DIAMOND PRODUCTS
WAREHOUSES
Canada
13 15
20 14
19
12 18 2
11 61
16 3
7
10 17 4
8 5
United States
of America
9
Mexico
WAREHOUSE LOCATION INFO
« Main Office & Warehouse - Elyria, Ohio 800-321-5336
1. Cleveland, OH - 216-712-6973 11. Hayward, CA - 510-264-9199
12. Portland, OR - 503-232-3480
2. Kentwood, MI - 616-554-4686 (Specialty Equipment) 13. Coquitlam, BC Canada - 604-628-7272
3. Annapolis Junction, MD - 800-342-4750 14. Mississauga, ON Canada - 905-565-1355 - Regional Warehouse
4. Atlanta, GA - 888-472-2930 - Regional Warehouse 15. L’Assomption, PQ Canada - 514-990-2262
5. Orlando, FL - 407-896-1800 16. Aurora, CO - 303-373-2121
6. Franklin Park, IL - 847-678-9543 17. Dallas, TX - 972-247-8871
7. Blue Springs, MO- 877-990-1385 - Regional Warehouse 18. Nampa, ID - 800-225-0142 (Grooving & Grinding Division)
8. Stafford, TX - 281-491-0351 19. Oxford, NS Canada - 888-715-5111
9. Monterrey, Mexico - +52 (81) 8307-7477 20. Calgary, AB Canada - 403-287-0311
10. Orange, CA - 714-282-7816 - Regional Warehouse
TABLE OF CONTENTS
INFORMATION PAGES Diamond Products Headquarters - Elyria, Ohio U.S.A.
Table of Contents 1-7
Catalogs & Booklets 8
Point of Purchase Products Marketing Aids 9
Aggregate Map of the USA and Canada 10
Diamond Cutting Process 11
Diamond Blade Information 12
Website and Online Information 13
RPM Charts 14
Electrical Information 15
1
TABLE OF CONTENTS
WET BLADES 16
17
Imperial Purple Cured Walk Behind Wet Blades 18
Heavy Duty Orange Cured Walk Behind Wet Blades 19
Premium Black Cured Walk Behind Wet Blades 20
Pro Blue Cured Walk Behind Wet Blades 21
Super Premium Silver Cured Walk Behind Wet Blades 22
Mega Premium Green Cured Walk Behind Wet Blades 23
Giga Titanium Cured Walk Behind Wet Blades 24
Imperial Purple Asphalt/Green/Overlay Walk Behind Wet Blades 25
Heavy Duty Orange Asphalt/Green/Overlay Walk Behind Wet Blades 26
Premium Black Asphalt/Green/Overlay Walk Behind Wet Blades 27
Pro Blue Asphalt/Green/Overlay Walk Behind Wet Blades 28
Super Premium Silver Asphalt/Green/Overlay Walk Behind Wet Blades 29
Wall Saw/Hand Saw Blade Information and Specifications 30
Hydraulic Hand Saw Blades 31
Wall Saw Blades - Premium Black, Pro Blue, Super Premium Silver 32
Wall Saw Blades Specifications 33
Crack Saw & Loop Blades 34
Bevel & Refractory Blades 35
Joint Widening Blades and Chamfer Blades 36-37
Ring Saw Blades
Diamond Wire & Accessories 39
40-41
DRY BLADES 42
43
Dry Blade Specification Charts & Blade Bushings 44-45
High Speed Dry Blades 46
High Speed Ultimate Blades 47
High Speed Specialty Blades 48
High Speed Turbo Blades 49
X-Line Turbo Blades 50-51
High Performance Turbo Blades 52-53
Specialty Turbo - G.O. Blades and Graviton Blades 54-55
Specialty Turbo - Demo Cut and Fiber Cement Board Blades 56-57
Small Diameter Blades 58-59
Dry Walk Behind Blades
Masonry Blades 60
Tuck Point Blades 61
Tile Blades 62-63
64-67
CORE PREP 68-70
71-75
CORE PREP Products
CPG305 Hand Polisher 76
Polishing Pads 77
Cup Grinders 78
Floor Grinders - CPG80E, CPG100 & CPG200 79
Core-Lock Grinding, Grinding Inserts and Grinding Heads 80-81
82-83
FIRST-CUT PRODUCTS 84-85
First-Cut Early Entry Products 2
L8TR Blades for Late Early Entry Cutting
CC150XL-EE First-Cut Saws
CC190PRO-EE First-Cut Saw
BASIC First-Cut Blades
EXPERT First-Cut Blades
Skid Plates and True Early Entry System Information
TABLE OF CONTENTS
SAWING EQUIPMENT 88-89
91
Tile Saws - CC600T, CC912TS, CC900TE & CC1000T 92-93
CC300M Masonry Saw 94-95
CC500MXL2 Masonry Saw 96
CC800M Block Saw 97
CC1000 Mini Joint Cutting Saw 98
CC1100XL Small Joint Cutting Saw 99
CCE0900 Portable Saw 100-101
CC1200XL Portable Walk Behind Saw 102
CC1300XL Small Walk Behind Saw 103
CC1500E Modular Walk Behind Saw 104-105
CC1823BVXLP Propane Saw 106-107
CC1800XL Medium Walk Behind Saw 108
CC2500 Medium Walk Behind Saw 109
CC2525KCP Propane EFI Saw 110-111
CC3535JBVP Propane Saw 112-113
CC3500 Walk Behind Saw 114-115
CC3500E Electric Walk Behind Saw 116-117
CC4948DC Rear Pivot Saw 118-119
CC5048DC Front Pivot Saw 120-121
CC5555GK Rear Pivot Saw 122-123
CC6561GK Gas Large Walk Behind Saw 124-125
CC6571D Liquid Cooled Large Diesel Walk Behind Saw 126-127
CC6774DCV Walk Behind Saw 128-129
CC7574DD In-Line Deutz Turbo Diesel Walk Behind Saw 130-131
CC7574DK In-Line Kubota Turbo Diesel Walk Behind Saw 132-133
CC9074DK Deep Cut Saw 134-135
CC7875DT4 EZ Rider Saw 138-139
CC8574DD Rider Saw 140-141
C14, C14PRO & C16 Electric High Speed Hand Saws 142-145
THE CHOICE SYSTEM High Cycle Equipment - FU6D Inverter 146-147
THE CHOICE SYSTEM High Cycle Equipment 148
Hydraulic Hand Saws 149
Mini-Dragon Electric Ring Saw 150-153
Dragon Ring Saws - Hydraulic & Electric 156-157
CSH24 Chain Saw, Weka Chain Saw, CSE12 Chain Saw, Chains and Competition Chains and Bars 158-159
CC1600 Hydraulic Wall Saw 160-161
CC1600 Wall Saw Blade Guards 162-163
WSE1621 Wall Saw System 164
WSE2226 Walk Saw System 165
Hydrostress WCH17 & WCE17 Wire Saws 166
Hydrostress SB Wire Saws 167
Hydrostress CCH25 Hydraulic & THE CHOICE SYSTEM CCE25 Circular/Plunge Wire Saws 168
WS25 Wire Saw System 169
WS30-XLE High-Cycle Wire Saw 170-171
Wire Saw Accessories
WS50-XLE High-Cycle Wire Saw
3
TABLE OF CONTENTS
CORE BORE BITS 173
Core Bore Bit Information 174
Hyper Core Bore Line - Hyper Bit, Mach III & Ultra White 175
Star Blue & Standard Gold Wet Bore 176
Heavy Duty Orange Wet Bore 177
Premium Black Wet Core Bore 178-179
Large Diameter Heavy Duty Orange & Premium Black 180
Professional Wet Core Bore 181
Precast Wet Core Bore 182
Turbo Wet Core Bore 183
Specialty Turbo Core Bore 184
Pro Specialty - Commander Core Bore 185
Thinwall Wet Core Bore 186-187
Dry Hole Saws & Dry Vacuum Core Bore 188-189
Threaded Core Bits, Barrels and Caps 190
Carbide Rebar, Carbide Plate Cutter & Wood Core Bore 191-192
Specialty Core Bore Bits - Walk Duct, Step Bits & Pancake 193
Expansion Adapters & Information 194-197
Diamond Core Bore Segments and Crowns 198
Core Bore Bit Information 195
Core Bore Bit Resegmenting
4
Table of Contents
TABLE OF CONTENTS
CORING EQUIPMENT 202
203
Core Rig Basics 204-205
M1-AA-15 Rigs 206-207
M-1 Core Bore Rigs 208-209
M-2 Heavy Duty Core Bore Rigs 210-211
M-3 Stair Core Bore Rigs 212-213
M-4 Portable Core Bore Rigs 214-215
M-5 Quick Disconnect Core Bore Rigs 216-217
M-5PRO Professional Quick Disconnect Core Bore Rigs 218-219
M-6 Large Hydraulic Core Bore Rigs 221
Hydraulic Motors and Accessories 222-223
Milwaukee & Core Bore Mountable Motors 224-225
Weka Mountable Motors 226
CB215, CB515 & Weka Hand Held Motors 227
Core Bore Bit Adapters 228
Competition Style Drilling Adapters 229
Core Rig Masts/Columns 230
Core Bore Drilling Extensions 231
M-2 Angle Pivot Stands 232-237
Bit Roller Support
Drilling Accessories 238-239
240
CORE VAC 241
242
Core Vac Dust Bandits 243
Core Vac CV150C Hepa Wet/Dry Dust Control Vacuum 244-245
Core Vac CV258LC and CV258B Dust Containment Vacuums
Core Vac CV358B Dust Containment Vacuum 247
Core Vac CV300S Wet Slurry Vacuum 248-249
Core Vac CVG1 Dust Containment Vacuum 250-251
252
CORE POWER 253
254-255
Hydraulic Power Information 256-257
Hydraulic Power Units - CP15EXL, CP18BVXL, CP20EXL, CP22HXL
Hydraulic Power Units - CP35BVXL, CP38KXL, CP30EXL, CP40EXL Table of Contents
Hydra-Gen CPHG173-85 Hydraulic Power System
CPSK Open Generator Units
CP74D Skid Mount & CP74DDC Trailer Mounted Hydraulic Power Units
Custom Utility Truck
5
TYROLIT ABRASIVES TABLE OF CONTENTS
ABRASIVES 258
259
Tyrolit Abrasives Icons & Information 260
Abrasives Safety Information 261
Depressed Center Wheels - Cutting & Light Grinding 262-264
Comfort Start Information 265
Depressed Center Wheels - Grinding 266
Super-Thin Cut-Off Wheels 267
Cut-Off Wheels & Small Diameter Wheels 268-269
Cut-Off Wheels 270
High Speed Cut-Off Wheels with Universal Arbors 271
Flap Discs 272
Wire Brushes 273
Wire Wheels
Cups, Blocks, Stones & Grinding Wheels
6
GROOVING & GRINDING TABLE OF CONTENTS
GROOVING & GRINDING 276
277
CG1 & CG2 Mini-Groovers 278-279
TBG134 Bridge Deck Groover 280-281
PC1504 Pavement Grinder & Groover 282-283
PC4505 Pavement Grinder 284-285
PC6004EC Pavement Grinder 286-287
Barn Groover 288-289
CG3R Pavement Groover
Warranty Information
7
CATALOGS & BOOKLETS
Master Product Catalog First-Cut Booklet DP Basics Booklet
Full line catalog of diamond tools,
Presenting the full line of early entry Highlighting basic products for the
abrasives and equipment products - Update March 2020 Diamond Products Distributor
Part # LIT0003 Part # LIT0513 Part # LIT0017
CATALOGS & BOOKLETS Saw Lineup Booklet Training Booklet CORE VAC Booklet
Walk Behind Saws Offering instructional information on Dust Control Products
Part # LIT0009 cutting and coring Part # LIT0009 Part # LIT0009
Core Rig Lineup Booklet High Cycle Products
Core Rigs Part # LIT0009 Booklet
Featuring The Choice System
Part # LIT0511
Masonry & Tile Booklet
Masonry, Tile Saw and Diamond Tools
8 Part # LIT0514
POINT OF PURCHASE DISPLAYS
CUSTOM MODULAR
DISPLAY STANDS
Custom Is the Way to Go!
Modular Pegboard Design Lets You Pick Which
Display Parts You Need For Your Products
• Abrasive Display Rack
• Core Bit Display Rack
• Multiple Different Display Hooks
• Header Image Sign and Sub Header Text
• Product Description and Pricing Hooks
Header Signs, Shelving, Display Hooks,
Literature Holders, Abrasive Shelf Holders
and More
7’ 6”
19” POINT OF PURCHASE Displays
Deep
36”
Core Bit Holder Shelving to hold product boxes
and Hand Saws
Header sign for graphic Talk to your DP WALL SKINS
available with many options local Diamond
available in 4ft wide sections. Sticks to your existing
Products pegboard or slat-walls. 3ft tall sections with two header
Sales Person
for Ordering give you an 8ft tall section.
Logo Header (1’ tall x 4’ wide) Part # GS0014A
9 Main wall skin panel (3’ tall x 4’ wide) Part # GS0024A
AGGREGATE MAP
U.S. & CANADA
These are the basic aggregates Other types of aggregate can be found in
found in the shown areas: many parts of the U.S. and Canada
AGGREGATE Map Soft Pit Gravel Medium Hard Granite Hard Chert
Limestone Limestone River Rock Slate
Dolomite Quartz
Sandstone Medium Traprock
Traprock Basalt Flint Rock
Dolomite
Limestone Decomposed Quartzite Hard River
Granite Rock
Siliceous
Medium
Soft Shell Crushed
Gravel
SOFT MEDIUM MEDIUM MEDIUM HARD
SOFT HARD
10
DIAMOND CUTTING PROCESS
Diamonds Metal
Matrix
Blade Rotation
Blade Rotation
Cutting Edge Exposed Diamond
Fracturing and
#1 MATERIAL BEING CUT #2 Wearing Away
The exposed diamond crystals do the grinding work. The metal matrix or After several thousand passes through the material, the exposed diamonds
bond holds the diamond in place. Trailing behind each exposed diamond is begin to crack and fracture. The matrix holding the diamonds also begins to
a bond tail which helps to support the diamond. As the blade rotates through wear away.
the material, the exposed surface diamonds grind the material.
Blade Rotation Blade Rotation
#3 Embedded Cracked #4 Next Diamond
Diamond Diamond is Exposed
Fragments Are
Swept Away and the Cycle
Continues
Eventually the diamond completely breaks apart and its fragments are swept As the old diamonds are fractured and worn away they are replaced by new
away with the material it is grinding. When the blade is cooled with water this diamonds and the process continues until the segments are worn down to
material, included with water, produces slurry. the core.
#1 Rule for Diamond Blades:
Use a Hard Bond to Cut Something Soft and
Use a Soft Bond to Cut Something Hard
DIAMOND QUALITY - YOU GET WHAT YOU PAY FOR DIAMOND CUTTING Process
LOW QUALITY MEDIUM QUALITY HIGH QUALITY
SYNTHETIC SYNTHETIC DIAMONDS
SYNTHETIC DIAMONDS DIAMONDS
• Weaker crystals with irregular shape • Strongest crystals
• Shorter life & lower cutting rates • Good crystal strength & shape • Lasts longer
• Lower thermal stability • Good for sawing & drilling • Withstands high temperatures
• Does not handle steel & hard • Octahedral shape for increased tool
applications
aggregates well • Good cutting speed life & faster cutting
• Jagged points that break causing • Handles moderate steel & hard • High impact strength against steel &
faster wear & lower cutting & aggregate applications hard aggregate
drilling performance
• Widely used in low priced dry products 11
DIAMOND BLADE INFO
(X) Slant Seg MACHINE ICONS FOR BLADES:
Protection Large Walk Hydraulic High Speed
Behind Saws Hand Hand Saws
No extra charge on any blade. Saws
Used on cured concrete, asphalt
and green concrete blades
when undercutting conditions are
occurring
EXAMPLE BOND: C56HXM
(R) Radius Small/Medium Small Large
Walk Behind First-Cut First-Cut
Protection Saws <20HP
Low cost undercut protection for Saws Saws
average undercutting situations.
EXAMPLE BOND: A606TRM
Asphalt and Green
Concrete Wet Blades
(Q) Insert Protection Wall Masonry Block
Our most popular, maximum wear Saws Saws Saws
retardant protection used in tough
undercut conditions across North
America. Noted with an “I” in the
part number.
EXAMPLE BOND: A606PQM
Asphalt and Green
Concrete Wet Blades
Electric Tile Saws Tuck Point
Circular Grinder
To ensure Dry cutting products Saws
maximum use air to cool the
DIAMOND BLADE Information performance, blade. Intermittent cuts Right Angle Side Floor
water is required are required to allow Grinder Grinder Grinder
to cool these proper cooling. Dry
blades during the products can also be ASPHALT OVER
cutting process. used with water. CONCRETE
Wet Blade Diamond Depth By Quality Grade MATERIAL ICONS:
Quality Quality Diamond Segment GENERAL PURPOSE ASPHALT GREEN
Grade Code Depth Height CONCRETE CONCRETE
Imperial Purple Wet Cured I .394 .494 REINFORCED HARD AGGREGATE BRICK & BLOCK PAVERS
Imperial Purple Asphalt/Green I .312 .412 CONCRETE
H .250 .350
Heavy Duty Orange P .275 .375 TILE HARD TILE EPOXY & GLUE STONE
Premium Black T .310 .410
Pro Blue SP .375 .475
TH .310 .410
Super Premium Silver SH .375 .475
Pro Heavy Duty MP .437 .537
Super Heavy Duty
Mega Premium Green
Diamond Depth indicates the measurement of diamonds in a segment. FIBER DUCTILE IRON METAL WOOD
This measurement is different than the segment height. CEMENT
Segment height is the total measurement of the diamond depth plus the
backer pad.
A backer pad is the side of the segment that does not have diamonds in it to
ensure a good weld to the blade core.
12
WEBSITE & ONLINE INFO
REGISTER FOR YOUR ONLINE
ACCOUNT TO GET THESE BENEFITS:
• Net pricing
• Place orders with our easy ordering system
• Order history
• Order tracking and ship dates
• Create pricing quotes
• Download parts lists and operator manuals
• Access training information
Call 1-800-321-5336 to get
your login information
15 14 6048960: CC1800 XL, COMMON PARTS
18
19
13
36 37 38
21 38
SDCEATLAEIL1 A 17 22
:4 44 37
20
45 41 39 40 14
42 11 SDCEATLAEIL1 E
10 45 :4
VGBAULLAAVRDEDETO 6 48 A 12 44
54 46 49 9
43
16 10 12 4 COTRYNPE, RS 6
7
Check 35
under25 60
f‘oDuuloltcliusthmteoenwf tpeaabtrsiotitsne’C
for a E SDCEATLAEIL1 C
:5
55 WTOATVEARLVINELET
4 WEBSITE & ONLINE Information
manuals. 12 10 11
1 34 12 10 11
31
4 23 SDCEATLAEIL1
B 33 B
:4
30 32
www.diamondproducts.com
Current Company News
New Product Information
Order Confirmations
Place Orders
FOLLOW US ONLINE: Send Us Your Email Address
For the latest product updates,
press releases, promotions and more.
Send To: [email protected]
Diamond Products protects all contact information and will not sell, give or share any
consumer information with outside sources.
13
DIAMOND BLADE CUTTING SPEEDS & SAFETY
Things to Consider About Operating Speeds & Safety
Horsepower: High horsepower may require harder bonds and higher diamond Material Hardness/Abrasive: Harder, less abrasive materials require slower shaft speed.
concentration. Lower horsepower may require softer bonds and lower diamond Softer, more abrasive materials require faster shaft speed.
concentration.
WARNING: Operating saw blades at rotational speeds greater than the maximum
Shaft Speed: Increasing blade shaft speed makes the diamond blade cut harder. RPM can cause blade damage and possibly personal injury.
Decreasing shaft speed makes the blade wear faster.
Walk Behind Wet Dry Blades
Blades
Maximum Maximum
Blade Maximum Recommended Maximum Blade Cutting Safe Speed
Diameter Cutting Operating Speed Safe Speed Diameter Depth
Depth RPM
12” RPM RPM 4” 1”
14” 3-3/4” 4-1/2” 1-1/4” 18000
16” 2900 4500 1-1/2” 16000
18” 5” 15000
20” 4-3/4” 2900 3900 6” 2” 13000
24” 7” 2-1/2” 11000
26” 5-3/4” 2600 3400 8” 2-5/8” 9000
30” 9” 2-3/4 8300
36” 6-3/4” 2600 3000 10” 2-7/8” 7500
42” 12” 3-3/4” 6300
48” 7-3/4” 2450 2700 14” 4-3/4” 5400
54” 16” 4200
60” 9-3/4” 1950 2250 18” 5” 3800
72” 5-1/2”
10-3/4” 1950 2100
11-3/4” 1650 1800
14-3/4” 1300 1500
17” 1050 1300
20” 900 1000 Masonry Blades
22-1/2” 600 700 Maximum Recommended Maximum
Cutting Operating Speed Safe Speed
DIAMOND BLADE RPM CHARTS 25-1/2” 540 640 Blade Depth
Diameter RPM RPM
31-1/2” 500 500 5”
14” 2550 3900
Wall Saw Blades 18” 7”
20” 2300 3000
Blade Maximum Recommended Maximum 24” 8”
Diameter Cutting Operating Speed Safe Speed 2300 2700
Depth 10”
18” RPM RPM 2250 1950
20”
24” 6-1/4” 2600 3000 Tile Blades
30”
36” 7-1/4” 2450 2700 Blade Maximum Recommended Maximum
42” Diameter Cutting Operating Speed Safe Speed
48” 9-1/4” 1950 2250 Depth
54” 4” RPM RPM
60” 12-1/4” 1650 1800 4-1/2” 1” 8000 13000
72” 1-1/4” 7500 12000
15-1/4” 1300 1500 5” 1-1/2” 7000 11000
6” 1-3/4” 6050 9000
18-1/4” 1050 1300 7” 2-1/4” 5175 8000
8” 2-3/4” 4500 7000
21-1/4” 900 1000 9” 3-1/4” 4025 5400
10” 3-3/4” 3625 5300
24-1/4” 600 700
27-1/4” 540 640
33-1/4” 500 500
14
ELECTRIC POWER INFORMATION
Minimum Recommended
Generator Sizes
Saw H.P. Phase KW Soft Start
CC850ME1 5 1 15 --
CC850ME3 5 3 12
CC875ME1 7.5 1 20 --
CC875ME3 7.5 3 20
CC1305E1XL 5 1 15 --
CC1305E3XL 5 3 12
CC1875E1XL 7.5 1 20 --
CC1810E3XL 10 3 25
CC2515E 15 3 30 --
CC3520E 20 3 40 25kw
CC3530E 30 3 60 40kw
CC3725E 25 3 50 30kw
CC3730E 30 3 60 40kw
CC3740E 40 3 80 60kw
CC4120E 20 3 50 30kw
CC4130E 30 3 60 40kw
CC7250E 50 3 100 80kw
Note: Electric saws do not ship with electric cord or pigtails.
3-Phase powered saws do not include male electric connector
for control box
RECOMMENDED POWER CORD GAUGE-1 PHASE
Horsepower Phase Voltage Amps 50ft Cord 100ft Cord 150ft Cord 200ft Cord 300ft Cord
1.5 1 115 13 #12 #10 #8 -- --
1.5 1 230 6 #14 #14 #12 -- --
2 1 115 16 #10 #8 #6 -- --
2 1 230 8 #14 #14 #12 -- --
2.5 1 115 21 #10 #8 #6 -- -- ELECTRIC POWER Information
2.5 1 230 11 #14 #12 #10 -- --
5 1 230 23 #10 #8 #6 #6 #4
7.5 1 230 33 #8 #8 #6 #4 #2
CAUTION: Use of a wire gauge that is too small will cause loss of power or overheating and will damage the electric motor.
RECOMMENDED POWER CORD GAUGE-3 PHASE
Horsepower Phase Voltage Amps 50ft Cord 100ft Cord 150ft Cord 200ft Cord 300ft Cord
5 3 230 12 #14 #12 #10 #8 #6
5 3 460 6 #14 #14 #14 #14 #12
7.5 3 230 17 #12 #10 #8 #6 #6
10 3 230 24 #10 #8 #6 #6 #4
10 3 460 12 #14 #14 #12 #12 #10
15 3 230 36 #8 #6 #6 #4 #2
15 3 460 18 #12 #12 #12 #10 #8
20 3 230 52 #6 #6 #4 #2 N/A
20 3 460 26 #10 #10 #8 #8 #6
25 3 230 58 #6 #4 #4 #2 N/A
25 3 460 29 #10 #10 #8 #8 #6
30 3 460 37 #8 #8 #8 #6 #4
40 3 460 48 #6 #6 #6 #6 #4
50 3 460 62 #4 #4 #4 #4 #2
15
IMPERIAL PURPLE REINFORCED
CONCRETE
CURED CONCRETE BLADES
Imperial Purple-I
• .394” Diamond Depth
• Economical blades that work well for contractors who don’t have a heavy volume of cutting to do.
• Delivers the speed and convenience of a diamond blade compared with conventional abrasive blades that require frequent blade changes.
• Basic quality diamond and economical cutting value.
Cost Saving
Cutting
IMPERIAL PURPLE
WET CURED BLADES
SIZE PART # CAT #
14” x .125 CI14125M 36800
16” x .125 CI16125M 36808
18” x .125 CI18125M 36809
20” x .140 CI20140M 36811
20” x .155 CI20155M 39504
20” x .187 CI20187M 37037
24” x .155 CI24155M 36814
26” x .155 CI26155M 36815
26” x .165 CI26165M 39498
26” x .187 CI26187M 37039
30” x .155 CI30155M 36817
30” x .187 CI30187M 36818
36” x .187 CI36187M 36834
CURED CONCRETE Blades 1” arbor with drive pin hole standard.
For use on To ensure maximum AGGREGATE HARDNESS
walk behind saws. performance, water is MEDIUM AGGREGATE
required to cool these
blades during the cutting Imperial Purple Specifications for Light
process. to Medium Reinforced Concrete
C2650I
See page 10 for color coded aggregate map of the U.S. and Canada
16
REINFORCED HARD AGGREGATE HEAVY DUTY ORANGE
CONCRETE
CURED CONCRETE BLADES
HEAVY DUTY ORANGE Heavy Duty Orange-H
CURED CONCRETE BLADES • .250” Diamond Depth
SIZE SIZE Pro Heavy Duty-TH
• .310” Diamond Depth
10" x .110 24" x .140 • Taller segment, high
10" x .125 24" x .155 diamond concentration
12" x .110 24" x .165
12" x .125 24" x .175 Super Heavy Duty-SH
12" x .140 24" x .187 • .375” Diamond Depth
12" x .155 24" x .210 • Even taller segment and higher
12" x .187 24" x .250 diamond concentration
12" x .250 26" x .155 • Fast cutting blade that works well
12" x .375 26" x .165 with a wide variety of high or low HP
14" x .110 26" x .175 saws.
14" x .125 26" x .187 • Combines long life performance
14" x .140 26" x .250 while maximizing your blade dollars.
14" x .155 28" x .187
14" x .187 30" x .175 CURED CONCRETE Blades
14" x .250 30" x .187
14" x .375 30" x .210
16" x .125 30" x .250
16" x .140 32" x .175
16" x .155 32" x .187
16" x .187 32" x .210
16" x .250 32" x .250
18" x .125 36" x .175
18" x .140 36" x .187
18" x .155 36" x .210
18" x .165 36" x .250
18" x .175 42" x .187
18" x .187 42" x .210
18" x .210 42" x .220
18" x .250 48" x .210
20" x .125 48" x .250
20" x .140 54" x .220
20" x .155 60" x .220
20" x .165
20" x .187 ---
20" x .250 ---
---
HEAVY DUTY ORANGE Concrete Specification Chart 1” arbor with drive pin hole standard.
Custom arbor sizes/types are available.
Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD When ordering, please specify arbor size/type if different from 1”.
Hardness SOFT HARD * Additional blade sizes available upon request.
Reinforcement Light to Medium Reinforcement NO CHARGE FOR ‘X’ SLANT SEG
WEAR PROTECTION OR CUSTOM
Bond Spec C62H C60H C56H C52H C50WH
BOLT PATTERNS
Reinforcement Heavy Reinforcement (Example: LOUIE or ROGER bolt pattern)
Bond Spec C56H C56H C52H C51WH C45H
Soft Limestone Medium Hard River Granite Hard Chert
Sandstone Slate Quartz
Aggregate Dolomite Pit Gravel Rock Traprock To ensure maximum
Type Limestone Basalt Flint Rock performance, water is
Siliceous Limestone Medium Traprock Quartzite Hard River Rock required to cool these
Soft Shell blades during the cutting
Dolomite Decomposed Granite process.
Crushed Gravel
See page 10 for color coded aggregate map of the U.S. and Canada For use on walk
behind saws.
17
PREMIUM BLACK REINFORCED HARD AGGREGATE
CONCRETE
CURED CONCRETE BLADES
Premium Black-P PREMIUM BLACK CURED
• .275” Diamond Depth
• A high quality blade that delivers long lasting, fast BLADES
cutting performance.
• Designed for contractors who demand maximum SIZE SIZE
efficiency and value.
10" x .110 24" x .140
10" x .125 24" x .155
12" x .110 24" x .165
12" x .125 24" x .175
12" x .140 24" x .187
12" x .155 24" x .210
12" x .187 24" x .250
12" x .250 26" x .155
12" x .375 26" x .165
14" x .110 26" x .175
14" x .125 26" x .187
14" x .140 26" x .250
14" x .155 28" x .187
14" x .187 30" x .175
14" x .250 30" x .187
14" x .375 30" x .210
16" x .125 30" x .250
16" x .140 32" x .175
16" x .155 32" x .187
16" x .187 32" x .210
16" x .250 32" x .250
18" x .125 36" x .175
18" x .140 36" x .187
18" x .155 36" x .210
18" x .165 36" x .250
18" x .175 42" x .187
18" x .187 42" x .210
CURED CONCRETE Blades 18" x .210 42" x .220
18" x .250 48" x .210
20" x .125 48" x .250
20" x .140 54" x .220
20" x .155 60" x .220
1” arbor with drive pin hole standard. 20" x .165 ---
Custom arbor sizes/types are available.
When ordering, please specify arbor size/type if different from 1”. 20" x .187 ---
* Additional blade sizes available upon request.
20" x .250 ---
NO CHARGE FOR ‘X’ SLANT SEG
WEAR PROTECTION OR CUSTOM PREMIUM BLACK Concrete Specification Chart
BOLT PATTERNS Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD
(Example: LOUIE or ROGER bolt pattern) Hardness SOFT HARD
Reinforcement Light to Medium Reinforcement
Bond Spec C62P C60P C56P C52P C50WP
Reinforcement Heavy Reinforcement
Bond Spec C56P C56P C52P C51WP C45P
Soft Limestone
To ensure maximum Sandstone Medium Hard River Granite Hard Chert
performance, water Dolomite Slate Quartz
is required to cool Aggregate Limestone Pit Gravel Rock Traprock
these blades during Type Siliceous Basalt Flint Rock
the cutting process. Soft Shell Limestone Medium Traprock Quartzite Hard River Rock
For use on Dolomite Decomposed Granite
walk behind saws.
Crushed Gravel
See page 10 for color coded aggregate map of the U.S. and Canada
18
REINFORCED HARD AGGREGATE PRO BLUE
CONCRETE
CURED CONCRETE BLADES
PRO BLUE CURED BLADES Professional Blue-T
• .310” Diamond Depth
SIZE SIZE
Professional Blue Plus-T+
10" x .110 24" x .140 • .310” Diamond Depth
10" x .125 24" x .155 • Additional diamond concentration for
12" x .110 24" x .165 longer life
12" x .125 24" x .175 • Same high quality as our Premium Black
12" x .140 24" x .187 blade with a taller segment to lower your
12" x .155 24" x .210 cutting costs.
12" x .187 24" x .250 • Made for 35HP saws and larger
12" x .250 26" x .155
12" x .375 26" x .165 1” arbor with drive pin hole standard. CURED CONCRETE Blades
14" x .110 26" x .175 Custom arbor sizes/types are available.
14" x .125 26" x .187 When ordering, please specify arbor size/type if
14" x .140 26" x .250 different from 1”.
14" x .155 28" x .187
14" x .187 30" x .175
14" x .250 30" x .187
14" x .375 30" x .210
16" x .125 30" x .250
16" x .140 32" x .175
16" x .155 32" x .187
16" x .187 32" x .210
16" x .250 32" x .250
18" x .125 36" x .175
18" x .140 36" x .187
18" x .155 36" x .210
18" x .165 36" x .250
18" x .175 42" x .187
18" x .187 42" x .210
18" x .210 42" x .220
18" x .250 48" x .210
20" x .125 48" x .250
20" x .140 54" x .220
20" x .155 60" x .220
20" x .165
20" x .187 ---
20” x .250 ---
---
PRO BLUE Concrete Specification Chart
Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD * Additional blade sizes available upon request.
Hardness SOFT HARD
Reinforcement Light to Medium Reinforcement NO CHARGE FOR ‘X’ SLANT SEG
WEAR PROTECTION OR CUSTOM
Bond Spec C62T C60T C56T C52T C50WT
Reinforcement Heavy Reinforcement BOLT PATTERNS
(Example: LOUIE or ROGER bolt pattern)
Bond Spec C56T C56T C52T C51WT C45T
Soft Limestone Medium Hard River Granite Hard Chert To ensure maximum
Sandstone Quartz performance, water is
Aggregate Dolomite Pit Gravel Rock Slate required to cool these
Type Limestone Flint Rock blades during the cutting
Siliceous Limestone Medium Traprock Traprock Hard River Rock process.
Soft Shell
Dolomite Decomposed Granite Basalt
Crushed Gravel Quartzite For use on
walk behind saws.
See page 10 for color coded aggregate map of the U.S. and Canada
19
SUPER PREMIUM SILVER REINFORCED HARD AGGREGATE
CONCRETE
CURED CONCRETE BLADES
Super Premium Silver-SP SUPER PREMIUM SILVER
• .375” Diamond Depth
CURED BLADES
Super Premium Silver Plus-SP+
• .375” Diamond Depth SIZE SIZE
• Additional diamond concentration for longer life
• Especially well suited for sawing in 10" x .110 24" x .140
tough applications.
10" x .125 24" x .155
1” arbor with drive pin hole standard.
Custom arbor sizes/types are available. 12" x .110 24" x .165
When ordering, please specify arbor size/type if
different from 1”. 12" x .125 24" x .175
12" x .140 24" x .187
12" x .155 24" x .210
12" x .187 24" x .250
12" x .250 26" x .155
12" x .375 26" x .165
14" x .110 26" x .175
14" x .125 26" x .187
14" x .140 26" x .250
14" x .155 28" x .187
14" x .187 30" x .175
14" x .250 30" x .187
14" x .375 30" x .210
16" x .125 30" x .250
16" x .140 32" x .175
16" x .155 32" x .210
16" x .187 32" x .250
16" x .250 36" x .175
18" x .125 36" x .187
18" x .140 36" x .210
18" x .155 36" x .250
18" x .165 42" x .187
18" x .175 42" x .210
18" x .187 42" x .220
CURED CONCRETE Blades 18" x .210 48" x .210
18" x .250 48" x .250
20" x .125 54" x .220
20" x .140 60" x .220
20" x .155 ---
20" x .165 ---
20" x .187 ---
20” x .250 ---
* Additional blade sizes available upon request. SUPER PREMIUM SILVER Concrete Specification Chart
NO CHARGE FOR ‘X’ SLANT SEG Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD
WEAR PROTECTION OR CUSTOM Hardness SOFT HARD
BOLT PATTERNS Reinforcement Light to Medium Reinforcement
(Example: LOUIE or ROGER bolt pattern)
Bond Spec C62SP C60SP C56SP C52SP C50WSP
Reinforcement Heavy Reinforcement
Bond Spec C56SP C56SP C52SP C51WSP C45SP
Soft Limestone
To ensure maximum Aggregate Sandstone Medium Hard River Granite Hard Chert
performance, water is Type Dolomite Slate Quartz
required to cool these Limestone Pit Gravel Rock Traprock
blades during the cutting Siliceous Basalt Flint Rock
For use on process. Soft Shell Limestone Medium Traprock Quartzite Hard River Rock
walk behind saws.
Dolomite Decomposed Granite
Crushed Gravel
See page 10 for color coded aggregate map of the U.S. and Canada
20
REINFORCED HARD AGGREGATE MEGA PREMIUM GREEN
CONCRETE
CURED CONCRETE BLADES
MEGA PREMIUM GREEN Mega Premium Green-MP
CURED BLADES • .437” Diamond Depth
SIZE SIZE Mega Premium Green Plus-MP+
• .437” Diamond Depth
12" x .110 24" x .140 • Additional diamond concentration for longer life
• Extremely long life blade especially good for
12" x .125 24" x .155 hard aggregates.
• Delivers the lowest diamond tool cost
12" x .155 24" x .165 per inch foot in the industry.
12" x .187 24" x .175
12" x .250 24" x .187
12" x .375 24" x .210
14" x .110 24" x .250
14" x .125 26" x .155
14" x .140 26" x .165
14" x .155 26" x .175
14" x .187 26" x .187
14" x .250 26" x .250
14" x .375 28" x .187
16" x .125 30" x .175
16" x .140 30" x .187
16" x .155 30" x .210
16" x .187 30" x .250
18" x .125 32" x .175
18" x .140 36" x .175
18" x .155 36" x .187
18" x .165 42" x .187
18" x .175 42" x .210
18" x .187 42" x .220
18" x .210 48" x .210
18" x .250 48" x .250 CURED CONCRETE Blades
20" x .125 54" x .220
20" x .140 ---
20" x .155 ---
20" x .165 --- 1” arbor with drive pin hole standard.
20" x .187 --- Custom arbor sizes/types are available.
20” x .250 --- When ordering, please specify arbor size/type if
different from 1”.
MEGA PREMIUM GREEN Concrete Specification Chart
* Additional blade sizes available upon request.
Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD
Hardness SOFT HARD NO CHARGE FOR ‘X’ SLANT SEG
WEAR PROTECTION OR CUSTOM
Reinforcement Light to Medium Reinforcement
BOLT PATTERNS
Bond Spec C62MP C60MP C56MP C52MP C50WMP (Example: LOUIE or ROGER bolt pattern)
Reinforcement Heavy Reinforcement
Bond Spec C56MP C56MP C52MP C51WMP C45MP
Soft Limestone Medium Hard River Granite Hard Chert
Sandstone Slate Quartz
Aggregate Dolomite Pit Gravel Rock Traprock
Type Limestone Basalt Flint Rock
Siliceous Limestone Medium Traprock Quartzite Hard River Rock To ensure maximum
Soft Shell performance, water is
Dolomite Decomposed Granite required to cool these
blades during the cutting
Crushed Gravel For use on process.
walk behind saws.
See page 10 for color coded aggregate map of the U.S. and Canada
21
GIGA TITANIUM REINFORCED HARD AGGREGATE
CONCRETE
CURED CONCRETE BLADES
Giga Premium Titanium-GP Giga Supreme Titanium-GU
• .500” Diamond Depth
• .500” Diamond Depth
Giga Premium Plus Titanium-GP+
• .500” Diamond Depth • Ultra-High diamond concentration for maximum life
• Additional diamond concentration for • Especially well suited for sawing in
longer life
tough applications.
GIGA TITANIUM CURED
CONCRETE BLADES
SIZE SIZE
12" x .125 24" x .155
12" x .140 24" x .165
12" x .155 24" x .175
12" x .187 24" x .187
14" x .110 24" x .210
14" x .125 24" x .250
14" x .140 26" x .155
14" x .155 26" x .165
14" x .187 26" x .175
14" x .250 26" x .187
16" x .125 26" x .250
16" x .140 28" x .187
16" x .155 30" x .175
16" x .187 30" x .187
16" x .250 30" x .210
18" x .125 36" x .175
18" x .140 36" x .187
18" x .155 36" x .210
18" x .165 36" x .250
18" x .175 42" x .187
18" x .187 42" x .210
18" x .210 42" x .220
CURED CONCRETE Blades 20" x .125 48" x .210
20" x .140 -
20" x .155 -
20" x .165 -
20” x .187 -
1” arbor with drive pin hole standard. GIGA PREMIUM TITANIUM Concrete Specification Chart
Custom arbor sizes/types are available.
When ordering, please specify arbor size/type if different from 1”. Aggregate SOFT MEDIUM MEDIUM MEDIUM HARD
* Additional blade sizes available upon request. Hardness SOFT HARD
NO CHARGE FOR ‘X’ SLANT SEG Reinforcement Light to Medium Reinforcement
WEAR PROTECTION OR CUSTOM
Bond Spec C62GP C60GP C56GP C52GP C50WGP
Reinforcement Heavy Reinforcement
BOLT PATTERNS
Bond Spec C56GP C56GP C52GP C51WGP C45GP
(Example: LOUIE or ROGER bolt pattern)
Soft Limestone Medium Hard River Granite Hard Chert
To ensure maximum Sandstone Slate Quartz
performance, water is Aggregate Dolomite Pit Gravel Rock Traprock
Type Limestone Basalt Flint Rock
Siliceous Limestone Medium Traprock Quartzite Hard River Rock
Soft Shell
Dolomite Decomposed Granite
Crushed Gravel
For use on required to cool these See page 10 for color coded aggregate map of the U.S. and Canada
walk behind saws. blades during the
cutting process.
22
ASPHALT GREEN IMPERIAL PURPLE
CONCRETE
ASPHALT/GREEN CONCRETE BLADES
Imperial Purple-I
• .312” Diamond Depth
• Delivers the speed and convenience of a diamond blade compared with abrasive blades that require frequent blade changes.
• Basic quality diamond and economical cutting value
IMPERIAL PURPLE ASPHALT/
GREEN CONCRETE/ASPHALT
OVER CONCRETE WET BLADES
SIZE PART # CAT #
14” x .140 AI14140XM 36821 ASPHALT/GREEN/OVERLAY Blades
18” x .140 AI18140XM 36822
20” x .140 AI20140XM 36823
24” x .155 AI24155XM 36824
26” x .165 AI26165XM 36825
30” x .187 AI30187XM 36828
36” x .187 AI36187XM 36831
Includes Slant (x) Segment Wear Protection.
AGGREGATE HARDNESS For use on To ensure maximum
walk behind saws. performance, water is
MEDIUM AGGREGATE ASPHALT/ required to cool these
GREEN CONCRETE 23 blades during the
cutting process.
Imperial Purple Specification
A6000I
See page 10 for color coded aggregate map of the U.S. and Canada
HEAVY DUTY ORANGE ASPHALT GREEN ASPHALT OVER
CONCRETE CONCRETE
ASPHALT/GREEN/OVERLAY BLADES
ASPHALT/GREEN/OVERLAY Blades Heavy Duty Orange-H HEAVY DUTY ORANGE
• .250” Diamond Depth ASPHALT-GREEN
• Fast cutting blade that works well with a wide variety of high or
low HP saws. CONCRETE & ASPHALT
• Combines long life performance while maximizing your blade dollars. OVER CONCRETE WET
BLADES
See page 12 for undercut protection options
1” arbor with drive pin hole standard. SIZE
Custom arbor sizes/types are available.
When ordering, please specify arbor size/type if different from 1”. 12" x .125
* Additional blade sizes available upon request. 12" x .140
12" x .187
When determining an Asphalt, Green Concrete or Asphalt over Concrete 12" x .250
specification use this formula: 12" x .375
Blade type A, G or AC, (spec #) (grade) optional wear protection) M 14" x .125
A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete 14" x .140
Example: A606TRM or AC62SWSPQM 14" x .187
Low HP = 18 HP or lower 14" x .250
High HP = 20 HP or higher 14" x .375
16" x .125
16" x .140
18" x .125
18" x .140
18" x .155
18" x .175
18" x .187
18" x .250
20" x .125
20" x .140
20" x .155
20” x .165
24" x .155
24" x .175
24" x .187
26" x .155
26" x .187
30" x .175
30" x .187
32" x .187
36" x .175
36" x .187
SOFT MED. SOFT MEDIUM MED. HARD HARD
To ensure maximum H.D. ORANGE Cutting Asphalt with Low HP Saw Specifications
performance, water is
required to cool these A635H A615H A606H A605H A350H
blades during the H.D. ORANGE Cutting Asphalt with High HP Saw Specifications
cutting process.
For use on A665H A635H A630H A606H A605H
walk behind saws. H.D. ORANGE Cutting Green Concrete with Low HP Saw Specifications
G670H G660H G606H G606H G605H
H.D. ORANGE Cutting Green Concrete with High HP Saw Specifications
G670H G660H G606H G606H G605H
If you need a price for something not H.D. ORANGE Cutting Asphalt Over Concrete with Low HP Saw Specifications
shown, please call customer service at
AC64DWH AC64DWH AC64DWH AC62DWH AC62DWH
(800) 321-5336.
H.D. ORANGE Cutting Asphalt Over Concrete with High HP Saw Specifications
AC64DWH AC64DWH AC64DWH AC62DWH AC62DWH
See page 10 for color coded aggregate map of the U.S. and Canada
24
ASPHALT GREEN ASPHALT OVER PREMIUM BLACK
CONCRETE CONCRETE
ASPHALT/GREEN/OVERLAY BLADES
PREMIUM BLACK ASPHALT/ Premium Black-P ASPHALT/GREEN/OVERLAY Blades
GREEN CONCRETE/ASPHALT • .275” Diamond Depth
OVER CONCRETE WET BLADES • A high quality blade that delivers long lasting, fast cutting performance.
• Designed for contractors who demand maximum
SIZE efficiency and value.
12" x .125
12" x .140 See page 12 for undercut protection options
12" x .187 1” arbor with drive pin hole standard.
12" x .250 Custom arbor sizes/types are available.
12" x .375 When ordering, please specify arbor size/type if different from 1”.
14" x .125 * Additional blade sizes available upon request.
14" x .140
14" x .187 When determining an Asphalt, Green Concrete or Asphalt over Concrete
14" x .250 specification use this formula:
14" x .375 Blade type A, G or AC, (spec #) (grade) optional wear protection) M
16" x .125 A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete
16" x .140 Example: A606TRM or AC62SWSPQM
18" x .125 Low HP = 18 HP or lower
18" x .140 High HP = 20 HP or higher
18" x .155
18" x .175
18" x .187
18" x .250
20" x .125
20" x .140
20" x .155
20” x .165
24" x .155
24" x .175
24" x .187
26" x .155
26" x .187
30" x .175
30" x .187
32" x .187
36" x .175
36" x .187
SOFT MED. SOFT MEDIUM MED. HARD HARD
PREMIUM BLACK Cutting Asphalt with Low HP Saw Specifications To ensure maximum
performance, water is
A635P A615P A606P A605P A350P required to cool these
PREMIUM BLACK Cutting Asphalt with High HP Saw Specifications blades during the
cutting process.
A665P A635P A630P A606P A605P For use on
PREMIUM BLACK Cutting Green Concrete with Low HP Saw Specifications walk behind saws.
G670P G660P G606P G606P G605P
PREMIUM BLACK Cutting Green Concrete with High HP Saw Specifications
G670P G660P G606P G606P G605P If you need a price for something not
PREMIUM BLACK Cutting Asphalt Over Concrete with Low HP Saw Specifications shown, please call customer service at
AC64DWP AC64DWP AC64DWP AC62DWP AC62DWP (800) 321-5336.
PREMIUM BLACK Cutting Asphalt Over Concrete with High HP Saw Specifications
AC64DWP AC64DWP AC64DWP AC62DWP AC62DWP
See page 10 for color coded aggregate map of the U.S. and Canada
25
PRO BLUE ASPHALT GREEN ASPHALT OVER
CONCRETE CONCRETE
ASPHALT/GREEN/OVERLAY BLADES
ASPHALT/GREEN/OVERLAY Blades Professional Blue-T PRO BLUE ASPHALT/
• .310” Diamond Depth GREEN CONCRETE
• Same high quality as our Premium Black blade with a taller segment ASPHALT OVER
to lower your cutting cost.
• Best used with 35HP and up CONCRETE WET BLADES
See page 12 for undercut protection options SIZE
1” arbor with drive pin hole standard.
Custom arbor sizes/types are available. 12" x .125
When ordering, please specify arbor size/type if different from 1”. 12" x .140
* Additional blade sizes available upon request. 12" x .187
12" x .250
When determining an Asphalt, Green Concrete or Asphalt over Concrete 12" x .375
specification use this formula: 14" x .125
Blade type A, G or AC, (spec #) (grade) optional wear protection) M 14" x .140
A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete 14" x .187
Example: A606TRM or AC62SWSPQM 14" x .250
Low HP = 18 HP or lower 14" x .375
High HP = 20 HP or higher 16" x .125
16" x .140
18" x .125
18" x .140
18" x .155
18" x .175
18" x .187
18" x .250
20" x .125
20" x .140
20" x .155
20” x .165
24" x .155
24" x .175
24" x .187
26" x .155
26" x .187
30" x .175
30" x .187
32" x .187
36" x .175
36" x .187
To ensure maximum SOFT MED. SOFT MEDIUM MED. HARD HARD
performance, water is
required to cool these PRO BLUE Cutting Asphalt with Low HP Saw Specifications
blades during the
cutting process. A635T A615T A606T A605T A350HT
PRO BLUE Cutting Asphalt with High HP Saw Specifications
For use on
walk behind saws. A665T A635T A630T A606T A605T
PRO BLUE Cutting Green Concrete with Low HP Saw Specifications
G670T G660T G606T G606T G605T
PRO BLUE Cutting Green Concrete with High HP Saw Specifications
If you need a price for something not G670T G660T G606T G606T G605T
shown, please call customer service at PRO BLUE Cutting Asphalt Over Concrete with Low HP Saw Specifications
(800) 321-5336. AC64DWT AC64DWT AC64DWT AC62DWT AC62DWT
PRO BLUE Cutting Asphalt Over Concrete with High HP Saw Specifications
AC64DWT AC64DWT AC64DWT AC62DWT AC62DWT
See page 10 for color coded aggregate map of the U.S. and Canada
26
ASPHALT GREEN ASPHALT OVER
CONCRETE
SUPER PREMIUM SILVERCONCRETE
ASPHALT/GREEN/OVERLAY BLADES
SUPER PREMIUM Super Premium Silver-SP ASPHALT/GREEN/OVERLAY Blades
SILVER ASPHALT/GREEN • .375” Diamond Depth
• A high quality long life blade.
CONCRETE/ • Made with high diamond concentration.
ASPHALT OVER CONCRETE • Especially well suited for sawing in tough applications.
WET BLADES See page 12 for undercut protection options
SIZE 1” arbor with drive pin hole standard.
Custom arbor sizes/types are available.
12" x .125 When ordering, please specify arbor size/type if different from 1”.
12" x .140 * Additional blade sizes available upon request.
12" x .187
14" x .125 When determining an Asphalt, Green Concrete or Asphalt over Concrete
14" x .140 specification use this formula:
14" x .187 Blade type A, G or AC, (spec #) (grade) optional wear protection) M
14" x .250 A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete
14" x .375 Example: A606TRM or AC62SWSPQM
16" x .125 Low HP = 18 HP or lower
16" x .140 High HP = 20 HP or higher
18" x .125
18" x .140
18" x .155
18" x .175
18" x .187
18" x .250
20" x .125
20" x .140
20" x .155
20” x .165
24" x .155
24" x .187
26" x .155
26" x .187
30" x .175
30" x .187
36" x .187
SOFT MED. SOFT MEDIUM MED. HARD HARD For use on To ensure maximum
walk behind saws. performance, water is
SP SILVER Cutting Asphalt with Low HP Saw Specifications required to cool these
blades during the
A635SP A615SP A606SP A605SP A350SP cutting process.
SP SILVER Cutting Asphalt with High HP Saw Specifications If you need a price for something not
shown, please call customer service at
A665SP A635SP A630SP A606SP A605SP
(800) 321-5336.
SP SILVER Cutting Green Concrete with Low HP Saw Specifications
G670SP G660SP G606SP G606SP G605SP
SP SILVER Cutting Green Concrete with High HP Saw Specifications
G670SP G660SP G606SP G606SP G605SP
SP SILVER Cutting Asphalt Over Concrete with Low HP Saw Specifications
AC64DWSP AC64DWSP AC64DWSP AC62DWSP AC62DWSP
SP SILVER Cutting Asphalt Over Concrete with High HP Saw Specifications
AC64DWSP AC64DWSP AC64DWSP AC62DWSP AC62DWSP
See page 10 for color coded aggregate map of the U.S. and Canada
27
WALL SAW & HAND SAW BLADES
REINFORCED GENERAL PURPOSE
CONCRETE CONCRETE
HARD AGGREGATE BRICK & BLOCK
40mm 9mm 20mm 16mm
Straight Segment Split Segment Split Segment Split Segment
M -9 -20 -16
• Give less resistance for faster and more • This ‘horseshoe’ shaped design provides
• Original segment for standard cutting • For fast cutting and enhanced
blade life economical cutting. faster cutting speeds and long life and
and long life
• Keeps segments cooler in higher also helps reduce segment loss
steel applications.
Our hand saw blades have multiple unique segment designs to choose • Not available on U-Gullet Core
from ensuring top performance, speed and life when cutting. All hand
saw blades 20” and larger come standard with a 1” arbor and a LYFC When creating a specification for hand saw blades, use this formula:
bolt pattern. Other flush cut configurations are available upon request. W (spec) (grade) -20, -16, -9 or M (Example: W535P-20)
Blades are available in diameters from 1” to 24”. Custom sizes are When ordering 40mm blades add M to end of part number: (WP24187M)
available upon request. When ordering 20mm blades add MM to end of part number. (WP24187MM)
When ordering 16mm blades add M16 to end of part number. (WP24187M16)
When ordering 9mm blades add M9 to end of part number (WP16187M9)
Bond Specification Chart
Material Sandwich Non-Sandwich
Fast cutting hard aggregate W212 W20
General purpose hard aggregate W323 W2033
Fast cutting and long life W3A3 W33
WALL & HAND SAW Blades Fast cutting general purpose W434 W3342 U-GULLET CORE STYLE
Fast cutting general purpose-extended life in --- W41 • Holds side clearances better
heavy steel and hard aggregate • Cuts faster due to less surface to surface contact
• Removes slurry more efficiently
General purpose medium aggregate W535 W42 • Just order your normal blade(s) and add a ‘U’ to the end of the
Long life general purpose W545 part number or bond specification
• Not available in 20mm Split Segment Style
Long life soft aggregate, brick & block W5A5 W50
Diamond Depths Sandwich Seg Wall Saw Blades
• Faster cutting-blades maintain better clearance for their full life
Quality Grade 40mm 20mm 16mm 9mm
and better tracking in the cut
To ensure maximum Premium .250 .310 .310 .310 • Longer life-sandwich segs help keep blades that are 75%
performance, water Black (P) .310 .375 .375 .375
is required to cool Professional .375 .437 .450 .450 worn in use by preventing breakdown due to binding and lack
these blades during Blue (T) of side clearance
the cutting process. Super Premium
Silver (SP) High Diamond
Concentration
For use on Low Diamond
wall saws or Concentration
hydraulic hand
28
saws
HYDRAULIC HAND SAW BLADES
20MM
40MM PREMIUM BLACK
Size
14" x .125
14" x .140
16" x .125
16" x .140
18" x .125
18" x .187
18" x .210
18" x .220
18" x .250
20" x .125
20" x .140
20” x .155
20” x .165
20" x .187
20" x .210
20-5/8” x .125
20-5/8” x .140
24” x .140
9MM 16MM HAND SAW Blades
PRO BLUE SUPER PREMIUM SILVER
Size Size
14" x .125 14" x .125
14" x .140 14" x .140
16" x .125 16" x .125
16" x .140 16" x .140
18" x .125 18" x .125
18" x .187 18" x .187
18" x .210 18" x .210
18" x .220 18" x .220
18" x .250 18" x .250
20" x .125 20" x .125
20" x .140 20" x .140
20” x .155 20” x .155
20” x .165 20” x .165
20" x .187 20" x .187
20" x .210 20" x .210
20-5/8” x .125 20-5/8” x .125
20-5/8” x .140 20-5/8” x .140
24” x .140 24” x .140
29
WALL SAW BLADES
WALL SAW Blades PREMIUM BLACK PRO BLUE SUPER PREMIUM SILVER
Size Size Size
18" x .125 18" x .125 18" x .125
18" x .187 18" x .187 18" x .187
18" x .210 18" x .210 18" x .210
18" x .220 18" x .220 18" x .220
18" x .250 18" x .250 18" x .250
20" x .125 20" x .125 20" x .125
20" x .140 20" x .140 20" x .140
20” x .155 20” x .155 20” x .155
20” x .165 20” x .165 20” x .165
20" x .187 20" x .187 20" x .187
20" x .210 20" x .210 20" x .210
20-5/8” x .125 20-5/8” x .125 20-5/8” x .125
20-5/8” x .140 20-5/8” x .140 20-5/8” x .140
24” x .140 24” x .140 24” x .140
24" x .187 24" x .187 24" x .187
24" x .210 24" x .210 24" x .210
24" x .220 24" x .220 24" x .220
24" x .250 24" x .250 24" x .250
26" x .187 26" x .187 26" x .187
26" x .210 26" x .210 26" x .210
30" x .175 30" x .175 30" x .175
30" x .187 30" x .187 30" x .187
30" x .210 30" x .210 30" x .210
30" x .220 30" x .220 30" x .220
30" x .250 30" x .250 30" x .250
32" x .175 32" x .175 32" x .175
32" x .187 32" x .187 32" x .187
32" x .210 32" x .210 32" x .210
36" x .175 36" x .175 36" x .175
36" x .187 36" x .187 36" x .187
36" x .210 36" x .210 36" x .210
36" x .220 36" x .220 36" x .220
36" x .250 36" x .250 36" x .250
42" x .187 42" x .187 42" x .187
42" x .210 42" x .210 42" x .210
42" x .250 42" x .250 42" x .250
48" x .210 48" x .210 48" x .210
48" x .250 48" x .250 48" x .250
54" x .210 54" x .210 54" x .210
54" x .250 54" x .250 54" x .250
60" x .220 60" x .220 60" x .220
72" x .220 72" x .220
When creating a specification for hand saw blades, use this formula:
W (spec) (grade) -20, -16, -9 or M (Example: W535P-20)
When ordering 40mm blades add M to end of part number: (WP24187M)
When ordering 20mm blades add MM to end of part number. (WP24187MM)
When ordering 16mm blades add M16 to end of part number. (WP24187M16)
When ordering 9mm blades add M9 to end of part number (WP16187M9)
U-Gullet core is not available for 20mm blades.
U-Gullet core is available for 40mm blades upon request.
To ensure maximum performance,
water is required to cool these
blades during the cutting process.
30
WALL SAW BLADES
Bond Specification Chart
Material Sandwich Non-Sandwich
Fast cutting hard aggregate W212 W20
General purpose hard aggregate W323 W2033
Fast cutting and long life W3A3 W33
Fast cutting general purpose W434 W3342
Fast cutting general purpose-extended --- W41
life in heavy steel and hard aggregate W42
General purpose medium aggregate W535
Long life general purpose W545 ---
Long life soft aggregate, brick & block W5A5 W50
To ensure maximum WALL SAW Blades
performance, water
is required to cool
these blades during
the cutting process.
31
CRACK SAW & LOOP BLADES
Random Crack Saw Blades
• Random Crack Saw Blades are used to prepare random cracks for resealing
with joint sealant material
Available Quality Grades:
Heavy Duty Orange (H) (.250” diamond depth)
Premium Black (P) (.275” diamond depth)
RANDOM CRACK SAW BLADES
SIZE* H.D. Premium Black (P) Part #
Orange (H)Part #
5" x .250 CCH05250 CCP05250
5" x .375 CCH05375 CCP05375
5" x .500 CCH05500 CCP05500
6” x .250 CCH06250 CCP06250
6" x .375 CCH06375 CCP06375
6" x .500 CCH06500 CCP06500
7" x .250 CCH07250 CCP07250
Random Crack Saw Blade 7" x .375 CCH07375 CCP07375
Specifications 7" x .500 CCH07500 CCP07500
Aggregate Type Green Concrete Cured 8" x .250 CCH08250 CCP08250
Concrete
Hard to Medium Hard G64DW C56 8" x .375 CCH08375 CCP08375
Soft G606DW C60 8" x .500 CCH08500 CCP08500
All crack saw blades can be either laser welded or silver brazed upon request. Undercut protection may be added to any random crack saw blade.
* Additional blade sizes are available upon request.
CRACK SAW & LOOP Blades Traffic Loop Blades
Disc style core for use on competition style loop saws. Uses asphalt or concrete
wet blade specifications-give us your application and we’ll determine the blade
for you. Used for cutting wide joints for laying electric wire to activate traffic
signals.
Typical grades include:
Premium Black (P) (.275” diamond depth)
Professional Blue (T) (.310” diamond depth)
TRAFFIC LOOP BLADES
SIZE Premium Black (P) Pro Blue (T) Part #
Part #
14" x .375 CLP14375 CLT14375
LOOP BLADE PROFILE VIEW 18" x .375 CLP18375
To ensure maximum performance, water
is required to cool these blades during the
cutting process.
32
BEVEL & REFRACTORY BLADES
Bevel Blades
• Bevel wet blades are used in pairs with each blade having a 45 degree angle
giving the user a 90 degree bevel in the cut.
• Blades must be ordered in pairs
• Bevel blades can be redressed to maintain chamfer for angle
• Diamond depth varies based on quality grade, thickness and angle thickness
SIZE BEVEL BLADES Premium Part #
8" x .250 H.D. Part # CP08250MBVL
12" x .250 CP12250MBVL
12” x .500 CH08250MBVL CP12500MBVL
CH12250MBVL
CH12500MBVL
Bevel Blade Additional blade sizes are available
Specifications upon request.
Prices are per single blade.
Aggregate Type Specification
Available Quality Grades:
Hard C56 Heavy Duty Orange (H)
Premium Black (P)
Medium Hard C60
(Spacers sold separately)
Soft C64
Refractory Blades
• Long Lasting, Fast Cutting in a Wide Range of Refractory Materials.
Available high concentration quality grades: BEVEL & REFRACTORY Blades
Heavy Duty Orange (H) (.295” diamond depth)
Premium Black (P) (.250” diamond depth)
Supreme Silver (U) (.250” diamond depth)
REFRACTORY BLADES
1” arbor with drive pin hole is standard. SIZE H.D. Premium Black (P) Supreme Silver (U)
Custom arbor sizes/types available upon Orange (H)Part # Part # Part #
request. When ordering, please specify arbor 12" x .110
size/type. Additional blade sizes available 12" x .125 RH12110M RP12110M RU12110M
14" x .110 RH12125M RP12125M RU12125M
upon request. 14" x .125 RH14110M RP14110M RU14110M
16" x .125 RH14125M RP14125M RU14125M
Refractory materials are used 18" x .125 RH16125M RP16125M RU16125M
in linings for furnaces, kilns, 20" x .125 RH18125M RP18125M RU18125M
RH20125M RP20125M RU20125M
incinerators and reactors.
Refractory Blade Specifications
To ensure maximum performance,
water is required to cool these blades Material/Abrasive Level Specification
during the cutting process.
High alumina, hard materials, fast cutting R92
Medium duty fire brick, fast cutting R95
General purpose, insulating brick, ladle brick R98
Long life for silicon carbide & other abrasive materials R99
33
JOINT WIDENING & CHAMFER BLADES
Joint Widening & Cleaning
• Widen control joints in green concrete or old sealed joints in cured concrete.
• Used in pairs with spacers, which allow the desired joint width to be maintained by flipping the
blades inside out as the side gauge wears on the outside edge
• Spacers used between joint blades are made specifically for your machine and application
JOINT WIDENING BLADES
SIZE H.D. Premium Part # Pro Blue
Part # Part #
12" x .187 AH12187M AP12187M AT12187M
12" x .220 AH12220M AP12220M AT12220M
12" x .250 AH12250M AP12250M AT12250M
14" x .187 AH14187M AP14187M AT14187M
14" x .250 AH14250M AP14250M AT14250M
Available Quality Grades: Joint Widening & Cleaning Specifications
Heavy Duty Orange (H) (.250” depth)
Premium Black (P) (.275” depth) Aggregate Type Specification * Additional blade sizes
Professional Blue (T) (.310” depth) are available upon
Hard-Average Abrasive G62DW request.
*Ninja blades must be used in pairs. Prices
listed are for single blades. Spacers are Hard-High Abrasive G64DW
required for Ninja blades. Please call the
factory for customized spacers. Med Hard-Average Abrasive G605DW
Soft-High Abrasive G606DW
Ninja Joint Cleaning Blades
Used in pairs for fast, aggressive removal of sealants and compressibles in existing control joints while
cutting joint face into smooth surface for resealing.
See Joint Widening Specifications for Bonds.
Available Quality Grades:
Heavy Duty Orange (H) (.250” diamond depth)
Premium Black (P) (.275” diamond depth)
Professional Blue (T) (.310” diamond depth)
NINJA JOINT CLEANING BLADES
SIZE H.D. Part # Premium Part # Pro Blue
Part #
12" x .187 CNH12187M CNP12187M CNT12187M
12" x .220 CNH12220M CNP12220M CNT12220M
12" x .250 CNH12250M CNP12250M CNT12250M
14" x.187 CNH14187M CNP14187M CNT14187M
JOINT WIDENING Blades 14" x .220 CNH14220M CNP14220M CNT14220M
14" x .250 CNH14250M CNP14250M CNT14250M
These are typical blades sizes. Custom sizes may be available.
Spacers are used between Ninja blades and are made specifically for your machine and
application. (Spacers sold separately.)
Chamfer Grinding Blade
• 45 degree angled segments on thick disc for chamfer cuts for angle applications in concrete
• Can be used in pairs
• Special Premium grade diamonds for long life
• For use on wall saws or walk behind saws
CHAMFER SPECIAL GRINDING BLADE
Size Part # Cat # Description
12” x .250” x 1” CP12250CHF15 04094 Premium with 1.575” long, 45 degree
segments
12” x .250” x 1” CP12250CHF1 41198 Premium with 1” long, 45 degree
segments
For use on walk For use on wall or 12” x .250 x 1” CP12250CHF1527 57392 Premium with 1” long, 27 degree
behind saws. hydraulic hand saws. segments
34
RING SAW BLADES
Dragon Claw Ring Saw Blades
• For use ONLY with the Dragon Ring Saw
• Special 16mm split segments for fast cutting and slurry removal
• Use with water only
• 12” cutting depth with 16” blade
• 16” cutting depth with 20” blade
Wear plate is included with
Dragon Claw blades
See Dragon Saw operator’s manual for replacement
frequency and instructions.
Replacement Wear Plate:
Part #-6061184, Cat # 86515
Dragon Claw Ring HEAVY DUTY ORANGE WET DRAGON
Blades Specs CLAW RING BLADES WITH WEAR PLATE
Extremely Hard Aggregate with SIZE C41HM-16 C42HM-16 CRSDR18HM-16 CRSDR20HM-16
CRSDR18HM-16 Heavy Steel (specificly designed for CAT # CAT # CAT # CAT #
electric and gas Dragon saws) 12” x .155 - - 69664 77770
16” x .155 29301 93866 61775 38330
CRSDR20HM-16 Very Hard Aggregate 20” x .155 29303 93865 61781 16362
C41HM-16 Hard Aggregate
C42HM-16 Wear plate is included with each Dragon Claw Ring blade
Hard to Medium Hard Aggregate
REINFORCED HARD AGGREGATE
CONCRETE
Wet Ring Saw Blades
• Available with or without drive wheel
• Custom wet bond specifications available
• Offers a 10” cutting depth
• Use for pre-cutting or following chain cutting
• For use on competition-style ring saws
WET RING SAW BLADES
SIZE CAT # Specification
NOTE: These blades DO NOT 14” x .165 90666 C42HM RING SAW Blades
fit the Dragon Ring Saw 14” x .165 92209 C50HM
14” x .165 90021 C51WHM
Ring Saw Blades Specs 14” x .165 92527 G50HM
14” x .235 91403 C42WHM
C42HM Very Hard Aggregate 14” x .235 91404 C51WHM
14” x .165 91495* C42HM
C42WHM Very Hard Aggregate with High Steel 14” x .165 92666* C50HM
14” x .165 90134* C51WHM
C50HM Hard Aggregate 14” x .165 54864* G50HM
14” x .235 92576* C42WHM
C51WHM Medium Hard Aggregate with Moderate Steel 14” x .235 91057* C51WHM
G50HM Green Concrete with Hard Aggregate
To ensure maximum performance, * Denotes blades that include drive wheel.
water is required to cool these
blades during the cutting process.
35
DIAMOND WIRE REINFORCED
CONCRETE
Diamond Beaded Wire
For use on all Core Cut wire saws for cutting reinforced concrete, masonry stone and metals. Available with rubber injected and plastic
coated versions in Premium and Supreme grades.
BSG3 (Sharpened) - Electroplated Ultra Grade for Reinforced Concrete - 46 beads per meter
BSG3 - Electroplated Ultra Grade for Reinforced Concrete - 40 beads per meter
WS3C -Sintered Diamond Super Grade for Reinforced Concrete - 40 bead per meter
WV3B - Vacuum Brazed Ultra Grade for Reinforced Concrete 40 beads per meter
DWHP2S - Electroplated Super Grade for Steel - 46 beads per meter - Used on higher HP machines
BRW - Electroplated Super Grade - Wider Cut in Reinforced Concrete - 40 beads per meter
Diamond Beaded Wire
Bead Size / Description Color/Coating Concentration Diamond Grade Specification Part # Cat #
48781
10.2mm x 6mm Electroplated Wire Black/Rubber High Ultra BSG3 WRD10.2EP3S 28154
(ideal for heavily reinforced concrete) High Ultra (sharpened) SWRD10EP3 84547
Very High Super WRD1165PR 79498
10mm x 6mm Electroplated Wire Clear/Rubber BSG3 34118
(sharpened) 02205
11mm x 6.5mm Sintered Wire Black/Rubber
WS3C
10.2mm x 5.5mm Orange/Rubber Very High Ultra WV3B WRD10255PR
Vacuum Brazed Wire High Super DWHP2S WR1150URS
10.5mm x 5mm Electroplated Wire Yellow/Rubber
(For Steel Only)
DIAMOND Wire
15mm x 5.5mm Electroplated Wire Black/Rubber High Super BRW WR1555R
To ensure maximum performance,
water is required to cool wire during
the cutting process.
36
DIAMOND WIRE ACCESSORIES
HT45 Crimping Tool Jaws Screw
(Set of 2 pieces) Measures: Connectors
1.100” wide x .365” thick x .830 high
HT45 Hydraulic Crimping Tool Hand Crimping Tool
Makes it easy to repair or connect diamond wire
Wire and Bead Accessories
Description Part # Cat # DIAMOND WIRE Accessories
Threaded Crimps 7mm X 20mm - Use HT45 Crimp Jaws P/N 1400297 1900296 82513
Smooth Barrel 5/16" Wire Connector - Use HT45 Crimp Jaws P/N 1400521 1900183 00162
1400180 51176
Screw Connectors - Use HT45 Crimp Jaws 1400297 1400178 48176
Swivel Connectors - Use HT45 Crimp Jaws 1400297 & Swivel Crimp Tool 860404 724037 87592
86404 67966
Swivel Crimp Pin Only - Extra Pins for Swivel Connectors P/N 1400178 148130 75678
Swivel Crimp Tool - For removing pin in swivel connector 1400177 74910
Punch Replacement for Swivel Crimp Tool 1400174 68408
1400297 72310
3/8" Connector (Short Version) - Use HT45 Crimp Jaw 1400297 1400521 42848
Hydraulic Crimping Tool Model HT45 (Comes with 1 set of jaws P/N 1400297) 1900074 00160
396110 47413
Crimping Jaws (Dye) for use with HT45 (See above for compatible crimps) 1900073 00159
Crimping Jaws (Dye) for use with HT45 (See above for compatible crimps) 2501663 84927
3400896 73031
Hand Crimping Tool (No special jaws required) 3400895 73030
4 1/2" X .040 X 7/8" Cut-Off Wheel For Cutting Diamond Wire (4 use on 4 1/2" Angle Grinder) 3404027 73394
3402034 68223
C-12 Hand Held Wire Cutter 3402035 68224
Rubber Lining for WS25 32" Wire Drive Wheel (2501663) 6075128 21504
6020035 02583
8" Idler Pulley (3400896) Works with P/N 73030 below 6020025 02581
Idler Pulley Stand (3400895) Works with P/N 73031 above 6020004 02569
6020002 02567
Universal Transition Pulley 6020003 02568
Plunge Wire Saw Pulley Assembly - Left Side (Need to have minimum 10" diameter hole) 6020000 02565
Plunge Wire Saw Pulley Assembly - Right Side (Need to have minimum 10" diameter hole) 2900164 01293
Wire Saw 7 Wheel 90 Degree Bracket
10" Plastic Idler Wheel Assembly
16" Plastic Idler Wheel Assembly
Universal Tee for Plastic Idler Wheels (Needs 2 Flange Bolts for Mounting Not Included)
Universal Knuckle for Plastic Idler Wheels (Needs 4 Flange Bolts for Mounting Not Included)
Wire Saw Clamp for Plastic Idler Wheels (Needs 3 Flange Bolts for Mounting Not Included)
Pipe Mounting Base for Plastic Idler Wheels (Needs 4 Flange Bolts for Mounting Not Included)
Flange Bolts for Plastic Idler Wheel Accessories Listed Above
37
DRY BLADES
38
HIGH SPEED BLADE SPECIFICATIONS
Application Delux Star Standard Imperial X-Tra Heavy
Cut Blue Plus Duty
Quality # Gold Purple Red Orange
Reinforced Concrete 1 2 MAXX
H7D H7B 3 4 5
Hard Aggregate H7S H7I H7X 6
Concrete H7D H7B
Concrete H7S H7I H7X H7H
Asphalt H8D H8B
H10D H10B H8S H8I H8X H7H
Green Concrete H10D H10B H10S H10I H10X
Brick & Block H10D H10B H10S H10I H10X H8H
H10S H10I H10X H10H
H10H
H10H
SMALL DIAMETER BLADE SPECIFICATIONS
Application Delux Star Standard X-Tra Heavy Premium
Cut Blue Duty Black
Quality # Gold Plus Red Orange
Reinforced Concrete 1 2 6
E2D E2B 3 4 5 E2P
Hard Aggregate E2S E2X E2H
Concrete E2D E2B E2P
Concrete E2S E2X E2H
Asphalt E2D E2B E2P
E5D E5B E2S E2X E2H E5P
Green Concrete E5D E5B E5S E5X E5H E5P
Brick & Block E5D E5B E5S E5X E5H E5P
E5S E5X E5H
MASONRY BLADE SPECIFICATIONS
Application Delux Cut Star Blue Standard Heavy Premium
Gold Duty Black
Quality # 1 2 Orange
DM80B DM80B 3 6
Hard Materials, Hard DM80S 5 DM80P
Brick DM85D DM85B
DM86D DM86B DM85S DM80H DM85P
Concrete Combo Brick/ DM87D DM87B DM86S DM86P
Block DM87S DM85H DM87P
Combo Brick/Block DM86H
DM87H
Abrasive Brick/Block
BLADE BUSHINGS
Description Part # Cat #
00099
7/8” outside diameter x 5/8” inside diameter x .045 thickness 1700001 00102
00104
7/8” outside diameter x 5/8” inside diameter x .125 thickness 1700004 00106
00109
7/8” outside diameter x 20 MM inside diameter x .125 thickness 1700005 00110
00111
1” outside diameter x 20 MM inside diameter x .070 thickness 1700007 00113
00116
1” outside diameter x 7/8” inside diameter x .070 thickness 1700009 00129
46799
1-3/8” outside diameter x 1” inside diameter x .110 thickness 1700010
50326
1” outside diameter x 5/8” inside diameter x .070 thickness 1700011
DIAMOND outside diameter x 5/8” inside diameter x .045 thickness 1700013
1” outside diameter x 20 MM inside diameter x .375 thickness 1700020
1” outside diameter x 7/8” inside diameter x .375 thickness 1700043
1" outside diameter x 20MM inside diameter x .250 thickness 1700122
1" outside diameter x 20MM inside diameter x .200 thickness 1700134
* for FastCut saws
39
HIGH SPEED BLADES
Application Delux Star Standard Imperial X-Tra HD
Cut Blue Plus Orange
Quality Level Gold Purple Red MAXX
Reinforced Concrete 1 2
Hard Aggregate Concrete H7D H7B 3 4 5 6
H7D H7B H7S H7I
Concrete H8D H8B H7S H7I H7X H7H
Asphalt H10D H10B H8S H8I
Green Concrete H10D H10B H10S H10I H7X H7H
Brick & Block H10D H10B H10S H10I
H10S H10I H8X H8H
H10X H10H
H10X H10H
H10X H10H
Diamond Depth: Diamond Depth: Diamond Depth:
.440” (11mm) .375” (10mm) .395” (10mm)
Segment Height: Segment Height: Segment Height:
.540” (14mm) .475” (12mm) .470” (12mm)
Delux-Cut Star Blue Standard Gold
• Basic quality diamond and economical cutting • Good quality diamond and good cutting value • Better quality diamond and better cutting
value value
• Sintered segment
H8D H8B H7S
SIZE
SIZE CAT # SIZE CAT # 12” x .110 x UNV CAT #
14” x .125 x UNV 57706
10” x .110 x 1” 22856 10” x .110 x 1” 17710 16” x .125 x UNV 57719
18” x .125 x 1” 91674
12” x .110 x 1” 70495 12” x .110 x UNV 92398 20” x .125 x 1” 16868
28271
14” x .125 x 1” 70499 14” x .125 x UNV 85261 H8S
12” x .110 x UNV 57707
16” x .125 x 1” 20926 16” x .125 x UNV 21424 14” x .125 x UNV 57720
16” x .125 x UNV 92873
H8D 5-Packs 18” x .125 x 1” 63599 16868
18 x .125 x 1”
12” x .110 x 1” 01795 H8B 5-Packs H10S 57708
57721
14” x .125 x 1” 01796 12” x .110 x UNV 95054 12” x .110 x UNV 91767
14” x .125 x UNV 14395
H8D 10-Packs 14” x .125 x UNV 95055 16” x .125 x UNV 13846
12” x .110 x 1” 17560 H10B 18” x .125 x 1”
20” x .125 x 1”
14” x .125 x 1” 17580 12” x .125 x 1” 03048
H10D 14” x .125 x 1” 14355
12” x .110 x 1” 50526 16” x .125 x UNV 21217
HIGH SPEED Blades 14” x .125 x 1” 50537 H10B 5-Packs
16” x .125 x 1” 50545 12” x .125 x 1” 36841
H10D 5-Packs 14” x .125 x 1” 15889
12” x .110 x 1” 50563
14” x .125 x 1” 50595 UNV = 1” to 20mm universal knockout arbor
1” arbor blades include a 20mm bushing
REINFORCED HARD AGGREGATE GENERAL PURPOSE ASPHALT GREEN BRICK & BLOCK
CONCRETE CONCRETE CONCRETE
H7 H8 H10
SPECIFICATIONS: H7 Insert Quality Grade Here - Reinforced concrete and hard materials
H8 Insert Quality Grade Here - General concrete
H10 Insert Quality Grade Here - Asphalt, green concrete, brick and block
40
HIGH SPEED BLADES
High Speed Blades have various life Heavy Duty Orange MAXX includes cuts in the segments
expectancies depending on quality grade. The higher quality that give this long life blade an extra speed boost.
diamonds last longer and give maximum performance.
Diamond Depth: Diamond Depth: Diamond Depth:
.394” (10mm) .250” (6mm) .295” (7mm)
Segment Height: Segment Height: Segment Height:
.494” (13mm) .350” (9mm) .395” (10mm)
Imperial Purple X-tra Plus Red Heavy Duty Orange
• Better quality diamond and very good cutting life • Higher quality diamond and long cutting life
• Very high quality diamond and longer cutting life
H8I H7X H7H
SIZE CAT # SIZE CAT # SIZE CAT #
12” x .110 x UNV 85149 10” x .110 x 1” 11762 10” x .110 x 1” 11421
14” x .125 x UNV 78976
16” x .125 x UNV 96480 12” x .110 x UNV 53710 12” x .110 x UNV 53729
34504
18” x .125 x 1” 29041 12” x .125 x UNV 53717 12” x .125 x UNV 53733
20” x .140 x 1”
14” x .110 x UNV 53721 14” x .110 x UNV 53737
14” x .125 x UNV 53725 14” x .125 x UNV 53741
14” x .235 x 1” 11546
H10I 16” x .125 x UNV 75606 16” x .125 x UNV 91045
12” x .110 x UNV 15376 18” x .125 x 1” 15713 18” x .125 x 1” 11555
14” x .125 x UNV 15379 20” x .125 x 1” 11802 20” x .125 x 1” 11560
H8X H8H
16” x .125 x UNV 15381 10” x .110 x 1” 11763 10” x .110 x 1” 11422
18” x .125 x 1” 39209
20” x .140 x 1” 35259 12” x .110 x UNV 53714 12” x .110 x UNV 53730
12” x .125 x UNV 53718 12” x .125 x UNV 53734
14” x .110 x UNV 53722 14” x .110 x UNV 53738 HIGH SPEED Blades
14” x .125 x UNV 53726 14” x .125 x UNV 53742
Dry blades are cooled with 14” x .235 x 1” 11547
air by using intermittent
16” x .125 x UNV 89386 16” x .125 x UNV 90185
cutting. Dry blades can be
used with water. 18” x .125 x 1” 11799 18” x .125 x 1” 11556
20” x .125 x 1” 15137 20” x .125 x 1” 11561
H10X H10H
10” x .110 x 1” 11761 10” x .110 x 1” 11418
12” x .110 x UNV 53715 12” x .110 x UNV 53731
12” x .125 x UNV 53719 12” x .125 x UNV 53735
14” x .110 x UNV 53723 14” x .110 x UNV 53739
14” x .125 x UNV 53727 14” x .125 x UNV 53743
14” x .235 x 1” 28280
16” x .125 x UNV 76291 16” x .125 x UNV 89971
For use on high speed, masonry 18” x .125 x 1” 11798 18” x .125 x 1” 14231
and low HP walk behind saws
20” x .125 x 1” 11801 20” x .125 x 1” 11558
41
ULTIMATE HIGH SPEED BLADES
ULTIMATE CORES:
Wide gullets offer less surface-to-surface contact
for an even faster cut.
Diamond Depth: Diamond Depth: Diamond Depth:
.250” (6mm) .295” (7mm) .433” (11mm)
Segment Height: Segment Height: Segment Height:
.350” (9mm) .395” (10mm) .533” (14mm)
X-Tra Plus Red Heavy Duty Cut-ALL Multi-
Ultimate Orange Ultimate Purpose Ultimate
• Higher quality diamond and long cutting life • Very high quality diamond and longer • Very high quality diamond and longer cutting life
cutting life • Great for the general contractor that requires
a faster cut to get the job done quickly
H7XU H7HU H8CAU
SIZE CAT # SIZE CAT # SIZE CAT #
12” x .125 x UNV 73928 12” x .125 x UNV 21922
ULTIMATE HIGH SPEED Blades 12” x .125 x UNV 78765 14” x .125 x UNV 74413 14” x .125 x UNV 21927
16” x .125 x UNV 73192 16” x .125 x UNV 21928
14” x .125 x UNV 78766
16” x .125 x UNV 78767
H8XU H8HU
12” x .125 x UNV 66306 12” x .125 x UNV 66309
14” x .125 x UNV 66307 14” x .125 x UNV 66310
16” x .125 x UNV 66308 16” x .125 x UNV 66311 For use on high speed, masonry and
low HP walk behind saws
H10XU H10HU
12” x .125 x UNV 78768 12” x .125 x UNV 68680
14” x .125 x UNV 78769 14” x .125 x UNV 70172 UNV = 1” to 20mm universal knockout arbor
16” x .125 x UNV 78764 1” arbor blades include a 20mm bushing
16” x .125 x UNV 78770
REINFORCED HARD AGGREGATE GENERAL PURPOSE ASPHALT GREEN BRICK & BLOCK
CONCRETE CONCRETE CONCRETE
H7 H8 H10
SPECIFICATIONS:
H7 Insert Quality Grade Here - Reinforced concrete and hard materials
H8 Insert Quality Grade Here - General concrete
H8CAU - Multi-Purpose and best suited for harder materials
H10 Insert Quality Grade Here - Asphalt, green concrete, brick and block
42
HIGH SPEED SPECIALTY BLADES
Cut-ALL SPLIT SEGMENTS: A2Z VACUUM BONDED:
Offers fast cutting in multiple materials. The -16mm split segment allows less Diamond bonded to the core for full blade life
surface-to-surface contact and faster cutting.
Diamond Depth: Diamond Depth:
.354” (9mm) .310” (8mm)
Segment Height: Segment Height:
.454” (12mm) .410” (10mm)
Cut-ALL Multi-Purpose Blades A2Z Vacuum Bonded
• Great for the general contractor or landscaper whose job is different everyday. • Vacuum bonded technology-diamonds are adhered
to the core landing
• Split segment removes slurry more efficiently for faster and more economical cutting.
• Great for rescue and emergency situations
• Cuts a wide range of materials
• Holes in the core landing help with cooling while
cutting metal and other heat generating materials
Heavy Duty Cut-ALL Imperial Purple A2Z Vacuum Bonded
Multi-Purpose Cut-ALL Multi-Purpose
SIZE T7AZ Cat #
4” x .080 x 7/8” 44795 HIGH SPEED SPECIALTY Blades
SIZE H8CA Cat # SIZE H8ICA Cat # 4-1/2” x .080 x 7/8” 21511
12” x .125 x UNV 84967 12” x .125 x UNV 15372 6” x .090 x 7/8” 13565
14” x .125 x UNV 84968 14” x .125 x UNV 15373 7” x .095 x 7/8” 21531
16” x .125 x UNV 15375
16” x .125 x UNV 84969 9” x .125 x 7/8” 18751
18” x .125 x 1” 86709 12” x .125 x 1” 21535
20” x .125 x 1” 84970 The Cut-ALL Split Segment 14” x .125 x 1” 21571
Creates a Larger Weld
16” x .125 x 1” 21576
Surface, Offering Double
20 x .140 x 1” 86633 the Weld Strength Than 18” x .145 x 1” 69187
Cut-ALL Multi-Purpose 5-Packs Conventional Split 20” x .155 x 1” 69190
Segment Blades
12” x .125 x UNV 84989 7/8” arbor blades include 5/8” bushing
UNV = 1” and 20 mm universal arbor. High speed 1” arbor blades include 20mm heavy duty bushing
14” x .125 x UNV 84990 blades have a drive pin hole for use on small low
HP walk behind saws
Diamond blades are cooled with air
by using intermittent cutting. Blades
can be used with water.
SPECIFICATIONS: H8CA
H8ICA
T7AZ
REINFORCED GENERAL PURPOSE ASPHALT HARD AGGREGATE BRICK & BLOCK GREEN PAVERS STONE METAL DUCTILE IRON
CONCRETE CONCRETE CONCRETE
Metal & Ductile for A2Z
43
HIGH SPEED TURBO BLADES
TURBO:
Turbo blades offer a faster cut than segmented
blades due to the serrated segment design,
allowing less surface-to-surface contact.
Diamond Depth: Diamond Depth: Diamond Depth:
.400” (10mm) .370” (9mm) .187” (5mm)
Segment Height: Segment Height: Segment Height:
.500” (13mm) .470” (12mm) .287” (7mm)
DELUX-CUT STAR BLUE STANDARD GOLD
Basic quality diamond and Good quality diamond and good cutting value Better quality diamond and better cutting value
economical cutting value
SIZE T7S Cat #
SIZE T7B Cat #
4” x .080 x 7/8” 12480
SIZE T7D Cat #
4” x .080 x 7/8” 74959 4-1/2” x .080 x 7/8” 12483
4” x .080 x 7/8” 21124 4-1/2” x .080 x 7/8” 74960 5” x .080 x 7/8” 12486
HIGH SPEED TURBO Blades 4-1/2” x .080 x 7/8” 21134 5” x .080 x 7/8” 80002 6” x .080 x 7/8” 12487
5” x .080 x 7/8” 21139 6” x .080 x 7/8” 80003 7” x .095 x 7/8” 12489
6” x .080 x 7/8” 21141 7” x .095 x ♦7/8” 74961 8” x .095 x 7/8” 12493
7” x .095 x ♦7/8” 21163 8” x .095 x 7/8” 80004 9” x .095 x 7/8” 12494
8” x .095 x ♦7/8” 21183 9” x .095 x 7/8” 80005 10” x .110 x 1” 12495
9” x .095 x ♦7/8” 21203 10” x .110 x 1” 80006 12” x .125 x UNV 58454
10” x .110 x 1” 21204 12” x .125 x 1” 74962 14” x .125 x UNV 58455
12” x .125 x 1” 21205 14” x .125 x 1” 74964 16” x .125 x 1” 14527
14” x .125 x 1” 21212 Star Blue 5-Packs Standard Gold 5-Packs
Delux-Cut 5-Packs 4” x .080 x 7/8” 76589 4” x .080 x 7/8” 55237
4” x .080 x 7/8” 21242 4-1/2” x .080 x 7/8” 76590 4-1/2” x .080 x 7/8” 55238
4-1/2” x .080 x 7/8” 21288 7” x .095 x ♦7/8” 76591 7” x .095 x 7/8” 55239
5” x .080 x 7/8” 21289 12” x .125 x 1” 84981
6” x .080 x 7/8” 21308 14” x .125 x 1” 84983
7” x .095 x ♦7/8” 21318
12” x .125 x 1” 21220 GENERAL PURPOSE
CONCRETE
14” x .125 x 1” 21229
For use on electric circular saws, high speed saws UNV = 1” and 20 mm universal knockout arbor T7D
masonry saws and right angle grinders. 4” through 10” blades include 5/8” bushing T7B
♦ = diamond shaped arbor T7S
44
HIGH SPEED TURBO BLADES
IMPERIAL TURBO: T-SEG TURBO:
Imperial Purple Turbo features continuous rim turbo Premium T-Seg blades have multiple speed creating
segment plus turbo core protection segments for long features: gullets, turbo segment and T-Segs for wear
protection. These factors give a extra-fast cut and long
life cutting.
life expectancy.
Diamond Depth: Diamond Depth: EXTREME
.354” (9mm) .220” (6mm) LIFE
Segment Height: Segment Height:
.454” (12mm) .320” (8mm)
IMPERIAL PURPLE HEAVY DUTY ORANGE PREMIUM T-SEG
Better quality diamond and very good cutting life Very high quality diamond and longer cutting life Turbo Blades
General purpose cutting in
SIZE T7I Cat # SIZE T7H Cat #
concrete and masonry
4” x .080 x 7/8” 12281
12” x .125 x 1” 79952
14” X .125 X 1” 79953 4-1/2” x .080 x 7/8” 12286 SIZE TS7P Cat #
Imperial Purple 5-Packs 5” x .080 x 7/8” 12290 4” x .070 x 7/8” 73958 HIGH SPEED TURBO Blades
4-1/2” x .070 x 7/8” 73959
12” x .125 x 1” 84987 6” x .080 x 7/8” 12292 73960
5” x .075 x 7/8 73961
14” X .125 X 1” 84988 7” x .095 x 7/8” 12298 6” x .080 x 7/8” 73962
7” x .090 x 7/8” 73964
• T7I blades have a built-in wear 8” x .095 x 7/8” 12309 8” x .095 x 7/8” 73965
protection to extend the life of the blade 9” x .095 x 7/8” 73966
9” x .095 x 7/8” 12312 10” x .095 x 7/8” 74610
12” x .125 x 1” 74612
10” x .110 x 1” 12315 14” x .125 x 1”
12” x .125 x UNV 53862
14” x .125 x UNV 53863
16” x .125 x 1” 12336
16” x .125 x 20mm 28824
20” x .140 x 1” 12338
Heavy Duty Orange 5-Packs
4” x .080 x 7/8” 55240 Blades 7” and above come with a 7/8” bushing
(removable) in a diamond arbor
4-1/2” x .080 x 7/8” 55241
7” x .095 x 7/8” 55242
GENERAL PURPOSE GENERAL PURPOSE BRICK & BLOCK
CONCRETE CONCRETE
T7I Turbo blades are cooled with UNV = 1” and 20 mm universal knockout arbor
T7H air by using intermittent cutting. 1” arbor blades include 20mm bushing
Turbo blades can be used with 4” through 10” blades include 5/8” bushing
TS7P water.
45
X-LINE TURBO BLADES
X-TURBO XL-TURBO XXXL-TURBO
Turbo and straight segments Turbo and slant segments Turbo, straight and slant segments
Diamond Depth: Diamond Depth: Diamond Depth:
.275” (7mm) .354” (9mm) .433” (11mm)
X-TURBO Blade XL-TURBO Blade XXXL-TURBO Blade
• Three different segments for longer life,
• Unique turbo core with enhanced air holes • Unique turbo core with even more air holes
faster cutting and reliable performance
to keep the blade cool at high speeds to keep the blade cool at higher speeds • General purpose, super fast cutting
• Serrated turbo segment for the fastest cut
• General purpose, super fast cutting in • General purpose, super fast cutting • Extended blade life with slant segment
multiple applications • Better quality and blade cutting life wear protection and tall segments
• Includes a full radius drop segment for
enhanced blade life.
X-LINE TURBO Blades X-TURBO Blades XL-TURBO Blades XXXL Turbo Blades
SIZE T7X Cat # SIZE T7XL Cat # SIZE T7XL3 Cat #
12” x .125 x 1” 63754 12” x .125 x 1” 19311 12” x .125 x 1” 42890
14” x .125 x 1” 63760 14” x .125 x 1” 42891
14” x .125 x 1” 19312 16” x .125 x 1” 42892
14” x .125 x 20mm 70864 16” x .125 x 1” 20161 18” x .125 x 1” 60247
16” x .125 x 1” 63763 20” x .125 x 1” 20183 20” x .125 x 1” 42893
20” x .125 x 1” 63764 24” x .140 x 1” 63105
All X-Line blade Include 20mm bushing
REINFORCED GENERAL PURPOSE ASPHALT GREEN
CONCRETE CONCRETE CONCRETE
Turbo blades are cooled with Blades 12” & 14” used on high T7X, T7XL, T7XL3
air by using intermittent cutting. speed, masonry, circular, tile and
Turbo blades can be used with
block saws
water.
46
H.P. TURBO BLADES
HIGH PERFORMANCE TURBO:
• Segmented core with serrated turbo-style diamond segments
allow a faster cut due to less surface-to-surface contact
• Faster cutting than traditional continuous rim turbo blades
Diamond Depth: Diamond Depth: Diamond Depth:
.187” (4.75mm) .370” (9mm) .220” (5.6mm)
Star Blue Standard Gold H.D. Orange H.P. Turbo
H.P. Turbo H.P. Turbo • Very high quality for very fast cutting in general
• Good quality diamond and good cutting value
• Better quality diamond and better cutting value purpose hard materials, pavers, hard brick/block
• Very fast cutting and stone
• Very fast cutting • Longer blade life
• Basic blade life
• Better blade life
STAR BLUE STANDARD GOLD H.D. ORANGE H.P. Turbo
H.P. Turbo H.P. Turbo
SIZE HPT7B Cat # SIZE HPT7S Cat # SIZE HPT5H Cat # HPT7H Cat #
4” x .080 x 7/8” 87986 4” x .080 x 7/8” 23909 11637
4-1/2” x .080 x 7/8” 88004
7” x .095 x ♦ 7/8” 88020 4” x .080 x 7/8” 11703 4-1/2” x .080 x 7/8” 25669 11639
88053
12” x .125 x 1” 88056 4-1/2” x .080 x 7/8” 11704 5” x .080 x 7/8” 42803 11641
14” x .125 x 1” 88060 5” x .080 x 7/8” 28247
20” x .140 x 1” 6” x .080 x 7/8” 94460 11642 HIGH SPEED SPECIALTY Blades
♦ = diamond shaped arbor
6” x .080 x 7/8” 19906 7” x .095 x 7/8” 35586 11643
7” x .095 x 7/8” 11705
8” x .095 x 7/8” 16777 11645
8” x .095 x 7/8” 11707 9” x .095 x 7/8” 16776 11646
9” x .095 x 7/8” 22322
10” x .110 x 1” 26574 11648
10” x .110 x 1” 11708 12” x .125 x UNV 59995 58210
12” x .125 x UNV 58452 14” x .125 x UNV 59890 58451
14” x .125 x UNV 58453 16” x .125 x UNV 29711 33372
16” x .125 x 1” 28654 18” x .125 x 1” 71056 11677
18” x .125 x 1” 14072 20” x .125 x 1” 56521 37682
20” x .140 x 1” 11715 20” x .140 x 1” 24198 11678
24” x .125 x 1” 09723 24” x .140 x 1” 27664 76645
24” x .140 x 1” 34336 Heavy Duty Orange H.P. 5-Packs
Turbo blades are Standard Gold 5-Packs 4” x .080 x 7/8” --- 57940
cooled with air by using
4” x .080 x 7/8” 57939 4-1/2” x .080 x 7/8” --- 57942
intermittent cutting.
Turbo blades can be 4-1/2” x .080 x 7/8” 57941 7” x .095 x 7/8” --- 57944
7” x .095 x 7/8” 57943
used with water.
UNV = 1” and 20 mm universal knockout arbor
1” arbor blades come with 20mm bushing
GENERAL PURPOSE REINFORCED GENERAL PURPOSE
CONCRETE CONCRETE CONCRETE
Blades 4” to 10” Blades 4”, 4-1/2” Blades 12” & 14” used on high HPT7B HPT5H HPT7H
used on circular saws & 7” used on right speed and masonry saws HPT7S
angle grinders
47
SPECIALTY TURBO BLADES
G.O. Grain Organized GRAVITON™ Turbo GRAVITON PLUS™ Turbo
Standard straight segment and a turbo slant segment for Wavy core enhances cutting speed
fast cutting while protecting the core Wavy core enhances cutting speed
Continuous rim turbo style for a smooth Continuous rim turbo style for a smooth cut.
cut Air holes in the core allow cooling at high
speeds to prolong cutting life.
Diamond Depth:
.433” (11mm)
GRAIN ORGANIZED Graviton Turbo Graviton Plus™ Turbo
G.O. LONGER Slant segment extends cutting life • Wavy core enhances cutting speed • Wavy core enhances cutting speed
G.O. FASTER Turbo segment maximizes cutting
performance
G.O. GRAIN ORGANIZED Organized
diamonds in the segments provide a constant cutting edge
SPECIALTY TURBO Blades G.O. Grain Organized GRAVITON™ GRAVITON™ PLUS
High Speed Turbo Blades
Turbo Blades Turbo Blades Longer
Good Cutting Life Cutting Life
SIZE Cat # SIZE T7GR SIZE T7GR+
12” x .125 x 1 81528 Cat # Cat #
14” x .125 x 1 81321
16” x .125 x 1 81530 4” x .085 x 7/8” 57328 4” x .095 x 7/8” 57335
4-1/2” x .085 x 7/8” 57379 4-1/2” x .100 x 7/8” 57347
7” x .085 x 7/8” 57332 7” x .110 x 7/8” 57351
GENERAL PURPOSE SPECIFICATION
CONCRETE
H8GO - Long life, fast
cutting in general purpose HARD AGGREGATE REINFORCED GENERAL PURPOSE BRICK & BLOCK
concrete CONCRETE CONCRETE
H8GO
ASPHALT PAVERS GREEN STONE
CONCRETE
Close-Up of
Organized
Diamonds in the
Segment
T7GR, T7GR+
48
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Master Catalog 2023
Discover the best professional documents and content resources in AnyFlip Document Base.
Search