SPECIALTY BLADES
Carbide ‘Chunks’ TURBO FIBER CEMENT BOARD Canadian Pricing
• Designed for stacked sheet cutting of fiber cement board
DEMO-CUT • Continuous-rim turbo segments for fast cutting
• Air holes in the core to keep the blade cool during dry cutting
• Carbide-tipped for metals, roofing and building materials, wood, tar,
fire doors, plastic and rubber. Not suitable for concrete.
• Made with .250” thick carbide chunks that allow extremely fast cutting
that will not bind or load (an important factor in rescue cutting).
DEMO-CUT Rescue Blades TURBO FIBER
Cement Board Blades
SIZE Cat # List Price
SIZE T7FB Cat # List Price
7” x .250 x 5/8” 04613 $529
12” x .250 x 1” 96301 727 4-1/2” x .080 x 7/8” ♦ 01078 $29
14” x .250 x 1” 96302 960 7” x .095 x 7/8” ♦ 80353 54
16” x .250 x 1” 26491 1,159 ♦ = diamond shaped arbor with 5/8” bushing
METAL DUCTILE IRON FIBER BOARD SPECIFICATION
T7FB - Long life, fast cutting in fiber SPECIALTY Blades
cement board (also known as Hardy
Board)
*Warning: When sawing, dust and material particles will be common
as this product is very aggressive. Wear protective safety equipment when
using and handling this blade. Blade edges are very sharp. Do not exceed
saw manufacturer recommended RPM. Periodic inspections are required
to insure proper condition. Never use damaged or cracked blades. Please
consult warning sheet provided with blade.
49
SMALL DIAMETER BLADES
SMALL DIAMETER BLADES
• 4” to 9” diameter blades for hand-held machines
• Great for general concrete or asphalt
Canadian Pricing
Diamond Depth: Diamond Depth: Diamond Depth:
.315” (8mm) .315” (8mm) .187” (5mm)
Segment Height: Segment Height: Segment Height:
.394” (10mm) .433” (11mm) .287” (7mm)
DELUX-CUT STAR BLUE STANDARD GOLD
Basic quality diamond Good quality diamond and good cutting value Better quality diamond and better cutting value
and economical cutting value E2B List E2S E5S List
Cat # Price Cat # Cat # Price
SIZE E2D List SIZE 74950 $25 SIZE
Cat # Price 4” x .070 x 7/8”
4” x .080 x 7/8” 20966 $21 4” x .070 x 7/8” 11344 11346 $69
4-1/2” x .080 x 7/8” 21002 24 4-1/2” x .070 x 7/8” 74951 30 4-1/2” x .070 x 7/8” 11347 11349 81
5” x .080 x 7/8” 22729 33 5” x .080 x 7/8” 70461 46 5” x .080 x 7/8” 11350 11351 90
6” x .080 x 7/8” 22783 46 6” x .080 x 7/8” 70470 55 6” x .080 x 7/8” 11352 16866 117
7” x .080 x 7/8” 22785 51 7” x .080 x 7/8” 74952 62 7” x .080 x 7/8” 11355 11357 120
8” x .080 x 7/8” 22802 58 8” x .080 x 7/8” 74953 70 8” x .080 x 7/8” 11359 11360 136
9” x .080 x 7/8” 22820 65 9” x .080 x 7/8” 70494 81 9” x .095 x 7/8” 95049 95050 161
Delux-Cut 10-Packs Star Blue 10-Packs Standard Gold 5-Packs
SMALL DIAMETER Blades 4” x .080 x 7/8” 21003 $195 4” x .070 x 7/8” 42196 $244 4” x .070 x 7/8” 57953 55256 $327
4-1/2” x .080 x 7/8” 21016 224 4-1/2” x .070 x 7/8” 42201 286 4-1/2” x .070 x 7/8” 57954 55258 387
7” x .080 x 7/8” 57955 55260 573
GENERAL PURPOSE ASPHALT
CONCRETE
E2D E5S Diamond blades are cooled For use on electric circular
E2B E5X with air by using intermittent saws and side grinders
E2S E5H cutting. Blades can be used
E2X E5P
E2H with water.
E2P
5500
SMALL DIAMETER BLADES
SMALL DIAMETER BLADES
• Laser-welded segments for reliable cutting
• Dry blades that can be used with water
Canadian Pricing
Diamond Depth: Diamond Depth: Diamond Depth:
.220” (6mm) .315” (8mm) .220” (6mm)
Segment Height: Segment Height: Segment Height:
.315” (8mm) .433” (11mm) .315” (8mm)
X-TRA PLUS RED HEAVY DUTY ORANGE PREMIUM BLACK
Higher quality diamond and long cutting life Very high quality diamond and longer cutting life Highest quality diamond and longest cutting life
SIZE E2X E5X List SIZE E2H E5H List SIZE E2P E5P List
Cat # Cat # Price Cat # Cat # Price Cat # Cat # Price
4” x .070 x 7/8” 11366 11368 $99 4” x .070 x 7/8” 11242 11244 $131 4” x .070 x 7/8” 11304 11305 $157
4-1/2” x .070 x 7/8” 11370 11373 128 4-1/2” x .070 x 7/8” 11249 11253 160 4-1/2” x .070 x 7/8” 11307 11308 185
5” x .080 x 7/8” 11374 11375 131 5” x .080 x 7/8” 11257 11259 162 5” x .080 x 7/8” 11310 11311 190
6” x .080 x 7/8” 11378 11379 168 6” x .080 x 7/8” 11263 11264 201 6” x .080 x 7/8” 11315 11316 263
7” x .080 x 7/8” 11380 11381 174 7” x .080 x 7/8” 11268 11274 210 7” x .080 x 7/8” 11319 11322 280
8” x .080 x 7/8” 11383 11386 206 8” x .080 x 7/8” 11290 11293 239 8” x .080 x 7/8” 11338 11339 331
9” x .080 x 7/8” 11387 11388 269 9” x .080 x 7/8” 11297 11302 355 9” x .080 x 7/8” 11340 11342 432
Heavy Duty Orange 5-Packs Premium Black 5-Packs
X-tra Plus Red 5-Packs SMALL DIAMETER Blades
4” x .070 x 7/8” 55261 55262 $474 4” x .070 x 7/8” 55267 55268 $626 4” x .070 x 7/8” 55274 55275 $752
4-1/2” x .070 x 7/8” 55263 55264 614 4-1/2” x .070 x 7/8” 55270 55271 766 4-1/2” x .070 x 7/8” 55276 55277 880
7” x .080 x 7/8” 55265 55266 833 7” x .080 x 7/8” 55272 55273 1,007 7” x .080 x 7/8” 55278 55279 1,338
Use Drawing # 52162 when ordering blades FLUSH CUT HUB ADAPTER FOR
for flush cut hub adapter. SMALL DIAMETER BLADES
Used for cutting flush with a small
diameter blade on a side grinder
· The Flush Cut Hub fits any standard 5/8”-11 spindle
Blades must be ordered special with flush cut 4-bolt pattern in order
to work with the hub adapter.
Part # 4400600, Cat # 53323 -List Price: $98
4-bolt pattern with 5/8”-11 thread
51
Canadian Pricing DRY WALK BEHIND BLADES
DRY WALK BEHIND BLADES
• All dry walk behind blades include a drive pin hole
• For intermittent cuts without water for patch/repair work or
expansion joints
• Laser welded for dry cutting
Delux-Cut DA2D
features slant
segment wear
protection
DELUX-CUT STANDARD GOLD IMPERIAL PURPLE
Basic quality diamond and economical cutting Better quality diamond and better cutting value Better quality diamond and very good
value SIZE DC1S DA2S DG3S List cutting life
Cat # Cat # Cat # Price
SIZE DC1D DA2D List SIZE DC1I List
Cat # Cat # Price Cat # Price
12” x .125 x 1” 11208 11189 11219 $609
12” x .110 x 1” 89306 $639
12” x .125 x 1” 20806 20861 $219 12” x .187 x 1” 27278 14702 --- 858
14” x .125 x 1” 20825 20875 282 14” x .125 x 1” 73080 820
DRY WALK BEHIND Blades 14” x .125 x 1” 11210 11190 11222 791
STAR BLUE 14” x .187 x 1” 11211 11191 --- 1,155
Good quality diamond and good cutting value
18” x .125 x 1” 50004 50002 --- 1,158
SIZE DC1B DA2B List 20” x .125 x 1” 17457 14917 --- 1,164
Cat # Cat # Price
12” x .125 x 1” 70424 70412 $265
14” x .125 x 1” 70426 70422 343
18” x .125 x 1” 83679 83678 560
GENERAL PURPOSE ASPHALT GREEN
CONCRETE CONCRETE
For use on low horsepower DC1D DA2D DG3S
(< 20HP)walk behind saws DC1B DA2B
Dry blades are cooled with air DC1S DA2S
by using intermittent cutting. DC1I
Dry blades can be used with
water.
52
DRY WALK BEHIND BLADES Canadian Pricing
WIDE GULLETS TO KEEP THE
BLADE COOL.
125” Blades can be used on high speed saws
V-Gullets allow less
surface-to-surface contact
and helps keep the blade cool in
dry applications.
HEAVY DUTY ORANGE PREMIUM BLACK
Very high quality diamond and Longer blade life Highest quality diamond and Longest blade life
SIZE DC1H DA2H DG3H List Price SIZE DC1P DA2P DG3P List Price
Cat # Cat # Cat # Cat # Cat # Cat #
12” x .125 x 1” 11196 11156 11213 $814 12” x .125 x 1” 11204 11175 11217 $1,022
12” x .187 x 1” 11197 11158 50718 1,052 12” x .187 x 1” 11205 15954 24109 1,371
14” x .125 x 1” 11199 11162 11215 1,001 14” x .125 x 1” 11206 11178 11218 1,257
14” x .187 x 1” 11200 11170 19093 1,282 14” x .187 x 1” 11207 11183 77223 1,696 DRY WALK BEHIND Blades
16” x .125 x 1” 15499 15334 35322 1,255 16” x .125 x 1” 16585 63018 70883 1,387
16” x .187 x 1” 30677 46464 --- 1,534 16” x .187 x 1” 42715 --- --- 2,359
18” x .125 x 1” 11203 11174 44588 1,328 18” x .125 x 1” 14582 34477 25607 1,412
20” x .125 x 1” 60330 44475 --- 1,470 20” x .125 x 1” 55061 60631 --- 1,906
GENERAL PURPOSE ASPHALT GREEN
CONCRETE CONCRETE
For use on low DC1H DA2H DG3H
horsepower (< 20HP) DC1P DA2P DG3P
walk behind saws
• All dry walk behind blades include a drive pin hole
• For intermittent cuts without water for patch/repair
work or expansion joints
• Laser welded for dry cutting
53
MASONRY BLADES
Canadian Pricing
Diamond Depth: Diamond Depth: Diamond Depth:
.440” (11mm) .375” (10mm) .250” (6mm)
Segment Height: Segment Height: Segment Height:
.540” (14mm) .475” (12mm) .350” (9mm)
DELUX-CUT STAR BLUE STANDARD GOLD
Basic quality diamond and Good quality diamond and good Better quality diamond and better cutting value
economical cutting value
cutting value DM80S DM85S DM86S DM87S List
Cat # Cat # Cat # Cat # Price
SIZE DM85D List SIZE DM85B List SIZE
Cat # Price Cat # Price
10” x .110 x 1” 11947 11948 11949 11950 $473
12” x .110 x 1” 20887 $136 12” x .110 x 1” 70504 $152 12” x .110 x 1” 11952 11954 11955 11956 550
14” x .125 x 1” 20888 143 14” x .125 x 1” 70520 160 14” x .110 x 1” 11959 11961 11964 11965 622
18” x .125 x 1” 20908 425 18” x .125 x 1” 20649 467 14” x .125 x 1” 22087 18360 36413 30441 689
16” x .125 x 1” 76800 74823 76801 11968 793
20” x .125 x 1” 20924 546 20” x .125 x 1” 20651 623 18” x .125 x 1” 28288 11973 11974 20122 954
20” x .125 x 1” 11976 11977 11978 11979 1,067
24” x .140 x 1” 40793 40794 40795 40796 1,346
1” arbor blades come with 20mm bushing
MASONRY Blades Masonry Blade Specifications: BRICK & BLOCK For use on masonry
DM80-Hard materials, hard brick-fast cutting and block saws
DM85-General purpose, combo brick/block 54
DM86-Combo brick/block
DM87-Abrasive brick/block
*Not recommended for cutting reinforced concrete
Diamond blades are cooled with
air by using intermittent cutting.
Blades can be used with water.
MASONRY BLADES
Canadian Pricing
Diamond Depth: Diamond Depth:
.295” (7mm) .250” (6mm)
Segment Height: Segment Height:
.395” (10mm) .350” (9mm)
HEAVY DUTY ORANGE PREMIUM BLACK
Highest quality diamond and longest cutting life
Very high quality diamond and longer cutting life
SIZE DM80H DM85H DM86H DM87H List Price SIZE DM80P DM85P DM86P DM87P List Price
Cat # Cat # Cat # Cat # Cat # Cat # Cat # Cat #
10” x .110 x 1” 11817 11819 11820 11821 $544 10” x .110 x 1” 11904 11905 11906 11907 $619
12” x .110 x 1” 11825 11827 11828 11829 660 12” x .110 x 1” 11908 11909 11910 11911 706
14” x .110 x 1” 11847 11850 11853 11855 763 14” x .110 x 1” 11917 11920 11921 11922 890
14” x .125 x 1” 11859 11861 11862 11864 846 14” x .125 x 1” 22109 14644 11925 21993 987
16” x .125 x 1” 21697 11876 21421 46214 924 16” x .125 x 1” 11930 11931 38115 53034 1,218
18” x .125 x 1” 11879 11881 11883 11884 1,057 18” x .125 x 1” 18611 11935 11936 11937 1,233
20” x .125 x 1” 11893 11895 11897 11898 1,212 20” x .125 x 1” 11940 11942 11943 11944 1,519
24” x .140 x 1” 40797 40798 40799 40800 1,535 24” x .140 x 1” 40801 40802 40803 51752 1,728
HEAVY DUTY ORANGE Silent Core PREMIUM BLACK Silent Core
SIZE DM80HSC DM85HSC DM86HSC DM87HSC List SIZE DM80PSC DM85PSC DM86PSC DM87PSC List Price
Cat # Cat # Cat # Cat #
Cat # Cat # Cat # Cat # Price 14” x .125 x 1”
18” x .125 x 1”
14” x .125 x 1” 66587 66644 66648 66652 $989 20” x .140 x 1” 66640 66656 66660 66664 $1,181
18” x .125 x 1” 66637 66645 32040 66653 1,595 24” x .140 x 1”
20” x .140 x 1” 66638 66646 66650 66654 1,815 66641 66657 66661 66665 1,605
24” x .140 x 1” 66669 66647 66651 66655 2,194
66642 10099 66662 66666 1,866 MASONRY Blades
66643 66659 66663 66667 2,284
Masonry Blade Specifications: Silent Core Masonry Blade
DM80-Hard materials, hard brick-fast cutting Laser cut harmonic dampeners
DM85-General purpose, combo brick/block reduce vibration. Noise is reduced
DM86-Combo brick/block by -10dB
DM87-Abrasive brick/block Special laser anchor slots near the
*Not recommended for cutting reinforced concrete segments provide for increased
noise reduction and helps
BRICK & BLOCK in the prevention of core
cracking
For use on masonry and block saws
55
TUCK POINT BLADES
Canadian Pricing Diamond Depth: Diamond Depth: Diamond Depth:
.250” (6mm) .250” (6mm) .187” (5mm)
Segment Height: Segment Height: Segment Height:
.350” (9mm) .350” (9mm) .287” (7mm)
DELUX-CUT STAR BLUE STANDARD GOLD
Basic quality diamond and Good quality diamond and Better quality diamond and better cutting value
economical cutting value
good cutting value SIZE DT9S Cat # List Price
SIZE DT9D List Price SIZE DT9B Cat # List Price 4” x .250 x 7/8” 12462 $256
Cat #
4” x .250 x 7/8” 21065 $78 4” x .250 x 7/8” 74966 $98 4-1/2” x .250 x 7/8” 12466 275
4-1/2” x .250 x 7/8” 86 103
21072 201 4-1/2” x .250 x 7/8” 74967 129 5” x .250 x 7/8” 12470 286
7” x .250 x 7/8” 249
21074 5” x .250 x 7/8” 51438 7” x .250 x 7/8” 12475 407
Delux-Cut 5-Packs 7” x .250 x 7/8” 74968 8” x .250 x 7/8” 12476 609
Star Blue 5-Packs Standard Gold 5-Packs
4” x .250 x 7/8” 21090 $370 4” x .250 x 7/8” 76592 $469 4” x .250 x 7/8” 55225 $1,226
4-1/2” x .250 x 7/8” 21096 413 4-1/2” x .250 x 7/8” 76593 495 4-1/2” x .250 x 7/8” 55226 1,312
21108 957 76594 1,196 55227 1,951
7” x .250 x 7/8” 7” x .250 x 7/8” 7” x .250 x 7/8
Tuck Point Blades:
• Cleans, routs and repairs cracks in concrete and other materials
• Fast cutting while leaving a clean groove
Mulitple
Blades
In One
Diamond Depth: Diamond Depth:
.250” (6mm) .220” (6mm)
Segment Height: Segment Height:
.350” (9mm) .320” (8mm)
3-in-1
2-in-1
TUCK POINT Blades UTILITY GREEN STAR BLUE Multi-Blades HEAVY DUTY ORANGE
Very good quality diamond Good quality diamond and good cutting Very high quality diamond
value - 2-in-1 for faster cutting and longer cutting life
and good cutting value 3-in-1 for faster cutting and wider cut
2-in-1 for faster cutting SIZE DT9H Cat # List Price
3-in-1 for faster cutting and wider cut
SIZE DT9B Cat # List Price 4” x .250 x 7/8” 12418 $323
SIZE DT9G Cat # List Price
Star Blue 2-in-1 4-1/2” x .250 x 7/8” 12429 333
4” x .250 x 7/8” 94186 $125
4” x .250 x 7/8” 20790 $124 5” x .250 x 7/8” 12437 372
4-1/2” x .250 x 7/8” 94187 161
4-1/2” x .250 x 7/8” 22691 127 7” x .250 x 7/8” 12446 483
5” x .250 x 7/8” 96364 215
5” x .250 x 7/8” 07916 147 8” x .250 x 7/8” 12454 714
7” x .250 x 7/8” 25953 277
7” x .250 x 7/8” 51191 205 Heavy Duty Orange 5-Packs
Utility Green 2-in-1 Star Blue 3-in-1 4” x .250 x 7/8” 55228 $1,546
4” x .250 x 7/8” 31807 $133 4” x .375 x 7/8” 79892 $201 4-1/2” x .250 x 7/8” 55229 1,592
4-1/2” x .250 x 7/8” 20207 156 4-1/2” x .375 x 7/8” 79893 213 7” x .250 x 7/8 55230 2,317
Utility Green 3-in-1 BRICK & BLOCK
4” x .375 x 7/8” 94183 $276 DT9
4-1/2” x .375 x 7/8” 94184 286 For mortar joints
5” x .375 x 7/8” 94185 294 56 For use on electric circular saws
and side grinders
TUCK POINT & V-CRACK BLADES
Canadian Pricing
HEAVY DUTY ORANGE High DELUX-CUT V-Crack STAR BLUE V-Crack
Performance Basic quality diamond and Good quality diamond and good cutting value
economical cutting value
SIZE HPDT9H Cat # List Price SIZE V2B Cat # List Price
SIZE V2D Cat # List Price
4” x .250 x 7/8” 11697 $436 4” 21118 $321 4” 02739 $346
4-1/2” x .250 x 7/8” 11698 482 7” 21122 597 7” 02746 610
5” x .250 x 7/8” 11700 496 Delux-Cut V-Crack Turbo
7” x .250 x 7/8” 11702 Basic quality diamond and faster
8” x .250 x 7/8” 16638 764 cutting
825 4” 12636 $318
Heavy Duty Orange 5-Packs V-Crack Blades:
• Cleans, routs and repairs cracks in concrete and other materials
4” x .250 x 7/8” 55280 $2,091 • Fast cutting while leaving a clean groove
4-1/2” x .250 x 7/8” 55360 2,310
7” x .250 x 7/8 55361 3,668 • Segment design provides longer life
• Segment width .310 at the widest point
Heavy Duty Orange
High Performance:
• Very high quality diamond and longer cutting life
• Super-fast cutting due to less surface to surface contact
• For use on circular saws and right angle grinders
Staggered TUCK POINT & V-CRACK Blades
Segments for
Faster
Cutting
HEAVY DUTY ORANGE HEAVY DUTY ORANGE
V-Crack
Vertical Tuck Point Pins
Very high quality diamond and
Tuck Point blades can be fitted with a diamond longer cutting life SIZE VT2H List
Cat # Price
shaped arbor. Extra charge for diamond arbors SIZE V2H Cat # List Price
1/4” Diameter with 12524 $236
(tuck point blades) $16.00 4” 27542 $478 5/16” Shaft
7” 26719 752 3/8” Diameter with 12529 242
5/16” Shaft
7” 97808 888
BRICK & BLOCK diamond arbor 52501 767 1/4” Diameter with
1/4” Shaft
DT9 7” x 7/8” 93788 236
round arbor
For mortar joints 3/8” Diameter with 93789 242
Heavy Duty Orange 5-Packs 1/4” Shaft
4” 55223 $2,290 Vertical Tuck Point Pins
• Great for cleaning out mortar from hard to
7” 55224 3,609
reach joints and butt (vertical) joints
For use on right Note: 5/8”-11 • Grinds out butt joints in seconds without
angle grinders hub unless
otherwise noted damaging existing blocks
• For use on basic router machines
57
Your choice of 5/16” or 1/4” shafts.
DRY TILE BLADES
Canadian Pricing
DELUX-CUT STAR BLUE HEAVY DUTY ORANGE
• Basic quality diamond and economical • Good quality diamond and good cutting value • Very high quality diamond and longer
cutting value cutting life
DELUX-CUT Dry STAR BLUE Dry HEAVY DUTY ORANGE
Dry
TD2D List TD2B List
SIZE Cat # Price SIZE Cat # Price SIZE TD2H List
Cat # Price
*4” x .060 x 7/8” 20664 $28 *4” x .060 x 7/8” 80012 $34
*4” x .060 x 7/8” 12508 $115
*4-1/2” x .060 x 7/8” 20675 32 *5” x .060 x 7/8” 80013 51 *5” x .060 x 7/8” 12510 141
*5” x .060 x 7/8” 20681 45 **7” x .060 x 5/8” 80014 91 *6” x .060 x 7/8” 12512 154
*6” x .060 x 7/8” 20716 59 8” x .060 x 5/8” 80015 110 **7” x .060 x 5/8” 12515 178
9” x .060 x 1” 68467 115
**7” x .060 x 5/8” 20721 75 8” x .060 x 5/8” 12517 211
8” x .060 x 5/8” 20733 91 10” x .060 x 5/8” 80016 123 10” x .060 x 5/8” 12519 226
9” x .060 x 1” 68466 94
Star Blue 5-Packs Heavy Duty Orange 5-Packs
10” x .060 x 5/8” 20751 98 *4” x .060 x 7/8” 80017 $162 *4” x .060 x 7/8” 55221 $548
Delux-Cut 5-Packs
**7” x .060 x 5/8” 80018 434 **7” x .060 x 5/8” 55222 851
*4” x .060 x 7/8” 20768 $133
**7” x .060 x 5/8” 20769 356
DRY TILE Blades *Denotes 7/8” arbor with 5/8” bushing.
**Denotes diamond arbor with 5/8” (removable) bushing
1” arbor with removable 5/8” bushing
TILE
Tile Sharpening
Stone
For use on tile or circular TD2D Part # Cat # List Price
saws TD2B
TD2H
SS1000 48960 $106
58
WET TILE BLADES
Canadian Pricing
STANDARD GOLD HEAVY DUTY ORANGE PREMIUM BLACK
• Better quality diamond and better cutting value • Very high quality diamond and longer cutting life • Highest quality diamond and longest cutting life
STANDARD GOLD Wet HEAVY DUTY ORANGE PREMIUM BLACK Wet
TI7S TI10S List Wet TI7P TI10P List
Cat # Cat # Price Cat # Cat # Price
SIZE SIZE TI7H TI10H List SIZE
--- $58 Cat # Cat # Price
3-3/8” x .050 x 5/8” 45233 4” x .060 x 5/8” 58059 87709 $87 4” x .060 x 5/8” 12361 87717 $115
4” x .060 x 5/8 12374 87701 70 4-1/2” x .060 x 5/8” 87835 12343 92 6” x .060 x 5/8” 12362 87718 135
6” x .060 x 5/8” 12375 87702 87 4-1/2” x .060 x 20mm 96903 --- 92 7” x .060 x 5/8” 45553 87719 158
7” x .060 x 5/8” 45234 87703 94 6” x .060 x 5/8” 12346 87710 106 8” x .060 x 5/8” 12364 87720 174
7” x .060 x 5/8” 57855 87711 129
8” x .060 x 5/8” 12377 87704 112 8” x .060 x 5/8” 12352 87712 145 9” x .060 x 5/8” 87725 87721 199
9” x .060 x 5/8” 12355 87713 165
9” x .060 x 5/8” 45235 87705 127 10” x .060 x 5/8” 12359 87714 176 10” x .060 x 5/8” 12368 87722 220
12” x .080 x 1” 13512 87715 247
10” x .060 x 5/8” 12379 87706 143 14” x .080 x 1” 23838 87716 351 12” x .080 x 1” 12369 87723 358
12” x .080 x 1” 45236 87707 216 14” x .080 x 1” 12370 87724 417
14” x .080 x 1” 13522 87708 281
TILE TI7- Fast, smooth cut in HARD TILE TI10- Fast cutting in ceramic WET TILE Blades
granite, marble, glass, or fiberglass and other
TI7S porcelain and other TI10S soft, porous tiles.
TI7H hard, dense tiles. T10H
TI7P TI10P
For use on tile or
circular saws
59
SURFACE PREPARATION
PRODUCTS
Canadian Pricing
CP305 Hand Polisher CPG80E Low Profile Floor Grinder
Wet/Dry Polishing Pads CPG100 Single Head Floor Grinder
3-Step Polishing Pucks CPG200 Dual Head Floor Grinder
Metal Transition Pucks CORE LOCK Grinding Inserts
Arrow Segmented Cups HTC® Compatible Grinding Inserts
60
CP305 HAND POLISHER
Canadian Pricing
12” Grinding Width
SPECIFICATIONS
5” Pad Capacity Power Supply 115V/60Hz
Electric
Motor Power 2 HP
FEATURES
Amp Draw 11 amp, uses 20amp breaker
RPM 2500
Includes Slurry skirt, coolant feed
• Uses three 5” diamond polishing pads and/or diamond grinding discs One of three 5” grinding platens CC900TE & CC1000T Tile Saw
• Planetary, gear driven system (Velcro® surface)
• Powered by a heavy duty FEIN® variable speed motor
• Center coolant feed
• Precision bearings
• Heavy duty handles and body
• Built-in vacuum port
• Rugged, hand-operated 12” platform that grinds, hones and polishes
concrete surfaces
• Operates wet or dry (with optional dust cowl)
• 12” platform turns at a lower rate than the higher rotational speed
(>2000rpm) of the 5” platens
• The RPM provides the optimal speed for diamond polishing, producing a
perfect finish 5 times faster than a single head polisher
CP305 HAND POLISHER
Model # Motor Power Part # Cat # Pad Product List Price
DS305 Power Source Capacity Weight $6,129
(lbs.)
115 V, Electric 5801328 32947 5” x 3
11 amp 30
61
POLISHING PADS & PUCKS MAX
RPM:
Ultra-Smooth, High Sheen Finish! 4500
For Use on Most Standard Concrete
Polishing Machines
Canadian Pricing
Premium Wet Polishing Pads Premium Dry Polishing Pads
• Resin bonded pads for high sheen concrete polishing • Resin bonded pads for high sheen concrete polishing
• Ultra-smooth finish • Ultra-smooth finish
• High strength Velcro® back for worry-free finishing • High strength Velcro® back for worry-free finishing
4” PREMIUM WET POLISHING PADS 4” PREMIUM DRY POLISHING PADS
Grit Part # Cat # List Price Grit Part # Cat # List Price
50 DCP043050 50 DCPD0450
100 DCP0430100 68436 $38 100 DCPD04100 68509 $41
200 DCP0430200 68439 38 200 DCPD04200 68510 41
400 DCP0430400 68440 38 400 DCPD04400 68516 41
800 DCP0430800 68441 38 800 DCPD04800 68529 41
1500 DCP04301500 68442 38 1500 DCPD041500 68530 41
3000 DCP04303000 68480 38 3000 DCPD043000 68536 41
68487 38 68545 41
POLISHING Pads & Pucks 5” Premium Dry Polishing Pads 7” Premium Dry Polishing Pads
• Resin bonded pads for high sheen concrete polishing • Resin bonded pads for high sheen concrete polishing
• Ultra-smooth finish • Ultra-smooth finish
• High strength Velcro® back for worry-free finishing • High strength Velcro® back for worry-free finishing
5” PREMIUM DRY POLISHING PADS 7” PREMIUM DRY POLISHING PADS
Grit Part # Cat # List Price Grit Part # Cat # List Price
50 DCP053050 85165 $53 50 DCP073050 21901 $98
100 DCP0530100 85241 53 100 DCP0730100 21971 98
200 DCP0530200 85262 53 200 DCP0730200 22014 98
400 DCP0530400 85349 53 400 DCP0730400 22028 98
800 DCP0530800 85356 53 800 DCP0730800 22052 98
1500 DCP05301500 85362 53 1500 DCP07301500 22066 98
3000 DCP05303000 85378 53 3000 DCP07303000 22071 98
All polishing pads and pucks use the WET
Discount and are sold as single items.
62
POLISHING PADS & PUCKS
Canadian Pricing
Premium Wet Polishing Pads 3-Step Polishing Pucks Metal Transition
• Resin bonded pads for high sheen concrete
• Used in three phases for an extra Grinding Pucks
polishing shine • Good quality diamond for long life
• 3” for hand-held polishing machines
• High strength Velcro® back for worry-free • 3” for hand-held polishing machines grinding
• High strength Velcro® back for • Used for a smooth grind before polish
finishing • Available in two grits
worry-free finishing
3” X 10MM FLOOR
POLISHING PUCKS 3” (3-STEP) FLOOR 3” METAL FLOOR
Grit Part # Cat # List Price POLISHING PUCKS
GRINDING PUCKS
50 DCP031050 68657 $58
100 DCP0310100 68579 58 STEP Part # Cat # List Price Grit Part # Cat # List Price
200 DCP0310200 68762 58
400 DCP0310400 68763 58 #0 DCP03100 68934 $75 80 CGMP0380 69012 $125
800 DCP0310800 68863 58
1500 DCP03101500 68881 58 #1 DCP03101 68942 75 120 CGMP03120 69014 137
3000 DCP03103000 68911 58
#2 DCP03102 68951 75 All Polishing Pads
and Pucks use the
#3 DCP03103 68989 75 WET Discount
75
#3
Extra DCP03103X 69006
Shine
Backer Pads for Pads Core-Lock Adapter ARROW Segmented POLISHING Pads & Pucks
Cup Wheel
& Pucks • Adapts to our 8”, 10” and 12” grinding
• 5/8”-11 threaded hub plates for 3” polishing pads • Good quality diamond for long life grinding
• High-strength Velcro® back • Used for grinding concrete before polish
• High-strength Velcro® back and
with foam cushion for worry-free magnets with Core-Lock connection ARROW SEGMENTED
finishing and grinding FINISHING CUP WHEEL -
CORE-LOCK
BACKER PADS ADAPTER DRY
SIZE Part # T5A Cat# List Price
Size Part # Cat # List Price Part # Cat # List Price
4” x 5/8-11 CGA4000 64783 $145
4” BPV4000 75461 $13 DCP3000 101943 $123
5” x 5/8-11 CGA5000 65010 197
5” BPV5000 75462 16
7” x 5/8-11 CGA7000 65085 329
7” BPV7000 54543 32
ARROW Cup
Core Prep adapters use Grinders
the Wet Discount Use the DRY
Discount
63
CUP GRINDERS
Canadian Pricing
Single Row-S5D Double Row-D5D Single Row-S5B Double Row-D5B
• General grinding and
• General grinding and removal • General grinding and • General grinding and
removal with a smooth finish removal removal with a smooth
finish
DELUX-CUT Segmented STAR BLUE Segmented
Basic quality diamond and economical grinding value
Good quality diamond and good grinding value
SIZE/DESCRIPTION SPEC Cat # List Price SIZE/DESCRIPTION SPEC Cat # List Price
4” x 5/8-11 Single Row S5D 22405 $78 4” x 5/8-11 Single Row S5B 77383 $88
4-1/2” x 5/8-11 Single Row S5D 22406 88 4” x 7/8” Single Row S5B 63111 88
5” x 5/8-11 Single Row S5D 42539 100 4-1/2” x 5/8-11 Single Row S5B 77502 104
4-1/2” x 7/8” Single Row S5B 63114 104
7” x 5/8-11 Single Row S5D 22408 150 7” x 5/8-11 Single Row S5B 77542 162
7” x 7/8” Single Row S5D 38970 150 7” x 7/8” Single Row S5B 63116 162
4” x 5/8-11 Double Row D5D 22410 143 4” x 5/8-11 Double Row D5B 70360 148
4-1/2” x 5/8-11 Double Row D5D 22415 150 4” x 7/8” Double Row D5B 63117 148
5” x 5/8-11 Double Row D5D 42541 176 4-1/2” x 5/8-11 Double Row D5B 70387 162
7” x 5/8-11 Double Row D5D 22418 218 4-1/2” x 7/8” Double Row D5B 63119 162
7” x 7/8” Double Row D5D 38971 218 7” x 5/8-11 Double Row D5B 70391 215
7” x 7/8” Double Row D5B 63120 215
Double Row-D5G Cup Grinders
• General grinding and are Part of
the Core
removal with a smooth finish Prep Line of
Products
Single Row-S5G
• General grinding and removal
CUP Grinders UTILITY GREEN Segmented
Very good quality diamond and very good grinding value
SIZE/DESCRIPTION SPEC Cat # List Price
4” x 5/8-11 Single Row S5G 94177 $124
7” x 5/8-11 Single Row S5G 94178 234
4” x 5/8-11 Double Row D5G 94175 198 GENERAL PURPOSE
CONCRETE
4” x 7/8” Double Row D5G 06617 198
7” x 5/8-11 Double Row D5G 94176 323 For use on right
angle grinders
64
CUP GRINDERS
Canadian Pricing
Single Row-S5S Double Row-D5S Standard Gold Turbo Low Profile:
• General grinding &
• General grinding with smooth finish S33S2530
heavy removal • Heavy removal • Grinding Medium to Hard Concrete
• High quality diamond and better grinding value
STANDARD GOLD Segmented STANDARD GOLD Low Profile
Better quality diamond and better grinding value Size Segment Number of Cat # List Price
Type Segments
SIZE/DESCRIPTION SPEC Cat # Cat # List Price
(5/8”-11 hub) (7/8” hub) 5” x 5/8”-11 Single Row 7 84635 $302
4” Single Row S5S 07442 07446 $160 5” x 7/8” Single Row 7 48352 302
5” Single Row S5S 28508 07447 234 5” x 5/8”-11 Spiral Turbo 12 48359 371
7” Single Row S5S 07450 07451 279 5” x 7/8” Spiral Turbo 12 48389 371
4” Double Row D5S 07429 07430 263
5” Double Row D5S 07431 07432 322 Lower profile cups will fit on Bosch© grinders- A More Shallow
Cup Than The Basic Cup Grinders
7” x 5/8-11 Double Row D5S 07434 07436 359
Single Row = Basic grinding and removal
Spiral Turbo = Fast, heavy grinding and removal
Double Row-D5H
• General grinding with smooth finish
• Heavier removal
Single Row-S5H Heavy Duty Orange Turbo Low Profile:
• General grinding S33H2530
Grinding Medium to Hard Concrete
• Heavier removal Very high quality diamond and longer grinding life
HEAVY DUTY ORANGE Segmented HEAVY DUTY ORANGE
Low Profile
Very high quality diamond and longer life
SIZE/DESCRIPTION SPEC Cat # Cat # List Price Segment Number of
Type Segments
(5/8”-11 hub) (7/8” hub) Size Cat # List Price CUP Grinders
4” Single Row S5H 00015 07403 $239
5” Single Row S5H 07404 21112 304 5” x 5/8”-11 Single Row 7 84678 $354
7” Single Row S5H 00017 07412 430 5” x 7/8” Single Row 7 84692 354
4” Double Row D5H 00016 07369 359 5” x 5/8”-11 Spiral Turbo 12 84649 413
5” Double Row D5H 07370 07372 437 5” x 7/8” Spiral Turbo 12 84677 413
7” Double Row D5H 00018 07383 587 Standard Gold and Heavy Duty
Orange also available with
GENERAL PURPOSE special tall hubs
CONCRETE
For use on right
angle grinders
65
TURBO CUP GRINDERS
Canadian Pricing
Delux-Cut Star Blue
• Spiral turbo for a fast grind • Spiral turbo for a fast grind
DELUX-CUT Spiral Turbo STAR BLUE Spiral Turbo
General grinding and removal with Basic life General grinding and removal with Good life
SIZE T5D Cat# List Price SIZE T5B Cat # List Price
4” x 5/8-11 (10 seg) 22419 $82 4” x 5/8-11 (10 seg) 00036 $99
4-1/2” x 5/8-11(12 seg) 22435 92 4” x 7/8 (10 seg) 63135 99
5” x 5/8-11 (9 seg) 42544 99 4-1/2” x 5/8-11(12 seg) 90079 127
5” x 7/8 (9 seg) 55613 99 4-1/2’ x 7/8 (12 seg) 63136 127
7” x 5/8-11” (12 seg) 22474 147 5” x 5/8-11 (12 seg) 60853 169
7” x 7/8” (12 seg) 52140 147 5” x 7/8 (12 seg) 63140 169
7” x 5/8-11 (24 seg) 22453 210 7” x 5/8-11 (12 seg) 90193 189
7” x 7/8 (12 seg) 63137 189
7” x 5/8-11 (24 seg) 90359 209
7” x 7/8 (24 seg) 63139 209
TURBO CUP Grinders Utility Green Imperial
• Spiral turbo for a fast grind Purple
• Spiral turbo for a
faster grind
UTILITY GREEN Spiral Turbo IMPERIAL PURPLE Spiral Turbo
General grinding and removal with Good life Fast grinding and removal with Very Good life
SIZE T5G Cat # T5G Cat # List Price SIZE T5I CAT # List Price
(5/8”-11 hub) (7/8” hub)
4” x 5/8-11 (12 seg) 16074 $189
4” (9 seg) 94133 94134 $129 5” x 5/8-11 (16 seg) 60151 275
4” (18 seg) 94127 94128 186 7” x 5/8-11 (18 seg) 16076 359
4-1/2” (9 seg) 94131 94132 144
4-1/2” (18 seg) 94129 94130 201 GENERAL PURPOSE
CONCRETE
5” (14 seg) 09793 96471 207
7” (12 seg) 94135 94136 228
7” (24 seg) 94137 94138 335 For use on right
angle grinders
66
TURBO CUP GRINDERS
Canadian Pricing
Standard Gold Heavy Duty Orange
• General grinding and medium removal with better life • General grinding and heavy removal
• Spiral turbo for fast, aggressive grinding • Spiral turbo for fast, aggressive grinding
• Very high quality diamond and longer grinding life
STANDARD GOLD Spiral Turbo HEAVY DUTY ORANGE Spiral Turbo
SIZE T5S Cat # T5S Cat # List Price SIZE T5H Cat # T5H Cat # List Price
(with 5/8”-11 hub) (with 7/8” hub) (with 5/8”-11 hub) (with 7/8” hub)
4” (9 seg) 17846 23177 $206 4” (9 seg) 17943 20710 $215
5” (12 seg) 19678 76901 272
7” (12 seg) 16410 17834 296 5” (12 seg) 69357 78871 284
7” (24 seg) 15263 18641 440
7” (12 seg) 15095 18155 304
7” (24 seg) 15096 18396 446
Standard Gold and Heavy Duty Orange Also Available With Special Tall Hubs
Cup Grinders
are Part of
the Core
Prep Line of
Products
PCD Cup Heavy Duty Dry Ring Turbo TURBO CUP Grinders
Grinders • 3 bonds to fit your application
• Polycrystalline Diamond • Fine grit-smoothest finish
• Medium grit-basic grinding and removal
allows aggressive • Coarse grit-heavy aggressive removal
removal of glue/epoxy
and grout
PCD Cup Grinders
SIZE CAT # Application List Price HEAVY DUTY Dry Ring Turbo
4-1/2” x 5/8-11 14986 $466
General Purpose epoxy 581 SIZE GRIT BOND Cat # List Price
7” x 5/8-11 21715 removal
4” x 7/8” Fine KT5HF 35645 $236
General Purpose epoxy
removal 4” x 7/8” Medium KT5HM 26060 236
4” x 7/8” Coarse KT5HC 23329 236
EPOXY & GLUE GENERAL PURPOSE 4” x 5/8-11 Fine KT5HF 19546 236
CONCRETE
4” x 5/8-11 Medium KT5HM 17539 236
4” x 5/8-11 Coarse KT5HC 23051 236
For use on right 7” x 5/8-11 Coarse KT5HC 23154 424
angle grinders
PCD 7” x 7/8” Coarse KT5HC 31547 424
67
CPG80E LOW PROFILE FLOOR GRINDER
Canadian Pricing Website Product Powered By:
Page
8” Head Capacity
Electric
• 2 HP Baldor-1PH, 115V, 16 amp motor
• Remove paint, epoxy and rough spots
• Easy to maneuver push drive
• Slurry skirt keeps the machine on the grinding surface
• 2800 rpm grinding head speed
• Includes 50ft, 12 gauge extension cord
8” Heavy Duty Orange grinding
head included (Cat # 03330)
CPG80E Floor Grinder Low profile for hard to reach areas Adjustable rear axle and heavy duty steel frame
CPG80E SINGLE HEAD LOW PROFILE FLOOR GRINDER
Model # Engine/Motor Type Part # Cat # Head Product Weight List Price
Capacity (lbs.)
CPG82E1-8 2HP-1PH-*115V or 230V Baldor® Electric 5801037 13317 8” 120 $4,831
* Must specify 115V or 230V when ordering
68
CPG100 SINGLE HEAD FLOOR GRINDER
Grinds, Cleans, Levels,
and Smooths Bumps and
Uneven Areas Quickly
Powered By: Website Product Canadian Pricing
Page
Note: Electric grinders do
not ship with electric plug.
3-Phase powered grinders
do not include male electric
connector for control box.
10”/12” Head Capacity
Electric
Gasoline
• Remote throttle • Adjustable wheel location for added grinding strength
• 2” dust port opening • Single head for fast, aggressive grinding
• Single grease point • Greasing points are easily accessible
• Steel box frame • Electric models include starter box
• Adjustable operator handles • Includes 50 pound weight that maintains surface pressure
• Lifting handles
CPG100 Floor Grinder
CPG100 SINGLE HEAD FLOOR GRINDER
Model # Engine/Motor Engine/Motor Power Part # Cat # Head Product List Price
Make Power Source Capacity Weight (lbs)
CPG102E1
CPG110H Baldor® 2 HP-1PH, 115V or 230V Electric 5800727 13227 10”/12” 370 $5,977
CPG175E1
CPG175E3 Honda® GXV390 10.2 HP Gas 5800726 13420 10”/12” 320 7,104
CPG175E3
Baldor® 7.5 HP-1PH, 230V Electric 5800828 15040 10”/12” 355 8,961
Baldor® 7.5 HP-3PH, 230V Electric 5800829A 15048 10”/12” 370 8,522
Baldor® 7.5 HP-3PH, 460V Electric 5800829B 14123 10”/12” 370 8,532
NOTE: Floor Grinders comes with one 65lb weight ballast (except for Model # CPG102E1)
Optional Second weight 2501047 47017 --- 50 $503
69
CPG200 DUAL HEAD FLOOR GRINDER
Accommodates Both Diamond Grinding Powered By:
Heads, Grinding Blocks, and Grinding
Canadian Pricing Plates with Core-Lock
Website Product
Page
Includes 50 pound weight 10”/12” Head Capacity
that maintains surface Electric
pressure Gasoline
Note: Electric grinders do not ship with electric plug. FEATURES
3-Phase powered grinders do not include male electric
connector for control box • Remote throttle
• 2” dust port opening and water hose connection
• Multiple grease point
• Adjustable operator handles
• Multiple lifting handles and single lifting point
• Dual head allows large 24” grinding area with two 12” heads
• 4 rear axle positions and swivel axle
• Matches the height of the grinding head being used and
allows for rapid change in weight distribution during
grinding or transport
• Uses diamond grinding head, carbide blocks, grinding
stones, and Core-Lock
CPG200 Floor Grinder CPG200 DUAL HEAD FLOOR GRINDER
Model # Engine/Motor Make Engine/Motor Power Power Part # Cat # Head Product List Price
Source Capacity Weight (lbs)
CPG210H
CPG202E1 Honda® GXV390 10.2 HP Gas 5801238 42874 (2)10”/(2)12” 530 $12,107
CPG275E1
CPG275E1 Baldor® 2 HP-1PH, 115V or 230V* Electric 5801235 42765 (2)10”/(2)12” 390 11,097
CPG275E3
Baldor® 7.5 HP-1 PH, 230 Volt Electric 5801236 42793 (2)10”/(2)12” 524 14,014
Baldor® 7.5 HP-3 PH, 230 Volt Electric 5801237A 42802 (2)10”/(2)12” 560 13,576
Baldor® 7.5 HP-3 PH, 460 Volt Electric 5801237B 42827 (2)10”/(2)12” 560 13,576
NOTE: Each Floor Grinder comes with one 65 lb weight ballast (*excludes Model # CPG202E1)
Optional second weight 2501047 47017 --- --- $503
* Must specify 115V or 230V when ordering
Horsepower as rated by the engine manufacturer
70
CORE-LOCK SYSTEM
3-Slot
6-Slot
6-Slot Canadian Pricing
8” Grinding Plate 10” Grinding Plate 12” Grinding Plate
Fits Diamond Products’ CP80E Fits Diamond Products’ CP100 & Fits Diamond Products’ CP200 grinders
CC200, Target, Husqvarna® and
and Diteq® grinders
EDCO® grinders
For use on
floor grinding
machines.
Core-Lock diamond inserts are placed in CORE-LOCK System
the grinding plate, then tapped in for a
secure connection.
PLATES FOR CORE-LOCK
GRINDING INSERTS
Size Number of Inserts Part # Cat # List Price
8” 3 GP8000 05407 $450
10” 6 GP10000 05409 550
12” 6 GP12000 05419 586
71
GRINDING BLOCKS & HEADS
Canadian Pricing Floor Grinding Blocks
• Grinding blocks designed for wet floor grinding
• Can be easily re-segmented
• Set of three or six diamond blocks available that also work with competition-style floor grinders
• Works best for grinding high spots, preparation for new finished or polished concrete floors
• Made with top quality diamonds to ensure long lasting, fast grinding efficiency
Diamond Grinding Blocks
Part # CAT # Application Spec List Price
GB4000 39674 Hard Concrete, Non-Abrasive GB64 $290
GB4000 68323 General Purpose GB66 290
Aluminum Disc Shown with Grinding Blocks GB4000 76121 Epoxy Mortar, Long Life GB68 290
GB4000XT 40386 Super Premium, General Purpose GBXT 362
Terrazzo Grinding-Contains Diamonds
GB4000 43782 60 Grit GB50T60 $290
GB4000 60218 80 Grit GB50T80 290
GB4000 45915 120 Grit GB50T120 290
Grinding Block Steel Shoe with 4 Segments
GB4000S 93642 Hard Concrete, Non-Abrasive GB50 $238
Diamond Segmented Carbide GB4000S 54071 Medium Hard Concrete GB60 238
Grinding Block Cutting Block
GB4000S 96260 Medium Concrete GB64 238
GB4000S 96261 General Purpose GB66 238
Grinding blocks have a bolt-on back which GB4000S 95837 Abrasive Materials GB68 238
offers a more secure holding of the diamond
grinding block. GB4000SV 33913 Extremely Hard Concrete (bolt on) C19 347
GB4000SV 74985 Very Hard Concrete (bolt on) C42 347
GB4000SV 33910 Hard Concrete (bolt on) C51W 347
*Designed for CCB4000 72741 Carbide Cutting Block --- 383
our dual head
floor grinders. CCBI4000 85627 Carbide Cutting Insert Only --- 96
Recommended to
replace all 6 blocks 6041057 55473 Aluminum Disc-Right Side w/3 slot --- 232
at the same time.
6041058 47862 Aluminum Disc-Left Side w/3 slot --- 232
GB4000XT Super Premium
Block-11mm segment height- WEDGES 46872 Wooden Wedges for Holding --- 5.68
Grinding Stones
extra long life
(See Abrasives Section)
CPG80E Floor Grinder PCD Grinding PCD
Grinding
For epoxy and glue removal. Use in multiples on
8” or 10” grinding head. Wing
For use on CORE CUT single or dual head floor grinders.
PCD Grinding Heads
Part # CAT # Application List Price
PCDWING 21751 PCD wing for grinding $267
GH08PCD 13406 (3 pieces per grinding head) 784
GH10PCD 8” grinding head with 2 PCD grinding wings 1011
GH10PCDLEFT 1011
CGPC4500 23758 10” grinding head with 3 PCD grinding wings 466
EPOXY & GLUE CGPC7000 54116 10” grinding head (Left) with 3 PCD grinding wings 581
14986
21715 4-1/2” x 5/8-11 PCD General Purpose Cup Grinder for
epoxy, glue & mastic removal
7” x 5/8-11 PCD General Purpose Cup Grinder for
epoxy, glue & mastic removal
PCD grinding heads use the DRY discount. For use on To ensure maximum performance,
All other grinding heads use the Wet discount. floor grinding water is required to cool grinding tools
machines. during the grinding process.
72
FLOOR GRINDING HEADS Canadian Pricing
Floor Grinding Heads
• Large 10” and 12” grinding heads that take the rough spots out of concrete surfaces in a hurry along with an 8” head for smaller units
• Effective on floors, streets, highways, sidewalks and more
• Cleans, levels and smooths bumps and uneven areas
• Removes rain spots and epoxies
• For use on Core Cut floor grinders and other similar machines
8” HEAVY DUTY ORANGE 10” PREMIUM BLACK
Floor Grinding Heads Floor Grinding Heads
Material, Abrasive Level 8”, 12 Seg CAT # List Price Material, Abrasive Level 10”, 12 Seg CAT # List Price
Specification Specification
Hard, Non-Abrasive GSH9 03330 $770 Hard, Non-Abrasive GSP10 11406 $1,065
Soft, Abrasive GHH9 14317 770 Soft, Abrasive GHP10 20198 1,065
Material, Abrasive Level CAT # List Price
10” HEAVY DUTY ORANGE 10”, 24 Seg 00019
Floor Grinding Heads Hard, Non-Abrasive Specification $1,804
GSP20
Soft, Abrasive GHP20 11410 1,804
Material, Abrasive Level 10”, 12 Seg CAT # List Price 12” PREMIUM BLACK
Specification Floor Grinding Heads
Hard, Non-Abrasive GSH10 11393 $861
Soft, Abrasive GHH10 23592 861 Material, Abrasive Level 12”, 12 Seg CAT # List Price
Specification
Material, Abrasive Level 10”, 24 Seg CAT # List Price
Specification Hard, Non-Abrasive GSP12 41193 $1,432
Hard, Non-Abrasive GSH20 11401 $1,427 Soft, Abrasive GHP12 41194 1,432 CPG100 Floor Grinder
Material, Abrasive Level CAT # List Price
Soft, Abrasive GHH20 11398 1,427 12”, 24 Seg 39164
Hard, Non-Abrasive Specification $2,133
12” HEAVY DUTY ORANGE
Floor Grinding Heads GSP24
Soft, Abrasive GHP24 40051 2,133
Material, Abrasive Level 12”, 12 Seg CAT # List Price HARD AGGREGATE GENERAL PURPOSE
Specification CONCRETE
Hard, Non-Abrasive GSH12 69786 $1,217
Soft, Abrasive GHH12 76758 1,217
Material, Abrasive Level 12”, 24 Seg CAT # List Price
Specification
Hard, Non-Abrasive GSH24 39534 $1,781
Soft, Abrasive GHH24 38541 1,781
For use on To ensure maximum performance,
floor grinding water is required to cool grinding
machines. heads during the grinding process.
73
DIAMOND GRINDING INSERTS
Core-Lock System
Canadian Pricing CORE-LOCK Diamond Segmented Grinding Inserts SEGMENT Part numbers shown
STYLE are for a package of 3
• Good diamond quality for aggressive removal - also great
for removing epoxy and paint grinding inserts
• Used in sets of three and available in single or double
segments
• For use on floor grinding heads on walk behind machines
• Core-Lock System allows quick installation and worry-free
performance
SEGMENT
STYLE
Single Segment Grinding SINGLE Segment Grinding
Insert Soft Concrete Insert Medium Concrete
Grit Core-Lock Core-Lock List Grit Core-Lock Core-Lock List
Price Price
SOFT CONCRETE Part # Cat # MEDIUM CONCRETE Part # Cat #
25 GSS1025 69022 $248 16 GMS2016 69429 $248
40 GSS1040 69102 248 25 GMS2025 69462 248
80 GSS1080 69191 248 40 GMS2040 70169 248
150 GSS1150 69193 248 80 GMS2080 69818 248
Double Segment Grinding 150 GMS2150 70241 248
Insert Soft Concrete
DOUBLE Segment
Grit Core-Lock Core-Lock List Grinding Insert Medium
Price
Part # Cat # Concrete
25 GSD1025 69345 $339 Grit Core-Lock Core-Lock List
Part # Cat # Price
40 GSD1040 69391 339
25 GMD2025 70249 $339
80 GSD1080 69409 339
40 GMD2040 70610 339
150 GSD1150 69426 339
80 GMD2080 70810 339
SINGLE Segment Grinding 150 GMD2150 71021 339
Insert Hard Concrete
SINGLE Segment Grinding
Core-Lock Core-Lock List EXTREMELY HARD CONCRETE
Grit Price Insert Extremely Hard
Part # Cat #
Concrete
16 GHS3016 72964 $248 Grit Core-Lock Core-Lock List
Price
DIAMOND GRINDING Inserts HARD CONCRETE 25 GHS3025 73820 248 Part # Cat #
40 GHS3040 75563 248 25 GXS4025 00164 $248
80 GHS3080 76449 248 40 GXS4040 03180 248
150 GHS3150 78256 248 80 GXS4080 12390 248
DOUBLE Segment Grinding 150 GXS4150 16201 248
Insert Hard Concrete
DOUBLE Segment
Core-Lock Core-Lock List Grinding Insert Extremely
Grit Part # Cat # Price Hard Concrete
Grit Core-Lock Core-Lock List
Price
16 GHD3016 78463 $339 Part # Cat #
25 GHD3025 81425 339
40 GHD3040 88918 339 25 GXD4025 25839 $339
80 GHD3080 91174 339
150 GHD3150 92798 339 40 GXD4040 30043 339
80 GXD4080 30309 339
150 GXD4150 30485 339
CORE-LOCK PCD Grinding Inserts
PCD inserts are used to Description Part # Cat # List
aggressively remove heavy or Price
thick mastics,such as glues and
grouts. PCD inserts quickly level PCD Insert for Core-Lock Grinding PCDSHOE 101406 $532
high spots on concrete. Plate, Right Handed
PCD Insert for Core-Lock Grinding PCDSHOELH 101405 532
Plate, Left Handed
74
DIAMOND GRINDING INSERTS
For HTC® Machines
HTC® Part numbers
Compatible shown are for
sets of 3.
Diamond Segmented Grinding Segments for HTC® Machines Canadian Pricing
• Good diamond quality for aggressive removal - also great for removing epoxy and paint
• Used in sets of three and available in single or double segments
• For use on HTC grinding machines
Single Segment Grinding Insert SINGLE Segment Grinding Insert
Soft Concrete Medium Concrete
Grit Part # (HTC® Cat # (HTC® List Grit Part # (HTC® Cat # (HTC® List
Compatible) Compatible) Price Compatible) Compatible) Price
MEDIUM CONCRETE
SOFT CONCRETE 25 GHSS1025 45020 $323 16 GHMS2016 45386 $323
40 GHSS1040 45084 323 25 GHMS2025 45426 323
80 GHSS1080 45121 323 40 GHMS2040 45470 323
150 GHSS1150 45142 323 80 GHMS2080 45499 323
Double Segment Grinding Insert 150 GHMS2150 45742 323
Soft Concrete DOUBLE Segment Grinding Insert
Medium Concrete
Grit Part # (HTC® Cat # (HTC® List
Compatible) Compatible) Price Part # (HTC® Cat # (HTC® List
Compatible) Compatible) Price
25 GHSD1025 45158 $404 Grit
40 GHSD1040 45184 404 25 GHMD2025 45791 $404
80 GHSD1080 45251 404 40 GHMD2040 45896 404
150 GHSD1150 45307 404 80 GHMD2080 45942 404
SINGLE Segment Grinding Insert 150 GHMD2150 45952 404
Hard Concrete
EXTREMELY HARD CONCRETE SINGLE Segment Grinding Insert
Grit Part # (HTC® Cat # (HTC® List Extremely Hard Concrete
Compatible) Compatible) Price
Grit Part # (HTC® Cat # (HTC® List
16 GHHS3016 46085 $323 Compatible) Compatible) Price
HARD CONCRETE 25 GHHS3025 46194 323 25 GHXS4025 46398 $323
40 GHHS3040 46243 323 40 GHXS4040 46399 323 DIAMOND GRINDING Inserts
80 GHHS3080 46369 323 80 GHXS4080 46401 323
150 GHHS3150 46385 323 150 GHXS4150 46496 323
DOUBLE Segment Grinding DOUBLE Segment Grinding Insert
Insert Hard Concrete Extremely Hard Concrete
Grit Part # (HTC® Cat # (HTC® List Grit Part # (HTC® Cat # (HTC® List
Compatible) Compatible) Price Compatible) Compatible) Price
16 GHHD3016 46386 $404 25 GHXD4025 46524 $404
25 GHHD3025 46387 404 40 GHXD4040 46533 404
40 GHHD3040 46391 404 80 GHXD4080 46539 404
80 GHHD3080 46392 404 150 GHXD4150 46550 404
150 GHHD3150 46393 404 HTC® is copyright of HTC Group and in no way affiliated with Diamond Products Ltd.
GRINDING SHOE GRIT COLOR CODES: For use on HTC floor
Applies to both CORE-LOCK and HTC Inserts grinding machines.
16 25 40 80 150 To ensure maximum performance,
GRIT GRIT GRIT GRIT GRIT water is required to cool grinding
heads during the grinding process.
75
F EARLY ENTRY
PRODUCTS
First-Cut ™
Early Entry Products
HIGH PERFORMANCE SAWS FOR
CUTTING GREEN CONCRETE
FULL LINE OF DIAMOND
BLADES AND SKID
PLATES FOR EARLY ENTRY
APPLICATIONS
AVAILABLE IN SKID PLATES FOR USE
BASIC AND EXPERT WITH OUR SAWS AND
GRADE WITH SIX
SPECIFICATIONS 76 COMPETITOR SAWS
LATE EARLY ENTRY Blades
Canadian Pricing
We know your jobs are unpredictable and things happen. If you missed cutting that green concrete within the two hour LATE EARLY ENTRY Blades
Control Zone, don’t worry, we’ve got you covered - even the next day.
Designed for use on our First-Cut™ early-entry saw line or competition saws.
9mm segment design Includes 1” round and
for fast cutting and 14” triangle knockout for
includes radius drop competition-style saws.
segment wear protection
First-Cut™ L8TR Blades SPECIFICATION GREEN
CONCRETE
Size Catalog # List Price L8TR - Fast cutting in
green concrete after the Late Green
6” x ..095 x 1” 104440 $249 Control Zone Concrete
or Pre-Cured
12” x .125 x 1” 104441 655
14” x .125 x 1” 104442 826
77
CC150XL-EE FIRST-CUT™ SAW Powered By:
LIGHT WEIGHT & PORTABLE
Canadian Pricing Website Product
Page
2.5HP Telescoping handle
F Baldor Electric adjusts to operator’s
height
First-Cut ™
4.8HP
Early Entry Products Honda Gasoline
Spring loaded skid plate CC150XL-EE Includes Up-cut design
or ‘blade block’ that keeps vacuum attachment
the skid plate down on the guard plate that can
connect to the CORE
surface to help prevent VAC line of vacuums.
spalling
6.5” Blade
Capacity
Electric
Gasoline
CC150XL-EE First-Cut™ Saw FEATURES SPECIFICATIONS
• Reliable skid plate system for green concrete Max. Depth of Cut 1.5” with 6.5” diameter blade
• Spring-loaded skid plate that stays down on the surface to help prevent spalling Blade Shaft RPM 4020
• Heavy duty design but light weight enough for two people to lift Blade Shaft Diameter 1-1/4”
• Fully adjustable handle bars for operator comfort Arbor Size 1”
• Five wheels under the frame for increased stability Depth Indicator Standard
• Cyclone air filter for increased air flow Dimensions 16.94” wide, 21.80” tall, 32.92” long
• Up-cut design to keep debris from going back in the cut
• Blade raise/lower mechanical mechanism with spring loaded release
• Single ribbed drive belt
• Includes vacuum attachment guard plate
CC150XL-EE EARLY ENTRY SAW
Model # Engine Make/Model Engine Power Part # Cat # Product List Price
CC125BXL-EE6 Weight (lbs) $5,560
Baldor Electric 2.5 HP 5801357 07789
120
CC148HXL-EE6 Honda® GX160 4.8 HP, 7.6 Torque (lbs.-ft.) 5801345 32739 100 4,699
CC165BVXL-EE6 Briggs® Vanguard 6.5 HP 5801346 32747 105 4,406
Horsepower as rated by the engine manufacturer.
78
Powered By: CC190PRO-EE FIRST-CUT™ SAW
PROFESSIONAL GRADE Canadian Pricing
PERFORMANCE
Website Product
Page
F
First-Cut ™
Early Entry Products
Spring loaded skid plate
or ‘blade block’ that keeps
the skid plate down on the
surface to help prevent
spalling
14” Blade Capacity Up-cut design
Gasoline SPECIFICATIONS
FEATURES Max. Depth of Cut 3-5/8” with 14” diameter CC190PRO-EE First-Cut™ Saw
Blade Shaft RPM blade
• Capable of .110” to .250” thick blades
• Self propelled drive 3500
• Raise and lower adjustable handle bars
• Heavy duty handle design Blade Shaft Diameter 1-1/4”
• Vibration dampeners that prevent rattling that disrupts the skid plate function Arbor Size 1” with single drive pin
• Self aligning blade shaft bearings Blade Raise/Lower Electric actuation
• Easy access to battery with heavy duty isolator switch to prevent power drain
• Up-cut design to keep debris from going back in the cut Transmission Eaton Model 6
• Lifting hook for easy transport Drive Speed 0-80 feet per minute
Includes: Electric start, low oil alert and tach/hour meter, vacuum side cover plate
CC190PRO-EE EARLY ENTRY SAW
Model # Engine Make/ Engine Power Part # Cat # Product List Price
CC190PRO-EE Model Weight (lbs) $23,166
Honda® GX630 20.8 HP, 35.6 Torque (lbs.-ft) 5801128 13364 420
CC190PRO-EE OPTIONS
Description Part # Cat # List Price
102452 $22,107
CVG1 Honda dust containment vacuum with hoses - dry only 5801901 106583 21,516
80580
CVG1-B Briggs dust containment vacuum with hoses - dry only 5801902 82102 517
78751 450
Vacuum side cover plate for CC190PRO-EE blade block 2708358 232
Use the Core Vac Vacuum adapter 3” to 5” (manifold assembly 1” - 3” port) 2504846
CVG1 Vacuum for the
CC190PRO-EE saw. Spot Light Kit 6047720
Includes Hoses. Horsepower as rated by the engine manufacturer.
79
B
basic FIRST-CUT™ BLADES
Canadian Pricing BASIC - GOOD QUALITY, LONG LIFE
Individual Blades - No Skid Plate
SIZE BASIC1000 BASIC2000 BASIC3000 BASIC4000 BASIC5000 BASIC6000 List Price
Cat # Cat # Cat # Cat # Cat # Cat #
4” x .080 70113 70114 70116 70117 70119 70120 $114
GREEN 6” x .100 63013 40544 40546 40547 63014 63016 201
CONCRETE 8” x .100 63056 42938 42939 42943 63058 63063 322
8” x .125 63365 63371 63372 63373 63380 63381 348
FOR USE ON 10” x .110 63382 46593 46596 46599 63384 63388 445
FIRST-CUT™ OR 10” x .250 63389 63390 63392 63396 63397 63404 750
12” x .125 63413 44970 44971 44974 63415 63416 550
COMPETITOR 12” x .250 63417 63419 63420 63421 63422 63423 903
SAWS 13.5” x .125 63426 63427 63428 63429 63430 63437 607
13.5” x .250 63440 63441 63442 63446 63447 63449 1,081
F
14” x .125 63450 44976 44977 44978 63458 63464 669
First-Cut 14” x .250 63465 63466 63467 63468 63469 63470 1,086
Early Entry Products BASIC - GOOD QUALITY, LONG LIFE - with Skid Plate
SIZE BASIC1000 BASIC2000 BASIC3000 BASIC4000 BASIC5000 BASIC6000 List Price
Cat # Cat # Cat # Cat # Cat # Cat #
6” x .100* 64125 64132 64133 64134 64135 64136 $244
8” x .100 64163 64166 64167 64185 64206 64207 368
Packaged 8” x .125 64234 64235 64236 64237 64238 64242 397
with 10” x .110 64271 64273 64274 64275 64276 64282 506
Skid 10” x .250 64335 64338 64341 64344 64345 64348 894
Plate 12” x .125 64376 64378 64379 64384 64387 64388 624
basic First-Cut™ Blades 12” x .250 64439 64441 64442 64443 64447 64448 1,063
13.5” x .125 64471 64473 64474 64479 64482 64485 682
13.5” x .250 64516 64518 64522 64526 64528 64530 1,243
14” x .125+ 64546 64547 64550 64552 64553 64555 768
14” x .250+ 64573 64579 64580 64581 64582 64583 1,228
* For use on the First-Cut CC150XL-EE saw. + For use on the First-Cut CC190PRO-EE saw.
First-Cut Bevel V-Blade
• Cleaning spalled joints First Cut Bevel V-Blade
• Decorative joints
• Creates better reservoir for SIZE/DESC Part # Cat # LIST PRICE
6” x .375 x 1”
applying joint fillers 6” x .625 x 1” CVBFC06375 106720 $805
• Create beveled edges,
CVBFC06625 106721 818
protecting joints
Bevel Blade Profile View • For use on CC150XL saws or Skid Plate for 2505482 106638 132
V-Bevel Blade
competition-style saws
80
B
EXPERT FIRST-CUT™ BLADES
EXPERT - VERY HIGH QUALITY, LONGER LIFE Canadian Pricing
Individual Blades - No Skid Plate
SIZE EXPERT1000 EXPERT2000 EXPERT3000 EXPERT4000 EXPERT5000 EXPERT6000 List Price
Cat # Cat # Cat # Cat # Cat # Cat #
6” x .095 66117 67330 57526 68407 69019 56798 $249 GREEN
CONCRETE
6.5” x 100 90411 --- --- --- --- --- 277
FOR USE ON
8” x .100 67332 67331 68352 68328 68380 68331 385 FIRST-CUT™ OR
10” x .110 68782 67318 55816 68498 51150 56801 546 COMPETITOR
SAWS
12” x .125 67326 67325 57524 68512 90673 52597 655
F
12” x .250 70590 68507 68590 68515 68475 70118 1,320
First-Cut
13.5” x .125 68438 67329 67898 69554 68378 69690 742
Early Entry Products
13.5” x .250 69159 70166 69328 69853 68434 68384 1,513
Packaged
14” x .125 68394 68392 57525 68518 51156 51177 826 with
Skid
14” x .250 68521 70559 68526 68469 68351 69770 1,595
Plate
EXPERT - VERY HIGH QUALITY, LONGER LIFE - with Skid Plate
SIZE EXPERT1000 EXPERT2000 EXPERT3000 EXPERT4000 EXPERT5000 EXPERT6000 List Price
Cat # Cat # Cat # Cat # Cat # Cat #
6” x .095* 64145 64147 64149 64150 64155 64156 $294
8” x .100 64208 64210 64212 64216 64217 64218 433
10” x .110 64288 64289 64290 64293 64296 64298 607
12” x .125 64389 64390 64402 64417 64418 64419 731
12” x .250 64449 64451 64452 64453 64458 64460 1,486
13.5” x .125 64488 64489 64493 64494 64495 64498 820
13.5” x .250 64532 64533 64535 64541 64543 64544 1,683 EXPERT First-Cut™ Blades
14” x .125+ 64557 64558 64559 64561 64562 64566 928
14” x .250+ 64584 64585 64590 64597 64598 64599 1,745
* For use on the First-Cut CC150XL-EE saw. + For use on the First-Cut CC190PRO-EE saw.
SPECIFICATIONS Consider the aggregate in
your area and cure time
Specification Aggregate before determining the bond
specification
1000-Purple Very Hard Joint Protectors
2000-Green Hard Color codes do not refer to the (50 per bag)
aggregate map color codes 2” long x 1/2” wide x 1/8” thick
3000-Red Medium Hard found at the front of this book.
4000-Orange Medium • Used when making cross-cuts in green concrete
5000-Yellow
Medium Soft
6000-Black Soft
First-Cut blades Include Part # Cat # LIST PRICE
1” arbor with drive-pin
hole and triangle knock-out JOINTPRO-50 17145 $17.03
Triangle to 1” bushing:
Part # 1700141
Cat # 102172
81
Canadian Pricing SKID PLATES
F
First-Cut
Early Entry Products
All Diamond
Products Skid
Plates Fit Most
Soff-Cut® Saws.
Only 6” and 14”
Skid Plates Will Fit
Diamond Products
Saws.
Skid Plate Features
• Stainless steel construction
• 1/8” thick bottom plate allows skid to be used for 2-3 blades before requiring replacement depending
on the abrasive properties of the aggregate and the diameter of the blade
• Steel mounting pins that won’t break or fail like some cast aluminum competitor mounts
• Mounted with a locking pin to keep the plate in place
• Fits both steel and cast skid plate saws
ALWAYS CHECK SKID PLATE BEFORE SAWING!
Look for wear at these highlighted areas on the bottom side of the skid plate. If the slot is no longer a straight
line, you must replace the skid plate.
This wear is typically seen every 2 to 3 blade lives depending on the aggregate type.
When Used with Hard Aggregate: When Used with Soft Aggregate:
Blades in hard aggregate have shorter life so the skid Blades in soft aggregate last longer so the skid plates wear out
plate will last longer. This holds true for diamond blades. with fewer blades. Blades specifications for soft aggregate are
They wear out faster, which leads to less skid plates being typically hard, which results in more skids plates being needed
needed due to less abrasion wearing on the steel skid plate. due to more abrasion on the steel skid plate.
SKID PLATES-FOR .125 & .250 THICK BLADES
Description .125 Part # .125 Cat # LIST PRICE .250” Part # .250” Cat # List Price
Skid Plate for 6” and 8” Blades 2505180*+ 95554 $43.40 6011520*+ 51726 $124.00
Skid Plate for 10” Blades 2505237+ 40038 96.49 6011523+ 56358 136.00
Skid Plate for 12” and 13.5” Blades 2505238+ 40039 66.65 2504856+ 93086 130.00
Skid Plates Skid Plate for 14” Blades 2505239*+ 42936 91.45 2505274*+ 85782 127.00
* For use on Core Cut saws. + For use on competition style saw.
Skid plates for .375” and .500” thick blades available upon request.
Part # Cat # LIST PRICE
Skid Plate for First-Cut Bevel V-Blade 106638 $132
Soff-Cut® is a registered trademark of Husqvarna AB (publ) and is in no way affiliated with Diamond Products Limited.
82
TRUE EARLY ENTRY™ SYSTEM Canadian Pricing
TRUE EARLY ENTRYTM
System Components:
™ • First-CutTM blade (2 quality grades-Basic & Expert)
• First-CutTM saw with skid plate guard system
• Optimal Time of Cutting-Known as the Control ZoneTM (2 hours after
finishing and before final set)
WHAT ARE TRUE EARLY ENTRYTM First-CutTM Skid Plate
CONTROL / RELIEF JOINTS? Guard System
As concrete is placed and being finished, chemical reactions begin to take place
causing the slab to increase in temperature. Stress, caused by shrinkage, begins to Our First-Cut saws utilize a skid plate guard system
accumulate rapidly. At this time the concrete is looking for relief. If not relieved in a that protects concrete spalling during the cut. A spring-
timely manner the concrete will relieve itself, resulting in random cracks appearing loaded skid plate holds it down and keeps aggregate
across the surface of the slab.
from pulling out of the slab. The guard system is
ByplacingTrue Early EntryTMjointsattheappropriatespacing(normally10’ low-maintenance and heavy duty to withstand
to 12’ apart) the concrete finds the relief its looking for and cracks directly beneath extended use on the job.
the cut.
The timing of True Early EntryTM joints are critical! Controlling random cracking is
all about the timing of the cut, not the depth of the cut. Cuts must be placed between
the initial set and the final set of the concrete. This CONTROL ZONETM
is the optimal cutting time to give concrete relief when it is looking for it the most.
Remember: 2 HOURS after concrete
finishing and before the final set.
Why You Need to Use the True Early EntryTM System
Uncontrolled Cracks Control/Relief Joint
Uncontrolled Controlled True Early Entry™ System
Cracks Crack
Concrete Without Control/Relief Joint Concrete With Control/Relief Joint
Without a control or relief joint made into the material, heat and cold Making a controlled cut in the concrete CONTROLS where the cracks appear.
aligned with curing can cause expanding and contracting of the concrete, When this procedure is done in determined spaced sections, the damage
creating uncontrolled cracks throughout. Those cracks will eventually and cracking is kept at a minimum which prolongs the life of the concrete slab.
create ruptures and sections that can pull apart from the rest of the material.
83
CORE CUT
84
SAWS
85
TILE SAWS CC912TS
CC600T
Canadian Pricing
7” x .060 x 5/8” 9” x .060 x 1”
Delux-Cut Tile Delux-Cut Tile Blade
Blade Included Included
7” Blade Capacity 9” Blade Capacity
Electric Electric
FEATURES FEATURES
• 1-3/4” maximum cutting depth • 800 watt, 120 volt single phase electric motor
• Easy to clean water tray • Maximum cutting depth of 1-7/8”
• Liquid cooled bearing housing • Heavy duty table with measuring guide
• Rip cut up to 17”, diagonal cut to 12” • Angle guide plate holds the work piece at various angles
• Includes 45o and 90o rip guide/miter block • Easily-adjustable cutting guide remains parallel at all times
• Automatic thermal overload protection prevents power surges • Easy mounting water tray
• Safety relay switch
and overheating • Quick-release, tool-free table mount release for easy cleaning
• 1 HP carbon brush motor gives 6,000 RPM at the blade shaft
and blade replacement
CC600T & CC912TS Tile Saw • Easy adjustment miter - up to 45 degrees with 1-7/16” depth
• Includes parallel cutting guide, angle guide plate, M8 combo
wrench and M19 combo wrench
CC600T TILE SAW
Model # Motor Power Part # Cat # Blade Product Dimensions List Price
CC600T Power Source Capacity Weight (lbs) 33”L x 20”W x 16”H $1,107
1 HP Electric 5800558PKG 65019 7” 43
CC912TS TILE SAW
Model # Motor Power Part # Cat # Blade Product Dimensions List Price
CC912TS Power Source Capacity Weight (lbs) 26”L x 21”W x 13”H $917
3/4 HP Electric 5801608PKG 79575 9” 34
Miter Block 180o Angle Guide Water Pump
Included with CC600T tile saws For CC1000T tile saws
Included with all table top tile saws
45o/90o Rip Guide (2.5 gpm)
For CC900TE tile saws
86
CC900TE TILE SAWS
ECONOMY CC1000T
SUPER DUTY
Canadian Pricing
10” x .060 x 5/8” 10” x .060 x 5/8”
Delux-Cut Tile Blade Delux-Cut Tile Blade
Included Included
10” Blade Capacity 10” Blade Capacity
Electric Electric
FEATURES FEATURES
• 3-3/4” cutting depth • 3-3/4” cutting depth
• 1-1/2 HP, 15amp, 115V high torque motor • 1-1/2 HP, 15amp, 115V high torque motor
• Rip cut up to 20”, diagonal cut to 14” • Rip cut up to 24”, diagonal cut to 18”
• Plastic tray can be removed for cleaning • Rigid, heavy duty steel frame
• Replaceable liquid cooled bearing housing • Replaceable liquid cooled bearing housing
• Blade guard includes brush for additional blade cooling • Cutting tray/cart uses ball bearing wheels for smooth movement
protection and over spray and accurate cutting
• Includes 45o and 90o rip guide/miter block • Blade guard includes brush for additional blade cooling protection
and over spray
• Includes 45o and 90o rip guide/miter block
CC900TE TILE SAW CC900TE & CC1000T Tile Saw
Model # Motor Power Part # Cat # Blade Product Dimensions List
CC900TE Power Source Capacity Weight (lbs) 39”L x 24”W x 24”H Price
1-1/2 HP Electric 5800559PKG 65020 10” 98 $1,940
CC1000T TILE SAW
Model # Motor Power Part # Cat # Blade Product Dimensions List Price
CC1000T Power Source Capacity Weight (lbs.) 43”L x 26”W x 24”H $2,137
1-1/2 HP Electric 5800572PKG 72483 10” 115
TILE SAW ACCESSORIES & OPTIONS
Description Part # Cat # List Price
Water Pump 6030060 46817 $160
45o/90o Rip Guide 6043002 57689 73
180o Angle Guide 6043004 57691 131
Miter Block CC900TE & CC1000T 6043043 60885 215
Miter Block CC600T 6043096 81771 131
Optional Folding Stand for CC600T 6043383 80419 323 Optional Folding Stand with Wheels
Optional Folding Stand with Wheels 6043528 03734 391 Scissor stand that fits
the CC900TE, & CC1000T tile saws
87
MASONRY SAWS
CC300M CC500MXL2 CC800M Block Saw
• 14” Blade Capacity • 14” Blade Capacity • 20” or 24” Blade Capacity
• 2HP Electric • 1.5/2.0/2.5HP Electric • 5HP 1PH or 3PH Electric
• 4.8HP Honda Gas • 7.5HP 1PH or 3PH Electric
• 6.5HP Briggs Gas • 8HP Honda Gas
• 11HP Honda Gas
See Our Full Line of
Masonry Blades on
Pages 54-55
88
CC300M MASONRY SAW
Blade not included Movable Head Canadian Pricing
Can Be Used To Bring the Website Product
Blade Down on the Material or Page
Locked to Push the Material
Into the Blade
Blade not included
14” Blade Capacity CC300M with Optional Wet Cut Kit
Electric Wet cut kit Includes water pump
FEATURES SPECIFICATIONS
• The most cost-efficient way to cut masonry Power Supply 115V/60Hz CC300M Masonry Saw
• Cuts 5” deep with 14” blade Motor Power 2 HP (peak 3 HP)
• Powerful 2 HP electric motor Amp Draw 15 amp
• Durable frame design RPM 3600
• Tool-free air filter replacement Max. Depth of Cut 5”
• Longer motor life due to a superior foam air filter Max. Length of Cut 16”
• Includes 2 spare air filters Material Capacity 8” x 8” x 16”
• Smooth sliding material cutting table Dimensions 23” wide, 24” tall, 28” long
• Cutting head is pulled down into the material
CC300M ELECTRIC MASONRY SAW CC300M OPTIONS
Blade Product List Description Part # Cat # List Price
Capacity Weight Price
Model # Motor Power Part # Cat # (lbs.) Folding Stand for CC300M 6043056 84808 $315
2 HP-115 Volt Wet Cut Kit for CC300M 6043058 90644 620
15 amp
CC300M 5800730 84807 14” 85 $1,811 Rip Guide 6043002 57689 73
180o Adjustable Angle Guide 6043004 57691 131
89
CC500MXL2 MASONRY SAW Powered By:
Canadian Pricing Website Product
Page
Blade not included
Blade not included
Shown with Leg Kit is
optional folding Standard
stand
CC500MXL2 Masonry Saw 14” Blade Capacity SPECIFICATIONS
Gasoline
Electric Max. Depth of Cut 5”
FEATURES Blade Shaft Diameter .875”
• Stay level blade guard Arbor Diameter 1”
• Removable cutting head
• Leg kit standard-folding stand optional Blade Shaft Bearings Flange block ball bearings
• Side carrying handles
• Replaceable conveyor cart rails Blade Shaft Drive 2 belt
• Includes water pump
• Vulcanized rubber coated material slide cart Blade Mounting Right (electric), Left (gas)
• Easy and safe access to depth control lock
• Open back cutting allows longer material to be cut Blade Raise/Lower Counterbalanced, spring tensioned head pivots
• Heavy duty frame design help resist damage to saw body Blade Coolant on two .875” flange block bearings
• Reinforced slide rails keep the cart running smoothly
• Simple yet strong design allows easy maintenance Dual spray tubes, pump fed (electric models),
• Sealed drain hole on the bottom of the tray allows quick clean up pump from tray (gas models)
Air Filter 3-stage cyclone (gas models)
Fuel Capacity 1 gallon (gas models)
High Temp Shut-off Included (electric models)
Dimensions 24.750” wide, 58.375” tall, 34” long
Low Amperage on Electric Models:
· 1.5HP Model Standard Draw 13.4 Amp
- Perfect for House Power
· 2.0HP Model Standard Draw 15.8 Amp
· 2.5HP Model Standard Draw 21 Amp
90
CC500MXL2 MASONRY SAW
CC500MXL2 MASONRY SAW
Model # Motor/Engine Make Motor/Engine Power Part # Cat # Blade Product List Price
Power Source Capacity Weight
$3,704
CC515MXL2E1 Baldor® 1.5 HP-1PH-115/230V Electric 5800799 03725 14” (lbs) 3,784 Canadian Pricing
CC520MXL2E1 Baldor® 2.0 HP-1PH 115/230V Electric 5800814 08667 14” 215 4,132
CC525MXL2E1 Baldor® 2.5 HP-1PH-115/230V Electric 5800801 03726 14” 5,176
CC548MHXL2 Honda® GX160 4.8 HP, 7.6 torque (lbs.-ft.) 5800803 03732 14” 227
Gas
CC565MBVXL2 Briggs & Stratton ® 6.5 HP 5801217 23961 228
Vanguard Gas
220
14” 170 4,740
Horsepower and torque as rated by the engine manufacturer
CC500MXL2 OPTIONS
Description Part # Cat # List Price
Folding Stand 2500839 46870 $483
Folding Stand Upgrade* 6030042 46893 333
Folding Stand Wheel Kit 6030040 48547 161
Cord 50 ft. 12GA 115V 20A Twist 4699100 47884 527
to 15A Straight
Cord 100 ft. 12GA 115 V 20A 4699101 48548 834
Twist to 15A Straight
Folding Stand Folding Stand with Wheel Kit *Must be ordered with new saw to upgrade from the leg kit.
The blade shaft and bearings are
enclosed in a dust free housing to
ensure long bearing life. The blade
shaft cover plate allows easy access for
greasing the bearings. The flange block
bearings make bearing replacement
easy without the need for a hydraulic
press or other special tools.
Removing the saw head is simple-just pull two locking CC500MXL2 Masonry Saw
pins and lift the head off of the frame. The cutting depth
adjustment is on the side of the frame instead of the back.
Side carrying handles allow transport easier while The stay-level blade guard provides the operator with safety and
keeping the saw balanced convenience while sawing. Our pivot mechanism resists slurry
build-up, which could affect pivoting performance.
91
CC800M BLOCK SAW
Canadian Pricing Website Product 24” Blade Capacity Powered By:
Page Gasoline Blade not
Electric included
Blade not
included
FEATURES
CC800M Masonry Saw • 24” blade cuts a 10” block in a single pass SPECIFICATIONS
• Variety of power options
• Stay level blade guard and enclosed blade shaft Max. Depth of Cut 8” with 20” blade, 10” with 24” blade
• Replaceable cart travel rails
• Durable 3/16” steel frame Arbor Diameter 1”
• Includes water pump
• Easy rolling 16” x 25” aluminum cutting cart/tray with vulcanized rubber Blade Shaft Bearings Flange block ball bearings
coated non-slip top Blade Shaft Drive 2 premium grip-notch v-belts
• Large capacity, deep tapered water tray
• Foot pedal controlled operating head leaves the operators hands free Blade Raise/Lower Counterbalanced, spring tensioned head pivots
on two 1” flange block bearings
to guide material
• Hand wheel for quick and easy blade cutting depth adjustment Blade Coolant Dual spray tubes, pump fed (electric models),
• Enclosed cart wheels prevent damage garden hose connection (gas models)
• Forklift opening for easy transport
• 2 V-belts promote efficient delivery of power to the blade Air Filter 3-stage cyclone (gas models)
• Open back design for rip cutting longer materials
• Counterbalanced stay level blade guard assures the head is parallel to Fuel Capacitor 1 gallon (gas models)
the cutting cart at all times High Temp Shut-Off Included (electric models)
Starter Recoil on gas models capacity on electric
models
Dimensions 23” wide, 70” tall, 65” long
92
CC800M BLOCK SAW
CC800M BLOCK SAW
Model # Motor/Engine Motor/Engine Power Part # Cat # Blade Product List Price
CC850ME1-20 Make Power Type Capacity Weight (lbs)
Baldor® 5 HP-1PH, 230V Electric 5800540 46820 20” 470 $7,772
CC850ME3-20 Baldor® 5 HP-3PH, 230V Electric 5800541A 96416 20” 460 7,957 Canadian Pricing
CC850ME3-20 Baldor® 5 HP -3PH, 460V Electric 5800541B 18533 20” 500 7,725
CC875ME1-20 Baldor® 7.5 HP-1PH, 230V Electric 5800542 47664 20” 525 8,150
CC875ME3-20 Baldor® 7.5 HP-3PH, 230V Electric 5800544A 96015 20” 510 8,338
CC875ME3-20 Baldor® 7.5 HP-3PH, 460V Electric 5800544B 96336 20” 515 8,097
CC875ME1-24 Baldor® 7.5 HP-1PH, 230V Electric 5800543 47630 24” 530 8,385
CC875ME3-24 Baldor® 7.5 HP-3PH, 230V Electric 5800545A 97240 24” 505 8,580
CC875ME3-24 Baldor® 7.5 HP-3PH, 460V Electric 5800545B 97000 24” 509 8,332
CC808MH-20 Honda® GX270 8 HP, 14.1 torque (lbs.-ft.) Gas 5800546 47024 20” 460 8,568
CC811MH-20 Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas 5800547 47047 20” 485 9,042
CC811MH-24 Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas 5800548 47046 24” 485 9,288
CC811MHE-20* Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas 5800566 60933 20” 515 9,904
CC811MHE-24* Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas 5800567 81160 24” 525 9,973
Horsepower as rated by the engine manufacturer.
*Electric start
Foot pedal leaves the CC800M Masonry Saw
operator’s hands free
which helps safety
issues when cutting
Pedal mechanism is spring Hand wheel makes
loaded, giving you more it easy to adjust
control of your cut your cutting depth
We offer 20” and 24” masonry blades to
maximize your productivity when using the CC800M or any
of the other masonry saw models.
93
CC1000 SMALL JOINT CUTTING SAW
The Ultra Lightweight Saw That Cuts Decorative
and Joint Cutting in Concrete
Powered By:
Canadian Pricing
8” Blade Capacity SPECIFICATIONS
Gasoline
Electric Max. Depth of Cut 2.250” with 8” diameter blade
FEATURES Blade Shaft RPM 6100
• Power transference to blade drive via 2 molded notch 3VX premium belts for Blade Shaft Diameter 1”
better cutting performance and long belt life
Arbor Size 1” or .625” option
• Easy to maneuver push drive
• Cyclone air cleaner for increased engine longevity Front Wheels Size 3” x 2” x .750”
• Center cut design making it easier to keep the cut straight
• Up-cut design for a cleaner cut Rear Wheels Size 5” x 2” x .750”
• Adjustable blade alignment
• 1/8” steel frame Dimensions 14.5” wide, 34.5” tall, 23.5” long
• 1” or 5/8” arbor with grease bearings
CC1000 Joint Saw Note: Electric saws do not ship with electric cord or pigtails.
3-Phase powered saws do not include male electric
connector for control box
CC1000 SMALL JOINT CUTTING SAW
Model # Engine//Motor Make Engine/Motor Power Power Part # Cat # Blade Product List Price
CC1025E-8 Source Capacity Weight (lbs) $4,590
4,549
Baldor® 2.5 HP, 110V/230V -1PH Electric 5800552 47104 8” 75 4,269
4,269
CC1025E-8 Baldor®-5/8” shaft 2.5 HP, 110V/230V -1PH Electric 5800716 63217 8” 75
CC1048H-8 Honda® GX160 4.8 HP, 7.6 Torque (lbs.-ft.) Gas 5800551 46851 8” 110
CC1048H-8 Honda® GX160-5/8” shaft 4.8 HP, 7.6 Torque (lbs.-ft.) Gas 5800620 82084 8” 120
Horsepower and torque as rated by the engine manufacturer
94
Powered By: CC1100XL JOINT CUTTING MINI SAW
Website Product Canadian Pricing
Page
Blade not included The CC1100XL can be
used with our joint cleaning
diamond blades or joint
cleaning wheels.
14” Blade Capacity SPECIFICATIONS
Gasoline
Max. Depth of Cut 4.625” with 14” diameter blade CC1100XL Joint Saw
FEATURES
Blade Shaft RPM 2650
• Heavy duty adjustable operator handles
• Easy to maneuver push drive Blade Shaft Diameter 1”
• Up-cut or down-cut available
• 1” arbor size with drive pin Arbor Size 1”
• Compact size for easy transporting
Front Wheels Size 3” x 2” x .750”
Rear Wheels Size 8” x 2” x .750”
Dimensions 19.5” wide, 40.750” tall, 36” long
CC1100XL JOINT CLEANING MINI GAS SAW
Model # Engine Make Engine Power Part # Cat # Blade Product List Price
Capacity Weight (lbs)
CC1111HXL-14 Honda® GX390-Downcut 11.7 HP, 19.5 Torque (lbs.-ft.) 5801015 04648 14” 185 $4,768
CC1111HUXL-14 Honda® GX390-Upcut 11.7 HP, 19.5 Torque (lbs.-ft.) 5801020 08366 14” 215 4,768
Horsepower and torque as rated by the engine manufacturer.
95
CCE0900 PORTABLE SAW Powered By:
Canadian Pricing Website Product
Page
20” Blade Capacity
Gasoline
Blade not included
Heavy duty adjustable handles and precision
screw feed raise and lower
FEATURES SPECIFICATIONS
• Heavy duty design, but light weight enough for two people to lift Max. Depth of Cut 7-5/8”
• Cyclone air filter
• Easy to read built-in depth indicator Blade Shaft RPM 2600
• Precision dial screw feed raise and lower handle
• Poly V-Belts Blade Shaft Diameter 1”
• Water tank* and lifting bale included
Arbor Size 1” with single drive pin
** For dust suppression when dry cutting.
CCE0900 Saw Blade Raise/Lower Precision screw feed
Sawing Side Right side only
CCE0900 PORTABLE SAW
Model # Engine Make Engine Power Power Source Part # Cat # Blade Capacity Product List Price
CCE0911H-20 Honda GX390 Weight (lbs)
11.7 HP Gas 5801613 30396 20” 290 $3,609
Horsepower and torque as rated by the engine manufacturer.
96
Powered By: CC1200XL PORTABLE SAW
Includes water tank
for dust suppression
14”-18” Blade Capacity Website Product Canadian Pricing
Gasoline Page
Blade not included
Heavy duty built-in depth indicator within
easy view during operation allows quick
measuring of the blade depth.
SPECIFICATIONS
FEATURES Max. Depth of Cut with 14” Blade 4-5/8”
• Heavy duty design, but light weight enough for two people to lift Max. Depth of Cut with 18” Blade 6-5/8”
• Cyclone air filter (Honda® models)
• Easy to read built-in depth indicator Blade Shaft RPM 2600
• Dial screw feed raise and lower handle
• Adjustable heavy duty handles do not rattle like competitor handles Blade Shaft Diameter 1-1/4”
• Left or right hand sawing
• Poly V-Belts Arbor Size 1” with single drive pin
• Water tank (10 gallon) and lifting bale included
Blade Mounting Right or left
Blade Raise/Lower Precision screw feed
Depth Indicator Standard
CC1200XL SMALL WALK BEHIND SAW
Saw Model # Engine/Motor Engine/Motor Engine/Motor Power Power Blade Part # Cat # Product List Price
Source Capacity Weight (lbs)
Make Model
CC1208HXL-14 Honda® GX270 8.5 HP, 14.1 Torque (lbs.-ft.) Gas 14” 5801092 32360 245 $4,374
CC1211HXL-14 Honda® GX390 11.7 HP, 19.5 Torque (lbs.-ft.) Gas 14” 5801093 32363 271 4,558 CC1200XL Saw
CC1208HXL-18 Honda® GX270 8.5 HP, 14.1 Torque (lbs.-ft.) Gas 18” 5801095 32424 256 4,378
CC1211HXL-18 Honda® GX390 11.7 HP, 19.5 Torque (lbs.-ft.) Gas 18” 5801097 32453 294 4,576
◊ Briggs 2100 Series models include a Diamond Products 3-year extended warranty. Horsepower and Torque as rated by the engine manufacturer.
CC1200XL OPTIONS
Description Part # Cat # List Price
6047309 39744 $582
Lift frame kit for older (pre-2011 models)-Standard on all new saws 6016001 92016 594
6016000 92017 667
Extra slip-on blade guard 14”
Extra slip-on blade guard 18”
Horsepower and torque as rated by the engine manufacturer. 97
CC1300XL SMALL WALK BEHIND SAW
Powered By:
Canadian Pricing Website Product Electric models are
Page suitable where
Shown with exhaust fumes are
optional water not allowed
tank & bracket kit
CC1311HXL-20 CC1310E3XL-20
blade not included blade not included
14”-20” Blade Capacity
Gasoline
Electric
Hydraulic
FEATURES SPECIFICATIONS
CC1300XL Saw • Heavy duty frame design Max. Depth of Cut with 14” Blade 4-5/8”
• Cyclone air filter (Honda® models)
• Easy to maneuver push drive Max. Depth of Cut with 18” Blade 6-5/8”
• Four position heavy duty handles offer no slack and don’t rattle like other
Max. Depth of Cut with 20” Blade 7-5/8”
adjustable handles
• Through rear axle for added strength Blade Shaft RPM 2600
• Solid sealed and self aligning blade shaft bearings
• Slip-on blade guard for easy blade access Blade Shaft Diameter 1-1/4”
• Three V-belts for extra power delivery to the blade shaft
• Left or right side sawing Arbor Size 1” with single drive pin
• Optional water tank available for dust suppression
Blade Mounting Right or left
98
Blade Raise/Lower Precision screw feed
Note: Electric saws do not ship with electric cord or pigtails.
3-Phase powered saws do not include male electric connector
for control box