CENIK BETA ORODJE 2019

1701BA 1717BA 1728BA
sparkproof hexagon chisels sparkproof rigid spatulas
spark-proof blades for hacksaw frames, made
L A from copper-beryllium alloy
A
S A L
L
L AS €  mm €  
mm mm mm 43,00 1 017010810 60 101,00 1 017170801 mm €  
69,00 1 017010814 80 112,00 1 017170803 300 79,00 1 017280801
150 12 10 83,50 1 017010815
200 16 14 219,00 1 017010817 1717BA/1 1737BA
250 18 14 sparkproof wall scraper brush with sparkproof wires
350 19 17
A L
1703BA/A
s​ parkproof axe LA € 
mm mm 51,00 1 017370801
​
294 29
L1 A
L 1776BA
A sparkproof knife
L AL € 
L L1 A mm mm 207,00 1 017170805
mm mm mm € 
192,00 1 017030082 100 220
340 145 82
A 1719BA8 L1 L
1703BA/P sparkproof files, 8"
sparkproof pick L1 L € 
L mm mm 112,00 1 017760801

P 145 250

M 1784BA
R sparkproof scissors

L1

L T

A L L1 €  Q
505,00 1 017030150
mm mm mm 1719BA8/P
56 1050 410 1719BA8/M
1719BA8/R L
1703BA/PL 1719BA8/T L €  L
sparkproof shovel 1719BA8/Q mm 124,00 1 017190801
128,00 1 017190805 mm €  
200 131,00 1 017190810 225 197,00 1 017840822
200 120,00 1 017190815
200 120,00 1 017190820
200
200

A L 1719BA12
sparkproof files, 12"
L1 € 
419,00 1 017030200 L
A L1 L
mm mm mm P

240 420 990 1719BA12/P L € 
mm 225,00 1 017190831

300

1727BA
sparkproof hacksaw and blade

L L1 1728BA
mm mm
L1
500 300 L

€ 
407,00 1 017270801

 251

1972/12
ultracompact drill, 12V

- ultracompact, no more than 176 mm in length; ultralightweight, no more than
1.1 kg, with battery, perfectly balanced
- double mechanical speed with steel gears and 18-position clutch
- torque up to 34 Nm and 1500 rpm (350 rpm in 1st gear); drills diameters up
to 10 mm in steel and 20 mm in wood
- 2Ah batteries and charge indicator on drill body
- triple battery self-protection (heat, overload and monitoring of charge
differences (if any) between cells) for increased safety and durable high
performance
- ergonomic nonslip handle
- front LED
- 10-mm autochuck
- belt clip (right/left side)
- selector switch, screwing-unscrewing-locking modes (for transportation)
- supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger
(45 min)

 1,1 kg

1972/12 € 
310,00 1 019720012

1972/18

percussion drill, 18 V, brushless -ultracompact-

digital brushless motor: remarkably enhanced performance, including:
increased power, reduced energy consumption, extended useful motor
life, outstanding compactness, improved power proportioning from push
button.
- torque up to 75 Nm and 2100 rpm (550 rpm in 1st gear); drills diameters up
to 13 mm in steel and 45 mm in wood
- ultracompact: no more than 192 mm in length
- 13-mm steel chuck with free ring nut on tip, in order not to damage surfaces
in case of friction
- double mechanical speed with steel gears and selector switch for drilling,
percussion drilling and screwing operations, with 20-position clutch
- gearcase made entirely from metal, for increased sturdiness and durability
- 5Ah batteries with charge indicator
- triple battery self-protection (heat, overload and management of charge
differences (if any) between cells) for increased safety and durable high
performance
- belt clip (right/left side)
- front LED
- with side handle for high torque use
- selector switch, screwing-unscrewing-locking modes (for transportation)
- ergonomic nonslip handle
- supplied in a hard case with 2 lithium ion batteries (5 Ah) and quick charger
(80 min)

 2,2 kg

1972/18 € 
765,00 1 019720018
252 

1982/12EF
reversible impact wrench, 12V

ideal for jobs in small areas, provides high torque (115 Nm), one-
handed operation

- 0-2,000 rpm / 0-3,000 rpm
- 2Ah batteries with charge indicator on wrench body
- ultracompact: no more than 163 mm in length; ultralightweight: no more than
1.1 kg, with battery, perfectly balanced
- 1/4" hexagon drive with locknut
- belt clip (right/left side)
- triple front LED
- selector switch, screwing-unscrewing-locking modes (for transportation)
- ergonomic nonslip handle
- gearcase made entirely of metal
- triple battery self-protection (heat, overload and monitoring of charge
differences (if any) between cells) for increased safety and durable high
performance
- supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger
(45 min)

 1,1 kg

1982/12EF € 
335,00 1 019820012

1984/18QM

reversible impact wrench, 18V, brushless

digital brushless motor: remarkably enhanced performance, including:
increased power, reduced energy consumption, extended useful motor life,
outstanding compactness, improved power proportioning from push button.
- 5Ah batteries with charge indicator
- ultracompact: no more than 196 mm in length
- 1/2" male drive with bush retaining ring
- belt clip (right/left side)
- triple front LED
- gearcase made entirely of metal
- selector switch, screwing-unscrewing-locking modes (for transportation)
- ergonomic nonslip handle
- triple battery self-protection (heat, overload and monitoring of charge
differences (if any) between cells) for increased safety and durable high
performance
4 modes available:
1: 270Nm; 1400 RPM
2: 360Nm; 2000 RPM
3: 450Nm; 2750 RPM
A: 450Nm Autostop - as long as the impact wrench detects a free rotation, it
applies maximum torque/speed (450Nm; 2750 RPM)
when the nut reaches the end of stroke and stops rotating, the impact wrench
keeps applying maximum torque for 1 second; then it sets itself to the lowest
level, to avoid damaging the nut
- supplied in a hard case with hexagon bit holder adaptor (1/4"), 2 lithium ion
batteries (5 Ah) and quick charger (80 min)

 2,3 kg € 
1984/18QM 890,00 1 019840018

 253

PNEUMATIC TOOLS
AND ACCESSORIES

For over 15 years Beta Utensili has supplemented its products
with a comprehensive range of pneumatic tools and accessories
developed for the automotive and industrial maintenance
markets: impact wrenches, ratchets, drills, grinders, sanders and
many more items.
During this period close co-operation with professional users has
been key to ongoing growth. It is on the basis of such growth
that Beta’s pneumatic tools can boast an excellent reliability/
performance ratio.
In order to satisfy market requirements in the best possible way,
Beta Utensili repairs the pneumatic tools in its Quality Department.
This process has allowed the company to improve its know-how
to a significant extent and become increasingly responsive to the
customer base.

www.beta-tools.com

254 

1921B1 Ø 1921N3 1922P3
baby reversible air ratchet 1/4” reversible ratchet reversible air impact ratchet
GAS
  • "Double rocking dog" impulse device
 

258 mm Ø  Ø
1/4” 1/4”
Free speed GAS 292 mm GAS
Max. torque
130 mm 350 rpm Bolt capacity 150 rpm Free speed 600 rpm
24 Nm Bolt capacity 68 Nm Maximum torque 136 Nm
Free speed Air inlet Bolt capacity Cl 8.8 M1218 mm
Max. torque Cl 8.8 M711 mm Working pressure Cl 8.8 M1016 mm Bolt capacity Cl 12.9 M1016 mm
Bolt capacity Cl 12.9 M610 mm Internal hose size (Ø) Cl 12.9 M813 mm Air inlet 1/4" GAS
Bolt capacity Mean air consumption Working pressure 6.2 bar
Air inlet 1/4" GAS Weight 1/4" GAS Internal hose size (Ø) 10 mm
Working pressure 6,2 bar 6,2 bar Mean air consumption 113 l/min
Internal hose size (Ø) 8 mm 10 mm Weight
Mean air consumption 68 l/min 1.5 kg
Weight 0,4 kg 140 l/min 
1,2 kg ” kg € 
342,00 1 019220013
  €  1/2 1,5
” kg 178,00 1 019210025
” € 
1/4 201,00 1 019210001 1/2 1,2

1921M1 1922P1 1924F
compact reversible air ratchet reversible air impact ratchet butterfly compact reversible impact wrench

 • "Double rocking dog" impulse device • "Double rocking dog" impulse device

​ 
Ø  Ø  Ø
1/4” 1/4” 1/4”
GAS 164 mm GAS 139 mm GAS

198 mm

Free speed 200 rpm Free speed 700 rpm Free speed 12,000 rpm
Max. torque 27 Nm Maximum torque 68 Nm Maximum torque 108 Nm
Bolt capacity Bolt capacity Bolt capacity
Bolt capacity Cl 8.8 M711 mm Bolt capacity Cl 8.8 M1016 mm Bolt capacity Cl 8.8 M1218 mm
Air inlet Cl 12.9 M610 mm Air inlet Cl 12.9 M813 mm Air inlet Cl 12.9 M1016 mm
Working pressure Working pressure Working pressure
Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) 1/4" GAS
Mean air consumption 6,2 bar Mean air consumption 6.2 bar Mean air consumption 6.2 bar
Weight 8 mm Weight 10 mm Weight 10 mm
96 l/min 88 l/min 59 l/min
0,6 kg  0.6 kg  0.5 kg
” kg " kg
 €  €  € 
” kg 178,00 1 019210005 1/4 0,6 215,00 1 019220006 3/8 0,5 200,00 1 019240025

1/4 0,6

1921M2 Ø 1922P2 Ø
compact reversible air ratchet 1/4” reversible air impact ratchet 1/4”
GAS GAS
 • "Double rocking dog" impulse device


198 mm 

164 mm

Free speed 200 rpm Free speed 700 rpm
Max. torque 27 Nm Maximum torque 68 Nm
Bolt capacity Bolt capacity
Bolt capacity Cl 8.8 M711 mm Bolt capacity Cl 8.8 M1016 mm
Air inlet Cl 12.9 M610 mm Air inlet Cl 12.9 M813 mm
Working pressure Working pressure
Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) 1/4" GAS
Mean air consumption 6,2 bar Mean air consumption 6.2 bar
Weight 8 mm Weight 10 mm
96 l/min 88 l/min
0,6 kg  0.6 kg
” kg
 €  € 
” kg 178,00 1 019210015 3/8 0,6 215,00 1 019220010

3/8 0,6

 255

1924B 1927CD 1927XM
compact reversible impact wrench compact reversible impact wrench
reversible impact wrench,
• "Pin Clutch" impulse device made from composite material • Single hammer impulse device

• Double hammer impulse device

 155 mm  191 mm  110 mm
 
 188
186 mm
198 mm
mm

Ø 1/4" GAS Ø 1/4” GAS Ø 1/4" GAS

Free speed 10,000 rpm Free speed 7,000 rpm Free speed 10,000 rpm
Max. torque 353 Nm Max. torque 1.020 Nm Max. torque 770 Nm
Bolt capacity Bolt capacity Cl 8.8 M2234 mm Bolt capacity
Bolt capacity Cl 8.8 M1624 mm Bolt capacity Cl 12.9 M1827 mm Bolt capacity Cl 8.8 M2234 mm
Air inlet Cl 12.9 M1421 mm Air inlet 1/4" GAS Air inlet Cl 12.9 M1827 mm
Working pressure Working pressure Operating pressure
Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 1/4" GAS
Mean air consumption 6,2 bar Mean air consumption 10 mm Mean air consumption 6,2 bar
Weight 8 mm Weight 130 l/min Weight 10 mm
80 l/min 1,9 kg
1,5 kg 122 l/min
1.3 kg

 €   €   € 
” kg 232,00 1 019240021 ” kg 368,00 1 019270007 ” kg 236,00 1 019270030

3/8 1,5 1/2 1,9 1/2 1,3

1924CD 1927P 1927A
reversible impact wrench
reversible impact wrench, reversible impact wrench, made from
made from composite material composite material • "Pin Clutch" impulse device

• Double hammer impulse device • Double hammer impulse device

 167 mm  191 mm  199 mm
  

167 186 205
mm mm mm

Ø 1/4” GAS

Free speed 10,000 rpm Free speed Ø 1/4” GAS Free speed Ø 1/4” GAS
Max. torque 410 Nm Max. torque Max. torque
Bolt capacity Bolt capacity 7,500 rpm Bolt capacity 7,000 rpm
Bolt capacity Cl 8.8 M1624 mm Bolt capacity 1.750 Nm Bolt capacity 610 Nm
Air inlet Cl 12.9 M1421 mm Air inlet Cl 8.8 M2436 mm Air inlet
Working pressure Operating pressure Cl 12.9 M2030 mm Operating pressure Cl 8.8 M2234 mm
Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) 1/4" GAS Internal hose size (Ø) Cl 12.9 M1827 mm
Mean air consumption 6,2 bar Mean air consumption Mean air consumption
Weight 8 mm Weight 6,2 bar Weight 1/4" GAS
79 l/min 10 mm 6,2 bar
 1,3 kg 290 l/min 10 mm
” kg
2 kg 160 l/min
3/8 1,3 2.7 kg
€   €  
256  319,00 1 019240007 ” kg 423,00 1 019270008 ” kg € 
199,00 1 019270002
1/2 2,0 1/2 2,7

1927AN 1928CD 1928DAL
Angle reversible impact wrench reversible impact wrench
reversible impact wrench,
• Single hammer impulse device made from composite material • Double hammer impulse device

 • Double hammer impulse device 
 
Ø  235 mm
72 1/4” 346 mm
mm GAS
6" (153 mm)
60 mm 350 mm 
Free speed
Max. torque 244 Nm 210 Max. torque
Bolt capacity 244 Nm mm Bolt capacity
Bolt capacity Cl 8.8 M1421 mm Bolt capacity
Air inlet Cl 12.9 M1219 mm Air inlet 212
Operating pressure 1/4" GAS Working pressure mm
Internal hose size (Ø) 6,2 bar Internal hose size (Ø)
Mean air consumption 10 mm Mean air consumption Ø 3/8” GAS
Weight Weight
Peso 2.1 kg 5,000 rpm
2,1 kg 1.695 Nm
Cl 8.8 M2741 mm
 €  Ø 3/8” GAS Cl 12.9 M2436 mm
” kg 419,00 1 019270012 3/8" GAS
4.500 rpm
1/2 2,1 1.800 Nm 6,2 bar
Cl 8.8 M2741 mm 10 mm
1927SP-AM Free speed Cl 12.9 M2436 mm 240 l/min
magnetic support for pneumatic impact wrench Max. torque 3/8" GAS 4,8 kg
Bolt capacity
• Fitted with two high-powered magnets with protective rubber Bolt capacity 6,2 bar
tops Air inlet 10 mm
• Can accommodate 1 1/2" impact wrench, 4 sockets and 1 Working pressure 215 l/min
torque wrench Internal hose size (Ø) 3,5 kg
• Capacity: 10 kg Mean air consumption
Weight

 €   € 
” kg 870,00 1 019280007 ” kg 718,00 1 019280023

3/4 3,5 3/4 4,8

1928DA 1928K4
reversible impact wrench assortment of one reversible impact wrench
and four impact sockets, long series
• Double hammer impulse device
• "Pin Clutch" impulse device


g € 
217 mm 
400 46,50 1 019270000 


212
mm

Free speed Ø 3/8” GAS  728L 27-30-32-36 mm 4,000 rpm
Max. torque 1.493 Nm
Bolt capacity 5,000 rpm Free speed Cl 8.8 M2741 mm
Bolt capacity 1.695 Nm Max. torque Cl 12.9 M2436 mm
Air inlet Cl 8.8 M2741 mm Bolt capacity 3/8" GAS
Working pressure Cl 12.9 M2436 mm Bolt capacity
Internal hose size (Ø) 3/8" GAS Air inlet 6,2 bar
Mean air consumption Working pressure 10 mm
Weight 6,2 bar Internal hose size (Ø) 260 l/min
10 mm Mean air consumption 5,2 kg
 240 l/min Impact wrench weight
” kg 4,3 kg
 € 
3/4 4,3 €  ” kg 690,00 1 019280104
678,00 1 019280022
3/4 9,3  257

 410x330x106 mm

1930CD 1930PA 1930A
reversible impact wrench reversible impact wrench
reversible impact wrench,
made from composite material • Double hammer impulse device • Double hammer impulse device

• Double hammer impulse device

 250 mm  
 300 mm 
 380 mm
270
260 mm 198
mm mm

Ø 1/2” GAS

Ø 1/2” GAS Ø 1/2” GAS

Free speed 4,000 rpm Free speed 3,500 rpm Free speed 4,000 rpm
Max. torque 2.445 Nm Max. torque 2.445 Nm Max. torque 2.445 Nm
Bolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M3655 mm
Bolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3046 mm
Air inlet 1/2" GAS Air inlet 1/2" GAS Air inlet 1/2" GAS
Working pressure Operating pressure Working pressure
Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 6,2 bar
Mean air consumption 13 mm Mean air consumption 13 mm Mean air consumption 13 mm
Weight 320 l/min Weight 350 l/min Weight 460 l/min
7,1 kg 9.6 kg 9.5 kg

 €   €   € 
” kg 1.125,00 1 019300022 ” kg 1.010,00 1 019300032 ” kg 1.020,00 1 019300036

1 7,1 1 9,6 1 9,5

1930NCD 1930LA 1930HLA
reversible impact wrench reversible impact wrench
reversible impact wrench,
made from composite material • Double hammer impulse device • Double hammer impulse device

• Double hammer impulse device

  
  

538 mm 536 mm 628 mm

7" (178 mm) 181 198 9" (230 mm) 180
mm mm mm
8" (203 mm)
Ø 1/2” GAS Ø 1/2” GAS Ø 1/2” GAS

Free speed 4,000 rpm Free speed 4,000 rpm Free speed 3,000 rpm
Max. torque 2.445 Nm Max. torque 2.445 Nm Max. torque 3.661 Nm
Bolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M4265 mm
Bolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3350 mm
Air inlet 1/2" GAS Air inlet 1/2" GAS Air inlet 1/2" GAS
Working pressure Working pressure Working pressure
Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 6,2 bar
Mean air consumption 13 mm Mean air consumption 13 mm Mean air consumption 13 mm
Weight 320 l/min Weight 460 l/min Weight 460 l/min
8,8 kg 10,6 kg 16,4 kg

” kg €   €   € 
1.180,00 1 019300027 ” kg 1.055,00 1 019300037 ” kg 1.485,00 1 019300040
1 8,8
1 10,6 1 16,4
258 

1930ZL 1931CD10 1931AN10
reversible impact wrench reversible angle drill
reversible drill,
• Double hammer impulse device made from composite material

​  182 mm 
  

475 mm 180 212 mm
mm
145 Ø
Ø 1/2” GAS mm 1/4”
GAS
97
mm

Free speed 3,000 rpm Free speed Ø 1/4” Free speed 1,400 rpm
Max. torque 4.068 Nm Chuck capacity GAS Chuck capacity 1÷10 mm
Bolt capacity Cl 8.8 M4265 mm Power Power 0,38 kW
Bolt capacity Cl 12.9 M3655 mm Spindle thread 1,800 rpm Spindle thread 3/8” - 24UNF
Air inlet 1/2" GAS Air inlet 1÷10 mm Air inlet 1/4" GAS
Working pressure Working pressure 0,38 kW Working pressure
Internal hose size (Ø) 6,2 bar Internal hose size (Ø) 3/8” - 24UNF Internal hose size (Ø) 6,2 bar
Mean air consumption 13 mm Mean air consumption 1/4" GAS Mean air consumption 10 mm
Weight 480 l/min Weight Weight 150 l/min
6,2 bar 1,1 kg
15 kg 10 mm
170 l/min € 
213,00 1 019310030
1 kg

  €   €  
” kg 1.875,00 1 019300070 kg 192,00 1 019310010 kg

1 1/2 15 1,0 1,1

1931CD6 1931CD13 1932B10
reversible drill
reversible drill, reversible drill,
made from composite material made from composite material

 153 mm   190 mm
  226 mm 

137 145
mm mm

140
mm

Free speed Ø 1/4” Free speed Ø 1/4” GAS Free speed Ø 1/4” GAS
Chuck capacity GAS Chuck capacity Chuck capacity
Power Power 800 rpm Power 1,800 rpm
Spindle thread 2,600 rpm Spindle thread 1,5÷13 mm Spindle thread 1÷10 mm
Air inlet 1÷6 mm Air inlet Air inlet 0,23 kW
Working pressure 0,23 kW Working pressure 0,38 kW Working pressure 3/8” - 24UNF
Internal hose size (Ø) Internal hose size (Ø) 1/2” - 20UNC Internal hose size (Ø) 1/4" GAS
Mean air consumption 3/8” - 24UNF Mean air consumption Mean air consumption
Weight 1/4" GAS Weight 1/4" GAS Weight 6,2 bar
6,2 bar 6,2 bar 10 mm
 8 mm 10 mm 160 l/min
kg 130 l/min 1,2 kg
0,6 kg 170 l/min
0,6 1,3 kg € 
153,00 1 019320040
€   €  
213,00 1 019310006 kg 284,00 1 019310013 kg  259

1,3 1,2

1932RS13 1933 1933IL
reversible drill die grinder long spindle die grinder

 • Collect chuck, Ø 3 mm and 6 mm • Collect chuck, Ø 3 mm and 6 mm
 223 mm
 

Ø 38,5 195 mm Ø 45,1
1/4” mm 1/4” mm
GAS 340 mm GAS

159 mm

Free speed 25,000 rpm Free speed 20,000 rpm
3 - 6 mm Chuck capacity 3 - 6 mm
Chuck capacity 0,20 kW Power 0,38 kW
1/4" GAS Air inlet 1/4" GAS
Power 6,2 bar Working pressure 6,2 bar
10 mm Internal hose size (Ø) 10 mm
140 Air inlet 230 l/min Mean air consumption 113 l/min
mm Working pressure 380 g Weight 1,4 kg

Internal hose size (Ø)

Mean air consumption

Weight

Ø 1/4” GAS  

750 rpm g €  kg €  
1,5÷13 mm 380 113,00 1 019330001 1,4 174,00 1 019330010

Free speed 0,23 kW 1933I Ø 45,1 1933AN90 G1Ø/A4S” 3m8m,5
Chuck capacity 3/8" - 24UNF die grinder 1/4” mm angle grinder
Power GAS
Spindle thread 1/4" GAS • Collect chuck, Ø 3 mm and 6 mm • Collect chuck, Ø 3 mm and 6 mm
Air inlet 6,2 bar
Working pressure 10 mm  
Internal hose size (Ø)
Mean air consumption 160 l/min 182 mm 72,25
Weight 1,4 kg mm
Free speed
 €  Chuck capacity
kg 195,00 1 019320043 Power
Air inlet
1,4 Working pressure 20,000 rpm 163 mm 20,000 rpm
Internal hose size (Ø) 3 - 6 mm 3 - 6 mm
1932B13 Mean air consumption 0,38 kW Free speed 0,20 kW
reversible drill Weight 1/4" GAS Chuck capacity 1/4" GAS
6,2 bar Power 6,2 bar
10 mm Air inlet 10 mm
260 l/min Working pressure 230 l/min
670 g Internal hose size (Ø) 510 g
Mean air consumption
Weight

 € 
€ 
 g g 144,00 1 019330020
 670 128,00 1 019330005 510

220 mm 150 1933L 1934BV
mm long spindle die grinder low-speed tyre buffer
Free speed
Chuck capacity Ø 1/4” GAS • Collect chuck, Ø 3 mm and 6 mm • Collect chuck, Ø 3 mm and 6 mm
Power
Spindle thread  
Air inlet
Operating pressure 117 mm Ø 45
Internal hose size (Ø) 1/4" mm
Mean air consumption Ø GAS
Peso 1/4” 38,3
GAS mm

255 mm 211 mm

400 rpm Free speed 25,000 rpm Free speed 3,700 rpm
1,5÷13 mm Chuck capacity 3 - 6 mm Chuck capacity 3 - 6 mm
Power 0,20 kW Power 0,37 kW
0,34 kW Air inlet 1/4" GAS Air inlet 1/4" GAS
1/2" - 20UNC Working pressure 6,2 bar Operating pressure 6,2 bar
Internal hose size (Ø) 10 mm Internal hose size (Ø) 10 mm
1/4" GAS Mean air consumption 270 l/min Mean air consumption 113 l/min
6,2 bar Weight 670 g Weight 0.84 kg
10 mm

180 l/min
1,6 kg

1,6 €   €   € 
223,00 1 019320004 g 144,00 1 019330015 g 154,00 1 019340000
260 
670 840

1934MAV 1935F 1936/5A
micro die grinder reversible air screwdriver angle grinder



238 mm

Ø125 Ø 1/4”
GAS


 95
mm
206 mm

4-16 Nm 135
mm
150 mm 14 mm Free speed Free speed 10,000 rpm
Torque range Ø 1/4” GAS Grinding disc size 125 mm
Free speed 56,000 rpm Screw capacity Power 0,66 kW
Chuck capacity 3 mm Bit holder 800 rpm Spindle thread M14
Power Air inlet 4-16 Nm Air inlet
Air inlet 0,04 kW Working pressure Working pressure 1/4" GAS
Operating pressure 1/4" GAS Internal hose size (Ø) 6-9 M Ø internal hose size 6,2 bar
Internal hose size (Ø) Mean air consumption  1/4” Mean air consumption 10 mm
Mean air consumption 6,2 bar Weight 1/4" GAS Weight
Weight 4,5 mm 6,2 bar 390 l/min
115 l/min 10 mm  1,9 kg
0.2 kg 150 l/min kg
1,3 kg € 
1,9 350,00 1 019360025


€  € 
g 135,00 1 019340010 kg 215,00 1 019350045 1936/5
205 1,3 angle grinder

1934MAV70 1936/4A  260 mm
high-speed micro die grinder angle grinder
Ø125
Ø 1/4”
GAS

95
mm

 150 mm  238 mm

17 mm Ø115 Ø 1/4”
GAS
95
mm Free speed 10,500 rpm
Grinding disc size 125 mm
Free speed 11,000 rpm Power 0,7 kW
Grinding disc size 115 mm Spindle thread M14
Power 0,66 kW Air inlet
Spindle thread M14 Working pressure 1/4" GAS
Air inlet Ø internal hose size 6,2 bar
Operating pressure 1/4" GAS Mean air consumption 10 mm
Internal hose size (Ø) 6,2 bar Weight
Mean air consumption 10 mm 380 l/min
Weight  2 kg
390 l/min kg
1.77 kg € 
2,0 509,00 1 019360005

Free speed 70,000 rpm
Chuck capacity 3 mm
Power
Air inlet 0,08 kW
Operating pressure 1/4" GAS
Internal hose size (Ø)
Mean air consumption 6,2 bar
Weight 4,5 mm
115 l/min
0.21 kg

 €   € 
g 224,00 1 019340030 kg 350,00 1 019360024

210 1,8

 261

1936/7 1937KC
angle grinder mini orbital sander

 317 mm • Orbit diameter 4 mm
• 2 sanding pads (Ø 50 mm and Ø 75 mm)
Ø178 • 10 abrasive paper discs (Ø 50 mm), grain 400, 600, 800
• 10 abrasive paper discs (Ø 75 mm), grain 400, 600, 800
105
mm 

Ø 3/8”
GAS

1937KL
mini polisher

• Sanding pad (Ø 75 mm)
• 2 polishing sponges (Ø 90 mm) - 1937/KL-DSB, 1937/KL-DSG
• Lambswool pad (Ø 90 mm) - 1937/KL-DLA



Free speed 7,000 rpm Free speed 15000 Free speed 3,200 rpm
Grinding disc size 178 mm Power ​0.25 Power 0.25 kW
Power 1,4 kW Pad size Pad size 75 mm
Spindle thread M14 Spindle thread ​50 - 75 Spindle thread M6
Air inlet Air inlet M6 x 1.0 Air inlet
Working pressure 3/8" GAS Operating pressure Operating pressure 1/4" GAS
Ø internal hose size 6,2 bar Internal hose size (Ø) 1​ /4" Internal hose size (Ø) 6.2 bar
Mean air consumption 13 mm Mean air consumption ​6.2 bar Mean air consumption 10 mm
Weight Polisher weight Polisher weight 91 l/min
500 l/min Kit weight 1​ 0 Kit weight 0.75 kg
 3,6 kg 79 1.8 kg
kg  0​ .64 
€  kg 1​ .4 kg € 
3,6 730,00 1 019360007 233,00 1 019370161
1,4 €  1,8
213,00 1 019370171

1937 1937C...
​Roto-orbital palm sander, lubrication free, Abrasive paper discs for item 1937KC
made from composite material

• Orbit diameter: 5 mm

 230 mm Ø

Ø 1/4”

GAS

100 mm Ø €  1937KL-D
mm P 12,00 1 019370175 accessories for item 1937KL
12,00 1 019370176
50 400 12,00 1 019370177 1937KL-DLA
50 600 15,50 1 019370178 Ø
50 800 15,50 1 019370179
75 400 15,50 1 019370180 1937KL-DSB
75 600
75 800 1937KL-DSG

*​ Prices refer to 10 pieces

Free speed 12,000 rpm 1937KL-DLA Ø € 
Power 0,18 kW 1937KL-DSB mm 20,50 1 019370164
Pad size 1​ 50 mm 1937KL-DSG 20,50 1 019370165
Orbit diameter 5 mm 90 20,50 1 019370166
Spindle thread 5/16"-24 90
Air inlet 1/4" GAS 90
Operating pressure 6,2 bar
Internal hose size (Ø) 10 mm 1937K...
Mean air consumption Pads for items 1937KC and 1937KL
Weight 170 l/min
0,86 kg

 Ø

kg €  
0,86 379,00 1 019370001

1937R/P
6-hole p​ ad, Ø 150 mm,
for item 1937

1937R/P €  Ø € 
39,00 1 019370002 mm 1937KC 1937KL 22,50 1 019370173
262  27,50 1 019370163
1937KC-RP 50 ●
1937KL-RP 75 ● ●

1937RT 1937M 1937N10
orbital palm sander, made from composite multi-use sander pneumatic belt sander
material, with suction system with 16 accessories

• Orbit diameter 5 mm 
• Rectangular pad (100x110 mm) 150 mm

​• Delta pad (125x95 mm) Ø 1/4 GAS
170 mm (▲ 195 mm)

Ø 1/4”
GAS

100
mm

Ø 1/4” GAS

Free speed ​10,000 rpm Free speed 3,500 rpm Free speed 20,000 rpm
Orbit diameter 5 mm Power 0,34 kW Power 0,37 kW
Air inlet Air inlet Belt size
Operating pressure ​1/4" GAS Working pressure 1/4" GAS Air inlet 10x330 mm
Internal hose size (Ø) 6.2 bar Internal hose size (Ø) 6,2 bar Working pressure 1/4" GAS
Mean air consumption 1​ 0 mm Mean air consumption 10 mm Internal hose size (Ø) 6,2 bar
Weight Sander weight Mean air consumption 10 mm
Peso 180 l/min Kit weight 113 l/min Weight 374 l/min
0.9 kg 1,5 kg 0,9 kg
0,9 kg  4,5 kg 
kg kg
 €  € 
4,5 630,00 1 019370011 0,9 248,00 1 019370041
kg €    458x495x116 mm
0,9 385,00 1 019370021 1937N10-GR
1937M-01÷11 ​sand belts for item 1937N10
1937RT/R accessories for item 1937M
​rectangular pad for item 1937RT

L

L1

L L1 €  1937N10-GR60 P € 
mm mm 29,50 1 019370022 1937N10-GR80 25,50 1 019370146
1937N10-GR100 60 25,50 1 019370148
1937RT/R 110 100 1937N10-GR120 80 25,50 1 019370150
100 25,50 1 019370152
1937RT/T 120
Delta pad for item 1937RT
The prices shown are for 10 pieces

L 1937N20
pneumatic belt sander



L L1 L1 160 mm
mm mm
€ 
1937RT/T 125 95 28,00 1 019370023

L €  Free speed Ø 1/4” GAS
mm 1937M- 23,50 1 019370101 Power
23,50 1 019370102 Belt size 16,000 rpm
1937M-01 30 20,50 1 019370103 Air inlet 0,45 kW
1937M-02 30 20,50 1 019370104 Working pressure
1937M-03 11 20,50 1 019370105 Internal hose size (Ø) 20x520 mm
1937M-04 23 20,50 1 019370106 Mean air consumption 1/4" GAS
1937M-05 11 58,00 1 019370107 Weight 6,2 bar
1937M-06 23 20,50 1 019370108 10 mm
* 1937M-07 16 20,50 1 019370109  400 l/min
1937M-08 13 07 20,50 1 019370110 kg 1,6 kg
1937M-09 26 07 20,50 1 019370111
1937M-10 11 03, 05 1,6 € 
1937M-11 23 01, 02, 288,00 1 019370051

04, 06  263

* The prices shown are for 6 pieces

1937N20-GR 1940 1940E10
sand belts for item 1937N20 air hammer air hammer

 216 mm • Compatible with chisels with 10-mm hexagon drive

 266 mm
1937N20-GR60 P € 
1937N20-GR80 33,00 1 019370156 148
1937N20-GR100 60 33,00 1 019370158 mm 175
1937N20-GR120 80 33,00 1 019370160
100 33,00 1 019370162 mm
120

The prices shown are for 10 pieces

1938 Ø 1/4 GAS
Windscreen remover
Ø 1/4 GAS
• Supplied with 1 57 mm straight blade
80 Strokes per minute 3,500 Strokes per minute 2.900
 185 mm mm Chisel inlet  11 mm Chisel inlet  10 mm
Piston size Piston size
Ø Piston stroke 19 mm Piston stroke 19 mm
1/4" Air inlet 67 mm Air inlet 67 mm
GAS Working pressure 1/4" GAS Operating pressure 1/4" GAS
Ø internal hose size 6,2 bar Internal hose size (Ø) 6,2 bar
Mean air consumption 8 mm Mean air consumption 10 mm
Weight 240 l/min Weight 76 l/min
1,9 kg 1.7 kg
 
kg €  kg € 
158,00 1 019400001 172,00 1 019400010
1,9 1,7

​Oscillations/minute 2​ 0,000 1940MT 1940E10/MT
Air inlet 1/4" GAS spare retainer spring for item 1940 spare retainer spring for item 1940E10
Operating pressure
Internal hose size (Ø) 6,2 bar
Mean air consumption 6​ ,5 mm
Weight 200 l/min
1,0 kg

kg € 
195,00 1 019380021
1,0

1938R/L 1940MT €  € 
blades for windscreen removers 10,00 5 019400110 1,30 5 019400112

1940E10/MT

1940S... 1940E10/S...
chisels for air hammers 1940E10
chisels for air hammers
item 1940

175 mm 175 mm

R/L2 SN  SN 
R/L1 11 mm
L L 10 mm
R/L5 ST ST
R/L3 R/L4 L
L SD SD
SPS SPS
L
SDT SDT

1940SN €  1940E10/SN € 
1940ST 12,50 5 019400020 1940E10/ST 8,50 5 019400040
1940SD 12,50 5 019400021 1940E10/SD 8,50 5 019400041
1940SPS 12,50 5 019400022 1940E10/SPS 8,50 5 019400042
1940SDT 12,50 5 019400023 1940E10/SDT 8,50 5 019400043
12,50 5 019400024 8,50 5 019400044

1938R/L1 L €  1940/S5 1940E10/S5
1938R/L2 mm 16,00 1 019380041
1938R/L3 30,50 1 019380042 set of 5 chisels for air hammers set of 5 chisels
1938R/L4 57 18,00 1 019380043 item 1940 for air hammers 1940E10
1938R/L5 90 26,00 1 019380044
50 30,00 1 019380045
16
36

1938R/S5
set of 5 blades for item 1938

1938R/S5 €  1940/S5 €  1940E10/S5 € 
120,50 1 019380055 57,00 1 019400030 42,50 1 019400050
264 

1942A 1944N 313 mm
air saw needle scaler

 

180 mm 46
mm

48 L=225 mm Ø 1/4”
mm GAS
10.000
Strokes per minute 10 mm Strokes per minute ​3800 1945S
Stroke length 1/4" GAS Stroke length 33 mm ​stapler
Air inlet 6,2 bar N°. of needles
Operating pressure 8 mm Needle size (Ø) 19 • Uses staples type 80, section 0.95 x 0.65 mm (21-Gauge),
Internal hose size (Ø) 75 l/min Air inlet 3​ mm   length: 4​ - 16 mm; width: 12.8 mm
Mean air consumption 550 g Working pressure 1/4" GAS
Weight Internal hose size (Ø) 6.2 bar  44 217 mm
€  Mean air consumption 8 mm mm
 263,00 1 019420000 Weight 85 l/min
g 2.7 kg Ø
 1/4”
550 kg €  GAS
379,00 1 019440002
1942LR 2,7 160
Bimetal blades mm
for air saw 1942A
1944AR

set of needles
for needle scalers 1944N and 1944A

90 mm Magazine capacity ​157 pcs
n. 32x1” Air inlet 1​ /4" GAS
Working pressure 5 - 7 bar
Internal hose size (Ø)
Air consumption (7 bar) 8​ mm
Weight ​1.12 l/cycle

​0.87 kg



kg €  
0,9 160,00 1 019450000

1942LR €  Ø 1945C
6,00 5 019420032 mm n. stapler, nailer, combo tool
1944A
axial needle scaler 1944AR 2 2 29 €  • Uses staples type 90, section 1.25 x 1.0 mm (18-Gauge),
1944AR 3 3 19 39,00 1 019440015   length: 1​ 6 - 40 mm; width: 5.8 mm
 30,00 1 019440005 • Uses round-headed nails type B12, section 1.25 x 1.0 mm
(18-Gauge), 1.9-mm head
1944PA
​needle plates for items 1944N and 1944A  54 248 mm
mm
N.

375 mm Ø Ø
Ø 1/4”
1/4” € GAS
GAS 43,00
32,00 257
Ø mm
mm N.

1944PA 2 2 29 1 019440016
1944PA 3 3 19 1 019440006

Strokes per minute 3.800 Magazine capacity 100 pcs
Stroke length 33 mm Air inlet ​1/4" GAS
N°. of needles Working pressure 5 - 8 bar
Needle size (Ø) 19 Internal hose size (Ø)
Air inlet 3 mm Air consumption (7 bar) 8​ mm
Working pressure 1/4" GAS Weight ​1.12 l/cycle
Internal hose size (Ø) 6.2 bar
Mean air consumption 10 mm  1.16 kg
Weight 85 l/min kg
2.8 kg € 
 1,16 210,00 1 019450200
kg € 
298,00 1 019440011  265
2,8

1945P 1946C4,8 1946KF
headless pinner riveter air riveter for threaded inserts

• Uses pins type B6, Ø 0.64 mm (23-Gauge), • Automatic suction • Supplied assembled for threaded rivets made of steel,
  length: 12 - 35 mm • Supplied assembled for use with 2.4 - 3.2 - 4.0 - 4.8 mm long stainless steel, aluminium and copper, M4, M5, M6, M8
steel, stainless steel, aluminium and copper rivets
 260 mm
 290 mm

 46 199 mm
mm

Ø 245 270
1/4” mm mm
GAS
Ø 1/4”
173 GAS
mm
Traction power
Magazine capacity 145 pcs Ø 1/4” 8,900 N Stroke length 14,235 N
Air inlet 1​ /4" GAS GAS 15 mm Maximum rivet capacity 7 mm
Working pressure 4 - 7 bar Stainless steel Ø 4.8 mm Air inlet
Internal hose size (Ø) Traction power 1/4" GAS Operating pressure Stainless steel Ø, M8
Air consumption (7 bar) 8​ mm Stroke length 6,2 bar Internal hose size (Ø) 1/4" GAS
Weight 0​ .27 l/cycle Maximum rivet capacity 10 mm Air consumption 6,2 bar
Air inlet 2.6 l/cycle Air riveter weight 10 mm
0.87 kg Operating pressure 1.5 kg Kit weight 2.1 l/cycle
Internal hose size (Ø) 2.1 kg
Air consumption 3.4 kg
Weight

  

kg €   kg €   kg €  
0,87 258,00 1 019450100 1,5 495,00 1 019460006 3,4 1.640,00 1 019460012

1946T 1946C7,8 1946KF/M...
air riveter riveter spare pins for item 1946KF

• supplied with interchangeable nozzles for steel, stainless • Automatic suction
steel, aluminium and copper rivets, 2.4 -3.2 - 4.0 - 4.8 mm long • Supplied assembled for use with 4.8 - 5.6 - 6.4 - 7.8 mm long
steel, stainless steel, aluminium and copper rivets
 272 mm
 305 mm

290 1946KF/M4 € 
mm 1946KF/M5 53,50 1 019460124
1946KF/M6 53,50 1 019460125
285 Ø 1/4” 1946KF/M8 53,50 1 019460126
mm GAS 53,50 1 019460128
1947
Ø 1/4” 9,000 N Traction power 16,900 N bonding gun 275 mm
GAS ​16 mm Stroke length 22.5 mm
Stainless steel Ø 4.8 mm Maximum rivet capacity Stainless steel Ø 7.8 mm 
Traction power 1/4" GAS Air inlet 1/4" GAS
Stroke length 6,2 bar Operating pressure 60
Maximum rivet capacity 8 mm Internal hose size (Ø) 6,2 bar mm
Air inlet 2.0 l/cycle Air consumption 10 mm
Working pressure 1.7 kg Weight 4.9 l/cycle Tube size
Internal hose size (Ø) 1.8 kg Cartridge capacity
Air consumption €   Air inlet
Weight 230,00 1 019460021 kg €  Working pressure
785,00 1 019460008 Internal hose size (Ø)
 1,8 Mean air consumption
kg Weight
1946C/T... Ø 1/4”
1,7 heads for structural rivets  GAS
kg
266  Ø ​5​ 0x210 mm
1,1 350 ml
1946C/T4,8 Ø € 
1946C/T6,4 mm 30,00 1 019460016 1/4" GAS
30,00 1 019460018 4,8 bar
4,8 ​10 mm
6,4
​120 l/min
1,1 kg

€ 
54,00 1 019470001

1947H 268 mm 1947M 1948PR
bonding gun g​ un for single-component sealants
spare tungsten carbide bit
 250 mm for item 1948
61
mm • Maximum hardness: 60 HRC

1948PR € 
99,00 1 019480005

Ø 1/4”GAS Ø 1/4” GAS 1949BC
progressive blow gun with rubber nozzle
Tube size 210x50 mm Tube dimensions 210x50 mm
Cartridge capacity 300/310 ml Cartridge capacity 310 ml • Hard-wearing, shockproof composite material body
Air inlet Air inlet • Replaceable scratchproof rubber nozzle
Operating pressure 1/4" GAS Working pressure 1/4" GAS
Internal hose size (Ø) 4 ÷ 8 bar Nozzle Ø 3 ÷ 5 bar 30 mm
Mean air consumption Mean air consumption 1.6 - 2.5 mm 120 mm
Weight 2,5 mm Weight 250 l/min
120 l/min 160
  1.2 kg mm
g 750 g kg
€ 
750 €  1,2 270,00 1 019470021
196,00 1 019470011

1947G 1947M -...
grease gun spare nozzles for item 1947M

​Die-cast aluminium head 1947M-T Aluminium threaded insert Ø 1/4" GAS
Ergonomic grip for ease of access to tough greasing points 1947M-P Operating pressure
Corrosion-resistant brass valve 1947M-ST Maximum operating pressure 1/4" GAS
Takes 400 g cartridges or bulk grease up to 500 cc Mean air consumption 6-8 bar
Tube size: 54 (interior) x 260 mm Operating temperature 15 bar
Air inlet: 1/4" GAS Weight 87 l/min
Operating pressure: 4÷10 bar
Weight:1.9 kg -20°C ÷ 70°C
120 g



g € 
120 14,50 1 019490022

1947M-ST €  1949BC/RU
1947M-T 2,50 10 019470025 5 rubber nozzles for item 1949BC
1947M-P 1,50 10 019470026
2,00 10 019470027

* Stated prices are for 10 pieces

260
mm 1/4"

GAS 1948

engraving pen € 
18,50 1 019490122
 1949BC/RU

54 mm

Ø 1/4” L=1,5 m
GAS

1947G € 
136,00 1 019470051

170 mm

14
mm

Strokes per minute 3500 ÷ 3800
Maximum hardness 60 HRC
Air inlet
Operating pressure 1/4" GAS
Mean air consumption 6,2 bar
Weight
50 l/min
 150 g
g
€ 
150 255,00 1 019480001

 267

1949T 1949G 1949GPE
telescopic progressive blow gun
progressive blow gun tyre inflator
• Hard-wearing, shockproof composite material body with air regulator
• Telescopic steel swivel tube: 165 mm ÷ 300 mm • Operating pressure: 0÷11 bars (10÷160 psi)
• Made from hard-wearing, shockproof, scratchproof, • Pressure release feature
thermally insulated composite plastic material • Pressure measurement feature
• The special valve and the lever allow the circuit to be • Gauge coated with schockproof rubber
progressively opened, thus optimizing air flow • 360 degree hose rotation

125 mm

104 120 L=300mm
mm mm

100mm

165÷300 mm 150 Ø 1/4” GAS 145 mm
mm Ø 1/4" GAS
1/4" GAS
Ø 1/4" Brass threaded insert 6-8 bar
GAS Operating pressure 10 bar
Maximum operating pressure
Operating temperature - 15 °C ÷ 70 °C
Weight 140 g

Aluminium threaded insert 1/4" GAS  bar  € 
Operating pressure 6÷8 bar g 108,00 1 019490008
Maximum operating pressure 15 bar g € 
Mean air consumption 144 l/min 140 13,90 5 019490035 1949GPE 0÷11 640
Operating temperature
Weight -20°C ÷ 70°C
190 g

 1949DGT 1949GPN
digital tyre inflator
g €  tyre inflator,
190 23,70 1 019490040 • Operating pressure: 0÷11 bar ABS housing
(2.0÷160 psi)
1949F • 4 units of measurement: psi/bar/kgcm2/kpa • CE certified pressure gauge with scale 0.7÷12 bars
progressive blow gun • Backlit LCD display (graduation: 1/10 bars)
• Reset feature • Two servo-controlled buttons allow accurate, quick tyre
• Made from hard-wearing, shockproof, scratchproof, • Self-power off after 3 min. inflating (+) and deflating (-)
thermally insulated composite plastic material • Pressure release button • Supplied with a calibration certificate
• The special valve and the lever allow the circuit to be • Resolution: 0.05 bar • Fitted with a shockproof, protective shell and an eyelet
progressively opened, thus optimizing air flow • ABS housing, protective rubber shell • Fitted with a 1/4" GAS threaded coupler
on gauge, shockproof, nonslip handle grip • Swivel air inlet for rubber hose, Ø 7 mm
• Power supply: 2 AAA size 1.5V batteries
• Compatible with coupling 1916G 1/4"  

L=530 mm 245
mm

Ø
4 mm

L=1500 mm

230 mm

172 mm  € 
bar g 221,50 1 019490011
100
mm 125 Ø 1/4" GAS 1949GPN 0,7÷12 810
mm
€  1949M
 136,00 1 019490020 ​tyre pressure tester
bar g

1949DGT 0-11 500

L=350mm

Ø 1/4" GAS

Brass threaded insert 1/4" GAS 60
Operating pressure 6-8 bar mm
Maximum operating pressure 10 bar
Operating temperature  € 
Weight -15°C ÷ 70°C bar​ psi g 61,00 1 019490400
130 g
 1949M 0÷4 5÷60 280
g € 
13,40 5 019490027
130

268 

1951 1910/8 - 1910/10 1915C
cleaning gun automatic hose reel, polyurethane recoil hoses, 95 Shore,
aluminium body, extandable up to 12 m
• For cleaning car upholstery, carpeting, seats and boots for compressed air or cold water
• Maximum operating pressure: 10 bar
• Max. operating pressure: 15 bar
319 mm
A
125 D
mm B Ø

L D1
D
Ø 1/4” GAS
D1
D1xD Ø GAS €
D1xD L A B ØGAS mm BSP 41,00 
51,00 1 019150014
mm m mm mm mm 6,5x10 1/4" 84,00 1 019150015
8x12 1/4" 1 019150016
11x16 3/8"

Free speed 3,600 rpm 8x12 9+1 375 130 1/4"
Tank capacity 1L
Air inlet 1910/8 €  1915C/L
Working pressure 1​ /4" GAS 342,00 1 019100008 polyurethane recoil hoses, 95 Shore,
Internal hose size (Ø) 6,2 bar extendable up to 15 m
Mean air consumption 8 mm D1xD L A B ØGAS
Weight • Maximum operating pressure: 10 bar
110 l/min mm m mm mm mm
​650 g

10x14 15+1 490 160 3/8"

 1910/10 € 
508,00 1 019100010
g € 
650 119,00 1 019510051 1914 D
Ø D1
1901BM/8 polyurethane recoiled hoses, 98 Shore,
automatic hose reel extandable
shock-proof plastic body
for compressed air or cold water • Maximum operating pressure: 12 bar

• Max. operating pressure: 12 bar D1xD Ø GAS € 
mm BSP 66,50 1 019150115
110,00 1 019150116
8x12 1/4"
11x16 3/8"

 370 mm D
Ø
L 305 1915D
D mm D1
D1 braided polyurethane hose, 95 Shore, 9
metres long

• Maximum operating pressure: 15 bar

L D1xD Ø GAS € 
20,00 1 019140054
m mm BSP 23,30 1 019140056
4 5x8 1/4" 30,50 1 019140060

6 5x8 1/4"

10 5x8 1/4" D
D1
Ø 1/4" GAS

D1xD L Ø GAS €  1915B Ø
mm m BSP 219,00 1 019010111 polyurethane recoil hoses, 95 Shore,
extendable up to 9 m
8x12 9+1 1/4"
• Maximum operating pressure: 10 bar
D1xD Ø GAS
1901T/10 mm BSP € 
41,50 1 019150017
automatic hose reel, 8x12 1/4" 66,50 1 019150018
shock-proof plastic body, 11x16 3/8"
for compressed air or cold water
D 1915E
• Max. operating pressure: 15 bar Ø
braided polyurethane hose, 95 Shore,
 445 mm D1 12 metres long

L D1xD Ø GAS • Maximum operating pressure: 15 bar
mm BSP
160 € 
mm 6,5x10 1/4" 35,00 1 019150011
8x12 1/4" 41,00 1 019150012
11x16 3/8" 68,00 1 019150013 D
D1
D

D1

Ø 3/8"GAS Ø

D1xD L Ø GAS €  D1xD Ø GAS € 
260,00 1 019010210 mm BSP 55,00 1 019150019
mm m BSP 83,00 1 019150020
​10x14 15+1 3/8" 8x12 1/4"
11x16 3/8"

 269

1915E/XL 1916JF 1917JF
braided polyurethane coils, 95 Shore, quick couplings, European profile, ball quick couplers, Asian profile,
50 m long female threaded, cylindrical (BSP) female threaded, cylindrical (BSP)

• Maximum operating pressure: 15 bar Ø Ø

D ​Ø GAS €  Ø GAS € 
BSPT 4,55 1 019160456 BSP 20,00 1 019170456
D1 4,75 1 019160460 21,00 1 019170460
1/4" 1/4"
3/8" 3/8"

D1xD Ø GAS €  1916R 1917RG
mm BSP 190,00 1 019150519 rotary universal coupler
318,00 1 019150520 quick couplings, European profile,
8x12 1/4" hose tail fitting, tapered (BSPT) • Made of aluminium, female threaded, cylindrical (BSP)
11x16 3/8"   male threaded, cylindrical (BSP)
• Matches all couplings with Italian and European profiles
• Rotates freely, even without connected area

1916I D1

quick couplings Italian profile D1 €  Ø 1/4"
male threaded, cylindrical (BSP) mm GAS

6 1,80 5 019160106 Ø GAS
BSP
8 2,00 5 019160108 Ø 1/4" GAS
1/4"
11 2,10 5 019160111 € 
19,00 1 019170252
Ø

Ø GAS €  1917M 1918
BSP 2,70 5 019160001 universal ball quick couplers, hose tail fitting, male threaded
3,10 5 019160002 shockproof rubber,
1/4" male threaded, cylindrical (BSP)
3/8"
• Designed for couplings 1916I and 1916G

1916G Ø

quick couplings European profile D1 Ø
male threaded, tapered (BSPT)

Ø Ø GAS € 
BSP 11,00 5 019170001
11,00 5 019170003 D1 Ø GAS
1/4" 11,50 5 019170004 mm BSPT
3/8"
1/2" 8 1/4"
10 3/8"
Ø GAS €  1917F 12 1/2" € 
BSPT 2,60 5 019160005 universal ball quick couplers, 2,70 3 019180008
4,10 5 019160010 shockproof rubber, 4,20 3 019180010
1/4" 4,10 5 019160012 female threaded, cylindrical (BSP) 6,40 3 019180012
3/8"
1/2" • Matches couplings 1916I and 1916G

1916GF 1919FE1/4
filter-regulator-lubricator
quick couplings, European profile,
female threaded, tapered (BSPT)  88 mm

Ø Ø 1/4”
GAS
Ø BSPT

Ø GAS €  150 Ø 1/4”
BSP 11,50 5 019170005 mm GAS
11,50 5 019170010 BSPT
1/4" 12,00 5 019170014
Ø GAS €  3/8"
BSPT 2,70 5 019160055 1/2"
3,10 5 019160060
1/4"
3/8"

1916JM 1917JM Air in/outlet 1/4” GAS BSPT
Pressure gauge inlet 1/8” GAS BSPT
quick couplings, Asian profile, ball quick couplers, Maximum air capacity
male threaded, tapered (BSPT) Asian profile, Maximum pressure 750 l/min
male threaded, cylindrical (BSP) Operating pressure 9,5 bar
Operating temperature
Ø Ø Filter capacity 0,5 - 8,5 bar
Cup capacity 5 - 60 °C
Ø GAS €  Ø GAS €  Weight 5 micron
BSPT 3,80 1 019160406 BSP 19,50 1 019170406
4,05 1 019160410 20,00 1 019170410  15 cc air / 25 cc oil
1/4" 1/4" 20,50 1 019170412 g 700 g
3/8" 3/8"
1/2" 700 € 
270  88,00 1 019190200

1919RB-FE1/4 1919F3/8 1919RF-F
set of spare cups for item 1919FE1/4 filter-regulator-lubricator
spare filter for filters
 150 mm item 1919F - 1/4”, 3/8” and 1/2”

1919RB-FE1/4 €  Ø 3/8” Ø 3/8” 1919RF-F € 
18,50 1 019190210 GAS GAS 9,00 1 019190530
BSPT BSPT

220
mm

1919RF-FE1/4 1919RM-F
spare filter for item 1919FE1/4
spare pressure gauge for filters
item 1919F - 1/4”, 3/8” and 1/2”

1919RF-FE1/4 €  Air in/outlet 3/8” GAS BSPT
5,00 1 019190230 Maximum air capacity 1350 l/min
Maximum pressure 9,5 bar
Operating pressure
Operating temperature 0,5 - 8,5 bar
Filter capacity 5 - 60 °C
Cup capacity 5 microns
Weight
60 cc air / 90 cc oil
1.3 kg

1919RM-FE1/4  1919RM-F € 
14,00 1 019190520
spare pressure gauge kg €   1919ML
for item 1919FE1/4 1,3 137,00 1 019190350 mini lubricators L

Ø 1/8” 1919F1/2
GAS filter-regulator-lubricator
BSPT

Ø

 150 mm

1919RM-FE €  Ø 1/2”
10,50 1 019190220 GAS
BSPT
1919F1/4 Ø 1/2” LØ € 
filter-regulator-lubricator 220 GAS Ø mm mm 18,00 1 019190030
mm BSPT 19,50 1 019190032
1/4" 63 36
1/2” GAS BSPT 3/8" 63 36
2500 l/min
 150 mm 9,5 bar 1919SC
mini water separator
Ø 1/4” Air in/outlet 0,5 - 8,5 bar
GAS Maximum air capacity 5 - 60 °C L
BSPT Maximum pressure 5 microns
Operating pressure Ø
220 Operating temperature 60 cc air / 90 cc oil
mm Ø 1/4” Filter capacity 1.3 kg
GAS Cup capacity
BSPT Weight

LØ € 
Ø mm mm 22,50 1 019190035

1/4" 80 40

Air in/outlet 1/4” GAS BSPT  1919L
Maximum air capacity 1000 l/min ISO 32 lubricating oil
Maximum pressure 9,5 bar kg €  
Operating pressure 1,3 137,00 1 019190450
Operating temperature 0,5 - 8,5 bar
Filter capacity 5 - 60 °C 1919RB-F
Cup capacity 5 microns set of spare cups for filters
Weight item 1919F - 1/4”, 3/8” and 1/2”
60 cc air / 90 cc oil
1.3 kg Density 20°C 875 Kg/m³
Viscosity 40°C 32 cSt
Flammability COC 210°C

 €  1919RB-F €  cc € 
kg 137,00 1 019190250 24,00 1 019190510 16,00 5 019190050
500
1,3  271

CONTAINERS
AND ASSORTMENTS

TOOL CASES & TROLLEYS TOOL BAGS & BOXES

2032TV C6T CP15L C19L
2009N/BV 2029/VV 2028VV 2033P/VV 2036TV C5 C11 CP17L C14 CP15 C18 C19 C20 C20L
5915VU/0 C4 C10 CP17
5915VU/1
5915VU/2 C7 C9 C16 C10S C12
5915VU/3
5915VU/4
5915VU/5
5915VU/AS
5980MQ
5980EL/A
5980EL/B
5980ET/A
5980ET/B
5980U/BIKE
5980ID
5914VU/M
5941KART

272 

2001/B26 2009N/BV 2029/VV
fabric wallet with assortment of 26 tools leather bag for maintenance tool case, made of thick polypropylene,
aluminium edged

2 interior tool panels

mm € 
210,00 1 020090200
530x190x210

2001/B26 €  2009ID
183,00 1 020010050
bag with assortment of tools
55 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 mm for plumbing maintenance mm € 
96N/SC9 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm 270,00 1 020290000
490x380x230
1044F 250 mm
1128BMX 145 mm 2029E

1150 180 mm tool cases with assortments of tools
1201 3x75 - 4x100 - 5,5x150 mm for electronic and electrotechnical
1202 PH1x80 - PH2x100 mm maintenance
1370 300 g
1692 2 m
1770A 9 mm

2001/BV € 
39,50 1 020010051

2005PA/D 2009ID € 
(2009N/BV+5980ID) 686,00 1 020090012
tool pouch,
empty, made from nylon, with belt 2028/VV
tool case, made of polypropylene
2029BG-MQ € 
2​ tool panels (2029/VV+5980MQ) 1.645,00 1 020290257
Interior bottom with removable partitions 1.305,00 1 020290221
Double combination lock 2029 ET/B 1.300,00 1 020290217
(2029/VV+5980ET/B)

2029 EL/B
(2029/VV+5980EL/B)

2029/RT
universal shoulder strap for bags and cases

2005PA/D € 
51,00 1 020050000

2005PA/S mm € 
190,00 1 020280010
tool pouch, 470x185x410 mm
empty, made from nylon, with belt
€ 
2028E 2029/RT 17,50 1 020290900

tool case with assortments of tools for
electronic and electrotechnical maintenance

2005PA/S € 
25,00 1 020050020

2028EL/A € 
(2028/VV+5980EL/A) 921,00 1 020280114
924,00 1 020280118
2028ET/A
(2028/VV+5980ET/A)

 273

2032/TV 2033P 2037/TV
tool trolley, made from plastic tool trolley, made of thick polypropylene, with 4
tool cases with assortments of tools pivoting castors
2 tool panels for electronic and electrotechnical
Tool pocket maintenance Highly shock resistant. Suitable for tool transportation in
Interior bottom with removable partitions aircraft.
2 removable tool panels.
Built-in document pocket.
4 removable pivoting castors for horizontal trolley handling.
2 tote-trays included
2 TSA approved locks with keys
Rubber-coated handle

2033PET/B € 
(2033P/VV+​5980ET/B) 1.425,00 1 020330127
1.123,00 1 020330114
2033PEL/A 1.420,00 1 020330115
(2033P/VV+5980EL/A)

2033PEL/B
(2033P/VV+​5980EL/B)

mm €  2036/TV mm € 
350,00 1 020320110 505,00 1 020370000
430x370x200 tool trolley, 420x325x275 mm
made of thick polypropylene,
2032/TE aluminium edged 2038/TV
tool trolley, made of thick polypropylene
tool trolley with assortments of tools 2 tool panels
for electronic and electrotechnical Telescopic handle - Highly shock resistant
maintenance Ball bearing castors ​- Aluminium sealing profile
-  2 TSA approved locks with keys
-  2 removable tool panels.
- Telescopic handle and big ball bearing castors
- 2 ergonomic rubber-coated handles (including 1 side handle)
- Capacious bottom
- Document pocket
- 3 tote drawers

€  mm € 
1.084,00 1 020320228 410,00 1 020360000
1.081,00 1 020320214 490x380x260

2032TET/A 2036E
(2032/TV+5980ET/A)
trolley with assortments of tools
2032T EL/A for electronic and electrotechnical
​(2032/TV+5980EL/A) maintenance

2033 P/VV mm € 
670,00 1 020380000
wall tool case, made from aluminium, with ABS 430x500x340
sides

2 tool panels
Interior bottom with removable partitions

mm €  2036TET/B € 
392,00 1 020330300 (​ 2036/TV+5980ET/B) 1.445,00 1 020360123
500x380x200 1.440,00 1 020360118
2036EL/B
274  (​ 2036/TV+5980EL/B)

2041UC 2055HB 2080/V6-U
Utility Case with assortment of 33 tools "Home Bag" case with assortment of 24 tools
removable tote-tray for organizer tool case
2080/V6

2041UC € 
280,00 1 020410200

55 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 mm 2055HB € 
96/SC9 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm 166,00 1 020550210

111 200 mm 55 6x7 - 8x9 - 10x11 - 12x13 mm 2080/V6-U € 
1048V 250 mm 96N/SC9 1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm  90x60x50 mm 2,10 1 020800066
1128BMX 145 mm 1128BMX 145 mm
2080/V12
1150 180 mm 1150 180 mm
1201 2,5x50 - 3x75 - 4x100 - 5,5x100 - 6,5x150 mm 1048V 250 mm organizer tool case with 12 removable tote-
1202 PH0x60 - PH1x80 - PH2x100 mm trays
1370 300 g 1201 3x75 - 4x100 - 5,5x100 mm
1692 3m 1202 PH0x60 - PH1x80 - PH2x100 mm
1771 170 mm 1370 300 g
1834/70 70 Lumen / 140 mm 1692 3m
1639NS-N 25m
1696 200 mm ​ 373x275x70 mm - ​ 3 Kg

535x282x87 mm - ​ 4,5 Kg

2051N 2060/VV
hard cavity wall tool case
assortment of 55 tools
for nautical maintenance ​Floating, waterproof/watertight
with shockproof polypropylene case Made from thick resin
With manual pressure release valve

2051N €  IP67
676,00 1 020510200 mm

42 7 - 8 - 10 - 12 - 13 - 14 - 17 - 19 mm 490x410x210 €  mm € 
55AS 3/8x7/16 - 1/2x9/16 - 5/8x11/16" 370,00 1 020600101 46,00 1 020800000
96/SC9 1,5÷10 mm 2080/V12 300x145x330

111 200 mm 2080/V6 2080/V12-...
920A  10 - 12 - 13 - 14 - 17 - 19 mm
920AS  7/16 - 1/2 - 9/16 - 11/16 - 7/8” organizer tool case with 6 removable tote-trays removable tote-tray for organizer tool case
920/22 255 mm - 1/2 - 1/2 and adjustable partitions 2080/V12​
920/25 1/2 - 1/2
920/42 1/2 2080/V12-S 2080/V12-M
920/55 1/2
956C 1/2 - 16 - 20,8 mm mm €  2080/V12-S 2080/V12-L
1048 250 mm 30,00 1 020800060  95x75x65 mm
1084BM 160 mm 2080/V6 385x320x60 € 
1128BMX 145 mm 2080/V12-M 2,70 3 020800013
1150BM 180 mm  145x75x65 mm 4,10 2 020800015
1166BM 160 mm 7,10 1 020800020
1201 3x75 - 4x100 - 5,5x150 - 6,5x150 mm 2080/V12-L
1202 PH1x80 - PH2x100 mm  295x75x65 mm  275
1390 Ø 35 mm
1490/2 ø max 240 mm
1737 145 mm
1778X
1995 WD40 400 ml
1639NS-N 25m

 585x393x92 mm -  9 kg

C4 - 2104 C6T - 2106 C8 - 2108
tool basket made of technical fabric technical fabric tool trolley
tool rucksack, made of technical fabric, with
Removable internal tool panel castors
Internal and external pockets and elastic tool holder
Sturdy waterproof base with rubber feet
Supplied with shoulder strap

C4 €  C8 € 
86,00 1 021040000 2108 VU/1 202,00 1 021080000
2104VU/0 420,00 1 021040121 (C8+5915VU/1) 607,00 1 021080021
(C4+5915VU/0)
 4​ 70x370x280 mm -  4 kg

​ 360x330x260x mm - ​ 2,5 kg € 
172,00 1 021060010
C6T 506,00 1 021060121 C9 - 2109
2106T/VU0 technical fabric tool bag
C5 - 2105 (C6T+5915VU/0)
tool rucksack, made of technical fabric • Hard base
 480x370x220 mm -  4,5 kg • Interior and exterior tool pockets
• Exterior pocket with zip closure for enhanced safety
C7 - 2107 • Pocket with strap closure for personal belongings
technical fabric tool bag • Double bottom
• Double string for levels
2 removable interior tool panels • Shoulder strap for easier transport
Interior PC pocket
2 exterior front pockets
Interior bottom made of plastic, with removable partitions

C5 €  C9 € 
2105VU0 120,00 1 021050000 2109 VU/1 96,00 1 021090000
(C5+5915VU/0) 454,00 1 021050121 (C9+5915VU/1) 501,00 1 021090021
2109VU/3
 500x400x180 mm -  2,5 Kg (C9+5915VU/3) 861,00 1 021090124

 550x280x320 mm -  2,6 kg

C9/RT

shoulder strap for items
C4,C7,C9,C10,C10S,C11 and C12

C7 € 
2107VU/2 180,00 1 021070000
(C7+5915VU/2) 525,00 1 021070102
2107VU/3
​(C7+5915VU/3) 945,00 1 021070104

​ 440x370x170 mm - ​ 3,5 kg € 
12,00 1 021090900
C9/RT

276 

C10 - 2110 C13
technical fabric tool box
tool trunk with castors,
Hard frame made of sturdy polypropylene
Double bottom. Bottom can be removed for increased bag
capacity
Tilting handle for easier access to tools
Elastic tool bands and interior and exterior pockets
Cover
Tool tray included in double bottom

C11 - 2111
technical fabric tool box

€  C13 € 
121,00 1 021100000  870x410x350 mm -  7,2 kg 257,00 1 021130000
526,00 1 021100021
C10 C14
2110 VU/1 886,00 1 021100024
(C10+5915VU/1) tool trolley, made of polypropylene, with 4
2110VU/3 942,00 1 021100026 drawers
(C10+5915VU/3)
2110VU/AS • Injection polypropylene frame for increased shock
(C10+5915VU/AS) resistance.
• Lid-protected front accommodates 4 pull-out drawers
 520x220x250 mm -  3,3 kg (470x255):
1 drawer 30 mm high
C10S - 2110S C11 €  2 drawers 60 mm high
technical fabric tool box 2111 VU/1 72,00 1 021110000 1 drawer 90 mm high
(C11+5915VU/1) 477,00 1 021110101 • Front centralized lock allows top and front lids to be closed
​Hard frame 2111VU/3 simultaneously.
Double bottom. Bottom can be removed for increased bag (C11+5915VU/3) 837,00 1 021110104 • Two side handles
capacity • 4 sturdy rear castors 
Tilting handle for easier access to tools  400x240x220 mm -  2 kg • Removable top tray
Elastic tool bands and interior and exterior pockets • Tool panel built into lid
Cover • 3 tote-trays included
Tool tray included in double bottom • Nameplate
• Can be closed with TSA lock
C12 - 2112

technical fabric tool bag

Removable interior tool panel
Elastic tool bands and capacious interior and exterior pockets
Bag opens at front for easier access to tools at workplace
Hard, waterproof base with rubber feet
Can be used with trolley C8

C10S € 
2110S VU/1 95,00 1 021100001
(C10S+5915VU/1) 500,00 1 021100101
2110SVU/3
(C10S+5915VU/3) 860,00 1 021100104

 420x220x250 mm -  2,3 kg

C12 €  C14 € 
2112ET/A 156,00 1 021120000 662,00 1 021140000
(C12+5980ET/A) 890,00 1 021120128 2114VU/M 1.550,00 1 021140009
2112ET/B (C14+5914VU/M)
​(C12+5980ET/B) 1.190,00 1 021120129
2112VU/5
(C12+5915VU/5) 1.105,00 1 021120156

​ 500x370x270 mm - ​ 5 kg  580x380x455 mm -  10 kg

 277

CP15 - 2115 CP17 - CP17L - 2117
tool box, made from plastic, removable tote-
tray and tool trays tool box,
made of stainless steel and plastic,
• 1 tool tray built into cover removable tote-tray
• 2 removable tool trays with adjustable partitions
• 1 interior tote-tray with adjustable partitions

CP17
 500x200x220 mm

CP15 €  2115P L-MQ32
2115PVU/1 37,00 1 021150201
​(CP15+5915VU/1) 442,00 1 021150231 assortment of 32 insulated tools for hybrid
2115PVU/2 cars, in plastic tool box with soft thermoformed
(​ CP15+5915VU/2) tray

 ​445x240x250 mm -  2 kg 382,00 1 021150233

CP17L
 575x245x265 mm

CP15L - 2115 CP17 € 
tool box, long series, made from plastic, 2117P-VU/1 68,00 1 021170500
removable tote-tray and tool trays (CP17+5915VU/1) 473,00 1 021170041

• 3 tool trays built into cover with adjustable partitions 2117P-VU/3 833,00 1 021170044
• 1 interior tote-tray with adjustable partitions (​ CP17+5915VU/3)
2115PL-MQ32 €  98,00 1 021170502
959,00 1 021150332 CP17L 503,00 1 021170141
2117L-VU/1
920MQ/55A (CP17L+5915VU/1) 863,00 1 021170144
89MQ 10-12 mm
850MQ 1/4" 2117PL-VU/3
(CP17L+5915VU/3)
860TX/A10 T7-T8-T9-T10-T15-T20-T25-T27-T30-T40
920MQ/A 8-10-12-13-14-17-19 mm C18 - 2118
920MQ/21 125mm
920MQ/22 250mm tool box
made from sheet metal
1048MQ250 250mm
1150MQ 180mm

1164MQ160 160mm
1272MQ 4.5X80-6X100mm
1274MQ 3X100-4X100-5.5X125

1995MQ/G2 G2
CP15L

€  C16 - 2116
49,50 1 021150202
455,00 1 021150241 tool box, made of plastic,
with interior object compartment, empty

CP15L 814,00 1 021150244
2115PL-VU/1
​(CP15L+5915VU/1)
2115PL-VU/3
(CP15L+5915VU/3)

558x277x270 mm -  2,5 kg

C18 € 
2118 VU/1 32,50 1 021180001
(C18+5915VU/1) 438,00 1 021180031

 450x200x100 mm -  3 kg

C16 € 
2116 VU/1 82,00 1 021160000
(C16+5915VU/1) 487,00 1 021160101
2116VU/3
(C16+5915VU/3) 847,00 1 021160104

 500x260x260 mm -  2,5 kg

278 

C19 - 2119 - C19L - 2119L C20TSS C22W

three-section cantilever tool box, five-section cantilever tool box, made of AISI tool trunk,
made from sheet metal 304 stainless steel made from sheet metal,
lined for enhanced tool protection

C19 C22W O
 450x200x160 mm  690x300x360 mm

C19L C22WL O
 550x200x160 mm  990x300x360 mm

C19 €  C22W-O € 
C19L 42,50 1 021190001 C22WL-O 190,00 1 022000269
2119VU/3 55,00 1 021190002 247,00 1 022000299
(C19+5915VU/3) 807,00 1 021190024 C22W O:  15 kg
C22WL O:  28 kg
2119L-VU/3 820,00 1 021190124 € 
(C19L+5915VU/3) 235,00 1 021203001
C20TSS
: 450x200x210 mm -  4kg

C22B C22P

tool trunk, tool trunk for building yards, made of sheet
made of sheet metal metal

C20 - C20L - 2120 built-in, retractable handles
raised shoes for forklift truck handling
five-section cantilever tool box, double burglar-proof lock closure (not included)
made from sheet metal

C20 C22B O
 450x200x210 mm  720x320x310 mm

C22PM O
 915x540x430 mm

C22BM O
 850x360x350 mm

C20L
 550x200x210 mm

C20 € 
2120 VU/2 60,50 1 021200001
(C20+5915VU/2) 405,00 1 021200016

2120VU/3 825,00 1 021200028
(C20+5915VU/3)
1.028,00 1 021200018 C22BL O
2120 VU/4  1010x410x400 mm
(C20+5915VU/4)
881,00 1 021200021 C22PL O
2120VU/AS  1220x720x615 mm
(C20+5915VU/AS)
65,50 1 021200002
C20L 410,00 1 021200116
2120L-VU/2
(C20L+5915VU/2) 830,00 1 021200128 C22B-O € 
C22BM-O 170,00 1 022000150
2120L-VU/3 1.033,00 1 021200118 C22BL-O 196,00 1 022000160 C22PM-O € 
(C20L+5915VU/3) 263,00 1 022000170 C22PL-O 505,00 1 022000240
C22B O:  13 kg 783,00 1 022000245
2120L-VU/4 886,00 1 021200121 C22BM O:  20 kg C22PM O:  39 kg
(C20L+5915VU/4) C22BL O:  26 kg C22PL O:  67 kg

2120L-VU/AS
(C20L+5915VU/AS)

 279

ROLLER CABS & CONTAINERS

C22S C23S C23SC C23ST C39/6 C59 C39/8
C55
C33/6 C39MD C33/8
C24SL- C39SM C24SA/8
CAB C39/7 C24S/8
C24SL C33/7
C24SA/6 C24SA/7
C24S/5 C24S/6 C24S/7

LOOSE TOOLS 5902MT
without supports5902MT/AS
5902VI
with supports 5904VG/3
5905VG/1
TRAYS 5905VG/2
soft modules5910VI/3
5953VI
5953VGfoam trays
5954VI
5954VG
5940SBK
5941 VU-M
5957U-P
5957VG
5957VI
5958U
5904VU/1M
5904VG/1M
5904VU/2M
5904VG/2M
5927VU/M
5935VG/1MB
5935VI/1MB
5935VI/2MB
5935ET/1MB
5935VU/1MB
5988ROAD/7M
5988U6/M
5904VI/1T
5904VG/5T
5904VI/2T
5904VI/3T
5904VG/2T
5904VU/3T
5904VU/2T
5904VG/3T
5908VG/2T
5908VI/2T
5910VI/3T
5910VG/3T
5938U/2T

280 

ROLLER CABS & CONTAINERS

C24SA-XL C25 C27S C28 C30S C35 C38 C39T C41H C42H C53 C57SP
C55PP C57SB
C54 C55PS C57SA C58P

 281

C22S
portable tool chest
with three drawers

Main features:
• Three drawers (588x277 mm)
with ball bearing slides:
1 drawer, 50 mm high
2 drawers, 70 mm high.
• Front centralized safety lock.
• Retractable side handles for ease of handling.

 19 kg

C22S-O

C22S-G C22S-R

50 mm 25 kg
70 mm 25 kg

C22S-O € 
C22S-G 344,00 1 022000501
C22S-R 344,00 1 022000502
344,00 1 022000503

C23S
portable tool chest
with five drawers

Main features:
• Five drawers (588x277 mm)
with ball bearing slides:
2 drawers, 50 mm high
3 drawers, 70 mm high.
• Front centralized safety lock.
• Retractable side handles for ease of handling.

 26 kg

C23S-O

C23S-G C23S-R

50 mm 25 kg
70 mm 25 kg

C23S-O € 
C23S-G 430,00 1 023000501
C23S-R 430,00 1 023000502
430,00 1 023000503
282 

C23SC - 2300SC
portable tool chest
with eight drawers

Main features:
• Eight drawers with ball bearing slides:
4 drawers, 50 mm high
3 drawers, 70 mm high
1 drawer, 100 mm high.
• Front centralized safety lock.
• Retractable side handles for ease of transport.

 28 kg

C23SC-O

C23SC-G C23SC-R

50 mm 25 kg
70 mm 25 kg

C23SC-O € 
C23SC-G 485,00 1 023000511
C23SC-R 485,00 1 023000512
485,00 1 023000513

C23ST

portable tool chest
with five drawers

Main features:
• Five drawers (588x367 mm) with ball bearing slides:
5 drawers, 70 mm high.
• Front centralized safety lock.
• Can be fitted with kit composed of 4 castors and 1 handle (2300ST/KIT)

 36 kg C23ST-O

C23ST-R

C23ST-G

70 mm 25 kg

C23ST-O € 
C23ST-G 530,00 1 023000521
C23ST-R 530,00 1 023000522
530,00 1 023000523

 283

2300ST/KIT
kit with 4 castors and 1 handle for item C23ST

• Four castors 125 mm in Ø:
2 fixed and 2 steering (two with brakes).
• Telescopic handle

 6,5 kg € 
2300ST/KIT 153,00 1 023000950

CD23S 800 mm
Caddy trolley
480 mm
Main features:
• ABS worktop designed to match tool chests C22S, C23S, C23SC.
• The removable handle can be stored underneath the chassis.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Maximum load: 250 kg.

 14 kg € 
CD23S 196,00 1 023000610

C04TSS-7
​mobile roller cab with seven drawers, made entirely of stainless steel

Main features: 700
• Seven drawers (570 x 410 mm) with ball bearing slides; kg
6 drawers, 83 mm high;
1 drawer, 170 mm high;
• 4 castors Ø 125 mm
2 fixed and 2 steering (two with brakes);
• Front centralized lock;
• Frame made entirely of stainless steel AISI 304
• Castors, supports, ball bearings, drawer interiors
and guides made of stainless steel
• Drawer handles made of aluminium

​ 63 kg

570 mm

410 25 kg
mm 30 kg

83 mm
170 mm

C04TSS/7 €  243
2.085,00 1 024003077
284 

C24S/5 800
mobile roller cab with five drawers kg

Main features: C24S/5-O
• Five drawers (588x367 mm) with ball bearing slides:
2 drawers, 70 mm high
2 drawers, 140 mm high
1 drawer, 280 mm high
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 52 kg

C24S/5-G

70 mm 25 kg C24S/5-R
140 mm 30 kg
280 mm 35 kg

C24S/5-O € 
C24S/5-G 645,00 1 024002051
C24S/5-R 645,00 1 024002052
645,00 1 024002053

 285

C24S/6 800
mobile roller cab with six drawers kg

Main features: C24S/6-O
• Six drawers (588x367 mm) with ball bearing slides:
4 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 280 mm high
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST.
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 55 kg

C24S/6-G

70 mm 25 kg C24S/6-R
140 mm 30 kg
280 mm 35 kg

C24S/6-O € 
C24S/6-G 715,00 1 024002061
C24S/6-R 715,00 1 024002062
715,00 1 024002063
286 

C24S/7 800
mobile roller cab with seven drawers kg

Main features: C24S/7-O
• Seven drawers (588x367 mm) with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 58 kg

C24S/7-G

70 mm 25 kg C24S/7-R
140 mm 30 kg
210 mm 30 kg

C24S/7-O € 
C24S/7-G 775,00 1 024002071
C24S/7-R 775,00 1 024002072
775,00 1 024002073

 287

C24S/8 800
mobile roller cab with eight drawers kg

Main features: C24S/8-O
• Eight drawers (588x367 mm) with ball bearing slides:
6 drawers, 70 mm high
2 drawers, 140 mm high
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST.
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 61 kg

C24S/8-G

70 mm 25 kg C24S/8-R
140 mm 30 kg

C24S/8-O € 
C24S/8-G 835,00 1 024002081
C24S/8-R 835,00 1 024002082
835,00 1 024002083
288 

C24SA/6 800
mobile roller cab with six drawers, kg
with anti-tilt system
C24SA/6-O
Main features:
• Six drawers (588x367 mm), with ball bearing slides:
4 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 280 mm high.
• Drawer bases protected by foamed rubber mats.
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

​ 55 kg

C24SA/6-G C24SA/6-R

70 mm 25 kg
140 mm 30 kg
280 mm 35 kg

C24SA/6-O € 
C24SA/6-G 760,00 1 024002161
C24SA/6-R 760,00 1 024002162
760,00 1 024002163

 289

C24SA/7 800
kg
mobile roller cab with 7 drawers,
with anti-tilt system C24SA/7-O

Main features:
• Seven drawers (588x367 mm) with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Drawer bases protected by foamed rubber mats.
• Does not allow simultaneous opening of several drawers
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 800 kg
• Integrated side bottle holder

 58 kg C24SA/7-G

C24SA/7-R

70 mm 25 kg
140 mm 30 kg
210 mm 30 kg

C24SA/7-O € 
C24SA/7-G 810,00 1 024002171
C24SA/7-R 810,00 1 024002172
810,00 1 024002173
290 

C24SA/8 800
mobile roller cab with eight drawers, kg
with anti-tilt system
C24SA/8-O
Main features:
• 8 drawers (588x367 mm), with ball bearing slides:
6 drawers, 70 mm high
2 drawers, 140 mm high.
• Drawer bases protected by foamed rubber mats.
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC
and C23ST.
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

​ 61 kg

C24SA/8-G C24SA/8-R

70 mm 25 kg
140 mm 30 kg

C24SA/8-O € 
C24SA/8-G 880,00 1 024002181
C24SA/8-R 880,00 1 024002182
880,00 1 024002183

 291

C24SA-XL/7 1000
mobile roller cab with 7 drawers, kg
with anti-tilt system,
long model C24SAXL/7-O

Main features:
• 7 drawers (882x367) mm, with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Sturdy ABS worktop,
with 6 tool trays.
• Sturdy nylon front,
with integrated label holder.
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 1,000 kg.
• Integrated side bottle holder.

​ 84 kg

C24SAXL/7-G

C24SAXL/7-R

70 mm 30 kg
140 mm 35 kg
210 mm 35 kg

C24SAXL/7-O € 
C24SAXL/7-G 1.035,00 1 024002271
C24SAXL/7-R 1.035,00 1 024002272
1.035,00 1 024002273
292 

C24SA-XL/8 1000
mobile roller cab with eight drawers, kg
with anti-tilt system,
long model C24SAXL/8-O

Main features:
• 8 drawers (882x367 mm), with ball bearing slides:
6 drawers, 70 mm high
2 drawers, 140 mm high.
• Sturdy ABS worktop, with 6 tool trays.
• Sturdy nylon front, with integrated label holder.
• Drawer bases protected by foamed rubber mats.
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 1,000 kg.
• Integrated side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 88 kg

C24SAXL/8-G

C24SAXL/8-R

70 mm 30 kg
140 mm 35 kg

C24SAXL/8-O € 
C24SAXL/8-G 1.110,00 1 024002281
C24SAXL/8-R 1.110,00 1 024002282
1.110,00 1 024002283

 293

C24SA-XL/9 1000
mobile roller cab with nine drawers, kg
with anti-tilt system,
long model C24SAXL/9-O

Main features:
• 9 drawers (882x367 mm), with ball bearing slides:
8 drawers, 70 mm high
1 drawer, 140 mm high
• Sturdy ABS worktop, with 6 tote-trays.
• Sturdy nylon front,
with built-in label holder.
• Drawer bases protected by foamed rubber mats.
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 1,000 kg.
• Built-in side bottle holder.
• Paper roll holder item 2400S-R/PC can also be included.

 90 kg

C24SAXL/9-G

C24SAXL/9-R

70 mm 30 kg
140 mm 35 kg

C24SAXL/9-O € 
C24SAXL/9-G 1.175,00 1 024002331
C24SAXL/9-R 1.175,00 1 024002332
1.175,00 1 024002333
294 

2400S-R/PC 2400S R/PC-O
paper roll holder 2400S R/PC-G
2400S R/PC-R
• Matches roller cabs C24S
 295
 0,3 kg

2400SR/PC-O € 
2400SR/PC-G 16,50 1 024002951
2400SR/PC-R 16,50 1 024002952
16,50 1 024002953
2400S/PF
bottle holder € 
17,50 1 024002906
• Matches roller cabs C24S
2499PF O
 0,5 kg 2499PF G
2499PF R
2400S/PF

2499PF
bottle holder

• Can match roller cabs C38, C38A

 2,5 kg

2499PF-O € 
2499PF-G 56,00 1 024990210
2499PF-R 56,00 1 024990219
56,00 1 024990230
2499PF/M
universal magnetic bottle holder

 2,2 kg

2499PF/M € 
46,50 1 024990050
2499PC
paper roll holder

• Matches all Tank and roller cabs and C38, C38A.

 2,2 kg

2499PC € 
59,00 1 024990090

C24SL 1100
mobile roller cab kg
with seven drawers
and side tops C24SL-O

Main features:
• Seven drawers (588x367 mm)
with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high.
• Drawer bases protected by foamed rubber mats.
• Four castors 125 mm in Ø:
2 fixed and 2 steering (two with brakes).
• Front centralized safety lock.
• Static load capacity: 1.100 kg.
• Multi-ply wood worktop with holes
for a vice
(1599F/100, to be ordered separately).
• Side compartment with vertically adjustable top.
• Integrated paper roll holder.
• Double rear bottle holder.

 80 kg

C24SL-G C24SL-R

70 mm 25 kg
140 mm 30 kg
210 mm 30 kg

C24SL-O € 
C24SL-G 1.150,00 1 024002101
C24SL-R 1.150,00 1 024002102
1.150,00 1 024002103

C25

Tank trolley with shelf

Main features:
• Foldaway lid.
• 1 sliding drawer.
• Tool tray protected by foamed rubber mats.
• Shelves protected by oil and fuel proof mats.
• Four castors 100 mm in ø:
2 fixed and 2 swivelling (one with brake).
• Safety lock.
• One more shelf M4 can be added on the opposite side.
• Empty thermoformed tray for 1/2" sockets and accessories (024990104).
• Paper roll holder item 2499PC
can also be included

 31,5 kg

C25 € 
615,00 1 025000001
296 

C24SL-CAB 1100
kg
mobile roller cab
with seven drawers
and tool cabinet

Main features:
• Seven drawers (588x367 mm)
with ball bearing slides:
5 drawers 70 mm high
1 drawer 140 mm high
1 drawer 210 mm high.
• Drawer bases protected by foamed rubber mats.
• Four castors, Ø 125 mm:
2 fixed and 2 steering (two with brakes).
• Front centralized lock.
• Side tool cabinet with lockable door and vertically adjustable interior top.
• Static load capacity: 1,100 kg.
• Multi-ply wood worktop with holes for a vice
(1599F/100, to be ordered separately).
• Built-in paper roll holder.
• Double rear bottle holder.

 82 kg

C24SL-CAB/O

C24SL-CAB/G

C24SL-CAB/R

70 mm 25 kg
140 mm 30 kg
210 mm 30 kg

C24SL-CAB/O € 
C24SL-CAB/G 1.185,00 1 024002191
C24SL-CAB/R 1.185,00 1 024002192
1.185,00 1 024002193

 297

C27S
folding tool trolley for outdoor jobs

Folding tool trolley. Its unique patented design guarantees an effortless
transport.
2 drawers, 588x277 mm, with ball bearing slides for two-way opening.
Large lower object compartment,  588x277x220 mm.
Sheet metal frame.
2 fixed castors, Ø 160 mm, and 2 steering castors with brake, Ø 100 mm
Thermoplastic worktop with 6 built-in tool trays.
Centralized lock.
Can accommodate drawer partitions and MC foam tool trays

 20 kg

C27S-O

C27S-R

C27S-G

70 mm 20 kg

C27S-O € 
C27S-G 540,00 1 027000201
C27S-R 540,00 1 027000202
540,00 1 027000203
298 

C28 1200
SuperTank trolley with worktop and ten drawers kg

Main features: C28-O
• Ten drawers (588x367 mm) with ball bearing slides
• Quick, safe system for opening and closing drawers, with nylon and
fibreglass front
• Five side drawers:
4 drawers, 70 mm high
1 drawer, 210 mm high
• Five front drawers:
4 drawers, 70 mm high
1 drawer, 210 mm high
• Drawer bases protected by foamed rubber mats
• Four high-capacity castors 150 mm in Ø:
2 fixed and 2 steering (with brakes)
• 2 centralised safety locks
• Multiply wood worktop with holes for a vice
(1599F/150, to be ordered separately)
• 4 bottle holders: 2 front and 2 rear
• 6 side tool trays
• Side compartment with foldaway door with lock
• 135-mm-high storage compartment with plastic-covered base
• Static load capacity: 1200 kg

 130 kg

C28-G

C28-R

70 mm 25 kg
210 mm 30 kg

C28-O € 
C28-G 2.045,00 1 028000301
C28-R 2.045,00 1 028000302
2.045,00 1 028000303

 299

C30S 1800
MaxiTank​mobile workbench kg

Main features:
• 5 front drawers with ball bearing slides:
3 drawers (367x588 mm), 90 mm high
1 drawer (610x588 mm), 90 mm high
1 drawer (610x588 mm), 180 mm high.
• Quick opening system with aluminium front.
• Drawer bases protected by foamed rubber mats.
• Can accommodate thermoformed trays.
• One hydraulic jack, designed to lift front part easily.
• Four high-capacity castors:
2 steering, front, Ø 150 mm
2 fixed, rear, Ø 170 mm.
• Oil-proof, rubber-coated worktop,
1300x800 mm, with drain hole
for fluid collection in a small tank.
• Can accommodate vice item 1599F/150
(to be ordered separately).
• Storage compartment, 720x250x1300 mm,
with PVC-coated worktop,
and front sliding panels.
• Centralized lock for drawers and panels.
• Integrated side bottle holders.
• Integrated paper roll holder.
• Static load capacity: 1,800 kg.
• Can accommodate a multi-ply wood worktop (3000 S/PLM), to be ordered
separately.
• Can accommodate vice item 1599F/150 (to be ordered separately).

​ 200 kg

90 mm 30 kg
180 mm 35 kg

C30S €   1240x740x26 mm
3.240,00 1 030000100
3000S/PLM
wood worktop for item C30S € 
340,00 1 030000150
 10 kg

3000S/PLM

300 