• Power Type : Corded •• All-ball bearing construction for longer tool life
•• Optimum Range (concrete drilling) : 1/8” - 1/4” •• Extended life brushes are longer for more work between
•• Shipping Weight : 7.5 lbs.
•• UPC Code : 088381-096645 service intervals and less downtime
•• Recessed lock-on button for continuous use
•• Keyless chuck for easy bit installation and removal
•• Reversing switch is conveniently located
•• Depth gauge for increased drilling consistency

HP1640 5/8” Hammer Drill

•• Max. Capacity (concrete drilling) : 5/8” •• Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800
•• Capacity (steel) : 1/2” BPM for the most demanding applications
•• Capacity (wood) : 1-3/16”
•• No Load Speed (variable speed) : 0 - 2,800 RPM •• 2-mode operation for “Rotation Only” or “Hammering
•• Blows Per Minute (variable speed) : 0 - 44,800 with Rotation” for multiple applications

BPM •• Soft grip handle provides increased comfort on
•• AMPS : 6 the job
•• Chuck Size : 1/2”
•• Overall Length : 11-7/8” •• All-ball bearing construction for longer tool life
•• Net Weight : 4.4 lbs. •• Recessed lock-on button for continuous use
•• LED light : No •• Lightweight (4.4 lbs.) with large drilling capacity up to
•• Power Type : Corded
•• Shipping Weight : 6 lbs. 5/8” in concrete
•• UPC Code : 088381-096614 •• Extended life brushes are longer for more work between

service intervals and less downtime
•• Large 2-finger trigger for added convenience
•• Reversing switch is conveniently located
•• Depth gauge for increased drilling consistency

1-800-778-2217 173

TOOLS: DRILLS

6407 3/8” Drill

•• Capacity (steel) : 3/8” •• Powerful 4.9 AMP motor for improved performance
•• Capacity (wood) : 1” •• Variable speed (0-2,500 RPM) for drilling in a wide
•• No Load Speed (variable speed) : 0 - 2,500 RPM
•• AMPS : 4.9 variety of materials
•• Overall Length : 10-9/32” •• In-line handle design for better accuracy
•• Net Weight : 3.1 lbs. •• Reversing switch is conveniently located
•• Handle : Pistol •• All-ball bearing construction for durability and longer
•• Max. no load speed : 2,500 RPM
•• Power Type : Corded tool life
•• Shipping Weight : 4 lbs. •• Low decibel rating (79dB) for quieter operation
•• UPC Code : 088381-022361 •• Large trigger switch for comfortable operation
•• Large recessed lock-on button
•• Weighs only 3.1 lbs. for reduced operator fatigue
•• 1-year limited warranty

TOOLS: DRILLS 6302H 1/2” Drill

•• Capacity (steel) : 1/2” •• Powerful 6.5 AMP motor for improved performance
•• Capacity (wood) : 1-1/2” •• Variable speed (0 - 550 RPM) for drilling in a wide variety
•• No Load Speed (variable speed) : 0 - 950 RPM
•• AMPS : 7 of materials
•• Overall Length : 12” •• Heavy duty industrial 1/2” drill chuck engineered for
•• Net Weight : 4.8 lbs.
•• Handle : Pistol positive bit retention
•• Power Type : Corded •• Compact with less weight (4.8 lbs.)
•• Max. no load speed : 950 RPM •• Large, multi-position side handle for operator comfort
•• Shipping Weight : 6.4 lbs.
•• UPC Code : 088381-036450 and control
•• Large and conveniently located reversing switch and

lock-on button
•• Pistol grip design for comfort and convenience
•• Convenient belt clip
•• Double insulated
•• 1-year limited warranty

XFD061 18V LXT® Lithium‑Ion Compact Brushless Cordless 1/2” Driver‑Drill Kit (3.0Ah)

•• Capacity (steel) : 1/2” •• Mechanical 2-speed transmission (0-400 & 0-1,550 RPM) for a wide
•• Capacity (wood) : 1-1/2” range of drilling and fastening applications
•• No Load Speed (var. 2 spd) : 0 - 400 / 0 - 1,550 RPM
•• Maximum Torque (in.lbs./N•m) : 530 in.lbs./60N•m •• BL™ Brushless motor delivers 530 in.lbs. of Max Torque
•• Battery : 18V LXT® Lithium-Ion •• Efficient BL™ Brushless Motor is electronically controlled to
•• Overall Length : 7-1/4”
•• Net Weight (with battery) : 3.8 lbs. optimize battery energy use for up to 50% longer run time per
•• Handle : Pistol charge
•• Power Type : Cordless •• The BL™ Brushless Motor eliminates carbon brushes, enabling the
•• Shipping Weight : 7.5 lbs. BL™ Motor to run cooler and more efficiently for longer life
•• UPC Code : 088381-847285 •• The electronically-controlled BL™ Brushless Motor efficiently uses
energy to match torque and RPM to the changing demands of the
application
•• Extreme Protection Technology (XPT™) engineered for improved
dust and water resistance for operation in harsh job site
conditions
•• Compact and ergonomic design at only 7-1/4”
•• Weighs only 3.8 lbs. with battery for reduced operator fatigue
•• Rubberized soft grip handle provides increased comfort on the
job
•• Built-in dual L.E.D. lights with afterglow illuminate the work
area

XFD12T 18V LXT® Lithium‑Ion Compact Brushless Cordless 1/2” Driver‑Drill Kit (5.0Ah)

•• Capacity (steel) : 1/2” •• Mechanical 2-speed transmission (0-500 & 0-2,000 RPM) for a
•• Capacity (wood) : 1-1/2” wide range of drilling and fastening applications
•• No Load Speed (var. 2 spd) : 0 - 500 / 0 - 2,000 RPM
•• Maximum Torque (in.lbs./N•m) : 530 in.lbs./60N•m •• BL™ Brushless motor delivers 530 in.lbs. of Max Torque
•• Battery : 18V LXT® Lithium-Ion •• Efficient BL™ Brushless Motor is electronically controlled to
•• Overall Length : 6-3/4”
•• Net Weight (with battery) : 3.9 lbs. optimize battery energy use for up to 50% longer run time per
•• Handle : Pistol charge
•• Power Type : Cordless •• The BL™ Brushless Motor eliminates carbon brushes, enabling
•• Shipping Weight : 11.6 lbs. the BL™ Motor to run cooler and more efficiently for longer life
•• UPC Code : 088381-826471 •• The electronically-controlled BL™ Brushless Motor efficiently uses
energy to match torque and RPM to the changing demands of the
174 application
•• Extreme Protection Technology (XPT™) engineered for improved
dust and water resistance for operation in harsh job site
conditions
•• Compact and ergonomic design at only 6-3/4”
•• Weighs only 3.9 lbs. with battery for reduced operator fatigue
•• Rubberized soft grip handle provides increased comfort on the
job
•• Built-in dual L.E.D. lights with afterglow illuminate the work
area

HPIONLINE®.COM

TOOLS: DRILLS

XPH07TB 18V LXT® Lithium‑Ion Brushless Cordless 1/2” Hammer Driver‑Drill Kit (5.0Ah)

•• Capacity (steel) : 1/2” •• BL™ Brushless Motor delivers 1,090 in.lbs. of Max Torque
•• Capacity (wood) : 3” •• 0-31,500 BPM for fast hammer drilling in masonry materials
•• Capacity (masonry) : 5/8” •• Efficient BL™ Brushless motor is electronically controlled to
•• No Load Speed (var. 2 spd) : 0 - 550 / 0 - 2,100 RPM
•• Blows Per Minute (2 speed) : 0 - 8,250 / 0 - 31,500 BPM optimize battery energy use for up to 50% longer run time per
•• Maximum Torque (in.lbs./N•m) : 1,090 in.lbs./125N•m charge
•• Battery : 18V LXT® Lithium-Ion •• The BL™ Brushless Motor eliminates carbon brushes, enabling
•• Overall Length : 8-1/8” the BL™ Motor to run cooler and more efficiently for longer life
•• Net Weight (with battery) : 5.9 lbs. •• The electronically-controlled BL™ Brushless Motor efficiently uses
•• LED light : Yes energy to match torque and RPM to the changing demands of the
•• Power Type : Cordless application
•• Shipping Weight : 16.12 lbs. •• All metal variable 2-speed transmission (0-550 & 0-2,100 RPM)
•• UPC Code : 088381-807364 for a wide range of drilling, fastening and hammer drilling
applications
•• All metal gears and gear housing for maximum job site
durability
•• All metal 1/2” ratcheting chuck for improved bit gripping strength
and durability
•• Compact and ergonomic design at only 8-1/8” long
•• Weighs only 5.9 lbs. with battery for reduced operator fatigue

XFD11RB 18V LXT® Lithium‑Ion Sub‑Compact Brushless Cordless 1/2” Driver‑Drill Kit (2.0Ah)

•• Capacity (steel) : 1/2” •• Compact and ergonomic design at only 6-3/8” long TOOLS: DRILLS
•• Capacity (wood) : 1-7/16” •• Weighs only 2.8 lbs. with battery for reduced operator fatigue
•• No Load Speed (var. 2 spd) : 0 - 500 / 0 - 1,700 RPM •• Ideal for working in tight spaces
•• Maximum Torque (in.lbs./N•m) : 350 in.lbs./40N•m •• Mechanical variable 2-speed transmission (0-500 & 0-1,700
•• Battery : 18V LXT® Compact Lithium-Ion
•• Overall Length : 6-3/8” RPM) for a wide range of drilling, fastening and hammer drilling
•• Net Weight (with battery) : 2.8 lbs. applications
•• Handle : Pistol •• Dual L.E.D. lights illuminate the work area
•• Power Type : Cordless •• Ergonomically designed handle with rubberized soft grip provides
•• Shipping Weight : 10.6 lbs. increased comfort
•• UPC Code : 088381-841856 •• BL™ Brushless Motor delivers 350 in.lbs. of Max Torque
•• Efficient BL™ Brushless motor is electronically controlled to
optimize battery energy use for up to 50% longer run time per
charge
•• The BL™ Brushless Motor eliminates carbon brushes, enabling
the BL Motor to run cooler and more efficiently for longer life
•• The electronically-controlled BL™ Brushless Motor efficiently uses
energy to match torque and RPM to the changing demands of the
application

DS4000 1/2” Spade Handle Drill

•• Capacity (steel) : 1/2” •• Durable all-metal motor housing is jobsite tough yet
•• Capacity (wood) : 1-1/2” lightweight
•• No Load Speed : 500 RPM
•• AMPS : 9 •• Rocker switch for quick transition between forward and
•• Overall Length : 14-1/4” reverse operation
•• Net Weight : 8.8 lbs.
•• Handle : Spade •• Precision ground metal gears engineered to withstand the
•• Max. no load speed : 500 RPM rigors of rotation changes
•• Power Type : Corded
•• Shipping Weight : 13.2 lbs. •• 12” pipe handle with rubberized grip for greater control and
•• UPC Code : 088381-047357 improved ergonomics

•• All-ball bearing construction for longer tool life and smooth
operation

•• Powerful 9.0 AMP motor delivers 500 RPM and provides
aggressive torque to match the job

•• Heavy-duty industrial 1/2” drill chuck for positive bit
retention

•• Large trigger switch for smooth and easy operation
•• D-handle rotates 360° with 24 positive stops for multi-

position operation
•• Externally accessible brushes for greater serviceability

DA3010F 3/8” Angle Drill, reversible

•• Capacity (steel) : 3/8” •• Powerful 4.0 AMP motor with less weight (3.5 lbs.)
•• Capacity (wood) : 13/16” •• Variable speed (0 - 2,400 RPM) for drilling in a wide
•• No Load Speed (variable speed) : 0 - 2,400 RPM
•• AMPS : 4 variety of materials
•• Overall Length : 10-5/8” •• Compact design (10-5/8” long and 2-5/8” head width)
•• Net Weight : 3.5 lbs.
•• Handle : Angle for use when working between framing studs and other
•• Max. no load speed : 2,400 RPM close quarter applications
•• Power Type : Corded •• Paddle switch with speed limiting dial to prevent over-
•• Shipping Weight : 4.21 lbs. tightening of fasteners
•• UPC Code : 088381-046947 •• Built-in clutch engineered to prevent gear damage by
automatically disengaging gears if the bit binds
•• Small diameter barrel grip for easy handling
•• Built-in L.E.D. light illuminates the work area
•• All-ball bearing construction for longer tool life
•• Double insulated
•• 1-year limited warranty

1-800-778-2217 175

TOOLS: DRILLS AND GRINDERS

TOOLS: DRILLS AND GRINDERS DA4031 1/2” Angle Drill, 2‑Speed, Reversible

•• Capacity (steel) : 1/2” •• Powerful 10 AMP motor for improved performance
•• Capacity (wood) : 1-1/2” •• 2-Speed (300 & 1,200 RPM) for increased drilling versatility
•• No Load Speed (2 spd) : 300/1,200 RPM •• Built-in clutch reduces gear damage by automatically disengaging
•• AMPS : 10
•• Overall Length : 18-1/4” gears if the bit binds (low speed only)
•• Net Weight : 12.3 lbs. •• Adjustable top handle with hex wrench storage for easy
•• Handle : Angle
•• Max. no load speed : 1,200 RPM positioning
•• Power Type : Corded •• Ergonomically designed rubberized grip for reduced operator
•• Shipping Weight : 22.3 lbs.
•• UPC Code : 088381-040754 fatigue
•• Compact design for use when working between framing studs
DA6301
and other close quarter applications
•• Capacity (steel) : 1/2” •• Strong supporting side handle with hex wrench storage
•• Capacity (wood) : 1-1/2” •• Sidewinder® handle rotates 90° left or right
•• No Load Speed (2 spd) : 300/1,200 RPM •• Tool case fits tool even with attached bit
•• AMPS : 7.5 •• Ideal for frames, plumbers, electricians and general
•• Overall Length : 16-1/8”
•• Net Weight : 9.5 lbs. construction
•• Handle : Angle
•• Max. no load speed : 1,200 RPM 1/2” Angle Drill, 2‑speed, reversible
•• Power Type : Corded
•• Shipping Weight : 20 lbs. •• Powerful 7.5 AMP motor for improved performance
•• UPC Code : 088381-034982 •• 2-speed (300 & 1,200 RPM) for increased drilling

DA4000LR versatility
•• Triple gear reduction system engineered for maximum
•• Capacity (steel) : 1/2”
•• Capacity (wood) : 1-1/2” power
•• No Load Speed (2 spd) : 400/900 RPM •• Built-in clutch reduces gear damage by disengaging
•• AMPS : 7.5
•• Overall Length : 16-1/4” gears if bit binds
•• Net Weight : 8.1 lbs. •• Rocker switch for quick transition between forward and
•• Handle : Angle
•• Max. no load speed : 900 RPM reverse operation
•• Power Type : Corded •• Compact design for use when working between framing
•• Shipping Weight : 17.5 lbs.
•• UPC Code : 088381-039499 studs and other close quarter applications
•• All-ball and needle bearing construction for longer tool
6408/6408K
life
•• Capacity (steel) : 3/8” •• Weighs only 9.5 lbs. for reduced operator fatigue
•• Capacity (wood) : 1” •• Large 2-position side handle for increased operator
•• No Load Speed (variable speed) : 0 - 2,500 RPM
•• AMPS : 4.9 comfort and control
•• Overall Length : 10-9/32” •• 1-year limited warranty
•• Net Weight : 3.1 lbs.
•• Handle : Pistol DA4000LR
•• Max. no load speed : 2,500 RPM
•• Power Type : Corded •• Powerful 7.5 AMP motor for improved performance
•• Shipping Weight : 4 lbs. •• 2-Speed (0 - 400 & 0 - 900 RPM) for increased drilling
•• UPC Code : 088381-020558
versatility
•• Ergonomically designed rubberized grip for comfort
•• All-ball bearing construction for longer tool life and

smooth operation
•• Large multi-position side handle for operator comfort

and control
•• Angle attachment may be removed and drill used as a

straight drill
•• 360° angle attachment for drilling in any position
•• Compact design for use when working between framing

studs and other close quarter applications
•• Trigger sensitive variable speed switch for precise

control
•• Weighs only 8.1 lbs.

3/8” Drill

•• Powerful 4.9 AMP motor
•• Variable speed (0-2,500 RPM) for drilling in a wide variety of

materials
•• Low decibel rating (79dB) for quieter operation
•• Keyless chuck for fast and easy bit installation and removal
•• In-line handle design for improved performance
•• Reversing switch is conveniently located
•• All ball bearing construction for durability and longer tool life
•• Large trigger switch for comfortable operation
•• Large recessed lock-on button
•• Weighs only 3.1 lbs

176 HPIONLINE®.COM

TOOLS: GRINDERS

XAG11T 18V LXT® Lithium-Ion Brushless Cordless 4-1/2” / 5” Paddle
Switch Cut-Off/Angle Grinder Kit, with Electric Brake (5.0Ah)
•• Wheel Diameter 5”
•• Battery 18V LXT® Lithium-Ion •• The BL™ Brushless Motor eliminates carbon brushes, enabling
•• No Load Speed 8,500 RPM the BL™
•• Spindle Thread 5/8” - 11 UNC
•• Lock On Switch No •• Motor to run cooler and more efficiently for longer life; delivers
•• Lock-Off Yes 8,500 RPM
•• Grinder Switch Type Body grip/paddle
•• Overall Length 14-1/4” •• Efficient BL™
•• Net Weight (with battery) 5.8 lbs. •• Brushless motor is electronically controlled to optimize battery
•• UPC Code (XAG11T) 088381-849289
•• UPC Code (XAG11Z) 088381-814942 energy use for up to 50% longer run time per charge
•• The electronically-controlled BL™ Brushless Motor efficiently uses

energy to match torque and RPM to the changing demands of the
application
•• Compact and ergonomic design at only 14-1/4” long
•• Weighs only 5.8 lbs. with battery for reduced operator fatigue
•• Rubberized soft grip provides increased comfort on the job
•• 3-stage L.E.D. gauge indicates battery charge level
•• Extreme Protection Technology (XPT™) is engineered for
improved dust and water resistance for operation in harsh
conditions

XAG21ZU 18v LXT® Lithium-Ion Brushless Cordless 4-1/2’’ / 5’’ Paddle Switch Cut-Off/Angle
Grinder, with Electric Brake and AWS™, Tool Only

•• Wheel Diameter 5’’ •• Electric Brake stops the grinding or cut-off wheel in 2 seconds TOOLS: GRINDERS
•• Battery 18V LXT® Lithium-Ion •• or less for maximum productivity
•• No Load Speed (variable speed) 3,000 - 8,500 RPM •• Electronic Torque Control turns the motor off if rotation speed
•• Spindle Thread 5/8’’ - 11 UNC •• suddenly slows or wheel is forced to stop
•• Lock-On No •• Automatic-start Wireless System (AWS) utilizes Bluetooth™
•• Lock-Off Yes •• technology for wireless power-on/off communication between
•• Switch Type Body grip/paddle •• tool and dust extractor
•• Electric Brake Yes •• Automatic Speed Change™ technology adjusts speed and
•• Variable speed control dial Yes
•• Overall Length 15’’ torque
•• Net Weight (with battery) 5.7 lbs. •• during operation for optimum performance
•• Shipping Weight 7.6 lbs. •• The BL™ Brushless Motor eliminates carbon brushes,
•• UPC Code 088381-854177
•• Power Type Cordless enabling
•• the BL™ Motor to run cooler and more efficiently for longer life
•• Variable speed control dial allows manual RPM adjustment
•• (3,000-8,500) to match the speed to the application

GA6020YX1 6” SJS™ Cut‑Off/Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 6” •• Powerful 10.5 AMP motor delivers 10,000 RPM to handle the
•• AMPS : 10.5 most demanding applications
•• No Load Speed : 10,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : No prevent motor and gear damage by allowing the drive shaft
•• Lock-Off : Yes to slip if the wheel is forced to stop
•• Switch Type : Rear trigger switch
•• Overall Length : 14” •• Spiral bevel gears for smoother rotations and a more
•• Net Weight : 6.7 lbs. efficient transfer of energy
•• Variable speed control dial : No
•• Power Type : Corded •• Zig-zag varnish protects the armature coil from dust and
•• Shipping Weight : 10 lbs. debris for longer motor life
•• UPC Code : 088381-807029
•• Labyrinth construction prevents debris from penetrating the
motor, bearings and gears for longer tool life

•• AC/DC switch for use with alternative power source
•• Externally accessible brushes for greater serviceability
•• Rear handle and trigger design for more comfort during

extended use
•• “Tool-less” grinding wheel guard for more convenient

adjustments
•• Includes both cutting/grinding wheels and guards

GA7060 7” Angle Grinder, with Lock‑On Switch

•• Wheel Diameter : 7” •• Rear handle trigger switch with lock-on feature; lock-off feature requires two
•• AMPS : 15 actions to start the grinder
•• No Load Speed : 8,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Redesigned motor with greater armature stability and larger commutator bars
•• Lock-On : No for 3 times longer life compared to previous model
•• Lock-Off : Yes
•• Switch Type : Rear trigger handle •• Zig-zag epoxy on both sides of the armature coil and a powder-coated field for
•• Overall Length : 17-3/4” added protection from dust and debris for longer motor life
•• Net Weight : 11.7 lbs.
•• Variable speed control dial : No •• Labyrinth construction seals and protects the motor and bearings from dust
•• Power Type : Corded and debris for longer tool life
•• Shipping Weight : 15.2 lbs.
•• UPC Code : 088381-809818 •• Spiral bevel gears for smoother rotations and a more efficient transfer of
energy

•• Aluminum gear housing provides superior gear alignment and smoother
transmission for increased durability

•• AC/DC switch for use with alternative power source
•• Side handle installs in three locations for operator comfort in various

applications
•• Large spindle lock button for easier wheel changes while wearing gloves
•• Brush spiral spring allows for a 30% larger brush and increased air-flow

compared to previous model

1-800-778-2217 177

TOOLS: GRINDERS

GA7061 7” SJS™II Angle Grinder, with No Lock-On Switch

•• Wheel Diameter 7” •• Powerful 15.0 AMP motor delivers 8,500 RPM for optimum
•• AMPS 15 durability and performance
•• No Load Speed 8,500 RPM
•• Spindle Thread 5/8” - 11 UNC •• Redesigned motor with greater armature stability and larger
•• Lock-On No commutator bars for 3 times longer life compared to previous
•• Lock-Off Yes model
•• Grinder Switch Type: Rear trigger handle
•• Overall Length 17-3/4” •• SJS™II provides a leaf spring and cam gear drive mechanism that
•• Net Weight 11.7 lbs. is engineered to reduce vibration for increased operator comfort
•• Shipping Weight 15.8 lbs. during extended use
•• UPC Code 088381-809870
•• Rear handle trigger switch with no lock-on feature; lock-off feature
GA7031Y requires two actions to start the grinder

•• Labyrinth construction seals and protects the motor and bearings
from dust and debris for longer tool life

•• Spiral bevel gears for smoother rotations and a more effi cient
transfer of energy

•• Aluminum gear housing provides superior gear alignment and
smoother transmission for increased durability

•• AC/DC switch for use with alternative power source
•• Side handle installs in three locations for operator comfort in

various applications

7” Angle Grinder, with AC/DC Switch

TOOLS: GRINDERS •• Wheel Diameter : 7” •• Powerful 15.0 AMP motor delivers 8,500 RPM for faster material
•• AMPS : 15 removal
•• No Load Speed : 8,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Spiral bevel gears for smoother rotations and a more efficient
•• Lock-On : No transfer of energy
•• Lock-Off : Yes
•• Switch Type : Rear trigger switch •• Labyrinth construction prevents debris from penetrating the
•• Overall Length : 19-7/8” motor, bearings and gears for longer tool life
•• Net Weight : 13.5 lbs.
•• Variable speed control dial : No •• Zig-zag varnish protects the armature coil from dust and debris
•• Power Type : Corded for longer motor life
•• Shipping Weight : 18 lbs.
•• UPC Code : 088381-604246 •• Wire mesh intake covers are engineered to prevent debris from
entering motor especially when used in close proximity to other
GA7001L grinders

•• Wheel Diameter : 7” •• Three position vibration absorbing side handle provides increased
•• AMPS : 15 comfort on the job
•• No Load Speed : 6,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Rotatable back handle for increased comfort in various
•• Lock-On : Yes applications
•• Lock-Off : No
•• Switch Type : Rear trigger switch •• Large rubber tool rest to help protect tool and surfaces from
•• Overall Length : 16-1/4” damage
•• Net Weight : 12.6 lbs.
•• Variable speed control dial : No •• AC/DC switch for use with alternative power source
•• Power Type : Corded •• “Tool-less” wheel guard for more convenient adjustments
•• Shipping Weight : 17.5 lbs.
•• UPC Code : 088381-001250 7” Angle Grinder, with AC/DC Switch

•• Powerful 15.0 AMP motor delivers 6,000 RPM for the most
challenging applications

•• Enlarged all ball bearing construction for longer tool life
•• Spiral bevel gears for smoother rotations and a more

efficient transfer of energy
•• Zig-zag varnish protects the armature coil from dust and

debris for longer motor life
•• AC/DC switch for use with alternative power source
•• Externally accessible brushes for easy serviceability

XAG12PT1 18V X2 LXT® Lithium‑Ion (36V) Brushless Cordless 7” Paddle Switch
Cut‑Off/Angle Grinder Kit, with Electric Brake (5.0Ah)

•• Wheel Diameter : 7” •• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor
•• Battery : 2X 18V LXT® Lithium-Ion to run cooler and more efficiently for longer life; delivers 7,800 RPM
•• No Load Speed : 7,800 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Two 18V LXT® Lithium-Ion batteries deliver corded power without leaving the
•• Lock-On : No 18V LXT® battery platform
•• Lock-Off : Yes
•• Switch Type : Rear trigger handle •• Electric brake stops the grinding or cut-off wheel in 4.5 seconds or less for
•• Electric Brake : Yes maximum productivity
•• Variable speed control dial : No
•• Max. Cutting Depth : 1-7/8” •• Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of
•• Overall Length : 19-5/8” the wheel is suddenly forced to stop
•• Net Weight (with battery) : 11.4 lbs.
•• Power Type : Cordless •• Automatic Speed Change™ technology adjusts speed and torque during
•• Vibration – Surface Grinding (m/s²) : 7.5 operation for optimum performance
•• Shipping Weight : 29.768 lbs.
•• UPC Code : 088381-849746 •• Vibration absorbing back handle is isolated from the motor housing effectively
reducing vibration to the operator’s hands

•• Rear handle paddle switch with no lock-on feature
•• Efficient BL™ Brushless motor is electronically controlled to optimize battery

energy use for up to 50% longer run time per charge
•• The electronically-controlled BL™ Brushless Motor efficiently uses energy to

match torque and RPM to the changing demands of the application
•• Soft start suppresses start-up reaction for smooth start-ups and longer

gear life

178 HPIONLINE®.COM

TOOLS: GRINDERS

GA9060 9” Angle Grinder, with Lock‑On Switch TOOLS: GRINDERS

•• Wheel Diameter : 9” •• Rear handle trigger switch with lock-on feature; lock-off feature requires two
•• AMPS : 15 actions to start the grinder
•• No Load Speed : 6,600 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Redesigned motor with greater armature stability and larger commutator bars
•• Lock-On : No for 3 times longer life compared to previous model
•• Lock-Off : Yes
•• Switch Type : Rear trigger handle •• Zig-zag epoxy on both sides of the armature coil and a powder-coated field for
•• Overall Length : 17-3/4” added protection from dust and debris for longer motor life
•• Net Weight : 12.1 lbs.
•• Variable speed control dial : No •• Labyrinth construction seals and protects the motor and bearings from dust
•• Power Type : Corded and debris for longer tool life
•• Shipping Weight : 15.4 lbs.
•• UPC Code : 088381-809962 •• Spiral bevel gears for smoother rotations and a more efficient transfer of
energy
GA9031Y
•• Aluminum gear housing provides superior gear alignment and smoother
•• Wheel Diameter : 9” transmission for increased durability
•• AMPS : 15
•• No Load Speed : 6,600 RPM •• AC/DC switch for use with alternative power source
•• Spindle Thread : 5/8” - 11 UNC •• Side handle installs in three locations for operator comfort in various
•• Lock-On : No
•• Lock-Off : Yes applications
•• Switch Type : Rear trigger switch •• Large spindle lock button for easier wheel changes while wearing gloves
•• Overall Length : 19-7/8” •• Brush spiral spring allows for a 30% larger brush and increased air-flow
•• Net Weight : 14 lbs.
•• Variable speed control dial : No compared to previous model
•• Power Type : Corded
•• Shipping Weight : 18 lbs. 9” Angle Grinder, with AC/DC Switch
•• UPC Code : 088381-604260
•• Powerful 15.0 AMP motor delivers 6,600 RPM for faster material
GA9040S removal

•• Wheel Diameter : 9” •• Spiral bevel gears for smoother rotations and a more efficient
•• AMPS : 15 transfer of energy
•• No Load Speed : 6,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Labyrinth construction prevents debris from penetrating the
•• Lock-On : Yes motor, bearings and gears for longer tool life
•• Lock-Off : No
•• Switch Type : Rear trigger handle •• Zig-zag varnish protects the armature coil from dust and debris
•• Overall Length : 20-1/8” for longer motor life
•• Net Weight : 14.8 lbs.
•• Variable speed control dial : No •• Wire mesh intake covers are engineered to prevent debris from
•• Power Type : Corded entering motor especially when used in close proximity to other
•• Shipping Weight : 19.9 lbs. grinders
•• UPC Code : 088381-073455
•• Three position vibration absorbing side handle for increased
GS5000 comfort

•• Max. Wheel Diameter : 5” •• Rotatable back handle for increased comfort in various
•• AMPS : 7 applications
•• No Load Speed : 5,600 RPM
•• Spindle Thread : 5/8” x 24 UNC •• Large rubber tool rest to help protect tool and surfaces from
•• Lock-On : No damage
•• Lock-Off : Yes
•• Overall Length : 23-1/4” •• AC/DC switch for use with alternative power source
•• Net Weight : 11.1 lbs. •• “Tool-less” wheel guard for more convenient adjustments
•• Power Type : Corded
•• Variable speed control dial : No 9” Angle Grinder
•• Shipping Weight : 14.45 lbs.
•• UPC Code : 088381-642255 •• Powerful 15.0 AMP motor delivers 6,000 RPM for faster
material removal

•• Soft start suppresses start-up reaction for smooth start-ups
and longer gear life

•• Rotatable back handle for increased comfort in various
orientations

•• “Tool-less” wheel guard for more convenient
adjustments

•• Three position vibration absorbing side handle for increased
comfort

•• Spiral bevel gears for smoother rotations and a more
efficient transfer of energy

•• Labyrinth construction prevents debris from penetrating the
motor, bearings and gears for longer tool life

•• Zig-zag varnish protects the armature coil from dust and
debris for longer motor life

•• Large rubber tool rest to help protect tool and surfaces from
damage

•• Externally accessible brushes for easy serviceability

5” Straight Grinder

•• Rubberized handle for increased operator comfort
•• “Tool-less” guard cap removal for more convenient wheel

changes
•• Spiral bevel gears for smoother rotations and a more efficient

transfer of energy
•• Externally accessible brushes for easier serviceability
•• Zig-zag varnish protects the armature coil by deflecting dust and

debris for longer motor life
•• Labyrinth construction helps prevent dust and debris from

penetrating the main bearing or gear box
•• Spring loaded sealed drive bearing is engineered to help prevent

dust and debris from penetrating drive bearing
•• Rubberized gear housing for increased operator comfort
•• Larger cooling fan and blades pull more air through the motor to

help maintain lower operating temperature
•• Ideal for metal fabrication and pipe welders

1-800-778-2217 179

TOOLS: GRINDERS

GD0801C 1/4” SJS™ Paddle Switch Die Grinder

•• Max. Wheel Diameter : 1” •• Powerful 6.6 AMP motor delivers 7,000-29,000 RPM for faster material
•• AMPS : 6.6 removal
•• Collet : 1/4”
•• No Load Speed (variable speed) : 7,000 - 29,000 RPM •• SJS™ technology is a mechanical clutch system that helps prevent motor and
•• Lock-On : No gear damage by allowing the drive shaft to slip if the wheel is forced to stop
•• Lock-Off : Yes
•• Overall Length : 14-3/8” •• Variable speed control dial enables user to match the speed to the
•• Net Weight : 4.2 lbs. application
•• Variable speed control dial : Yes
•• Power Type : Corded •• Constant speed control automatically applies additional power to the motor to
•• Shipping Weight : 7 lbs. maintain speed under load
•• UPC Code : 088381-682459
•• Soft start suppresses start-up reaction for smooth start-ups and longer gear
life

•• Electronic current limiter helps protect the motor from overload
•• Directional air-flow vents channel air output away from the operator
•• Labyrinth construction prevents debris from penetrating the motor, bearings

and gears for longer tool life
•• Zig-zag varnish protects the armature coil from dust and debris for longer

motor life
•• Large flush-mount paddle switch for easy operation

GD0800C 1/4” SJS™ Die Grinder

•• Max. Wheel Diameter : 1” •• Powerful 6.6 AMP motor delivers 7,000-28,000 RPM for faster
•• AMPS : 6.6 •• pmSrJaeStve™erniattelmcrheomntooorlvoaagnlydisgeaamr deachmaangiceabl yclaultlcohwsiynsgtethme tdhraivt eheslhpasft to slip
•• Collet : 1/4” •• Viafpatrphilaeicbwalethiosepneel eisdfocorcnetdrotlodsiatol penables user to match the speed to the
TOOLS: GRINDERS •• No Load Speed (variable speed) : 7,000 - 28,000 RPM •• StChooefntmsstaotantrottrsstpuoepmepdraecisnostnaetisrnossltapareute-tuodpmuranetdaicecartillloyonaadfpoprlsiemsoaodtdhitsiotanrat-lupposwaenrdto
•• Lock-On : Yes ••
•• Lock-Off : No •• lEoolvenecgrtelroroangdiecacrulirfreent limiter helps protect the motor from
•• Overall Length : 14-5/8” •• DtLhaierbeyucrstiienortn’hsacflaoacniers-ftlrouwctivoennptsrecvheanntnsedl ethberistoforol’ms apireonuettprauttinagwtahyefrom
•• Net Weight : 3.7 lbs. ••
•• Variable speed control dial : Yes •• fZmoigro-tlzooarn,ggbeveraarmrniniosgthosrpalrniofdetegcetsartshefoarrlmonagtuerretocooilllfirfeom dust and debris
•• Power Type : Corded
•• Shipping Weight : 5.6 lbs.
•• UPC Code : 088381-034579

•• Overall length: 14-5/8”

GD0601 1/4” Die Grinder, with AC/DC Switch

•• Max. Wheel Diameter : 1-1/2” •• Powerful 3.5 AMP motor delivers 25,000 RPM to handle
•• AMPS : 3.5 the most challenging applications
•• Collet : 1/4”
•• No Load Speed : 25,000 RPM •• Lower noise at 73dB(A)
•• Lock-On : Yes •• Small diameter barrel grip for added comfort
•• Lock-Off : No •• Directional air-flow vents channel the tool’s air output
•• Overall Length : 14-1/8”
•• Net Weight : 3.7 lbs. away from the user’s face
•• Variable speed control dial : No •• Round-shaped collet nut is engineered to prevent
•• Power Type : Corded
•• Shipping Weight : 6.6 lbs. damages/scratches to workpiece
•• UPC Code : 088381-078696 •• Zig-zag varnish protects the armature coil from dust and

debris for longer motor life
•• AC/DC switch for use with alternative power source
•• Slide switch with lock-on for operator convenience
•• Rubberized gear housing for increased operator

comfort
•• Stepped neck for working in tights spaces

GD0603 1/4” Compact Die Grinder

•• Max. Wheel Diameter : 3/4” •• Powerful 2.2 AMP motor delivers 28,000 RPM to handle unique applications
•• AMPS : 2.2 •• Compact design with small 2-1/2” diameter barrel; weighs only 2.1 lbs. for
•• Collet : 1/4”
•• No Load Speed : 28,000 RPM added comfort
•• Lock-On : Yes •• Contoured neck grip provides a secondary hand position for increased
•• Lock-Off : No
•• Overall Length : 11-3/8” maneuverability
•• Net Weight : 2.1 lbs. •• Round-shaped collet nut is designed to help prevent damage/scratches to
•• Power Type : Corded
•• Shipping Weight : 4 lbs. workpiece
•• UPC Code : 088381-801072 •• Powder coated field protects the motor from dust and debris for longer tool

life
•• Directional air-flow vents channel air output away from the operator’s face
•• Lower noise at 76 dB(A)
•• Rocker switch with lock-on for operator convenience
•• Metal hanging hook for added convenience
•• Long 8’ cord for increased mobility

180 HPIONLINE®.COM

TOOLS: GRINDERS

XDG01T 18V LXT® Lithium‑Ion Cordless 1/4” Die Grinder Kit (5.0Ah)

•• Max. Wheel Diameter : 1-1/2” •• Compact barrel grip design and weighs only 4.4 lbs. for easy handling
•• Battery : 18V LXT® Lithium-Ion •• Slide switch with lock-on for operator convenience
•• Collet : 1/4” •• Vent slots designed to direct exhaust air away from the user
•• No Load Speed : 25,000 RPM •• L.E.D. light flashes red when it is time to recharge the battery
•• Lock-On : Yes •• Built-in L.E.D. protection circuit with over-torque control protects the motor
•• Lock-Off : No •• Solid aluminum housing for added durability
•• Overall Length : 15-3/4” •• Round-shaped collet nut reduces the possibility of damage
•• Net Weight (with battery) : 4.4 lbs. •• Stepped neck for working in tights spaces
•• Variable speed control dial : No •• 18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D.
•• Power Type : Cordless
•• Shipping Weight : 12.6 lbs. battery charge level indicator
•• UPC Code : 088381-834162 •• 18V LXT® Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run

time per charge*

GA5042CX1 5” SJS™II High‑Power Angle Grinder with Cutting/Tuck Point Guard

•• (1) Lock Nut (224568-4) SPECS •• Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) TOOLS: GRINDERS
•• Wheel Diameter : 5” RPM
•• AMPS : 12
•• No Load Speed (variable speed) : 2,800 - 11,000 RPM •• SJS™II provides a leaf spring and cam gear drive mechanism that is
•• Max. Cutting Depth : 1” engineered to reduce vibration for increased operator comfort during extended
•• Spindle Thread : 5/8” - 11 UNC use
•• Lock-On : Yes
•• Lock-Off : No •• Includes a 5” dust extraction guard for clean and accurate tuck pointing and
•• Switch Type : Body grip/slide cutting applications
•• Overall Length : 11-7/8”
•• Net Weight : 5.4 lbs. •• Guard offers a durable, high quality metal construction
•• Variable speed control dial : Yes •• Plunge feature allows for maximum material removal and up to 1” cutting
•• Power Type : Corded
•• Shipping Weight : 13 lbs. depth when used with a 5” blade
•• UPC Code : 088381-698788 •• Guard provides easily adjustable depth stop and depth setting for added user

convenience
•• Guard offers a clear viewing window for improved visibility
•• Side handle can be installed in various locations on the tuck point guard for

operator comfort
•• Electronic Controller provides constant speed control which automatically

applies additional power to the motor to maintain speed under load
•• Electronic Controller provides soft start which is designed to suppress start-up

reaction for smooth start-ups and longer gear life

GA5040X1 5” SJS™II Angle Grinder with Cutting/Tuck Point Guard

•• Wheel Diameter : 5” •• Powerful 10.0 AMP motor delivers more output and 11,000
•• AMPS : 10 RPM
•• No Load Speed : 11,000 RPM
•• Max. Cutting Depth : 1” •• SJS™II provides a leaf spring and cam gear drive
•• Spindle Thread : 5/8” - 11 UNC mechanism that is engineered to reduce vibration for
•• Lock-On : Yes increased operator comfort during extended use
•• Lock-Off : No
•• Switch Type : Body grip/slide •• Includes 5” dust extraction guard for clean and accurate tuck
•• Overall Length : 11-7/8” pointing or cutting applications
•• Net Weight : 5.4 lbs.
•• Accessories Included : Yes •• Guard offers a durable, high quality metal construction
•• Variable speed control dial : No •• Plunge feature allows for maximum material removal and
•• Power Type : Corded
•• Shipping Weight : 12 lbs. up to 1” cutting depth when used with a 5” blade
•• UPC Code : 088381-698290 •• Guard provides easily adjustable depth stop and depth

GA4030K setting for added user convenience
•• Guard features a clear viewing window for improved
•• Wheel Diameter : 4”
•• AMPS : 6 visibility
•• No Load Speed : 11,000 RPM •• Side handle can be installed in various locations on the
•• Spindle Thread : M10 x 1.25
•• Lock-On : Yes guard for operator comfort
•• Lock-Off : No •• Spiral bevel gears for smoother rotations and a more
•• Switch Type : Body grip/slide
•• Overall Length : 10-1/2” efficient transfer of energy
•• Net Weight : 4 lbs. •• Labyrinth construction seals and protects the motor and
•• Variable speed control dial : No
•• Electric Brake : No bearings from dust and debris for longer tool life
•• Power Type : Corded
•• Shipping Weight : 8.1 lbs. 4” Angle Grinder, with tool case
•• UPC Code : 088381-096874
•• Powerful 6.0 AMP motor delivers 11,000 RPM for the most
demanding applications

•• Compact design at only 3.7 lbs. for reduced operator fatigue
•• Labyrinth construction seals and protects the motor and bearings

from dust and debris for longer tool life
•• Slide switch design with lock-on
•• All-ball bearing design and metal gear housing for added

durability
•• Small diameter barrel grip (only 2-1/4”) for added comfort
•• Externally accessible brushes for greater serviceability
•• Protective zig-zag varnish seals the armature from dust and debris

for longer tool life
•• Machined bevel gears provide up to 2x longer service life than

previous models
•• Side handle is positioned at an increased 20° angle for added

comfort and control

1-800-778-2217 181

TOOLS: GRINDERS

9557NB 4‑1/2” Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 4-1/2” •• Powerfull 7.5 AMP motor delivers 11,000 RPM for high output
•• AMPS : 7.5 power
•• No Load Speed : 11,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Compact design with small 2-1/2” diameter barrel and weighs
•• Lock-On : Yes only 4.5 lbs. for added comfort
•• Lock-Off : No
•• Switch Type : Body grip/slide •• Protective zig-zag varnish seals the armature from dust and debris
•• Overall Length : 10-5/8” for longer tool life
•• Net Weight : 4.5 lbs.
•• Variable speed control dial : No •• Labyrinth construction seals and protects the drive gear and
•• Power Type : Corded bearings from contamination for longer tool life
•• Shipping Weight : 6.28 lbs.
•• UPC Code : 088381-062442 •• AC/DC switch for use with alternative power source
•• Thicker coil wires are wound more closely to reduce heat and

energy loss
•• All-ball bearing design and metal gear housing for durability
•• Slide switch with lock-on for continuous use
•• Side handle can be positioned on both sides for operator

convenience
•• Push button spindle lock for operator convenience

9564CV 4‑1/2” SJS™ High‑Power Angle Grinder

TOOLS: GRINDERS •• Wheel Diameter : 4-1/2” •• Powerful 13 AMP motor delivers more output and variable (2,800
•• AMPS : 13 - 10,500) RPM
•• No Load Speed (variable speed) : 2,800 - 10,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : Yes prevent motor and gear damage by allowing the drive shaft to slip
•• Lock-Off : No if the wheel is forced to stop
•• Switch Type : Body grip/slide
•• Overall Length : 11-3/4” •• Variable speed control dial enables user to match the speed to the
•• Net Weight : 5.3 lbs. application
•• Variable speed control dial : Yes
•• Power Type : Corded •• Constant speed control automatically applies additional power to
•• Shipping Weight : 7.3 lbs. the motor to maintain speed under load
•• UPC Code : 088381-037242
•• Soft start suppresses start-up reaction for smooth start-ups and
longer gear life

•• Electronic current limiter helps protect the motor from
overload

•• Labyrinth construction seals and protects the motor and bearings
from dust and debris for longer tool life

•• Spiral bevel gears for smoother rotations and a more efficient
transfer of energy

•• Slide switch with lock-on setting for continuous use
•• “Tool-less” wheel guard for more convenient adjustments

GA4534 4‑1/2” Paddle Switch Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 4-1/2” •• Powerful 6.0 AMP motor delivers 11,000 RPM for the most
•• AMPS : 6 demanding applications
•• No Load Speed : 11,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Compact design at only 4.2 lbs. for reduced operator fatigue
•• Lock-On : No •• Labyrinth construction seals and protects the motor and bearings
•• Lock-Off : Yes
•• Switch Type : Body grip/paddle from dust and debris for longer tool life
•• Overall Length : 10-3/8” •• Paddle switch design with no lock-on for added user
•• Net Weight : 4.2 lbs.
•• Variable speed control dial : No preference
•• Electric Brake : No •• AC/DC switch for use with alternative power source
•• Power Type : Corded •• Protective zig-zag varnish seals the armature from dust and
•• Shipping Weight : 6.05 lbs.
•• UPC Code : 088381-606196 debris for longer tool life
•• All-ball bearing design and metal gear housing for added

durability
•• Machined bevel gears provide up to 2x longer service life than

previous models
•• Side handle is positioned at an increased 20° angle for added

comfort and control
•• Includes grinding wheel, guard, inner flange, lock- nut, wrench

and side handle

9557PBX1 4‑1/2” Paddle Switch Cut‑Off/Angle Grinder

•• Wire Cup Brush : 3-1/2” •• Powerful 7.5 AMP motor delivers 11,000 RPM for high output
•• No Load Speed : 11,000 RPM power
•• Spindle Thread : 5/8” - 11 UNC
•• AMPS : 7.5 •• Small diameter barrel grip (only 2-1/2”) for added comfort
•• Lock-On : Yes •• Labyrinth construction seals and protects the motor and bearings
•• Lock-Off : Yes
•• Overall Length : 10-3/4” from dust and debris for longer tool life
•• Net Weight : 4.5 lbs. •• Lock-on/off feature for continuous operation
•• Variable speed control dial : No •• AC/DC switch for use with alternative power source
•• Power Type : Corded •• Protective zig-zig varnish seals the armature from dust and debris
•• Shipping Weight : 12 lbs.
•• UPC Code : 088381-085847 for longer tool life
•• Extra large paddle switch for comfortable operation
•• Thicker coil wires are wound more closely to reduce heat and

energy loss
•• All-ball bearing design and metal gear housing for durability
•• Rotatable gear housing can be positioned every 90°

182 HPIONLINE®.COM

TOOLS: GRINDERS

9564P 4‑1/2” SJS™ Paddle Switch Angle Grinder TOOLS: GRINDERS

•• Wheel Diameter : 4-1/2” •• Powerful 10.0 AMP motor delivers more output and 10,500 RPM for the most
•• AMPS : 10 demanding applications
•• No Load Speed : 10,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps prevent motor and
•• Lock-On : No gear damage by allowing the drive shaft to slip if the wheel is forced to stop
•• Lock-Off : Yes
•• Switch Type : Body grip/paddle •• Larger cooling fan and blades pull more air through the motor to help maintain
•• Overall Length : 12-1/8” lower operating temperature
•• Net Weight : 5.1 lbs.
•• Variable speed control dial : No •• Large flush-mount paddle switch with integrated lock-off tab for more
•• Power Type : Corded comfortable operation
•• Shipping Weight : 6.5 lbs.
•• UPC Code : 088381-638432 •• Labyrinth construction prevents debris from penetrating the motor, bearings
and gears for longer tool life
9564PC
•• “Clam-shell” gear box design for greater durability and easier servicing.
•• Wheel Diameter : 4-1/2” •• Spiral bevel gears for smoother rotations and a more efficient transfer of
•• AMPS : 13
•• No Load Speed : 10,500 RPM energy
•• Spindle Thread : 5/8” - 11 UNC •• Zig-zag varnish protects the armature coil from dust and debris for longer
•• Lock-On : No
•• Lock-Off : Yes motor life
•• Switch Type : Body grip/paddle •• Spring loaded metal sealed drive bearing is engineered to prevent dust and
•• Overall Length : 12-1/8”
•• Net Weight : 5.3 lbs. debris from penetrating drive bearing
•• Variable speed control dial : No •• “Tool-less” wheel guard for more convenient adjustments
•• Power Type : Corded
•• Shipping Weight : 7.2 lbs. 4‑1/2” SJS™ High‑Power Paddle Switch Angle Grinder
•• UPC Code : 088381-085144
•• Powerful 13.0 AMP motor delivers more output and 10,500 RPM
for the most demanding applications

•• SJS™ technology is a mechanical clutch system that helps
prevent motor and gear damage by allowing the drive shaft to slip
if the wheel is forced to stop

•• Constant speed control automatically applies additional power to
the motor to maintain speed under load

•• Soft start suppresses start-up reaction for smooth start-ups and
longer gear life

•• Electronic current limiter helps protect the motor from
overload

•• Labyrinth construction seals and protects the motor and bearings
from dust and debris for longer tool life

•• Large paddle switch with lock-off for comfortable operation
•• “Tool-less” wheel guard adjustment for easy adjustment
•• Two position adjustable side handle for operator covenience
•• Compact design at only 12-1/8” long and weighs only 5.3 lbs.

GA5042CX1 5” SJS™II High‑Power Angle Grinder with Cutting/Tuck Point Guard

•• Wheel Diameter : 5” •• Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000)
•• AMPS : 12 RPM
•• No Load Speed (variable speed) : 2,800 - 11,000
•• SJS™II provides a leaf spring and cam gear drive mechanism that is
RPM engineered to reduce vibration for increased operator comfort during
•• Max. Cutting Depth : 1” extended use
•• Spindle Thread : 5/8” - 11 UNC
•• Lock-On : Yes •• Includes a 5” dust extraction guard for clean and accurate tuck pointing and
•• Lock-Off : No cutting applications
•• Switch Type : Body grip/slide
•• Overall Length : 11-7/8” •• Guard offers a durable, high quality metal construction
•• Net Weight : 5.4 lbs. •• Plunge feature allows for maximum material removal and up to 1” cutting
•• Variable speed control dial : Yes
•• Power Type : Corded depth when used with a 5” blade
•• Shipping Weight : 13 lbs. •• Guard provides easily adjustable depth stop and depth setting for added user
•• UPC Code : 088381-698788
convenience
•• Guard offers a clear viewing window for improved visibility
•• Side handle can be installed in various locations on the tuck point guard for

operator comfort
•• Electronic Controller provides constant speed control which automatically

applies additional power to the motor to maintain speed under load
•• Electronic Controller provides soft start which is designed to suppress start-up

reaction for smooth start-ups and longer gear life

9558PB 5” Paddle Switch Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 5” •• Powerful 7.5 AMP motor delivers 10,000 RPM for high output
•• AMPS : 7.5 power
•• No Load Speed : 10,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Compact design with small 2-1/2” diameter barrel grip; weighs
•• Lock-On : No only 4.6 lbs. for added comfort
•• Lock-Off : Yes
•• Switch Type : Body grip/paddle •• Labyrinth construction seals and protects the drive gear and
•• Overall Length : 10-3/4” bearings from contamination for longer tool life
•• Net Weight : 4.6 lbs.
•• Variable speed control dial : No •• AC/DC switch for use with alternative power source
•• Power Type : Corded •• Protective zig-zig varnish seals the armature from dust and debris
•• Shipping Weight : 6.62 lbs.
•• UPC Code : 088381-063920 for longer tool life
•• Large paddle switch for comfortable operation
•• Thicker coil wires are wound more closely to reduce heat and

energy loss
•• All-ball bearing design and metal gear housing for durability
•• Side handle for increased comfort
•• Push button spindle lock for operator convenience

1-800-778-2217 183

TOOLS: GRINDERS

9565PCV 5” SJS™ High‑Power Paddle Switch Angle Grinder

•• Wheel Diameter : 5” •• Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500)
•• AMPS : 13 RPM for the most demanding applications
•• No Load Speed (variable speed) : 2,800 - 10,500
•• SJS™ technology is a mechanical clutch system that helps prevent motor and
RPM gear damage by allowing the drive shaft to slip if the wheel is forced to stop
•• Spindle Thread : 5/8” - 11 UNC
•• Lock-On : No •• Variable speed control dial enables user to match the speed to the
•• Lock-Off : Yes application
•• Switch Type : Body grip/paddle
•• Overall Length : 12-1/8” •• Electronic controller provides constant speed control which automatically
•• Net Weight : 4.2 lbs. applies additional power to the motor to maintain speed under load
•• Variable speed control dial : Yes
•• Power Type : Corded •• Electronic controller provides soft-start which is designed to suppress start-up
•• Shipping Weight : 7.3 lbs. reaction for smooth start-ups and longer gear life
•• UPC Code : 088381-085175
•• Electronic controller provides an electronic current limiter which helps protect
the motor from overload in high torque applications

•• Labyrinth construction seals and protects the motor and bearings from dust
and debris for longer tool life

•• Refined design at only 5.3 lbs. for reduced operator fatigue
•• Large paddle switch with lock-off for comfortable operation
•• “Tool-less” wheel guard adjustment for easy adjustment

TOOLS: GRINDERS 9565PC 5” SJS™ High‑Power Paddle Switch Angle Grinder

•• Wheel Diameter : 5” •• Powerful 13.0 AMP motor delivers more output and 10,500 RPM
•• AMPS : 13 for the most demanding applications
•• No Load Speed : 10,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : No prevent motor and gear damage by allowing the drive shaft to slip
•• Lock-Off : Yes if the wheel is forced to stop
•• Switch Type : Body grip/paddle
•• Overall Length : 12-1/8” •• Constant speed control automatically applies additional power to
•• Net Weight : 5.3 lbs. the motor to maintain speed under load
•• Variable speed control dial : No
•• Power Type : Corded •• Electronic current limiter helps protect the motor from
•• Shipping Weight : 7.2 lbs. overload
•• UPC Code : 088381-085168
•• Soft start suppresses start-up reaction for smooth start-ups and
9005BZ longer gear life

•• Wheel Diameter : 5” •• Labyrinth construction seals and protects the motor and bearings
•• AMPS : 9 from dust and debris for longer tool life
•• No Load Speed : 12,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Large no lock-on paddle switch with lock-off for comfortable
•• Lock-On : No operation
•• Lock-Off : No
•• Switch Type : Rear trigger switch •• “Tool-less” wheel guard adjustment for easy adjustment
•• Overall Length : 14” •• Two position adjustable side handle for operator covenience
•• Net Weight : 6.6 lbs. •• Compact design at only 12-1/8” long and weighs only 5.3 lbs.
•• Variable speed control dial : No
•• Power Type : Corded 5” Angle Grinder, with AC/DC Switch
•• Shipping Weight : 7 lbs.
•• UPC Code : 088381-035132 •• Lightweight (6.6 lbs.) for high production work with less
fatigue

•• Powerful 9.0 AMP motor
•• Side handle can be installed on either side of the tool
•• Spindle lock for easy wheel changes
•• All ball bearing construction for longer tool life
•• Zig-zag varnish protects the armature coil from dust and debris

for longer motor life
•• Standard 5/8” x 11 UNC spindle
•• AC/DC switch for use with alternative power source
•• Double insulated
•• No lock-on feature for operator convenience

GA5020 5” SJS™ Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 5” •• Powerful 10.5 AMP motor delivers 11,000 RPM to handle the most
•• AMPS : 10.5 demanding applications
•• No Load Speed : 11,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : No prevent motor and gear damage by allowing the drive shaft to slip
•• Lock-Off : No if the wheel is forced to stop
•• Switch Type : Rear trigger switch
•• Overall Length : 14” •• Electric brake for maximum productivity
•• Net Weight : 5.9 lbs. •• No lock-on feature for more convenience
•• Variable speed control dial : No •• “Tool-less” wheel guard for more convenient adjustments
•• Power Type : Corded •• Spiral bevel gears for smoother rotations and a more efficient
•• Shipping Weight : 8.8 lbs.
•• UPC Code : 088381-083249 transfer of energy
•• Zig-zag varnish protects the armature coil from dust and debris
184
for longer motor life
•• Labyrinth construction prevents debris from penetrating the

motor, bearings and gears for longer tool life
•• Externally accessible brushes for greater serviceability
•• AC/DC switch for use with alternative power source

HPIONLINE®.COM

TOOLS: GRINDERS

GA5020Y 5” SJS™ Angle Grinder, with AC/DC Switch TOOLS: GRINDERS

•• Wheel Diameter : 5” •• Powerful 10.5 AMP motor delivers 11,000 RPM to handle the most
•• AMPS : 10.5 demanding applications
•• No Load Speed : 11,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : No prevent motor and gear damage by allowing the drive shaft to slip
•• Lock-Off : Yes if the wheel is forced to stop
•• Switch Type : Rear trigger switch
•• Overall Length : 14” •• Electric brake for maximum productivity
•• Net Weight : 5.9 lbs. •• “Tool-less” wheel guard for more convenient adjustments
•• Variable speed control dial : No •• Spiral bevel gears for smoother rotations and a more efficient
•• Power Type : Corded
•• Shipping Weight : 7.9 lbs. transfer of energy
•• UPC Code : 088381-084758 •• Zig-zag varnish protects the armature coil from dust and debris

GA5010Z for longer motor life
•• Labyrinth construction prevents debris from penetrating the
•• Wheel Diameter : 5”
•• AMPS : 10.5 motor, bearings and gears for longer tool life
•• No Load Speed : 11,000 RPM •• Externally accessible brushes for greater serviceability
•• Spindle Thread : 5/8” - 11 UNC •• AC/DC switch for use with alternative power source
•• Lock-On : No •• No lock-on feature for more convenience
•• Lock-Off : No
•• Switch Type : Rear trigger switch 5” Angle Grinder, with AC/DC Switch
•• Overall Length : 14”
•• Net Weight : 5.8 lbs. •• Powerful 10.5 AMP motor delivers more output for
•• Variable speed control dial : No increased performance
•• Power Type : Corded
•• Shipping Weight : 8.8 lbs. •• Refined design at only 5.8 lbs. for reduced operator
•• UPC Code : 088381-081801 fatigue

•• AC/DC switch for use with alternative power source
•• Labyrinth construction seals and protects the motor and

bearings from dust and debris for longer tool life
•• Externally accessible brushes for greater serviceability
•• Rotatable gear housing can be positioned every 90°
•• Ergonomic soft grip provides increased comfort on the

job
•• “Rat Tail” back handle for increased comfort
•• No lock-on feature for more convenience
•• Ideal for welders, fabricators, masons, maintenance/

repair and more

9566PCX1 6” SJS™ High‑Power Paddle Switch Cut‑Off/Angle Grinder

•• No Load Speed : 9,000 RPM •• Powerful 13.0 AMP motor delivers more output and 9,000 RPM for the most
•• Spindle Thread : 5/8” - 11 UNC demanding applications
•• AMPS : 13
•• Lock-On : No •• SJS™ technology is a mechanical clutch system that helps prevent motor
•• Lock-Off : Yes and gear damage by allowing the drive shaft to slip if the wheel is forced to
•• Overall Length : 12-1/8” stop
•• Net Weight : 5.5 lbs.
•• Wheel Diameter : 6” •• Constant speed control automatically applies additional power to the motor to
•• Switch Type : Body grip/paddle maintain speed under load
•• Variable speed control dial : No
•• Power Type : Corded •• Soft start suppresses start-up reaction for smooth start-ups and longer gear
•• Shipping Weight : 9.5 lbs. life
•• UPC Code : 088381-680523
•• Electronic current limiter helps protect the motor from overload
•• Labyrinth construction seals and protects the motor and bearings from dust

and debris for longer tool life
•• Large no-lock on paddle switch with lock-off for comfortable operation
•• Spiral bevel gears for less vibration and a more efficient transfer of power
•• Two position adjustable side handle for operator covenience
•• “Tool-less” grinding wheel guard for more convenient adjustments

GA7011C 7” Angle Grinder

•• Wheel Diameter : 7” •• Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500)
•• AMPS : 15 RPM for the most demanding applications
•• No Load Speed : 6,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps prevent motor and
•• Lock-On : Yes gear damage by allowing the drive shaft to slip if the wheel is forced to stop
•• Lock-Off : Yes
•• Switch Type : Rear trigger handle •• Variable speed control dial enables user to match the speed to the
•• Overall Length : 17-7/8” application
•• Net Weight : 7.5 lbs.
•• Variable speed control dial : No •• Electronic controller provides constant speed control which automatically
•• Power Type : Corded applies additional power to the motor to maintain speed under load
•• Shipping Weight : 11.91 lbs.
•• UPC Code : 088381-055680 •• Electronic controller provides soft-start which is designed to suppress start-up
reaction for smooth start-ups and longer gear life
185
•• Electronic controller provides an electronic current limiter which helps protect
the motor from overload in high torque applications

•• Labyrinth construction seals and protects the motor and bearings from dust
and debris for longer tool life

•• Refined design at only 5.3 lbs. for reduced operator fatigue
•• Large paddle switch with lock-off for comfortable operation
•• “Tool-less” wheel guard adjustment for easy adjustment

1-800-778-2217

TOOLS: GRINDERS

GA7021 7” Angle Grinder, with AC/DC Switch

•• Wheel Diameter : 7” •• Spiral bevel gears for smoother rotations and a more efficient
•• AMPS : 15 transfer of energy
•• No Load Speed : 6,600 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Labyrinth construction prevents debris from penetrating the
•• Lock-On : Yes motor, bearings and gears for longer tool life
•• Lock-Off : No
•• Switch Type : Rear trigger handle •• Zig-zag varnish protects the armature coil from dust and debris
•• Overall Length : 18-5/8” for longer motor life
•• Net Weight : 12.2 lbs.
•• Variable speed control dial : No •• Large rubber tool rest protects work piece from damage
•• Power Type : Corded •• AC/DC switch for use with alternative power source
•• Shipping Weight : 15.4 lbs. •• Rubberized back handle for increased operator comfort
•• UPC Code : 088381-070768 •• Externally accessible brushes for easy serviceability
•• Three position adjustable side handle for operator covenience
•• “Tool-less” wheel guard for more convenient adjustments
•• Includes 7” grinding wheel and guard

TOOLS: GRINDERS GA7040S 7” Angle Grinder

•• Wheel Diameter : 7” •• Powerful 15.0 AMP motor delivers 8,000 RPM for faster material
•• AMPS : 15 removal
•• No Load Speed : 8,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Soft start suppresses start-up reaction for smooth start-ups and
•• Lock-On : Yes longer gear life
•• Lock-Off : No
•• Switch Type : Rear trigger handle •• Rotatable back handle for increased comfort in various
•• Overall Length : 20-1/8” applications
•• Net Weight : 14.2 lbs.
•• Variable speed control dial : No •• “Tool-less” wheel guard for more convenient adjustments
•• Power Type : Corded •• Three position vibration absorbing side handle for increased
•• Shipping Weight : 17.3 lbs.
•• UPC Code : 088381-073387 comfort
•• Spiral bevel gears for smoother rotations and a more efficient
GA4530X
transfer of energy
•• Wheel Diameter : 4-1/2” •• Labyrinth construction prevents debris from penetrating the
•• AMPS : 6
•• No Load Speed : 11,000 RPM motor, bearings and gears for longer tool life
•• Spindle Thread : 5/8” - 11 UNC •• Zig-zag varnish protects the armature coil from dust and debris
•• Lock-On : Yes
•• Lock-Off : No for longer motor life
•• Switch Type : Body grip/slide •• Large rubber tool rest to help protect tool and surfaces from
•• Overall Length : 10-1/2”
•• Net Weight : 4 lbs. damage
•• Variable speed control dial : No •• Externally accessible brushes for easy serviceability
•• Power Type : Corded
•• Shipping Weight : 6.28 lbs. 4‑1/2” Angle Grinder, with 5 Wheels
•• UPC Code : 088381-096997
•• Powerful 6.0 AMP motor delivers 11,000 RPM for the most
demanding applications

•• Compact design with small 2-1/4” diameter barrel and weighs
only 4 lbs. for added comfort

•• Labyrinth construction seals and protects the motor and bearings
from dust and debris for longer tool life

•• Slide switch design with lock-on for added user convenience
•• Protective zig-zag varnish seals the armature from dust and

debris for longer tool life
•• All-ball bearing design and metal gear housing for added

durability
•• Machined bevel gears provide up to 2x longer service life than

previous models
•• Side handle is positioned at an increased 20° angle for added

comfort
•• Side handle can be installed on either side of the tool
•• Double insulated

GA4542C 4‑1/2” SJS™II High‑Power Angle Grinder

•• Wheel Diameter : 4-1/2” •• Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000)
•• AMPS : 12 RPM
•• No Load Speed (variable speed) : 2,800 - 11,000
•• SJS™II provides a leaf spring and cam gear drive mechanism that is
RPM engineered to reduce vibration for increased operator comfort during extended
•• Spindle Thread : 5/8” - 11 UNC use
•• Lock-On : Yes
•• Lock-Off : No •• Vibration absorbing side handle provides increased comfort on the job
•• Switch Type : Body grip/slide •• Electronic controller provides constant speed control which automatically
•• Overall Length : 11-7/8”
•• Net Weight : 5.4 lbs. applies additional power to the motor to maintain speed under load
•• Variable speed control dial : Yes •• Electronic controller provides soft start which suppresses start-up reaction for
•• Power Type : Corded
•• Shipping Weight : 8 lbs. smooth start-ups and longer gear life
•• UPC Code : 088381-699761 •• Electronic controller provides an electronic current limiter which helps protect

the motor from overload in high torque applications
•• Variable speed control dial enables user to match the speed to the

application
•• Labyrinth construction seals and protects the drive gear and bearings from dust

and debris for increased durability
•• Motor fan is designed with enlarged fins for increased air flow and a cooler

running motor
•• Complete zig-zag epoxy is applied to both sides of the armature coil and a

powder coating to the field for protection from debris and longer tool life

186 HPIONLINE®.COM

TOOLS: GRINDERS

9565CV 5” SJS™ High‑Power Angle Grinder

•• Wheel Diameter : 5” •• Powerful 13.0 AMP motor delivers more output and variable
•• AMPS : 13 (2,800 - 10,500) RPM
•• No Load Speed (variable speed) : 2,800 - 10,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : Yes prevent motor and gear damage by allowing the drive shaft to slip
•• Lock-Off : No if the wheel is forced to stop
•• Switch Type : Body grip/slide
•• Overall Length : 11-3/4” •• Variable speed control dial enables user to match the speed to the
•• Net Weight : 4 lbs. application
•• Variable speed control dial : Yes
•• Power Type : Corded •• Constant speed control automatically applies additional power to
•• Shipping Weight : 7.4 lbs. the motor to maintain speed under load
•• UPC Code : 088381-033909
•• Soft start suppresses start-up reaction for smooth start-ups and
longer gear life

•• Electronic current limiter helps protect the motor from
overload

•• Labyrinth construction seals and protects the motor and bearings
from dust and debris for longer tool life

•• Slide switch with lock-on setting for continuous use
•• “Tool-less” wheel guard for easy adjustment
•• Zig-zag varnish protects the armature coil from dust and debris

for longer tool life

GA6020 6” SJS™ Angle Grinder, with AC/DC Switch TOOLS: GRINDERS AND HAMMERS

•• Wheel Diameter : 6” •• Powerful 10.5 AMP motor delivers 10,000 RPM to handle the
•• AMPS : 10.5 most demanding applications
•• No Load Speed : 10,000 RPM
•• Spindle Thread : 5/8” - 11 UNC •• SJS™ technology is a mechanical clutch system that helps
•• Lock-On : No prevent motor and gear damage by allowing the drive shaft to
•• Lock-Off : No slip if the wheel is forced to stop
•• Switch Type : Rear trigger switch
•• Overall Length : 14” •• Spiral bevel gears for smoother rotations and a more efficient
•• Net Weight : 6.7 lbs. transfer of energy
•• Variable speed control dial : No
•• Power Type : Corded •• Zig-zag varnish protects the armature coil from dust and debris
•• Shipping Weight : 8.75 lbs. for longer motor life
•• UPC Code : 088381-083263
•• “Tool-less” wheel guard for more convenient adjustments
•• Labyrinth construction prevents debris from penetrating the

motor, bearings and gears for longer tool life
•• Externally accessible brushes for greater serviceability
•• AC/DC switch for use with alternative power source
•• Rear handle and trigger design for more comfort during

extended use
•• Compact design at only 14” long

XAG04T 18V LXT® Lithium‑Ion Brushless Cordless 4‑1/2” / 5” Cut‑Off/Angle Grinder Kit (5.0Ah)

•• Wheel Diameter : 5” •• Automatic Speed Change™ technology adjusts speed and torque
•• Battery : 18V LXT® Lithium-Ion during operation for optimum performance
•• No Load Speed : 8,500 RPM
•• Spindle Thread : 5/8” - 11 UNC •• Active Feedback-sensing Technology (AFT®) turns the motor off
•• Lock-On Switch : Yes if rotation of the wheel is suddenly forced to stop
•• Lock-Off Switch : No
•• Switch Type : Body grip/slide •• The BL™ Brushless Motor eliminates carbon brushes, enabling
•• Overall Length : 14-1/4” the BL™ Motor to run cooler and more efficiently for longer
•• Net Weight (with battery) : 5.8 lbs. life
•• Variable speed control dial : No
•• Electric Brake : No •• Efficient BL™ Brushless motor is electronically controlled to
•• Power Type : Cordless optimize battery energy use for up to 50% longer run time per
•• Shipping Weight : 15.5 lbs. charge
•• UPC Code : 088381-848220
•• The electronically-controlled BL™ Brushless Motor efficiently
uses energy to match torque and RPM to the changing demands
of the application

•• Compact and ergonomic design at only 14-1/4” long
•• Weighs only 5.6 lbs. with battery for reduced operator fatigue
•• Rubberized soft grip provides increased comfort on the job
•• Slide switch with lock-on for operator convenience
•• 3-stage L.E.D. gauge indicates battery charge level

HM1812X3 70 lb. Advanced AVT® Breaker Hammer, accepts 1‑1/8” Hex bits

•• AMPS : 15 •• Efficient 15 AMP motor with improved hammer mechanism delivers
•• Blows Per Minute : 870 BPM 53.9 ft.lbs./72.8 joules of impact energy to handle the most demanding
•• Impact Energy (ft.lbs.) : 53.9 applications
•• Impact Energy (Joules) : 72.8 J
•• Vibration Control : Yes •• Advanced AVT® is a synchronized, three-component system that more
•• Vibration (m/s²) : 6.5 effectively reduces vibration in varying conditions resulting in a low 6.5m/
•• Noise Level : 106 dB s2
•• Cord Length (ft) : 16.4’
•• Overall Length : 33-1/4” •• Advanced AVT® provides a mechanical counterbalance system which greatly
•• Net Weight : 69.1 lbs. reduces vibration and directs more impact energy to the work surface for
•• Bit Type : 1-1/8” Hex increased user comfort and greater productivity
•• Power Type : Corded
•• Breaker/Demo class : 70 •• Advanced AVT® provides a vibration absorbing housing which moves
•• Shipping Weight : 140 lbs. independently of the motor and hammer mechanism effectively isolating more
•• UPC Code : 088381-801799 vibration away from the user

•• Advanced AVT® provides rubberized fixed handles which dampen vibration for
increased comfort and precision

•• Soft start is designed to suppress start-up reaction for greater accuracy on
start up

•• “Soft no-load” function automatically reduces the speed of the motor when not
in use which helps increase tool life and performance

•• L.E.D. power light indicates switch failure or cord damage
•• L.E.D. service light notifies the user approximately 8 hours before brushes need

to be replaced
•• Automatic brush cut-off protects commutator from damage for longer tool

life

1-800-778-2217 187

TOOLS: HAMMERS

HM1810X3 70 lb. AVT® Breaker Hammer, accepts 1‑1/8” Hex bits

•• AMPS : 15 •• Efficient 15 AMP motor with improved hammer mechanism
•• Blows Per Minute : 1,100 BPM delivers 46.5 ft.lbs. of impact energy to handle the most
•• Impact Energy (ft.lbs.) : 46.5 demanding applications
•• Impact Energy (Joules) : 63 J
•• Vibration Control : Yes •• Anti-Vibration Technology is an internal counterbalance system
•• Vibration (m/s²) : 9 that greatly reduces vibration and directs more impact energy
•• Noise Level : 107 dB to the work surface for increased user comfort and greater
•• Cord Length (ft) : 16.4’ productivity
•• Overall Length : 32-1/2”
•• Net Weight : 71.3 lbs. •• Fixed movement handles for more control and better accuracy
•• Bit Type : 1-1/8” Hex •• Automatic brush cut-off protects commutator from damage for
•• Breaker/Demo class : 70
•• Power Type : Corded longer tool life
•• Shipping Weight : 141.3 lbs. •• L.E.D. power light indicates switch failure or cord damage
•• UPC Code : 088381-075213 •• AC/DC switch for use with alternative power source
•• Low profile design is engineered for easier movement around

uneven surfaces
•• Large, easy-to-operate switch for operator comfort and control
•• 16.4 ft. jobsite cord for greater versatility
•• Cylindrical tool holder enables new bolt holes to be drilled should

the original bolts break

HM1317CB 42 lb. AVT® Demolition Hammer, accepts 1‑1/8” Hex bits

TOOLS: HAMMERS •• AMPS : 14 •• Powerful 14 AMP motor delivers 25.7 ft.lbs. of impact energy to handle the most
•• Blows Per Minute (variable speed) : 730 - 1,450 BPM demanding applications
•• Impact Energy (ft.lbs.) : 25.7
•• Impact Energy (Joules) : 34.9 J •• Anti-Vibration Technology (AVT®) is an internal counterbalance system that
•• Vibration Control : Yes greatly reduces vibration by moving a counterweight in the opposite direction
•• Vibration (m/s²) : 7 of the drive piston
•• Noise Level : 101 dB
•• Cord Length (ft) : 16.4’ •• Constant speed control automatically applies additional power to the motor to
•• Overall Length : 32-1/2” maintain speed under load to complete the most challenging jobs
•• Net Weight : 41.9 lbs.
•• Bit Type : 1-1/8” Hex •• Variable speed control dial enables user to match the speed to the application
•• Power Type : Corded for greater versatility
•• Shipping Weight : 60.39 lbs.
•• UPC Code : 088381-604659 •• L.E.D. service light notifies the user approximately 8 hours before the brushes
need to be replaced

•• L.E.D. power light indicates switch failure or cord damage
•• Rubberized ergonomic soft grip provides more comfort
•• Soft start suppresses start-up reaction for more precision and better

accuracy
•• Extended life brushes are longer for more work between service intervals and

less downtime
•• Automatic brush cut-off protects commutator from damage for longer

tool life

HM1214C 27 lb. AVT® Demolition Hammer, accepts SDS‑MAX bits and 1” Rotary Hammer

•• AMPS : 14 •• Powerful 14.0 AMP motor to handle the most demanding applications
•• Blows Per Minute (variable speed) : 730 - 1,450 •• Anti-Vibration Technology is an internal counterbalance system that greatly

BPM reduces vibration and directs more impact energy to the work surface for
•• Impact Energy (ft.lbs.) : 25.7 increased user comfort and greater productivity
•• Impact Energy (Joules) : 34.9 J •• Constant speed control automatically applies additional power to the motor to
•• Vibration Control : Yes maintain speed under load to complete the most challenging jobs
•• Vibration (m/s²) : 7 •• Soft start suppresses start-up reaction for more precision and better
•• Noise Level : 101 dB accuracy
•• Cord Length (ft) : 16.4’ •• Variable speed control dial enables user to match the speed to the application
•• Overall Length : 32-1/2” for greater versatility
•• Net Weight : 41.9 lbs. •• L.E.D. service light notifies the user approximately 8 hours before the brushes
•• Bit Type : 1-1/8” Hex need to be replaced
•• Power Type : Corded •• L.E.D. power light indicates switch failure or cord damage
•• Shipping Weight : 60.39 lbs. •• Makita Motor Advantage engineered with field core interlocking steel
•• UPC Code : 088381-604659 laminations, dual ball bearing armature and more copper commutator bars,
increasing energy transfer efficiency for more power and longer tool life
•• Extended life brushes are longer for more work between service intervals and
less downtime
•• 12 bit angle settings allow the bit to be set at different positions for operating
convenience

HM1203C 20 lb. Demolition Hammer, accepts SDS‑MAX bits

•• AMPS : 14 •• Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to
•• Blows Per Minute (variable speed) : 950 - 1,900 handle the most demanding applications

BPM •• Constant speed control automatically applies additional power
•• Impact Energy (ft.lbs.) : 18.8 to the motor to maintain speed under load to complete the most
•• Impact Energy (Joules) : 25.5 J challenging jobs
•• Vibration Control : No
•• Vibration (m/s²) : 15.5 •• Soft start suppresses start-up reaction for more precision and
•• Noise Level : 95 dB better accuracy
•• Overall Length : 22-3/4”
•• Net Weight : 20.3 lbs. •• L.E.D. service light notifies the user approximately 8 hours before
•• Bit Type : Accepts SDS-MAX the brushes need to be replaced
•• Breaker/Demo class : 20
•• Power Type : Corded •• L.E.D. power light indicates switch failure or cord damage
•• Shipping Weight : 36 lbs. •• Variable speed control dial enables user to match the speed to the
•• UPC Code : 088381-601986
application for greater versatility
•• Extended life brushes are longer for more work between service

intervals and less downtime
•• 12 bit angle settings allow the bit to be set at different positions

for operating convenience
•• Automatic brush cut-off protects commutator from damage for

longer tool life
•• Rubberized ergonomic soft grip provides more comfort

188 HPIONLINE®.COM

TOOLS: HAMMERS

HM1211B 20 lb. Demolition Hammer, accepts 3/4” Hex bits

•• AMPS : 10 •• Powerful 10 AMP motor for faster and efficient operation
•• Blows Per Minute : 2,000 BPM •• Comfortable rubber D-shaped grip side handle absorbs vibration;
•• Impact Energy (ft.lbs.) : 10.5
•• Impact Energy (Joules) : 14.2 J secures in four positions for operator comfort
•• Vibration Control : No •• One-touch latch bit retainer for quick bit changes
•• Vibration (m/s²) : 25 •• Automatic brush cut-off protects commutator from damage for
•• Noise Level : 96 dB
•• Overall Length : 19-5/16” longer tool life
•• Net Weight : 20.7 lbs. •• Factory grease packed for reduced maintenance
•• Bit Type : 3/4” Hex - 21/32” Round •• AC/DC switch for use with alternative power source
•• Breaker/Demo class : 20 •• Makita Motor Advantage engineered with field core interlocking
•• Power Type : Corded
•• Shipping Weight : 33 lbs. steel laminations, dual ball bearing armature and more copper
•• UPC Code : 088381-012287 commutator bars, increasing energy transfer efficiency for more
power and longer tool life
•• Accepts 3/4” Hex Shank bits
•• Ideal for chiseling, chipping and scaling operations
•• Rugged metal gear housing for longer tool life

HM1111C 17 lb. AVT® Demolition Hammer, accepts SDS‑MAX bits TOOLS: HAMMERS

•• AMPS : 14 •• Powerful 14 AMP motor delivers 12.7 ft.lbs. of impact energy to handle the
•• Blows Per Minute (variable speed) : most demanding applications

1,100 - 2,650 BPM •• Anti-Vibration Technology is an internal counterbalance system that greatly
•• Impact Energy (ft.lbs.) : 12.7 reduces vibration for increased user comfort and greater productivity
•• Impact Energy (Joules) : 17.2 J
•• Vibration Control : Yes •• Detached rear handle is spring loaded and engineered to provide less vibration
•• Vibration (m/s²) : 8 and more control
•• Noise Level : 99 dB
•• Overall Length : 20-3/4” •• Constant speed control automatically applies additional power to the motor to
•• Net Weight : 17.7 lbs. maintain speed under load to complete the most challenging jobs
•• Bit Type : Accepts SDS-MAX
•• Breaker/Demo class : 17 •• Soft start suppresses start-up reaction for more control and better accuracy
•• Power Type : Corded •• Variable speed control dial enables user to match the speed to the application
•• Shipping Weight : 28.6 lbs.
•• UPC Code : 088381-609395 for greater versatility
•• L.E.D. service light notifies the user approximately 8 hours before the brushes

need to be replaced
•• L.E.D. power light indicates switch failure or cord damage
•• Extended life brushes are longer for more work between service intervals and

less downtime
•• Automatic brush cut-off protects commutator from damage for longer tool

life

HM0870C 11 lb. Demolition Hammer, accepts SDS‑MAX bits

•• AMPS : 10 •• Powerful 10 AMP motor delivers 8.4 ft.lbs. of impact energy to
•• Blows Per Minute (variable speed) : 1,100 - handle the most demanding applications

2,650 BPM •• Constant speed control automatically applies additional power
•• Impact Energy (ft.lbs.) : 8.4 to the motor to maintain speed under load to complete the most
•• Impact Energy (Joules) : 11.4 J challenging jobs
•• Vibration Control : No
•• Vibration (m/s²) : 11 •• Soft start suppresses start-up reaction for more control and better
•• Noise Level : 98 dB accuracy
•• Overall Length : 17-3/4”
•• Net Weight : 11.1 lbs. •• L.E.D. service light notifies the user approximately 8 hours before
•• Bit Type : Accepts SDS-MAX the brushes need to be replaced
•• Breaker/Demo class : 11
•• Power Type : Corded •• L.E.D. power light indicates switch failure or cord damage
•• Shipping Weight : 18.5 lbs. •• Variable speed control dial enables user to match the speed to the
•• UPC Code : 088381-605328
application for greater versatility
•• Extended life brushes are longer for more work between service

intervals and less downtime
•• 12 bit angle settings allow the bit to be set at different positions for

operating convenience
•• Automatic brush cut-off protects commutator from damage for

longer tool life
•• Rubberized ergonomic soft grip provides more comfort

HM0810B 11 lb. Demolition Hammer, accepts 3/4” Hex bits

•• AMPS : 8.3 •• Compact with less weight for improved balance
•• Blows Per Minute : 2,900 BPM •• Soft rubber grip side handle minimizes vibration and swivels 360°
•• Impact Energy (ft.lbs.) : 5.6
•• Impact Energy (Joules) : 7.6 J for operator convenience
•• Vibration Control : No •• Innovative anti-vibration spring is positioned between tool body
•• Vibration (m/s²) : 15
•• Noise Level : 94 dB and rear handle for reduced operator fatigue
•• Overall Length : 16-5/8” •• One-touch tool retainer action for easy accessory installation and
•• Net Weight : 12.8 lbs.
•• Bit Type : 3/4” Hex - 21/32” Round removal
•• Breaker/Demo class : 11 •• Makita Motor Advantage engineered with field core interlocking
•• Power Type : Corded
•• Shipping Weight : 19.4 lbs. steel laminations, dual ball bearing armature and more copper
•• UPC Code : 088381-011860 commutator bars, increasing energy transfer efficiency for more
power and longer tool life
•• Extended life brushes are longer for more work between service
intervals and less downtime
•• Factory grease packed for reduced maintenance
•• Ideal for light chiseling, chipping and scaling operations
•• Accepts 3/4” Hex Shank bits
•• Rugged metal gear housing for longer tool life

1-800-778-2217 189

TOOLS: HAMMERS

HR5212C 2” Advanced AVT® Rotary Hammer, accepts SDS‑MAX bits

•• AMPS : 13.5 •• Powerful 15 AMP motor delivers 14 ft.lbs. / 19 J. of impact energy to handle the most
•• Max. Capacity (concrete drilling) : demanding applications

1-3/4” •• Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system
•• Optimum Range (concrete drilling) : 3/4” that more effectively reduces vibration resulting in a low 5m/s2

- 1-3/8” •• Advanced AVT® includes an air actuated counterbalance that directs air pressure from
•• Max. Capacity (concrete drilling w/ core the crank and barrel room into the counterbalance cylinders to move counterweight
pistons in the opposite direction of the hammer mechanism to effectively reduce
bit) : 5” vibration
•• Impact Energy (ft.lbs.) : 9.2
•• Impact Energy (Joules) : 12.5 J •• Advanced AVT® includes a vibration absorbing housing with a spring loaded back
•• Blows Per Minute (variable speed) : 1,250 handle and housing which moves independently of the motor and hammer mechanism
effectively isolating more vibration away from the user
- 2,750 BPM
•• No Load Speed (variable speed) : 130 - •• Advanced AVT® includes an integrated damper spring at the base of the impact bolt
engineered to absorb impact vibrations from the drill bit
280 RPM
•• Vibration Control : Yes •• Constant speed control automatically applies additional power to the motor to maintain
•• Vibration (m/s²) : 9.5 speed under load to complete the most challenging jobs
•• Overall Length : 18”
•• Cord Length (ft) : 16.4’ •• Soft start suppresses start-up reaction for more precision and better accuracy
•• Net Weight : 19.6 lbs. •• “Soft no-load” function automatically reduces the speed of the motor when idling to

help increase tool life and performance
•• Variable speed control dial enables user to match the speed to the application for

greater versatility
•• Torque limiting clutch engineered to prevent gear damage by automatically disengaging

gears if the bit binds

HR5000 2’’ Rotary Hammer, accepts Spline bits

TOOLS: HAMMERS •• AMPS : 11 •• All ball-and-needle bearing construction for longer tool life
•• Max. Capacity (concrete drilling) : 2” •• Powerful 11 AMP motor delivers 2,100 BPM for the most
•• Optimum Range (concrete drilling) : 5/8” - 1-3/8”
•• Max. Capacity (concrete drilling w/ core bit) : 5-7/8” demanding applications
•• Impact Energy (ft.lbs.) : 8.7 •• Built-in clutch reduces gear damage by disengaging gears if the
•• Impact Energy (Joules) : 11.8 J
•• Blows Per Minute : 2,100 BPM bit binds
•• No Load Speed : 260 RPM •• 2-mode operation for “Hammering Only” or “Hammering with
•• Vibration Control : No
•• Vibration (m/s²) : 25 Rotation” for multiple applications
•• Overall Length : 18-3/4” •• Sequential impact timing delivers timed hammering during
•• Cord Length (ft) : 8.2’
•• Net Weight : 21.8 lbs. rotation to minimize overlapping bit impacts resulting in up to
•• Bit Type : Accepts Spline shank 50% faster drilling
•• Power Type : Corded •• Makita Motor Advantage engineered with field core interlocking
•• Shipping Weight : 35 lbs. steel laminations, dual ball bearing armature and more copper
•• UPC Code : 088381-003360 commutator bars, increasing energy transfer efficiency for more
power and longer tool life
•• Automatic brush cut-off protects commutator from damage for
longer tool life
•• AC/DC switch for use with alternative power source
•• Large comfortable grip swivels 360° for easy handling
•• “Spline” type drive system for maximum power

HR4510C 1‑3/4” AVT® Rotary Hammer, accepts SDS‑MAX bits

•• AMPS : 13.5 •• Powerful 13.5 AMP motor delivers 9.2 ft.lbs. of impact energy to handle the
•• Max. Capacity (concrete drilling) : 1-3/4” most demanding applications
•• Optimum Range (concrete drilling) : 3/4” - 1-3/8”
•• Max. Capacity (concrete drilling w/ core bit) : 5” •• Constant speed control automatically applies additional power to the motor to
•• Impact Energy (ft.lbs.) : 9.2 maintain speed under load to complete the most challenging jobs
•• Impact Energy (Joules) : 12.5 J
•• Blows Per Minute (variable speed) : 1,250 - 2,750 BPM •• Soft start suppresses start-up reaction for increased accuracy
•• No Load Speed (variable speed) : 130 - 280 RPM •• L.E.D. service light notifies the user approximately 8 hours before the brushes
•• Vibration Control : Yes
•• Vibration (m/s²) : 9.5 need to be replaced
•• Overall Length : 18” •• L.E.D. power lights indicate switch failure or cord damage
•• Cord Length (ft) : 16.4’ •• Anti-Vibration Technology is an internal counterbalance system that greatly
•• Net Weight : 19.6 lbs.
reduces vibration and directs more impact energy to the work surface for
increased user comfort and greater productivity
•• Variable speed control dial enables user to match the speed to the application
for greater versatility
•• Torque limiting clutch engineered to prevent gear damage by automatically
disengaging gears if the bit binds
•• Sequential impact timing delivers timed hammering during rotation to
minimize overlapping bit impacts for up to 50% faster drilling
•• Extended life brushes are longer for more work between service intervals and
less downtime

HR4013C 1‑9/16” Advanced AVT® Rotary Hammer, accepts SDS‑MAX bits

•• AMPS : 11 •• The 1-9/16” AVT® Rotary Hammer (model HR4013C)
•• Max. Capacity (concrete drilling) : 1-9/16” has 45% less vibration and 20% more impact energy
•• Optimum Range (concrete drilling) : 5/8” - 1-1/4” than the previous model. It is engineered with enhanced
•• Max. Capacity (concrete drilling w/ core bit) : 4-1/8” Anti-Vibration Technology (AVT®), a synchronized
•• Impact Energy (ft.lbs.) : 8.4 three-component system for significantly less vibration.
•• Impact Energy (Joules) : 11.4 J The result of the enhanced AVT® is a category-leading
•• Blows Per Minute (variable speed) : 1,450 - 2,900 BPM vibration rating of 5m/s².
•• No Load Speed (variable speed) : 250 - 500 RPM
•• Vibration Control : Yes •• The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4
•• Vibration (m/s²) : 5 Joules) of impact energy, 20% more than the previous
•• Overall Length : 18-11/16” model for faster drilling. An added feature is the option
•• Cord Length (ft) : 15.6’ of lock-on or trigger-activated in the “chipping only”
•• Net Weight : 15.1 lbs. mode, with a push button start/stop control for more
•• Bit Type : Accepts SDS-MAX convenient operation.
•• Power Type : Corded
•• Shipping Weight : 27.8 lbs.
•• UPC Code : 088381-651325

190 HPIONLINE®.COM

TOOLS: HAMMERS

HR4002 1‑9/16” Rotary Hammer, accepts SDS‑MAX bits

•• AMPS : 10 •• Powerful 10 AMP motor delivers 4.6 ft.lbs. of impact energy to
•• Max. Capacity (concrete drilling) : 1-9/16” handle the most demanding applications
•• Optimum Range (concrete drilling) : 1/2” - 1”
•• Max. Capacity (concrete drilling w/ core bit) : 4-1/8” •• 2-mode operation for “Hammering Only” or “Hammering with
•• Impact Energy (ft.lbs.) : 4.6 Rotation”
•• Impact Energy (Joules) : 6.2 J
•• Blows Per Minute : 2,500 BPM •• Torque limiting clutch engineered to prevent gear damage by
•• No Load Speed : 680 RPM automatically disengaging gears if the bit binds
•• Vibration Control : No
•• Vibration (m/s²) : 17.5 •• Rubberized ergonomic soft grip provides more comfort
•• Overall Length : 18” •• “No hammering when idling” functions helps increase tool life
•• Cord Length (ft) : 9.8’ •• One-touch sliding chuck for quick bit changes
•• Net Weight : 14.6 lbs. •• 12 bit angle settings allow the bit to be set at different positions
•• Bit Type : Accepts SDS-MAX
•• Power Type : Corded for operating convenience
•• Shipping Weight : 26.89 lbs. •• Automatic brush cut-off protects commutator from damage for
•• UPC Code : 088381-081566
longer tool life
HR4041C •• 12 bit angle settings allow the bit to be set at different positions

for operating convenience
•• Makita Motor Advantage engineered with field core interlocking

steel laminations, dual ball bearing armature and more copper
commutator bars, increasing energy transfer efficiency for more
power and longer tool life

1‑9/16” Rotary Hammer, accepts Spline bits

•• AMPS : 12 •• Powerful 12 AMP motor delivers 6.8 ft.lbs. of impact energy to handle the most TOOLS: HAMMERS
•• Max. Capacity (concrete drilling) : 1-9/16” demanding applications
•• Optimum Range (concrete drilling) : 1/2” - 1”
•• Max. Capacity (concrete drilling w/ core bit) : 4-5/8” •• Constant speed control automatically applies additional power to the motor to
•• Impact Energy (Joules) : 9.2 J maintain speed under load to complete the most challenging jobs
•• Impact Energy (ft.lbs.) : 6.8
•• Blows Per Minute (variable speed) : 1,300 - 2,600 BPM •• Soft start suppresses start-up reaction for increased accuracy
•• No Load Speed (variable speed) : 230 - 460 RPM •• Variable speed control dial enables user to match the speed to the application
•• Vibration Control : No
•• Vibration (m/s²) : 15 for greater versatility
•• Overall Length : 16-7/8” •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Cord Length (ft) : 16.4’
•• Net Weight : 14.8 lbs. disengaging gears if the bit binds
•• Bit Type : Accepts Spline shank •• Sequential impact timing delivers timed hammering during rotation to
•• Power Type : Corded
•• Shipping Weight : 20.3 lbs. minimize overlapping bit impacts for up to 50% faster drilling
•• UPC Code : 088381-081191 •• Automatic brush cut-off protects commutator from damage for longer tool

life
•• 2-mode operation for “Hammering Only” or “Hammering with Rotation” for

multiple applications
•• “No hammering when idling” function helps increase tool life
•• High quality aluminum housing for greater durability and longer tool life

XRH07PTU 18V X2 LXT® Lithium‑Ion (36V) Brushless Cordless 1‑9/16” Advanced AVT® Rotary
Hammer Kit, accepts SDS‑MAX bits, AWS™ (5.0Ah)

•• Max. Capacity (concrete drilling) : 1-9/16” •• The Makita 18V X2 LXT® (36V) Brushless 1-9/16” Advanced AVT®
•• Optimum Range (concrete drilling) : 5/8” - 1-1/4” Rotary Hammer with AWS is a cordless concrete solution that’s
•• Max. Capacity (concrete drilling w/ core bit) : loaded with advanced engineering for maximum efficiency. It’s
equipped with Auto-Start Wireless System (AWS) for wireless
4-1/8” connectivity with an AWS-equipped dust extractor (sold separately),
•• Impact Energy (ft.lbs.) : 8.4 and features Advanced AVT® for reduced vibration. It’s powered
•• Impact Energy (Joules) : 11.4 J by two 18V LXT® batteries and an efficient brushless motor for
•• Blows Per Minute (variable speed) : 1,450 - 2,900 maximum power, speed and run-time for corded demands, without
the cord.
BPM
•• No Load Speed (variable speed) : 250 - 500 RPM •• The XRH07PTU is engineered with Advanced Anti-Vibration
•• Vibration Control : Yes Technology (AVT®), a synchronized three-component system for
•• Vibration (m/s²) : 5 significantly less vibration. AVT® is more than just a padded handle.
•• Battery : 2X 18V LXT® Lithium-Ion The three-component system includes an internal counterbalance
•• Overall Length : 18-5/8” that uses air pressure to move counterweight pistons in the opposite
•• Net Weight : 16.8 lbs. direction of the drive piston to actively reduce vibration. The result
•• Bit Type : Accepts SDS-MAX is a low vibration rating of only 5m/s², but with no compromise in
•• Power Type : Cordless performance: The efficient brushless motor delivers a full 8.4 ft. lbs.
•• Shipping Weight : 35.28 lbs. of impact energy, with 250-500 RPM and 1,450-2,900 BPM.
•• UPC Code : 088381-856188

HR3210C 1‑1/4” AVT® Rotary Hammer, accepts SDS‑PLUS bits

•• AMPS : 8.2 •• Powerful 8.2 AMP motor delivers 4.7 ft.lbs. of impact energy to handle the most
•• Max. Capacity (concrete drilling) : 1-1/4” demanding applications
•• Optimum Range (concrete drilling) : 1/2” - 7/8”
•• Max. Capacity (concrete drilling w/ core bit) : 3-1/2” •• Anti-Vibration Technology (AVT®) is an internal counterbalance system that
•• Impact Energy (ft.lbs.) : 4.1 greatly reduces vibration by moving a counterweight in the opposite direction
•• Impact Energy (Joules) : 5.5 J of drive piston for increased user comfort and productivity
•• Blows Per Minute (variable speed) : 1,650 - 3,300 BPM
•• No Load Speed (variable speed) : 315 - 630 RPM •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Vibration Control : Yes disengaging gears if the bit binds
•• Vibration (m/s²) : 10
•• Overall Length : 15-5/8” •• Constant speed control automatically applies additional power to the motor to
•• Cord Length (ft) : 16.4’ maintain speed under load to complete the most challenging jobs
•• Net Weight : 11.4 lbs.
•• Bit Type : Accepts SDS-PLUS •• Soft start suppresses start-up reaction for more control and better accuracy
•• Power Type : Corded •• Variable speed control dial enables user to match the speed to the application
•• Shipping Weight : 19.84 lbs.
•• UPC Code : 088381-088718 for greater versatility
•• L.E.D. service light notifies the user approximately 8 hours before the brushes

need to be replaced
•• L.E.D. power light indicates switch failure or cord damage
•• Extended life brushes are longer for more work between service intervals and

less downtime
•• Automatic brush cut-off protects commutator from damage for longer tool

life

1-800-778-2217 191

TOOLS: HAMMERS

HR2811F 1‑1/8’’ Rotary Hammer, accepts SDS‑PLUS bits and 4‑1/2” Angle Grinder

•• AMPS : 7 •• Powerful 7.0 AMP motor delivers 2.1 ft.lbs. of impact energy to
•• Max. Capacity (concrete drilling) : 1-1/8” handle the most demanding applications
•• Max. Capacity (concrete drilling w/ core bit) :
•• L.E.D. light illuminates drilling surface for more productivity in
3-1/8” low light applications
•• Impact Energy (Joules) : 2.9 J
•• Impact Energy (ft.lbs.) : 2.1 •• Torque limiting clutch engineered to prevent gear damage by
•• Vibration (m/s²) : 15 automatically disengaging gears if the bit binds
•• Blows Per Minute (variable speed) : 0 - 4,500 BPM
•• No Load Speed (variable speed) : 0 - 1,100 RPM •• 3-mode operation for “Rotation Only”, “Hammering with
•• Overall Length : 12-5/8” Rotation” or “Hammering Only”
•• Cord Length (ft) : 8.2’
•• Net Weight : 7.7 lbs. •• One-touch sliding chuck for quick bit changes
•• Bit Type : Accepts SDS-PLUS •• Sequential impact timing delivers timed hammering during
•• Power Type : Corded
•• Optimum Range (concrete drilling) : 1/4” - 5/8” rotation to minimize overlapping bit impacts for up to 50% faster
•• Shipping Weight : 20.3 lbs. drilling
•• UPC Code : 088381-603447 •• “No hammering when idling” function helps increase tool life
•• Ergonomic “D-shaped” handle with rubberized soft grip for
increased comfort
•• Recessed lock-on button for continuous operation
•• Extended life brushes for more work between service intervals
and less downtime

XRH10PTW 18V X2 LXT® (36V) Brushless Cordless 1‑1/8” AVT® Rotary Hammer Kit, SDS‑PLUS, w/
HEPA Dust Extractor, AFT®, AWS™ Capable (5.0Ah)

TOOLS: HAMMERS •• Max. Capacity (concrete drilling) : 1-1/8” •• X2 LXT® technology delivers up to 140 1/2” x 2-3/8” holes per charge using
•• Optimum Range (concrete drilling) : 3/16” - 5/8” two 18V LXT® 5.0Ah batteries
•• Max. Capacity (concrete drilling w/ core bit) : 2-1/8”
•• Impact Energy (ft.lbs.) : 2.3 •• Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs.
•• Impact Energy (Joules) : 3.2 J of impact energy to handle the most demanding applications
•• Blows Per Minute (variable speed) : 0 - 5,000 BPM
•• No Load Speed (variable speed) : 0 - 980 RPM •• OSHA Table 1 compliant on-board dust extractor includes a filter cleaning
•• HEPA filter : Yes mechanism designed to help maintain optimum suction efficiency
•• Container Hole Count Capacity : 25 holes of dimension 5/8”x2”
•• Filter Life (Approx. container fillings) : 200 •• Active Feedback-Sensing Technology (AFT®) electronically turns off the motor
•• Vibration Control : Yes if rotation of bit is suddenly forced to stop
•• Vibration (m/s²) : 9
•• Battery : 2X 18V LXT® Lithium-Ion •• Auto-Start Wireless System (AWS™) which utilizes Bluetooth® technology for
•• Overall Length : 14-3/4” wireless power-on/off communication between tool and dust extractor
•• Net Weight (with battery) : 11 lbs.
•• Bit Type : Accepts SDS-PLUS •• AWS™ capable with Auto-Start Wireless Transmitter (part no. 198901-5) sold
•• Power Type : Cordless separately
•• Automatic-start Wireless System (AWS™) : Capable (transmitter sold
•• Anti-Vibration Technology (AVT®) is an active internal counterbalance system
separately) which is engineered to reduce vibration for increased comfort
•• Active Feedback-sensing Technology (AFT®) : Yes
•• Shipping Weight : 23.02 lbs. •• Vibration-absorbing back handle and side handle further reduce vibration and
•• UPC Code : 088381-865159 increase comfort on the job

•• Torque limiting clutch engineered to prevent gear damage by automatically
disengaging gears if the bit binds

•• Constant speed control automatically applies additional power to the motor to
maintain speed under load to complete the most challenging jobs

HR2641 1” AVT® Rotary Hammer, accepts SDS‑PLUS bits (D‑Handle)

•• AMPS : 8 •• Powerful 8 AMP motor delivers 2.1 ft.lbs./2.9 J. of impact energy to handle the
•• Max. Capacity (concrete drilling) : 1” most demanding applications
•• Optimum Range (concrete drilling) : 1/4” - 5/8”
•• Max. Capacity (concrete drilling w/ core bit) : 3-1/8” •• Anti-Vibration Technology (AVT®) is an internal counterbalance system that
•• Impact Energy (ft.lbs.) : 2.1 greatly reduces vibration by moving a counterweight in the opposite direction
•• Impact Energy (Joules) : 2.9 J of the drive piston
•• Blows Per Minute (variable speed) : 0 - 4,500 BPM
•• No Load Speed (variable speed) : 0 - 1,100 RPM •• Integrated damper spring at the base of the impact bolt is engineered to absorb
•• Vibration Control : Yes impact vibrations from the drill bit
•• Vibration (m/s²) : 11.5
•• Overall Length : 16-5/8” •• Recessed hammer function selector located below gear housing for improved
•• Cord Length (ft) : 13.1’ durability
•• Net Weight : 7.1 lbs.
•• Bit Type : Accepts SDS-PLUS •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Power Type : Corded disengaging gears if the bit binds
•• Shipping Weight : 11.55 lbs.
•• UPC Code : 088381-687485 •• Variable speed trigger enables user to match the speed to the application for
greater versatility

•• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or
“Chipping Only” for multiple applications

•• 40 bit angle settings allow the bit to be set at different positions for operating
convenience

•• Ergonomic “D-shaped” handle with rubberized soft grip for increased
comfort

•• Retractable hook allows tool to remain close by but never in the way

HR2661 1” AVT® Rotary Hammer, accepts SDS‑PLUS bits, w/ HEPA Dust Extractor (D‑handle)

•• AMPS : 8 •• Powerful 8 AMP motor delivers 1.6 ft.lbs./2.2 J. of impact energy to handle
•• Max. Capacity (concrete drilling) : 1” the most demanding applications
•• Optimum Range (concrete drilling) : 1/4” - 5/8”
•• Max. Hole Depth : 7-7/16” •• On-board dust extractor captures concrete dust during drilling and is
•• Max. Capacity (concrete drilling w/ core bit) : 3-1/8” activated by the tool for operator convenience
•• Impact Energy (ft.lbs.) : 1.6
•• Impact Energy (Joules) : 2.2 J •• Efficient HEPA filtration system captures 99.97% of particulates .3 microns
•• Blows Per Minute (variable speed) : 0 - 4,500 BPM and larger
•• No Load Speed (variable speed) : 0 - 1,100 RPM
•• HEPA filter : Yes •• Anti-Vibration Technology (AVT®) is an internal counterbalance system that
•• Equipped Filter Efficiency : 99.97% of .3 microns actively works to reduce vibration to the operator
•• Container Hole Count Capacity : 36 holes of dimension 3/8”x2-3/8”
•• Filter Life (Approx. container fillings) : 200 •• Transparent dust container provides needed visibility in determining when
•• Vibration Control : Yes the dust box needs to be emptied
•• Vibration (m/s²) : 9.5
•• Sound Rating (decibels) : 90 dB(A) •• Depth stop adjustment allows drilling up to 7-7/16” deep for increased
•• Overall Length : 18-7/8” capacity
•• Cord Length (ft) : 13.1’
•• Net Weight : 9.7 lbs. •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Bit Type : Accepts SDS-PLUS disengaging gears if the bit binds
•• Dust Collection : Yes
•• Power Type : Corded •• Retractable hook allows tool to remain close by but never in the way
•• Shipping Weight : 18.081 lbs. •• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or
•• UPC Code : 088381-845984
“Chipping Only” for multiple applications
•• Variable speed trigger enables user to match the speed to the application for

greater versatility

192 HPIONLINE®.COM

TOOLS: HAMMERS

HR2651 1” AVT® Rotary Hammer, accepts SDS‑PLUS bits, w/ HEPA Dust Extractor (Pistol‑grip)

•• AMPS : 7 •• Powerful 7 AMP motor delivers 1.6 ft.lbs./2.2 J. of impact energy to handle the
•• Max. Capacity (concrete drilling) : 1” most demanding applications
•• Optimum Range (concrete drilling) : 1/4” - 5/8”
•• Max. Hole Depth : 7-7/16” •• Anti-Vibration Technology (AVT®) is an internal counterbalance system that
•• Max. Capacity (concrete drilling w/ core bit) : 3-1/8” greatly reduces vibration by moving a counterweight in the opposite direction
•• Impact Energy (Joules) : 2.2 J of the drive piston
•• Impact Energy (ft.lbs.) : 1.6
•• Blows Per Minute (variable speed) : 0 - 4,600 BPM •• The built-on dust extractor captures concrete dust during drilling and is
•• No Load Speed (variable speed) : 0 - 1,200 RPM activated by the tool for operator convenience
•• HEPA filter : Yes
•• Equipped Filter Efficiency : 99.97% of .3 microns •• Efficient HEPA filtration system captures 99.97% of particulates .3 microns and
•• Container Hole Count Capacity : 36 holes of dimension 3/8”x2-3/8” larger
•• Filter Life (Approx. container fillings) : 200
•• Vibration Control : Yes •• Transparent dust container provides needed visibility in determining when the
•• Vibration (m/s²) : 11.5 dust box needs to be emptied
•• Sound Rating (decibels) : 90 dB(A)
•• Overall Length : 16-7/16” •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Cord Length (ft) : 13.1’ disengaging gears if the bit binds
•• Net Weight : 9.3 lbs.
•• Bit Type : Accepts SDS-PLUS •• Depth stop adjustment allows drilling up to 7-7/16” deep for increased
•• Dust Collection : Yes capacity
•• Power Type : Corded
•• Shipping Weight : 20.066 lbs. •• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or
•• UPC Code : 088381-845755 “Chipping Only” for multiple applications

•• Variable speed trigger enables user to match the speed to the application for
greater versatility

•• 40 bit angle settings allow the bit to be set at different positions for operating
convenience

HR2631F 1” AVT® Rotary Hammer, accepts SDS‑PLUS bits

•• (1) Tool Case (824695-3) SPECS •• Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the TOOLS: HAMMERS
•• AMPS : 7 most demanding applications
•• Max. Capacity (concrete drilling) : 1”
•• Optimum Range (concrete drilling) : 3/16” - 1/2” •• Anti-Vibration Technology (AVT®) is an internal counterbalance system
•• Max. Capacity (concrete drilling w/ core bit) : that greatly reduces vibration by moving a counterweight in the opposite
direction of drive piston
2-11/16”
•• Impact Energy (ft.lbs.) : 2.1 •• Integrated damper spring at the base of the impact bolt is engineered to
•• Impact Energy (Joules) : 2.9 J absorb impact vibrations from the drill bit
•• Blows Per Minute (variable speed) : 0 - 4,600 BPM
•• No Load Speed (variable speed) : 0 - 1,200 RPM •• Torque limiting clutch engineered to prevent gear damage by automatically
•• Vibration Control : Yes disengaging gears if the bit binds
•• Vibration (m/s²) : 11.5
•• Overall Length : 15-1/8” •• L.E.D. light illuminates drilling surface for more productivity in low light
•• Cord Length (ft) : 13.1’ applications
•• Net Weight : 6.6 lbs.
•• Bit Type : Accepts SDS-PLUS •• Recessed hammer function selector located below gear housing for
•• Power Type : Corded improved durability
•• Shipping Weight : 13.2 lbs.
•• UPC Code : 088381-687133 •• Variable speed trigger enables user to match the speed to the application
for greater versatility

•• 3-mode operation for various applications with “Rotation Only”,
“Hammering with Rotation” or “Chipping Only” functions

•• 40 bit angle settings allow the bit to be set at different positions for
operating convenience

•• Ergonomic “Pistol-grip” handle with rubberized soft grip for increased
comfort

XRH05PT 18V X2 LXT® Lithium‑Ion (36V) Cordless 1” Rotary Hammer Kit (5.0Ah)

•• Max. Capacity (concrete drilling) : 1” •• Two 18V LXT® Lithium-Ion batteries deliver the power and
•• Optimum Range (concrete drilling) : 1/4” - 5/8” run time for corded demands without leaving the 18V LXT®
•• Impact Energy (ft.lbs.) : 2.2 platform
•• Impact Energy (Joules) : 3 J
•• Blows Per Minute (variable speed) : 0 - 5,000 BPM •• Makita-built motor delivers 0-1,250 RPM, 0-5,000 BPM and 2.2
•• No Load Speed (variable speed) : 0 - 1,250 RPM ft.lbs. of impact energy for faster drilling
•• Vibration Control : No
•• Vibration (m/s²) : 14.5 •• Vibration-absorbing handle engineered for increased operator
•• Battery : 2X 18V LXT® Lithium-Ion comfort
•• Overall Length : 13-3/4”
•• Net Weight (with battery) : 9.3 lbs. •• Dust extraction capability with Makita Dust Attachment, #193472-7
•• Bit Type : Accepts SDS-PLUS (not included)
•• Power Type : Cordless
•• Shipping Weight : 26.2 lbs. •• Torque limiting clutch engineered to prevent gear damage by
•• UPC Code : 088381-849401 automatically disengaging gears if the bit binds

•• 3-Mode operation for “Rotation Only”, “Hammering with
Rotation” or “Hammering Only”

•• Ergonomic soft-grip handle and large 2-finger trigger provide
increased comfort on the job

•• Built-in L.E.D. light illuminates the work area
•• L.E.D. battery indicators show charge level for each battery
•• SDS-PLUS shank rotates 360° with 40 different positions

XRH011TX 18V LXT® Lithium‑Ion Brushless Cordless 1” Rotary Hammer Kit, accepts
SDS‑PLUS bits, w/ HEPA Dust Extractor (5.0Ah)

•• (1) Tool Bag SPECS •• Powerful BL™ Brushless motor delivers 0-950 RPM, 0-4,700 BPM and 1.7 ft.lbs.
•• Max. Capacity (concrete drilling) : 1” of impact energy to handle the most demanding applications
•• Optimum Range (concrete drilling) : 3/16” - 1/2”
•• Impact Energy (ft.lbs.) : 1.7 •• The on-board dust extractor attachment captures concrete dust during drilling
•• Impact Energy (Joules) : 2.4 J and is activated by the tool for operator convenience
•• Blows Per Minute (variable speed) : 0 - 4,700 BPM
•• No Load Speed (variable speed) : 0 - 950 RPM •• Extractor is powered by a separate motor to maintain drilling performance and
•• HEPA filter : Yes provide a 2-second delay to help capture remaining dust
•• Equipped Filter Efficiency : 99.97% of .3 microns
•• Container Hole Count Capacity : 25 holes of dimension •• Efficient HEPA filtration system captures 99.97% of particulates .3 microns and
larger
5/8”x2”
•• Filter Life (Approx. container fillings) : 200 •• Transparent dust container provides needed visibility in determining when the
•• Vibration Control : No dust box needs to be emptied
•• Vibration (m/s²) : 13.5
•• Battery : 18V LXT® Lithium-Ion •• Torque Limiting Clutch prevents gear damage by automatically disengaging
•• Overall Length : 14-5/8” gears if the bit binds
•• Net Weight (with battery) : 10.2 lbs.
•• Bit Type : Accepts SDS-PLUS •• Efficient BL™ Brushless motor is electronically controlled to optimize battery
•• Dust Collection : Yes energy use for up to 50% longer run time per charge
•• Power Type : Cordless
•• Shipping Weight : 19.6 lbs. •• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor
•• UPC Code : 088381-834346 to run cooler and more efficiently for longer life

•• Weighs only 10.3 lbs. with battery for reduced operator fatigue
•• Variable speed trigger enables user to match the speed to application for

greater versatility

1-800-778-2217 193

TOOLS: HAMMERS

XRH01T 18V LXT® Lithium‑Ion Brushless Cordless 1” Rotary Hammer Kit (5.0Ah)

•• Max. Capacity (concrete drilling) : 1” •• Powerful BL™ Brushless motor delivers 0-950 RPM, 0-4,700 BPM and 1.7 ft.lbs.
•• Optimum Range (concrete drilling) : 3/16” - 1/2” of impact energy to handle the most demanding applications
•• Impact Energy (ft.lbs.) : 1.7
•• Impact Energy (Joules) : 2.4 J •• Efficient BL™ Brushless motor is electronically controlled to optimize battery
•• Blows Per Minute (variable speed) : 0 - 4,700 BPM energy use for up to 50% longer run time per charge
•• No Load Speed (variable speed) : 0 - 950 RPM
•• Vibration Control : No •• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor
•• Vibration (m/s²) : 13.5 to run cooler and more efficiently for longer life
•• Battery : 18V LXT® Lithium-Ion
•• Overall Length : 12-7/8” •• Torque Limiting Clutch prevents gear damage by automatically disengaging
•• Net Weight (with battery) : 7.2 lbs. gears if the bit binds
•• Bit Type : Accepts SDS-PLUS
•• Power Type : Cordless •• Compatible with built-on HEPA Dust Extraction Vacuum Attachment part no.
•• Shipping Weight : 19 lbs. DX01 (sold separately) for improved dust extraction mobility
•• UPC Code : 088381-677066
•• Compact and ergonomic design at only 12-7/8” long
•• Weighs only 7.2 lbs. with battery for reduced operator fatigue
•• Variable speed trigger enables user to match the speed to application for

greater versatility
•• Multiple Chisel Positions has 40 different positions to align tool more

comfortably with the application
•• 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or

“Hammering Only”

XRH04T 18V LXT® Lithium‑Ion Cordless 7/8” Rotary Hammer Kit, accepts SDS‑PLUS bits (5.0Ah)

TOOLS: HAMMERS •• Max. Capacity (concrete drilling) : 7/8” •• Makita-built variable speed motor delivers 0-1,200 RPM and
•• Optimum Range (concrete drilling) : 5/32” - 1/2” 0-4,000 BPM
•• Impact Energy (ft.lbs.) : 1.4
•• Impact Energy (Joules) : 1.9 J •• 3-mode operation for “Rotation Only”, “Hammering with
•• Blows Per Minute (variable speed) : 0 - 4,000 BPM Rotation” or “Hammering Only” for multiple applications
•• No Load Speed (variable speed) : 0 - 1,200 RPM
•• Vibration Control : No •• Torque limiting clutch reduces gear damage by automatically
•• Vibration (m/s²) : 12.5 disengaging gears if bit binds
•• Battery : 18V LXT® Lithium-Ion
•• Overall Length : 16-3/8” •• Faster drilling with synchronized RPM and BPM
•• Net Weight (with battery) : 7.7 lbs. •• Job site tested shock absorbent handle protects the battery
•• Bit Type : Accepts SDS-PLUS
•• Power Type : Cordless housing for extra durability
•• Shipping Weight : 16.2 lbs. •• One-touch sliding chuck for quick bit changes
•• UPC Code : 088381-834254 •• Chisel rotates 360° with 40 different positions
•• Compact and ergonomic design at only 16-3/8” long
•• Weighs only 7.7 lbs. with battery for reduced operator fatigue
•• Large 2-finger variable speed trigger for added convenience

XRH03T 18V LXT® Lithium‑Ion Cordless 7/8” Rotary Hammer Kit, accepts
SDS‑PLUS bits (5.0Ah)

•• Max. Capacity (concrete drilling) : 7/8” •• Makita-built variable speed motor delivers 0-1,200 RPM and
•• Optimum Range (concrete drilling) : 5/32” - 1/2” 0-4,000 BPM
•• Impact Energy (ft.lbs.) : 1.4
•• Impact Energy (Joules) : 1.9 J •• 3-mode operation for “Rotation Only”, “Hammering with
•• Blows Per Minute (variable speed) : 0 - 4,000 BPM Rotation” or “Hammering Only” for multiple applications
•• No Load Speed (variable speed) : 0 - 1,200 RPM
•• Vibration Control : No •• Large 2-finger variable speed trigger for added convenience
•• Vibration (m/s²) : 14.5 •• Faster drilling with synchronized RPM and BPM
•• Battery : 18V LXT® Lithium-Ion •• Torque limiting clutch reduces gear damage by automatically
•• Overall Length : 14-1/8”
•• Net Weight (with battery) : 7.7 lbs. disengaging gears if bit binds
•• Bit Type : Accepts SDS-PLUS •• Job site tested shock absorbent handle protects the battery
•• Power Type : Cordless
•• Shipping Weight : 16 lbs. housing for extra durability
•• UPC Code : 088381-834292 •• One-touch sliding chuck for quick bit changes
•• Chisel rotates 360° with 40 different positions
•• Compact and ergonomic design at only 14-1/8” long
•• Weighs only 7.7 lbs. with battery for reduced operator fatigue

XRH06RB 18V LXT® Lithium‑Ion Sub‑Compact Brushless Cordless 11/16” Rotary Hammer Kit,
accepts SDS‑PLUS bits, 65 Pc. Accessory Set (2.0 Ah)

•• Max. Capacity (concrete drilling) : 11/16” •• Brushless motor delivers 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules
•• Optimum Range (concrete drilling) : 5/32” - 3/8” of impact energy for faster drilling
•• Impact Energy (ft.lbs.) : .88
•• Impact Energy (Joules) : 1.2 J •• Compact and Ergonomic design at only 10-3/4”
•• Blows Per Minute (variable speed) : 0 - 4,800 BPM •• Weighs only 4.6 lbs. with battery for reduced operator fatigue
•• No Load Speed (variable speed) : 0 - 680 RPM •• Vibration absorbing handle moves independently of the motor and hammer
•• Vibration Control : Yes
•• Vibration (m/s²) : 9 mechanism for increased operator comfort
•• Battery : 18V LXT® Compact Lithium-Ion •• For dust management use Dust Extraction Cup Set (199245-6) which includes
•• Overall Length : 10-3/4”
•• Net Weight : 4.6 lbs. Side Handle, Spacer, Side Handle Base and Bolt
•• Bit Type : Accepts SDS-PLUS •• The electronically-controlled BL™ Brushless Motor efficiently uses energy to
•• Power Type : Cordless
•• Shipping Weight : 7.7 lbs. match torque and RPM to the changing demands of the application
•• UPC Code : 088381-850681 •• Efficient BL™ Brushless motor is electronically controlled to optimize battery

energy use for up to 50% longer run time per charge
•• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor

to run cooler and more efficiently for longer life
•• 2-Mode operation for “Rotation Only” or “Hammering with Rotation” for

multiple applications
•• Variable speed trigger enables user to match the speed to application for

greater versatility

194 HPIONLINE®.COM

TOOLS: IMPACT DRIVERS

XDT12T 18V LXT® Lithium‑Ion Brushless Cordless Quick‑Shift Mode™
4‑Speed Impact Driver Kit (5.0Ah)

•• Hex Shank : 1/4” •• Quick-Shift Mode™ uses the brushless motor’s electronic controls to find
•• No Load Speed (var. 4 spd.) : 0 - 1,100 / 0 - 2,100 / 0 - 3,200 / 0 - the best balance of speed and torque for each application for more efficient
fastening
3,600 RPM
•• Impacts Per Minute (var. 4 spd.) : 0 - 1,100 / 0 - 2,600 / 0 - 3,600 / •• BL™ Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max
Torque
0 - 3,800 IPM
•• Maximum Torque (in.lbs./N•m) : 1,550 in.lbs./175N•m •• 4-speed power selection switch (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM &
•• Battery : 18V LXT® Lithium-Ion 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a
•• Overall Length : 4-5/8” wide range of applications
•• Net Weight (with battery) : 3.3 lbs.
•• Speed power selection : 4 •• Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross
•• Power Type : Cordless threading” by driving at low speed until tightening begins
•• Shipping Weight : 12.4 lbs.
•• UPC Code : 088381-827478 •• Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps
prevent damage to the screw or workpiece

•• Compact and ergonomic design at only 4-5/8” long
•• Weighs only 3.3 lbs. with battery for reduced operator fatigue
•• Efficient BL™ Brushless motor is electronically controlled to optimize battery

energy use for up to 50% longer run time per charge
•• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor

to run cooler and more efficiently for longer life
•• The electronically-controlled BL™ Brushless Motor efficiently uses energy to

match torque and RPM to the changing demands of the application

XDT14R 18V LXT® Lithium‑Ion Compact Brushless Cordless Quick‑Shift Mode™
3‑Speed Impact Driver Kit (2.0Ah)

•• Hex Shank : 1/4” •• Quick-Shift Mode™ uses the brushless motor’s electronic controls to find TOOLS: IMPACT DRIVERS
•• No Load Speed (var. 3 spd.) : 0 - 1,100 / 0 - 2,100 / the best balance of speed and torque for each application for more efficient
fastening
0 - 3,600 RPM
•• Impacts Per Minute (var. 3 spd.) : 0 - 1,100 / 0 - 2,600 •• Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps
prevent damage to the screw or workpiece
/ 0 - 3,800 IPM
•• Maximum Torque (in.lbs./N•m) : 1,550 •• 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 /
0-2,600 / 0-3,800 IPM) provides precise fastening control for a wide range of
in.lbs./175N•m applications
•• Battery : 18V LXT® Compact Lithium-Ion
•• Overall Length : 4-5/8” •• BL™ Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max
•• Net Weight (with battery) : 2.7 lbs. Torque
•• Speed power selection : 3
•• Power Type : Cordless •• Efficient BL™ Brushless motor is electronically controlled to optimize battery
•• Shipping Weight : 17 lbs. energy use for up to 50% longer run time per charge
•• UPC Code : 088381-824217
•• The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor
to run cooler and more efficiently for longer life

•• The electronically-controlled BL™ Brushless Motor efficiently uses energy to
match torque and RPM to the changing demands of the application

•• Features Extreme Protection Technology (XPT™) which is engineered to provide
increased dust and water resistance in harsh job site conditions

•• Compact and ergonomic design at only 4-5/8” long
•• Weighs only 2.7 lbs. with battery for reduced operator fatigue

XDT131 18V LXT® Lithium‑Ion Brushless Cordless Impact Driver Kit (3.0Ah)

•• Hex Shank : 1/4” •• BL™ Brushless Motor delivers 1,500 in.lbs. of Max Torque
•• No Load Speed (variable speed) : 0 - 3,400 RPM •• Variable speed (0-3,400 RPM & 0-3,600 IPM) for a wide range of
•• Impacts Per Minute (variable speed) : 0 - 3,600 IPM
•• Maximum Torque (in.lbs./N•m) : 1,500 in.lbs./170N•m fastening applications
•• Battery : 18V LXT® Lithium-Ion •• The BL™ Brushless Motor eliminates carbon brushes, enabling
•• Overall Length : 5”
•• Net Weight (with battery) : 3.3 lbs. the BL™ Motor to run cooler and more efficiently for longer life
•• Speed power selection : 1 •• Efficient BL™ Brushless Motor is electronically controlled to
•• Power Type : Cordless
•• Shipping Weight : 7.1 lbs. optimize battery energy use for up to 50% longer run time per
•• UPC Code : 088381-848695 charge
•• The electronically-controlled BL™ Brushless Motor efficiently uses
energy to match torque and RPM to the changing demands of the
application
•• Compact and ergonomic design at only 5” long
•• Weighs only 3.3 lbs. with battery for reduced operator fatigue
•• Convenient 1/4” hex chuck for quick bit changes
•• Built-in dual L.E.D. lights illuminate the work area
•• Rubberized soft grip provides increased comfort on the job

XDT15RB 18V LXT® Lithium‑Ion Sub‑Compact Brushless Cordless Impact Driver Kit (2.0Ah)

•• Hex Shank : 1/4” •• Compact and ergonomic design at only 5-5/16”
•• No Load Speed (var. 2 spd) : 0 - 1,300 / 0 - 3,000 RPM •• Weighs only 2.6 lbs. with battery for reduced operator fatigue
•• Impacts Per Minute (var. 2 spd.) : 0 - 1,600 / 0 - 3,900 IPM •• Ideal for working in tight spaces
•• Maximum Torque (in.lbs./N•m) : 1,240 in.lbs./140N•m •• Variable 2-speed (0-1,300/0-3,000 RPM & 0-1,600/0-3,900 IPM) for a
•• Battery : 18V LXT® Compact Lithium-Ion
•• Overall Length : 5-5/16” wide range of fastening applications
•• Net Weight (with battery) : 2.6 lbs. •• Assist Mode (A-mode) feature helps eliminate “screw cam-out”
•• Speed power selection : 2
•• Power Type : Cordless and “cross threading” by driving at low speed until tightening
•• Shipping Weight : 10.3 lbs. begins
•• UPC Code : 088381-841764 •• BL™ Brushless Motor delivers 1,240 in.lbs. of Max Torque in an
ultra compact design
•• Dual L.E.D. lights illuminate the work area
•• Ergonomically designed handle with rubberized soft grip provides
increased comfort
•• Efficient BL™ Brushless motor is electronically controlled to
optimize battery energy use for up to 50% longer run time per
charge
•• The BL™ Brushless Motor eliminates carbon brushes, enabling
the BL Motor to run cooler and more efficiently for longer life

1-800-778-2217 195

TOOLS: MULTI-TOOLS AND NIBBLERS

TOOLS: MULTI-TOOLS AND NIBBLERS TM3010CX1 Multi‑Tool Kit

•• Oscillations Per Minute : 6,000 - 20,000 •• Powerful 3.0 AMP motor with soft start feature for smooth start-
OPM ups and improved performance for fast cutting, sanding, scraping
and grout removal
•• Oscillation Angle : 3.2°
•• AMPS : 3 •• Variable speed control dial (6,000-20,000 OPM) enables user to
•• Overall Length : 11-1/8” match the speed to the application
•• Net Weight : 3.5 lbs.
•• Variable speed control dial : Yes •• Electronic speed control maintains constant speed under load for
•• Includes Universal Accessory Adaptor smoother, higher-quality work

: Yes •• 3.2° oscillation angle engineered for faster cutting and sanding
•• Soft start : Yes •• Precision engineered for reduced vibration (6.5m/s²) and low
•• Tool-less blade change : Yes
•• Power Type : Corded noise 80dB(A)
•• Shipping Weight : 8.8 lbs. •• Small diameter barrel grip for improved handling and added
•• UPC Code : 088381-651066
operator comfort
XMT035 •• Large on/off slide switch with lock-on button for operator

convenience
•• Clamp system provides 12 tightening settings; one every 30° (0°

to 360°)
•• Includes adapters to fit most competitive accessories
•• Ideal for wood flooring, tile, plaster, sheetrock, wood, PVC and a

variety of other applications

18V LXT® Lithium‑Ion Cordless Multi‑Tool Kit (3.0Ah)

•• Oscillations Per Minute : 6,000 - 20,000 OPM •• 18V LXT® Lithium-Ion battery provides up to 20 minutes of
•• Oscillation Angle : 3.2° continuous run time
•• Battery : 18V LXT® Lithium-Ion
•• Overall Length : 13-3/8” •• Variable speed control dial (6,000-20,000 OPM) enables user to
•• Net Weight (with battery) : 4.9 lbs. match the speed to the application
•• Variable speed control dial : Yes
•• Includes Universal Accessory Adaptor : Yes •• 3.2° oscillation angle engineered for faster, more aggressive
•• Soft start : Yes cutting and sanding
•• Tool-less blade change : Yes
•• Power Type : Cordless •• Large on/off slide switch with lock-on button for operator
•• Shipping Weight : 14.33 lbs. convenience
•• UPC Code : 088381-667715
•• Includes adapters to fit most competitive accessories
•• Small diameter barrel grip (only 2-3/8”) for easy handling
•• Battery capacity warning system turns on indicator light and is

engineered to automatically stop motor to notify user when it is
time to recharge the battery
•• Weighs only 4.9 lbs. with battery for reduced operator fatigue
•• Soft start feature for smooth start-ups
•• Ideal for wood flooring, tile, plaster, sheetrock, wood, PVC and a
variety of other applications

JN3201 10 Gauge Nibbler

•• Capacity (aluminum, ga.) : 10 ga. •• Less noise at 81 dB(A) for continuous operation
•• Capacity (mild steel, ga.) : 10 ga. •• Well balanced with a rubberized soft grip handle for
•• Capacity (stainless, ga.) : 13 ga.
•• Cutting Radius (inner edge) : 4-3/4” greater comfort
•• Cutting Radius (outer edge) : 5-1/16” •• Built-in thickness gauge for added convenience
•• Strokes Per Minute : 1,300 SPM •• Refined design at only 7.4 lbs.
•• AMPS : 6.2 •• Lock-on switch for continuous operation
•• Overall Length : 8-1/2” •• Ideal for metal cutting up to 10 gauge mild steel and 13
•• Net Weight : 7.5 lbs.
•• Power Type : Corded gauge stainless steel
•• Shipping Weight : 8.8 lbs. •• Highly visible line-of-sight for precise pattern
•• UPC Code : 088381-637770
following
JN1601 •• Convenient chip disposal below cutting material to

•• Capacity (aluminum, ga.) : 10 ga. minimize damage to cutting surface
•• Capacity (mild steel, ga.) : 16 ga. •• Small cutting radius (4-3/4” inner edge, 5-1/16” outer
•• Capacity (stainless, ga.) : 18 ga.
•• Cutting Radius (inner edge) : 1-3/4” edge) for precision applications
•• Cutting Radius (outer edge) : 2” •• Easy punch and die replacement for reduced downtime
•• Strokes Per Minute : 2,200 SPM
•• AMPS : 5 on the job
•• Overall Length : 10-1/4”
•• Net Weight : 3.6 lbs. 16 Gauge Nibbler
•• Power Type : Corded
•• Shipping Weight : 5.28 lbs. •• For clean and precise work in keystone plate, deck plate
•• UPC Code : 088381-015448 and other sheet materials

•• Slim and ergonomic body design for easy gripping
•• Die rotates 360°; large 1/4” stroke
•• Extremely light (weighs only 3.6 lbs.) for easier

handling
•• Small circumference barrel grip design
•• Lock-on sliding switch for continuous operation
•• Built-in thickness gauge for convenience
•• Easy punch and die replacement for reduced down

time
•• Externally accessible carbon brushes for greater

serviceability
•• Double insulated

196 HPIONLINE®.COM

TOOLS: PLANERS

XNJ01T 18V LXT® Lithium‑Ion Cordless 16 Gauge Nibbler Kit (5.0Ah)

•• Capacity (aluminum, ga.) : 12 ga. •• Makita-built motor delivers 1,900 SPM for faster and smooth
•• Capacity (mild steel, ga.) : 16 ga. cutting
•• Capacity (stainless, ga.) : 18 ga.
•• Cutting Radius (inner edge) : 1-3/4” •• Ideal for cutting roofing sheet metal at thicknesses up to 16
•• Cutting Radius (outer edge) : 2” gauge
•• Strokes Per Minute (variable speed) :
•• Die holder rotates 360° to meet demands of cutting direction
0 - 1,900 SPM •• Convenient chip disposal is below cutting material to minimize
•• Battery : 18V LXT® Lithium-Ion
•• Overall Length : 12-3/8” damage to cutting surface
•• Net Weight (with battery) : 4.8 lbs. •• Cutting radius: inner edge 1-3/4”; outer edge 2”
•• Power Type : Cordless •• Battery capacity warning system turns light solid red and
•• Shipping Weight : 13.3 lbs.
•• UPC Code : 088381-834278 automatically stops motor to notify user that battery needs to
be replaced
•• Anti-restart protection prevents motor start up when battery is
inserted with switch locked on
•• Rubberized soft grip for improved comfort
•• Lock-on sliding switch for continuous operation
•• Built-in thickness gauge for convenience

PC5000C 5” Concrete Planer

•• Wheel Diameter : 5” •• Powerful 10 AMP motor delivers more output and 10,500 RPM TOOLS: PLANERS
•• No Load Speed : 10,000 RPM •• Constant Speed Control automatically applies additional power to
•• AMPS : 10
•• Overall Length : 17-1/8” the motor to maintain speed under load
•• Net Weight : 8.9 lbs. •• Soft start suppresses start-up reaction for more control and longer
•• Adjustable roller : No
•• Constant speed control : Yes tool life
•• Soft start : Yes •• Electronic current limiter helps protect the motor from
•• Electric current limiter : Yes
•• Shipping Weight : 8.9 lbs. overload
•• UPC Code : 088381-099110 •• Anti-restart prevents accidental start up after power loss
•• Large two-finger trigger switch with lock-on for continuous

operation
•• Ergonomic soft grip handle provides increased comfort on the

job
•• Easy to install/remove dust bag for cleaner operation
•• Externally accessible carbon brushes for greater serviceability
•• Removable dust shroud cap for flush-to-wall planing

PC5001C 5” Concrete Planer

•• Wheel Diameter : 5” •• Powerful 10.0 AMP motor delivers more output and 10,500
•• No Load Speed : 10,000 RPM RPM
•• AMPS : 10
•• Overall Length : 18-13/16” •• Constant Speed Control automatically applies additional power
•• Net Weight : 11.2 lbs. to the motor to maintain speed under load
•• Adjustable roller : Yes
•• Constant speed control : Yes •• Soft start suppresses start-up reaction for more precision and
•• Soft start : Yes longer tool life
•• Electric current limiter : Yes
•• Shipping Weight : 26.5 lbs. •• Electronic current limiter helps protect the motor from
•• UPC Code : 088381-099134 overload

1002BA •• Anti-restart prevents accidental start up after power loss
•• Large two-finger trigger switch with lock-on for continuous
•• Planing Width : 4-3/8”
•• Planing Depth : 3/16” operation
•• No Load Speed : 15,000 RPM •• Ergonomic soft grip handle provides increased comfort on the
•• AMPS : 9.6
•• Overall Length : 13-11/32” job
•• Net Weight : 11.4 lbs. •• Easy to install/remove dust bag for cleaner operation
•• Max. no load speed : 15,000 RPM •• Externally accessible carbon brushes for greater
•• Power Type : Corded
•• Shipping Weight : 15.4 lbs. serviceability
•• UPC Code : 088381-007511 •• Removable dust shroud cap for flush-to-wall planing

4‑3/8” Curved Base Planer

•• Powerful 9.6 AMP motor with 15,000 RPM for improved
performance

•• Precision machined base for notching out logs at a 12-
5/8” curved radius

•• Planes 4-3/8” width and 3/16” deep in a single pass
•• Large ejection chute for high rate of chip discharge
•• Conveniently located front and rear grips for operator

control
•• Lock-on button for continuous operation
•• Smoothes and notches out logs for a perfect fit
•• Adjustable bevel radius to 11-13/16”
•• Large conveniently located depth settings knob for easy

adjustments
•• Ideal for planning curved lumber and other radius

materials

1-800-778-2217 197

TOOLS: PLANERS

KP0800KTOOLS: PLANERS 3‑1/4” Planer 3‑1/4” Planer, with Tool Case

•• Planing Width : 3-1/4” •• 6.5 AMP motor delivers more output power for increased stock
•• Planing Depth : 3/32” removal and superior finishes
•• No Load Speed : 17,000 RPM
•• AMPS : 6.5 •• Planes up to 3-1/4” wide and 3/32” deep in a single pass
•• Overall Length : 11-1/4” •• Two-blade cutter head with 17,000 RPM delivers smooth finish
•• Net Weight : 5.7 lbs.
•• Max. no load speed : 17,000 RPM and fast stock removal
•• Power Type : Corded •• Spring-loaded stand elevates the base to protect the blades and
•• Shipping Weight : 12 lbs.
•• UPC Code : 088381-603935 workpiece
•• Easy blade setting system for fast blade installation
KP0810 •• Precision machined aluminum base for planing accuracy
•• Equipped with double edge carbide blades for added
•• Planing Width : 3-1/4”
•• Planing Depth : 5/32” performance
•• No Load Speed : 16,000 RPM •• Rigid die-cast aluminum housing with all-ball bearing construction
•• AMPS : 7.5
•• Overall Length : 11-3/8” for longer tool life
•• Net Weight : 7.3 lbs. •• High power-to-weight ratio; weighs only 5.7 lbs.
•• Max. no load speed : 16,000 RPM •• Machined aluminum and balanced planer drum for reduced
•• Power Type : Corded
•• Shipping Weight : 10.2 lbs. vibration and added durability
•• UPC Code : 088381-079501
3‑1/4” Planer
XPK01Z
•• Planes up to 3-1/4” wide and 5/32” deep in a single pass
•• Planing Width : 3-1/4” •• Two-blade cutter head with 16,000 RPM delivers smooth finish
•• Planing Depth : 5/64”
•• No Load Speed : 14,000 RPM and fast stock removal
•• Battery : 18V LXT® Lithium-Ion •• Chip ejection can be directed to either side of the tool for
•• Overall Length : 13-1/8”
•• Net Weight (with battery) : 17.4 lbs. convenience
•• Max. no load speed : 14,000 RPM •• Depth adjust knob features an easy-to-read scale with click stops
•• Power Type : Cordless
•• Shipping Weight : 7.5 lbs. in 0.1mm increments for precise depth adjustment
•• UPC Code : 088381-662673 •• Conveniently located lock-on/off button can be operated from

1912B either side of handle
•• Ergonomically designed rubberized grip and depth adjustment
•• Planing Width : 4-3/8”
•• Planing Depth : 1/16” knob for comfort and control
•• No Load Speed : 16,000 RPM •• Front base features 3 chamfering groove options: approximately
•• AMPS : 7.5
•• Overall Length : 14” 1.4 mm, 3 mm and 4 mm
•• Net Weight : 9.3 lbs. •• Rigid die-cast aluminum housing supports planer drum for
•• Max. no load speed : 16,000 RPM
•• Power Type : Corded increased durability
•• Shipping Weight : 10.9 lbs. •• Spring-loaded stand elevates the base to protect the blades and
•• UPC Code : 088381-016117
workpiece
198 •• Powerful with less weight (7.5 AMP motor; 7.3 lbs.)

18V LXT® Lithium‑Ion Cordless 3‑1/4” Planer, Tool Only

•• 2-blade cutter head with double edge carbide blades for added
performance and smooth finish

•• High power-to-weight ratio; weighs only 7.4 lbs. with battery
(battery not included)

•• 14,000 RPM motor engineered for faster stock removal
•• Click depth adjustment knob with easy-to-read scale with settings

from 0” to 5/64” for precise depth adjustment
•• Spring-loaded stand elevates the base to protect the blades and

workpiece
•• Precision machined aluminum base for planing accuracy
•• Ergonomically centered balance with rubberized soft grips on the

front and rear handles for increased comfort on the job
•• Easy blade setting system for fast blade installation
•• Electric brake for maximum productivity
•• Equipped with Star Protection Computer Controls™ to protect

against overloading, over-discharging and over-heating

4‑3/8” Planer

•• Powerful 7.5 AMP motor for improved performance
•• Two-blade cutter head with 16,000 RPM delivers smooth

finish and fast stock removal
•• Lock-on button for continuous operation
•• V-groove on front shoe for easy chamfer cutting
•• Precision machined aluminum base for planing

accuracy
•• Planes up to 4-3/8” wide and 1/16” deep in a single

pass
•• Professional quality planer in small and compact

design
•• All-ball bearing construction for longer tool life
•• Centerline balance with D-handle grip for easy

operation
•• Double insulated

HPIONLINE®.COM