Comet Series Sensors - Walker Industrial

5.5 Photoelectric Sensors

Comet Series Sensors

5 Comet Series Sensors Contents Page

5 Description V8-T5-55

5 Comet Series Sensors V8-T5-56
Product Overview . . . . . . . . . . . . . . . . . . . . . . V8-T5-57
5 Product Selection
Thru-Beam Sensors . . . . . . . . . . . . . . . . . . V8-T5-58
5 Reflex Sensors . . . . . . . . . . . . . . . . . . . . . . V8-T5-59
Diffuse Reflective and Focused Diffuse V8-T5-61
5 Reflective Sensors . . . . . . . . . . . . . . . . . . V8-T5-61
Perfect Prox Background Rejection Sensors V8-T5-62
5 Fiber Optic Sensors . . . . . . . . . . . . . . . . . . V8-T5-62
Glass Fiber Optic Adapter . . . . . . . . . . . . . . V8-T5-63
5 Compatible Connector Cables . . . . . . . . . . V8-T5-65
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . V8-T5-66
5 Technical Data and Specifications . . . . . . . . . . V8-T5-66
Excess Gain . . . . . . . . . . . . . . . . . . . . . . . .
5 Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Comet Series Sensors
5 Product Description on two-wire models for easy ● Visible sensing beams let Standards and Certifications
retrofit. Each sensor features you see where the beam is
The Comet Series from a Light/Dark Operation switch aimed for quick setup and ● UL Recognized
and a gain control to provide alignment ● cUL Recognized
5 Eaton’s electrical sector is a for quick adjustment to peak ● CE (except two-wire
complete line of high optical performance. ● Solid polyurethane housing
completely encapsulates DC models)
5 performance, 18 mm tubular The unique threaded body internal circuits for high
sensors with a variety of with flat sides allows quick resistance to shock and DANGER
mounting in a 3/4 inch hole or vibration
5 models and modes to solve against any flat surface. THIS SENSOR IS NOT A
virtually any sensing problem. Internal components are ● Adaptable modulation SAFETY DEVICE AND IS NOT
rigidly sealed in a solid circuit provides immunity INTENDED TO BE USED AS A
5 The sensors are available in encapsulated package for to crosstalk from other SAFETY DEVICE. This sensor
thru-beam, reflex, polarized excellent performance in closely mounted sensors is designed only to detect
high-vibration and high-shock and read certain data in an
5 reflex, diffuse reflective, applications. ● The industry’s only electronic manner and
focused diffuse reflective, background rejection perform no use apart from
Features sensors with a two-wire that, specifically no safety-
5 wide angle diffuse reflective, circuit design related use. This sensor
Perfect Prox®, fine spot ● Industry standard 18 mm product does not include
Perfect Prox and fiber optic diameter threaded body ● Models available with both self-checking redundant
has flat sides allowing it to AC and DC operation in a circuitry, and the failure of
5 sensing. Perfect Prox is one be mounted like a tubular single unit—up to 264 Vac this sensor product could
of the most powerful sensor or against any flat cause either an energized
surface ● Four-wire DC sensors offer or de-energized output
5 problem-solving sensors both NPN and PNP outputs condition, which could result
available. These sensors can ● Right Angle viewing in death, serious bodily
models mount in a depth ● Output status indicator injury, or property damage.
5 reliably detect targets of of only 6/10th of an inch visible from a wide 270°
different color, reflectance, angle
● Perfect Prox® technology
5 contrast or surface shape at provides exceptional
the same range, while background rejection and
ignoring background objects application problem-solving

5 just a fraction of an inch away. For Customer Service in the U.S. call 1-877-ETN CARE (386-2273),
5 The Comet Series includes in Canada call 1-800-268-3578.

AC/DC and DC-only models For Application Assistance in the U.S. and Canada
with two-, three- and four- call 1-800-426-9184.

5 wire circuitry. Choose from
cable or micro-connector.

5 Mini-connectors are available

5

5

5

For the most current information

5 on this product, visit our Web site:
www.eaton.com

V8-T5-54 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Product Overview Sensing Modes Perfect Prox Mounting 5
Comet Series sensors feature 5
Product Comparison Thru-Beam This is a unique type of a threaded housing and 5
Eaton’s cost-effective Prism diffuse reflective sensor that include two jam nuts and 5
Series, OEM Prism and This sensing mode is combines extremely high washers for mounting into any 5
premium Comet Series all available with ranges of sensing power (called “excess 0.75 in (19 mm) hole or a 5
share the same 18 mm flat- 20 and 80 ft (6 and 24m). gain”) with a sharp optical selection of accessory 5
sided housing. This results in The 20 ft (6m) range is cutoff to ignore backgrounds. mounting brackets available 5
the largest interchangeable available in forward and This allows the sensor to from Eaton. The flat sides of 5
sensor family available, Right Angle viewing, and reliably detect targets the sensor feature two 5
allowing you to select from can be intermixed in any regardless of variations in mounting holes for easily 5
well over 250 different combination for the best fit in color, reflectance, contrast or attaching the sensor to any 5
models to solve the widest your application. Long range surface shape, while ignoring flat surface with #4 hardware. 5
variety of sensing models feature a visible objects that are just slightly Mounting Sensor using 5
applications. sensing beam to help simplify outside the target range. This #4 Hardware 5
installation and alignment. gives the Perfect Prox an 5
Comparison outstanding ability to solve Mounting Sensor using 5
Reflex and Polarized Reflex sensing applications that a Jam Nut 5
Compared to similar-looking would be difficult or 5
Prism and OEM Prism, the In reflex sensing, the sensing impossible to manage with Note: See Pages V8-T5-62 and 5
Comet Series includes the beam is reflected from a other types of sensors. It also V8-T5-63, and Tab 8, section 8.2 5
following advantages: retroreflector back to the makes Perfect Prox® one of for a full list of mounting brackets 5
● AC/DC two-wire versions sensor. The Comet Series the easiest photoelectric compatible with the Comet 5
includes standard and sensors to set up and use. Series. 5
available polarized models with two- 5
● Light/dark output wire, three-wire and four-wire Eaton’s Comet Series includes 5
circuits. Right Angle models more background rejection 5
configuration are also available. Polarized models than any other family 5
● Perfect Prox® background models feature a polarizing on the market. Choose from 5
filter built into the sensor to forward or Right Angle 5
rejection technology ensure that only light viewing, two-, three- or four-
reflected from a corner-cube wire circuits, cable, micro or
retroreflector is recognized by mini-connector terminations
the sensor. This allows and a variety of sensing ranges.
reliable detection of shiny A visible sensing beam on
targets that could reflect light most models lets you quickly
and be missed by a non- confirm that the sensor is
polarized sensor. Most aligned correctly with the
models include a visible target. Fine spot models
sensing beam for easy provide an extremely small
installation and alignment. 0.05 in (1.3 mm) light spot for
accurately detecting tiny
Diffuse Reflective, targets such as fine strands of
Focused Diffuse and wire or targets that are in or
Wide Angle Diffuse behind small diameter holes.

A wide variety of diffuse Fiber Optic
reflective models are
available with ranges of 8 in The Comet Series also
(200 mm) and 24 in (610 includes sensors that utilize
mm). Forward and Right fiber optic cables to sense
Angle viewing configurations objects where space is
offer identical optical restricted, temperatures are
performance in this series. high, or tight viewing angles
Focused diffuse reflective are required. Choose from
models feature a light beam models that accept low cost
that is focused at a point 1.6 plastic fiber optic cables, or
in (40 mm) in front of the use our glass fiber optic
sensor lens for applications adapter that inexpensively
where you need to avoid converts our standard diffuse
sensing objects in front of or reflective sensors for use
behind the target. Wide angle with durable glass fiber optic
diffuse models provide a cables.
large spot and wide detection
area.

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-55

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Product Selection

5 Thru-Beam Sensors

Three-Wire and Four-Wire Sensors
5 Operating
Sensing Optimum Thru-Beam
Component
Voltage Range Range Field of View Connection Type Catalog Number

5 Thru-Beam Forward Thru-Beam Forward Viewing 12 30 in (760 mm)
Viewing diameter at
20–264 Vac 20 ft (6m) 0.1 to 10 ft 10 ft (3m) 3 Source 6 ft cable 11100A6513
5 Source 50/60 Hz or (0.03 to 3m) (Visible alignment beam) 4-pin micro AC connector 11100AQD03
40 in (1m) Detector 6 ft cable 12100A6513
15–30 Vdc (NPN) diameter at 4-pin micro AC connector 12100AQD03
40 ft (12m) Source 6 ft cable 11102A6513
5 (Visible red beam) 4-pin micro AC connector 11102AQD03
30 in (760 mm) Detector 6 ft cable 12102A6513
5 Detector 80 ft (24m) 0.1 to 40 ft diameter at 4-pin micro AC connector 12102AQD03
5 (0.03 to 12m) 10 ft (3m) 3 Source 6 ft cable 11100A6517
(Visible alignment beam) 4-pin micro DC connector 11100AQD07
5 10–30 Vdc 20 ft (6m) 0.1 to 10 ft 40 in (1m) Detector 6 ft cable 12100A6517
diameter at 4-pin micro DC connector 12100AQD07
5 (NPN and PNP) (0.03 to 3m) 40 ft (12m) Source 6 ft cable 11102A6517
(Visible red beam) 4-pin micro DC connector 11102AQD07
5 30 in (760 mm) Detector 6 ft cable 12102A6517
diameter at 4-pin micro DC connector 12102AQD07
5 80 ft (24m) 0.1 to 40 ft 10 ft (3m) 3
(0.03 to 12m)
30 in (760 mm)
5 diameter at
10 ft (3m) 3
5 Thru-Beam Right Thru-Beam Right Angle Viewing12
Angle Viewing
20–264 Vac 20 ft (6m) 0.1 to 10 ft Source 6 ft cable 11100R6513
5 Source 50/60 Hz or (0.03 to 3m) (Visible alignment beam) 4-pin micro AC connector 11100RQD03
15–30 Vdc (NPN) 6 ft cable 12100R6513
5 Detector 4-pin micro AC connector 12100RQD03
6 ft cable 11100R6517
5 10–30 Vdc 20 ft (6m) 0.1 to 10 ft Source 4-pin micro DC connector 11100RQD07
(Visible alignment beam) 6 ft cable 12100R6517
(NPN and PNP) (0.03 to 3m) 4-pin micro DC connector 12100RQD07
Detector
5 Detector

5

5 Notes
See listing of compatible connector cables on Page V8-T5-62.

5 1 For a complete system, order one source and one detector.
2 11100 sources and 12100 detectors may be interchanged in any combination. 11102 models must be used with 12102 models.

5 3 The effective beam (minimum object size that can be detected) is 0.25 in (6.5 mm) diameter.

5

5

5

5

5

5

5

5

V8-T5-56 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Reflex Sensors Two-Wire Sensors 5
5
Standard Reflex Operating Sensing Optimum Field of View Sensing Beam Connection Type Catalog Number 5
Forward Viewing Voltage Range 1 Range 2 Visible red beam 5
1 in (25 mm) 5
Sensor Standard Reflex Forward Viewing diameter at Visible red beam 5
Retroreflector 3 50 in (1.3m) 5
Polarized Reflex 90–132 Vac 25 ft (7.6m) 0.1 to 15 ft 6 ft cable 14102AS6515 5
Forward Viewing 50/60 Hz or (0.03 to 4.5m) 1 in (25 mm) 5
18–50 Vdc diameter at 5
Sensor 50 in (1.3m) 5
Retroreflector 3 3-pin micro AC connector 14102ASQD05 5
5
Polarized Reflex Forward Viewing 4 5
5
90–132 Vac 15 ft (4.5m) 0.1 to 10 ft 6 ft cable 14101AS6515 5
50/60 Hz or (0.03 to 3m) 5
18–50 Vdc 5
5
3-pin micro AC connector 14101ASQD05 5
5
Three-Wire and Four-Wire Sensors 5
5
Operating Sensing Optimum Field of View Sensing Beam Connection Type Catalog Number 5
Voltage Range 1 Range 2 Visible red beam 5
1 in (25 mm) Infrared beam 5
Standard Reflex Standard Reflex Forward Viewing 5 diameter at Visible red beam 5
Forward Viewing 50 in (1.3m) Infrared beam 5
20–264 Vac 25 ft (7.6m) 0.1 to 15 ft 6 ft cable 14102A6513 5
Sensor 50/60 Hz or (0.03 to 4.5m) 1 in (25 mm) 4-pin micro AC connector 14102AQD03 5
Retroreflector 3 15–30 Vdc (NPN) diameter at 6 ft cable 14100A6513
50 in (1.3m) 4-pin micro AC connector 14100AQD03
10–30 Vdc 25 ft (7.6m) 0.1 to 15 ft 6 ft cable 14102A6517
(NPN and PNP) (0.03 to 4.5m) 4-pin micro DC connector 14102AQD07
6 ft cable 14100A6517
4-pin micro DC connector 14100AQD07

Standard Reflex Right Standard Reflex Right Angle Viewing 5
Angle Viewing
20–264 Vac 15 ft (4.5m) 0.1 to 10 ft 1 in (25 mm) Visible red beam 6 ft cable 14102R6513
Sensor 50/60 Hz or (0.03 to 3m) diameter at Visible red beam 4-pin micro AC connector 14102RQD03
Retroreflector 3 15–30 Vdc (NPN) 50 in (1.3m) 6 ft cable 14102R6517
4-pin micro DC connector 14102RQD07
10–30 Vdc 15 ft (4.5m) 0.1 to 10 ft 1 in (25 mm)
(NPN and PNP) (0.03 to 3m) diameter at
50 in (1.3m)

Polarized Reflex Polarized Reflex Forward Viewing 45
Forward Viewing
20–264 Vac 15 ft (4.5m) 0.1 to 10 ft 1 in (25 mm) Visible red beam 6 ft cable 14101A6513
Sensor 50/60 Hz or (0.03 to 3m) diameter at Visible red beam 4-pin micro AC connector 14101AQD03
Retroreflector 3 15–30 Vdc (NPN) 50 in (1.3m)
6 ft cable 14101A6517
10–30 Vdc 15 ft (4.5m) 0.1 to 10 ft 1 in (25 mm) 4-pin micro DC connector 14101AQD07
(NPN and PNP) (0.03 to 3m) diameter at
50 in (1.3m)

Polarized Reflex Right Polarized Reflex Right Angle Viewing 245
Angle Viewing
20–264 Vac 10 ft (3m) 0.1 to 5 ft 1 in (25 mm) Visible red beam 6 ft cable 14101R6513
50/60 Hz or (0.03 to 1.5m) diameter at 4-pin micro AC connector 14101RQD03
15–30 Vdc (NPN) 50 in (1.3m)
6 ft cable 14101R6517
Sensor 10–30 Vdc 10 ft (3m) 0.1 to 5 ft 1 in (25 mm) Visible red beam 4-pin micro DC connector 14101RQD07
(0.03 to 1.5m) diameter at
50 in (1.3m)
Retroreflector 3

Notes

See listing of compatible connector cables on Page V8-T5-62.

1 Ranges based on a 3 in diameter retroreflector.
2 Right Angle viewing polarized reflex models are rated NEMA 1 only.

See Prism Series in section 5.6 for a Right Angle viewing polarized reflex sensor rated NEMA 4X and 6.
3 Retroreflector is not included.
4 Polarized reflex sensors may not operate with retroreflective tape. Test selected tape prior to installation.
5 For complete system, order sensor and retroreflector, see Tab 8, section 8.1.

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-57

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Diffuse Reflective and Focused Diffuse Reflective Sensors

5 Three-Wire and Four-Wire Sensors
Operating Sensing Optimum

5 Diffuse Reflective Voltage Range 1 Range Field of View Sensing Beam Connection Type Catalog Number

Diffuse Reflective Forward Viewing

Forward Viewing 20–264 Vac 8 in (200 mm) 0.1 to 5 in 2 in (50 mm) diameter Infrared beam 6 ft cable 13106A6513
50/60 Hz or 24 in (610 mm) (3 to 127 mm) at 5 in (127 mm) Infrared beam 4-pin micro AC connector 13106AQD03
5 15–30 Vdc (NPN) 8 in (200 mm) Infrared beam 6 ft cable 13100A6513
5 0.1 to 15 in 5 in (127 mm) diameter 4-pin micro AC connector 13100AQD03
5 10–30 Vdc (3 to 380 mm) at 15 in (380 mm) 6 ft cable 13106A6517

0.1 to 5 in 2 in (50 mm) diameter

5 (NPN and PNP) 24 in (610 mm) (3 to 127 mm) at 5 in (127 mm) Infrared beam 4-pin micro DC connector 13106AQD07
0.1 to 15 in 5 in (127 mm) diameter 6 ft cable 13100A6517

5 (3 to 380 mm) at 15 in (380 mm) 4-pin micro DC connector 13100AQD07

Diffuse Reflective Diffuse Reflective Right Angle Viewing

5 Right Angle Viewing 8 in (200 mm) 0.1 to 5 in 2 in (50 mm) diameter Infrared beam 6 ft cable 13106R6513
20–264 Vac
5 50/60 Hz or (3 to 127 mm) at 5 in (127 mm)
15–30 Vdc (NPN) 24 in (610 mm) 0.1 to 15 in 5 in (127 mm) diameter Infrared beam 4-pin micro AC connector 13106RQD03
6 ft cable 13100R6513

5 (3 to 380 mm) at 15 in (380 mm) 4-pin micro AC connector 13100RQD03

10–30 Vdc 8 in (200 mm) 0.1 to 5 in 2 in (50 mm) diameter Infrared beam 6 ft cable 13106R6517

5 (NPN and PNP) (3 to 127 mm) at 5 in (127 mm) 4-pin micro DC connector 13106RQD07

24 in (610 mm) 0.1 to 15 in 5 in (127 mm) diameter Infrared beam 6 ft cable 13100R6517

5 (3 to 380 mm) at 15 in (380 mm) 4-pin micro DC connector 13100RQD07

5 Wide Beam Diffuse Wide Beam Diffuse Reflective Forward Viewing
Reflective Forward
Viewing 20–264 Vac 6 in (150 mm) 0.1 to 4 in 4.3 in (109 mm) diameter Infrared beam 6 ft cable 13107AS6513
4-pin micro AC connector 13107ASQD03
50/60 Hz or (3 to 101 mm) at 3 in (76 mm)
5 15–30 Vdc (NPN)

10–30 Vdc 6 in (150 mm) 0.1 to 4 in 4.3 in (109 mm) diameter Infrared beam 6 ft cable 13107AS6517
5 (NPN and PNP)
(3 to 101 mm) at 3 in (76 mm) 4-pin micro DC connector 13107ASQD07

5 Wide Beam Diffuse Wide Beam Diffuse Reflective Right Angle Viewing
Reflective Right Angle
Viewing 20–264 Vac 6 in (150 mm) 0.1 to 4 in 4.3 in (109 mm) diameter Infrared beam 6 ft cable 13107RS6513
4-pin micro AC connector 13107RSQD03
5 50/60 Hz or (3 to 101 mm) at 3 in (76 mm)
15–30 Vdc
(NPN)

5 10–30 Vdc 6 in (150 mm) 0.1 to 4 in 4.3 in (109 mm) diameter Infrared beam 6 ft cable 13107RS6517

(NPN and PNP) (3 to 101 mm) at 3 in (76 mm) 4-pin micro DC connector 13107RSQD07

5 Focused Diffuse Focused Diffuse Reflective Forward Viewing
Reflective Forward
20–264 Vac Focused at 1.5 to 1.9 in 0.05 in (1.3 mm) diameter Visible red beam 6 ft cable 13102A6513
5 Viewing 50/60 Hz or 1.6 in (40 mm) (38 to 48 mm) at 1.6 in (40 mm) 4-pin micro AC connector 13102AQD03
15–30 Vdc (NPN)

5 10–30 Vdc Focused at 1.5 to 1.9 in 0.05 in (1.3 mm) diameter Visible red beam 6 ft cable 13102A6517

5 (NPN and PNP) 1.6 in (40 mm) (38 to 48 mm) at 1.6 in (40 mm) 4-pin micro DC connector 13102AQD07

Notes

5 See listing of compatible connector cables on Page V8-T5-62.
1 Sensor will detect a 90% reflective white card at this range.

5

5

5

5

5

5

V8-T5-58 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Perfect Prox Background Rejection Sensors 5
5
Two-Wire Sensors 5
5
Operating Nominal Optimum Cut-Off Filed of View Sensing Beam Connection Type Catalog Number 5
Voltage Range 1 Range Range 2 5
5
Perfect Prox Perfect Prox Forward Viewing 5
Forward Viewing 5
90–132 Vac 2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) 0.25 in (6 mm) Visible red 6 ft cable 13104A6515 5
50/60 Hz or sharp cutoff (10 to 45 mm) 3-pin micro AC connector 13104AQD05 5
18–50 Vdc and beyond diameter at 3-pin mini-connector 13104AQD25 5
6 ft cable 13101AS6515 3 5
2.25 in (64 mm) 3-pin micro AC connector 13101ASQD05 3 5
3-pin mini- connector 13101ASQD25 3 5
4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 0.35 in (9 mm) 5
sharp cutoff (13 to 76 mm) and beyond diameter at 5
5 in (127 mm) 5
5
Perfect Prox Perfect Prox Right Angle Viewing 5
Right Angle Viewing 5
90–132 Vac 2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) 0.25 in (6 mm) Visible red 6 ft cable 13104R6515 5
50/60 Hz or sharp cutoff (10 to 45 mm) 3-pin micro AC connector 13104RQD05 5
18–50 Vdc and beyond diameter at 3-pin mini-connector 13104RQD25 5
6 ft cable 13101RS6515 3 5
2.25 in (64 mm) 3-pin micro AC connector 13101RSQD05 3 5
5
4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 0.35 in (9 mm) 5
sharp cutoff (13 to 76 mm) and beyond diameter at 5
5 in (127 mm) 5

Three-Wire and Four-Wire Sensors

Operating Nominal Optimum Cut-Off Filed of View Sensing Beam Connection Type Catalog Number
Voltage Range 1 Range Range 2
0.25 in (6 mm)
Perfect Prox Perfect Prox Forward Viewing diameter at
Forward Viewing 2.25 in (64 mm)
20–264 Vac 2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) Visible red 6 ft cable 13104A6513
50/60 Hz or sharp cutoff (10 to 45 mm) and beyond 0.35 in (9 mm) Infrared 4-pin micro AC connector 13104AQD03
15–30 Vdc diameter at Visible red
(NPN) 4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 5 in (127 mm) Infrared 6 ft cable 13101A6513
sharp cutoff (13 to 76 mm) and beyond 4-pin micro AC connector 13101AQD03
0.6 in (15 mm)
6 in (150 mm) 0.1 to 4 in 9 in (228 mm) diameter at 6 ft cable 13108A6513
6 in (150 mm) 4-pin micro AC connector 13108AQD03
standard cutoff (3 to 100 mm) and beyond
0.9 in (23 mm) 6 ft cable 13103A6513
9 in (225 mm) 0.1 to 6 in 12 in (304 mm) diameter at 4-pin micro AC connector 13103AQD03
standard cutoff (3 to 150 mm) and beyond 9 in (225 mm)
6 ft cable 13104A6517
10–30 Vdc 2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) 0.25 in (6 mm) 4-pin micro DC connector 13104AQD07
(NPN and PNP) sharp cutoff (10 to 45 mm) and beyond diameter at
2.25 in (64 mm) 6 ft cable 13101A6517
4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 4-pin micro DC connector 13101AQD07
sharp cutoff (13 to 76 mm) and beyond 0.35 in (9 mm)
diameter at 6 ft cable 13108A6517
6 in (150 mm) 0.1 to 4 in 9 in (228 mm) 5 in (127 mm) 4-pin micro DC connector 13108AQD07
standard cutoff (3 to 100 mm) and beyond
0.6 in (15 mm) 6 ft cable 13103A6517
9 in (225 mm) 0.1 to 6 in 12 in (304 mm) diameter at 4-pin micro DC connector 13103AQD07
6 in (150 mm)
standard cutoff (3 to 150 mm) and beyond
0.9 in (23 mm)
diameter at
9 in (225 mm)

Notes

See listing of compatible connector cables on Page V8-T5-62.

1 Sensor will detect a 90% reflectance card at this range.
2 Sensor will ignore a 90% reflectance card at this range.
3 Consult factory for approval status.

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-59

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Three-Wire and Four-Wire Sensors, continued
Operating Nominal Optimum Cut-Off

5 Voltage Range 1 Range Range 2 Filed of View Sensing Beam Connection Type Catalog Number
Perfect Prox
Perfect Prox Right Angle Viewing

5 Right Angle Viewing 20–264 Vac 2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) 0.25 in (6 mm) Visible red 6 ft cable 13104R6513
50/60 Hz or sharp cutoff 4-pin micro AC connector 13104RQD03
(10 to 45 mm) and beyond diameter at
6 ft cable 13104RS5013
5 15–30 Vdc 4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 2.25 in (64 mm)
(NPN) 0.35 in (9 mm)

5 sharp cutoff (13 to 76 mm) and beyond diameter at 4-pin micro AC connector 13104RS5003
5 in (127 mm)

6 in (150 mm) 0.1 to 4 in 9 in (228 mm) 0.6 in (15 mm) Infrared 6 ft cable 13108R6513

5 standard cutoff (3 to 100 mm) and beyond diameter at 4-pin micro AC connector 13108RQD03
6 in (150 mm)

5 9 in (225 mm) 0.1 to 6 in 12 in (304 mm) 0.9 in (23 mm) 6 ft cable 13103R6513
standard cutoff (3 to 150 mm) and beyond diameter at 4-pin micro AC connector 13103RQD03
9 in (225 mm)
5 10–30 Vdc
2 in (50 mm) 0.4 to 1.8 in 2.25 in (57 mm) 0.25 in (6 mm) Visible red 6 ft cable 13104R6517

5 (NPN and PNP) sharp cutoff (10 to 45 mm) and beyond diameter at 4-pin micro DC connector 13104RQD07
2.25 in (64 mm)

4 in (100 mm) 0.5 to 3 in 5 in (127 mm) 0.35 in (9 mm) 6 ft cable 13104RS5020

5 sharp cutoff (13 to 76 mm) and beyond diameter at 4-pin micro DC connector 13104RS5007
5 in (127 mm)

5 6 in (150 mm) 0.1 to 4 in 9 in (228 mm) 0.6 in (15 mm) Infrared 6 ft cable 13108R6517
5 standard cutoff (3 to 100 mm) and beyond diameter at Visible red 4-pin micro DC connector 13108RQD07
5 6 in (150 mm)
9 in (225 mm) 0.1 to 6 in 12 in (304 mm) 6 ft cable 13103R6517
Fine Spot standard cutoff (3 to 150 mm) and beyond 0.9 in (23 mm) 4-pin micro DC connector 13103RQD07
diameter at
5 Perfect Prox Fine Spot Perfect Prox Forward Viewing 2.25 in (57 mm) 9 in (225 mm)
Forward Viewing and beyond
20–264 Vac 2 in (50 mm) 0.9 to 1.8 in 0.05 in (1.3 mm) 6 ft cable 13105A6513
5 50/60 Hz or sharp cutoff (23 to 45 mm) diameter at 4-pin micro AC connector 13105AQD03
15–30 Vdc 1.7 in (43 mm)
(NPN)

5 10–30 Vdc 2 in (50 mm) 0.9 to 1.8 in 2.25 in (57 mm) 0.05 in (1.3 mm) 6 ft cable 13105A6517
(NPN and PNP) sharp cutoff (23 to 45 mm) 4-pin micro DC connector 13105AQD07
and beyond diameter at

1.7 in (43 mm)

5 Notes

5 See listing of compatible connector cables on Page V8-T5-62.
1 Sensor will detect a 90% reflectance card at this range.
2 Sensor will ignore a 90% reflectance card at this range.

5 3 Consult factory for approval status.

5

5

5

5

5

5

5

5

5

5

5

V8-T5-60 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Fiber Optic Sensors 5
5
Three-Wire and Four-Wire Sensors 5
5
Sensing Range (Optimum Range is 50% of Sensing Range) 1 5
5
Pre-Assembled Fiber Optic Cables 5
5
Bulk Length Fibers 2 Thru-Beam Mode Diffuse Reflective Mode 5
5
Operating Thru-Beam Diffuse 0.5 mm 1 mm 0.5 mm 1 mm Connection Type Catalog Number 5
Voltage Mode Reflective Diameter Diameter Diameter Diameter 5
Mode Fibers Fibers Fibers Fibers 6 ft cable 15100A6513 5
4-pin micro AC connector 15100AQD03 5
Plastic Fiber Optic 18 mm Diameter Plastic Fiber Optic Forward Viewing 6 ft cable 15100A6517 5
Forward Viewing 4-pin micro DC connector 15100AQD07 5
20–264 Vac 5 in (123 mm) 1.5 in 2.1 in 5 in 0.6 in 1.5 in 5
50/60 Hz or (38 mm) (53 mm) (127 mm) (15 mm) (38 mm) 5
15–30 Vdc 5
(NPN) 5
5
10–30 Vdc 5 in (123 mm) 1.5 in 2.1 in 5 in 0.6 in 1.5 in 5
(53 mm) (127 mm) (15 mm) (38 mm) 5
(NPN and PNP) (38 mm) 5
5
Glass Fiber Optic Adapter 5
Use our glass fiber optic adapter with any diffuse reflective sensor model—see below for details. 5
5
Glass Fiber Optic Adapter 5
This simple adapter allows glass fiber optic cables to be used with standard Comet Series diffuse reflective sensors. 5

Glass Fiber Optic Glass Fiber Optic Adapter
Adapter with
Hex Wrench, Sensors Fibers Catalog Number
6235A-6501
Glass Fiber Optic Adapter with Hex Wrench

Forward viewing, diffuse reflective sensors Glass fiber optic cables
(ordered separately, see Page V8-T5-58) (ordered separately, see Tab 9, section 9.2)

Note: Use only with the E51KF series fibers.

Notes

See listing of compatible connector cables on Page V8-T5-62.

1 Ranges are with bare fibers—no lenses. Sensing range is affected by power of sensor, length of fiber optic cable and use of lenses.
Lenses will increase ranges. As bulk fiber length increases, sensing range decreases—see table below. For example, for 100 ft of fiber
(the total of source and detector fiber lengths), the excess gain shown in gain graphs below would be reduced to about 1/4 its nominal value.

1/200 TOTAL FIBER LENGTH (m)
6.1 12.2 18.3 24.4 30.5 36.6 42.7 48.8 54.9 61

EXCESS GAIN 1/10
LOSS FACTOR 1/8
1/6

1/4
1/3

1/2

1
0 20 40 60 80 100 120 140 160 180 200
TOTAL FIBER LENGTH (feet)

2 Sensing range is based on 6 ft (2m) of plastic 1 mm diameter source and detector fiber optic cable for a total length of 13.1 ft (4m).
To determine performance with longer lengths, see graph above.
Compatible fiber optic cables are shown in Tab 9, section 9.1.

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-61

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Compatible Connector Cables

5 Micro-Style, Standard Cables—Micro 1
Straight Female
Pin Configuration/

5 Voltage Number Wire Colors PVC Jacket PUR Jacket IRR PUR Jacket
Style of Pins
Gauge Length (Face View Female Shown) Catalog Number Catalog Number Catalog Number
6 ft (2m)
5 Micro-Style, Straight Female CSAS3F3CY2202 CSAS3F3RY2202 —
AC 3-pin, 22 AWG
1-Green
3-wire 2-Red/Black
3-Red/White
5

5 4-pin, 22 AWG 6 ft (2m) 1-Red/Black CSAS4F4CY2202 CSAS4F4RY2202 CSAS4F4IO2202
4-wire 2-Red/White

3-Red

5 4-Green
DC 4-pin, 22 AWG 6 ft (2m) CSDS4A4CY2202 CSDS4A4RY2202 CSDS4A4IO2202
1-Brown

5 4-wire 2-White
3-Blue

4-Black

5

5 Mini-Style, Standard Cables—Mini 1

Straight Female Current Voltage Number Length Pin Configuration/
Rating Style of Pins Gauge 6 ft (2m) Wire Colors
5 at 600V (Face View Female Shown) Catalog Number

5 Mini-Style, Straight Female

5 13A — 3-pin 16 AWG 1-Green CSMS3F3CY1602
2-Black
5 3-White

5 Accessories

5 Comet Series Sensors Catalog Number
Description

5 Retroreflectors See Tab 8, section 8.1

Retroreflectors and retroreflective tape

5 Mounting Brackets

5 Flush Mount Bracket A wide variety of mounting brackets for tubular sensors See Tab 8, section 8.2
Flush Mount Bracket

5 Contoured design is ideal for flush mounting of Right Angle Comet Series reflex to mounting 6161AS5296
surface using 1/4-in hardware. No alignment adjustment. Sensor mounts on #4 studs.
304 stainless steel

5

5

5 Flush Mount Bracket Flush Mount Bracket 6161AS5297
Same as above except without contour. Ideal for right angle diffuse and thru-beam sensors.

304 stainless steel

5

5 Dimensions, see Page V8-T5-68.
5 Note

1 For a full selection of connector cables, see Tab 10, section 10.1.

5

5

5

5

V8-T5-62 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Adjustable Protective Comet Series Sensors, continued Catalog Number 5
Bracket E58KS5200 5
Description 5
5
Adjustable Protective Bracket 5
5
Heavy-duty bracket protects the sensor from damage. Works with all Comet Series sensors 5
except two inch Perfect Prox models. Ideal for material handling applications with Right 5
Angle reflex sensors. Provides locking vertical and horizontal adjustments for independent 5
adjustment in each axis. Sensor mounts on #4 studs. 10 ga. painted steel 5
5
Comet Ball Swivel Comet Ball Swivel Bracket 6181AS5200 5
Bracket Allows 360° rotation and 10° vertical tilt. Hole spacing is identical to our 50 and 55 Series 5
sensors. Ideal for mounting Right Angle sensors. Made of Noryl®. 5
5
Accessories See Tab 8, sections 8.2 5
Replacement mounting brackets, nuts and other accessories and 8.3 5
5
Connector Cables See Tab 10, section 10.1 5
A variety of cables, connector blocks and accessories 5
Dimensions, see Page V8-T5-68. 5
5
Technical Data and Specifications 5
5
Glass Fiber Optic Adapter Specification 5
5
Description See Comet Series specifications on Page V8-T5-64 5
Sensor specifications Adapter: 360 brass; gasket: silicone 5
Material of construction 30g over 10 Hz to 2 kHz 5
Vibration (sensor/adapter) 50g for 10 ms 1/2 sinewave pulse 5
Shock (sensor/adapter) NEMA 1 1
Enclosure ratings

Note

1 The adapter will resist the entrance of moisture in the area between the lenses and the fiber ends
when properly assembled. However, moisture entry is possible during direct high pressure sprays.
Since the Comet Series sensors are rated NEMA 1, 2, 3, 4, 4X, 6, 12 and 13, this will not result in
damage to the sensors themselves.

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-63

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Comet Series Sensors
Three-Wire and Four-Wire Sensors

5 Description AC/DC Models AC/DC Models DC-Only Models Two-Wire Sensors DC Models
(AC Operation) (DC Operation) AC Models

5 Input voltage 20 to 264 Vac, 50/60 Hz 15 to 30 Vdc 10 to 30 Vdc, 90 to 132 Vac, 50/60 Hz 18 to 50 Vdc
5 Power dissipation 1.5W maximum (15 to 24 Vdc above (10 to 24 Vdc above 2W maximum 2W maximum
131°F/55°C) 131°F/55°C)

1.5W maximum 1W maximum

5 Output type VMOS (bi-directional) NPN (sink) NPN and PNP (dual outputs) DMOS DMOS
Current switching 300 mA maximum 300 mA maximum 300 mA 300 mA
PNP: 100 mA maximum;
5 NPN: 250 mA maximum
(NPN: 120 mA maximum above
131°F/55°C)

5 Voltage switching 375V peak maximum 375V peak maximum 30 Vdc maximum 132 Vac maximum 50 Vdc maximum

Off-state leakage 250 μA typical; 250 μA typical; 10 μA maximum 1.7 mA maximum 1.5 mA maximum
500μA maximum 500 μA maximum 1A maximum 1A maximum
5 2A maximum 1A maximum 10 Vac 8 Vdc
Surge current 2A maximum 1.8V at 10 mA; 3.5V at 300 mA NPN: 400 mV at 10 mA,
1.5V at 250 mA; 32 ms 32 ms
5 On-state voltage drop — 10 ms PNP: 2.4V at 100 mA
1 ms; 3.5 ms (thru-beam)
5 10 ms
Response time

5 Time delay Models with fixed time delay Models with fixed time delay Models with fixed time delay Models with fixed time delay Models with fixed time delay
available—contact factory available—contact factory available—contact factory available—contact factory available—contact factory

5 Short circuit protection 1 1 2 Auto reset Auto reset

Temperature range

5 Thru-beam source –4° to 158°F (–20° to 70°C) –4° to 158°F (–20° to 70°C) –4° to 158°F (–20° to 70°C) –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C)

All others –40° to 158°F (–40° to 70°C) –40° to 158°F (–40° to 70°C) –40° to 158°F (–40° to 70°C) — —
5 Light/dark operation Switch selectable Switch selectable
Switch selectable Switch selectable Switch selectable

5 Description All Models

Enclosure material Lens: polycarbonate; cable jacket: PVC; body: structural polyurethane foam (do not expose to concentrated acids, alcohols or ketones)
Cable versions: 6 ft cable (22 AWG)
5 Cable/connector

Connector versions: Male mini- and micro-connectors (refer to wiring diagrams for number of pins per model) on nominal 8 in pigtails

5 Vibration and shock Vibration: 30g over 10 Hz to 2 kHz; shock: 100g for 3 ms 1/2 sine wave pulse

5 Indicator LED Lights steady when output is ON; flashes when short circuit protection is in latch condition (except two-wire models)
Sunlight immunity Perfect Prox: 5000 ft-candles; all others: 10,000 ft-candles

5 Enclosure ratings NEMA 1, 2, 3, 4, 4X, 6, 12 and 13 34; IP69K

Notes

5 1 Sensor will turn off immediately when short or overload is detected (indicator LED flashes). Turn power OFF and back ON to reset.
IMPORTANT: During installation, correct power connections must be made first to ensure fail-safe short circuit protection of outputs.

5 2 Sensor will turn off immediately when short or overload is detected (indicator LED flashes). Sensor will reset when short is removed.
3 These products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications.

5 4 NEMA 6P models available—contact factory.

5

5

5

5

5

5

5

5

V8-T5-64 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Excess Gain Reflex Sensors, Diffuse Reflective Sensors and Focused Diffuse Reflective Sensors 5
Thru-Beam Sensors 5
5
Thru-Beam Reflex (3 In Diameter Diffuse Reflective Focused Diffuse Reflective 5
Retroreflector) (90% Reflective White Card) 5
5
0.03 RANGE (m) 30.5 0.03 RANGE (m) 30.5 2.5 RANGE (mm) 2540 2.5 RANGE (mm) 2540 5
1000 1000 1000 1000 5
0.3 3.0 0.3 3.0 25 254 25 254 5
5
EXCESS GAIN 1 5 100 5
EXCESS GAIN 5
EXCESS GAIN100100 5
EXCESS GAIN 5
100 2 6 5
5
12 3 10 10 5
5
10 10 5
5
4 7 5
8 5
5
1 1 9 5
5
11 5
5
0.1 1 10 100 0.1 1 10 100 0.1 1 10 100 0.1 1 10 100 5
5
RANGE (feet) RANGE (feet) RANGE (inches) RANGE (inches) 5

1. 12100A and 12100R detectors using 1. 14100A/14102A 5. 13107 8. 13102A Typical
11100A or 11100R sources 2. 14102R 6. 13100 9. 13102A Minimum
3. 14101A 7. 13106
2. 12102A detectors using 11102A sources 4. 14101R

Perfect Prox Sensors

2.5 RANGE (mm) 254 2.5 RANGE (mm) 254 2.5 RANGE (mm) 254
300 300 300
25 25 25

100 100 100

EXCESS GAIN 1 4

2 10 7
10 8
10 5

13 10 6 10 9 10
1 10
0.1 1 1
0.1 1 0.1 1
RANGE (inches)
RANGE (inches) RANGE (inches)
1. 13108A/13108R
2. 13104A 4. 13103A/13103R 7. 13101AS
3. 13104RS 5. 13101A Typical 8. 13104R
6. 13101A Minimum 9. 13105A Typical
10. 13105A Minimum

Fiber Optic Sensors (Performance using 13.1 ft [4m] of fiber) Glass Fiber Optic Adapters

Thru-Beam Mode Diffuse Reflective Mode When Using Single Fibers When Using Duplex
for Thru-Beam Sensing Fibers for Diffuse
Reflective Sensing

RANGE (mm) RANGE (mm) RANGE (mm) RANGE (mm)

2.5 25 254 2540 0.25 2.5 25 254 2.5 25 254 2540 0.25 2.5 25 254
1000 1000 1000 1000

1 1
2
100
100
EXCESS GAIN 100
EXCESS GAIN
EXCESSGAIN
EXCESSGAIN
10 100 1 2 10 3
2
10 4
10

1 1 1 1
100 0.01 0.1 1 10
0.1 1 10 100 0.01 0.1 1.0 10 0.1 1 10
RANGE (inches)
RANGE (inches) RANGE (inches) RANGE (inches)
Gain using E51KF723 fibers, based on 90%
1. 15100 with 1 mm diameter fibers 1. 15100 with 1 mm diameter fibers Gain using E51KF823 fibers reflective white card
2. 15100 with 0.5 mm diameter fibers 2. 15100 with 0.5 mm diameter fibers 1. 13100A Comet 3. 13100A Comet
2. 13106A Comet 4. 13106A Comet

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-65

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Wiring Diagrams DC Models (Two-Wire)
Pin numbers are for reference, rely on pin location when wiring.

5 AC/DC Models (AC Connection)

5 Cable Version Connector Version-Face View Male Cable Version Connector Version-Face View Male
L2 L2 +V
+V NPN
Output
Switched (Red/White) Load
L1 Load
5 Black* AC/DCAC 20 to 264 V
Load Blue (Red)* DC 18 to 50 V (Sink) Brown Brown
DC (-)
2 (Red/Black) 21
31 Blue Comet Blue 3 4
Switched Brown Comet
4 Load
5 L1 PNP

5 L1 No Connection (Green) Output Load
(Source)
1 ( -)
L1
1

5

5 AC Models (AC Connection) DC Models (Four-Wire)

Cable Version Connector Version-Face View Male Cable Version Connector Version-Face View Male
+V
5 L2 L2 +V

NPN NPN (Brown)
Output Load Red Output Load
Load Load DC 10 to 30 V
(Sink) (Sink)
5 BlueAC 90 to 132 V 2 Green* 2
AC DC 31
Brown Comet 31 White* Comet (White)* (Black)*
4 PNP
5 PNP Black
Output Load (Blue) Load Output
(Source) (Source)

5 L1 L1 ( -) (-)

1

5 AC/DC Models (DC Connection) Notes

5 Cable Version Connector Version-Face View Male CAUTION: AC/DC connector version sensors use an AC-type connector. Use of DC power
with AC-type connectors may not conform with established standards.
+V +V For connector versions, the pin numbering and color codes shown are typical of several
manufacturers. However, variations are possible. In case of discrepancies, rely on function
5 Load Blue NPN (Red/White) indicated and pin location rather than pin number or color code.
* No connection when using thru-beam sources.
DC 15 to 30 V Output Load
(Sink)
2
5 NPN Black* AC/DC 31 (Red/Black)
Brown Comet
Output (Red)* 4

5 (Sink) No Connection (Green)

(-) (-)

5 1

5

Dimensions

5 Approximate Dimensions in Inches (mm), unless otherwise noted

5 Sensor with Adapter Installed

5 M 18 x 1.0 Thread (mm) Gasket Adapter

Micro Connector

5 (quick-disconnect Indicator LED
versions only)*

5 0.56 Micro 0.32 1.0
(14.2) Connector (8.1) (25.4)

5 Cable 0.32
length* (8.1)
5 1.69 (42.9) 1.5 (38.1)** 0.66
* Quick-disconnect versions: 8 ± 2 (203.2 ± 50.8) 2.6 (66.0)** (16.8)

5 Cable Versions: 6 feet (2m) ** Maximum - based on 13100A Sensor

5

5

5

V8-T5-66 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

Photoelectric Sensors 5.5

Comet Series Sensors

Approximate Dimensions in Inches (mm), unless otherwise noted 5
5
Comet Series Sensor Dimensions and Specifications 5
5
0.125 (3.2) Diameter Light/Dark Gain 0.47 5
(11.9) 5
Mini or Micro Connector Thru Holes (2 places) Use Adjustment Adjustment M 18 x 1.0 5
0.11 Thread (mm) – 5
(quick-disconnect #4 Hardware Only (2.8) Body sensor fits 5
into a 0.75 (19.1) 5
versions only)* LED Type dia. hole 5
5
0.56 Micro "1" 5
(14.2) Connector 5
5
1.69 (42.9) Cable 0.32 "B" 1.00 (25.4) "C" 5
length* (8.1) "A" 5
"2" 5
*Quick-disconnect versions: 8 ± 2 (203.2 ± 50.8) 5
Cable versions: 6 feet (2m) 5
5
Catalog Number Dimensions C D Adjustments Body "3" 5
11100A AB 0.25 (6) N/A Light/ Dark Gain Type 5
11100R 0.60 (15) 0.20 (5) "4" 5
11102A 2.20 (56) 0.65 (17) 1.10 (28) N/A No No 2 5
12100A 2.55 (65) 0.65 (17) 0.25 (6) N/A No No 4 "5" 5
12100R 2.75 (70) 0.65 (17) 0.60 (15) 0.20 (5) No No 1 5
12102A 2.20 (56) 0.65 (17) 0.29 (7) N/A Yes Yes 2 "6" 5
13100A, 13106A 2.55 (65) 0.65 (17) 0.25 (6) N/A Yes Yes 4 5
13100R, 13106R 2.60 (66) 0.60 (15) 0.60 (15) 0.20 (5) Yes Yes 1 0.6 "D" 0.5 5
13101A, 13104A 2.20 (56) 0.65 (17) 0.25 (6) N/A Yes Yes 2 (15.2) (12.7)
13102A, 13103A, 13105A, 13108A 2.55 (65) 0.65 (17) 0.25 (6) N/A Yes Yes 4
13104R 2.60 (66) 0.60 (15) 1.10 (28) 0.20 (5) Yes No 1
14100A, 14102A 2.60 (66) 0.60 (15) 0.29 (7) N/A Yes Yes 1
14101R, 14102R 3.02 (77) 0.60 (15) 0.70 (18) 0.20 (5) Yes No 6
14101A 2.60 (66) 0.60 (15) 0.29 (7) N/A Yes Yes 1
15100A, 15101A 3.00 (76) 0.60 (15) 0.60 (15) N/A Yes Yes 5
2.64 (67) 0.60 (15) Yes Yes 1
2.87 (73) 0.60 (15) Yes Yes 3

Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com V8-T5-67

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com

5.5 Photoelectric Sensors

Comet Series Sensors

5 Approximate Dimensions in Inches (mm), unless otherwise noted

Accessories Adjustable Protective Bracket

5 Flush Mount Bracket—6161AS5296

5 R 0.25 (6) 1.00 0.375 (9.5) 1.20
5 4 Places (25.5) (30.5)

1.38 1.20
(35.1) (30.5)

ø 0.281 (7.1) 2.70 2.00 (50.8) 4.31
(68.6) (109.5)
5 4 Places 0.73 1.48 2.08
(19) (37.5) (53) 2.47
5 0.63 (62.7)
0.68 (16)
(17) 2.63
(66.8) 1.63
5 0.30 440-12 Stud
0.60 (7.6) 2 Places (41.4)
(15)
0.70 3.00 (76.2)
5 (17.8) 4.00 (101.6)

5
1.75

5 (44)

5 Flush Mount Bracket—6161AS5297 Comet Ball Swivel Bracket

5 R 0.25 (6) 1.00 ø 0.20 (5.1)
4 Places (25.5) 2 Places

5 ø 0.281 (7.1) 0.375 (9.5) 0.74 0.23
(18.8) (5.8)
4 Places 1.48 2.08 1.18
(37.5) (53) 0.37 (30.0)
5 (9.4)
0.63 1.64
(41.7)
5 (16)

5 0.30 440-12 Stud
(7.6) 2 Places

5

1.75

5 (44)

5

5

5

5

5

5

5

5

5

5

5

5

V8-T5-68 Volume 8—Sensing Solutions CA08100010E—March 2012 www.eaton.com

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com