Tool News, Quarter 4 2021

The Authority on Tools Since 1965

October-December 2021

AeroBlade™ 24” Long Reach Nozzle Blow Gun

• NEXT-GEN DESIGN WITH EXTREME AIR VOLUME – 90-degree airflow
provides focused high-pressure output of 24 CFM, 5x the air volume
compared to similar products

• 24” LONG BLOW GUN FOR HARD-TO-REACH AREAS - This high-
pressure air wand can thoroughly clean and blow away debris from
inaccessible air filters, radiators, condensers, machine shops, and
machinery from the inside out.

MLT-158-AB24

$4499◉

Wedge® Compact, Rechargeable, Hi- 20V MAX XR® 1/2” Brushless
Performance Every Day Carry Flashlight Impact Wrench

• Compact, USB-C rechargeable waterproof EDC flashlight • Max Torque: 700 ft/lbs
• Slim, ergonomic design for clean pocket carry • 3 Speed settings: 400/1200/1900rpm
• Constant on and momentary modes, up to 3 hour run time
• 300 Lumens on constant on mode, 1000 Lumens on momentary FREE$D3W3A9-9D9◉CF899HB
Cordless Tool
THRO™ (Temporarily Heightened Regulated Output) mode Starter Kit
• Rugged anodized aluminum construction with waterproof USB-C port DWA-DCB205CK

STR-88810 Black QLuiamnittietides
STR-88811 Coyote

$9999◉

NOCO BOOSTX SERIES
• An all-new design with extreme jump starting
power for fast and powerful engines starts.
• Delivers incredible power, ultra-fast charging,
and unmatched versatility.
• 5x Faster Charging
NOC-GBX45 1250A 6.5L NOC-GBX75 2500A 8.5L
$12499 $25999
NOC-GBX55 1750A 7.5L NOC-GBX155 4250A 10.0L
$17999 $34999

M12 FUEL™ High Speed Ratchets FREE TwinGrip 8” Slip Joint Pliers

• Delivers 450 RPM for best-in-class productivity M12 REDLITHIUM™ • Unique combination of front and side gripping
• Pneumatic ratchet performance with up to 35 2.0Ah Battery • Front jaw design grips stripped screws
MIL-48-11-2420X • Optimized side jaw with opposing teeth for
ft-lbs max torque
• Compact head design and recessed shift knob maximum force
• Side gripping jaws for round, square and hex
provide users with more access in tight spaces
materials
MIL-2566-20 1/4” Bare Tool • The only 5 adjustment push-button slip joint
$19999◉
pliers in the market
OR
KNI-8201200SBA
MIL-2567-20 3/8” Bare Tool
$19999◉ $3999

New Items Special Promotions

Flexible Hose Clamp Tool 11pc Ratcheting Serpentine Kit

• 24” Flexible Cable Allows Access to Clamps Difficult to Reach with Other Tools. • Removes and Installs Belts on Serpentine Belt
• Specially designed cable assembly with spring helps prevent cable breakage Systems Using the Spring Loaded Idler Pulley.

from over tightening. Tool is very strong and will work on even the most stubborn • Ratcheting head with freewheel position allows
clamps. For use on clamps found on radiator hoses, heater hoses, and fuel lines. maximum leverage.
Simply squeeze the handles to expand and hold hose clamps in any open position.
Expands hard-to-reach flat-band and Mobea-type hose clamps safely and easily. LIS-59650

LIS-17300 $9999

$8499 Timing Tool for Ford 3.5L Turbo

Spill-Free DEF Kit with GM Adapter • For Use When Servicing the Timing Chain on
2017 and Newer Ford V6 3.5L Turbo Engines.
• The adapter securely holds the funnel in place for safe and spill-free
filling on 2011 to 2019 Duramax Vehicles. Also Works on Side Fill Vehicles. LIS-37230

• Translucent funnel with 6” opening provides a visual check to see fluid $8499
levels when filling tank. Includes 5” extension and 45° elbow for hard-to-
reach DEF fill ports. Lid to keep contaminants out as well as storage for
parts. Important: DEF is corrosive for some metallic surfaces.

LIS-24210

$1999

Long Door Panel Tool

• 19.75” Long Tool is Great to Reach Upholstery Clips in the Middle of
a Door Panel.

• Square Notch Design Removes Both Plastic and Metal Clips On Cars
and Trucks. Helps eliminate broken fasteners. Place the tool under
the edge of the door upholstery panel and insert into the fastener as
far as possible...Then simply pry up. Heat treated for durability.

LIS-35600

$1999

6pc Pry Bar with Strike Cap Set 11pc Gasket Hole Puck Set

• Individual sizes included: 12”, 17”, 25”, 31”, 36” and 45” • Designed to cut holes and internal radii
• Exceeds ASME standards in gaskets and other soft material (i.e.,
• Strike protection had capped handles are ergonomically rubber, lead foil, linoleum, felt fiber).

designed for comfort, secure grip and durability • Contains long driving mandrel.
• Ten punch sizes: 1/4”, 5/16”, 3/8”,
LNG-853-6ST
7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 1”.
$15999
LNG-950
Pail Pump for 5 and 6 Gallon Pails
$4499
• Fits all 5 and 6 gallon pails.
• Easily dispenses fluid with lift action. 90 Tooth Heavy Duty Ratchets
• For use with all non-corrosive liquids.
• The VIM Tools Heavy Duty 90T Ratchets feature a
TOO-17500 90-tooth reversible gear head that requires only
4 degrees of sweep, making them ideal for tight
$3499 spaces and jobs needing accurate movement.

40” Long 3/4” Drive Breaker Bar • Ratchets meet 200 percent ANSI torque
specifications.
• Head Swivels 180
• Heavy Duty Chrome Vanadium Steel • They have an ergonomic handle and the ratchet
head can be serviced quickly and easily.
Construction
• Maximum torque: 1000 Ft/Lbs. (138 Kg/M) VIM-HDR410 1/4” Dr

TIT-12048 $3499

$8499 VIM-HDR614 3/8” Dr

Dual Flex Head 1/4” & 3/8” Ratchet $4999
with Removable Drives
VIM-HDR818 1/2” Dr
• The quick-disk on the drive head allows for quick tightening
or loosening of fasteners when ratcheting is not required. $7999

• Works with all 1/4’’ bits and 10mm fasteners. Professional Snap Ring
• Includes 1/4’’ & 3/8’’ square drive inserts. Installation & Removal Tool Kit

VIM-HBR1046 • 1 Snap Ring Pliers
• 1 ClipKey for 1/4”, 3/8” & 1/2” tools
$6999 • 6 sets each of 1/4”, 3/8” & 1/2” Clips & O-Rings
• An accessory tool kit with Allen Wrench, extra
Drop and Drive 1/4” Bit Driver
cleaning pads & an O-Ring remover hook
• Spring-loaded bit adapter that guides it drives • The only tool kit on the market with a snap
• Guide will not only retract but will also extend back
• Guide locks to easily interchange bits ring installation tool that works on 1/4” impact
• Internal magnet holds bits in place wrenches.

CAL-494 JCL-PTK-CK

$1499 $5499

5-In-ONE™ Universal Safety Quick-Connect Coupler

• Accepts all major interchanges: Industrial (M-Style), High Flow (V-Style),
Automotive (T-style), ARO (A-Style) & Lincoln (L-style)

• Safely bleeds off air pressure before releasing connector
• Quick connect coupling for a safe & easy air hose connection
• NPT: 1/4” Female or Male NPT

MLT-S-1751

$1999

New Items Special Promotions

Hand Rivet Stud Setter Kit – Metric & SAE Boost MAX Commercial Jump Starter
with Rivet Studs
• Most powerful lithium jump starters yet. Designed for the
• Works like a rivet nut but instead of female threads offers a male largest, most challenging engine starts ever.
threaded stud you can hang from and tighten down attachments on
• UltraSafe - Safe and easy to use battery jump starter pack
• Sets the following sizes and includes 5pc each 5/8” long threaded without the worry of incorrect connections or sparks.
rivet studs: M5, M6, M8, 10-24, 1/4-20 & 5/16-18
• Commercial Grade - It’s commercial in every way. It jump
AST-1455 starts almost every type of vehicle and equipment.

$11499 • Multi-Functional - It’s not just a lithium jump starter but also
a portable power bank for recharging smartphones, tablets,
Rechargeable Pivoting Flashlight and other USB devices, with an ultra-bright 600-lumen LED
flashlight
• 110° Pivoting Head with Spot & Flood Beam
• Magnetic Base for Hands-Free Use NOC-GB250 5250A 12V
• 500 Lumens of TRUEVIEW™ High Definition Output NOC-GB251 3000A 24V
• Includes: Light, Charging cable, rechargeable battery
$1,09999◉
MIL-2113-21
56-Watt XGC Power Adapter For GB70/
$8999◉ GB150/GB500

Rechargeable ROVER™ Pivoting Floodlight • A 56-watt power adapter for rapidly recharging NOCO Boost
UltraSafe Lithium Jump Starters models - GB70, GB150, and
• Light Head Pivots 210° GB500.
• Wide Magnetic Base
• Built-In Carabiner • Charges five times faster than a traditional 2-amp USB wall or
• 550 Lumens of TRUEVIEW™ High Definition Output car chargers.
• Includes: Light, Charging cable, rechargeable battery
• Designed to work anywhere in the world with a wide input
MIL-2114-21 range of 110-240VAC 50-60Hz.

$7499◉ NOC-XGC4

Rechargeable 250L Penlight w/Laser $5499◉

• Integrated laser pointer for faster jobsite communication Protective Case For Boost MAX™
• 250 Lumens of TRUEVIEW™ High Definition Output, 70M beam
• Lightweight, durable, and rugged custom exterior.
distance • Equipped with a zipper closure, reinforced

MIL-2010R handle, and shoulder carrying strap for storing
and carrying Boost.
$5999◉ • Offers protection from moisture, impact, dust,
and environmental factors.
Rechargeable 500L Flashlight w/Magnet • Fits the NOCO Genius GB500 Boost UltraSafe
Jump Starters
• 500 Lumens of TRUEVIEW™ High Definition Output
• Bulls-eye beam provides the intensity of spotlighting with wide NOC-GBC016

coverage of floodlighting $22999◉
• 3 light output modes
Mega Airblast™ Bead Seater
MIL-2011R
• Used on Auto, ATV, and Truck Tires
$5999◉ • Designed for use on tires up to 24-1/2 diameter
• ASME-UM certified 5-gallon tank
Rechargeable Magnetic Headlamp and Task • Heavy-duty bar valve quickly releases air
Light
between bead and rim
• Detachable magnet light head for mounting • Air pressure gauge and safety release valve
• Tilting for directing light
• 450 Lumens of TRUEVIEW™ High Definition Output included for operator convenience and safety
• Multiple modes to optimize brightness and runtime
KEN-31444
MIL-2012R
$19999◉
$5999◉
6pc Mini Flip Socket Kit
4pc Hook and Pick Set
• 12-point semi deep mini flip sockets with ¼” drive
• Includes: • All sockets OAL: 1.5” (38mm)
• Straight Pick • Includes: 8mm/10mm, 9mm/11mm, 12mm/14mm,
• Offset Hook
• Hook 13mm/15mm
• 90° Hook • 3” and 5” Extensions

MIL-48-22-9215 CTA-4223

$1999 $5499

M18™ Six Pack Sequential
Charger

• Charges up to Six Batteries Sequentially
• Convenient Carrying Handle
• Pass Through Plug
• Compact Size

MIL-48-59-1806

$13999◉

New Items Special Promotions

4pc Impact Socket Adapter & Magnetic 148pc Master BIt Set
Bit Holder
• Includes Slotted, Phillips, Square,
• Adapts sockets to power drills and drivers Hex, Star, Pozi, Spline, Torq, Clutch
• Detent ball for secure socket retention Bits and Socket Adapters
• Magnetic hex bit holder fits standard 1/4 inch hex bits
TIT-85069
TIT-12002
$3499
$599
21pc 3/4” Drive Jumbo Socket Set
3pc Strikeable Pry Bar Set
• Includes: 3/4 in. Dr. quick release ratchet, 4 and 8 in.
• Pry bar steel cap set with plastic handle extension bars, sliding T-handle, (16) sockets, blow mold case
• Material: EN-8D
• Includes: 12”, 17”, 25” long pry bars TIT-18188 SAE

TIT-17113 • Includes 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16,
1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-13/16, 1-7/8 and 2 in.
$2999
$14999◉
5 pc. Hickory Wood Handle Hammer Set
TIT-18189 Metric
• Set includes: 16 and 32 oz. Ball Pein Hammers
• 32 oz. Rubber Mallet • Includes 19, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 42, 45,
• 3 lb Sledge Hammer 48 and 50mm.
• 3 lb Cross Pein Hammer
• Long-lasting forged steel heads $14999◉
• Classic genuine American Hickory handles

TIT-85070

$6999

BUY ONE M12™ BARE TOOL Tube & Weld Belt
Finish Sander (3/4” x
Polisher Angle Grinder 20.5”) with Belts
MIL-2438-20 MIL-2522-20
$19999◉ $16499◉ • Adjust roller position to create
slack in the belt that allows for
Grease Gun GET A $117 sanding along curved surfaces.
MIL-2446-20 Value!
$19999◉ FREE • Free Speed: 16,000 rpm
Recip Saw
MIL-2520-20 M12 REDLITHIUM™ AST-3039
$19999◉ XC 3.0Ah Battery
MIL-48-11-2402X $19999◉

Rivet Gun
MIL-2550-20
$26999◉

BUY THIS KIT GET A M18 1/2” and 3/8” Impact Wrench Kit
M12 1/2” Drill and
1/4” Driver Combo Kit FREE • Includes:
• 2767-20 1/2” Impact Wrench 1,400 ft/lbs of Nut-
• 2503 1/2” Drill - 1,700rpm & M12 REDLITHIUM™
350in/lbs or torque XC 3.0Ah Battery Busting Torque
MIL-2457-20X • 2960-20 3/8” Impact Wrench 600 ft/lbs of Nut-
• 2553 1/4” Driver - 3,300rpm
& 1,200in/lbs of torque Busting Torque
• Charger
MIL-2596-22 • (2) 5.0Ah Batteries
$32499◉ • Tool Bag

MIL-2988-22
$75999◉

BUY BOTH KIT AND BARE TOOL

+ GET A FREE GREASE GUN YOUR CHOICE OF ONE OF
THE FOLLOWING
FREE
FREE
M18™ Grease Gun
MIL-2646-20X

&3/8” Midtorque Kit 1/2” Compact FREE High Capacity
MIL-2960-22 MIL-2855-20 8.0Ah Battery
MIL-48-11-1880X

$57499◉ $23999◉ 1/2” Drill/Driver FREE
&1/2” Midtorque Kit MIL-2803-20X
3/8” Compact
MIL-2962-22 MIL-2854-20 4.5”/5” Grinder
$49999◉ $23999◉ MIL-2880-20X

M18 Chainsaw/Blower Combo Kit Blower M18 FUEL™ 3/4” Impact Power Tools
Chainsaw Wrench w/ ONE KEY™
• 20,000 rpm • Max 450 CFM
• Purposely built for the M18 FUEL™ 16” Chainsaw to • Power to Clear From 15’ • Up To 1,500 Ft lbs of Nut Busting
provide the power and performance of a gas engine • Reaches full power in Torque in all Modes
up to 40CC. under 1 second
• Kit Includes: Bare Tool, Charger,
Includes 12 Ah Battery and Charger (2) 5.0Ah Batteries, Case

MIL-2727-21HDP QLuiamnittietides MIL-2864-22 (Kit) MBoIoLt -fo4r 928-6146-2864
$61999◉ $72999◉ $3499
MIL-2864-20 (Bare Tool)
$39999◉

M18 FUEL™ 1/2” Ext. Anvil FREE with 2769
Impact Wrench w/ ONE KEY™
1/2” Drive Flip Sockets
• Unique Modes for Sedans, Trucks, and 13/16”x3/4”&17mmx19mm
Box Trucks/Trailers FDS426X/FDM419X

• Up To 1,100 Ft lbs of Nut Busting
Torque in all Modes

• Kit Includes: Bare Tool, Charger, (2)
5.0Ah Batteries, Kit Bag

M18 Fuel™ 1” Cordless Impact MIL-2769-22 (Kit) MIL-2769-20 (Bare Tool)
Wrench $69999◉ $39999◉

• Up to 1,500ft-lbs Fastening, 1,800ft-lbs M12 FUEL™ Right Angle Impact Wrench BMoIoLt -fo4r 925-6146/2-5265564
Nut Busting Torque $2999
• Delivers up to 220 ft-lbs. of nut-busting torque
• Up to 25% repeatable torque output with • A 2.2” head profile design allows for more access in
One-Key enabled
tight spaces
• Kit includes: (2) 8.0Ah M18™ High Output • LED light to illuminate the work area
Batteries (48-11-1880) and M18™ & M12™
Rapid Charger (48-59-1808) MIL-2564-20 3/8” Bare Tool
MIL-2565-20 1/2” Bare Tool
Bare Tool 2 Battery Kit $23999◉
MIL-2564-22 3/8” 2 Batt Kit
MIL-2867-20 MIL-2867-22 MIL-2565-22 1/2” 2 Batt Kit
$89999◉ $1,19999◉ $35999◉

M18 FUEL™ 1/2” GENII Impact MBoIoLt -fo4r 927-6176-2767 M12 FUEL™ Stubby 2555-20 - 1/2” Impact BMoIoLt -fo4r 925-5146/2-5255554
Wrench Kit $4499 Impact Wrench Kits Wrench

• Max Torque: 1000 ft-lbs & 1,400 ft-lbs nut • Features: 3 RPM Settings ,4th
busting torque mode for precision fastening &
• Impacts: 0-950 / 1,750 / 2,300 ipm automatic shut-off
• No Load Speed: 0-550 / 1,400 / 1,750 rpm • Max Torque: 250 ft-lbs $1999
• Kit includes: Bare Tool, (2) 5.0Ah 2552-20 - 1/4” Impact • Impacts: 3,200 ipm
Batteries, Charger, Case Bare Tool Wrench Kits Include: Tool, (2) Batteries
• Max Torque: 100 ft-lbs • (2.0Ah & 4.0Ah), Charger &
MIL-2767-22 MIL-2767-20 Kit Bag
MSRP $790.00 MSRP $414.00
$59999◉ $31999◉ • Impacts: 4,000 ipm
2554-20 - 3/8” Impact
Wrench
• Max Torque: 250 ft-lbs
M18 FUEL Mid Torque • Impacts: 3,200 ipm
Impact Wrench
1/4” MIL-2552-22
• More power in a smaller size! 3/8” MIL-2554-22
• 2,575 max rpm 1/2” MIL-2555-22
• Kits Include (2)5.0Ah Batteries, $31499◉

Charger, and Case

PART DESCRIPTION PRICE M12 Fuel™ Surge
MIL-2960-20 3/8” Bare Tool $249.99◉ Hydraulic 1/4” Driver
MIL-2960-22 3/8” Kit - 600 ft/lbs $574.99◉
MIL-2962-20 1/2” Bare Tool $249.99◉ • FLUID-DRIVE Hydraulic Powertrain™
MIL-2962-22 1/2” Kit - 650 ft/lbs $499.99◉ delivers up to 2X less noise and vibration
MIL-2960-22CT 3/8” Kit - 2.0Ah Batt $419.99◉ than standard impact drivers

M18 FUEL Compact Impact • 450 in-lbs of longer sustained torque
Kit Includes: Bare Tool, (2) 2.0Ah Batteries,
Charger, and Kit Bag

MIL-2551-22 (Kit)
$24999◉
MIL-2551-20 (Bare Tool)
$17999◉

Wrench M18 FUEL™ 1/4” Hex
• 250 ft-lbs of torque Impact Driver Kits

• 2,400 max rpm • Max Torque: 2,000 in-lbs
• Impacts: 0-4,300 ipm
MIL-2854-20 3/8” Bare Tool • No Load Speed: 0-3,600 rpm
MIL-2855-20 1/2” Bare Tool • Kits Includes: (2) Batteries &
$23999◉
MIL-2854-22 3/8” Kit Charger & Kit Box
MIL-2855-22 1/2” Kit
$47999◉ MBoIoLt -fo4r 928-5146/2-8258554 MIL-2853-20 (Bare Tool)
$18499◉
$3999 MIL-2853-22CT (2.0Ah Kit) MBoIoLt -fo4r 928-5136-2853
$32499◉ $3999
MIL-2853-22 (5.0Ah Kit)
$42999◉

Tool News | October-December 2021 5

Power Tools M12 FUEL™ High Speed Ratchets MBoIoLt -fo4r 925-6166/2-52657 67 M12 Fuel™ 1/4” Driver

• Delivers 450 RPM for best-in-class productivity • 4-Mode Drive Control
• Pneumatic ratchet performance with up to 35 $2999 • 1,300 in-lbs fastening torque
ft-lbs max torque Kit Includes: Bare Tool, (2) 2.0Ah
• Compact head design and recessed shift knob Batteries, Charger, and Kit Bag
provide users with more access in tight spaces
MIL-2553-22 (Kit)
MIL-2566-20 1/4” Bare Tool $22999◉
$19999◉ MIL-2553-20 (Bare Tool)
MIL-2566-22 1/4” Kit $16999◉
$29999◉
MBoIoLt -fo4r 925-5136-2553
MIL-2567-20 3/8” Bare Tool $2499
$19999◉
MIL-2567-22 3/8” Kit
$29999◉ M18 FUEL™ 1/2” Drill / Driver Kit

M12 FUEL™ Ratchets • No Load Speed: 0-550 / 0-2,000 RPM
• Peak Torque: 1,200 in-lbs
• Kits Include: Bare Ratchet, (1) Battery, • Includes: (2) REDLITHIUM™ XC 5.0Ah
Charger, Protective Boot, Reducer* & Kit Bag.
Batteries, Charger & Blow-Molded Case
*2556-21 comes with a 1/4” to 3/8” adapter
MIL-2803-22
BMoIoLt -fo4r 925-5176-2557 $39999◉
$2999
MIL-2803-20 (Bare Tool)
$16999◉

PART DESCRIPTION PRICE M18 FUEL Hammerdrill/
MIL-2557-20 3/8” Bare Tool $209.99◉ Impact Driver Combo Kit
MIL-2557-21 3/8” Kit - 55 ft/lbs $294.99◉
MIL-2558-20 1/2” Bare Tool $234.99◉ 2804-1/2” Hammerdrill
• 1,200 in-lbs of torque
M12 Fuel™ Extended MBoIoLt -fo4r 925-5196-2559 • 2,000 rpm
Reach Ratchets 2853-1/4” Impact Driver
• 2,000 in-lbs of torque
• 3,600 max rpm

MIL-2997-22
$56999◉

• Slim head profile and extended $2999 M12™ Cordless Rotary Tool M12 Low Speed Tire Buffer
neck provide users with the MBoIoLt -fo4r 925-6106-2560
longest reach in tight spaces • Free Speed: 5,000 - 32,000 rpm • Dedicated buffing and drilling 2-Mode
• 1/4” ratchet performs with up to $2999 • Collet: 1/8” Drive Control™ avoids costly mistakes
• Variable Speed Dial for maximum control and performs more consistent flat repairs
40ft-lbs max torque
• 3/8” ratchet performs with up MIL-2460-20 • Drilling Mode: 1,200 RPM
to 55ft-lbs max torque (Bare Tool) • Buffing Mode: 2,500 RPM
$9999◉
• Kit Includes: Bare Tool, (1) MIL-2409-20 Bare Tool

Battery, Charger, and Kit Bag $19999
MIL-2409-22 Kit

$32999

PART DESCRIPTION PRICE M12 FUEL™ 3” Compact Cut Off Tool
MIL-2559-20 1/4” Bare Tool $279.99◉ • 20,000 rpm
MIL-2559-21 $374.99◉ • Brushless Motor
MIL-2560-20 1/4” Kit $269.99◉ • Includes:
MIL-2560-21 3/8” Bare Tool $359.99◉ (1) 3” Carbide Abrasive Blade
(1) 3” Diamond Tile Blade
3/8” Kit (1) Blade Wrench
(1) Metal Cut Off Wheel
(1) 7/16” Flange Adapter
(1) Shoe Guard
M12 Fuel™ Die Grinders Kit Includes: (1) 4.0Ah Battery, Charger, and Kit bag
MIL-2522-21XC (Kit) MIL-2522-20 (Bare Tool)
• 0.3 HP Motor Output $23999◉ $16499◉
• More powerful than pneumatic
M12™ Variable Speed
die grinders Polisher/Sander
• The most compact cordless die
• Free Speed: 8,300 rpm
grinder • Variable Speed Trigger
• Get up to 10 mins continuous • Includes side handle

runtime on one 2.0 battery MIL-2438-22X
• 4-Mode RPM Control, up to $24999◉
MIL-2438-20 Bare Tool
24,500RPM $17999◉
Kit Includes: Bare Tool, (2) 2.0Ah M12™ Compact Inflator
Batteries, Charger, and Kit Bag
• 5X the fill speed on car and light truck tires
MBoIoLt -fo4r 924-8156-2485 compared to corded and cordless units
$3999
• Kit Includes: 26” hose, (3) attachments:
PART DESCRIPTION PRICE ball inflation needle, inflatable nozzle &
MIL-2485-20 Right Angle Die Grinder Bare Tool $199.99◉ presta chuck, (1) REDLITHIUM™ 4.0Ah
MIL-2485-22 $299.99◉ XC Battery & Charger
MIL-2486-20 Right Ange Die Grinder Kit $199.99◉
MIL-2486-22 Straight Die Grinder Bare Tool $299.99◉ MIL-2475-21XC

Straight Die Grinder Kit MSRP $266.00

$17999◉

6 Tool News | October-December 2021

TOOL NEWS Exclusive 20v MAX XR 1/2” & 3/8” Impact Power Tools
DeWalt Promotions Wrench Combo Kit
Kit Includes:
Available While Supplies Last DCF899HB - 1/2” High Torque Brushless Impact Wrench
• Max Torque: 700 ft-lbs & 1,200 ft-lbs break away torque
• Impacts: 0-2,400 ipm
20v MAX 1/2” Compact • No Load Speed: 0-400 / 1,200 / 1,900 rpm
Impact Wrench DCF883B - 3/8” Brushless Impact Wrench
• Max Torque: 1,560 in-lbs
• Max Torque: 152 ft-lbs • Impacts: 0-2,700 ipm
• Impacts: 0-2,700 ipm • No Load Speed: 0-2,300 rpm
• No Load Speed: 0-2,300 rpm DCL050 - Jobsite Worklight
• Includes: (2) 4.0Ah MAX Batteries, (2) 4.0Ah XR Batteries, Fast Charger & Kit Bag

Charger, Built-In LED & Kit Box. FREEDWA-DCK398HM2

DWA-DCF880HM2 MSRP $1129.99

MSRP $731.93 $72999◉
20V MAX XR Drill/ $217
$33999◉ 20v MAX XR 3/8” Driver Value!
Brushless Compact DWA-DCD791BX
FREE
20V MAX 1/4” Impact $195 Impact Wrench
Driver Value! • Max Torque: 150 ft-lbs
DWA-DCF885BX • Impacts: 0-3,200 ipm

1/2” High Torque Impact • No Load Speed: 0-2,800 rpm
Wrench Kit • Includes: DCF890B Tool, (2)
FREE4.0Ah XR Battery, Charger & Bag
• Up to 700 ft-lbs of max torque and 1200 DWA-DCF890M2
ft-lbs of max breakaway torque MSRP $846.19
$39999◉
• Compact design of 8-13/16 in. length and 20V MAX XR Drill/
weighs only 6.0 lbs Driver $217
DWA-DCD791BX Value!
• Multi-speed control for a variety of
applications (0-400/ 1,200/ 1,900 RPM) 20V MAX XR Brushless 1/2”
Compact Drill / Driver Kit
• 1/2 in. Anvil with hog ring • Max Power: 460 UWO
• Includes: Bare Tool, (2) 5.0 Ah batteries, (1) • 2-Speed Transmission: 0-600 / 2,000 rpm
• Includes: (2) 2.0Ah Batteries, Charger & Case
Charger

DWA-DCF899HP2

$54999◉

20V MAX 1/2” Compact Drill / FREEDWA-DCD791D2
Driver Kit
MSRP $378.64
• Max Power: 350 UWO
• 2-Speed Transmission: 0-600 / 2,000 rpm $24999◉
• Includes: (2) 1.5Ah Batteries, Charger & 20V MAX 1/4” Brushless $195
Impact Driver Value!
Kit Bag DWA-DCF887BX

DWA-DCD780C2 $195 20v MAX XR Impact & Grease Gun Combo Kit
Value!
MSRP $378.64 Kit Includes:
DCF899HB - 1/2” High Torque Brushless Impact Wrench
FREE$24999◉ • Max Torque: 700 ft-lbs & 1,200 ft-lbs break away torque
20V MAX 1/4” Brushless • No Load Speed: 0-400 / 1,200 / 1,900 rpm
Impact Driver DCGG571B - High Volume Grease Gun
DWA-DCF887BX • Delivers 10,000 Max Psi.
DCL043 - Jobsite work light
18v to 20v Power Converter
FREE(2) 4.0Ah XR Batteries, Charger, & Bag
• Compatible with MOST 18v DeWalt Tools.
• Allows for use of most 20v Batteries in 18v Tools. DWA-DCK397HM2

DWA-DCA1820 Total Value $1,318.99

MSRP $72.75 $67999◉

$5499 20V MAX Angle
Grinder Bare Tool
DWA-DCG413BX

IQV20 Next Gen 1/2” Drive 20V 1” Cordless D Handle Impact Wrench
High-Torque Impactool™
World’s Most Powerful 1” Cordless Impact Wrench
• Features: Brushless Motor, Shadowless with best in class power-to-weight ratio
LED light ring, 4 power control modes • 3,000 ft-lbs of nut busting torque, 2,200 ft-lbs of
and is only 8.1” long & 7.6lbs!
tightening torque
• Max Torque: 1,000 ft-lbs & 1,500 ft-lbs • IP56 rated for tough environmental conditions
nut-busting torque! • PRODUCTIVITY: 250 bolts per charge – tackle a full

• Kit Includes: W7152 Tool, 5.0Ah day’s worth of work
Battery, Charger & Kit Bag
ING-W9691-K4E

$1,79999◉

FREE Protective Boot $225 20v Right-Angle FREE $140
W7152-BootX Value! Impactool™ Value!
10pc Universal 20V 2.5Ah Battery
Deep Impact Set • Max Torque: 180 ft-lbs BL2012X
KTP-4440SP • Impacts: 3,000 ipm
• Max Free Speed: 1,900 rpm
PART
ING-W7152-K22 DESCRIPTION PRICE PART DESCRIPTION PRICE
5.0Ah, 2-Battery Kit $559.99◉
ING-W5330-K12 3/8” Right-Angle Impactool™, 1-Battery Kit $499.99◉

ING-W5350-K12 1/2” Right-Angle Impactool™, 1-Battery Kit $519.99◉

Tool News | October-December 2021 7

Power Tools CORDLESS BATTERIES CORDED ELECTRIC
AND CHARGERS
Bench Grinders Grinder Stand
6” SUN-5003
DWA-DW756
• For use with 6” & 8” Grinders.
• No Load Speed: Stands 36” Tall and comes with
3,450 RPM pre-drill holes for floor mounting.

$14999◉ MSRP $152.75

FREE $11999

6” Wire Wheel
DWA-DW4904X

8”
DWA-DW758

• No Load Speed:
3,600 RPM

$19999◉

FREE

8” Wire Wheel
DWA-DW4906X

41/2” Small Angle Grinders

DWA-DWE402 DWA-DWE4011 Buy either angle

• 11amp w/1.8hp Motor • 7amp w/1.14hp Motor FREEgrinder, get a
• Paddle Switch • Slide Switch
• No Load Speed: 11,000 RPM • No Load Speed: 12,000 RPM Carbon Fiber Knife
MSRP $148.98 MSRP $117.64 DWA-DWHT10314X

$11999◉ $7999◉

PART DESCRIPTION PRICE
$79.99◉
MIL-48-11-2420 2.0Ah 12v Battery $89.99◉
$119.99◉
MIL-48-11-2430 3.0Ah 12v Battery $129.99◉
$119.99◉
MIL-48-11-2440 4.0Ah 12v Battery $134.99◉
$169.99◉
MIL-48-11-2460 6.0Ah 12v Battery $299.99◉
$199.99◉
MIL-48-11-1820 2.0Ah 18v Battery $199.99◉ 14” Abrasive Chop Saw FREE
$299.99◉
MIL-48-11-1835 3.0Ah 18v HIGH OUTPUT Battery $79.99◉ • No Load Speed: 4000 RPM 14” Chop Saw
$79.99◉ Wheel
MIL-48-11-1850 5.0Ah 18v Battery $159.99◉ DWA-D28730 DWA-DW8003X
$199.99◉
MIL-48-11-1852 5.0Ah 18v Battery 2-Pack $399.99◉ MSRP $368.36

MIL-48-11-1865 6.0 Ah 18v Battery $29999◉

MIL-48-11-1880 8.0Ah HD 18v Battery 11amp Variable Speed 7”
Polisher / Sander
MIL-48-11-1812 12.0Ah HD 18V Battery
• Dial Speed Control: 1000-3000 rpm
MIL-48-59-1812 12v-18v Charger • Includes Hook & Loop disk, Polishing

MIL-48-59-1808 12v-18v Rapid Charger Bonnet, and Rubber Pad

MIL-48-59-1810 12v-18v Field Charger TIT-22530
$13999◉
MIL-48-59-1811 12v-18v Super Charger

MIL-48-59-1852P 5.0Ah 18v Starter Kit

M18™ TOP-OFF™ 175W M18 Cordless 7” Polisher Random Orbital
Power Supply Buffer / Polisher
• Variable Speed: 0-2,200 rpm TIT-22610
• Ideal for laptops, cellphones, TVs, • Includes (1)Backing Pad (1)Screen
and other small devices • Motor: 0.92amp,
Cover (1)Side Handle 3,000rpm
• Includes USB-C port, USB-A port,
and 120V AC Outlet MIL-2738-20 $4499
$28999◉
**Battery not included** MIL-2738-21
$46999◉
MIL-2846-20
$12999◉

8 Tool News | October-December 2021

“Thor” 1/2” Impact 231 SERIES - QUIET Composite 1/2” 3/8” Titanium Impactools™ Power Tools
Wrench Super-Duty Impactools™
1/2” Impactool™ • Max Torque: 300 ft-lbs
Designed to be the highest • Max Torque: 780 ft-lbs & 1,100 • Free Speed: 15,000 rpm
performing 1/2” impact wrench • Max Torque: 590 ft-lbs ft-lbs nut-busting torque
on the market • Free Speed: 8,000 rpm ING-2115TiMAX
• Rated 940 ft-lbs traditional Max • Free Speed: 11,000 rpm
ING-231C • Impacts: 1,250 ipm MSRP $381.00
Torque (compare to 1,600 ft-lbs
nut-busting or bolt-breakaway) MSRP $229.00 ING-2135QXPA $24999◉

AST-1894 $15999◉ MSRP $402.00 FREE

$19999◉ $26999◉ Protective Boot
2115MBootX
ING-231H FREE FREE
3/8” Impactool™
MSRP $255.00 Protective Boot Protective Boot
231BootX w/231C,231H 2135MBootX • Max Torque: 150 ft-lbs
$17499◉ • Free Speed: 10,200 rpm
QUIET Composite 3/8”
Titanium Series 1/2” Impactools™ Impactools™ ING-212

• Max Torque: 930 ft-lbs & 1,350 ft-lbs nut-busting torque. • Max Torque: 300 ft-lbs MSRP $276.00
• Free Speed: 8,500 rpm • Free Speed: 15,000 rpm
• Impacts: 1,220 ipm • Impacts: 1,500 ipm $19999◉

High-Viz ING-2115QXPA Snub Nose Impact
Lime Green! $21499◉ Wrench
AST-1822 (1/2”)
BUY ANY 2235TiMAX AND GET A Now in Red FREE
• Max Torque: 450 ft-lbs
FREE Protective Boot • Free Speed: 10.000 rpm
2115MBootX MSRP $180.00
Protective Boot
2235MBootX Nano Angle $11999◉
Impact Wrench

• Industry leading 415 ft/
lbs. of MAX torque

• Free Speed: 9000 r.p.m.

AST-1832 (1/2”)
AST-1838 (3/8”)
$14999◉

WITH 2” FREE “Snub-Nose” Impact
EXTENDED ANVIL Wrenches
1/2” Drive Flip Sockets
13/16”x3/4”&17mmx19mm • Free Speed: 9,000 rpm
FDS426X/FDM419X
CPT-7731C (3/8”)
PART DESCRIPTION PRICE
ING-2235TiMAX • Max Torque: 346 ft-lbs
ING-2235TiMAX-G TITANIUM Impactool™ $349.99◉
ING-2235TiMAX-R CPT-7732C (1/2”)
ING-2235QTiMAX TITANIUM Impactool™ in Hi-Viz Green $349.99◉
ING-2235QTiMAX-2 • Max Torque: 460 ft-lbs
TITANIUM Impactool™ in Red $349.99◉ MSRP $257.03

TITANIUM Impactool™ Quiet $399.99◉ $17999◉

TITANIUM Impactool™ Quiet 2” Anvil $429.99◉ Ultra-Compact Impactools™ ING- 36QMAX (1/2”)
ING-15QMAX (3/8”)
1/2” Heavy Duty Impact • Max Torque: 470 ft-lbs
Wrenches • Quiet Technology • Free Speed: 8,000 rpm
• Max Torque: 380 ft-lbs MSRP $254.00
• Max Torque: 960 ft-lbs & • Free Speed: 8,000 rpm
1,400 ft-lbs Take-off MSRP $254.00 $17999◉

• Free Speed: 7,000 rpm $17999◉
• Impacts: 1,350 ipm

CPT-7748

MSRP $331.66

$19999◉

2” Anvil FREE FREE
CPT-7748-2
Protective Boot Protective Boot
MSRP $341.96 35BootX 35BootX

$26999◉ 3/8” Butterfly Wrench 3/8” Butterfly Impact Wrench

FREE FREEFREE WITH 7748-2 • Max Torque: 90 ft-lbs • Max Torque: 75 ft-lbs
1/2” Torque Wrench 1/2” Drive Flip Sockets • Free Speed: 9,500 rpm
CP8915X 13/16”x3/4”&17mmx19mm AST-136E
FDS426X/FDM419X CPT-7722 $6999

MSRP $275.47

$19999◉

9Tool News | October-December 2021

Power Tools Ultimate Impactools™ w/ RATCHETS
QUIET Technology
105-D2/105-D3 107XP/1077XP
• Max Torque: 1,350 ft-lbs
• Free Speed: 7,000 rpm • Torque: 25 ft-lbs • Torque: 54 ft-lbs
• Patented one-hand forward/reverse • Free Speed: 250 rpm • Free Speed: 160 rpm

control for easy operation
• Optimized air flow for maximized

performance

FREE Socket Set
SK6H8LNX
w/2145QiMAX and
Protective Boot
2145MBootx 109XP/1099XP FREE With
107XP/1077XP
PART DESCRIPTION PRICE • Torque: 76 ft-lbs 109XP/1099XP
ING-2145QiMAX 3/4” Drive $649.99◉ • Free Speed: 220 rpm Protective Boot
ING-2155QiMAX 1” Drive $739.99◉ 107BootX/109BootX

3/4” Heavy Duty 3/4” Impactools™ PART DESCRIPTION PRICE
Impactools™ ING-105-D2 1/4” MINI Ratchet $134.99◉
• Max Torque: 1,050 ft-lbs ING-105-D3 3/8” MINI Ratchet $129.99◉
• Max Torque: 1,200 ft-lbs • Free Speed: 6,000 rpm ING-107XP 3/8” Heavy Duty Ratchet $109.99◉
• Free Speed: 5,500 rpm ING-1077XP 1/2” Heavy Duty Ratchet $139.99◉
ING-259 ING-109XP 3/8” High Torque Ratchet $199.99◉
ING-261 ING-1099XP 1/2” High Torque Ratchet $214.99◉
MSRP $616.00
MSRP $830.10
$45999◉
$54999◉
FREE
FREE
Protective Boot
Protective Boot 259BootX
261Bootx

Socket Set
SK6H8NX

3/4” HD Impact 3CR/aP8tTc”-h8Se8tta6ndard
Wrench
• Torque: 50 ft-lbs
• Max Torque: 1,440 ft-lbs • Free Speed: 270 rpm
• Free Speed: 7,000 rpm
$9999◉
CPT-7769
3/8” Mini AST-1128
MSRP $931.04 Ratcheting Wrench
MSRP $187.10
$62999◉ • Torque: 50 ft-lbs
• Free Speed: 700 rpm $11999◉
3/4” Impact Wrench 3/4” Compact Impact
Wrench DRILLS
• Max Torque: 1,200 ft-lbs
• Free Speed: 6,300 rpm • Max Torque: 1,050 ft-lbs 7802RA 7803RA 7807R
• Free Speed: 4,850 rpm • 0.5hp motor • Free Speed: 500 rpm
CPT-7763 • Free Speed: 2,000 rpm • Reversible Motor
CPT-7762 • Free Speed:
MSRP $768.00
MSRP $855.14 1,800 rpm
$54999◉
$39999◉
1” Impact Wrenches
1” H.D. Impactool™ 1” Pistol Grip Impact
Wrench
• Max Torque: 1,700 ft-lbs
• Free Speed: 5,000 rpm • Delivers 2,000 ft lbs of reverse torque
• Weighs in under 20lbs!
ING-295 • 360° adjustable handle

Total Value $1,229.00 ING-2175MAX

$76999◉ MSRP $1160.00

$89999◉

ING-285B-6 CPT-7782-6 PART DESCRIPTION PRICE
ING-7802RA 3/8” Reversible Drill Geared Chuck $179.99◉
• Max Torque: 1,770 ft-lbs • Max Torque: 1,920 ft-lbs ING-7803RA 1/2” Reversible Drill Geared Chuck $254.99◉
• 1,000 ft-lbs in 2 sec with • Free Speed: 5,200 rpm ING-7807R $129.99◉
• 25lbs 3/8” Angled Reversible Drill
FAST-Torque™
• Free Speed: 5,000 rpm ING-2850MAX-6 7300C 879C
• Free Speed: 2,800 rpm • Free Speed: 1,800 rpm
FREE• 28lbs • Max Torque: 2,100 ft-lbs
Socket Set • Free Speed: 5,500 rpm
SK8C5TNX w/285B-6 • 22lbs

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
ING-285B-6 1” Impactool™ $659.99◉ CPT-7300C 1/4” Mini Drill $149.99◉
ING-2850MAX-6 1” High-Torque Impactool™ $899.99◉ CPT-879C 3/8” Standard Angled Drill $129.99◉
CPT-7782-6 1” High-Torque Impact Wrench $679.99◉
ING-285BS-6 5 SPLINE Drive $849.99◉

10 Tool News | October-December 2021

DIE GRINDERS 876 9160 Power Tools

• Free Speed: 30,000 rpm • Blows: 32,400 bpm
• 0.30 HP Motor • 6.5ft Hose
• 1/4” & 6mm collets
860 (classic) 872 875

• Free Speed: 24,000 rpm • Free Speed: 22,000 rpm • Free Speed: 22,500 rpm
• 0.54 HP Motor • 0.60 HP Motor • 0.30 HP Motor

See Page 13 for Accessories/Replacement Parts

PART DESCRIPTION PRICE
$144.99◉
CPT-860 Classic HD Die Grinder $89.99◉
$84.99◉
NEW 1/4” Die Grinders CPT-872 Standard Duty Die Grinder $79.99◉
$164.99◉
.34 HP .34 HP 60° .34 HP 90° CPT-875 Mini 90 Angled Die Grinder $119.99◉
CPT-7406 $134.99◉
CPT-7405 CPT-7408 CPT-876 Mini Straight Die Grinder $159.99◉
$134.99◉
CPT-9160 Engraving Pen $174.99◉
$299.99◉
CPT-7405 0.34 HP Composite Die Grinder

.34 HP Long .56 HP .56 HP Long CPT-7406 0.34 HP Composite 90° Die Grinder
CPT-7410 CPT-7411 CPT-7412
CPT-7408 0.34 HP Composite 60° Die Grinder

CPT-7410 0.34 HP Composite Long Die Grinder

CPT-7411 0.56 HP Composite Die Grinder

CPT-7412 0.56 HP Composite Long Die Grinder

301B 302B 307B 308B 301B-3MK

• Free Speed: 21,000 rpm • Free Speed: 18,000 rpm • Free Speed: 28,000 rpm • Free Speed: 25,000 rpm • (8) 3” Pads & Holder
• 0.25 HP Motor • 0.33 HP Motor • 0.25 HP Motor • 0.33 HP Motor

5102MAX 5108MAX

• Free Speed: 20,000 rpm • Free Speed: 25,000 rpm
• 0.40 HP Motor • 0.40 HP Motor

See Page 13 for Accessories/Replacement Parts

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
$69.99◉ ING-308B HD Composite Straight Die Grinder $94.99◉
ING-301B 90° Angle Die Grinder $149.99◉ ING-5102MAX $179.99◉
$119.99◉ ING-5108MAX MAX 90° Angle Die Grinder $169.99◉
ING-301B-3MK 301B 3” Surface Prep Kit $64.99◉ MAX Straight Die Grinder

ING-302B HD 90° Angle Die Grinder

ING-307B Straight Die Grinder

218 T20AH AST-233 Reversible Cut-Off Tool High-Speed Cut-Off Tool

• Free Speed: 56,000 rpm • Free Speed: 20,000 rpm • Free Speed: 52,500rpm • Free Speed: 20,000 rpm • Free Speed: 22,000 rpm
• 0.33 HP Motor • Wheel Diameter: 3” • Wheel Diameter: 2-7/8” (73mm)
• Comes w/(5) Cut-Off Wheels
CPT-874
ING-426
MSRP $118.94
MSRP $135.70
$7999◉
$9999◉

See Page 13 for Accessories/Replacement Parts ONYX Cut-Off Tools Extended Length Cutting Tool
AST-409
PART DESCRIPTION PRICE • Free Speed: 14,000 rpm
• Free Speed: 14,000 rpm • Wheel Diameter: 2-7/8” (73mm)
AST-218 1/8” Pencil Grinder $54.99 • Wheel Diameter: 4”
MSRP $126.38 CPT-9116
AST-233 1/8” 95° Pencil Grinder $114.99◉
$9999 MSRP $390.30

AST-T20AH 90° Angle Die Grinder $59.99 $26999◉

See Page 13 for Replacement Parts

MAX Grinder Reciprocating Saws Low Vibration ONYX Gear Driven Heavy Duty Air Saw
ING-429 AST-930
• Free Speed: 12,000 rpm • 250% more cutting capacity than standard air saws
• 0.88 HP Motor • Strokes: 10,000 spm • Strokes: 9,500 spm • Cut quicker and thicker up to 1/4” (6.4mm) mild steel
MSRP $160.80 MSRP $112.51 • Accepts universal 1/2” shank standard saw blades
ING-3445MAX (4.5”)
$9999◉ $8499 •A SStrTo-ke9s3p6er Minute: 7,000
MSRP $432.20 $16999◉

$34999◉

See Page 13 for Replacement Parts 11

Tool News | October-December 2021

Power Tools Nut Setter AST-PR36 AST-PR14 Riveters Heavy-Duty Nibbler
AST-PRN1(3/8” rivets) CPT-9882 AST-727
• Includes (4) nose pieces • Includes (5) nose pieces
• Includes (8) nose pieces: 3/16”, 5/32”, 3/32”, 1/8” 3/16”, 5/32”, 1/4”, 3/32”, • Includes (4) nose pieces • Up to 17 Gauge
M4, M5, M6, M8, 1/4”, 1/8” 3/32”, 1/8”, 5/32”, & 3/16” • Free Speed: 3,500 CPM
5/16”, 3/8” MSRP $147.43 MSRP $94.28
MSRP $184.00 MSRP $224.22
MSRP $390.50 $11499 $7499
$12499 $16999◉
$24999◉

Caulking Gun Punch/Flange Tools Punch Diameter: 8mm (5/16”)

• 8-1/4” long w/an inside diameter of 2” • Performs hole punching & crimping AST-608PT (Pistol)
• Air Pressure: 40-90psi • Crimping & Punch Capacity: (1/16”) AST-608ST (Straight)

AST-405 MSRP $144.09
$2999
$10999

Needle Scalers Weld Flux Chipping ING-125 Pistol Grip
MINI Hammer
• 4,600 BPM • 2 Sets of Needles; 19”x1/8” & 29”x5/64”
• 12” x 1/8” Steel Needles • 19”x1/8” Steel Needles MSRP $301.00 • 4,800 BPM
• 4,000 BPM • 4,800 BPM
$19999◉ CPT-7125
CPT-7115 CPT-7120 115
MSRP $304.70
MSRP $278.37 MSRP $334.59
$21999◉
$18499◉ $22499◉
See Page 13 for Replacement Parts
7111 7150
119MAXK
w/quick change 121

See Page 13 for Accessories 116 123MAX
121K6
PART DESCRIPTION PRICE
CPT-7111 3,500 BPM Economy Hammer $74.99◉ 117
CPT-7150 2,100 BPM Heavy Duty Hammer $89.99◉

ONYX Air Belt Sanders See Page 13 for Accessories

• Free Speed: 16,000 rpm PART DESCRIPTION PRICE
• Variable Speed Control ING-115 Short 5,000 BPM Hammer $64.99◉
• (3) Grinding Belts: 40, 60, & 80 grit ING-116 $69.99◉
ING-117 3,500 BPM Hammer $84.99◉
AST-3036 ING-121 2,000 BPM Long Stroke Hammer $134.99◉
ING-121K6 3,000 BPM Super-Duty Hammer $134.99◉
Belt: 3/8”x13” ING-119MAX $184.99◉
ING-119MAXK 121 Kit $199.99◉
$9999◉ ING-123MAX 2,500BPM Long Barrel Hammer $179.99◉
ING-123MAXK $199.99◉
AST-3037 2,500BPM Long Barrel Kit
3,500BPM Short Barrel Hammer
• Belt: 1/2”x18”
3,500BPM Short Barrel Kit
$11999◉

ONYX Micro 2” A(rSaTn-d3o2m1 orbit) Mini Disc Polisher Kit
Orbital Sander $12999◉
• Free Speed: 2,500 rpm
• Free Speed: 16,000 • Pad Size: 3”
• Access to smaller, confined spaces • Spindle Thread: 1/4” x 20
• Ensures a better finish w/3mm orbit • Includes: (1) 3” backing pad
• Spindle: 5/16”- 24 (Female)
(2) 3-1/2” foam pads

CPT-7201P
$14999◉

12 Tool News | October-December 2021

SANDERS 7255 7268 High Speed Sander Power Tools

7200S • Free Speed: 12,000 rpm • Free Speed: 25,000 rpm • Free Speed: 18,000 rpm
• 3/16” Orbit • Includes 3” & 4-1/4” Backing Pads.
• Includes: (1) 2” and 3” backing pads,
(10) 2” 320, 400 and 600 grit sand paper AST-222S

• Free Speed: 15,000 rpm MSRP $54.08
• Pad Size: 2” & 3”
• Spindle Thread: 1/4” x 20 $3999

870 6” DAQ Sander

• Free Speed: 10,000 rpm Dual-Action-Quiet
• Spindle Thread: 5/8”x11 Performance
• Free Speed: 9,000 rpm
PART DESCRIPTION PRICE • Spindle Thread: 5/16”x24
CPT-870 6” Dual Action Sander $79.99◉
CPT-7200S Mini Random Orbital Sander Kit $159.99◉ AST-300SP
CPT-7255 $214.99◉
CPT-7268 6” Orbital Sander $174.99◉ MSRP $82.87
Twin Piston Straight Line Sander
$6499

311A 315 317A PART DESCRIPTION PRICE
ING-311A 6” Dual Action Sander $84.99◉
• Free Speed: 12,000 rpm • 3,000 strokes per minute • (2) back pads: 3” & 5” ING-315 Twin Piston Straight Line Sander $134.99◉
• 3/16” orbit for finishes • Belt Size: 2.75”x17.5” • Free Speed: 18,000 rpm ING-317A High Speed Piston Sander $84.99◉
ING-328B 8” Dual Action Sander $149.99◉
ING-4151 Vacuum-Ready Random Orbital Sander $169.99◉

328B 4151 5pc Pneumatic
Pilot Punch Set
• Free Speed: 825 rpm • Free Speed: 12,000 rpm
• Dual-action pad motion • Pad Size: 6” • Includes: 1/4”, 5/16”, 3/8”, 7/16”, & 1/2”
All sizes available Separately
w/ 5/32” orbit • Orbital diameter: 3/16” 7pc Pneumatic Fan
Clutch Wrench Set MAY-32020

• Use w/Air Hammer MSRP $93.04

LIS-43300 $7499

MSRP $209.95 Replacement
Needles
$17999
• 9pc Replacement
8pc Set Air Hammer Springs Needle Set
Quick Change Spring
• Includes: (4) cylindrical, (2) tree, & (2) ball ING-PF2219-22-19
• Retains Chisels w/.401” Parker $1999
SGS-BK8 Shanks
Arbor for Cut-Off Wheels
MSRP $187.30 TOO-94000
$499 • Turn a Die Grinder or Drill
$16999◉ into a Cut-Off Tool
Retain-It 2pc
All shapes and sizes Safety Device TOO-94950
available indivudually $599
Carbide Burr Sets • Collar fits against stop on
8pc Double Cut Standard .401” Parker shank chisels Cut-Off Wheels
for 100% contact
• Includes: (4) cylindrical, (2) tree, & (2) ball • 3/8” Arbor Hole
TOO-94100 • 25,000 rpm MAX
AST-2181 $1599
W1/16h”exe3l”s Cut-Off
MSRP $11799 TOO-94860 (5pc)
$999
$8999 100pc 1/16”x3” Cut-Off Wheel Tray
AST-CW3100
5pc Double Cut 5pc Pneumatic
Extra Long Shank Chisel Kit MSRP $126.97

• Includes: (2) cylindrical, • Includes: edging tool, tail pipe $9999
(2) tree, & (1) ball cutter, straight chisel. cutting
chisel, & punch Replacement Saw Blades
• 4.5” OAL 6pc Packages
ING-9500 ING-P4CS-6 (24tpi)
AST-2185 $2499 ING-P4FS-6 (32tpi)
$1799
MSRP $117.25 Tool News | October-December 2021

$8999

13

Shop Equipment DROP SHIP ITEMS Electric-Driven Single-Stage Electric-Driven Two-Stage
Air Compressor Air Compressors
FREE DROP SHIP FOR MOST PRODUCTS
CALL FOR PRICE AND AVAILIBILITY
All Season Compressor Oil Two-Stage Gas-Powered Air
• Increase efficiency, reduce wear & prevent Compressor
carbon buildup.
• Performs 4x’s longer than petroleum-based
lubricants.
*Available in cases of 12

ING-38436739-1
$3499

ING-2475F13GH

ING-SS5L5 ING-2475N5V

Flexzilla® Pro Quiet Technology™
Air Compressors

• Flexzilla® air compressors are the quietest
on the market with the Silencer™ noise
suppresison system

Flexzilla® Pro 7.5HP, Flexzilla® Pro 10HP,
80 Gallon 1-Phase, 80 Gallon 1-Phase,
2-Stage Vertical 2-Stage Vertical
LEG-FXS07080V1 LEG-FXS10V080V1

$419999◉ $439999◉

M18 Cordless 2 Gallon Electric-CDormivepnreTswsoor-sStage Air GasolineC-DormivpernesTswoor-sStage Air QRSScrSeewriCesomQupireetsRsoortsary
Compressor

• 125 MAX PSI
• 1.2CFM at 90 PSI

MIL-2840-20
$49999◉

RCP-7581HS
7.5hp, 80Gal

RCP-1330G QRS-10
13hp, 30Gal 10hp, 132Gal

Lifts Shop Cooling

14 Tool News | October-December 2021

Flexzilla® Retractable Flexzilla® Levelwind BLOW GUNS Shop Equipment
Air Hose Reel Retractable Hose Reel
AST-1717 AST-1716 Air Blow Gun Kit
• Positive Latching Mechanism - 18 in. intervals • Levelwind™ Technology
• 3ft x 1/4” MNPT Lead-in Hose. • Free Standing Base • Kit Includes: 4” angled nozzle blow gun,
• Auto Retract/Latch Hose Mechanism • Latching Mode Switch 15mm, 24mm & 35mm tapered rubber
• Heavy duty mounting bracket and adjustable • (7) Position Locking Bracket nozzle, venturi nozzle, OSHA compliant
• Assembled in USA of U.S. safety nozzle & spray shield
hose stopper
and global components.” TOO-99350

Flexilla® Air Hoses Titan Long Reach Blow Guns

• Maximum Working Pressure: 300PSI • Nozzle o.d.: 0.50”
• Offers Extreme All-Weather Flexibility from -40° to 140° F • Air inlet: 1/4” NPT female
• Lays flat- no memory • Working pressure: 90 psi
• Assembled in USA of U.S. and global components.” • Maximum pressure: 150 psi
• Made in USA (3/8 and 1/4 in. hose assemblies only)

Flexzilla® Whip Hoses-3/8” 8pc Blow Gun Set

• Increases longevity of the main hose. • Multiple Tips (1 each): Rubber,
• Reduces user fatigue by eliminating weight of coupler/plug. Air Screen, Brass, Safety,
• Ball Swivel increases mobility, 30° tilt in any direction. Adjustable , Nylon,
& Safety Booster Tip
PART DESCRIPTION PRICE
• 1/4” NPT (F)
LEG-L8305FZ 3/8”x50ft Flexzilla® Levelwind Air Hose Reel $254.99
TIT-19436
LEG-L8335FZ 1/2”x50ft Flexzilla® Levelwind Air Hose Reel $299.99 Extra Tips
Turbo Pistol Grip Blow Gun
LEG-L8250FZ 3/8”x50ft Flexzilla® Retractable Air Hose Reel $189.99 MLT-S-181 MLT-S-183
$2999 $1299
LEG-HFZ3825YW2 3/8” x 25ft, 1/4” NPT Flexzilla® Air Hose $34.99

LEG-HFZ3850YW2 3/8” x 50ft, 1/4” NPT Flexzilla® Air Hose $44.99

LEG-HFZ1225YW3 1/2” x 25ft, 3/8” NPT Flexzilla® Air Hose $39.99

LEG-HFZ1250YW3 1/2” x 50ft, 3/8” NPT Flexzilla® Air Hose $69.99 Lever Style Blow Gun
MLT-S-153
LEG-HFZ1250YW4 1/2” x 50ft, 1/2” NPT Flexzilla® Air Hose $79.99 $1499

LEG-HFZ3802YW2B 3/8” x 2ft Flexzilla® Whip Hose $19.99

LEG-HFZ3806YW2B 3/8” x 6ft Flexzilla® Whip Hose $24.99 PART DESCRIPTION PRICE
AST-1717 4” Blow Gun - GREEN $11.99
Flexzilla® Pro Custom Length Whip Hose AST-1718 4” Blow Gun - ORANGE $11.99
AST-1715 13” Blow Gun - Green $13.99
• 3/8” x 6’, 1/4” MNPT High Flow Ball Swivel, 1/4” MNPT AST-1716 20” Blow Gun - ORANGE $15.99
Reusable Fitting TOO-99350 $37.99
TIT-19992 Air Blow Gun Kit $12.99
• Max. working pressure at 70 degrees Fahrenheit: 300 psi TIT-19993 24” Long Blow Gun $14.99
• High Flow Ball Swivel Plug rotates 360° at a 30° angle TIT-19994 36” Long Blow Gun $24.99
TIT-19436 48” Long Blow Gun $14.99
LEG-HFZP3806YW2B 8pc Blow Gun Set
$1999

Recoil Hoses 1/4”X25FT Nylon Hose $2299
3/8”X25FT Nylon Hose $4999
MLT-1669 3/8”X50FT Nylon Hose $7999
MLT-1674
MLT-1675

Retractable Air Hose SideWinder Air Air Hose Holders
Reels w/ Hose Hose Reel
• Strong Magnet Attaches to Ferrous
• Heavy-gauge, steel construction, w/ durable hose. • Capacity: 150 feet of Metal Surfaces to Keep Most 3/8” to
• Slotted mounting base for easy attachment to ceiling, 5/8” OD hose 1/2” Shop Air Hoses off the Floor, Clean
and Accessible.
walls, work benches. Plus (5) position a roller arm. • Air Hose NOT
INCLUDED LIS-49700 - Orange
3/8” x 50’, 1/4” NPT 1/2” x 50’, 1/2” NPT LIS-49750 - Green
LNC-83753 LNC-83754 LIS-50350 $1999
$9999
MSRP $265.42 MSRP $291.20

$19499◉ $22499◉

15Tool News | October-December 2021

Shop Equipment “SPACE-SAVER” WRENCH Low Profile Wrench Rails TOOL ORGANIZERS
ORGANIZER SETS
Fits in even the shallowest Magnetic Wrench Rack Quik-Pik SAE & Metric Wrench
Holds Up To 40 Wrenches! drawers and Will Never Slip! Racks
• Forward/Reverse teeth fits more Holds up to 10 Wrenches
ERN-6050 (Red) • Holds up to 13 wrenches
wrenches. EZR-WR10-RD • Low profile, fits 2-inch deep
• Trims easily for a custom fit. • Holds up to 30 Wrenches $2499
• Graduated design toolbox drawers
ERN-6014 (Red)
ERN-6015 (Black) $1699 SAE-1/4” to 1”
Your Choice HNS-5301(Red)
$1299 Metric - 7 to 19mm
HNS-5302 (Grey)
2pc Wrench Rail Organizers $699

• Holds up to 20 wrenches 3pc Screwdriver Rail Organizers Low Profile
• Cut to fit different sizes Screwdriver Rails
• Holds up to 20 screwdrivers ERN-6040 (Red)
ERN-6012 (Red) • Cut to fit different sizes
ERN-6013 (Black) • Holds up to 14 screwdrivers
Your Choice ERN-6010 (Red)
$799 YEoRuNr-C6h01o1ic(eBlack) $999
$799

“GRIPPER” Wrench Organizers

“GRIPPER” flexible teeth provide wrench security for
travel. Includes a flexible handle and it hangs on a wall

“GRIPPER” Screwdriver 12pc Screwdriver
Organizer Organizers

• Holds up to 10 screwdrivers • Slotted for hanging

ERN-5310 (Red) ERN-5090 (Red)
$699 ERN-5091 (Black)
Your Choice
PART COLOR DESCRIPTION PRICE $699
ERN-5084 RED 9-Tooth (1/4” to 3/4” / 6 - 15mm) $6.99
ERN-5085 9-Tooth (1/4” to 3/4” / 6 - 15mm) $6.99 Miscellaneous Parts & Tool Trays
ERN-5086 BLACK 11-Tooth (1/4” to 7/8” / 6 - 16mm) $6.99
ERN-5087 RED 11-Tooth (1/4” to 7/8” / 6 - 16mm) $6.99
ERN-5088 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $7.99
ERN-5089 BLACK 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $7.99
ERN-5082HV RED 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $8.99

BLACK
Hi-Viz

STUBBY WRENCH “GRIPPER” ORGANIZERS
10-Tooth 11-Tooth
ERN-5074 (Red) ERN-5076 (Red) 10-Compartment Tray 3-Compartment Tray
ERN-5075 (Black) ERN-5077 (Black)
Your Choice Your Choice • 11”L X 16”W X 1.5”H • 10.5”L X 10.5”W X 1.5”H
$699 $699
ERN-5010 (Red) ERN-5020 (Red)
Wrench Organizers ERN-5011 (Black) ERN-5021 (Black)
ERN-5012 (Blue) ERN-5022 (Blue)
Slotted for hanging YEoRuNr-C5h01o7icHeV (HiViz) YEoRuNr-C5h0o2i3cHeV (HiViz)
$999 $799

PART COLOR DESCRIPTION PRICE 24” Locking Tool Holder The Plier Pro
ERN-5066 15-Tooth $7.99
ERN-5067 RED 15-Tooth $7.99 Four 3/8” slots, one 7/16” slot, four 1/2” slots, • Dimensions: 10” x 3.5” x 3”
ERN-5068HV BLACK 15-Tooth $7.99 two 5/8” slots and two 3/4” slots. Lock feature
ERN-5060 HiViz 16-Tooth $7.99 secures tools to the toolbox without taking up ERN-5500 (Red)
ERN-5061 16-Tooth $7.99 valuable drawer space. Slotted mounting holes to $1299
ERN-5062HV RED 16-Tooth $7.99 fit most toolboxes and carts. ERN-5505HV (Hi-Viz)
ERN-5160 BLACK $7.99 $1499
ERN-5161 HiViz 16-Tooth-Reversible $7.99 LIS-49490
ERN-5162HV 16-Tooth-Reversible $7.99 $5499
ERN-5063 RED 16-Tooth-Reversible $9.99
ERN-5064 BLACK $9.99 10” Locking Air Tool Holder
ERN-5065HV HiViz 19-Tooth $9.99
19-Tooth • Organize your air tools with this handy tool holder! Holds up to 5 air tools in a
RED 19-Tooth 10” space. Can be mounted on a tool box, shelf, wall or table!
BLACK
HiViz LIS-49960
$2499

24” Magnetic Bar Holder AST-7324
$2499
Organizes Your Tools & Holds them Securely

16 Tool News | October-December 2021

SOCKET ORGANIZERS Magnetic Socket Rails Shop Equipment

Dura-Pro Twist Lock Rotating socket clips make loading and unloading easy
Socket Organizers Aluminum frame
Sockets can easily rotate 360° for quick identification
1/4” 3/8” 1/2”
APE-83126 (1/4”Dr)
ERN-8420 ERN-8421 ERN-8422 APE-83127 (3/8”Dr)
18” Standard 18” Standard 18” Standard APE-83128 (1/2”Dr)
ERN-8420M ERN-8421M ERN-8422M $2499 each
18” Magnetic 18” Magnetic 18” Magnetic Organize Your Sockets For Quick, Easy
Identification By Size And Style

All organizers hold regular and deep sockets.
Made in U.S.A.

BLACK

RED ERN-8400 ERN-8401 ERN-8402 1/4” 3/8” 1/2”
18” Standard 18” Standard 18” Standard
ERN-8400M ERN-8401M ERN-8402M GREY 4mHNmSto-11450m2m 6mHNmSt-o32800m2m 10HmNmSt-o12270m2m
18” Magnetic 18” Magnetic 18” Magnetic

BLUE ERN-8403 ERN-8404 ERN-8405
18” Standard 18” Standard 18” Standard
ERN-8403M ERN-8404M ERN-8405M
18” Magnetic 18” Magnetic 18” Magnetic

STANDARD $799 RED H1N/8”St-o145/80”1 HN1/4S” -t3o810” 1 H3N/8”St-o12110/4”1
MAGNETIC $1699

Socket Boss ORANGE HNS-1405 HNS-3805 HNS-1205
2-Rail - 1/4”, 3/8”, 1/2”, & 3/4” Dr 1/8” to 5/8” 1/4” to 1” 3/8” to 11/4”
HNS-1206
Includes Socket Tray, (2) 18” Socket Rails & (30) Twist-Lock Socket Clips HNS-1406 HNS-3806
*3/4” Dr. Comes with (14) Socket Clips 4mm to 15mm 6mm to 20mm 10mm to 27mm

GREEN HNS-1403 HNS-3803 HNS-1203
1/8” to 5/8” 1/4” to 1” 1/4” to 1”

HNS-1404 HNS-3804 HNS-1204
4mm to 15mm 6mm to 20mm 6mm to 20mm

$1099 $1299 $1499
SETS
COLOR
PART COLOR DESCRIPTION PRICE PART RED DESCRIPTION PRICE
ERN-8461HV 1/4” Drive $19.99 HNS-9301 GREY $34.99
ERN-8462HV HiViz 3/8” Drive $19.99 HNS-9302 RED & SAE (1401,3801,1201) $34.99
ERN-8463HV HiViz 1/2” Drive $19.99 HNS-92000 GREY $64.99
HiViz 3/4” Drive $24.99 Metric (1402,3802,1202)
ERN-8458 RED 3/4” Drive $24.99 HNS-92001 GREEN COMBINATION (1401, 1402, 3801, $64.99
ERN-8459
BLUE HNS-92002 ORANGE 3802, 1201, 1202) $64.99
COMBINATION (1403, 1404, 3803,
3-Rail Universal (1/4”, 3/8”, & 1/2”)
3804, 1203, 1204)
Includes(1) Socket Tray, (3) 18” Universal Socket COMBINATION (1405, 1406, 3805,
Rails, (15) Socket Clips of each Size.
3806, 1205, 1206)

1/2” 3 Row Socket Organizers

• Each post is clearly marked for socket size.
No more searching for Loose Sockets!
• Organize your sockets for quick, easy
identification by size and style.
• Post bases beefed-up to hold sockets
more securely

• Each tray holds regular, semi-deep and
deep sockets. **42 Sockets Total**
• Sockets are not included.
• Made of tough ABS plastic that resists oil
& grease
• Fits most U.S. and foreign made sockets
• 100% Made in the USA

PART COLOR DESCRIPTION PRICE HNS-12013 SAE Red HNS-12053 SAE Orange
ERN-8450 RED 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12023 MM Grey HNS-12063 MM Orange
ERN-8451 BLUE 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12033 SAE Green HNS-12073 SAE Hi-Viz
ERN-8460HV HiViz 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12043 MM Green HNS-12083 MM Hi-Viz
Your Choice
$1499

17 Tool News | October-December 2021 17Tool News | October-December 2021

Shop Equipment SOCKET ORGANIZERS THE BIT BOSS

Magnetic Twist Lock Complete Fits up to 90 bits!
Socket Systems
ERN-5710 (Black)
Includes (4) 18” socket organizer rails, $1699
(384) socket ID stickers, organizer ERN-5720HV (HiViz)
mounting kit, face & side mount ratchet and $1999
extension holders, (15) 1/4” socket clips,
(30) 3/8” socket clips, (15) 1/2” socket clips.

ERN-8470 (Red)
ERN-8471 (Blue)

MSRP $46.51

$3999

METAL Rail Socket Organizers HEAVY-DUTY Red 3/8” Drive Master HEX & TORX
Plastic Socket Racks Socket Tray
Each rail has 16 clips.
14 inches long & include 10 studs. • Torx: 27, 30, 40 , 45, 47, 50, 55 & 60
VIM-V420 (1/4”) • Hex (SAE): 1/8”, 9/64”, 5/32”, 3/16”, 7/32”,
VIM-V421 (3/8”) Individual Rails 3 Piece Set
VIM-V422 (1/2”) VIM-V520 (1/4”) VIM-V523 1/4”, 5/16”, 3/8”
VIM-V424 (3/4”) VIM-V521 (3/8”) $3999 • HEX (MM): 4, 5, 6, 7, 8, 9 & 10mm
$799 VIM-V522 (1/2”)
All-in-One Tray $1399 HNS-50000
VIM-V444 $999
$2499
8” x 11” Flexible Magnetic Pad
Magnetic Socket 3/8” 1/2”
Holders • Ideal for holding parts and tools
1/4” 28 Compartments 22 Compartments conveniently at your reach.
Up to 1” or 24mm Up to 1” or 20mm
26 Compartments • Sticks to most parts of a vehicles
Up to 5/8” or 15mm LIS-40200 (Red) LIS-40900 (Red) metal body and is harmless to finished
surfaces.
LIS-40120 (Red)
LIS-40130 (Black) LIS-40210 (Black) LIS-40990 (Black) VIM-MAGPADLG
$1999 $2499 $2999
$6499

3 Row Socket Organizers 1/4” 3/8” MAGNETIC TRAYS

GREY HNS-14023 HNS-38023 Magnetic Stainless Steel Parts Trays
Metric Metric • Can be used upside-down or on side of vehicle
• Rubber covered magnets will not scratch metal
TIT-11061 TIT-21260

RED HNS-14013 HNS-38013 TIT-11195 TIT-21262 TIT-21263
GREEN SAE SAE
ORANGE PART DESCRIPTION PRICE
HNS-14043 HNS-38043
HiViz Metric Metric TIT-11061 4.5” Diameter x 1” Deep - 12pc Display $4.99
Available
HNS-14033 HNS-38033 TIT-21260 $11.99
SAE SAE TIT-11195 3”, 4-1/4” & 5-7/8” Dishes Set
TIT-21262
HNS-14063 HNS-38063 TIT-21263 8-7/8” (L) x 2-1/2” (W) x 1-1/4” (D) $6.99
Metric Metric
10-1/2” (L) x 11-1/2” (W) x 1” (D) $21.99
HNS-14053 HNS-38053
SAE SAE 14” (L) x 6-1/2” (W) x 1” (D) $15.99

HNS-14083 HNS-38083
Metric Metric

HNS-14073 HNS-38073
SAE SAE

$1499 $1499

PART COLOR SETS PRICE Magetic Expandable
HNS-92003 RED/ $49.99 Parts Holder Set
HNS-92004 GREY DESCRIPTION $49.99
HNS-92005 GREEN $49.99 • Expandable to 2 inches
HNS-92006 Combination 4 Pack 1/4”. 3/8” Dr $49.99 • Includes a red, green, and
ORANGE Metric & SAE
orange tray
HiViz Combination 4 Pack 1/4”. 3/8” Dr
Metric & SAE EZR-EZTRAY-CLR
$2499
Combination 4 Pack 1/4”. 3/8” Dr Quad Tray
Metric & SAE
• 4 separate compartments for easy organization
Combination 4 Pack 1/4”. 3/8” Dr • Includes 1 Quad Tray
Metric & SAE
EZR-EZTRAY-QGR
EZR-EZTRAY-QOR
EZR-EZTRAY-QRD
$2999

18 Tool News | October-December 2021

WORK CARTS & BENCHES Shop Equipment

Heavy-Duty 2-Shelf Plastic 220lb Capacity Adjustable 16” x 18” Tool Box
Utility Cart Work Table W/ Drawer Drawer Liner

• Dimensions: 16”(W) x 30”(L) x 31”(H) & • Designed to house working air tools, plus • Non-adhesive gripping fabric
only 21 lbs! standard screwdriver/pry-bar holder • Washable
• Easily cuts to size
• Trays are 4” deep & can hold 300 lbs • 1” deep drawer • Stops sliding and rattling
• Weight: 41 lbs
AST-8330 TIT-30931
SUN-8019 $1499
MSRP $165.05
MSRP $254.31
$11999
$18999◉

ORGANIZERS 12 Compartment

4 Compartment 9 Compartment • (8) Small & (4) Large
TIT-21268 Compartments
• Dimensions: 4.25”(W) x 12.2”(L) x 2.5”(H) $1299
• All compartments are the same size. TIT-21269
$1999
TIT-21267
$799

4pc Small Parts Organizer 11 Bin Small Parts Organizer

• 4-Pack organizer set contains 4 different organizers 11 Removable bins:
at 3 different sizes for all your storage needs: • Seven medium bins
• Four small bins
• (1) Large organizer - 11-7/16” x 9-1/16” x 2-3/8”
• (2) Small organizers - 6-1/8” x 9-1/16” x 2-3/8” TIT-21228
• (1) Deep organizer - 6-1/8” x 9-1/16” x 4-1/2” $999

TIT-21227 20V Cordless/Corded Wet-Dry Vacuums
$2199 (Bare Tool)

SHOP VACUUMS • Tank Size: 2-gal.
• Filter: Wet/Dry (washable & reusable)
M18™ Cordless Wet/Dry Vacuums • Attachments: Crevice & Wide Nozzle
*Batteries & Charger sold separately*
• Tank Size: 2-gal.
• Includes: 6ft Hose, Crevice Tool, DWA-DCV581H
$21999◉
Utility Nozzle & HEPA filter
*Batteries and Charger Sold M18™ Compact Vacuum Kit
Separately*
• Includes: 4ft Hose, Crevice Tool,
MIL-0880-20 Floor Tool, (2) Extensions & HEPA filter
$15499◉
*Batteries & Charger sold separately*
M12™ FUEL™ Cordless Wet/Dry
Vacuum MIL-0882-20
$13999◉
• Tank size: 1.6-gal M18™ Compact Vacuum
• Includes: Crevice Tool, 5’ Flexible Hose,
• Tank size: .25-gal
HEPA Filter, Utility Nozzle, Wall Mount • Extension Wand, Powered Floor Tool, Floor
*Batteries & Charger sold separately*
Tool, 6’ Flexible Hose, Crevice Tool, Utility
MIL-0960-20 Tool, Brush Tool
$16999◉ *Batteries & Charger sold separately*

FREE $117 MIL-0940-20
Value! $25999◉
M12 REDLITHIUM™
XC 3.0Ah Battery 19Tool News | October-December 2021
MIL-48-11-2402X

Shop Equipment DRAINS AND DRIP PANS LIS-17922 LIS-38750 LIS-38780

LIS-17892 LIS-17902 LIS-19722

• 6.25” pan height to fit tight spaces. 1.125” outer LIS-17912 PART DESCRIPTION PRICE
diameter spout for quick and easy pouring LIS-17892 22"x23" Transmission Drain Funnel $19.99
LIS-17982 LIS-17972 LIS-17902 24"x36" Transmission Drain Funnel $49.99
LIS-19722 24"x36"x1" Polyethylene Drip Pan $29.99
LIS-17972 $19.99
LIS-17982 4.5 Gallon Oval Drip Pan - Black $19.99
LIS-17912 4.5 Gallon Oval Drip Pan - Green $44.99
LIS-17922 55 Gallon No Splash Drain Funnel $49.99
LIS-38750 $12.99
LIS-38780 Multi-Drain Tub $24.99
15" No Splatter Pad - Circle
22" No Splatter Pad - Square

FUNNELS LIS-19732 ERN-960
LIS-19702
LIS-19802 LIS-18232 LIS-24680

LIS-17232 LIS-19832 LIS-24780 PART DESCRIPTION PRICE
ERN-960 Harley Davidson Filter Funnel $16.99
Includes new cap for Ford LIS-17232 $9.99
LIS-18232 Right Angle Funnel $14.99
LIS-19802 Right Angle Funnel w/Lid $6.99
LIS-19832 $14.99
LIS-24680 2pc Super Funnel $39.99
LIS-24780 1.6qt Polypropylene Funnel $49.99
LIS-19732 14pc Spill-Free Funnel Set $17.99
LIS-19702 18pc Deluxe Spill-Free Funnel Set $24.99
6qt Polyethylene Oil Dispenser
8qt Polyethylene Oil Dispenser

110v Parts Washers 20 Gallon Standing Sand Blaster
3.5 Gallon Benchtop
• For use with water based solvent • Includes: Hopper, Aluminum Blast
• Can be moved easily • Self draining. Convenient Gun, and 15ft Material Hose
• Ideal for small garages & homes
removable work shelf. • Use with an air compressor
IMP-20-PW312 • Fusible link greatly reduces risk • Compatible with any abrasive:
$11499◉
of fire hazards silica, sand, steel grit, glass beads
• 110 volt solvent pump & pecan shells
• Operating Pressure: 90 PSI
IMP-20-PW20 • Requires at least 3.5 CFM @ 50 PSI
$23999◉ • Nozzle Size: 3/16”
• Air Inlet: ¼” NPT

TIT-19450
$9999

20 Tool News | October-December 2021

BRAKE & PRESSURE BLEEDERS Shop Equipment

Vacuum Pump / Brake Bleeding Kit Vacuum Brake Bleeder
Brake Bleeder
Includes everything for • 1 Liter Capacity reservoir.
Includes everything for performing one-person • Working pressure: 71-113 PSI
performing numerous brake & hydraulic clutch • Maximum pressure: 113 PSI
automotive diagnostic bleeding on automobiles, • 3/8” NPT
and mechanical tests, motorcycles, ATVs,
and for one-person snowmobiles, etc. Also TIT-51885
brake bleeding. works great for siphoning or $3499
transferring fluids from tanks
MTY-MV8000 and reservoirs. Silverline® Elite Kit
$5499
MTY-MV8020 • 2-in-1 Ergonomically Designed Hand Pump
Professional Grade $4999 delivers both vacuum & pressure at a turn of a
Compressed-Air switch.
Brake & Clutch Bleeder Pressure Bleed System
• Kit Includes: 4.5 oz. fluid reservoir bottle w/ fluid
• Compact yet powerful unit • Forces new brake fluid through the master cylinder, while trans-fer and storage lids, diaphragm style 2”
bleeds up to 2 quarts per minute. air & old fluid are expelled through the bleed screws. compound pressure/vacuum gauge w/ rubber
boot, Multiple adapters, (2) Tapered manifold
• Kit includes an advanced selection of • Utilizes push-to-connect, quick-change style accessory plugs, (12) Vacuum cap plugs,(5) Connection
accessories that ensure maximum convenience connections. tubes, Master Cylinder Refill Kit, Custom
and performance for greater productivity. Molded Case, & User’s Manual.
• (7) master cylinder adapters to connect to most
MTY-MV6830 American, Asian, and European cars & light trucks. MTY-MV8500

MSRP $233.52 • 1.2-gallon Fluid Reservoir w/ Integrated Manual Pump, MSRP $117.17
Pressure Gauge, & Pressure Relief Valve.
$18999 $9999
• 5ft Fluid Dispensing Hose w/ flow control and auto-
shutoff valves, dispensing fluid under pressure for
smooth continual flow.

MTY-MV6840

MSRP $500.75

$37499◉

Power Steering Adapter Kit

• MVA660 - Universal cone-shaped rubber
body adapts to the varying diameters of many
automotive power steering reservoirs to form an
airtight seal when vacuum is applied.

• MVA661 - GM Power Steering Adapter
• MVA662 - Ford Power Steering Adapter

MTY-MVA670
$7999

FLUID EVACUATION Pneumativac

Manually Operated Reversing Valve allows for Uses standard compressed
evacuating or dispensing of fluids shop-air & a powerful venture
Requires no electricity or 2.3 Gallon Capacity vacuum to extract fluids in just
compressed air. one minute.
Comes w/ (3) evacuation MTY-MV7201 2.3 Gallon Capacity
tubes & adapters.
1.9 Gallon Capacity MSRP $171.89 MTY-MV7300

MTY-MV7400 $12999◉ MSRP $172.71

MSRP $112.75 Pumps $12999◉
Extraction & Filling
$8999◉ Lever Action Pumps
Fits 5 Gallon Buckets
Fluid Transfer Pump Works with all types of Automotive
LNC-G400 Fluid, including Brake Fluid!
Quick & Easy method to transfer or $4499
siphon all types of fluids including oil, CTA-7075
trans-mission fluid, water, etc. Also
can be used to inflate a wide-range • Capacity: 200cc / 0.22qt
of items (inflation needle included). • Includes spring-loaded
Made of durable polyethylene & will
not rust or corrode. detachable tube w/ cap

MTY-MV7241 $3499
$1999 Lift Drain

Rotary Barrel Pump TOO-17580 Rotary Action Quickly and easily adjusts to the proper
LNC-G402 height. Both models have an integrated
• Fits 15, 30, & 55 gallon drums w/ 2” opening. MSRP $167.81 $7999 oil filter drain shelf for convenience. In
• Dispenses 8-gallons per 100 revolutions. addition to a drain spigot, the 18-gallon
• Made from polyethylene sulfide w/ fluorine $12999◉ models features a bung port that can
be used with a variety of pump systems,
rubber and Teflon(R) seals. while the 8-gallon models have a drain
• Safe to use with: thinners, acetone, DEF cap. All models feature a splash-guard
to catch overspray and casters with
(Urea), gasoline, water, weak acids, wind- over molded steel inserts for long
shield washer fluid, anti-freeze, diesel, service life and easy movement.
alkalines, and petroleum. 8 Gallon

LIS-11102 21

MSRP $193.95

$13499

Tool News | October-December 2021

Shop Equipment 18-Gallon Used Fluid Receiver Professional 17-Gallon
Low Profile Truck Drain
All steel design, w/ 14” telescoping bowl
adjusts from 45”-72”, includes a preset • Reservoir molded from lightweight high-impact polypropylene & mounted
air regulator used w/ standard shop on 4” swivel casters.
air. Receiver includes a safety valve & a
reinforced dispensing hose that doubles • Top of the Reservoir features large 20” x 29” recessed area for capturing
as a sight gauge to prevent overfilling. fluid, and a removable metal screen that keeps out debris.
• 66lbs
• Recessed Pockets at each corner provide storage for drain plugs and filters.
LNC-3601
LNC-3669
MSRP $393.36
• 120v Electric Pump installed
$31499 below the front of the reservoir
for protection.
M18™ Transfer Pump (Bare Tool)
• 6ft Discharge Hose w/ a
• Industry’s first cordless transfer pump J-Hook style spout w/ drip plug
• Pumps water at 480 Gallons per hour
• Lift up to 18 ft. • 54lbs
• Head height: up to 75 ft. MSRP $702.62
• Inlet connection: 3/4 in. brass
• Outlet connection: 3/4 in. brass $53999◉
• Compatible with all M18 REDLITHIUM battery packs
120 lb High Pressure Air LNC-6917 Drum Dolly
MIL-2771-20 Operated Portable Grease MSRP $1401.43 • Use with any 400 lb. drum
Pump Package • Internal Diameter 23-1/4”,
MSRP $338.00 $97999◉
• Free Delivery = 80 cu.In. per minute height 5-1/4”
$25999◉ • Max Pressure = 7500 psi • Hard rubber wheels: 1” wide,
• Ratio = 50:1
• 7ft Grease Hose. 2-1/2” dia.
• 4-wheel Band Dolly Base • Capacity: 650 lbs

LNC-84377
• 39lbs MSRP $175.99
$15999◉

CREEPERS 40” Padded Creeper

Low Profile Plastic Creepers • Weight Capacity: 350 lbs
• Weight: 15lbs
• Dimensions: 38” (L) x 17-1/2” (W) x 4” (H). With • Dimensions: 40-1/8” x 17” x 4”
only 7/8” floor clearance. • Vinyl Padded Head & Back Rest
• Heavy-Duty Frame
• Weight: under 15 lbs.
PRO-C1004
$6999

STANDARD WHEEL (2”)

PART DESCRIPTION PRICE PART DESCRIPTION PRICE Z-Creeper
$119.99◉
LIS-92102 RED Creeper $94.99 LIS-92032 RED Large Wheel Creeper $119.99◉ • Dimensions: 36” (L) x 16-5/8” (W)
LIS-93102 YELLOW Creeper $94.99 LIS-93032 YELLOW Large Wheel Creeper $119.99◉ • Weight Capacity: 300 lbs
• Weight: 16lbs
LIS-93202 ORANGE Creeper $94.99 LIS-94032 BLUE Large Wheel Creeper • Vinyl padded seat and headrest
• (6) 3” Polyurethane Wheels
LIS-93602 PINK Creeper $94.99 Fold-Up Creeper
PRO-C2036
LIS-94102 BLUE Creeper $94.99 Works great on off road situations $6499
and under a vehicle where no jacks
LIS-97102 BLACK Creeper $94.99 or lifts are used. Folds up and hangs
for convenient storage.
LIS-99102 GREEN Creeper $94.99
LIS-95002
Jeepers Keeper™ Creeper Hanger $6999

• Can be Attached to Most Toolboxes, Benches or Walls 2-in-1 Shop Seat & Stool
• ABS plastic hooks mount anywhere on the 24” wide rail to
• Weight Capacity: 300 lbs
accommodate different types of plastic or metal creepers. • Seat Size: 14” x 7-7/8”
• Step Size 14” x 9”
LIS-21350 • Weight: 20lbs
$2499
PRO-C2800
SHOP SEATS Tractor Seat

Shop Stool EZ Set Pneumatic • Air cylinder for easy
Professional Shop Seat height adjustment
• Seat Rotates 360 Degrees
• Integrated Tool Tray Helps Organize • (5) 2-1/2” casters • (5)3-1/2” heavy duty
• 15-1/4” diagonal tool tray– 1” deep casters
Tools and Parts • 12-1/2” diagonal seat
• Smooth-Rolling Casters Provide • High height: 20-1/2” • 17” diameter
• Low height: 15-1/2” • 1” deep tool tray
Stable Base • Weight: 16lbs • Weight: 30lbs
• Padded Seat Adjusts From 16-1/2 to
SUN-8509 SUN-8514
T2I1T--18/45in0. 82 PART

DESCRIPTION PRICE

Hydraulic Shop Stool TIT-85082 Pneumatic Shop Stool $59.99
SUN-8516 Hydraulic Shop Stool $124.99◉
• Adjustable vinyl padded SUN-8509 EZ Set Pneumatic Shop Seat
backrest & seat SUN-8514 $99.99
PRO-C2800 Tractor Seat $159.99◉
• Backrest can be set from 2-in-1 Shop Seat & Stool $69.99◉
1.5”-12”

• Weight: 22lbs

SUN-8516

22 Tool News | October-December 2021

FLOOR JACKS Shop Equipment

SUN-6603LP LQiumaintetidty OTC-LDJ35 SUN-66037JPK

• 3 Ton • Capacity | 3.5-ton • Lift Range: 6”-20”
• Ultra-Low height at 2.75” • Lifting range | 5.2” to 21.9” • 3.5-Ton Service Jack w/
• High Height: 20” • Reach | 78.5”
• Weight: 110 lbs • Weight: 92lbs Quick Lift Technology
• Pair of 6-Ton Jack Stands
• Weight: 150lbs

PART DESCRIPTION PRICE
SUN-6603LP 3 Ton Low Profile Floor Jack $299.99◉
OTC-LDJ35 $379.99◉
SUN-66037JPK 3.5 Ton Service Jack $349.99◉
3.5 Ton Jack and Stand Kit

SERVICE JACKS 22 Ton Heavy Duty Truck Jack

10 Ton Long Chassis Service Jack • Self-retracting two stage ram with springs
• 8” diameter pneumatic wheels for easy maneuverability
• Foot Pedal speeds lifting • Capacity: 22 Ton
(7” to 27”). • Minimum Height: 9”
• Maximum Height (with adapter): 21”
• Spring loaded 40” handle • Ram Travel: 4.5”
& built in safety overload • Handle Length: 42.2”
• Weight: 117 lbs.
OTC-HDJ10 FCroeliglehctt
SUN-6622
• 10 ton, weighs 412 lbs
MSRP $957.87
$1,19999◉
$69999◉

22 Ton Heavy Duty Truck Jack 22 Ton Heavy Duty Truck Jack
• Chrome plated ram
• Improved bearing surfaces • Air pressure: 90 - 145 PSI
• High cycle durability • Lifting range: 8.27” to 20-2/3” using longest saddle
• Long life seals • Reach: 69.87”
• High/low temp functionality • Saddle: 3” dia., round with center notch.
• 5 year warranty with electronic registration • Includes 3 saddle lengths:
• Minimum Height: 9.15” • Max height using ¾” saddle: 17-3/4”
• Maximum Height: 22” with extensions • Max height using 1-15/16” saddle: 18-15/16”
• Saddle Extensions: 1”, 2.5”, 6” & 7” • Max height using 3-7/8” saddle: 20-2/3”
• Handle length: 47.24”
BHK-BP225 FCroeliglehctt • Weight: 110lbs
$59999◉
OTC-UA22

MSRP $1,039.94

$79999◉

TRANSMISSION JACKS

1/2 Ton Telescopic SUN-7793B FCroeliglehctt Floor Style Transmission Jacks
Transmission Jacks BHK-BH7011
• Lift Range: 35.5” to 75.5”
• Weight: 167lbs • 1/2 ton/81/2” - 243/4”
• Fully adjustable universal saddle w/ • Weight: 102lbs
corner brackets safety chain, plus flash
chromed ram, & safety overload system
• Foot operated pump and lowering pedals BHK-BH7210 FCroeliglehctt
AST-500HWA
FCroeliglehctt • 1 ton/77/8” - 331/2”
• Lift Range: 34” to 70.5” • Weight: 198lbs

• Weight: 153lbs

Hydraulic Transmission Jacks
OTC-1521A
FCroeliglehctt PART DESCRIPTION PRICE
• 0.5 Ton AST-500HWA 0.5 Ton Telescopic Jack $679.99◉
• Weight: 140lbs SUN-7793B 0.5 Ton Telescopic Jack $1099.99◉
BHK-BH7011 0.5 Ton Floor Style Jack $649.99◉
OTC-1522A FCroeliglehctt BHK-BH7210 1 Ton Floor Style Jack $849.99◉
OTC-1521A 0.5 Ton Hydraulic Jack $599.99◉
• 1 Ton OTC-1522A $1,499.99◉
• Weight: 352lbs 1 Ton Hydraulic Jack

23Tool News | October-December 2021

Shop Equipment 2000lb Folding 4000lb Folding Floor Crane 1.5 Ton Folding Floor Crane 700lb Engine Support Bar
Engine Stand
• Fold up for compact storage, out of • RapidRise hydraulic jack raises • Supports engines of FWD vehicles.
• 33”(H) x 41.7”(L) x 28.5”(W) your way. boom six times faster without a load • Includes 1/8” braided steel cables and
• Resistant to Structural Flex. • Max Capacity w/ Boom Extended: than standard cranes.
• Reinforced Mounting Plate. 1000 lbs @ 48” 1/4” adjustable hooks.
• Locks in 8-Positions. • Max Capacity w/ Boom Retracted: • Legs and boom can be folded • Adjustable Length:
• Weight; 132lbs 4000 lbs @ 26” quickly and easily to save space +Min 31” & Max 64”
• Wheel Diameters: Front 3-1/2” / Rear when not in use
SUN-8400 FCroeliglehctt 5-7/8” AST-5820
• Weight: 228lbs
MSRP $451.70 • Weight: 289lbs MSRP $117.48
SUN-5218
$33999◉ OTC-2004 FCroeliglehctt $59999◉ FCroeliglehctt $8999

MSRP $892.95 Motor Lift Sling

$76999◉ • Bolts to Motor Mounting Holes
• 600lbs Lift Rating
• Weight: 2.7lbs

APP-PP7134
$2499

LIFTING EQUIPMENT 4000lb Lifting Brackets 2pc High-Grip Wheel
Chocks
Car Dollies 1500lb Dolly • Attach directly onto component
for lifting. • Works great on shop floors or lifts.
3 In 1 Car Dolly • Opens up to 24” and accommodates 12.8” tires • Rubberized Material for extra slip
• Dolly vehicles by the wheel, pinch weld or frame • Unique ratcheting mechanism • Requires 1/2” diameter bolts.
• 2,000lb capacity per dolly • Weight: 35lbs resistance.
OTC-7100 • High Compression.
$5999
ERN-980
• Fully stackable, eliminating need for racks *Convenient storage rack $1999
• Weight: 30lbs also available! SUN-7709*
• Sold in sets of 2
SUN-7708
OME-47020
MSRP $335.41
MSRP $579.04
$24999◉
$34999◉
QLuimanitteitdy
3 Ton Long Rams
• Made especially for use w/
20 Ton Truck Ramps Underhoist Stands Tripod Stands 48” Farm Jack engine cranes.
IMP-20-FJ48
• Designed specifically for Capacity: 1,500 lbs Capacity: 2-ton $12999 • Collapsed height is 2 feet.
heavy-duty tasks Range: 56.25” - 85”
SOtaTnCd-wUithHf1oo5t pedal QLuimanitteitdy (IMFlPat-2B0a-sLeR)J3
• Long retractable T-handle $16999◉ OTC-UH20 $9999
for easy positioning $22999◉ I(MEyPe-2B0a-sLeR) J3E

• Frame Width: 18.25” $11499

BHK-BH5201
$59999

FCroeliglehctt QLuimanitteitdy

JACK STANDS High Lift SUN-1522A
BHK-BH5010
SUN-1003C SUN-1006C OME-32038 Capacity: 22-Ton
Capacity: 10-Ton Range: 12” - 20”
Capacity: 3-Ton Capacity: 6-Ton Capacity: 3-Ton Range: 28” - 47” Weight: 72lbs
Range: 11” - 17” Range: 15”-24” Range: 12”-17” Weight: 120lbs
Weight: 16lbs Weight: 38.5lbs Weight: 16lbs
BHK-BH5220
SUN-1012C
Capacity: 22-Ton
Capacity: 12-Ton Range: 12” - 20”
Range: 19.5”-30” Weight: 85lbs
Weight: 71.15lbs

OTC-1774B BHK-BH5030B PART DESCRIPTION PRICE
BHK-BH5030B 3-Ton Ratchet Style $49.99◉
Capacity: 10-Ton Capacity: 3-Ton 3-Ton Ratchet Style $59.99
Range: 20”-31.5” Range: 11.5” - 17” SUN-1003C 6-Ton Ratchet Style $119.99
Weight: 96lbs Weight: 15lbs SUN-1006C 12-Ton Ratchet Style $269.99◉
SUN-1012C 3-Ton Ratchet Style $79.99
Jack Stand Covers HEI-HW93503 OME-32038 12-Ton Ratchet Style $239.99◉
BHK-BH5120 10-Ton Ratchet Style $459.99◉
Made of high-compression, Capacity: 3-Ton OTC-1774B 3-Ton Ratchet Style $99.99◉
rubberized material, & fits most Range: 12”-17” HEI-HW93503 10-Ton High Lift Pin Style $559.99◉
2-ton to 6-ton jack Weight: 26lbs BHK-BH5010 $329.99◉
BHK-BH5220 22-Ton Pin Style $259.99◉
ERN-965 SUN-1522A 22-Ton Pin Style
$999

24 Tool News | October-December 2021

BOTTLE JACKS OME-10025W BH2060 OME-10125B BHK-BH2200 Shop Equipment

PART DESCRIPTION PRICE OME-10209W OME-18204C BHK-BH2300
OME-10025W 2-Ton $34.99
BHK-BH2060 6-Ton $54.99
OME-10125B 12-Ton $99.99
OME-10129B $59.99◉
BHK-BH2200 12-Ton Shorty Type $134.99◉
OME-10209W 20-Ton $139.99◉
OME-18204C $369.99◉
BHK-BH2300 20-Ton Shorty Type $399.99◉
20-Ton Air Actuated

30-Ton

PORTO-POWER® SETS PULLERS (A5P/16P”-C18a6b5le0)

• Snaps together in seconds • 8ft. Pull • Features - 42:1 Leverage, and
• Features: heavy-walled extension tubes, flex-head w/ 6ft. Pull. Cable Limiter, Keeps
APP-EZ2000 Two Wraps of Cable on the
permanently molded rubber pad (interlocked to prevent Ratchet Wheel.
separation), long handle providing low pumping effort, & 1/2 ton APP-72A
hydraulic spreader w/ 2” jaws & spreads 5/8” to 3-3/4”. IMP-16-PP4
*20-Ton Kit NOW Available! Call for Price! • Features: 36:1 Leverage, 6ft Pull, &
Galvanized 3/16” Cable. • Features - 36:1 Leverage, and 6ft. Pull.
B4-HTKo-nB65114 1B0H-KTo-Bn65115 Cable Limiter, Keeps Two
• Cast Aluminum Ratchet Wheel,
• Weight: 48lbs • Weight: 92lbs Contoured Grip & Steel Hooks. Wraps of Cable on the Ratchet Wheel.

$37999◉ $57999◉

PORTA JACK Kit 10-Ton APP-18600 (3/16” Cable) IMP-16-LB11210-1

• Features - 36:1 Leverage, and • 10’ Standard Lift w/ the Minimum
6ft. Pull. with Cable Limiter Handle Length of 16-3/8”

• Single-speed hydraulic hand pump & ram w/ OTC-1515B • Chain Distance between Hooks =
15-3/16” (5/16” dia.)

6” stroke (10-Ton). $47499◉
• Snap design extension tubes.
• 1/2-ton hydraulic spreader tool has 2” jaws
that spread from 5/8” to 3-3/8”. PART DESCRIPTION PRICE
• Carries a 2-year warranty. APP-EZ2000 1-Ton EZ Puller $44.99
• Includes: hydraulic pump, hose, ram, ram flat 2-Ton Power Pull $69.99
base, (4) extension tubes, 1/2 ton spreader, APP-72A $39.99
tube coupling, ram toe, wedge head, APP-18600 2-Ton Puller $69.99
serrated saddle, flex head, plunger toe, 90° APP18650 4-Ton Puller $49.99
wedge head, & case. IMP-16-PP4 4-Ton Puller $249.99◉
*10 ton storage case has wheels for mobility. IMP-16-LB11210-1 1.5 Ton Chain Puller

VISES Floor Mounted 2,200 LB.
Strut Compressor
Professional Shop Vises
KEN-64055 KEN-64065 • Used to easily compress many of the strut assemblies found
• 5.5” Jaw Width • 6.5” Jaw Width on passenger vehicles, including some light trucks. Can be
• Weight: 30lbs • Weighs 41lbs used with varying sizes of struts with coils up to 5/8” diameter
MSRP $220.47 MSRP $286.37
$15999 $20999 • Ideal for passenger vehicles and light-trucks
• Designed for easy, one-person use

CAL-91300

$37499 ◉

Reversible Mechanic's Vises KEN-64800 FREE SHOP PRESSES FCroeliglehctt
KEN-64650 3lb Hammer
• 8” Jaw Width w/64800
• 6.5” Jaw Width • 11” reverse position
• 10” reverse position • Weighs 74lbs
• Weight: 50lbs MSRP $524.50
MSRP $411.48
$31999
$24999

5” Bench Vise w/
Swivel Jaws & Base
TIT-22012
$18499◉

BHK-BH8202 CPT-86501 CPT-86101

• Weight: 236lbs Tool News | October-December 2021

25

Shop Equipment DISPOSABLE GLOVES PLEASE ASK FOR PRICE
AND AVAILABILITY FOR
DISPOSABLE GLOVES
DUE TO MARKET DEMAND

LIGHTNING GLOVES RED LIGHTNING GLOVES
Non-Break Powder Free Nitrile 6 mil Gloves
• Similar to the Black Lightning, but with textured
• Sold in boxes of 100, Also available in cases of 1,000 exterior for better grip!
• Made to match healthy skins natural 5.5ph levels to
LIG-RLS Small
ensure OPTIMUM COMFORT! The unique formula LIG-RLM Medium
reduces perspiration while remaining non-breakable. LIG-RLL Large
LIG-RLXL X-Large
BLACK LIGHTNING GLOVES LIG-RLXXL XX-Large
LIG-BLS Small
LIG-BLM Medium
LIG-BLL Large
LIG-BLXL X-Large
LIG-BLXXL XX-Large

ORANGE LIGHTNING GLOVES InTouch Black Nitrile 5 mil Gloves

Superior Protection at a Great Price!

LIG-ORS Small Box of 100 Small
LIG-ORM Medium LIG-B311S Medium
LIG-ORL Large LIG-B311M Large
LIG-ORXL X-Large LIG-B311L X-Large
LIG-ORXXL XX-Large LIG-B311XL XX-Large
LIG-B311XXL

Hand/Tool Wipes Safety Earmuffs Parts Wash Brush w/Flow
Through Handle
• Dual sided • Effective protection against
• Rough abrasive side to break noise. Includes 27” Flow Through Tube!

tough grit and grime • Ultra light – weighs only 5 oz. BRM-PWA
• Absorbant side that pulls mess $2499
TOO-14550
away with no residue $2199
• Includes 86 wipes

SKT-SKWIPES1
$2199

Flexzilla® Garden Hose Flexzilla® Garden Hose Water Spray Nozzles
Kit with Quick Connect Nozzle Kit, 3-Piece
Attachments, 1/2” x 50’ • Firefighter Style
• Quick connect attachment • (3) Spray patterns: Gentle shower,
Comes with hose, twist action nozzle, adapter- easily connect to
quick connect stop-flow coupler, spigot sprinkler or other attachments Medium spray or High Power jet
adapter, hose adapters and hose
hanger to make gardening a snap! LEG-HFZGAK02 TIT-11090
$999 $1099
LEG-HFZG12050QN
$4499 Flexzilla® Electrical Retractable Twist action adjustable valve for
Extension Cord Reel, 14-3 AWG variable water streams
1/2” x 70ft Retractable SJTOW Cord, 50’
Water Hose Reel • Adjustable cord stopper TIT-11091
• Cord locks in 3ft increments $1999
• Levelwind™ Technology ensures • Circuit breaker with reset button
the hose is coiled smoothly and • Lighted Triple Tap Outlet and Grounded Plug Flexzilla® Pro Extension Cord
easily every time! LEG-FZ8140503 50ft 14/3 AWG 12 ga. x 50ft Extension Cord

• Extra large swivel for maximum flow $14999 • Lighted Plug w/glow-in-the-dark stripe.
LEG-FZ8160253 25ft 16/3 AWG
LEG-L8340FZ $9499 LEG-FZ512830

MSRP $342.97 MSRP $78.78

$27499◉ $6999

Flexzilla® Garden Hoses PART DESCRIPTION PRICE
LEG-HFZG505YW 5/8”x5’ $14.99
***WON’T KINK Under Pressure!*** LEG-HFZG510YW 5/8”x10’ $24.99
• Maximum Working Pressure: 150PSI LEG-HFZG550YW 5/8”x50’ $54.99
• Leak Free O-Rings LEG-HFZG575YW 5/8”x75’ $79.99
• Anodized aircraft aluminum ends
• Lays flat - no memory
• Durable, abrasion resistant outer cover
• 3/4” - 11 1/2 GHT Fittings

26 Tool News | October-December 2021

AIR CONDITIONING Deluxe R134a/R1234yf Shop Equipment
Conversion Kit
Dual Aluminum Manifold R-1234yf Manifold R134a Side Wheel Mounted
Gauge Set Gauge Set Manifold Gauge Set • Easily convert any R134a manifold gauge
set to a R1234yf manifold gauge set.
• R12/R134a Gauges w/ guards, • Highly visible 3-1/8” Gauges (Bar/PSI) • Includes 72” Hoses
(3) 96” Hoses, Manual Couplers, • (3) 71” Nylon Barrier Hoses MAC-83736-K
1/4” SAE x1/2” ACME F Adapter • Red & Blue = 12mm-M fitting on both RBA-45111
$9499
MAC-293996-PB-CL sides MSRP $224.87
• Yellow = 12mm-M & 1/2”-16 ACME LH AIRVAC™ For both R12 &
MSRP $124.55 Features: Couplers w/ extended $21999◉ R134A
disconnect protection sleeve, &
$9999 piston-type free floating valves reduce • Uses shop air to pull the system
o-ring wear. into vacuum & includes inlet
fittings w/ 1/4” & 1/2” Acme sizes.
MAC-83272
• Free Air Displacement of 1 CFM
MSRP $244.88
RBA-34970
$19999◉ $9999

A/C Vacuum Pumps Dual-Voltage Premium High A/C System Flush Kit
• Number of Stages: 2 • Number of Stages: 2 Vacuum Pump Oil
• Free Air Displacement: 5 CFM • Free Air Displacement: 6 CFM • Designed to work w/ any light
• Ultimate Vacuum: 25 Microns • Ultimate Vacuum: 15 Microns • Thermally Stable - resists weight flushing agent which can be
• Motor: 1/3 hp w/ 1725rpm Pump Speed • Motor: 1/3 hp w/ 3440rpm Pump Speed breaking down due to heat mixed w/ pressurized air.
• Electrical Specs: 110V - 60HZ • Electrical Specs: 110/220V - 50/60HZ for a longer period of time.
• Remove refrigerant oil debris
• Lower Moisture Content during retrofitting or compressor
MAC-90065 helps to improve the ability replacement.
MAC-90066-2v-110 to reach a deep vacuum.
MSRP $591.24 • Includes flush gun, hose, canister, &
MSRP $398.75 RBA-13119-1 (pint) canister adapter.
$44999◉
$29999◉ MAC-91046A
$5999
$799 32oz A/C Flush Solvent
(RqBuAa-r1t)3203-1
$1199 • Effectively removes debris and
sludge from A/C components

• Solvent-based
• Evaporates quickly
• Leaves no residue

MAC-91049-32

$1499

Deluxe A/C Service Repair Kit Digital Thermometer/Hygrometer Thermometers
With Bluetooth® Wireless Technology RBA-10945
• Replacement gaskets, depressors, o-rings and
nylon guides for charging hoses and adapters. • Works with app to remotely provide dry bulb • Dial:0°F to 220°F
temperature, wet bulb temperature and relative
MAC-85200 humidity. $1499

$3999 • Battery Life: 40 hours continuous use, battery MAC-52220
shelf life 8 months
Condenser Fin Comb • Dial:0°F to 220°F
• Battery: one CR2032 lithium cell battery
• Cleans & Straightens $999
condenser & evaporator fins. MAC-52234-BT
RBA-43240
• 6-sided head for: $4499
8,9,10,12,14,& 15 fins per inch. • Digital Display
Spin-On Recycling RBA-34724 • 40°F to 390°F/-40°C to 200°C
RBA-18403 Filter-Drier $7999 • Battery Saver w/Auto Shut-Off
$1999 • For the following and
$3499
similar OEM models
• 1770034700 • 34888HD MAC-52223A
• 34700 • 34988
• 34800 • 34288NI • -58 to 302˚F (-50 to 150˚C)
• 34900 • 34788NI Temperature Range
• 34288 • 34998
• 34788 • AC1234-4 $2499

Leak Detector Economy Leak
Detector
Both Units Detect ALL
Refrigerants, & Leaks as • 3 Levels of Sensitivity (5
small as 1/10oz Per Year Levels of Detection)
• (6) Levels of Sensitivity
• Detects leaks as small as
& (15) Detection Levels 1/10 oz per year

MAC-56200 • Detects all refrigerants
(CFC’s, HCFC’s, HFC’s)
Packaged in a blow molded
case with UV glasses, 2 “C” MAC-56100
batteries and sensor tip. $19999

$24999

Tool News | October-December 2021 27

Hand Tools Cutting Pliers Slip-Joint Pliers Tongue and Groove Pliers
High Leverage
CNL-337 (7”) Designed w/ Wire Cutting Shear CNL-424 (41/2”) $1699
$1999 & PermaLock® fastener that
CNL-338 (8”) eliminates nut and bolt failure. CNL-426 (61/2”) $1399
$2299
Box Joint CNL-526 (61/2”) CNL-420 (91/2”) $1699
CNL-437 (7”) CNL-528 (8”)
$2299 $1299 CNL-430 (10”) $1799
End Cutting
CNL-357 (71/2”) High Leverage CNL-440 (12”) $1999
$2499 Linesmen's
CNL-358 (8”) CNL-460 (16”) $3399
$2999 Less force required for cutting
With Xtreme Leverage CNL-480 (20”) $6499
Technology (XLT™)
Adjustable Wrenches Wiring Tools
CNL-367 (71/2”) CNL-908
CNL-368 (81/2”) w/ 20% Greater Jaw Capacity $1999
CNL-369 (91/2”) Comfortable Synthetic Rubber Code
CNL-3610 (101/2”) Blue® grip for convenience & firm Stripper & Cutter
$3499 handling. w/Ergonomic Handle

Cable Cutting Curved Diagonal Cutting CNL-806WCB (6”) CNL-957
CNL-911 (91/2”) Pliers $2499 $1999
$3499
8” Long Reach Pliers Forged Convex Head allows the user CNL-808WCB (8”)
to rock objects NEW knife & anvil $2999
Designed for long reach style cutting edge
applications & hard to reach spaces CNL-810WCB (10”) Stripper & Cutter
CNL-447 (73/4”) $3499
CNL-718 (Flat Nose) $2699 CNL-958
$2199 High Leverage CNL-812WCB (12”) $1499
CNL-449 (91/2”) $4499
$3499 Fence Tool Cutter, Crimper, & Stripper

CNL-E458 (8”) Wire Stretcher, Splicer, & (2) Cutters, CNL-959
Staple Starter & Puller & Hammer $2999
+ Center Cutting
CNL-85
$3399 $3499

CNL-748 (End Cutter)
$2799

Long Nose Pliers Adjustable Oil Welders Pliers 7pc Nutdriver Set
CNL-317 (8”) Filter Pliers
CNL-326 (6”) • Grove nose for superior High quality, durable clear plastic grip
$2499 • Right angle teeth grip spatter removal
Nutbuster® Pliers in all directions. CNL-ND7A
• Grips & Draws out wire
Parrot Nose is ideal for round • PermaLock® fastener eliminates • Spring Loaded SAE: 3/16” to 1/2”
surfaces. SAFE-T-STOP™ nut & bolt failure.
helps prevent finger pinch. Has CNL-360 $7999
Permalock® fastener that eliminates CNL-209 (9”) $2999
nut and bolt failure
• 4 Adjustments Little Champ® Pliers 6pc Screwdriver Set
CNL-410 (91/2”) • Fits filters up to 31/2” SCiNdLe-CE4u1ttSin(g4”)
$1999 $2999 • High quality, durable clear plastic grip
CNL-414 (14”) $1999 • Slotted - (1/4” x 4”),
$3499 CNL-212 (12”) SCnNiLp-eEN50oSse(6”)
Crimping and $3399 (1/4” x 6”), & (3/16” x 3”).
Cutting Tool • 5 Adjustments • Phillips - (#2 x 4”),
CNL-909 • Fits filters up to 41/2”
$2499 (#2 x 6”), & (#1 x 3”)
$2499
CNL-215 (15”) CNL-SD6A
$4499
• 6 Adjustments
• Fits filters up to 51/2”

$2999
CNL-2012 (12”)

• 30° angled head
• 5 Adjustments
• Fits filters up to 33/4”

$2999

Long Reach Flush Cutting
Pliers

Cuts plastic & 10-20 AWG copper
wire cleanly.

CNL-758 (71/2”)
$3499

28 Tool News | October-December 2021

Locking C-Clamps Locking PLIERS Hand Tools
w/Swivel Pads C-Clamps
PART SIZE PRICE 3pc Hose Grip Pliers Set
VSG-24SP 24” $57.99 PART SIZE PRICE • (1) 60775 11 in. Small Hose Grip Pliers
VSG-18SP 18” $44.99 VSG-24R 24” $54.99 • (1) 60777 11 in. Medium Hose Grip Pliers
VSG-11SP 11” $29.99 VSG-18R 18” $44.99 • (1) 60778 11 in. Large Hose Grip Pliers
VSG-9SP 9” $24.99 VSG-11R 11” $29.99 TIT-60776
VSG-6SP 6” $19.99 VSG-9R 9” $24.99 $2799 Also available individually for
VSG-6R 6” $15.99
5pc Locking Pliers Set $999 each
Long Nose Locking
Packaged in a Roll-up Canvas Bag Pliers & Wire Cutter 3pc Long Nose Pliers Set
Set includes 10” straight jaw, 10” VSG-9LN (9”) • (1) 60771 11 in. Straight Long Nose Pliers
curved jaw, 7” curved jaw with wire $2499 • (1) 60773 11 In. 45° Long Nose Pliers
cutter, 6” long nose pliers, and 5” VSG-6LN (6”) • (1) 60774 11 In. 90° Long Nose Pliers
curved jaw locking pliers $1999 TIT-60770 Also available individually for
VSG-4LN (4”) $2499 $999 each
VSG-68 $1499
$9999 3pc 16” Long Nose Pliers Set
• (1) 60781 16 In. Straight Long Nose Pliers
• (1) 60782 16 In. 45° Long Nose Pliers
• (1) 60783 16 In. 90° Long Nose Pliers
TIT-60787 Also available individually for
$3599 $1299 each

Locking Chain Clamp Curved Jaw Locking 11in Flat Nose 5pc Set
Pliers & Wire Cutter
Overall Length of chain is 18” VSG-10WR (10”) TIT-60779 Includes Pouch
$1999 • (1) 11 in. Straight Long Nose Pliers
VSG-20R VSG-7WR (7”) 11in Diagonal Cutting • (1) 11 in. Flat Nose Pliers
$3499 $1999 • (1) 11 In. 45° Long Nose Pliers
VSG-5WR (5”) TIT-60780 • (1) 11 In. 90° Long Nose Pliers
15” Extended $1999 Your Choice • (1) Large Hose Grip Pliers
Locking Pliers VSG-4WR (4”) $999
TIT-60762 (Straight) $1399 TIT-60769
TIT-60763 (45°) $4499
TIT-60764 (90°) Curved Jaw Locking Pliers
$1799 VSG-10CR (10”) Precision Plier Set
VSG-7CR (7”)
$1799 Set 7400 includes:
• 7410 – 4” Diagonal pliers, thin
Straight Jaw
Locking Pliers nose, semi flush
VSG-10R (10”) • 7420 – 4.5” Curved long nose
VSG-7R (7”)
$1999 pliers with serrated jaw
• 7422 – 4.75” Duckbill style
Large Jaw
Locking Plier pliers with smooth jaw
• 7418 - 5.75” Needle Nose
Great for “stuck” oil filters
pliers with smooth jaw
VSG-12LC • 7428 – 4.75” Long Nose Pliers
$2499
8” Locking Sheet with cutter and standard jaw
Metal Tool • 7440 – 4.5” Long reach
VSG-8R
$2499 angled pliers with flush cutter
9” Locking Sheet
Metal Tool SKT-7400
VSG-9R $11999◉
$2499
Heavy-Duty C-Clamps 5pc General Purpose Pliers Set

• Malleable steel w/ a durable Set includes:
black enamel finish Slip Joint Pliers - 7”
Tongue and Groove Pliers - 7”, 10”
• Chrome plated spindle & handle. Long Nose Pliers with Cutter - 8”
Heavy Duty Angled Diagonal Cutter - 7”
TIT-51573 (4”)
$999 SKT-17835
TIT-51574 (5”) $11999◉
$1199
TIT-51575 (6”) Diagonal Cutting Pliers 6”& 8” Long Nose Pliers
$1499 IMP-03-MPD (5”) IMP-03-LN6 (6”)
$499 $499
Pistol Grip Pliers IMP-03-DP8C (7.5”) IMP-03-LN8C-1 (8”)
$599 $599
Ergonomic Pistol Grip handles 6”& 8” Slip Joint Pliers
provide greater gripping power while IMP-03-SJ6 (6”)
reducing hand fatigue $499

TIT-11400 (9”) IMP-03-SJ8 (8”)
$599
• Crimper 10” Groove Joint Plier
IMP-03-GJ10
$1199 $999

29Tool News | October-December 2021

Hand Tools KNIPEX PLIERS Cobra Pliers Set

Pliers Wrenches KNI-8603250SBA MAX W OAL Includes: 87 01 180 71/2”
• Lever transmission greater than 10 - 1 for $6499 87 01 250 10”
strong gripping power 2” 10” 87 01 300 12”

• Chrome vanadium electric steel, forged, KNI-8603300SBA 23/8” 12” KNI-002006US1
oil-hardened $8499 33/8” 16” $12499
MAX W OAL KNI-8603400US
KNI-8603125SBA $16999 Cable Shears
$5499 7/8” 5”
For cutting copper and aluminum cables
KNI-8603150SBA 1” 6” KNI-8643250SBA 13/4” 10” Cables up to 51/64” (20 mm) can be cut in one-hand operation
$5999 15° Angled
KNI-8603180SBA KNI-9511200SBA (8”)
$5999 13/8” 71/4” $7499 $6499
KNI-8601250SBA KNI-9511165SBA (6.5”)
Black Oxide Finish 2” 10” $3999
$6499 KNIPEX CoBolt® Compact Bolt Cutter

4” Long Knipex Cobra® Pliers Induction hardened edges cut hard, soft and piano wire
Cuts material like bolts, nails, rivets, etc. up to 5.2 mm dia.
• Optimum access in the narrowest spaces
• Gripping capacity of 1” KNI-7101200SBA (8”)
• Box joint: high quality and durability provided by dual guide $5999
• Fine adjustment with 11 adjustment positions KNI-7101250SBA (10”)
$7999
KNI-8700100SBA Extra Long Needle Nose Pliers

$3999 For gripping, adjustment and assembly work in hard to reach areas thanks
to slim, very long design
Cobra® Wrenches
KNI-2871280SBA (11”)
• Box-joint design: high stability because of double guide $4999
• Reliable catching of the hinge bolt: no unintentional shifting
• Chrome vanadium electric steel, forged, multi stage oil-hardened Long Nose Pliers

KNI-8701125SBA MAX W OAL KNI-8701300SBA MAX W OAL Induction hardened cutting edges for soft, medium, and hard wire.
$3499 $5499
1” 5” 2” 12” KNI-2611200SBA (8”)
$3499
KNI-8701150SBA 11/4” 6” KNI-8701400SBA 23/8” 16” Installation Pliers
$3499 $9999
KNI-8701180SBA Features cable shears, stripping holes, and crimp die for end sleeves
$3999 11/2” 71/2” KNI-8701560US 33/8” 22”
$14999 KNI-13818SBA (8”)
KNI-8701250SBA $7499
$3999 2” 10” Super Knips®

Raptor® Plier Precision pliers for ultra fine cutting work, e.g. in
electronics and fine mechanics
The Raptor Pliers combines the convenience of the comfortable
push-button adjustment on the workpiece and the function of an KNI-7861125SBA (5” )
all-purpose tightening tool. $3499
Wire Rope Shears
KNI-8741250SBA (10”)
$4499 Cutting edge hardness approx. 64 HRC
For wire rope with Ø 4.00 / 1960 Nmm²
High Leverage Diagonal Cutter
20% less force required compared to other diagonal cutters KNI-9562160SBA
$4999
KNI-7401200SBA (8”) KNI-7421250SBA Forged Wire Stripper
$3999 (10” Angled)
KNI-7401250SBA (10”) $4999 • Cuts 6-32 and 8-32 screws without threading and can be cut
from either the front or the back
$4999
• Strips 10 to 20 AWG – both solid and stranded
Ear Clamp Pliers • 8” Long
• High-grade special tool steel, forged, multi stage oil-hardened
For the simple and reliable mounting of 1-ear and 2-ear clamps
(Oetiker system or similar) KNI-13718SBA

KNI-1098i220 (83/4”) $5999
$2399
KNI-1099i220 (83/4” w/side jaw) Circlip Pliers 4pc Set
$2999
Includes:
Spring band Clamp Pliers Canvas Pouch
48 11 J1 For internal circlips in bore holes
Fitted with locking device. Can be used for standard, space-saving, spring 48 11 J2 For internal circlips in bore holes
wire hose clamps and for spring band clamps up to 70 mm nominal size. 49 11 A1 For external circlips on shafts
49 11 A2 For external circlips on shafts
KNI-8551180ASBA (7”)
$8499 KNI-001957
KNI-8551250AFSBA (10” locking) $11499
$12999

30 Tool News | October-December 2021

Snap Ring Pliers Sets Retaining Ring Pliers CNL-926 (6”) Individual Combination Hand Tools
AST-9401 (8pc) (5) pairs of color coded External: 1/8” to 1” Wrenches
interchangeable tips. Changes from Internal: 1/4” to 1”
• Removes internal and Internal to External w/ a switch of a tab. Your Choice Raised panel forged alloy steel
external snap rings. CNL-929 (10”) $2999
External: 11/2” to 4” Metric Sizes
• Includes 2 Hook & Picks Internal: 113/16” to 4” 6mm UP TO 25mm
Your Choice SAE Sizes
$3499 $5999 1/4” UP TO 21/2”
A(2SpTc-9L4a0rg2e) CNL-927 (8”) Spindle Snap Ring Pliers For
$4999 Ford Super Duty 15pc 12pt COMBINATION
External: 1/4” to 2” Wrench Sets
CRIMPRO™ Internal: 3/8” to 2” Used to Replace the Spindle Snap SKT-86255
Wire Crimping Tools Rings Found on 2007 and Newer Ford
Your Choice Super Duty Pickups. • Sizes: 1/4” to 1”
• 7” OAL $3499 LIS-38700
• Gripping nose - to pull, twist, 4pc Large Internal/ $27999
External Snap Ring $4999 SKT-86265
bend, and shape. Pliers Set
• Crimper & Stripper for 12-20 AWG 6pc Convertible Retaining • Sizes: 8-22mm
• Includes Internal and External Ring Pliers Set
insulated and non-insulated wire. straight and 90 degree bent pliers $24499
• Cutter below pivot point with a 0.90” tip size Tip Sizes: .038”, .047”, .070”, & .090”
• 3” long pliers, 0.09” (2.3mm) tip size 7pc JUMBO Wrench Sets
OTC-5950S 6pc
$2999 AST-94222 SKT-7600 • High density, dropped forged alloy steel.
• Includes Canvas Pouch
The angled feature allows Sizes 0° & 90°
access to close quarters and $5499 $14999◉ SUN-9707A(SAE)
facilitates superior crimps.
Adjustable Non-Marring Hose Clamp Pliers Set • Sizes: 1-5/16” to 2”
OTC-5950A (angled) Precision Panel Clip Pliers
$3999 • Includes Cross-Slotted Jaw Pliers and SUN-9707MA(MM)
Composite shoulder design a Wide, Flat-Band Hose Clamp Pliers.
Plastic Clip Removal Pliers prevents panel damage • Sizes: 33, 34, 36, 38, 41,
Adjustable jaw opening for multiple • The clamps are held open with a 46, & 50mm
For easy removal of plastic push pin clip sizes ratchet locking mechanism. Jaws
type panel fasteners with center pins. Precision ground for slim low profile swivel to access hose clamps in any $17999
Also works on traditional clips. engagement position. 6pc SAE JUMBO Wrench Set
Built-in cutter
AST-9581 OTC-4502 • Sizes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, & 2”
LIS-42810 $1499 $3399
$1999 IMP-01-WJ6
Mini Flush Cutters Hose Clamp Pliers 2pc Fuel Line Clamp Set $11499

Use to flush cut small gauge • Unique Jaw design fits clamps up to • Stop flow from vacuum, brake, and Combination Wrench Set
wire, cord, cable ties, & more 2” (51mm) fuel lines. IMP-01-W15MW
Heat treated blades
Contoured cushion grip handles • Extra-heavy duty 5/64” (2mm) cable • Pinch and hold hose w/out damage. • Sizes: 6-24mm
Overall length: 5 in. • Bi-material grips with snap feature
OTC-4506 $6499
TIT-12445 MAY-28680 $1199
$799 Jumbo Angle Head
MSRP $108.27 2pc Locking Hose Clamps Wrench Sets
Transmission Linkage
Bushing Installer $8499 Includes: • Polished w/15° & 60° angled ends
• MVA7605 = 6”, works up to 1” dia. • Includes Canvas Pouch
Easily and safely push tough • MVA7607 = 8”, works up to 1-¼” dia.
nylon bushings into place. Works • Equip w/ angled jaws for accessibility SUN-9916 (SAE 6pc)
on different bushing sizes. • Applies up to 50lbs of force.
$• S1i5ze9s9:91◉3/8" - 17/8"
IMC-909 MTY-MVA7609
$3999 $2999 (SMUeNt-r9ic962p6c)

4pc Snap Ring Plier Set Flexible Hose • Sizes: 20-25mm
IMP-03-SRP46 Clamp Pliers
$2299 $5999
• Precision clamp on end of flexible (SMUeNt-r9ic972p7c)
cable allows for extended reach,
in order to remove plastic and/or • Sizes: 26-32mm
metal self tightening hose clamps.
$9999◉
AST-9409A 14pc Angle Head Wrench Sets
$4999
• Includes Canvas Pouch
Safety Wire Twisting Plier Terminal Crimper for Multi-Cable Hose
Weather Pack & Metri Pack Clamp Pliers SUN-9914A
Automatic action twist safety wire to Terminals 12 - 22 AWG
remove slack. Prevents damage to Features 3 cables and 4 • Sizes: 3/8” to 11/4”
wire & prevents loosening. A MUST • Has 4 wire crimping and 2 seal different jaw types and sizes
for nuts and bolts in critical & high crimping positions for use on most automotive $9999
vibration areas. tension hose clamps SUN-9914MA
• Thin profile Easily switch out cable and
IMP-03-SWP9 • Steel construction jaw designs for different • Sizes: 6-19mm
$2799 • Comfortable cushion grips applications
Ratcheting PVC $8499
Pipe Cutter TOO-18915 AST-94093 6pc JUMBO Angle Head
TIT-15063 $3499 $6999 Open End Wrench Set
$1399 IMP-01-AWJ6

• Sizes: 13/8”-2”

$11499

31Tool News | October-December 2021

Hand Tools WRENCH SETS

Fully Polished Wrench Sets KTP-A1211MR Wrench Sets
KTP-A1209SR Metric 16pc-12pt
SAE 14pc-12pt All Wrench Sets packaged in either a
• Sizes: 8-32mm Plastic Case or Nylon Pouch.
• Sizes: 5/16”-11/4” MSRP $274.18
MSRP $237.62 Stubby
$13499 IMC-710 (10pc SAE)
$11999
• Sizes: 7/16” to 1”
KTP-A1203SR KTP-A1203MR
SAE 13pc Metric 13pc IMC-8910 (10pc Metric)

• Sizes: 1/4” - 1” • Sizes: 8-24mm • Sizes: 10mm to 19mm
MSRP $164.15 MSRP $139.22 MSRP $46.33

$7999 $6999 $3499

KT Pro provides professional grade hand Super Thin Wrenches
tools that meet and exceed ANSI and DIN IMC-8109 (9pc Metric)

specifications • Sizes: 8-32mm

$3999
IMC-8308

(8pc SAE)
• Sizes: 3/8” to 15/16”

$5499

5pc Half Moon Wrench Sets 5pc SAE Flare Nut Wrench Sets
• Fully polished drop forged alloy steel
• Includes Canvas pouch • Sizes: 1/4” x 5/16” - 3/4” x 7/8”
SUN-9935 SUN-9935M
• Sizes: 5/16” to 7/8” • Sizes: 8-22mm SKT-381
$9999◉

$3499 $3999

Service Wrenches Angle Head Wrenches 14 Piece Wrench Sets Jumbo Combination
IMC-9215 (15pc SAE) IMC-9810 IMC-816 • Raised panel design Wrenches
• Sizes: 3/4” to 15/8” (10pc SAE) (16pc Metric) • Includes Canvas pouch
IMC-9515 (15pc Metric) • Sizes: 1-5/16” to 2” Carbon Steel Construction
• Sizes: 8-23mm SUN-9714A
• Sizes: 20-30mm & 34-36mm • 15° and 60° • Sizes: 3/8” to 11/4” TIT-17289 7pc Metric
$9999
$15999 $28999◉ $6999 Sizes included: 34, 36, 38, 41, 42,
SUN-9715A 46, and 50 mm
• Sizes: 6mm to 19mm
$5999 $12999◉
TIT-17290 6pc SAE

Sizes included: 1-3/8, 1-1/2,
1-5/8, 1-3/4, 1-7/8 and 2 inch

$11999◉

X-Frame 6pt Ratcheting Wrenches 7pc SAE Set Crowsfoot Wrench Set
3/8” Drive
• I-Beam handle distributes added force evenly • Sizes 3/8” - 3/4” IMC-7412 (12pc)
for superior strength.
SKT-80049 • Sizes: 8-19mm
• Dual-opposing pawls work in tandem to provide $14999◉
added strength. IMC-7711 (11pc)

• 1.7° Arc Swing provides 216 ratcheting positions! • Sizes: 3/8” - 1”
MSRP $55.26
12pc Metric Set
$4499
• Sizes 8-19mm

SKT-80019
$27999◉

CROWSFOOT SETS SAE Crowsfoot Sets Metric Crowsfoot Sets

1/2” Drive • Fully polished drop forged alloy steel • Fully polished drop forged alloy steel
IMC-7814 (14pc) • Reusable blow mold storage tray • Mounted on a convenient storage rail

• Sizes: 11/16” - 2” SUN-9720A SUN-9730A

$12499 • Sizes: 1” - 13/8” • Sizes: 24-30mm & 32mm
IMC-7917 (17pc)
$7999 $6999
• Sizes: 20-46 mm SUN-9722A SUN-9740A (Jumbo)

$13999 (Jumbo) • Sizes:34-36, 38, 41, 42,
Flare Nut Crowsfoot Sets • Sizes: 15/8” - 21/4” 46mm

• Fully polished drop forged alloy steel $11999 $9999
• Mounted on a convenient storage rail
14 Piece 1/2 in. Drive SAE Jumbo
SUN-9708 (8pc) Crowsfoot Wrench Set

• Sizes: 3/8” to 7/8” • For use in confined areas or applications where
challenging angles are present
$3499
SUN-9710M (10pc) • Stamped sizes in each wrench for quick identification
• Constructed from hardened and forged steel
• Sizes: 10-19mm • Includes storage case

$3999 TIT-17298 SAE

32 Tool News | October-December 2021 1-1/16 inch to 2 inch

TIT-17299 Metric

27mm to 50mm

$9999◉

Super Thin Adjustable Adjustable Wrenches MISC WRENCHES Hand Tools
Wrench
IMP-02-AW6 (6”) $799
• Drop Forged Alloy Steel
• Jaw and Handle thickness = .36” IMP-02-AW8 (8”) $899 Large Diameter Strap Flex-Head O2
• Jaw A = 9/16” - 1-9/16” Wrenches Sensor Wrench
• Jaw B = 1-1/16” - 2-1/16” IMP-02-AW10 (10”) $1199
• Non-Marring nylon belt • Designed for all oxygen sensors
IMC-629 IMP-02-AW12 (12”) $1799 prevents scratching and with 7/8”. hex
$3499 damage to finished surfaces
IMP-02-AW15 (15”) $2299 • Essential clearance for removal/
Extra Slim Jaw Adjustable TIT-21315 (12in) installation of oxygen sensors when
Wrenches IMP-02-AW18 (18”) $3399 it is positioned upward and inward
• Strap Length: 34in to the floor-board or when leverage
Designed to reach nuts and fasteners IMP-02-AW24 (24”) $5999 • Pipe Capacity: 2in is needed around an exhaust pipe
in tight spots with little clearance that • Tube Capacity: 9i
regular wrenches can’t reach. PIPE CAL-843
WRENCHES $1999 $2999
CNL-804S (4”)
$2499 Steel TIT-21316 (18in) Variable Pin Spanner
CNL-806SW (6”) TIT-21308 (8”) Wrench
$2999 $699 • Strap Length: 32.75in
TIT-21310 (10”) • Pipe Capacity: 5in • Universal Design, adjustable from
Wide Jaw Adjustable $999 • Tube Capacity: 8in 1-1/4”- 5”.
Wrenches TIT-21312 (12”)
$1499 $5999 • Works w/ a 1/2” drive ratchet or
• 50% wider & 30% more depth than TIT-21314 (14”) LIS-28500 breaker bar.
average adjustable wrenches. $1999
TIT-21318 (18”) • Ranges from 1”-65/8” • Comes w/ 3.5mm, 4mm, 4.5mm,
SUN-9611 (6”) $2499 5mm, 6mm, 7mm, & 10mm pins.
TIT-21324 (24”) $2499
• 34mm Max Jaw Opening $3999 OTC-6613
TIT-21336 (36”) $9499
$2699 $6499
SUN-9612 (8”) TIT-21337 (48”) LIS-60200 Spud Ratchets
$9999
• 38mm Max Jaw Opening Aluminum • Use with a 1/2” Drive Tool. 72 Tooth reversible ratchet
TIT-21334 (14”) • Removes and installs objects up 5 degrees of sweep for
$3499 $2999 working in confined areas
SUN-9613 (10”) TIT-21338 (18”) to 6-1/2” O.D. Black Oxide finish
$3999
• 50mm Max Jaw Opening TIT-21344 (24”) $2499 TIT-11077 3/8in. Drive,
$5499
$4999 TIT-21346 (36”) 10in. Long
SUN-9614 (12”) $9999
TIT-21348 (48”) TIT-11078 1/2in. Drive,
• 60mm Max Jaw Opening $19999
12in. Long
$5999 4pc Steel Pipe Wrench Set
$2999
Ratcheting Chain Wrenches • Includes sizes: 8, 10, 14 and 24 inch
OTC-6968 (12” Handle) • Durable enamel finish with precision Extendable
Ratchet Set
Grip Range 1/2” 4-1/2” OD milled, drop forged steel jaws and Adjustable Gland Nut • Plastic over-molded handle
I-beam handle design Wrenches • Includes 1/4”, 3/8” & 1/2”
$4499 • Heavy-duty ductile iron housing CTA-8600 • 72-tooth design
OTC-6969 (24” Handle) • Limited Lifetime Warranty
TIT-21304
Grip Range 3”-6-1/2” $6999

$8999

TIT-21370 (12” Handle) • Fits hydraulic cylinders on vehicles EZR-MR482
from 1” to 3-3/4” / 25mm to 95mm
• Chain Length: 17” • Reverses to work on 1/4” or 7/32” MSRP $101.99
• Grip Range: 2-4” O.D. 8pc Miniature pin-holes $8499
Ignition Wrench Set • 1/2” drive
$3499 $3499
TIT-21372 (24” Handle) 15° x 60°

• Chain Length: 21.65” SAE - 13/64” to 3/8”
• Grip Range: 2-6.5” VIM-V18
$2999
$5499
CTA-8605
Metric - 4mm-9mm Thumbwheel Ratchets
VIM-VM50 • Fits hydraulic cylinders on vehicles
$3499 from 2” to 6” / 51mm to 152mm. Great for Tight Spots

Adjustable Spud Wrenches • Reverses to work on 17/64” or SKT-49270 (1/4”)
21/64” pinholes. SKT-45172S (3/8”)
• Chrome Vanadium construction $3999
• Black oxide finish resists corrosion • 3/4” drive.

$5499

TIT-216 (16in) TIT-223 (3pc Set)
$3499
• 8in, 10in & 12in

$5999

33Tool News | October-December 2021

Hand Tools IMPACT ACCESSORIES

17 Piece Impact Adapter Set 8pc Impact Adapter Set 3pc Universal Joint Impact 3pc Low Profile Adapter Set
Socket Set
• Master Impact Extension set that includes 1/4”, • Includes: 1”F x 3/4”M, 3/4”F x 1/2”M, 1/2”F Includes: 1/4”, 3/8”, 1/2” Dr
3/8”, 1/2” adapters complete with universal x 3/8”M, 3/8”F x 1/4”M, 1/4”F x 3/8”M, • Includes 1/4”, 3/8”, & 1/2”
3/8”F x 1/2”M, 1/2”F x 3/4”M, 3/4”F x 1”M TIT-30936
TjIoTin-t8a1nd4e8x3tensions TIT-40160 $1099
• Comes in a sturdy blow-molded case $2999
$7499
TIT-40000
$6999

3/8” Sq. Dr. to 1/4” Hex Dr. 1/2” Sq. Dr. to 1/4” Hex Dr. Universal Power 1/4” Hex 3 pc. Impact Stubby
Quick Change Impact Quick Change Impact Driver Socket Adapter Set
Adapter Adapter
TIT-12034 TIT-12039 1/4” Square Drive • Includes: 1/4”, 3/8”, 1/2” Dr
$1199 $1499 1/4” Locking Hex Bit Holder
Pull Back Locking Collar To TIT-12061
Release Bits $699

VIM-UPH4
$1799

3pc Impact Socket 1/4”, 3/8”, 1/2” Impact Adapters TIT-49003 TIT-12086 (6” OAL)
Adapter Sets TIT-15210 (3” OAL) $999
(23/4” wobble)
• Includes: 1/4”, 3/8” & 1/2” adapters • 1/4” Shank
• Detent ball for secure socket retention $699
$1999
TIT-12082 (23/4” OAL)
$499

TIT-49006 SHOCKWAVE™ Impact Sets

(6” wobble) • The Wear Guard Tip™ delivers increased wear
resistance which protects the fit over the life of the bit.
$1499
• The Shockzone™ is optimized for each tip type and
TIT-15206 (12” OAL) length of driver bit to absorb peak torque and prevent
$1999 breaking

12pc TORX Impact 22pc Impact Driver Bit Set
Socket Set MIL-48-32-4016
$3999
Includes: 56pc Impact Drill/Driver Bit Set
• 1/4” Drive: T10, T15, T20, T25, T27, T30 MIL-48-32-4017
• 3/8” Drive: T40, T45, T47, T50, T55 $9499
• 1/2” Drive: T60
1/2” Dr Hex Bit 3/4” 5 Piece Hex Bit Impact Sets
SUN-1820S Impact Sets SUN-4506 (SAE
SUN-2638 (SAE)
MSRP $59.62 SAE: 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
• Sizes: 1/4”, 9/32”, 5/16”,
$4499 3/8”, 7/16”, 1/2”, 9/16”, SUN-4507 (MM)
5/8”, 11/16” and 3/4”
Stubby Torx & Hex Metric: 14, 17, 19, 22, 24 mm
Impact Socket Sets SUN-2639 (MM)
AST-94410T(10pc TORX) $9999
• Sizes: 6, 7, 8, 10, 12, 14,
• 3/8” Dr.; T25 - T70 15, 17, 18, & 19mm
- Your Choice
$3999
AST-94418H (18pc HEX) $8499

• 3/8” Dr.; 6 - 19mm; 1/4” - 3/4” NANO Impact Socket Sets 3/8”Dr Nano Pinless Universal
Impact Sockets
$4999 • At 1.10” (28mm) long, sockets are 37% shorter
than shallow impact sockets and 15% shorter • Astro’s Nano form factor, up to 11% shorter than
than other stubby impact sockets. standard low-profile universal impact sockets
• All sockets feature a 22mm (7/8”) outside hex
for increased access when used with a wrench. • Forged CRO-MO with lifetime warranty
• Standard: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”
AST-78310 (3/8” AST-78314 (3/8”
and 3/4”
Dr., 10pc SAE) Dr., 14pc Metric)
• 1/4” through 3/4” • 6mm through 19mm AST-78340
$6499
$2999 $3499
• Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18 and
AST-78211 AST-78215 (1/2” 19mm

(1/2” Dr., 11pc SAE) Dr., 15pc Metric) AST-78344
• 3/8” through 1” • 10mm through 24mm $7999

$3999 $4999

34 Tool News | JOucltyo-bSeerp-tDeemcbeemrb2e0r221021

IMPACT SOCKETS Individual Sockets Hand Tools

Complete your set or add to it with
individual sockets in many sizes and styles!

Available in SK, Sunex,
and KT PRO

SKT-46164 SKT-4519 SKT-4062

SUN-2651 SUN-3500
SUN-4684 SUN-3580

SKT-4090 SKT-33300 SKT-33351

SUN-2668 SUN-3329 SUN-2858

SKT-4047 SKT-4039

SUN-5692 SUN-2569

SKT-34350 SKT-4051

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
SKT-45674 3/8" 3pc Extension Set $54.99 SUN-3500 3/8" 4pc Extension Set $59.99
SKT-46164 1/2" 4pc Extension Set $79.99 SUN-2500 1/2" 4pc Extension Set $79.99
SKT-4519 6pc U-Joint Adapter Set $179.99 SUN-3361 3/8" 12pc DEEP (5/16"-1") $64.99
SKT-4090 3/8" 40pc MASTER Set $269.99◉ SUN-3325 3/8" 25pc Std/Deep (5/16-1") $134.99
SKT-4062 $94.99 SUN-3329 3/8" 29pc Std/Deep (8-22MM) $134.99
SKT-4082 3/8" 12pc (8-19MM) $114.99 SUN-3580 3/8" 80pc MASTER Set $294.99◉
SKT-33300 3/8" 12pc Deep (8-19MM) $179.99◉ SUN-2858 1/2" 13pc 8pt Deep (3/8-1-1/8") $159.99
SKT-33351 3/8" 8pc Swivel (5/16-3/4") $199.99◉ SUN-2650 1/2" 13pc (7/16-11/4") $49.99
SKT-4037 3/8" 10pc Swivel (10-19mm) $239.99◉ SUN-2651 1/2" 13pc DEEP (7/16-11/4") $89.99
SKT-4047 $424.99◉ SUN-2652 1/2" 14pc (10-27MM) $49.99
SKT-4039 1/2" 25pc (8-36mm) $229.99◉ SUN-2653 1/2" 14pc Deep (10-27MM) $89.99
SKT-4049 1/2" 25pc Deep (8-36mm) $314.99◉ SUN-2668 1/2" 39pc MASTER SAE $259.99
SKT-34300 $379.99◉ SUN-2669 1/2" 39pc MASTER Metric $199.99
SKT-34350 1/2" 19pc (3/8-11/2") $399.99◉ SUN-4683 $399.99◉
SKT-4051 1/2" 19pc Deep (3/8-11/2") $299.99◉ SUN-4684 3/4" 17pc (1-2") $299.99◉
SKT-4053 1/2" 13pc Swivel (1/2-11/4") $279.99◉ SUN-5692 3/4" 17pc (26-46mm) $399.99◉
1/2" 15pc Swivel (10-24mm) SUN-2568 $279.99◉
1/2" 28pc Std/Deep (3/8-11/4") SUN-2569 1" 21pc (3/4-2") $214.99◉
1/2" 30pc Std/Deep (8-24mm) 1/2" 43pc MASTER (3/8-11/2")
1/2" 43pc MASTER (9-30mm)

35Tool News | October-December 2021

Hand Tools RATCHETS / SOCKETS Extendable Quick TIT-12072 (3/4”)
Release Ratchets
Premium Reversible • Telescopes in 5 Increments 19-1/2” to 30-1/2”
Ratchets • Push Button, Quick-Release Head
TIT-12070 (3/8”) TIT-12074 (1/2”) $9999◉
8-1/2” to 12-1/2” 12” to 17-1/2” TIT-12073 (1/2”)
$2499 $3499
18” to 24”

$3999

PART DESCRIPTION PRICE

SKT-40970 1/4” Dr. 4.5” Long $54.99 Nano Ratchets by Astro Standard 1/2”
SKT-40971 1/4” Dr. 6.5” Long $64.99 Nano 1/2”
SKT-45170 3/8” Dr. 7.6” Long $69.99 • The Nano ratchet heads are 50% the size of Standard 3/8”
SKT-42470 1/2” Dr. 10.3” Long $89.99 the most popular competition ratchets of the
SKT-42472 1/2” Dr. 17.6” Long Flex $124.99 same drive
• 72 tooth, quick-release socket retention, solid
teardrop handle, full chrome polish finish
• Exceeds ASME torque standards despite its
miniature size
AST-91410 (1/4” Drive 10” Long)
Premium Ratchets Extendable Monster $1999 Size Comparison
• Features: 90 teeth, anodized aluminum Ratchets AST-93808 (3/8” Drive 8” Long) AST-91210
handles, Swivel Ratchets feature a quick- $1999 (1/2” Drive 10” Long)
release. • Extends from 24” to 40” AST-93812 (3/8” Drive 12” Long)
TIT-12161 TIT-12162 • Knurled handle for superior grip $2499
• 24-tooth design
3/8” Dr x 12in 1/2” Dr x 16in • Limited Lifetime Warranty $2499

$3999 $5499 EZR-MR34 (3/4” Dr)

*Replacement Head: RK34 1/4” Dr 4” Long Micro 12pc Aluminum Colors Display
Swivel Ratchets TIT-11314
$13499

• Micro reversible ratchet $21999
• 90 Tooth
LP90™ Series Ratchets 1/2” SKT-80220 • Unique swivel head design Also Available
$11999 Individually (Not Carded)
Innovative 90 tooth ratchet mechanism 15” Flex|SKT-80300 allows for use in confined areas TIT-11314-BL (Blue)
• Low profile and 4˚ arc swing for ultimate $15999 TIT-11314-GR (Green)
24” Long|SKT-80222 Black Alloy Steel TIT-11314-OR (Orange)
access in the tightest spaces $17999 TIT-11313 (Carded) TIT-11314-RD (Red)
24” Flex|SKT-80310 $1499
SKT-80180 $17999 $1999
Blue Anodized
1/4” $6999 Aluminum
Flex|SKT-80280 TIT-11316 (Carded)
$8999 $1999
SKT-80200
$8999 62 Piece 3/8” and 1/4” Drive Standard
and Deep Metric Chrome Socket Set
3/8” 11” Flex|SKT-80290
$11999 • 4-15mm 1/4” Dr Sockets
15" Long|SKT-80203 • 6-22mm 3/8” Dr Sockets
$12499 • Includes ratchets, extensions, and adapters

Complete Mechanics Tool SKT-94562
Sets by: $34999◉

94pc SET 60pc 1/4” Dr. SAE & Metric Set 1/4” Dr. SAE & Metric Socket Set
SKT-91848 (48pc 6pt)
Includes: 3/8” 45 tooth ratchet, • Ratchet, (2) Extensions {2” & 6” }, Universal Joint,
(16)1/4” sockets, (11)3/8” sockets, & (2) Adapters • Includes: 4.5” Ratchet, (2) Adapters - 1/4”F
3” extension, Reducing adapter, x 3/8”M & 3/8”F x 1/4”M, Thumb-wheel,
Magnetic bit driver, (40) Bits (18) • (15) 6pt. Shallow: 4mm - 16mm Universal, & (2) Extensions - 2” & 6”
Hex keys &Storage Case. • (13) 6pt. Shallow: 1/8” - 5/8”
• (14) 6pt. Deep: 4mm - 15mm • Shallow: 3/16” to 9/16”; 4mm to 15mm
CNL-39070 • (12) 6pt. Deep: 1/8” - 9/16” • Deep: 1/4” to 9/16”; 6mm to 15mm
$6999 MSRP $341.04
SKT-91860
132pc SET $26999
MSRP $494.02
Includes: 3/8” 45 tooth ratchet,
(20)1/4” sockets, (21)3/8” $35999◉
sockets, (2)Spark plug sockets,
3” & 6” extensions, Reducing 49pc 3/8” Dr. SAE &
adapter, Magnetic bit driver, (50) Metric Socket Sets
bits , (18)hex keys, (10) combo
wrenches & Storage Case. • Includes: 7.5” Ratchet, (2)
Extensions - 3” & 6”, 3/8”M
CNL-39067 Thumbwheel, & Universal
$11999
• Shallow: 1/4” to 7/8” & 6 to 19mm
• Deep: 3/8” to 7/8” & 10 to 19mm

171pc SET SKT-94549
$31499
Includes: 1/4” & 3/8” & 1/2” 45 tooth
ratchets, (20)1/4” sockets (35) 47pc 1/2” Dr. SAE & SKT-4147 (12pt)
Standard & deep 3/8” sockets, Metric Socket Sets SKT-4147-6 (6pt)
(12)1/2” sockets, (2) Spark plug
sockets, 3” extension, Magnetic • Includes: 10.3” Ratchet MSRP $705.79
bit driver,(60)bits, (18)hex keys, & (2) Extensions - 2” & 5” Your Choice
(12) combo wrenches, Magnetic
parts tray & Storage Case. • Shallow: 1/2” to 1-1/8” & $51499
10 to 24mm
CNL-39053
$18999 • Deep: 1/2” to 15/18” &
10 to 19mm

36 Tool News | October-December 2021

44pc 1/4” Dr. SAE & 47pc 3/8” Dr. SAE & 47pc 1/2” Dr. SAE & Metric Hand Tools
Metric Socket Set Metric Socket Sets Socket Sets

• Includes: 5.5” Ratchet & • Includes: 8” Ratchet & • Includes: 10” Ratchet &
(2) Extensions - 2” & 6” (2) Extensions - 3” & 6” (2) Extensions - 2” & 5”

• Shallow: 3/16” to 9/16”; 4mm to15mm • Shallow: 1/4” to 7/8” & 6 to 19mm • Shallow: 1/2” to 1-1/8” & 10 to 24mm
• Deep: 1/4” to 9/16”; 6mm to 15mm • Deep: 3/8” to 7/8” & 10 to 19mm • Deep: 1/2” to 15/16” & 10 to 19mm

KTP-A2505CR KTP-A3505CR KTP-A4505CR
KTP-A3005CR (12pt) KTP-A4005CR (12pt)
MSRP $70.59
MSRP $124.90 MSRP $179.71
$5999
$9999 $14999

KT Pro provides professional grade hand tools that
meet and exceed ANSI and DIN specifications

VW & Audi Head 9pc XZN Triple Triple Square
Bolt Tool Square Sockets Socket Sets
VIM-XZN100 (8pc)
• 6-point bit for R&R on • 1/4” dr, 4 & 5mm
cylinder head bolts. • 3/8” dr, 6, 8, & 10mm • 3/8” Drive Stubby
• 1/2” dr, 12, 14, 16, &18mm • 4mm-16mm.
• 10mm polydrive
TIT-16138 (Stubby Impact) $3999
VIM-V3452 Your Choice
$999 $2999

13pc Torx Plus 4pc 1/2” Dr. Square Drain 50pc Torsion
• 1/4” & 3/8” Dr. Bit Holders Plug Socket Set Impact Bit Set
• TP8 to TP55
4pc 1/2” Dr • Includes: Phillips,
TIT-16036 • Male Sq. 8mm,10mm, & 1/2” Slotted, Square, Torx,
$1299 • Female Sq: 10mm Hex, Adapters & Chucks

IMC-3304 TIT-16251
$1999 $7499

148pc Master Bit Set Ultra Access 16pc Socket & Ratchet Set Nut Setter Sets
VIM-NS100 (SAE)
Assortment of the most popular, Uni-Fit® Universal Drive:
& hard to find bits, plus a 1/4” drive 13 Sockets = over 47 Fasteners! • Sizes: 1/4” to 9/16”
socket adapter & 3-1/2” Magnetic • (13) Uni-Fit Pass-Thru Sockets
Quick-release bit holder. • Sizes: 8-22mm & 5/16”-7/8” VIM-NSM100 (Metric)
• (1) Pass-Thru Reversible Ratchet
TIT-16148 • Low-profile & offset handle • Sizes: 8-14mm
$5499 • (1) 3” Pass-Thru Socket Extension
• (1) 3/8” Dr. Quick Release Ratchet Adapter $3999

CNL-39100

MSRP $60.37

$4999

26pc Ratcheting Precision Deep External Star Sizes include: 8pc External TORX Plus Socket Set
Screwdriver Set Socket Sets 3/8 in Dr: E11, E12, E14, E16
1/2 in Dr: E18, E20, E22, E24 • Black manganese phosphate finish offers
• For use with a wide range of projects For servicing inverted superior protection and corrosion resistance
including automotive, engineering, & E-series fasteners TIT-68302 compared to black oxide
electronic applications. Sizes include: $2199
1/4in. Dr: E4, E5, E6, E7, • Laser-etched markings are easy to read
TIT-16092 E8, E10, E11 • Includes socket storage rail
$1199 • Impact grade
TIT-66320 Sizes include:
$1199 • (3) 1/4 in Dr: EP6, EP7, EP8
• (4) 3/8 in Dr: EP10, EP12, EP14, EP16
• (1) 1/2 in Dr: EP18

TIT-17418
$2499

100pc Security Bit Set 36pc S2 Steel Bit Set 11pc Offset Bit Driver Set
w/Micro Ratchet
• Essential for car, machine L-shape driver handle provides
tool, household appliances, • 72 tooth design, exceeds ANSI straight and 90 degree driving
and electronics repairs. specs (14) Torx (1 ea. Tamper Phillips: PH1, PH2, & PH3
Proof & Standard) T10 - T40 Slotted: 1/8, 5/32, & 3/16 inch
• Chrome vanadium adapters Hex: 3 & 4 mm
w/ satin finish • (6) Hex: 5/64” -1/4” Star: T15 & T20
• (6) PH: 1(2pc), 2 (2pc), 3 (2pc)
AST-9448 • (6) PZ: 1(2pc), 2 (2pc), 3 (2pc) TIT-16091
$1999 • (4) SL: 1/8”-1/4” $1499

SUN-9726
$3999

37Tool News | October-December 2021

Hand Tools 1/4” Hex Bit Sets SKT-19731 Ball-End Long Multi-Drive 12pc Torx-PLUS Set
SKT-19732 SKT-19748
10pc: 1/16” to 1/4” • 1/4”: T8, T10, T15, T20, T25, T27, & T30
6pc: 2mm to 5mm 8pc: 3mm to 10mm • 3/8”: T40, T45, T50, & T55
$9999◉ • 1/2”: T60
$5999◉ $14999◉
SKT-19751 SKT-84232
$16499◉
7pc: 1/8” to 3/8”

$11499◉

29pc Master Hex Socket 14pc 6” Hex Driver Sets 23pc Metric Hex Set
Set VIM-HXLM100 (Metric)
• 2mm - 22mm,
Sizes: 2mm to 19mm & 3/32 to 3/4 • (7) hex & (7) ball-hex: 3-10mm • Bits are made from S2 Steel, The

VIM-HMS26 VIM-HXL100 (SAE) Strongest Steel Available.
$9999 • Satin Chrome finish
• (7) hex & (7) ball-hex: 1/8”-3/8” • 1/4”, 3/8” and 1/2” Square Drives
Your Choice
VIM-MMS23
$7999
MSRP $151.49

$9999

Torx Socket Sets 18pc Long 5pc MorTorq Super Socket Set 53pc MASTER
• 9pc 4.5” Long T10 thru T50, TORX® SOCKET SET
10pc Stubby Sizes: M0, M1, M2, M3, M4, all 3/8” square drive,
• 1/4” Drive Sizes: T10 - T50 9pc 8” long T10 thru T50, black all packed on socket rail • Updated set includes external Torx PLUS
bits and chrome holders. Services new fasteners found on many GM, 1/2” Sq Dr EP24 for 2017+ Ford Pickup Beds
VIM-HCT1050 Chrysler, BMW, Nissan, Honda & Fiat.
$3999 VIM-V458L-SET • Includes Torx, Torx-Tamper-Resistant, &
$9999 CTA-8140 Torx-Plus Bits (14pc each): 1/4” dr T6-T30;
$3499 3/8” dr T40-T55; & 1/2” dr T60

• Plus Torx External Sockets (12pc) : 1/4” dr
E4-E8; 3/8” dr E10-E20; & 1/2” dr E22-E24.

OTC-5900APLUS
$11999

SureGrip® 26pc Screwdriver Set
Screwdriver Sets • (7) Slotted
• (5) Star
• Comfortable square handle, for secure grip even w/ greasy hands. • (9) Phillips
• Nickel-chrome plated for corrosion protection • (3) Square
• Straight Pick
6pc Combo
SKT-86320 • Offset Pick
• Plastic rack + clamshell
$6499
5pc Long Reach TIT-17203
SKT-86321 $4999

$6999 SCREWDRIVERS
9pc Combo
SKT-86006
$13999
Low Profle Screwdrivers 6pc Heavy Duty 6pc Screwdriver Set
Screwdriver Set
• Mayhew’s flat, low profile screwdrivers feature • (4) Slotted: 3/16” x 3”, 3/16” x
an innovative design for hard-to-reach areas. • (3) Slotted: 7/32” x 4”, 1/4” x 4”, 1/4” x 6”
4”, 1/4” x 6”, 5/16” x 7”
• Ideal for automotive assembly, small engine • (2) Phillips: No.1 x 3/16” x 3-1/8”
repairs, dash and door actuator work, and more. • (3) Phillips: No.1 x 3”, • No.2 x1 /4” x 4”
No.2 x 4”, No.3 x 6”
KTP-31216MR
KTP-30206MR $1999
$3499
MAY-16990 1/4” Slotted
MAY-16991 #1 Phillips
MAY-16992 #2 Phillips
$1499

9pc Screwdriver Set 6-in-1 Screwdriver KT Pro provides professional grade hand
tools that meet and exceed ANSI and DIN
Assorted slot & phillips screwdrivers Slot, phillips, and nutdriver
specifications
IMP-18-SD8N IMP-18-SD6N2
$1299 $799 7pc Insulated
Screwdriver Set
7 Piece Nutdriver Sets 22pc Screwdriver Set
IMP-18-ND7 (SAE) • (4) Slotted: 3/16” x 4”, 7/32” x 5”,
Assorted slot and Phillips screwdriver, 1/4” x 6”, 5/16” x 8”
+3/16”-1/2” Torx screwdrivers, scratch awl, screw
starter, stubby screwdrivers and tack • (3) Phillips: No.1 x 3/16” x 4”,
IMP-18-ND7M (MM) puller; all w/ neon handles • No.2 x1 /4” x 4”, No.3 x 5/16” x 6”

+5mm - 12mm IMP-18-SD22M KTP-30617MR
$2299
$1199 MSRP $58.71

$2999

38 Tool News | October-December 2021

HEX KEYS — Hand Tools
ALLEN WRENCHES

Bit Socket Sets 13pc SAE Hex Bit 13pc Metric Hex Bit
Socket Set Socket Set
• Anodized magnetic aluminum rail TIT-16123 TIT-16124
• S2 alloy steel bits for strength and
+ 1/4” Dr. - 5/64”, 3/32”, + 1/4” Dr. - 2, 2.5, 3, 4, 5,5.5mm
durability 7/64”, 1/8”, 9/64”,5/32” + 3/8” Dr. - 6, 7, 8, 9, 10mm
+ 3/8” Dr. - 3/16”, 7/32”, 1/4”, + 1/2” Dr. - 11 & 12mm
13pc Star Bit Socket Set 5/16”, 3/8”
TIT-16122 + 1/2” Dr. - 7/16” & 1/2” $4499

+ 1/4” Dr. - T10, T15,T20, T25, T27 $4499
+ 3/8” Dr. - T40, T45, T47, T50
+ 1/2” Dr. - T60 & T70

$4499

Comfort Grip T-Handle TIT-12769 (6pc Metric) Extra Long Arm
Hex Key Sets L-Key Sets
TIT-12768 (8pc SAE) • Set Includes: 2, 2.5, 3, 4, 5, & 6mm • Extra long design for more torque
• Ball tips on long arm
• Set Includes: 3/32”, 7/64”, 1/8”, $1499
9/64”, 5/32”, 3/16”, 7/32”, & 1/4”
• Textured finish for better grip
$1599 TIT-12713 (13pc SAE)

39pc Long Arm Allen + 0.05”,1/16”-3/8”
Wrench Set $2799
TIT-12714 TIT-12715
• Features a 3-way storage holder.
• (12) SAE - 1/16” to 3/8” (9pc Metric) (13pc Metric)
• (13) Metric- 1.27mm to 10mm + 1.5-10mm + T6-T50
• (14) Torx - T6 to T55 $2199 $2999

TIT-12739 25pc Hex Key Set
$2999
• SAE Sizes: 1/16”-3/8”
• METRIC Sizes: 1.27-10 mm
• Heat treated carbon steel

w/ black oxide finish.

TIT-12712
$999

L-Key Sets Metric 7pc TORX L-Key Sets Combo MM/SAE
EKL-10509 L-Key Sets
Packaged in Plastic Molded Holders Packaged in Plastic Molders Holder
Short Series Sizes: T10 to T40 Packaged in Plastic Molded Holders
SAE (9pc, 1.5-10mm)
EKL-10113 EKL-10907 EKL-10222
$999
Short Series EKL-10609 Long Series 22pc Long Series Set
(13pc, .050”-3/8”)
Long Series $1999 $2499
$999 (9pc, 1.5-10mm) EKL-13222
EKL-10213
$1299 22pc Ball End Series Set
Long Series EKL-13609
(13pc, .050”-3/8”) $1999
Ball End Series
$1299 (9pc, 1.5-10mm)
EKL-13213
$1799
Ball End Series
(13pc, .050”-3/8”)

$2499

ERGO Fold Allen Metric TORX Classic Fold Allen Metric
Wrenches EKL-25161 EKL-25581 Wrenches EKL-21151
SAE
Composite Grip Handles 6pc, 3mm to 10mm 8pc T8-T40 EKL-20511 (6pc, 3mm to 10mm)

SAE $1299 $1699 (5pc, 3/16” to 3/8”) $1099
EKL-25611 EKL-25171 EKL-21171
$999
6pc, 5/32” to 3/8” 7pc, 1.5mm to 6mm EKL-20812 (7pc, 1.5mm to 6mm)

$999 $799 (8pc Long, 3/32” to 1/4”) $599
EKL-25911 EKL-25181 EKL-21172
$999
9pc, 5/64” to 1/4” 9pc, 2mm-10mm EKL-20911 (7pc, 2mm to 8mm)

$999 $1199 (9pc Short, 5/64” to 1/4”) $799
EKL-25912 TORX
$999 EKL-22571
9pc, .05” to 3/16” EKL-20912
(7pc, T10-T40)
$799 (9pc, .05” to 3/16”)
$1499
$599

Tool News | October-December 2021 39

Hand Tools Individuals from Century 5pc Screw Extractor Sets 5pc Screw Extractor Set
Drill Bits
• 1-5 flute screw extractors • Set contains size 1-5 screw extractors
HSS, Titanium, Cobalt • Four double-edged cutting/gripping
Sizes Up to 1-1/2” CTR-73415 (Spiral)
CTR-73215 (Straight) edges for 8 points of contact
Tap and Dies - Your Choice • For both left and right hand threads
$1499
NC, NS, NF Style KNI-9R4719003
9pc Screw Extractor Set $5999
Wire Brushes
Designed to remove broken studs, bolts,
Radial and Cup Style sockets, screws and fittings
Radial Up to 4” Cup to 2-3/4” Left hand spiral design
Includes sizes: #1-#9
Grinding Wheels
TIT-16082
For metal cutting/grinding $6499
Up to 7” Diameter

Hole Saws

Bi-Metal Cobalt Shark Tooth
Hole Saws
Up to 6” Diameter

DRILL BITS 29pc Titanium Coated 115pc Master HSS Drill
Drill Bit Set Bit Set
29pc HSS Drill Bit Sets 5pc Stubby Drill Bit Set
• Include sizes 1/16” to 1/2” by 64th. Drill Bits A-Z, 1 to 60, & 1/16”-1/2”
• Include sizes 1/16” to 1/2” by 64th • Short length for confined areas • 3/8” Reduced Shank by 64ths
• 1/4” Hex Shank
3/8” Reduced Shank • Includes: 3/32”, 1/8”, TIT-16530 IMP-21-DS115
IMP-21-DS29 $3499 $9999
IMP-21-DS29R 3/16”, 1/4”,and 5/16”
$3399
CTR-17905
$2499

29pc Brite Drill Pod 29pc Cobalt Drill Pod 10pc Spiral Flute
Deisgned for general purpose Cobalt drills are designed to cut Extractor & Bit Set
applications in wood, plastic, and plastict.hrough extremely hard metals,
including stainless steel. Aerospace • 5 LEFT-HAND Cobalt Drill Bits,
CTR-22529 NAS 907-J specifications. 5/64” to 19/64”
$7999
CTR-26529 • 5 Fluted Screw Extractors,
$14999◉ sizes EX-1 thru EX-5

HAN-11119
$4999

Cobalt Drill Indexes 29pcs, Sizes 1/16” to 10pc Reverse Drill & 25pc Screw Extractor
1/2” by 64ths Screw Extractor Set & Drill Bit Set
Best for drilling Stainless Steel, Steel,
Mild Steel and Soft Metals CTR-26129 • (5) Reverse Drill Bits, • Extracts screws / bolts, & removes
15pcs, Sizes 1/16” to • 5/64, 7/64, 5/32, 1/4, & 19/64. broken fastener w/out breaking or
1/2” by 32nds MSRP $396.76 • (5) Screw Extractors, jamming.
• 1 - 5.
$22999 • Use on thread sizes 5mm to 16mm.
TIT-16013
$1599 AST-9447

MSRP $61.30

$4999

CTR-26315
MSRP $154.91
$8999

29pcs, Sizes 1/16” to 3pc Step Drill Set
1/2” by 64ths
1 - 13 Hole Sizes (1/8” to 1/2”)
CTR-26329 2 - 6 Hole Sizes (3/16” to 1/2”)
3 - 9 Hole Sizes (1/4” to 3/4”)
MSRP $282.22
TIT-16503
$15499 $2099

40 Tool News | October-December 2021

DRILL EQUIPMENT GM Manifold Drill Dodge Manifold Drill Hand Tools
Template Template
Ford Triton Manifold Drill
Template • Removes broken exhaust manifold bolts • Removes broken exhaust manifold
on GM LS III 4.8L, 5.3L & 6.0L motors bolts on Dodge 5.7L Hemi Motors
• Designed to remove broken exhaust without damaging cylinder head. without damaging cylinder head.
manifold studs on 4.6L, 5.4L and 6.8L V10
2 valve and 3 valve Ford Triton engines LIS-71400 LIS-71500
without damaging the cylinder head.
MSRP $164.95 MSRP $184.95
LIS-68500
$11999◉ $12999◉
MSRP $142.95

$9999◉

Manifold Drill Template For Ford Manifold Drill Template For 6pc Bolt & Stud Stud Remover &
4.6L, 5.4L & 6.8L Ford 6.0L & 6.4L DIESEL Extractor Set Installer
• Removes Broken Exhaust Manifold Bolts Removes stuck studs, rounded
• Removes Broken Exhaust Manifold Bolts on on Ford 6.0L and 6.4L Motors Without bolts and nuts from sizes 1/4” • Range: 1/4” to 3/4” / 6-19mm
Ford 4.6L, 5.4L and 6.8L V10 2 Valve and 3 Damaging the Cylinder Head. to 9/16” (6mm to 14mm). The • Fits hard-to-reach areas.
Valve Ford Triton Engines Without Damaging remover spline cuts into the bolt • Use w/ 1/2” drive tools.
the Cylinder Head. LIS-71350 head or threads for a sure grip
CTA-9011
LIS-71600 MSRP $184.95 LIS-19250
MSRP $32.95
MSRP $254.95 $12999◉ MSRP $48.95
$2999
$17999◉
$3999

5pc Left Hand Drill 10pc 1/8” Stubby 11pc 1/2” Dr. Flank Bite AST-7411 (SAE)
Bit Set Body Panel Double- Damaged Fastener Impact
End Drill Bits Socket Sets • 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
• Industrial, polished 11/16”, 3/4”, 13/16”, 7/8”
finish, 135° split point • 135° point for fast drilling • Flank Bite design works on up to
• High Speed Steel 90% rounded hex bolt head AST-7411M (MM)
• Premium, cobalt steel
TOO-15210 • Both sets include a punch bar • 8, 10, 11, 12, 13, 14, 15, 16, 17, 19mm
CTR-74105 $499 for removing jammed bolts from MSRP $93.38
sockets & 10 sockets
MSRP $79.15 $6999

$4499

3-Valve Insert Repair Kit Broken Spark Plug Thread Restoring Files Sav-A-Thread...
Remover Ford Triton
Repair damaged threads or blowouts 3-Valve Engines • Restores threads on bolts & shafts The only thread repair product that
in 30min or less per cylinder. Use • Files are cross-cut & depth can be used to repair both taper
w/ 5.4L & 6.8L engines built before Set Includes a Unique Porcelain seat and gasket type spark plug
10/9/07, and for 4.6L engines built Pusher Tool, that removes broken proportional to the thread pitch assemblies.
before 11/30/07. spark plugs from 2004 & newer • All are 7/16” square x 8-3/8” long
Triton 3 valve per cylinder engines HEC-5334-14
CAL-39300 CTA-8231 (Metric)
LIS-65600 (M14x1.25)
MSRP $418.34 $8999 • Sizes: 0.8 - 3mm
$4499
$21999◉ CTA-8233 (SAE)

• Sizes: 11-24 TPI

CTA-8235 (SAE) Your Choice
• Sizes: 9-32 TPI $1499

TAP & DIE SETS

AST-7580 (19pc SAE) CTR-98900 (40pc SAE) 41pc SAE: Sizes 4-40 to 1/2” 53pc Universal
Rethreading Kit
• Sizes 13-28 to 1/2” NF • Sizes 4-40 to 1/2” NF IMP-22-TD41H
• Includes (2) Thread Files, plus the following:
AST-7581 (19pc Metric) CTR-98912 (40pc Metric) 41pc Metric: Sizes 3mm to 12mm • TAPS & DIE SETS
• MM: 6-14
• Sizes 5 to 12mm • Sizes 3 to 12mm IMP-22-TD41HM1 • NC-USS: 1/4”-9/16”
Your Choice Your Choice $4999 • NF-SAE: 1/4”9/16”
Your Choice • DIES ONLY
$7999 $12999◉ • Metric: 6x1.25, 7x1, & 8x1
• NC-USS: 5/8”-11
• NF-SAE: 5/8”-18

CTA-8240
$169 99

41Tool News | October-December 2021

Hand Tools Radio Removal Tool Transmission Oil Cooler DISCONNECTS
2pc Set Disconnects for Ford
6pc Set 19pc Set
Specifically for Ford Radios Two Sizes, 3/8” and 1/2” • Easy to use in confined spaces • Combines both the above kits,
Use 3/8” size for 2003 and later Ford V8 Explorer, • Disconnects Spring Lock Couplings plus specialty disconnects.
OTC-7575 2004 and later Ford F150 and Cadillac CS. Use 1/2”
$999 size for Ford Super Duty trucks, F250, F350 and F450.

LIS-39220 • Sizes: 5/16”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8” LIS-39900
$2999 LIS-37000 $5499
$999

DEF Disconnect Set AC Disconnect Tool for Toyota 6pc Angled
• Also Connects Fuel Lines
Allows Easy Access to Hard-to-Reach DEF • Double Ended Disconnect Tool Works on • Sizes: 5/16”, 3/8”,
Fill and Breather Lines on 2012 and Newer Plastic Quick-Connect Fittings
Ford Power Stroke and Dodge Diesel. 1/2”,5/8”, 3/4” & 7/8”
Three sizes for many applications. LIS-39310
LIS-39400
LIS-37450 $1199 $1999
$1999

TERMINAL SERVICE Deutsch Terminal Tool 4pc Wire Terminal Tool Kit
Deutsch Master
• (3) Terminal Release Tools • Deutsch open and closed • Works on OEM Electrical • Work on conventional terminals, Pack-Con
• (1) Open Barrel Crimping Tool Connectors Used on variety of and Weather-Pack terminals (GM vehicles),
• (2) Closed Barrel Crimpers barrel terminals vehicles & equipment plus many Ford applications
MSRP $153.95 • Weather Pack terminals
TOO-18650 • Metri-Pack terminals • Kenworth & Peterbilt Trucks, Harleys LIS-57750
• Other open barrel terminals • Caterpillar and industrial connectors
$12499◉ MSRP $256.95 LIS-59600 $4999
$2999
TOO-18700
$21499◉ Ratcheting Terminal TIT-11477
Wire Crimpers
TOO-18900 (Heavy Duty) • Color coded wire sizes
red 22-18AWG-DIN 0.5-1.0mm
• Crimps 22 to 10 gage insulated blue 16-14AWG-DIN 1.5mm-2.5mm
wires yellow 12-10AWG-DIN 4-6mm

$2999 $2499

WIRE STRIPPERS TOO-19100 KNI-1262180SB

TIT-11469 TOO-19000 • 12-22 gauge wire • 10-24 gauge wire
• Self-Adjusts • Self-Adjusts
• 12-22 gauge wire • 12-22 gauge wire • Wire Cutter • Wire Cutter
• Self-Adjusts
$2499 $2499 $5999
$1799 TOO-18950

• 10-26 gauge wire
• Self-Adjusts

$2199

CIRCUIT TESTERS 12/24/48V Audible Kit w/8 Noid Lights & 2pc
Circuit Tester IAC Test Lights
AUDIBLE Tone is heard when Use to test spark plug circuits,
LED Circuit Tester 12/24/42v current is detected electronic fuel injection signals & idle
Circuit Tester LED illuminates when grounded air control circuits.
• Voltage measurement from 4-60 VDC Use on 12, 24 & 48V DC systems TOO-36350
• Applications: 6, 12, 24 & 48V DC systems • Computer Safe – draws 3 milliamps Measured Voltage: 0.3 - 60 VDC $7999
• Testing Current: <10mA •Display: LCD at 12V Testing Current: <10 mA
• Resolution: 0.1V CTA-2830
• LED Indication: Green (-) / Red (+) • Has 2-LED’s for easy voltage $4999
• Cable Length: 10ft identification: + BLUE for 12 & 24v /
• Operating Temperature: -10 – 50°C RED for 42v
• Operating Humidity: <80%
• Heavy duty ground clip w/ insulator.
AST-7767
$2999 TOO-28200
$1999◉

In-Line Spark Checker Kit “Check Point” Heavy Duty Heavy Duty Computer Safe
for Recessed Plugs Circuit Testers Circuit Tester
TOO-27000 TOO-27300
Troubleshoots virtually all domestic 6 &12 Volt systems $899 Safe for automotive computers
and import cars, SUV's & trucks • 12ft retractable wire & clip
TOO-21000 LIS-24550
TOO-23970 $699 $1199 $1499
$2499

Cordless Circuit Tester Digital Circuit Tester Heavy Duty Circuit Tester In-Line Spark Testers
TIT-11436 • Reinforced housing to last a lifetime! LIS-20610 TOO-23900
V-tip needle, doesn't require ground $1999 Tests up to 12v $1499 TOO-23920 (w/90° Boot)
wire or clip. Safe w/ ECMs, sensors, Your Choice
transducers, airbags, etc. LIS-28400 $999
$1499
AST-7760
$1499

42 Tool News | October-December 2021

Pilot Punch Kits All-Around Punch & Hose Pick Set (103/4”OAL) PUNCHES Hand Tools
Chisel Set CHISELS
6pc Set 14pc Set • Cotter Pin Puller PICKS
• Sizes: 1/8”, 5/32”, 3/16”, • 45° Hose
Punches: (2) Solid, (5) Pin, • 90° Hose 4pc DOMINTOR®
7/32”, 1/4”, & 5/16” (1) Line-Up, & (1) Center • Hose Puller Straight Scraper Set
Chisels: (5) Cold
MAY-62250 MSRP $114.56 MAY-13096 • 3/4” Wide Scraper
• 11/2” Wide Scraper
MSRP $69.16 MAY-61044 MSRP $80.62 • 1” Wide Scraper
$9499 • 1/2” Wide Scraper
$5499 24pc Set $6499
4pc Set (103/4”OAL) MAY-14082
9pc Set Punches: (6) Solid, (6) Pin, (1) Prick, &
• Sizes: 1/16”, 5/64”, 3/32”, 1/8”, (2) Center • Straight MSRP $116.53
Chisels: (6) Cold, (1ea) Cape, Half • Hook
5/32”, 3/16”, 7/32”, 1/4”, & 5/16” Round, Diamond Point • Dual Angle $8999
MSRP $203.55 • 90° Bend
MAY-62252 Heavy-Duty Seal Puller
MAY-61050 MAY-13094
MSRP $93.04 $13999◉ Remove the most stubborn seals w/
MSRP $78.44 this puller that is finished in black oxide
$7499
$5999 MAY-37019
12pc Set Long Set (133/4”OAL) $3499
• Sizes: 1/16”, 5/64”, 3/32”, 1/8”,
• Straight
5/32”, 3/16”, 7/32”, 1/4”, 5/16”, • 90° Bend
3/8”, 7/16”, & 1/2” • Compound Bend
• Hook
MAY-62254 • Offset
• Dual Angle
MSRP $141.82
MAY-13095
$11499
MSRP $125.64
5pc Long Pin Punch Kit
$9999
Sizes; 1/8”, 3/16”, 1/4”, 5/16”, & 3/8”
Dominator™ Pry Bars PRY BARS
MAY-62065
• Newly designed handle
MSRP $57.87 • Hardened, tempered steel shaft
runs from cutting edge through Colored 3pc Dominator Pry Bar Set
$4999 the handle Pry Bar Sets MAY-61355 - 3pc Set
• Capped end is in direct contact
6pc Cold Chisel Kit w/ the shaft, allows user to strike Includes 12”, 17”, and 25” sizes +7”C, 12”C, 18”C
w/ out damaging the handle
Sizes: 1/4”, 5/16’, 3/8”, 1/2”, 5/8” & 3/4” The ergonomic handle is forged through Total Value $96.29
the handle for ultimate, lasting toughness. $7499
MAY-60560 Made in the USA.
PART DESCRIPTION PRICE Heavy Duty
MSRP $57.18 $74.99 Green Indexing Pry Bar
MAY-14117 36” Long MAY-14071GN
$4499 The prying head is 13/16” wide and
$7999◉ can be extended from 34” to 53”.
Punch & Chisel Holder
Blue
• Works w/ punches or chisels up to MAY-14071BL Provides 1500 lbs to 2200 lbs of
1” diameter MAY-14118 42” Long $84.99 “persuasion” for many service and
MAY-14119 48” Long $124.99 $7999◉ maintenance needs.
• Great for use in tight spaces MAY-14120 58” Long $139.99
Orange OTC-7177
MAY-50301 4pc Pry Bar Set MAY-14071OR $16999◉

MSRP $38.73 $7999◉

$2999 Tough polypropylene handle grips
Forged carbon steel with black
Hook & Pick Sets oxide finish
Includes: 8, 12, 18, and 24 inch The Big Stick
• Shaft runs from tip through handle. TIT-17103 The Big Stick is now the biggest
• Capped-End, prevents damage $2999 Dominator pry bar at 54” in overall
length with a blade made out of 7/8”
to handle steel and an overall weight of 13lbs.
End Capped Pry Bars 45” Long Pry Bar
Mini Set (61/2” OAL) • Lifetime warranty LNG-853-45 MAY-14124
$15999◉
• Contains: Scratch Awl, plus 90°, •3 MpacdePirnythBe Ua.rSS.Ae. t 12”, 17”, 25” $6499
Complex, & Curved Hooks
LNG-853-3ST 4 Piece Pry Bar Set
MAY-60003
$1999 $5999 • PB4 - features screwdriver

4pc O-Ring 5pc Pry Bar Set 12”, 17”, 25”, 31”, 36” type handles and has
Remover Set LNG-853-5ST sizes 8”,12”,18” & 24”.
• PB40 - features heel-end
• For removal of o-rings and seals $11499 pry bay style and has sizes
• Rounded tips for easy, damage free 6”,12”,16” & 20”
Rolling Head Pry Bars Jimmy Bars
removal IMP-09-PB4
• (2) tip configurations w/ (2) blade $1599

lengths IMP-09-PB40
$1899
MAY-60028
$2499 PART DESCRIPTION PRICE PART DESCRIPTION PRICE
OTC-7162 6” long $29.99 OTC-7166 5/8” dia, 18” long $29.99
OTC-7163 12” Long $34.99 OTC-7167 3/4” dia, 24” long $34.99
OTC-7164 16” Long $37.99 OTC-7168 7/8” dia, 30” long $39.99
OTC-7165 18” Long $39.99 OTC-7420 7/8” dia, 46” long $99.99
OTC-7421A 1” dia, 54” long $119.99

43Tool News | October-December 2021

Hand Tools HAMMERS Dead Blow Hammers 3pc Dead Blow
IMP-04-DBH1 Hammer Set
Sledge Hammers 4lb Hammers (1lb) $1299 TIT-63133
Wood Handle IMP-05-CPH4 IMP-04-DBH2 $3999
IMP-05-SH4 (4lbs) (Cross Pein) (2lb) $1599 4pc Ball Pein
$1899 IMP-05-DH4 IMP-04-DBH3 Hammer Set
Fiberglass Handle (Drilling Hammer) (3lb) $1999
IMP-05-SH8F (8lbs) $1899 IMP-04-DBH4 • Drop Forged and Heat Treated.
$4999 16oz Ball Pein Hammer (4lb) $2799 • Durable Fiberglass Handles.
IMP-05-SH12F (12lbs) TIT-63160
$5999 $1499 IMP-04-BH4F-1
IMP-05-SH16F (16lbs) $3499
$7499

Brass Hammers High Quality Hammers 5pc General 8pc Hollow Gasket
w/Rubberized Grips Hammer Set Punch Set
Flame tempered hickory handles. TIT-63000
Non-marring, non-sparking • (1) 16 oz. Ball Pein Hammer • Punch round holes in paper, fiber, cloth,
solid cast heads. 3lb Sledge • (1) 32 oz. Ball Pein Hammer rubber, leather and other gasket materials.
• (1) 32 oz. Rubber Mallet
20oz ballpein $2499 • (1) 3 lb Cross Pein Hammer • Includes: seven hole punches (1/4” - 5/8”)
WLS-H20 • (1) 3 lb Sledge Hammer and the P69 drive mandrel.
$5999 TIT-63004
3.5lb single TIT-63125 • Made from alloy steel & heat-treated.
jack 3lb Cross-Pein
WLS-H56 MSRP $91.00 VIM-P79
$8499 $2499
$4999 MSRP $63.43
TIT-63216
$5499
2lb Brass Non-Sparking

$4499

TIT-63233

2.5lb Stone Hammer

$1999

BRASS PUNCHES 4pc Brass
Assortment Set
Brass Drift Punches 2pc Brass Punch Set
• Used for non-marring applications
Manufactured from machined round Two large brass non-sparking punches ideal • Designed to inhibit sparking
stocks. Non-slip knurled handles on for use near precision parts. • 1/4” - solid punch
some models. Chamfered ends - 8” punch (5/8” hex, tapered to 3/8”) • 1/4” & 3/8” - pin punches
- 10” straight punch (3/4” diameter) • 3/8” - drift punch
WLS-DP112 *chamfered ends
MAY-62277
1” x 12” drift, knurled OTC-4602
$3999 MSRP $51.11
$6499
WLS-32 9pc Brass $3999
Pilot-Punch Set
3/4” x 9” drift, knurled 32pc Transfer Punch Set
• Will not damage harder materials
$2999 • Non-Sparking, Non-Marring, & Non- • Sizes: 3/32” - 1” in 1/64” increments,
WLS-38 plus a 17/32” punch
Magnetic
3/4” x 11” drift, knurled • Includes Sizes: 1/16”, 5/64”, 3/32”, • Made from heat treated & tempered
tool steel
$2999 1/8”,5/32”, 3/16”, 7/32”, 1/4”, & 5/16”
WLS-52 • Knurled Grip Handle • Length: 4-7/8” (.00025 diameter)
• Comes in a durable pouch
5/8” x 9” drift, knurled MAY-61367
CEN-3S301B
$2499 MSRP $69.53 $6499
WLS-53
$5499
5/8” x 9” drift, tapered 1/4” Stamp Sets
IMP-10-LP14
$2499
WLS-58 27 piece letter

5/8” x 11” drift, knurled $2299
IMP-10-NP14
$1999
9 piece number

$999

44 Tool News | October-December 2021

GAUGES – CALIPERS Hand Tools

Dial Indicators Sets Indicator sets with on/off 0-1” Dial Indicator Self-Centering
magnetic base IMP-26-DI1 Cylinder Bore Gauge
All Sets Feature: Range 0-1” & CEN-3D104 (Analogue)
Graduations .001” • Graduations .001” • 1.4-6” Range
Graduations: .001” • .0005” graduations
CEN-3D101 Range: 0-1” $2299
MSRP $131.94 CEN-3D302
• Compact magnetic base Magnetic Base
MSRP $90.56 $11499 MSRP $180.00
• 77 lbs of Holding Power
$7999 CEN-3D105 (Digital) • On and Off switch $15999◉
CEN-3D102
Graduations: .001”/.01mm IMP-26-MB
• Compact magnetic Range: 0-1” $2299
base with flex arm MSRP $204.83

MSRP $163.10 $17999

$13999 CEN-3D107

CEN-3D103 • .001” graduations up to 1”
• On/Off magnetic base.
• Use locking pliers to clamp MSRP $94.36
to any convenient object
$7999
MSRP $123.06

$11499

Professional 0-6” Dial Calipers Electronic Digital Drum Gauge

Features (4) Measurements: Inside, Outside, Depth, & Step • Range: 6” - 20” (150-500mm) w/ .001” (.01mm) graduations
• Easy to Read, w/ Pointed anvils and 4-1/4” long arms
Dial
CEN-3B531
• 100° per Revolution w/.001” Graduations
MSRP $256.87
CEN-3C101
$6499 $17999◉
DIGITAL - Inch & Metric
Digital Depth Gauge
• Graduations of .0005” & .01mm
• Easy to read digital display
CEN-3C301 • 16” range with .0005” accuracy
$3999 • Interchangeable rods for depth needed
DIGITAL - Inch, Metric, & • Inch/Metric with the push of a button
Fractional
CEN-3M746
• Large LCD digital display. $5499
• Graduations of .0005”, .01mm, & 64th.
6pc Telescoping Gauge Set
CEN-3C350
$4999 • Both contacts release or lock by turning
knob at end of handle. Handles up to 5-1/2”.
Carbon Fiber
CEN-3C351 • Measurement is read w/ a micrometer.
$2199 • Self Centering gages
• Range 5/16” to 6”

CEN-3S116
$4499

FEELER GAUGES Angle Finder

26 Blade Offset Feeler Gauge 31-Blade Deluxe Used to measure truck and automotive
Feeler Gauge front ends and drive shaft angle.
• Contains: 26 Blades - 4” x 1/2” with thicknesses .005-.030
• Blades have 1” 45° offset for checking valve clearances • Ranges from .0015” to .035” CEN-6494A
• Equipped with knurled lock-nut, which releases the blades instantly for rapid • up to 4-1/2” O.D.
MSRP $17.98
selection of size desired and when tightened locks the individual blade into the LIS-68100
working position, retaining the blades not in use firmly in the handle $999 $1499
• The sizes, both decimal and metric equivalent, are permanently etched on each
blade.

LNG-3275A

$1499

25-Blade 12” Feeler Gauge 9pc Brake Lining Thickness
Gauges
• For Long Reach Applications
• Sizes Include: .0015, .002, .003, .004, .005, Allows Brake Pad Wear to be Accurately and
Consistently Measured without Guessing
.006, .007, .008, .009, .010, .011, .012, .013, • Color-coded gauges match SAE or Metric
.014, .015, .016, .017, .018, .019, .020, .021, .025,
.027, .030, and .040-inches rec.’s for brake pad replacement
• Check both straight on or a 90°
CTA-A311
$1999 angle to the rotor with offset tips

LIS-81850

MSRP $25.73

$1999

45Tool News | October-December 2021

Hand Tools TORQUE WRENCHES 3T Series Torque Wrenches

Push Through Ratchet Torque • Micrometer type scale for setting
Wrenches • Torque indicated by feel and sound
• Includes plastic case
• Selected reading is automatically locked in. • Graduations in 1 ft-lb
• Indicates desired torque by feel and sound.
• Accuracy +-4% right hand and +-6% left 1 Year
Warranty
hand direction from 20-100% of capacity.
• Rugged non-slip metal handles.
• Meets ANSI standard B107.14M

1 Year DESCRIPTION PRICE PART DESCRIPTION PRICE
Warranty 1/4” 20-200in lbs $169.99 CEN-3T317 3/8” Dr 20-200in lbs $59.99
PART 3/8” Dr. 10-100ft lbs Flex Head $149.99 CEN-3T415 1/2” Dr 10-150ft lbs $59.99
CEN-97361B 1/2” Dr 25-250ft lbs $169.99 CEN-3T425 1/2” Dr 25-250ft lbs $99.99
CEN-97352A 3/4” Dr 100-600ft lbs $634.99◉ CEN-3T660 3/4” Dr 100-600ft lbs $449.99
CEN-97353A 1/2” Dr 30-150ft lbs Flex Head $154.99
CEN-97355A By SK Hand Tool
CEN-97362
• Dual scale feature for easy change from SAE to Metric
1/2” Drive Digital Reversible • Positive lock with spring-loaded pull-down lock ring, making it
Torque Wrench
easy to set and retain settings better
• Range: 15-150 ft/lbs, 180-18000 in/lbs & 20.3-203Nm. • Comes in a durable storage case to protect your investment
• Double Gear Sensing System (Peak & Track Mode). • Individually serialized with matching certificate of calibration
• 8-bit electronics ensures accuracy of +/- 3.5%.
• Equiped w/ large backlit LED digital display & audible buzzer traceable to N.I.S.T.

BRO-BLD0212BM 1 Year
Warranty
MSRP $150.00
PART DESCRIPTION PRICE
$12499 SKT-77002 1/4” 20-150in lbs $299.99◉
SKT-77025 3/8” Dr 30-250in lbs $214.99◉
All Torque Wrenches Come SKT-77100 3/8” Dr 10-100ft lbs $219.99◉
in a Blow Molded Case SKT-77150 1/2” Dr 20-150ft lbs $244.99◉
SKT-77250 1/2” Dr 30-250ft lbs $259.99◉
**Except: IMP-11-TW38, IMP-11-TW12, SKT-77600 3/4” Dr 100-600ft lbs $999.99◉
CEN-6387, CEN-6380, TIT23140**

TORQUE TOOLS

1/4” Beam Type Torque Wrench “Click Stop” Torque Wrenches 4:1 Torque Multipliers

• 0 - 80 in-lbs; 0-9 N-m 3/8” dr 120-960in-lb 1/2” dr 10-150ft-lb Designed w/ (4) pinion gears in a compact
• Works with both left & right hand fasteners! housing. Frictional losses in the gear train may
IMP-11-TW38 IMP-11-TW12 cause a torque loss of 10% to 20%.
TIT-23140 $3999 $4599
$2999 CEN-6387 (3/4” to 1”)

Breaker Bar SKT-41654 • Output Capacity = 2,000 ft.lbs.
$9999 • Weight & OAL = 14lbs x 25”
• Drive: 1/2” MSRP $781.98
• Overall Length: 24”
$63999◉
IMC-41024
$3999 CEN-6380 (1/2” to 3/4”)

Torque Angle Gauges • Output Capacity = 1,000 ft.lbs.
Digital • Weight & OAL = 7lbs x 22”
MSRP $583.57
• Easily measure angular rotation for torque &
angle applications w/ an accuracy of +/- 2%. $48999◉

• Utilizing a V-channel and magnets, it quickly Analog
attaches to the handle of any standard
ratchet, wrench, or breaker bar. • Equipped w/ 1/2” Square Drive (Male & Female)
for both socket and ratchet
• Works on 1/4”, 3/8”, 1/2” & 3/4”.
• Built-in feature allows the user to keep track • 360° scale marked in 2° increments w/ intervals
of 10° & 30°
of angular rotation even when using a ratchet.
OTC-4554
BRO-BLDAG001 $1999

MSRP $122.70

$9999◉

46 Tool News | October-December 2021

Brake Caliper Press 3pc Thread Restorer File Set Hand Tools

• Will work with almost any wrench. An easy way to generate more torque. Ideal • Pitches include: SAE Rethread Files (Threads per inch): 9, 10,11,
for loosening stubborn nuts and bolts in hard to reach areas. Prevents you from 12, 13, 14, 16, 18, 20, 24, 27, 28 and 32; Metric Rethread File
damaging your wrenches by hammering them or latching them together to (Millimeters per thread): 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00
increase leverage. Round handle provides comfortable grip.
• Packed in a reusable pouch
LNG-279
LNG-2573
$5999
$2999
19pc Magnetic Socket Inserts (SAE, Metric)
GM 6.6L Duramax Diesel Fuel System Test Kit
• Includes nineteen pieces: SAE and Metric sets combined
• Magnetic insert firmly holds the fastener in the socket for easy • For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines.
• Gauge assembly with 6-ft. hose and quick coupler.
installation/removal. • 3-1/2” gauge reads 30 inHg to 15 PSI.
• Prevents fasteners from dropping into restricted areas where they
LNG-TU-32-6
can be difficult to locate and/or retrieve
• Magnetic insert can be left in or removed for use in other sockets $17999◉

LNG-522

$2499

Small Engine Compression Tester 6” Diameter Tail Pipe Cutter

• Will test all small engines with M14 or M18 threads. • Working range to cut tailpipes from 3-1/2” to 6” diameter.
• Valve core at bottom ensures accurate readings. • 12 cutting wheels allow superior tracking.
• The 1-1/2” gauge has a dual scale dial with ranges from 0-200 PSI and 0-14 bar. • Cutting wheels do the work.

LNG-TU-21C LNG-210

$2999 $6999

Foam Kneeling Pad 10” x 19” 3pc Hose Pinch Pliers Set

• Closed cell foam laminated with orange in the middle of two black layers. • Pliers come in small, medium and large
• Size: 10” x 19”. size for all your hose pinch off needs
• Will not breakdown under harsh chemicals, including the harsh oils used
• Designed with self-locking feature
in the automotive/aircraft industry. • Used to seal vacuum, fuel line and radiator
• Aid for comfort and cleanliness when kneeling, sitting or lying on hard
hoses, plus other flexible materials
surfaces such as garage or home floors, gardens, patios, driveways, etc. • Patent pending offset design allows more
• Fine cell structure resists grease, oil and dirt.
• Easily cleaned with water. access in hard to reach areas
• Lightweight - easy to transport, store or hang up.
LNG-1500
LNG-1169-O
$7499
$1699
Curved Hose Clamp Pliers
Fuel Injection Tester - U.S. And Imports
• Cross-cut tip design grips most hose clamps from multiple angles.
• This basic fuel injection tester includes large and small Schrader adapters, • Ratcheting lock mechanism holds the clamp in an open position for hands-free
M6-1.00 O-ring adapter, and tee manifold.
use. Dual material grips for comfort. Works on most spring hose clamps.
• The 2-1/2” gauge has a dual scale dial with ranges from 0-100 PSI and 0-7 bar.
LIS-17460 Curved
LNG-TU-113PB LIS-17480 Straight

$5999 $4999

2 pc. Slack Adjusting Tool and Wrench 15” Wrench Extender

• Speed up installation and service on Meritor brake • An easy way to generate more torque with almost any wrench.
slack adjusters • Ideal for loosening stubborn nuts and bolts in hard to reach areas.
• Prevents you from damaging your wrenches by hammering them
• 5/16-inch double square ratchet has an angled
head to give additional clearance for hands or latching them together to increase leverage.

• Fork-end release tool holds tensioner release VIM-WE15
button securely without prying or damage
$4999
TIT-85512
$2999

TubiX® Pipe Cutter

• QuickLock single-handed quick adjustment:
independent holding and clamping on the tube

• Easy one-handed pushing for quick adjustment to
different tube sizes

• Comfortable: easy cutting due to high-quality
needle bearings in the cutting wheel and guide rolls

• Cuts pipes from 1/4” - 1-3/8” with wall thickness
up to 2 mm

KNI-903102SBA

$8999

47Tool News | October-December 2021

Hand Tools Double Ended Clip Heater Hose Plastic Fastener Wrinkle Band Ring Line Sockets,
Lifter Disconnect for GM Remover Compressor 19MM & 22MM
LIS-35460 LIS-39190 LIS-12320
• Removes plastic plugs and • Range of 3” to 5”
Thin tips provide easy access Designed to separate quick- fasteners from undercarriage Designed to Replace Fuel
when removing plastic clips. connect fittings on 3/4” heater and upholstery LIS-21700 Line Fittings on Cummins
line on GM vehicles $1799 ISB and ISX engines.
$999 LIS-35400
$1299 $999 $4999

Seal Puller 3/8” Hand Impact Timing Tool for GM, 4pc
Tool Set
• For oil and grease seals • For Use When Servicing the Timing Chain on GM
• 12-1/2” long • Loosens rusted, frozen 2.8, 2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L Engines.
nuts, bolts and screws.
LIS-56750 • Helps Ensure Camshaft Alignment During Timing
$999 • Delivers 200 ft-lbs. of Chain Removal and Installation.
“shock torque”
LIS-37530
LIS-29200
$3999 $3999

Mechanic's Stethoscope Compact Wire Clutch Pilot Bushing Telescoping Mirror
Strippers Remover
• Quickly pinpoints the source of • Telescopes from 10” - 14”
noises in the engines, transmissions, • Multi-Function Pliers will Cut, Strip, & • Uses hydraulic pressure to remove
differentials and bearings of any Crimp Insulated & Non-Insulated Wires. brass and bronze brushings from LIS-32050
vehicle 1/2” to 3/4” ID $999
• Wire Gauge is Marked on Tool
LIS-52500 • Self-Tapping Tip w/ 2-3 threads
$1999 LIS-68250 (14-24 Gauge)
LIS-68280 (8-14 Gauge) LIS-55600
$2999 $1399

IPR Socket for Ford Diesel Timing Tool for Ford 3.5L & 3.7L Valve Spring Compressor Universal Bearing
with Tensioner Hold Down for GM LS Packer
• Remove & replace the injector pressure LIS-37200
regulator (IPR) on Ford 6.0L, International, $5499 Allows removal of the valve spring • Place bearing between plastic
and other diesel engines. without removing the rocker stand cones, tighten, and apply grease
or other rockers. through fitting on threaded end.
• 3/8” square drive
LIS-16560 • Works on bearings
LIS-68210 $1999 up to 4-1/2” O.D.
$2999
LIS-65250
$999

Audi/VW Oil Drain Clip Removal Pliers 2 Piece Oxygen 3/8” Dr. Extra
Plug Tool Sensor Set Deep Sockets
Simply squeeze handles
• Removes new, plastic oil to pop out clips • Includes (2) 7/8” Oxygen • Includes 10mm, 12mm sockets
drain plugs without damage Sensor Sockets • Also services:
CTA-5310 • Diesel glow plugs
CTA-1037 $1999 • 3-1/4” Length • Benz C-Class (W240) rear
$999 • 3-7/8” Length
• 1/2” Drive bumper covers
• Comes in pouch for storage
CTA-1030
SKT-84700 $2499

$8999

Universal Camshaft Pulley & Pin Spanner Set
Crankshaft Pulley Holder
• Includes (4) pairs of
• Holds camshaft or diesel pump interchangeable 2-sided pins,
sprockets and gears for removal and providing (8) different sizes.
tightening of retaining bolts
CTA-8120
• Includes 7 sets of interchangeable pins
– 3.5, 4, 4.5, 5, 6, 7 and 10mm MSRP $125.00

CTA-2855 $9999

MSRP $99.95

$8999

Bulb Pliers Safety Hammer CV Joint Puller Goliath Ball Joint XL
C-Frame Press
• For all types of bulbs • This Tool will Breaks Glass & Cuts • Pulls CV Joints w/ hidden
• Angled to fit the tightest of clearances Seatbelts, in order to get you out in an retaining rings w/out damaging • Features 3X the throat space and includes
• Can withstand heat up to 100° C (212° F) emergency the roller bearing inside the joint a notched foot that allows for pressing out
ball joints without removal of top mount
CTA-1012 • Lightweight handle w/double-headed • Use w/ an Axle Puller (5/8”-18) grease fittings.
$1199 hammer and recessed razor
CTA-4245 • Includes both long and short drive screws.
CTA-10600 $2199 • 9.1” throat, 11.9” length
$999
AST-78100
$9999

48 Tool News | October-December 2021

Filter Wrenches and Tools Cap-Type for Toyota, Hand Tools
Lexus, & Scion
11pc Fuel and Oil 21pc HD End Cap Wrench Set
Filter Cap Wrench Kit • Size: 64mm (14 flutes)
CTA-096950 (11pc) • Hardened Steel Plates are Wire and • Fits all 4-types of plastic &
$4999 Spot Welded for Strength.
aluminum caps
• A collection of 21 end cap filter
wrenches for use on the most popular CTA-2465
domestic and import vehicles, including $2499
four new sizes.
64mmx14 Flute Oil
L$1IS4-96919◉460 Filter Wrench

Swivel Grippers for Trucks 3/8” Drive Oil Filter 5pc Oil & Fuel Filter • Works on all 4,6,8 cylinder
LIS-57050 Wrench Socket Set Toyotas, Lexus, Scion Models
45/16”-43/4”
STANDARD CAP-TYPE • Low profile design to fit tight areas • Use with 1/2” Dr Tools
LIS-57060 • Precision-stamped to remove • Includes; 3/8” drive 6 point 24mm,
43/4”-5” CTA-1726
Aftermarket & OE spin-on 27mm, 29mm, 32mm & 35/36mm $3499
LIS-57070 filters and filter housings sockets Universal Fuel Tank Lock
51/4”-53/4” Wrench
Your Choice CTA-A268 LIS-13300
$1999 $4499 Needed to remove fuel tank locking rings on
• Size: 74.5mm (14 flutes) fuel senders for many 2004 and newer
vehicles
$599
AST-78935
$3499

Adjustable Angle Jointed Jaw Filter Pliers Adjustable Oil Filter Pliers Set
Oil Filter Pliers
• Jointed jaws rotate 180 degrees providing access • Includes small pliers: 13-1/2” long and fits filters
• Slip-joint handle offers a wide size range for where standard pliers do not. ranging from 2-1/4” to 5” (57 mm to 127 mm) in
use on 2-1/4” to 4-3/4” oil and fuel filters diameter.
• Jaw teeth and cushioned handles provide
• Indents every 30° for 180° of total adjustment maximum gripping power for slip free operation. • AND Large pliers: 18” long and fit filters ranging
from 3-3/4” to 7” (95 mm to 178 mm) in diameter.
AST-78515 • Range from 2-1/4” to 4 -3/4”
$1699 OTC-4562
OTC-4582 $5999
$8499

• Range from 3-1/8” to 7-1/2”

OTC-4584
$8999

Import Car Filter Wrench Bi-Directional 73-153mm 3 Jaw Spider Type Filter
• Fits Filters from 2 1/2” to 3 1/8”. Spider-Type Wrench w/ Adapter Wrench
• Removes all oil filters from 2 1/2” to 3 1/8” in diameter.
• For removal & installation of filters • Heat-Treated Arms with Specially • 61-124mm Capacity
This extra large range enables the 63600 wrench to fit • Low profile works in tight areas. Designed Gripping Jaws Grab • Use with either 3/8” or 1/2” tools
most all import car filters plus the common 3” domestic • Angled legs to bite into filters. Even the Most Stubborn Filters.
car filters. • Range: 50-95mm LIS-63830
• Removable adapter provides $2999
LIS-63600 CTA-2507
$1199 $1499 LlIoSw-e6r c3le8a9ra0nce in tight spots.
$3499

Compact Wrench for Paccar Compact Wrenches for Davco Ford 6.0L & 7.3L Fuel Filter Wrench

• Compact design and 3/8” square drive for easier • Compact design and 3/8” square drive for easier access to • Low profile design for easy access in tight areas.
access to Paccar chassis mounted fuel filter • Davco chassis mounted fuel filter assemblies. • Reversible Six lug design provides the
assemblies. Works on fuel filters found on Kenworth,
Peterbilt and Cummins diesels. LIS-61170 5” $2299 convenience of two sizes in one tool.
LIS-61180 6” $2499 • 3/8” drive
LIS-61380 LIS-61190 8” $2999
$2199 OTC-6760
$2499

Vent Cap Wrench for Davco Cummins Oil Filter Large Range Belt Filter Wrench
Plug
• Double Ended Wrench Removes • For Filters Up to 6” (152.4mm).
Vent Cap on Top of Davco Chassis • For 2500/3500 2013-2017 • Adjusts quickly to fit any spin-on oil filter up
Mounted Fuel Filter System Canisters. Cummins Heavy-Duty
Trucks to 6” diameter. Use with 1/2” drive or 3/4”
LIS-61070 wrench. Strong nylon belt.
$1399 LIS-57180
3pc Plastic Oil Drain Plug Set $1199 LIS-63500
$1199
Safely and Easily Remove Plastic Oil Pan Drain
Plugs Found on Many Late Model Audi, BMW, Ford 49Tool News | October-December 2021
and Volkswagen without Damage to the Plug.

LIS-51150
$3499

Hand Tools Battery Carrier Caulking Guns Tubing Benders
IMP-45-CGK (Skeleton)
• Use to lift and install most top post and side IMP-45-CGR (Ratchet) Enough leverage to bend
terminal batteries. Designed to transfer lifting Your Choice 3/16”, 1/4”, or 5/16” steel tubing
force to a secure hold on the battery; teeth $599
on jaws offer a secure grip. Vinyl strap resists IMC-806 (3/16”)
battery acid and will not conduct electricity. IMC-808 (1/4”)
IMC-809 (5/16”)
OTC-4620
$1499 Your Choice

9pc Flexible Driver & Bit Set Reversible Impact Driver Set $3999
IMP-45-TB3H
• CrV blade w/ magnetic tip. • Use to loosen and tighten screws, nuts and bolts,
• Ergonomic cushioned handle. w/ special handle to reduce risk of injury when Bends 1/4”,5/16” and 3/8”
• Set includes:(1) Spring tube (215 mm) striking driver w/ hammer
(4) Slotted: 4mm, 5mm, 6mm $1899
(3) Phillips: PH1, PH2, PH3 • Has 8 standard & long length interchangeable bits Tube Bending Pliers
(2) Star: T15, T20
TOO-14950 • Bends tubing from the side allowing
TIT-12227 $2999 for use in limited access areas.
$999
Shaft in Seal Puller 3/8” Drive Impact Driver Set • 3/16” and 1/4” dia. tubing.
IMP-18-ISD38
Removes cam shaft and crank seals without $1199 OTC-4401
damage to the shaft $5999
High Capacity Tubing Bending Pliers
LIS-58430 Hydraulic Crimper
$1999 Bends copper, brass and other
Battery Nut Pliers Crimping range: Cu: 10-120 soft thin wall tubing
mm² (AWG #6-4/0) For use with 3/16, 1/4, 5/16, and 3/8
Used to Loosen or Tighten Battery Terminal Al: 25-95 mm² (AWG #4-3/0) inch outside diameter tubing
Clamp Nuts Crimper capacity: 8 ton
Offset handle design for working in tight TIT-11488
spaces. Serrated jaws for grip. Dual material TIT-11981 $1499
grips for comfort. $9999
Hydraulic Cable Exo Burr™ External Deburrer
LIS-55240 Crimper
$1599 Quickly repairs damaged threads on steel bolts
Rotary Spot Weld Cutter Crimping range: Cu: 4-70 including stainless steel and hardened steel, threaded
mm² (AWG 11-2/0) rod, copper, brass, aluminum, plastics, and wood.
• Remove spot welds from sheet CAlr:i8m-5p0emr cma²p(aAcWitGy:85-1/t0o)n Works with most power drills on materials ranging
metal w/ Double sided 3/8” & 1/4” from 5/16 to 7/8 inches (8-22 mm)
blade w/ retractable point TIT-11980 Made from hardened steel
$8999
• Arbor fits all 1/4” Drills TIT-51950
• Replacement 3pc Double Sided Terminal Crimper $5999
w/Rotating Die Set
Cutting Blades TOO18025 Stud Extractor
• Crimps popular 8 - 4/0 AWG copper electrical
TOO-18000 and battery terminals using stranded wire Will effectively work on threaded, broken, rusted,
$1999 and smooth studs. Adjustable to fit studs 1/4” to 1/2”.
• Dies make hexagonal crimps Works w/ your 3/8” impact wrench.
Ford Glow Plug • Long handles for increased leverage (26” OAL)
Harness Puller TIT-16023
TOO-18840 $2499
• Helps prevent damage to the harness and $14999◉
connector rail. Drum Plug Wrench
Bolt Cutters IMP-22-BC18
• Features a thumb tab and a textured highly IMP-22-BC14 18” Handle Fits most steel and plastic caps,
visible grip that provides a better grip on 14” Handle $2299 including 3/4-inch vent plugs
the tool when removing the harness. $1699 IMP-22-BC36
IMP-22-BC24 36” Handle LNC-5841
LIS-37370 24” Handle $4999 $1599
$1099 $2799
IMP-22-BC42 32oz Non-Aerosol Spot Sprayer
S-Cam Air Brake 42” Handle
Spring Tool $8999 • 80-150 psi operating pressure (200psi MAX)
• Eliminates dangerous, harmful propellants.
• Safely replace brake shoes on • Refillable & No more aerosol disposal issues.
heavy-duty tractors and trailers. • Not for use with paint products.
• *Repair Kit Available Separately TIT19420
• Simply hook the retaining spring loop
and press down against the axle TIT-19419
$4999
OTC-5081 TIT-19421
$9499
2pc Blue & Red

$9499

50 Tool News | October-December 2021