Forms + Surfaces Door & Cabinet Pulls

1" x 1.5" (25mm x 38mm)

Grip Cross Section - wide Side
Facing Out (Actual Size)

Quadrant™ 1500

24" (610mm)
116" (2946mm)

HDQUA007 grip shown in Bronze US10 with HDQUA012 HDQUA007
Clamp standoffs shown in Stainless Steel US32D 1" x 1.5" (25mm x 38mm) Grip

standoffs GRIPs

model # pull projection grip model # oal

HDQUA011 2.64" (67mm) HDQUA001 straight up to 18" (457mm)

HDQUA012 2.64" (67mm) HDQUA002 straight 18.25" to 24" (464mm to 610mm)

HDQUA013 2.64" (67mm) HDQUA003 straight 24.25" to 48" (616mm to 1219mm)

HDQUA002 grip shown in Stainless Steel US32D with HDQUA013 Vise standoffs shown in Stainless Steel US32 Grips are the same for HDQUA004 straight 48.25" to 72" (1226mm to 1829mm)
1000 and 1500 Series. Grip HDQUA005 straight 72.25" to 92" (1835mm to 2337mm)
orientation and standoffs HDQUA006 straight 92.25" to 116" (2343mm to 2946mm)
determine door pull profile. HDQUA007 Arc 24" (610mm)

Available as ADA compliant handrails in our CabForms® and LEVELe™ elevator interiors (excluding Note: To avoid flexing, 18" (457mm)
HDQUAOO7). Please call or visit our website for more information on elevator Standoffs should be spaced
handrail applications. no more than 87" (2210mm)
c.c. on straight Stainless
HDQUA011 HDQUA012 HDQUA013 Steel grips or 75" (1905mm) HDQUA001, 02, 03, 04, 05, 06
Block Clamp Vise c.c. on straight Bronze grips. 1" x 1.5" (25mm x 38mm) Grips
Longer lengths will require
intermediate standoffs.

Materials Stainless Steel: US32 (polished), US32D (satin), SSS (stippled) Mounting Single mounted on wood or metal doors. How to Provide model numbers and metal/finish
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed), Options: Back-to-back on wood, metal or glass doors. Refer to Specify: for both grips and standoffs; quantities;

SBR (stippled), S10 (stippled oil-rubbed) Mounting Options C1, C2, C3, C4, C5 (page 73). pull oal and c.c.; mounting option; door

Santoprene® Elastomer (grips only): BLACK material and thickness.

Sizing of Quadrant door pulls is largely defined by the customer. Pull OAL = grip length and is variable as shown above. 51 | FORMS+SURFACES
Pull c.c. = customer-defined spacing of standoffs on the grip. Standoffs are attached to grips at F+S factory.

Modular

2.875" 12" (305mm)
(73mm) 17" (432mm)

18" (457mm)
23" (584mm)

DP6121 with grip shown in Brass US3 and standoffs DP6121
shown in Black Anodized Aluminum

2.5"
(64mm)
12" (305mm)
DP6123 with grip shown in Stainless Steel US32D and standoffs shown in Stainless Steel US32 15.5" (394mm)

DP6121 is available as an ADA compliant handrail in our CabForms® and LEVELe™ elevator 18" (457mm)
interiors. Please call or visit our website for more information on elevator handrail applications. 21.5" (546mm)

24" (610mm)
27.5" (699mm)

DP6123

Materials Stainless Steel (grips & DP6123 standoffs): US32 (polished), Mounting Single mounted on wood or metal doors. How to Provide model number, center to center
& Finishes: US32D (satin) Options: Back-to-back on wood, metal or glass doors. Refer to Specify: (c.c.) dimension, quantity, standoff and

Brass (grips & DP6123 standoffs): US3 (polished), US4 (satin) Mounting Options C1, C2, C3, C4, C5 (page 73). grip metals and finishes, mounting
Anodized Aluminum (DP6121 standoffs): Clear, Black
option, door material and thickness.

FORMS+SURFACES | 52

DP6912 with grip shown in Stainless Steel US32D and12" (305mm) 2"
standoffs shown in Brass US318" (457mm) (51mm)

2.625"18" (457mm) DP6912
(67mm)24" (610mm)
12" (305mm)
DP6112 with grip shown in Stainless Steel US32D and standoffs shown in Stainless Steel US32 13.5" (343mm)
18" (457mm)
19.5" (495mm)
24" (610mm)
25.5" (648mm)

DP6112

Materials Stainless Steel: US32 (polished), US32D (satin) Mounting Single mounted on wood or metal doors. How to Provide model number, center to center
& Finishes: Brass: US3 (polished), US4 (satin) Options: Back-to-back on wood, metal or glass doors. Refer to Specify: (c.c.) dimension, quantity, standoff and

Mounting Options C1, C2, C3, C4, C5 (page 73). grip metals and finishes, mounting

option, door material and thickness.

53 | FORMS+SURFACES

MODULAR continued

9" 2"
(229mm) (51mm)

DP6916 with grip shown in Stainless Steel US32 and14" (356mm)
standoffs shown in Stainless Steel US32D16.625" (422mm)
14" (356mm)
16.125" (410mm)DP6916

11.5" 3.25"
(292mm) (83mm)

DP6926 with grip shown in Stainless Steel US32 and standoffs shown in Brass US3

DP6926

Materials Stainless Steel: US32 (polished), US32D (satin) Mounting Single mounted on wood or metal doors. How to Provide model number, quantity,
& Finishes: Brass: US3 (polished), US4 (satin) Options: Back-to-back on wood, metal or glass doors. Refer to Specify: standoff and grip metals and finishes,

FORMS+SURFACES | 54 Mounting Options C1, C2, C3, C4, C5 (page 73). mounting option, door material and

thickness.

3.25" 12" (305mm)
(83mm) 13.5" (343mm)
18" (457mm)
DP6922 19.5" (495mm)
24" (610mm)
25.5" (648mm)

DP6922 with grip shown in Stainless Steel US32D and standoffs shown in Stainless Steel US32

Materials Stainless Steel: US32 (polished), US32D (satin) Mounting Single mounted on wood or metal doors. How to Provide model number, center to center
& Finishes: Brass: US3 (polished), US4 (satin) Options: Back-to-back on wood, metal or glass doors. Refer to Specify: (c.c.) dimension, quantity, standoff and

Mounting Options C1, C2, C3, C4, C5 (page 73). grip metals and finishes, mounting

option, door material and thickness.

55 | FORMS+SURFACES

FORMS+SURFACES | 56

cabinet pulls

Forms+Surfaces cabinet pulls are the result of more than four decades of design and
manufacturing innovation. Shaped to complement our door pulls or be used on their own, pulls

are available in Stainless Steel, Bronze, Brass, Chrome, Aluminum and Black Neoprene.

57 | FORMS+SURFACES

Cadence™ 2" 1.75"
(51mm) (44mm)

1.25" 1.5"
(32mm) (38mm)
6.75" (171mm)
7.25" (184mm)

4" (102mm)
4.5" (114mm)

DPC7553-06 DPC7553-04

1.125" 1.38" .44" 1.38"
(29mm) (35mm) (11mm) (35mm)

1.625" 1.38"
(41 mm) (35mm)

L-R: DPC7553-06, DPC7552-04, DPC7553-04, DPC7551-04 shown in Stainless Steel US32D 4" (102mm)
4.44" (113mm)

4" (102mm)
4.5" (114mm)

3" (76mm)
3.44" (87mm)

DPC7552-04 DPC7551-04 DPC7555-03

(not shown in photo)

Materials Stainless Steel: US32 (polished), US32D (satin) Installation: Cadence cabinet pulls are designed to be How to Provide cabinet pull model number,
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed) used with 3/4" (19mm) thick cabinet doors Specify: quantity, metal and finish.
or drawers and are installed using 8-32x1"
FORMS+SURFACES | 58 screws (included with order).

Luna™

LUC1133-03 shown in Stainless Steel US32D LUC1144-04 shown in Bronze US9

1" 1"
(25mm) (25mm)

1" 1.5" 1" 1.5"
(25mm) (38mm) (25mm) (38mm)

LUC1100-01 shown in Bronze US10B .5" 3" (76mm) (3.5" 89mm)
(13mm) 4.5" (114mm) 5" (127mm)
Materials Stainless Steel: US32 (polished), US32D (satin)
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed) .5" 1.5"
(13mm) (38mm)

1"
(25mm)
1.5" (38mm)

LUC1100-01 LUC1133-03 LUC1144-04

Installation: Luna cabinet pulls are designed to be used How to Provide cabinet pull model number,
with 3/4" (19mm) thick cabinet doors or Specify: quantity, metal and finish.
drawers and are installed using two 8-32 x 1"
screws (included with order).

59 | FORMS+SURFACES

Circuit™ .625" 1.25"
(16mm) (32mm)

2.38" (152mm)

.938" 2" CRC1101
(24mm) (51mm) Coat Hook

.625" 1.38" .5" 1.25"
(16mm) (35mm) (13mm) (32mm)

Clockwise from top left: CRD1101, CRC1102, CRC1101 & CRC1103 shown in Stainless Steel MSS 7" (178mm)
10" (254mm)

4" (102mm)
6" (152mm)

3" (76mm) or 4" (102mm)
6" (152mm)

CRD1101 CRC1102 CRC1103
Large "C" Pull Small "C" Pull
Pull

Materials Stainless Steel: MSS (matte), US32 (polished) Installation: Circuit cabinet pulls are designed to be used How to Provide cabinet pull model number,
& Finishes: Bronze: US9 (polished) with 3/4" (19mm) thick cabinet doors or Specify: center-to-center dimension
drawers and are installed using two 8-32 x 1"
FORMS+SURFACES | 60 screws (included with order).* (CRC1103 only), quantity, metal

and finish.

*Due to installation variances, mounting screws are not provided with Circuit coat hooks unless requested.
The CRD1101 Large “C” cabinet pull is suitable for single throughbolt mount only, on wood or metal faces.

Meridian™

DPC9101, DPC9102 shown in Bronze US10 .75" 1.5"
(19mm) (38mm)

DPC9102 shown in Stainless Steel US32D 6" (152mm)
7.625" (194mm)
Materials Stainless Steel: US32 (polished), US32D (satin)
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed) DPC9101 DPC9102
(left) (right)

Installation: Meridian cabinet pulls are designed to be How to Provide cabinet pull model number,
used with 3/4" (19mm) thick cabinet doors or Specify: quantity, metal and finish.
drawers and are installed using two 8-32 x 1"
screws (included with order).

61 | FORMS+SURFACES

NEOPRENE .469" 1.25"
(12mm) (32mm)
.625" 1"
(16mm) (25mm)

.875" 2" (51mm) 2.75" (70mm)
(22mm) 3" (76mm) 3.219" (82mm)

1.75" (44mm) 1.75" (44mm)
diameter

HC242 HC225 HC213

1" (25mm) .75" 1" (25mm) 1.125" .875" (22mm) 2"
diameter (19mm) diameter (29mm) diameter (51mm)

1" (25mm) .75" (19mm) .875" (22mm)

HC202 HC215 HC254

L-R: HC242, HC225, HC213, HC202, HC215, HC254, HC209 .281" 1.438"
(7mm) (37mm)

For additional sizes and more design options visit www.forms-surfaces.com 1.094"
(28mm)
1.344"
(34mm)

HC209

Materials Neoprene: molded neoprene over metal cores Installation: Neoprene cabinet pulls are designed to be How to Provide cabinet pull model number
& Finishes: Color: Black used with 3/4" (19mm) thick cabinet doors or Specify: and quantity.
drawers and are installed using a variety
FORMS+SURFACES | 62 of screws (included with order).

WAVE™

WAC1800-01 shown in 305 (black matte) and WAC1822-01, WAC1811-01 shown in 302 (clear matte)
302 (clear matte) 1.5" 1.125"

1.5" (38mm) (29mm)
(38mm)

Cross Section WAC1800-01 .75" (20mm)

1.125" 1.5" 1.125" 1.5" 1.125"
(29mm) (38mm) (29mm) (38mm) (29mm)

1.5"
(38mm)

WAC1833-03 shown in 305 (black matte), WAC1833-04 shown in 302 (clear matte) 3" (76mm) 4" (102mm) 1" (25 mm)
4" (102mm) 5" (127mm)
For additional sizes and more design options visit www.forms-surfaces.com
WAC1833-03 WAC1833-04 WAC1811-01
Materials Anodized Aluminum: 301 (clear polished), 302 (clear matte), WAC1822-01
& Finishes: 305 (black matte)
Installation: Wave cabinet pulls are designed to be used How to Provide cabinet pull model number,
with 3/4" (19mm) thick cabinet doors or Specify: quantity and finish.
drawers and are installed using a variety
of screws (included with order).

63 | FORMS+SURFACES

Token™

.688" (17mm) 1" (25mm) .688" (17mm) 1" (25mm) .688" (17mm) 1.094"
diameter diameter diameter (28mm)

HC461 .688" (17mm) HC462 .688" (17mm) HC463 .688" (17mm)

.875" (22mm) .875" .688" (17mm) 1" (25mm)
diameter (22mm) diameter

.875" (22mm) HC465 .688" (17mm)

HC401

L-R: HC461, HC462 & HC463 shown in Chrome US26D, HC401 shown in Chrome US26, HC465 shown in Matte
Black Anodized Aluminum

For additional sizes and more design options visit www.forms-surfaces.com

Materials Anodized Aluminum (all except HC401): Matte Black Installation: Token cabinet pulls are designed to be used How to Provide cabinet pull model number,
& Finishes: Brass: US3 (polished) with 3/4" (19mm) thick cabinet doors or Specify: quantity, metal and finish.
drawers and are installed using a variety
Chrome: US26 (polished), US26D (satin) of screws (included with order).

FORMS+SURFACES | 64

1" (25mm) 1.25" (29mm) .875" (22mm) 1" (25mm)
diameter diameter

.75" (19mm) .625" (16mm)

HC403 HC464

.875" (22mm) 1" (25mm) 1" (25mm) .875" (22mm)
diameter diameter

.875" (22mm) .813" (21mm)

HC402 HC404

L-R: HC403, HC464 & HC402 shown in Brass US3, HC404 shown in Chrome US26

For additional sizes and more design options visit www.forms-surfaces.com

Materials Anodized Aluminum (HC464 only): Matte Black Installation: Token cabinet pulls are designed to be used How to Provide cabinet pull model number,
& Finishes: Brass: US3 (polished) with 3/4" (19mm) thick cabinet doors or Specify: quantity, metal and finish.
drawers and are installed using a variety
Chrome: US26 (polished), US26D (satin) of screws (included with order).

65 | FORMS+SURFACES

Mesa™ 3.5" (89mm) 3" (76mm) 1.5" (38mm)

Clockwise from top left: HC423, HC421, HC420, HC433, HC431, HC430 .5" (13mm)
Materials Anodized Aluminum:
& Finishes: HC423 2.25" (57mm)
1.75" (44mm)
FORMS+SURFACES | 66
HC421 1.5" (38mm)
1" (25mm)

HC420

3.5" (89mm) .875" (22mm)
3" (76mm)

.25"
(6mm)

HC433 2.25" (57mm)
1.75" (44mm)

HC431 1.5" (38mm)
1" (25mm)

HC430

Installation: Mesa cabinet pulls are designed to be used How to Provide cabinet pull model number,
with 3/4" (19mm) thick cabinet doors or Specify: quantity and finish.
drawers and are installed using a variety
of screws (included with order).

SWEEP™

1" 1.5" (38mm)
(25mm)

SWC1400-01

SWC1400-01 shown in Stainless Steel US32

and Bronze US9 1"

1" (25mm) 1.5" (38mm) .75"
(19mm)
(25mm) 1.5" (38mm) 1.5" (38mm)

Top to Bottom: SWC1400-04, SWC1700-04, SWC1600-04 shown in Stainless Steel US32 and Bronze US9 4" (102mm)
5" (127mm)

4" (102mm)
5.25" (133mm)

4" (102mm)
5" (127mm)

For additional sizes and more design options visit www.forms-surfaces.com SWC1400-04 SWC1700-04 SWC1600-04

Materials Stainless Steel: US32 (polished), US32D (satin) Installation: Sweep cabinet pulls are designed to be used How to Provide cabinet pull model number,
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed) with 3/4" (19mm) thick cabinet doors or Specify: quantity, metal and finish.
drawers and are installed using a variety of
screws (included with order).

67 | FORMS+SURFACES

FORMS+SURFACES | 68

options & pricing

Choose from a variety of push plates and indicator discs to match your door pull selection. Determine materials
and finishes suitable for your project. And find the right mounting option for your door type.

The information presented in this catalog is intended as a starting point. For current pricing, product data
sheets, and additional series-specific details, visit our website at www.forms-surfaces.com.

69 | FORMS+SURFACES

4" 6" 9"
(102mm) (152mm) (229mm)

PUSH PLATES & Indicator discs 14" (356mm), 18" (457mm),
24" (610mm)
4"
14" (356mm), 18" (457mm), (102mm)
24" (610mm)

14" (356mm), 18" (457mm),
24" (610mm)

DP8104 DP8106 DP8109

4"
(102mm)

2.5" (64mm)

4"
(102mm)
1.5"
DP8001 PUSH (38mm)
DP8002 PULL
14" (356mm), 18" (457mm),
Clockwise from left: DP8004, DP8106, DP8001, DP8604-18, DP8604-24, DP8002, DP8001, DP8002 24" (610mm)
18" (457mm)
3.25" (83mm) 24" (610mm)

DP8003 PUSH DP8504 DP8604-18 PUSH DP8604-24 PUSH
DP8004 PULL DP8704-18 PULL DP8704-24 PULL

Materials Stainless Steel: US32 (polished), US32D (satin) Mounting Push plates and indicator discs are designed to be How to Provide model number, quantity, metal
& Finishes: Bronze: US9 (polished), US10 (satin), US10B (oil-rubbed) Options: mounted with a two-part epoxy (included with order). Specify: and finish, mounting option, door

Brass: US3 (polished), US4 (satin) To be used beneath a door pull, they may be drilled for material and thickness, door type and
Lettering is recessed and filled in black
mounting for an additional nominal fee. handing, vertical or horizontal engraving.
FORMS+SURFACES | 70

materials & finishes Not all metal and finish combinations shown are available for all pulls.
Please refer to individual product pages for collection-specific information.

301 302 305 BLACK US3 US4
Material: Aluminum Material: Aluminum Material: Aluminum Material: Santoprene® Material: Brass Material: Brass
Finish: Clear Polished Finish: Clear Matte Finish: Black Matte Finish: Polished Finish: Satin
Finish: Black

US9 US10 US10B SBR S10 WSB
Material: Bronze Material: Bronze Material: Bronze Material: Bronze Material: Bronze Material: Bronze
Finish: Polished Finish: Oil-Rubbed Finish: Stippled Finish: Stippled Oil-Rubbed Finish: Wrought Oil-Rubbed
Finish: Satin

US32 US32D SSS AL1 BZ1
Material: Stainless Steel Material: Stainless Steel Material: Stainless Steel Material: Aluminum Material: Bronze
Finish: Hand-Rubbed Patina Finish: Hand-Rubbed Patina
Finish: Polished Finish: Satin Finish: Stippled
71 | FORMS+SURFACES

Door pull overview & ordering Guidelines

The following chart provides an overview of our three door pull collections—Cast, Tubular and Configurable—and can serve as a guide for ordering Forms+Surfaces door pulls.

CAST DOOR PULLS (refer to pages 7-25) TUBULAR DOOR PULLS (refer to pages 27-41) CONFIGURABLE DOOR PULLS (refer to pages 43-55)

Construction Cast door pulls are cast of solid metal. Tubular door pulls feature round or rectangular tubular Configurable door pulls consist of multiple elements that must be specified separately.
profiles in various diameters and cross-section sizes. Based on a “kit of parts” format, families within this collection allow specifiers to choose
from a range of standard components to create custom-looking door pull designs.

Design Designs range from organic sculptural forms to crisp Options include round or rectangular tubular profiles in a Individual pulls consist of two basic elements that must be specified separately:
Options geometric shapes. variety of sizes and orientations, and straight, offset, angled Grips and Standoffs or Finials.
or c-shaped designs.

Grips Standoffs / Finials
The “graspable” part of the pull. Design The two (or more) elements that support the
options include: grip. Some pulls have finials; others have
• straight or curved versions standoffs. The function of each is similar.
• round or rectangular profiles in a Design options vary per family and include a
variety of distinctive shapes.
variety of sizes and orientations

Sizes Overall length and center-to-center dimensions are generally Tubular door pulls are available in numerous standard overall Sizing of most Configurable door pulls is def.ined by the customer, not by pre-set options.
fixed per Cast door pull design/model. See individual product lengths and/or center-to-center options. Custom sizes are In most cases, overall lengths and/or center-to-center dimensions are completely
pages for specifics. also available. See individual product pages for specifics. variable and allow customers to specify grip lengths and/or standoff spacing to meet
project-specific requirements. See individual product pages for specifics.

Metals & Individual pulls consist of a single metal/finish combination. Individual pulls consist of a single metal/finish combination. On individual pulls, Grips and Standoffs / Finials may be specified in matching or
Finishes • Metal options vary per family and include Stainless Steel, • Metal options vary per family and include Stainless Steel, contrasting metals and finishes. For each:
• Metal options vary per family and include Stainless Steel, Bronze and/or Brass.
Bronze, Brass and/or Aluminum. Bronze and/or Brass. • Finishes are defined per metal.
• Finishes are defined per metal. • Finishes are defined per metal. • See individual product pages for product-specific options.
• See individual product pages for product-specific options. • See individual product pages for product-specific options.

Mounting Varies per door pull design. See product pages and Varies per door pull design. See product pages and Varies per door pull design. See product pages and Mounting Options chart on
Options Mounting Options chart on page 73 for details. Mounting Options chart on page 73 for details. page 73 for details.

To Order • Door pull quantity • Door pull quantity • Door pull quantity
Specify • Door pull model number • Door pull model number • Grip model number
• Door pull metal & finish • Door pull metal & finish • Standoff / Finial model number
All information • Door pull dimensions (as applicable per design; refer to • Door pull dimensions (as applicable per design; refer to • Grip metal & finish
listed is • Standoff / Finial metal & finish
required for product page for details) product page for details) • Standoff/ Finial quantity as required per design (refer to product page for details)
order • Door material & thickness • Door material & thickness • Dimensions as applicable per design (refer to product page for details)
processing. • Mounting option (refer to individual product pages for • Mounting option (refer to individual product pages for • Door material & thickness
• Mounting option (refer to individual product pages for product-specific options)
product-specific options) product-specific options)

FORMS+SURFACES | 72

mounting options

A

A-1 Back-to-back mount on wood A-2 Single mount on wood or A-3 Concealed single mount on A-4 Single mount on glass door A-5 Back-to-back mount on glass *A-6 Concealed single mount on
aluminum frame door with Rota- with end cap purchased separately. door with Rota-Lok. wood door with threaded insert
or metal door with Rota-Lok. metal door with through bolt. Lok and customer’s reinforcement. and Rota-Lok.

B

B-1 Back-to-back mount on wood B-2 Single mount on glass door B-3 Back-to-back mount on glass B-4 Single mount on wood or metal *B-5 Concealed single mount B-6 “L” Configuration: Adapt one B-7 Concealed single mount on
with end cap purchased separately. door with Rota-Lok. door with through bolt. on wood door with threaded end of each pull for back-to-back aluminum frame door with Rota-
or metal door with Rota-Lok. mounting with Rota-Lok. Specifiy Lok and customer’s reinforcement.
“B” mounting for other ends.
insert and Rota-Lok.

C

C-1 Back-to-back mount on wood C-2 Concealed single mount *C-3 Concealed single mount on C-4 Back-to-back mount on glass C-5 Single mount on wood or metal
or metal door with shoulder bolt. on aluminum frame door with wood door with shoulder bolt and door with through bolt.
shoulder bolt and customer’s threaded insert. door with shoulder bolt.
reinforcement.

*Forms+Surfaces offers but does not recommend concealed mounting on wood doors. Frequent or heavy use can compromise the integrity of this mounting.
73 | FORMS+SURFACES

FORMS+SURFACES | 74

system applications

Our door pulls offer unparalleled creative freedom. However, the visual possibilities don't
stop there. Our product mix also includes expertly crafted doors whose design themes, materials

and finishes complement those in our door pull line. In addition, several of our standard pulls
are available as handrails in our LEVELe™ and CabForms® elevator interiors.

75 | FORMS+SURFACES

DOORS & door pulls

clockwise from left to right: 1) Stainless Steel
doors with Dallas Impression pattern and Stainless
Rectangular pulls; 2) Fused Bronze door with Sextant
pull; 3) ViviForm Impression Glass doors with Meridian
pulls; 4) Bonded Bronze doors with Ara pulls

Stainless Steel and Fused Metal® Doors and a variety of materials and finishes make
unite a full range of UL® fire labeling options custom doors easily attainable.
with an extensive array of designs, patterns
and Fused Metal colors. The result is a line Bonded Metal® Doors are made from
of beautiful, affordable alternatives to generic a highly durable cast composite with the
fire doors. character and appearance of solid metal.
A wide range of colors and patterns is
Stile & Rail Doors combine sophistication available.
with design flexibility. Three configurations

FORMS+SURFACES | 76

left to right: 1) Bonded Bronze doors with Rain pattern
and Cadence pulls; 2) Stile & Rail doors with ViviForm
Impression Glass insets and Sextant pulls; 3) Stile &
Rail doors with Bonded Aluminum inset and Allegro pull

Glass Doors are available with any of our System 7 Doors are contemporary
VividGlass architectural glass options, interpretations of the traditional glazed door,
including laminated glass in a variety of characterized by precise detailing and rugged
colors, patterns and translucency levels, construction. Stainless Steel door faces are
and ViviForm Impression glass in several enhanced by a rich palette of colors and
light-diffusing, three-dimensional designs. finishes. Several glazing configurations are
standard and feature multiple glass options.

77 | FORMS+SURFACES

ELEVATOR INTERIORS & handrails

LEVELe interiors in a variety of materials and configurations

ELEVATOR HANDRAILS are designed for LEVELe Elevator Interiors were designed
use with LEVELe™ and CabForms® Elevator with the requirements of today's buildings
Interiors but can be used in any elevator in mind. LEVELe evolves the CabForms
cab. They are available in several standard program, introduced more than ten years
designs that can be specified for cab back ago, with thinner walls, greater energy
walls and/or side walls. Handrails are efficiency, and an expanded range of material
available in Stainless Steel or Bronze, each and handrail options. Self-revealing extrusion
in a variety of finishes. channels, aluminum panel frames, and a

FORMS+SURFACES | 78

structural backer come together to create CabForms® Elevator Interiors are also aesthetics and resistance to abuse are left to right: 1) Rectangular; 2) Quadrant;
a lightweight system that is easy to install ideal for new equipment or modernization important concerns. CabForms Series 2000 3) Sextant; 4) Modular; 5) Round
and maintain. LEVELe Elevator Interiors projects. Complete packages are available features a unique stile, rail and inset design.
can be configured to meet the needs of any for all typical sizes of passenger and System elements in a variety of materials
new equipment or modernization project. service elevators, single or double opening. and finishes may be selected to coordinate
Complete packages are available for all CabForms Series 1000 is a rugged or contrast with one another—the result is
typical sizes of passenger and service cabs, Stainless Steel full-panel version optimized a series of highly durable, visually exciting
single or double opening. for any public area where maintainable elevator interiors.

79 | FORMS+SURFACES

We maintain an Environmental Management System and are continually working to improve our impact through efficiency, material selection, vendor education, employee
involvement, and an unwavering commitment to being exemplary corporate citizens. If you would like additional information on our Environmental Management System or our
company environmental initiatives and policies, please feel free to contact our Sustainability Team at [email protected].

offices worldwide | 800.451.0410 | 412.781.9003 | www.forms-surfaces.com

Member of the USGBC | Member of the EGBC | LEED® Accredited Professionals on Staff | FSC Certified Supplier | SCS-COC-001461 © 1996 Forest Stewardship Council A.C.

FORMS+SURFACES | 80 Printed on 50% recycled, 25% post consumer paper

FSHWBRO-0614-2400-REV003