ICE

Page

Page

PRODUCT INDEX

CAT ER COLLET CHUCKS Page -
STRAIGHT SHANK EXTENSIONS Page -
ER COLLETS Page -
ER COLLET KITS Page -
ER COLLETS COOLANT/TAP Page -
COLLET WRENCHES/NUTS Page -
TG COLLETS/HOLDERS Page -
FACE MILL HOLDERS Page -
END MILL HOLDERS Page
DRILL CHUCKS Page -
MILLING CHUCKS Page -
LIVE CENTERS Page -

Page

•Special Surface Treatment:
environmental protection and
anti-rust

• Don't influence precision
•Chuck surface is nickel coated, the nickel
layer is evenly, nickel layer is thin, thickness is
about 3u-5u, this special coating can reduce Spindle
abnormal wear and tear, Don't influence precision.

•Overall nickel coating, including inside and outside cone, •The product without coating is easy to rust, reduces pro-
even if you do not take any anti-rust actions, it will not rust cessing precision, influence the chuck and spindle. The

either, don't influence processing precision and spindle. shank rust can cause run-out of 0.01—0.02 mm.

Page

Material:20CrMnTi or15CrMo;* H a r d n e s s : 5 8 ± •54-57HRC
2 H R C ; *Carbon depth>0.8;* Roughness : Ra<0. 4u

•7:24 taper tolerance A≤3

•Minimize the gap of the protection
band,prevent dust, chips and others get into
the collet, and protect the thread as well.

•Smooth appearance improve dynamic
balance performance G2.5-Max.50000rpm.

*Cryogenic treatment
1.-185℃ long cryogenic, nearly all of the residual austenite into
martensitic;

2.Carbide precipitation of Nanoscale particles, increasing
the hardness and toughness;

1.Reducing residual stresses;

2.Wear resistance significantly improved.

* Thermal aging processing
20h long stereotyped thermal limitation removal of grinding re-
sidual stress.

Page

G6.3:18000rpm

Model No. L L1 D d1 d2 d3 T KGS

CAT40-ER16-2.76" 5.447" 2.76" 1.102" 0.63" M10×1.5P 1.05
CAT40-ER16-4" 6.687" 4" 1.35
CAT40-ER16-6" 8.687" 6" 1.339" 0.788" M12×1.75P 1.65
CAT40-ER16-8" 10.687" 8" 1.85
CAT40-ER20-2.76" 5.447" 1.654" 0.984" M16×2.0P 1.25
CAT40-ER20-4" 6.687" 2.76" 2.5" 1.75" 1.65
CAT40 -ER20 -6” 8.687" 4" 2.12
CAT40-ER25-2.76" 5.447" 6" 1.969" 1.26" M16×2.0P 1.35
CAT40-ER25-4" 6.687" 1.70
CAT40-ER25-6" 8.687" 2.76" 2.48" 1.575" M20×2.0P 2.25
CAT40-ER25-8" 10.687" 4" 2.55
CAT40-ER32-2.76" 5.447" 6" 3.07" 1.969" M24×3.0P 1.25
CAT40-ER32-4" 6.687" 8" 1.75
CAT40-ER32-6" 8.687" Collets o 2.15
CAT40-ER32-8" 10.687" 2.76" page - 2.65
CAT40-ER40-3.15" 5.837" 4" 1.80
CAT40-ER40-4" 6.687" 6" 2.05
CAT40-ER40-6" 8.687" 8" 3.30
CAT40-ER50-4" 6.687" 2.65
3.15"
Wre hes o 4"
page 6"
4"

RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

Page

G6.3:12000rpm

Model No. L L1 D d1 d2 d3 T KGS

CAT50-ER16M-4" 8" 4" 4.10
CAT50-ER16M-6" 10" 4.28
CAT50-ER16-8" 12" 6" 1.102" 0.63" M10×1.5P 4.40
CAT50-ER20-4" 8" 4.20
CAT50-ER20-6" 10" 8" 4.45
CAT50-ER20-8" 12" 4.60
CAT50-ER25-4" 8" 4" 4.15
CAT50-ER25-6" 10" 4.50
CAT50-ER25-8" 12" 6" 1.339" 0.788" M12×1.75P 4.70
CAT50-ER32-4" 8" 4.35
CAT50-ER32-6" 10" 8" 4.60
CAT50-ER32-8" 12" 4.90
CAT50-ER40-4" 8" 4" 4.25
CAT50-ER40-6" 10" 4.80
CAT50-ER40-8" 12" 6" 1.654" 0.984" M16×2.0P 5.10
CAT50-ER50-4" 8" 4.85
CAT50-ER50-6" 10" 8" 2.75" 5.55
CAT50-ER50-8" 12" 3.875" 5.70

Wre hes o 4"
page
6" 1.969" 1.26" M16×2.0P

8"

4"

6" 2.48" 1.575" M20×2.5P

8"

4"

6" 3.07" 1.969" M24×3.0P

8"

RED ITEMS STOCK BY Collets o
BLUE ITEMS - WEEKS SEMI STD page -

Page

Milled Flat ER Holders

Model No.C-L1 L T1 T2 C D

C1-1/4"-ER25UM-60 97 M16X2.0P M12X1.75P 1-1/4" 42
C1-1/4"-ER32UM-60 1-1/4" 50
103 M16X2.0P M16X2.0P 1-1/4" 63
C1-1/4"-ER40UM-60 1-1/2" 50
C1-1/2"-ER32UM-80 120 M16X2.0P M16X2.0P 1-1/2" 63
C1-1/2"-ER40UM-75
118 M16X2.0P M16X2.0P

135 M16X2.0P M16X2.0P

Sta dard ER Nut St le

Model No.C-L1 L D T1 T2 KGS

C5/8"-ER11A-140 175.3 19 M6X1P 5/16"-18UNC 0.23
C5/8"-ER16A-60 100.3 28 M10X1.5P 5/16"-18UNC 0.12
C3/4"-ER16A-50 90.3 28 M10X1.5P 3/8"-16UNC 0.20
C3/4"-ER16A-100 140.3 28 M10X1.5P 3/8"-16UNC 0.25
C3/4"-ER16A-140 180.3 28 M10X1.5P 3/8"-16UNC 0.29
106.7 42 M10X1.5P 1/2"-13UNC 0.95
C1"-ER25-50 112.7 50 M16X2.0P 1/2"-13UNC 1.00
C1"-ER32-50 162.7 50 M16X2.0P 1/2"-13UNC 1.20
C1"-ER32-100 119.7 63 M16X2.0P 1/2"-13UNC 2.10
C1"-ER40-50 180.5 34 M12X1.75P 1/2"-13UNC 0.50
C1"-ER20A-140 111.5 50 M16X2.0P 1/2"-13UNC 1.15
C1-1/4"-ER32-60

Wre hes o RED ITEMS STOCK BY Collets o
page BLUE ITEMS - WEEKS SEMI STD page -

Page

Mi i ER Nut St le

Model No.C-L1 L D T1 T2 KGS

C3/8"-ER8M-100 117 17 12 M4X0.7P 0.15
C1/2"-ER11M-140 156.6 16.6 0.20
C1/2” -ER11M-315 315 16.6 16 M6X1.0P 0.22
C5/8"-ER11M-140 156.6 16.6 0.23
C1” -ER11M -315 315 16.6 22 M10X1.5P 0.25
C1/2"-ER16M-140 177 37 22 M10X1.5P 0.23
C3/4"-ER16M-140 165 25 35 M12X1.75P 0.25
C3/4” -ER16M –315 315 25 28 0.33
C3/4"-ER25M-100 140 40 0.35
C1"-ER20M-140 168 28 0.50

Wre hes o RED ITEMS STOCK BY Collets o
page BLUE ITEMS - WEEKS SEMI STD page -

Page

Page

Model No. dH7 D D1 D2 L L1 L2 L3 Collapsible Capacity

ER8 1.0-5.0 8 8.45 6.5 13.5 2.98 1.5 1.2 0.5
ER11 1.0-7.0 11 11.5 9.5 18 3.8 2.5 2 0.5
ER16 1.0-2.5 16 17 13.8 27.5 6.26 4 2.7 0.5
16 17 13.8 27.5 6.26 4 2.7 1
ER20 >2.5-10.0 20 21 17.4 31.5 6.36 4.8 2.8 0.5
20 21 17.4 31.5 6.36 4.8 2.8 1
ER25 1.0-2.5 25 26 22 34 6.66 5 3.1 0.5
25 26 22 34 6.66 5 3.1 1
ER32 >2.5-13.0 32 33 29.2 40 7.16 5.5 3.6 0.5
ER40 32 33 29.2 40 7.16 5.5 3.6 1
ER50 1.0-2.5 40 41 36.2 46 7.66 7 4.1 1
50 52 46 60 12.6 8.5 5.5 1
>2.5-16.0 50 52 46 60 12.6 8.5 5.5 2

2.0-2.5

>2.5-20.0

3.0-26.0
6.0-10.0

>10.0-34.0

Page

ER Collets
No Coola t

Exa ple to order
ER16- MM
ER16-1/

Type

Model No. metric inch

ER8 1,1.5,2,2.5,3,3.5,4,4.5,5 1/32,3/64,1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16

ER11 1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7 1/32,3/64,1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,7/32,
15/64,1/4,17/64

ER16 1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10 1/32,,3/64,1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,
7/32, 15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,23/64,3/8

ER20 1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5, 1/32,3/64,1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,
10,10.5,11,11.5,12,12.5,13 7/32,15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,23/64,3/8,

25/64,13/32, 27/64,7/16,29/64,15/32,31/64,1/2,33/64

ER25 1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5, 3/64,1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,7/32,
ER32 10,10.5,11,11.5,12,12.5,13,13.5,14,14.5,15,15.5,16 15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,23/64,3/8,25/64,
ER40 13/32,27/64,7/16,29/64,15/32,31/64,1/2,33/64,17/32,35/64,9/16,
1,1.5,2,2.5,3,4,5,6,7,8,9,10,11,12,13,14
15,16,17,18,19,20 37/64,19/32,39/64,5/8

3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22 1/16,3/32,1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16, 15/32
,23,24,25,26 1/2,17/32,9/16,19/32,5/8,21/32,11/16,23/32,3/4,25/32

1/16,3/32,1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32,1/2,17/32,9/16
19/32,5/8,21/32,11/16,23/32,3/4,25/32,13/16,27/32,7/8,29/32,15/16, 31/32,1″

ER50 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23, 1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32,1/2,17/32,9/16, 19/32,5/8
24,25,26,27,28, 29,30,31,32,33,34 21/32,11/16,23/32,3/4,25/32,13/16,27/32,7/8,29/32,15/16,31/32,1"
Wre hes o 1-1/32,1-1/16,1-3/32,1-1/8,1-5/32,1-3/16,1-7/32,1-1/4,1-9/32,1-5/16
page
RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

Page

Model No. Type Run-out
inch
ER11 metric 5/16 Aclass AAclass
ER16 7.5
ER20 13/32,7/16,15/32 ≤0.010 ≤0.005
ER25 11,12 17/32,9/16
ER32 14,15 21/32,11/16
ER40 17,18
21,22 13/16,27/32,7/8
27,28,29,30 1-1/32,1-1/16,1-3/32,1-1/8

ER - PCS INCH

1/32,1/16,3/32,1/8,5/32,3/16,7/32,1/4 I ch ER Collet
Sets No Coola t
ER - PCS INCH

1/8,5/32,3/16,7/32,1/4,5/16,11/32,3/8

ER - PCS INCH

1/8,5/32,3/16,7/32,1/4,9/32,5/16, ER - PCS INCH
11/32,3/8,7/16, 1/2

3/32,1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,
13/32,7/16,15/32,1/217/32,9/16,19/32,5/8

ER - PCS INCH

1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32, 7/16,15/32,1/2,
17/32,9/16,19/32,5/8,21/32,11/16, 23/32,3/4

ER - PCS INCH

1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,7/16,
15/32,1/2,9/16,19/32

5/8,11/16,23/32,3/4,13/16, 27/32,7/8,29/32,1″

Page

ER - PCS SET Metric ER Collet
COLLETS IN SET Sets No Coola t
,,,,,,
ER - PCS SET
COLLETS IN SET
,,,,,,,

ER - PCS SET
COLLETS IN SET

,,,,,,,, , , ,

ER - PCS SET
COLLETS IN SET

,,,,,,, , , , , , ,

ER - PCS SET
COLLETS IN SET

,,,,,,, , , , , , , , , , ,

ER - PCS SET
COLLETS IN SET
,,,,,, , , , , , , , , , , , , , , , ,

Page

I h & Metri
Coola t Collets

Exa ple to order
ER16C- MM
ER16C-1/

Model No. Capacity

ER11C 3-7 Type
ER16C 3-10 3,4,4.5,5,5.5,6,6.5,7
ER20C 3-13 3,4,1/8,5/32,53/16,6,1/4,5/16,7,8,3/8,9,10
ER25C 3-16 3,4,1/8,5/32,5,3/16,6,1/4,5/16,7,8,3/8,9,10,7/16,15/32,11,12,1/2,13
ER32C 3-20 3,4,1/8,5/32,5,3/16,6,1/4,5/16,7,8,3/8,9,10,7/16,15/32,11,12,1/2,13,14,9/16,15,5/8,16
3,4,1/8,5/32,5,3/16,6,1/4,5/16,7,8,3/8,9,10,7/16,15/32,11,12,1/2,13,14,9/16,5/8,15,16, 17,18,3/4,19,20

ER40C 4-26

ER50C 12-34 3,4,1/8,5,3/16,6,1/4,7,8,3/8,9,10,7/16,11,12,1/2,13,14,9/16,5/8,15,16,17,18,3/4,19,20,7/8,21,22,23,24, 25,1.0,26
12,14,16,18,20,22,24,26,28,30,32,34

RED ITEMS STOCK BY 径向跳动Run out
BLUE ITEMS - WEEKS SEMI STD

L4 d A级 A class AA级 AA class

16 3.0-6.0

25 6.0-10.0 ≤0.005
≤0.008

40 10.0-18.0

50 18.0-27.0

60 27.0-34.0 ≤0.015 ≤0.01

Page

ERG RIGID TAP COLLET INCH SIZE

RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

ER16G RIGID TAP COLLET ER25G RIGID TAP COLLET

d2 d1 SW W d2 d1 SW W

5/32 □ 5/32 □
3/16 3/16
7/32 0.168" 0.151" 0.131" 7/32 0.168" 0.151" 0.131"
1/4 0.152" 1/4 0.194" 0.180" 0.152"
0.194" 0.180" 0.165" 5/16 0.220" 0.198" 0.165"
d2 0.191" 0.255" 0.198" 0.191"
0.220" 0.198" 7/16 0.238"
5/32 0.318" 0.258"
3/16 0.255" 0.198" 1/2 0.242"
7/32 3/8
1/4 ER20G RIGID TAP COLLET 9/16 0.275"
5/16 1/8PT 0.286"
7/16 d1 SW W 5/8 0.323" 0.263" 0.322"
0.328"
1/2 □ d2 0.360"

3/8 0.168" 0.151" 0.131" 1/4 0.367" 0.307"
9/16 0.194" 0.180" 0.152" 5/16
0.220" 0.198" 0.165" 7/16 0.381" 0.321"
d2 0.255" 0.198" 0.191"
0.318" 0.258" 0.238" 1/2 0.429" 0.370"
5/32
3/16 0.323" 0.263" 0.242" 3/8 0.437" 0.378"
7/32 9/16
1/4 1/8PT 0.480" 0.422"
5/16 5/8
7/16 11/16 ER40G RIGID TAP COLLET
1/2 1/4PT
3/8 0.367 " 0.307 " 0.275 " 3/4 d1 SW W
9/16 13/16
1/8PT 1/2PT □
5/8 7/8
11/16 0.381" 0.321" 0.286" 3/8PT 0.255" 0.198" 0.191"
1/4PT 0.322" 15/16 0.318" 0.258" 0.238"
0.429" 0.370" 0.323" 0.263" 0.242"
3/4 1
ER32G RIGID TAP COLLET 0.275 "
13/16
d1 SW □W 0.367 " 0.307 " 0.286"
0.322"
0.168" 0.151" 0.131" 0.381" 0.321" 0.328"
0.360"
0.194" 0.180" 0.152" 0.429" 0.370" 0.406"
0.421"
0.220" 0.198" 0.165" 0.437" 0.378" 0.442"
0.255" 0.198" 0.191" 0.480" 0.422" 0.489"
0.318" 0.258" 0.238" 0.542" 0.486" 0.515"
0.323" 0.263" 0.242" 0.562" 0.483" 0.523"
0.367" 0.307" 0.275" 0.590" 0.512" 0.531"
0.286" 0.570"
0.381" 0.321" 0.322" 0.649" 0.576" 0.600"
0.429" 0.370" 0.328" 0.687" 0.612"
0.437" 0.378" 0.360" 0.697" 0.623"
0.480" 0.422" 0.406" 0.700" 0.634"
0.542" 0.486" 0.421" 0.760" 0.689"
0.562" 0.483" 0.800" 0.730"
0.442"
0.590" 0.512"

0.649" 0.576" 0.489"

Page
•Comprehensive features of ER nut

Page

RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

Type Model No. l L Nut

A ER11A 17 110 ER11-A
M
ER16A 25 120 ER16-A
UM
ER20A 30 130 ER20-A
S
MR ER8M 7.5 70 ER8-M
G
ISO ER11M 11 90 ER11-M

ER16M 15 110 ER16-M

ER20M 19.5 120 ER20-M

ER25M 25 130 ER25-M

ER16UM 26 180 ER16-UM

ER20UM 30 190 ER20-UM

ER25UM 37 210 ER25-UM

ER32UM 46.5 250 ER32-UM

ER40UM 58 290 ER40-UM
ER50UM 74 350 ER50-UM
S/ER25 45-52 167 ER25-UM
S/ER32 55-62 190 ER32-UM
S/ER40 68-72 215 ER40-UM
S/ER50 78-85 262 ER50-UM
ER11MR 10 100 ER11MS
ER16MR 15 135 ER16MS
ER20MR 18 160 ER20MS
ER25MR 23 180 ER25MS
GER16 30 150 ER16-G
GER20 35 160 ER20-G
GER25 40 181 ER25-G
GER32 50 200 ER32-G
ISO20-P 24 140 ISO20-P
ISO25-P 27 145 ISO25-P
ISO30-P 31 210 ISO30-P

Page

HIGH ACCURACY ER MILLING CHUCK SERIES

Type Model No. D L T RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

A ER8A 13.5 11 M10x0.75P
M ER11A 19 11.3 M14x0.75P
ER16A 28 17.5 M22x1.5P
UM/RD ER20A 34 19 M25x1.5P
KM/RD ER8M 12 11 M10x0.75P
ER11M 16 12 M13x0.75P
MS ER16M 22 18 M19x1.0P
GER ER20M 28 19 M24x1.0P
ER25M 35 20 M30x1.0P
ER16UM 32 17 M22x1.5P
ER20UM 35 19 M25x1.5P
ER25UM 42 20 M32x1.5P
ER32UM 50 22.5 M40x1.5P
ER40UM 63 25.5 M50x1.5P
ER50UM 78 35.5 M64x2.0P
ER25KM 42 20 M32x1.5P
ER32KM 50 22.5 M40x1.5P
ER40KM 63 25.5 M50x1.5P
ER50KM 78 35.5 M64x2.0P
ER11MS 16 11.3 M13x0.75P
ER16MS 22 17 M19x1.0P
ER20MS 28 19 M24x1.0P
ER25MS 35 23 M30x1.0P
GER16 30 23 M19x1.0P
GER20 35 25 M24x1.0P
GER25 40 26 M30x1.0P
GER32 50 30 M40x1.5P

Mounting instruction for ER collets and nuts

Page

TG MILLING CHUCK ARBORS

Model No. L L1 D d1 T1 T KGS
M16x2P
CAT40-TG75-2.75" 5.437" 2.75" 1.968" TW1-1/2"-12 1.20
M24x3P TW1-7/8"-12 1.40
CAT40-TG75-4" 6.687" 4" 2.5" TW2-5/8"-12 1.60
CAT40-TG75-5" 7.687" 5" TW1-7/8"-12 1.20
2.362" TW2-5/8"-12 1.40
CAT40-TG100-3" 5.687" 6" 2.55
3.228" 2.90
CAT40-TG100-4" 6.687" 5" 3.70
3.875" 2.362" 3.25
CAT40-TG100-6" 8.687" 6" 3.228" 4.40
5.30
CAT40-TG150-5" 7.687" 3" 5.70
6.10
CAT40-TG150-6" 8.687" 4" 6.50

CAT50-TG100-3" 7" 6"

CAT50-TG100-4" 8" 5"

CAT50-TG100-6" 10" 6"

CAT50-TG150-5" 9" 7"

CAT50-TG150-6" 10"

CAT50-TG150-7" 11"

RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

Model No. D d1 L l1 T KGS

TG 75 50 22.7 25 8.2 TW 1-1/2"-12 0.15
TG 100 60 29.1 30 10.5 TW 1-7/8"-12 0.30
TG 150 82 42.4 35 10.5 TW 2-5/8"-12 0.50

•CD05-0003 TG SPANNER

Model No. USE RANGE L B C I Fig KGS

TG 75 50 253 75 50 46.5 1 0.30
TG 100 55~60 260 46 55~60 52 2 0.40
TG 150 80~90 272 64 80~90 67 2 0.50

Page

TG COLLETS

RED ITEMS STOCK BY
BLUE ITEMS - WEEKS SEMI STD

Model Type d DL
No.
27 46.9
Metric (mm) inch 35 60.5

1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64 50.8 76.2

TG75 1,2,3,4,5,6,7,8,9,10,11,12,13,14 7/32,15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,
15,16,17,18,19,20
23/64,3/8,25/64,13/32,27/64,7/16,29/64,15/32,31/64,
1/2,33/64,17/32,35/64,9/16,37/64,19/32,39/64,5/8,

41/64,21/32, 43/64,11/16,45/64,23/32,47/64,

3/4,49/64,25/32,

1/8,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,17/64,

TG100 3,4,5,6,7,8,9,10,11,12, 9/32,19/64,5/16,21/64,11/32,23/64,3/8,25/64,13/32,
13,14,15,16,17,18,19,20,
27/64,7/16,29/64,15/32,31/64,1/2,33/64,17/32,35/64,
21,22,23,24,25 9/16,37/64,19/32,39/64,5/8,41/64,21/32,43/64,11/16,

45/64,23/32,47/64,3/4,49/64,25/32,51/64,13/16,53/64,

27/32,55/64,7/8,57/64,29/32,59/64,15/16,61/64, 31/32,63/64,1"

1/4,17/64,9/32,19/64,5/16,21/64,11/32,23/64,3/8,25/64,

13/32,27/64,7/16,29/64,15/32,31/64,1/2,33/64,17/32,

35/64,9/16,37/64,19/32,39/64,5/8,41/64,21/32,43/64,

6,7,8,9,10,11,12,13,14, 11/16,45/64,23/32,47/64,3/4,49/64,25/32,51/64,

TG150 15,16,17,18,19,20,21,22, 13/16,53/64,27/32,55/64,7/8,57/64,29/32,59/64,15/16,
23,24,25,26,27,28,29,30, 61/64, 31/32,63/64,1"1-1/64,1-1/32,1-3/64,1-1/16,
31,32,33,34,35, 36,37,38, 1-5/64,1-3/32,1-7/64,1-1/8,1-9/64,1-5/32,1-11/64,

39,40 1-3/16,1-13/64,1-7/32,1-15/64,1-1/4,1-17/64,

1-9/32,1-19/64,1-5/16,1-21/64,1-11/32,1-23/64,

1-3/8,1-25/64,1-13/32,1-27/64,1-7/16,1-29/64,

1-15/32,1-31/64,1-1/2,1-33/64,1-17/32,1-35/64,1-9/16

Page

Page

CAT FACE MILL ARBOR

CAT / FACE MILL ARBOR

RED ITEMS STOCK BY

Model No. d1-l1 L l2 l3 d2 d3 k1 k2 KGS

CAT40-FMA3/4"-1.5" 4.744" 0.687" 0.512" 0.925" 1.69" 0.188" 0.3125" 1.5
CAT40-FMA1"-2.06" 5.434" 0.687" 0.63" 1.240" 2.19" 0.188" 0.375" 2.4
CAT40-FMA1-1/4"-2.21" 5.584" 0.687" 0.63" 1.614" 2.75" 0.25" 0.5" 2.6
CAT40-FMA1-1/2"-2.21" 5.835" 0.938" 0.807" 1.752" 3.81" 0.349" 0.625" 2.7
CAT50-FMA3/4"-1.5" 6.187" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA3/4"-4.0" 8.587" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA3/4"-6.0" 10.587" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA3/4"-8.0" 12.587" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA3/4"-10.0" 14.587" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA3/4"-12.0" 16.587" 0.687" 0.512" 0.925" 1.69" 0.188" 0.375" 4.2
CAT50-FMA1"-2.0" 6.687" 0.687" 0.63" 1.24" 2.19" 0.188" 0.375" 4.5
CAT50-FMA1"-4.0" 8.687" 0.687" 0.63" 1.24" 2.19" 0.188" 0.375" 4.5
CAT50-FMA1"-6.0" 10.687" 0.687" 0.63" 1.24" 2.19" 0.188" 0.375" 4.5
CAT50-FMA1"-8.0" 12.687" 0.687" 0.63" 1.24" 2.19" 0.188" 0.375" 4.5
CAT50-FMA1"-10.0" 14.687" 0.687" 0.63" 1.24" 2.19" 0.188" 0.375" 4.5
CAT50-FMA1-1/4"-1.5" 6.187" 0.687" 0.63" 1.614" 2.75" 0.25" 0.5" 4.7
CAT50-FMA1-1/4"-4.0" 8.687" 0.687" 0.63" 1.614" 2.75" 0.25" 0.5" 4.7
CAT50-FMA1-1/4"-6.0" 10.687" 0.687" 0.63" 1.614" 2.75" 0.25" 0.5" 4.7
CAT50-FMA1-1/4"-8.0" 12.687" 0.687" 0.63" 1.614" 2.75" 0.25" 0.5" 4.7
CAT50-FMA1-1/2"-2.4" 7.338" 0.938" 0.807" 1.752" 3.81" 0.349" 0.625" 5
CAT50-FMA2"-2.4" 7.338" 0.938" 0.807" 2.5" 4.88" 0.384" 0.75" 5.4

Page

CAT/SLN SIDE LOCK END MILL HOLDER
G . , rp

RED ITEMS STOCK BY L l2 l3 l4 l5 d2 T KGS

E1-41 Model No. d1-l1 5.062" 0.37" - 0.787" 4.1" 0.69" 3/16"-24 1.15
5.187" 0.562" 0.984" 2.5" 0.69" 1/4"-28 1.20
CAT40-SLN1/8"-2.375" 0.63" 1 1.38" 2.5" 0.78" 1/4"-28 1.15
CAT40-SLN3/16"-2.5" 5.687" 0.63" 1.38" 4.1" 0.88" 5/16"/24 1.20
CAT40-SLN1/4"-3" 0.75" - 1.535" 2.5" 3/8"-24 1.25
CAT40-SLN5/16"-3" 6.187" 0.875" 1.732" 2.7" 1.25" 7/16"-20 1.40
CAT40-SLN3/8"-3" 6.687" 0.937" 0.875" 1.85" 3.6" 1.5" 1/2"-20 1.50
CAT40-SLN1/2"-3" 7.287" 1" 1.929" 3.9" 1.75" 5/8"-18 1.65
CAT40-SLN5/8"-3" 7.187" 1" 2.36" 4.2" 1.88" 5/8"-18 2.55
CAT40-SLN3/4"-3" 1.063" 1.41" 2.559" 4.4" 3/4"-16 2.80
CAT40-SLN7/8"-3.5" 8" 1.125" 1.41" 2.5"
CAT40-SLN1"-4" 1.41" 2.559" 4.0" 2.5" 3/4"-16 2.90
8.6" 1.125" 1.41" 3.0" 0.78" 3/4"-16 3.20
CAT40-SLN1-1/4"-4.6" 10" 1.41" 2.56" 3.4" 0.88" 1/4"-28 3.95
CAT40-SLN1-1/2"-4.5" 10" 1.125" 1.41" 1.378" 4.9" 5/16"-24 3.95
CAT50-SLN1/4"-4" 10" 0.63" 1.41" 1.378" 3.4" 1.25" 3/8"-24 4.00
CAT50-SLN5/16"-4" 10" 0.63" 1.41" 1.535" 3.5" 1.5" 7/16"-20 4.15
CAT50-SLN3/8"-4" 10" 0.781" 1.732" 4.6" 1.75" 1/2"-20 4.30
CAT50-SLN1/2"-4" 10" 0.875" 1.85" 4.6" 1.88" 5/8"-18 4.35
CAT50-SLN5/8"-4" 12" 0.937" 1.929" 4.2" 5/8"-18 5.30
CAT50-SLN3/4"-4" 12" 2.362" 4.4" 2.5" 3/4"-16 5.50
CAT50-SLN7/8"-4" 1" 2.56" 2.5" 3/4"-16 5.65
CAT50-SLN1"-4" 1.063" 2.756" 4" 3.75" 3/4"-16 5.70
CAT50-SLN1-1/4"-4" 1.125" 2.756" 3.75" 3/4"-16 5.90
CAT50-SLN1-1/2"-4.6" 1.125" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN1/2"-6" 1.125" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN5/8"-6" 1.335" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN3/4"-6" 1.335" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN1."-6" 1.335" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN1-1/4"-6" 1.335" 3.347" 3.75" 3/4"-16 5.90
CAT50-SLN2"-6" 1.335" 3.347" 3/4"-16 5.90
CAT50-SLN3/4"-8. 1.335" 3.347"
CAT50-SLN1."-8. 1.335"
1.335"

Page

Page

APU DRILL CHUCK HOLDER

Model No. d1-l1 l1 L D d1 KGS

CAT40-APU5/16-3.75" 3.75" 6.44" 2.5" 1.65" 1.85
2.5"
CAT40-APU1/2-4.75" 4.75" 7.44" 2.5" 2.13" 2.10
3.875"
CAT40-APU5/8-6" 6" 8.69" 3.875" 2.44" 2.95
3.875"
CAT50-APU5/16-4" 4" 8" 1.65" 2.10

CAT50-APU1/2-4.25" 4.25" 8.25" 2.13" 2.85

CAT50-APU5/8-4.5" 4.5" 8.5" 2.44" 3.45

BLUE ITEMS - WEEKS SEMI STD

Page

Ke ed Ja o s
Drill Chu ks

Des ripio L D Part # Pri e

DRILL CHUCKS .. $.
.. $.
J / - / JT .. $.
J / - / JT
J / - / JT .. $.
J / - / JT .. $.
J / - / JT .. $.
J / - / JT .. $.
J / - / JT
Ke less Ja o s
RED ITEMS STOCK BY Drill Chu ks

Des ripio L D Part # Pri e

DRILL CHUCKS .. UR
.. UR
J H / - / JT .. UR
J H / - / JT .. UR
J BH / - / JT .. UR
J BH / - / JT .. UR
J H / - / JT .. UR

J H / - / JT
J H / - / JT

Page

RED ITEMS STOCK BY L L1 L2 D d1 d2
Model No.
5.23" 3.385" 2.17
CAT40-C3/4"-3.385 " 6.82" 4.13"
7.21" 3.35" 2.87
CAT40-C3/4"-4.13" 8.13" 4.13" 2.56 " 0.75 " 2.17 "
8.13" 4.13" 2.76 " 2.5" 2.87
CAT40-C1-1/4"-4.53 " "
1.25 " "
"
CAT50-C3/4"-4.13" 2.56 " 0.75 "
2.76 " 1.25 "
3.875"

CAT50-C1-1/4"-4.13 "

d L Run out Balancing Grade
G6.3
A Class AA Class

20 60 0.01 0.005

22 70 0.01 0.005 8000rpm 12000rpm
25 70 0.01 0.005

32 80 0.01 0.005

42 100 0.015 0.01

Page

C STRAIGHT COLLET SERIES

•CD03-0001 C STRAIGHT COLLET •◎42CrMo
•◎46-50HRC
•◎ Material:42CrMo
•◎ Hardness:46-50HRC

RED ITEMS STOCK BY

型号 Model No. D1 D2 d L1 L2
16 20 3,4,5,6,8,10,12 47 2
C16 20 23.5 3,4,5,6,8,10,12,14,16 50 2.5
C20 22 26 3,4,5,6,8,10,12,14,16 55 3.5
C22 25 30 3,4,5,6,8,10,12,14,16,18,20 60 2.5
C25 32 36 3,4,5,6,8,10,12,14,15,16,18,20,22,24,25 65 4
C32 42 48 3,4,5,6,8,10,12,14,16,18,20,22,24,25,28,30,32 78 4
C42 40 44 6,8,10,12,14,16,18,20,25,28,30,32 78 4
C40 20 25 3,4,5,6,8,10,12,14,16 55 5
K20 25 28 3,4,5,6,8,10,12,14,16 ,18,20 60 5
K25 32 36 3,4,5,6,8,10,12,14,16 ,18,20,25 65 5
K32 42 45 3,4,5,6,8,10,12,14,16 ,18,20,25 ,28,30,32 70 5
K42
Inch size can be ordered

•CD03-0002 HPC STRAIGHT COLLET

Model No. d1 D L
20 54
HPC20 6,8,10,12 25 60
HPC25
6,8,10,12,
14,16

:Inspection of Accuracy

径向跳动 Run out(mm)

dL

普通级 A级 A class AA级 AA class

<10 30 0.015 0.01

10-20 50 0.015 0.01 0.005

>20 80 0.02 0.01

• If no special requirement.we would supply to you according to A grade;If you

.require AVERGE LEVEL、AA grade. Price would be advanced.

Page

Page

•096

• CNENTER SERIES

•CD11-0001 PRECISION HIGH SPEED LIVE CENTER (CNC MACHINE TOOLS)
Co i g late

型号 技术数据 Technolog parameter Trecision SPEED KGS
Model No. L3
D D1 D2 H a L L1 L2 r.min-1
14
MT2 17.78 20 43 6 150 80 54 8000 0.85
16
MT3 23.825 22 53 6.5 175 94 54 0.003 8000 1.3
28 63 8.5
60° 18

MT4 31.267 218 116 65 20 6000 2.1

MT5 44.399 38 83 8.5 267 132 78 5000 4.7

•CD11-0002 PRECISION HEAVY LIVE CENTER (CNC MACHINE TOOLS)

型号 Model D D1 D2 H 技术数据 精度 转速r.min-1 KGS
J k a L L1 L2 L3 0.005
MT3 23.825 28 58 6.5
8 12 172 90 50 14 4000 1.4
3000 2.2
MT4 31.267 32 68 8.5 8 12 60° 214 112 61 16 2500 5

MT5 44.399 42 88 8.5 10 16 260 132 72 17

•CD11-0003 MEDIUM-DUTY LIVE CENTER(EXTENDED)

MAX WEIHT OF

SUGGESTED WORKE IECE 精
度
MS.NO D D1 D2 L L1 L2 a RPM (KG) mm 净重(Kg)

KMK2.A18.P 17.78 18 42 135 72 27 60° 5000 200 0.008 0.75
KMK3.A25.P 23.825 24.8 56 171 91 45 60° 4000 300 0.008 1
KMK4.A28.P 31.267 28 63 201 99 50 60° 3000 600 0.008
KMK5.A41 .P 44.399 40.7 83 265 135 73 60° 2500 1500 0.008 1.7
KMK6.A52.P 63.348 52 108 365 183 97 60° 2000 4000 0.008 4

9.8

ICE TOOLS LOOKING FOR
DISTRIBUTORS
A DIVISION OF SUSSEX TOOL & SUPPLY CALL - - -
WEST MAIN STREET

LANNON WI
Pho e - - -

Fa - - -
E ail i e@susse tool. o