Catalog No. 597A MS Bucket Elevators For Mill Duty and ...

MS Catalog No. 597A

Bucket Elevators
For Mill Duty and
Super Capacity Service

M S Bucket Elevators – Designed and Engine

MILL DUTY BUCKET ELEVATOR

“L”

ELEVATOR Y = BEARING BACKING “N” HOOD SECTION
“Y”
“C”
OUTSIDE HEAD SECTION “P” “P”
3-0” OR 5-0” 3’
“A”
INSIDE 6’

“A”
“A”

1 STANDARD ENTRY CASING SECTION 10’–0’ LG. 10’–0’ LG. “__” LG. “R” “Q”
STYLE “A” DISCHARGE STYLE “B” DISCHARGE

“D” “LIFT”

STANDARD CASING SECTION(S) “B”
INSIDE

CENTERS 1 SPECIAL CASING

”AA”

“C” 8’–0’ BOOT SECTION “AB”
OUTSIDE
“AC”
CLEAN-OUT 3’
DOOR
“E”
“K” ”K” “F”

“J” “H” “H” “J”

Mill Duty Bucket Elevator at a
leading cement manufacturer.

AC Bucket ACS Bucket

2 Copyright © 2009 - Screw Conveyor Corporation, Hammond, Indiana

neered For Continuous Reliable Service

3

®

SUPER CAPACITY BUCKET ELEVATOR

“L”

ELEVATOR Y = BEARING BACKING “N” HOOD SECTION
“Y”
“C”
OUTSIDE 5’-0” HEAD SECTION “P” “P”
3’
“A”
INSIDE 6’

1 STANDARD ENTRY CASING SECTION 10’–0’ LG. 10’–0’ LG. “__” LG. “A” “A”

STANDARD CASING SECTION(S) “R” “Q”
STYLE “A” DISCHARGE STYLE “B” DISCHARGE

CENTERS 1 SPECIAL CASING “D” “LIFT”

“B”
INSIDE

”AA” INSPECTION
DOORS
“C” 8’–0’ BOOT SECTION
OUTSIDE “AB”

CLEAN-OUT “AC”
DOOR 3’

“E”
“F”

“K” ”K” “J” “H” “H” “J”

Super Capacity Bucket Elevator
at an innovative recycling facility.

SC Bucket
4

®

GENERAL SPECIFICATIONS

MILL DUTY AND TEM-U-LOC™
SUPER CAPACITY CASING
BUCKET ELEVATORS

The M/S intermediate Tem-u-loc™ casing
design provides for the strength normally
found in corner angle panel construction
casings. By virtue of this construction we not
only maintain the strength, but gain many
positive features such as:

Ⅵ Rugged design with good looks.

Ⅵ Exterior welds are minimized ––
less chance for leakage.

Ⅵ Rounded inside corners reduce
material build-up.

Ⅵ Continuous, reliable service.

Ⅵ Extra-heavy, fixture positioned angle end
flange frames, continuously seal welded,
assure proper alignment in field erection.

TYPICAL TEM-U-LOC™ CASING CONSTRUCTION
MINIMUM THICKNESS = 9 GA.

Mill Duty Elevators –– Super Capacity Elevators ––
Centrifugal Discharge Continuous Discharge

These elevators developed primarily for use in the These elevators provide an expansion of our Industrial
Cement Industry can also be used for handling many Series COB and COC Continuous Bucket elevator lines.
other products in similar abrasive applications. Two These Super Capacity units are designed to elevate
styles of buckets are used – the AC Bucket which has large volumes of heavy and/or abrasive materials.
a flat back and the ACS Bucket which has a These products can range from fines to large lumps
saddleback design where the buckets wrap around with densities up to 100 pounds per cubic foot. Heavy
the chain sides. Both of these buckets have hooded steel buckets (minimum # 10 ga.) are mounted between
backs which allow continuous spacing. Both buckets two strands of roller chain with rear of buckets
will handle free-flowing materials up to a 2” size lump. extending back of the chain centerline thus affording
greater carrying capacity. Roller chain is contained by
extra heavy duty track angle guides.

5

EXPERIENCE
IN MOTION

Screw
Lifts®

Bucket
Elevators

Screw
Conveyors

Super-Flo® Never Operate Conveyors Without Covers.

Enduro-Flo® Super-V™

For Over 75 Years We Have Been A Dependable Source For
Performance Proven Industrial Bulk Material Handling Equipment.

Put Our Experience to Work for You.

700 HOFFMAN STREET, HAMMOND, INDIANA 46327-1894 PHONE 219-931-1450 FAX: 800-805-6527 WEB ADDRESS: www.screwconveyor.com

Winona, MS 662-283-3142 Visalia, CA 559-651-2131 Chanute, KS 620-431-0440 Guadalajara, Jal. Mexico 333-645-7110
FAX: 800-213-3084 FAX: 800-651-2135 FAX: 800-213-3086 FAX: 333-663-2369