17 Post Top Mounted, Curvilinear, LED

Type: CC/CCS17
Job:
Catalog number: 17" Post Top Mounted, Curvilinear, LED

revision 8/27/12 • kim_cc17pled_spec.pdf

Approvals:

// //

Mtg. Fixture Electrical Module Finish Options
See page 2 See page 3 See page 4

Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for arm fitting. Date:
Page: 1 of 5

Specifications Housing: Spun aluminum. (Rollformed linear reveals;
CC: Three equally spaced reveals, K" wide, separated by K" ribs,
17" Diameter J" deep. CCS: One J" groove, J" deep.) Sidewalls have a maximum 1° of
60 Light Emitting Diodes taper, and are free of welds or fasteners. A rollformed aluminum flange is
Total System Watts = 66W hemmed into the bottom providing support for the reflector module. An internal
aluminum casting provides for mounting of the electrical module and support for
CC the housing hinge.

17" DIA. Lens Frame and Yoke: One-piece cast aluminum lens frame is attached to the
housing by a zinc plated cold rolled steel hinge with a stainless steel pin. Closure
(431.8 mm) of the housing is by a single self-retained stainless steel screw. A stainless steel
self-locking stop arm is provided to hold the housing in the open position while
8" CCS servicing. A F" thick clear flat tempered glass lens is fully gasketed by a one-
piece extruded and vulcanized silicone gasket. Lens is retained in the frame by
(203.2 mm) removable zinc plated steel clips. Lens frame is supported at four points two
aluminum U-shaped tubular arms cradled in a cast aluminum hub. Arms are
9" welded to the lens frame, and welded to the hub along their longitudinal axis.
Hub contains a field-splice compartment, a cast aluminum cover and one of the
(228.6 mm) following pole attachment means: FM - Flush Mounting or PT - Pole Tenon
Mounting (See page 2 for complete descriptions).
5K" DIA.
Electronic Module: All electrical components are UL and CSA recognized,
(139.7 mm) mounted on a single plate and factory prewired with quick-disconnect plugs.
Module includes a driver, LifeShield™ temperature control device and surge
protector. Electrical module attaches to housing with no-tool hinges and
latches, accessible by opening the lens frame only. Driver is rated for -40°F
starting and has a 0-10V dimming interface for multi-level illumination options.

®

Optical Module: Precision, replaceable MicroEmitter reflectors are
positioned to achieve directional control toward desired task. The entire
EmitterDeck™ mounting assembly fastens to the housing as a one-piece module.

Finish/Color: Finish is Super TGIC thermoset polyester powder coat paint, 2.5
mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray,
Stealth Gray, Platinum Silver, or White. Custom colors are available.

Warranty: Kim Lighting warrants Curvilinear LED products (“Product(s)”) sold
by Kim Lighting to be free from defects in material and workmanship for (i) a
period of five (5) years for metal parts, (ii) a period of ten (10) years for exterior
housing paint ®finish(s), (iii) a period of six (6) years for LED Light Engines
(MicroEmitter reflectors) and, (iv) a period of five (5) years for LED power
components (LED Driver, LifeShield temperature control device, surge protector),
from the date of sale of such goods to the buyer as specified in Kim Lighting
shipment documents for each product.

CAUTION: Fixtures must be grounded in accordance with national, state and/or
local electrical codes. Failute to do so may result in serious personal injury.

Listings and Ratings
ETL1 to UL Standard 8750

1Suitable for wet locations.

KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

© 2012 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Type: CC/CCS17
Job:
17" Post Top Mounted, Curvilinear, LED

revision 8/27/12 • kim_cc17pled_spec.pdf

Page: 2 of 5

Standard Features

Mounting

EPA: 0.7 0.7
Cat. No.: FM Flush Mount PT Pole Tenon Mount

Pole Top 3C", 4", 4K", or 5" Dia. 2" Pipe-size Tenon
Requirements: (2C" O.D. x 4L" L)

Fixture CC 17 Px Light Distribution:
Cat. No. designates CC/CCS
fixture and light distribution. Housing: Distribution: Type I Type TIIYPE I TTypYePEIIII TYPE II TYPE II T
CC 1 = Type I Full Cutoff TYPETIYPETIYPE ITYPETIYI PETIIYPE ITIYPETIYIIPETIIYIPE IITI YPETIYVPE
NOTE: Curvilinear system CCS 2 = Type II Full Cutoff
employs Nichia’s SSL product.
Part number: NS6x183 Size: 3 = Type III Full Cutoff
(NS6L183-H3,NS6W183-H3) 17 = 17” Small
60 LEDs 4 = Type IV Full Cutoff
TYPE I
P = Post Top TYPE5RLTI=Y=I=IPTTTEyyyppIpIeeeLRVLRSeiqfTgtuYhFatPurFTEelluYFIClVPlOuuECltnlouICeTIftIf-ouYOWftPfonaENfTefTyL-oYYWOLPPBenEaEfateyTcILTFT-VYkTLoWYy-lhPerpNiPwgrfaEOeotEBhyawLIntrIVLdVeeT-OfWYt PnaEeOySTTT-yqRWYORYnNpuTPeiPTeanagoYE-ErYeyVhWePTVB-PtRREWYaaEOiyPcIgaLVknEhyL-letTNeiRTRg-fYRyWBthipPigtghaeEhyttRLOLenfetTT-YTWYyPLPpaeEOEeyfVtnRLReiT-gWYhPtaEy R
TYPMEToYIuIPnEt I Rig

TYPE L TYTPYEPRE L TYPE R

One-Way Left OnOe-nWea-Wy RayigLhet ft One-Way Right

© 2012 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Type: CC/CCS17
Job:
17" Post Top Mounted, Curvilinear, LED

revision 8/27/12 • kim_cc17pled_spec.pdf

Page: 3 of 5

Standard Features

Electrical Module Cat. Nos. for Electrical Modules available: x
60L xK
NOTE: Curvilinear system
employs Nichia’s SSL product. Source: Color Temperature:1 Voltage:
Part number: NS6x183 60L = 60 LED’s 120 = 120V
(NS6L183-H3,NS6W183-H3) 4K = 4000K 208 = 208V
5K = 5000K 240 = 240V
2K = 580nm - Amber 277 = 277V
347 = 347V2
480 = 480V2

13000K is also available on an “Engineered-to-Order” (ETO) basis.
2Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral
step-down transformer.

Finish Color: Black Dark Bronze Light Gray Stealth Gray® Platinum Silver White Custom Color1

TGIC powder coat paint Cat. No.: BL DB LG SG PS WH CC
over a titanated zirconium
conversion coating. 1Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:

© 2012 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Type: CC/CCS17
Job:
17" Post Top Mounted, Curvilinear, LED

revision 8/27/12 • kim_cc17pled_spec.pdf

Page: 4 of 5

Optional Features

Photocell Factory installed photocell inside housing with a fully Photocell Sensor
Cat. No. (See right) gasketed sensor on the side wall.

No Option Cat. No. Line Volts: Cat. No. Line Volts:
A-30 120V A-33 277V
Dimming Controls A-31 208V A-35 347V
A-32 240V A-34 480V
Convex Glass Lens
Cat. No. CGL The Curvilinear LED driver is a 0-10V dimming interface, allowing 0-100% illumination output
when synchronized with a control and dimming system, provided by others. Kim Lighting is
No Option working with several control system manufacturers to develop a variety of proven turnkey
solutions to meet any application’s need. Kim Lighting will advise availability of complete control
Polycarbonate Lens packages, and even two-way monitoring systems, once they have been tested and exceed Kim’s
Cat. No. L17F high quality standards.

No Option The F" thick clear convex tempered glass lens replaces 1L"
standard flat glass lens. Provides increased lens
presence and provides a subtle improvement in (44.5 mm)
uniformity where pole spacing is extreme. Increases
effectiveness of houseside shielding.

Convex Glass Lens

Clear UV stabilized polycarbonate replaces standard flat glass
lens, gasketed and integral with lens frame.

CAUTION: Use only when vandalism is anticipated to be
high. Useful life is limited by UV discoloration from sunlight.

Polycarbonate Lens

Accent Reveals (For CC series only.) Three aluminum bands riveted Accent
Cat. No. (See right) inside the housing reveals. Available in five standard Reveals
Kim powder coat finishes. Custom colors available.
No Option

Color: Black Dark Bronze Light Gray Stealth Gray™ Platinum Silver White Custom Colors1

Cat. No.: BL-REV DB-REV LG-REV SG-REV PS-REV WH-REV CC-REV

1Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:

© 2012 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695

Type: CC/CCS17
Job:
17" Post Top Mounted, Curvilinear, LED

revision 8/27/12 • kim_cc17pled_spec.pdf

Page: 5 of 5

Lumen Data

Spectroradiometric 580nm - Amber Average 4000K Average 5000K Average L70 Data (calculated)
N/A N/A N/A 60,000 hours
Correlated Color Temp. CCT (K) N/A N/A N/A
Color Rendering Index (CRI) N/A N/A N/A
Power Factor

Electrical Drive Current Amps - AC System Watts
Volts - AC .55 66
120 .32 66
208 .28 66
240 .24 66
277 .19 66
347 .14 66
480

B.U.G. Rating (TM15) in Lumens wher B = Backlight, U = Uplight, G = Glare

Type I Type II Type III Type IV Type V Type L/R
B3 U0 G1 B1 U0 G1
N/A B2 U0 G2 B1 U0 G1 B0 U0 G1

Absolute Lumens

Temperature Type I Type II Type III Type IV Type V Type L/R
580nm - Amber N/A N/A N/A N/A N/A N/A
N/A 3414 3376 3428 3483 3281
4000K N/A 4163 4117 4180 4248 4001
5000K

LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.For
custom optics and color temperature configurations, contact factory.
*Data is prorated from 5000K IES files.

© 2012 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695