Tool News, Quarter 3 2021

The Authority on Tools Since 1965

July-September 2021

Now Carrying Pocketmate Rechargeable Light

pg 15,53 • 325 lumens (high)
Heavy Duty Digital Pressure • High and low modes
Gauge and Inflator • USB rechargeable
• Attaches to key chains, zippers, brim of hat for
• Resolution: 0.1 PSI
• Units of measure: PSI (0-255), kPa (0-1800), kg/ hands-free use

cm2 (0-18), and Bar (0-18) STR-73300 Silver
• Backlit, auto-on when the pressure sensed, STR-73301 Red
STR-73302 Blue
auto off after 15 seconds STR-73303 Pink

MLT-S-568 $2999

$6999◉ Magnetic Expandable Quad Tray

LP Ratchets with FREE • 4 separate compartments for easy organization
SKT-80200 3/8” 8 Inch • Includes 1 Quad Tray
Pair of Impact
$9999 Gloves EZR-EZTRAY-QGR
Large SKA100013 EZR-EZTRAY-QOR
SKT-80290 3/8” Flex 11 Inch or EZR-EZTRAY-QRD
X-Large SKA10014 $2999
$9999 R134a Manifold Gauge Set with
Case
TOOL NEWS Exclusive
Promotion • Aluminum Block Design with Sight Glass
• Professional Quality
Available While Supplies Last • Anti-Flutter Design
• Additional Access Port
Buy ANY Below M12 Bare Tool • 60” Hoses
2557-20 3/8” Ratchet 2551-20 1/4” Surge Driver
2558-20 1/2” Ratchet FJC-6760SPC60
2559-20 1/4” Extended Ratchet 2552-20 1/4” Stubby Impact Wrench
2553-20 1/4” Stubby Driver $7499
2560-20 3/8” Extended Ratchet 2554-20 3/8” Stubby Impact Wrench
2566-20 1/4” High Speed Ratchet COOL DOWN
2567-20 3/8” High Speed Ratchet 2555-20 1/2” Stubby Impact Wrench WITH
2503-20 1/2” Drill
and get 2520-20 Recip Saw ON PAGE 27

FREE
M12 4.0Ah Battery
Starter Kit
MIL-48-59-2440BX

New Items Special Promotions

Ratcheting Harmonic Balancer Puller AC Disconnect Tool for Toyota

• Remove harmonic balancers without the hassle of • Double Ended Disconnect Tool Works on Plastic Quick-Connect Fittings on the High-
trying to start bolts or the frustration of positioning and Low-Pressure Air Conditioning Lines on Most 1998 and Newer Toyota Vehicles.
multi-jointed puller legs.
LIS-39310
• Three ratcheting legs with puller feet eliminate the need
for bolts $1199

• Legs quickly adjust and hold their position Engine Barring Tool for Paccar

CAL-38000 • Allows the Engine Crank to Be Manually Adjusted.
• Works on Paccar MX-13 engines, found on
$7999
Kenworth and Peterbilt trucks. Can be used to make
Soot Sensor Thread Chaser M22 X 1.5 sure the engine rotates freely while troubleshooting
other issues. Use with 1/2” square drive.
• Cleans Threads in Soot Sensor Holes.
• Use with 7/8” hex socket or 3/8” square drive. LIS-61840

Important: Use anti-seize. $4999

LIS-12180 5/8” Carbide Scraper

$999 • Designed to Remove Gasket Residue from Steel and Aluminum Heads and
Manifolds, Along with Carbon Build-Up and Even Rust. .
Camshaft Lock Tool for Honda
LIS-81960
• Accurately Lines Up and Holds Cams for Proper
Timing Chain Alignment on Honda® K-Series Engines. $2499

LIS-37950 45° Disconnect Pliers

$1499 • The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP
Line Fittings and DEF Fittings in Hard-to-Reach Areas.
55 Gallon Drum Funnel Kit
LIS-37140
• 15” Wide Funnel Fits into the Aluminum Adapter Which Fits Any 2” NPT Bung.
• Kit comes with a splatter pad that has a porous material that allows fluid $2499

to quickly pass through into the drum. The pad material resists engine oil,
transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other
solvents.

LIS-17132

$6999

G23 Dual Lighting System Inspection Low Profle Screwdrivers
Beam Penlight
• Mayhew’s flat, low profile screwdrivers feature
• With flashlight, WHITE COB, and RED COB Light modes an innovative design for hard-to-reach areas.
• BATTERY TYPE: 2 x AAA (Included) or Rechargeable
• Ideal for automotive assembly, small engine
(Not Included) repairs, dash and door actuator work, and more.
• BEAM DISTANCE: 55 ft / 17 m
• LENGTH: 5.7 in / 14.4 cm MAY-16990 1/4” Slotted
• LIGHT OUTPUT (C.O.B.): 120 Lumens MAY-16991 #1 Phillips
• RUNTIME (C.O.B.): 3 h 15 min MAY-16992 #2 Phillips
• RUNTIME (FLASHLIGHT): 11 h
$1499
CST-30413
SHOCKWAVE™ Impact Sets
$2499
• The Wear Guard Tip™ delivers increased wear
Polysteel 400 Swivel Flashlight resistance which protects the fit over the life of the bit.

• With twist focus and magnetic base • The Shockzone™ is optimized for each tip type and
• BATTERY TYPE: 4 x AAA (Included) length of driver bit to absorb peak torque and prevent
• BEAM DISTANCE (HIGH): 688 ft (MEDIUM): 459 ft (LOW): 246 ft breaking
• LIGHT OUTPUT (HIGH): 440 Lumens (MEDIUM): 200 Lumens
22pc Impact Driver Bit Set
(LOW): 60 Lumens MIL-48-32-4016
• RUNTIME: (HIGH) 3 h (LOW) 29 h (MEDIUM) 7 h
$3999
CST-30138
56pc Impact Drill/Driver Bit Set
$2999 MIL-48-32-4017

DX126 Double Lock Pro Razor Knife $9499

• One blade, twice the safety with both a lock switch Lighted Pickup Tool and Inspection
and liner lock Mirrors

• EZ Replace Blade Illuminate hard to reach areas with these convenient lights
• Only 3.1 Inches Closed Tools telescope out as much as 30”

CST-30369 CAL-32 Round Mirror

$1199 $1499

CAL-33 Pickup Tool

$999

CAL-35 Rectangular Mirror

$999

New Items Special Promotions

Spark Plug Tube Seal Installer Flexzilla Extension Cord Reels

• Used to Replace Seals in Valve Covers on • Lighted triple tap outlet for plenty of capacity
Honda® 2.4 and 3.5L Engines. • Circuit breaker with reset button prevents breaker from

LIS-64600 tripping and blown fuses
• Oil-Resistant AWG SJTOW cord flexible in low temperatures
$3499
and resists the effects of oil, water and sunlight
Line Sockets, 17MM & 21MM • Swivel mounting bracket pivots in the direction of your work
• Cord locks out in 1 ft. increments
• Designed to Replace Fuel Line Fittings • Power indicator light
Without Damage to Fitting, Fuel Rail, and Fuel • Grounded plug includes 5 ft. lead-in cord
Line Reducing the Possibility of Fuel Leaks. • cULus Listed

LIS-12490 LEG-FZ8140503 50ft 14/3 AWG

$4999 $14999

Caster Camber Kit For GM, 21MM & 24MM LEG-FZ8160253 25ft 16/3 AWG

• The 14-1/2” 21mm/24mm Wrench can be Used to Move Hard- $9499
to-Reach and Often Rusty OEM Cams on 1999 and Newer GM
1/2 and 3/4 Ton Vehicles with Coil Spring Front Suspensions.

LIS-41630

$4499

Rearview Mirror Removal Tool Pigtail Rubber Gasket Tool
For Ford
• Rounded and Polished Steel Tip Slides
• Simply Slide the 2-Prong Tool into the the Self-Locking Part of the Rubber
Bracket with Gentle Upward Pressure While Gasket Into the Locking Channel.
Moving the Tool Side-To-Side, the Mirror will
Disconnect. LIS-81140

LIS-83050 $1299

$1499 Genius PRO 6/12/24 Volt Smart Battery Charger

• Fully-automatic professional smart charger, maintainer, power supply,
and battery-desulfator with temperature compensation rated at 25-
8” x 11” Flexible Magnetic Pad amps for all types of automotive, marine, and deep-cycle batteries.
• A multi-voltage charger - 6-volt, 12-volt, and 24-volt - for lead-acid
• Flexible Magnetic Pad 8”x11”. automotive, marine, and deep-cycle batteries, including flooded, gel,
• Ideal for holding parts and tools conveniently AGM, and maintenance-free, plus lithium-ion.
• A dual-voltage power supply to maintain constant power delivery without
at your reach. unwanted ripple, noise, and transient spikes during ECU flashing,
• Sticks to most parts of a vehicles metal body reprogramming, and diagnostic testing.
25 AMP 50 AMP
and is harmless to finished surfaces. NOC-GENIUSPRO25 NOC-GENIUSPRO50
Corrosion Preventative $54999◉ $86999◉
VIM-MAGPADLG
• Stops battery corrosion for the life of
$6499 your battery.

Battery Cleaner • Oil-based formula that does not dry or
evaporate.
• Instantly neutralizes, dissolves and
removes battery corrosion. • Environmentally safe and resistant to
reversion, moisture, shock and vibration.
• Changes color upon contact with acid.
• Ideal for battery terminals, cables, • The original formula since 1914, and
Made in the USA.
hold-downs and boxes.
• Restores maximum current flow and NOC-A202

reduces potential voltage leakage. $1299
• Packaged in a 14-ounce aerosol can.

NOC-E404

$799

Mid Torque Impact Wrenches High Torque 1/2” 1/2” Ext Anvil Impact WITH ANY BARE TOOL
Impact Wrench Wrench with One-Key
3/8” Drive Bare Tool FREE
600 ft/lbs • 1,400 ft-lbs • 1,100 ft-lbs
High Capacity
MIL-2960-20 M$3IL1-929796◉7-20 M$3IL9-929796◉9-20 5.0Ah Battery
$24999◉ MIL-48-11-1850X

1/2” Drive Bare Tool
650 ft/lbs

MIL-2962-20
$24999◉

M18™ Sawzall® M18™ Angle Grinder WITH EITHER KIT

• Free Speed: 3,000 spm • Free Speed: 8,500 rpm FREE
• Variable Speed Trigger • Tool Free Adjustment
• 1-1/4” Stroke Length • Kit Includes: Charger, Bag, 2 High Capacity
• Kit Includes: Charger, 6.0Ah Battery
Batteries MIL-48-11-1865X
Case, 2 Batteries
MIL-2880-22 Paddle Switch
MIL-2821-22 $54999◉
$57499◉ MIL-2881-22 Slide Switch
Bare Tool $58999◉
MIL-2821-20
$24999◉ Bare Tools
MIL-2880-20 MIL-2881-20
$21499◉ $22999◉

New Items Special Promotions

20V 1” Cordless D Handle Impact Wrench NEW 1/4” Die Grinders from

World’s Most Powerful 1” Cordless Impact Wrench with best in class Burrs easily changeable allowing the operator to use
power-to-weight ratio only one wrench thanks to the new spindle lock system.
• 3,000 ft-lbs of nut busting torque, 2,200 ft-lbs of tightening torque • Good surface grip avoiding the tool to slip once in
• IP56 rated for tough environmental conditions operator’s hand thanks to the handle’s material (TPR) and Replacing
• PRODUCTIVITY: 250 bolts per charge – tackle a full day’s worth of work ergonomics. 91XX Die
• Reduce set up time of jobs up to 15% over tethered applications • High application coverage thanks to the multitude of heads
• No waiting on air for roadside applications (short & long straight, 120°, 90°) Grinders!

ING-W9691-K4E • Less heat transfer between the motor and the sleeve thanks

$1,79999◉

to the composite housing .56 HP
.34 HP .34 HP 60°
CPT-7405 CPT-7408 CPT-7411
$11999 $15999 $17499
M18 Chainsaw/Blower Combo Kit
Blower
Chainsaw • Max 450 CFM
• 20,000 rpm
• Purposely built for the M18 FUEL™ 16” Chainsaw to • Power to Clear From 15’
provide the power and performance of a gas engine • Reaches full power in
up to 40CC. under 1 second .34 HP 90° .34 HP Long .56 HP Long
CPT-7406 CPT-7410 CPT-7412
Includes 12 Ah Battery and Charger
MIL-2727-21HDP $13499 $13499 $29999
$61999◉

M18 1/2” and 3/8” 1/2” Nano Flex-Head Angle Impact Wrench
Impact Wrench Kit
• Includes: • An industry first true flex-head impact wrench with shortest length
• 2767-20 1/2” Impact Wrench yet at 3.34”
1,400 ft/lbs of Nut-Busting Torque
• 2960-20 3/8” Impact Wrench 600 • Patented design features innovative dual air intake motor and twin
ft/lbs of Nut-Busting Torque hammer mechanism for increased power, and adjustable tension
• Charger 180° flex-head with 360° swivel handle for maximum access
• (2) 5.0Ah Batteries
• Tool Bag • Front head exit exhaust, 400ft.lbs MAX torque, 280ft.lbs working
MIL-2988-22 FREE torque
$75999◉ High Capacity
8.0Ah Battery AST-1834
FREE MIL-48-11-1880X
1/2” Drill/Driver $16999◉
MIL-2803-20X FREE
“Thor” 1/2” Impact Wrench
4.5”/5” Grinder
MIL-2880-20X Designed to be the highest performing 1/2” impact
wrench on the market
• Patented oversized floating air motor and twin-hammer

assembly put the weight over your hand for balance and
allow for industry leading power at only 6.7” in length
• Rated 940 ft-lbs traditional Max Torque (compare to
1,600 ft-lbs nut-busting or bolt-breakaway)

AST-1894

$19999◉

M12 FUEL™ Stubby M12 FUEL™ 3” Compact Cut Off Tool BUY ANY OF THESE
Impact Wrench Kits KITS AND GET A
• 20,000 rpm
• Features: 3 RPM Settings ,4th mode for • Brushless Motor FREE
precision fastening & automatic shut-off • Includes:
(1) 3” Carbide Abrasive Blade M12 REDLITHIUM™
2552-20 - 1/4” Impact Wrench (1) 3” Diamond Tile Blade 6.0Ah Battery
• Max Torque: 100 ft-lbs (1) Blade Wrench MIL-48-11-2460X
• Impacts: 4,000 ipm (1) Metal Cut Off Wheel
2555-20 - 1/2” Impact Wrench (1) 7/16” Flange Adapter $130
• Max Torque: 250 ft-lbs (1) Shoe Guard Value!
• Impacts: 3,200 ipm Kit Includes: (1) 4.0Ah Battery, Charger, and Kit bag
Kits Include: Tool, (2) Batteries
• (2.0Ah & 4.0Ah), Charger & Kit Bag MIL-2522-21XC (Kit)
$23999◉
1/4” MIL-2552-22
1/2” MIL-2555-22 M12 FUEL™ 1/4” Impact Driver Kit
$29999◉
Kit Includes:
M12 1/2” Drill and
1/4” Driver Combo Kit 2553-20 - 1/4”Hex Impact Driver

• 2503 1/2” Drill - 1,700rpm & 2554-20 - 3/8” Impact Wrench
350in/lbs or torque • Kit Includes: (1) 2.0Ah Battery, (1) 4.0Ah

• 2553 1/4” Driver - 3,300rpm Battery, Charger & Tool-Bag
& 1,200in/lbs of torque
MIL-2599-22
MIL-2596-22 $41999◉
$32499◉

M18 Fuel™ 1” Cordless Impact M18 FUEL™ 1/2” Ext. Anvil Impact Power Tools
Wrench Wrench w/ ONE KEY™
• Up to 1,500ft-lbs Fastening, 1,800ft-lbs
Nut Busting Torque • Unique Modes for Sedans, Trucks, and Box
• Up to 25% repeatable torque output with Trucks/Trailers
One-Key enabled
• Kit includes: (2) 8.0Ah M18™ High Output • Up To 1,100 Ft lbs of Nut Busting Torque in
Batteries (48-11-1880) and M18™ & M12™ all Modes
Rapid Charger (48-59-1808) With bare tool
• Kit Includes: Bare Tool, Charger, (2) 5.0Ah
Batteries, Kit Bag

Bare Tool 2 Battery Kit FREE MIL-2769-22 (Kit) MIL-2769-20 (Bare Tool)
MIL-2867-20 MIL-2867-22 $69999◉ $39999◉
$89999◉ $1,19999◉ High Capacity
6.0Ah Battery M12 FUEL™ Right Angle Impact Wrench MBoIoLt -fo4r 925-6146/2-5265564
MIL-48-11-1865X
• Delivers up to 220 ft-lbs. of nut-busting torque
• A 2.2” head profile design allows for more access in
M18 FUEL™ 1/2” GENII Impact MBoIoLt -fo4r 927-6176-2767 tight spaces $2999
Wrench Kit $4499
• LED light to illuminate the work area
• Max Torque: 1000 ft-lbs & 1,400 ft-lbs nut
busting torque MIL-2564-20 3/8” Bare Tool
MIL-2565-20 1/2” Bare Tool
• Impacts: 0-950 / 1,750 / 2,300 ipm $23999◉
• No Load Speed: 0-550 / 1,400 / 1,750 rpm
• Kit includes: Bare Tool, (2) 5.0Ah MIL-2564-22 3/8” 2 Batt Kit
Batteries, Charger, Case Bare Tool
MIL-2767-22 MIL-2767-20 MIL-2565-22 1/2” 2 Batt Kit
MSRP $790.00 MSRP $414.00 $35999◉

$59999◉ $31999◉ with KITS with BARE TOOLS
FREE w/KITS FREE
M18 FUEL Mid Torque ONLY M12 REDLITHIUM™
Impact Wrench M12 REDLITHIUM™ 3.0Ah Battery
6.0Ah Battery $130 MIL-48-11-2430X $90
• More power in a smaller size! MIL-48-11-2460X Value! Value!
• 2,575 max rpm
• Kits Include (2)5.0Ah Batteries, $222 M12 FUEL™ Stubby 2555-20 - 1/2” Impact BMoIoLt -fo4r 925-5146/2-5255554
Value! Impact Wrench Kits Wrench $1999
Charger, and Case • Max Torque: 250 ft-lbs
• Features: 3 RPM Settings ,4th • Impacts: 3,200 ipm
FREE w/5.0Ah mode for precision fastening &
KITS ONLY automatic shut-off
High Capacity
3.0Ah Battery 2552-20 - 1/4” Impact
Wrench
MIL-48-11-1835X • Max Torque: 100 ft-lbs

Kits Include: Tool, (2) Batteries
• (2.0Ah & 4.0Ah), Charger &
PART DESCRIPTION PRICE Kit Bag
MIL-2960-20 3/8” Bare Tool $249.99◉
MIL-2960-22 3/8” Kit - 600 ft/lbs $574.99◉ • Impacts: 4,000 ipm
MIL-2962-20 1/2” Bare Tool $249.99◉ 2554-20 - 3/8” Impact
MIL-2962-22 1/2” Kit - 650 ft/lbs $499.99◉ Wrench
MIL-2960-22CT 3/8” Kit - 2.0Ah Batt $419.99◉ • Max Torque: 250 ft-lbs
• Impacts: 3,200 ipm

M18 FUEL Compact Impact 1/4” MIL-2552-22
Wrench 3/8” MIL-2554-22
1/2” MIL-2555-22
$31499◉

• 250 ft-lbs of torque

• 2,400 max rpm M12 Fuel™ Surge
Hydraulic 1/4” Driver
MIL-2854-20 3/8” Bare Tool
MIL-2855-20 1/2” Bare Tool • FLUID-DRIVE Hydraulic Powertrain™
$23999◉ delivers up to 2X less noise and vibration
MIL-2854-22 3/8” Kit than standard impact drivers
MIL-2855-22 1/2” Kit BMoIoLt -fo4r 928-5146/2-8258554
$47999◉ $3999 • 450 in-lbs of longer sustained torque
Kit Includes: Bare Tool, (2) 2.0Ah Batteries,
FREE w/KITS Charger, and Kit Bag
ONLY
High Capacity MIL-2551-22 (Kit)
3.0Ah Battery $24999◉
MIL-2551-20 (Bare Tool)
MIL-48-11-1835X $17999◉

M18 FUEL™ 3/4” Impact MBoIoLt -fo4r 928-6146-2864 M18 FUEL™ 1/4” Hex
Wrench w/ ONE KEY™ $3499 Impact Driver Kits

• Up To 1,500 Ft lbs of Nut Busting • Max Torque: 2,000 in-lbs
Torque in all Modes • Impacts: 0-4,300 ipm
• No Load Speed: 0-3,600 rpm
• Kit Includes: Bare Tool, Charger, • Kits Includes: (2) Batteries &
(2) 5.0Ah Batteries, Case
Charger & Kit Box
MIL-2864-22 (Kit)
$72999◉ MIL-2853-20 (Bare Tool)
MIL-2864-20 (Bare Tool) $18499◉
$39999◉ MIL-2853-22CT (2.0Ah Kit)
$32499◉
MIL-2853-22 (5.0Ah Kit) 5
$42999◉

Tool News | July-September 2021

Power Tools M12 FUEL™ High Speed Ratchets M12 Fuel™ 1/4” Driver

• Delivers 450 RPM for best-in-class productivity • 4-Mode Drive Control
• Pneumatic ratchet performance with up to 35 • 1,300 in-lbs fastening torque
Kit Includes: Bare Tool, (2) 2.0Ah
ft-lbs max torque Batteries, Charger, and Kit Bag
• Compact head design and recessed shift knob
MIL-2553-22 (Kit)
provide users with more access in tight spaces $22999◉
MIL-2553-20 (Bare Tool)
MIL-2566-20 1/4” Bare Tool $16999◉
$19999◉
MIL-2566-22 1/4” Kit MBoIoLt -fo4r 925-5136-2553
$29999◉ $2499
MIL-2567-20 3/8” Bare Tool
$19999◉ M18 FUEL™ 1/2” Drill / Driver Kit
MIL-2567-22 3/8” Kit
$29999◉ • No Load Speed: 0-550 / 0-2,000 RPM
• Peak Torque: 1,200 in-lbs
M12 FUEL™ Ratchets • Includes: (2) REDLITHIUM™ XC 5.0Ah

• Kits Include: Bare Ratchet, (1) Battery, Batteries, Charger & Blow-Molded Case
Charger, Protective Boot, Reducer* & Kit Bag.
MIL-2803-22
*2556-21 comes with a 1/4” to 3/8” adapter $39999◉

BMoIoLt -fo4r 925-5176-2557 MIL-2803-20 (Bare Tool)
$2999 $16999◉

PART DESCRIPTION PRICE M18 FUEL Hammerdrill/
MIL-2557-20 3/8” Bare Tool $209.99◉ Impact Driver Combo Kit
MIL-2557-21 3/8” Kit - 55 ft/lbs $294.99◉
MIL-2558-20 1/2” Bare Tool $234.99◉ 2804-1/2” Hammerdrill
MIL-2558-21 1/2” Kit - 60 ft/lbs $324.99◉ • 1,200 in-lbs of torque
• 2,000 rpm
M12 Fuel™ Extended BMoIoLt -fo4r 925-5196-2559 2853-1/4” Impact Driver
Reach Ratchets • 2,000 in-lbs of torque
• 3,600 max rpm

MIL-2997-22
$56999◉

• Slim head profile and extended $2999
neck provide users with the MBoIoLt -fo4r 925-6106-2560
longest reach in tight spaces M12™ Cordless Rotary Tool M12™ Compact Inflator
• 1/4” ratchet performs with up to $2999
• Free Speed: 5,000 - 32,000 rpm • 5X the fill speed on car and light truck tires
40ft-lbs max torque • Collet: 1/8” compared to corded and cordless units
• 3/8” ratchet performs with up • Variable Speed Dial for maximum control
to 55ft-lbs max torque • Kit Includes: 26” hose, (3) attachments:
MIL-2460-20 ball inflation needle, inflatable nozzle &
• Kit Includes: Bare Tool, (1) (Bare Tool) presta chuck, (1) REDLITHIUM™ 4.0Ah
$9999◉ XC Battery & Charger
Battery, Charger, and Kit Bag
MIL-2475-21XC
PART DESCRIPTION PRICE
MIL-2559-20 1/4” Bare Tool $279.99◉ MSRP $266.00
MIL-2559-21 $374.99◉
MIL-2560-20 1/4” Kit $269.99◉ $17999◉
MIL-2560-21 3/8” Bare Tool $359.99◉
M12™ Soldering Iron
3/8” Kit
• 18 Second Heat Up Time
M12 Fuel™ Die Grinders • 3-Stop Pivoting Head: Delivers Unmatched Access
• Easily Switch Between Chisel and Pointed Tips
• 0.3 HP Motor Output • 90w Heater
• More powerful than pneumatic Kit Includes: Bare Tool, (1) Batteries, Charger, and
Case
die grinders
• The most compact cordless die MIL-2488-21 (Kit)
$16999◉
grinder MIL-2488-20 (Bare Tool)
• Get up to 10 mins continuous $9999◉

runtime on one 2.0 battery M12™ Variable Speed
• 4-Mode RPM Control, up to Polisher/Sander

24,500RPM • Free Speed: 8,300 rpm
Kit Includes: Bare Tool, (2) 2.0Ah • Variable Speed Trigger
Batteries, Charger, and Kit Bag • Includes side handle

BMoIoLt -fo4r 924-8156-2485 MIL-2438-22X
$3999 $24999◉
MIL-2438-20 Bare Tool
$17999◉

PART DESCRIPTION PRICE M12 Radio + Charger FREE
MIL-2485-20 Right Angle Die Grinder Bare Tool $199.99◉
MIL-2485-22 $299.99◉ • 12V DC port for quick, convenient M12 REDLITHIUM™
MIL-2486-20 Right Ange Die Grinder Kit $199.99◉ charging of all M12™ Batteries 2.0Ah Battery
MIL-2486-22 Straight Die Grinder Bare Tool $299.99◉ MIL-48-11-2420X
• Full-range speaker and tweeter deliver
Straight Die Grinder Kit clear mids and highs $64
Value!
• 2.1A USB Output: Delivers Fast Electronic
Device Charging 10 Hour of run-time on a
CP2.0 REDLITHIUM™ Batter

MIL-2951-20

$14999◉

6 Tool News | July-September 2021

TOOL NEWS Exclusive 20v MAX XR 1/2” & 3/8” Impact Power Tools
DeWalt Promotions Wrench Combo Kit
Kit Includes:
Available While Supplies Last DCF899HB - 1/2” High Torque Brushless Impact Wrench
• Max Torque: 700 ft-lbs & 1,200 ft-lbs break away torque
• Impacts: 0-2,400 ipm
20v MAX 1/2” Compact • No Load Speed: 0-400 / 1,200 / 1,900 rpm
Impact Wrench DCF883B - 3/8” Brushless Impact Wrench
• Max Torque: 1,560 in-lbs
• Max Torque: 152 ft-lbs • Impacts: 0-2,700 ipm
• Impacts: 0-2,700 ipm • No Load Speed: 0-2,300 rpm
• No Load Speed: 0-2,300 rpm DCL050 - Jobsite Worklight
• Includes: (2) 4.0Ah MAX Batteries, (2) 4.0Ah XR Batteries, Fast Charger & Kit Bag

Charger, Built-In LED & Kit Box. DWA-DCK398HM2
MSRP $1129.99
DWA-DCF880HM2 FREE
$72999◉
MSRP $731.93
20V MAX XR Drill/ $217
$33999◉ Driver Value!
DWA-DCD791BX $217
FREE Value!
20V MAX 1/4” $195 20v MAX XR 3/8”
Impact Driver Value! Brushless Compact
DWA-DCF885BX Impact Wrench

20v MAX XR 3/8” Compact • Max Torque: 150 ft-lbs
Impact Wrench • Impacts: 0-3,200 ipm
• No Load Speed: 0-2,800 rpm
• Max Torque: 150 ft-lbs • Includes: DCF890B Tool, (2)
• Impacts: 0-2,700 ipm FREE4.0Ah XR Battery, Charger & Bag
• No Load Speed: 0-2,300 rpm DWA-DCF890M2
• Includes: (2) 4.0Ah MAX Batteries, MSRP $846.19
$39999◉
Charger, Built-In LED & Kit Box.

DWA-DCF883M2 20V MAX XR Drill/
Driver
MSRP $779.25 DWA-DCD791BX

FREE$33999◉ 20V MAX XR Brushless 1/2”
20V MAX XR Drill/ $217 Compact Drill / Driver Kit
Driver Value!
DWA-DCD791BX • Max Power: 460 UWO
• 2-Speed Transmission: 0-600 / 2,000 rpm
20V MAX 1/2” Compact Drill / • Includes: (2) 2.0Ah Batteries, Charger & Case
Driver Kit
FREEDWA-DCD791D2
• Max Power: 350 UWO
• 2-Speed Transmission: 0-600 / 2,000 rpm MSRP $378.64
• Includes: (2) 1.5Ah Batteries, Charger &
$24999◉
Kit Bag 20V MAX 1/4” Brushless $195
Impact Driver Value!
DWA-DCD780C2 DWA-DCF887BX

MSRP $378.64 20v MAX XR Impact & Grease Gun Combo Kit

FREE$24999◉ Kit Includes:
20V MAX 1/4” Brushless $195 DCF899HB - 1/2” High Torque Brushless Impact Wrench
Impact Driver Value! • Max Torque: 700 ft-lbs & 1,200 ft-lbs break away torque
DWA-DCF887BX • No Load Speed: 0-400 / 1,200 / 1,900 rpm
DCGG571B - High Volume Grease Gun
18v to 20v Power Converter • Delivers 10,000 Max Psi.
DCL043 - Jobsite work light
• Compatible with MOST 18v DeWalt Tools.
• Allows for use of most 20v Batteries in 18v Tools. FREE(2) 4.0Ah XR Batteries, Charger, & Bag

DWA-DCA1820 DWA-DCK397HM2

MSRP $72.75 Total Value $1,318.99

$5499 $67999◉

20V MAX Angle
Grinder Bare Tool
DWA-DCG413BX

IQV20 Next Gen 1/2” Drive 20v Right-Angle
High-Torque Impactool™ Impactool™

• Features: Brushless Motor, Shadowless • Max Torque: 180 ft-lbs
LED light ring, 4 power control modes • Impacts: 3,000 ipm
and is only 8.1” long & 7.6lbs! • Max Free Speed: 1,900 rpm

• Max Torque: 1,000 ft-lbs & 1,500 ft-lbs FREE20V 2.5Ah Battery
nut-busting torque!
BL2012X
• Kit Includes: W7152 Tool, 5.0Ah
Battery, Charger & Kit Bag

FREE $225 $140
Value!
with kit only
20V 5.0Ah Battery Protective Boot Value! PART DESCRIPTION PRICE
BL2022X W7152-BootX

PART DESCRIPTION PRICE ING-W5330-K12 3/8” Right-Angle Impactool™, 1-Battery Kit $499.99◉
ING-W7152-K12 5.0Ah, 1-Battery Kit $559.99◉
ING-W5350-K12 1/2” Right-Angle Impactool™, 1-Battery Kit $519.99◉

7Tool News | July-September 2021

Power Tools CORDLESS BATTERIES CORDED ELECTRIC
AND CHARGERS
Bench Grinders Grinder Stand
6” w/ Worklight SUN-5003
SUN-5001A
• For use with 6” & 8” Grinders.
• No Load Speed: 3,450 RPM Stands 36” Tall and comes with
MSRP $294.71 pre-drill holes for floor mounting.

$18499◉ MSRP $152.75

$11499

6” FREE
DWA-DW756
8” Wire Wheel
• No Load Speed: DWA-DW4906X
3,450 RPM

MSRP $174.00

$14999◉
8”
DWA-DW758

• No Load Speed:
3,600 RPM

MSRP $238.00

$19999◉

41/2” Small Angle Grinders

DWA-DWE402 DWA-DWE4011 Buy either angle

• 11amp w/1.8hp Motor • 7amp w/1.14hp Motor FREEgrinder, get a
• Paddle Switch • Slide Switch
• No Load Speed: 11,000 RPM • No Load Speed: 12,000 RPM Carbon Fiber Knife
MSRP $148.98 MSRP $117.64 DWA-DWHT10314X

$11999◉ $7999◉

PART DESCRIPTION PRICE
$79.99◉
MIL-48-11-2420 2.0Ah 12v Battery $89.99◉
$119.99◉
MIL-48-11-2430 3.0Ah 12v Battery $129.99◉
$119.99◉
MIL-48-11-2440 4.0Ah 12v Battery $134.99◉
$169.99◉
MIL-48-11-2460 6.0Ah 12v Battery $299.99◉
$199.99◉
MIL-48-11-1820 2.0Ah 18v Battery $299.99◉ 14” Abrasive Chop Saw FREE
$79.99◉
MIL-48-11-1835 3.0Ah 18v HIGH OUTPUT Battery $79.99◉ • No Load Speed: 4000 RPM 14” Chop Saw
$159.99◉ Wheel
MIL-48-11-1850 5.0Ah 18v Battery $199.99◉ DWA-D28730 DWA-DW8003X
$399.99◉
MIL-48-11-1852 5.0Ah 18v Battery 2-Pack MSRP $368.36 Random Orbital
Buffer / Polisher
MIL-48-11-1880 8.0Ah HD 18v Battery $29999◉ TIT-22610

MIL-48-11-1812 12.0Ah HD 18V Battery 11amp Variable Speed 7” • Motor: 0.92amp,
Polisher / Sander 3,000rpm
MIL-48-59-1812 12v-18v Charger
• Dial Speed Control: 1000-3000 rpm $4499
MIL-48-59-1808 12v-18v Rapid Charger • Includes Hook & Loop disk, Polishing

MIL-48-59-1810 12v-18v Field Charger Bonnet, and Rubber Pad

MIL-48-59-1811 12v-18v Super Charger TIT-22530
$13499◉
MIL-48-59-1852P 5.0Ah 18v Starter Kit
M18 Cordless 7” Polisher
M18™ TOP-OFF™ 175W
Power Supply • Variable Speed: 0-2,200 rpm
• Includes (1)Backing Pad (1)Screen
• Ideal for laptops, cellphones, TVs,
and other small devices Cover (1)Side Handle

• Includes USB-C port, USB-A port, MIL-2738-20
and 120V AC Outlet $28999◉
MIL-2738-21
**Battery not included** $46999◉

MIL-2846-20
$12999◉

8 Tool News | July-September 2021

231 SERIES - 1/2” Impactool™ QUIET Composite 1/2” 3/8” Titanium Impactools™ Power Tools
Super-Duty Impactools™
1/2” Impactool™ 2130 • Max Torque: 300 ft-lbs
• Max Torque: 780 ft-lbs & 1,100 • Free Speed: 15,000 rpm
• Max Torque: 590 ft-lbs • Max Torque: 550 ft-lbs ft-lbs nut-busting torque
• Free Speed: 8,000 rpm • Free Speed: 9,000 rpm ING-2115TiMAX
• Free Speed: 11,000 rpm
ING-231C ING-2130 • Impacts: 1,250 ipm MSRP $381.00

MSRP $229.00 MSRP $320.00 ING-2135QXPA $24999◉

$15999◉ $22499◉ MSRP $402.00 FREE

ING-231H FREE $26999◉ Protective Boot
2115MBootX
MSRP $255.00 Protective Boot FREE
231BootX w/231C,231H 3/8” Impactool™
$17499◉ Protective Boot
2135MBootX • Max Torque: 150 ft-lbs
Titanium Series 1/2” Impactools™ • Free Speed: 10,200 rpm
QUIET Composite 3/8”
• Max Torque: 930 ft-lbs & 1,350 ft-lbs nut-busting torque. Impactools™ ING-212
• Free Speed: 8,500 rpm
• Impacts: 1,220 ipm • Max Torque: 300 ft-lbs MSRP $276.00
• Free Speed: 15,000 rpm
High-Viz • Impacts: 1,500 ipm $19999◉
Lime Green!
ING-2115QXPA Snub Nose Impact
BUY ANY 2235TiMAX AND GET A Now in Red $21499◉ Wrench
AST-1822 (1/2”)
FREE FREE
• Max Torque: 450 ft-lbs
Protective Boot Protective Boot • Free Speed: 10.000 rpm
2235MBootX 2115MBootX MSRP $180.00

Nano Angle $11999◉
Impact Wrench

• Industry leading 415 ft/
lbs. of MAX torque

• Free Speed: 9000 r.p.m.

AST-1832 (1/2”)
AST-1838 (3/8”)
$14999◉

PART DESCRIPTION PRICE
ING-2235TiMAX
ING-2235TiMAX-G TITANIUM Impactool™ $349.99◉
ING-2235TiMAX-R
ING-2235QTiMAX TITANIUM Impactool™ in Hi-Viz Green $349.99◉ “Snub-Nose” Impact
ING-2235QTiMAX-2 Wrenches
TITANIUM Impactool™ in Red $349.99◉
• Free Speed: 9,000 rpm
TITANIUM Impactool™ Quiet $399.99◉
CPT-7731 (3/8”)
TITANIUM Impactool™ Quiet 2” Anvil $429.99◉
• Max Torque: 415 ft-lbs
1/2” Heavy Duty 2” Anvil ING- 36QMAX (1/2”)
Impact Wrenches CPT-7748-2 CPT-7732 (1/2”)
• Max Torque: 470 ft-lbs
• Max Torque: 960 ft-lbs & MSRP $341.96 • Max Torque: 415 ft-lbs • Free Speed: 8,000 rpm
1,400 ft-lbs Take-off MSRP $257.03 MSRP $254.00
$21999◉
• Free Speed: 7,000 rpm $17999◉ $17999◉
• Impacts: 1,350 ipm
Ultra-Compact Impactools™
CPT-7748 ING-15QMAX (3/8”)

MSRP $331.66 • Quiet Technology
• Max Torque: 380 ft-lbs
$21499◉ • Free Speed: 8,000 rpm
MSRP $254.00

$17999◉

Air Flex Mini 1/2” Impact FREE FREE

• Patented “Air Flex Mini Swivel” integrated in Protective Boot Protective Boot
the handle making them the most ergonomic 35BootX 35BootX
air impacts on the market
3/8” Butterfly Wrench 3/8” Butterfly Impact Wrench
• Patented forward torque settings, making it
the most controllable air impact on the market • Max Torque: 90 ft-lbs • Max Torque: 75 ft-lbs
• Free Speed: 9,500 rpm
• 960 ft/lbs max torque AST-136E
• Compact Size, One hand Forward/Reverse, CPT-7722 $6999

and Super Comfortable Grip MSRP $275.47
• 2 year warranty
$19999◉
CPT-7755AFM
$33999◉

9Tool News | July-September 2021

Power Tools Ultimate Impactools™ w/ RATCHETS 109XP/1099XP
QUIET Technology
• Torque: 76 ft-lbs
• Max Torque: 1,350 ft-lbs • Free Speed: 220 rpm
• Free Speed: 7,000 rpm
• Patented one-hand forward/reverse 105-D2/105-D3 107XP/1077XP

control for easy operation • Torque: 25 ft-lbs • Torque: 54 ft-lbs
• Optimized air flow for maximized • Free Speed: 250 rpm • Free Speed: 160 rpm

performance

FREE Socket Set FREE With
SK6H8LNX 107XP/1077XP
w/2145QiMAX and 109XP/1099XP
Protective Boot Protective Boot
2145MBootx 107BootX/109BootX

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
ING-2145QiMAX 3/4” Drive $649.99◉ ING-105-D2 1/4” MINI Ratchet $134.99◉
ING-2155QiMAX 1” Drive $739.99◉ ING-105-D3 3/8” MINI Ratchet $129.99◉
ING-107XP 3/8” Heavy Duty Ratchet $109.99◉
3/4” Heavy Duty 3/4” Impactools™ ING-1077XP 1/2” Heavy Duty Ratchet $139.99◉
Impactools™ ING-109XP 3/8” High Torque Ratchet $199.99◉
• Max Torque: 1,050 ft-lbs ING-1099XP 1/2” High Torque Ratchet $214.99◉
• Max Torque: 1,200 ft-lbs • Free Speed: 6,000 rpm
• Free Speed: 5,500 rpm 886/886H 9426/9427
ING-259
ING-261 • Torque: 50 ft-lbs • Torque: 27 ft-lbs
MSRP $616.00 • Free Speed: 270 rpm • Free Speed: 270 rpm
MSRP $830.10
$45999◉
$54999◉
FREE
FREE
Protective Boot
Protective Boot 259BootX
261Bootx

Socket Set
SK6H8NX

3/4” HD Impact PART DESCRIPTION PRICE
Wrench CPT-886 3/8” Standard Ratchet $99.99◉
CPT-886H 1/2” Standard Ratchet $99.99◉
• Max Torque: 1,440 ft-lbs CPT-9426 1/4” Stubby Ratchet $159.99◉
• Free Speed: 7,000 rpm CPT-9427 3/8” Stubby Ratchet $159.99◉

CPT-7769

MSRP $931.04

$62999◉

3/4” Impact Wrench 3/4” Compact 3/8” Mini AST-1128
Impact Wrench Ratcheting Wrench
• Max Torque: 1,200 ft-lbs MSRP $187.10
• Free Speed: 6,300 rpm • Max Torque: 1,050 ft-lbs • Torque: 50 ft-lbs
• Free Speed: 4,850 rpm • Free Speed: 700 rpm $11999◉
CPT-7763
CPT-7762 DRILLS
MSRP $768.00
MSRP $855.14 7802RA 7803RA 7807R
$54999◉ • 0.5hp motor • Free Speed: 500 rpm
$41999◉ • Free Speed: 2,000 rpm • Reversible Motor
1” Impact Wrenches • Free Speed:
1” H.D. Impactool™ 1” Pistol Grip Impact
Wrench 1,800 rpm
• Max Torque: 1,700 ft-lbs
• Free Speed: 5,000 rpm • Delivers 2,000 ft lbs of reverse torque
• Weighs in under 20lbs!
ING-295 • 360° adjustable handle

Total Value $1,229.00 ING-2175MAX

$76999◉ MSRP $1160.00

$89999◉

ING-285B-6 CPT-7782-6 PART DESCRIPTION PRICE
ING-7802RA 3/8” Reversible Drill Geared Chuck $179.99◉
• Max Torque: 1,770 ft-lbs • Max Torque: 1,920 ft-lbs ING-7803RA 1/2” Reversible Drill Geared Chuck $254.99◉
• 1,000 ft-lbs in 2 sec with • Free Speed: 5,200 rpm ING-7807R $129.99◉
• 25lbs 3/8” Angled Reversible Drill
FAST-Torque™
• Free Speed: 5,000 rpm ING-2850MAX-6 7300C 879C
• Free Speed: 2,800 rpm • Free Speed: 1,800 rpm
FREE• 28lbs • Max Torque: 2,100 ft-lbs
Socket Set • Free Speed: 5,500 rpm
SK8C5TNX w/285B-6 • 22lbs

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
ING-285B-6 1” Impactool™ $659.99◉ CPT-7300C 1/4” Mini Drill $134.99◉
ING-2850MAX-6 1” High-Torque Impactool™ $899.99◉ CPT-879C 3/8” Standard Angled Drill $139.99◉
CPT-7782-6 1” High-Torque Impact Wrench $679.99◉
ING-285BS-6 5 SPLINE Drive $849.99◉

10 Tool News | July-September 2021

DIE 860 (classic) 872 875 876 Power Tools
GRINDERS
• Free Speed: 24,000 rpm • Free Speed: 22,000 rpm • Free Speed: 22,500 rpm • Free Speed: 30,000 rpm
• 0.54 HP Motor • 0.60 HP Motor • 0.30 HP Motor • 0.30 HP Motor
• 1/4” & 6mm collets

9160 See Page 13 for Accessories/Replacement Parts

• Blows: 32,400 bpm 9108QB 9106QB PART DESCRIPTION PRICE
• 6.5ft Hose • Free Speed: 22,000 rpm • Free Speed: 22,000 rpm CPT-860 Classic HD Die Grinder $144.99◉
• 0.32 HP Motor • 0.32 HP Motor CPT-872 Standard Duty Die Grinder $89.99◉
9105QB CPT-875 Mini 90 Angled Die Grinder $84.99◉
CPT-876 Mini Straight Die Grinder $79.99◉
• Free Speed: 28,000 rpm CPT-9160 $164.99◉
• 0.32 HP Motor Engraving Pen
• 1/4” & 6mm collets

9110QB 9111QB While supplies CPT-9105QB Straight Die Grinder $94.99◉
flsaoesrrtin,eessweoenm7po4adXgeXels3! CPT-9106QB 90° Angled Die Grinder $114.99◉
• Free Speed: 25,000 rpm • Free Speed: 25,000 rpm CPT-9108QB 120° Angled Die Grinder $114.99◉
• 0.32 HP Motor • 0.47 HP Motor CPT-9110QB 10” Extended Die Grinder $114.99◉
CPT-9111QB HD Quiet Die Grinder $149.99◉

301B 302B 307B 308B 301B-3MK

• Free Speed: 21,000 rpm • Free Speed: 18,000 rpm • Free Speed: 28,000 rpm • Free Speed: 25,000 rpm • (8) 3” Pads & Holder
• 0.25 HP Motor • 0.33 HP Motor • 0.25 HP Motor • 0.33 HP Motor

5102MAX 5108MAX

• Free Speed: 20,000 rpm • Free Speed: 25,000 rpm
• 0.40 HP Motor • 0.40 HP Motor

See Page 13 for Accessories/Replacement Parts

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
$69.99◉ ING-308B HD Composite Straight Die Grinder $94.99◉
ING-301B 90° Angle Die Grinder $139.99◉ ING-5102MAX $179.99◉
$119.99◉ ING-5108MAX MAX 90° Angle Die Grinder $169.99◉
ING-301B-3MK 301B 3” Surface Prep Kit $64.99◉ MAX Straight Die Grinder

ING-302B HD 90° Angle Die Grinder

ING-307B Straight Die Grinder

218 T20AH AST-233 Reversible Cut-Off Tool High-Speed Cut-Off Tool

• Free Speed: 56,000 rpm • Free Speed: 20,000 rpm • Free Speed: 52,500rpm • Free Speed: 20,000 rpm • Free Speed: 22,000 rpm
• 0.33 HP Motor • Wheel Diameter: 3” • Wheel Diameter: 2-7/8” (73mm)
• Comes w/(5) Cut-Off Wheels
CPT-874
ING-426
MSRP $118.94
MSRP $135.70
$7999◉
$9999◉

See Page 13 for Accessories/Replacement Parts ONYX Cut-Off Tools Extended Length Cutting Tool
AST-409
PART DESCRIPTION PRICE • Free Speed: 14,000 rpm
• Free Speed: 14,000 rpm • Wheel Diameter: 2-7/8” (73mm)
AST-218 1/8” Pencil Grinder $54.99 • Wheel Diameter: 4”
MSRP $126.38 CPT-9116
AST-233 1/8” 95° Pencil Grinder $114.99◉
$9999 MSRP $390.30

AST-T20AH 90° Angle Die Grinder $59.99 $26999◉

See Page 13 for Replacement Parts

MAX Grinder Reciprocating Saws Low Vibration ONYX Gear Driven Heavy Duty Air Saw
ING-429 AST-930
• Free Speed: 12,000 rpm • 250% more cutting capacity than standard air saws
• 0.88 HP Motor • Strokes: 10,000 spm • Strokes: 9,500 spm • Cut quicker and thicker up to 1/4” (6.4mm) mild steel
MSRP $160.80 MSRP $112.51 • Accepts universal 1/2” shank standard saw blades
ING-3445MAX (4.5”)
$9999◉ $8499 •A SStrTo-ke9s3p6er Minute: 7,000
MSRP $432.20 $16999◉

$33999◉

See Page 13 for Replacement Parts 11

Tool News | July-September 2021

Power Tools Nut Setter AST-PR36 AST-PR14 Riveters Heavy-Duty Nibbler
AST-PRN1(3/8” rivets) CPT-9882 AST-727
• Includes (4) nose pieces • Includes (5) nose pieces
• Includes (8) nose pieces: 3/16”, 5/32”, 3/32”, 1/8” 3/16”, 5/32”, 1/4”, 3/32”, • Includes (4) nose pieces • Up to 17 Gauge
M4, M5, M6, M8, 1/4”, 1/8” 3/32”, 1/8”, 5/32”, & 3/16” • Free Speed: 3,500 CPM
5/16”, 3/8” MSRP $147.43 MSRP $94.28
MSRP $184.00 MSRP $224.22
MSRP $390.50 $11499 $7499
$12499 $16999◉
$24999◉

Caulking Gun Undercoat Gun Punch/Flange Tools

• 8-1/4” long w/an inside diameter of 2” • Compatible w/all popular brands of • Performs hole punching & crimping
• Air Pressure: 40-90psi undercoat, and applies in any viscosity • Crimping & Punch Capacity: (1/16”)
Punch Diameter: 8mm (5/16”)
AST-405 AST-UCG100
$2999 $2999 AST-608PT (Pistol)
AST-608ST (Straight)
Needle Scalers Weld Flux Chipping ING-125
MINI Hammer MSRP $144.09
• 4,600 BPM
• 12” x 1/8” Steel Needles • 19”x1/8” Steel Needles MSRP $301.00 $10999
• 4,000 BPM • 4,800 BPM Pistol Grip
$19999◉
CPT-7115 CPT-7120 115 • 2 Sets of Needles; 19”x1/8” & 29”x5/64”
• 4,800 BPM
MSRP $278.37 MSRP $334.59
CPT-7125
$18499◉ $22499◉
MSRP $304.70
7111 7150
$21999◉
w/quick change
See Page 13 for Replacement Parts

119MAXK
121

See Page 13 for Accessories 116 123MAX
121K6
PART DESCRIPTION PRICE
CPT-7111 3,500 BPM Economy Hammer $74.99◉ 117
CPT-7150 2,100 BPM Heavy Duty Hammer $89.99◉

ONYX Air Belt Sanders See Page 13 for Accessories

• Free Speed: 16,000 rpm PART DESCRIPTION PRICE
• Variable Speed Control ING-115 Short 5,000 BPM Hammer $59.99◉
• (3) Grinding Belts: 40, 60, & 80 grit ING-116 $69.99◉
ING-117 3,500 BPM Hammer $84.99◉
AST-3036 ING-121 2,000 BPM Long Stroke Hammer $134.99◉
ING-121K6 3,000 BPM Super-Duty Hammer $134.99◉
Belt: 3/8”x13” ING-119MAX $179.99◉
ING-119MAXK 121 Kit $199.99◉
$9999◉ ING-123MAX 2,500BPM Long Barrel Hammer $179.99◉
ING-123MAXK $199.99◉
AST-3037 2,500BPM Long Barrel Kit
3,500BPM Short Barrel Hammer
• Belt: 1/2”x18”
3,500BPM Short Barrel Kit
$11999◉

ONYX Micro 2” AST-320 Mini Disc Polisher Kit
Orbital Sanders $11499◉
A(rSaTn-d3o2m1 orbit) • Free Speed: 2,500 rpm
• Free Speed: 16,000 $12999◉ • Pad Size: 3”
• Access to smaller, confined spaces • Spindle Thread: 1/4” x 20
• Ensures a better finish w/3mm orbit • Includes: (1) 3” backing pad
• Spindle: 5/16”- 24 (Female)
(2) 3-1/2” foam pads

CPT-7201P
$14999◉

12 Tool News | July-September 2021

SANDERS 7255 7268 High Speed Sander Power Tools

7200S • Free Speed: 12,000 rpm • Free Speed: 25,000 rpm • Free Speed: 18,000 rpm
• 3/16” Orbit • Includes 3” & 4-1/4” Backing Pads.
• Includes: (1) 2” and 3” backing pads,
(10) 2” 320, 400 and 600 grit sand paper AST-222S

• Free Speed: 15,000 rpm MSRP $54.08
• Pad Size: 2” & 3”
• Spindle Thread: 1/4” x 20 $3999

870 6” DAQ Sander

• Free Speed: 10,000 rpm Dual-Action-Quiet
• Spindle Thread: 5/8”x11 Performance
• Free Speed: 9,000 rpm
PART DESCRIPTION PRICE • Spindle Thread: 5/16”x24
CPT-870 6” Dual Action Sander $79.99◉
CPT-7200S Mini Random Orbital Sander Kit $159.99◉ AST-300SP
CPT-7255 $214.99◉
CPT-7268 6” Orbital Sander $174.99◉ MSRP $82.87
Twin Piston Straight Line Sander
$6499

311A 315 317A PART DESCRIPTION PRICE
ING-311A 6” Dual Action Sander $84.99◉
• Free Speed: 12,000 rpm • 3,000 strokes per minute • (2) back pads: 3” & 5” ING-315 Twin Piston Straight Line Sander $134.99◉
• 3/16” orbit for finishes • Belt Size: 2.75”x17.5” • Free Speed: 18,000 rpm ING-317A High Speed Piston Sander $84.99◉
ING-328B 8” Dual Action Sander $149.99◉
ING-4151 Vacuum-Ready Random Orbital Sander $169.99◉

328B 4151
• Free Speed: 12,000 rpm
• Free Speed: 825 rpm • Pad Size: 6”
• Dual-action pad motion • Orbital diameter: 3/16” 7pc Pneumatic Fan 5pc Pneumatic
Clutch Wrench Set Pilot Punch Set
w/ 5/32” orbit
• Includes: 1/4”, 5/16”, 3/8”, 7/16”, & 1/2”
• Use w/Air Hammer All sizes available Separately

LIS-43300 MAY-32020

MSRP $209.95 MSRP $93.04

$17999 $7499

8pc Set Air Hammer Springs Replacement
Quick Change Spring Needles
• Includes: (4) cylindrical, (2) tree, & (2) ball
• Retains Chisels w/.401” Parker • 9pc Replacement
SGS-BK8 Shanks Needle Set

MSRP $187.30 TOO-94000 ING-PF2219-22-19
$499 $1999
$16999◉ Retain-It 2pc
Safety Device Arbor for Cut-Off Wheels
All shapes and sizes
available indivudually • Collar fits against stop on • Turn a Die Grinder or Drill
Carbide Burr Sets .401” Parker shank chisels into a Cut-Off Tool
8pc Double Cut Standard for 100% contact
TOO-94950
• Includes: (4) cylindrical, (2) tree, & (2) ball TOO-94100 $599
$1599
AST-2181 Cut-Off Wheels
5pc Pneumatic
MSRP $11799 Chisel Kit • 3/8” Arbor Hole
• 25,000 rpm MAX
$8999 • Includes: edging tool, tail pipe
cutter, straight chisel. cutting W1/16h”exe3l”s Cut-Off
5pc Double Cut chisel, & punch TOO-94860 (5pc)
Extra Long Shank $999
ING-9500 100pc 1/16”x3” Cut-Off Wheel Tray
• Includes: (2) cylindrical, $2499 AST-CW3100
(2) tree, & (1) ball
Xtra Long Pneumatic Tools MSRP $126.97
• 4.5” OAL
• Heat Treated Steel, Black Oxide Finish $9999
AST-2185
MAY-32001 (12”) MAY-32016 (2”x18”)
MSRP $117.25 $2999 $3499

$8999 MAY-32002 (18”) MAY-32017 (2”x24”) Replacement Saw Blades
$3999 $3999 6pc Packages
ING-P4CS-6 (24tpi)
MAY-32003 (24”) ING-P4FS-6 (32tpi)
$4999 $1799
Tool News | July-September 2021
13

Shop Equipment DROP SHIP ITEMS Electric-Driven Single-Stage Electric-Driven Two-Stage
Air Compressor Air Compressors
FREE DROP SHIP FOR MOST PRODUCTS
CALL FOR PRICE AND AVAILIBILITY
All Season Compressor Oil Two-Stage Gas-Powered Air
• Increase efficiency, reduce wear & prevent Compressor
carbon buildup.
• Performs 4x’s longer than petroleum-based
lubricants.
*Available in cases of 12

ING-38436739-1
$3499

ING-2475F13GH

ING-SS5L5 ING-2475N5V

Flexzilla® Pro Quiet Technology™
Air Compressors

• Flexzilla® air compressors are the quietest
on the market with the Silencer™ noise
suppresison system

Flexzilla® Pro 7.5HP, Flexzilla® Pro 10HP,
80 Gallon 1-Phase, 80 Gallon 1-Phase,
2-Stage Vertical 2-Stage Vertical
LEG-FXS07080V1 LEG-FXS10V080V1

$419999◉ $439999◉

M18 Cordless 2 Gallon Electric-CDormivepnreTswsoor-sStage Air GasolineC-DormivpernesTswoor-sStage Air QRSScrSeewriCesomQupireetsRsoortsary
Compressor

• 125 MAX PSI
• 1.2CFM at 90 PSI

MIL-2840-20
$49999◉

RCP-7581HS
7.5hp, 80Gal

RCP-1330G QRS-10
13hp, 30Gal 10hp, 132Gal

Lifts Shop Cooling

14 Tool News | July-September 2021

Flexzilla® Retractable Flexzilla® Levelwind BLOW GUNS Shop Equipment
Air Hose Reel Retractable Hose Reel
AST-1717 AST-1716 Air Blow Gun Kit
• Positive Latching Mechanism - 18 in. intervals • Levelwind™ Technology
• 3ft x 1/4” MNPT Lead-in Hose. • Free Standing Base • Kit Includes: 4” angled nozzle blow gun,
• Auto Retract/Latch Hose Mechanism • Latching Mode Switch 15mm, 24mm & 35mm tapered rubber
• Heavy duty mounting bracket and adjustable • (7) Position Locking Bracket nozzle, venturi nozzle, OSHA compliant
• Assembled in USA of U.S. safety nozzle & spray shield
hose stopper
and global components.” TOO-99350

Flexilla® Air Hoses Long Reach Blow Guns

• Maximum Working Pressure: 300PSI • Nozzle o.d.: 0.50”
• Offers Extreme All-Weather Flexibility from -40° to 140° F • Air inlet: 1/4” NPT female
• Lays flat- no memory • Working pressure: 90 psi
• Assembled in USA of U.S. and global components.” • Maximum pressure: 150 psi
• Made in USA (3/8 and 1/4 in. hose assemblies only)
TIT-19993

Flexzilla® Whip Hoses-3/8” 8pc Blow Gun Set

• Increases longevity of the main hose. • Multiple Tips (1 each): Rubber,
• Reduces user fatigue by eliminating weight of coupler/plug. Air Screen, Brass, Safety,
• Ball Swivel increases mobility, 30° tilt in any direction. Adjustable , Nylon,
& Safety Booster Tip
PART DESCRIPTION PRICE
• 1/4” NPT (F)
LEG-L8305FZ 3/8”x50ft Flexzilla® Levelwind Air Hose Reel $254.99
TIT-19436
LEG-L8335FZ 1/2”x50ft Flexzilla® Levelwind Air Hose Reel $299.99 Extra Tips
Turbo Pistol Grip Blow Gun
LEG-L8250FZ 3/8”x50ft Flexzilla® Retractable Air Hose Reel $189.99 MLT-S-181 MLT-S-183
$2999 $1299
LEG-HFZ3825YW2 3/8” x 25ft, 1/4” NPT Flexzilla® Air Hose $34.99

LEG-HFZ3850YW2 3/8” x 50ft, 1/4” NPT Flexzilla® Air Hose $44.99

LEG-HFZ1225YW3 1/2” x 25ft, 3/8” NPT Flexzilla® Air Hose $39.99

LEG-HFZ1250YW3 1/2” x 50ft, 3/8” NPT Flexzilla® Air Hose $69.99 Lever Style Blow Gun
MLT-S-153
LEG-HFZ1250YW4 1/2” x 50ft, 1/2” NPT Flexzilla® Air Hose $79.99
$1499
LEG-HFZ3802YW2B 3/8” x 2ft Flexzilla® Whip Hose $19.99

LEG-HFZ3806YW2B 3/8” x 6ft Flexzilla® Whip Hose $24.99 PART DESCRIPTION PRICE
AST-1717 4” Blow Gun - GREEN $11.99
Flexzilla® Pro Custom Length Whip Hose AST-1718 4” Blow Gun - ORANGE $11.99
AST-1715 13” Blow Gun - Green $13.99
• 3/8” x 6’, 1/4” MNPT High Flow Ball Swivel, 1/4” MNPT AST-1716 20” Blow Gun - ORANGE $15.99
Reusable Fitting TOO-99350 $37.99
TIT-19992 Air Blow Gun Kit $11.99
• Max. working pressure at 70 degrees Fahrenheit: 300 psi TIT-19993 24” Long Blow Gun $14.99
• High Flow Ball Swivel Plug rotates 360° at a 30° angle TIT-19994 36” Long Blow Gun $24.99
TIT-19436 48” Long Blow Gun $14.99
LEG-HFZP3806YW2B 8pc Blow Gun Set
$1999

Recoil Hoses 1/4”X25FT Nylon Hose $2299
3/8”X25FT Nylon Hose $4999
MLT-1669 3/8”X50FT Nylon Hose $7999
MLT-1674
MLT-1675

Retractable Air Hose SideWinder Air Air Hose Holders
Reels w/ Hose Hose Reel
• Strong Magnet Attaches to Ferrous
• Heavy-gauge, steel construction, w/ durable hose. • Capacity: 150 feet of Metal Surfaces to Keep Most 3/8” to
• Slotted mounting base for easy attachment to ceiling, 5/8” OD hose 1/2” Shop Air Hoses off the Floor, Clean
and Accessible.
walls, work benches. Plus (5) position a roller arm. • Air Hose NOT
INCLUDED LIS-49700 - Orange
3/8” x 50’, 1/4” NPT 1/2” x 50’, 1/2” NPT LIS-49750 - Green
LNC-83753 LNC-83754 LIS-50350 $1999
$9999
MSRP $265.42 MSRP $291.20

$19499◉ $22499◉

15Tool News | July-September 2021

Shop Equipment “SPACE-SAVER” WRENCH Low Profile Wrench Rails TOOL ORGANIZERS
ORGANIZER SETS
Fits in even the shallowest Magnetic Wrench Rack Quik-Pik SAE & Metric Wrench
Holds Up To 40 Wrenches! drawers and Will Never Slip! Racks
• Forward/Reverse teeth fits more Holds up to 10 Wrenches
ERN-6050 (Red) • Holds up to 13 wrenches
wrenches. EZR-WR10-RD • Low profile, fits 2-inch deep
• Trims easily for a custom fit. • Holds up to 30 Wrenches $2499
• Graduated design toolbox drawers
ERN-6014 (Red)
ERN-6015 (Black) $1699 SAE-1/4” to 1”
Your Choice HNS-5301(Red)
$1299 Metric - 7 to 19mm
HNS-5302 (Grey)
2pc Wrench Rail Organizers $699

• Holds up to 20 wrenches 3pc Screwdriver Rail Organizers Low Profile
• Cut to fit different sizes Screwdriver Rails
• Holds up to 20 screwdrivers ERN-6040 (Red)
ERN-6012 (Red) • Cut to fit different sizes
ERN-6013 (Black) • Holds up to 14 screwdrivers
Your Choice ERN-6010 (Red)
$799 YEoRuNr-C6h01o1ic(eBlack) $999
$799

“GRIPPER” Wrench Organizers

“GRIPPER” flexible teeth provide wrench security for
travel. Includes a flexible handle and it hangs on a wall

“GRIPPER” Screwdriver 12pc Screwdriver
Organizer Organizers

• Holds up to 10 screwdrivers • Slotted for hanging

ERN-5310 (Red) ERN-5090 (Red)
$699 ERN-5091 (Black)
Your Choice
PART COLOR DESCRIPTION PRICE $699
ERN-5084 RED 9-Tooth (1/4” to 3/4” / 6 - 15mm) $6.99
ERN-5085 9-Tooth (1/4” to 3/4” / 6 - 15mm) $6.99 Miscellaneous Parts & Tool Trays
ERN-5086 BLACK 11-Tooth (1/4” to 7/8” / 6 - 16mm) $6.99
ERN-5087 RED 11-Tooth (1/4” to 7/8” / 6 - 16mm) $6.99
ERN-5088 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $7.99
ERN-5089 BLACK 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $7.99
ERN-5082HV RED 15-Tooth (1/4” to 1-1/8” / 6 - 20mm) $8.99

BLACK
Hi-Viz

STUBBY WRENCH “GRIPPER” ORGANIZERS
10-Tooth 11-Tooth
ERN-5074 (Red) ERN-5076 (Red) 10-Compartment Tray 3-Compartment Tray
ERN-5075 (Black) ERN-5077 (Black)
Your Choice Your Choice • 11”L X 16”W X 1.5”H • 10.5”L X 10.5”W X 1.5”H
$699 $699
ERN-5010 (Red) ERN-5020 (Red)
Wrench Organizers ERN-5011 (Black) ERN-5021 (Black)
ERN-5012 (Blue) ERN-5022 (Blue)
Slotted for hanging YEoRuNr-C5h01o7icHeV (HiViz) YEoRuNr-C5h0o2i3cHeV (HiViz)
$999 $799

PART COLOR DESCRIPTION PRICE 24” Locking Tool Holder The Plier Pro
ERN-5066 15-Tooth $7.99
ERN-5067 RED 15-Tooth $7.99 Four 3/8” slots, one 7/16” slot, four 1/2” slots, • Dimensions: 10” x 3.5” x 3”
ERN-5068HV BLACK 15-Tooth $7.99 two 5/8” slots and two 3/4” slots. Lock feature
ERN-5060 HiViz 16-Tooth $7.99 secures tools to the toolbox without taking up ERN-5500 (Red)
ERN-5061 16-Tooth $7.99 valuable drawer space. Slotted mounting holes $1299
ERN-5062HV RED 16-Tooth $7.99 to fit most toolboxes and carts. ERN-5505HV (Hi-Viz)
ERN-5160 BLACK $7.99 $1499
ERN-5161 HiViz 16-Tooth-Reversible $7.99 LIS-49490
ERN-5162HV 16-Tooth-Reversible $7.99 $5499
ERN-5063 RED 16-Tooth-Reversible $9.99
ERN-5064 BLACK $9.99 10” Locking Air Tool Holder
ERN-5065HV HiViz 19-Tooth $9.99
19-Tooth • Organize your air tools with this handy tool holder! Holds up to 5 air tools in a
RED 19-Tooth 10” space. Can be mounted on a tool box, shelf, wall or table!
BLACK
HiViz LIS-49960

MSRP $28.55

$2499

24” Magnetic Bar Holder AST-7324
$2499
Organizes Your Tools & Holds them Securely

16 Tool News | July-September 2021

SOCKET ORGANIZERS Magnetic Socket Rails Shop Equipment

Dura-Pro Twist Lock Rotating socket clips make loading and unloading easy
Socket Organizers Aluminum frame
Sockets can easily rotate 360° for quick identification

APE-83126 (1/4”Dr)
APE-83127 (3/8”Dr)
APE-83128 (1/2”Dr)
$2499 each

1/4” 3/8” 1/2” Organize Your Sockets For Quick, Easy
Identification By Size And Style
ERN-8420 ERN-8421 ERN-8422
18” Standard 18” Standard 18” Standard All organizers hold regular and deep sockets.
ERN-8420M ERN-8421M ERN-8422M Made in U.S.A.
18” Magnetic 18” Magnetic 18” Magnetic
BLACK

RED ERN-8400 ERN-8401 ERN-8402 1/4” 3/8” 1/2”
18” Standard 18” Standard 18” Standard
ERN-8400M ERN-8401M ERN-8402M GREY 4mHNmSto-11450m2m 6mHNmSt-o32800m2m 10HmNmSt-o12270m2m
18” Magnetic 18” Magnetic 18” Magnetic

BLUE ERN-8403 ERN-8404 ERN-8405
18” Standard 18” Standard 18” Standard
ERN-8403M ERN-8404M ERN-8405M
18” Magnetic 18” Magnetic 18” Magnetic

STANDARD $799 RED H1N/8”St-o145/80”1 HN1/4S” -t3o810” 1 H3N/8”St-o12110/4”1
MAGNETIC $1699
HNS-1405 HNS-3805 HNS-1205
Socket Boss ORANGE 1/8” to 5/8” 1/4” to 1” 3/8” to 11/4”
2-Rail - 1/4”, 3/8”, 1/2”, & 3/4” Dr HNS-1206
HNS-1406 HNS-3806
Includes Socket Tray, (2) 18” Socket Rails & (30) Twist-Lock Socket Clips 4mm to 15mm 6mm to 20mm 10mm to 27mm
*3/4” Dr. Comes with (14) Socket Clips
HNS-1403 HNS-3803 HNS-1203
GREEN 1/8” to 5/8” 1/4” to 1” 1/4” to 1”

HNS-1404 HNS-3804 HNS-1204
4mm to 15mm 6mm to 20mm 6mm to 20mm

$1099 $1299 $1499
SETS
COLOR
PART COLOR DESCRIPTION PRICE PART RED DESCRIPTION PRICE
ERN-8461HV 1/4” Drive $19.99 HNS-9301 GREY $34.99
ERN-8462HV HiViz 3/8” Drive $19.99 HNS-9302 RED & SAE (1401,3801,1201) $34.99
ERN-8463HV HiViz 1/2” Drive $19.99 HNS-92000 GREY $64.99
HiViz 3/4” Drive $24.99 Metric (1402,3802,1202)
ERN-8458 RED 3/4” Drive $24.99 HNS-92001 GREEN COMBINATION (1401, 1402, 3801, $64.99
ERN-8459
BLUE HNS-92002 ORANGE 3802, 1201, 1202) $64.99
COMBINATION (1403, 1404, 3803,

3804, 1203, 1204)
COMBINATION (1405, 1406, 3805,

3806, 1205, 1206)

3-Rail Universal (1/4”, 3/8”, & 1/2”) 1/2” 3 Row Socket Organizers

Includes(1) Socket Tray, (3) 18” Universal Socket • Each post is clearly marked for socket size.
Rails, (15) Socket Clips of each Size. No more searching for Loose Sockets!

• Organize your sockets for quick, easy
identification by size and style.

• Post bases beefed-up to hold sockets more
securely

• Each tray holds regular, semi-deep and deep
sockets. **42 Sockets Total**

• Sockets are not included.
• Made of tough ABS plastic that resists oil &

grease
• Fits most U.S. and foreign made sockets
• 100% Made in the USA

PART COLOR DESCRIPTION PRICE HNS-12013 SAE Red HNS-12053 SAE Orange
ERN-8450 RED 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12023 MM Grey HNS-12063 MM Orange
ERN-8451 BLUE 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12033 SAE Green HNS-12073 SAE Hi-Viz
ERN-8460HV HiViz 1/14”, 3/8” & 1/2” Dr $24.99 HNS-12043 MM Green HNS-12083 MM Hi-Viz
Your Choice
17
$1499

Tool News | July-September 2021 17Tool News | July-September 2021

Shop Equipment SOCKET ORGANIZERS THE BIT BOSS

Magnetic Twist Lock Complete Fits up to 90 bits!
Socket Systems
ERN-5710 (Black)
Includes (4) 18” socket organizer rails, $1699
(384) socket ID stickers, organizer ERN-5720HV (HiViz)
mounting kit, face & side mount ratchet and $1999
extension holders, (15) 1/4” socket clips,
(30) 3/8” socket clips, (15) 1/2” socket clips.

ERN-8470 (Red)
ERN-8471 (Blue)

MSRP $46.51

$3999

METAL Rail Socket Organizers HEAVY-DUTY Red 3/8” Drive Master HEX & TORX
Plastic Socket Racks Socket Tray
Each rail has 16 clips.
14 inches long & include 10 studs. • Torx: 27, 30, 40 , 45, 47, 50, 55 & 60
VIM-V420 (1/4”) • Hex (SAE): 1/8”, 9/64”, 5/32”, 3/16”, 7/32”,
VIM-V421 (3/8”) Individual Rails 3 Piece Set
VIM-V422 (1/2”) VIM-V520 (1/4”) VIM-V523 1/4”, 5/16”, 3/8”
VIM-V424 (3/4”) VIM-V521 (3/8”) $3999 • HEX (MM): 4, 5, 6, 7, 8, 9 & 10mm
$799 VIM-V522 (1/2”)
$1399 HNS-50000
All-in-One Tray $999
VIM-V444
$2499 Magnetic Socket
Holders

1/4” 3/8” 1/2”
26 Compartments 28 Compartments 22 Compartments
Up to 5/8” or 15mm Up to 1” or 24mm Up to 1” or 20mm
LIS-40120 (Red) LIS-40200 (Red) LIS-40900 (Red)
LIS-40130 (Black) LIS-40210 (Black) LIS-40990 (Black)
$1999 $2499 $2999

3 Row Socket Organizers 1/4” 3/8” MAGNETIC TRAYS

GREY HNS-14023 HNS-38023 Magnetic Stainless Steel Parts Trays
Metric Metric • Can be used upside-down or on side of vehicle
• Rubber covered magnets will not scratch metal
TIT-11061 TIT-21260

RED HNS-14013 HNS-38013 TIT-11195 TIT-21262 TIT-21263
GREEN SAE SAE
ORANGE PART DESCRIPTION PRICE
HNS-14043 HNS-38043
HiViz Metric Metric TIT-11061 4.5” Diameter x 1” Deep - 12pc Display $4.99
Available
HNS-14033 HNS-38033 TIT-21260 $9.99
SAE SAE TIT-11195 3”, 4-1/4” & 5-7/8” Dishes Set
TIT-21262
HNS-14063 HNS-38063 TIT-21263 8-7/8” (L) x 2-1/2” (W) x 1-1/4” (D) $5.99
Metric Metric
10-1/2” (L) x 11-1/2” (W) x 1” (D) $19.99
HNS-14053 HNS-38053
SAE SAE 14” (L) x 6-1/2” (W) x 1” (D) $14.99

HNS-14083 HNS-38083
Metric Metric

HNS-14073 HNS-38073
SAE SAE

$1499 $1499

PART COLOR SETS PRICE Magetic Expandable
HNS-92003 RED/ $49.99 Parts Holder Set
HNS-92004 GREY DESCRIPTION $49.99
HNS-92005 GREEN $49.99 • Expandable to 2 inches
HNS-92006 Combination 4 Pack 1/4”. 3/8” Dr $49.99 • Includes a red, green, and
ORANGE Metric & SAE
orange tray
HiViz Combination 4 Pack 1/4”. 3/8” Dr
Metric & SAE EZR-EZTRAY-CLR
$2499
Combination 4 Pack 1/4”. 3/8” Dr Quad Tray
Metric & SAE
• 4 separate compartments for easy organization
Combination 4 Pack 1/4”. 3/8” Dr • Includes 1 Quad Tray
Metric & SAE
EZR-EZTRAY-QGR
EZR-EZTRAY-QOR
EZR-EZTRAY-QRD
$2999

18 Tool News | July-September 2021

WORK CARTS & BENCHES PRO 500lb Capacity 5-Drawer 16” x 18” Tool Box Shop Equipment
Service Cart Drawer Liner
• Features: flip top locking lid, screwdriver / pry • Non-adhesive gripping fabric
bar holder, side work shelf, EVA foam liners. • Washable
Heavy-Duty 2-Shelf Plastic 220lb Capacity Adjustable • 40”(H) x 27”(L) x 18.25”(W) • Easily cuts to size
Utility Cart Work Table W/ Drawer • Weight: 117 lbs • Stops sliding and rattling
TIT-30931
• Dimensions: 16”(W) x 30”(L) x 31”(H) & • Designed to house working air tools, plus SUN-8045 (Red) $1499
only 21 lbs! standard screwdriver/pry-bar holder SUN-8045BK (Black)
MSRP $811.21
• Trays are 4” deep & can hold 300 lbs • 1” deep drawer $54999◉
• Weight: 41 lbs
AST-8330
SUN-8019
MSRP $165.05
MSRP $254.31
$11999
$18999◉

ORGANIZERS 9 Compartment 12 Compartment
TIT-21268
4 Compartment $1299 • (8) Small & (4) Large
Compartments
• Dimensions: 4.25”(W) x 12.2”(L) x 2.5”(H)
• All compartments are the same size. TIT-21269
$1999
TIT-21267
$799 11 Bin Small Parts Organizer

4pc Small Parts Organizer 11 Removable bins:
• Seven medium bins
• 4-Pack organizer set contains 4 different organizers • Four small bins
at 3 different sizes for all your storage needs:
TIT-21228
• (1) Large organizer - 11-7/16” x 9-1/16” x 2-3/8” $999
• (2) Small organizers - 6-1/8” x 9-1/16” x 2-3/8”
• (1) Deep organizer - 6-1/8” x 9-1/16” x 4-1/2” 20V Cordless/Corded Wet-Dry Vacuums
(Bare Tool)
TIT-21227
$2199 • Tank Size: 2-gal.
• Filter: Wet/Dry (washable & reusable)
SHOP VACUUMS • Attachments: Crevice & Wide Nozzle
*Batteries & Charger sold separately*
M18™ Cordless Wet/Dry Vacuums
DWA-DCV581H
• Tank Size: 2-gal. $21999◉
• Includes: 6ft Hose, Crevice Tool,
M18™ Compact Vacuum Kit
Utility Nozzle & HEPA filter
*Batteries and Charger Sold • Includes: 4ft Hose, Crevice Tool,
Separately* Floor Tool, (2) Extensions & HEPA filter

MIL-0880-20 *Batteries & Charger sold separately*
$15499◉
MIL-0882-20
M12™ FUEL™ Cordless Wet/Dry $13999◉
Vacuum M18™ Compact Vacuum

• Tank size: 1.6-gal • Tank size: .25-gal
• Includes: Crevice Tool, 5’ Flexible Hose, • Extension Wand, Powered Floor Tool, Floor

HEPA Filter, Utility Nozzle, Wall Mount Tool, 6’ Flexible Hose, Crevice Tool, Utility
*Batteries & Charger sold separately* Tool, Brush Tool
*Batteries & Charger sold separately*
MIL-0960-20
$16999◉ MIL-0940-20
$25999◉
FREE $117
Value! 19Tool News | July-September 2021
M12 REDLITHIUM™
XC 3.0Ah Battery
MIL-48-11-2402X

Shop Equipment DRAINS AND DRIP PANS LIS-17922 LIS-38750 LIS-38780

LIS-17892 LIS-17902 LIS-19722

• 6.25” pan height to fit tight spaces. 1.125” outer LIS-17912 PART DESCRIPTION PRICE
diameter spout for quick and easy pouring LIS-17892 22"x23" Transmission Drain Funnel $19.99
LIS-17982 LIS-17972 LIS-17902 24"x36" Transmission Drain Funnel $49.99
LIS-19722 24"x36"x1" Polyethylene Drip Pan $29.99
LIS-17972 $19.99
LIS-17982 4.5 Gallon Oval Drip Pan - Black $19.99
LIS-17912 4.5 Gallon Oval Drip Pan - Green $44.99
LIS-17922 55 Gallon No Splash Drain Funnel $49.99
LIS-38750 $12.99
LIS-38780 Multi-Drain Tub $24.99
15" No Splatter Pad - Circle
22" No Splatter Pad - Square

FUNNELS LIS-19732 ERN-960
LIS-19702
LIS-19802 LIS-18232 LIS-24680

LIS-17232 LIS-19832 LIS-24780 PART DESCRIPTION PRICE
ERN-960 Harley Davidson Filter Funnel $16.99
Includes new cap for Ford LIS-17232 $9.99
LIS-18232 Right Angle Funnel $14.99
LIS-19802 Right Angle Funnel w/Lid $6.99
LIS-19832 $14.99
LIS-24680 2pc Super Funnel $39.99
LIS-24780 1.6qt Polypropylene Funnel $49.99
LIS-19732 14pc Spill-Free Funnel Set $17.99
LIS-19702 18pc Deluxe Spill-Free Funnel Set $24.99
6qt Polyethylene Oil Dispenser
8qt Polyethylene Oil Dispenser

110v Parts Washers 20 Gallon Standing Sand Blaster
3.5 Gallon Benchtop
• For use with water based solvent • Includes: Hopper, Aluminum Blast
• Can be moved easily • Self draining. Convenient Gun, and 15ft Material Hose
• Ideal for small garages & homes
removable work shelf. • Use with an air compressor
IMP-20-PW312 • Fusible link greatly reduces risk • Compatible with any abrasive:
$11499◉
of fire hazards silica, sand, steel grit, glass beads
• 110 volt solvent pump & pecan shells
• Operating Pressure: 90 PSI
IMP-20-PW20 • Requires at least 3.5 CFM @ 50 PSI
$23999◉ • Nozzle Size: 3/16”
• Air Inlet: ¼” NPT

TIT-19450
$8499

20 Tool News | July-September 2021

BRAKE & PRESSURE BLEEDERS Shop Equipment

Vacuum Pump / Brake Bleeding Kit Vacuum Brake Bleeder
Brake Bleeder
Includes everything for • 1 Liter Capacity reservoir.
Includes everything for performing one-person • Working pressure: 71-113 PSI
performing numerous brake & hydraulic clutch • Maximum pressure: 113 PSI
automotive diagnostic bleeding on automobiles, • 3/8” NPT
and mechanical tests, motorcycles, ATVs,
and for one-person snowmobiles, etc. Also TIT-51885
brake bleeding. works great for siphoning or $2999
transferring fluids from tanks
MTY-MV8000 and reservoirs. Silverline® Elite Kit
$5499
MTY-MV8020 • 2-in-1 Ergonomically Designed Hand Pump
Professional Grade $4999 delivers both vacuum & pressure at a turn of a
Compressed-Air switch.
Brake & Clutch Bleeder Pressure Bleed System
• Kit Includes: 4.5 oz. fluid reservoir bottle w/ fluid
• Compact yet powerful unit • Forces new brake fluid through the master cylinder, while trans-fer and storage lids, diaphragm style 2”
bleeds up to 2 quarts per minute. air & old fluid are expelled through the bleed screws. compound pressure/vacuum gauge w/ rubber
boot, Multiple adapters, (2) Tapered manifold
• Kit includes an advanced selection of • Utilizes push-to-connect, quick-change style accessory plugs, (12) Vacuum cap plugs,(5) Connection
accessories that ensure maximum convenience connections. tubes, Master Cylinder Refill Kit, Custom
and performance for greater productivity. Molded Case, & User’s Manual.
• (7) master cylinder adapters to connect to most
MTY-MV6830 American, Asian, and European cars & light trucks. MTY-MV8500

MSRP $233.52 • 1.2-gallon Fluid Reservoir w/ Integrated Manual Pump, MSRP $117.17
Pressure Gauge, & Pressure Relief Valve.
$18999 $9999
• 5ft Fluid Dispensing Hose w/ flow control and auto-
shutoff valves, dispensing fluid under pressure for
smooth continual flow.

MTY-MV6840

MSRP $500.75

$37499◉

Power Steering Adapter Kit

• MVA660 - Universal cone-shaped rubber
body adapts to the varying diameters of many
automotive power steering reservoirs to form an
airtight seal when vacuum is applied.

• MVA661 - GM Power Steering Adapter
• MVA662 - Ford Power Steering Adapter

MTY-MVA670
$7999

FLUID EVACUATION Pneumativac

Manually Operated Reversing Valve allows for Uses standard compressed
evacuating or dispensing of fluids shop-air & a powerful venture
Requires no electricity or 2.3 Gallon Capacity vacuum to extract fluids in just
compressed air. one minute.
Comes w/ (3) evacuation MTY-MV7201 2.3 Gallon Capacity
tubes & adapters.
1.9 Gallon Capacity MSRP $171.89 MTY-MV7300

MTY-MV7400 $12999◉ MSRP $172.71

MSRP $112.75 Pumps $12999◉
Extraction & Filling
$8999◉ Lever Action Pumps
Fits 5 Gallon Buckets
Fluid Transfer Pump Works with all types of Automotive
LNC-G400 Fluid, including Brake Fluid!
Quick & Easy method to transfer or $4499
siphon all types of fluids including oil, CTA-7075
trans-mission fluid, water, etc. Also
can be used to inflate a wide-range • Capacity: 200cc / 0.22qt
of items (inflation needle included). • Includes spring-loaded
Made of durable polyethylene & will
not rust or corrode. detachable tube w/ cap

MTY-MV7241 $3499
$1999 Lift Drain

Rotary Barrel Pump TOO-17580 Rotary Action Quickly and easily adjusts to the proper
LNC-G402 height. Both models have an integrated
• Fits 15, 30, & 55 gallon drums w/ 2” opening. MSRP $167.81 $7999 oil filter drain shelf for convenience. In
• Dispenses 8-gallons per 100 revolutions. addition to a drain spigot, the 18-gallon
• Made from polyethylene sulfide w/ fluorine $12999◉ models features a bung port that can
be used with a variety of pump systems,
rubber and Teflon(R) seals. while the 8-gallon models have a drain
• Safe to use with: thinners, acetone, DEF cap. All models feature a splash-guard
to catch overspray and casters with
(Urea), gasoline, water, weak acids, wind- over molded steel inserts for long
shield washer fluid, anti-freeze, diesel, service life and easy movement.
alkalines, and petroleum. 8 Gallon

LIS-11102 21

MSRP $193.95

$13499

Tool News | July-September 2021

Shop Equipment 18-Gallon Used Fluid Receiver Professional 17-Gallon
Low Profile Truck Drain
All steel design, w/ 14” telescoping bowl
adjusts from 45”-72”, includes a preset • Reservoir molded from lightweight high-impact polypropylene & mounted
air regulator used w/ standard shop on 4” swivel casters.
air. Receiver includes a safety valve & a
reinforced dispensing hose that doubles • Top of the Reservoir features large 20” x 29” recessed area for capturing
as a sight gauge to prevent overfilling. fluid, and a removable metal screen that keeps out debris.
• 66lbs
• Recessed Pockets at each corner provide storage for drain plugs and filters.
LNC-3601
LNC-3669
MSRP $393.36
• 120v Electric Pump installed
$31499 below the front of the reservoir
for protection.
M18™ Transfer Pump (Bare Tool)
• 6ft Discharge Hose w/ a
• Industry’s first cordless transfer pump J-Hook style spout w/ drip plug
• Pumps water at 480 Gallons per hour
• Lift up to 18 ft. • 54lbs
• Head height: up to 75 ft. MSRP $702.62
• Inlet connection: 3/4 in. brass
• Outlet connection: 3/4 in. brass $53999◉
• Compatible with all M18 REDLITHIUM battery packs
120 lb High Pressure Air LNC-6917 Drum Dolly
MIL-2771-20 Operated Portable Grease MSRP $1401.43 • Use with any 400 lb. drum
Pump Package • Internal Diameter 23-1/4”,
MSRP $338.00 $97999◉
• Free Delivery = 80 cu.In. per minute height 5-1/4”
$25999◉ • Max Pressure = 7500 psi • Hard rubber wheels: 1” wide,
• Ratio = 50:1
• 7ft Grease Hose. 2-1/2” dia.
• 4-wheel Band Dolly Base • Capacity: 650 lbs

LNC-84377
• 39lbs MSRP $175.99
$15999◉

CREEPERS 40” Padded Creeper

Low Profile Plastic Creepers • Weight Capacity: 350 lbs
• Weight: 15lbs
• Dimensions: 38” (L) x 17-1/2” (W) x 4” (H). With • Dimensions: 40-1/8” x 17” x 4”
only 7/8” floor clearance. • Vinyl Padded Head & Back Rest
• Heavy-Duty Frame
• Weight: under 15 lbs.
PRO-C1004
$6999

STANDARD WHEEL (2”)

PART DESCRIPTION PRICE PART DESCRIPTION PRICE Z-Creeper
$119.99◉
LIS-92102 RED Creeper $94.99 LIS-92032 RED Large Wheel Creeper $119.99◉ • Dimensions: 36” (L) x 16-5/8” (W)
$119.99◉ • Weight Capacity: 300 lbs
LIS-93102 YELLOW Creeper $94.99 LIS-93032 YELLOW Large Wheel Creeper • Weight: 16lbs
• Vinyl padded seat and headrest
LIS-93202 ORANGE Creeper $94.99 LIS-94032 BLUE Large Wheel Creeper • (6) 3” Polyurethane Wheels

LIS-93602 PINK Creeper $94.99 Fold-Up Creeper PRO-C2036
$6499
LIS-94102 BLUE Creeper $94.99 Works great on off road situations
and under a vehicle where no jacks
LIS-97102 BLACK Creeper $94.99 or lifts are used. Folds up and hangs
for convenient storage.
LIS-99102 GREEN Creeper $94.99
LIS-95002
Jeepers Keeper™ Creeper Hanger $6999

• Can be Attached to Most Toolboxes, Benches or Walls
• ABS plastic hooks mount anywhere on the 24” wide rail to

accommodate different types of plastic or metal creepers.

LIS-21350
$2499

SHOP SEATS Tractor Seat
EZ Set Pneumatic Hydraulic Shop Stool 2-in-1 Shop Seat & Stool
Professional Shop Seat • Air cylinder for easy
• Adjustable vinyl padded height adjustment • Weight Capacity: 300 lbs
• (5) 2-1/2” casters backrest & seat • Seat Size: 14” x 7-7/8”
• 15-1/4” diagonal tool tray– 1” deep • (5)3-1/2” heavy • Step Size 14” x 9”
• 12-1/2” diagonal seat • Backrest can be set from duty casters with • Weight: 20lbs
• High height: 20-1/2” 1.5”-12” rubber tread.
• Low height: 15-1/2” PRO-C2800
• Weight: 16lbs • Weight: 22lbs • 17” diameter
• 1” deep tool tray
SUN-8509 SUN-8516 • Weight: 30lbs

SUN-8514

PART DESCRIPTION PRICE
SUN-8516 Hydraulic Shop Stool $124.99◉
SUN-8509 EZ Set Pneumatic Shop Seat
SUN-8514 $99.99
PRO-C2800 Tractor Seat $159.99◉
2-in-1 Shop Seat & Stool $69.99◉

22 Tool News | July-September 2021

FLOOR JACKS OTC-LDJ35 SUN-66037JPK Shop Equipment

SUN-6603LP • Capacity | 3.5-ton • Lift Range: 6”-20”
• Lifting range | 5.2” to 21.9” • 3.5-Ton Service Jack w/
• 3 Ton • Reach | 78.5”
• Ultra-Low height at 2.75” • Weight: 92lbs Quick Lift Technology
• High Height: 20” • Pair of 6-Ton Jack Stands
• Weight: 110 lbs • Weight: 150lbs

PART DESCRIPTION PRICE
SUN-6603LP 3 Ton Low Profile Floor Jack $349.99◉
OTC-LDJ35 $379.99◉
SUN-66037JPK 3.5 Ton Service Jack $349.99◉
3.5 Ton Jack and Stand Kit

SERVICE JACKS 22 Ton Heavy Duty Truck Jack

• 5 Ton • Foot Pedal speeds lifting • Self-retracting two stage ram with springs
• Lift Range: 5-7/8” to 22” (7” to 27”). • 8” diameter pneumatic wheels for easy maneuverability
• Weight: 210 lbs • Capacity: 22 Ton
FCroeliglehctt • Spring loaded 40” handle • Minimum Height: 9”
AST-500EX & built in safety overload • Maximum Height (with adapter): 21”
• Ram Travel: 4.5”
OTC-HDJ10 FCroeliglehctt • Handle Length: 42.2”
• Weight: 117 lbs.
• 10 ton, weighs 412 lbs
SUN-6622

MSRP $1,070.84

$67999◉

PART DESCRIPTION PRICE 22 Ton Heavy Duty Truck Jack
AST-500EX 5 Ton Long Chassis Service Jack $729.99◉
OTC-HDJ10 10 Ton Long Chassis Service Jack $1,199.99◉ • Air pressure: 90 - 145 PSI
• Lifting range: 8.27” to 20-2/3” using longest saddle
• Reach: 69.87”
• Saddle: 3” dia., round with center notch.
• Includes 3 saddle lengths:
• Max height using ¾” saddle: 17-3/4”
• Max height using 1-15/16” saddle: 18-15/16”
• Max height using 3-7/8” saddle: 20-2/3”
• Handle length: 47.24”
• Weight: 110lbs

OTC-UA22

MSRP $980.95

$84999◉

TRANSMISSION JACKS Floor Style Transmission Jacks
BHK-BH7011
1/2 Ton Telescopic SUN-7793B FCroeliglehctt
• 1/2 ton/81/2” - 243/4”
• Lift Range: 35.5” to 75.5” • Weight: 102lbs

Transmission Jacks • Weight: 167lbs BHK-BH7210 FCroeliglehctt
• Fully adjustable universal saddle w/
corner brackets safety chain, plus flash • 1 ton/77/8” - 331/2”
chromed ram, & safety overload system • Weight: 198lbs

• Foot operated pump and lowering pedals
AST-500HWA
FCroeliglehctt
• Lift Range: 34” to 70.5”
• Weight: 153lbs
PART DESCRIPTION PRICE
OTC-5019A FCroeliglehctt Hydraulic Transmission Jacks AST-500HWA 0.5 Ton Telescopic Jack $679.99◉
SUN-7793B 0.5 Ton Telescopic Jack $814.99◉
• Lift Capacity: 2,200 lbs BHK-BH7011 0.5 Ton Floor Style Jack $649.99◉
• Lift Range: 8-1/4” to 36-1/2” BHK-BH7210 1 Ton Floor Style Jack $849.99◉
• OAL x OAW: 52” x 32-1/2” OTC-1521A FCroeliglehctt OTC-5019A $2,399.99◉
• Weight: 330lbs OTC-1521A 1 Ton Low-Lift Jack $499.99◉
• 0.5 Ton OTC-1522A 0.5 Ton Hydraulic Jack $1,499.99◉
• Weight: 140lbs 1 Ton Hydraulic Jack

OTC-1522A FCroeliglehctt

• 1 Ton
• Weight: 352lbs

23Tool News | July-September 2021

Shop Equipment 2000lb Folding 4000lb Folding Floor Crane Motor Lift Sling
Engine Stand • Fold up for compact storage, out of your way.
• Max Capacity w/ Boom Extended: 1000 lbs @ 48” • Bolts to Motor Mounting Holes
• 33”(H) x 41.7”(L) x 28.5”(W) • Max Capacity w/ Boom Retracted: 4000 lbs @ 26” • 600lbs Lift Rating
• Resistant to Structural Flex. • Wheel Diameters: Front 3-1/2” / Rear 5-7/8” • Weight: 2.7lbs
• Reinforced Mounting Plate. • Weight: 289lbs
• Locks in 8-Positions. APP-PP7134
• Weight; 132lbs FCroeliglehctt OTC-2004 FCroeliglehctt 700lb Engine Support Bar $2499

SUN-8400 MSRP $892.95 • Supports engines of FWD vehicles. 4000lb Lifting Brackets
• Includes 1/8” braided steel cables and
MSRP $451.70 $66999◉ 1/4” adjustable hooks. • Attach directly onto component for lifting.
• Requires 1/2” diameter bolts.
$33999◉ • Adjustable Length:
OTC-7100
+Min 31” & Max 64” $5999
AST-5820
MSRP $117.48
$8999

LIFTING EQUIPMENT 2pc High-Grip Wheel
Chocks
Car Dollies 1500lb Dolly
• Works great on shop floors or lifts.
3 In 1 Car Dolly • Opens up to 24” and accommodates 12.8” tires • Rubberized Material for extra slip
• Dolly vehicles by the wheel, pinch weld or frame • Unique ratcheting mechanism
• 2,000lb capacity per dolly • Weight: 35lbs resistance.
• Fully stackable, eliminating need for racks *Convenient storage rack • High Compression.
• Weight: 30lbs also available! SUN-7709*
• Sold in sets of 2 ERN-980
SUN-7708 $1999
OME-47020
MSRP $335.41
MSRP $579.04
$24999◉
$39999◉

Underhoist Stands Tripod Stands 48” Farm Jack 3 Ton Long Rams
IMP-20-FJ48
Capacity: 1,500 lbs Capacity: 2-ton $12999 • Made especially for use w/
Range: 56.25” - 85” engine cranes.
SOtaTnCd-wUithHf1oo5t pedal
$16999◉ OTC-UH20 • Collapsed height is 2 feet.
$22999◉
I(MFlPat-2B0a-sLeR)J3
$9999
(IMEyPe-2B0a-sLeR) J3E
$11499

JACK STANDS High Lift SUN-1522A
BHK-BH5010
SUN-1003 SUN-1006 OME-32038 Capacity: 22-Ton
Capacity: 10-Ton Range: 12” - 20”
Capacity: 3-Ton Capacity: 6-Ton Capacity: 3-Ton Range: 28” - 47” Weight: 72lbs
Range: 11” - 17” Range: 15”-24” Range: 12”-17” Weight: 120lbs
Weight: 16lbs Weight: 38.5lbs Weight: 16lbs
BHK-BH5220
SUN-1012
Capacity: 22-Ton
Capacity: 12-Ton Range: 12” - 20”
Range: 19.5”-30” Weight: 85lbs
Weight: 71.15lbs

OTC-1774B HEI-HW93503 PART DESCRIPTION PRICE
SUN-1003C 3-Ton Ratchet Style $59.99
Capacity: 10-Ton Capacity: 3-Ton SUN-1006C 6-Ton Ratchet Style $119.99
Range: 20”-31.5” Range: 12”-17” SUN-1012C 12-Ton Ratchet Style $269.99◉
Weight: 96lbs Weight: 26lbs OME-32038 3-Ton Ratchet Style $79.99
BHK-BH5120 12-Ton Ratchet Style $239.99◉
Jack Stand Covers OTC-1774B 10-Ton Ratchet Style $459.99◉
HEI-HW93503 3-Ton Ratchet Style $99.99◉
Made of high-compression, BHK-BH5010 10-Ton High Lift Pin Style $559.99◉
rubberized material, & fits most BHK-BH5220 $329.99◉
2-ton to 6-ton jack SUN-1522A 22-Ton Pin Style $259.99◉
22-Ton Pin Style
ERN-965
$999

24 Tool News | July-September 2021

BOTTLE JACKS OME-10025W BH2060 OME-10125B BHK-BH2200 Shop Equipment

PART DESCRIPTION PRICE OME-10209W OME-18204C BHK-BH2300
OME-10025W 2-Ton $34.99
BHK-BH2060 6-Ton $54.99
OME-10125B 12-Ton $99.99
OME-10129B $89.99
BHK-BH2200 12-Ton Shorty Type $134.99◉
OME-10209W 20-Ton $139.99◉
OME-18204C $369.99◉
BHK-BH2300 20-Ton Shorty Type $399.99◉
20-Ton Air Actuated

30-Ton

PORTO-POWER® SETS PULLERS A(5P/16P”-C18a6b5le0)

• Snaps together in seconds • 8ft. Pull • Features - 42:1 Leverage, and
• Features: heavy-walled extension tubes, flex-head w/ 6ft. Pull. Cable Limiter, Keeps
APP-EZ2000 Two Wraps of Cable on the
permanently molded rubber pad (interlocked to prevent Ratchet Wheel.
separation), long handle providing low pumping effort, & 1/2 ton APP-72A
hydraulic spreader w/ 2” jaws & spreads 5/8” to 3-3/4”. IMP-16-PP4
*20-Ton Kit NOW Available! Call for Price! • Features: 36:1 Leverage, 6ft Pull, &
Galvanized 3/16” Cable. • Features - 36:1 Leverage, and 6ft. Pull.
4B-HTKo-nB65114 B10H-KTo-Bn65115 Cable Limiter, Keeps Two
• Cast Aluminum Ratchet Wheel,
• Weight: 48lbs • Weight: 92lbs Contoured Grip & Steel Hooks. Wraps of Cable on the Ratchet Wheel.

$37999◉ $57999◉

PORTA JACK Kit 10-Ton APP-18600 (3/16” Cable) IMP-16-LB11210-1

• Features - 36:1 Leverage, and • 10’ Standard Lift w/ the Minimum
6ft. Pull. with Cable Limiter Handle Length of 16-3/8”

• Single-speed hydraulic hand pump & ram w/ OTC-1515B • Chain Distance between Hooks =
6” stroke (10-Ton). $47499◉ 15-3/16” (5/16” dia.)

• Snap design extension tubes.
• 1/2-ton hydraulic spreader tool has 2” jaws
that spread from 5/8” to 3-3/8”. PART DESCRIPTION PRICE
• Carries a 2-year warranty. APP-EZ2000 1-Ton EZ Puller $44.99
• Includes: hydraulic pump, hose, ram, ram flat 2-Ton Power Pull $69.99
base, (4) extension tubes, 1/2 ton spreader, APP-72A $39.99
tube coupling, ram toe, wedge head, APP-18600 2-Ton Puller $69.99
serrated saddle, flex head, plunger toe, 90° APP18650 4-Ton Puller $49.99
wedge head, & case. IMP-16-PP4 4-Ton Puller $249.99◉
*10 ton storage case has wheels for mobility. IMP-16-LB11210-1 1.5 Ton Chain Puller

VISES Floor Mounted 2,200 LB.
Strut Compressor
Professional Shop Vises
KEN-64055 KEN-64065 • Used to easily compress many of the strut assemblies found
• 5.5” Jaw Width • 6.5” Jaw Width on passenger vehicles, including some light trucks. Can be
• Weight: 30lbs • Weighs 41lbs used with varying sizes of struts with coils up to 5/8” diameter
MSRP $220.47 MSRP $286.37
$15999 $20999 • Ideal for passenger vehicles and light-trucks
• Designed for easy, one-person use

CAL-91300

$37499 ◉

Reversible Mechanic's Vises KEN-64800 FREE SHOP PRESSES FCroeliglehctt
KEN-64650 3lb Hammer
• 8” Jaw Width w/64800
• 6.5” Jaw Width • 11” reverse position
• 10” reverse position • Weighs 74lbs
• Weight: 50lbs MSRP $524.50
MSRP $411.48
$31999
$24999

5” Bench Vise w/
Swivel Jaws & Base
TIT-22012
$18499◉

BHK-BH8202 CPT-86501 CPT-86101

• Weight: 236lbs Tool News | July-September 2021

25

Shop Equipment DISPOSABLE GLOVES PLEASE ASK FOR PRICE
AND AVAILABILITY FOR
DISPOSABLE GLOVES
DUE TO MARKET DEMAND

LIGHTNING GLOVES RED LIGHTNING GLOVES
Non-Break Powder Free Nitrile 6 mil Gloves
• Similar to the Black Lightning, but with textured
• Sold in boxes of 100, Also available in cases of 1,000 exterior for better grip!
• Made to match healthy skins natural 5.5ph levels to
LIG-RLS Small
ensure OPTIMUM COMFORT! The unique formula LIG-RLM Medium
reduces perspiration while remaining non-breakable. LIG-RLL Large
LIG-RLXL X-Large
BLACK LIGHTNING GLOVES LIG-RLXXL XX-Large
LIG-BLS Small
LIG-BLM Medium
LIG-BLL Large
LIG-BLXL X-Large
LIG-BLXXL XX-Large
InTouch Black Nitrile 5 mil Gloves
ORANGE LIGHTNING GLOVES
Superior Protection at a Great Price!

LIG-ORS Small Box of 100 Small
LIG-ORM Medium LIG-B311S Medium
LIG-ORL Large LIG-B311M Large
LIG-ORXL X-Large LIG-B311L X-Large
LIG-ORXXL XX-Large LIG-B311XL XX-Large
LIG-B311XXL

Hand/Tool Wipes Electronic Safety Safety Earmuffs Parts Wash Brush w/Flow
Earmuffs Through Handle
• Dual sided • Effective protection against
• Rough abrasive side to break • Independent Volume Control. noise. Includes 27” Flow Through Tube!
• AUX jack for MP3, Cell
tough grit and grime • Ultra light – weighs only 5 oz. BRM-PWA
• Absorbant side that pulls mess phones and 2-way radio. $2499
• NO wires! TOO-14550
away with no residue $2199
• Includes 86 wipes AST-7661
$3999
SKT-SKWIPES1
$2199

Flexzilla® Garden Hose Flexzilla® Garden Hose Water Spray Nozzles
Kit with Quick Connect Nozzle Kit, 3-Piece
Attachments, 1/2” x 50’ • Firefighter Style
• Quick connect attachment • (3) Spray patterns: Gentle shower,
Comes with hose, twist action nozzle, adapter- easily connect to
quick connect stop-flow coupler, spigot sprinkler or other attachments Medium spray or High Power jet
adapter, hose adapters and hose
hanger to make gardening a snap! LEG-HFZGAK02 TIT-11090
$999 $999
LEG-HFZG12050QN
$4499 Flexzilla® Electrical Retractable Twist action adjustable valve for
Extension Cord Reel, 14-3 AWG variable water streams
1/2” x 70ft Retractable SJTOW Cord, 50’
Water Hose Reel • Adjustable cord stopper TIT-11091
• Cord locks in 3ft increments $1799
• Levelwind™ Technology ensures • Circuit breaker with reset button
the hose is coiled smoothly and • Lighted Triple Tap Outlet and Grounded Plug Flexzilla® Pro Extension Cord
easily every time! LEG-FZ8140503 12 ga. x 50ft Extension Cord
MSRP $214.00
• Extra large swivel for maximum flow • Lighted Plug w/glow-in-the-dark stripe.
$15999◉
LEG-L8340FZ LEG-FZ512830

MSRP $342.97 MSRP $78.78

$27499◉ $6999

Flexzilla® Garden Hoses Cord Management Reels 15amp Quad Tap
• 50 ft. cord w/ 12/3 gauge
***WON’T KINK Under Pressure!*** Features Polarized Plugs, Mounting • 40% larger reel w/ smooth
• Maximum Working Pressure: 150PSI Brackets, & LED Power Status Light.
• Leak Free O-Rings 10amp Triple Tap glide rewind.
• Anodized aircraft aluminum ends • 30-ft cord w/16/3 gauge
• Lays flat - no memory SMA-SL8904
• Durable, abrasion resistant outer cover SMA-SL800
• 3/4” - 11 1/2 GHT Fittings MSRP $171.25
MSRP $66.10
PART DESCRIPTION PRICE $12999◉
LEG-HFZG505YW 5/8”x5’ $14.99 $5999
LEG-HFZG510YW 5/8”x10’ $24.99
LEG-HFZG550YW 5/8”x50’ $54.99
LEG-HFZG575YW 5/8”x75’ $79.99

26 Tool News | July-September 2021

AIR CONDITIONING Deluxe R134a/R1234yf Shop Equipment
Conversion Kit
Dual Aluminum Manifold R-1234yf Manifold R134a Side Wheel Mounted
Gauge Set Gauge Set Manifold Gauge Set • Easily convert any R134a manifold gauge
set to a R1234yf manifold gauge set.
• R12/R134a Gauges w/ guards, • Highly visible 3-1/8” Gauges (Bar/PSI) • Includes 72” Hoses
(3) 96” Hoses, Manual Couplers, • (3) 71” Nylon Barrier Hoses MAC-83736-K
1/4” SAE x1/2” ACME F Adapter • Red & Blue = 12mm-M fitting on both RBA-45111
$9499
MAC-293996-PB-CL sides MSRP $224.87
• Yellow = 12mm-M & 1/2”-16 ACME LH AIRVAC™ For both R12 &
MSRP $124.55 Features: Couplers w/ extended $21999◉ R134A
disconnect protection sleeve, &
$9999 piston-type free floating valves reduce • Uses shop air to pull the system
o-ring wear. into vacuum & includes inlet
fittings w/ 1/4” & 1/2” Acme sizes.
MAC-83272
• Free Air Displacement of 1 CFM
MSRP $244.88
RBA-34970
$19999◉ $9999

A/C Vacuum Pumps Dual-Voltage Premium High A/C System Flush Kit
• Number of Stages: 2 • Number of Stages: 2 Vacuum Pump Oil
• Free Air Displacement: 5 CFM • Free Air Displacement: 6 CFM • Designed to work w/ any light
• Ultimate Vacuum: 25 Microns • Ultimate Vacuum: 15 Microns • Thermally Stable - resists weight flushing agent which can be
• Motor: 1/3 hp w/ 1725rpm Pump Speed • Motor: 1/3 hp w/ 3440rpm Pump Speed breaking down due to heat mixed w/ pressurized air.
for a longer period of time.
• Electrical Specs: 110V - 60HZ • Electrical Specs: 110/220V - 50/60HZ • Lower Moisture Content • Remove refrigerant oil debris
during retrofitting or compressor
MAC-90065 MAC-90066-2v-110 helps to improve the ability replacement.
to reach a deep vacuum.
MSRP $591.24 MSRP $398.75 • Includes flush gun, hose, canister, &
RBA-13119-1 (pint) canister adapter.
$44999◉ $29999◉
MAC-91046A
$799 $5999
R(qBuAa-r1t)3203-1 32oz A/C Flush Solvent
$1199
• Effectively removes debris and
Deluxe A/C Service Repair Kit Digital Thermometer/Hygrometer sludge from A/C components
With Bluetooth® Wireless Technology
• Replacement gaskets, depressors, o-rings and • Solvent-based
nylon guides for charging hoses and adapters. • Works with app to remotely provide dry bulb • Evaporates quickly
temperature, wet bulb temperature and relative • Leaves no residue
MAC-85200 humidity.
MAC-91049-32
$3999 • Battery Life: 40 hours continuous use, battery
shelf life 8 months $1499
Condenser Fin Comb
• Battery: one CR2032 lithium cell battery Thermometers
• Cleans & Straightens RBA-10945
condenser & evaporator fins. MAC-52234-BT
• Dial:0°F to 220°F
• 6-sided head for: $4499
8,9,10,12,14,& 15 fins per inch. $1499
Spin-On Recycling RBA-34724
RBA-18403 Filter-Drier $7999 MAC-52220
$1999 • For the following and
• Dial:0°F to 220°F
similar OEM models
• 1770034700 • 34888HD $999
• 34700 • 34988
• 34800 • 34288NI RBA-43240
• 34900 • 34788NI
• 34288 • 34998 • Digital Display
• 34788 • AC1234-4 • 40°F to 390°F/-40°C to 200°C
• Battery Saver w/Auto Shut-Off
Leak Detector Economy Leak
Detector $3499
Both Units Detect ALL
Refrigerants, & Leaks as • 3 Levels of Sensitivity (5 MAC-52223A
small as 1/10oz Per Year Levels of Detection)
• (6) Levels of Sensitivity • -58 to 302˚F (-50 to 150˚C)
• Detects leaks as small as Temperature Range
& (15) Detection Levels 1/10 oz per year
$2499
MAC-56200 • Detects all refrigerants
(CFC’s, HCFC’s, HFC’s) 27Tool News | July-September 2021
Packaged in a blow molded
case with UV glasses, 2 “C” MAC-56100
batteries and sensor tip. $19999

$24999

Hand Tools Cutting Pliers Slip-Joint Pliers Tongue and Groove Pliers
High Leverage
CNL-337 (7”) Designed w/ Wire Cutting Shear CNL-424 (41/2”) $1699
$1999 & PermaLock® fastener that
CNL-338 (8”) eliminates nut and bolt failure. CNL-426 (61/2”) $1399
$2299
Box Joint CNL-526 (61/2”) CNL-420 (91/2”) $1699
CNL-437 (7”) CNL-528 (8”)
$2299 $1299 CNL-430 (10”) $1799
End Cutting
CNL-357 (71/2”) High Leverage CNL-440 (12”) $1999
$2499 Linesmen's
CNL-358 (8”) CNL-460 (16”) $3399
$2999 Less force required for cutting
With Xtreme Leverage CNL-480 (20”) $6499 Wiring Tools
Technology (XLT™)
Adjustable Wrenches 7.5” Forged Handle
CNL-367 (71/2”) XLT Leverage
CNL-368 (81/2”) w/ 20% Greater Jaw Capacity
CNL-369 (91/2”) Comfortable Synthetic Rubber Code CNL-968
CNL-3610 (101/2”) Blue® grip for convenience & firm $4999
$3499 handling.

CNL-806WCB (6”)
$2499

Curved Diagonal Cutting CNL-808WCB (8”) CNL-908
Pliers $2999 $1999

Cable Cutting Forged Convex Head allows the user CNL-810WCB (10”) Stripper & Cutter
CNL-911 (91/2”) to rock objects NEW knife & anvil $3499
$3499 style cutting edge CNL-958
8” Long Reach Pliers CNL-812WCB (12”) $1499
CNL-447 (73/4”) $4499
Designed for long reach $2699 Fence Tool Cutter, Crimper, & Stripper
applications & hard to reach spaces High Leverage
CNL-449 (91/2”) Wire Stretcher, Splicer, & (2) Cutters, CNL-959
CNL-718 (Flat Nose) $3499 Staple Starter & Puller & Hammer $2999
$2199
CNL-85
CNL-E458 (8”) $3499

CNL-748 (End Cutter) + Center Cutting
$2799
$3399

Long Nose Pliers Adjustable Oil Welders Pliers 7pc Nutdriver Set
CNL-317 (8”) Filter Pliers
CNL-326 (6”) • Grove nose for superior High quality, durable clear plastic grip
$2499 • Right angle teeth grip spatter removal
Nutbuster® Pliers in all directions. CNL-ND7A
• Grips & Draws out wire
Parrot Nose is ideal for round • PermaLock® fastener eliminates • Spring Loaded SAE: 3/16” to 1/2”
surfaces. SAFE-T-STOP™ nut & bolt failure.
helps prevent finger pinch. Has CNL-360 $7999
Permalock® fastener that eliminates CNL-209 (9”) $2999
nut and bolt failure
• 4 Adjustments Little Champ® Pliers 6pc Screwdriver Set
CNL-410 (91/2”) • Fits filters up to 31/2” CSiNdLe-CE4u1ttSin(g4”)
$1999 $2999 • High quality, durable clear plastic grip
CNL-414 (14”) $1999 • Slotted - (1/4” x 4”),
$3499 CNL-212 (12”) CSnNiLp-eEN50oSse(6”)
Crimping and $3399 (1/4” x 6”), & (3/16” x 3”).
Cutting Tool • 5 Adjustments • Phillips - (#2 x 4”),
CNL-909 • Fits filters up to 41/2”
$2499 (#2 x 6”), & (#1 x 3”)
$2499
CNL-215 (15”) CNL-SD6A
$4499
• 6 Adjustments
• Fits filters up to 51/2”

$2999
CNL-2012 (12”)

• 30° angled head
• 5 Adjustments
• Fits filters up to 33/4”

$2999

Long Reach Flush Cutting
Pliers

Cuts plastic & 10-20 AWG copper
wire cleanly.

CNL-758 (71/2”)
$3499

28 Tool News | July-September 2021

Locking C-Clamps Locking PLIERS Hand Tools
w/Swivel Pads C-Clamps
PART SIZE PRICE PART SIZE PRICE 3pc Hose Grip Pliers Set
VSG-24SP 24” $57.99 VSG-24R 24” $54.99 • (1) 60775 11 in. Small Hose Grip Pliers
VSG-18SP 18” $44.99 VSG-18R 18” $44.99 • (1) 60777 11 in. Medium Hose Grip Pliers
VSG-11SP 11” $29.99 VSG-11R 11” $29.99 • (1) 60778 11 in. Large Hose Grip Pliers
VSG-9SP 9” $24.99 VSG-9R 9” $24.99 TIT-60776
VSG-6SP 6” $19.99 VSG-6R 6” $15.99 $2499 Also available individually for
5pc Locking Pliers Set Long Nose Locking
Pliers & Wire Cutter $999 each
Packaged in a Roll-up Canvas Bag VSG-9LN (9”)
Set includes 10” straight jaw, 10” $2499 3pc Long Nose Pliers Set
curved jaw, 7” curved jaw with wire VSG-6LN (6”) • (1) 60771 11 in. Straight Long Nose Pliers
cutter, 6” long nose pliers, and 5” $1999 • (1) 60773 11 In. 45° Long Nose Pliers
curved jaw locking pliers VSG-4LN (4”) • (1) 60774 11 In. 90° Long Nose Pliers
$1499 TIT-60770 Also available individually for
VSG-68 $2499 $999 each
$9999 Curved Jaw Locking
Pliers & Wire Cutter 3pc 16” Long Nose Pliers Set
Locking Chain Clamp VSG-10WR (10”) • (1) 60781 16 In. Straight Long Nose Pliers
$1999 • (1) 60782 16 In. 45° Long Nose Pliers
Overall Length of chain is 18” VSG-7WR (7”) • (1) 60783 16 In. 90° Long Nose Pliers
$1999 TIT-60787 Also available individually for
VSG-20R VSG-5WR (5”) $3499 $1299 each
$3499 $1999
VSG-4WR (4”) 11in Flat Nose 5pc Set
15” Extended $1399
Locking Pliers TIT-60779 Includes Pouch
TIT-60762 (Straight) Curved Jaw Locking Pliers • (1) 11 in. Straight Long Nose Pliers
TIT-60763 (45°) VSG-10CR (10”) 11in Diagonal Cutting • (1) 11 in. Flat Nose Pliers
TIT-60764 (90°) VSG-7CR (7”) • (1) 11 In. 45° Long Nose Pliers
$1699 $1799 TIT-60780 • (1) 11 In. 90° Long Nose Pliers
Your Choice • (1) Large Hose Grip Pliers
Heavy-Duty C-Clamps Straight Jaw $999
Locking Pliers TIT-60769
• Malleable steel w/ a durable VSG-10R (10”) $3999
black enamel finish VSG-7R (7”)
$1999 Precision Plier Set
• Chrome plated spindle & handle.
Large Jaw Set 7400 includes:
TIT-51573 (4”) Locking Plier • 7410 – 4” Diagonal pliers, thin
$999
TIT-51574 (5”) Great for “stuck” oil filters nose, semi flush
$1199 • 7420 – 4.5” Curved long nose
TIT-51575 (6”) VSG-12LC
$1499 $2499 pliers with serrated jaw
Pistol Grip Pliers • 7422 – 4.75” Duckbill style
8” Locking Sheet
Ergonomic Pistol Grip handles Metal Tool pliers with smooth jaw
provide greater gripping power while VSG-8R • 7418 - 5.75” Needle Nose
reducing hand fatigue $2499
pliers with smooth jaw
TIT-11400 (9”) 9” Locking Sheet • 7428 – 4.75” Long Nose Pliers
Metal Tool
• Crimper VSG-9R with cutter and standard jaw
$2499 • 7440 – 4.5” Long reach
$1199
angled pliers with flush cutter

SKT-7400
$11999◉

5pc General Purpose Pliers Set

Set includes:
Slip Joint Pliers - 7”
Tongue and Groove Pliers - 7”, 10”
Long Nose Pliers with Cutter - 8”
Heavy Duty Angled Diagonal Cutter - 7”

SKT-17835
$11999◉

Diagonal Cutting Pliers 6”& 8” Long Nose Pliers
IMP-03-MPD (5”) IMP-03-LN6 (6”)
$499 $499
IMP-03-DP8C (7.5”) IMP-03-LN8C-1 (8”)
$599 $599
6”& 8” Slip Joint Pliers
IMP-03-SJ6 (6”)
$499

IMP-03-SJ8 (8”)
$599
10” Groove Joint Plier
IMP-03-GJ10
$999

29Tool News | July-September 2021

Hand Tools KNIPEX PLIERS Cobra Pliers Set

Pliers Wrenches KNI-8603250SBA MAX W OAL Includes: 87 01 180 71/2”
• Lever transmission greater than 10 - 1 for $6499 87 01 250 10”
strong gripping power 2” 10” 87 01 300 12”

• Chrome vanadium electric steel, forged, KNI-8603300SBA 23/8” 12” KNI-002006US1
oil-hardened $8499 33/8” 16” $12499
MAX W OAL KNI-8603400US
KNI-8603125SBA $16999 Cable Shears
$5499 7/8” 5”
For cutting copper and aluminum cables
KNI-8603150SBA 1” 6” KNI-8643250SBA 13/4” 10” Cables up to 51/64” (20 mm) can be cut in one-hand operation
$5999 15° Angled
KNI-8603180SBA KNI-9511200SBA (8”)
$5999 13/8” 71/4” $7499 $6499
KNI-8601250SBA KNI-9511165SBA (6.5”)
Black Oxide Finish 2” 10” $3999
$6499 KNIPEX CoBolt® Compact Bolt Cutter

4” Long Knipex Cobra® Pliers Induction hardened edges cut hard, soft and piano wire
Cuts material like bolts, nails, rivets, etc. up to 5.2 mm dia.
• Optimum access in the narrowest spaces
• Gripping capacity of 1” KNI-7101200SBA (8”)
• Box joint: high quality and durability provided by dual guide $5999
• Fine adjustment with 11 adjustment positions KNI-7101250SBA (10”)
$7999
KNI-8700100SBA Extra Long Needle Nose Pliers

$3999 For gripping, adjustment and assembly work in hard to reach areas thanks
to slim, very long design
Cobra® Wrenches
KNI-2871280SBA (11”)
• Box-joint design: high stability because of double guide $4999
• Reliable catching of the hinge bolt: no unintentional shifting
• Chrome vanadium electric steel, forged, multi stage oil-hardened Long Nose Pliers

KNI-8701125SBA MAX W OAL KNI-8701300SBA MAX W OAL Induction hardened cutting edges for soft, medium, and hard wire.
$3499 $5499
1” 5” 2” 12” KNI-2611200SBA (8”)
$3499
KNI-8701150SBA 11/4” 6” KNI-8701400SBA 23/8” 16” Installation Pliers
$3499 $9999
KNI-8701180SBA 71/2” Features cable shears, stripping holes, and crimp die for end sleeves
$3999 11/2” 10” KNI-8701560US 33/8” 22”
$14999 KNI-13818SBA (8”)
KNI-8701250SBA $7499
$3999 2” Super Knips®

Raptor® Plier Precision pliers for ultra fine cutting work, e.g. in
electronics and fine mechanics
The Raptor Pliers combines the convenience of the comfortable
push-button adjustment on the workpiece and the function of an KNI-7861125SBA (5” )
all-purpose tightening tool. $3499
Wire Rope Shears
KNI-8741250SBA (10”)
$4499 Cutting edge hardness approx. 64 HRC
For wire rope with Ø 4.00 / 1960 Nmm²
High Leverage Diagonal Cutter
20% less force required compared to other diagonal cutters KNI-9562160SBA
$4999
KNI-7401200SBA (8”) KNI-7421250SBA Forged Wire Stripper
$3999 (10” Angled)
KNI-7401250SBA (10”) $4999 • Cuts 6-32 and 8-32 screws without threading and can be cut
from either the front or the back
$4999
• Strips 10 to 20 AWG – both solid and stranded
Ear Clamp Pliers • 8” Long
• High-grade special tool steel, forged, multi stage oil-hardened
For the simple and reliable mounting of 1-ear and 2-ear clamps
(Oetiker system or similar) KNI-13718SBA

KNI-1098i220 (83/4”) $5999
$2399
KNI-1099i220 (83/4” w/side jaw) Circlip Pliers 4pc Set
$2999
Includes:
Spring band Clamp Pliers Canvas Pouch
48 11 J1 For internal circlips in bore holes
Fitted with locking device. Can be used for standard, space-saving, spring 48 11 J2 For internal circlips in bore holes
wire hose clamps and for spring band clamps up to 70 mm nominal size. 49 11 A1 For external circlips on shafts
49 11 A2 For external circlips on shafts
KNI-8551180ASBA (7”)
$8499 KNI-001957
KNI-8551250AFSBA (10” locking) $11499
$12999

30 Tool News | July-September 2021

Snap Ring Pliers Sets Retaining Ring Pliers CNL-926 (6”) Individual Combination Hand Tools
AST-9401 (8pc) (5) pairs of color coded External: 1/8” to 1” Wrenches
interchangeable tips. Changes from Internal: 1/4” to 1”
• Removes internal and Internal to External w/ a switch of a tab. Your Choice Raised panel forged alloy steel
external snap rings. CNL-929 (10”) $2999
External: 11/2” to 4” Metric Sizes
• Includes 2 Hook & Picks Internal: 113/16” to 4” 6mm UP TO 25mm
Your Choice SAE Sizes
$3499 $5999 1/4” UP TO 21/2”
(A2SpTc-9L4a0rg2e) CNL-927 (8”) Spindle Snap Ring Pliers For
$4999 Ford Super Duty 15pc 12pt COMBINATION
External: 1/4” to 2” Wrench Sets
CRIMPRO™ Internal: 3/8” to 2” Used to Replace the Spindle Snap SKT-86255
Wire Crimping Tools Rings Found on 2007 and Newer Ford
Your Choice Super Duty Pickups. • Sizes: 1/4” to 1”
• 7” OAL $3499 LIS-38700
• Gripping nose - to pull, twist, 4pc Large Internal/ $27999
External Snap Ring $4999 SKT-86265
bend, and shape. Pliers Set
• Crimper & Stripper for 12-20 AWG 6pc Convertible Retaining • Sizes: 8-22mm
• Includes Internal and External Ring Pliers Set
insulated and non-insulated wire. straight and 90 degree bent pliers $24499
• Cutter below pivot point with a 0.90” tip size Tip Sizes: .038”, .047”, .070”, & .090”
• 3” long pliers, 0.09” (2.3mm) tip size 7pc JUMBO Wrench Sets
OTC-5950S 6pc
$2999 AST-94222 SKT-7600 • High density, dropped forged alloy steel.
• Includes Canvas Pouch
The angled feature allows Sizes 0° & 90°
access to close quarters and $5499 $14999◉ SUN-9707A(SAE)
facilitates superior crimps.
Adjustable Non-Marring Hose Clamp Pliers Set • Sizes: 1-5/16” to 2”
OTC-5950A (angled) Precision Panel Clip Pliers
$3999 • Includes Cross-Slotted Jaw Pliers and SUN-9707MA(MM)
Composite shoulder design a Wide, Flat-Band Hose Clamp Pliers.
Plastic Clip Removal Pliers prevents panel damage • Sizes: 33, 34, 36, 38, 41,
Adjustable jaw opening for multiple • The clamps are held open with a 46, & 50mm
For easy removal of plastic push pin clip sizes ratchet locking mechanism. Jaws
type panel fasteners with center pins. Precision ground for slim low profile swivel to access hose clamps in any $17999
Also works on traditional clips. engagement position. 6pc SAE JUMBO Wrench Set
Built-in cutter
AST-9581 OTC-4502 • Sizes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, & 2”
LIS-42810 $1499 $3399
$1999 IMP-01-WJ6
Mini Flush Cutters Hose Clamp Pliers 2pc Fuel Line Clamp Set $11499

Use to flush cut small gauge • Unique Jaw design fits clamps up to • Stop flow from vacuum, brake, and Combination Wrench Set
wire, cord, cable ties, & more 2” (51mm) fuel lines. IMP-01-W15MW
Heat treated blades
Contoured cushion grip handles • Extra-heavy duty 5/64” (2mm) cable • Pinch and hold hose w/out damage. • Sizes: 6-24mm
Overall length: 5 in. • Bi-material grips with snap feature
OTC-4506 $6499
TIT-12445 MAY-28680 $1199
$799 Jumbo Angle Head
MSRP $108.27 2pc Locking Hose Clamps Wrench Sets
Transmission Linkage
Bushing Installer $8499 Includes: • Polished w/15° & 60° angled ends
• MVA7605 = 6”, works up to 1” dia. • Includes Canvas Pouch
Easily and safely push tough • MVA7607 = 8”, works up to 1-¼” dia.
nylon bushings into place. Works • Equip w/ angled jaws for accessibility SUN-9916 (SAE 6pc)
on different bushing sizes. • Applies up to 50lbs of force.
$• S1i5ze9s9:91◉3/8" - 17/8"
IMC-909 MTY-MVA7609
$3999 $2999 (SMUeNt-r9ic962p6c)

4pc Snap Ring Plier Set Flexible Hose • Sizes: 20-25mm
IMP-03-SRP46 Clamp Pliers
$2299 $5999
• Precision clamp on end of flexible S(MUeNt-r9ic972p7c)
cable allows for extended reach,
in order to remove plastic and/or • Sizes: 26-32mm
metal self tightening hose clamps.
$9999◉
AST-9409A 14pc Angle Head Wrench Sets
$4999
• Includes Canvas Pouch
Safety Wire Twisting Plier Terminal Crimper for Multi-Cable Hose
Weather Pack & Metri Pack Clamp Pliers SUN-9914A
Automatic action twist safety wire to Terminals 12 - 22 AWG
remove slack. Prevents damage to Features 3 cables and 4 • Sizes: 3/8” to 11/4”
wire & prevents loosening. A MUST • Has 4 wire crimping and 2 seal different jaw types and sizes
for nuts and bolts in critical & high crimping positions for use on most automotive $9999
vibration areas. tension hose clamps SUN-9914MA
• Thin profile Easily switch out cable and
IMP-03-SWP9 • Steel construction jaw designs for different • Sizes: 6-19mm
$2799 • Comfortable cushion grips applications
Ratcheting PVC $8499
Pipe Cutter TOO-18915 AST-94093 6pc JUMBO Angle Head
TIT-15063 $3499 $6999 Open End Wrench Set
$1399 IMP-01-AWJ6

• Sizes: 13/8”-2”

$11499

31Tool News | July-September 2021

Hand Tools WRENCH SETS

Fully Polished Wrench Sets KTP-A1211MR Wrench Sets
KTP-A1209SR Metric 16pc-12pt
SAE 14pc-12pt All Wrench Sets packaged in either a
• Sizes: 8-32mm Plastic Case or Nylon Pouch.
• Sizes: 5/16”-11/4” MSRP $274.18
MSRP $237.62 Stubby
$13499 IMC-710 (10pc SAE)
$11999
• Sizes: 7/16” to 1”
KTP-A1203SR KTP-A1203MR
SAE 13pc Metric 13pc IMC-8910 (10pc Metric)

• Sizes: 1/4” - 1” • Sizes: 8-24mm • Sizes: 10mm to 19mm
MSRP $164.15 MSRP $139.22 MSRP $46.33

$7999 $6999 $3499

KT Pro provides professional grade hand Super Thin Wrenches
tools that meet and exceed ANSI and DIN IMC-8109 (9pc Metric)

specifications • Sizes: 8-32mm

$3999
IMC-8308

(8pc SAE)
• Sizes: 3/8” to 15/16”

$5499

5pc Half Moon Wrench Sets 5pc SAE Flare Nut Wrench Sets
• Fully polished drop forged alloy steel
• Includes Canvas pouch • Sizes: 1/4” x 5/16” - 3/4” x 7/8”
SUN-9935 SUN-9935M
• Sizes: 5/16” to 7/8” • Sizes: 8-22mm SKT-381
$3499 $3999 SKT-386 (15° Offset)
$9999◉

Service Wrenches Angle Head Wrenches 14 Piece Wrench Sets Jumbo Combination
IMC-9215 (15pc SAE) IMC-9810 IMC-816 • Raised panel design Wrenches
• Sizes: 3/4” to 15/8” (10pc SAE) (16pc Metric) • Includes Canvas pouch
Carbon Steel Construction
IMC-9515 (15pc Metric) • Sizes: 1-5/16” to 2” • Sizes: 8-23mm SUN-9714A
• Sizes: 20-30mm & 34-36mm • 15° and 60° • Sizes: 3/8” to 11/4” TIT-17289 7pc Metric
$9999
$15999 $28999◉ $6999 Sizes included: 34, 36, 38, 41, 42,
SUN-9715A 46, and 50 mm
• Sizes: 6mm to 19mm
$5999 $11499◉
TIT-17290 6pc SAE

Sizes included: 1-3/8, 1-1/2,
1-5/8, 1-3/4, 1-7/8 and 2 inch

$9999◉

X-Frame 6pt Ratcheting Wrenches 7pc SAE Set Crowsfoot Wrench Set
3/8” Drive
• I-Beam handle distributes added force evenly • Sizes 3/8” - 3/4” IMC-7412 (12pc)
for superior strength.
SKT-80049 • Sizes: 8-19mm
• Dual-opposing pawls work in tandem to provide $14999◉
added strength. IMC-7711 (11pc)

• 1.7° Arc Swing provides 216 ratcheting positions! • Sizes: 3/8” - 1”
MSRP $55.26
12pc Metric Set
$4499
• Sizes 8-19mm

SKT-80019
$27999◉

CROWSFOOT SETS SAE Crowsfoot Sets Metric Crowsfoot Sets

1/2” Drive • Fully polished drop forged alloy steel • Fully polished drop forged alloy steel
IMC-7814 (14pc) • Reusable blow mold storage tray • Mounted on a convenient storage rail

• Sizes: 11/16” - 2” SUN-9720A SUN-9730A

$12499 • Sizes: 1” - 13/8” • Sizes: 24-30mm & 32mm
IMC-7917 (17pc)
$7999 $6999
• Sizes: 20-46 mm SUN-9722A SUN-9740A (Jumbo)

$13999 (Jumbo) • Sizes:34-36, 38, 41, 42,
Flare Nut Crowsfoot Sets • Sizes: 15/8” - 21/4” 46mm

• Fully polished drop forged alloy steel $11999 $9999
• Mounted on a convenient storage rail
14 Piece 1/2 in. Drive SAE Jumbo
SUN-9708 (8pc) Crowsfoot Wrench Set

• Sizes: 3/8” to 7/8” • For use in confined areas or applications where
challenging angles are present
$3499
SUN-9710M (10pc) • Stamped sizes in each wrench for quick identification
• Constructed from hardened and forged steel
• Sizes: 10-19mm • Includes storage case

$3999 TIT-17298 SAE

32 Tool News | July-September 2021 1-1/16 inch to 2 inch

TIT-17299 Metric

27mm to 50mm

$9999

Super Thin Adjustable Adjustable Wrenches MISC WRENCHES Hand Tools
Wrench
IMP-02-AW6 (6”) $799
• Drop Forged Alloy Steel
• Jaw and Handle thickness = .36” IMP-02-AW8 (8”) $899 Large Diameter Strap Flex-Head O2
• Jaw A = 9/16” - 1-9/16” Wrenches Sensor Wrench
• Jaw B = 1-1/16” - 2-1/16” IMP-02-AW10 (10”) $1199
• Non-Marring nylon belt • Designed for all oxygen sensors
IMC-629 IMP-02-AW12 (12”) $1799 prevents scratching and with 7/8”. hex
$3499 damage to finished surfaces
IMP-02-AW15 (15”) $2299 • Essential clearance for removal/
Extra Slim Jaw Adjustable TIT-21315 (12in) installation of oxygen sensors when
Wrenches IMP-02-AW18 (18”) $3399 it is positioned upward and inward
• Strap Length: 34in to the floor-board or when leverage
Designed to reach nuts and fasteners IMP-02-AW24 (24”) $5999 • Pipe Capacity: 2in is needed around an exhaust pipe
in tight spots with little clearance that • Tube Capacity: 9i
regular wrenches can’t reach. PIPE CAL-843
WRENCHES $1999 $2999
CNL-804S (4”)
$2499 Steel TIT-21316 (18in) Variable Pin Spanner
CNL-806SW (6”) TIT-21308 (8”) Wrench
$2999 $699 • Strap Length: 32.75in
TIT-21310 (10”) • Pipe Capacity: 5in • Universal Design, adjustable from
Wide Jaw Adjustable $999 • Tube Capacity: 8in 1-1/4”- 5”.
Wrenches TIT-21312 (12”)
$1499 $5999 • Works w/ a 1/2” drive ratchet or
• 50% wider & 30% more depth than TIT-21314 (14”) LIS-28500 breaker bar.
average adjustable wrenches. $1999
TIT-21318 (18”) • Ranges from 1”-65/8” • Comes w/ 3.5mm, 4mm, 4.5mm,
SUN-9611 (6”) $2499 5mm, 6mm, 7mm, & 10mm pins.
TIT-21324 (24”) $2499
• 34mm Max Jaw Opening $3499 OTC-6613
TIT-21336 (36”) $9499
$2699 $5999
SUN-9612 (8”) TIT-21337 (48”) LIS-60200 Spud Ratchets
$8999
• 38mm Max Jaw Opening Aluminum • Use with a 1/2” Drive Tool. 72 Tooth reversible ratchet
TIT-21334 (14”) • Removes and installs objects up 5 degrees of sweep for
$3499 $2499 working in confined areas
SUN-9613 (10”) TIT-21338 (18”) to 6-1/2” O.D. Black Oxide finish
$3499
• 50mm Max Jaw Opening TIT-21344 (24”) $2499 TIT-11077 3/8in. Drive,
$4999
$4999 TIT-21346 (36”) 10in. Long
SUN-9614 (12”) $9499
TIT-21348 (48”) TIT-11078 1/2in. Drive,
• 60mm Max Jaw Opening $16499
12in. Long
$5999 4pc Steel Pipe Wrench Set
$2499
Ratcheting Chain Wrenches • Includes sizes: 8, 10, 14 and 24 inch
OTC-6968 (12” Handle) • Durable enamel finish with precision Extendable
Ratchet Set
Grip Range 1/2” 4-1/2” OD milled, drop forged steel jaws and Adjustable Gland Nut • Plastic over-molded handle
I-beam handle design Wrenches • Includes 1/4”, 3/8” & 1/2”
$4499 • Heavy-duty ductile iron housing CTA-8600 • 72-tooth design
OTC-6969 (24” Handle) • Limited Lifetime Warranty
TIT-21304
Grip Range 3”-6-1/2” $6999

$8999

TIT-21370 (12” Handle) • Fits hydraulic cylinders on vehicles EZR-MR482
from 1” to 3-3/4” / 25mm to 95mm
• Chain Length: 17” • Reverses to work on 1/4” or 7/32” MSRP $101.99
• Grip Range: 2-4” O.D. 8pc Miniature pin-holes $8499
Ignition Wrench Set • 1/2” drive
$3499 $3499
TIT-21372 (24” Handle) 15° x 60°

• Chain Length: 21.65” SAE - 13/64” to 3/8”
• Grip Range: 2-6.5” VIM-V18
$2999
$5499
CTA-8605
Metric - 4mm-9mm Thumbwheel Ratchets
VIM-VM50 • Fits hydraulic cylinders on vehicles
$3499 from 2” to 6” / 51mm to 152mm. Great for Tight Spots

Adjustable Spud Wrenches • Reverses to work on 17/64” or SKT-49270 (1/4”)
21/64” pinholes. SKT-45172 (3/8”)
• Chrome Vanadium construction $3999
• Black oxide finish resists corrosion • 3/4” drive.

$5499

TIT-216 (16in) TIT-223 (3pc Set)
$3499
• 8in, 10in & 12in

$5499

33Tool News | July-September 2021

Hand Tools IMPACT ACCESSORIES

17 Piece Impact Adapter Set 7pc Impact Adapter and 8pc Impact Adapter Set 6pc 3/8” Dr Accessory Set
U-Joint Set TIT-48100
• Master Impact Extension set that includes 1/4”, • Includes: 1”F x 3/4”M, 3/4”F x 1/2”M, 1/2”F
3/8”, 1/2” adapters complete with universal Set Includes: x 3/8”M, 3/8”F x 1/4”M, 1/4”F x 3/8”M, • (1) Universal Joint
(4) Impact Adapters: 1/4” F x 3/8” M, 3/8” F 3/8”F x 1/2”M, 1/2”F x 3/4”M, 3/4”F x 1”M • (1) 3/8” F x 1/4” M Reducer
TjIoTin-t8a1nd4e8x3tensions x 1/4” M, 3/8” F x 1/2” M and 1/2” F x 3/8” M • (1) 3/8” F x 1/2” M Adapter
(3) Pin Free Locking U-Joints: 1/4” F x 1/4”, • Comes in a sturdy blow-molded case • (3) Extensions: 1-3/4, 3 and 6”
$6499 3/8” F x 3/8” M and 1/2” F x 1/2” M
TIT-40000 $2499
TIT-40167 $6999
$4499

3pc Universal Joint Impact 3/8” Sq. Dr. to 1/4” Hex Dr. 1/2” Sq. Dr. to 1/4” Hex Dr. Universal Power 1/4” Hex
Socket Set Quick Change Impact Quick Change Impact Driver
Adapter Adapter
• Includes 1/4”, 3/8”, & 1/2” TIT-12034 TIT-12039 1/4” Square Drive
$999 $1199 1/4” Locking Hex Bit Holder
TIT-40160 Pull Back Locking Collar To
$2999 Release Bits

VIM-UPH4
$1299

3pc Impact Socket 3 pc. Impact Stubby 3pc Low Profile Adapter Set
Adapter Sets Socket Adapter Set
Includes: 1/4”, 3/8”, 1/2” Dr
• Includes: 1/4”, 3/8” & 1/2” adapters • Includes: 1/4”, 3/8”, 1/2” Dr
• Detent ball for secure socket retention TIT-30936
TIT-12061 $999
TIT-12082 (23/4” OAL) $699
$499

1/4”, 3/8”, 1/2” Impact Adapters TIT-12086 (6” OAL) TIT-49006
TIT-15210 (3” OAL) TIT-49003 $999 TIT-15206 (12” OAL)
• 1/4” Shank (6” wobble) $1999
(23/4” wobble)
$1999 $1499
$699

12pc TORX Impact 1/2” Dr Hex Bit 3/4” 5 Piece Hex Bit Impact Sets
Socket Set Impact Sets SUN-4506 (SAE
SUN-2638 (SAE)
Includes: SAE: 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
• 1/4” Drive: T10, T15, T20, T25, T27, T30 • Sizes: 1/4”, 9/32”, 5/16”,
• 3/8” Drive: T40, T45, T47, T50, T55 3/8”, 7/16”, 1/2”, 9/16”, SUN-4507 (MM)
• 1/2” Drive: T60 5/8”, 11/16” and 3/4”
Metric: 14, 17, 19, 22, 24 mm
SUN-1820S SUN-2639 (MM)
$9999
MSRP $59.62 • Sizes: 6, 7, 8, 10, 12, 14,
15, 17, 18, & 19mm
$4499 - Your Choice

$8499

Stubby Torx & Hex NANO Impact Socket Sets 3/8”Dr Nano Pinless Universal
Impact Socket Sets Impact Sockets
AST-94410T(10pc TORX) • At 1.10” (28mm) long, sockets are 37% shorter
than shallow impact sockets and 15% shorter • Astro’s Nano form factor, up to 11% shorter than
• 3/8” Dr.; T25 - T70 than other stubby impact sockets. standard low-profile universal impact sockets

$3999 • All sockets feature a 22mm (7/8”) outside hex • Forged CRO-MO with lifetime warranty
AST-94418H (18pc HEX) for increased access when used with a wrench. • Standard: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”

• 3/8” Dr.; 6 - 19mm; 1/4” - 3/4” AST-78310 (3/8” AST-78314 (3/8” and 3/4”

$4999 Dr., 10pc SAE) Dr., 14pc Metric) AST-78340
• 1/4” through 3/4” • 6mm through 19mm $6499

$2999 $3499 • Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18 and
19mm
AST-78211 AST-78215 (1/2”
AST-78344
(1/2” Dr., 11pc SAE) Dr., 15pc Metric) $7999
• 3/8” through 1” • 10mm through 24mm

$3999 $4999

34 Tool News | July-September 2021

IMPACT SOCKETS Individual Sockets Hand Tools

Complete your set or add to it with
individual sockets in many sizes and styles!

Available in SK, Sunex,
and KT PRO

SKT-4519 SKT-4062

SKT-46164 SKT-33351 SUN-2651 SUN-3500
SKT-4090 SUN-4684 SUN-3580
SKT-33300

SKT-4047 SKT-4039 SUN-2668 SUN-3329 SUN-2858
SKT-34350 SKT-4051
SKT-4070
SUN-5692 SUN-2569

PART DESCRIPTION PRICE PART DESCRIPTION PRICE
SKT-45674 3/8" 3pc Extension Set $54.99 SUN-3500 3/8" 4pc Extension Set $59.99
SKT-46164 1/2" 4pc Extension Set $79.99 SUN-2500 1/2" 4pc Extension Set $79.99
SKT-4519 6pc U-Joint Adapter Set $179.99 SUN-3361 3/8" 12pc DEEP (5/16"-1") $64.99
SKT-4090 3/8" 40pc MASTER Set $269.99◉ SUN-3325 3/8" 25pc Std/Deep (5/16-1") $134.99
SKT-4062 $94.99 SUN-3329 3/8" 29pc Std/Deep (8-22MM) $134.99
SKT-4082 3/8" 12pc (8-19MM) $114.99 SUN-3580 3/8" 80pc MASTER Set $294.99◉
SKT-33300 3/8" 12pc Deep (8-19MM) $179.99◉ SUN-2858 1/2" 13pc 8pt Deep (3/8-1-1/8") $159.99
SKT-33329 3/8" 8pc Swivel (5/16-3/4") $214.99 SUN-2650 1/2" 13pc (7/16-11/4") $49.99
SKT-33351 3/8" 7pc Deep Swivel (3/8-3/4") $199.99◉ SUN-2651 1/2" 13pc DEEP (7/16-11/4") $89.99
SKT-33375 3/8" 10pc Swivel (10-19mm) $269.99◉ SUN-2652 1/2" 14pc (10-27MM) $49.99
SKT-4037 3/8" 10pc Deep Swivel (10-19mm) $239.99◉ SUN-2653 1/2" 14pc Deep (10-27MM) $89.99
SKT-4047 $424.99◉ SUN-2668 1/2" 39pc MASTER SAE $259.99
SKT-4039 1/2" 25pc (8-36mm) $229.99◉ SUN-2669 1/2" 39pc MASTER Metric $199.99
SKT-4049 1/2" 25pc Deep (8-36mm) $314.99◉ SUN-4683 $399.99◉
SKT-34300 $379.99◉ SUN-4684 3/4" 17pc (1-2") $299.99◉
SKT-34350 1/2" 19pc (3/8-11/2") $399.99◉ SUN-5692 3/4" 17pc (26-46mm) $399.99◉
SKT-4051 1/2" 19pc Deep (3/8-11/2") $299.99◉ SUN-2568 $279.99◉
SKT-4053 1/2" 13pc Swivel (1/2-11/4") $279.99◉ SUN-2569 1" 21pc (3/4-2") $214.99◉
1/2" 15pc Swivel (10-24mm) 1/2" 43pc MASTER (3/8-11/2")
SKT-4070 1/2" 28pc Std/Deep (3/8-11/4") $84.99 1/2" 43pc MASTER (9-30mm)
1/2" 30pc Std/Deep (8-24mm)
SKT-4072 1/2" 7pc Deep Flex-Zone $134.99

(3/8-3/4")
1/2" 10pc Deep Flex-Zone

(10-19mm)

35Tool News | July-September 2021

Hand Tools RATCHETS / SOCKETS Extendable Quick TIT-12072 (3/4”)
Release Ratchets
Premium Reversible • Telescopes in 5 Increments 19-1/2” to 30-1/2”
Ratchets • Push Button, Quick-Release Head
TIT-12070 (3/8”) TIT-12074 (1/2”) $9999◉
8-1/2” to 12-1/2” 12” to 17-1/2” TIT-12073 (1/2”)
$2499 $3499
18” to 24”

$3999

PART DESCRIPTION PRICE

SKT-40970 1/4” Dr. 4.5” Long $54.99 Nano Ratchets by Astro

SKT-40971 1/4” Dr. 6.5” Long $64.99 • The Nano ratchet heads are 50% the size of Standard 1/2”
the most popular competition ratchets of the Nano 1/2”
SKT-45170 3/8” Dr. 7.6” Long $69.99 same drive Standard 3/8”

SKT-42470 1/2” Dr. 10.3” Long $89.99 • 72 tooth, quick-release socket retention, solid
teardrop handle, full chrome polish finish
SKT-42472 1/2” Dr. 17.6” Long Flex $124.99 • Exceeds ASME torque standards despite its
miniature size
SKT-47170 3/4” Dr. 18” Long $199.99
AST-93808 (3/8” Drive 8” Long) Size Comparison
Premium Ratchets Extendable Monster $1999 AST-91210
• Features: 90 teeth, anodized aluminum Ratchets
handles, Swivel Ratchets feature a quick- AST-93812 (3/8” Drive 12” Long) (1/2” Drive 10” Long)
• Extends from 24” to 40” $2499 $2499
release. • Knurled handle for superior grip
TIT-12161 TIT-12162 • 24-tooth design
3/8” Dr x 12in 1/2” Dr x 16in • Limited Lifetime Warranty
$3499 $4999
EZR-MR34 (3/4” Dr)

*Replacement Head: RK34 1/4” Dr 4” Long Micro 12pc Aluminum Colors Display
Swivel Ratchets TIT-11314
$13499 • Micro reversible ratchet $21999
• 90 Tooth
LP90™ Series Ratchets 1/2” SKT-80220 • Unique swivel head design Also Available
$11999 Individually (Not Carded)
Innovative 90 tooth ratchet mechanism 15” Flex|SKT-80300 allows for use in confined areas TIT-11314-BL (Blue)
• Low profile and 4˚ arc swing for ultimate $15999 TIT-11314-GR (Green)
24” Long|SKT-80222 Black Alloy Steel TIT-11314-OR (Orange)
access in the tightest spaces $17999 TIT-11313 (Carded) TIT-11314-RD (Red)
24” Flex|SKT-80310 $1499
SKT-80180 $17999 $1999
Blue Anodized
1/4” $6999 Aluminum
Flex|SKT-80280 TIT-11316 (Carded)
$8999 $1999

SKT-80200 62 Piece 3/8” and 1/4” Drive Standard
$8999 and Deep Metric Chrome Socket Set

3/8” 11” Flex|SKT-80290 • 4-15mm 1/4” Dr Sockets
$11999 • 6-22mm 3/8” Dr Sockets
15" Long|SKT-80203 • Includes ratchets, extensions, and adapters
$12499
SKT-94562
Complete Mechanics Tool $34999◉
Sets by:
60pc 1/4” Dr. SAE & Metric Set
94pc SET
• Ratchet, (2) Extensions {2” & 6” }, Universal Joint,
Includes: 3/8” 45 tooth ratchet, & (2) Adapters
(16)1/4” sockets, (11)3/8” sockets, • (15) 6pt. Shallow: 4mm - 16mm
3” extension, Reducing adapter, • (13) 6pt. Shallow: 1/8” - 5/8”
Magnetic bit driver, (40) Bits (18) • (14) 6pt. Deep: 4mm - 15mm 1/4” Dr. SAE & Metric Socket Set
Hex keys &Storage Case. • (12) 6pt. Deep: 1/8” - 9/16” SKT-91848 (48pc 6pt)

CNL-39070 SKT-91860 • Includes: 4.5” Ratchet, (2) Adapters - 1/4”F
$6999 x 3/8”M & 3/8”F x 1/4”M, Thumb-wheel,
132pc SET MSRP $494.02 Universal, & (2) Extensions - 2” & 6”

Includes: 3/8” 45 tooth ratchet, $35999◉ • Shallow: 3/16” to 9/16”; 4mm to 15mm
(20)1/4” sockets, (21)3/8” • Deep: 1/4” to 9/16”; 6mm to 15mm
sockets, (2)Spark plug sockets,
3” & 6” extensions, Reducing 47pc 3/8” Dr. SAE & MSRP $341.04
adapter, Magnetic bit driver, (50) Metric Socket Sets
bits , (18)hex keys, (10) combo $26999
wrenches & Storage Case.
• Includes: 7.5” Ratchet, (2)
CNL-39067 Extensions - 3” & 6”, 3/8”M
$11999 Thumbwheel, & Universal
• Shallow: 1/4” to 7/8” & 6 to 19mm
171pc SET • Deep: 3/8” to 7/8” & 10 to 19mm

Includes: 1/4” & 3/8” & 1/2” 45 tooth SKT-94547 (6pt) SKT-94549 (49pc, 6pt)
ratchets, (20)1/4” sockets (35) SKT-94547-12 (12pt)
Standard & deep 3/8” sockets, - Your Choice Includes 1.5” Thumbwheel
(12)1/2” sockets, (2) Spark plug $29999 Ratchet & Universal Joint
sockets, 3” extension, Magnetic
bit driver,(60)bits, (18)hex keys, $31499
(12) combo wrenches, Magnetic
parts tray & Storage Case. 47pc 1/2” Dr. SAE & SKT-4147 (12pt)
Metric Socket Sets SKT-4147-6 (6pt)
CNL-39053
$18999 • Includes: 10.3” Ratchet MSRP $705.79
& (2) Extensions - 2” & 5” Your Choice

• Shallow: 1/2” to 1-1/8” & $51499
10 to 24mm

• Deep: 1/2” to 15/18” &
10 to 19mm

36 Tool News | July-September 2021

44pc 1/4” Dr. SAE & 47pc 3/8” Dr. SAE & 47pc 1/2” Dr. SAE & Metric Hand Tools
Metric Socket Set Metric Socket Sets Socket Sets

• Includes: 5.5” Ratchet & • Includes: 8” Ratchet & • Includes: 10” Ratchet &
(2) Extensions - 2” & 6” (2) Extensions - 3” & 6” (2) Extensions - 2” & 5”

• Shallow: 3/16” to 9/16”; 4mm to15mm • Shallow: 1/4” to 7/8” & 6 to 19mm • Shallow: 1/2” to 1-1/8” & 10 to 24mm
• Deep: 1/4” to 9/16”; 6mm to 15mm • Deep: 3/8” to 7/8” & 10 to 19mm • Deep: 1/2” to 15/16” & 10 to 19mm

KTP-A2505CR KTP-A3505CR KTP-A4505CR
KTP-A3005CR (12pt) KTP-A4005CR (12pt)
MSRP $70.59
MSRP $124.90 MSRP $179.71
$5999
$9999 $14999

1/4” Drive Bit Ratchet with 32 Piece KT Pro provides professional grade hand tools that
Hex Bit Set meet and exceed ANSI and DIN specifications

• Set includes: Bit Ratchet - 4.5” overall length, 120 VW & Audi Head 9pc XZN Triple
positions Bolt Tool Square Sockets

• Phillips: #1 (Qty 2), #2 (Qty 3) and #3 (Qty 1) • 6-point bit for R&R on • 1/4” dr, 4 & 5mm
• Torx: T10, T15, T20, T25,T27, T30, and T40 cylinder head bolts. • 3/8” dr, 6, 8, & 10mm
• SAE Hex: 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, and 3/16” • 1/2” dr, 12, 14, 16, &18mm
• Square: #1, #2, and #3 • 10mm polydrive
• Slotted: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, and 9/32” TIT-16138 (Stubby Impact)
• Combo Head: #2 VIM-V3452 Your Choice
• Socket Adapter: 1/4” $999 $2999
• Clutch: 5/32” and 3/16”
50pc Torsion Triple Square
SKT-82102 Impact Bit Set Socket Sets
VIM-XZN100 (8pc)
$8999 • Includes: Phillips,
Slotted, Square, Torx, • 3/8” Drive Stubby
13pc Torx Plus 4pc 1/2” Dr. Square Drain Hex, Adapters & Chucks • 4mm-16mm.
• 1/4” & 3/8” Dr. Bit Holders Plug Socket Set
• TP8 to TP55 TIT-16251 $3999
4pc 1/2” Dr $6499
TIT-16036 • Male Sq. 8mm,10mm, & 1/2” 3pc. Auto Flex Universal Joint
$1299 • Female Sq: 10mm
• Set Includes: (1) 1/4 in. Dr. ,(1) 3/8 in.
IMC-3304 Dr. ,(1) 1/2 in. Dr.
$1999
• Made with Chrome Vanadium Steel

TIT-85505
$2499

148pc Master Bit Set 33 pc. Multi-Bit Precision Ultra Access 16pc Socket & Ratchet Set Nut Setter Sets
Screwdriver Set VIM-NS100 (SAE)
Assortment of the most popular, Uni-Fit® Universal Drive:
& hard to find bits, plus a 1/4” drive Soft comfort grip handle extends from 13 Sockets = over 47 Fasteners! • Sizes: 1/4” to 9/16”
socket adapter & 3-1/2” Magnetic 4-13/16 in. to 7-1/4 in. (122 mm to 184 mm) • (13) Uni-Fit Pass-Thru Sockets
Quick-release bit holder. 7.9 in. (200 mm) Flexible extension • Sizes: 8-22mm & 5/16”-7/8” VIM-NSM100 (Metric)
Mini magnifier • (1) Pass-Thru Reversible Ratchet
TIT-16148 Chrome molybdenum steel construction • Low-profile & offset handle • Sizes: 8-14mm
$4999 • (1) 3” Pass-Thru Socket Extension
TIT-16093 • (1) 3/8” Dr. Quick Release Ratchet $3999
$1499
Adapter

CNL-39100

MSRP $60.37

$4999

26pc Ratcheting Precision Deep External Star Sizes include: 8pc External TORX Plus Socket Set
Screwdriver Set Socket Sets 3/8 in Dr: E11, E12, E14, E16
1/2 in Dr: E18, E20, E22, E24 • Black manganese phosphate finish offers
• For use with a wide range of projects For servicing inverted superior protection and corrosion resistance
including automotive, engineering, & E-series fasteners TIT-68302 compared to black oxide
electronic applications. Sizes include: $1999
1/4in. Dr: E4, E5, E6, E7, • Laser-etched markings are easy to read
TIT-16092 E8, E10, E11 • Includes socket storage rail
$999 • Impact grade
TIT-66320 Sizes include:
$1199 • (3) 1/4 in Dr: EP6, EP7, EP8
• (4) 3/8 in Dr: EP10, EP12, EP14, EP16
• (1) 1/2 in Dr: EP18

TIT-17418
$2499

26pc Precision Bit & 100pc Security Bit Set 36pc S2 Steel Bit Set 11pc Offset Bit Driver Set
Driver Set w/Micro Ratchet
• Essential for car, machine L-shape driver handle provides
• Set Includes: (4) Phillips, tool, household appliances, • 72 tooth design, exceeds ANSI straight and 90 degree driving
(2) Pentalobe,(5) Slotted, (7) Hex, and electronics repairs. specs (14) Torx (1 ea. Tamper Phillips: PH1, PH2, & PH3
(6) STAR, plus (1) Magnetic bit Proof & Standard) T10 - T40 Slotted: 1/8, 5/32, & 3/16 inch
holder, & (1) Aluminum Bit Driver • Chrome vanadium adapters Hex: 3 & 4 mm
w/ satin finish • (6) Hex: 5/64” -1/4” Star: T15 & T20
TIT-16028 • (6) PH: 1(2pc), 2 (2pc), 3 (2pc)
$2499 AST-9448 • (6) PZ: 1(2pc), 2 (2pc), 3 (2pc) TIT-16091
$1999 • (4) SL: 1/8”-1/4” $1499

SUN-9726
$3999

37Tool News | July-September 2021

Hand Tools 1/4” Hex Bit Sets SKT-19731 Ball-End Long Multi-Drive 12pc Torx-PLUS Set
SKT-19732 SKT-19748
10pc: 1/16” to 1/4” • 1/4”: T8, T10, T15, T20, T25, T27, & T30
6pc: 2mm to 5mm 8pc: 3mm to 10mm • 3/8”: T40, T45, T50, & T55
$9999◉ • 1/2”: T60
$5999◉ $14999◉
SKT-19751 SKT-84232
$16499◉
7pc: 1/8” to 3/8”

$11499◉

29pc Master Hex Socket 14pc 6” Hex Driver Sets 23pc Metric Hex Set
Set
VIM-HXLM100 (Metric) • 2mm - 22mm,
Sizes: 2mm to 19mm & 3/32 to 3/4 • (7) hex & (7) ball-hex: 3-10mm • Bits are made from S2 Steel, The
VIM-HXL100 (SAE)
VIM-HMS26 • (7) hex & (7) ball-hex: 1/8”-3/8” Strongest Steel Available.
$9999 Your Choice • Satin Chrome finish
• 1/4”, 3/8” and 1/2” Square Drives
$7999
VIM-MMS23

MSRP $151.49

$9999

Torx Socket Sets 18pc Long 5pc MorTorq Super Socket Set 53pc MASTER
• 9pc 4.5” Long T10 thru T50, TORX® SOCKET SET
10pc Stubby Sizes: M0, M1, M2, M3, M4, all 3/8” square drive,
• 1/4” Drive Sizes: T10 - T50 9pc 8” long T10 thru T50, black all packed on socket rail • Updated set includes external Torx PLUS
bits and chrome holders. Services new fasteners found on many GM, 1/2” Sq Dr EP24 for 2017+ Ford Pickup Beds
VIM-HCT1050 Chrysler, BMW, Nissan, Honda & Fiat.
$3999 VIM-V458L-SET • Includes Torx, Torx-Tamper-Resistant, &
$9999 CTA-8140 Torx-Plus Bits (14pc each): 1/4” dr T6-T30;
$3499 3/8” dr T40-T55; & 1/2” dr T60

• Plus Torx External Sockets (12pc) : 1/4” dr
E4-E8; 3/8” dr E10-E20; & 1/2” dr E22-E24.

OTC-5900APLUS
$11999

SureGrip® 26pc Screwdriver Set
Screwdriver Sets • (7) Slotted
• (5) Star
• Comfortable square handle, for secure grip even w/ greasy hands. • (9) Phillips
• Nickel-chrome plated for corrosion protection • (3) Square
• Straight Pick
6pc Combo
SKT-86320 • Offset Pick
• Plastic rack + clamshell
$6499
5pc Long Reach TIT-17203
SKT-86321 $4499

$6999 SCREWDRIVERS

9pc Combo
SKT-86006
$13999
6pc Heavy Duty 6pc Screwdriver Set
Screwdriver Set • (4) Slotted: 3/16” x 3”, 3/16” x
4”, 1/4” x 4”, 1/4” x 6”
• (3) Slotted: 7/32” x
4”, 1/4” x 6”, 5/16” x 7” • (2) Phillips: No.1 x 3/16” x 3-1/8”
• No.2 x1 /4” x 4”
• (3) Phillips: No.1 x 3”,
No.2 x 4”, No.3 x 6” KTP-31216MR
Screwdriver Sets 22pc Screwdriver Set $1999
6-in-1 Screwdriver KTP-30206MR
Assorted slot and Phillips screwdriver, $3499
Slot, phillips, and nutdriver Torx screwdrivers, scratch awl, screw
starter, stubby screwdrivers and tack
IMP-18-SD6N2 puller; all w/ neon handles
$799
IMP-18-SD22M
$2299

9pc Screwdriver Set KT Pro provides professional grade hand
tools that meet and exceed ANSI and DIN
Assorted slot & phillips screwdrivers
specifications
IMP-18-SD8N
$1299 7pc Insulated
Screwdriver Set
7 Piece Nutdriver Sets
IMP-18-ND7 (SAE) • (4) Slotted: 3/16” x 4”, 7/32” x 5”,
1/4” x 6”, 5/16” x 8”
+3/16”-1/2”
• (3) Phillips: No.1 x 3/16” x 4”,
IMP-18-ND7M (MM) • No.2 x1 /4” x 4”, No.3 x 5/16” x 6”

+5mm - 12mm KTP-30617MR

$1199 MSRP $58.71

$2999

38 Tool News | July-September 2021

HEX KEYS — Hand Tools
ALLEN WRENCHES

Bit Socket Sets 13pc SAE Hex Bit 13pc Metric Hex Bit
Socket Set Socket Set
• Anodized magnetic aluminum rail TIT-16123 TIT-16124
• S2 alloy steel bits for strength and + 113///428”””DDDrrr...---2161,,2&7.,518,2,3m9,m,41,05m,5m.5mm
+++57//61311//64/428””””,”,DD3D1//rr88r...””---,5793////16616644””””&,,,5731////3332222””””,, 1/4”, +
durability +
$3999
13pc Star Bit Socket Set $3999
TIT-16122

+ 1/4” Dr. - T10, T15,T20, T25, T27
+ 3/8” Dr. - T40, T45, T47, T50
+ 1/2” Dr. - T60 & T70

$3999

Comfort Grip T-Handle TIT-12769 (6pc Metric) Extra Long Arm
Hex Key Sets L-Key Sets
TIT-12768 (8pc SAE) • Set Includes: 2, 2.5, 3, 4, 5, & 6mm • Extra long design for more torque
• Ball tips on long arm
• Set Includes: 3/32”, 7/64”, 1/8”, $1299
9/64”, 5/32”, 3/16”, 7/32”, & 1/4”
• Textured finish for better grip
$1499 TIT-12713 (13pc SAE)

+ 0.05”,1/16”-3/8”
$2499
TIT-12714 TIT-12715

(9pc Metric) (13pc Metric)
+ 1.5-10mm + T6-T50
$1999 $2999

39pc Long Arm Allen 25pc Hex Key Set Combo MM/SAE
Wrench Set L-Key Sets
• SAE Sizes: 1/16”-3/8”
• Features a 3-way storage holder. • METRIC Sizes: 1.27-10 mm Packaged in Plastic Molded Holders
• (12) SAE - 1/16” to 3/8” • Heat treated carbon steel
• (13) Metric- 1.27mm to 10mm EKL-10222
• (14) Torx - T6 to T55 w/ black oxide finish.
22pc Long Series Set
TIT-12739 TIT-12712
$2499 $999 $2499
EKL-13222

22pc Ball End Series Set

$1999

DOUBLE Ball-End L-KEY L-Key Sets Metric 7pc TORX L-Key Sets
Set EKL-10509
Packaged in Plastic Molded Holders Packaged in Plastic Molders Holder
Packaged in Plastic Molded Holders Short Series Sizes: T10 to T40
• Eklind® Ball-Hex Keys will drive a SAE (9pc, 1.5-10mm)
EKL-10113 EKL-10907
fastener at up to a 30 degree angle. $999
• Eklind® BALL on STUBBY short Short Series EKL-10609 Long Series
(13pc, .050”-3/8”)
arm facilitates access in very tight Long Series $1999
spaces. Tilt key to provide greater $999 (9pc, 1.5-10mm)
hand clearance. EKL-10213
$1299
EKL-17609 Long Series EKL-13609
(13pc, .050”-3/8”)
9pc 1.5 to 10mm Ball End Series
$1299 (9pc, 1.5-10mm)
$3199 EKL-13213
$1799
Ball End Series
(13pc, .050”-3/8”)

$2499

ERGO Fold Allen Metric TORX Classic Fold Allen Metric
Wrenches EKL-25161 EKL-25581 Wrenches EKL-21151
SAE
Composite Grip Handles 6pc, 3mm to 10mm 8pc T8-T40 EKL-20511 (6pc, 3mm to 10mm)

SAE $1299 $1699 (5pc, 3/16” to 3/8”) $1099
EKL-25611 EKL-25171 EKL-21171
$999
6pc, 5/32” to 3/8” 7pc, 1.5mm to 6mm EKL-20812 (7pc, 1.5mm to 6mm)

$999 $799 (8pc Long, 3/32” to 1/4”) $599
EKL-25911 EKL-25181 EKL-21172
$999
9pc, 5/64” to 1/4” 9pc, 2mm-10mm EKL-20911 (7pc, 2mm to 8mm)

$999 $1199 (9pc Short, 5/64” to 1/4”) $799
EKL-25912 TORX
$999 EKL-22571
9pc, .05” to 3/16” EKL-20912
(7pc, T10-T40)
$799 (9pc, .05” to 3/16”)
$1499
$599

Tool News | July-September 2021 39

Hand Tools Individuals from Century 5pc Screw Extractor Sets 5pc Screw Extractor Set
Drill Bits
• 1-5 flute screw extractors • Set contains size 1-5 screw extractors
HSS, Titanium, Cobalt • Four double-edged cutting/gripping
Sizes Up to 1-1/2” CTR-73415 (Spiral)
CTR-73215 (Straight) edges for 8 points of contact
Tap and Dies - Your Choice • For both left and right hand threads
$1499
NC, NS, NF Style KNI-9R4719003
9pc Screw Extractor Set $5999
Wire Brushes
Designed to remove broken studs, bolts, 29pc Titanium Coated
Radial and Cup Style sockets, screws and fittings Drill Bit Set
Radial Up to 4” Cup to 2-3/4” Left hand spiral design
Includes sizes: #1-#9 • Include sizes 1/16” to 1/2” by 64th.
Grinding Wheels • 3/8” Reduced Shank
TIT-16082
For metal cutting/grinding $5999 TIT-16530
Up to 7” Diameter $3499

Hole Saws

Bi-Metal Cobalt Shark Tooth
Hole Saws
Up to 6” Diameter

DRILL BITS 29pc Brite Drill Pod

Brite Drill Indexes 5pc Stubby Drill Bit Set Deisgned for general purpose
applications in wood, plastic, and plastic.
Best for drilling Soft Metal, Wood, • Short length for confined areas
Plastics and Plaster • 1/4” Hex Shank CTR-22529
15pcs Reduced Shank, • Includes: 3/32”, 1/8”, $7999
Sizes 1/16” to 1/2” by 32nds
3/16”, 1/4”,and 5/16” 29pc Cobalt Drill Pod
CTR-23915
CTR-17905 Cobalt drills are designed to cut
MSRP $102.10 $2499 through extremely hard metals,
including stainless steel. Aerospace
$5999 NAS 907-J specifications.

CTR-26529
$14999◉

29pcs, Sizes 1/16” to Cobalt Drill Indexes 115pc Master HSS Drill 10pc Spiral Flute
1/2” by 64ths Bit Set Extractor & Bit Set
Best for drilling Stainless Steel, Steel,
CTR-22929 Mild Steel and Soft Metals Drill Bits A-Z, 1 to 60, & 1/16”-1/2” • 5 LEFT-HAND Cobalt Drill
15pcs, Sizes 1/16” to by 64ths Bits, 5/64” to 19/64”
MSRP $179.10 1/2” by 32nds
IMP-21-DS115 • 5 Fluted Screw Extractors,
$9999 CTR-26315 $9999 sizes EX-1 thru EX-5

8pc S&D Drill Indexes MSRP $154.91 HAN-11119
$4999
Best for drilling Mild Steel, Soft $8999
Metal and Wood 25pc Screw Extractor
29pcs, Sizes 1/16” to 10pc Reverse Drill & & Drill Bit Set
CTR-44408 1/2” by 64ths Screw Extractor Set
• Extracts screws / bolts, & removes
MSRP $510.08 CTR-26129 • (5) Reverse Drill Bits, broken fastener w/out breaking or
• 5/64, 7/64, 5/32, 1/4, & 19/64. jamming.
$24999◉ MSRP $396.76 • (5) Screw Extractors,
• 1 - 5. • Use on thread sizes 5mm to 16mm.
29pc HSS Drill Bit Sets $22999
TIT-16013 AST-9447
• Include sizes 1/16” to 1/2” by 64th 29pcs, Sizes 1/16” to $1499
1/2” by 64ths MSRP $61.30
3/8” Reduced Shank
IMP-21-DS29 CTR-26329 $4999
IMP-21-DS29R
$3399 MSRP $282.22

$15499

3pc Step Drill Set

1 - 13 Hole Sizes (1/8” to 1/2”)
2 - 6 Hole Sizes (3/16” to 1/2”)
3 - 9 Hole Sizes (1/4” to 3/4”)

TIT-16503
$1999

40 Tool News | July-September 2021

DRILL EQUIPMENT GM Manifold Drill Dodge Manifold Drill Hand Tools
Template Template
Ford Triton Manifold Drill
Template • Removes broken exhaust manifold bolts • Removes broken exhaust manifold
on GM LS III 4.8L, 5.3L & 6.0L motors bolts on Dodge 5.7L Hemi Motors
• Designed to remove broken exhaust without damaging cylinder head. without damaging cylinder head.
manifold studs on 4.6L, 5.4L and 6.8L V10
2 valve and 3 valve Ford Triton engines LIS-71400 LIS-71500
without damaging the cylinder head.
MSRP $164.95 MSRP $184.95
LIS-68500
$11999◉ $12999◉
MSRP $142.95

$9999◉

Manifold Drill Template For Ford Manifold Drill Template For 6pc Bolt & Stud Stud Remover &
4.6L, 5.4L & 6.8L Ford 6.0L & 6.4L DIESEL Extractor Set Installer
• Removes Broken Exhaust Manifold Bolts Removes stuck studs, rounded
• Removes Broken Exhaust Manifold Bolts on on Ford 6.0L and 6.4L Motors Without bolts and nuts from sizes 1/4” • Range: 1/4” to 3/4” / 6-19mm
Ford 4.6L, 5.4L and 6.8L V10 2 Valve and 3 Damaging the Cylinder Head. to 9/16” (6mm to 14mm). The • Fits hard-to-reach areas.
Valve Ford Triton Engines Without Damaging remover spline cuts into the bolt • Use w/ 1/2” drive tools.
the Cylinder Head. LIS-71350 head or threads for a sure grip
CTA-9011
LIS-71600 MSRP $184.95 LIS-19250
MSRP $32.95
MSRP $254.95 $12999◉ MSRP $48.95
$2999
$17999◉
$3999

5pc Left Hand Drill 10pc 1/8” Stubby 11pc 1/2” Dr. Flank Bite AST-7411 (SAE)
Bit Set Body Panel Double- Damaged Fastener Impact
End Drill Bits Socket Sets • 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
• Industrial, polished 11/16”, 3/4”, 13/16”, 7/8”
finish, 135° split point • 135° point for fast drilling • Flank Bite design works on up to
• High Speed Steel 90% rounded hex bolt head AST-7411M (MM)
• Premium, cobalt steel
TOO-15210 • Both sets include a punch bar • 8, 10, 11, 12, 13, 14, 15, 16, 17, 19mm
CTR-74105 $499 for removing jammed bolts from MSRP $93.38
sockets & 10 sockets
MSRP $79.15 $6999

$4499

3-Valve Insert Repair Kit Broken Spark Plug Thread Restoring Files Sav-A-Thread...
Remover Ford Triton
Repair damaged threads or blowouts 3-Valve Engines • Restores threads on bolts & shafts The only thread repair product that
in 30min or less per cylinder. Use • Files are cross-cut & depth can be used to repair both taper
w/ 5.4L & 6.8L engines built before Set Includes a Unique Porcelain seat and gasket type spark plug
10/9/07, and for 4.6L engines built Pusher Tool, that removes broken proportional to the thread pitch assemblies.
before 11/30/07. spark plugs from 2004 & newer • All are 7/16” square x 8-3/8” long
Triton 3 valve per cylinder engines HEC-5334-14
CAL-39300 CTA-8231 (Metric)
LIS-65600 (M14x1.25)
MSRP $418.34 $8999 • Sizes: 0.8 - 3mm
$4499
$21999◉ CTA-8233 (SAE)

• Sizes: 11-24 TPI

CTA-8235 (SAE) Your Choice
• Sizes: 9-32 TPI $1499

TAP & DIE SETS

AST-7580 (19pc SAE) CTR-98900 (40pc SAE) 41pc SAE: Sizes 4-40 to 1/2” 53pc Universal
Rethreading Kit
• Sizes 13-28 to 1/2” NF • Sizes 4-40 to 1/2” NF IMP-22-TD41H
• Includes (2) Thread Files, plus the following:
AST-7581 (19pc Metric) CTR-98912 (40pc Metric) 41pc Metric: Sizes 3mm to 12mm • TAPS & DIE SETS
• MM: 6-14
• Sizes 5 to 12mm • Sizes 3 to 12mm IMP-22-TD41HM1 • NC-USS: 1/4”-9/16”
Your Choice Your Choice $4999 • NF-SAE: 1/4”9/16”
Your Choice • DIES ONLY
$7999 $12999◉ • Metric: 6x1.25, 7x1, & 8x1
• NC-USS: 5/8”-11
• NF-SAE: 5/8”-18

CTA-8240
$169 99

41Tool News | July-September 2021

Hand Tools Radio Removal Tool Transmission Oil Cooler DISCONNECTS
2pc Set Disconnects for Ford 19pc Set
6pc Set • Combines both the above kits,
Specifically for Ford Radios Two Sizes, 3/8” and 1/2” • Easy to use in confined spaces
Use 3/8” size for 2003 and later Ford V8 Explorer, • Disconnects Spring Lock Couplings plus specialty disconnects.
OTC-7575 2004 and later Ford F150 and Cadillac CS. Use 1/2” • Sizes: 5/16”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8”
$999 size for Ford Super Duty trucks, F250, F350 and F450. LIS-39900
LIS-37000 $5499
LIS-39220 $999
$2999

DEF Disconnect Set 6pc Angled
• Also Connects Fuel Lines
Allows Easy Access to Hard-to-Reach DEF • Sizes: 5/16”, 3/8”,
Fill and Breather Lines on 2012 and Newer
Ford Power Stroke and Dodge Diesel. 1/2”,5/8”, 3/4” & 7/8”
Three sizes for many applications.
LIS-39400
LIS-37450 $1999
$1999

TERMINAL SERVICE Deutsch Terminal Tool 4pc Wire Terminal Tool Kit
Deutsch Master
• (3) Terminal Release Tools • Deutsch open and closed • Works on OEM Electrical • Work on conventional terminals, Pack-Con
• (1) Open Barrel Crimping Tool Connectors Used on variety of and Weather-Pack terminals (GM vehicles),
• (2) Closed Barrel Crimpers barrel terminals vehicles & equipment plus many Ford applications
MSRP $153.95 • Weather Pack terminals
TOO-18650 • Metri-Pack terminals • Kenworth & Peterbilt Trucks, Harleys LIS-57750
• Other open barrel terminals • Caterpillar and industrial connectors
$12499◉ MSRP $256.95 LIS-59600 $4999
$2999
TOO-18700
$21499◉ Ratcheting Terminal TIT-11477
Wire Crimpers
TOO-18900 (Heavy Duty) • Color coded wire sizes
red 22-18AWG-DIN 0.5-1.0mm
• Crimps 22 to 10 gage insulated blue 16-14AWG-DIN 1.5mm-2.5mm
wires yellow 12-10AWG-DIN 4-6mm

$2999 $1999

WIRE STRIPPERS TOO-19100 KNI-1262180SB

TIT-11469 TOO-19000 • 12-22 gauge wire • 10-24 gauge wire
• Self-Adjusts • Self-Adjusts
• 12-22 gauge wire • 12-22 gauge wire • Wire Cutter • Wire Cutter
• Self-Adjusts
$2499 $2499 $5999
$1499 TOO-18950

• 10-26 gauge wire
• Self-Adjusts

$2199

CIRCUIT TESTERS 12/24/48V Audible Kit w/8 Noid Lights & 2pc
Circuit Tester IAC Test Lights
LED Circuit Tester 12/24/42v
Circuit Tester AUDIBLE Tone is heard when Use to test spark plug circuits,
• Voltage measurement from 4-60 VDC current is detected electronic fuel injection signals & idle
• Applications: 6, 12, 24 & 48V DC systems • Computer Safe – draws 3 milliamps LED illuminates when grounded air control circuits.
• Testing Current: <10mA •Display: LCD at 12V Use on 12, 24 & 48V DC systems
• Resolution: 0.1V Measured Voltage: 0.3 - 60 VDC TOO-36350
• LED Indication: Green (-) / Red (+) • Has 2-LED’s for easy voltage Testing Current: <10 mA $7999
• Cable Length: 10ft identification: + BLUE for 12 & 24v /
• Operating Temperature: -10 – 50°C RED for 42v CTA-2830
• Operating Humidity: <80% $4999
• Heavy duty ground clip w/ insulator.
AST-7767
$2999 TOO-28200
$1999◉

In-Line Spark Checker Kit “Check Point” Heavy Duty Heavy Duty Computer Safe
for Recessed Plugs Circuit Testers Circuit Tester
TOO-27000 TOO-27300
Troubleshoots virtually all domestic 6 &12 Volt systems $899 Safe for automotive computers
and import cars, SUV's & trucks • 12ft retractable wire & clip
TOO-21000 LIS-24550
TOO-23970 $699 $1199 $1499
$2499

Cordless Circuit Tester Digital Circuit Tester Heavy Duty Circuit Tester In-Line Spark Testers
TIT-11436 • Reinforced housing to last a lifetime! TOO-23900
V-tip needle, doesn't require ground $1999 Tests up to 12v LIS-20610 TOO-23920 (w/90° Boot)
wire or clip. Safe w/ ECMs, sensors, $1499 Your Choice
transducers, airbags, etc. LIS-28400 $999
$1499
AST-7760
$1499

42 Tool News | July-September 2021

Pilot Punch Kits All-Around Punch & Hose Pick Set (103/4”OAL) PUNCHES Hand Tools
Chisel Set CHISELS
6pc Set 14pc Set • Cotter Pin Puller PICKS
• Sizes: 1/8”, 5/32”, 3/16”, • 45° Hose
Punches: (2) Solid, (5) Pin, • 90° Hose 4pc DOMINTOR®
7/32”, 1/4”, & 5/16” (1) Line-Up, & (1) Center • Hose Puller Straight Scraper Set
Chisels: (5) Cold
MAY-62250 MSRP $114.56 MAY-13096 • 3/4” Wide Scraper
• 11/2” Wide Scraper
MSRP $69.16 MAY-61044 MSRP $80.62 • 1” Wide Scraper
$9499 • 1/2” Wide Scraper
$5499 24pc Set $6499
4pc Set (103/4”OAL) MAY-14082
9pc Set Punches: (6) Solid, (6) Pin, (1) Prick, &
• Sizes: 1/16”, 5/64”, 3/32”, 1/8”, (2) Center • Straight MSRP $116.53
Chisels: (6) Cold, (1ea) Cape, Half • Hook
5/32”, 3/16”, 7/32”, 1/4”, & 5/16” Round, Diamond Point • Dual Angle $8999
MSRP $203.55 • 90° Bend
MAY-62252 Heavy-Duty Seal Puller
MAY-61050 MAY-13094
MSRP $93.04 $13999◉ Remove the most stubborn seals w/
MSRP $78.44 this puller that is finished in black oxide
$7499
$5999 MAY-37019
12pc Set Long Set (133/4”OAL) $3499
• Sizes: 1/16”, 5/64”, 3/32”, 1/8”,
• Straight
5/32”, 3/16”, 7/32”, 1/4”, 5/16”, • 90° Bend
3/8”, 7/16”, & 1/2” • Compound Bend
• Hook
MAY-62254 • Offset
• Dual Angle
MSRP $141.82
MAY-13095
$11499
MSRP $125.64
5pc Long Pin Punch Kit
$9999
Sizes; 1/8”, 3/16”, 1/4”, 5/16”, & 3/8”
Dominator™ Pry Bars PRY BARS Pry Bar Set
MAY-62065
• Newly designed handle Colored 3pc Dominator MAY-61355 - 3pc Set
MSRP $57.87 • Hardened, tempered steel shaft Pry Bar Sets
+7”C, 12”C, 18”C
$4999 runs from cutting edge through Includes 12”, 17”, and 25” sizes
the handle The ergonomic handle is forged through Total Value $96.29
6pc Cold Chisel Kit • Capped end is in direct contact the handle for ultimate, lasting toughness. $7499
w/ the shaft, allows user to strike
Sizes: 1/4”, 5/16’, 3/8”, 1/2”, 5/8” & 3/4” w/ out damaging the handle

MAY-60560 Made in the USA.
Green
MSRP $57.18 PART DESCRIPTION PRICE MAY-14071GN Heavy Duty
MAY-14117 36” Long $74.99 Indexing Pry Bar
$4499 MAY-14118 42” Long $84.99 $7999◉
MAY-14119 48” Long $124.99 The prying head is 13/16” wide and
Punch & Chisel Holder MAY-14120 58” Long $139.99 Blue can be extended from 34” to 53”.
MAY-14071BL Provides 1500 lbs to 2200 lbs of
• Works w/ punches or chisels up to $7999◉ “persuasion” for many service and
1” diameter 4pc Pry Bar Set maintenance needs.
Orange
• Great for use in tight spaces MAY-14071OR OTC-7177
$16999◉
MAY-50301 $7999◉

MSRP $38.73 Tough polypropylene handle grips
Forged carbon steel with black
$2999 oxide finish
Includes: 8, 12, 18, and 24 inch The Big Stick
Hook & Pick Sets
TIT-17103 The Big Stick is now the biggest
• Shaft runs from tip through handle. $2999 Dominator pry bar at 54” in overall
• Capped-End, prevents damage length with a blade made out of 7/8”
End Capped Pry Bars 45” Long Pry Bar steel and an overall weight of 13lbs.
to handle • Lifetime warranty LNG-853-45
MAY-14124
Mini Set (61/2” OAL) 3• MpacdePirnythBe Ua.rSS.Ae. t 12”, 17”, 25” $6499 $15999◉

• Contains: Scratch Awl, plus 90°, LNG-853-3ST 4 Piece Pry Bar Set
Complex, & Curved Hooks
$5999 • PB4 - features screwdriver
MAY-60003
$1999 5pc Pry Bar Set 12”, 17”, 25”, 31”, 36” type handles and has
LNG-853-5ST sizes 8”,12”,18” & 24”.
4pc O-Ring • PB40 - features heel-end
Remover Set $11499 pry bay style and has sizes
6”,12”,16” & 20”
• For removal of o-rings and seals Rolling Head Pry Bars Jimmy Bars
• Rounded tips for easy, damage free IMP-09-PB4
$1599
removal
• (2) tip configurations w/ (2) blade IMP-09-PB40
$1899
lengths
PART DESCRIPTION PRICE PART DESCRIPTION PRICE
MAY-60028 OTC-7162 6” long $29.99 OTC-7166 5/8” dia, 18” long $29.99
$2499 OTC-7163 12” Long $34.99 OTC-7167 3/4” dia, 24” long $34.99
OTC-7164 16” Long $37.99 OTC-7168 7/8” dia, 30” long $39.99
OTC-7165 18” Long $39.99 OTC-7420 7/8” dia, 46” long $99.99
OTC-7421A 1” dia, 54” long $119.99

43Tool News | July-September 2021

Hand Tools HAMMERS

Sledge Hammers 4lb Hammers 5pc Ball Pein Dead Blow Hammers
Wood Handle IMP-05-CPH4 Hammer Set IMP-04-DBH1
IMP-05-SH4 (4lbs) (Cross Pein) (1lb) $1299
$1899 IMP-05-DH4 • Drop Forged and Heat Treated. IMP-04-DBH2
Fiberglass Handle (Drilling Hammer) • Durable Fiberglass Handles. (2lb) $1599
IMP-05-SH8F (8lbs) $1899 • Includes: 8oz, 12oz, 16oz, IMP-04-DBH3
$4999 16oz Ball Pein Hammer (3lb) $1999
IMP-05-SH12F (12lbs) TIT-63160 24oz, & 32oz
$5999 $1499 IMP-04-DBH4
IMP-05-SH16F (16lbs) IMP-04-BH5F (4lb) $2799
$7499 $3999
3pc Dead Blow
Hammer Set
TIT-63133
$2999

Brass Hammers High Quality Hammers 5pc General 8pc Hollow Gasket
w/Rubberized Grips Hammer Set Punch Set
Flame tempered hickory handles. TIT-63000
Non-marring, non-sparking • (1) 16 oz. Ball Pein Hammer • Punch round holes in paper, fiber, cloth,
solid cast heads. 3lb Sledge • (1) 32 oz. Ball Pein Hammer rubber, leather and other gasket materials.
• (1) 32 oz. Rubber Mallet
20oz ballpein $1999 • (1) 3 lb Cross Pein Hammer • Includes: seven hole punches (1/4” - 5/8”)
WLS-H20 • (1) 3 lb Sledge Hammer and the P69 drive mandrel.
$5999 TIT-63004
3.5lb single TIT-63125 • Made from alloy steel & heat-treated.
jack 3lb Cross-Pein
WLS-H56 MSRP $91.00 VIM-P79
$8499 $1999
$7499 MSRP $63.43
TIT-63216
$5499
2lb Brass Non-Sparking

$4499

TIT-63233

2.5lb Stone Hammer

$1999

BRASS PUNCHES

Brass Drift Punches 2pc Brass Punch Set 3pc Brass Drift 4pc Brass
Punch Set Assortment Set
Manufactured from machined round Two large brass non-sparking punches ideal
stocks. Non-slip knurled handles on for use near precision parts. • For non-marring and non-sparking • Used for non-marring applications
some models. Chamfered ends - 8” punch (5/8” hex, tapered to 3/8”) applications • Designed to inhibit sparking
- 10” straight punch (3/4” diameter) • 1/4” - solid punch
WLS-DP112 *chamfered ends • For aligning unhardened steel or • 1/4” & 3/8” - pin punches
aluminum • 3/8” - drift punch
1” x 12” drift, knurled OTC-4602
$3999 • Designed for use on harder surface MAY-62277
$6499 materials that will not be damaged
WLS-32 by the softer brass punches. MSRP $51.11

3/4” x 9” drift, knurled SKT-6323 $3999

$2999 MSRP $70.24
WLS-38
$5999
3/4” x 11” drift, knurled
9pc Brass 1/4” Stamp Sets 32pc Transfer Punch Set
$2999 Pilot-Punch Set IMP-10-LP14
WLS-52 • Sizes: 3/32” - 1” in 1/64” increments,
• Will not damage harder materials 27 piece letter plus a 17/32” punch
5/8” x 9” drift, knurled • Non-Sparking, Non-Marring, & Non-
$2299 • Made from heat treated & tempered
$2499 Magnetic IMP-10-NP14 tool steel
WLS-53 • Includes Sizes: 1/16”, 5/64”, 3/32”,
9 piece number • Length: 4-7/8” (.00025 diameter)
5/8” x 9” drift, tapered 1/8”,5/32”, 3/16”, 7/32”, 1/4”, & 5/16” • Comes in a durable pouch
• Knurled Grip Handle $999
$2499 CEN-3S301B
WLS-58 MAY-61367 $5999

5/8” x 11” drift, knurled MSRP $69.53

$1999 $5499

44 Tool News | July-September 2021

GAUGES – CALIPERS Hand Tools

Dial Indicators Sets Indicator sets with on/off 0-1” Dial Indicator Self-Centering
magnetic base IMP-26-DI1 Cylinder Bore Gauge
All Sets Feature: Range 0-1” & CEN-3D104 (Analogue)
Graduations .001” • Graduations .001” • 1.4-6” Range
Graduations: .001” • .0005” graduations
CEN-3D101 Range: 0-1” $2299
MSRP $131.94 CEN-3D302
• Compact magnetic base Magnetic Base
MSRP $90.56 $11499 MSRP $180.00
• 77 lbs of Holding Power
$7999 CEN-3D105 (Digital) • On and Off switch $15499◉
CEN-3D102
Graduations: .001”/.01mm IMP-26-MB
• Compact magnetic Range: 0-1” $2299
base with flex arm MSRP $204.83

MSRP $163.10 $17999

$13999 CEN-3D107

CEN-3D103 • .001” graduations up to 1”
• On/Off magnetic base.
• Use locking pliers to clamp MSRP $94.36
to any convenient object
$7999
MSRP $123.06

$11499

Professional 0-6” Dial Calipers Electronic Digital Drum Gauge

Features (4) Measurements: Inside, Outside, Depth, & Step • Range: 6” - 20” (150-500mm) w/ .001” (.01mm) graduations
• Easy to Read, w/ Pointed anvils and 4-1/4” long arms
Dial
CEN-3B531
• 100° per Revolution w/.001” Graduations
MSRP $256.87
CEN-3C101
$5999 $17999◉
DIGITAL - Inch & Metric
Digital Depth Gauge
• Graduations of .0005” & .01mm
• Easy to read digital display
CEN-3C301 • 16” range with .0005” accuracy
$3999 • Interchangeable rods for depth needed
DIGITAL - Inch, Metric, & • Inch/Metric with the push of a button
Fractional
CEN-3M746
• Large LCD digital display. $5499
• Graduations of .0005”, .01mm, & 64th.
6pc Telescoping Gauge Set
CEN-3C350
$4999 • Both contacts release or lock by turning
knob at end of handle. Handles up to 5-1/2”.
Carbon Fiber
CEN-3C351 • Measurement is read w/ a micrometer.
$1999 • Self Centering gages
• Range 5/16” to 6”

CEN-3S116
$4499

FEELER GAUGES Angle Finder

26 Blade Offset Feeler Gauge 31-Blade Deluxe Used to measure truck and automotive
Feeler Gauge front ends and drive shaft angle.
• Contains: 26 Blades - 4” x 1/2” with thicknesses .005-.030
• Blades have 1” 45° offset for checking valve clearances • Ranges from .0015” to .035” CEN-6494A
• Equipped with knurled lock-nut, which releases the blades instantly for rapid • up to 4-1/2” O.D.
MSRP $17.98
selection of size desired and when tightened locks the individual blade into the LIS-68100
working position, retaining the blades not in use firmly in the handle $999 $1499
• The sizes, both decimal and metric equivalent, are permanently etched on each
blade.

LNG-3275A

$1499

25-Blade 12” Feeler Gauge 9pc Brake Lining Thickness
Gauges
• For Long Reach Applications
• Sizes Include: .0015, .002, .003, .004, .005, Allows Brake Pad Wear to be Accurately and
Consistently Measured without Guessing
.006, .007, .008, .009, .010, .011, .012, .013, • Color-coded gauges match SAE or Metric
.014, .015, .016, .017, .018, .019, .020, .021, .025,
.027, .030, and .040-inches rec.’s for brake pad replacement
• Check both straight on or a 90°
CTA-A311
$1999 angle to the rotor with offset tips

LIS-81850

MSRP $25.73

$1999

45Tool News | July-September 2021

Hand Tools TORQUE WRENCHES 3T Series Torque Wrenches

Push Through Ratchet Torque • Micrometer type scale for setting
Wrenches • Torque indicated by feel and sound
• Includes plastic case
• Selected reading is automatically locked in. • Graduations in 1 ft-lb
• Indicates desired torque by feel and sound.
• Accuracy +-4% right hand and +-6% left 1 Year
Warranty
hand direction from 20-100% of capacity.
• Rugged non-slip metal handles.
• Meets ANSI standard B107.14M

1 Year DESCRIPTION PRICE PART DESCRIPTION PRICE
Warranty 1/4” 20-200in lbs $169.99 CEN-3T317 3/8” Dr 20-200in lbs $54.99
PART 3/8” Dr 25-250in lbs $149.99 CEN-3T415 1/2” Dr 10-150ft lbs $59.99
CEN-97361B 3/8” Dr. 10-100ft lbs Flex Head $149.99 CEN-3T425 1/2” Dr 25-250ft lbs $99.99
CEN-97351A 1/2” Dr 25-250ft lbs $169.99 CEN-3T660 3/4” Dr 100-600ft lbs $449.99
CEN-97352A 3/4” Dr 100-600ft lbs $634.99◉
CEN-97353A 1/2” Dr 30-150ft lbs Flex Head $154.99 By SK Hand Tool
CEN-97355A
CEN-97362 • Dual scale feature for easy change from SAE to Metric
• Positive lock with spring-loaded pull-down lock ring, making it
1/2” Drive Digital Reversible
Torque Wrench easy to set and retain settings better
• Comes in a durable storage case to protect your investment
• Range: 15-150 ft/lbs, 180-18000 in/lbs & 20.3-203Nm. • Individually serialized with matching certificate of calibration
• Double Gear Sensing System (Peak & Track Mode).
• 8-bit electronics ensures accuracy of +/- 3.5%. traceable to N.I.S.T.
• Equiped w/ large backlit LED digital display & audible buzzer
1 Year
BRO-BLD0212BM Warranty

MSRP $150.00 PART DESCRIPTION PRICE
SKT-77002 1/4” 20-150in lbs $299.99◉
$12499 SKT-77025 3/8” Dr 30-250in lbs $214.99◉
SKT-77100 3/8” Dr 10-100ft lbs $219.99◉
All Torque Wrenches Come SKT-77150 1/2” Dr 20-150ft lbs $244.99◉
in a Blow Molded Case SKT-77250 1/2” Dr 30-250ft lbs $259.99◉
SKT-77600 3/4” Dr 100-600ft lbs $999.99◉
**Except: IMP-11-TW38, IMP-11-TW12,
CEN-6387, CEN-6380, TIT23140**

TORQUE TOOLS “Click Stop” Torque Wrenches 4:1 Torque Multipliers

1/4” Beam Type Torque Wrench 3/8” dr 120-960in-lb 1/2” dr 10-150ft-lb Designed w/ (4) pinion gears in a compact
housing. Frictional losses in the gear train may
• 0 - 80 in-lbs; 0-9 N-m IMP-11-TW38 IMP-11-TW12 cause a torque loss of 10% to 20%.
• Works with both left & right hand fasteners! $3999 $4599
CEN-6387 (3/4” to 1”)
TIT-23140
$2999 • Output Capacity = 2,000 ft.lbs.
• Weight & OAL = 14lbs x 25”
Breaker Bar SKT-41654 MSRP $781.98
$9999
• Drive: 1/2” $62499◉
• Overall Length: 24”
CEN-6380 (1/2” to 3/4”)
IMC-41024
$3999 • Output Capacity = 1,000 ft.lbs.
• Weight & OAL = 7lbs x 22”
Torque Angle Gauges MSRP $583.57
Digital
$47999◉
• Easily measure angular rotation for torque &
angle applications w/ an accuracy of +/- 2%. Analog

• Utilizing a V-channel and magnets, it quickly • Equipped w/ 1/2” Square Drive (Male & Female)
attaches to the handle of any standard for both socket and ratchet
ratchet, wrench, or breaker bar.
• 360° scale marked in 2° increments w/ intervals
• Works on 1/4”, 3/8”, 1/2” & 3/4”. of 10° & 30°
• Built-in feature allows the user to keep track
OTC-4554
of angular rotation even when using a ratchet. $1999

BRO-BLDAG001

MSRP $122.70

$9999◉

46 Tool News | July-September 2021

Brake Caliper Press 3pc Thread Restorer File Set Hand Tools

• Will work with almost any wrench. An easy way to generate more torque. Ideal • Pitches include: SAE Rethread Files (Threads per inch): 9, 10,11,
for loosening stubborn nuts and bolts in hard to reach areas. Prevents you from 12, 13, 14, 16, 18, 20, 24, 27, 28 and 32; Metric Rethread File
damaging your wrenches by hammering them or latching them together to (Millimeters per thread): 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00
increase leverage. Round handle provides comfortable grip.
• Packed in a reusable pouch
LNG-279
LNG-2573
$5999
$2999
19pc Magnetic Socket Inserts (SAE, Metric)
GM 6.6L Duramax Diesel Fuel System Test Kit
• Includes nineteen pieces: SAE and Metric sets combined
• Magnetic insert firmly holds the fastener in the socket for easy • For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines.
• Gauge assembly with 6-ft. hose and quick coupler.
installation/removal. • 3-1/2” gauge reads 30 inHg to 15 PSI.
• Prevents fasteners from dropping into restricted areas where they
LNG-TU-32-6
can be difficult to locate and/or retrieve
• Magnetic insert can be left in or removed for use in other sockets $17999◉

LNG-522

$2499

Small Engine Compression Tester 6” Diameter Tail Pipe Cutter

• Will test all small engines with M14 or M18 threads. • Working range to cut tailpipes from 3-1/2” to 6” diameter.
• Valve core at bottom ensures accurate readings. • 12 cutting wheels allow superior tracking.
• The 1-1/2” gauge has a dual scale dial with ranges from 0-200 PSI and 0-14 bar. • Cutting wheels do the work.

LNG-TU-21C LNG-210

$2999 $6999

Foam Kneeling Pad 10” x 19” 3pc Hose Pinch Pliers Set

• Closed cell foam laminated with orange in the middle of two black layers. • Pliers come in small, medium and large
• Size: 10” x 19”. size for all your hose pinch off needs
• Will not breakdown under harsh chemicals, including the harsh oils used
• Designed with self-locking feature
in the automotive/aircraft industry. • Used to seal vacuum, fuel line and radiator
• Aid for comfort and cleanliness when kneeling, sitting or lying on hard
hoses, plus other flexible materials
surfaces such as garage or home floors, gardens, patios, driveways, etc. • Patent pending offset design allows more
• Fine cell structure resists grease, oil and dirt.
• Easily cleaned with water. access in hard to reach areas
• Lightweight - easy to transport, store or hang up.
LNG-1500
LNG-1169-O
$7499
$1699
Timing Tool for GM, 4pc
Fuel Injection Tester - U.S. And Imports
• For Use When Servicing the Timing Chain on GM
• This basic fuel injection tester includes large and small Schrader adapters, 2.8, 2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L Engines.
M6-1.00 O-ring adapter, and tee manifold.
• Helps Ensure Camshaft Alignment During Timing
• The 2-1/2” gauge has a dual scale dial with ranges from 0-100 PSI and 0-7 bar. Chain Removal and Installation.

LNG-TU-113PB • Plates 1, 2 and 3 work on 2.8L, 3.0L and 3.6L
high feature V6 engines. Plate 4 works on ’04-’07
$5999 2.8L, ’07-’12 2.9L, ’04-’06 3.5L, ’07-’12 3.7L &
’02-’08 4.2L in-line 4, 5 and 6 cylinder engines.
Curved Hose Clamp Pliers
LIS-37530
• Cross-cut tip design grips most hose clamps from multiple angles.
• Ratcheting lock mechanism holds the clamp in an open position for hands-free $3999

use. Dual material grips for comfort. Works on most spring hose clamps. 15” Wrench Extender

LIS-17460 Curved • An easy way to generate more torque with almost any wrench.
LIS-17480 Straight • Ideal for loosening stubborn nuts and bolts in hard to reach areas.
• Prevents you from damaging your wrenches by hammering them
$4999
or latching them together to increase leverage.

VIM-WE15

$4999

2 pc. Slack Adjusting Tool and Wrench TubiX® Pipe Cutter

• Speed up installation and service on Meritor brake • QuickLock single-handed quick adjustment:
slack adjusters independent holding and clamping on the tube

• 5/16-inch double square ratchet has an angled • Easy one-handed pushing for quick adjustment to
head to give additional clearance for hands different tube sizes

• Fork-end release tool holds tensioner release • Comfortable: easy cutting due to high-quality
button securely without prying or damage needle bearings in the cutting wheel and guide rolls

TIT-85512 • Cuts pipes from 1/4” - 1-3/8” with wall thickness
$2999 up to 2 mm

KNI-903102SBA

$8999

47Tool News | July-September 2021

Hand Tools Double Ended Clip Heater Hose Plastic Fastener Wrinkle Band Ring Line Sockets,
Lifter Disconnect for GM Remover Compressor 19MM & 22MM
LIS-35460 LIS-39190 LIS-12320
• Removes plastic plugs and • Range of 3” to 5”
Thin tips provide easy access Designed to separate quick- fasteners from undercarriage Designed to Replace Fuel
when removing plastic clips. connect fittings on 3/4” heater and upholstery LIS-21700 Line Fittings on Cummins
line on GM vehicles $1799 ISB and ISX engines.
$999 LIS-35400
$1299 $999 $4999

Seal Puller 3/8” Hand Impact Ford 1.6L Ecoboost Engine Service Kit
Tool Set
• For oil and grease seals • Kit includes timing and seal service tools for services on
• 12-1/2” long • Loosens rusted, frozen the 1.6L Ecoboost engine.
nuts, bolts and screws.
LIS-56750 • Used when the VCT (Variable Camshaft Timing) phasers
$999 • Delivers 200 ft-lbs. of have been removed from the front end of the camshafts.
“shock torque”
• Used for holding the flywheel during timing and seal
LIS-29200 replacement.
$3999
• Used for aligning the Crankshaft Vibration Dampener.

CTA-2743
$12999

Mechanic's Stethoscope Compact Wire Clutch Pilot Bushing Telescoping Mirror
Strippers Remover
• Quickly pinpoints the source of • Telescopes from 10” - 14”
noises in the engines, transmissions, • Multi-Function Pliers will Cut, Strip, & • Uses hydraulic pressure to remove
differentials and bearings of any Crimp Insulated & Non-Insulated Wires. brass and bronze brushings from LIS-32050
vehicle 1/2” to 3/4” ID $999
• Wire Gauge is Marked on Tool
LIS-52500 • Self-Tapping Tip w/ 2-3 threads
$1999 LIS-68250 (14-24 Gauge)
LIS-68280 (8-14 Gauge) LIS-55600
$2999 $1399

IPR Socket for Ford Diesel Timing Tool for Ford 3.5L & 3.7L Valve Spring Compressor Universal Bearing
with Tensioner Hold Down for GM LS Packer
• Remove & replace the injector pressure LIS-37200
regulator (IPR) on Ford 6.0L, International, $5499 Allows removal of the valve spring • Place bearing between plastic
and other diesel engines. without removing the rocker stand cones, tighten, and apply grease
or other rockers. through fitting on threaded end.
• 3/8” square drive
LIS-16560 • Works on bearings
LIS-68210 $1999 up to 4-1/2” O.D.
$2999
LIS-65250
$999

Audi/VW Oil Drain Clip Removal Pliers 2 Piece Oxygen 3/8” Dr. Extra
Plug Tool Sensor Set Deep Sockets
Simply squeeze handles
• Removes new, plastic oil to pop out clips • Includes (2) 7/8” Oxygen • Includes 10mm, 12mm sockets
drain plugs without damage Sensor Sockets • Also services:
CTA-5310 • Diesel glow plugs
CTA-1037 $1999 • 3-1/4” Length • Benz C-Class (W240) rear
$999 • 3-7/8” Length
• 1/2” Drive bumper covers
Universal Camshaft Pulley & • Comes in pouch for storage
Crankshaft Pulley Holder CTA-1030
SKT-84700 $2499
• Holds camshaft or diesel pump
sprockets and gears for removal and $8999 4pc Lug Nut Remover
tightening of retaining bolts Socket Set
Pin Spanner Set
• Includes 7 sets of interchangeable pins • Use with 1/2” drive impact wrench.
– 3.5, 4, 4.5, 5, 6, 7 and 10mm • Includes (4) pairs of • Heavy duty threads make these
interchangeable 2-sided pins,
CTA-2855 providing (8) different sizes. sockets reusable.

MSRP $99.95 CTA-8120 CTA-A154
$4999
$8999 MSRP $125.00

$9999

Bulb Pliers Safety Hammer CV Joint Puller Goliath Ball Joint XL
• Pulls CV Joints w/ hidden retaining C-Frame Press
• For all types of bulbs • This Tool will Breaks Glass & Cuts rings w/out damaging the roller bearing
• Angled to fit the tightest of clearances Seatbelts, in order to get you out in an inside the joint • Features 3X the throat space and includes
• Can withstand heat up to 100° C (212° F) emergency a notched foot that allows for pressing out
• Use w/ an Axle Puller (5/8”-18) ball joints without removal of top mount
CTA-1012 • Lightweight handle w/double-headed
$1199 hammer and recessed razor CTA-4245 grease fittings.
• Includes both long and short drive screws.
CTA-10600 $2199 • 9.1” throat, 11.9” length
$999
AST-78100
$9999

48 Tool News | July-September 2021

Filter Wrenches and Tools Hand Tools

11pc Fuel and Oil 3/8” Drive Oil Filter Cap-Type for Toyota, 64mmx14 Flute Oil
Filter Cap Wrench Kit Wrench Lexus, & Scion Filter Wrench
CTA-096950 (11pc)
$4999 STANDARD CAP-TYPE • Size: 64mm (14 flutes) • Works on all 4,6,8 cylinder
• Precision-stamped to remove • Fits all 4-types of plastic & Toyotas, Lexus, Scion Models

Aftermarket & OE spin-on aluminum caps • Use with 1/2” Dr Tools
filters and filter housings
CTA-2465 CTA-1726
CTA-A268 $2499 $3499

• Size: 74.5mm (14 flutes)

$599

Swivel Grippers for Trucks 5pc Oil & Fuel Filter Universal Fuel Tank Lock
LIS-57050 Socket Set Wrench
45/16”-43/4”
LIS-57060 • Low profile design to fit tight areas Needed to remove fuel tank locking rings on
43/4”-5” • Includes; 3/8” drive 6 point 24mm, fuel senders for many 2004 and newer
LIS-57070 vehicles
51/4”-53/4” 27mm, 29mm, 32mm & 35/36mm
Your Choice sockets AST-78935
$1999 $3499
LIS-13300
Adjustable Angle $4499 Adjustable Oil Filter Pliers Set
Oil Filter Pliers
Jointed Jaw Filter Pliers • Includes small pliers: 13-1/2” long and fits filters
• Slip-joint handle offers a wide size range for ranging from 2-1/4” to 5” (57 mm to 127 mm) in
use on 2-1/4” to 4-3/4” oil and fuel filters • Jointed jaws rotate 180 degrees providing access diameter.
where standard pliers do not.
• Indents every 30° for 180° of total adjustment • AND Large pliers: 18” long and fit filters ranging
• Jaw teeth and cushioned handles provide from 3-3/4” to 7” (95 mm to 178 mm) in diameter.
AST-78515 maximum gripping power for slip free operation.
$1699 OTC-4562
• Range from 2-1/4” to 4 -3/4” $5999

OTC-4582
$8499

• Range from 3-1/8” to 7-1/2”

OTC-4584
$8999

Import Car Filter Wrench Bi-Directional 73-153mm 3 Jaw Spider Type Filter
• Fits Filters from 2 1/2” to 3 1/8”. Spider-Type Wrench w/ Adapter Wrench
• Removes all oil filters from 2 1/2” to 3 1/8” in diameter.
• For removal & installation of filters • Heat-Treated Arms with Specially • 61-124mm Capacity
This extra large range enables the 63600 wrench to fit • Low profile works in tight areas. Designed Gripping Jaws Grab • Use with either 3/8” or 1/2” tools
most all import car filters plus the common 3” domestic • Angled legs to bite into filters. Even the Most Stubborn Filters.
car filters. • Range: 50-95mm LIS-63830
• Removable adapter provides $2999
LIS-63600 CTA-2507
$1199 $1499 LlIoSw-e6r c3le8a9ra0nce in tight spots.
$3499

Compact Wrench for Paccar Compact Wrenches for Davco Ford 6.0L & 7.3L Fuel Filter Wrench

• Compact design and 3/8” square drive for easier • Compact design and 3/8” square drive for easier access to • Low profile design for easy access in tight areas.
access to Paccar chassis mounted fuel filter • Davco chassis mounted fuel filter assemblies. • Reversible Six lug design provides the
assemblies. Works on fuel filters found on Kenworth,
Peterbilt and Cummins diesels. LIS-61170 5” $2299 convenience of two sizes in one tool.
LIS-61180 6” $2499 • 3/8” drive
LIS-61380 LIS-61190 8” $2999
$2199 OTC-6760
$2499

Vent Cap Wrench for Davco Cummins Oil Filter Large Range Belt Filter Wrench
Plug
• Double Ended Wrench Removes • For Filters Up to 6” (152.4mm).
Vent Cap on Top of Davco Chassis • For 2500/3500 2013-2017 • Adjusts quickly to fit any spin-on oil filter up
Mounted Fuel Filter System Canisters. Cummins Heavy-Duty
Trucks to 6” diameter. Use with 1/2” drive or 3/4”
LIS-61070 wrench. Strong nylon belt.
$1399 LIS-57180
3pc Plastic Oil Drain Plug Set $1199 LIS-63500
$1199
Safely and Easily Remove Plastic Oil Pan Drain
Plugs Found on Many Late Model Audi, BMW, Ford Tool News | July-September 2021
and Volkswagen without Damage to the Plug.

LIS-51150
$3499

49

Hand Tools Battery Carrier Caulking Guns Tubing Benders
IMP-45-CGK (Skeleton)
• Use to lift and install most top post and side IMP-45-CGR (Ratchet) Enough leverage to bend
terminal batteries. Designed to transfer lifting Your Choice 3/16”, 1/4”, or 5/16” steel tubing
force to a secure hold on the battery; teeth $599
on jaws offer a secure grip. Vinyl strap resists Reversible Impact Driver Set IMC-806 (3/16”)
battery acid and will not conduct electricity. IMC-808 (1/4”)
• Use to loosen and tighten screws, nuts and bolts, IMC-809 (5/16”)
OTC-4620 w/ special handle to reduce risk of injury when
$1499 striking driver w/ hammer Your Choice

9pc Flexible Driver & Bit Set • Has 8 standard & long length interchangeable bits $3999
IMP-45-TB3H
• CrV blade w/ magnetic tip. TOO-14950
• Ergonomic cushioned handle. $2999 Bends 1/4”,5/16” and 3/8”
• Set includes:(1) Spring tube (215 mm)
(4) Slotted: 4mm, 5mm, 6mm 3/8” Drive Impact Driver Set $1899
(3) Phillips: PH1, PH2, PH3 IMP-18-ISD38 Tube Bending Pliers
(2) Star: T15, T20 $1199
• Bends tubing from the side allowing
TIT-12227 High Capacity for use in limited access areas.
$999 Hydraulic Crimper
Shaft in Seal Puller • 3/16” and 1/4” dia. tubing.
Crimping range: Cu: 10-120
Removes cam shaft and crank seals without mm² (AWG #6-4/0) OTC-4401
damage to the shaft Al: 25-95 mm² (AWG #4-3/0) $5999
Crimper capacity: 8 ton Tubing Bending Pliers
LIS-58430
$1999 TIT-11981 Bends copper, brass and other
Battery Nut Pliers $9999 soft thin wall tubing
Hydraulic Cable For use with 3/16, 1/4, 5/16, and 3/8
Used to Loosen or Tighten Battery Terminal Crimper inch outside diameter tubing
Clamp Nuts
Offset handle design for working in tight Crimping range: Cu: 4-70 TIT-11488
spaces. Serrated jaws for grip. Dual material mm² (AWG 11-2/0) $1499
grips for comfort. CAlr:i8m-5p0emr cma²p(aAcWitGy:85-1/t0o)n
Exo Burr™ External Deburrer
LIS-55240 TIT-11980
$1599 $8499 Quickly repairs damaged threads on steel bolts
Rotary Spot Weld Cutter Terminal Crimper including stainless steel and hardened steel, threaded
w/Rotating Die Set rod, copper, brass, aluminum, plastics, and wood.
• Remove spot welds from sheet Works with most power drills on materials ranging
metal w/ Double sided 3/8” & 1/4” • Crimps popular 8 - 4/0 AWG copper electrical from 5/16 to 7/8 inches (8-22 mm)
blade w/ retractable point and battery terminals using stranded wire Made from hardened steel

• Arbor fits all 1/4” Drills • Dies make hexagonal crimps TIT-51950
• Replacement 3pc Double Sided • Long handles for increased leverage (26” OAL) $4999

Cutting Blades TOO18025 TOO-18840 Stud Extractor
$14999◉
TOO-18000 Will effectively work on threaded, broken, rusted,
$1999 8 Inch Mini Bolt Cutters and smooth studs. Adjustable to fit studs 1/4” to 1/2”.
Works w/ your 3/8” impact wrench.
Ford Glow Plug Cuts up to 1/8 in. diameter bolts, threaded rod,
Harness Puller chain, fencing wire, concrete form ties and more! TIT-16023
$2499
• Helps prevent damage to the harness and TIT-11408
connector rail. $999 Drum Plug Wrench

• Features a thumb tab and a textured highly Fits most steel and plastic caps,
visible grip that provides a better grip on including 3/4-inch vent plugs
the tool when removing the harness.
LNC-5841
LIS-37370 $1599
$1099

S-Cam Air Brake Bolt Cutters IMP-22-BC18 32oz Non-Aerosol Spot Sprayer
Spring Tool IMP-22-BC14 18” Handle
14” Handle $2299 • 80-150 psi operating pressure (200psi MAX)
• Safely replace brake shoes on $1699 IMP-22-BC36 • Eliminates dangerous, harmful propellants.
heavy-duty tractors and trailers. IMP-22-BC24 36” Handle • Refillable & No more aerosol disposal issues.
24” Handle $4999 • Not for use with paint products.
• Simply hook the retaining spring loop $2799 • *Repair Kit Available Separately TIT19420
and press down against the axle IMP-22-BC42
42” Handle TIT-19419
OTC-5081 $8999 $4999
$9499
TIT-19421

2pc Blue & Red

$8999

50 Tool News | July-September 2021