The Tool News 2nd Edition 2016

TM GUIDED SHARPENING SYSTEM Adjustable Wire Stripper
Features the innovative Pivot-Response System! Never have a dull knife again! • Cuts and strip 12-22 gauge wire
• 1.25" x 6” coarse (320 grit) and fine (600 grit) Diamond Sharpening Plates. • Automatically adjusts to wire size

• 17° and 20° Angle Guides. *Not designed to strip teflon or similar insulations.

• Coarse and Fine Ceramic Hone with built-in Angle Guides.

• 3 sizes of ceramic rods to sharpen serrations.

12V Portable Power • Pivot-Response technology.
• Removable diamond plate holder.

Supply & Emergency *Upgrade kit w/ extra sharpening #TIT-11469
Jump Starter Kits stones also available
MSRP $19.99
Jump Starts Vehicles up to 20 TIMES! #DAR-WSGSS SPECIAL

• Come w/ AC & DC Chargers SPECIAL $14.99
• Supports 12V vehicle jump start.
$54.99

• Charges most electrics & cell phones. 20v 1/2” Cordless Impactools™ TITANIUM 1/2” Impactool™
• Can cycle up to 1,000 times
• Built-in Light w/ 3-Modes lasts up to w/ FREE 20v 3.0 Ah Battery w/ FREE Portable Power Source
60hrs

+ flashlight w/ 2 emergency strobe settings POWER: & Jump Starter Kit

400A 12000mAh • 780 ft-lb rev. torque & 1,100 ft-lb nut-busting torque. POWER:
• High-power rare earth magnet (neodymium) motor — offers a long life • 930 ft-lbs rev. torque & 1,350 ft-lbs nut-busting torque.
*NOT intended for diesel vehicles. and high power DURABILITY:
DURABILITY: • Titanium hammercase, steel-wear plate, & composite
#AST-7775 • All-metal drive, & reinforced housing. housing.
• Steel-lined aluminum hammer case — designed to be strong and light-
MSRP $150.00 weight for maximum protection of internal components. WEIGHT:
SPECIAL FREE #ING-BL2010X • At only 4.6lbs, it’s the lightest 1/2” impact on the market!
(A $228.00 Value!) FREE #CED2976CIR
$89.99 ($150.00 value!)

650A 17000mAh #ING-W7150-K1 #ING-2235TiMAX

(1 - 3.0 Ah Battery Kit) MSRP $665.00
MSRP $878.00 SPECIAL
SPECIAL
$364.99
$489.99

+ Will work w/ most diesel vehicles #ING-W7150-K12
+ Comes w/ MacBook Adapter
(1 - 5.0 Ah Battery Kit)
#AST-7785 MSRP $945.00
SPECIAL
MSRP $212.50

$544.99

SPECIAL $144.99 Extendable Magnetic Flashlights Rechargeable COB LED Slim Light

Digital Inflator Gauge • Telescopes from 6.5” to 21”, w/ a flexible shaft . • Unique dial power switch is infinitely adjustable from 0-410
• Powerful magnets on both ends. Lumen output!
A professional tool with • EMF-2 has improved rear magnet for horizontal placement and • 20lb magnet at base allows for easy placement on any
superior accuracy flexible 360° inspection mirror. magnetic surfaces.
• 40 Chip array allows for 850% more luminosity.
• Back-lit Digital LCD Display. * Available in 12pc Counter Display. • Includes: wall adapter and USB cable for charging.
• Long, straight-on dual foot chuck • Dimensions: 14.8” (L) x 3” (W) and only 1/2 lbs!
• Air Bleeer Valve for deflating #SPI-EMF1
• Protective Rubber Sleever. #AST-40SL
SPECIAL
#TFL-17879 SPECIAL
$15.99
SPECIAL $69.99
#SPI-EMF2
$39.99
SPECIAL

$19.99

PUBLISHED BY JOHN SNYDER TOOL, INC.

Like us on Facebook for exclusive
offers and promotions!

www.facebook.com/snydertool

ONYX Micro 2 & 3” “SNUB-NOSE” Impact Wrenches TM
Random Orbital Sander
 Free Speed: 9,000 rpm 20v MAX 1/2” Compact
 Perfect for spot finishing and touch-up work!  Socket Retention: Friction Ring Impact Wrench
 Access to smaller, confined work spaces.  Impact Mechanism: Jumbo Hammer
 Ensures a better finish w/ 3mm orbit.  Dimensions: 4.4" (L) x 6.7” (H) x 2.3” (W) w/ FREE 3/8” Compact Impact Wrench
 Spindle: 5/16”-24 (Female)  Weight: 2.9 lbs
 Free Speed: 16,000rpm • Max Torque: 152 ft-lbs
 Weighs a meager 1.3 lbs! #CPT-7731 (3/8”) • Impacts: 0-2,700 ipm
 Only 4.3” OAL • No Load Speed: 0-2,300 rpm
 Side Exhaust + MAX Torque: 415 ft.-lbs • Includes: (2) 20v 4.0Ah batteries,
Fast Charger, Built-In LED & Kit Box.
#AST-321 #CPT-7732 (1/2”) FREE #DCF883B
MSRP $186.45 (A $237.08 Value!)
SPECIAL + MAX Torque: 450 ft.-lbs
#DWA-DCF880HM2
$129.99 MSRP $245.14 MSRP $740.24
SPECIAL SPECIAL
Extension & Cord Management YOUR CHOICE
$329.99
#LEG-722-123050FZL5F $164.99

(12 ga. x 50ft Extension Cord) ULTRA COMPACT MODEL
 Lighted Plug w/ glow-in-the-dark stripe. #CPT-7732C (1/2”)

MSRP $69.00 + MAX Torque: 460 ft.-lbs
SPECIAL + only 2.1 lbs!

$54.99 SPECIAL

$179.99

#LEG-E8140503 X-FRAME Ratcheting
Wrenches
(14/3 ga. x 50ft Cord Reel)
 Adjustable cord stopper. • I-Beam handle distributes added force evenly for DIGITAL CIRCUIT TESTERS
 Cord locks in 3ft increments. superior strength. w/ BACKLIT LCD DISPLAY
 Grounded triple outlet. • Dual-opposing pawls work in tandem to provide added
strength. • The small & ergonomic design.
MSRP $165.00 • 1.7° Arc Swing provides 216 ratcheting positions for • Needle-sharp stainless steel probe.
SPECIAL maximum ratcheting ability! • Cable length : 11ft

$149.99 12pc Metric Set 12/24 VOLT
Sizes: 8, 9, 10, 11, 12, 13, #AST-7763
8v Gyroscopic Screwdriver Kit 14, 15, 16, 17, 18, & 19mm
#SKT-80019 SPECIAL
w/ FREE 8v Compact Flashlight MSRP $464.78
• Motion Activation variable speed & reversing control SPECIAL $24.99
for precise fastening control
• Adjustable 2-position handle $299.99 3-48 VOLT
• Battery State of Charge on Tool #AST-7764
• Quick Bit Change, holds 1" bit tips.
• No Load Speed: 0-430 rpm SPECIAL
• Drive: 1/4" hex
• Includes: (2) batteries, 1-hr charger, $29.99
& kit bag.
FREE #DCL023X 7pc SAE Set Waterproof Flex Light
Sizes: 3/8, 7/16, 1/2, w/ Magnet Base & Hook
+ 80 Lumens, 5hr Runtime. 9/16, 5/8, 11/16, & 3/4in
(A $40.76 Value) #SKT-80049  This light Ideal for Hands-Free Use.
MSRP $275.96  The can be bent, folded, and wrapped/hooked around
#DWA-DCF680N2 SPECIAL objects; or it can be placed on a flat surface and used
MSRP $222.73 as a freestanding light.
SPECIAL $179.99  Max Light Output: 60 Lumens
+ (21) LEDs w/ (3) Light Settings
$119.99  Made of water proof silicone
 Powered by 3xAAA Batteries

#AST-21FX
SPECIAL

$19.99

Compact Angle Impact Wrenches PowerSockets™

100 PIECE SECURITY HEX BIT SET  Max Torque: 220 ft-lbs  Patent-pending designs provides 50% more reverse
 Socket Retention: Friction Ring torque for 1/2” impacts!
 Essential for car, machine tool,  Impact Mechanism: Jumbo Hammer
household appliances, and  Dimensions: 9.8" (L) x 3.46” (W) #ING-S64M17L-PS1 $74.99
electronics repairs.  Weight: 2.46 lbs #ING-S64M19L-PS1 $74.99
 Chrome vanadium adapters #ING-S64M21L-PS1 $74.99
w/ satin finish. #CPT-7727 (3/8”) #ING-S64M26L-PS1 $79.99
#ING-S64M27L-PS1 $79.99
#AST-9448 #CPT-7737 (1/2”)
MSRP $350.00
$19.99 SPECIAL
YOUR CHOICE

$249.99

TM Non-Break Powder Free Nitrile Non-Break Powder Free Nitrile
BLACK LIGHTNING GLOVES ORANGE LIGHTNING GLOVES
Magnetic Glove Dispenser
 Made to match healthy skins natural 5.5ph levels to ensure OPTIMUM  Exact same glove as the Black Lightning,
 Magnetic glove dispenser attaches to your COMFORT! The unique formula reduces But NOW in SAFETY ORANGE COLOR to help
tool box. perspiration while remaining non-breakable. eliminate unwanted grease & oil smudges on vehicles.
 Two large magnets hold the dispenser in  Textured Fingertips, for better wet & dry gripping.  Box of 100
place.  Box of 100
 Fits all common sizes #LIG-ORS (Small)
of disposable rubber #LIG-BLS (Small) #LIG-ORM (Medium)
glove boxes. #LIG-BLM (Medium) #LIG-ORL (Large)
#LIG-BLL (Large) #LIG-ORXL (X-Large)
#LIS-20130 #LIG-BLXL (X-Large) #LIG-ORXXL (XX-Large)
#LIG-BLXXL (XX-Large)
MSRP $29.65 $16.99
SPECIAL $16.99

$24.99

M-PACT™ Gloves Classic Mechanics Gloves Hand / Tool Wipes
w/ Dual Texture
 Sonic Welded Rubber Top provides impact protection for knuckles &  Clarino Synthetic Leather Palm & Fingertips help extend the glove life..
fingers.  Thermal Plastic Rubber Hook & Spandex Loop Cuff provides flexibility. Designed specifically for the automotive
 EVA Foam Palm Pads, absorb punishment.  Reinforced Index Finger. technician!
 TPR Cuff & TPR-Lined Fingers.
MEDIUM  Rough Abrasive Side breaks loose the
MEDIUM #SKT-SKA100002 toughest grit and grime.
#SKT-SKA100012 LARGE  Absorbent Side pulls away vs. moving
LARGE #SKT-SKA100003 around.
#SKT-SKA100013 X-LARGE  Breaks down grease and oil w/out leaving
X-LARGE #SKT-SKA100004 behind residue.
#SKT-SKA100014  Canister comes w/ 86 wipes.
SPECIAL *Also Available in Single Display Packs.
SPECIAL
$39.99 #SKT-SKWIPES1
$44.99
SPECIAL
Air Wedge Lockout Tool Camo Utility Blanket 26pc Precision
Bit & Driver Set $19.99
 Designed to create working room around the • Dimensions: 72" x 80"
window frame when using other lockout tools. • Shell is made of non-woven synthetic fibers • Features: Color Coded, 1-Click Release, Rechargeable Underhood
 Adjustable inflation & release valve provides • Filler material made of recycled denim cotton Push-Button Eject, & Rotatable Tool Tray. Work Light
versatile use. • Weight: 3.5lbs • Set Includes: (4) Phillips, (2) Pentalobe,
(5) Slotted, (7) Hex, (6) STAR, plus Extends from 48” to 77”!
#OTC-4449 #TIT-22017 (1) Magnetic bit holder, & (1) Aluminum Bit
Driver Output: 330 Lumens (Full) / 150 Lumens (1/2)
SPECIAL SPECIAL  Run-time: 3.5 (full power) / 6.5 (1/2 power)
#TIT-16028  Each Handle has: Power Switch, 3-Magnets,
$39.99 $16.99 SPECIAL hooks.
 Package Contents: AC and DC Power Supply/
$24.99 Charger
 Rotates 360° in the cradle or can be removed.
Parts Wash Brush Adjustable Water FIREFIGHTER STYLE
w/ Flow Through Handle Spray Nozzle Water Spray Nozzle #SMA-SLR2120
MSRP $158.81
Includes 27” Flow Through Tube!  Attaches to any garden hose.  Attaches to any garden hose. SPECIAL
 Twist action adjustable valve for  (3) Spray Patterns: Gentle shower, Medium
 Injection Molded Polypropylene Handle variable water streams. spray or High power jet. $114.99
w/ Synthetic Filaments, resists solvent cleaners. *Available in 6pc Display Pack *Available in 6pc Display Pack

 Length of Bristles: 2” x 1-3/8” diameter #TIT-11091 #TIT-11090

#BRM-PWA SPECIAL SPECIAL

MSRP $23.86 $14.99 $9.99
SPECIAL

$19.99

PREMIUM GARDEN HOSES Electronic Safety Earmuffs 12V MINI Air Compressor
#LEG-HFZG505YW #LEG-HFZG550YW
 Extreme all-weather flexibility.  Independent Volume Control. • Great for inflating car/ bicycle tires,
(5/8” x 5ft)  Lightweight and coils easily. (5/8” x 50ft)  AUX jack for MP3, Cell phones and 2-way sports balls, & air mattresses
radio.
$14.99  NO MEMORY - lays flat! $49.99  NO wires! • Fills a Completely Flat Tire in just over 6mins!
 Abrasion resistant. • Power: 12V DC (9ft power cord)
#LEG-HFZG510YW #LEG-HFZG575YW #AST-7661 • Max. Pressure: 250PSI
 Won’t kink under pressure! • 18" Air Hose & Pressure Gauge w/ 3M Wire
MSRP $43.65 • (2) Nozzle Adapters & (1) sports needle
(5/8” x 10ft)  Crush resistant, 3/4” - 11.5GHT fittings (5/8” x 75ft) SPECIAL
#TIT-55200
$24.99 $69.99 Max. working pressure at 70° F: 150 psi $34.99 MSRP $14.99
 Drinking water safe! SPECIAL

$14.99

R-134A RECYCLING UNITS The Most Advanced & User Stops refrigerant leaks in automotive air TM
Friendly R134a Digital conditioning systems,
Simple Operation w/ Superior Accuracy. Manifold on the Market! quickly & permanently. R-1234yf
A/C Manifold Gauge Set
• All units recover, recycle, evacuate, & • Large easy to read LCD displays temperature, • Non-polymer, oil-soluble formula is safe for
recharge R-134A quickly and accurately. pressure, & vacuum readings for R134a. A/C system components and recovery • Highly visible 3-1/8” Gauges (Bar/PSI)
• All Units Feature: Automatic Air Purge, • Obtain refrigerant & oil capacity readings for equipment. • (3) 71” Nylon Barrier Hoses
Refrigerant Charging, Vacuum Function, 55 automobile manufactures. • Compatible with all popular refrigerants + Red & Blue = 12mm-M fitting on both sides
Refrigerant Management & Multilingual • Also performs system leak check at the systems, including R-1234yf! + Yellow = 12mm-M & 1/2”-16 ACME LH
conclusion of the evacuation process. • Seals leaks as large as 0.020 inch (0.5 mm) Features: Couplers w/ extended disconnect
Display. • Perfect preventive maintenance aid. Remains protection sleeve, & piston-type free floating
#MAC-99872A safely in system to help guard against future valves reduce o-ring wear.
#RBA-34788NI leaks.
MSRP $283.54 #MAC-83272
Additional Functions: SPECIAL **Not for use in hybrid vehicles w/
• Fully Automatic: lets you recover, vacuum leak electrically driven compressors** MSRP $244.88
test, charge, & then walk away. $209.99 SPECIAL
• Vacuum Leak Test Syringe Injector Kit
• Automatic Refrigerant Refill AC MANIFOLDS $199.99
• Automatic Oil Drain Includes prefilled, disposable syringe, hose/
Additional Features: SIDE WHEEL MANIFOLD FOR R134A coupler with check valve & adapter/purge fitting. Deluxe Dual Aluminum
• Recovers 20% Includes 72” hoses. Services 1 vehicle. A/C Manifold Gauge Set
More Refrigerant
• Charge Accuracy #RBA-45111 TRA-TP2210CS • R12/R134a Gauges w/ guards,
+/- 1/2 Ounce MSRP $185.95 • (3) 96” Hoses, Manual Couplers,
• Additional storage areas SPECIAL SPECIAL • 1/4” SAE x1/2” ACME F Adapter
for tools, extra filter, and
compressor oils $159.99 $39.99 #MAC-293996-PB-CL

MSRP $5379.95 DUAL MANIFOLD GAUGE SET 2oz Big EZ™ Cartridge MSRP $124.55
Packaged in a blow molded case Includes: SPECIAL
#MAC-69789 • Dual Manifold + Prefilled cartridge works w/ BigEZ™,
• 72” R-12 & R-134a hoses, EZ-Shot™, & most other popular $99.99
Additional Functions: • High & Low R-134a snap couplers caulking gun-style injectors.
• Fully programmable to allow for either • 1” dial thermometer. + Services up to 2 vehicles. A/C VACUUM PUMPS
automatic or manual use
• Vacuum Leak Test #RBA-47150 TRA-TP2270-0102CS • Number of Stages: 2
• Automatic Oil Drain • Free Air Displacement: 5 CFM
• Automatic Air Purge MSRP $284.95 SPECIAL • Ultimate Vacuum: 25 Microns
Additional Features SPECIAL • Motor: 1/3 hp w/ 1725rpm Pump Speed
• Recovers 95% of $49.99 • Electrical Specs: 110V - 60HZ
Refrigerant $239.99
• Charge Accuracy 2oz Bottle Leak Sealer #MAC-90065
+/- 1/2 Ounce THERMOMETERS
• Full Tank Alarm + The most economical way to add MSRP $591.24
• Low Refrigerant Alarm #RBA-10945 Cool Seal™ to an A/C system. SPECIAL
+ Requires refillable injector.
MSRP $5039.61 - Dial; 0° F to 220° F + Services up 2 vehicles. $439.99

#MAC-69789-H $14.99 TRA-TP2200-0102CS Dual-Voltage

Additional Functions: #RBA-43240 SPECIAL • Number of Stages: 2
• Works on both Hybrid and R134a vehicles • Free Air Displacement: 6 CFM
• Fully programmable to allow for either auto- - Digital Display; $39.99 • Ultimate Vacuum: 15 Microns
matic or manual use -40° F to 390° F / -40° C to 200° C • Motor: 1/3 hp w/ 3440rpm Pump Speed
• Vacuum Leak Test - Battery Saver w/ Auto Shut-Off CONDENSER FIN COMB • Electrical Specs: 110/220V - 50/60HZ
• Automatic Oil Drain
• Automatic Air Purge $29.99 • Cleans & Straightens #MAC-90066-2v-110
Additional Features condenser & evaporator fins.
• Recovers 95% of Digital Refrigerant Scale MSRP $398.75
Refrigerant • 6-sided head for: SPECIAL
• Charge Accuracy • Platform Dimension: 9” x 9” (220 lb. Limit) 8,9,10,12,14,& 15 fins per inch.
+/- 1/2 Ounce • Accuracy (+/- 0.5oz.) & Resolution (0.1oz.) $279.99
• Full Tank Alarm • Charging & Recovery capabilities. #RBA-18403
• Low Refrigerant Alarm • Power Supply: 9v Battery AIRVAC™ For both R12 & R134A.
$19.99
MSRP $5355.78 *Carrying Case #TIF9031 • Uses shop air to pull the system
Electronic Leak Detector into vacuum & includes inlet fittings
Please Call For #TIF-9030 w/ 1/4” & 1/2” Acme sizes.
Special Prices On Units! • For all CFC, HCFC & HFC Refrigerants. • Free Air Displacement of 1 CFM.
MSRP $210.95 • Uses Corona Discharge Technology.
Universal R12/R134a SPECIAL • Audible & Visual Leak detector. #RBA-34970
Master Valve Core Service Kit
$179.99 #RBA-16600 $79.99
Service valve cores w/out losing the systems
charge. Covers ALL R12 & R134a system valve Electronic Refrigerant MSRP $260.95 PREMIUM HIGH VACUUM PUMP OIL
cores for Standard, JRA, Eaton, Charging Scales SPECIAL
& GM Large Bore. • Thermally Stable - resists breaking down due
ACCU-CHARGE II $219.99 to heat for a longer period of time.
#MAC-58490 • Platform Dimension: 9” x 9” (240 lb. Capacity) • Lower Moisture Content - helps to improve
• Operating Temp: 32 to 120°F. LEAK DETECTORS the ability to reach a deep vacuum.
MSRP $220.99 • Accuracy (+/- 0.16oz.)
• Resolution (0.02lb) Both Units Detect ALL Refrigerants, #RBA-13119 (pint)
SPECIAL $179.99 & Leaks as small as 1/10oz Per Year
#MAC-98210A 2-in-1 Electronic / UV Leak Detector $4.99
A/C SYETEM FLUSH KIT • (6) Levels of Sensitivity
MSRP $291.18 & (15) Detection Levels #RBA-13203-1 (quart)
• Designed to work w/ any light weight flushing SPECIAL
agent which can be mixed w/ pressurized air. #MAC-55200 $9.99
• Remove refrigerant oil debris during retrofitting $199.99
or compressor replacement. MSRP $344.77
• Includes flush gun, hose, 220 lb Economy Scale SPECIAL
canister, & canister adapter.
#MAC-298210-CL $249.99
#MAC-91046A
MSRP $191.62 COOLRITE Economy Detector
SPECIAL SPECIAL • (3) Levels of Sensitivity
• (5) Levels of Detection
$59.99 $154.99
#MAC-55100-R-CL

MSRP $191.62
SPECIAL

$154.99

TM BALL JOINT SERVICE TOOL SETS 2 FLEXIBLE LIGHTED
PICK-UP TOOLS
6pc Deutsch Terminals Service Kit SET w/ 4-WHEEL DRIVE ADAPTERS
• Both are 24” long, and have a handy LED light w/ easy On/Off
(3) Terminal Release Tools Designed for the removal & installation of press-fit parts such as button.
ball joints, universal joints and truck brake anchor pins. Set • BLUE Model is magnetic.
#TOO18551 (Use w/ 14-16,gauge: GOLD) contains C-frame press, 3 receiver tubes, installation and remov- • Includes: Storage Case & (3)LR-44 Batteries.
#TOO18552 (Use w/ 16-18 gauge: BLUE) ing adapters. Services 1967 thru current 1/2 & 3/4 ton 4WD
#TOO18553 (Use w/ 20-24 gauge: RED) vehicles with Dana 44 front axle. #SPI-LPT1
SPECIAL
(1) Open Barrel Crimping Tool #AST-7865
MSRP $123.29 $19.99
#TOO18600 (Use w/ 14-24 gauge) SPECIAL

(2) Closed Barrel Terminal Crimpers $99.99

#TOO18880 (Use w/ 14, 16, & 18 gauge) MASTER ADAPTER SET BENCH GRINDER & STAND
#TOO18890 (Use w/ 20 & 22 gauge)
All the receiving tubes and removing/installing adapters needed 6” Bench Grinder w/ 40w Worklight
#TOO-18650 to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive
MSRP $149.95 pick-ups, vans and sport utility vehicles through 1997. Work on • Structure: ball bearing construction, cast iron base, mounting
SPECIAL press-fit upper & lower ball joints. holes, and rubber feet.
• Features: 40watt worklight, 6ft power cord,
$124.99 #AST-7868 spark guards, & adjustable eye shield.
MSRP $117.86 • Two 6" wheels (1/2" arbor): 36 grit & 60 grit
Master Terminal Service Kit SPECIAL • No Load Speed: 3450 RPM
• Power: 1/2 HP Motor, 3.5 AMP
For use On: $79.99 • Voltage: 115V / 60Hz
 Deutsch open and closed barrel terminals • Weight: 29 lbs
 Weather Pack terminals
 Metri-Pack terminals #SUN-5001A
 Other open barrel terminals MSRP $245.99
SPECIAL
#TOO-18700
MSRP $249.95 $159.99
SPECIAL
MASTER SET STAND
$209.99 • Use w/ most 6” & 8” bench grinders.
Set includes: C-Frame press that can be used to remove/replace • Sturdy base (10.5” x 7.5”) with
Ratcheting Terminal Crimping Kit universal joints, Master Adapter Set #AST7868, & also included pre-drilled holes for mounting on floors.
is the #2030-1 live center forcing screw plug. Comes in blow • Shaft Dimensions: 3” (dia.) x 26.63”
 Versatile kit includes molded carrying case. • Height x Weight: 36” x 22 lbs
(5) dies for virtually all uses.
 Quickly interchange for a #AST-7897 #SUN-5003
wide range of applications. MSRP $234.14 MSRP $127.99
SPECIAL SPECIAL
#TOO-18920
MSRP $124.95 $179.99 $89.99
SPECIAL
16 SPEED DRILL PRESS
$99.99
Inspection Camera  3/4 HP Motor w/ 5/8” Drill Capacity
220pc Interchangeable Ratcheting  Convenient Belt Tension Lever,
Terminal Crimper & Accessory Set w/ 3” Color LCD for Quick Speed Transition.
 Table Rotates 360° & Pivots 0° to 45°
 Comprehensive kit for crimping a  Equip with a 6½ ft waterproof flexible Camera Cable w/ 8mm w/ indicator to facilitate setting.
variety of Delphi Weather Pack  Power Source: 115v / 60Hz
Connectors Camera Head, & Anti–Slip Soft grip handle.  Speed Range: 200 to 3850 rpm.
 Quick interchange chromoly jaws
provide two Weather Pack ratcheting  Features; Video out, 2.5X Digital Zoom, #SUN-5000A
pliers in one! MSRP $824.99
Illumination Control, View Flip, SPECIAL
#AST-9478
MSRP $166.85 Stand Hanger w/ Hook! $539.99
SPECIAL
 Includes (3) Accessories
$129.99
+ Hook, Magnet, Mirror. C←am6-e1r/a2Cftab→le!
Ratcheting Wire Terminal Crimper
#ACD-ARZ604
• Racheting mechanism design SPECIAL
• Adjustable crimping compression
• Steel jaw $169.99
• Color coded wire sizes
red 22-18AWG-DIN 0.5-1.0mm DOUBLE CLUTCH™ Small Engine Tach/Hour Meter
blue 16-14AWG-DIN 1.5mm-2.5mm
yellow 12-10AWG-DIN 4-6mm; grip USB Rechargeable Headlamp  RPM Range: 0-20,000 rpm
 Refresh rate: 0.5 or 1 seconds
#TIT-11477 • C4® LED = up 125 lumens & 10-18hr runtime  Hours: 0-99,999 JOB hrs/ 0-200 SVC hrs
SPECIAL • Twist Facecap to change from spot to flood.
• Uses rechargeable lithium polymer battery, but it also accepts #ESI-329
$20.99 (3) AAA alkaline batteries. MSRP #37.95
• Includes USB Cord, AC Adapter, Adjustable Elastic Headstrap, SPECIAL
& Rubber Hard Hat Strap.
$33.99
#STR-61603
MSRP $85.00
SPECIAL

$59.99

BONE-STER™ by PEGUSUS BONE CREEPERS
PEGUSUS
#BHK-BH6031 The Only TM
New Mechanic‘s Creeper The Original Bone™ Creepers w/
is Comfortable, Affordable MSRP $220.80 FOLD-UP CREEPER
SPECIAL Lifetime
and Guaranteed! Warranty on Works great on off road situations and under a
$164.99 its Wheels! vehicle where no jacks or lifts are used. Folds
#BHK-BH4031 up and hangsfor convenient storage.
MSRP $169.04 #BHK-BH7031
SPECIAL Rough Rider™ #LIS-95002
MSRP $260.86 SPECIAL
$124.99 SPECIAL
$34.99
The Only $199.99
Creepers w/

Lifetime
Warranty on
its Wheels!

40” PADDED CREEPER LOW PROFILE PLASTIC CREEPERS
w/ (6) SWIVEL CASTERS
 Body Fitting Design provides optimum comfort.
 Weight Capacity: 350 lbs  Heavy Duty Pop-In Urethane Wheels provide smooth maneuverability.
 Dimensions: 40-1/8” x 17” x 4”  Dimensions: 38” (L) x 17-1/2” (W) x 4” (H). With only 7/8” floor clearance.
 Vinyl Padded Head & Back Rest
 Heavy-Duty Frame  Weight: under 15 lbs.

#PRO-C1004 STANDARD (2”) LARGE WHEEL (4”)
MSRP $54.41 #LIS-92102 (red) #LIS-92032 (Red)
SPECIAL #LIS-93102 (yellow) #LIS-93032 (Yellow)
#LIS-94102 (blue) #LIS-94032 (Blue)
$49.99 #LIS-97102 (black) MSRP $129.75
MSRP $100.05 SPECIAL
SPECIAL
$99.99
$84.99

Bigger Wheels
For a Better Ride!

DELUXE CREEPER Z-CREEPER THE TAIL BONE LOW PROFILE SEAT Creeper
MECHANICS SEAT!
• 1" Rugged steel tube construction. CREEPER TO SEAT IN ONE MOTION • The legs and wheels can be flipped over for a
• Oversize frame for added comfort. The Tri-Wheel Base not only holds 5" or 8" working height at the top of the seat
• Tapered frame & head rest.  Dimensions: 39-7/8” (L) x 19” (W) tremendous weight but also allows for cushion.
• 3-1/2" chrome casters w/ rubber tread.  Weight Capacity: 450 lbs. effortless mobility over air hoses, drop cords, • The backrest has a 3" adjustment range w/ a
• 5-Position headrest adjustment.  Fully Upholstered Pad shop clutter, rough surfaces and much more! quick-release pin, or can be removed to be used
• Rear drop frame design for extra leg comfort.  (6) 3" Polyurethane Wheels as a knee creeper.
#BHK-BH5031 • (2) locking wheels.
#SUN-8515 #BHK-BH2450 • 30" wide by 13" deep.
MSRP $281.99 MSRP $143.31 (Standard 5” Wheels)
SPECIAL SPECIAL #LIS-93502
MSRP $210.78 MSRP $124.95
$179.99 $99.99 SPECIAL SPECIAL

#OME-91452 $159.99 $99.99

* Added Chair Position #BHK-BH5131

MSRP $185.90 (Rough Rider 5⅜” Wheels)
SPECIAL
MSRP $240.86
$124.99 SPECIAL

$179.99

2-in-1 Shop Seat & Stool 3 Drawer Toolbox Creeper EZ Set Pneumatic TRACTOR SEAT
Professional Shop Seat
 Weight Capacity: 300 lbs  L x H x W): 18-1/4” x 14” x 19” • Air cylinder for easy height adjustment
 Seat Size: 14" x 7-7/8"  Weight Capacity: 450 lbs. • Five 2-1/2" casters for easy mobility • Five 3-1/2" heavy duty, chrome finished cast-
 Step Size 14" x 9"  Steel Frame Construction. • A 15-1/4" diagonal tool tray– 1" deep ers with rubber tread.
 (5) Swivel Casters, provides added stability  Front & Back Tool Trays. • 12-1/2" diagonal seat • Large, reinforced 17" diameter 1" deep tool
and mobility.  Extra-Thick Seat Cushion. • High height: 20-1/2" tray
 (4) 3" Polyvinyl Wheels. • Low height: 15-1/2"
#PRO-C2800 #SUN-8514
MSRP $67.39 #OME-92450 #SUN-8509 MSRP $201.99
SPECIAL MSRP $157.31 MSRP $108.99 SPECIAL
SPECIAL SPECIAL
$49.99 $149.99
$99.99 $79.99

TM PARASITIC DRAIN TESTER Master Inner Tie-Rod Tool Set

SHAFT IN SEAL PULLER Provides an Easy Method to Connect a Multimeter to the • Includes: 9 crowsfeet to work on many applications on cars & light trucks,
Vehicle Electrical System to Diagnose Battery Drain. w/ sizes: 29mm, 1-3/16", 1-1/4", 32.5mm, 1-5/16", 33.6mm, 1-3/8", 1-7/16",
Removes cam shaft and crank shaft seals and 1-1/2". The inner tie rod can be removed and installed w/out removing
without damage to the shaft. • Replaceable in-line fuses protect both the meter and tester the rack.
in the event a high current source on the vehicle is left on.
#LIS-58430 • Tester & meter can remain connected until other #LIS-46800
SPECIAL computer systems shut down, isolating the drain. MSRP $149.95
SPECIAL
$19.99 #LIS-64970
MSRP $32.95 $129.99
SPECIAL

$29.99

PUSH PIN PLIERS COIL-ON SPARK TESTER Small Fastener Remover Fuel Tank Lock Ring Tool

For Easy Removal of Plastic Push Pin Type Fastest way to test no-start conditions For Use with a Pneumatic Impact Tool to • Remove & install plastic fuel tank lock rings
Panel Fasteners w/ Center Pins. • Gad Meausements =from 0 to 40k Loosen Rusted or Seized Fasteners. from 4” to 7-1/4” w/out damage .
• The 12” ground wire, comes w/ shielded clip. • Channel Design allows legs to adjust to fit a
• Pointed tips will not damage pin or anchor. • A 3/4" open end wrench is used to turn the wide range of applications and keeps the drive
• OAL of 7-1/2". #LIS-20700 socket while impacting the fastener. centered.
SPECIAL • Includes: Phillips #1, #2, #3, #4 & a straight bit.
#LIS-41250 #LIS-63000
SPECIAL $19.99 #LIS-60530 MSRP $49.95
MSRP $46.95 SPECIAL
$19.99 Deutsch Terminal Tool SPECIAL
$39.99
4pc Wire Terminal Tool Kit Works on OEM Electrical Connectors Used on $29.99
variety of vehicles & equipment. 5pc Oil & Fuel Filter
• Remove wires from terminals w/out Wire Insertion Tool Set Socket Set
damage. - Kenworth & Peterbuilt Trucks, Harleys.
• Work on conventional terminals, Pack-Con and - Caterpillar and industrial connecters. Use for Installing Wires on Audio  Low profile design to fit tight areas.
Weather-Pack terminals (GM vehicles), plus Electronics, Aftermarket Lighting, & Alarm  Includes; 3/8” drive 6 point 24mm,
many Ford applications. #LIS-59600 27mm, 29mm, 32mm & 35/36mm
• The handle slips over the probes to protect the MSRP $32.95 Systems. sockets.
technician's hand as well as to provide extra SPECIAL • Includes (2) Wire Insertion Tools w/ 10-1/2”
leverage. steel tubes: 1/4" O.D. and 3/8" O.D. #LIS-13300
$24.99 MSRP $50.85
#LIS-57750 #LIS-61030 SPECIAL
MSRP $60.95 MSRP $29.95
SPECIAL SPECIAL $39.99

$49.99 $24.99

Fan Clutch Wrench Sets Broken Spark Plug Remover 9pc Brake Lining M14x1.25 SPARK PLUG

7pc PNEUMATIC SET Ford Triton 3-Valve Engines Thickness Gauges HOLE REPAIR KIT

Use w/ Air Hammer. Set Includes a Unique Porcelain Pusher Tool, Allows Brake Pad Wear to be Accurately and  Includes drill tap, long & short tap holders,
that removes broken spark plugs from 2004 & Consistently Measured without Guessing. insert installer, swedger, and handle.
#LIS-43300 newer Triton 3 valve per cylinder engines. Plus (3) insert sizes: 5/16", 7/16", & 11/16".
MSRP $216.95 • Color-coded gauges match SAE or Metric
SPECIAL
#LIS-65600 rec.’s for brake pad replacement. #LIS-65000
$169.99 MSRP $109.95 • Check both straight on or a 90° angle to the MSRP $131.95
SPECIAL rotor with offset tips. SPECIAL
3pc UNIVERSAL SET
$89.99 #LIS-81850 $119.99
Includes: water pump pulley wrench, spanner MSRP $25.73
wrench, and double-ended turning wrench.
Use w/ 1/2” ratchet or breaker bar. SPECIAL

#LIS-43600 IPR Socket for Ford Diesel $19.99 Import Car Filter Wrench
MSRP $82.95
SPECIAL • Remove & replace the injector  Removes ALL Oil Filters

$64.99 pressure regulator (IPR) on Ford 6.0L, Interna- Clutch Pilot Bushing Remover from 2-1/2" to 3-1/8" in
tional, and other diesel engines. diameter.
A/C & FUEL-LINE • Tool is built to bottom out on the hex  Uses hydraulic pressure to remove brass and
DISCONNECT SETS so it does not put torque on connector. bronze brushings from 1/2” to 3/4” ID. #LIS-63600
• 3/8" square drive.  Self-Tapping Tip w/ 2-3 threads. MSRP $12.95
#LIS-37000 (6pc) SPECIAL
#LIS-68210 #LIS-55600
• Easy to use in confined spaces. MSRP $34.95 SPECIAL $9.99
• Disconnects Spring Lock Couplings. SPECIAL
• Sizes: 5/16", 3/8", 1/2", $11.99 17pc MASTER
5/8", 3/4" & 7/8". $29.99 End Cap Filter Wrench Set
STUCK BOLT, NUT &
SPECIAL HEAVY-DUTY BEARING STUD REMOVER SET - For use on the Most Popular
RACE & SEAL DRIVER SET Domestic & Import Vehicles.
$9.99 Removes stuck studs, rounded bolts and nuts - New Design, w/ improved
• Fits most Class 8 vehicles, plus some medium- from sizes 1/4" to 9/16" (6mm to 14mm). The welds for added strength.
#LIS-39400 (6pc Angled) duty vehicles. remover spline cuts into the bolt head or threads
• Includes (6) drivers and handle extension for for a sure grip. #LIS-61500
• Also Connects Fuel Lines. driving bearing races and seals on hubs with
• Sizes: 5/16", 3/8", 1/2",5/8", deep brake drums without removing the drums. #LIS-19250 MSRP $159.45
3/4" & 7/8". • Driver sizes: 3-43/64", 4-7/8", 4-13/16", 5-1/2", MSRP $52.75 SPECIAL
5-25/32", and 6". SPECIAL
SPECIAL $124.99
$39.99
$19.99
#LIS-61900 Multi-Position Magnetic Cup SIZES
#LIS-39900 (19pc) MSRP $249.95
SPECIAL • 6" diameter cup, made of ABS plastic. 65mm - 14 flutes 65/67mm - 14 flutes
• Combines both the • Strong, magnetic base has a coating to protect 68mm - 14 flutes
above kits, plus $199.99 work surfaces, & is oil resistant. 74/76mm - 14 flutes 73/74mm - 14 flutes
specialty disconnects. • Angled design: numerous 76mm - 15 flutes
positions, & holds up to 82mm - 15 flutes 76mm - 14 flutes
MSRP $71.45 5-lbs in a vertical position. 86mm - 15 flutes
SPECIAL 93mm - 30 flutes 80mm - 36 flutes
#LIS-67300 93mm - 18 flutes
$49.99 SPECIAL - 15 flutes 86mm

$19.99 - 16 flutes 88.4mm

- 15 flutes 93mm

- 45 flutes 96mm

100mm - 15 flutes

BMW Specialty Sockets 3/8” Drive Oil Filter Thread Restoring Files TM
Wrenches
Spark Plug • Restores threads on bolts & shafts. 5pc Rethreader Die Sets
STANDARD CAP-TYPE • Files are cross-cut & depth proportional to the
• Specs: 3/8” drive, 14mm x 12-point, 2-1/2” thread pitch. #CTA-8250 (NC-Coarse)
OAL. • Precision-stamped to remove Aftermarket & • All are 7/16” square x 8-3/8” long.
• Thin-Wall socket services BMW ‘07 & up 335, OE spin-on filters and housings. • 3/4”, 7/8”-9, 1”-8, 1-1/8”-7, & 1-1/4”-7
535 3.0L #CTA-8231 (Metric)
#CTA-A267 #CTA-8255 (NF-Fine)
#CTA-2376 Sizes: 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, & 3mm
SPECIAL • Size: 74.5mm (14 flutes) • 3/4”, 7/8”-14, 1”-14, 1-1/8”-12, & 1-1/4”-12
#CTA-8233 (SAE)
$6.99 #CTA-A268 SPECIAL YOUR CHOICE $29.99
Sizes: 11, 12, 13, 14, 16, 18, 20, & 24 TPI
Head Bolt • Size: 84mm (14 flutes) 53pc Universal
#CTA-8235 (SAE) Rethreading Kit
• Specs: 1/2” drive, E-12 torx, 6” OAL SPECIAL YOUR CHOICE
• Fits cylinder head bolts on Sizes: 9, 10, 12, 16, 20, 27, 28, & 32 TPI • Includes (2) Thread Files, plus the following:
M42 & M50 engines. $4.99 TAPS & DIE SETS
SPECIAL YOUR CHOICE • MM: 6x1, 8x1.25, 8x1.5, 10x1, 10x1.25, 10x1.5,
#CTA-9259 CAP-TYPE for Toyota, Lexus, & Scion 11x1.5, 12x1.25, 12x1.5, 12x1.75, & 14x1.5
SPECIAL $14.99 • NC-USS: 1/4”-20, 5/16”-18, 3/8”-16, 7/16”-14, 1/2”-
• Size: 64mm (14 flutes) 13, & 9/16”-12
$19.99 • Extra “step” w/ 6-notches to engage tabs on 25-Blade 12” Feeler Gauge • NF-SAE: 1/4”-28, 5/16”-24, 3/8”-24, 7/16”- 20, 1/2”-
Filter Housing Caps to spread torque loads & 20, & 9/16”-18
GM Torsion Bar prevent damage. • For Long Reach Applications. DIES ONLY
• Sizes Include: .0015, .002, .003, .004, .005, • Metric: 6x1.25, 7x1, & 8x1
• Holds torsion bar during adjustment. #CTA-2465 .006, .007, .008, .009, .010, .011, .012, .013, • NC-USS: 5/8”-11
• Services ’88 – ’03 GMC and Chevrolet 1/2-ton, SPECIAL .014, .015, .016, .017, .018, .019, .020, .021, • NF-SAE: 5/8”-18
3/4-ton & 1-ton pickups, S-10 Blazer, S-15 .025, .027,
Jimmy, 4WD pickups w/ 4.3L V6 engine & $24.99 .030, and .040-inches #CTA-8240
’91 – ’01 Olds Bravada. MSRP $179.95
BI-DIRECTIONAL SPIDER-TYPE #CTA-A311 SPECIAL
#CTA-4040
MSRP $99.95 • For removal & installation of filters. $19.99 $154.99
SPECIAL
#CTA-2507 5pc 3/8” Drive Safety Hammer
$89.99 MOR-TORQ Socket Set
• Low profile works in tight areas. • This Tool will Breaks Glass &
Nut Splitter • Angled legs to bite into filters.  Service new fasteners found on many GM Cuts Seatbelts, in order to get you
• Range: 50-95mm models used in a variety of applications. out of your car an emergency.
• Splits rusted or seized nuts up to • Lightweight handle w/ double-headed
3/4” / 19mm across flats. SPECIAL + Bell Housings, Interior & Body, hammer and recessed razor.
• Offset, forged body w/ swivel head. Door Frames, Brake Rotors & more.
• Use w/ 3/4” hex drive tools. $14.99  Includes Sizes “0”, “1”, “2”, “3”,“4”. #CTA-10600
SPECIAL
#CTA-9015 #CTA-2508 #CTA-8140
MSRP $18.95 $9.99
SPECIAL • Range: 60-120mm SPECIAL $49.99

$14.99 SPECIAL

$24.99

CV Joint Puller

• Pulls CV Joints w/ hidden retaining rings w/out
damaging the roller bearing inside the joint
• Use w/ an Axle Puller (5/8”-18).

#CTA-4245
MSRP $25.95
SPECIAL

$21.99

Stud Remover & Installer Adjustable 9pc OIL FILLING SYSTEM
Gland Nut Wrenches
• Fits hard-to-reach areas. Great for many late model vehicles w/ internal baffles.
• Range: 1/4” to 3/4” / 6-19mm #CTA-8600  Allows for Fast Oil Filling w/out Spillage & Includes the Following:
• Use w/ 1/2” drive tools. + 2-Liter Funnel, that fits adapters for a wide application range.
• Fits hydraulic cylinders on vehicles + Color-Coded Adapters, fit oil filter hole.
#CTA-9011 from 1” to 3-3/4” / 25mm to 95mm. + Special angled extension w/ swivel feature
MSRP $29.95 • Reverses to work on 1/4” or 7/32” allows access in hard-to-reach applications.
SPECIAL pinholes.
#CTA-7470
$24.99 • 1/2” drive. MSRP $149.95
SPECIAL
SPECIAL $114.99
$29.99

Extraction & Filling Pumps #CTA-8605 FUEL INJECTION RADIATOR
CLEANING CANISTER PRESSURE TESTER
Works with all types of Automotive Fluid, • Fits hydraulic cylinders on vehicles
including Brake Fluid! from 2” to 6” / 51mm to 152mm. Canister is filled w/ cleaning fluid & Includes: pump w/ 30 PSI gauge, 12” hose and
• Reverses to work on 17/64” or 21/64” pinholes. attached to gauge head and adapters to cap adapter to check 3/4” deep filler necks, &
• Cylinder body is calibrated (English & Metric) • 3/4” drive. enter fuel system & injectors. 1/4” Spacer Washer for testing 1” deep filler
and is clear for viewing volume & fluid condition.  INCLUDES: 3.5” gauge w/ dual calibration (5- necks, plus (3) Radiator Adapters.
• Disassembles for easy cleaning, SPECIAL 145PSI / 25-1000kPa), and 5ft x 1/8” NPT hose
*3pc Hose Adapter Kit assembly. *Multiple System
Sold Separately #7079 $49.99  USE: w/ shop air to clean and remove & Cap Adapters
deposits from fuel injectors, passages & intake Sold Separately
#CTA-7075 Pin Spanner Set valves.
 RESULTS: in better #CTA-7050
- Capacity: 200cc / 0.22qt • Includes (4) pairs of interchangeable 2-sided engine performance, MSRP $209.95
- Includes spring-loaded pins, providing (8) different sizes. lower emissions,
detachable tube w/ cap. • Thumb-Screw Design, expands range from smoother idling & SPECIAL $164.99
25/32” to 3-15/16”(2-10cm). better fuel mileage.
SPECIAL • OAL: 9-3/4” (25cm)
#CTA-3360
$34.99 #CTA-8120 MSRP $260.00
MSRP $125.00 SPECIAL
#CTA-7077 SPECIAL
$199.99
- Capacity: 1500cc / 1.6qt $99.99
- Includes flow-control valve,
aluminum tip, & gripping band

SPECIAL

$59.99

TM 12v Cordless Sander / Polisher Lithium-Ion Batteries

20v Cordless • Features: 2-Speed Gearbox, Quick-Change Spindle Lock, Variable Speed Switch, Trigger-Lock, 2.0 Ah 12v Battery
1/2” Drill / Driver & Side-Handle #ING-BL1203
• Durability: Impact and Chemical resistant housing MSRP $84.00
• Features: 2-Speed Transmission, 16-Position • No-Load Speed: 0-2,200 / 0-7,600 rpm
Clutch, Electric Brake, & Adjustable Handle. • KIT INCLUDES: Sander/Polisher tool, SPECIAL
• Variable Speed Switch allows for“soft-start” (2) #BL1203 12v Li-ion Batteries, 1-hour 12v Charger,
• Max Stall Torque: 700 in/lbs 2” & 3” Sanding Backing Pads, $69.99
• Free Speed: 0-500 / 0-1,900 rpm 3” Hook-And-Loop Backing Pad & (3) Polishing Pads.
• Kits are Packaged in a HD Blow Molded Case 2.5 Ah 20v Battery -
& Includes: Drill/Driver, Charger, & #BL2010 Li- #ING-G1621-K2 Enhanced Ergonomics
Ion Battery MSRP $334.99 #ING-BL2012
SPECIAL MSRP $141.83
TOOL ONLY
#ING-D5140 $249.99 SPECIAL
MSRP $252.00
SPECIAL 12v Ratchet Wrench Kits 20v Ratchet Wrench Kits $114.99

$214.99 • Features: built in LED light, slim-line battery, • Features: VS paddle-style trigger, & in-line 3.0 Ah 20v Battery
and VS paddle-style trigger. battery, provides same reach as air ratchets. #ING-BL2010
• Max Torque: 30ft/lbs • Max Torque: 54ft/lbs MSRP $228.00
• Free Speed: 0-260 rpm • Free Speed: 0-225 rpm SPECIAL
• Weight & Length: 2.15 lb & 11” • Includes: Ratchet, Charger, & (2) #BL2012
• Includes: Ratchet, Charger, & (1) Battery, 20v Li-ion Batteries, packaged in a HD Blow $189.99
packaged in a Tool bag. Molded Case.
5.0 Ah 20v Battery -
#ING-R1120-K1 (1/4”) #ING-R3130-K22 (3/8”) For Extended Use
MSRP $294.40 MSRP $629.00 #ING-BL2022
SPECIAL MSRP $248.00
#ING-R1130-K1 (3/8”) SPECIAL
MSRP $294.40 $479.99
$199.99
1-Battery Kit 2-Battery Kit #ING-R3150-K22 (1/2”)
#ING-D5140-K1 #ING-D5140-K2 MSRP $646.00 Universal Battery Charger
SPECIAL
MSRP $414.75 MSRP $508.90 + Use with ANY 12v / 20v Li-Ion Battery
SPECIAL SPECIAL $489.99
#ING-BC1121
$314.99 $389.99 SPECIAL YOUR CHOICE MSRP $130.00
SPECIAL
$224.99
$109.99

12v 2-Battery Driver Kits 3/8” DRIVE 20v Right-Angle Impactools™ 1/2” DRIVE
#ING-W5350
• Features: 2-speeds w/ 15-position clutch, built in LED, 3-point #ING-W5330 • Max Torque: 180 ft/lbs Impacts per Minute: 3,000 ipm
rubber pads, & patent-pending soft-mount system. Max Free Speed: 1,900 rpm MSRP $510.00
• Max Torque: 205 in/lbs MSRP $488.00
• Free Speed: 0-400 / 0-1,600 rpm • KIT INCLUDES: Impactool, #BL2012 20v Li-ion Battery & Charger, SPECIAL
SPECIAL all packed in a HD Blow Molded Case.
3/8” DRILL/DRIVER $389.99
$369.99 • BUYING OPTIONS TO FIT YOUR NEEDS:
+ Optimized to work on + tool only, 1-battery units (-K12), or 2-battery kits (-K22). #ING-W5350-K12
metal & synthetic surfaces. #ING-W5330-K12
MSRP $664.13
#ING-D1130-K2 MSRP $642.43
MSRP $280.50 SPECIAL
SPECIAL SPECIAL
$494.99
$214.99 $484.99 #ING-W5350-K22

1/4” HEX SCREWDRIVER #ING-W5330-K22 Buy ANY Kit & Get a MSRP $794.36
FREE Battery #BL2012X!
+ Mag. pin-detent bit holder MSRP $772.65 SPECIAL
+ Recessed quick-change drive A $141.83 VALUE!
SPECIAL $599.99
#ING-D1410-K2
MSRP $265.50 $584.99
SPECIAL
Most Powerful 1/2” Drive 12v Cordless Impactools™
$199.99 Cordless Impactool™ in the World!
w/ FREE CORDLESS SCREWDRIVER
20v 3/8” Mid-Torque Impactool™ POWER: 780 ft-lb rev. torque & 1,100 ft-lb nut-busting torque.
DURABILITY: All-metal drive, & reinforced housing. • Features: Tuned impact mechanism & all-metal drive train,
• Max Torque: 180 ft/lbs positive-lock battery, built in LED light, 3-point rubber pads to
• Impacts per Minute: 2,900 ipm #ING-W7150 (Tool Only) protect tool, ergonomically designed small-handle grip, & patent-
• Max Free Speed: 1,700 rpm MSRP $512.00 pending soft-mount system.
• KIT INCLUDES: Impactool, #BL2012 20v Li-ion Battery, & • Max Torque: 100 ft/lbs
Charger, & Blow Molded Case. SPECIAL $379.99 • Impacts per Minute: 3,300 ipm
BUYING OPTIONS TO FIT YOUR NEEDS: • No-Load Speed: 0-2,700 rpm
+ tool only, 1-battery units (-K12), or 2-battery kits (-K22). #ING-W7150-K1 (1-Battery Kit) • KIT INCLUDES: Impactool, (2) #BL1203 12v Li-ion Batteries, 1-
MSRP $650.00 hour 12v Charger, all packed in a IR Logo Black Tool-Bag.
#ING-W5130 Buy EITHER Kit & FREE #D1410 12v Cordless Screwdriver Bare Tool.
MSRP $362.00 Get a FREE Battery SPECIAL $489.99 (A $136.80 Value)
SPECIAL
#BL2012X! #ING-W7150-K2 (2-Battery Kit) 1/4” Hex
$269.99 A $141.83 VALUE! MSRP $785.00 #ING-W1110-K2
MSRP $305.73
#ING-W5130-K12 SPECIAL $599.99 SPECIAL
MSRP $499.00
SPECIAL 5.0Ah BATTERY KITS $229.99

$374.99 1-Battery Kit 1/4” Square
#ING-W7150-K12 #ING-W1120-K2
#ING-W5130-K22 MSRP $717.00 MSRP $305.73
MSRP $629.00 SPECIAL SPECIAL
SPECIAL
$544.99 $229.99
$469.99
2-Battery Kit 3/8” Square
#ING-W7150-K22 #ING-W1130-K2
MSRP $875.00 MSRP $305.73
SPECIAL SPECIAL

$664.99 $229.99

NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc.

12v 1/4” Screwdriver Kit 12v Drill / Impact Driver Kit TM

w/ FREE 12v Flashlight w/ FREE 12v 3/8” Impact Tool 18v 1/2” Impact Wrench Kit

Includes (2) 12v Batteries, 1hr Fast Charger, Includes (2) 12v Batteries, 1hr Fast Charger, w/ FREE 18v Battery
Built-In LED & Bag. Built-In LED & Bag
Includes (2) 18v Battery, Fast Charger & Kit Box.
• Hex chuck accepts up to 1” bit tips. • DCD710 - 3/8” Drill/Driver
• (15) Clutch Settings. • DCF815 - 1/4” Impact Driver w/ LED Light • Max Torque: 300 ft-lbs (2,600 ipm)
• Speed: 0-1,050 rpm FREE #DCF813BX • No Load Speed: 1,650 rpm
FREE #DCL510X FREE #DC9096X
(A $90.68 Value) (A $163.93 Value)
(A $68.80 Value)
#DWA-DCK211S2 #DWA-DW059K-2
#DWA-DCF610S2 MSRP $466.94 MSRP $797.66
MSRP $255.89 SPECIAL SPECIAL
SPECIAL
$259.99 $399.99
$124.99

12v 3/8” Drill Driver Kit 18v 1/2” Drill / Driver Kits 18v Cordless Reciprocating Saw Kit

w/ FREE 12v Flashlight w/ FREE 18v Battery w/ FREE 18v Battery

Includes (2) 12v Batteries, 1hr Fast Charger, Kits Include: (2) 18v Batteries & 1hr Fast Charger & Kit Box. • Features: 1-1/8” stroke, (4) position keyless blade clamp, &
Built-In LED & Bag. Kits Feature: ½” Ratcheting Clutch & LED electric brake.
• Variable Speed w/ 0-3,000 SPMs.
• (15) Clutch Settings. Compact Unit • Includes: (1) Battery, Fast Charger, & Kit Box.
• 2-speed transmission, FREE #DC9096X
0-400 / 0-1,500 rpm. • Max Power: 410 units watts out (A $163.93 Value)
FREE #DCL510X • 2-Speed Range: 0-500 / 0-1,700 rpm
• Plastic Clutch w/ (17) Settings #DWA-DC385K
(A #68.80 Value) FREE #DC9096X MSRP $595.31
(A $163.93 Value) SPECIAL
#DWA-DCD710S2
MSRP $331.48 #DWA-DC720KA $299.99
SPECIAL MSRP $502.85
SPECIAL
$169.99
$224.99

12v 1/4” Impact Driver Kit Premium Unit 18v to 20v Power Converter

w/ FREE 12v Flashlight • Max Power: 450 units watts out • Compatible with MOST 18v DeWalt Tools.
• 3-Speed: 0-500 / 0-1,250 / 0-2,000 rpm • Allows for use of most 20v Batteries in 18v Tools.
Includes (2) 12v Batteries, 1hr Fast Charger, • Metal Clutch w/ (22) Settings
Built-In LED & Bag. • 360° Side Handle #DWA-DCA1820
FREE #DC9096X MSRP $71.63
• Max Torque: 79 ft-lbs (A $163.93 Value) SPECIAL
• Impacts: 0-3,400 ipm
• Speed: 0-2,450 rpm #DWA-DCD940KX $54.99
FREE #DCL510X MSRP $667.93
SPECIAL BENCH GRINDERS
(A $68.80 Value)
$299.99 Features: 36 & 60grit wheels, eye shields, spark deflec-
#DWA-DCF815S2 tor, adjustable tool resets, rear exhaust, & 12-1/2” dis-
MSRP $331.48 Dual Jobsite Charger Pack tance between wheels.
SPECIAL
w/ FREE 20v Worklight #DWA-DW756 (6”) #DWA-DW758 (8”)
$169.99  No Load Speed: 3,450  No Load Speed: 3,600
• Charges (2) DEWALT® 12V - 20V batteries. rpm rpm
12v 3/8” Impact Wrench Kit • Includes (2) USB ports. MSRP $174.00 MSRP $238.00
• Packaged w/ a DCB204 (4.0ah battery). SPECIAL SPECIAL
w/ FREE 12v Flashlight FREE #DCL040X
(A $90.05 Value) $129.99 $169.99
Includes (2) 12v Batteries, 1hr Fast Charger,
Built-In LED & Bag. #DWA-DCB102BP
MSRP $360.04
• Max Torque: 96 ft-lbs SPECIAL
• Impacts: 0-3,400 ipm
• Speed: 0-2,450 rpm $199.99
FREE #DCL510X

(A $68.80 Value)

#DWA-DCF813S2
MSRP $331.48
SPECIAL

$169.99

TM 20v 1/2” High Torque Impact Kit 20v 1/2” High Torque Brushless
Impact Wrench
20v Compact Reciprocating Saw Kit w/ FREE 4-1/2” Cutoff Tool & 4.0 Ah Battery
w/ FREE 20v Worklight & 20v 2.0 Ah Battery
Includes: (1) 5.0Ah battery, (1) Fast Charger, & Kit Bag. • Max Torque: 300 ft-lbs
• No Load Speed: 0-1,500 rpm • Brushless Motor = 57% more Runtime
• Compact design allow the user to make cuts in confined • Impacts: 0-2,300 ipm • Max Torque: 700 ft-lbs
spaces. • Includes: (2) 4.0Ah Batteries, • Impacts: 0-2,400 ipm
• Variable Speed w/ 0-2,900 Strokes per Minute Fast Charger, & Kit Bag. • No Load Speed: 0-400/1,200/1,900 rpm
• Features: (4) Position Keyless Blade Clamp, FREE #DCG412BX • Detent Pin Anvil
1-1/8” Stroke, Pivoting Shoe, & Built-in LED Light. (A $218.70 Value) • Includes: 5.0Ah XR Battery,
Fast Charger, Built-In LED & Kit Bag.
#DWA-DCS387P1 #DWA-DCF889M2 FREE #DCL040X & DCB203X
MSRP $457.62 MSRP $858.92 (A $243.99 Value)
SPECIAL SPECIAL
#DWA-DCF899P1
$299.99 $419.99 MSRP $703.98
SPECIAL

$449.99

20v Brushless Compact 20v MAX Brushless Impact Wrench 4-1/2” Small Angle Grinder
Drill / Driver Kit Combo Kit
#DWA-DWE402 (w/ Paddle Switch)
w/ FREE Bluetooth Speaker w/ FREE 20v Brushless Drill / Driver
 11amp w/ 1.8 hp Motor
• Brushless Motor = 57% more Runtime Includes: (2) 4.0Ah Batteries, 20v Work Light, Fast Charger & Kit  No Load Speed: 11,000 rpm
• No Load Speed: 0-600 / 0-2,000 rpm Bag.
• Features: (15) Clutch Settings & LED. MSRP $148.49
• Includes: (2) 2.0 Ah Batteries &  DCF899H - 1/2” Impact Wrench. SPECIAL
(1) Fast Charger + Brushless Motor = 57% more Runtime
FREE #DCR006X + 700 ft-lbs. Max Torque / 3-Speed control $119.99
(A $145.18 Value) (0-400/1,200/1,900 rpm) / 2,400 ipm
#DWA-DWE4011 (w/ Slide Switch)
#DWA-DCD790D2  DCF883 - 3/8” Impact Wrench.
MSRP $561.88 + 0-2,300 rpm / 0-2,700 ipm  7amp w/ 1.14 hp Motor
SPECIAL  No Load Speed: 12,000 rpm
FREE #DCD791B
$279.99 (A $197.99 Value) MSRP $117.64
SPECIAL
#DWA-DCK398HM2
MSRP $1,129.99 $79.99
SPECIAL

$639.99

20v 1/2” Premium Drill / Driver Kit 20v 1/2” High Torque Brushless 1/2” 7.8amp VSR Drill
Impact Wrench
• 1/2” ratcheting clutch w/ 22-settings & carbide inserts. • Features: 3-wire plug, Helical-Cut Steel, heat-treated steel
• 3-Speed Transmission w/ the following MAX RPM’s: w/ FREE 20v Worklight gears, metal gear housing, 360° side handle & 2-finger trigger.
• No Load Speed: 0-850 rpm
0-575 / 0-1,350 / 0-2,000 • Brushless Motor = 57% more Runtime • 1/2” Keyed Chuck
• Built-In LED Worklight • Max Torque: 700 ft-lbs
• Includes: (2) 4.0Ah battery, • No Load Speed: 0-400/1,200/1,900 rpm #DWA-DW235G
• Impacts: 0-2,400 ipm MSRP $186.20
(1) Fast Charger, & Box. • Hog Ring Anvil SPECIAL
FREE #DWHT70440X • Built-in LED
(A $32.00 Value) • Includes: (2) 5.0Ah Batteries, $129.99
Fast Charger, & Kit Bag.
#DWA-DCD980M2 FREE #DCL043X 1/2” 7.5amp Impact Wrench
MSRP $530.40 (A $163.56 Value)
SPECIAL  MAX Torque: 345 ft-lbs
#DWA-DCF899HP2  No Load Speed: 2,100 rpm
$325.99 MSRP $858.32  Impacts per Minute: 2,700 ipm
SPECIAL
20v XR 3/8” Compact #DWA-DW292
Impact Wrench $539.99 MSRP $336.80
SPECIAL
w/ FREE 1/4” & 3/8” Socket Set
$214.99
• Max Torque: 130 ft-lbs
• Impacts: 0-2,700 ipm 14” Abrasive Chop Saw
• No Load Speed: 0-2,300 rpm
• Includes: (2) 4.0Ah XR Batteries & w/ FREE 7.5amp Small Angle Grinder
Fast Charger, Built-In LED & Kit Box.
FREE #DWMT73804X • Powerful 15amp/5.5hp motor.
(A $67.37 Value) • No Load Speed: 4000rpm
• Quik-Change Keyless Blade Change
#DWA-DCF883M2 • Quik-Fence: allows fast angled cuts up to 45°.
MSRP $573.38 FREE #DWE4012
SPECIAL (A $118.32 Value)

$329.99 #DWA-D28715
MSRP $486.68
SPECIAL

$244.99

1/4” Dr. Wobble 1/4" Dr. 6pt Semi-Deep 48pc 1/4” Dr. TM
Extension Set SAE & Metric Socket Sets
SAE & Metric Set 60pc 1/4” Dr. SAE & Metric
#SKT-40936 #SKT-41692 (MM) Set
Includes: Ratchet, 2 Adapters,
6 pc. Sizes 1.5", 2”, 4”, 6” 10”, & 14" 12pc: 5mm to 15mm Thumbwheel, Universal, & 2 Extensions Includes:
Shallow: 3/16” - 9/16”; 4 - 15mm Ratchet, (2) Extensions {2” & 6” },
SPECIAL SPECIAL $84.99 Deep: 1/4” - 9/16”; 6 - 15mm Universal Socket, & (2) Adaptors

$79.99 Metric Sizes
Shallow: 4 - 16mm & Deep: 4 - 15mm
1/4" Dr. Metric Socket Sets 10pc 1/4" Dr. SAE #SKT-91848
Socket Sets MSRP $308.86 SAE Sizes
Shallow Shallow: 1/8” - 5/8” & Deep: 1/8” - 9/16”
Shallow SPECIAL $219.99
#SKT-1313 (6pt) #SKT-91860
#SKT-4910 (6pt) 3/8” Dr. Extension Sets MSRP $447.42
13 pc. 4mm to 15mm
10 pc. 3/16” to 9/16” #SKT-4524 (4pc) SPECIAL $299.99
SPECIAL
SPECIAL 3”, 6”, 8”, & 12” 47pc 3/8” Dr. SAE & Metric
$69.99 Socket Sets
$59.99 SPECIAL
#SKT-1340 (12pt) Includes: 7.5” Ratchet & Extensions - 3” & 6”
Deep $64.99 Shallow: 1/4” to 7/8” & 6 to 19mm
10 pc. 5mm to 14mm Deep: 3/8” to 7/8” & 10 to 19mm
#SKT-4950 (12pt) Wobble
SPECIAL #SKT-94547-12
10 pc. 3/16” to 9/16” #SKT-4537 (6pc)
$49.99 SPECIAL $249.99
SPECIAL 1.5", 2”, 4”, 6” 10”, & 14"
Deep
$89.99 SPECIAL
#SKT-1312 (6pt)
5 Piece Adapter Set $84.99
13 pc. 4mm to 15mm
1/4” F x 3/8” M, 3/8” F x 1/4” M, 3/8” F x 1/2” M, #SKT-4538 (8pc)
SPECIAL 1/2” F x 3/8” M, 1/2” F x 3/4” M
1.5", 3", 4", 6", 8", 10",
$119.99 #SKT-4506 18", & 19.5”
MSRP $67.12
Flex SPECIAL SPECIAL

#SKT-1335 (6pt) $49.99 $129.99

10 pc. 5mm to 14mm

SPECIAL

$189.99

3/8" Dr. Metric Socket Sets 3/8" Dr. SAE Socket Sets 47pc 1/2” Dr. SAE & Metric

Shallow Shallow Socket Set #SKT-94549

#SKT-3919 (6pt) #SKT-4613 (6pt) Includes: 10.3” Ratchet & (2) Extensions - 2” & * 1.5” Thumbwheel Ratchet
5” & Universal Joint
19pc: 6mm to 24mm 13 pc. Sizes: 1/4” to 1” Shallow: 1/2” to 1-1/8” & 10 to 24mm
Deep: 1/2” to 15/18” & 10 to 19mm SPECIAL $234.99
SPECIAL SPECIAL
25pc 3/4” Dr. 12-POINT
$134.99 $79.99 SAE Set

Deep Deep #SKT-4147 Set Includes:
• 18” Pro Ratchet & 18” Sliding T-Handle
#SKT-1854 (6pt) #SKT-4413 (6pt) #SKT-4147-6 (6 points) • (3) Extensions w/ OAL’s of 3”, 8”, & 16”
MSRP $639.21
14pc. 6mm to 19mm 13 pc. Sizes: 1/4” to 1” SPECIAL YOUR CHOICE • (20) Shallow Sockets: 7/8” - 2-1/4”
• All Packaged in a Blow Molded Case.
SPECIAL SPECIAL $439.99
#SKT-4725
$129.99 $129.99 MSRP $1315.16
SPECIAL
#SKT-1871 (12pt) Flex
$789.99
11pc. 9mm to 19mm #SKT-4607 (6pt)

SPECIAL 7pc. 3/8” to 3/4”

$99.99 SPECIAL

Flex $139.99

#SKT-3910 (6pt) #SKT-4609 (12pt)

10 pc. 10mm to 19mm 9pc. 1/4” to 3/4”

SPECIAL SPECIAL

$214.99 $184.99

19pc 1/2" Dr. Metric 21pc 1/2" Dr. Metric 12pc 1/2" Dr. SAE Deep 1/2” Dr. Extension Sets
Shallow Socket Sets Deep Socket Sets Socket Sets
#SKT-40165
#SKT-1959 (6pt) Includes Sizes: 10mm to 32mm #SKT-4822 (6pt)
5pc- 2”, 3", 5”, 10”, & 15".
Sizes: 10mm to 28mm #SKT-1947 (6pt) Sizes: 1/2” to 1-1/4”
SPECIAL SPECIAL
SPECIAL MSRP $259.18
$294.99 SPECIAL $89.99
$199.99
#SKT-1951 (12pt) $179.99 #SKT-40208 (Wobble)
#SKT-1919 (12pt) SPECIAL
5pc- 2”, 3", 5”, 10”, & 15".
Sizes: 10mm to 28mm $324.99
SPECIAL $109.99
SPECIAL $189.99

TM Pipe Plug Socket Sets 9 Piece Chrome & Impact 7pc Universal & Adapter
Universal Adapter Set Impact Set
Impact Extension Sets #SKT-19781 (3/8” Drive 11-piece)
(5) Chrome Adapters: Adapters: 3/8”F x 1/2”M; 1/2”F x 3/8”M;
#SKT-45674 (3/8”dr 3pc) + Male Sizes: 3/16” to 3/8” + 1/4”F x 3/8”M, 3/8”F x 1/4”M, 3/8”F x 1/2”M, 1/2”F x 3/4”M; & 3/4”F x 1/2”M
+ Female Sizes: 1/4” to 3/8” Universal Joints: 1/4”, 3/8”, 1/2”.
Length: 3”, 6”, & 10” 1/2”F x 3/8”M, & 1/2”F x 3/4”M
SPECIAL (2) Chrome Universal Sockets: #SKT-4519
SPECIAL MSRP $214.99
$124.99 + 1/4” & 3/8” SPECIAL
$44.99 (2) Impact Universal Sockets:
#SKT-19798 (1/2” Drive 8-piece:) $149.99
#SKT-46164 (1/2”dr 4pc) + 3/8” & 1/2”
+ Male Sizes: 1/4” to 5/8”
Lengths: 2”, 3”, 5”, & 10” #SKT-4010
SPECIAL MSRP $244.24
SPECIAL SPECIAL
$109.99
$69.99 $169.99

1/2” Dr. Swivel Impact Sets 3/4" Drive 20 Piece 40pc 3/8" Dr. SAE & MM, 1/2" Dr. Shallow & Deep

#SKT-34300 (13pc) Shallow Socket Sets Shallow & Deep Impact Set Impact Socket Sets

SAE- 1/2” to 1-1/4” #SKT-84420 (SAE) Includes; #SKT-4051 (28pc SAE)
- SAE: 5/16”, 3/8”, 7/16”, 1/2 ”, 9/16”, 5/8”,
#SKT-34350 (15pc) - 5/8” to 2” 11/16”, & 3/4” Shallow & Deep Sizes: 3/8” to 1-1/4”
- METRIC: 8mm to 15mm, & 17mm to 19mm
Metric- 10mm to 24mm SPECIAL SKT-4053 (30pc MM)

$489.99 #SKT-4090 Shallow Sizes: 8mm to 24mm
MSRP $352.10 Deep Sizes: 10mm to 24mm
#SKT-84419 (MM)

- 17mm to 46mm

SPECIAL

$514.99

SPECIALYOUR CHOICE SPECIAL $239.99 SPECIALYOUR CHOICE

$329.99 1/2” Dr. Metric $249.99
Impact Sets
10pc Impact E-Torx Set 19pc 1/2” Dr. SAE 3/8” Dr. SAE
Impact Sets #SKT-4037 Swivel Impact Sets
1/4” sizes: E4, 5, 6, 7, & 8
3/8” sizes: E10, 12, 14, & 16 Includes Sizes: 3/8” to 1-1/2”. 25pc-8mm to 36mm #SKT-33300
1/2" sizes: E18
#SKT-4039 SPECIAL 8pc- 5/16” to 3/4”
#SKT-19760 SPECIAL
MSRP $128.27 $214.99 SPECIAL
SPECIAL $199.99
$164.99
$89.99

1/2" Drive 3 Piece #SKT-4049 (Deep) #SKT-4047 (Deep) #SKT-33329 (Deep)
SPECIAL
Flip Impact Socket Set 26pc-10mm to 36mm 7pc- 3/8” to 3/4”
$269.99
Includes (2) flip sockets: 3/4" to 13/16" & 19mm SPECIAL SPECIAL
to 21mm, plus a 3" deep impact extension w/
ball retainer. $364.99 $169.99

#SKT-4043 12pc 3/8” Dr. Metric 3/4" Drive 20 Piece SAE 10pc 3/8” Dr. Metric
MSRP $69.33 Impact Sets Deep Socket Sets Swivel Impact Sets
SPECIAL
Includes Sizes: 8mm to 19mm. #SKT-87920 Includes Sizes: 10mm to 19mm.
$49.99
#SKT-4062 - 5/8” to 2” #SKT-33351
2pc Tie-Rod Impact Socket SPECIAL SPECIAL
Set SPECIAL
$79.99 $169.99
• Provides increased strength and avoids round- $674.99
ing rusted or damaged fasteners. #SKT-4082 (Deep)
• SureGrip Hex Design, drives the side of the SPECIAL #SKT-35420 #SKT-33375
hex, not the corner. (Deep)
$99.99 * 12pt Thin Wall SPECIAL
#SKT-84685 - 3/4” to 2”
MSRP $144.51 $229.99
SPECIAL SPECIAL

$99.99 $649.99

12pt SAE & Metric 3/8" Hex Bit Sets 9pc 3/8" & 1/2” TM
Combination Wrench Sets Hex Bit Sets
#SKT-19706 (MM) Torx Bit Sets
15pc SAE SET #SKT-19734 (MM)
12pc: 2mm to 12mm 1/4” & 3/8” Drive 10pc Set
Sizes: 1/4” - 1” 3/8” dr: 4,5,6,7,8, & 10mm
SPECIAL 1/2” dr: 12, 14, & 17mm 1/4”: T10, T15, T20, T25, T27, & T30.
#SKT-86255 3/8”: T40, T45, & T50.
SPECIAL $144.99 SPECIAL
#SKT-84209
$239.99 #SKT-19722 (SAE) $129.99 SPECIAL

15pc METRIC SET 12pc: 1/16” to 3/8” #SKT-19733 (SAE) $99.99

Sizes: 8-22mm SPECIAL $124.99 3/8” dr: 5/32” to 3/8” Multi-Drive 12pc TAMPER-PROOF Set
1/2” dr: 1/2” to 5/8” 1/4”: T7, T8, T10, T15, T20, T25, T27, & T30.
#SKT-86265 Long 3/8”: T40, T45, T50, & T55.
SPECIAL #SKT-19726 (MM) SPECIAL
6pc: 4mm to 10mm #SKT-19768
$219.99 SPECIAL $114.99 SPECIAL

7pc STUBBY SETS $89.99 1/2" Hex Bit Sets $124.99
#SKT-86237
$79.99 #SKT-19728 (SAE) #SKT-41427 (MM) Multi-Drive 12pc Torx-PLUS Set
(SAE: 3/8” - 3/4”)
7pc: 1/8” to 5/16” 7pc: 6mm to 19mm 1/4”: T8, T10, T15, T20, T25, T27, & T30.
#SKT-86247 3/8”: T40, T45, T50, & T55.
SPECIAL $99.99 #SKT-41227 (SAE) 1/2": T60.
(METRIC:10 - 18mm)
BALL-END 7pc: 5/16” to 3/4” #SKT-84232
SPECIAL YOUR CHOICE #SKT-19756 (MM) SPECIAL
YOUR CHOICE
13pc 6pt Long Pattern 6pc: 3mm to 10mm $159.99
Combination Wrench Sets $124.99
#SKT-19766 (SAE) 1/4" Hex Bit Sets
Packaged on a Rack Long
6pc: 5/32” to 3/8” #SKT-41455 (MM) #SKT-19732 (MM)
#SKT-86017
SPECIAL YOUR CHOICE 5pc: 8mm to 17mm 6pc: 2mm to 5mm
(SAE:1/4" - 1")
$74.99 SPECIAL
#SKT-86127 #SKT-41255 (SAE)
Long $49.99
(Metric: 7 - 19mm) #SKT-19748 (MM)
#SKT-19731 (SAE)
SPECIAL 8pc: 3mm to 10mm 5pc: 5/16” to 5/8”
YOUR CHOICE 10pc: 1/16” to 1/4”
SPECIAL YOUR CHOICE $99.99
$199.99 SPECIAL
$144.99 SureGrip®
SCREWDRIVER SETS $89.99
12pt Combination #SKT-19751 (SAE)
Super Wrench Sets • Comfortable square handle, USA MADE PLIERS
7pc: 1/8” to 3/8” for secure grip even w/ greasy hands.
18pc Standard • Long Lasting Nickel-chrome plated, 8" Crimping & Stripping Pliers
SPECIAL #SKT-7698
SAE Sizes: 1/4” to 3/4” for corrosion resistance. SPECIAL
Metric Sizes: 10mm to 18mm $99.99
#SKT-86006 (Combo) $29.99
#SKT-87018 3/8” Drive Crowfoot
MSRP $386.55 9pc: 4 Phillips & 5 Slotted 6-3/4” Needle Point Slip-Joint Pliers
Wrench Sets #SKT-7207
SPECIAL SPECIAL SPECIAL
11pc SAE Set 10pc METRIC Set
$249.99 #SKT-42265 #SKT-42365 $99.99 $19.99

(3/8” to 1”) (10MM -19MM) 1/2” to 4” Wide Capacity Pliers
#SKT-7412
SPECIAL SPECIAL SPECIAL

$179.99 $169.99 $49.99

20pc Stubby CushionGrip® #SKT-86320 (Combo)
COMBO SCREWDRIVER
SAE Sizes: 3/8” to 15/16” 6pc: 3 Phillips & 3 Slotted
MM Sizes: 10mm to 19mm SETS
SPECIAL
#SKT-86250 • Dual Durometer handle provides
MSRP $412.33 exceptional grip for ultimate comfort. $49.99
• Chrome-Vanadium steel shaft.
SPECIAL • Nickel-chrome plated for corrosion protection. #SKT-86323 (Torx)

$259.99 #SKT-86007 7pc: T10, T15, T20, T25, T27, T30, & T40
OAL = 6”
6pt Flare-Nut Wrench Sets 9pc: 4 Phillips & 5 Slotted
SPECIAL
6pc METRIC SETS SPECIAL
$79.99
Sizes: 9mm x 11mm to 19mm x 21mm. $99.99
#SKT-86324 (Extra Long Reach)
#SKT-376 #SKT-86330
#SKT-378 (15° Offset) 4pc: 1 Phillips(16” OAL) &
MSRP $154.64 6pc: 3 Phillips & 3 Slotted 3 Slotted(12” OAL)
SPECIAL
SPECIAL SPECIAL
$114.99
$49.99 $64.99
5pc SAE SETS

Sizes: 1/4” x 5/16” to 3/4” x 7/8”.

#SKT-381
#SKT-386 (15° Offset)
MSRP $126.62
SPECIAL

$94.99

TM 18pc 1/4” & 3/8” Dr. LONG STAR-BIT 12pc 1/4", 3/8" & 1/2" Dr. TORX

Super Reducer Adapter Set Socket Set Impact Socket Set

3/8”(F) x 1/4”(M), 1/2”(F) x 3/8”(M), & 3/4”(F) x 1/2”(M). The 4.5” & 8” bit lengths add reach for Includes:
recessed fasteners in confined spaces. • 1/4“ Drive: T10, T15, T20, T25, T27, T30
#SUN-2343 • 1/4” Sizes: T10, T15, T20, & T25 • 3/8“ Drive: T40, T45, T47, T50, T55
MSRP $48.99 • 3/8” Sizes: T27, T30, T40, T45, & T50 • 1/2“ Drive: T60
SPECIAL
#SUN-9928 #SUN-1820S
$39.99 MSRP $122.99 MSRP $57.99
SPECIAL SPECIAL

$89.99 $44.99

74pc 1/4” Dr. MASTER 9pc 1/4”, 3/8”, & 1/2” Dr. LONG 34pc 1/4”, 3/8”, & 1/2” Dr.
Impact Socket Set TRIPLE-SQUARE Socket Set MASTER STAR-BIT Socket Set

Includes: (10) Standard & Deep SAE: 3/16"-9/16" / The 4” bit lengths add reach for recessed fasteners • Star-Bits, T8 to T60.
(14) Standard Metric: 4-15mm / (11) Deep Metric: 5.5-15mm / (6) in confined spaces. • Tamper Proof Star-Bits, T10H to T55H.
Universal SAE: 1/4"-9/16" / (12) Universal Metric: 5-15mm / (6) • 1/4” Sizes: M4, M5, & M6 • External Star-Bits. E4 to E20.
Torx: T10-T30 / (3) Extension Bars: 2”, 4” & 6" / Universal Joint / • 3/8” Sizes: M8, M10, M12, & M14
3/8" Adapter. • 1/2” Sizes: M16 & M18 #SUN-9934
MSRP $116.99
#SUN-1874 #SUN-9929 SPECIAL
MSRP $513.99 MSRP $62.99
SPECIAL SPECIAL $84.99

$299.99 $49.99

3/8" Dr. Impact EXTENSION Set 7pc 3/8" Dr. METRIC OR SAE Hex 3/8" Dr. MASTER Impact
Driver Impact Socket Set
#SUN-3500 Socket Sets
#SUN-3647 (SAE)
4 pc. 3", 5", 10", & 15" long Both Sets Come in a Blow-Molded Case & Feature
Sizes 3/16",7/32",1/4", 5/16", Standard & Deep Sizes plus a universal joint..
SPECIAL 3/8", 7/16", & 1/2".
MSRP $79.99 25PC SAE
#SUN-3648 (MM)
$59.99 • Sizes: 5/16” to 1”
Sizes 4,5,6,7,8,10, & 12mm.
16pc 3/8" Dr. SAE & METRIC #SUN-3325
Stubby Impact Hex Driver Set MSRP $82.99
SPECIAL MSRP $174.99
Forged from high quality CR-MO steel for long life. YOUR CHOICE
SAE: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4” 29PC METRIC
Metric: 6mm, 7mm, 8mm, 10mm, $59.99
12mm, 14mm, 17mm & 19mm • Sizes: 8mm to 22mm
11pc 3/8" Dr. DRAIN / PIPE
#SUN-3646 PLUG Socket Set #SUN-3329
MSRP $70.99 MSRP $179.99
SPECIAL Male Sockets Range: 3/16” to 3/8”
Female Sockets Range: 1/4” to 3/8” SPECIAL YOUR CHOICE $129.99
$54.99
#SUN-3841 80pc 3/8” Dr. COMPLETE
MSRP $105.99
SPECIAL Socket Set

$79.99 Combining Six Sets into One!

• (8) SAE & (12) Metric Standard & Deep: 5/16” to 3/4” & 8-19mm
• (7) SAE & (10) Metric Universal Sockets: 3/8” to 3/4” & 10-19mm
• (9) Torx & (9) External-Torx Sockets: T20 to T55
• (5) Extensions: 3” [2], 5”, 10”, & 15”
• (1) Universal Joint

13pc 3/8" Dr. 3/8" Dr. SEMI-DEEP #SUN-3580
METRIC Impact Sets MSRP $447.99
Impact Socket Sets SPECIAL
Includes: 7,8,9,10,11,12,13,14,15,16,17,18, &19mm.
$269.99
#SUN-3358 (SHALLOW)
MSRP $39.99 • SAE Sizes (13pc): 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16",
3/4", 13/16", 7/8", 15/16", 1", & Universal Joint.
SPECIAL $29.99 • Metric Sizes (14pc): 8mm to 19mm, 21mm, & 22mm.

#SUN-3359 (DEEP) #SUN-3327 (SAE) #SUN-3328 (MM)
MSRP $62.99 MSRP $102.99 MSRP $91.99

SPECIAL $49.99 SPECIAL $79.99 SPECIAL $69.99

13pc 3/8" Dr. 12-POINT 12pc 3/8" Dr.SAE Impact Sets 12pc 3/8" Dr. 12-POINT
METRIC Impact Socket Sets SAE Impact Socket Sets
Sizes Include: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4",
Sizes Include: 7mm to 19mm 13/16", 7/8", 15/16" & 1". Sizes Include: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",
11/16", 3/4", 13/16", 7/8", 15/16", & 1"
#SUN-3675 (STANDARD) #SUN-3360 (SHALLOW)
MSRP $57.99 MSRP $64.99 #SUN-3674 (STANDARD)
SPECIAL
SPECIAL $44.99 MSRP $57.99
$49.99
#SUN-3682 (DEEP) SPECIAL $44.99
MSRP $77.99 #SUN-3361 (DEEP)
MSRP $85.99 #SUN-3680 (DEEP)
SPECIAL $59.99 SPECIAL
MSRP $85.99
$64.99
SPECIAL $64.99

1/2" Dr. Impact EXTENSION Sets 1/2" Dr. DRIVELINE Socket Sets

4PC STANDARD GREAT FOR MOST LIMITED ACCESS FASTENERS! TM

+ Lengths: 3", 5", 10", & 15" • Metric(9pc): 8, 10, 11, 12, 13, 14, 15, 16, & 17mm. 8pc 1/2" Dr. DRAIN / PIPE Plug
• SAE(7pc): 5/16", 3/8", 7/16", 1/2", 9/16", 11/16" & 3/4". Socket Set
#SUN-2500
#SUN-2695 (MM) • Male Sockets Range: 7/16” to 5/8”
OR MSRP $324.99 • Female Sockets Range: 7/16” to 5/8”

3PC LOCKING SPECIAL $199.99

+ Lengths: 3", 6", & 12" #SUN-2696 (SAE) #SUN-2841
MSRP $254.99 MSRP $101.99
#SUN-2501
SPECIAL $169.99 SPECIAL $74.99
SPECIAL YOUR CHOICE $79.99

39pc 1/2" Dr. Impact Sets 43pc 1/2" Dr. MASTER Impact Sets 24pc 1/2" Dr. SAE DEEP
Impact Socket Set
Both Sets Come in a Blow-Molded Case & Feature Both Sets come w/ Shallow & Deep Sockets, Universal Joint, and
(19) Standard & Deep Sizes plus a universal joint. Four Extensions (3”, 5”, 10”, & 15”), plus Blow-Molded Case. (19) Deep Sockets: 5/16” to 1-1/2”
(3) Extensions: 3”, 5”, & 10”
#SUN-2668 (SAE) #SUN-2568 (SAE) (1) 1/2” Universal Joint

• Sizes: 3/8” to 1-1/2” • Sizes: 3/8” to 1-1/2” #SUN-2824
MSRP $256.99
MSRP $359.99 MSRP $299.99 SPECIAL

SPECIAL SPECIAL $239.99 $199.99

$249.99 #SUN-2569 (MM) 12-POINT 1/2" Dr. Impact Sets

#SUN-2669 (METRIC) • Sizes: 9-30mm 14PC SAE
• Sizes: 7/16” to 1-1/4”
• Sizes: 9-24mm, 26mm, MSRP $388.99
27mm, & 30mm #SUN-2678
SPECIAL $274.99 MSRP $96.99
MSRP $285.99
13pc 1/2" Dr. SAE Impacts Socket SPECIAL $69.99
SPECIAL $199.99 Sets
13PC METRIC
19pc 1/2” Dr. SAE Sizes 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", • Sizes: 10-24mm
Impact Socket Sets 1", 1-1/16", 1-1/8", & 1-1/4".
#SUN-2679
Sets Include: 3/8" to 1-1/2”. #SUN-2650 (SHALLOW) MSRP $71.99
MSRP $70.99
#SUN-2640 (SHALLOW) SPECIAL $54.99
MSRP $137.99 SPECIAL $49.99
39pc 1/2" Dr. 12-POINT
SPECIAL $99.99 #SUN-2651 (DEEP) MASTER Impact Socket Sets
MSRP $113.99
#SUN-2641 (DEEP) (19) Standard & (19) Deep Sockets + Universal Joint
MSRP $270.99 SPECIAL $79.99
#SUN-2698 (SAE)
SPECIAL $179.99 14pc 1/2" Dr. METRIC
Impact Socket Sets Size Range: 3/8” to 1-1/2”
26pc 1/2" Dr. METRIC
Impact Socket Sets Sets Include: 10-19mm, 21mm, 22mm, 26mm, & 27mm. MSRP $348.99

Sets Include: 10-30mm & 32-36mm. #SUN-2652 (SHALLOW) SPECIAL $249.99
MSRP $68.99
#SUN-2645 (SHALLOW) #SUN-2699 (METRIC)
MSRP $181.99 SPECIAL $49.99
Size Range: 9-30mm
SPECIAL $129.99 #SUN-2653 (DEEP)
MSRP $116.99 MSRP $368.99
#SUN-2646 (DEEP)
MSRP $333.99 SPECIAL $79.99 SPECIAL $239.99

SPECIAL $199.99

20pc 1/2" Dr.HEX BIT Impact Set 29pc 1/2" Dr. DOUBLE DEEP™ 15pc 1/2" Dr. 12-POINT DEEP
Metric and SAE Impact Socket Set METRIC Impact Socket Set
10 SAE: 1/4”, 9/32”, 5/16”, 3/8”, 7/16”, 1/2”,
9/16”, 5/8”, 11/16” & 3/4” Sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", Includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,
10 METRIC: 6mm, 7mm, 8mm, 10mm, 12mm, 1", 1-1/16", 1-1/8", 1-1/4", 10-19, 21, 22, 26, & 27mm; 3/4" x 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, & 24mm
14mm, 15mm, 17mm, 18mm & 19mm 13/16" flip socket and 19mm x 21mm flip socket.
#SUN-2672
#SUN-2637 #SUN-5153DD MSRP $137.99
MSRP $193.99 MSRP $245.99 SPECIAL
SPECIAL SPECIAL
$99.99
$139.99 $169.99

10pc 1/2" Dr. HEX BIT Impact Sets 14pc 1/2” Dr. SAE UNIVERSAL 1/2" Dr. UNIVERSAL Impact Sets
Impact Socket Set
• SAE Sizes: 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", SAE Sizes (9pc): 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"
11/16" and 3/4". Includes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", & 15/16".
• Metric Sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18, & 19mm. 15/16", 1", 1-1/16", 1-1/8", 1-3/16", & 1-1/4" Metric Sizes (7pc): 13,14,15,16,17,18 & 19mm.

#SUN-2638 (SAE) #SUN-2644 #SUN-2655 (MM)
MSRP $354.99 MSRP $151.99
OR SPECIAL
SPECIAL $99.99
#SUN-2639 (MM) $229.99
#SUN-2657 (SAE)
MSRP $108.99 MSRP $190.99
SPECIAL
YOUR CHOICE SPECIAL $124.99

$79.99

TM 5pc 3/4" Dr. HEX 14pc 3/4" Dr. SAE DEEP
Impact Socket Sets Impact Socket Set
13pc 1/2" Dr. 8-POINT DEEP
SAE Impact Socket Set SAE Sizes: 3/4", 7/8", 1", 1-1/8", & 1-1/4". • Includes the most commonly used
Metric Sizes: 14mm, 17mm, 19mm, 22mm, & 24mm deep impact sockets utilized in both
Sizes: 3/8”, 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", heavy-duty & industrial applications.
13/16", 7/8", 15/16”, 1", 1-1/16", 1-1/8". #SUN-4506 (SAE) • Size Range: 3/4” to 1-5/8”
#SUN-4507 (MM)
#SUN-2858 MSRP $142.99 #SUN-4638
SPECIAL SPECIAL MSRP $263.99
YOUR CHOICE SPECIAL
$149.99
$99.99 $189.99

8pc 3/4" Dr. SAE 17pc 3/4" Dr. SAE 17pc 3/4" Dr. METRIC
Impact Socket Sets Impact Socket Set Impact Socket Set

Sizes: 1", 1-1/16", 1-1/8", 1-1/4", Contains the following sizes: Contains the following sizes:
1-5/16", 1-3/8", 1-7/16" & 1-1/2". + 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", + 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 33mm, 35mm,
1-7/16", 1-1/2", 1-9/16", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 36mm, 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm, &
#SUN-4680 (SHALLOW) 1-7/8", 1-15/16" & 2". 46mm.
MSRP $122.99
#SUN-4683 #SUN-4684
SPECIAL $89.99 MSRP $591.99 MSRP $462.99
SPECIAL SPECIAL
#SUN-4681 (DEEP)
MSRP $164.99 $379.99 $299.99

SPECIAL $124.99 6pc 1" Dr. HEX Impact Socket Sets 21pc 1" Dr. SAE Impact Socket Set

COMBINATION BUDD WHEEL SAE Sizes: 3/4", 7/8", 1", 1-1/8", 1-1/4", & 1-3/8” • Packaged in a heavy-duty blow-molded case w/ wheels for easy
Impact Socket Sets Metric Sizes: 14mm, 17mm, 19mm, 22mm, 24mm, & 27mm maneuverability & contains the following sizes:
+ 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16",
• Both Sets Include (1) Deep Socket: 33mm & (3) Square Budd #SUN-5606 (SAE) 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8",
Wheel Sockets: 1-1/2" x 13/16", 35mm x 17mm, 41mm x 21mm. #SUN-5607 (MM) 1-11/16", 1-3/4", 1-13/16", 1-7/8",
MSRP $250.00 1-15/16", 2".
#SUN-4626 (3/4” dr. 4pc) SPECIAL
YOUR CHOICE #SUN-5692
MSRP $185.99 MSRP $644.99
$164.99 SPECIAL
SPECIAL $139.99
5pc 1" Dr. WHEEL SERVICE $399.99
#SUN-5626 (1” dr. 5pc) SAE & METRIC Impact Socket Set
10pc 1" Dr. H-D Wheel Impact Set
* extra Budd Socket 38mm x 20mm • Two Deep Sockets: 1-1/2" and 33mm
• Two Deep Thin Wall Sockets: 1-1/8" and 1-1/4" • Sizes: Deep: 33mm, 1", 1-3/16", 1-3/4"
MSRP $248.99 • One Square Socket: 13/16" • Thin Wall Deep: 1-1/16", 1-1/8", 1-1/4"
• Square: 13/16",15/16"
SPECIAL $179.99 #SUN-5685 • Controlled Depth: 1-1/2"
MSRP $174.99
9pc 1" Dr. JUMBO STANDARD SPECIAL #SUN-5690A
SAE Impact Socket Set MSRP $348.99
$129.99 SPECIAL
Includes: 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8",
1-3/4", 1-7/8", & 2" $239.99

#SUN-5699
MSRP $242.99
SPECIAL

$179.99

36pc S2 Steel Bit Set w/ Ratchet 13pc 1/4” Dr. Universal SPLINE 8pc PROFESSIONAL
Socket Set w/ Mini Flex-Head
 Micro ratchet, 72 tooth design, exceeds ANSI specs Screwdriver Set
 Quick release extension bar for hard to reach applications Ratchet
(14) Torx (1 ea. Tamper Proof & Standard) T10 - T40 • Chrome vanadium shafts w/ vapor blasted magnetic tips
(4) SL: 1/8", 5/32", 3/16", 1/4" • (1) 1/4” hex shank to 1/4” drive adapter • Packaged in heavy molded plastic tray for storage
(6) PH: #1(2pc), #2 (2pc), #3 (2pc) • (1) 72 fine tooth mini flex-head ratchet • Hex bolsters on most sizes for extra turning power
(6) PZ: #1(2pc), #2 (2pc), #3 (2pc) • (11) Spline Sockets
(6) Hex: 5/64", 3/32", 1/8", 5/32", 3/16", 1/4" #SUN-9800 INCLUDES:
+ 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 SPECIAL SUN98001 Size: 3/8" x 8"
#SUN-9726 • Aluminum Case SUN98002 Size: 5/16" x 6"
MSRP $47.99 $19.99 SUN98003 Size: 1/4" x 4"
SPECIAL #SUN-9723 SUN98004 Size: 3/16" x 3"
MSRP $51.99 SUN98005 Size: 1/4" x 1-1/2"
$34.99 SUN98006 Size: #2 Phillips x 4"
SPECIAL $39.99 SUN98007 Size: #1 Phillips x 3"
24pc RIBE BIT Set SUN98008 Size: #2 Phillips x 1-1/2"
Expandable Pry Bars
Includes: 4pc 3/8” Dr. UNIVERSAL
3/8" & 1/2” Dr. Bit Holders, • High durability chrome vanadium construction w/ Matte finish. SPARK-PLUG Socket Set
Sizes: M4 - M14 w/ • Interlock system w/ 20° offset head for leverage
30mm & 75mm lengths • Pointed chisel on handle end for alignment • Polished Chrome Vanadium Steel, for strength and durability.
• Universal Joint Design, works great in confined areas.
#SUN-9724 #SUN-9805 (22-32”) • Rubber Buffer, hold spark plug securely
MSRP $54.99 MSRP $61.99 during installation/removal.
SPECIAL • Set contains the following sizes:
SPECIAL 9/16”, 5/8”, 3/4”, & 13/16”
$39.99
$49.99 #SUN-8844
MSRP $56.99
#SUN-9810 (34-52”) SPECIAL
MSRP $173.99
$39.99
SPECIAL $119.99

PILOT PUNCH KITS 5pc Pneumatic 5pc Pneumatic TM
Pilot Punch Set Separating Fork Set
6pc Set SPEEDY UNIVERSAL
+ 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, & 5/16” • Used to drive in & remove roll, spring, or split • Separates ball-joints & tie-rods quickly INNER TIE ROD TOOL
pins or other hollow tension pins. • Minimal shock avoids damage.
#MAY-62250 Sizes Include: 1/4”, 5/16”, 3/8”, 7/16”, & 1/2”. • Grips securely on round, hexagonal & octago-
MSRP $65.18 All Sizes Available Separately. #MAY-31940 nal tie rods; almost every length and diameter.
SPECIAL MSRP $196.82 • Range: 35mm to 45mm / 1-3/8” to 1-3/4”.
#MAY-32020 SPECIAL • Narrow profile allows use in confined spaces &
$54.99 MSRP $87.78 the long shaft helps keep wrenches from
SPECIAL $144.99 damaging auto body.
9pc Set
+ 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, $69.99 Dominator™ Pry Bars #MAY-29910
3/16”, 7/32”, 1/4”, & 5/16”. MSRP $215.69
Xtra Long • Hardened, tempered steel shaft runs from SPECIAL
#MAY-62252 Pneumatic Accessories cutting edge through the handle.
MSRP $87.71 • Capped end is in direct contact w/ the shaft, $159.99
SPECIAL • Long Reach for difficult to access applications. allows user to strike w/out damaging the handle.
• Made of High-Quality Steel, Heat-Treated, & • Ergonomic 2-composite handle.
$74.99 Black Oxide Finish.
Single Curved Pry Bars
12pc Set HAMMERS
+ 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, #MAY-40138 (36”) 28-38mm Roller Cage w/ EZ Snap Ring
1/4”, 5/16”, 3/8”, 7/16”, & 1/2”. #MAY-32001 (12”) MSRP $89.04 + This addition creates a range of 28-45mm,
fitting EVERY inner tie
#MAY-62254 SPECIAL $29.99 SPECIAL $69.99 on the market today!
MSRP $133.67
SPECIAL #MAY-32002 (18”) #MAY-40139 (42”) #MAY-29916
MSRP $98.00 MSRP $93.13
$114.99 SPECIAL $39.99
SPECIAL $79.99 SPECIAL $69.99
4pc Brass Assortment Set #MAY-32003 (24”)
#MAY-40160 (48”) Pry Bars w/
• Used for non-marring applications. SPECIAL $49.99 MSRP $133.58 Screwdriver Handles
• Designed to inhibit sparking.
• 1/4” - solid punch. SCRAPERS SPECIAL $114.99 Offers a more comfortable & secure grip.
• 1/4” & 3/8” - pin punches.
• 3/8” - drift punch. #MAY-32016 (2”x18”) #MAY-40162 (58”) #MAY-40111 (12")
MSRP $145.18
#MAY-62277 SPECIAL $34.99 $14.99
MSRP $48.18 SPECIAL $124.99
SPECIAL #MAY-32017 (2”x24”) #MAY-40112 (18")
Pry Bar Sets
$39.99 SPECIAL $39.99 $24.99
#MAY-61355 (3pc)
5pc LONG PIN PUNCH KIT 9pc Brass Pilot-Punch Set #MAY-40109 (24")
+ 7”C, 12”C, & 18”C
Sizes; 1/8”, 3/16”, 1/4”, 5/16”, & 3/8”. • Will not damage harder materials. $29.99
• Non-Sparking, Non-Marring, & Non-Magnetic. MSRP $90.76
#MAY-62065 • Includes Sizes: 1/16”, 5/64”, 3/32”, 1/8”,5/32”,
MSRP $56.18 3/16”, 7/32”, 1/4”, & 5/16”. SPECIAL $79.99
• Knurled Grip Handle.
SPECIAL $49.99 #MAY-61356 (3pc) DOMINATOR®
#MAY-61368 CARBON SCRAPER SETS
6pc COLD CHISEL KIT MSRP $55.87 + 18”S, 24”C, & 36”C
SPECIAL Capped-ends allow striking w/out damage.
Sizes: 1/4”, 5/16’, 3/8”, 1/2”, 5/8” & 3/4” MSRP $178.13
$49.99 4pc 12” OAL Set
#MAY-60560 SPECIAL $139.99 • Blade Widths: 1/2”, 3/4”,
MSRP $53.87 ALL-AROUND 1” & 1-1/2”.
SPECIAL PUNCH & CHISEL KITS #MAY-61366 (5pc)
#MAY-60001
$44.99 #MAY-61005 (6pc) + 7”C, 12”C, 18”C, SPECIAL
24”C, & 31”C
Punch & Chisel Holder PUNCHES: (1) Solid , (2) Pin, & (1) Center $59.99
CHISELS: (2) Cold MSRP $153.80
• Saves your knuckles and prevents accidents. 2pc Heavy-Duty Set
• Work w/ punches or chisels up to 1” diameter. MSRP $49.07 SPECIAL $119.99 • Blade Widths: 2”& 3”
• Great for use in tight spaces. SPECIAL • OAL: 14.5” & 17”
4pc DOMINATOR®
#MAY-50301 $39.99 Hook & Pick Sets #MAY-60026
MSRP $36.51 SPECIAL
#MAY-61044 (14pc) • Shaft runs from cutting edge through handle.
SPECIAL $29.99 • Capped-End, prevents damage to handle. $74.99
PUNCHES: • Ergonomic 2-composite handle.
(2) Solid , (5) Pin, (1) Line-Up, & (1) Center 4pc O-RING Remover Set
CHISELS: (5) Cold Standard Set (10” OAL)
• Contains: Scratch Awl, plus • For removal of o-rings and seals.
MSRP $111.22 90°, Complex, & Curved Hooks. • Rounded tips for easy, damage free removal.
SPECIAL • (2) tip configurations w/ (2) blade lengths.
#MAY-60000
$94.99 MSRP $62.11 #MAY-60028
SPECIAL SPECIAL
#MAY-61050 (24pc)
$49.99 $24.99
PUNCHES:
(6) Solid , (6) Pin, (1) Prick, & (2) Center Mini Set (6.5” OAL)
CHISELS: (6) Cold , and (1ea) Cape, • Contains: Scratch Awl, plus 90°, Complex, &
Half-Round, & Diamond Point Curved Hooks.

MSRP $197.62 #MAY-60003 HEAVY-DUTY Seal Puller
SPECIAL MSRP $21.00
SPECIAL Remove the most stubborn seals w/ this
$144.99 puller that is finished in black oxide.
$19.99
#MAY-37019
Xtra-Long Set (20.5” OAL) MSRP $25.04
• Contains: Cotter-Pin Puller, plus 90°, Com- SPECIAL
plex, & Curved Hooks.
$19.99

#MAY-60027
MSRP $114.02
SPECIAL

$84.99

ALL Mayhew Punch & Chisel Sets
are USA Quality Made Tools,

& packaged in durable roll-up pouches.

KNIFE & TOOL SHARPENERS

TM Flexible-Belt Sharpening Technology, Sharpens Every Blade FAST & EASY.

5-STAGE GUIDED • (2) Platforms w/ 6 different guides provide Ken Onion Edition
FIELD SHARPENER 2.2.1 precision sharpening.
• (3) Abrasive Belts: coarse, medium, & fine Work Sharp has teamed up with renowned
1st Angle Guided Sharpening Solution! *Replacement Belts #WSSA0002012. knife maker Ken Onion to deliver the
• (2) Diamond Plates: Coarse & Fine • Features: contoured handle, 6ft power cord, ultimate sharpening solution!
• (2) Ceramic Rods: Large(3-Positions) & Small & a 2-position push button power switch.
• (1) Leather Strop: conditioned w/ Micro- • Adjustable Sharpening Guide, precise edge bevels from 15° to 30°
Abrasive #DAR-WSKTS • Premium Flex Abrasive Belts, deliver long lasting razor-sharp edge.
• Sharpening Guides: 20° & 25° provide MSRP $107.27 • Variable Speed Motor, designed to handle every sharpening task from
consistent blade edge angles. SPECIAL grinding to honing.

#DAR-WSGFS221 $84.99 #DAR-WSKTS-KO
MSRP $34.95 MSRP $190.00
SPECIAL SPECIAL

$29.99 $159.99

RAPID RESPONSE® F611 RAPTOR B315 KNIFE w/ DX355 KNIFE w/
6” TACTICAL FIELD KNIFE Rubberized Grip Handle Double-Lock Safety Switch
POCKET KNIVES!
MILITARY APPROVED • Blade: 9Cr18 stainless steel • Blade: 9Cr18 stainless steel
• Blade Assist Technology results in a blade that • 9Cr18 Stainless Steel Blade. • Handle: TRP over hard nylon frame • Handle: Checkered G10 on stainless steel
releases faster, smoother, and safer than other • Overall Length x Weight: 11” x 10.8oz. • Length: 3.25” blade / 8.625” overall frame, w/ pocket-clip.
assisted opening knives. • Molded, hard protective nylon sheath. • Weight: 3.6 oz • Length: 3.5” blade / 8.125” overall
• Fiberglass-filled nylon handle on a • Handle Material: textured elastomer. • Weight: 5.2 oz
Stainless Steel Frame. #CST-20345
#CST-CUS100 MSRP $26.95 #CST-19916
RX312 = 3” RX321 = 3.9” MSRP $47.43 SPECIAL MSRP $34.95
SPECIAL SPECIAL
#CST-19212 #CST-19214 $19.99
MSRP $41.49 MSRP $47.40 $39.99 $29.99
ABSAROKA FOLDING
SPECIAL SPECIAL SEDGWICK FOLDING POCKET KNIFE “BOREAL”
POCKET KNIFE Folding Pocket Knife
$34.99 $39.99 • 2-3/4” Partially Serrated Multi-Colored Titanium
• 3-1/2” stainless steel blade blade. • 3" Stainless Steel Blade
• 5” camouflaged ABS handle. • Thumb & forefinger ambidextrous one hand • 4-1/2" Polished Hardwood Handle
• Fore-flipper, Blade-guard, release, with frame lock and pocket clip. • Ambidextrous Thumb Studs
& Liner lock. • Weighs only 3.1 oz. • Pocket-Clip, & Liner-Lock
• Includes nylon belt pouch
• Weighs 5.4 oz. #SHE-12855 #SHE-12705
MSRP $16.18 MSRP $16.95
#SHE-12134 SPECIAL SPECIAL
MSRP $25.94
SPECIAL $11.99 $11.99

$19.99

STRAIGHT-BLADE Retractable The Original Folding Lockback Utility Knives
HOSE CUTTER Utility Knife
• Features: quick change lock blade, one-handed operation, & belt clip.
•Cuts rubber hoses from 1/4" to 1- • Quick change blade mechanism • Great for cutting hoses & plastics.
1/2". • Smooth retracting/locking blade • Accepts all standard utility blades.
•Replacement steel cutter blade advance. (4-1/2” to 6-7/8”)
OTC#4509-1 is available. #SHE-12113 #SHE-12115 #SHE-12119
#TIT-11024
#OTC-4509 SPECIAL + Blue Anodized Handle + Wood Inlaid Handle) + Ergo Handle w/
SPECIAL Blade Storage
$9.99 SPECIAL $16.99
$14.99 $16.99
$12.99 #SHE-12116
#SHE-12129
+ Mini Blue Handle w/
Keychain Ring + Twin-Blades w/
Pocket/Utility Knife
$9.99
$24.99

Ratcheting Hose Cutter AVIATION SNIPS 5-1/2” Multi-Purpose MONSTER 14-in-1
w/ 1-1/2” Capacity! Work Shears RAZOR BLADE! Hammer Multi-Tool
• Cuts Straight & Wide-Curves.
Works on rubber & plastic hoses, • Cutting Capacity: High Carbon Stainless Steel Blades  Bi Material Handle for a sure grip • Equip w/: Hammer, (3) Screwdrivers,
PVC pipe, & certain wire cables. 18ga CRS or 23ga SS. cut through rubber, leather, nylon,  Equipped “Quick Change Blade (2) Pliers, (2) Blades, Wire Cutters &
• One-handed release latch. System” w/ extra blades included. Stripper, Can Opener, Key Holder,
#TIT-15063 • Length of Cut: 1-5/16” rope, wire, even battery cables.  Available in a 5pc Display Box File, and belt poach.
SPECIAL * Available in a 6pc Counter Display.
#VSG-2073113 #VIM-WS55 #CAL-536
$14.99 MSRP $28.09 #SHE-12913
$19.99 SPECIAL $9.99 MSRP $18.44
SPECIAL
$24.99
$14.99

MILITARY SPECIALIZED HEAVY-DUTY TOOLS TM

MUT™ OHT™ One Handed…. Everything! THE NEW BREED
Features 18 Tools & 3 Bit Count Features 17 Tools
REBAR™
#LEA-850011 #LEA831633 (Black) Features 17 Tools
MSRP $192.00 #LEA831634 (Coyote)
SPECIAL MSRP $108.00 #LEA-831547
SPECIAL MSRP $77.00
$169.99 SPECIAL
$89.99
$64.99

MUT EOD™ SUPER TOOL 300™ Award Winning Multi-Tool! SIDEKICK™
Features 17 Tools & 2 Bit Count Features 19 Tools Features 15 Tools
#LEA-850031
MSRP $200.00 #LEA831103 #LEA-831428
SPECIAL MSRP $103.00 MSRP $65.00
SPECIAL SPECIAL
$179.99
$79.99 $49.99
SKELETOOL™ MULTI-TOOLS
#LEA831106 (Black) WINGMAN™
Features 7 Tools & 2 Bit Count MSRP $115.00 Features 14 Tools
#LEA-830846 SPECIAL
SPECIAL #LEA-831425
$89.99 MSRP $50.00
$64.99 SPECIAL

CARBON FIBER SURGE™ The Powerhouse Multi-Tool! $39.99
#LEA-830850 Features 21 Tools & 2 Bit Count
SPECIAL SIGNAL™
#LEA830161 Features 14 Tools
$99.99 MSRP $123.00
SPECIAL +Shaped Diamond Coated Sharpener
CRATER-c33Tx™ by LEATHERMAN® +Fire-starting ferro rod
$114.99
#LEA-832261
Tools: CRUNCH™ by LEATHERMAN® MSRP $124.60
SPECIAL
• 420HC Straight/Serrated Combo Blade It’s just a Foreman short of a Construction Crew!
• Bottle Opener/Carabineer Clip $114.99
• 1/4” Flat Screwdriver & Phillips Screwdriver. Features 15 Tools
FULL-SIZED MULTI-TOOLS
Features: #LEA-68010203K
MSRP $117.00 CHARGE™ Unwavering Strength & Usability!
• Glass-filled Nylon Handle SPECIAL #LEA-830677 (ALX)
• Blade Launcher, Thumb Stud, Features 18 Tools & 9 Bit Count
& Removable Pocket Clip $99.99 MSRP $164.00
• 25-year Warranty SPECIAL
• 2.6 in (blade length)
$134.99
#LEA-8602240
SPECIAL

$44.99

CRATER-c33L™ by LEATHERMAN® #LEA-830667 (TTi)
Features 19 Tools & 8 Bit Count
Tools: RESCUE TOOLS MSRP $196.00
SPECIAL
• 420HC Straight Edge Blade RAPTOR™
• Bottle Opener/Carabineer Clip Features 6 Tools $164.99

Features: #LEA-831713 WAVE™ Leatherman’s Most Popular Model!
Features 17 Tools & 2 Bit Count
• Glass-filled Nylon Handle $69.99 #LEA-830040
• Thumb Stud, Blade Launcher, MSRP $107.00
& Removable Pocket Clip. SPECIAL
• 25-year Warranty
• 2.6 in (blade length) $99.99

#LEA-8601140 Z-REX™
SPECIAL Features 4 Tools

$34.99 #LEA-831647
MSRP $31.00

SPECIAL $24.99

All Leatherman Tools feature Stainless Steel Bodies
& are covered by their 25-year Warranty.

TM TONGUE & GROOVE PLIERS CUTTING PLIERS
#CNL-424 (4½”) MSRP $19.51 $15.99
WIRING TOOLS #CNL-426 (6½”) MSRP $16.86 $13.99 High Leverage
#CNL-420 (9½”) MSRP $20.34 $16.99
#CNL-908 #CNL-430 (10”) MSRP $21.16 $17.99 #CNL-337 (7”)
#CNL-440 (12”) MSRP $24.01 $19.99
SPECIAL #CNL-460 (16”) MSRP $39.87 $32.99 SPECIAL

$19.99 $19.99

Stripper & Cutter w/ Ergonomic Handle #CNL-338 (8”)

#CNL-957 SPECIAL

SPECIAL $22.99

$19.99 #CNL-480 (20”) MSRP $78.07 $64.99 Box Joint

Stripper & Cutter #CNL-436 (6”)

#CNL-958 LONG REACH CRIMPING AND SPECIAL
CUTTING TOOL
SPECIAL FLUSH CUTTING PLIERS $21.99

$14.99 Cuts plastic & 10-20 AWG copper wire cleanly. #CNL-437 (7”)

Cutter, Crimper, & Stripper #CNL-758 (7½”) #CNL-909 SPECIAL

#CNL-959 MSRP $37.56 MSRP $30.36 $22.99
SPECIAL SPECIAL
SPECIAL End Cutting
$34.99 $24.99
$24.99 #CNL-357 (7.5”)

Coax Cable Tool SPECIAL

#CNL-919 $24.99

SPECIAL #CNL-358 (8”)

$29.99 High Leverage Linesmen’s CURVED DIAGONAL SPECIAL

LOCKNUT PLIERS $29.99

• Thin Profile & fits most popular UL locknut Moving the rivet closer means less force CUTTING PLIERS Cable Cutting
sizes: (Metal, PVC, Plastic) required for cutting. Laser heat-treated cutting
edges last longer. And the NEW knife & anvil Forged Convex Head allows the user to rock #CNL-911 (9.5”)
• Spring Loaded Left/Right Handles
w/ lock for easy use & storage. style cutting edge ensures perfect mating, objects. NEW knife & anvil style cutting edge, SPECIAL
resulting in a clean cut every time. ensures perfect mating, resulting in a clean cut
#CNL-960 $29.99
#CNL-367 (7½”) every time.
MSRP $20.85
SPECIAL OR #CNL-447 (7¾" ) ADJUSTABLE
OIL FILTER PLIERS
$17.99 #CNL-368 (8½”) MSRP $32.55
SPECIAL • Right angle teeth grip in all directions.
7pc NUTDRIVER SETS MSRP $35.69 • PermaLock® fastener eliminates nut & bolt
SPECIAL $26.99 failure.
High torque, 3 sided grip. Laser etched steel YOUR CHOICE
cap for easy identification. High Leverage #CNL-209 (9")
$29.99
#CNL-MD7CB #CNL-ND7CB #CNL-449 (9½) - 4 adjustments,
Simply Cuts Easier - Fits filters up to 3½".
(MM: 5mm to 11mm) (SAE: 3/16” to 1/2”) Average Pounds to Cut = 60 lbs! MSRP $37.00
- Competitors can take up to 124 lbs, SPECIAL $19.99
MSRP $53.54
SPECIAL YOUR CHOICE resulting in 106% additional force. $29.99 #CNL-212 (12")

$44.99 #CNL-3610 (10½”) SLIP-JOINT PLIERS - 5 adjustment,
- Fits Filters up to 4¼".
7pc SCREWDRIVER SET MSRP $37.36 $24.99Designed w/ Wire Cutting Shear & PermaLock®
SPECIAL fastener that eliminates nut and bolt failure.
Features High Torque 3 sided grip, Go Thru
Steel Blade and Magnetic Tips. $29.99 #CNL-516 (6.5”) #CNL-215 (15")
Slotted - (3/16” & 1/4” x 4”), (1/4” x 6”), &
(3/8” x 8”). FENCE TOOL * Thin Nose - 6 adjustments,
Phillips - #1 (3/16” x 4”), #2 (1/4” x 4”), & - Fits Filters up to 5½".
#3 (3/8” x 8”) • Wire Stretcher, Splicer, & (2) Cutters. $18.99
• Staple Starter & Puller. $29.99
#CNL-SD7CB • Hammer on Jaw. #CNL-526 (6.5”)
#CNL-528 (8”) LONG NOSE PLIERS
MSRP $37.26 #CNL-85
SPECIAL $12.99 #CNL-317 (8")
MSRP $40.89 #CNL-326 (6")
$29.99 SPECIAL #CNL-537 (7”)
$24.99
* Fine Side Cutter

$34.99

$34.99 #CNL-548 (8”) #CNL-318
WELDERS PLIERS
$19.99 • 8.4” HD Side Cutter,

Adjustable Wrenches w/ w/ Useful Crushing Area

$29.99

• Grove nose design for superior spatter re- 20% Greater Jaw Capacity 8” LONG REACH PLIERS
moval.
• Grips & Draws out wire. Comfortable Synthetic Rubber Code Blue® Designed for long reach applications
• Spring Loaded.
grip for convenience & firm handling. & hard to reach spaces.

#CNL-360 #CNL-806WCB (6") #CNL718 (Flat Nose)

MSRP $35.13 $24.99 $21.99
SPECIAL
#CNL-808WCB (8") #CNL748 (End Cutter)
$29.99
$29.99 $27.99

NARROW NOSE PLIER #CNL-810WCB (10") NUTBUSTER PLIERS

• Air Brake Tool: easy brake clearance check for $34.99 Parrot Nose is ideal for round surfaces.
SAFE-T-STOP™ helps prevent finger pinch.
automatic or manual slack adjusters. #CNL-812WCB (12")
• Overall Length: 12” #CNL-307 (7”)
$39.99
• Jaw Capacity: 2.25” $18.99
• # of Adjustments: 7
#CNL-410 (9.5”)
#CNL-444
$19.99
MSRP $29.16
SPECIAL #CNL-414 (14”)

$24.99 $34.99

Xtreme Leverage Technology (XLT™) - A DIFFERENCE YOU CAN FEEL FROM THE FIRST CUT!
Positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs.

Locking Flexible Hose 3pc. Hose Gripper HOSE CLAMP PLIERS TM
Clamp Pliers Pliers Set
• Precision clamp on end of flexible cable allows 2pc FUEL LINE CLAMP SET
• 24” flexible cable for hard to reach areas. Includes 5/16", 1/2", & 3/4" hose gripper. for extended reach, in order to remove plastic
• Extended clamp allows superior extension. Overall Length = 11” and/or metal self tightening hose clamps. • Used to quickly shut off flow from vacuum,
• Locking mechanism allows for hands free use. • Replacement Cables Available brake, and fuel lines.
#SUN-3703 AST#9409A-03 • Enables you to pinch and
#SUN-3720 hold hose w/out damage.
MSRP $54.99 #AST-9409
MSRP $87.99 SPECIAL #OTC-4506
SPECIAL MSRP $53.65
$39.99 SPECIAL SPECIAL
$59.99
$49.99 $9.99

HOSE CLAMP PLIER SET 2pc LOCKING HOSE TRANSMISSION LINKAGE BRAKE SPRING PLIERS
CLAMPS BUSHING INSTALLER
• Includes both a CROSS-SLOTTED JAW New Design w/ longer stronger tips, offering
PLIERS and a WIDE, FLAT-BAND HOSE Includes: Easily and safely push tough nylon bushings more control without leaving deep cutting marks.
CLAMP PLIERS. • MVA7605 = 6” OAL, works up to 1” dia. into place. Works on different bushing sizes.
• The clamps are held open with a ratchet • MVA7607 = 8” OAL, works up to 1-¼” dia. #IMC-989
locking mechanism. Jaws swivel to access hose • Equip w/ angled jaws for accessibility. #IMC-909
clamps in any position. • Applies up to 50 lbs of force. MSRP $43.56
MSRP $45.38 SPECIAL
#OTC-4502 #MTY-MVA7609 SPECIAL
$29.99
SPECIAL SPECIAL $34.99

$29.99 $24.99

4pc 7" Fixed Tip Internal & External RETAINING RING PLIERS Convertible Retaining Ring
Snap Ring Pliers Set Pliers Sets
Includes (5) pairs of color coded interchangeable tips.
• Tapered Jaw Design Allows Increased Reach and Access Changes from Internal to External w/ a switch of a tab. Tip Sizes: .038", .047", .070", & .090"
• Tapered Tip Design for Improved Snap Ring Retention
• Professional Easy-Clean Dipped Grips #CNL-929 (10”) $59.99 #SKT-7600 (6pc)
Comes w/ (2) straight & (2) 90°
External: 1-1/2” to 4” (Sizes 0° & 90° )
#KDT-82150 Internal: 1-13/16” to 4”
SPECIAL
MSRP $104.48 #CNL-927 (8”) $34.99
SPECIAL $134.99
External: 1/4” to 2”
$84.99 Internal: 3/8” to 2” #SKT-7612 (12pc)

#CNL-926 (6”) $29.99 (Sizes 0°, 45° & 90° )

External: 1/8” to 1” SPECIAL
Internal: 1/4” to 1”
$279.99

FULL LINE OF PLIERS! SNAP RING PLIER SETS 5pc General Purpose Pliers Sets

DIAGONAL CUTTING PLIERS #AST-9401 (8pc) #SKT-17835
#IMP-03-MPD (5")
• Removes internal and external snap rings. MSRP $148.23
$3.99 MSRP $36.40 SPECIAL
SPECIAL
#IMP-03-DP8C (7.5") $99.99
$29.99
$4.99 #SKT-17836
#AST-9402 (2pc Large)
10" GROOVE JOINT PLIER (Wide Capacity)
#IMP-03-GJ8 MSRP $55.40 MSRP $198.31
SPECIAL SPECIAL
$5.99
$44.99 $139.99
#IMP-03-GJ10
12pc FIXED TIP RATCHETING CHAIN BOLT CUTTERS
$7.99 SNAP RING PLIERS SET WRENCH
#IMP-22-BC14
6" & 8" LONG NOSE PLIERS  Easily converts from external to internal. #OTC-6968 (12” Handle)
#IMP-03-LN6 (6")  Packaged in blow molded case. (14” handle)
Grip Range ½”-4½” O.D.
$3.99 #CAL-1016 $9.99
$44.99
#IMP-03-LN8 (8") MSRP $248.45 #IMP-22-BC18
SPECIAL #OTC-6969 (24” Handle)
$4.99 (18” handle)
$129.99 Grip Range 3”-6½” O.D.
6” & 8" SLIP JOINT PLIERS $14.99
#IMP-03-SJ6 (6") $89.99

$3.99 HEAVY-DUTY C-CLAMPS SELF ADJUSTING #IMP-22-BC24

#IMP-03-SJ8 (8") OIL FILTER PLIERS• Malleable steel w/ a durable black enamel finish (24” handle)
• Chrome plated spindle & handle.
$4.99 • Self-Adjusting Designs, allows for one-hand $19.99
#TIT-51573 (4”) use.
4pc SNAP RING PLIER SET #IMP-22-BC36
#IMP-03-SRP46 $7.99 • Jaw Opening: 2-1/4” to 4-3/4”
• OAL: 11” (36” handle)
$19.99
#TIT-51574 (5”) #ALL-942068 $39.99
Safety Wire Twisting Plier
$9.99 MSRP $24.58 #IMP-22-BC42
Automatic action twist safety wire to remove SPECIAL
slack. Prevents damage to wire & prevents #TIT-51575 (6”) (42” handle)
loosening. A MUST for nuts and bolts in critical $19.99
& high vibration areas. $14.99 $44.99

#IMP-03-SWP9

SPECIAL

$24.99

LOCKING C-CLAMPS LOCKING C-CLAMPS
w/ SWIVEL PADS
TM #VSG-24R (24") SPECIAL $39.99
#VSG-24SP (24") SPECIAL $39.99 #VSG-18R (18") SPECIAL $34.99
16” Adjustable Spud Wrench #VSG-18SP (18") SPECIAL $34.99 #VSG-11R (11") SPECIAL $24.99
#VSG-11SP (11") SPECIAL $24.99 #VSG-9DR (9") SPECIAL $19.99
• Chrome Vanadium construction. #VSG-9SP (9") SPECIAL $19.99 #VSG-6R (6") SPECIAL $14.99
• Black oxide finish resists corrosion. #VSG-6SP (6") SPECIAL $14.99
• Opens to a maximum of 1-1/2".

#TIT-216

MSRP $38.23
SPECIAL

$34.99

STRAIGHT JAW LOCKING PLIERS CURVED JAW LOCKING PLIERS & LONG NOSE LOCKING
WIRE CUTTER PLIERS & WIRE CUTTER
#VSG-10R (10")
#VSG-7R (7") #VSG-10WR (10") SPECIAL $14.99 #VSG-9LN (9") SPECIAL $18.99
#VSG-7WR (7") SPECIAL $13.99 #VSG-6LN (6") SPECIAL $14.99
SPECIAL YOUR CHOICE $14.99 #VSG-5WR (5") SPECIAL $12.99 #VSG-4LN (4")
#VSG-4WR (4") SPECIAL $11.99 SPECIAL $13.99

8" LOCKING SHEET METAL TOOL 9" LOCKING WELDING CLAMP LARGE JAW LOCKING PLIER

#VSG-8R #VSG-9R Great for “stuck” oil filters.

MSRP $25.88 MSRP $30.83 #VSG-12LC
SPECIAL SPECIAL
MSRP $26.95
$24.99 $24.99 SPECIAL

$24.99

LARGE LOCKING C-CLAMP LOCKING CHAIN CLAMP CURVED JAW LOCKING PLIERS

• Allows to tightly clamp around objects of up Overall Length of Chain = 18" #VSG-10CR (10")
to 10" wide depending on jaw opening. #VSG-7CR (7")
• Jaw opens 7½". #VSG-20R
MSRP $39.13 SPECIAL YOUR CHOICE $14.99
#VSG-18DR SPECIAL

MSRP $45.25 $34.99
SPECIAL

$39.99

Replacement Chain
VSG#20REP

5pc LOCKING PLIERS SET 5pc WELDERS CLAMP ADJUSTABLE WRENCHES PIPE WRENCHES
SET STEEL
Packaged in a Roll-up Canvas Bag #IMP-02-AW6 (6") #IMP-02-PW8H (8") $4.99
Contains: Contains the Following: (8") #IMP-02-PW10H (10")$9.99
10R, 10CR, 7WR, 6LN & 5CR. Locking C-Clamps $4.99

#VSG-68 + (2) 11R #IMP-02-AW8
+ (2) 6R
MSRP $88.42 Straight Jaw Pliers $5.99 #IMP-02-PW12H (12")$39.99
SPECIAL + (1) 10R
#IMP-02-AW10 (10") #IMP-02-PW14H (14")$39.99
$69.99 #VSG-74
$7.99 #IMP-02-PW18H (18")$69.99
MSRP $102.98
SPECIAL #IMP-02-AW12 (12") #IMP-02-PW24H (24")$89.99
(15") #IMP-02-PW36H (36")$189.99
$79.99 $9.99 (18")
(24")
PINCH-OFF TOOL #IMP-02-AW15 ALUMINIUM $16.99
#TIT-21334 (14”) $23.99
Pinches off & locks on to tubing, $19.99 #TIT-21338 (18”) $39.99
leaving both hands free. #TIT-21344 (24”)
#IMP-02-AW18
#VSG-RR
$29.99
MSRP $20.95
SPECIAL #IMP-02-AW24

$14.99 $54.99

#TIT-21346 (36”) $74.99

#TIT-21348 (48”) $144.99

ALUMINUM UNIVERSAL BODY SHOP RIVET KIT 70pc GREASE FITTING
265pc w/ 12 Varieties Assortment
THREAD GAUGES TM
Descriptions for each rivet, Contains the following Sizes (qty):
1) US Threads 2) Metric Threads OEM application, and reorder numbers. + 1/8” = Straight (10), 45° (5), 90° (5). 100pc Grease Fitting Assortment
- From #5 to 3/4" & - From2.5 to 22mm w/ + 1/4” = Straight (20), 45° (5), 90° (5).
- Pitch of 10TPI to 44TPI - Pitch of .45 to 2.5mm #POP-60980 + 6mm x 1” = Straight (10). #LNC-5186 (MM)
+ 8mm x 1” = Straight (5).
3) Pipe Threads 4) Spark Plug Threads SPECIAL + 10mm x 1” = Straight (5). Contains the following Sizes (qty):
- From 1/16" to 1/2" - From 10 to 18mm. + 6mm = Straight (40), 45° (20), 90° (10).
- Pitch of 14TPI to 27TPI $34.99 #TIT-45215 + 8mm = Straight (5), 45° (5), 90° (5).
+ 10mm = Straight (5), 45° (5), 90° (5).
#THX-432 SPECIAL
MSRP $154.80
$11.99 $14.99 SPECIAL

COTTER PIN Assortments 500pc ALLUMINUM 150pc HITCH PIN Assortment $129.99

1,000pc Master Set RIVET Assortment Contains the following Sizes (qty): #LNC-5469 (SAE)
Contains the following Sizes (qty.): + 3/32” x 1-3/16” (42)
1/16” x 1” (360), 3/32” x 1” (240), Contains the following Sizes (qty): + 5/64” x 1-5/16” (30) Contains the following Sizes (qty):
3/32” x 1-1/2” (140), 1/8” x 1-1/4” (115), + 5/64” x 1-9/16” (25) + 1/8” = Straight (20), 65° (10), 90° (10).
1/8” x 2” (75), & 5/32” x 2-1/2” (50). + 1/8” x 1/4” (120) + 7/64” x 1-5/8” (25) + 1/4”-28 = Straight (40), 45° (10), 90° (10).
+ 9/64” x 1-3/4” (20)
#TIT-45204 + 1/8” x 5/16” (120) + 5/32” x 2-15/16” (8) MSRP $105.85
SPECIAL
SPECIAL + 1/8” x 3/8” (120) #TIT-45210
$89.99
$14.99 + 3/16” x 15/16” (70) SPECIAL

555pc Set + 3/16” x 3/8” (70) $9.99
Contains the following Sizes (qty.):
1/16” x 1” (150), 3/32” x 1” (150), #TIT-45228 96pc BLADE FUSE Assortments
3/32” x 1-1/2” (100), 1/8” x 1-1/4” (75),
1/8” x 2” (50), & 5/32” x 2-1/2” (30). SPECIAL 12pc each of the following Zinc Electrodes:

#TIT-45205 $14.99

SPECIAL O-RING Assortments 158pc WIRE NUT ASSORTMENT - 3A (Violet) - 5A (Orange)
- 7.5A (Brown) - 10A (Red)
$9.99 Buna-N BG715 Rubber, & Contain 32 Popular Sizes! Reusable Flame-Resistant Polyproelene Shell. - 15A (Blue) - 20A (Yellow)
- 25A (Clear) - 30A (Green)
144pc LARGE Sizes Set 407pc SAE Contains the following Sizes:
Contains the following Sizes (qty.): Nominal I.D. Sizes:
1/8” x 2” (50), 3/32” x 2-1/2” (30), 3/16” x 3” (20), + 1/8” up to 2-1/4”. + Gray #22 to #16 AWG Wire (300v) Qty: 40 #TIT-45227 (ATO)
1/4” x 2” (20), 1/4” x 3” (16),
& 5/16” x 2-1/2” (8). 419pc MM + Blue #22 to #14 AWG Wire (300v) Qty: 40 SPECIAL
Nominal I.D. Sizes:
#TIT-45206 + 3mm up to 50mm. + Orange #22 to #14 AWG Wire (600v) Qty: 50 $14.99

SPECIAL #TIT-45202 (SAE) + Yellow #18 to #12 AWG Wire (600v) Qty: 18

$9.99 #TIT-45203 (MM) + Red #18 to #10 AWG Wire (600v) Qty: 10

SPECIAL #TIT-45339 #TIT-45229 (Mini)

$19.99 SPECIAL SPECIAL

$9.99 $14.99

125pc RUBBER GROMMET 120pc ROLL PIN 80pc VACUUM CAP 88pc MASTER AUTO
Assortment Assortment Assortment
FUSE Assortment
Contains Rubber Grommet Sizes : Contains the following Sizes (qty): Constructed of Heat Resistant Buna-N Rubber.
+ 1/8” x 1/4” ranging to 3/4” x 15/16”. + 5/32” x 5/8” ranging Contains the following Sizes (qty): 5pc each of the following Zinc Electrodes:
Contains Rubber Plug Sizes: to 3/16” x 1-1/4”. + 3/16” (20), 5/32” (20),
+ 9/32”, 3/8”, 1/2”, 5/8”, 7/32” (20), 1/4” (10), Maxi Blade Fuses
3/4”, 7/8”, & 1”. #TIT-45342 5/16” (5), & 3/8” (5).
- 20A (Yellow) - 30A (Green)
#TIT-45214 SPECIAL #TIT-45252
- 40A (Orange) - 50A (Red)
SPECIAL $9.99 SPECIAL (Tan)
- 60A (Blue) - 70A
$9.99 $14.99 (Purple)
- 80A (Clear) - 100A

Blade Fuses & Mini Blade Fuses

- 3A (Violet) - 5A (Orange)

- 7.5A (Brown) - 10A (Red)
- 15A (Blue) - 20A (Yellow)
- 25A (Clear) - 30A (Green)

270pc HNBR O-RING 200pc SPRING ASSORTMENT 110pc COPPER WASHER #TIT-45230
Assortment Assortment
- (76) Compression Springs SPECIAL
• Hydrogenated Nitrile Butadiene Rubber (HNBR) + Range 7/32” x 11/16” to 3/8” x 3/4” Contains the following Sizes (qty):
• Works on applications between -58° F to 329° F + 1/4” (30), 5/16” (25), 3/8” (20), 7/16” (15), $19.99
• GREAT For R-134A Air Conditioning Systems. - (134) Extension Springs 1/2” (10), & 5/8” (10).
• Contains the following Sizes: + Range 3/16” x 1-3/4” to 5/16” x 1-3/4” 71pc MICRO-2 FUSE
+ 7/32” x 1/16” ranging to #TIT-45217
11/16” x 5/64”. #TIT-45200 Assortment
SPECIAL
#TIT-45201 SPECIAL
$14.99
SPECIAL $9.99

$9.99 10pc each of the following Zinc Electrodes:

- 5A (Orange) - 25A (Clear)
- 30A (Green)
- 7.5A (Brown)

36pc LOW PROFILE 300pc SNAP RING Assortment 300pc E-CLIP Assortment - 10A (Red)

MINI FUSE Assortment Contains Internal Sizes: Black Oxide Finish & Contains Sizes (qty): - 15A (Blue)
+ 3/16” ranging to 7/8” . + 1/16” (30), 1/8” (30), 3/16” (40),
Contains External Sizes: 1/4” (50), 3/8” (50), 1/2” (40), - 20A (Yellow)
+ 1/8” ranging to 1-1/4”. 5/8” (20), 3/4” (20), & 7/8” (20).
Contains Fuse Puller and - Fuser Puller
#TIT-45212 #TIT-45208
(5) each of the following Zinc Electrodes: #TIT-45231
SPECIAL SPECIAL
- 5A (Orange) - 7.5A (Brown) SPECIAL
$9.99 $9.99
- 10A (Red) - 15A (Blue) $21.99

- 20A (Yellow) - 25A (Clear)

- 30A (Green)

#TIT-45237

SPECIAL

$19.99 24pc MAXI FUSE

Assortment

HEAT SHRINK TUBE ASSORTMENTS 3pc each of the following Zinc Electrodes:

 Versatile heat shrink tubes for use in a wide variety of applications in automotive, marine, electrical, industrial, home and more. - 20A (Yellow)

 Excellent for insulation, strain relief, abrasion shielding and corrosion protection. - 30A (Green)

 Forms a secure bond over smooth and irregular shapes. - 40A (Orange)

 Shrink tubes made of polyolefin material. - 50A (Red)

60pc DOUBLE WALLED w/ 3:1 Shrink Ratio 160pc MULTI-COLOR w/ 2:1 Shrink Ratio - 60A (Blue)

+ Adhesive lining provides an environmental seal + (5) colors in (8) Sizes - 70A (Tan)

to prevent moisture, dirt, and chemicals from - ideal for color coding & bundling. - 80A (Clear)

affecting electrical connections. - 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", - 100A (Purple)

+ (5) Red & Black Sizes 5/8" & 3/4". #TIT-45232

-1/8", 3/16", 1/4", 3/8", & 1/2" SPECIAL

#TOO-23210 #TOO-23250 $24.99

SPECIAL $19.99 SPECIAL $14.99

TM Magnetic Tool Holder Magnetic Socket Holders METAL RAIL
SOCKET ORGANIZERS
Fully Magnetized • Magnetic Surface: 9-11/16” x 2” Surface 1/4”
Stainless Steel Parts Trays • Convenient Flex Handle, for easy surface  26 separate compartments Each rail has 16 clips.
removal & mobility.  Holds up to 5/8" or 15mm.
• Can be used upside-down or on side of vehicle. • Magnet is incased in steel, #VIM-V420 (1/4")
• Rubber covered magnets will not scratch metal. for long life and durability. #LIS-40120 (Red) #VIM-V421 (3/8")
#LIS-40130 (Black) #VIM-V422 (1/2")
#SUN-8817 (11-1/2" L x 11" W) #SUN-8818 #VIM-V424 (3/4")
$19.99
- Quad Magnetic SPECIAL SPECIAL
3/8"
MSRP $59.99 $19.99  28 separate compartments $4.99
SPECIAL  Holds up to 1" or 24mm.
24" Magnetic Bar Holder All-in-One Tray
$44.99 #LIS-40200 (Red)
Organizes Your Tools & Holds them Securely. #LIS-40210 (Black) #VIM-V444

#SUN-8814 (14-1/4" L x 6-1/2" W) #AST-7324 $24.99 $24.99

- Triple Magnetic SPECIAL 1/2" Shop Cart Tray
 22 compartments. Red powder coated tray with (5) rails and an
MSRP $44.99 $24.99  Holds up to 1" or 20mm. assortment of 1/4", 3/8" & 1/2" socket clips.
SPECIAL
#LIS-40900 (Red) #VIM-V445
$34.99 #LIS-40990 (Black)
SPECIAL
$29.99
$34.99

#SUN-8812 (9-1/2" L x 5-1/2" W) Stainless Steel Strainer Organize your Sockets for Red HEAVY-DUTY

- Double Magnetic w/ Rubber Coated Magnet Quick, Easy Identification Plastic Socket Racks

MSRP $30.99 • Dimensions: 11”(diameter) x 4”(deep) by Size and Style. 14 inches long & include 10 studs.
SPECIAL • Anti-rust design perfect for washing dirty tools
• Tools can be attracted firmly during flushing All organizers hold deep & regular sockets. Made INDIVIDUAL RAILS
$24.99 in U.S.A.
#TIT-11180 #VIM-V520 (1/4")
#SUN-8810 (6" diameter) SAE #VIM-V521 (3/8")
SPECIAL #VIM-V522 (1/2")
- Single Magnetic #HNS-1401 (1/4" dr, 1/8" to 9/16")
$14.99 SPECIAL
MSRP $14.99 $10.99
SPECIAL Mini Magnetic Parts Tray $12.99
#HNS-3801 (3/8" dr, 1/4" to 1")
$11.99 • 4-1/4" Stainless steel dish.
• Rubber Protection prevents scratching $12.99
Tool Hanging Board • Available in a 12pc Counter Display.
#HNS-1201 (1/2" dr, 3/8" to 1-1/4") 3 PIECE SET
• Comes with (2) Boards & (9) Hangers. #TIT-11061
• Can be assembled in a variety of ways to fit $14.99 #VIM-V523
your needs! $4.99
• High grade plastic #HNS-9301 (3pc set) SPECIAL
can withstand
toughest $34.99 $39.99
Environments.
Multi-Purpose Organizers
#HNS-8209
Use to Store & Organize Small Parts,
$34.99 Hardware, & Other Supplies in Separate Clear

13-TOOL PLIERS & WRENCH RACKS METRIC Compartments for Easy Viewing.

Help Organize your Tool-Box Drawer. #HNS-1402 (1/4" dr, 4mm to 14mm) (4) COMPARTMENT
• Two size of slots to accommodate all sizes of tools.  Dimensions: 4.25”(W) x 12.2”(L) x 2.5”(H)
• Front edge has indentions to hold tools upright. $10.99  All compartments are the same size.
• Dimensions: 11" (L) x 7" (W) x 2"(H)
#HNS-3802 (3/8" dr, 6mm to 20mm) #TIT-21267
#LIS-40460 (Black)
#LIS-40490 (Red) $12.99 SPECIAL

SPECIAL #HNS-1202 (1/2" dr, 10mm to 27mm) $5.99

$19.99 $14.99 (9) COMPARTMENT
 Dimensions: 6.69”(W) x 18.11”(L) x 3.74”(H)
Quik-Pik UNIVERSAL Wrench #HNS-9302 (3pc metric set)  All compartments are the same size.
SAE & Metric Wrench Racks Racks
$34.99 #TIT-21268
• Organizes (13) wrenches while the clear • Tough polypropylene rack holds 13 wrenches,
labeling & comes w/ two sets of peel-off numbers. SPECIAL
makes sizes easy to grab and go.
• Low profile, fits 2-inch deep toolbox drawers. - Metric sizes: 6mm through 20mm $12.99
• Made of tough polypropylene plastic. - SAE sizes: 1/8″ through 1″.
• Spring tabs can also be trimmed to 3/8" DRIVE MASTER HEX (12) COMPARTMENT
Red - SAE custom fit extra thick wrenches. & TORX SOCKET TRAY  Dimensions: 6.3”(W) x 10.43”(L) x 9.25”(H)
(Sizes: 1/4" to 1")  (8) Small & (4) Large Compartments
Standard Universal #HNS-50000
#HNS-5301 #TIT-21269
#HNS-5300 (Blue) $9.99
$6.99 SPECIAL
$8.99
$24.99
Grey - Metric
(Sizes: 7mm to 19mm) Reverse Universal
#HNS-5302
#HNS-3500 (Grey)
$6.99
$8.99

SOCKET BOSS DURA-PRO TWIST LOCK SOCKET ORGANIZERS

Universal Twist-Lock Socket Trays • Simple & Secure – twist your sockets into a locked position. TM

Transportable, Secure, & Versatile! • Socket clips will adjust to any position on either side of the rail. Magnetic Twist Lock
Complete Socket Systems
3-Rail Universal (1/4”, 3/8”, & 1/2”) • Hangs vertically for convenient storage & easy to transport.
Kit includes: (4) 18” socket organizer rails, (384)
Kit includes: (1) Socket Tray, (3) 18” Universal • Each 18” socket rail includes 15 clips & 96 I.D. stickers. socket ID stickers, organizer mounting kit, face
Socket Rails, (15) Socket Clips of each Size. & side mount ratchet and extension holders,
STANDARD RAIL • Made in USA – lifetime guarantee. MAGNETIC RAIL (15) 1/4” socket clips, (30) 3/8” socket clips, (15)
#ERN-8450 1/2” socket clips.
1/4” 1/4”
(Red Rails) #ERN-8470 (Red)
OR #ERN-8400 (Red) #ERN-8400M (Red)
#ERN-8471 (Blue)
#ERN-8451 #ERN-8403 (Blue) #ERN-8403M (Blue) MSRP $49.99
SPECIAL
(Blue Rails) #ERN-8420 (Black) #ERN-8420M (Black)
$39.99
2-Rail 3/4” Drive 3/8” 3/8”
18” Magnetic Twist Lock
Kit includes: (1) Socket Tray, (2) 18” Socket #ERN-8401 (Red) #ERN-8401M (Red) Pro Series Socket System
Rails, (14) 3/4” drive Twist-Lock Socket Clips, & #ERN-8404 (Blue) #ERN-8404M (Blue)
(192) ID Stickers. #ERN-8421 (Black) #ERN-8421M (Black) A excellent set for the serious mechanic.
• These socket rails have Rare Earth magnets
#ERN-8458 1/2” 1/2” built into the base, providing a super strong pull
that will hold through thick drawer liners.
(Red Rails) #ERN-8402 (Red) #ERN-8402M (Red) • The recessed magnets will not scratch or mar
OR #ERN-8405 (Blue) #ERN-8405M (Blue) the paint on tool boxes or metal surfaces.
#ERN-8422 (Black) #ERN-8422M (Black) • Includes: (5) 18" socket rails, (15) 1/4”, 3/8", &
#ERN-8459 1/2" drive socket clips, and (1) ratchet & exten-
YOUR CHOICE YOUR CHOICE sion clip of each drive size.
(Blue Rails)
$7.99 $16.99 #ERN-8475
SPECIAL YOUR CHOICE
DURA-PRO HD THE PLIER PRO MSRP $99.99
$24.99 SOCKET ORGANIZERS SPECIAL
Maximize storage by organizing your pliers in
Designed for Impact & Heavy Sockets and upright position in your tool box! $84.99
18” rail w/ 15 clips & 96 I.D. stickers. Dimensions: 10” x 3.5” x 3”

#ERN-8320 (3/8”) #ERN-5500
#ERN-8321 (1/2”) SPECIAL
YOUR CHOICE
$12.99
$7.99

Transportable Versatile Secure

24pc & 30pc WRENCH TOWERS "THE TRAY" CLASSIC “THE TRAY" JUNIOR

• Double-Sided Tower provides organization for both SAE & Metric. 1.5" deep. A variety of compartments. 1.5" deep. 3 long compartments.
Dimensions: 11" x 16" x 1.5" Dimensions: 10.5" x 10.5" x 1.5"
• No-Slip Rubberized Foot Pegs, ensure a stable base.
• Top Hand-Grip, for ease of transport. #ERN-5010 (Red) #ERN-5020 (Red)
#ERN-5011 (Black) #ERN-5021 (Black)
#ERN-5224 (24 wrenches) Portable, #ERN-5012 (Blue) #ERN-5022 (Blue)
Vertical,
SPECIAL $14.99 & Compact YOUR CHOICE YOUR CHOICE

#ERN-5230 (30 wrenches) $9.99 $5.99

SPECIAL $19.99

“SPACE-SAVER” 16 PIECE WRENCH LOW PROFILE RAILS 12 PIECE SCREWDRIVER
WRENCH ORGANIZER SETS ORGANIZERS ORGANIZERS
Fits in even the shallowest drawers
Holds Up To 40 Wrenches! Slotted for hanging. & Will Never Slip! Slotted for hanging.
• Forward/Reverse teeth fits more wrenches.
#ERN-5060 (Red) #ERN-6040 (Screwdriver) #ERN-5090 (Red)
• Trims easily for a custom fit.
OR - Holds up to OR
#ERN-6014 (Red) 14 Screwdrivers
#ERN-6015 (Black) #ERN-5061 (Black) MSRP $11.95 #ERN-5091(Black)
SPECIAL
YOUR CHOICE YOUR CHOICE YOUR CHOICE
$9.99
$9.99 $4.99 $4.99

STUBBY WRENCH 2 PIECE WRENCH #ERN-6050 (Wrench) 3 PIECE SCREWDRIVER
“GRIPPER” ORGANIZERS RAIL ORGANIZERS RAIL ORGANIZER
- Holds up to 30 Wrenches
#ERN-5074 (10 tooth Red) Holds up to 20 wrenches. - Graduated design Holds up to 20 screwdrivers.
#ERN-5075 (10 tooth Black) Cut to fit different sizes. MSRP $19.95 Cut to fit different sizes.
#ERN-5076 (11 tooth Red) SPECIAL
#ERN-5077 (11 tooth Black) #ERN-6012 (Red) #ERN-6010 (Red)
$16.99
YOUR CHOICE OR OR

$6.99 #ERN-6013 (Black) #ERN-6011 (Black)

YOUR CHOICE YOUR CHOICE

$6.99 $7.99

"GRIPPER" WRENCH ORGANIZERS “GRIPPER”
SCREWDRIVER ORGANIZER
"GRIPPER" flexible teeth provide wrench security for travel. Includes a flexible handle and it hangs on a wall.

7-TOOTH 9-TOOTH 11-TOOTH 15-TOOTH #ERN-5310

1/4” to 5/8” / 6-12mm 1/4” to 3/4” / 6-15mm 1/4” to 7/8” / 6-16mm 1/4” to 1-1/8” / 6-20mm SPECIAL

#ERN-5080 (Red) #ERN-5084 (Red) #ERN-5086 (Red) #ERN-5088 (Red) $6.99
#ERN-5081 (Black) #ERN-5085 (Black) #ERN-5087 (Black) #ERN-5089 (Black)

YOUR CHOICE YOUR CHOICE YOUR CHOICE YOUR CHOICE

$4.99 $5.99 $6.99 $7.99

TM SHOP SERIES: Ball Bearing Drawer Slides

NON-SLIP Exceptional value at an Economical Cost!
DRAWER LINER ROLLS • Features: 500lb capacity casters & 25lb capacity drawer slides.

Designed to Protect both your • All models are 26” Wide. Vary in Height & Depth.
Tool Storage Unit & the Tools Themselves. • Also Available in Red (ie #WAT-SCA265RDB)

CHESTS • Also Available w/ Friction Drawer Slides (ie #WAT-SCA265RDF)
** Friction only come in Red. Part Numbers & Pricing Differ. **
#WAT-SPLINER17BK
4-Drawer Chest 4-Drawer Cabinet
(16.5” W x 157” D)
SPECIAL #WAT-SCH264BKB #WAT-SCA264BKB

$29.99 MSRP $183.60 MSRP $220.91
SPECIAL SPECIAL
CABINETS
$139.99 $169.99
#WAT-SPLINER23BK
5-Drawer Chest 5-Drawer Cabinet
(22.5” W x 115” D)
SPECIAL #WAT-SCH265BKB #WAT-SCA265BKB

$19.99 MSRP $218.58 MSRP $294.44
SPECIAL SPECIAL
PORTABLE ORGANIZERS
$164.99 $219.99
Durable Construction & Organization
for Tools in a Compact Mobile Design. 2-Drawer Intermediate 5-Drawer Tool Center
+ Includes chest & cabinet
PLASTIC #WAT-SIN262BKB + 300lb capacity casters

#WAT-PP2314BK MSRP $152.96 #WAT-STC265BKB
SPECIAL
(23” W x 10.5” D x 13.5” H) MSRP $265.64
MSRP $84.53 $119.99 SPECIAL
SPECIAL
3-Drawer Cabinet $199.99
$64.99
#WAT-SCA263BKB

MSRP $204.37
SPECIAL

$149.99

#WAT-PP1406BK WATERLOO SERIES PROFESSIONAL SERIES

(14” W x 8” D x 6.3” H) Designed for work environments that need Designed for the work environments where solid construction
high-quality storage at an affordable cost! and high quality features aren’t an option, but a necessity!
$9.99 • Includes: 1,100 lbs capacity 5” x 2” casters,
50lb ball-bearing drawer slides, & non-slip drawer liners. • Includes: full-extension 75lb ball-bearing drawer slides, Posi-Lock
#WAT-PP1709BK Latching System, gas struts for the lid, & non-slip drawer liners.
• All models vary in Height & Depth. • Also Available in Black (ie #WAT-PCA5211BK)
(17” W x 9.4” D x 9” H) • Also Available in Black (ie #WAT-WCA266BK)
26” Wide Models
$15.99 26” Wide Models 6-Drawer Chest
5-Drawer Chest
#WAT-PP2009BK #WAT-PCH266RD
#WAT-WCH265RD
(20” W x 10.3” D x 9” H) MSRP $387.40
MSRP $340.00
$19.99 SPECIAL $284.99
SPECIAL $249.99
#WAT-PP2310BK 3-Drawer Intermediate
6-Drawer Chest
(23.5” W x 11” D x 10” H) #WAT-PIN263RD
#WAT-WCH266RD
$25.99 MSRP $266.21
MSRP $260.51
#WAT-PP2610BK SPECIAL $199.99
SPECIAL $189.99
(26” W x 10” D x 10” H) 5-Drawer Cabinet
2-Drawer Intermediate
$29.99 #WAT-PCA265RD
#WAT-WIN262RD
3-DRAWER METAL MSRP $621.93
#WAT-MP2012BK MSRP $223.78
SPECIAL $454.99
(20” W x 9” D x 12” H) SPECIAL $164.99
41” Wide Models
$69.99 5-Drawer Cabinet 8-Drawer Chest

#WAT-WCA265RD #WAT-PCH418RD

MSRP $396.67 MSRP $1150.11

SPECIAL $289.99 SPECIAL $839.99

6-Drawer Cabinet 11-Drawer Cabinet

#WAT-WCA266RD #WAT-PCA4111RD

MSRP $538.33 MSRP $1644.22

SPECIAL $394.99 SPECIAL $1199.99

41” Wide Models 52” Wide Models
8-Drawer Chest 8-Drawer Chest

#WAT-WCH418RD #WAT-PCH528RD

MSRP $714.58 MSRP $1601.20

SPECIAL $524.99 SPECIAL $1169.99

11-Drawer Cabinet 11-Drawer Cabinet

#WAT-WCA4111RD #WAT-PCA5211RD

MSRP $1180.18 MSRP $2880.97

SPECIAL $824.99 SPECIAL $2099.99

PROJECT CENTER 500lbs. CAPACITY 2-IN-1 DOOR BUMPER DOLLY TM
WORKBENCH/SCAFFOLD
• Weight Capacity: 300lb & 25lb draw- • Support, Remove, Install, & Transport 4.5” DEEP SHOP CART
ers. • Extends to two different heights: 21" & CAN RACK
• Small-Parts Storage & Organization, 32". Automotive Doors Safely & Efficiently.
under removable work surface. • Workbench MDF work surface can be • Hand Crank Adjustable Arms also Support • 14.5 ”(L) x 2.5” (W)
• Steel Sides include Peg Holes. used for hammering, drilling, and wood-
working. Also provides tool tray, ruler & Various Bumpers, Hoods, & Panels #VIM-P95
5-Drawer (29” W x 20” D x 34.5” H) protractor graphics. • Adjustable Height: 27.5” to 51”
Features: UL Approved power strip MSRP $50.16
w/ 6ft cord, power tool holder, #AST-55600 • Lift Base w/ Rubber Pad avoids damage to SPECIAL
& battery charger storage. metal, and adjusts 7” to 31” from the floor.
MSRP $285.55 $39.99
#WAT-SPPC5BK-P • Additional Features: Wide Base for Stability,
SPECIAL Heavy-Gauge Steel Construction, 220lb CAPACITY ADJUST-
MSRP $322.62 ABLE WORK TABLE
$199.99 & (4) Locking Casters. w/ DRAWER
SPECIAL
• Designed to house working air tools, plus
$239.99 standard screwdriver/pry-bar holder.
• 1” deep drawer.
#AST-7307

MSRP $250.00

SPECIAL

$199.99

#SUN-8019

MSRP $216.99
SPECIAL

$139.99

350lb Capacity Service HEAVY-DUTY 2-SHELF PLASTIC UTILITY CART Compact Slide Top
Cart w/ Locking Top & Utility Cart
 Size: 16” (W) x 30” (L) x 31” (H) & only 21lbs!
Locking Drawer  Trays are 4” deep & can hold 300 lbs.  450 lbs. rated capacity
 2 Drawers, 3" deep w/ EVA foam liners.
• 4" wheels, 2 locking and 2 standard. #AST-8330  Large bottom shelf w/ extra clearance.
• 16 gauge steel frame w/ 350 lb. load * Also available in RED #8035R
capacity MSRP $137.55
• 3" deep bottom shelf SPECIAL #SUN-8035
• 35-5/16" (H) x 30" (L) x 16" (W)
$99.99 MSRP $567.99
SUN-8013A (Red) SPECIAL
SUN-8013ABK (Black)
SUN-8013ABL (Blue) $359.99

MSRP $359.99 PRO 500lb Capacity

SPECIAL 5-Drawer Service Cart

$249.99  Features: flip top locking lid, screwdriver / pry
bar holder, side work shelf, EVA foam liners.
 Dimensions: 27"(L) x 40"(H) x 18.25"(W)
 Overall Weight: 117-lbs

Side Work Bench 350lb Capacity Service Cart #SUN-8045 (Red)
• Folds down when not in use. #SUN-8045BK (Black)
• Dimensions: 35"(H) x 30"(L) x 16" (W) #SUN-8045BL (Blue)
#SUN-8004 (Red) • Casters: 4” diameter; 2-Locking
#SUN-8004BK (Black) • Shelf Depths: 3" MSRP $693.99
#SUN-8004BL (Blue) • Weight: 37.5 lbs SPECIAL YOUR CHOICE

MSRP $44.99 #SUN-8005SC $439.99

SPECIAL MSRP $201.99
SPECIAL
$34.99
$149.99
Large Locking Screw Driver/Pry Bar Holder
• Various hole sizes hold up to 26 items.

#SUN-8011 (Red)
#SUN-8011BK (Black)
#SUN-8011BL (Blue)

MSRP $62.99

SPECIAL

$49.99

9pc 10” T-HANDLE ERGO FOLD CLASSIC FOLD
TM WRENCH SETS Allen Wrenches Allen Wrenches

52pc MASTER TORX® Tamper Torx & Torx Key Wrench Set Composite Grip Handles SAE
#EKL-20511 (5pc, 3/16" to 3/8")
SOCKET SET #AST-1023 SAE
#EKL-25611 SPECIAL $9.99
• Includes Torx, Torx-Tamper-Resistant, • T10, T15, T20, T25, T27, T30, T40, T45, &
& Torx-Plus Bits (14pc each): 1/4"dr T6-T30; T50. (6pc, 5/32" to 3/8") #EKL-20812 (9pc Long, 5/64" to 1/4")
3/8" dr T40-T55; & 1/2" dr T60
• Plus Torx External Sockets (12pc) : 1/4" dr E4- SPECIAL $11.99 SPECIAL $9.99
E8; 3/8" dr E10-E20; & 1/2" dr E22-E24.
#EKL-25911 #EKL-20911 (9pc Short, 5/64" to 1/4")
#OTC-5900A Hex Key Wrench Sets (Ball End)
(9pc, 5/64" to 1/4") SPECIAL $6.99
MSRP $129.95 #AST-1025 (SAE)
SPECIAL SPECIAL $9.99 #EKL-20912 (9pc, .050" to 3/16")
• 5/64, 3/32, 1/8, 5/32,
$119.99 3/16, 1/4, 5/16, 3/8 & 1/2. #EKL-25912 SPECIAL $5.99

Comfort Grip T-Handle #AST-1026 (Metric) (9pc, .050" to 3/16") METRIC
Hex Key Sets #EKL-21151 (6pc, 3mm to 10mm)
• 2mm, 2.5mm, 3mm, SPECIAL $7.99
#TIT-12768 (8pc SAE) 4mm, 5mm,6mm, 8mm, SPECIAL $10.99
10mm & 12mm. METRIC
• Set Includes: 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, #EKL-25161 #EKL-21171 (7pc, 1.5mm to 6mm)
3/16”, 7/32”, & 1/4” SPECIAL YOUR CHOICE $44.99
MSRP $14.99 (6pc, 3mm-10mm) SPECIAL $5.99
SPECIAL Extra Long Arm
L-Key Sets SPECIAL $12.99 #EKL-21172 (7pc, 2mm to 8mm)
$12.99
• Extra long design for maximum torque. #EKL-25171 SPECIAL $7.99
#TIT-12769 (6pc Metric) • Ball tips on long arm for confined areas.
• Textured finish for better grip. (7pc, 1.5mm-6mm) TORX
• Set Includes: 2, 2.5, 3, 4, 5, & 6mm #EKL-22571
MSRP $12.99 #TIT-12713 (13pc SAE) SPECIAL $7.99
SPECIAL (7pc., T10-T40)
+ 0.05”,1/16”,5/64”,3/32”, #EKL-25181 SPECIAL
$10.99 7/64”,1/8”,9/64”,5/32”,3/16”,
7/32”,1/4”,5/16”,&3/8". (8pc, 2mm-10mm) $14.99

SPECIAL $24.99 SPECIAL $11.99 #EKL-22572

BIT SOCKET SETS #TIT-12714 (9pc Metric) TORX (7pc., T6-T20)
#EKL-25581 SPECIAL
• Anodized magnetic aluminum socket rail + 1.5,2,2.5,3,4,5,6,8,&10mm
• S2 alloy steel bits for strength and durability (8pc., T8-T40) $14.99
SPECIAL $19.99
#TIT-16122 SPECIAL $16.99 L-KEY SETS
#TIT-12715 (18pc Star)
13pc STAR Bit Socket Set 22pc COMBO MM / SAE L-KEY SETS Packaged in Plastic Molded Holders
+ 1/4" Dr. - T10, T15,T20, T25, T27 + T6-T10,T15,T20,T25,T27, Packaged in Plastic Molded Holders
+ 3/8" Dr. - T40, T45, T47, T50 T30,T40,T45,&T50 SAE
+ 1/2" Dr. - T60 & T70 #EKL-10122 (Short) #EKL-10113
SPECIAL $29.99
SPECIAL Short Series
39pc Long Arm (13pc, .050"-3/8")
Allen Wrench Set $19.99
SPECIAL $9.99
#TIT-16123 • Features a 3-way storage holder. #EKL-10222 (Long)
• (12) SAE - 1/16" to 3/8" #EKL-10213
13pc SAE Hex Bit Socket Set • (13) Metric- 1.27mm to 10mm SPECIAL
+ 1/4" Dr. - 5/64", 3/32", 7/64", 1/8", 9/64",5/32" • (14) Torx - T6 to T55 Long Series
+ 3/8" Dr. - 3/16", 7/32", 1/4", 5/16", 3/8" $24.99 (13pc, .050"-3/8")
+ 1/2" Dr. - 7/16" & 1/2" #TIT-12739
#EKL-13222 (Ball End) SPECIAL $12.99
SPECIAL
SPECIAL #EKL-13213
$24.99
$39.99 Ball End Series
(13pc, .050"-3/8")
T-KEY SETS
SPECIAL $19.99
Packaged in Plastic Pouch
METRIC
POWER-T Sets #EKL-10509

#EKL-60611 Short Series
(9pc, 1.5-10mm)
(11pc SAE)
6”-Series: 5/64" to 3/8" SPECIAL $9.99

SPECIAL $57.99 #EKL-10609

#EKL-64608 Long Series
(9pc, 1.5-10mm)
(8pc Metric)
6”-Series: 2-10mm SPECIAL $11.99

SPECIAL $44.99 #EKL-13609

#EKL-68691 Ball End Series
(9pc, 1.5-10mm)
(11pc TORX)
Sizes: T6-T50 SPECIAL $17.99

SPECIAL $79.99 7pc TORX L-KEY SETS

#TIT-16124 25pc HEX KEY SET Cushion Grip Sets Packaged in a Plastic Molded Holder
Sizes: T10 to T40
13pc METRIC Hex Bit Socket Set • SAE Sizes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, #EKL-53610
+ 1/4" Dr. - 2, 2.5, 3, 4, 5,5.5mm 5/32, 3/16, 7/32, 1/4, 5/16 & 3/8" #EKL-10907 (LONG Series)
+ 3/8" Dr. - 6, 7, 8, 9, 10mm (10pc SAE)
+ 1/2" Dr. - 11 & 12mm • METRIC Sizes: 1.27, 1.5, 2, 2.5, 3, 4, 4.5, 5, 6”-Series: 3/32" to 3/8" SPECIAL
5.5, 6, 7, 8 & 10 mm
MSRP $56.24 SPECIAL $44.99 $19.99
• Heat treated carbon steel w/ black oxide finish.
SPECIAL YOUR CHOICE $39.99 #EKL-55168 #EKL-10007 (Ball-End)
#TIT-12712
(8pc Metric) SPECIAL
SPECIAL 6”-Series: 2-10mm
$19.99
$9.99 SPECIAL $39.99

4pc HOOK & PICK SET 12pc Precision Pick & 2pc O-Ring & Hook TM
Scribe Set
• Comfortable TPR sure-grip handles. Screwdriver Set SCREWDRIVER SETS
• Chrome plated shafts. • Great for scribing metal, picking "O" rings &
• Includes: Curved, 90°, Offset, & Straight. • Chrome plated chrome-vanadium steel shafts parts from hard to reach areas. 6-IN-1 SCREWDRIVER
w/ Comfortable TPR grips • (1) Combination pick and hook pick Slot, phillips and nutdriver.
#TIT-32976 (6”) • Comes w/ Plastic Tray & Nylon Storage Pouch. • (1) 90 degree pick and straight pick
• (4) Picks: Straight, 90°, and 1/4" & 1/8" radius. • Knurled handles for better grip #IMP-18-SD6N2
*Available in a 6pc display pack. • (2) Phillips Screwdrivers: #000 & #00.
• (2) Slotted Screwdrivers: 3/32" & 1/8". #TIT-17702 $5.99
SPECIAL • (4) Torx drivers: T5, T7, T8 & T10.
SPECIAL 8pc SCREWDRIVER SET
$4.99 Assorted slot,
$4.99 phillips screwdrivers..
#TIT-17223 (10.5”)
#TIT17612 MINI Tube Bender #IMP-18-SD8N
SPECIAL
MSRP $36.22 • Compact Design for tight applications. $9.99
$14.99 SPECIAL
• Works w/ brass, copper, steel or aluminum. 22pc SCREWDRIVER SET
#TIT-17221 (16”) $29.99 • Bends the following sizes: Assorted slot and Phillips screwdriver,
Torx screwdrivers, scratch awl,
SPECIAL + 1/8”, 3/16”, & 1/4” O.D. screw starter,
stubby screwdrivers
$59.99 #TIT-51503 and tack puller;
all w/ neon handles.
LONG REACH MSRP $19.76
HOOK & PICK SET SPECIAL #IMP-18-SD22M
$14.994pc Seal & O-Ring
Stainless steel w/ 9-1/2” overall length. $14.99
Remover Set
#TOO-13920 • Allows for easy removal of seals & o-rings w/out

MSRP $23.45 damaging the seal or the finished surface.
SPECIAL
• Set Includes:
$19.99
+ (2) Contoured Tip & (2) Spoon Tip TUBING BENDER
5lb Magnetic Pickup Tool + Lengths: 5-1/2” & 8-1/2”
Bends 1/4",5/16" and 3/8"
• Features a powerful magnet w/ shielded sides + CRV Steel Shaft
for targeted pick-ups.
• Telescopes from 6-1/2" to 33" #IMP-45-TB3H EXTENDABLE QUICK
*Available in 20pc counter display
$14.99 RELEASE RATCHETS
#TIT-11663
#TIT-17004 • Push Button, Quick-Release Head.
SPECIAL • Telescopes in 5 Increments
MSRP $21.93
$4.99 SPECIAL #TIT-12075 (1/4”) #TIT-12070 (3/8”)

16lb Magnetic Pickup Tool $14.99 + 6” to 7-7/8” + 8-1/2” to 12-1/2”

• Telescopes from 7-3/4” to 30” SPECIAL SPECIAL
• Shielded sides for targeted pickups
• Comfortable textured cushion grip $19.99 $24.99
• Carded Display w/ Hang Tab
*Available in 20pc counter display MIGHTY WORM Tubing Benders & Pliers #TIT-12074 (1/2”) #TIT-12073 (1/2”)
Magnetic Pickup Tool
#TIT-11190 Enough leverage to bend + 12” to 17-1/2 + 18” to 24”
• 5mm Magnetic Head 3/16”, 1/4”, or 5/16” steel tubing
$6.99 • Flexible 30" Copper Wire SPECIAL SPECIAL
• Pick-up Capacity: 1/2 lb. #IMC-806 (3/16)
INNER TIE ROD TOOL #IMC-808 (1/4) $34.99 $39.99
#IMC-3826 #IMC-809 (5/16)
 Removes inner tie rods without touching outer #TIT-12072
tie rods. SPECIAL SPECIAL
 works on 1.25” to 2” tie rods with flats and YOUR CHOICE (3/4”)
smooth tie rods. $5.99
 works with 3/8” drive tool. $34.99 + 19-1/2" to 30-1/4"

#AST-78812 SPECIAL

SPECIAL $99.99

$11.99 7 PIECE NUTDRIVER SETS Flex-Head O2 Sensor Wrench THUMBWHEEL Ratchets

VARIABLE PIN SPANNER #IMP-18-ND7 (SAE) • Designed for all oxygen sensors with 7/8”. hex. Great for Tight Spots!
WRENCH • Essential clearance for removal/installation of
+ 3/16” - 1/2” oxygen sensors when it is positioned upward #IMC-61402 (1/4")
• Universal Design, adjustable from 1-1/4”- 5”. and inward to the floorboard or when leverage is #IMC-63802 (3/8")
• Works w/ a 1/2” drive ratchet or breaker bar. #IMP-18-ND7M (MM) needed around an exhaust pipe.
• Comes w/ 3.5mm, 4mm, 4.5mm, 5mm, 6mm, YOUR CHOICE
7mm, & 10mm pins. + 5mm - 12mm #CAL-843
$6.99
#OTC-6613 $7.99 MSRP $37.41
SPECIAL STEEL TAPE MEASURES
SPECIAL
$29.99 #IMP-26-MT12
$89.99
CAULKING GUNS DOOR SPRING TOOL (½" X 12’)

#IMP-45-CGK • Designed to quickly & easily remove or install #IMP-26-MT16
car door hinge springs.
(Skeleton Body) • Services GM cars and GM light duty trucks. (¾" X 16’)
OR • Use w/ a 1/2" open end or ratcheting box
wrench. YOUR CHOICE
#IMP-45-CGR
#TIT-15040 $4.99
(Ratchet Type)
SPECIAL 4pc TAPE MEASURE SET
YOUR CHOICE
$9.99 Comes w/ the Following Sizes: 12 ft x 5/8”, 16
$4.99 ft x 3/4”, 25 ft x 1”, & 33 ft x 1”

MAGNIFYING GLASS 0-1" DIAL INDICATOR #TIT-17504

• 2.2x magnification #IMP-26-DI1 MSRP $22.16
• TPR rubber grip handle & framing SPECIAL
• Lens diameter 2-7/8” w/ OAL 7-1/4”. Graduations 0.001"
$14.99
#TIT-15029 (w/ LED LIGHT) $14.99
6 PC. TELESCOPING
SPECIAL MAGNETIC BASE GAUGE SET
• 77 lbs of Holding Power
$14.99 • On and Off switch. Measurements are
read with a
#TIT-15038 #IMP-26-MB micrometer.
Covers sizes 0-6".
SPECIAL $19.99
#IMP-26-TG6
$9.99
$24.99

3pc HANDLED PRY BAR SET PRY BAR HEAD 4 PIECE PRY BAR SETS

TM Made of tempered square steel that you can hit • Turns any 3/8” drive ratchet or breaker bar into • #PB4 - features screwdriver type handles and
a rolling head pry bar. has sizes 8",12",18" & 24".
JIMMY BARS without damaging the handle! Set includes 12", • Provides the versatility of a pry bar w/out the • #PB40 - features heel-end pry bay style and
18", & 24" bar shank lengths. storage problems. has sizes 6",12",16" & 20"

#OTC-7166 #OTC-7420 #OTC-7687A #IMP-09-PB4

(5/8” diameter, 18" long) (7/8” diameter, 46" long) #OTC-8203 SPECIAL $12.99

$24.99 $79.99 MSRP $70.95 $29.99 #IMP-09-PB40

#OTC-7167 #OTC-7421 SPECIAL HIGH-QUALITY HAMMERS $14.99
w/ RUBBERIZED GRIPS
(3/4” diameter, 24" long) (1” diameter, 54" long) $64.99 3/8" DRIVE IMPACT DRIVER SET
#TIT-63000
$29.99 $99.99 #IMP-18-ISD38
(3lb Sledge)
#OTC-7168 Reversible Impact Driver Set SPECIAL $9.99

(7/8” diameter, 30" long) • Use to loosen and tighten screws, nuts and $19.99
bolts, w/ special handle to reduce risk of injury
$34.99 when striking driver w/ hammer. #TIT-63004
• Has 8 standard & long length
SLEDGE HAMMERS interchangeable bits (3lb Cross-Pein)
SPECIAL
#TOO-14950
$19.99
$29.99

WOOD HANDLE

#IMP-05-SH4 (4 lbs)

SPECIAL $14.99

FIBERGLASS HANDLES 3 Piece Brass Drift Punch Set #TIT-63216 BRASS DRIFT PUNCHES

#IMP-05-SH8F (8 lbs) • For non-marring and non-sparking applications (2lb Brass Non-Sparking) Manufactured from machined round stocks.
• For aligning unhardened steel or aluminum SPECIAL Non-slip knurled handles on some models.
SPECIAL $39.99 • Designed for use on harder surface materials
that will not be damaged by the softer brass $44.99 Chamfered ends.
#IMP-05-SH12F (12 lbs)
punches. #TIT-63233 #WLS-DP112
SPECIAL $49.99
#SKT-6323 (2.5lb Stone Hammer) (1" x 12" drift, knurled)
#IMP-05-SH16F (16 lbs) SPECIAL
MSRP $69.13 $37.99
SPECIAL $59.99 $19.99
SPECIAL #WLS-32
4 LB. HAMMERS
$49.99 (3/4" x 9" drift, knurled)
#IMP-05-CPH4
5pc General Hammer Set $20.99
(Cross Pein)
OR • (1) 16 oz. Ball Pein Hammer #WLS-38

#IMP-05-DH4 • (1) 32 oz. Ball Pein Hammer (3/4" x 11" drift, knurled)
• (1) 32 oz. Rubber Mallet
(Drilling Hammer) $24.99
YOUR CHOICE • (1) 3 lb Cross Pein Hammer
• (1) 3 lb Sledge Hammer #WLS-52
$14.99
28pc TRANFER PUNCH SET (5/8" x 9" drift, knurled)
5pc BALL PEIN
HAMMER SET • Sizes: 3/32"-1/2" in 1/64” increments, plus a $16.99
17/32” punch.
• Drop Forged and Heat Treated. • Made from heat treated & tempered tool steel. #WLS-53
• Durable Fiberglass Handles. • Length: 4-7/8” (.00025 diameter)
• Includes: 8oz, 12oz, 16oz, 24oz, & 32oz. • Comes in a Indexed Stand. (5/8" x 9" drift, tapered)

#IMP-04-BH5F #CEN-3S301B #TIT-63125 $17.99

SPECIAL SPECIAL MSRP $91.00 #WLS-58

$29.99 $39.99 SPECIAL $74.99 (5/8" x 11" drift, knurled)

DEAD BLOW HAMMERS BRASS PUNCH SET (2 PC) BRASS HAMMERS $19.99

#IMP-04-DBH1 Two large brass non-sparking punches ideal for Flame tempered hickory handles. 1/4" STAMP SETS
Non-marring, non-sparking
(1 lb.) $9.99 use near precision parts. solid cast heads. #IMP-10-LP14
- 8” punch (5/8” hex, tapered to 3/8”)
#IMP-04-DBH2 #WLS-H20 (27 piece letter)
- 10” straight punch (3/4” diameter)
(2 lb.) $12.99 *chamfered ends (20 oz. ballpein) $19.99

#IMP-04-DBH3 $34.99 #IMP-10-NP14

(3 lb.) $14.99 #WLS-H56 (9 piece number)

#IMP-04-DBH4 (3½ lb. single jack) $7.99

(4 lb.) $19.99 $79.99 AUTOMATIC CENTER PUNCH

Overall Length 5 inches.

#IMP-10-ACP

$4.99

#OTC-4602

SPECIAL

$39.99

HUBTAMER ELITE BALL JOINT SERVICE SET TM

• Complete solution for servicing wheel hubs and bearings vehi- • Simplifies removal / installation of most press-in ball joints. Universal Hydraulic Flaring Tool Set
cle w/out removing the steering components or knuckle. • Includes: C-frame press, 3 receiver tubes,
• Eliminates unnecessary alignments or use of a shop press. plus removal & installation adapters. • The Kit Fabricates
• Application Guide is the most + GM Fuel Line Flare, Brake & Transmission Lines - 5/16” &
comprehensive hub and bearing #OTC-7249
service guide on the market. 3/8”
MSRP $189.95 + Push Connect 1/4”, 5/16” & 3/8”
#OTC-6575 SPECIAL + Flare/Double Flare - 3/16”, 1/4”, 5/16”, 3/8”, & 1/2”
+ Metric Bubble Flare - 4.75, 6, 8, & 10mm
MSRP $839.95 $169.99
SPECIAL • Comes in Blow Molded Box.
5pc Pickle Fork Ball Joint Separator Set
$639.99 #MAC-71475PRC
• Used to remove ball joints, tie rods, pitman arm.
BEARING RACE & SEAL • One piece design ensures durability, rigidity, and complete MSRP $604.70
DRIVER MASTER SET transfer of hammering forces. SPECIAL
• Includes Sizes (depth): 11/16"(2-3/4"), 15/16"(3"),
Insert wheel bearing race & seals w/out damage to race & axle 1-1/16"(2-7/8"), 1-7/16"(2-3/8"), and 1-5/8"(3-1/8") $499.99
housing. Set includes 9 disks (sizes 1.565” to 3.18”) and driving
handle. Packed in a blow mold storage case. #AST-78807

#AST-7824 MSRP $64.83
SPECIAL
MSRP $66.74
SPECIAL $49.99

$54.99

10pc BEARING DOUBLE FLARING TOOL KIT Master Alternator Pulley
RACE & SEAL DRIVER SET Removal/Service Kit
• Designed for double or single flare in copper, aluminum, soft
Permits installation of tapered bearing races and seals without steel brake line, and brass tubing (to 45 degrees). Includes five  AOD/AOP clutch style pulleys.
damage to the component or housing. Includes a driver handle adapters 3/16" through 1/2" (4.8mm through 12.7mm).  Perfect for Ford, GM, Jeep, BMW,
plus popular bearing and seal drivers, ranging from 1.565" to • Forged yoke made of heat-treated steel. Mercedes, VW, Toyota and more!
3.180". Housed in a blow-molded storage case.  3/8” and 1/2”
#OTC-4503
#OTC-4507 #AST-7878
SPECIAL
SPECIAL MSRP $115.99
$39.99 SPECIAL
$69.99
$99.99

A/C COMPRESSOR 8pc PROFESSIONAL 24pc In-Line Dowel Pin IN-LINE FLARING SETS
CLUTCH REMOVER KIT BRAKE TOOL SET Puller Master Set
• Lines the adapters, cone & tube in a perfect
• FS6, C171, 6P & 148 compressors. Includes: Spring Compressor, Brake Spring Extracts dowels w/out the use of a slide ham- line, making perfect flares every time.
• GM R4 & A6, HR-6, DA-6 and Installer, Spring Removal Tool, Brake Retaining mer, eliminating the cost as well as the effort
V5 compressors. Spring Tool, Brake Spring Pliers, and potential hand injury. Can be used w/ an air • Reduces the chance of the tube slipping, while
• SD505, 507, 510, 575, 708 and (2) Brake Adjustment Spoons, or traditional ratchet. increasing the overall life of the clamp by not
709 compressors: & Mini Adjustment Spoon. wearing the down teeth.
• The 2 & 3 hole puller plate fits most clutches, #CAL-95400 • Slender low profile allows user to make flares
the mechanical force does the pulling. #AST-7848 on the vehicles.
MSRP $296.63
#AST-7886 MSRP $59.68 SPECIAL #CAL-154 (Metric)
SPECIAL
MSRP $45.73 $199.99 - 4.75mm, 5mm, & 6mm
SPECIAL $39.99
OR
$34.99
#CAL-164 (SAE)

- 3/16”, 1/4”, & 5/16”

10pc Fan Clutch 18pc. Brake Caliper Full Coverage MSRP $50.02
Wrench Set SPECIAL
Wind Back Tool Set Disconnect Kit
• 2-1/4" & 3-1/4" Fan Pulley Holding Tool YOUR CHOICE
• 2-3/8" Fan Clutch Bolt Holding Tool • Adaptor plates w/ thrust bolt assembly & • Services many types of Quick Disconnect
• 2-1/8" & 3” Fan Clutch Pulley Holding Tool reaction plate are precisely made, preventing Fittings used on GM, Ford, & Chrysler. $34.99
• 2-13/16" Fan Hub Wrench damaged pistons & seals. • Services Heater Hoses, Transmission Oil
• 1-7/16" Fan Clutch Nut Wrench Coolers, and Air Conditioning & Fuel Lines. 19pc Bushing Driver Set
• 1-7/16" & 1-9/16” Fan Clutch Wrenches
• 1-7/8" Clutch Nut Wrench Left Hand Remove & install bushings ranging from
3/8" to 1-3/8" in diameter.
#AST-7895
• Includes large, medium, & small driver handles
MSRP $191.17 with nuts. Housed in a blow-molded storage
SPECIAL case.

$149.99 #OTC-4505

SPECIAL

$59.99

#AST-78618 #AST-7861

MSRP $70.20 MSRP $54.99

SPECIAL $49.99 SPECIAL $44.99

TM GEAR & BEARING PULLERS FLANGE TYPE PULLER

GRIP-O-MATIC PULLERS Knife like edges fit snugly behind part being pulled. • Pulls harmonic balancers, timing gears,
& other parts having tapped holes.
#OTC-1020 #OTC-1122 • Includes attachment cap screws.

2 jaw; 1-Ton. (Works w/ a 5 ton #OTC-518
2 ⅛" max. reach, 3¼" max. spread Grip-O-Matic or Push-Puller)
MSRP $53.95
$49.99 MSRP $53.95 SPECIAL

#OTC-1022 SPECIAL $49.99 $49.99

2 jaw; 2-Ton. #OTC-1123 PITMAN ARM PULLER
3 ⅜" max. reach, 4" max. spread
(Works w/ a 7 or 10 ton • Adjustable w/ replaceable forged jaws.
$39.99 Grip-O-Matic or Push-Puller) • Two clamp bolts lock jaws on pitman arm.
• Can perform other pulling jobs.
#OTC-1023 MSRP $101.95
#OTC-7311A
Reversible, 2/3 way jaws, 2-Ton. SPECIAL $94.99
3 ⅜" max reach, 4¾” max spread. MSRP $90.95
5 TON BAR TYPE PULLER SPECIAL
$59.99 AND BEARING SEPARATOR SET
$79.99
#OTC-1027 • Combines two popular bearing “splitters" (2" & 3"), four sets of
hex push-puller legs and a bar-type puller
Reversible, 2/3 way jaws, 5-Ton. head w/ a 9/16" forcing screw.
5½" max. reach, 7" max. spread • Includes blow mold case.

$79.99 #OTC-4518

#OTC-1035 MSRP $142.95
SPECIAL
2 jaw; 7-Ton.
5" max. reach, 9" max. spread $129.99

$99.99 MULTI PURPOSE BEARING 5pc Alternator Decoupler Pulley Kit
AND PULLEY PULLER SET
#OTC-1038 • Remove & Install many ADP’s on popular vehicles in N. America.
• Set includes drop-forged components, • To remove these pulleys, the shaft coming from the alternator needs
Long, 2/3 way jaws; 7-Ton. used in a variety of combinations. to be locked in place while the pulley is spun either clockwise or
8¾" max. reach, 11" max. spread • Spread: 3" to 5". counter clockwise, depends on manufacturer.
• Reach: 1" to 2-1/4". Set Includes the Following:
$119.99 • Blow molded storage case. H22 x 33T, H17 x H19, H10 x 70mmL,
12mm x 75mmL x T50, & Spline M10.
#OTC-1041 #OTC-4534
#CAL-756
2/3 way jaws, 13-Ton. MSRP $224.95
11" max. reach, 12" max. spread SPECIAL MSRP $29.93
SPECIAL
$299.99 $199.99
$19.99
PILOT BEARING PULLER
w/ SLIDE HAMMER PILOT BEARING PULLER HARMONIC BALANCER PULLER

Removes bearings or bushings on flywheel, pump, generator, • Removes pilot bearings & bushings from flywheel during clutch • Works on harmonic balancers, crankshaft pulleys,
etc. Includes 1/2in. to 1-3/8in. (13mm to 32mm) I.D. capacity replacement. Puller has fingers w/ a 1½" length. steering wheels, and gear pulleys.
jaws, & a 3lb. Slide Hammer • Positive engagement design locks • Also works on tapped flywheels of
tips of fingers behind bearing while electric or two-cycle motorcycles.
#CAL-28 expanding against inner diameter
to grasp bearing firmly. #AST-7846
MSRP $62.17
SPECIAL #ALL-648619 MSRP $76.32
SPECIAL
$39.99 MSRP $46.17
SPECIAL $59.99

$44.99

13pc Slide Hammer Puller Set 9-Way Slide Hammer Puller Set 10-Ton Straight Bar Puller Set

• Combination Puller w/ 5-lb Malleable Steel Slide Hammer. • Pulls flange-type rear axles and most front-wheel drive hubs. • (1) 7" Short Forcing Screw
• Drop-Forged Steel Pullers & Attachments. • Internal and external jaws provide a variety of combinations. • (1) 12" Forcing Screw
• Fully-Hardened Shaft & Accessories. • Two & Three-way cross blocks and cone. • (2) Cap Screw Jaws w/ 15/16" Reach
• Converts into a 2 or 3 Jaw Internal/External Puller • Grip wrench adapter and a dent puller attachment. • (2) Double Reach Wide Jaws w/ 8" Reach
for Reaching Tight Areas. • (2) Double Reach Narrow Jaws w/ 8" Reach
#OTC-4579 • (2) Extra Narrow Jaws w/ 8" Reach
#IMP-16-SHP13 *rated @ 5-tons
MSRP $139.95 • (1) 10" Spread
$74.99 SPECIAL • (3) Spring Clips

$129.99 #IMC-4210

PULLEY PULLER & INSTALLER KIT Power Steering & Alternator MSRP $199.76
Pulley/Puller Installer Kit
Removes pressed-on alternator and power steering pulleys on SPECIAL$149.99
late model GM, Ford & Chrysler engines. Installs late model GM All tools necessary for most
alternator and power steering pulleys including Quad 4. power steering pump pulleys, 5-Ton Straight Bar Puller Set
including adapters for GM Quad 4
#AST-7874 and 3.1L and • (1) 9” Spread
Ford 4.6L modular • (2) Cap Screw Jaws w/ 3” Reach
MSRP $30.23 engine pulleys. • (2) Wide Jaws w/ 5” Reach
SPECIAL • (2) Narrow Jaws w/ 5” Reach
#ALL-648605 • (1) 9-3/4" Forcing Screw
$24.99 • (1) 10" 2-Way Cross Arm
MSRP $54.36
SPECIAL #IMC-4205

$49.99 MSRP $54.38
SPECIAL

$39.99

BLUE COBRA™ WHEEL ARM™ SET UNIVERSAL TM
Wheel Weight Hammer
Truck Tire Demounting Tool Kit SAVE TIME & SAVE YOUR BACK! FIBERGLASS HANDLED
• Designed to hold the tire at lift arm height, Provides 34% Larger Strike Area BEAD BREAKER WEDGE
 In SECONDS this tool will Demounts nearly providing easy accessibility for the mechanic than typical wheel weight hammers!
any 20”, 22.5” & 24.5” tube-type & tubeless truck when putting-on or taking-off tire from the • Ideal for 16” to 24.5” diameter wheels. • Overall Length = 32”
tires, up to 13” wide wheel. vehicle. • The 28oz Cast Steel Head w/ ANTI-MARRING • Weight = 11 lbs
 Includes Leather Wheel Protector; prevents • Ideal for tire rotations & brake jobs. replaceable hammer face, is safe for use on
scratches to painted, aluminum, & alloy wheels. • Adjustable design - horizontally & vertically so Steel, Aluminum, & Chrome. #KEN-35429
it can be used on lift arms of varying thickness. • Replaceable chromoly steel hook removes
#KEN-35440 ALL clip-on wheel weights: lead, zinc, & steel! MSRP $139.94
+ Adjusts by hand from 3” to 5” wide, & tight- - no modification needed. SPECIAL
MSRP $428.47 ens on the frame w/ a allen wrench. • Fiberglass Handle, 4x’s stronger than wood.
SPECIAL • Comes w/ (2) 100lb Capacity Wheel Arms & *Refurbish Kit Available Separately #35360. $119.99
(2) Magnetic Trays, that will hold any loose
$339.99 items. #KEN-35359 Dual Wheel Lug Stud
Remover
Full Service Kit #OME-92100 MSRP $56.67
Includes: Classic Tubeless Tire Iron, Double- SPECIAL • Use w/ a standard 1-1/2” socket or wrench, to
End Tire Spoon, 8# Bucket Euro Past Lube, SPECIAL remove the 13/16” flanged square drive inner
Euro-Style Lube Application Brush, Aluminum C $49.99 cap nuts, which secure the inside dual wheels
-Lok™ Bead Holder, & Leather Wheel Protector. $149.99 on truck and trailers.
4pc HD Inner Budd Nut & • Self-Tapping Splines, only require
#KEN-35442 Wheel Stud Removal Set a dead-blow hammer.

MSRP $569.99 • Patented, internal tapered reverse threads #KEN-30165
SPECIAL locks onto damaged nut and easily pulls off
using impact wrench. MSRP $83.14
$419.99 • Wheel Stud Sizes: 5/8”, 3/4” SPECIAL
• Budd Nut Removers: 1-1/8” Inner Nut Left
DUAL WHEEL SEPARATOR 16pc LOCKING LUG Hand Thread & 1-1/8” Inner Nut Right Hand $74.99
MASTER KEY SET Thread.
Ideal for removing stuck or frozen THE GRABBER
dual steel wheels. • Designed explicitly for the purpose of removing #KEN-30649
locking lug nuts on aftermarket wheels, and Clamping Valve Core Removal Tool
• Innovative “One-piece” Pusher is ball bearing you’ll be hard pressed to find an aftermarket MSRP $95.96 • Extendable Collet securely clamps onto valve
driven & heat treated won’t fall apart during use. wheel you can’t remove with this set! SPECIAL core, and remains in jaws once
• Comes with both standard (SAE) and metric unscrewed.
• Forcing Screw & Pullers pieces that can be used on Spline, Star, Hex $84.99 • Made of Stainless Steel, & Works on nearly all
both have 1-1/8” x 11 threads. and Fluted Hex fasteners. Automotive & Industrial Valve Cores!
• The Kit Includes (2) pullers to • Includes a durable blow-molded
cover both large & small applications. plastic case w/ product key. #AST-9512

• Use w/ air impact wrench. #STL-78537 SPECIAL

#KEN-34549 MSRP $144.99 $9.99
SPECIAL
MSRP $249.96 4pc Lug Nut Remover
SPECIAL $99.99 Impact Socket Set

$199.99 • For removing wheel locks & damaged lug nuts.
• Patented, internal tapered reverse threads
INFLATOR GAUGES Inflator, Deflator & locks onto damaged nut and easily pulls off DIGITAL TIRE TREAD
Tire Pressure Gauges using 1/2” impact wrench. DEPTH GAUGE
DELUXE • Sizes: 3/4”, 13/16”, 1”, & 1-1/8”.
 Range: 10-120 PSI (2lb steps) Equip w/ a 1” Hose & Rubber Protective Sleeve. • Range 0-1" / 0-25mm
 Dual-Head Chuck w/ 12” Hose #KEN-30254 • .0005" / .01mm graduations
DIGITAL
#TFL-17850 • The 3.5” LCD screen displays MSRP $59.96 #CEN-3S401
KG, PSI or BAR measurement. SPECIAL
SPECIAL • Measuring Range: 3~175psi MSRP $38.02
$49.99
$39.99 #AST-3018 SPECIAL $34.99

FlexZilla® Hose MSRP $115.95 9pc 1/2" Drive Wheel Lock Digital Tire Pressure
 Straight-On Chuck w/ 12” Hose SPECIAL Removal Impact Socket Set & Tread Depth Gauge
 Range: 20-170 PSI
+ 2psi Increments. $89.99 • Easily removes lug nuts and wheel locks • Proper tire inflation maximizes performance and
 Inlet: 1/4” FNPT on most domestic and import passenger fuel economy, which is easy to
3-1/8” DIAL vehicles and light trucks. monitor with the large backlit
#LEG-AL2000FZ #AST-3081 • Made of CR-MO alloy steel. digital display and comfort
- Measuring Range: 0-180psi • Use with hand driver grip design of this durable gauge.
SPECIAL MSRP $74.20 or impact wrench.
SPECIAL #TFL-17557
$39.99 #SUN-2840
$59.99 SPECIAL
ECONOMY MSRP $87.99
 20" overall length #AST-3082 SPECIAL $14.99
 Dual head chuck
 Range: 20-140 psi - Stainless Steel Braided Hose $64.99 Pocket Digital Tire Pressure
- Measuring Range: 0-65psi and Auto Emergency Tool
#TIT-19341 MSRP $81.23 Tire Compressor
SPECIAL • Measure Tire Pressure (PSI, BAR, & KPA):
SPECIAL + Pressure: 150psi MAX • Emergency Tools: steel window escape ham-
$64.99 + Self-Stored Cable & Hose mer, & recessed blade to cut through seatbelts.
$14.99 • (2) LED Lights: a bright white light & a red light.
#AST-7790
#AST-3088
SPECIAL
SPECIAL
$24.99
$19.99

TM 8pc SAE RATCHETING 7pc METRIC RATCHETING 10pc STUBBY
WRENCH SET
Individual GearWrench® WRENCH SET WRENCH SET
Ratcheting Wrenches • Needs As Little As 5° to Move Fasteners.
• Sizes Included: 5/16" to 3/4 • Needs 5° vs 30° to Move Fasteners. • Sizes Include: 10mm to 19mm
Complete your Sets w/ the Full Line of Sizes. • Sizes Included: 8,10,12,13,14,15,18mm ***NON-RATCHETING***
“The Original” #KDT-85599
#KDT-9417 #KDT-81904
SAE Size Range = 1/4” to 1-1/4” MSRP $132.23
METRIC Size Range = 6mm to 34mm SPECIAL MSRP $104.31 MSRP $132.51
SPECIAL SPECIAL
$99.99
$69.99 $89.99

PLUS MORE STYLES 7pc Ratcheting SAE Set 8pc Reversible Ratcheting 7pc Stubby Ratcheting
SAE Set SAE Set
XL Combination • Sizes Included: 5/16" to 3/4
• Sizes Included: 5/16" to 3/4 • Sizes Included: 3/8” to 3/4”
Stubby & Stubby-Flex #KDT-9317
#KDT-9533N #KDT-9507
Reversible & Flex-Head MSRP $104.31
SPECIAL MSRP $157.97 MSRP $133.15
XL Locking Flex/ XL X-Beam/ XL GearBox SPECIAL SPECIAL
$69.99
XL Spline E-Torx $109.99 $89.99

QuadBox™ Double Box

Screwdriver Combo Sets

5pc Sets 8pc Ratcheting SAE Set 8pc Reversible Ratcheting 10pc Stubby Ratcheting

#KDT-80052 (Phillips) • Sizes Included: 5/16" to 3/4 Metric Set Metric Set

MSRP $58.02 #KDT-9308 • Sizes Included: 8mm to 19mm • Sizes Included: 10mm to 19mm
SPECIAL
MSRP $137.73 #KDT-9543
$34.99 SPECIAL
MSRP $139.84 #KDT-9520
#KDT-80053 (Slotted) $89.99 SPECIAL
MSRP $193.79
MSRP $64.37 $89.99 SPECIAL
SPECIAL
$129.99
$34.99

12pc Set 12pc Ratcheting Metric Set 12pc Reversible Ratcheting Industrial Grade

#KDT-80051 • Sizes Included: 8mm to 19mm Metric Set Hand Held Bolt Cutter

MSRP $120.34 #KDT-9412 • Sizes Included: 8mm to 19mm • New Design features a better ergonomics and
SPECIAL requires less cutting force.
MSRP $204.02 #KDT-9620
$94.99 SPECIAL > 30% less force than standard bolt cutters
MSRP $256.16 > 50% less force than standard linesman
20pc Master Set $133.99 SPECIAL pliers.
• Meets/exceeds Knipex & Bahco force to cut.
#KDT-80066 $169.99
#HKP-0890MC
MSRP $164.51 16pc Ratcheting Metric Set 13pc Reversible
SPECIAL MSRP $57.96
SPECIAL
$129.99
$49.99
GIMBAL RATCHETS
• Sizes Included: 8mm to 24mm Ratcheting SAE Set
Allows Ratchet to Pivot in
Two Directions for Easier Access #KDT-9416 • Sizes Included: 5/16" to 1” COMPLETE SOCKET SETS
• 72-Tooth Ratcheting Mechanism for 5°Swing Arc
• Anodized Aluminum Finish MSRP $353.82 #KDT-9509 1/4” Set Includes 51-Pieces:
• Easy to Use Forward/Reverse Lever SPECIAL • SAE Sockets: Std. & Deep 3/16" - 9/16"
MSRP $373.20 • METRIC Sockets: Std. & Deep 4mm -15mm
#KDT-81027 (1/4”) $239.99 SPECIAL • 1/4" Drive Full Polish Teardrop Ratchet.
#KDT-81270 (3/8”) • 1/4" Thumbwheel Ratchet.
$249.99 • 2" & 6" Extension Universal Joint.
SPECIAL
21pc GearRatchet™ 15pc Serpentine Belt Tool Set #KDT-80300
$19.99 SAE/MM VORTX SET
• Provides coverage for all USA and import cars. MSRP $195.29
PIVOT FORCE Next Generation of Ratchets and Sockets. • Unlimited access to Serpentine pulley tension arms SPECIAL
Includes the Following: w/ added attachments for better coverage.
8” Cutting Compound Action Pliers $134.99
Requires 40% Less Effort To Cut! + (17) sockets - 3/8” to 3/4" & 10mm to 19mm #KDT-3680
+ (2)drive adapters 1/4" & 3/8" 1/4” Set Includes 51-Pieces:
• Professional Easy-Clean Dipped Grips MSRP $119.56 • SAE Sockets: Std. 1/4"-1" & Deep 1/4"-7/8"
• Forged Steel for Superior Strength and Dura- + (1) 3" Hole-through Extension SPECIAL • METRIC Sockets: Std. & Deep 6 - 19mm
bility + (1) GearRatchet handle • 3/8" Drive Full Polish Teardrop Ratchet.
• Anti-Rust Coating $94.99 • 3/8" Drive Stubby Full Polish Ratchet.
• Induction Hardened Cutting Edge for Long Life #KDT-8921 • 3" & 6" Extension Universal Joint.
2-Position Ratcheting
#KDT-82120 (Diagonal) MSRP $83.46 Overall height is Screwdriver w/ LED #KDT-80550
#KDT-82121 (Lose Nose) SPECIAL reduced by as much
• Forward, Reverse and Lock Positions. MSRP $228.87
SPECIAL YOUR CHOICE $64.99 as 50%,width by 20%. • Includes Six Bits, that are stored in the handle. SPECIAL

$24.99 + Phillips(2) & Torx(4) $159.99
• 2-Position Handle - Straight or Pistol Grip
• Features: (2) Built-in LEDs & Magnetized Bit Tip.

The ultra thin Vortex™ #KDT-82788
pass-thru socket and
MSRP $41.39
extension design will reach SPECIAL

into deep recesses makin deep sockets obsolete. $34.99

COMBINATION WRENCH SETS 14pc SAE ANGLE HEAD 6pc JUMBO WRENCH SET TM
WRENCH SET
• Heat treated alloy steel, highly polished • These JUMBO wrenches have raised panels COMBINATION WRENCHES
chrome plated, & w/ a lifetime guarantee. Sizes: 3/8" to 1-1/4" and are ideal for working on trucks.
• 14pc SAE: 3/8" to 1 1/4" • Sizes: 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", & Raised panel forged alloy steel.
• 15pc MM: 6mm to 24mm #IMP-01-AW14 2". Understanding the Part Numbers
SPECIAL
#IMP-01-W14W (SAE) #IMP-01-WJ6 For Example: 01-IW11316J
#IMP-01-W15MW (MM) $49.99 SPECIAL • IW = Individual Wrench
MSRP $64.99 • 11316 = the size 1-13/16”
SPECIAL YOUR CHOICE $99.99
* metric example IW12M (12MM)
$54.99 6pc JUMBO ANGLE HEAD • J = Jumbo (anything over 1” size).
OPEN END WRENCH SET
14pc WRENCH SETS 7pc JUMBO WRENCH SETS METRIC SIZES (6MM) $1.00
Sizes: 1-3/8" to 2" #IMP-01-IW6M
• Fully polished drop forged alloy steel. • High density, dropped forged alloy steel.
• Includes Canvas pouch. • Comes w/ sturdy metal clip for storage. #IMP-01-AWJ6 UP TO $6.99
SPECIAL
#SUN-9714 (SAE) #SUN-9707 (SAE) #IMP-01-IW25M (25MM)
- Sizes: 3/8” to 1-1/4”. - Sizes: 1-5/16” to 2”. $89.99
SAE SIZES (1/4”) $2.00
SPECIAL $69.99 OR #IMP-01-IW14

#SUN-9715 (Metric) #SUN-9707M (Metric) UP TO
- Sizes: 6mm to 19mm. - Sizes: 33, 34, 36, 38,
41, 46, & 50mm. #IMP-01-IW212J (2-1/2") $64.99
SPECIAL $49.99
SPECIALYOUR CHOICE

$149.99

METRIC WRENCH SETS 14pc ANGLE HEAD WRENCH SETS JUMBO ANGLE HEAD WRENCH SETS
METRIC WRENCH SET
• High density, dropped forged alloy steel. • Fully polished w/ 15° & 60° angled ends. All Wrench Sets packaged in either
• Includes Canvas pouch. • Includes Canvas pouch. • Fully polished w/ 15° & 60° angled ends. a Plastic Case or Nylon Pouch.
• #9605M Sizes: 20mm to 24mm • #9926 Sizes: 20mm to 25mm
• #9606M Sizes: 25,26,27,29,30, & 32mm. #SUN-9914 (SAE) • #9627 Sizes: 26mm & 32mm. STUBBY
- Sizes: 3/8” to 1-1/4”. #IMC-710 (10pc SAE)
#SUN-9605M (5pc) #SUN-9926 (6pc) • Sizes 7/16" to 1"
SPECIAL $84.99 #IMC-8910 (10pc Metric)
SPECIAL $34.99 SPECIAL $54.99 • Sizes 10mm to 19mm
#SUN-9914M (Metric) MSRP $43.71
#SUN-9606M (6pc) - Sizes: 6mm to 19mm #SUN-9927 (7pc) SPECIAL
YOUR CHOICE
SPECIAL $64.99 SPECIAL $64.99 SPECIAL $89.99
$29.99
5pc HALF MOON WRENCH SETS 6pc JUMBO ANGLE HEAD SAE STANDRAD WRENCH SETS
WRENCH SET SUPER THIN WRENCHES
• Fully polished drop forged alloy steel, #IMC-9017 #IMC-8109 (9pc Metric)
• Includes Canvas pouch. • Fully polished w/ 15° & 60° angled ends. • 17pc SAE Sizes: 1/4” to 1-1/4” • Sizes 8mm to 32mm
• Sizes: 1-3/8,1-1/2,1-5/8,1-3/4,1-7/8, & 2”.
#SUN-9935 (SAE) • Includes Canvas pouch. $69.99 $39.99
- Sizes: 5/16" to 7/8"
#SUN-9916 #IMC-9317 #IMC-8308 (8pc SAE)
OR MSRP $204.99 • 17pc Metric Sizes: 8mm to 24mm • Sizes 3/8" to 1-5/16")
SPECIAL
#SUN-9935M (Metric) $54.99 $49.99
- Sizes: 8mm to 22mm $149.99
CROWSFOOT WRENCH SETS
SPECIALYOUR CHOICE

$34.99

V-GROOVE WRENCH SETS 3/8” Dr. Crowfoot Wrench Sets

• Fully polished drop forged alloy steel, 11pc SAE Set 10pc METRIC Set 3/8” Drive SERVICE WRENCHES
• Includes Canvas pouch. #IMC-7412 (12 pc. Metric) #IMC-9215 (15pc SAE)
#SKT42265 #SKT42365 • Sizes 8mm - 19mm • Sizes 3/4" to1-5/8"
#SUN-9915 (SAE) (3/8” to 1”) (10MM -19MM) #IMC-9515 (15pc Metric)
Sizes (14pc): 3/8” to 1-1/4”. SPECIAL #IMC-7711 (11 pc. SAE) • Sizes 20-30mm, & 34-36mm
SPECIAL • Sizes 3/8" - 1"
SPECIAL $84.99 $179.99 MSRP $195.96
$169.99 MSRP $52.13 SPECIAL
SPECIAL YOUR CHOICE YOUR CHOICE
#SUN-9917M (Metric)
Sizes (12pc): 8mm to 19mm $39.99 $144.99

SPECIAL $49.99 METRIC CROWSFOOT 1/2” Drive ANGLEHEAD WRENCHES
WRENCH SETS #IMC-7814 (14pc SAE) #IMC-214 (14 pc. SAE)
SAE CROWSFOOT WRENCH • Sizes 1-1/16” - 2” • Sizes 3/8" to 1-1/4"
SETS • Fully polished drop forged alloy steel MSRP $149.65
• Mounted on a convenient storage rail. SPECIAL $79.99
• Fully polished drop forged alloy steel
• Reusable Blow Mold Storage Tray. #SUN-9730 $99.99 #IMC-9810 (10 pc. SAE)
• #9720 Sizes: 1” to 1-3/8”. 24mm-30mm & 32mm • Sizes 1-5/16" to 2"
• #9722 Sizes: 1-5/8” to 2-1/4”. #IMC-7917 (17pc Metric) * 15° & 60°
SPECIAL $64.99 • Sizes 20-30,32,35,36,38,41,42, & 46mm MSRP $399.71
#SUN-9720 MSRP $173.02 SPECIAL
#SUN-9740 SPECIAL
SPECIAL $69.99 34-36, 38, 41, 42, & 46mm $259.99
$129.99
#SUN-9722 SPECIAL $89.99 #IMC-816 (16 pc. Metric)
• Sizes 8mm to 23mm
SPECIAL $99.99 3/8” Dr. Flare Nut
Crowsfoot Wrench Sets $84.99
8pc MINIATURE
IGNITION WRENCH SETS • Fully polished drop forged alloy steel #IMC-819 (9 pc. Metric)
• Mounted on a convenient storage rail • Sizes 24mm to 32mm
15° x 60° head openings.
#SUN-9708 (SAE) $99.99
#VIM-VM50 - Sizes (8pc): 3/8” to 7/8”.
(4mm to 9mm) INDIVIDUAL SIZES
#VIM-V18 SPECIAL $29.99 ALSO AVAILABLE!
(V1 to V8”)
#SUN-9710M (Metric)
SPECIAL - Sizes (10pc): 10mm to 19mm
YOUR CHOICE
SPECIAL $39.99
$29.99

TM Half-Cut TORX Tamper- 14pc 6" Hex Driver Sets 3pc Impact Socket
Proof Socket Bit Set Adapter Set
Impact Grade • SAE Sizes: (7) hex & (7) ball-hex: 1/8", 5/32",
Extension Reducer • 12 pc. Half-Cut Torx Stubby Tamper Proof 3/16", 7/32", 1/4", 5/16", & 3/8" • Includes: 1/4" Dr., 3/8" Dr, 1/2" Dr. adapters.
Security Drivers, T8 thru T60 • METRIC Sizes: (7) hex & (7) ball-hex: 3mm, • Detent ball for secure socket retention.
• 1/2” (Female) x 3/8” (Male) • 10 pc. 4" Long Half-Cut Torx Tamper Proof 4mm, 5mm, 6mm, 7mm, 8mm, & 10mm #TIT-12082 (2-3/4" OAL)
• Overall Length: 36” security Drivers,T8 thru T50 SPECIAL
#VIM-HXLM100 (Metric)
#IMC-98036 #VIM-HCTSD #VIM-HXL100 (SAE) $4.99
MSRP $86.46 MSRP $82.36
$29.99 SPECIAL SPECIAL #TIT-12086 (6" OAL)
YOUR CHOICE SPECIAL
$79.99
$74.99 $9.99
Triple Square Socket Sets TORX SOCKET SETS
HEX SOCKET SETS #TIT-15206 (12" OAL)
#VIM-XZN100 (8pc) #VIM-HCT1050 (10pc STUBBY) SPECIAL
9pc STUBBY SETS
+ 3/8” Drive Stubby 1/4” Drive Sizes: T10 - T50 1/4” square drive, one-piece design. $24.99
+ 4mm thru 16mm. MSRP $39.02 #VIM-SHM400 (MM)
SPECIAL SPECIAL 3pc Locking Impact
- Sizes: 2mm to 10mm Socket Adapter Sets
$34.99 $34.99 #VIM-SHI400 (SAE)
• Includes: 1/4" Dr., 3/8" Dr, 1/2" Dr. adapters.
#VIM-XZN400 (9pc) #VIM-V458L-SET (18PC LONG) - Sizes: 3/32” to 3/8” • Detent ball for secure socket retention.
MSRP $33.00 • 1/4" Shank
+ 1/4”, 3/8”, & 1/2” Drive 9 pc 4.5” Long T10 thru T50, 9 pc 8” long T10 SPECIAL #TIT-15210 (2-3/4" OAL)
+ 4mm thru 18mm. thru T50, black bits and chrome holders. YOUR CHOICE SPECIAL
SPECIAL
MSRP $103.70 $29.99 $24.99
$59.99 SPECIAL
26pc MASTER SET CHROME SOCKET SETS
$94.99 Sizes: 2mm to 19mm & 3/32 to3/4.
#VIM-HMS26 22pc. 1/4”" DRIVE SOCKET SETS
9pc XZN TRIPLE SQUARE #VIM-TMS34PF (34pc) MSRP $103.05 #IMP-12-SK2214 (3/16"-1/2")
SOCKET SETS • Torx Sockets: T8-T60 & E4 - E20, SPECIAL #IMP-12-SK2214M (4mm-11mm)
• Tamper Resistant Sockets: T10 - T55 YOUR CHOICE
-1/4” dr, 4 & 5mm MSRP $111.52 $94.99
-3/8” dr, 6, 8, & 10mm SPECIAL $24.99
-1/2” dr, 12, 14, 16, &18mm
$99.99
#TIT-16138 (Chrome)
#TIT-16144 (Stubby Impact)
SPECIAL YOUR CHOICE

$39.99

UltraAccess 4pc 1/2” Dr. SQUARE 19pc 1/2” Dr. SQUARE 21 PC. 3/8" DRIVE SOCKET SETS
16pc Socket & Ratchet Set DRAIN PLUG SOCKET SET DRAIN PLUG SOCKET SET #IMP-12-SK2138 (3/8"-7/8")
#IMP-12-SK2138M (9mm-19mm)
Uni-Fit® Universal Drive: #IMC-3304 (4pc 1/2” dr.) - Male Sq: 7/32”, 1/4”, 9/32”, 5/16”, 3/8”, 7/16”, YOUR CHOICE
13 Sockets = over 47 Fasteners! • Male Sq. 8mm,10mm, & 1/2" 1/2”, 9/16”, 5/8”, 8mm,10mm, & 12mm.
This Set works on 6pt, 12pt, E-Torx, Spline, • Female Sq: 10mm - Female Sq: 7/32”, 1/4”, 9/32”, 5/16”, $39.99
Square, & Rounded Fasteners & contains the SPECIAL 11/32”, 3/8”, & 10mm.
following packaged in a durable storage case: 17 PC. 1/2" DRIVE SOCKET SETS
• (13) Uni-Fit Pass-Thru Sockets $14.99 #IMC-3319 #IMP-12-SK1712 (7/16"-1 1/4")
MSRP $83.38 #IMP-12-SK1712M (10mm-27mm)
Sizes: 8-22mm & 5/16”-7/8” SPECIAL YOUR CHOICE
• (1) Pass-Thru Reversible Ratchet
$59.99 $54.99
+ low-profile & offset handle
• (1) 3” Pass-Thru Socket Extension 21pc 1" Dr. SOCKET SET 21pc ¾" Dr. SOCKET SET 13pc Impact Grade Bit Sets
• (1) 3/8” Drive Quick Release Ratchet Adaptor
Sizes: 1-5/8" to 3-1/8" #IMP-12-SK2134-6 (6pt Sizes: 7/8" to 2") • High-Quality Torsion Bits,
#CNL-39100 #IMP-12-SK2134P (12pt Sizes: 7/8" to 2") help to reduce damage to fastener.
MSRP $58.05 #IMP-12-SK211 #IMP-12-SK2134M (Sizes 19 to 50MM) • Each Set comes w/ 1/4” & 3/8” Bit Holders, and
SPECIAL SPECIAL
SPECIAL a convenient Storage Rail
$49.99 $259.99 YOUR CHOICE
#TIT-16037 (SAE)
$99.99 • (8) 1/4” Drive Sizes:
+ 1/16” to 1/4”.
• (3) 3/8” Drive Sizes:
+ 5/16”, 3/8”, & 7/16”

8pc HOLLOW GASKET 148pc MASTER BIT SET Nut Setter Sets #TIT-16038 (METRIC)
PUNCH SET • (8) 1/4” Drive Sizes:
Assortment of the most popular, & hard to find 12PC Nut Setters (OAL = 2.5”) + 1.5-6mm
• Punch round holes in paper, fiber, cloth, bits, plus a 1/4" drive socket adaptor & 3-1/2" • Comes Packaged in a Blow-Molded Case • (3) 3/8” Drive Sizes:
rubber, leather and other gasket materials. + 7, 8, & 10mm
• Includes: seven hole punches (1/4” - 5/8") and Magnetic Quick-release bit holder. #VIM-NS100 (SAE)
the P69 drive mandrel. + Size Range: 1/4” to 9/16” #TIT-16039 (TORX)
• Made from alloy steel & #TIT-16148 #VIM-NSM100 (Metric) • Tamper-Resistant Design
heat-treated. SPECIAL + Size Range: 8-14mm • (8) 1/4” Drive Sizes:
SPECIAL YOUR CHOICE + TT8 to TT40
#VIM-P79 $59.99 • (3) 3/8” Drive Sizes:
MSRP $55.71 $34.99 + TT45, TT50, & TT55
SPECIAL
SPECIAL YOUR CHOICE
$49.99
$14.99

Digital Torque Adapters 1/2” DRIVE TORQUE LIMITING SETS

Converts any ratchet or breaker bar into a torque measuring tool! 10pc Extension Set 8pc Extension/Socket Set TM

• Use to re-calibrate any type of torque wrench. #AST-78810 #AST-78818 TORQUE ANGLE GAUGE
• Units of Measurement: Kg-CM, Kg-M, In-lb, Ft-lb and N-m
MSRP $151.23 MSRP $96.78 • Equipped w/ 1/2” Square Drive (Male & Fe-
• Features: LCD Backlight, Rotates/Swivels 240°, 10 Memory Settings, SPECIAL SPECIAL male) for both socket and ratchet.
& a 180° Flip Screen. • 360° scale marked in 2° increments w/ inter-
$119.99 $74.99 vals of 10° & 30°.
• Includes: Calibrating Block, (1) DC 3V CR2032 battery,
& Packaged in Blow Mold Case SIZES EXTENSIONS #OTC-4554

#TIT-23153 #TIT-23154 65ft/lbs (90Nm) 90ft/lbs (120Nm) $19.99
75ft/lbs (100Nm) 100ft/lbs (135Nm)
+ 3/4” Drive + 1/2” Drive 80ft/lbs (110Nm) 110ft/lbs (150Nm)
90ft/lbs (120Nm) 120ft/lbs (160Nm)
+ Range: 50-600 ft-lbs + Range: 30-150 ft-lbs 100ft/lbs (135Nm)
SPECIAL SPECIAL 110ft/lbs (150Nm) SOCKETS
120ft/lbs (160Nm)
$199.99 $74.99 130ft/lbs (175Nm) 17mm
140ft/lbs (190Nm) 19mm (3/4”)
150ft/lbs (200Nm) 21mm (13/16”)

7/8”

Digital Torque Angle Gauge 4:1 Torque Multiplier BREAKER BAR "CLICK-STOP"
TORQUE WRENCHES
• Easily measure angular rotation for torque & Designed w/ (4) pinion gears in a compact • Drive: 1/2”
angle applications w/ an accuracy of +/- 2%. housing. Frictional losses in the gear train may • Overall Length: 24” #IMP-11-TW38
• Utilizing a V-channel and magnets, it quickly
attaches to the handle of any standard ratchet, cause a torque loss of 10% to 20%. #IMC-41024 (3/8" dr. 120-960 in. lb.)
wrench, or breaker bar. • Input = 3/4"
• Works on 1/4", 3/8", 1/2" & 3/4". • Output = 1" $39.99 $29.99
• Built-in feature allows the user to keep track of • Output Capacity = 2,000 ft.lbs.
angular rotation even when using a ratchet. • Weight & OAL = 14lbs x 25" #IMP-11-TW12

#BRO-BLDAG001 #CEN-6387 (1/2" dr. 10-150 ft. lb.)

MSRP $122.70 MSRP $866.96 $39.99
SPECIAL SPECIAL

$99.99 $599.99

1/2” DRIVE DIGITAL REVERSIBLE TORQUE WRENCH Micrometer-Type Torque Wrenches

• Range: 15-150 ft/lbs, 180-18000 in/lbs & 20.3-203Nm. 3/8” Drive 3/4” Drive
• Double Gear Sensing System (Peak & Track Mode).
• 8-bit electronics ensures accuracy of +/- 3.5%. #CEN-3T317 #CEN-3T660
• Made of Chromium vanadium alloy, engineered plastics, & w/ a soft-touch overmold.
Strength, Protection, & Comfort. (20-200 in-lbs) (100-600 ft-lbs)
• Equip w/ large backlit LED digital display & audible buzzer.
SPECIAL $49.99 SPECIAL $449.99
#BRO-BLD0212BM
1/2” Drive
MSRP $150.00
#CEN-3T415
SPECIAL
(10-150 ft-lbs)
$124.99
SPECIAL $54.99

#CEN-3T425

(25-250 ft-lbs)

SPECIAL $99.99

MICROMETER TORQUE WRENCHES PUSH THROUGH RATCHET SK HAND TOOL
TORQUE WRENCH LINE
w/ Blow Molded Cases TORQUE WRENCHES
w/ Blow Molded Cases Limited 1year R&R warranty, & Custom Cases.
• Sealed Tear Drop Head w/ 32-Tooth Ratchet Mechanism.
• Knurled Anodized Aluminum Handle w/ Mid-Point Clearly #CEN-97361B #CEN-97353A Micrometer Clicker Style Adjustable w/ Dual Scale

Marked. (1/4” Dr. 20-200 in. lbs.) (1/2” Dr. 25-250 ft. lbs.) #SKT-75002 (1/4” Dr. 20-100 in. lbs.)
• Stamped Scale on Beam: Primary ft/lbs & Secondary Nm. MSRP $202.52 MSRP $205.18
SPECIAL SPECIAL $259.99
• Accurate in Clockwise Direction +/- 3% from 20% to 100% of
full. $149.99 $169.99 #SKT-75025 (3/8” Dr. 50-250 in. lbs.)

#KDT-85060 #KDT-85063 $169.99

(1/4” Dr. 30-200 in. lbs.) (1/2” Dr. 20-150 ft. lbs.) #CEN-97351A #CEN-97355A #SKT-75100 (3/8” Dr. 10-100 ft. lbs.)
MSRP $186.70 MSRP $186.24
SPECIAL SPECIAL (3/8” Dr. 25-250 ft. lbs.) (1/2” Dr. 100-600 ft. lbs.) $174.99
MSRP $174.68 MSRP $796.81
$144.99 $144.99 SPECIAL SPECIAL #SKT-75150 (1/2” Dr. 20-150 ft. lbs.)

#KDT-85061 #KDT-85066 $144.99 $634.99 $184.99

(3/8” Dr. 30-250 in. lbs.) (1/2” Dr. 30-250 ft. lbs.) #CEN-97352A #SKT-75250 (1/2” Dr. 25-250 ft. lbs.)
MSRP $180.15 MSRP $227.35
SPECIAL SPECIAL (3/8” Dr. 10-100 ft. lbs.) $199.99
MSRP $178.99
$139.99 $179.99 SPECIAL #SKT-75600 (3/4” Dr. 100-600 ft. lbs.)

#KDT-85062 #KDT-85065 $144.99 $879.99

(3/8” Dr. 10-100 ft. lbs.) (3/4” Dr. 100-600 ft. lbs.) Beam Style
MSRP $202.90 MSRP $932.36
SPECIAL SPECIAL #SKT-76120

$159.99 $634.99 (3/8” Dr. 75 ft. lbs.)

$74.99

#SKT-76130

(1/2” Dr. 150 ft. lbs.)

$74.99

TM DIAL INDICATORS SETS PROFESSIONAL 0-6” DIAL CALIPERS

ELECTRONIC DIGITAL DRUM GAUGE All Sets Feature: Range 0-1" & Graduations .001" Features (4) Measurements: Inside, Outside, Depth, &
Step.
 Range: 6” - 20” (150-500mm) w/ .001” (.01mm) graduations. #CEN-3D101
 Easy to Read, w/ Pointed anvils and 4-1/4” long arms. DIAL
• Compact magnetic base
#CEN-3B530 MSRP $73.27 • .100” per Revolution w/ .001" Graduations.
SPECIAL
MSRP $307.91 #CEN-3C101
SPECIAL $64.99
MSRP $54.84
$229.99 #CEN-3D102 SPECIAL

DIGITAL WHEELS-ON ROTOR • On/Off magnetic base $49.99
GAUGE with flex arm.
MSRP $125.67 DIGITAL - Inch & Metric
 Measures the rotor without removing the wheel to SPECIAL
pre-qualify brake jobs, by providing easy access between • Graduations of .0005” & .01mm
dust shield and rotor. $109.99
 Digital read-out with push button inch/metric conversions. #CEN-3C301
 Range: 0-3.5”/0-88mm #CEN-3D103
 Graduations: .001”/.01mm MSRP $34.50
• Locking pliers clamp to any convenient object SPECIAL
#CEN-3M335 MSRP $99.56
SPECIAL $29.99
MSRP $115.34
SPECIAL $84.99 DIGITAL - Inch, Metric, & Fractional

$99.99 #CEN-3D104 • Large LCD digital display.
• Graduations of .0005”, .01mm, & 64th.
DIGITAL ROTOR GAUGE • On/Off magnetic base.
MSRP $101.67 #CEN-3C350
• Range 0-4.00"/0-100mm SPECIAL
• Graduations .001"/.01mm MSRP $39.68
• Easy to read digital display w/ inch/metric conversion $89.99 SPECIAL
• Measure brake rotors and ball joints
• Pointed anvil with 3.50" long arms DIGITAL Display $34.99
#CEN-3D105
#CEN-3M430A #CEN-3C351 (Carbon Fiber)
• .001" / .01mm graduations
MSRP $72.14 • On/Off magnetic base. MSRP $19.13
SPECIAL MSRP $170.69 SPECIAL
SPECIAL
$64.99 $14.99
$149.99

ANGLE FINDER 6pc TELESCOPING BRAKE LINING GAGE SELF-CENTERING
GAUGE SET CYLINDER BORE GAGE
Used to measure truck and automotive Graduations 0-½” w/ 1/64” increments.
front ends and drive shaft angle. • Both contacts release or lock by turning knob • 2-6” Range
at end of handle. Handles up to 5-1/2”. #CEN-3S125 • .0005" graduations
#CEN-6494A • Self Centering gages checks slots, grooves,
recesses, and cylinders. MSRP $22.04 #CEN-3D301
MSRP $16.94 • Measurement is read w/ a micrometer. SPECIAL
• Range 5/16” to 6” MSRP $142.02
SPECIAL $14.99 SPECIAL
#CEN-3S116
$14.99 $124.99
MSRP $40.40
SPECIAL

$34.99

TUBULAR STYLE DEPTH MICROMETER ROTOR MICROMETER
INSIDE MICROMETER
• Range 0-6” w/ .001 Graduations. • Range .300-1.300”
• Range of 2” to 12” w/ .001 Graduations. • For precision depth measurements. • Graduations .0001”
• Check connecting rods, camshaft bores, • Measure: hole depth, recesses, & keyways. • 3½ deep frame
and main bearing bores.
• Comes in a Wooden Case. #CEN-3M646 #CEN-3M130

#CEN-3M512 MSRP $235.71 MSRP $81.23
SPECIAL SPECIAL
MSRP $216.58
SPECIAL $159.99 $59.99

$164.99

MECHANICAL MICROMETERS DIGITAL DISC BRAKE
MICROMETER
• 3M201; dial read-out. Range 0-1” & Graduations .0001”
• 3M301; electronic digital read-out . • .300“-1.300” Range
• .0001“ Graduations
+ Push-Button inch/metric conversion. • Digital read out to .001”
+ Range 0-1”/0-25mm & Graduations .0001”/.001mm. • 3½ deep frame

#CEN-3M201 (Dial) #CEN-3M230

MSRP $76.37 MSRP $96.29
SPECIAL
SPECIAL $59.99
$69.99
#CEN-3M301

MSRP $169.06

SPECIAL $129.99

HEAVY-DUTY CIRCUIT TESTERS 5-28v Circuit Tester Cordless Circuit Tester TM
w/ 12ft Retractable Wire & Clip w/ LCD Screen
V-tip needle, doesn't require ground wire or clip. IN-LINE SPARK CHECKER
 Works on 6 & 12 volt systems.  Tall, easy to read LCD display. Safe w/ ECMs, sensors, transducers, airbags, KIT FOR RECESSED PLUGS
 Standard 3-1/4” Length Probe  Computer safe - draws less than 10 milliamps at 12 volts etc.
(Not for use in testing airbags). Troubleshoots virtually all domestic and import
#TOO-27300 #AST-7760 cars, SUV's & trucks.
#TOO-28300
SPECIAL MSRP $16.73 #TOO-23970
MSRP $49.95 SPECIAL
$10.99 SPECIAL SPECIAL
$14.99
“CHECK POINT" $39.99 $19.99
CIRCUIT TESTERS
Wirehawk® CIRCUIT TESTER Computer Safe Circuit Tester Kit w/ 8 NOID LIGHTS,
6 & 12 volt systems. & 2pc IAC TEST LIGHTS
 Captures and pierces wire with unique hook tip Safe for automotive computers.
#TOO-21000 design & can be used as an “ice-pick” tester. Use to test spark plug circuits, electronic fuel
 Ground Wire: 44”, 16 gauge, w/ 50 amp clamp. #LIS-24550 injection signals & idle air control circuits.
$5.99  Use for 12V or 24V circuits, connections, fuses
and 2-cycle engine timing. SPECIAL #TOO-36350
#TOO-27000
#THX-121 $14.99 MSRP $75.65
(Heavy Duty) SPECIAL
$24.99
$7.99 $69.99

12 / 24 / 42v Circuit Tester IN-LINE SPARK TESTER IN-LINE IGNITION DELUXE NOID LITE &
SPARK CHECKERS GM AC SIGNAL TEST LIGHTS
 Computer Safe – draws 3 milliamps at 12V Gives a visual check
 Has 2-LED’s for easy voltage identification: of the ignition system. #TOO-23900  Checks for systems of GM TBI, Bosch PFI
+ BLUE for 12 & 24v / RED for 42v Ford TBI, GM PFI, Geo TBI and GM SCPI
 Heavy duty ground clip w/ insulator. #LIS-20610 #TOO-23920  Normal voltage indicated by flashing light,
is visible from passenger compartment
#TOO-28200 SPECIAL (w/ 90° Boot)
SPECIAL #AST-7898
MSRP $24.95 $14.99 YOUR CHOICE
SPECIAL MSRP $32.73
$9.99 SPECIAL
$19.99
$24.99

10pc 1/8” Stubby Body Panel HOSE REMOVAL TOOL WIRE STRIPPERS WIRE STRIPPER FOR
Double-End Drill Bits #TOO-18950 (Self Adjusts) RECESSED AREAS
 Great for the removal of rubber
 135° point allows for fast drilling. hoses from inlets, outlets & clamps.  10-26 gauge wire.  Strips 22-12 gauge single or
 Made of High Speed Steel.  Specially designed end makes multiple stranded conductor wire
 Packaged in Plastic hose removal easy. $19.99  Automatically adjusts to wire size
Hang-up Vial.  8½” overall length with 4”  Built in wire cutter
exposed shaft. #TOO-19000
#TOO-15210 #TOO-19100
#TOO-13860  12-22 gauge wire.
SPECIAL MSRP $24.95
$5.99 $24.99 SPECIAL
$4.99
$19.99

5pc Cut-Off Wheel Display Card PNEUMATIC TOOL MacPherson COIL SPRING
OIL SUPPLIER Strut Alignment Level COMPRESSORS
 3” diameter, 1/16” thick, & 3/8” center hole.
 Rated 25,000 rpm maximum speed.  Gives positive protection to pneumatic tools &  Use to restore a vehicle's camber setting after #CAL-512 (Macpherson Struts)
puts an end to air line contamination. strut repair or installation, which allows vehicle
#TOO-94860  Lubricates all internal moving parts. to be safely driven before a more precise wheel Quickly compress the coil spring to replace
alignment can be performed. shock absorber, spring sets, repair bent strut or
$9.99 #TOO-98500 strut tube & repair damaged spindle. Instructions
#TOO-61800 & safety hooks included!
Arbor for Cut-Off Wheels MSRP $22.55 MSRP $71.70
SPECIAL MSRP $36.95 SPECIAL
 Turn a Die Grinder or Drill into a Cut-Off Tool, SPECIAL
using 1/4” or 3/8” Cut-Off Wheels. $19.99 $39.99
$29.99
#TOO-94950

$5.99

AIR HAMMER ACCESSORIES 3PC STEP DRILL BIT SET MacPHERSON STRUT #CAL-510
SPRING COMPRESSOR
Quick Change Spring #1 - 13 Hole Sizes (1/8” to 1/2”) Removes and installs coil springs quickly &
 Retains Chisels w/ .401” Parker Shanks. #2 - 6 Hole Sizes (3/16” to 1/2”)  Now w/ acme threads & economically priced. safely. Compress coil springs on all passenger
#3 - 9 Hole Sizes (1/4” to 3/4”)  Use w/ impact wrench cars and pick-up trucks. Instructions Included!
#TOO-94000 or hand tool ON or MSRP $91.15
#TIT-16503 OFF the vehicle. SPECIAL
$4.99
MSRP $29.86 #TOO-63000 $44.99
Retain-It 2pc Safety Device SPECIAL
 Collar fits against stop on .401” Parker shank MSRP $49.95
chisels for 100% contact. $24.99 SPECIAL

#TOO-94100 $44.99

$14.99

Right-Angle Drill Attachment 8PC. CARBIDE BURR SET DOUBLE-CUT CARBIDE BURR SETS
w/ WOODEN BOX
 90° 1/4" Bit Driver w/ 360° Swivel Handle. Each Set has 1/4” Shanks & are packaged in a Blow Molded Case, for easy storage and transport.
 1/4" Chuck Bit Holder & 1/4" Hex Shank. *Individual Sizes Available*
 Smooth precision turning during 90° position. 8pc Standard 5pc Extra Long Shank
#SGS-BK8
#TIT-16235  Includes: (4) cylindrical, (2) tree, & (2)  4.5" OAL
MSRP $187.30 ball  Includes: (2) cylindrical,
SPECIAL SPECIAL (2) tree, & (1) ball.

$24.99 $149.99 #AST-2181 #AST-2185

MSRP $98.25 MSRP $98.25
SPECIAL SPECIAL

$79.99 $74.99

DRILL DOCTOR: THE WOLRDS BEST DRILL BIT SHARPENERS!

TM • The Drill Doctor Series sharpens w/ Precision, Accuracy, & Durability the largest range & most popular sizes of dull or broken bits.

5pc Screw Extractor Sets #DAR-DD350X • Works on high-speed steel, carbide, cobalt, tin-coated, & masonry drill bits.
+ Range = 3/32” to 1/2” Bits
 #1-5 spiral & straight flute screw extractors. + Works on 118° point Each Model Comes w/ a FREE 180-Grit Diamond Sharpening Wheel!
 Use for removing broken screws, pipes, bolts,
& studs. MSRP $86.00 #DAR-DD500X #DAR-DD750X
SPECIAL + Range = 3/32” to 3/4” Bits
SPIRAL + Range = 3/32” to 1/2” Bits
$69.99 + Works on ANY Angle
#CTR-73415 + Works on 118° & 135° point
from 115° & 140° point.
SPECIAL
MSRP $160.00 MSRP $200.00
$19.99
SPECIAL SPECIAL

$139.99 $164.99

STRAIGHT GRIPS When Others 4pc 3/8”dr Stud Pullers REMOVE BROKEN PARTS

#CTR-73215 CAN’T!  Remove broken or worn studs and/or installing w/out BREAKS OR JAMS
new studs w/out damage to the threads.
SPECIAL  Loosen or Tighten Pipe Fittings in Tight Spots.  Standard Sizes: 5/8", 9/16", & 13/16". Fast, easy removal of broken studs, bolts &
 Metric Sizes: 6, 8, 10, & 12mm screws.
$19.99  Eliminate the damage to threads, walls, and
highly polished nickel or chrome finishes. #ALL-647081 (SAE) #WED-10010

 Sizes 3/8",1/2",3/4", & 1". (10 sizes 1/8” to 13/32”)

10pc Reverse Drill #WED-200AK #ALL-647082 (MM) $29.99

& Screw Extractor Set SPECIAL MSRP $43.59 #WED-10225
SPECIAL
 (5) Reverse Drill Bits, $49.99 (25 sizes 1/8” to 7/8”)
+ 5/64, 7/64, 5/32, 1/4, & 19/64. $34.99
WEDGE-PRUF $74.99 WEDGE-PRUF
 (5) Screw Extractors,
10pc SPIRAL FLUTE Damaged Screw Remover Set 115pc MASTER HSS DRILL
+ #1 - 5.

#TIT-16013 EXTRACTOR & BIT SET  For Phillips, Slotted, TORX¨ & Robertson. BIT SET
 1/4" hex shank fits drills, sockets, & drivers.
MSRP $24.99  5 LEFT-HAND Cobalt Drill Bits, 5/64” to 19/64” Drill Bits A-Z, #1 to #60, & 1/16"-1/2" by 64ths
SPECIAL  5 Fluted Screw Extractors,  Sizes #1, #2, & #3 screw removers packaged in
sizes EX-1 thru EX-5 a handy storage case. #IMP-21-DS115
$19.99 * Available in 8 pack
$84.99
35pc SCREW EXTRACTOR #HAN-11119 counter display
SPECIAL
& DRILL BIT SET #TIT-11214
$49.99
 Spiral & multi-spline extractors (inc. metric). SPECIAL

$9.99

 Left hand cobalt bits loosen the bolt while it

drills.

#HAN-11135 25pc SCREW EXTRACTOR Sav-A-Thread… 29pc HSS DRILL BIT SETS
& DRILL BIT SET
MSRP $253.57 The only thread repair product that can be used Include sizes 1/16” to 1/2” by 64th.
SPECIAL  Extracts screws / bolts, & removes broken to repair both taper seat and gasket type spark
fastener w/out breaking or jamming. plug assemblies. #IMP-21-DS29
$214.99  Use on thread sizes 5mm to 16mm. $29.99
#HEC-5334-14 #IMP-21-DS29R
FORD TRITON SPARK #AST-9447
PLUG REPAIR KITS (M14 x 1.25) (3/8" Reduced Shank)
MSRP $88.03 MSRP $42.20
Insert Installer SPECIAL SPECIAL $29.99
Repairs Ford Modular Cylinders Heads. #IMP-21-DS29T
Works w/ Ford Triton Motors (’96 to ‘03). $39.99 $34.99
(Titanium)
#CAL-38900 3/8”dr 13pc Bolt 5pc Left Hand Drill Bit Set
$34.99
MSRP $567.97 Extractor Set  Industrial, polished finish,
SPECIAL 40pc TAP & DIE SETS
Metric & SAE Sizes: 1/4", 5/16"-8mm, 3/8", 135° split point.
$349.99 10mm, 7/16"-11mm, 12mm, 1/2", 13mm, 9/16"-  “Stubby” mechanics length #CTR-98900 (SAE)
14mm, 5/8"-16mm, 17mm, 11/16" & 3/4"-19mm.
Spark Plug Extractor for added strength.  Sizes 4-40 to 1/2"
Extracts frozen & broken off spark plug sleeves  Premium, cobalt steel. MSRP $175.56
in Ford Triton Engines (‘04 to ‘08). SPECIAL
#HAN-54113 #CTR-74105
#CAL-39100 $179.99
MSRP $153.67 MSRP $62.81
MSRP $86.93 SPECIAL SPECIAL #CTR-98912 (MM)
SPECIAL
$144.99 $39.99  Sizes 3mm to 12mm
$59.99 MSRP $189.76
Rotary Spot Weld Cutter 41pc TUNGSTEN STEEL SPECIAL
Porcelain Extractor TAP & HEX DIE SETS
Extract the broken porcelain from the sleeve w/  Remove spot welds from sheet metal w/ $199.99
out risk of material falling into the engine. Works Double sided 3/8” & 1/4” blade w/ retractable #IMP-22-TD41H
on spark plugs in point. 58pc TAP & DIE SETS
Ford Triton Engines (’03 to ‘08).  Arbor fits all 1/4” Drills (SAE: 4-40 to 1/2")
* Replacement 3pc Double Sided #CTR-98958 (SAE)
#CAL-39200 Cutting Blades #TOO18025.. OR
 23 taps & 23 dies.
MSRP $26.87 #TOO-18000 #IMP-22-TD41HM1  Sizes 6-32 to 3/4".
SPECIAL MSRP $360.70
$12.99 (Metric: 3mm to 12mm) SPECIAL
$19.99
Spark Plug Rethreading SPECIALYOUR CHOICE $44.99 $374.99
3-Valve Insert Repair Kit Kit for FORD
Repair damaged threads or blowouts in 45pc TUNGSTEN LARGE #CTR-98957 (MM)
30min or less per cylinder. Use w/ 5.4L & 6.8L Includes: drill, tap, swedge tool, SIZES TAP & DIE SETS
engines built before 10/9/07, and for insert tool, 10 steel inserts, &  23 taps & 23 dies.
4.6L engines built before 11/30/07. vacuum adapter to remove shavings from the #IMP-22-TD45TP-1  Sizes 3mm to 18mm
chamber. - SIZES1/4" to 1" MSRP $398.13
#CAL-39300
#LIS-65900 $134.99 SPECIAL $424.99
MSRP $368.81
SPECIAL MSRP $654.50 #IMP-22-TD45MP-1
SPECIAL - SIZES 6 to 24mm
$219.99
$459.99 $119.99

1-TON EZ PULLER TM

Makes Tough Projects an Easy One-Person Job! PROFESSIONAL SHOP VISES
Features: the ability to release 1 notch at a time,
galvanized air craft cable, drop forged steel safety hooks, With high quality construction for extra durability and full-strength performance at any jaw
and contour grip. opening, these vises are made for the professional, strong, durable, and built to last..
 One Piece Construction
 8 Foot Length of Pull #KEN-64055
 Meets ASME & ANSI Standards
 Meets OSHA Specifications (5.5" jaw width, weighs 30 lbs.)
MSRP $206.37
#APP-EZ2000
SPECIAL $149.99
SPECIAL $39.99
#KEN-64065
2-TON POWER PULL
(6.5" jaw width, weighs 41 lbs.)
 Features - 36:1 Leverage, 2 Ton Capacity, 6ft Pull, & Galvanized Aircraft 3/16” Cable. MSRP $268.06

 Cast Aluminum Ratchet Wheel, Contoured Grip & Drop Forged Steel Safety Hooks. SPECIAL $199.99

 Cable Limiter, keeps Two Wraps of Cable on the Ratchet Wheel. REVERSIBLE MECHANIC’S VISES

 Releases Load One Notch-at-a-Time. Lifetime Warranty Increase your gripping capacity when you reverse the position of the front jaw.
 One-Piece Pulley Wheel, for Longer Cable Life. Made in the USA
#KEN-64650
 Zinc Plated for Rust Resistance.
(6.5" jaw width, 10" reverse position weighs 50 lbs.)
 Meets OSHA & ASME Specs. Weight: 8.1 lbs. MSRP $385.16

#APP-72A SPECIAL $239.99

SPECIAL #KEN-64800

$64.99 (8" jaw width, 11" reverse position weighs 74 lbs.)
MSRP $490.96
CABLE PULLERS
SPECIAL $324.99
 Features - 36:1 Leverage, and 6ft. Pull. Cable Limiter, Keeps Two
5" BENCH VISE w/ SWIVEL JAWS & BASE
 Wraps of Cable on the Ratchet Wheel. Releases Load One
 Notch-at-a-Time. Meets OSHA & ASME Specs. Jaws rotate 360° for clamping at any angle!

#APP-18600 (2-Ton w/ 3/16” Cable) 5-Year #TIT-22012
Warranty
SPECIAL MSRP $226.98
SPECIAL
$34.99
$149.99
#APP-18650 (4-Ton w/ 5/16” Cable)

SPECIAL

$59.99 #18600

1-1/2 TON 600 SERIES CHAIN PULLER

 Benefits: Thick Steel Construction, Heat-Treated,

& Drop Forged Safety Hooks.
 5’ Standard Lift w/ the Minimum Handle Length of 16-3/8”.

 Chain Distance between Hooks = 15-3/16” (5/16” dia.)
 Weight: 26.5 lbs

#APP-615 5-Year
Warranty
MSRP $230.92
SPECIAL

$189.99

CHAIN HOISTS COME-A-LONGS 1-TON 400 SERIES CHAIN BLOCK

1/2 TON #IMP-16-LB112  Benefits: Thick Steel Construction, Heat-Treated,
Triple-Geared, & Drop Forged Safety Hooks.
#IMP-16-CH05 (1-1/2” Ton CHAIN)  10’ Standard Lift w/ Minimum Pulling Efforts @ 69 lbs.
 Chain Distance = 12-11/16” (1/4”dia.)
$99.99 $164.99  Weight: 28.7 lbs

2-TON #IMP-16-PP4 #APP-410 5-Year
Warranty
#IMP-16-CH2 (4 Ton CABLE) MSRP $166.12
SPECIAL
$159.99 $34.99
$139.99

Brake Lathe Stone Sets Silencer Bands Silencer Bands Silencer Bands for Drums
for Ventilated Rotors for Non-Vented Rotors
280 GRIT  Extra-Long Premium Grade Rubber.
 Made of Natural Rubber w/ lead weights. #AMM-6921 AUTOMOTIVE
#AMM-3810
STANDARD + 2-PK 6.5” diameter #AMM-5280
1000 GRIT
#AMM-6920 #AMM-6922 + Width 1-3/4”
#AMM-3840
SPECIAL $24.99 + 2-PK 9.25” diameter SPECIAL $34.99
SPECIAL
YOUR CHOICE HEAVY-DUTY SPECIAL TRUCK
YOUR CHOICE
$39.99 #AMM-6930 #AMM-5290
$9.99
Replacement SPECIAL $59.99 + Width 2-3/4”
Pressure Pads Positive Rake
.032” Radius Negative Carbide Insert 6pc Sets SPECIAL $49.99
 Made from non-asbestos material for safety Rake Carbide Insert Sets
 Comes in a Set of Two Radius .017” Carbide Insert 10pc Sets
#AMM-6914-2 (2pk)
#AMM-9183 #AMM-6918-6 FMC/ John Bean
SPECIAL $9.99
SPECIAL SPECIAL $39.99 #AMM-40410
#AMM-6914-6 (6pk)
$14.99 Radius .032” SPECIAL
SPECIAL $19.99
#AMM-7681-6 $44.99
#AMM-6914-10 (10pk)
SPECIAL $49.99 ACCURURN
SPECIAL $24.99
#AMM-40435

SPECIAL

$54.99

TM 20ton Long Chassis 5ton Long Chassis Long Chassis
Service Jack Service Jack Service Jacks
Long Chassis Service
Jacks  Both Air and Manual pump options.  Foot Pedal speeds lifting operation, 3-position  Foot Pedal speeds lifting operation (7” to 27”).
 Lift Range: 7-1/2” to 24-1/2” locking 45-1/2” handle, & built in safety over-  Spring loaded 40” handle & built in safety
 All of the following jacks feature: safety by-  Weight: 589 lbs load. overload.
pass & over-load systems, heavy-gauge steel  Lift Range: 5-7/8” to 22”
frame, convenient foot pedal, & a 40-5/8” long #SUN-6620  Weight: 210 lbs #OTC-1505B
handle.
MSRP $3159.99 #AST-500EX (5 ton, weighs 232 lbs.)
AIR ACTUATED SPECIAL
 High-speed Air Turbo Motor. MSRP $1013.10 MSRP $1099.95
 Lift Range: 7” to 27” $2389.99 SPECIAL
SPECIAL $939.99
#BHK-BH6051 $679.99
#OTC-1510B
(5 ton) HEAVY DUTY SERVICE JACKS
(10 ton, weighs 412 lbs.)
$959.99 Both jacks feature a one piece 50in. handle, U-joint release mechanism,
MSRP $1269.95
#BHK-BH6011 full swivel rear casters, sealed hydraulic pump,
pressure relief valve, and cast iron lift arm. SPECIAL $1079.99
(10 ton)
#HEI-HW93642 (2-Ton) #HEI-HW93652 (3-Ton)
$1489.99
 Lift Range: 4-1/2” to 20-1/4”  Lift Range: 5” to 23-1/2”.
 Length: 28-1/2”  Length: 50”
 Unit Weight: 90lbs.  Unit Weight: 107lbs.

FAST LIFT MSRP $682.22 MSRP $945.55
 Safety by-pass & over-load systems, SPECIAL SPECIAL
heavy-gauge steel frame, & foot pedal.
$439.99 $599.99
#BHK-BH6057
Two Speed 3½ton Service Jack Stinger Series Floor Jacks
(5 ton / 6½” - 22¼”)
 Extra Wide Lift Range – from 4" to 21". #OTC-5302
$699.99
 A long 48" spring-loaded handle. (2¼ ton, lifts 5” to 18”)
 Rolled edges add strength MSRP $199.95
SPECIAL
& resist twisting.
$169.99
3pc Service Jack/Stand Kit #OTC-1526
#OTC-5303
 3.5-Ton Service Jack MSRP $299.95
SPECIAL (3 ton, lifts 5-3/4” to 18-1/2”)
w/ Quick Lift Technology MSRP $219.95
 Pair of 6-Ton Jack Stands $254.99 SPECIAL

#SUN-66037JPK 3ton HYDRAULIC SERVICE JACKS $189.99

MSRP $436.99 STANDARD FAST LIFT SERVICE JACK COMBO
SPECIAL Lift Range: 5-1/4” to 19”
Set Includes
$299.99 #BHK-BH6034  3ton Floor Jack (lift range: 5¼” to 20⅞”)
 Pair of 3ton Jack Stands (lift range: 11½” to 17”).
MSRP $257.82
#BHK-BH6033
SPECIAL $199.99
MSRP $346.27
MAGIC LIFT SPECIAL
Lift Range: 5-3/4” to 20”
$229.99
#OME-25030

MSRP $268.71

SPECIAL $199.99

Xtra Low Profile Floor Jack 2ton Low Rider Service Jack 2ton LOW PROFILE
FAST LIFT SERVICE JACK
LOWEST FLOOR JACK ON THE MARKET!  Ideal for sports cars, exotic cars, & flat tires.
 Locking Safety Bar Holds Load  Max height is high enough for pick-ups & SUV's. Extra long low side frames designed for long reach under the car chassis.
w/out the Need for Jack Stands.  Rapid-Rise Technology w/ Dual-Pistons = Max Height in 6 Pumps.
 Lift Range: 2-3/4” to 15-1/2”  Lift Range: 2.75" to 24" #BHK-BH6023
 4,000lb Capacity.
 Weighs: 64 lbs. #SUN-6602LP (Lift Range: 2½” - 20”)

#ALL-620479 MSRP $408.99 MSRP $515.00
SPECIAL SPECIAL
MSRP $192.00
SPECIAL $259.99 $379.99

$159.99

3½ton SPEEDY LIFT 3ton Aluminum Floor Jack 3ton Aluminum Jack w/
GARAGE FLOOR JACK 3ton Pair of Aluminum Jack Stands
 Rapid-Rise Technology w/ Dual-Pistons = Max Height in 6 Pumps.
 1-2 pumps will to chassis.  Full Aluminum Body Construction, only 58 lbs! • Rapid-Rise Technology w/ Dual-Pistons = Max Height in 6 Pumps.
 Rubber Saddle Pad, protects the vehicle.  Lift Range: 3.8” to 19.3” • Full Aluminum Body Construction, only 58 lbs!
 Magnetic Tool & Parts Tray • Lift Range: 3.8” to 19.3”
 Lift Range: 5½” - 22” #SUN-6603ASJ
#SUN-6603ASJPK
#PRO-G737 MSRP $599.99
SPECIAL MSRP $767.98
MSRP $253.90 SPECIAL
SPECIAL $339.99
$424.99
$189.99

Hydraulic Transmission Jacks Floor Style Transmission Jacks TM

Rugged stable units. OTC1521A is ideal for all passenger car The adjustable head can be tilted forward, backward, and 1/2 Ton Telescopic Trans Jacks
and light truck work. OTC1522A is ideal for heavy duty truck side-to-side. Hydraulic system is protected from internal damage
transmissions. by a patented by-pass mechanism. Load restraining chain is vital Feature: overload valve, foot activated pump/release pedal,
for raising and lowering safety. universal saddle w/ tie downs, and wide base legs w/ (4) swivel
#OTC-1521A (1/2 ton) casters.
#BHK-BH7011
MSRP $579.95 #SUN-7793B
SPECIAL (1/2 ton / 8½” - 24¾”)
 Lift Range: 35.5” to 75.5”
$499.99 $359.99  Shipping Weight: 167 lbs
MSRP $999.99
#OTC-1522A (1 ton) #BHK-BH7210
SPECIAL $679.99
MSRP $1699.95 (1 ton / 7⅞” - 33½”)
SPECIAL AIR / HYDRAULIC
$659.99  Lift Range: 35.5” to 73.5”
$1439.99  Shipping Weight: 145 lbs
1Ton Low-Lift Transmission Jack
1½ TON TRANSMISSION JACK #SUN-7796
 Mounting adapter fits popular Eaton® Fuller® RoadRanger®
 Fully adjustable universal saddle w/ corner brackets & safety transmissions used on nearly all Class 7 & 8 heavy-duty trucks. MSRP $1699.99
chain, plus flash chromed ram, & safety overload system • Swiveling pump handle permits ease of operation in restricted
 Pump handle rotates 360° for all position operation. working spaces. Fast-acting pump quickly raises lifting arm. SPECIAL $1139.99
 Low frame easily clears undercarriage obstacles,  Lift Capacity: 2,200 lbs.
w/ (4) swivel casters for easy positioning.  Lift Range: 8-1/4” to 36-1/2”. TELESCOPIC TRANSMISSION JACK
 Lift Range: 9" - 37"  OAL x OAW: 52” x 32-1/2”.
 Net Weight: 320lbs.  Weight: 330 lbs  Extra wide base lowers center of gravity and promotes stability,
plus rugged steel wheels and swivel ball bearing casters.
#AST-1500EX #OTC-5019A
#BHK-BH7000
MSRP $1676.75 MSRP $2829.95
SPECIAL SPECIAL (700lb / 57” - 76”)
MSRP $627.16
$1124.99 $2399.99 SPECIAL

½ TON TELESCOPIC 350lb LAWN MOWER LIFT $419.99
TRANSMISSION JACK
 Rubber coated saddle to prevent movement.
 Fully adjustable universal saddle w/  Hydraulically powered foot pedal operation.
corner brackets & safety chain, plus flash  Positive dual locking safety latch.
chromed ram, & safety overload system  (4) steel wheels for sturdy mobility.
 Foot operated pump and lowering pedals  Wheel Span: 14” to 48”
allow use of both hands to position and  Lift Height: ground to 20”
align saddle w/ transmission  Item Weight: 77 lbs

#AST-500H #PRO-T5350

MSRP $971.50 MSRP $228.18
SPECIAL SPECIAL

$649.99 $199.99

Single Stage Axle Jack 22ton HD Truck Jack 22ton Self Ratcheting
w/ FREE 1” Dr. Extended Anvil Impact Wrench Under Axle Jack
 Heat treated extension screw allows low
pick-up height adjustment & max lift height.  Full air actuation raises and lowers ram with turn of knob.  Long 49-1/2" T-handle, easily position
 Springless design eliminates weathering, rusting, and damage of springs. jack under vehicles w/ long overhangs.
 Sturdy one-piece handle assembly  Jumbo 9" tires traverse over most terrains.  (3) Saddles: 3/4”, 1-15/16”, & 3-7/8”.
& Chrome plated rams.  Comes w/ (3) Adapters: 0.8", 2.4", & 3.9"s  MAX Lift Ranges: 17-3/4” to 20-7/8”
 Lift Range: 8.9" to 21.7"  PSI Range: 90–145.
#BHK-BH6221  Shipping Weight: 73 lbs  Shipping Weight: 110 lbs
FREE #SUN-SX556-6 = $420 VALUE!
(22 ton / 9⅞” - 22”) • Max Torque: 1,600 ft-lbs #OTC-1788B
MSRP $957.04
SPECIAL #SUN-6722 MSRP $799.95
SPECIAL
$639.99 MSRP $2,021.98
SPECIAL $679.99

$859.99

½ Ton Hydraulic 20 TON SHOP PRESS 25ton Shop Press 44ton Under Axle Jack w/
Telescopic w/ Hand Pump Air Return
 Durable Return Springs for fast ram retraction.
Transmission Jack  Reinforced Head Plate  Heavy steel welded construction w/  Air actuation raises and lowers ram with turn of
 Safety Bypass valve assures unit Multi-position bed (height adjustment). a knob
 Two-stage hydraulic cylinder design foot pump will not exceed rated capacity.  Working Space: 2-1/2” to 34-1/4”  Long 54” handle
and pedal release mechanism.  Overall Height = 59-1/14”  Ram Stroke of 6”.  Lift Range: 8-1/4” to 21”
 Universal mounting head provides wide tilt  Base Width = 29-1/2”  Bed Position: 8  Shipping Weight: 95lbs
range  Stroke = 5-5/7” Weight: 270-lbs
 Height Range: 36” to 73-1/2” #SUN-6744
#AST-TS22 #BHK-BH8202
#OTC-1791 MSRP $2105.99
MSRP $645.13 MSRP $1115.30 SPECIAL
MSRP $2499.95 SPECIAL SPECIAL
SPECIAL $1399.99
$499.99 $699.99
$1899.99

TM 3/4ton WHEEL DOLLY 2pc High-Grip Wheel Chocks 20ton PAIR OF WIDE
TRUCK RAMPS
PAIR OF 4000 lb CAPACITY  Hydraulic system for removal & installation of  Works great on shop floors or lifts.
LIFTING BRACKETS single, tandem, and duplex tires and wheels; w/  Rubberized Material  Long retractable t-handle
lift arms can be adjusted to handle different provides extra slip resistance.  Non-skid rubber matting
 Attach directly onto component for lifting. wheel combinations.  High Compression.  Durable heavy-duty rubber wheels.
 Requires 1/2” diameter bolts.  Lift Range: 2¼” to 11”  Frame Length x Height: 47” x 9-1/4”
 Tilt Range: 2.5° to 10°. #ERN-980  Frame Width: 18-1/4”
#OTC-7100
#BHK-BH8075 $19.99 #OTC-5269
$49.99
MSRP $717.02 MSRP $999.95
SPECIAL SPECIAL

$459.99 $849.99

3/4ton LOAD LEVER 8ton CRANE JACK 3ton LONG RAMS
ENGINE SLING
1000LB H-FRAME  Fabricated from hard-cast steel w/ heat-treated  Made especially for use with engine cranes.
 Use w/ an Engine Crane ENGINE STAND critical stress areas  Collapsed height is 2 feet.
 Hand Crank to compensate  Height Range: 24-1/8” to 43-1/4”
for off balanced loads. #ALL-647513  Volume of Hydraulic Oil: 23.5 oz #IMP-20-LRJ3
 (4) chains & Mounting
Bracket included. MSRP $115.86 #BHK-BH2085 (Flat Base)
 Weight: 225 lbs SPECIAL
MSRP $187.76 $74.99
#SUN-5208 $99.99 SPECIAL

MSRP $102.97 1000lb. ENGINE CRADLE $124.99
SPECIAL w/ 4 POSTS
1250lb CAPACITY 2000lb CAPACITY
$79.99  Heavy-Duty steel construction allows for
storing, moving & servicing engines. ENGINE STAND FOLDING ENGINE STAND
MOTOR LIFT SLING  Universal mounting holes w/
8 bolts included 3/8” x 3/4”.  Head Plate locks in 8-positions & rotates 360°.  Dimensions: 33”(H) x 41.7”(L) x 28.5”(W)
For Lifting Automotive Engines.  Overall Height = 42-3/4”  Resistant to Structural Flex.
 Bolts to Motor Mounting Holes. #ALL-647009  Handle Length = 20-1/4”  Reinforced Mounting Plate.
 600 lbs Lift Rating  Weight = 87 lbs  Locks in 8-Positions.
 Weight: 2.7 lbs SPECIAL  Weight = 132 lbs

#APP-PP7134 $64.99 #BHK-BH5106 #SUN-8400

$24.99 MSRP $268.33 MSRP $289.99
SPECIAL SPECIAL
PORTABLE WHEEL STEP
$179.99 $234.99
 Adjusts to 3-positions vertically & has 3-
settings for various wheel depths, up to 9-1/2” 700lb Engine Support Bar 700lb Engine Support Bar
wide.
 Tire Range: 14” to 20” Self-centers load preventing tipping, PVC  Supports engines of FWD vehicles.

coated legs don’t scratch vehicle surfaces, and  Includes 1/8" braided steel cables and 1/4"
the spinner handle enables lighting fast adjust- adjustable hooks.

ment.  Adjustable Length:
+ Min 31” & Max 64”

#ALL-647596 #OTC-1725 #AST-5820

MSRP $57.95 MSRP $299.95 MSRP $97.90
SPECIAL SPECIAL SPECIAL

$49.99 $254.99 $79.99

20ton TRUCK RAMPS 1.5ton Capacity Folding Floor Crane 4000lb Capacity Folding Floor Crane

 Non-skid rubber matting enhances safety.  RapidRise Hydraulic Jack, raises boom 6x’s faster than other cranes.  Fold up for compact storage, out of your way.
 Durable heavy-duty rubber wheels.  Chain & Swivel Hook Assembly, allow for easy positioning of engine.  Max Capacity w/ Boom Extended:
 Overall length: 45⅝“, tread width: 10¾”  Features 4 Positions for different Capacity, Length, & Height. + 1000 lbs @ 48”
 Boom Length Range: 27” - 48”  Max Capacity w/ Boom Retracted:
#BHK-BH5200 (Pair)  Capacity Range: 750 - 3000 lbs. + 4000 lbs @ 26”
 Minimum Height Range: 0” - 11.75”  Front Wheels Diameter:
MSRP $946.41 + Front 3-1/2” / Rear 5-7/8”
SPECIAL #SUN-5218
#OTC-2004
$599.99 MSRP $773.99
SPECIAL MSRP $779.95
SPECIAL
$499.99
$649.99

1500lb. MOTORCYCLE LIFTS Clutch & Flywheel Handlers

 Features: 11.5” lifting saddles,  Features: foot pedal release,  Comes w/ (2) 10” Spline Shafts: 2” & 1.75”  14” and 15-1/2” Clutch Assemblies weighing
 Features: 360° Rotating Handle, up to 250lbs.
protective rubber pads, locking rear casters, 90° Swivel Saddle,  2” splined shaft with 1-1/4” pilot to aid in
swivel casters, auto safety lock, & 24” Wide Base for Stability. alignment.
 Height Range: 11.3” to 38.6”  360 Degree swivel head
3-position safety lock, & (2) ratcheting tie down straps.  Shipping Weight: 132 lbs
& Multiple Tie-Down Points.  Lift Range: 3-1/2" to 16-3/4". #OTC-5018A
#SUN-7790
 Lift Range: 4-1/2” to 14-1/2”  17" skids MSRP $1059.95
 Weighs: 63 lbs. MSRP $979.99 SPECIAL
SPECIAL
#PRO-T2152 #OTC-1545 $964.99
$799.99
MSRP $155.29 MSRP $269.95
SPECIAL SPECIAL

$114.99 $229.99

USA MADE JACK STAND COVERS HEAVY-DUTY JACK STANDS
JACK STAND PAIRS
Made of high-compression, rubberized material, & RATCHET STYLE #BHK-BH5120 TM
3-TON fits most 2-ton to 6-ton jack stands.
 Height Range: 11-1/2” to 17” #BHK-BH5030 (12 ton pair) HYDRAULIC BOTTLE JACKS
#ERN-965
+ 5/8” intervals (3 ton pair) $129.99 Heat treated extension screw allows low pick-up
 Weight( pair): 26-lbs SPECIAL height adjustment and maximum lift height. US
$39.99 Patented built-in by-pass device protects hydrau-
#HEI-HW93503 $9.99 lic system from over pumping damage. Cross-
type forged release valve assures positive con-
MSRP $143.10 #BHK-BH5060 trol. A wide, rugged base provides stability &
SPECIAL
(6 ton pair) strength.
$99.99
$69.99
6-TON
 Height Range: 16-1/4” to 25-3/4” 2-TON

+ 5/8” intervals #OME-10025B
 Weight (pair): 45-lbs
3ton Ultra-Lightweight PIN STYLE $24.99
#HEI-HW93506 JACK STANDS
#BHK-BH5010 4-TON
MSRP $213.37  Features: 6 locking positions, heavy-duty
SPECIAL flanged based. (10 ton pair) #OME-10045B
 Height Range: 10-1/2” to 15-1/2” *Range: 28” - 47”
$159.99  Weight: ONLY 10 lbs! $34.99
$349.99
12ton JACK STANDS #SUN-1003AJ 6-TON
#BHK-BH5220
 Features: formed & welded steel frame, self- MSRP $167.99 #BHK-BH2060
lock ratchet handle, and baked enamel finish. SPECIAL (22 ton pair)
 Height Range: 19-1/2” to 30-3/4” $39.99
 Base: 12-5/8” x 11-3/8” $119.99 $229.99
8-TON
#OTC-1784D JACK STANDS (PAIR)
#BHK-BH2080
MSRP $184.95  4-legged Steel Base w/ Pads for Stability
SPECIAL  Large Saddles w/ Locating Lugs for support. PORTO-POWER® SETS $49.99

$159.99 #SUN-1003  Snaps together in seconds and has a built-in

Heavy-Duty 22ton - Capacity: 3 TON overload system to assure you of maximum 12-TON
JACK STANDS - Lift Range: 11¼” to 17” protection against equipment damage.
- Shipping Weight: 16 lbs #OME-10125B
 Multiple Hole Locations,  Features: heavy-walled extension tubes,
w pin attached to avoid loss. $49.99 flex-head w/ permanently molded rubber pad $69.99
 Base: 10” x 10”.
 Lift Range:11.8 x 19.7". #SUN-1006 (interlocked to prevent separation), long handle
 Saddle: 2.3” x 3.5".
 Weight: 36lbs. each - Capacity: 6 TON $69.99providing low pumping effort, & 1/2 ton hydraulic
- Lift Range: 15½” to 24” spreader w/ 2” jaws & spreads 5/8” to 3-3/4”.
#SUN-1522 - Shipping Weight: 38.5 lbs Works w/ ALL Blackhawk Porto-Power
#BHK-BH2125
MSRP $299.99 $89.99
*Shorty-Type
SPECIAL #SUN-1012
equipment.
$199.99 - Capacity: 12 TON
- Lift Range: 19½” to 30”) *20ton Kit NOW Available! Call for Price.
4ton 48” POWER JACK - Shipping Weight: 75 lbs
#BHK-B65114 #OME-18124C
 Lifting Nose = 4” OAL $199.99
+ Low Pick-Up, only 4.5” from Base (4 TON) *Air Actuated
 Features a Safety Shear Pin. UNDERHOIST STANDS
MSRP $354.12 $269.99
#APP-14100 #AST-1175 SPECIAL

SPECIAL Straight Stand $249.99 20-TON
- 1500 lb. Capacity
$69.99 - Range: 55” to 81⅓” #BHK-BH2200

5-Year $119.99 $99.99
Warranty
#AST-1102 #BHK-B65115 #BHK-BH2205
3000lb SCISSORS JACK
Tripod Stand (10 TON) *Shorty-Type
Spin Handle Grips & Ball Bearing Worm Gear - 2 ton Capacity MSRP $567.45
for Easy Turning. Lift Range: 4½” to 14”. - Range: 55⅓” to 85¼” SPECIAL $114.99

#ALL-640819 $134.99 $349.99 #OME-18204C

SPECIAL UNDERHOIST STANDS *Air Actuated

$24.99 Straight Stand $274.99
- 1500 lb. Capacity
- Range of 54¼” to 80¾”) 30-TON

#OTC-2015 #BHK-BH2300
$279.994 & 10 TON
$119.99
PORTA JACK KITS
#OTC-2016  Industry standard couplers are interchangeable

(foot pedal) w/ leading manufacturer's units.

$139.99  Single-speed hydraulic hand pump & ram

Tripod Stand w/ 4" stoke (4-Ton) 6" stroke (10-Ton).
- 2 ton Capacity
- Range of 58⅞” to 91⅝”)  Snap design of extension tubes. HIGH PERFORMANCE
BOTTLE JACKS
#OTC-2018A  Automatic overload system prevent damage.
 1/2-ton hydraulic spreader tool has
$149.99
2" jaws that spread from 5/8" to 3-3/8".

 Includes a sturdy plastic case.  Base, pressure cylinder, & oil reservoir from

 Carries a 2-year warranty. one internal part, provides more strength
 Includes: hydraulic pump, hose, ram, ram flat  Piston never contacts cylinder, so pressure will

base, (4) extension tubes, 1/2 ton spreader, tube be absorbed & will not damage jack if vehicle
coupling, ram toe, wedge head, serrated saddle, tilts.

flex head, plunger toe, 90° wedge head, & case. 12-TON

*10 ton storage case has wheels for mobility.

#OTC-1513B #OTC-1515B #OTC-5213
 8-7/8” to 17-3/4”
(4-TON KIT) (10-TON KIT)
 Weight 18lbs.
MSRP $299.95 MSRP $459.95
SPECIAL SPECIAL $159.99

$259.99 $389.99

20-TON

#OTC-5221

 9-1/4” to 18-1/16”,
 Weight 26.5lbs.

$199.99

TM MST-220i MIG, STICK, & TIG SOLAR POWERED AUTO AIR SCRAPER KIT w/
3-IN-1 WELDING SYSTEM DARKWELDING HELMETS 4 SPECIALTY BLADES
CUTMASTER® 42
End User Promo Package LARGE VIEWING AREA: 3.86” x 2.17”  Removes gaskets, paint, rust, & other materi-
The Most Affordable, Highest Quality  Perfect for automotive repair and customiza-  Durable, light weight material is corrosion als.
1/4 Plasma Systems on the Market! tion, mechanical contractors, farms/ranches, resistant & flame retardant; w/ high performance  Removes undercoating, seam sealers, etc.
 Front Panel LEDs indicate status conditions. maintenance and repair, & garage and job filters protects against UV & IR.  Comes w/ 1.77” Wide Blade, 1.75” L-Shape
 SL40 torch w/ 75 Head, makes it easy to add shops.  Utilizes high performance solar cells w/ 2 built- Blade, 1” Wide 45 Blade, & 1” Wide Blade.
lead extensions or convert to a machine torch.  Allows you to choose the best process: in 3V lithium batteries as power back-up.  Built-in Regulator
 Auto Pilot Restart feature instantly reignites + MIG provides max productivity in the shop *Replacement Lens #TIT41264
the pilot arc while cutting expanded metals. + Stick works ideally outdoors #AST-1750K
 Incorporates Vent2Shield (V2S) technology. + TIG for applications requiring precise control #TIT-41265
 Max Output = 27amps @ 120v / 40amps @  Includes: 220 Amp MIG Gun, Argon/CO2 MSRP $91.43
230v Pressure Regulator / Gauge & Hose, Electrode (AMERICAN EAGLE) SPECIAL
 Recomended Cut = 1/4" (Max = 5/8") Holder & Ground Clamp, 230V-115V Adapter
 15 ft. Lead & 10 ft. Input Power Cable Plug & Cable, Drive Roll & Contact Tips, and CD #TIT-41266 $69.99
 Work Cable and Clamp with Multi-Language Operating Instructions.
 Spare Parts Kit  Max Output: 210 amp (FLAMES) AIR UNDERCOAT GUN
 Operating Manual  Max Thickness: 3/8" plate
#TIT-41267  Applies top quality undercoat to vehicles to
#FIR-14200 #FIR-1444-0872 fight rust & stone chips.
(SWOOSH)  Quick disassembly for faster cleanups.
MSRP $1895.83 MSRP $1850.83  Compatible w/ all popular brands of undercoat,
SPECIAL SPECIAL #TIT-41279 and applies in any viscosity.

PLEASE CALL FOR PRICE $1559.99 (SKULL WRECKER) #AST-UCG100

190pc. Rivet Nut/Thread PROMO PACKAGES #TIT-41288 MSRP $35.15
Setting Kits SPECIAL
Buy a MST-220i and Get One of these great (PIN-UP GIRL)
 Ergonomically designed w/ Quick Change packages for FREE! $29.99
Mandrel & Nosepiece allowing for an effortless This is a Mail-In Promotional Deal, and the
process when setting different size nuts. redemption form is available @ CRIMPLER™
 Packed in a Blow Molded Case www.FirepowerOnline.com/promotions Lug/Splicer Crimping Tool
SAE
Option #1 = TIG Torch Package  Delivers 1400-1800 lbs pull-out resistance.
#POP-PNT1101KIT 1441-0086 Auto Darkening Welding Helmet  Spring loaded mechanism holds
1442-0021 26V Tig Torch, terminal / lug in place.
Metric 1444-0900 Basic Welding Cart  Jaw Opening: up to 1”.
 Cable Capacity: 6-4/0
#POP-PNT110MKIT
#FIR-1423-1209

$39.99

Option #2 = Spool Gun Package #TIT-41290 MEDIUM DUTY OUTFIT

1441-0086 Auto Darkening Welding Helmet (GEAR HEAD)  Includes: RF 250 Regulators, Cutting Attach-
1444-0894 MIG Spool Gun
ment, Welding Nozzle, Series 3 Cutting Tip,
20ft x 3/16” R-Grade Hose, Striker, & Goggles.

 Torch Handle w/ built-in flashback arrestors
& check valves.

 Welds up to 5/64”
 Cuts up to 1/2”

MSRP $142.98 MSRP $133.17 #FIR-0384-2571
SPECIAL SPECIAL
YOUR CHOICE MSRP $298.80
YOUR CHOICE SPECIAL
$99.99
$99.99 $259.99
Swivel Head Hand Riveter
Industrial Hand Riveter Kit 1/4" SUPER-DUTY RIVETERS RIVET TOOL FOR
Swivels a FULL 360°! PLASTIC RIVETS
 Features: drop-forged steel handle, aluminum (5) sizes of aluminum & steel rivets, 1/8", 5/32",
 Includes (4) noses sizes: alloy body w/ steel insert, & jaws. 3/16", 7/32", and 1/4". Bottle catches rivet  Sets all sizes using a single nosepiece, &
3/32”, 1/8”, 5/32”, & 3/16”  Return spring for easy loading and ejecting. stems. Won't damage painted, plated or easily marred
‧ Includes 4 nosepieces: surfaces
#AST-1434 #TOO-19800  Long reach design accesses areas not
- 3/32", 1/8", 5/32" & 3/16" accessible with lever type tools.
MSRP $38.48  Blow molded case. (2-14” Reach)
SPECIAL SPECIAL #TOO-19400
#AST-1432
$29.99 $44.99 SPECIAL
MSRP $33.00
SPECIAL #TOO-19830 $29.99

$19.99 (5-3/4” Extended Reach)
SPECIAL

$54.99

1/4” CAPACITY HAND RIVETERS 13” Nut/Thread Setting Riveter SAE/Metric Kit AIR RIVETERS

 Increase Power while reducing shock.  New "Toolless Quick-Change Head" design allows easy changing of #AST-PR36
 Includes the following Sizes of Nosepieces:
1/8" (3.2mm), 5/32" (4mm), 3/16" (4.8mm), 7/32", & two 1/4" (6.4mm). mandrels and nose pieces by hand, disassembly of tool never required! (3/16” rivets)
 Spent mandrels are collected in plastic container for safety & disposal.  Ergonomic grip w/ a shorter handle and double compound hinges. MSRP $122.85
SPECIAL
#AST-1423 (13”) #AST-1426 (21”)  (6) interchangeable mandrel/nosepiece sets & 10pc rivet nut kit:
- SAE = 10-24, 1/4"-20, & 5/16"-18. $94.99
MSRP $40.80 MSRP $45.03
SPECIAL SPECIAL - Metric = M5, M6, & M8.

$34.99 $39.99 #AST-1442 #AST-PR14

MSRP $115.85 (1/4” rivets)
SPECIAL MSRP $153.33
SPECIAL
$89.99
$119.99

HEAT GUNS DUAL TEMP Heat Gun Kit 5-1/8oz Ultratane Butane TM

1680watt INDUSTRIAL QUALITY  Ideal for stripping paint, removing decals/  Triple-refined formula reduces filter clogs. Magnetic Soldering Clamp
 Temps up to 750°F. stripes, shrinking wire wrap, etc.  Contains no CFCs (chlorofluorocarbons).
 Features: universal motor, diecast aluminum Double Insulation for extra safety  Will not harm the ozone layer. Alligator clamps firmly hold wire
housing, reinforced mica-insulated ceramic  (2) Settings = Low: 572° F / High: 932° F  Comes with a convenient & small parts when soldering.
heating element & externally replaceable carbon  Comes w/ a total of (4) Nozzles: single piece universal filling tip.
brushes. + Large & Small Deflector Nozzles #LIS-55000
+ Large & Small Reduction Nozzles #MAS-51773-72
#MAS-HG501A  Packaged in a Blow-Molded Case. $19.99
$5.99
MSRP $149.81 #AST-9425
SPECIAL
MSRP $36.58
$134.99 SPECIAL

$29.99

1550W Heavy-Duty HEAT GUN INDUSTRIAL High-Quality BUTANE TORCHES PORTABLE
 Variable Temperature: 120°F to 1,100°F. Variable Temp Heat Gun SOLDERING KIT
 Operates on 120 volts LIGHTER
 10ft Power Cord.  Cool Air Setting; both cools down tool  Generates 2500°F. Electronic ignition w/ adjustable temp control.
and works for no-heat applications.  Butane refillable. Butane powered. Multiple tips for shrink wrap-
#DWA-D26950  (3) Power Settings  Safety lock with chain. ping, hot-air injection cutting & soldering.
+ Max Temperature: 1000-1100° F
MSRP $125.34  Powerful Blower moves 23 CFM #MAS-MT5 #PWR-PPSK
SPECIAL  (3) Position Non-Slip Steel Base
$11.99 MSRP $71.53
$89.99 #AST-9426
COMPACT MICROTORCH™ SPECIAL $64.99
120 VOLT ECONOMY HEAT GUN MSRP $99.25 • Adjustable & wind resistant flame,
 Economical, lightweight, multi-use heat gun SPECIAL w/ temperatures up to 2500°F.
perfect for automotive applications. * Fuel Cells Not Included
 (2) Heat Settings $79.99 Order Separately #RC31 (2 pack)
= 500°F & 1000°F.
#MAS-MT11
#MAS-EC100
$14.99
$49.99
STANDARD MICROTORCH
12.5amp 120v HEAT GUN 3 in 1 SELF-IGNITING  Up to 2400°F pinpoint flame. SELF IGNITING
 Durable ABS body, Double insulated, 6.5ft TRIGGERTORCH™ KIT  Self-igniting, w/ adjustable flame. HEAT TOOL KIT
cord, & 3-position rocker switch: off, high, & low.  Hand-Held or Tabletop use.
 Rated Power: Butane Powered Flameless Heat Tool Kit  Built-in refillable plastic FOUR TOOLS IN ONE! Soldering Iron, Blow
Low 750W / High 1500W fuel tank, w/ a 2 hour run time. Torch, Hot Blower and Hot Knife. Fully adjust-
 Temperature (F): Kit Includes: 3-Tips (solder, heat, & hot knife), able temperature (25W-125W). Instant heat. 2
Low : 572° / High : 932° shrink attachment, polyfoam cutter, 5” wire #MAS-MT51 hour time between refills. Gas level clearly
cutter, 5” needle nose pliers, table top stand, visible in tank. Iron plated soldering tips.
#TIT-22400 60/40 solder & sponge. $29.99
#WEL-PSI100K
MSRP $33.71 #MAS-MT76K MICRO TORCH KIT
SPECIAL MSRP $119.76
$69.99  #PPMT- Micro Torch w/ flame adjustment from SPECIAL
$24.99 1/2" to 2-1/2", excellent for soldering & brazing.
$99.99
- Max temp of 2500 F. (Torch mode)
14.1oz AirFuel Tanks - Max temp of 950 F. (Soldering mode)
 Kit Includes: Heat Blower Attachment & Tip,
PROPANE Soldering Attachment & Tip, Heat Shrink, Hot
Knife, & Tube of Solder.
#FIR-0387-0436
#PWR-PPMTKIT01
$9.99
MSRP $112.50
SPECIAL

$84.99

MAP/PRO™ AirFuel MP-90 AirFuel STANDARD
Manual Light Hand Torch Auto Ignition Hand Torch SOLDERING GUN KIT
#FIR-0916-0122
 Swirl combustion tip maximizes heat & re-  Auto Igniter for Instant Flame. Includes Built In Gun rest and extra fittings.
$9.99 duces brazing time by 30%.  Trigger Lock-On Button.
 Works w/ both #WEL-7200PK
AirFuel Pencil Tip Torch Propane & MAP/Pro.  Works w/ both Propane & MAP/Pro.
MSRP $46.77
 Solid Bass Burn Tube Construction. #FIR-0387-0400 SMP-31 TORCH SPECIAL
 Works only w/ Propane.
SPECIAL #FIR-0387-0463 $34.99
P-10 TORCH
$39.99 $64.99 PROFESSIONAL SOLDERING KIT
#FIR-0387-0470  Tin Plated Cooper soldering tips provide
AirFuel SMP-41 SMPK-31 KIT superior heat transfers, and 2 Built-in Lights
$24.99 Auto Ignition Hand Torch help to illuminate work.
#FIR-0387-0464  Extra tips for Cutting,
PK-10 KIT  Auto Igniter for Instant Flame. Smoothing and Shaping.
 Trigger Lock-On Button. $54.99
#FIR-0387-0471  Works w/ both #WEL-D550PK
Propane & MAP/Pro.
$34.99 MSRP $87.73
#FIR-0387-0465 SPECIAL

SPECIAL $64.99

$74.99

Standard & Heavy-Duty FLEX HONE FOR ROTORS 4-5/8” RUBBER SUCTION
CUPS
TM Engine Cylinders Hones Reduces friction induced braking noise.
FINE Single
BRAKE CYLINDER HONES  Produces a controlled surface condition unob-  Capacity = 77 lbs.
#BRM-RMFH240Z25
Available sizes between 3/16” to 3” diameter, tainable by any other method. #AST-9038
 The process involves finish, geometry & MEDIUM
with an Overall Length of 8”. $9.99
The standard grit sizes (120 & 180) are in metallurgical structure. #BRM-RMFH120Z25
 A high percentage plateau surface is Double
stock, w/ the finer/coarser grits normally COARSE  Capacity = 165 lbs.
available for special order. produced free of cut, torn and folded metal.
 Standard sizes available between 3” to #BRMRMFH60Z25 #AST-9039
#BRM-BC5818 #BRM-BC11818
4½”diameter, with an OAL of 13½”. YOUR CHOICE $14.99
(5/8") (1-1/8")  Heavy-Duty flex hones expand / condense ¼”,
$44.99 WINDSHIELD REMOVAL
$15.50 $18.51 sizes available between 3” to 9” diameter, with TOOL
an OAL between 13½” to 17½”. SURFACE PREP
#BRM-BC7818 #BRM-BC11418 MATERIAL  Removes windshields, backlights, and bonded
The standard grit sizes (120 & 180) are in backlights, by cutting the sealant around win-
(7/8") (1-1/4") stock, w/ the finer/coarser grits normally #AST-2SPK dows w/ specially designed blade.
 Pull handle provides additional leverage
$16.48 $19.95 available for special order.  2” SURFACE PREPARATION KIT includes;  Extra blade supplied with each tool
- 1-Disc Holder
#BRM-GB31218 #BRM-GBD30018 - (4) 2” Rolock Surface Prep Pads. #TOO-87900

(3-1/2”) (2-3/4” to 3”) MSRP $11.10 SPECIAL
SPECIAL
#BRM-BC10018 #BRM-BC13818 $42.86 $58.33 $19.99
$9.99
(1") (1-3/8") #BRM-GB31412 #BRM-GBD40018 ONYX Air Windshield

$17.60 $20.49 (3-1/4”) (3-3/4” to 4”) Remover

$40.22 $70.91 20,000 oscillations per minute.
Sealant Cutter - cuts around bonded & encapsu-
#BRM-GB33418 #BRM-GBD41412 lated glass. Efficiently cleans and smoothes
moldings after glass removal. Flexible blade
(3-3/4”) (4” to 4-1/4”) mount can be positioned in 12 different ways.
Features: Rear Exhaust, Safety Lever, and 3-
$46.15 $75.78 Blades.

#BRM-GB41812 #BRM-GBD50018 + 57mm Bent, 52mm Bent Curved, 35mm Flat
-Nose Straight (8 other assorted blades sold
(4-1/8") (4-1/2” to 5”) separately)

3lb DENT PULLER KIT $49.10 $91.81 #AST-WINDKO

Ideal Tool Kit for Do-It-Yourself #AST-25C MSRP $131.38
Autobody Repairs
- Plastic Bag w/ (25) SPECIAL $99.99
Features 3” coarse prep pads.
 Durable Construction w/ Drop Forged, Heat- MSRP $51.20 7pc Autobody Hammer Set
Treated Steel Shaft & Attachments. SPECIAL w/ Fiberglass Handles
 Fingergrip Handle for Sure-Grip.
Kit Includes $49.99  Includes: bumping hammer, pick & finish
 (1) 3 lb Malleable Steel Slide Hammer. hammer, reverse curve hammer, utility dolly,
 (1) Steel Nose Cone #AST-50C double end dolly, shrinking dolly, & curve dolly.
 (2) 3/4” Nuts
 (1) Plate Puller - Plastic Bag w/ (50) #TIT-15084
 (1) Steel L-Puller 2” surface prep pads.
MSRP $56.06 MSRP $73.30
#IMP-16-DP3 SPECIAL
SPECIAL $59.99
$19.99 $49.99
AUTO BODY REPAIR KIT
Fastener & Molding 20 PIECE WIRE 6pc Slim-Profile Multi
Remover Sets BRUSH SET Wedge Trim Panel Set Set includes; Curved dolly, Utility dolly, Double
end hand dolly, Shrinking dolly, Standard bump-
#AST-4505 (5pc) • Includes (1) brush each in stainless steel,  Specially shaped for numerous different appli- ing hammer pick, Finish hammer, & Reverse
brass & nylon in the following sizes: 1/4", 3/8", cations such as removing dashboards, air vents, curve hammer.
$9.99 1/2", 5/8", 3/4", and 1". door panels, door locks, electronic seat controls,
• Quick Disconnect: ergonomic handle for seat levers, center consoles, gear shifter and #IMP-04-AR7
#AST-4524 (11pc) manual use or extension adapter for use w/ more.
power tools.  High quality nylon material prevents scratches $39.99
$24.99 to painted surfaces and delicate panel surfaces
#AST-9020
4pc 10" Non-Marring #TIT-15048
Scraper Set MSRP $27.08
SPECIAL MSRP $16.88
• Sizes: 3/4", 7/8", 1", & 1-1/2”. SPECIAL
• Made of Impact Resistant Nylon, $19.99
and Ideal for the removal $14.99
of glued wheel weights 1-1/4" Stainless Steel
on aluminum rims, side Scraper
moldings, gaskets,
decals, emblems, etc.  Rigid stainless steel Go-Thru blade w/ metal
capped handle.
#AST-45040  TPR handle for maximum grip.
*Available in a 6pc Display Pack
SPECIAL
#TIT-11500
$9.99
SPECIAL

$9.99

ADHESIVE REMOVAL 4pc Super RANDOM ORBITAL TM
Absorbent Shammy BUFFER / POLISHER
4” Smart Pads Developed for Quick & Easy 7”/9” 12apm VS Electric
Removal of Pinstripes, Adhesives, • All purpose: wash, dry, & polish.  Random action reduces paint burn-through. Right Angle Polishers
Double-Sided Tape, and Moldings. • Durable non-scratching soft material.  Includes: (1) terrycloth bonnet &
• Reusable & machine washable. (1) synthetic wool bonnet.  All ball-bearing construction.
SMART ERASER • Towel Size: 24" Wide x 20" Long  Electronic Module Speed Control.
• To use w/ Die Grinders w/ a • Material: 70% viscose,30% polyester #TIT-22606 (6”)  No Load Speed: 0-600 / 0-3,500 rpm
Max Free Speed of 4,000rpm.
#TIT-19920 - Motor: 0.40amp, 3,500rpm #DWA-DWP849
#AST-400E (Pad Only) MSRP $40.05
SPECIAL SPECIAL  2-position side handle
SPECIAL  Rubber backing pad
$9.99 $34.99 MSRP $385.04
$14.99 SPECIAL
#TIT-22610 (10”)
#AST-232 (Kit) 32oz Non-Aerosol $229.99
Spot Sprayer! - Motor: 0.92amp, 3,000rpm
+ #203 Pinstripe Removal Tool MSRP $52.79
+ (12) #400E Eraser Pads  80-150 psi operating pressure (200psi MAX) SPECIAL
MSRP $238.33  Eliminates dangerous, harmful propellants.
SPECIAL  Refillable & No more aerosol disposal issues. $44.99
 Not for use with paint products.
$159.99 *Repair Kit Available Separately #TIT19420 SAND BLASTER 11 AMP VARIABLE SPEED
7” POLISHER / SANDER
SMART ERASER #TIT-19419  Includes: Hopper, Aluminum Blast Gun, and
• More aggressive eraser, faster removal times, SPECIAL Hook & Loop disk, Polishing Bonnet,
& less pressure required by the user. 15ft Material Hose & Rubber Pad Included!
• Leaves top-coat unharmed. $39.99  Use with an air compressor to remove rust,
 Dial Speed Control = 1000-3000 rpm
#AST-500E (Pad Only) #TIT-19421 paint, graffiti, corrosion & scale  (2) Handles: D-handle & side-handle.
(2pc Blue & Red)  Compatible with any abrasive: silica, sand,  Quick-Change Pad Connector.
SPECIAL SPECIAL
steel grit, glass beads & pecan shells #TIT-22530
$17.99 $69.99  Gravity feed for constant flow.
SPECIAL
#AST-500ARS6 (Kit) Portable 5gal 6.5HP  Operating Pressure: 90 PSI
Wet/Dry Vacuums  Minimum Air Requirement: 3.5 CFM @ 50 PSI $134.99
+ #500ET 2speed Adhesive Removal Tool
+ (6) #500E Eraser Pads  Powerful Motors w/ Ultra-Quiet Operation.  Hopper Capacity: 50 lbs
MSRP $198.23  Durable Lock-On Hose: 1-1/2” x 7-ft  Nozzle Size: 3/16”
SPECIAL + Accessory Assortment: Claw Nozzle, Crevice
Tool, & Adapter.  Air Inlet: ¼” NPT
$149.99  Also Includes: Wall Storage Bracket, Ultra-
Web Cartridge Filter, Filter Retainer, & High- #TIT-19450 PISTOL GRIP SPRAY
Professional 12gal 6.5HP Efficiency Disposable Filter Bag. CLEANER
Wet/Dry Vacuums MSRP $107.40
Specifications SPECIAL  Siphon Cleaning Gun, handles most cleaning
 Powerful Motors w/ Ultra-Quiet Operation.  Cord Length: 20-ft fluids, & is ideal for mixing water or soap solu-
 8” Rear Wheels, for better mobility.  CFM: 200 $89.99 tions for pressure cleaning.
 Crush Resistant Hose: 1-1/2” x 12-ft  Includes: 8ft clear vinyl tubing w/ weighted
+ Accessory Assortment: Claw Nozzle, Crevice #SHO-5872510 Cordless Wet-Dry Vacuum strain screen & fluid control valve, plus 10” spray
Tool, Adapter, & Elbow Grip. nozzle.
 Also Includes: (2) extension wands, Ultra-Web MSRP $176.00  Tank Size: 2-gal.
Cartridge Filter, Filter Retainer, High-Efficiency SPECIAL  Voltage: 18 or 20v MAX #TFL-18225
Disposable Filter Bag, 12” Floor Nozzle, Brush  Hose Length x Diameter: 5ft x 1-1/4"
Inset, & Squeegee Insert. $144.99  Filter: Wet/Dry (washable & reusable) SPECIAL
 Tool Attachments: Crevice & Wide Nozzle
Specifications *Battery & Charger Sold Separately. $39.99
 Power Cord Length: 20-ft
 CFM: 195 #DWA-DCV580 110v WATERBOURNE
ONLY PARTS WASHERS
#SHO-9621210 MSRP $179.44
SPECIAL 3.5 GALLON
MSRP $196.00  Can be moved easily
SPECIAL $124.99  Ideal for small garages, homes, businesses
 Seamless, rounded corner construction
$159.99
#IMP-20-PW312
Stainless Steel Replacement Wet/Dry
Filters MSRP $133.99
#SHO-9621310 SPECIAL
Standard
MSRP $296.00 $99.99
#SHO-903-04-00
SPECIAL $249.99 20 GALLON
SPECIAL  Self draining.
18v Battery & Charger  Convenient removable work shelf.
$14.99  Comes w/ parts basket
#DWA-DC9096 for soaking small parts.
Professional
(18v Battery) #IMP-20-PW20
#SHO-903-50-00 SPECIAL
MSRP $229.99
SPECIAL $99.99 SPECIAL

$24.99 #DWA-DC9310 $189.99

(18v Charger)
SPECIAL

$99.99