Supplement to ISO Focus+

ISO Update

Supplement to ISO Focus+

June 2011

People and places 2

ISO Members 3
4
International Standards in process 7
10
from 1 to 31 May 2011 14
Committee Drafts (CD) registered 14
Draft International Standards (DIS) circulated 15
Final draft International Standards (FDIS) circulated
Standards published
Standards confirmed
Standards withdrawn
Meeting calendar

People and places

ISO Members New CEO

Since the April 2011 issue of ISO Focus+, the Member body
following changes affecting ISO members have
occurred: SLOVAKIA (SUTN)
Acting General Director: Mr. Pavol Fischer
Membership change

Member body

The membership status for Morocco has been
transferred from the Service de Normalisation
Industrielle Marocaine (SNIMA) to the Institut
Marocain de Normalisation (IMANOR). Its
contact details read as follows:

MOROCCO (IMANOR)

Institut Marocain de Normalisation
Ministère de l'Industrie, du Commerce et des
Nouvelles Technologies
Angle Avenue Kamal Zebdi et Rue Dadi
Secteur 21, Hay Riad
10100 RABAT

Chef Exécutif: M. Abdellah Nejjar

Tel. +212 537 71 62 14
Fax +212 537 71 17 98
E-Mail [email protected]
Web www.snima. ma

2 ISO Update, Supplement to ISO Focus+– June 2011

International Standards in process

An International Standard is the result of an agreement between the TC 69 Applications of statistical methods
member bodies of ISO. A first important step towards an International ISO/CD 3951-1
Standard takes the form of a committee draft (CD) - this is circulated Sampling procedures for inspection by
for study within an ISO technical committee. When consensus has TC 92 variables — Part 1: Specification for single
been reached within the technical committee, the document is sent to ISO 12468- sampling plans indexed by acceptance quality
the Central Secretariat for processing as a draft International Stand- 2:2005/CD limit (AQL) for lot-by-lot inspection for a single
ard (DIS). The DIS requires approval by at least 75 % of the member Amd 1 quality characteristic and a single AQL
bodies casting a vote. A confirmation vote is subsequently carried TC 106
out on a final draft International Standard (FDIS), the approval criteria ISO/CD 17304 Fire safety
remaining the same.
TC 121 External fire exposure to roofs — Part 2: Clas-
CD registered ISO/CD sification of roofs — Amendment 1
80601-2-67
Period from 01 May to 31 May 2011 Dentistry
TC 136
These documents are currently under consideration in the technical ISO/CD 4211-2 Dentistry — Polymerisation shrinkage of filling
committee. materials
ISO/CD 4211-3
They have been registred at the Central Secretariat. Anaesthetic and respiratory equipment
TC 138
TC 20 Aircraft and space vehicles Medical electrical equipment — Part 2-67:
ISO/CD 19631 ISO/CD Particular requirements for basic safety and
Aerospace - Tube fittings for fluid sys- 17467-1 essential performance of oxygen-conserving
ISO/CD 19632 tems, 5 000 psi (35 000 kPa) - Qualification equipment
specification ISO/CD
ISO/CD 16159 17467-2 Furniture
TC 23 Aerospace - Fitting end, 24° internal cone,
external thread, flareless type Extra fine thread ISO/CD Furniture — Tests for surfaces — Part 2: As-
ISO/DTR pitch Inch series - Design standard 17467-3 sessment of resistance to wet heat
15155-2
TC 43 Space systems — Launch pad and integration TC 142 Furniture — Tests for surface finishes — Part 3:
ISO/DPAS site — Analysis of failures Assessment of resistance to dry heat
17208-1 ISO/CD
Tractors and machinery for agriculture 10121-1 Plastics pipes, fittings and valves for
TC 45 and forestry the transport of fluids
ISO/CD 3385 TC 146
TC 58 Agricultural irrigation equipment — Test facili- ISO/CD 13137 Plastics piping systems for the supply of gase-
ISO/CD 3807 ties for agricultural irrigation equipment — Part ous fuels — Unplasticized polyamide (PA-U)
ISO/CD 16148 2: Test facility operating manual TC 150 piping systems jointed by solvent cement —
ISO/CD Part 1: General
TC 61 Acoustics 14243-3
ISO/CD 306 Plastics piping systems for the supply of gase-
TC 67 Acoustics — Quantities and procedures for ISO/CD 8828 ous fuels — Unplasticized polyamide (PA-U)
description and measurement of underwater piping systems jointed by solvent cement —
ISO/CD sound from ships — Part 1: General require- TC 159 Part 2: Pipes
13503-3 ments for measurements in deep water ISO/CD TR
9241-331 Plastics piping systems for the supply of gase-
Rubber and rubber products ous fuels — Unplasticized polyamide (PA-U)
TC 172 piping systems jointed by solvent cement —
Flexible cellular polymeric materials — Deter- ISO/DTR Part 3: Fittings
mination of fatigue by constant-load pounding 16743
Cleaning equipment for air and other
Gas cylinders gases

Cylinders for acetylene — Basic requirements Test method for assessing the performance
of gas-phase air cleaning media and devices
Gas cylinders — Refillable seamless steel gas for general ventilation — Part 1: Gas-phase air
cylinders — Acoustic emission (AT) examina- cleaning media
tion and follow-up ultrasonic examination (UT)
for periodic inspection and testing Air quality

Plastics Workplace atmospheres — Personal sampling
pumps — Requirements and test methods
Plastics — Thermoplastic materials — Determi-
nation of Vicat softening temperature (VST) Implants for surgery

Materials, equipment and offshore Implants for surgery — Wear of total knee-joint
structures for petroleum, petrochemi- prostheses — Part 3: Loading and displace-
cal and natural gas industries ment parameters for wear-testing machines
with displacement control and corresponding
Petroleum and natural gas industries — Com- environmental conditions for test
pletion fluids and materials — Part 3: Testing of
heavy brines Implants for surgery — Guidance on care and
handling of orthopaedic implants
ISO Update, Supplement to ISO Focus -- June 2011
Ergonomics

Ergonomics of human-system interaction —
Part 331: Optical characteristics of autostere-
scopic displays

Optics and photonics

Optics and photonics — Wavefront sensors
for characterising optical systems and optical
components

3

TC 193 Natural gas DIS circulated
ISO/CD 14532
TC 229 Natural gas — Vocabulary Period from 01 May to 31 May 2011
ISO/DTR
13014 Nanotechnologies These documents have obtained substantial support within the ap-
propriate ISO technical committee.
TC 238 Nanotechnologies - Guidance on physico-
ISO/CD 16559 chemical characterization of engineered na- They have been submitted to the ISO member bodies for voting by
noscale materials for toxicologic assessment the date shown.
CASCO
ISO/IEC CD TS Solid biofuels * Available in English only
17022
Solid biofuels — Terminology, definitions and Vote
JTC 1 descriptions terminates
ISO/IEC PDTR
38502 Committee on conformity assessment TC 8 Ships and marine
ISO/IEC technology
9594-1:2008/ Conformity assessment — Requirements and
PDAM 3 recommendations for the content of a third- ISO/DIS Ships and marine technology — 2011-10-27
party audit report on management systems 11711-1 Piping and machinery — Ballast
ISO/IEC water management systems
9594-2:2008/ Information technology — Part 1: Discharge sampling
PDAM 3 apparatus
ISO/IEC Governance ot IT - Framework and Model
9594-3:2008/ TC 17 Steel
PDAM 3 Information technology — Open Systems
Interconnection — The Directory: Overview of ISO/DIS 630-3 * Structural steels — Part 3: Tech-
ISO/IEC concepts, models and services — Part 1: — nical delivery conditions for fine 2011-10-04
9594-4:2008/ Amendment 3: IdM support grain structural steels
PDAM 3 (Revision of ISO 630:1995, ISO
Information technology — Open Systems In- 630:1995/Amd 1:2003)
ISO/IEC terconnection — The Directory: Models — Part
9594-5:2008/ 2: — Amendment 3: IdM support ISO/DIS 630-4 * Structural steels — Part 4: Tech-
PDAM 3 nical delivery conditions for high 2011-10-04
Information technology — Open Systems yield strength quenched and
ISO/IEC Interconnection — The Directory: Abstract tempered structural steel plates
9594-6:2008/ service definition — Part 3: — Amendment 3: (Revision of ISO 630:1995, ISO
PDAM 3 IdM support 630:1995/Amd 1:2003)
ISO/IEC
9594-7:2008/ Information technology — Open Systems In- ISO/DIS 7452 * Hot-rolled steel plates — Toler-
PDAM 3 terconnection — The Directory: Procedures for ances on dimensions and shape 2011-10-13
distributed operation — Part 4: — Amendment
ISO/IEC 3: IdM support TC 21 (Revision of ISO 7452:2002) 2011-10-10
9594-8:2008/ 2011-10-10
PDAM 3 Information technology — Open Systems ISO/DIS Equipment for fire protec- 2011-10-10
Interconnection — The Directory: Protocol 7076-1 tion and fire fighting
ISO/IEC specifications — Part 5: — Amendment 3: IdM
9594-9:2008/ support ISO/DIS * Fire protection - Foam fire
PDAM 3 7076-2 extinguishing systems — Part 1:
ISO/IEC Information technology — Open Systems Inter- Foam proportioning equipment
9594-10:2008/ connection — The Directory: Selected attribute ISO/DIS 7202
PDAM 3 types — Part 6: — Amendment 3: IdM support * Fire protection - Foam fire extin-
guishing systems — Part 2: Low
ISO/IEC Information technology — Open Systems expansion foam equipment
18025:2005/ Interconnection — The Directory: Selected
PDAM 1 object classes — Part 7: — Amendment 3: * Fire protection — Fire extin-
ISO/IEC CD IdM support guishing media — Powder
27013
Information technology — Open Systems TC 22 (Revision of ISO 7202:1987) 2011-10-17
ISO/IEC CD Interconnection — The Directory: Public-key ISO/DIS 2011-10-11
21000-20 and attribute certificate frameworks — Part 8: 13209-3 Road vehicles 2011-10-04
— Amendment 3: IdM support
ISO/IEC CD ISO/DIS * Road vehicles — Open Test se-
9995-9 Information technology — Open Systems 22241-5 quence eXchange format (OTX)
Interconnection — The Directory: Replication — Part 3: Standard extensions
— Part 9: — Amendment 3: IdM support TC 27 and requirements
ISO/DIS 501
Information technology — Open Systems Inter- Diesel engines — NOx Reduc-
connection — The Directory: Use of systems tion agent AUS 32 — Part 5:
management for administration of the Directory Refilling interface for passenger
— Part 10: — Amendment 3: IdM support cars

Information technology — Environmental Data Solid mineral fuels
Coding Specification (EDCS) — Amendment 1
* Hard coal — Determination of
Information technology — Security techniques the crucible swelling number
— Guidelines on the integrated implementation
of ISO/IEC 27001 and ISO/IEC 20000-1 TC 28 (Revision of ISO 501:2003)
ISO/DIS 10976 *
Information technology — Multimedia frame- Petroleum products and
work (MPEG-21) — Part 20: Contract Expres- lubricants
sion Language
Refrigerated light hydrocarbon
Information technology — Keyboard layouts for fluids - Measurement of cargoes
text and office systems — Part 9: Multilingual- on board marine LNG carriers
usage, multiscript keyboard group layouts

2011-10-17

4 ISO Update, Supplement to ISO Focus -- June 2011

TC 29 Small tools ISO/DIS * Plastics — Thermoplastic
ISO/DIS 7792-2 polyester (TP) moulding and
603-17 * Bonded abrasive products — extrusion materials — Part 2: 2011-10-06
TC 30 Dimensions — Part 17: Mounted 2011-10-21 Preparation of test specimens
ISO/DIS wheels and determination of properties
4064-1 (Revision of ISO 7792-2:1997)
Measurement of fluid flow
ISO/DIS in closed conduits ISO/DIS 12000 Plastics/rubber — Polymer
4064-2 dispersions and rubber latices
* Water meters intended for (natural and synthetic) — Defini- 2011-10-26
TC 31 the metering of cold potable tions and review of test methods
ISO/DIS water and hot water — Part 2011-10-13 (Revision of ISO 12000:2000)
4000-1 1: Metrological and technical
requirements TC 67 Materials, equipment and
TC 37 (Revision of ISO 4064-1:2005) offshore structures for pe-
troleum, petrochemical and
ISO/DIS 1087 * Water meters intended for the 2011-10-13 natural gas industries
metering of cold potable water
TC 45 and hot water — Part 2: Test ISO/DIS 13847 Petroleum and natural gas indus-
ISO/DIS 3994 methods tries — Pipeline transportation
(Revision of ISO 4064-3:2005) systems — Welding of pipelines 2011-10-31
ISO/DIS 8029 (Revision of ISO 13847:2000,
Tyres, rims and valves ISO 13847:2000/Cor 1:2001)
ISO/DIS 127
* Passenger car tyres and rims —
ISO
4656:2007/ Part 1: Tyres (metric series) 2011-10-10 TC 69 Applications of statistical
DAmd 1 methods
(Revision of ISO 4000-1:2010)
TC 58 ISO/DIS Statistical methods in process 2011-07-19
ISO Terminology and other 22514-6.2 management — Capability and
22435:2007/ language and content performance — Part 6: Process
DAmd 1 resources capability statistics for charac-
ISO teristics following a multivariate
11120:1999/ * Terminology work — Vocabulary normal distribution
DAmd 1
2011-11-01
TC 61
ISO/DIS (Revision of ISO 1087-1:2000) TC 70 Internal combustion
7792-1 engines
Rubber and rubber
products ISO/DIS * Methods of test for full-flow
4548-6 lubricating oil filters for internal
* Plastics hoses — Helical-ther- combustion engines — Part 6: 2011-10-04
moplastic-reinforced thermo- Static burst pressure test
plastics hoses for suction and 2011-10-20 (Revision of ISO 4548-6:1985,
discharge of aqueous materials ISO 4548-6:1985/Cor 1:1990)
— Specification
(Revision of ISO 3994:2007) ISO/DIS * Methods of test for full-flow
4548-7 lubricating oil filters for internal
* Plastics hose — General-pur- combustion engines — Part 7: 2011-10-04
pose collapsible water hose, tex- 2011-10-20 Vibration fatigue test
tile-reinforced — Specification (Revision of ISO 4548-7:1990)
(Revision of ISO 8029:2007)

* Rubber, natural latex concentrate TC 79 Light metals and their
— Determination of KOH number 2011-10-21 alloys

(Revision of ISO 127:1995, ISO ISO/DIS 13092 * Titanium and titanium alloys — 2011-10-06
127:1995/Amd 1:2006) Titanium sponge

* Rubber compounding ingredi- TC 85 Nuclear energy, nuclear
ISO/DIS technologies, and radio-
ents — Carbon black — De- 2011-10-18 15366-1 logical protection

termination of oil absorption ISO/DIS
15366-2
number (OAN) and oil absorption

number of compressed sample * Nuclear fuel technology —

(COAN) — Amendment 1 Chemical separation and 2011-10-25

Gas cylinders purification of uranium and

* Gas cylinders — Cylinder valves plutonium in nitric acid solutions
with integrated pressure regula-
tors — Specification and type 2011-10-06 for isotopic and isotopic dilution
testing — Amendment 1
analysis by solvent extraction

chromatography — Part 1: Sam-

ples containing plutonium in the

* Gas cylinders — Refillable seam- microgram range and uranium in
less steel tubes for compressed 2011-10-20
gas transport, of water capacity the milligram range
between 150 l and 3000 l —
Design construction and testing (Revision of ISO 15366:1999)
— Amendment 1: Requirements
for design of tubes for embrit- * Nuclear fuel technology —
tling gases
Chemical separation and 2011-10-25

purification of uranium and

plutonium in nitric acid solutions

Plastics for isotopic and isotopic dilution

analysis by solvent extraction

* Plastics — Thermoplastic chromatography — Part 2: Sam-
polyester (TP) moulding and
extrusion materials — Part 1: 2011-10-06 ples containing plutonium and
Designation system and basis
for specifications uranium in the nanogram range
(Revision of ISO 7792-1:1997)
and below

(Revision of ISO 15366:1999)

ISO Update, Supplement to ISO Focus -- June 2011 5

TC 92 Fire safety ISO/DIS * Plastics piping systems for
ISO/DIS 16486-3 the supply of gaseous fuels -
834-12 Fire resistance tests — Elements Unplasticized polyamide (PA-U) 2011-10-11
of building construction — Part 2011-11-01 piping systems with fusion 2011-10-11
TC 94 12: Specific requirements for jointing and mechanical jointing 2011-10-11
separating elements evaluated — Part 3: Fittings
ISO/DIS on less than full scale furnaces (Revision of ISO 22621-3:2007) 2011-10-06
12127-1 2011-10-06
Personal safety -- Pro- ISO/DIS * Plastics piping systems for
TC 106 tective clothing and 16486-5 the supply of gaseous fuels - 2011-10-07
ISO/DIS equipment Unplasticized polyamide (PA-U) 2011-10-07
3630-2 piping systems with fusion 2011-10-18
* Clothing for protection against ISO/DIS * jointing and mechanical jointing 2011-10-28
heat and flame — Determination 2011-10-06 16486-6 — Part 5: Fitness for purpose of 2011-10-10
of contact heat transmission the system 2011-09-07
through protective clothing or (Revision of ISO 22621-5:2010)
constituent materials — Part 1:
Contact heat produced by heat- Plastics piping systems for
ing cylinder the supply of gaseous fuels -
(Revision of ISO 12127-1:2007) Unplasticized polyamide (PA-U)
piping systems with fusion
Dentistry jointing and mechanical jointing
— Part 6: Code of practice for
* Dentistry — Endodontic instru- 2011-10-27 design, handling and installation
ments — Part 2: Enlargers (Revision of ISO 22621-6:2010)

(Revision of ISO 3630-2:2000) TC 172 Optics and photonics
ISO/DIS
TC 107 Metallic and other inorgan- 9022-1 * Optics and photonics — Envi-
ic coatings * ronmental test methods — Part
ISO/DIS 1: Definitions, extent of testing
ISO/DIS 14188 * Metallic and other inorganic 9022-22 (Revision of ISO 9022-1:1994)
coatings — Test methods for
measuring thermal cycle resist- 2011-10-19 Optics and photonics — Envi-
ance and thermal shock resist- ronmental test methods
ance for thermal barrier coatings — Part 22: Combined cold, dry
heat or temperature change with
TC 126 Tobacco and tobacco bump or random vibration
products (Revision of ISO 9022-19:1994,
ISO 9022-10:1998, ISO 9022-
ISO * Tobacco — Determination of the 13:1998, ISO 9022-15:1998, ISO
15152:2003/ content of total alkaloids as nico- 2011-10-18 9022-16:1998)
DAmd 1 tine — Continuous-flow analysis
method — Amendment 1: . Quality management and
TC 176 quality assurance
ISO * Tobacco — Determination of the ISO/DIS 10018 *
15153:2003/ content of reducing substances 2011-10-20 Quality management — Guide-
DAmd 1 — Continuous-flow analysis lines on people involvement and
method — Amendment 1: . competences

ISO * Tobacco — Determination of the Safety of toys
15154:2003/
DAmd 1 content of reducing carbohy- 2011-10-20 TC 181 Safety of toys — Part 1: Safety
aspects related to mechani-
drates — Continuous-flow analy- ISO 8124- * cal and physical properties —
1:2009/DAmd Amendment 2: Magnets
sis method — Amendment 1: . 2
Safety of toys — Part 4: Swings,
ISO * Tobacco — Determination of ISO 8124- slides and similar activity toys
15517:2003/ nitrate content — Continuous- 2011-10-20 4:2010/DAmd for indoor and outdoor family
DAmd 1 flow analysis method — Amend- 1 domestic use — Amendment 1:
ment 1: . Inflatable activity toys

TC 127 Earth-moving machinery Building construction ma-
chinery and equipment
ISO/DIS 6165 * Earth-moving machinery —
Basic types — Identification and 2011-10-27 Road construction and main-
terms and definitions TC 195 tenance equipment — Soil
(Revision of ISO 6165:2006) ISO/DIS 15688 * stabilizers — Terminology and
commercial specifications
TC 138 Plastics pipes, fittings and (Revision of ISO 15688:2003)
valves for the transport of
fluids Fine ceramics

ISO/DIS * Plastics piping systems for 2011-10-11 TC 206 Fine ceramics (advanced ceram-
16486-1 the supply of gaseous fuels - ISO/DIS 13125 * ics, advanced technical ceram-
Unplasticized polyamide (PA-U) ics) — Test method for antifungal
piping systems with fusion activity of semiconducting
jointing and mechanical jointing photocatalytic materials
— Part 1: General
(Revision of ISO 22621-1:2007) Technical Management
Board
ISO/DIS * Plastics piping systems for 2011-10-11 TMB
16486-2 the supply of gaseous fuels - ISO/DGuide 83 * High level structure and identical
Unplasticized polyamide (PA-U) text for management system
piping systems with fusion standards and common core
jointing and mechanical jointing management system terms and
— Part 2: Pipes definitions
(Revision of ISO 22621-2:2007)

6 ISO Update, Supplement to ISO Focus -- June 2011

IULTCS International Union of ISO/FDIS * Ships and marine technology — 2011-07-28
ISO/DIS 17131 * Leather Technologists and 13122 Launching appliances for davit- 2011-07-27
Chemists Societies launched liferafts
2011-10-13 ISO/FDIS
Leather - Identification of leather 14409 * Ships and marine technology —
with microscopy Ship launching air bags

ISO/DIS 20433 * Leather — Tests for colour TC 20 Aircraft and space vehicles
fastness — Colour fastness to ISO/FDIS
crocking 2011-10-20 22072 * Aerospace — Electrohydrostatic
(Revision of ISO 20433:2005) 2011-10-27 actuator (EHA) — Characteristics 2011-07-14
ISO/FDIS to be defined in procurement
CASCO Committee on conformity 2011-10-05 10794 specifications
assessment 2011-10-07 (Revision of ISO 22072:2005)
ISO/FDIS
ISO/IEC DIS * Conformity assessment — Re- 10795 * Space systems — Programme 2011-07-11
17065 quirements for bodies certify- management — Material, me-
ing products, processes and chanical parts and processes
services
(Revision of ISO/IEC Guide * Space systems — Programme 2011-07-14
65:1996) management — Vocabulary

JTC 1 Information technology TC 21 Equipment for fire protec-
tion and fire fighting
ISO/IEC DIS * Telecommunications and infor- ISO/FDIS *
17417 mation exchange between sys- 7240-7 Fire detection and alarm systems
tems — Short Distance Visible — Part 7: Point-type smoke
Light Communication (SDVLC) detectors using scattered light, 2011-07-03
transmitted light or ionization 2011-07-04
ISO/IEC DIS * Programming languages — C (Revision of ISO 7240-7:2003)
9899 2011-07-21
Road vehicles 2011-07-13
(Revision of ISO/IEC 9899:1999, TC 22 * 2011-07-27
ISO/IEC 9899:1999/Cor 1:2001, Electrically propelled road
ISO/IEC 9899:1999/Cor 2:2004, ISO/FDIS vehicles — Safety specification 2011-07-12
ISO/IEC 9899:1999/Cor 3:2007) 6469-3 — Part 3: Protection of persons 2011-07-19
against electric shock
FDIS circulated TC 23 * (Revision of ISO 6469-3:2001,
ISO 6469-3:2001/Cor 1:2003)
ISO/FDIS
12809 Tractors and machinery for
agriculture and forestry
Period from 01 May to 31 May 2011 ISO 8224- *
Crop protection equipment —
These Final draft International Standards have been submitted to the 1:2003/FDAmd Reciprocating positive displace-
ISO member bodies for formal approval by the date shown ment pumps and centrifugal
1 pumps — Test methods
* Available in English only
ISO/FDIS * Traveller irrigation machines —
24631-6 Part 1: Operational characteris-
tics and laboratory and field test
IIW Vote TC 28 methods — Amendment 1
terminates ISO/FDIS 3771 *
ISO/FDIS Radiofrequency identification
14271 International Institute of TC 29 of animals — Part 6: Represen-
Welding ISO/FDIS 2238 * tation of animal identification
TC 6 information (visual display/data
ISO/FDIS * Resistance welding — Vickers transfer)
15320 hardness testing (low-force and 2011-07-27
microhardness) of resistance Petroleum products and
TC 8 spot, projection, and seam welds lubricants
(Revision of ISO 14271:2000)
ISO/FDIS Petroleum products — Deter-
28002 Paper, board and pulps mination of base number —
Perchloric acid potentiometric
* Pulp, paper and board — Deter- titration method
mination of pentachlorophenol in 2011-07-27 (Revision of ISO 3771:1994)
an aqueous extract
(Revision of ISO 15320:2003) Small tools

Ships and marine Machine bridge reamers
technology
TC 35 (Revision of ISO 2238:1972) 2011-07-20
* Security management systems
for the supply chain — Develop- 2011-07-11 ISO/FDIS Paints and varnishes
ment of resilience in the supply 4628-6
chain — Requirements with * Paints and varnishes — Evalua-
guidance for use tion of degradation of coatings
(Revision of ISO/PAS — Designation of quantity and
28002:2010) size of defects, and of intensity
of uniform changes in appear-
ance — Part 6: Assessment
of degree of chalking by tape
method
(Revision of ISO 4628-6:2007)

ISO Update, Supplement to ISO Focus -- June 2011 7

TC 44 Welding and allied ISO/FDIS * Petroleum and natural gas indus-
processes 13628-15 tries — Design and operation of 2011-07-13
subsea production systems —
ISO/FDIS * Non-destructive testing of welds TC 69 Part 15: Subsea structures and
10863 — Ultrasonic testing — Use of 2011-07-27 ISO/FDIS manifolds
time-of-flight diffraction tech- 13053-1
nique (TOFD) ISO/FDIS Applications of statistical
13053-2 methods
TC 45 Rubber and rubber TC 76
products
ISO/FDIS * Quantitative methods in process
8362-4
ISO * Rubber and plastics hoses and improvement — Six Sigma — 2011-07-17
4671:2007/ hose assemblies — Methods of 2011-08-06 ISO/FDIS
FDAmd 1 measurement of the dimensions 8536-1 Part 1: DMAIC methodology
of hoses and the lengths of hose
assemblies — Amendment 1: TC 77 * Quantitative methods in process
Clarification of position at which ISO/FDIS
outside diameter is measured 10904 improvement — Six Sigma — 2011-07-17

TC 79 Part 2: Tools and techniques
ISO/FDIS
ISO * Rubber or plastics hoses — De- 11707 Transfusion, infusion
6801:1983/ termination of volumetric expan- 2011-08-06 and injection, and blood
FDAmd 1 sion — Amendment 1: Deletion processing equipment for
of alcohol as pressurizing fluid medical and pharmaceuti-
cal use

ISO/FDIS 1853 * Conducting and dissipative rub- * Injection containers and acces- 2011-08-13
bers, vulcanized or thermoplastic sories — Part 4: Injection vials
— Measurement of resistivity 2011-07-19 made of moulded glass
(Revision of ISO 1853:1998) (Revision of ISO 8362-4:2003)

ISO/FDIS 5600 * Rubber — Determination of * Infusion equipment for medi- 2011-08-13
adhesion to rigid materials using cal use — Part 1: Infusion glass
conical shaped parts 2011-07-12 bottles
(Revision of ISO 5600:2007) (Revision of ISO 8536-1:2006)

ISO/FDIS 5603 * Rubber, vulcanized — Determi- 2011-07-12 Products in fibre reinforced
nation of adhesion to wire cord cement

(Revision of ISO 5603:2007) * Fibre-cement corrugated sheets 2011-07-04
and fittings for roofing and
ISO/FDIS * Rubber, vulcanized — Determi- 2011-07-04 cladding
12493 nation of stress in tension upon (Revision of ISO 9384:1991, ISO
heating 9933:1995)

ISO/FDIS 2303 * Isoprene rubber (IR) — Non-oil- Light metals and their
extended, solution-polymerized alloys
types — Evaluation procedures 2011-07-26
(Revision of ISO 2303:2003)
* Magnesium and its alloys — De-
termination of lead and cadmium 2011-07-07

TC 46 Information and
documentation
ISO/FDIS * Wrought aluminium and alu-
6361-1 minium alloys — Sheets, strips
ISO/FDIS * Information and documenta- and plates — Part 1: Technical 2011-07-31
15511 tion — International standard 2011-07-20 conditions for inspection and 2011-07-31
identifier for libraries and related delivery 2011-07-31
organizations (ISIL) (Revision of ISO 6361-1:1986) 2011-07-31
(Revision of ISO 15511:2009) 2011-07-31
Wrought aluminium and alu- 2011-07-14
TC 61 Plastics ISO/FDIS * minium alloys — Sheets, strips
6361-2 and plates — Part 2: Mechanical
properties
ISO/FDIS * Plastics — Methodology for 2011-07-28 (Revision of ISO 6361-2:1990)
10640 assessing polymer photoage-
ing by FTIR and UV/visible Wrought aluminium and alumin-
spectroscopy ISO/FDIS * ium alloys — Sheets, strips and
6361-3 plates — Part 3: Strips: Toler-
ISO/FDIS * Measurement of antibacterial ances on shape and dimensions
22196 activity on plastics and other 2011-07-04 (Revision of ISO 6361-3:1985)
non-porous surfaces
(Revision of ISO 22196:2007) Wrought aluminium and alu-
minium alloys — Sheets, strips
ISO/FDIS 4901 * Reinforced plastics based on ISO/FDIS * and plates — Part 4: Sheets and
unsaturated-polyester resins — 6361-4 plates: Tolerances on shape and
Determination of the residual sty- 2011-07-19 dimensions
rene monomer content, as well (Revision of ISO 6361-4:1988)
as the content of other volatile ISO/FDIS *
aromatic hydrocarbons, by gas 6361-5 Wrought aluminium and alu-
chromatography minium alloys — Sheets, strips
(Revision of ISO 4901:1985) and plates — Part 5: Chemical
composition
TC 67 Materials, equipment and
offshore structures for pe- Sports and recreational
troleum, petrochemical and TC 83 equipment
natural gas industries ISO/FDIS 7795 *
Cross-country skis — Ski-bind-
ISO/FDIS * Petroleum and natural gas indus- ing screws — Test methods
12490 tries — Mechanical integrity and 2011-07-20
sizing of actuators and mounting
kits for pipeline valves (Revision of ISO 7795:1994)

8 ISO Update, Supplement to ISO Focus -- June 2011

TC 92 Fire safety ISO/FDIS * Glass in building — Laminated
ISO/FDIS 12543-4
12136 * Reaction to fire tests — Meas- glass and laminated safety 2011-07-06
urement of material proper- ISO/FDIS
TC 106 ties using a fire propagation 2011-07-26 12543-5 glass — Part 4: Test methods for
ISO apparatus
24234:2004/ ISO/FDIS durability
FDAmd 1 12543-6
(Revision of ISO 12543-4:1998)
ISO/FDIS TC 172
1797-1 Dentistry ISO/FDIS * Glass in building — Laminated
9344.2 glass and laminated safety glass 2011-07-06
ISO/FDIS * Dentistry — Mercury and alloys 2011-07-13 — Part 5: Dimensions and edge
7494-1 for dental amalgam — Amend- finishing
ment 1: Requirements for mark- (Revision of ISO 12543-5:1998)
TC 112 ing and manufacturer's instruc-
ISO/FDIS tions concerning mercury * Glass in building — Laminated
27893 glass and laminated safety glass 2011-07-06
* Dentistry — Shanks for rotary 2011-07-20 — Part 6: Appearance
TC 121 instruments — Part 1: Shanks (Revision of ISO 12543-6:1998)
ISO/FDIS made of metals
80601-2-13 (Revision of ISO 1797-1:1992, Optics and photonics
ISO 1797-1:1992/Amd 1:1997)
TC 142 * Microscopes — Graticules for
ISO/FDIS * Dentistry — Dental units — Part eyepieces 2011-07-26
29464 1: General requirements and test 2011-07-20
methods (Revision of ISO 9344:1996)
TC 150 (Revision of ISO 7494-1:2004)
ISO/FDIS TC 173 Assistive products for per-
5834-2 Vacuum technology ISO/FDIS sons with disability
24415-2
TC 159 * Vacuum technology — Vacuum * Tips for assistive products for 2011-07-11
ISO/FDIS gauges — Evaluation of the un- 2011-07-20 TC 204 walking — Requirements and
26800 certainties of results of calibra- ISO/FDIS test methods — Part 2: Durabil-
tions by direct comparison with a 14906 ity of tips for crutches
reference gauge
(Revision of ISO/TS 27893:2009) TC 219 Intelligent transport
ISO/FDIS systems
10581
Anaesthetic and respiratory ISO/FDIS * Electronic fee collection — 2011-07-20
equipment 24343-2 Application interface defini-
tion for dedicated short-range
* Medical electrical equipment 2011-07-09 ISO/FDIS communication
— Part 2-13: Particular require- 24343-3 (Revision of ISO 14906:2004)
ments for basic safety and
essential performance of an TC 234 Floor coverings
anaesthetic workstation ISO/FDIS
(Revision of IEC 60601-2- 12877 * Resilient floor coverings — Ho- 2011-07-21
13:2003, ISO 8835-4:2004, ISO mogeneous poly(vinyl chloride)
8835-5:2004, ISO 8835-3:2007, JTC 1 floor covering — Specification
ISO 8835-2:2007) ISO/IEC FDIS
14651 * Resilient and laminate floor

Cleaning equipment for air ISO/IEC/IEEE coverings — Determination 2011-07-14
and other gases FDIS 42010
of indentation and residual

indentation — Part 2: Short-term

* Cleaning equipment for air and residual indentation of resilient
other gases — Terminology
2011-07-26 floor covering

(Revision of ISO 3649:1980) * Resilient and laminate floor

Implants for surgery coverings — Determination 2011-07-14

* Implants for surgery — Ultra- of indentation and residual
high-molecular-weight polyethyl- 2011-07-03
ene — Part 2: Moulded forms indentation — Part 3: Indenta-
(Revision of ISO 5834-2:2006,
ISO 5834-2:2006/CD Amd 1) tion of resilient semi-flexible/vinyl

Ergonomics composition tiles

* Ergonomics — General ap- Fisheries and aquaculture
proach, principles and concepts 2011-07-06
* Traceability of finfish products —
Specification on the information 2011-07-20
to be recorded in farmed finfish
distribution chains

Information technology

TC 160 Glass in building * Information technology — In- 2011-07-20
ISO/FDIS ternational string ordering and
12543-1 * Glass in building — Laminated 2011-07-06 comparison — Method for
glass and laminated safety comparing character strings
ISO/FDIS glass — Part 1: Definitions and and description of the common
12543-2 description of component parts template tailorable ordering
(Revision of ISO 12543-1:1998) (Revision of ISO/IEC
ISO/FDIS 14651:2007, ISO/IEC
12543-3 * Glass in building — Laminated 14651:2007/Amd 1:2009, ISO/
glass and laminated safety glass 2011-07-06 IEC 14651:2007/DAM 2)
— Part 2: Laminated safety glass
(Revision of ISO 12543-2:2004) * Systems and software engineer-
ing — Architecture description 2011-07-11
* Glass in building — Laminated
glass and laminated safety glass 2011-07-06 (Revision of ISO/IEC
— Part 3: Laminated glass 42010:2007)
(Revision of ISO 12543-3:1998)

ISO Update, Supplement to ISO Focus -- June 2011 9

ISO/IEC FDIS * Identification cards — Test meth- ISO/IEC FDIS * Information technology — Radio
10373-9 ods — Part 9: Optical memory 2011-07-05 24753 frequency identification (RFID) 2011-07-11
cards — Holographic recording for item management — Ap-
method ISO/IEC FDIS plication protocol: encoding and
19794-5 processing rules for sensors and
ISO/IEC FDIS * Information technology — Per- 2011-07-07 batteries
18013-4 sonal identification — ISO-com- ISO/IEC FDIS
pliant driving licence — Part 4: 19794-6 * Information technology — Bio-
Test methods metric data interchange formats 2011-07-24
ISO/IEC FDIS — Part 5: Face image data
ISO/IEC FDIS * Information technology — Se- 19794-9 (Revision of ISO/IEC 19794-
27035 curity techniques — Information 2011-07-07 5:2005, ISO/IEC 19794-5:2005/
security incident management ISO/IEC FDIS Amd 1:2007)
29109-6
(Revision of ISO/IEC TR * Information technology — Bio- 2011-07-28
18044:2004) ISO/IEC FDIS metric data interchange formats
29109-7 — Part 6: Iris image data
ISO/IEC FDIS * Information technology — Office (Revision of ISO/IEC
29102 ISO/IEC FDIS 19794-6:2005)
equipment — Method for the 2011-07-10 29164

determination of ink cartridge

photo yield for colour printing * Information technology — Bio-
metric data interchange formats
with inkjet printers and multi- — Part 9: Vascular image data 2011-07-26
(Revision of ISO/IEC
function devices that contain 19794-9:2007)

inkjet printer components

ISO/IEC * Information technology — Ge- * Information technology — Con-
formance testing methodology
13818-1:2007/ neric coding of moving pic- 2011-07-07 for biometric data interchange 2011-07-05
formats defined in ISO/IEC
FDAmd 5 tures and associated audio 19794 — Part 6: Iris image data

information: Systems — Part

1: — Amendment 5: Transport

of JPEG 2000 Part 1 (ITU-T Rec

T.800 | ISO/IEC 15444-1) video * Information technology — Con-
formance testing methodology
over ITU-T Rec H.222.0 | ISO/ for biometric data interchange 2011-07-19
formats defined in ISO/IEC
IEC 13818-1 19794 — Part 7: Signature/sign
time series data
ISO/IEC * Information technology — Ge-

13818-1:2007/ neric coding of moving pictures 2011-07-07

FDAmd 6 and associated audio informa-

tion: Systems — Part 1: — * Information technology — Bi-
ometrics — Embedded BioAPI
Amendment 6: Extension to AVC 2011-07-11

video descriptor and signalling of

operation points for MVC

ISO/IEC * Information technology — Mul-
15938- timedia content description inter- 2011-07-05
12:2008/ face — Part 12: Query format
FDAmd 2 — Amendment 2: Semantic
enhancement

ISO/IEC * Information technology — Multi- Standards published
media framework (MPEG-21) —
21000-2:2005/ Part 2: Digital Item Declaration 2011-07-05
— Amendment 1: Presentation
FDAmd 1 of digital item

ISO/IEC * Information technology — Mul- New International Standards published between 01 May and 31 May
2011
21000-4:2006/ timedia framework (MPEG-21) 2011-07-05
* Available in English only
FDAmd 2 — Part 4: Intellectual Property
** French version of standard previously published in English only
Management and Protection

Components — Amendment

2: Protection of presentation

element Price
group
ISO/IEC * Information technology — Mul-
23000- timedia application format 2011-07-05
12:2010/ (MPEG-A) — Part 12: Interac-
FDAmd 1 tive music application format TC 2 Fasteners
— Amendment 1: Conformance
and reference software ISO Hexagon bolts with flange — Small E
15071:2011 series — Product grade A

ISO/IEC * Information technology — MPEG TC 6 Paper, board and pulps
ISO 3034:2011
23002-4:2010/ video technologies — Part 4: 2011-07-05 Corrugated fibreboard — Determina-
tion of single sheet thickness
FDAmd 1 Video tool library — Amendment E

1: Video tool library conformance

and reference software

ISO/IEC FDIS * Information technology — Radio TC 12 Quantities and units
18046-1 frequency identification device 2011-07-27
performance test methods — ISO 80000- Quantities and units — Part 9: Physical
Part 1: Test methods for system 9:2009/Amd chemistry and molecular physics — XZ
performance 1:2011 Amendment 1 G

(Revision of ISO/IEC TC 20 Aircraft and space vehicles
18046:2006)
ISO * Space systems — Space debris miti-
24113:2011 gation requirements

10 ISO Update, Supplement to ISO Focus -- June 2011

TC 21 Equipment for fire protection TC 51 Pallets for unit load method of
and fire fighting materials handling
ISO
ISO * Fire detection and alarm systems — S 8611-1:2011 Pallets for materials handling — Flat N
7240-6:2011 Part 6: Carbon monoxide fire detectors pallets — Part 1: Test methods F
using electro-chemical cells ISO E
R 8611-2:2011 Pallets for materials handling — Flat D
ISO * Fire extinguishing media — Foam pallets — Part 2: Performance require- L
7203-1:2011 concentrates — Part 1: Specification ISO ments and selection of tests K
for low-expansion foam concentrates 8611-3:2011
for top application to water-immiscible Pallets for materials handling — Flat E
liquids R TC 54 pallets — Part 3: Maximum working S
ISO 3140:2011 loads W
ISO * Fire extinguishing media — Foam U
7203-2:2011 concentrates — Part 2: Specification TC 59 Essential oils
for medium- and high-expansion foam C
concentrates for top application to F ISO Oil of sweet orange [Citrus sinensis (L.) C
water-immiscible liquids 15686-1:2011 Osbeck], obtained by physical extrac- B
tion of the peel
TC 29 Small tools TC 61
ISO Buildings and civil engineering
ISO 6462:2011 Face and shoulder milling cutters with U 6721-1:2011 works
indexable inserts — Dimensions TC 67
Buildings and constructed assets —
TC 30 Measurement of fluid flow in H Service life planning — Part 1: General
closed conduits ISO principles and framework
15156-1:2009
ISO Input/output protocols and elec- Plastics
22158:2011 tronic interfaces for water meters D
— Requirements ISO Plastics — Determination of dynamic
15156-2:2009 mechanical properties — Part 1: Gen-
TC 34 Food products eral principles
N
ISO Animal and vegetable fats and oils ISO Materials, equipment and off-
12966-2:2011 — Gas chromatography of fatty acid 15156-3:2009 shore structures for petroleum,
methyl esters — Part 2: Preparation of petrochemical and natural gas
methyl esters of fatty acids C industries

TC 35 Paints and varnishes ISO Petroleum and natural gas industries
13501:2005 — Materials for use in H2S-containing
ISO Paints and varnishes — Determina- R TC 76 environments in oil and gas production
1518-1:2011 tion of scratch resistance — Part 1: — Part 1: General principles for selec-
Constant-loading method ISO tion of cracking-resistant materials
C 8536-5:2004
TC 37 Terminology and other language Petroleum and natural gas industries
and content resources TC 83 — Materials for use in H2S-containing
J ISO 7794:2011 environments in oil and gas production
ISO * Language resource management — — Part 2: Cracking-resistant carbon
24619:2011 Persistent identification and sustain- and low-alloy steels, and the use of
able access (PISA) cast irons

TC 38 Textiles Petroleum and natural gas industries
— Materials for use in H2S-containing
ISO 3759:2011 Textiles — Preparation, marking and environments in oil and gas produc-
measuring of fabric specimens and tion — Part 3: Cracking-resistant CRAs
garments in tests for determination of (corrosion-resistant alloys) and other
dimensional change alloys

TC 39 Machine tools Petroleum and natural gas industries
— Drilling fluids — Processing systems
ISO Test code for machine tools — Part 10: evaluation
230-10:2011 Determination of the measuring perfor-
mance of probing systems of numeri- Transfusion, infusion and
cally controlled machine tools injection, and blood process-
ing equipment for medical and
TC 44 Welding and allied processes pharmaceutical use

ISO Welding consumables — Test methods Infusion equipment for medical use —
15792-3:2011 — Part 3: Classification testing of posi- Part 5: Burette infusion sets for single
tional capacity and root penetration of use, gravity feed
welding consumables in a fillet weld
Sports and recreational
ISO 6947:2011 Welding and allied processes — Weld- equipment
ing positions
Cross-country skis — Ski-binding
TC 45 Rubber and rubber products ISO screws — Requirements
ISO XZ 10228:2011
7751:1991/ Rubber and plastics hoses and hose Cross-country skis — Binding mount-
Amd 1:2011 assemblies — Ratios of proof and TC 84 ing area — Requirements for test
burst pressure to maximum working screws
ISO pressure — Amendment 1: Replace- XZ
1125:1999/ ment of "design working pressure" by Devices for administration of
Amd 1:2011 "maximum working pressure" through- medicinal products and intra-
out text vascular catheters

Rubber compounding ingredients
— Carbon black — Determination of
ash — Amendment 1: Insertion of ad-
ditional item in test report

ISO Update, Supplement to ISO Focus -- June 2011 11

ISO Sharps injury protection — Require- TC 150 Implants for surgery
23908:2011 ments and test methods — Sharps
protection features for single-use F ISO/TS Cardiovascular implants and extracor-
hypodermic needles, introducers for 12417:2011 poreal systems — Vascular device- T
catheters and needles used for blood R drug combination products X
sampling XZ
ISO * Guidance for the preparation and qual- XZ
TC 85 Nuclear energy, nuclear tech- E 23500:2011 ity management of fluids for haemodi-
nologies, and radiological H alysis and related therapies F
protection free U
TC 154 Processes, data elements and XZ
M documents in commerce, indus- D
ISO * Dosimetry for exposures to cosmic F try and administration XL
20785-2:2011 radiation in civilian aircraft — Part U K
2: Characterization of instrument E
response XB ISO/TS 15000- * Electronic Business Extensible Markup J
P 5:2005/Amd Language (ebXML) — Part 5: ebXML G
TC 89 Wood-based panels M 1:2011 Core Components Technical Specifica-
tion, Version 2.01(ebCCTS) — Amend- H
ISO 12460- Wood-based panels — Determination ment 1
4:2008/Amd of formaldehyde release — Part 4:
1:2011 Desiccator method — Amendment 1 TC 157 Non-systemic contraceptives
and STI barrier prophylactics
TC 94 Personal safety -- Protective
clothing and equipment ISO 7439:2011 * Copper-bearing contraceptive intrau-
terine devices — Requirements and
ISO/TS * Respiratory protective devices — tests
16974:2011 Marking and information supplied by
the manufacturer TC 159 Ergonomics

TC 114 Horology ISO/TR Basic human body measurements for
7250-2:2010 technological design — Part 2: Statisti-
cal summaries of body measurements
ISO Watch cases and accessories — Tests from individual ISO populations
23160:2011 of the resistance to wear, scratching
and impacts
TC 172 Optics and photonics

TC 121 Anaesthetic and respiratory ISO 11979- Ophthalmic implants — Intraocular
equipment 8:2006/Amd lenses — Part 8: Fundamental require-
1:2011 ments — Amendment 1
IEC 60601-1- * Medical electrical equipment — Part
11:2010/Cor 1-11: General requirements for basic ISO Ophthalmic optics — Contact lens
1:2011 safety and essential performance — 13212:2011 care products — Guidelines for deter-
Collateral standard: Requirements mination of shelf-life
for medical electrical equipment and
medical electrical systems used in the TC 184 Automation systems and
home healthcare environment — Tech- integration
nical Corrigendum 1
ISO * Industrial automation systems and
TC 130 Graphic technology 22093:2011 integration — Physical device control
— Dimensional Measuring Interface
ISO * Graphic technology — Prepress digital Standard (DMIS)
12640-4:2011 data exchange — Part 4: Wide gamut
display-referred standard colour image
data [Adobe RGB (1998)/SCID] TC 190 Soil quality

TC 138 Plastics pipes, fittings and ISO Soil quality — Determination of
valves for the transport of fluids 11709:2011 selected coal-tar-derived phenolic
compounds using high performance
ISO * Plastics pipes and fittings — Butt liquid chromatography (HPLC)
21307:2011 fusion jointing procedures for polyeth-
ylene (PE) pipes and fittings used in the TC 201 Surface chemical analysis
construction of gas and water distribu-
tion systems ISO * Surface chemical analysis — Sec-
13084:2011 ondary-ion mass spectrometry —
Calibration of the mass scale for a
ISO * Plastics piping systems for pressure time-of-flight secondary-ion mass
25780:2011 and non-pressure water supply, irriga- spectrometer
tion, drainage or sewerage — Glass-
reinforced thermosetting plastics (GRP) TC 204 Intelligent transport systems
systems based on unsaturated poly-
ester (UP) resin — Pipes with flexible ISO/TS * Electronic fee collection — Evaluation
joints intended to be installed using 13143-2:2011 of on-board and roadside equipment
jacking techniques for conformity to ISO/TS 12813 — Part
2: Abstract test suite

TC 145 Graphical symbols TC 206 Fine ceramics

ISO 7010:2011 Graphical symbols — Safety colours ISO * Fine ceramics (advanced ceramics,
and safety signs — Registered safety 13124:2011 advanced technical ceramics) — Test
signs method for interfacial bond strength of
ceramic materials
TC 146 Air quality
TC 210 Quality management and cor-
ISO * Air quality — Test method for filtra- responding general aspects for
11057:2011 tion characterization of cleanable filter medical devices
media

TC 147 Water quality ISO/TS * Medical devices — Hierarchical coding
19218-1:2011 structure for adverse events — Part 1:
Event-type codes
ISO Water quality — Sampling — Part 13:
5667-13:2011 Guidance on sampling of sludges

12 ISO Update, Supplement to ISO Focus -- June 2011

ISO Small-bore connectors for liquids and ISO/IEC * Information technology — Security
80369-1:2010 gases in healthcare applications — techniques — Evaluation criteria for IT
TC 213 Part 1: General requirements J 15408-2:2008 security — Part 2: Security functional XE
components XC
ISO 8015:2011 Dimensional and geometrical E ISO/IEC * XG
product specifications and R Information technology — Security
ISO verification 15408-3:2008 techniques — Evaluation criteria for IT V
10360-7:2011 L security — Part 3: Security assurance free
Geometrical product specifications D ISO/IEC * components
ISO (GPS) — Fundamentals — Concepts, 18045:2008 free
16610-21:2011 principles and rules Information technology — Security free
TC 221 ISO/IEC * techniques — Methodology for IT
ISO Geometrical product specifications 27005:2011 security evaluation G
10769:2011 (GPS) — Acceptance and reverifica- free
tion tests for coordinate measuring ISO/IEC * Information technology — Security free
machines (CMM) — Part 7: CMMs techniques — Information security risk free
equipped with imaging probing 13818-4:2004/ management
systems J
Cor 2:2011 Information technology — Generic S
Geometrical product specifications coding of moving pictures and as-
(GPS) — Filtration — Part 21: Linear ISO/IEC * sociated audio information — Part Q
profile filters: Gaussian filters 14496- * 4: Conformance testing — Technical
12:2008/Cor * Corrigendum 2 Q
Geosynthetics 4:2011 T
Information technology — Coding of free
Clay geosynthetic barriers — Determi- ISO/IEC audio-visual objects — Part 12: ISO
nation of water absorption of bentonite 14496- base media file format — Technical
15:2010/Cor Corrigendum 4
ISO Clay geosynthetic barriers — Determi- E 1:2011
10773:2011 nation of permeability to gases Information technology — Coding of
ISO/IEC audio-visual objects — Part 15: Ad-
TC 229 Nanotechnologies U 14496-25:2011 vanced Video Coding (AVC) file format
— Technical Corrigendum 1
ISO/TR * Nanotechnologies — Nanomaterial risk
13121:2011 evaluation Information technology — Coding of
audio-visual objects — Part 25: 3D
ISO Nanotechnologies — Endotoxin test K ISO/IEC * Graphics Compression Model
29701:2010 on nanomaterial samples for in vitro 14496- *
systems — Limulus amebocyte lysate C 26:2010/Cor * Information technology — Coding of
(LAL) test R 3:2011 audio-visual objects — Part 26: Audio
S conformance — Technical Corrigen-
IULTCS International Union of Leather free ISO/IEC dum 3
Technologists and Chemists XE 15444-
Societies XZ 12:2008/Cor Information technology — JPEG 2000
R 4:2011 image coding system — Part 12: ISO
ISO Leather — Chemical determination of base media file format — Technical
17226-3:2011 formaldehyde content — Part 3: De- ISO/IEC Corrigendum 4
termination of formaldehyde emissions 23000-9:2008/
from leather Amd 1:2010/ Information technology — Multimedia
Cor 1:2011 application format (MPEG-A) — Part
9: Digital Multimedia Broadcasting
JTC 1 Information technology application format — Amendment 1:
Conformance and reference software
ISO/IEC/IEEE * Systems and software engineering — ISO/IEC * — Technical Corrigendum 1
26512:2011 Requirements for acquirers and suppli-
ers of user documentation Information technology — MPEG ex-
23006-1:2011 tensible middleware (MXM) — Part 1:
MXM architecture and technologies
ISO/IEC TR * Software engineering — Lifecycle ISO/IEC TR *
29110-5-1- profiles for Very Small Entities (VSEs) Information technology — Radio
2:2011 — Part 5-1-2: Management and engi- 18047-3:2011 frequency identification device con-
neering guide: Generic profile group: formance test methods — Part 3: Test
Basic profile methods for air interface communica-
tions at 13,56 MHz
ISO/IEC * Identification cards — Integrated circuit
Information technology — Automatic
24727-4:2008/ card programming interfaces — Part ISO/IEC identification and data capture (AIDC)
19762-1:2008 techniques — Harmonized vocabu-
Cor 1:2011 4: Application programming interface lary — Part 1: General terms relating
to AIDC
(API) administration — Technical Cor-
Information technology — Interoper-
rigendum 1 ability with assistive technology (AT)
— Part 1: Requirements and recom-
ISO/IEC * Information technology — Program- ISO/IEC * mendations for interoperability
16262:2011 ming languages, their environments
and system software interfaces — EC- Information technology — Learning,
MAScript language specification 13066-1:2011 education and training — Conceptual
Reference Model for Competency
ISO/IEC * Information technology — Computer Information and Related Objects

18042-4:2006/ graphics and image processing — ISO/IEC TR * Information technology — Biometric
24763:2011 application programming interface
Amd 1:2011 Spatial Reference Model (SRM) lan- — Part 2: Biometric archive function
provider interface — Technical Cor-
guage bindings — Part 4: C — Amend- rigendum 1

ment 1: .

ISO/IEC * Information technology — Security ISO/IEC *
9797-2:2011 techniques — Message Authentication
Codes (MACs) — Part 2: Mechanisms 19784-2:2007/
using a dedicated hash-function
Cor 1:2011

ISO Update, Supplement to ISO Focus -- June 2011 13

Standards confirmed ISO 15892:2000 (replaced by )
ISO 15894:2000 (replaced by )
The following International Standards are confimred for a five year TC 21 Equipment for fire protection and fire
period: fighting
ISO 6309:1987 (replaced by ISO 7010:2011)
TC 22 Road vehicles TC 22 Road vehicles
ISO 7578:2008 ISO 303:2002 (replaced by )
TC 38 Textiles ISO 3267:1991 (replaced by )
ISO 9073-16:2007 ISO 3559:1976 (replaced by )
ISO 17751:2007 (reconfirmed) ISO 4182:1999 (replaced by )
ISO 2:1973 Pulleys and belts (including veebelts) ISO 7227:1987 (replaced by )
TC 41 ISO 8218:1989 (replaced by )
ISO 22721:2007 Freight containers ISO 6970:1994 (replaced by )
TC 104 TC 34 Food products
ISO 18185-1:2007 Mechanical vibration, shock and condi- ISO 6564:1985 (replaced by )
ISO 18185-4:2007 tion monitoring TC 35 Paints and varnishes
ISO 18185-5:2007 (reconfirmed) ISO 1518:1992 (replaced by ISO 1518-1:2011)
TC 108 (reconfirmed) TC 37 Terminology and other language and
(reconfirmed) content resources
ISO 5349-1:2001 (reconfirmed) ISO 1087-2:2000 (replaced by )
ISO 5349-2:2001 (reconfirmed) TC 44 Welding and allied processes
ISO 10227:1996 Hydrometry ISO 9455-12:1992 (replaced by )
ISO 10326-2:2001 (reconfirmed) TC 51 Pallets for unit load method of materi-
ISO 13091-1:2001 (reconfirmed) als handling
TC 113 (reconfirmed) ISO/TS (replaced by ISO 8611-2:2011)
ISO/TR 9210:1992 (reconfirmed) 8611-2:2005
ISO 9555-1:1994 (reconfirmed) ISO/TS (replaced by ISO 8611-3:2011)
ISO 9555-3:1992 8611-3:2005
ISO 9555-4:1992 Earth-moving machinery TC 59 Buildings and civil engineering works
ISO/TR (reconfirmed) ISO 9048:1987 (replaced by )
11656:1993 TC 68 Financial services
ISO 748:2007 (reconfirmed) ISO 15668:1999 (replaced by )
TC 127 (reconfirmed) TC 85 Nuclear energy, nuclear technologies,
ISO 4510-1:1987 (reconfirmed) and radiological protection
ISO 6011:2003 (reconfirmed) ISO 1757:1996 (replaced by )
ISO 6012:1997 (reconfirmed) TC 108 Mechanical vibration, shock and condi-
ISO 6302:1993 (reconfirmed) tion monitoring
ISO 6749:1984 (reconfirmed) ISO 5347-10:1993 (replaced by )
ISO 7129:1997 (reconfirmed) TC 113 Hydrometry
ISO 7852:1983 (reconfirmed) ISO 9555-2:1992 (replaced by )
ISO 8152:1984 TC 130 Graphic technology
ISO 8925:1989 ISO 15930-5:2003 (replaced by )
ISO 9247:1990 TC 136 Furniture
ISO 11862:1993 ISO 7172:1988 (replaced by )
ISO 15717:1998 (replaced by )
Standards withdrawn TC 150 Implants for surgery
ISO/TR 9325:1989 (replaced by )
Period from 01 May to 31 May 2011 ISO/TR 9326:1989 (replaced by )
TC 213 Dimensional and geometrical product
TC 8 Ships and marine technology specifications and verification
ISO 18072-1:2007 (replaced by ) ISO 11562:1996 (replaced by ISO 16610-21:2011)
TC 20 Aircraft and space vehicles JTC 1 Information technology
ISO 15891:2000 (replaced by ) ISO/IEC ISP (replaced by )
10608-7:1998
ISO/IEC ISP (replaced by )
10608-8:1998
ISO/IEC ISP (replaced by )
10609-16:1998

14 ISO Update, Supplement to ISO Focus -- June 2011

ISO/IEC ISP (replaced by ) 3 Pretoria (South TC 96/SC 9 Cranes/Bridge and
10609-17:1998 (replaced by ) Africa) TC 96 gantry cranes
(replaced by )
ISO/IEC ISP (replaced by ) 4 Pretoria (South Cranes
10613-19:1998 (replaced by ) Africa)
(replaced by ) TC 96/SC 2 Cranes/Terminology
ISO/IEC ISP (replaced by ) 4 Pretoria (South
10613-20:1998 (replaced by ) Africa) TC 96/SC 10 Cranes/Design princi-
(replaced by ISO/IEC/IEEE 26512:2011) ples and requirements
ISO/IEC ISP (replaced by ) 4 Pretoria (South
10615-5:1998 (replaced by ) Africa) TC 145/SC 1 Graphical symbols/
(replaced by ) Public information
ISO/IEC ISP 6 Vienna (Austria) symbols
11182-1:1993
6-7 Paris (France) TC 22/SC 4 Road vehicles/Cara-
ISO/IEC ISP vans and light trailers
12069-6:1998 6-10 Rochester (USA)
7 Vienna (Austria) TC 42 Photography
ISO/IEC ISP
12072:1998 7 Vienna (Austria) TC 145/SC 2 Graphical symbols/
Safety identification,
ISO/IEC ISP 7-10 Beijing (China) signs, shapes, sym-
15125-4:1998 bols and colours
8 Cannes (France)
ISO/IEC TC 145/SC 3 Graphical symbols/
15910:1999 Graphical symbols for
use on equipment
ISO/IEC
1539-3:1999 TC 232 Learning services for
non-formal education
ISO/IEC and training
15292:2001
TC 35/SC 12 Paints and varnishes/
ISO/IEC TR Preparation of steel
24784:2009 substrates before ap-
plication of paints and
related products

8 Cannes (France) TC 35/SC 14 Paints and varnishes/
Protective paint
Meeting calendar 8 Vienna (Austria) systems for steel
8-9 Troy (USA) structures

9 Düsseldorf TC 145 Graphical symbols
(Germany)
(update at 01 May 2011) TC 22/SC 11 Road vehicles/Safety
Meetings called for the month of April are not in this edition. 9 Cannes (France) glazing materials
* Information definite but meeting not yet formally convened
** Provisional 9-10 Vienna (Austria) TC 17/SC 15 Steel/Railway rails
10 Helsinki (Finland) and their fasteners

10 Cannes (France) TC 35/SC 9 Paints and varnishes/
10 Vancouver General test meth-
May-June 2011 TC 8/SC 2 Ships and marine ods for paints and
30-1 Lisbon (Portugal) technology/Ma- (Canada) varnishes
TC 223 rine environment 13-15 Vancouver
TC 96/SC 6 protection TC 91 Surface active agents
(Canada)
Societal Security JTC 1/SC 2 Information technol-
13-17 Seoul (Korea, ogy/Coded character
30-3 Berlin (Germany) Cranes/Mobile cranes Republic of) sets
31-1
Pretoria (South 13-17 Vancouver TC 35 Paints and varnishes
31-1 Africa) (Canada)
TC 192 Gas turbines
Beijing (China) 13-17 Vancouver
TC 257 General technical (Canada)
rules for determina-
tion of energy savings 13-17 Vancouver TC 121/SC 8 Anaesthetic and res-
in renovation projects, (Canada) piratory equipment/
industrial enterprises Suction devices for
and regions hospital and emer-
gency care use

June 2011 TC 37 Terminology and
1 Pretoria (South other language and
TC 96/SC 4 Cranes/Test methods content resources
Africa)
1 Pretoria (South TC 96/SC 8 Cranes/Jib cranes TC 121 Anaesthetic and res-
piratory equipment
Africa)
2 London (United TC 85/SC 5 Nuclear energy, TC 121/SC 1 Anaesthetic and res-
nuclear technolo- piratory equipment/
Kingdom) TC 96/SC 5 gies, and radiological Breathing attach-
TC 96/SC 3 protection/Nuclear ments and anaes-
2 Pretoria (South fuel cycle thetic machines
Africa)
Cranes/Use, opera- TC 121/SC 2 Anaesthetic and res-
3 Pretoria (South tion and maintenance piratory equipment/
Africa) Airways and related
Cranes/Selection of equipment
wire ropes

ISO Update, Supplement to ISO Focus -- June 2011 15

13-17 Vancouver TC 121/SC 3 Anaesthetic and res- 27-29 Washington, D.C TC 258 Project, programme
(Canada) piratory equipment/ (USA) and portfolio
TC 121/SC 6 Lung ventilators and management
TC 17/SC 17 related equipment 27-30 Suresnes
TMB (France) TC 20/SC 1 Aircraft and
TC 121/SC 4 Anaesthetic and res- space vehicles/
13-17 Vancouver piratory equipment/ 28 Oslo (Norway) Aerospace electrical
(Canada) TC 29/SC 5 Medical gas systems requirements
TC 17/SC 4 28-29 Düsseldorf
14-15 Milan (Italy) TC 51 Steel/Steel wire rod (Germany) TC 207/SC 2 Environmental
TC 259 and wire products management/Environ-
14-15 Geneva TC 4 28-29 Kuala Lumpur mental auditing and
(Switzerland) Technical Manage- (Malaysia) related environmental
ment Board investigations
14-16 Vancouver 29 Berlin (Germany)
(Canada) Anaesthetic and TC 17/SC 11 Steel/Steel castings
respiratory equip- 29 Oslo (Norway)
ment/Anaesthesia TC 228 Tourism and related
terminology 29-30 London (United services
15 Stockholm Kingdom)
15-16 (Sweden) Small tools/Grinding TC 44/SC 6 Welding and allied
16 wheels and abrasives 30 San Francisco processes/Resistance
Düsseldorf (USA) welding and allied
(Germany) Steel/Heat treatable mechanical joining
and alloy steels June-July 2011
London (United 21-1 Hangzhou TC 207/SC 1 Environmental
Kingdom) Pallets for unit load management/Environ-
method of materials (China) mental management
16-17 Sofia (Bulgaria) handling 25-1 Oslo (Norway) systems
25-1 Oslo (Norway)
17 Brussels Project committee: TC 29/SC 10 Small tools/Assem-
(Belgium) Outsourcing 30-1 Pisa (Italy) bly tools for screws
and nuts, pliers and
20-21 Düsseldorf Rolling bearings July 2011 nippers
(Germany) 1 Berlin (Germany)
TC 167 Steel and aluminium TC 67/SC 3 Materials, equipment
20-21 Milan (Italy) TC 252 structures 1 Paris (France) and offshore struc-
4-6 Kyoto (Japan) tures for petroleum,
20-22 Bourne- TC 34/SC 9 Project committee: petrochemical and
mouth (United Natural gas fuelling 12-15 Delft natural gas industries/
Kingdom) stations for vehicles (Netherlands) Drilling and comple-
tion fluids, and well
20-24 Hong Kong Food products/ 18-21 Berlin (Germany) cements
(Hong Kong, Microbiology
China) 18-22 Berlin (Germany)
TC 71 Concrete, reinforced 18-22 Berlin (Germany)
21 Berlin (Germany) concrete and pre-
stressed concrete

TC 10/SC 1 Technical product JTC 1/SC 28 Information technol-
documentation/Basic ogy/Office equipment
conventions
TC 207 Environmental
management
21 Berlin (Germany) TC 10/SC 8 Technical prod-
uct documenta-
tion/Construction TC 207/SC 3 Environmental man-
documentation agement/Environmen-
tal labelling

21-24 Pretoria (South TC 137 Footwear sizing des- TC 22/SC 3 Road vehicles/Elec-
Africa) ignations and marking trical and electronic
systems equipment
22 Berlin (Germany)
TC 10/SC 6 Technical product
documentation/Me-
chanical engineering TC 94/SC 6 Personal safety --
documentation Protective clothing
and equipment/Eye
22 Berlin (Germany) TC 10/SC 10 Technical product and face protection
documentation/
Process plant TC 188 Small craft
documentation and
tpd-symbols JTC 1/SC 37 Information
technology/
23 Berlin (Germany) TC 10 Technical product Biometrics
24 San Diego (USA) documentation
REMCO Committee on refer-
ence materials
JTC 1/SC 6 Information technol-
ogy/Telecommunica-
tions and information TC 69/SC 5 Applications of sta-
exchange between tistical methods/Ac-
systems ceptance sampling

25 Reggio Emilia TC 22/SC 25 Road vehicles/Vehi- TC 69 Applications of statis-
(Italy) cles using gaseous tical methods
fuels
27-29 Winterthur TC 69/SC 4 Applications of statis-
(Switzerland) tical methods/Appli-
TC 21/SC 5 Equipment for fire cations of statistical
protection and methods in process
fire fighting/Fixed management
firefighting systems
using water

16 ISO Update, Supplement to ISO Focus -- June 2011

18-22 Berlin (Germany) TC 69/SC 6 Applications of statis- 13-15 Moscow (Rus- TC 67 Materials, equipment
tical methods/Meas- sian Federation) and offshore struc-
urement methods and tures for petroleum,
results petrochemical and
natural gas industries
18-22 Berlin (Germany) TC 69/SC 7 Applications of
statistical methods/
Applications of 14 Geneva TC 154 Processes, data
statistical and related (Switzerland) elements and
techniques for the documents in com-
implementation of Six merce, industry and
Sigma administration

14-15 Helsinki (Finland) TC 17/SC 16 Steel/Steels for
the reinforcement
18-22 Berlin (Germany) TC 69/SC 8 Applications of sta- and prestressing of
tistical methods/Ap- concrete
plication of statistical
and related methodol- 14-15 Chicago (USA) TC 163 Thermal performance
ogy for new technol- and energy use in the
ogy and product built environment
development

19-22 Berlin (Germany) TC 69/SC 1 Applications of statis- 15 Florianopolis TC 150/SC 4 Implants for sur-
tical methods/Termi- (Brazil) gery/Bone and joint
nology and symbols replacements

19-22 Pretoria (South * TC 133 Sizing systems and 15 Brescia (Italy) TC 201/SC 1 Surface chemical
Africa) designations for analysis/Terminology
clothes
15 Brescia (Italy) * TC 201/SC 2 Surface chemical
analysis/General
23 Turin (Italy) JTC 1/SC 29 Information technol- procedures
ogy/Coding of audio,
picture, multimedia 15 Brescia (Italy) * TC 201/SC 9 Surface chemical
and hypermedia analysis/Scanning
information probe microscopy

26-27 Berlin (Germany) TC 261 Additive 15-17 Brescia (Italy) TC 201 Surface chemical
manufacturing analysis

August 2011 15-22 Beijing (China) ** TC 213 Dimensional and
geometrical product
26 Rapid City (USA) JTC 1/SC 24 Information technol- specifications and
ogy/Computer graph- verification
ics, image processing
and environmental 16 Brescia (Italy) TC 201/SC 4 Surface chemi-
data representation cal analysis/Depth
profiling
August-September 2011
16 Brescia (Italy) * TC 201/SC 5 Surface chemical
29-2 Warsaw (Poland) * JTC 1/SC 35 Information technol- analysis/Auger elec-
ogy/User interfaces tron spectroscopy

September 2011 16 Brescia (Italy) * TC 201/SC 7 Surface chemi-
cal analysis/X-ray
7 Kobe (Japan) TC 8/SC 1 Ships and marine photoelectron
technology/Lifesaving spectroscopy
and fire protection

8 Paris (France) TC 17/SC 7 Steel/Methods of 16-22 Berlin (Germany) TC 130 Graphic technology
testing (other than
mechanical tests and 17 Brescia (Italy) * TC 201/SC 3 Surface chemi-
chemical analysis) cal analysis/Data
management and
10-17 Shanghai (China) JTC 1/SC 36 Information tech- treatment
nology/Information
technology for learn- 17 Brescia (Italy) TC 201/SC 8 Surface chemical
ing, education and analysis/Glow dis-
training charge spectroscopy

12-14 Chicago (USA) TC 205 Building environment 18-24 Phoenix (USA) TC 106 Dentistry
design
18-24 Paris (France) * TC 164 Mechanical testing of
metals
12-16 Vienna (Austria) TC 108/SC 4 Mechanical vibration,
shock and condition 19 Chicago (USA) * TC 21/SC 3 Equipment for fire
monitoring/Human protection and fire
exposure to me- fighting/Fire detection
chanical vibration and and alarm systems
shock
19-20 Copenhagen JTC 1/SC 22 Information technol-
(Denmark) ogy/Programming
12-16 Florianopolis TC 150 Implants for surgery languages, their envi-
(Brazil) ronments and system
software interfaces
12-16 Florianopolis * TC 150/SC 1 Implants for surgery/
(Brazil) Materials 19-20 La Plaine St- TC 164/SC 3 Mechanical testing
Denis (France) of metals/Hardness
12-16 London (United TC 262 Project committee: testing
Kingdom) Risk management

13-14 Florianopolis TC 150/SC 5 Implants for surgery/ 19-20 New Delhi (India) * TMB Technical Manage-
(Brazil) Osteosynthesis and ment Board
spinal devices

ISO Update, Supplement to ISO Focus -- June 2011 17

19-22 Paris (France) * TC 164/SC 4 Mechanical testing 22 Adelaide ** TC 190/SC 7 Soil quality/Soil and
of metals/Toughness (Australia) site assessment
testing -- Fracture (F),
Pendulum (P), Tear (T) 22-23 Las Vegas (USA) TC 159/SC 4 Ergonomics/Ergo-
nomics of human-
19-23 Seoul (Korea, JTC 1/SC 38 Information tech- system interaction
Republic of) nology/Distributed
application platforms 22-23 La Plaine St- TC 164/SC 1 Mechanical testing
and services (DAPS) Denis (France) of metals/Uniaxial
testing

19-23 Bali (Indonesia) * TC 165 Timber structures 23 Chicago (USA) * TC 21 Equipment for fire
protection and fire
19-23 Adelaide TC 190 Soil quality fighting
(Australia)

20 Chicago (USA) TC 21/SC 6 Equipment for fire 23 La Plaine St- TC 79 Light metals and their
protection and fire Denis (France) alloys
fighting/Foam and
powder media and 23 Adelaide * TC 190/SC 2 Soil quality/Sampling
fixed firefighting sys- (Australia)
tems using foam and
powder 23 Adelaide ** TC 190/SC 3 Soil quality/Chemi-
(Australia) cal methods and soil
characteristics
20 Berlin (Germany) TC 29/SC 8 Small tools/Tools
for pressing and
moulding 24 New Delhi (India) * COUNCIL Council

25-26 London (United TC 254 Safety of amusement
Kingdom) rides and amusement
20-22 Paris (France) * TC 164/SC 5 Mechanical testing of devices
metals/Fatigue testing

20-23 Paris (France) TC 59/SC 8 Buildings and civil 26-27 Geneva * TAG 8 Building
engineering works/ (Switzerland)
Sealants
26-30 Kharkov TC 218 Timber
(Ukraine)
20-23 Gaithersburg TC 172/SC 5 Optics and photon-
(USA) ics/Microscopes and 27 Valencia (Spain) * IULTCS International Union
endoscopes of Leather Technolo-
gists and Chemists
21 Chicago (USA) TC 21/SC 2 Equipment for fire Societies
protection and fire
fighting/Manu- 28 La Plaine St- TC 206 Fine ceramics
ally transportable fire Denis (France)
extinguishers
29-30 Riverside (USA) * TC 58/SC 2 Gas cylinders/Cylin-
21 Vienna (Austria) * TC 146/SC 6 Air quality/Indoor air der fittings

21 Paris (France) TC 164/SC 2 Mechanical testing Edinburgh (Unit- ** TC 24/SC 4 Particle charac-
of metals/Ductility ed Kingdom) terization includ-
testing ing sieving/Particle
characterization
21 Adelaide TC 190/SC 1 Soil quality/Evaluation
(Australia) of criteria, terminol- (Unknown) ** TC 44/SC 9 Welding and allied
ogy and codification processes/Health and
safety
21-22 Chicago (USA) TC 21/SC 8 Equipment for fire
protection and fire
fighting/Gaseous London (United ** TC 59/SC 2 Buildings and civil
media and firefighting Kingdom) engineering works/
systems using gas Terminology and
harmonization of
21-23 New Delhi (India) ** GA General Assembly languages

21-23 Amsterdam TC 225 Market, opinion and (Malaysia) ** TC 61/SC 4 Plastics/Burning
(Netherlands) social research behaviour

22 Chicago (USA) TC 21/SC 11 Equipment for fire 3rd Quarter 2011
protection and fire
fighting/Smoke and Sapporo (Japan) ** TC 184/SC 1 Automation systems
heat control systems and integration/Physi-
and components cal device control

22 La Plaine St- TC 79/SC 2 Light metals and Mexico (Mexico) ** TC 253 Project committee:
Denis (France) their alloys/Or- Treated wastewater
ganic and anodic re-use for irrigation
oxidation coatings on
aluminium October 2011

3-6 Dublin (Ireland) TC 34/SC 17 Food products/Man-
agement systems for
22 La Plaine St- * TC 79/SC 6 Light metals and food safety

Denis (France) their alloys/Wrought

aluminium and alu- 3-7 London (United * TC 146/SC 2 Air quality/Workplace

minium alloys Kingdom) atmospheres

22 La Plaine St- * TC 79/SC 9 Light metals and their 6 San Antonio * TC 92/SC 2 Fire safety/Fire
(USA) containment
Denis (France) alloys/Symbolization

22 Sao Paulo ** TC 142 Cleaning equipment 6-7 Geneva * CASCO Committee on con-
(Brazil) for air and other (Switzerland) formity assessment
gases
7 Sydney TC 89 Wood-based panels
22 Adelaide TC 190/SC 4 Soil quality/Biological (Australia)
(Australia) methods

18 ISO Update, Supplement to ISO Focus -- June 2011

9 Beijing (China) TC 27/SC 1 Solid mineral fuels/ 21 Courbevoie, * TC 244 Industrial furnaces
Coal preparation: and associated pro-
Terminology and Paris (France) cessing equipment
performance
24-28 Moscow (Rus- ** TC 178 Lifts, escalators and
9-14 Beijing (China) * TC 27 Solid mineral fuels sian Federation) moving walks

10 Beijing (China) TC 27/SC 5 Solid mineral fuels/ 24-28 Ottawa (Canada) TC 181 Safety of toys
Methods of analysis
24-29 Beijing (China) * TC 176 Quality management
and quality assurance
10-14 (Unknown) ** TC 25 Cast irons and pig
irons
25 Beltsville, Mary- TC 34/SC 16 Food products/Hori-
land (USA) zontal methods for
10-14 Dublin (Ireland) TC 94/SC 15 Personal safety -- molecular biomarker
Protective clothing analysis
and equipment/
Respiratory protective 25 Osaka (Japan) TC 38/SC 23 Textiles/Fibres and
devices yarns

10-14 Nanjing (China) TC 193 Natural gas 25 London (United * TC 41/SC 3 Pulleys and belts

10-14 Nanjing (China) ** TC 193/SC 1 Natural gas/Analysis Kingdom) (including veebelts)/
of natural gas
Conveyor belts

10-14 Tampa, Florida * TC 204 Intelligent transport 25-28 Amsterdam ** TC 138/SC 1 Plastics pipes, fittings
(USA) systems (Netherlands) and valves for the
transport of fluids/
10-14 Milan (Italy) * TC 209 Cleanrooms and as- Plastics pipes and
sociated controlled fittings for soil, waste
environments and drainage (includ-
ing land drainage)
10-14 Washington, D.C TC 251 Project committee:
(USA) Asset management
26 Osaka (Japan) TC 38/SC 24 Textiles/Condition-
ing atmospheres and
11-12 Paris (France) * TC 17/SC 20 Steel/General techni- physical tests for
cal delivery condi- textile fabrics
tions, sampling and
mechanical testing 26 London (United * TC 41/SC 4 Pulleys and belts
methods
Kingdom) (including veebelts)/

16-21 Suzhou (China) * TC 184/SC 4 Automation systems Synchronous belt
and integration/Indus-
trial data drives

17 Berlin (Germany) * TC 2/SC 7 Fasteners/Reference 26 Amsterdam * TC 138/SC 2 Plastics pipes, fittings
standards (Netherlands) and valves for the
transport of fluids/
17 Beijing (China) * TC 111 Round steel link Plastics pipes and
chains, chain slings, fittings for water
components and supplies
accessories
26 Amsterdam ** TC 138/SC 4 Plastics pipes, fittings
17 Beijing (China) TC 111/SC 1 Round steel link (Netherlands) and valves for the
chains, chain slings, transport of fluids/
components and ac- Plastics pipes and
cessories/Chains and fittings for the supply
chain slings of gaseous fuels

17 Beijing (China) TC 111/SC 3 Round steel link 26-27 Alicante (Spain) TC 216 Footwear
chains, chain
slings, components 26-28 Troy (USA) * TC 22 Road vehicles
and accessories/
Components and 26-28 Nanjing (China) * TC 70 Internal combustion
accessories engines

27 Osaka (Japan) TC 38 Textiles

17-20 Yokohama * TC 45/SC 2 Rubber and rubber 27 London (United * TC 41/SC 1 Pulleys and belts
(Japan) products/Testing and
analysis Kingdom) (including veebelts)/

Friction

19 Berlin (Germany) * TC 2/SC 12 Fasteners/Fasteners 27 Amsterdam ** TC 138/SC 3 Plastics pipes, fittings
with metric internal (Netherlands) and valves for the
thread transport of fluids/
Plastics pipes and
17-21 Yokohama * TC 45 Rubber and rubber fittings for industrial
(Japan) products applications

18 Berlin (Germany) * TC 2/SC 11 Fasteners/Fasteners 27-28 (Europe) ** TC 44 Welding and allied
with metric external processes
thread
28 London (United * TC 41 Pulleys and belts
18-20 London (United * TC 202 Microbeam analysis Kingdom) (including veebelts)
Kingdom)
31 Melbourne * JTC 1/SC 25 Information technolo-
19 Berlin (Germany) * TC 2 Fasteners (Australia) gy/Interconnection of
information technol-
20-21 Berlin (Germany) TC 2/SC 14 Fasteners/Surface ogy equipment
coatings

21 Brussels ** TC 92/SC 1 Fire safety/Fire initia- (Korea, Repub- ** JTC 1/SC 17 Information technol-
(Belgium) tion and growth lic of) ogy/Cards and per-
sonal identification
21 Ottawa (Canada) ** TC 92/SC 4 Fire safety/Fire safety
engineering

ISO Update, Supplement to ISO Focus -- June 2011 19

London (United ** TC 59/SC 15 Buildings and civil 10-11 Washington, D.C TC 260 Human resource
Kingdom) engineering works/ (USA) management
Performance criteria
for single family at- 13-18 Tel Aviv (Israel) ** TC 23/SC 18 Tractors and machin-
tached and detached ery for agriculture and
dwellings forestry/Irrigation and
drainage equipment
Paris (France) ** TC 87 Cork and systems

Ottawa (Canada) ** TC 92/SC 3 Fire safety/Fire 13-18 Pretoria (South * TC 211 Geographic in-
threat to people and Africa) formation/
environment Geomatics

(Netherlands) ** TC 138 Plastics pipes, fittings 14-16 Nagoya (Japan) ** TC 189 Ceramic tile
and valves for the
transport of fluids 14-18 (South Africa) ** TC 229 Nanotechnologies

Amsterdam ** TC 138/SC 5 Plastics pipes, fittings 17 Munich * TC 44/SC 12 Welding and allied
(Netherlands) and valves for the (Germany) processes/Soldering
transport of fluids/ materials
General properties
of pipes, fittings 21-22 Berlin (Germany) * TC 44/SC 8 Welding and allied
and valves of plastic processes/Equip-
materials and their ment for gas welding,
accessories -- Test cutting and allied
methods and basic processes
specifications
21-25 Stellenbosch ** TC 98 Bases for design of
(South Africa) structures

Vienna (Austria) ** TC 146/SC 1 Air quality/Stationary 22-25 Boulogne sur * TC 234 Fisheries and
source emissions Mer (France) aquaculture

Berlin (Germany) ** TC 160/SC 1 Glass in build- (Unknown) ** TC 34/SC 7 Food products/Spic-
ing/Product es, culinary herbs and
considerations condiments

October-November 2011 (Japan) ** TC 38/SC 24 Textiles/Condition-
ing atmospheres and
31-3 London (United ** TC 46/SC 11 Information and doc- physical tests for
Kingdom) umentation/Archives/ textile fabrics
records management

31-3 Bangkok * TC 238 Solid biofuels Pau (France) ** TC 67/SC 3 Materials, equipment
(Thailand) and offshore struc-
tures for petroleum,
November 2011 petrochemical and
natural gas industries/
2-3 (USA) ** TC 67/SC 7 Materials, equipment Drilling and comple-
and offshore struc- tion fluids, and well
tures for petroleum, cements
petrochemical and
natural gas industries/ (Jamaica) ** TC 93 Starch (includ-
Offshore structures ing derivatives and
by-products)
2-4 Bangkok * TC 123 Plain bearings
(Thailand)
December 2011

2-4 Bangkok * TC 123/SC 2 Plain bearings/Materi- 2 La Plaine St- * TC 158 Analysis of gases
(Thailand) als and lubricants, Denis (France)
their properties,
characteristics, test 12-16 Sydney * TC 108/SC 5 Mechanical vibration,
methods and testing (Australia) shock and condition
conditions monitoring/Condition
monitoring and diag-
2-4 Bangkok * TC 123/SC 3 Plain bearings/Dimen- nostics of machines
(Thailand) sions, tolerances and
construction details 4th Quarter 2011

2-4 Bangkok * TC 123/SC 5 Plain bearings/ (USA) ** TC 30/SC 7 Measurement of
(Thailand) Quality analysis and fluid flow in closed
assurance conduits/Volume
methods including
2-4 Bangkok * TC 123/SC 6 Plain bearings/Terms water meters
(Thailand) and common items

2-4 Bangkok * TC 123/SC 7 Plain bearings/Spe- (Japan) ** TC 172/SC 3 Optics and photon-
(Thailand) cial types of plain ics/Optical materials
bearings and components

3-4 Kyoto (Japan) * TC 33 Refractories January 2012

4 Cincinnati (USA) * TC 60 Gears Charlotte (USA) ** TC 213 Dimensional and
geometrical product
7-11 Osaka (Japan) ** TC 94/SC 13 Personal safety -- specifications and
Protective clothing verification
and equipment/Pro-
tective clothing January-February 2012

10 Annapolis (USA) * TC 70/SC 7 Internal combustion 30-4 Paris (France) ** TC 236 Project Committee:
engines/Tests for Project Management
lubricating oil filters

10-11 Venice (Italy) * TC 227 Springs

20 ISO Update, Supplement to ISO Focus -- June 2011

30-4 Paris (France) * TC 258 Project, programme Durban (South ** TC 135/SC 5 Non-destructive
and portfolio Africa) testing/Radiation
management methods

February 2012 May 2012

20-24 Kyoto (Japan) * JTC 1/SC 35 Information technol- 7-11 Berlin (Germany) ** TC 46 Information and
ogy/User interfaces documentation

22-23 Geneva * TMB Technical Manage- 7-11 Berlin (Germany) ** TC 46/SC 4 Information and
(Switzerland) ment Board documentation/Tech-
nical interoperability
Paris (France) ** TC 23/SC 2 Tractors and machin-
ery for agriculture and
forestry/Common 8 Chicago (USA) ** TC 68/SC 7 Financial services/
tests Core banking

10 Chicago (USA) ** TC 68 Financial services

Florida (USA) ** TC 115 Pumps 10-11 Tel Aviv (Israel) ** TC 184/SC 5 Automation systems
and integration/Inter-
(USA) ** TC 184/SC 2 Automation systems operability, integra-
and integration/ tion, and architec-
Robots and robotic tures for enterprise
devices systems and automa-
tion applications
February-March 2012

25-5 Toulouse ** TC 34/SC 12 Food products/Sen- 15 Buenos Aires ** TC 67/SC 5 Materials, equipment
(France) sory analysis (Argentina) and offshore struc-
tures for petroleum,
28-2 Berlin (Germany) ** TC 107 Metallic and other petrochemical and
inorganic coatings natural gas industries/
Casing, tubing and
March 2012 drill pipe

29 (Unknown) ** TC 23/SC 19 Tractors and machin-
ery for agriculture and
forestry/Agricultural 20-25 Jeju (Korea, * JTC 1/SC 7 Information technol-
electronics Republic of) ogy/Software and
systems engineering

(China) ** JTC 1/SC 6 Information technol- 21-25 (Unknown) ** JTC 1/SC 38 Information tech-
ogy/Telecommunica- nology/Distributed
tions and information application platforms
exchange between and services (DAPS)
systems

(Australia) ** JTC 1/SC 36 Information tech- 22 Delft ** TC 195 Building construc-
nology/Information (Netherlands) tion machinery and
technology for learn- equipment
ing, education and
training (Unknown) ** TC 126 Tobacco and tobacco
products

(Italy) ** TC 172/SC 7 Optics and photon- June 2012
ics/Ophthalmic optics
and instruments 4-8 Paris (France) ** TC 85 Nuclear energy,
nuclear technolo-
April 2012 gies, and radiological
protection
15-20 (USA) ** TC 110 Industrial trucks

15-20 (USA) ** TC 110/SC 1 Industrial trucks/Gen- 6-7 Geneva ** COPOLCO Committee on con-
eral terminology (Switzerland) sumer policy

15-20 (USA) ** TC 110/SC 2 Industrial trucks/ 13-14 Geneva * TMB Technical Manage-
Safety of powered (Switzerland) ment Board
industrial trucks
Calgary (Canada) ** TC 67/SC 3 Materials, equipment
and offshore struc-
16 Berlin (Germany) ** TC 161 Control and protec- tures for petroleum,
tive devices for gas petrochemical and
and/or oil burners and natural gas industries/
appliances Drilling and comple-
tion fluids, and well
16-17 Senlis (France) ** TC 117 Fans cements

16-20 Durban (South ** TC 135 Non-destructive
Africa) testing
Brugge (Belgium) ** TC 86/SC 6 Refrigeration and
air-conditioning/
16-20 Melbourne ** TC 204 Intelligent transport Testing and rating of
(Australia) systems air-conditioners and
heat pumps
25-26 Moscow (Rus- ** TC 67/SC 2 Materials, equipment
sian Federation) and offshore struc-
tures for petroleum, 2nd Quarter 2012
petrochemical and
natural gas industries/ (Greece) ** TC 92/SC 3 Fire safety/Fire
Pipeline transporta- threat to people and
tion systems environment

Bern ** TC 113 Hydrometry (France) ** TC 211 Geographic in-
(Switzerland) formation/
Geomatics

Durban (South ** TC 135/SC 3 Non-destructive test-
Africa) ing/Ultrasonic testing

ISO Update, Supplement to ISO Focus -- June 2011 21