Haas Pricelist PDF

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRT210M

Material List Price Currency

Fixturing QuikChange Plate and Support, for use with 995.00 USD
QuikChange System 695.00 USD
PLATE_KIT A-Frame Support, Plain Bearing, 7" (178 795.00 USD
mm) center height 695.00 USD
SUP5XP A-Frame Support, Needle Bearing, 7" (178 1,595.00 USD
mm) center height 2,695.00 USD
SUP5XR A-Frame Support, 6" (152mm) center height
Complete Tooling Block System, 12" (305 795.00 USD
SUP6 mm) long x 4.5" (114 mm) square
TBS-210 Complete Tooling Block System, 20" (508 95.00 USD
mm) long x 4.5" (114 mm) square 95.00 USD
TBS-210-20 95.00 USD
28.5' (8.7 m) Extended Cable for HRT210 95.00 USD
Cables and smaller
2,495.00 USD
EXB8-28 CNC Interface Cable, 15 ft (4.6 m) 2,495.00 USD
CNC Interface Cable for Haas machines
Interfaces CNC Interface Cable, 30 ft (9.1 m)
Remote Quill Switch
CNC
CNC-VF1 Single-Axis Rotary Control
CNC30 Single-Axis Rotary Control, CE
RQS

Servo Control

SCOL
SCOLC

HRT210M

* Not available for field installation Page: 351

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT310 USD
List Price

14,995.00

310 mm (12.2") Servo Rotary Table. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a rotary control box for
stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 1,795.00 USD
1,495.00 USD
Options 1,195.00 USD

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 695.00 USD
tables; provides up to 50% more brake 1,195.00 USD
torque USD
695.00 USD
Chucks 2,195.00

LC10-B 10" (254 mm) Top Reversible, 3-Jaw Chuck

Tail Stock

HPTS9 Pneumatic Tailstock, 9" (229 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

HTS9 Manual Tailstock, 9" (229 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

Fixturing

ADP9 Adapter Plate for Tooling Block on HRT310

BLK9-16 Aluminum Tombstone, 6" x 6" x 19" (152 x
152 x 483 mm)

SUP9 A-Frame Support, 9" (229 mm) center
height

TBS-310 Complete Tooling Block System, 19" (483
mm) long x 6" (152 mm) square

HRT310

* Not available for field installation Page: 352

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRT310

Material List Price Currency

Cables 28.5' (8.7 m) Extended Cable for HRT310 795.00 USD
and larger
EXB9-28 95.00 USD
CNC Interface Cable, 15 ft (4.6 m) 95.00 USD
Interfaces CNC Interface Cable for Haas machines 95.00 USD
CNC Interface Cable, 30 ft (9.1 m) 95.00 USD
CNC Remote Quill Switch
CNC-VF1 2,495.00 USD
CNC30 Single-Axis Rotary Control 2,495.00 USD
RQS Single-Axis Rotary Control, CE

Servo Control

SCOL
SCOLC

HRT310

* Not available for field installation Page: 353

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT450 USD
List Price

23,995.00

450 mm (17.7") Servo Rotary Table. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a rotary control box for
stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 1,695.00 USD
Haas mill with software version 17.xx or 1,395.00 USD
earlier.
795.00 USD
Tail Stock
95.00 USD
HPTS11.5 Pneumatic Tailstock, 11.5" (292 mm) center 95.00 USD
height, Morse taper #3. Live centers 95.00 USD
recommended, but not included. 95.00 USD
2,495.00 USD
HTS11.5 Manual Tailstock, 11.5" (292 mm) center 2,495.00 USD
height, Morse taper #3. Live centers
recommended, but not included.

Cables

EXB9-28 28.5' (8.7 m) Extended Cable for HRT310
and larger

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

Servo Control

SCOL Single-Axis Rotary Control

SCOLC Single-Axis Rotary Control, CE

HRT450

* Not available for field installation Page: 354

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT600 USD
List Price

32,995.00

600 mm (23.6") Servo Rotary Table. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a rotary control box for
stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 1,695.00 USD
Haas mill with software version 17.xx or 1,395.00 USD
earlier.
795.00 USD
Tail Stock
95.00 USD
HPTS14.5 Pneumatic Tailstock, 14.5" (368 mm) center 95.00 USD
height, Morse taper #3. Live centers 95.00 USD
recommended, but not included. 95.00 USD
2,495.00 USD
HTS14.5 Manual Tailstock, 14.5" (368 mm) center 2,495.00 USD
height, Morse taper #3. Live centers
recommended, but not included.

Cables

EXB9-28 28.5' (8.7 m) Extended Cable for HRT310
and larger

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

Servo Control

SCOL Single-Axis Rotary Control

SCOLC Single-Axis Rotary Control, CE

HRT600

* Not available for field installation Page: 355

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT160-2 USD
List Price

19,995.00

160 mm (6.3") Dual-Spindle Rotary Table, 10" (254 mm) center distance. Requires Haas mill with 4th-axis drive for full 4th-axis
operation, or a rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 2,790.00 USD
990.00 USD
Options 795.00 USD

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 95.00 USD
tables; provides up to 50% more brake 95.00 USD
torque 95.00 USD
95.00 USD
Chucks 2,495.00 USD
2,495.00 USD
LC6-B 6" (152 mm) Top Reversible, 3-Jaw Chuck

Fixturing

ADP5 Adapter Plate for Tooling Block on HRT160

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

Servo Control

SCOL Single-Axis Rotary Control

SCOLC Single-Axis Rotary Control, CE

HRT160-2

* Not available for field installation Page: 356

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT210-2 USD
List Price

23,995.00

210 mm (8.3") Dual-Spindle Servo Rotary Table, 12" (305 mm) center distance. Cannot be operated laying on its back.
Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a rotary control box for stand-alone operation. Requires a
Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 3,190.00 USD
1,190.00 USD
Options USD
795.00
BRAKE BOOSTER Rotary Brake Booster for Haas rotary USD
tables; provides up to 50% more brake 95.00 USD
torque 95.00 USD
95.00 USD
Chucks 95.00 USD
2,495.00 USD
LC8-B 8" (203 mm) Top Reversible, 3-Jaw Chuck 2,495.00

Fixturing

ADP6 Adapter Plate for Tooling Block on HRT210

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

Servo Control

SCOL Single-Axis Rotary Control

SCOLC Single-Axis Rotary Control, CE

HRT210-2

* Not available for field installation Page: 357

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT160SP USD
List Price

9,995.00

160 mm (6.3") Servo Rotary Table with wraparound motor. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a
rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 1,395.00 USD
1,495.00 USD
Options 1,195.00 USD

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 495.00 USD
tables; provides up to 50% more brake 795.00 USD
torque 595.00 USD
1,395.00 USD
Chucks

LC6-B 6" (152 mm) Top Reversible, 3-Jaw Chuck

Tail Stock

HPTS5 Pneumatic Tailstock, 5" (127 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

HTS5 Manual Tailstock, 5" (127 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

Fixturing

ADP5 Adapter Plate for Tooling Block on HRT160

BLK5-12 Aluminum Tombstone, 4" x 4" x 12" (102 x
102 x 305 mm)

SUP5 A-Frame Support, 5" (127 mm) center
height

TBS-160 Complete Tooling Block System, 12" (305
mm) long x 4" (102 mm) square

HRT160SP

* Not available for field installation Page: 358

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRT160SP

Material List Price Currency

Cables 28.5' (8.7 m) Extended Cable for HRT210 795.00 USD
and smaller
EXB8-28 95.00 USD
CNC Interface Cable, 15 ft (4.6 m) 95.00 USD
Interfaces CNC Interface Cable for Haas machines 95.00 USD
CNC Interface Cable, 30 ft (9.1 m) 95.00 USD
CNC Remote Quill Switch
CNC-VF1 2,495.00 USD
CNC30 Single-Axis Rotary Control 2,495.00 USD
RQS Single-Axis Rotary Control, CE

Servo Control

SCOL
SCOLC

HRT160SP

* Not available for field installation Page: 359

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT160SS USD
List Price

10,495.00

160 mm (6.3") Super-Speed Servo Rotary Table with 570 deg/sec indexing. Requires Haas mill with 4th-axis drive. Mills built
before 1/1/2011 require software version 17.06C or later; mills built after 1/1/2011 require software version 18.01A or later. Not
available for stand-alone operation.

Chucks 6" (152 mm) Top Reversible, 3-Jaw Chuck 1,395.00 USD
1,495.00 USD
LC6-B Pneumatic Tailstock, 5" (127 mm) center
height, Morse taper #3. Live centers 1,195.00 USD
Tail Stock recommended, but not included.
Manual Tailstock, 5" (127 mm) center 495.00 USD
HPTS5 height, Morse taper #3. Live centers 795.00 USD
recommended, but not included. 595.00 USD
HTS5 1,395.00 USD
Adapter Plate for Tooling Block on HRT160
Fixturing Aluminum Tombstone, 4" x 4" x 12" (102 x
102 x 305 mm)
ADP5 A-Frame Support, 5" (127 mm) center
BLK5-12 height
Complete Tooling Block System, 12" (305
SUP5 mm) long x 4" (102 mm) square

TBS-160

HRT160SS

* Not available for field installation Page: 360

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT210SP USD
List Price

11,495.00

210 mm (8.3") Servo Rotary Table with wraparound motor. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a
rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 1,595.00 USD
1,495.00 USD
Chucks
1,195.00 USD
LC8-B 8" (203 mm) Top Reversible, 3-Jaw Chuck
595.00 USD
Tail Stock 995.00 USD
1,795.00 USD
HPTS6 Pneumatic Tailstock, 6" (152 mm) center 695.00 USD
height, Morse taper #3. Live centers 1,595.00 USD
recommended, but not included.

HTS6 Manual Tailstock, 6" (152 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

Fixturing

ADP6 Adapter Plate for Tooling Block on HRT210

BLK6-12 Aluminum Tombstone, 4.5" x 4.5" x 12"
(114 x 114 x 305 mm)

BLK6-20 Aluminum Tombstone, 4.5" x 4.5" x 20"
(114 x 114 x 508 mm)

SUP6 A-Frame Support, 6" (152mm) center height

TBS-210 Complete Tooling Block System, 12" (305
mm) long x 4.5" (114 mm) square

HRT210SP

* Not available for field installation Page: 361

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRT210SP

Material List Price Currency

Fixturing Complete Tooling Block System, 20" (508 2,695.00 USD
mm) long x 4.5" (114 mm) square
TBS-210-20 795.00 USD
28.5' (8.7 m) Extended Cable for HRT210
Cables and smaller 95.00 USD
95.00 USD
EXB8-28 CNC Interface Cable, 15 ft (4.6 m) 95.00 USD
CNC Interface Cable for Haas machines 95.00 USD
Interfaces CNC Interface Cable, 30 ft (9.1 m)
Remote Quill Switch 2,495.00 USD
CNC 2,495.00 USD
CNC-VF1 Single-Axis Rotary Control
CNC30 Single-Axis Rotary Control, CE
RQS

Servo Control

SCOL
SCOLC

HRT210SP

* Not available for field installation Page: 362

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRT310SP USD
List Price

15,995.00

310 mm (12.2") Servo Rotary Table with wraparound motor. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or
a rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 1,795.00 USD
1,495.00 USD
Options 1,195.00 USD

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 695.00 USD
tables; provides up to 50% more brake 1,195.00 USD
torque USD
695.00 USD
Chucks 2,195.00

LC10-B 10" (254 mm) Top Reversible, 3-Jaw Chuck

Tail Stock

HPTS9 Pneumatic Tailstock, 9" (229 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

HTS9 Manual Tailstock, 9" (229 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

Fixturing

ADP9 Adapter Plate for Tooling Block on HRT310

BLK9-16 Aluminum Tombstone, 6" x 6" x 19" (152 x
152 x 483 mm)

SUP9 A-Frame Support, 9" (229 mm) center
height

TBS-310 Complete Tooling Block System, 19" (483
mm) long x 6" (152 mm) square

HRT310SP

* Not available for field installation Page: 363

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRT310SP

Material List Price Currency

Cables 28.5' (8.7 m) Extended Cable for HRT310 795.00 USD
and larger
EXB9-28 95.00 USD
CNC Interface Cable, 15 ft (4.6 m) 95.00 USD
Interfaces CNC Interface Cable for Haas machines 95.00 USD
CNC Interface Cable, 30 ft (9.1 m) 95.00 USD
CNC Remote Quill Switch
CNC-VF1 2,495.00 USD
CNC30 Single-Axis Rotary Control 2,495.00 USD
RQS Single-Axis Rotary Control, CE

Servo Control

SCOL
SCOLC

HRT310SP

* Not available for field installation Page: 364

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRTA5 USD
List Price

10,495.00

Rotary Table with A1-5 Spindle Nose (draw tube not available). Requires Haas mill with 4th-axis drive for full 4th-axis operation,
or a rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 1,395.00 USD
USD
Chucks 1,495.00 USD
1,195.00
LC6A5-B 6" (152 mm) A1-5 Top Reversible, 3-Jaw USD
chuck 795.00 USD
USD
Tail Stock 95.00 USD
95.00 USD
HPTS5 Pneumatic Tailstock, 5" (127 mm) center 95.00
height, Morse taper #3. Live centers 95.00 Page: 365
recommended, but not included.

HTS5 Manual Tailstock, 5" (127 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

HRTA5

* Not available for field installation

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRTA5

Material List Price Currency

Servo Control Single-Axis Rotary Control 2,495.00 USD
Single-Axis Rotary Control, CE 2,495.00 USD
SCOL
SCOLC

HRTA5

* Not available for field installation Page: 366

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
HRTA6 USD
List Price

11,995.00

Rotary Table with A1-6 Spindle Nose (draw tube not included). Requires Haas mill with 4th-axis drive for full 4th-axis operation,
or a rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 1,295.00 USD
1,295.00 USD
Options USD
795.00 USD
BRAKE BOOSTER Rotary Brake Booster for Haas rotary 795.00 USD
tables; provides up to 50% more brake 1,295.00 USD
torque 1,395.00
USD
A6 Accessories 1,595.00
USD
A616C 16C Collet Chuck for HRTA6 1,495.00

A65C 5C Collet Chuck for HRTA6

FP11 11" Faceplate for HRTA6

FP8 8" Faceplate for HRTA6

HQCA6KIT QuikChange Adapter, A6 Mount for HRTA6

Collet Closers

A6AC A6AC Air Collet Closer, pneumatic
draw-tube assembly, 1.75" (44.5 mm) ID
through-hole.

Chucks

LC8A6-B 8" (203 mm) A1-6 Top Reversible, 3-Jaw
Chuck

Tail Stock

HPTS6 Pneumatic Tailstock, 6" (152 mm) center
height, Morse taper #3. Live centers
recommended, but not included.

HRTA6

* Not available for field installation Page: 367

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: HRTA6

Material List Price Currency

Tail Stock Manual Tailstock, 6" (152 mm) center 1,195.00 USD
height, Morse taper #3. Live centers
HTS6 recommended, but not included. 495.00 USD
4,095.00 USD
Fixturing Extra 4.55" (116 mm) QuikChange Cube for USD
use with QuikChange System 495.00 USD
CUBE QuikChange System for HRTA6; cubes and 995.00
plates not included USD
HQCCSA6 QuikChange Plate Only, 8" x 10" x 1" (203 x 795.00
254 x 25 mm) USD
PLATE QuikChange Plate and Support, for use with 95.00 USD
QuikChange System 95.00 USD
PLATE_KIT 95.00 USD
28.5' (8.7 m) Extended Cable for HRT210 95.00 USD
Cables and smaller 2,495.00 USD
2,495.00
EXB8-28 CNC Interface Cable, 15 ft (4.6 m)
CNC Interface Cable for Haas machines
Interfaces CNC Interface Cable, 30 ft (9.1 m)
Remote Quill Switch
CNC
CNC-VF1 Single-Axis Rotary Control
CNC30 Single-Axis Rotary Control, CE
RQS

Servo Control

SCOL
SCOLC

HRTA6

* Not available for field installation Page: 368

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
T5C USD
List Price

21,995.00

5C Collet Tilting 2-Axis Rotary. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis operation. This unit has
no collet closing capability as standard. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 1,395.00 USD
1,695.00 USD
Collet Closers USD
595.00
AC-25 AC-25 Compact Air-Collet Closer, non USD
through-hole. Includes one closer for each 1,095.00 USD
head on multi-head units. 1,590.00 USD
USD
AC125 AC-125 High-Torque Air Collet Closer with 95.00
5/16" (8 mm) through-hole. Includes one 95.00 Page: 369
closer for each head on multi-head units.

HMDT Manual Draw Tube, 1.10" (28.4 mm)
through-hole. Includes one closer for each
head on multi-head units.

Chucks

LC5C-B 5" (127 mm) Solid Reversible, 3-Jaw Chuck

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

T5C

* Not available for field installation

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: T5C

Material List Price Currency

Interfaces CNC Interface Cable, 30 ft (9.1 m) 95.00 USD
Remote Quill Switch 95.00 USD
CNC30
RQS Single-Axis Rotary Control 2,495.00 USD
Single-Axis Rotary Control, CE 2,495.00 USD
Servo Control

SCOL
SCOLC

T5C

* Not available for field installation Page: 370

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
T5C2 USD
List Price

28,995.00

Dual-Spindle 5C Collet Tilting 2-Axis Rotary. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis
operation. This unit has no collet closing capability as standard. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 2,790.00 USD
3,390.00 USD
Collet Closers 1,190.00 USD

AC-25 AC-25 Compact Air-Collet Closer, non 1,590.00 USD
through-hole. Includes one closer for each USD
head on multi-head units. 95.00 USD
95.00 USD
AC125 AC-125 High-Torque Air Collet Closer with 95.00 USD
5/16" (8 mm) through-hole. Includes one 95.00
closer for each head on multi-head units. Page: 371

HMDT Manual Draw Tube, 1.10" (28.4 mm)
through-hole. Includes one closer for each
head on multi-head units.

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

T5C2

* Not available for field installation

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: T5C2

Material List Price Currency

Servo Control Single-Axis Rotary Control 2,495.00 USD
Single-Axis Rotary Control, CE 2,495.00 USD
SCOL
SCOLC

T5C2

* Not available for field installation Page: 372

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
T5C3 USD
List Price

35,995.00

Triple-Spindle 5C Collet Tilting 2-Axis Rotary. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis
operation. This unit has no collet closing capability as standard. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 4,185.00 USD
5,085.00 USD
Collet Closers 1,785.00 USD

AC-25 AC-25 Compact Air-Collet Closer, non 1,590.00 USD
through-hole. Includes one closer for each USD
head on multi-head units. 95.00 USD
95.00 USD
AC125 AC-125 High-Torque Air Collet Closer with 95.00 USD
5/16" (8 mm) through-hole. Includes one 95.00
closer for each head on multi-head units. Page: 373

HMDT Manual Draw Tube, 1.10" (28.4 mm)
through-hole. Includes one closer for each
head on multi-head units.

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

T5C3

* Not available for field installation

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: T5C3

Material List Price Currency

Servo Control Single-Axis Rotary Control 2,495.00 USD
Single-Axis Rotary Control, CE 2,495.00 USD
SCOL
SCOLC

T5C3

* Not available for field installation Page: 374

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
T5C4 USD
List Price

42,995.00

Quad-Spindle 5C Collet Tilting 2-Axis Rotary. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis
operation. This unit has no collet closing capability as standard. Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a
Haas mill with software version 17.xx or
earlier.

Options

BRAKE BOOSTER Rotary Brake Booster for Haas rotary 895.00 USD
tables; provides up to 50% more brake
torque 5,580.00 USD
6,780.00 USD
Collet Closers 2,380.00 USD

AC-25 AC-25 Compact Air-Collet Closer, non 1,590.00 USD
through-hole. Includes one closer for each USD
head on multi-head units. 95.00 USD
95.00 USD
AC125 AC-125 High-Torque Air Collet Closer with 95.00 USD
5/16" (8 mm) through-hole. Includes one 95.00
closer for each head on multi-head units. Page: 375

HMDT Manual Draw Tube, 1.10" (28.4 mm)
through-hole. Includes one closer for each
head on multi-head units.

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

T5C4

* Not available for field installation

Haas Automation Inc. Date: 12/06/2016
US Customer Price List Time: 11:24:14
Valid: 12/06/2016
Model: T5C4

Material List Price Currency

Servo Control Single-Axis Rotary Control 2,495.00 USD
Single-Axis Rotary Control, CE 2,495.00 USD
SCOL
SCOLC

T5C4

* Not available for field installation Page: 376

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
TRT100 USD
List Price

24,995.00

100 mm (3.9") High-Speed Tilting 2-Axis Rotary Table, with indexing up to 1000 deg/sec. Requires a Haas mill with 4th- and
5th-axis drives for true 4th- and 5th-axis operation. Requires software version M18.24B or later. Not available for stand-alone
operation.

Chucks

MC4 4" (102 mm) 3-Jaw Manual Scroll Chuck 1,295.00 USD

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m) 95.00 USD

CNC-VF1 CNC Interface Cable for Haas machines 95.00 USD

CNC30 CNC Interface Cable, 30 ft (9.1 m) 95.00 USD

RQS Remote Quill Switch 95.00 USD

TRT100

* Not available for field installation Page: 377

Date: 12/06/2016
Time: 11:24:14
Valid: 12/06/2016

Material Haas Automation Inc. Currency
US Customer Price List
TRT160 USD
List Price

27,995.00

160 mm (6.3") Tilting 2-Axis Rotary Table. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis operation.
Requires a Haas mill with software version 18.00 or later.

Standard Features

Servo Control This rotary unit is configured to connect
directly to a Haas mill equipped with
optional axis drives. It does not include a
Haas rotary control unit. A separate Haas
rotary control unit is available at additional
cost.

Drive Motor

SIGMA1 Sigma 1 Servomotor Drive, for use on 2010 1,495.00 USD
or older Haas mills, or with servo control
units built prior to May 2011. Requires a 895.00 USD
Haas mill with software version 17.xx or
earlier. 1,395.00 USD
1,590.00 USD
Options
95.00 USD
BRAKE BOOSTER Rotary Brake Booster for Haas rotary 95.00 USD
tables; provides up to 50% more brake 95.00 USD
torque 95.00 USD
2,495.00 USD
Chucks 2,495.00 USD

LC6-B 6" (152 mm) Top Reversible, 3-Jaw Chuck

Cables

EXB8-28 28.5' (8.7 m) Extended Cable for HRT210
and smaller

Interfaces

CNC CNC Interface Cable, 15 ft (4.6 m)

CNC-VF1 CNC Interface Cable for Haas machines

CNC30 CNC Interface Cable, 30 ft (9.1 m)

RQS Remote Quill Switch

Servo Control

SCOL Single-Axis Rotary Control

SCOLC Single-Axis Rotary Control, CE

TRT160

* Not available for field installation Page: 378