CULTURAL CENTER HEYDAR ALIYEV,
BAKU, AZERBAIJAN, 2012
Zaha Hadid
PROFILES & SYSTEMSCURVE AND BENDABLE PROFILES
PROFILES & SYSTEMS
PROFILES & SYSTEMS
PRO...CURVE LINE
PRO CURVE LINE are a range of profiles that may be curved/shaped, with a special system of perforations allowing them to be bent so that particular geometric
shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements. The profiles in
the PRO CURVE LINE may be used as transition or edging profiles or to create joining and expansion joints on any type of ceramic, parquet, wood, laminate/
melamine coated wood, marble, carpeted, Palladian, Venetian floor, etc.
The profiles are made in AISI 304/1.4301-V2A stainless steel, aluminium and brass and may be easily shaped by using the PROCURVE MACHINE to bend the
profiles mechanically.
PROTERMINAL PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped, with a special 2017
CURVE system of perforations allowing them to be bent so that particular geometric shapes may be easily obtained in
situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
STAINLESS STEEL AISI 304/1.4301-V2A with a separation of 3 mm. The product is made in stainless steel AISI 304/1.4301-V2A in various heights (6, 8, 10
CURVABLE and 12,5 mm) in 2.7 m bars.
PTACCV 06 3
H 6 mm
PTACCV 08
H 8 mm
PTACCV 10
H 10 mm
PTACCV 125 POLISHED STAINLESS STEEL AISI 304/1.4301-V2A with protective film COLOURS
H 12,5 mm bar length 2,7 lm - pack. 20 Pcs - 54 lm - 10/10 mm
AC - Polished stainless steel
PTACCV 15 Article H mm AISI 304/1.4301-V2A
H 15 mm
PTACCV 06 6
PTACCV 20
H 20 mm PTACCV 08 8
PTACCV 10 10
PTACCV 125 12,5
PTACCV 15 15
PTACCV 20 20
EXEMPLES OF LAYING LAYING INSTRUCTIONS
172 1. Choose the “PROTERMINAL CURVE” with the required height and
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or simply
insert the punched base under the floor laid with the same adhesive.
If it is used as a joining profile, bring each floor to the edge of the
profile.
SUITABLE FOR USE IN CONTACT WITH FOODSTUFFS
PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature PROTERMINAL
a special system of perforations allowing them to be bent easily so that particular geometric shapes may be CURVE
easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic
requirements and with a separation of 3 mm of sandable profile. The product is made in natural brass in 2.7 m NATURAL BRASS
bars and heights of 6, 8, 10, 12.5, 15 and 20 mm. CURVABLE
PTONCV 06 3
H 6 mm
PTONCV 08
H 8 mm
PTONCV 10
H 10 mm
NATURAL BRASS CURVABLE thermo packed 10pcs EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS PTONCV 125
bar length 2,7 lm - pack. 40 Pcs - 108 lm (H:15; 20 mm - 54 lm) H 12,5 mm
Article H mm
PTONCV 06 6 PTONCV 15
PTONCV 08 8
PTONCV 10 10 H 15 mm
PTONCV 125 12,5
PTONCV 15 15 1. Choose the “PROTERMINAL CURVE” in the required height and
PTONCV 20 20 material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
COLOURS MACHINE. 4. If necessary fix with screws and screw anchors or simply PTONCV 20
insert the punched base under the floor laid with the same adhesive.
H 20 mm
Any oxidation marks may be easily removed with specific chemical
products (Sidol-Smac, etc.). If it is used as a joining profile, bring each
floor to the edge of the profile.
ON - Natural brass
= On demand, price and delivery time to be agreed.
2017 PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature PROTERMINAL
a special system of perforations allowing them to be bent easily so that particular geometric shapes may be CURVE
easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic
requirements and with a separation of 3 mm of sandable profile. The product is made in natural aluminium in 2.7 NATURAL ALUMINIUM
m bars and heights of 6, 8, 10, 12.5, 15 and 20 mm. CURVABLE
PTANCV 06 3
H 6 mm
PTANCV 08
H 8 mm
PTANCV 10
H 10 mm
NATURAL ALUMINIUM CURVABLE thermo packed 10 Pcs EXEMPLES OF LAYING (for laying instructions, see above) PTANCV 125
bar length 2,7 lm - pack. 40 Pcs - 108 lm H 12,5 mm
Article H mm
PTANCV 06 6 PTANCV 15
PTANCV 08 8
PTANCV 10 10 H 15 mm
PTANCV 125 12,5
PTANCV 15 15
PTANCV 20 20 COLOURS PTANCV 20
H 20 mm
AN - Natural aluminium
173
2017
PROELEGANT CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special PROELEGANT
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained CURVE
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 6 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of NATURAL BRASS
8-10-12.5 and 14 mm. CURVABLE
PELONCV 08 6
H 8 mm
PELONCV 10
H 10 mm
PELONCV 125
H 12,5 mm
NATURAL BRASS CURVABLE thermo packed 5 Pcs COLOURS PELONCV 14
bar length 2,7 lm - pack. 20 Pcs - 54 lm
ON - Natural brass
Article H mm H 14 mm
PELONCV 08 8
PELONCV 10 10
PELONCV 125 12,5 EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
PELONCV 14 14
1. Choose the “PROELEGANT CURVE” in the required height and
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
adhesive. Any oxidation marks may be easily removed with specific
chemical products (Sidol-Smac, etc.).
= On demand, price and delivery time to be agreed.
2017 PROELEGANT CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special PROELEGANT
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained CURVE
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 6 mm of sandable profile. The product is made in silver anodised aluminium in 2.7 m bars ANODISED SILVER ALUMINIUM
and heights of 8-10-12.5 mm. CURVABLE
PELAACV 08 6
H 8 mm
PELAACV 10
H 10 mm
PELAACV 125
H 12,5 mm
ANODISED SILVER ALUMINIUM CURVABLE thermo packed COLOURS EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
AA - Anodised silver alum.
Article H mm
PELAACV 08 8
PELAACV 10 10
PELAACV 125 12,5
1. Choose the “PROELEGANT CURVE” in the required height and
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
adhesive. Any oxidation marks may be easily removed with specific
chemical products (Sidol-Smac, etc.).
175
PROFINAL CURVE PROFINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained
NATURAL BRASS in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
CURVABLE with a separation of 8 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of
8, 10 and 12.5 mm.
8
PRFONCV 08
H 8 mm
PRFONCV 10
H 10 mm
PRFONCV 125
H 12,5 mm
NATURAL BRASS CURVABLE thermo packed 5 Pcs COLOURS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
ON - Natural brass
Article H mm
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS PRFONCV 08 8
PRFONCV 10 10
PRFONCV 125 12,5
1. Choose the “PROFINAL CURVE” in the required height and 2017
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
adhesive. Any oxidation marks may be easily removed with specific
chemical products (Sidol-Smac, etc.). If it is used as a joining profile,
bring each floor to the edge of the profile.
PROFINAL CURVE PROFINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained
ANODISED SILVER ALUMINIUM in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
CURVABLE with a separation of 8 mm of sandable profile. The product is made in silver anodised aluminium in 2.7 m bars
and heights of 8, 10 and 12.5 mm.
8
PRFAACV 08
H 8 mm
PRFAACV 10
H 10 mm
PRFAACV 125
H 12,5 mm
ANODISED SILVER ALUMINIUM CURVABLE COLOURS
thermo packed - bar length 2,7 lm - pack. 20 Pcs - 54 lm
AA - Anodised silver alum.
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS Article H mm
PRFAACV 08 8
PRFAACV 10 10
PRFAACV 125 12,5
1. Choose the “PROFINAL CURVE” in the required height and
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
adhesive. Any oxidation marks may be easily removed with specific
chemical products (Sidol-Smac, etc.). If it is used as a joining profile,
bring each floor to the edge of the profile.
= On demand, price and delivery time to be agreed.
176
PROJOLLY CURVE is a range of terminal transition profiles that may be curved/shaped, with a special system of PROJOLLY
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows CURVE
decorative patterns to be created at will according to technical and aesthetic requirements. It is made in natural
brass, height H 8 - H 10mm, length 2.7 lm. NATURAL BRASS
CURVABLE
PJONCV 08
H 8 mm
PJONCV 10
H 10 mm
NATURAL BRASS CURVABLE thermo packed 5 Pcs COLOURS EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
ON - Natural brass 1. Choose the “PROJOLLY CURVE” in the required height and material.
Article H mm 2. Cut the profile to the necessary length, calculating the total length.
3. Bend the profile mechanically with the PROCURVE MACHINE.
PJONCV 08 8 4. If necessary fix with screws and screw anchors or simply insert
the punched base under the floor laid with the same adhesive.
PJONCV 10 10
2017 PROJOLLY CURVE is a range of terminal transition profiles that may be curved/shaped, with a special system of PROJOLLY
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows CURVE
decorative patterns to be created at will according to technical and aesthetic requirements. It is made in anodised
aluminium, height H 8 -H 10mm, length 2.7 lm. ANODISED SILVER ALUMINIUM
CURVABLE
PJAACV 08
H 8 mm
PJAACV 10
H 10 mm
ANODISED SILVER ALUMINIUM CURVABLE thermo packed COLOURS EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
AA - Anodised silver alum. 1. Choose the “PROJOLLY CURVE” in the required height and
Article H mm material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
PJAACV 08 8 MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
PJAACV 10 10 adhesive.
= On demand, price and delivery time to be agreed. 177
TERMINAL TERMINAL CURVE is a range of edging and joining profiles that may be curved/shaped, with a special system of
CURVE perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows
decorative patterns to be created at will according to technical and aesthetic requirements.Recommended for
ANODISED SILVER ALUMINIUM edging and/or joining floating floors in wood & melamine-laminated wood. It is made in anodised aluminium and
AND 10 WOOD FINISHES – CURVABLE in 10 wood effect finishes; it comes in various heights, length 2.7m.
PINT... CV 07 15 mm
H 7 mm
PINT... CV 09
H 9 mm
PINT... CV 11
H 11 mm
PINT... CV 15 ANODISED SILVER ALUMINIUM CURVABLE thermo packed ALUMINIUM 10 WOOD FINISHES thermo packed
H 15 mm bar length 2,7 lm - pack. 20 Pcs - 54 lm bar length 2,7 lm - pack. 20 Pcs - 54 lm
Article H mm Article H mm
PINTAACV 07 7 PINT... CV 09 9
PINTAACV 09 9
PINTAACV 11 11 PINT... CV 15 15
PINTAACV 15 15 Available in the wood finishes: 04W-05W-07W-08W-09W-10W-
11W-28W-29W-30W.
29 mm The code of the selected colour must be added to the article code.
E.g.: PINT... CV 09 (chosen finish Dark beech) PINT04W CV 09.
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
COLOURS
AA - Anodised silver alum. 04W - Dark beech 05W - Light oak 07W - Light cherry 08W - Dark cherry 09W - Red walnut 2017
(strip) (strip) (board) (merbau-apple-walnut)
1. Choose the “TERMINAL CURVE” in the required height and 10W - Wengé 11W - Bleached decapè 28W - Aspen oak 29W - White oak 30W - Grey oak ON DEMAND
material. 2. Cut the profile to the necessary length, calculating the (panga panga-wengè) minimum
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or quantity 500 lm
simply insert the punched base under the floor laid with the same
AO - Anodised gold alum.
adhesive.
= On demand, price and delivery time to be agreed.
PROCOVER PROCOVER is a joint-cover profile in anodised aluminium and aluminium covered with a very strong film
available in 10 wood finishes. It is applied at the end of laying two adjoining floors with the same height, having
ANODISED SILVER ALUMINIUM left a 6 - 24 mm gap between the two floors set in a thin bed of adhesive. It protects the outside edges of the
AND 10 WOOD FINISHES – CURVABLE floor/covering. It is easy to lay and attractive. The design of the profile with lower vertical arrowhead part allows
excellent anchorage with the silicone/adhesive.
PCRAA 149 14 mm
PCR... 149
H 9 mm
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
ANODISED SILVER ALUMINIUM CURVABLE thermo packed ALUMINIUM 10 WOOD FINISHES thermo packed
bar length 2,7 lm - pack. 40 Pcs - 108 lm bar length 2,7 lm - pack. 40 Pcs - 108 lm
1. Choose the “PROCOVER” with the width suitable for the gap Article H mm Article L x H mm
between the two floors to be joined, taking into consideration PCRAA 149 (Pack. 108 lm) 14 x 9
PCRAO 149 14 x 9 PCR... 149 14 x 9
2/3 mm side lap. 2. Fill the gap with single-pack silicone or with
the adhesive used for laying the floor. 3. Bury the profile into the THE WHOLE PROCOVER RANGE ON PAGES 90-91. Available in the wood finishes: 4W-05W-07W-08W-09W-10W-11W-
adhesive, making sure that both side laps of the profile rest on the 28W-29W-30W.
The code of the selected colour must be added to the article code.
coverings to be joined. E.g.: PCR...149 (chosen finish Dark beech) PCR 04W 149.
COLOURS
AA - Anodised silver alum. 04W - Dark beech 05W - Light oak 07W - Light cherry 08W - Dark cherry 09W - Red walnut
(strip) (strip) (board) (merbau-apple-walnut)
10W - Wengé 11W - Bleached decapè 28W - Aspen oak 29W - White oak 30W - Grey oak ON DEMAND
(panga panga-wengè) minimum
quantity 500 lm
AO - Anodised gold alum.
178
PROSLIDER CURVE is a range of transition profiles that may be curved/shaped, with a special system of PROSLIDER
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows CURVE
decorative patterns to be created at will according to technical and aesthetic requirements.
Recommended for joining floating floors in wood, melamine laminated wood and ceramics. It is made in natural NATURAL BRASS
brass in various heights, length 2.7 lm. CURVABLE
NATURAL BRASS CURVABLE thermo packed PDONCV 08
bar length 2,7 lm - pack. 15 Pcs - 40,5 lm H 8 mm
Article H mm PDONCV 10
H 10 mm
PDONCV 08 8
PDONCV 10 10
COLOURS
ON - Natural brass
EXEMPLES OF LAYING
LAYING INSTRUCTIONS
1. Choose the “PROSLIDER CURVE” in the required height and material.
2. Cut the profile to the necessary length, calculating the total length.
3. Bend the profile mechanically with the PROCURVE MACHINE.
4. If necessary fix with screws and screw anchors, if used for floating
floors in melamine/laminated wood, or simply insert the punched
base under the floor laid with the same adhesive.
= On demand, price and delivery time to be agreed.
PROSLIDER CURVE is a range of transition profiles that may be curved/shaped, with a special system of PROSLIDER
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows CURVE
decorative patterns to be created at will according to technical and aesthetic requirements.
Recommended for joining floating floors in wood, melamine laminated wood and ceramics. It is made in anodised ANODISED SILVER ALUMINIUM
aluminium in various heights, length 2.7 lm. CURVABLE
ANODISED SILVER ALUMINIUM CURVABLE thermo packed PDAACV 08
bar length 2,7 lm - pack. 20 Pcs - 54 lm H 8 mm
Article H mm PDAACV 10
H 10 mm
PDAACV 08 8
PDAACV 10 10
COLOURS
2017 AA - Anodised silver alum.
PROCURVE MACHINE is a manual profile bending machine for profiles of the CURVE SERIES. PROCURVE
MACHINE
PROCURVE MACHINE - complete with wheels for all profiles
Article
PCM 08
Page Items / series Minimum Minimum
available for inside radius outside radius
172
173 PTACCV 30 cm 30 cm
173 PTONCV
175 PTANCV 30 cm 30 cm
175 PELONCV
176 PELAACV 30 cm 30 cm
176 PRFONCV
177 PRFAACV 150 cm 300 cm
177 PJONCV
178 PJAACV 200 cm 300 cm
178 PINTAACV
178 PCRAA 149 200 cm
179 PCR... 149
179 PDONCV 200 cm
PDAACV
200 cm 300 cm
200 cm 300 cm
300 cm
80 cm 80 cm
100 cm 100 cm
300 cm
300 cm
179