99Engine Deutz TCD 2.2 75HP Tier 4 Final, liquid-cooled, turbo charged, common rail fuel injection system with DOC exhaust after treatment maintenance free operation requiring no regeneration diesel, maximum RPM 2600Blade Shaft 2” diameterDimensions Length: 79”, Width: 58”, Height: 60”, Weight: 2,540 lbs.Blade Shaft Bearings 2” Double row tapered roller pillow blockBlade Arbor Industry standard 1” with drive pinBlade Shaft Drive 3VX540 (10 belts)Hydraulics Electric over hydraulic adjustable blade raise/lower. Belt driven hydrostatic ground drive pump.Electrical 12 Volt electrical systemTravel Speed 0-300 feet per minuteExtra Features Dual side depth stops, lift frame, water on/off and metering valves, 15 gallon fuel tank, 7 gallon hydraulic tankCC7875DT4 TECHNICAL DATACC7875DT4 EZ RIDER SAWCC7875DT4 EZ RIDER DIESEL SAW - 74 HPModel # Engine Make Part # Cat # Product Weight (lbs.)Blade CapacityCC7875DT4 Deutz® Turbo CC7875DT4 103381 2,540 20”Call our Nampa, ID Facility at 800-225-0142 for more information and pricing.
100 CC8574DD-PRO RIDER SAW• Reservoir with clean out access• Infinitely variable blade speed• Programmable depth stop• Rear drive motor with increased load capacity, higher top speed, integral parking brake• Steering actuator for improved control• Positive neutral lock for wheel drive• Large diameter front and rear wheels for better traction• Trailers itself up to a 12 degree incline• Tight turn radius• Optional angle arm assembly for angled cuttingIncludes: Hour Meter, Tachometer, Telescoping Front Pointer, Adjustable Depth Stop, Cup Holder, Quick Disconnect Flanges, UmbrellaMax. Depth of Cut w/ 14” Blade 3-3/4” (6” flange)Max. Depth of Cut w/ 20” Blade 6-3/4” (6” flange)Max. Depth of Cut w/ 26” Blade 9-3/4” (6” flange)Max. Depth of Cut w/ 30” Blade 11-3/4” (6” flange)Max. Depth of Cut w/ 36” Blade 14-3/4” (6” flange)Max. Depth of Cut w/ 42” Blade 16-3/4” (7” flange)Max. Depth of Cut w/ 48” Blade 19-3/4” (8” flange)Max. Depth of Cut w/ 54” Blade 22-3/4” (9” flange)Max. Depth of Cut w/ 60” Blade 23-3/4” (10” flange)Engine Model Deutz 2.9 Turbo L4 Tier 4 FinalMax. Engine Power 74 HPBlade Shaft Diameter 2-1/2”Arbor Size 1” w/single drive pinBlade Shaft Drive Hydraulic motorBlade Mounting Right sideBlade Raise/Lower Hydraulic, solenoid valve controlledTransmission Variable displacement hydraulic pump & motorAir Filter 8” Donaldson AlexinFuel Capacity 9.5 gallons COMPLIANTTIER 4Tier 4 FinalPowered By:Blade not includedHIGH PRODUCTIVITY IN A RIDE-ON UNIT14”-60” Blade CapacityDieselFEATURESCC8574DD-PRO TECHNICAL DATA
101CC8574DD-PRO RIDER SAWModel # Engine Make Part # Cat # Blade CapacityProduct Weight (lbs.)CC8574DD-PRO-14 Deutz 5803350 115696 14” 3,715CC8574-DD-PRO-20 Deutz 5803351 115694 20” 3,725CC8574DD-PRO-26 Deutz 5803352 117921 26” 3,741CC8574DD-PRO-30 Deutz 5803353 115697 30” 3,749CC8574DD-PRO-36 Deutz 5803354 115443 36” 3,763CC8574DD-PRO-42* Deutz 5803355 115698 42” 3,772CC8574DD-PRO-48* Deutz 5803356 115699 48” 3,794CC8574DD-PRO-54* Deutz 5803357 115700 54” 3,870CC8574DD-PRO-60* Deutz 5803358 115332 60” 3,900OPTIONSDescription Part # Cat #Angle Cutting Arm AssemblyConversion Kit 6040159 22965Water Pump Kit 6016662 68495Blade spacing kit-6” flange(for blades 1-1/2” apart) 6010630C 17000Blade spacing kit-6” flange (for blades 2” apart) 6010631C 21357Blade spacing kit-6” flange(for blades 4” apart) 6010632C 17592Large blade gearbox kit 42” 6016682 68496Large blade gearbox kit 48” 6016683 68499Large blade gearbox kit 54” 6016684 68500Large blade gearbox kit 60” 6016685 68554BLADE GUARDSDescription Part # Cat #14” Tapered Mount Blade Guard 6010950 2001120” Tapered Mount Blade Guard 6010952 0821326” Tapered Mount Blade Guard 6010954 1932230” Tapered Mount Blade Guard 6010956 2045636” Tapered Mount Blade Guard 6010958 1337542” Tapered Mount Blade Guard 6010960 0821648” Tapered Mount Blade Guard 6010962 2461854” Tapered Mount Blade Guard 6010614 9972160” Tapered Mount Blade Guard 6010616 70666 Horsepower and Torque as rated by the engine manufacturer. *42” to 60” models include deep cut gearbox.Multiple access doors and pivoting hood provide quick access to all filters and hydraulics for ease of maintenanceNew rear wheel drive bracket for greatly improved strength and reduced hose swing projection. Rear kingpin design with tapered roller bearings in a fully sealed cartridge for greatly improved strength and reliabilityDigital User Interface (7”):• Engine and blade speed• Engine and hydraulic fluid temperature• Fuel level• Hydraulic low level and blade over speed warningTight Turning Radius & Integral Parking BrakeCC8574DD-PRO RIDER SAW
102 36” Standard Blade CapacityDieselCC114HCSSPECIFICATIONS Length 148” Width 66” Height 76” Wheelbase 110” x 49” Weight 7200 lbs. (Approx.)• 114HP Tier 4 Kubota V3800 diesel engine• Full time all wheel drive (AWD)• Robust redesigned hydraulic system• CAN-based electronic drive by wire controls• 20 +/- blade angle control in the pitch and roll direction with 30” blade• Ergonomic operator control station• 50 gallon on-board water/diesel tanks• LED lighting including strobes, work, safety, and backup lights• Blade angle sensors in the X & Y axis• Through hub blade water system• Auxiliary hydraulic capacityFEATURES:CC114HCS CURB CUTTERPowered By:CC114HCS CURB CUTTER - 114HPModel # Engine Make Part # Cat # Blade CapacityCC114HCS Kubota V3800 Tier 4 Diesel 5801585 108439 36”
10354” Horizontal Cutting Capacity10” Modern Digital Control TouchscreenCC114HCS CURB CUTTER
104 HAND-HELDELECTRIC HAND SAWSC14C14PROC16THE CHOICE SYSTEMFU6D INVERTERTR40 RING SAWCSE16HF CHAIN SAWTS40F HAND SAWHD16 MOTOR
105SAWINGHYDRAULIC HAND SAWSHYDRAULIC HDS60 RING SAWELECTRIC EDS60 RING SAWCSH24 CHAIN SAWCSE12 CHAIN SAW
106 • Wet or dry cutting• Overload protection with load warning LED light• Detachable guide rollers• Splash guard to protect from water spray• Handles designed for optimal control• Tool-free blade guard angle adjustment• Lightweight magnesium blade guard• Externally accessible motor brushes• Standard water feed system with fine adjustable flow and quick release coupling and durable hoseBlade not included.C14 HANDHELD ELECTRIC SAWSModel # Motor Power Power Source Part # Cat #C14 15A/120V Electric 5801601 48975C14 15A/230V Electric 5801606 73939C14PRO 25A/120V Electric 5801620 74267OPTIONSDescription Part # Cat #C14 Vacuum Skid 6078496 80698C14 ELECTRIC HAND-HELD SAWPower Input 25 AmpVoltage 120 VoltRPM 4500Arbor 1”Max. Cutting Depth 5”Cut Direction DownWeight 22 lbs. (23 lbs. with guide rollers)Water Connection for Wet CuttingBlade not included.C14 PROC1415 AmpUpgraded PRCD cord (C14 15 amp model only)25 AmpC14PROTECHNICAL DATAC14TECHNICAL DATAOptional Vac Skid Available for C14, C14PRO and C16 Saws14” Blade CapacityElectricAdjustableGuardsFEATURESPower Input 15 AmpVoltage 120 VoltRPM 4500Arbor 1”Max. Cutting Depth 5”Cut Direction DownWeight 22 lbs. (23 lbs. with guide rollers)
107Blade not included.• Wet or dry cutting• Overload protection with load warning LED light-visible to operator• Detachable guide rollers• Spring-loaded splash guard to protect from water spray• Handles designed for optimal control• Tool-free blade guard angle adjustment• Lightweight magnesium blade guard• Externally accessible motor brushes• Standard water feed system with fine adjustable flow and quick release coupling and durable hoseC16 HAND-HELD ELECTRIC SAWModel # Motor Power Power Source Part # Cat #C16 25A/120V Electric 5801605 72378C16AdjustableGuard Flush cutting is easy with removable side guardRemovable guard side for flush cutting(Flush-cut bolt pattern required on blade to cut flush)Power Input 25 AmpRPM 3900Arbor 1” plus Long Year Flush CutMax. Cutting Depth 6”Cut Direction DownWeight 24 lbs. (25 lbs. with guide rollers)OPTIONSDescription Part # Cat #EZ CORD Adapter - 12” long cord -12AWG - 115V 30 Amp Twist L5-30C / 5-15P to 15 Amp4699131 94366C16 Vacuum Skid 6078502 05225C16 TECHNICAL DATAC16 ELECTRIC FLUSH-CUT HAND-HELD SAW16” Blade CapacityElectricFEATURES25 AmpWater Connection for Wet Cutting
108 FU6 INVERTERTECHNICAL DATAPower 230V, 16amp (3700 Watt) 1PH 460V, 11.5 amp (6500 Watt) 3PHWeight 15 lbs.Dimensions Length: 11.5”, Height: 7.5”, Width: 8”For use with generator sizes:230V, single phase - 4KW460V, three phase - 11KWIncludes cord whip for 230V single phase plug is standard generator L14-30PIncluded Standard 480V plug is the same as WSE1621• The FU6D recognizes the connected machine and controls each connected machine individually.• Light-weight and easy to carry around the job site.• Keypad and Bluetooth interface integrated.FU6D INVERTERFU6D INVERTERDescription Part # Cat #FU6D Inverter 5801629 102141Digital screen that offers tool recognition, diagnostics and operating conditions.Includes water hose from inverter to the tool.FEATURES
109THE CHOICE SYSTEM HIGH CYCLE EQUIPMENTEASY CONNECTIONFU6D Is For Use On All High Cycle WEKA Equipment.WHY USE HIGH CYCLE?• High productivity• Increased power• Consistent performance without power fluctuations• Lighter-weight offers safer operation• Environmentally friendly versus hydraulic equipmentTHE CHOICE SYSTEM HIGH CYCLE EQUIPMENT
110 TR40 RING SAWTECHNCIAL DATAPower 230V, 16 amp (3700 watt) 1PH460V, 11.5 amp (6500 watt) 3PHCutting Depth 12”Weight 30 lbs.Dimensions Length: 31.5”, Height: 20.5”, Width: 11”TR40 RING SAWDescription Part # Cat #TR40 High Cycle Ring Saw with Flush Cut Guard 2600909 8411416” x .165” Heavy Duty Weka Ring Saw Blade RSHWK16165M16 9943216” x .235” Heavy Duty Weka Ring Saw Blade RSHWK16235M16 19045• Cuts deeper than standard hand saws• Rugged drive system• Easy blade tensioning system• High quality, light-weight aluminum as used on all Weka High Cycle products• Ergonomic adjustable handle• Light-weight aluminum center blade guide• Closed, water-cooled high frequency electric motor• Waterproof protection class IP 55TR40 RING SAWFEATURESBlade not included16” Blade CapacityHigh Cycle Electric
111CSE16HF CHAIN SAWTECHNCIAL DATAPower 230V, 16 amp (3700 watt) 1PH460V, 11.5 amp (6500 watt) 3PHWeight 24 lbs.Dimensions Length: 28”, Height: 12”, Width: 10”12” & 14” Chain/Bar CapacityHigh Cycle Electric• Ergonomic, adjustable handle design• Ideal for cutting small openings, corner cuts and very deep cuts as close to the wall as possible• Large selection of chains and bars vs. the competitionCSE16HF CHAIN SAWDescription Part # Cat #CSE16HF Chain Saw 2600907 747743/8” ACCESSORIESDrive Sprocket 6049139 84950Bar, 12” with 3/8” pitch 6049140 5292112” Premium Diamond Chain for General Purpose Concrete - 58 Segments DCCG5812PG 5294412” Pro Diamond Chain, 5.7mm Width, 58 segments DCCGP5812PG 73311Bar, 14” with 3/8” pitch 6049152 8314314” Premium Diamond Chain for General Purpose Concrete - 64 Segments DCCG6414PG 8265814” Pro Diamond Chain, 5.7mm Width, 64 Segments DCCGP6414PG 7331416” Premium Diamond Chain for General Purpose Concrete - 70 Segments DCCG7016PG 8495216” Pro Diamond Chain, 5.7mm Width, 70 Segments DCCGP7016PG 92606Bar, 16” with 3/8” pitch 6049141 84951DIRECT FIT ACCESSORIESBar - 12” Direct Fit 6049157 105567Bar - 16” Direct Fit 6049158 102457Bar - 20\" Direct Fit 6049174 108900CSE16HF CHAIN SAWFEATURES
112 HD16 DRILL MOTORHD16 DRILL MOTORTECHNICAL DATAPower 3700 Watt3-Speed RPM 630/1400/2900Weight 16 lbs.Dimensions Length: 17”, Height: 11.5”, Width: 5”3” (hand-held)6” (mounted) Bit CapacityHigh Cycle Electric• Oil-bath lubrication• Safety clutch• Leveling device• Closed, water-cooled high frequency electric motor• Waterproof protection class IP 55• Can be mounted on our M-3 and M-4 core rig standsIncludes Heavy Duty Carrying Case, Wrench and AdapterTS40 HAND SAWDescription Part # Cat #HD16 High Cycle Drill Motor 2600904 74773FEATURESWorks Great with Our Heavy Duty Orange High Quality CORE BORE Bits
113TS40F FLUSH CUT HAND SAWTECHNICAL DATAPower 230V, 16 amp (3700 watt) 1PH460V, 11.5 amp (6500 watt) 3PHCutting Depth 6-1/2”Arbor 1”Weight 23 lbs.Dimensions Length: 30”, Height: 15”, Width: 11”16” Blade CapacityHigh Cycle Electric• Ergonomic, adjustable handle design• Flush cut blade guard• Closed, water-cooled high frequency electric motor• Splash-proof water protection class IP 55TS40F HAND SAWDescription Part # Cat #TS40F High Cycle Flush Cut Hand Saw 2600927 110577FLUSH CUT BLADES FOR TS40FDescription Bond Part # Cat #16” x .125” Heavy Duty Orange for Hard Concrete, Long Life H7H HH16126UNVHC 10203316” x .125” XL-Turbo for General Concrete, Fast Cutting T7XL TXL16125HC 10203416” x .235 x WEKA Flush Cut H.D. Orange for Very Hard Concrete with M16 Segments H5HM-16 HH16235M16 10124116” x .250 x WEKA Flush Cut H.D. Orange for Very Hard Concrete with M16 Segments H5HM-16 HH16250M16 10124216” x .140” x 1” TGD Wet Wall Saw Blade with 20MM Segments W41SPHTGD-20 WSP16140TGDMM 10157316” x .236” x 1” TGD Wet Wall Saw Blade with 20MM Segments W41SPHTGD-20 WSP16236TGDMM 7474916” x .250” x 1” TGD Wet Wall Saw Blade with 20MM Segments W41SPHTGD-20 WSP16250TGDMM 102241TS40F HAND SAWFEATURESBlade not included
114 Hand saw carts make horizontal cutting easier and eases operator fatigue FLUSH CUT ONLYHS SERIES-FLUSH CUT WITHOUT COVERSBlade Capacity/Guard Type(GPM) Gallons Per Minute Part # Cat # Product Weight (lbs)20” Flush Cut 8 gpm 5801371 71058 3120” Flush Cut 10 gpm 5801372 50463 3120” Flush Cut 12 gpm 5801373 94878 3120” Flush Cut 15 gpm 5801374 81451 3124” Flush Cut 8 gpm 5801375 50465 3424” Flush Cut 10 gpm 5801376 50319 3424” Flush Cut 12 gpm 5801377 94076 3424” Flush Cut 15 gpm 5801378 80458 34Cover for Flush Cut 20” hand saw 2502559 80750 4Cover for Flush Cut 24” hand saw 2503508 87129 5CARTS FOR HS SERIES FLUSH CUT HAND SAWSDescription Part # Cat # Product Weight (lbs)Cart-20” Hydraulic Hand Saw 6087146 25538 45Cart-21” Hydraulic Hand Saw 6087148 17624 46Cart-24” Hydraulic Hand Saw 6087147 21803 48Cart-25” Hydraulic Hand Saw 6087149 76037 50HS Series Standard (Fixed) GuardFEATURES• Single trigger• Lightweight aluminum frame• Overhung load adapter• Manual water valve • Casappa® hydraulic motor• Down cutHS Series Flush Cut without CoverFEATURES• Single trigger• Light weight aluminum frame• Overhung load adapter• Manual water valve• Casappa® hydraulic motor• Down cut• Flush cut hub• Bolt on blade guard optionalHS SERIES-STANDARD GUARDStandard Blade Capacity(GPM) Gallons Per Minute Part # Cat # ProductWeight (lbs)16” 10 gpm 5801360 68005 3116” 12 gpm 5801361 15210 3116” 15 gpm 5801362 35393 3120” 8 gpm 5801363 91407 3320” 10 gpm 5801364 95255 3320” 12 gpm 5801365 86118 3320” 15 gpm 5801366 80760 3324” 8 gpm 5801367 97183 3724” 10 gpm 5801368 50461 3724” 12 gpm 5801369 92375 3724” 15 gpm 5801370 80466 37HYDRAULIC HAND SAWS
115PRO SERIES HYDRAULICFLUSH CUTFlush Cut Blade Capacity(GPM) Gallons Per MinutePart # Cat # ProductWeight (lbs)21” 8 gpm 5800850 03958 3921” 10 gpm 5800851 07210 3921” 12 gpm 5800852 05818 3921” 15 gpm 5800853 15005 3925” 8 gpm 5800854 08693 4125” 10 gpm 5800855 15199 4125” 12 gpm 5800856 06345 4125” 15 gpm 5800857 15201 41 PRO SERIES LIGHT WEIGHT-FLUSH CUTBlade Capacity/Guard Type(GPM) Gallons Per MinPart # Cat # ProductWeight (lbs)21” Flush Cut 8 gpm 5800860 14392 3521” Flush Cut 10 gpm 5800861 14393 3521” Flush Cut 12 gpm 5800862 12203 3521” Flush Cut 15 gpm 5800863 14397 3525” Flush Cut 8 gpm 5803013 59260 3725” Flush Cut 10 gpm 5803014 59265 3725” Flush Cut* 12 gpm 5801340 53154 3725” Flush Cut 15 gpm 5803016 59274 37Pro Series Flush CutFEATURES• Dual trigger• Light weight aluminum frame• Trigger activated water valve• Overhung load adapter• Casappa® hydraulic motor• Down cut• Flush cut with removable guard• 24.00” whip hoses includedLIGHT WEIGHT-STANDARD (FIXED) GUARDBlade Capacity/Guard Type(GPM)Gallons Per MinPart # Cat # ProductWeight (lbs)20” Standard Cut 8 gpm 5800864 47148 3020” Standard Cut 10 gpm 5800865 47149 3020” Standard Cut 12 gpm 5800866 15226 3020” Standard Cut 15 gpm 5800867 47150 3024” Standard Cut 10 gpm 5803009 89349 3324” Standard Cut 12 gpm 5803010 28009 3324” Standard Cut 15 gpm 5803011 65004 35HS Series Light Weight Standard (Fixed) GuardFEATURES• Single trigger• Light weight aluminum frame• Manual water valve• Casappa® hydraulic motor• Down cut• Our lightest weighing hydraulic hand saw*Manual Meter ValveHYDRAULIC HAND SAWS
116 CAUTIONWET CUTTING ONLY Use only in precut material to ensure safe operation.HDS60 HYDRAULIC DRAGON RING SAW‘Dragon Claw’ Ring Saw Blades for Use with Both Dragon Saws Includes Wear PlateSuggested Mobile Power Unit Models for Use with the HDS60 Ring Saw:CB18BVXL, CB20EXL, CB22HXL, CB40BVXLH.D. WET DRAGON CLAW RING BLADESWITH WEAR PLATESIZE C41HM-16 CAT #C42HM-16CAT #CRSDR18HM-16CAT #CRSDR20HM-16CAT #16” x .155 29301 93866 61775 3833020” x .155 29303 93865 61781 16362Min Blade Diameter 16”:Max Blade Diameter 20”16” Blade Cutting Depth 12”20” Blade Cutting Depth 16”Blade Cooling Water cool only (no dry cutting)PSI 2000 (2500 Max.)Weight 29.8 lbs.Connections 1/2” hose (approx 12” length)1/2” fittingsHDS60-8HDS60-12HDS60 TECHNICAL DATA • The ONLY hand saw capable of cutting up to 16” deep in concrete or block• Best power transfer to blade-where it is needed• 1/3 less cutting cost than chain sawing• Eliminates over cuts on corners• Up to three times faster than chain sawing• Diamond blade life up to five times longer• Light weight and easy to useFEATURESHYDRAULIC DRAGON RING SAWSModel # Engine Motor PowerPower Source Part # Cat #HDS60-8 8 GPM Hydraulic 5801523 87796HDS60-12 12 GPM Hydraulic 5801535 5348620” Blade CapacityHydraulic
11720” blade on gas & electric are for light duty materials only *Include wear plate• The ONLY hand saw capable of cutting up to 16” deep in concrete or block• Best power transfer to blade-where it is needed• 1/3 less cutting cost than chain sawing• Eliminates over cuts on corners• Up to three times faster than chain sawing• Diamond blade life up to five times longer• Light weight and easy to useELECTRIC DRAGON RING SAWSModel # Engine Motor PowerPower Source Part # Cat #EDS60-115 115V, 30amp Electric 5801533 46095EDS60-230 230V, 15amp Electric 5801536 53995ACCESSORIESDescription Part # Cat #Wear Plate (not included with saw)For saws before 2022 6061184 86515Wear Plate (not included with saw)For saws after 2022 6061474 108168Guide Roller 6061253 60574#12 Drive Wheel without Groove 6061186 88528#13 Drive Wheel with Groove 6061187 88560CertifiedCAUTIONWET CUTTING ONLY Use only in precut material to ensure safe operation.Blade not includedMin Blade Diameter 16”:Max Blade Diameter 20”16” Blade Cutting Depth 12”20” Blade Cutting Depth 16”Blade Cooling Water cool only (no dry cutting)Power Head Weka RS30Power 115V, 30A, 3200W230V, 15A, 3200WOverload ElectronicWeight 34 lbs.EDS60-115EDS60-230EDS60 TECHNICAL DATAEDS60 ELECTRIC DRAGON RING SAW20” Blade CapacityElectricFEATURESBlades not includedIncludes Wear Plate
118 DIAMOND CHAIN SAWSCSE12 ELECTRIC CHAIN SAWDIAMOND PRODUCTS Description Part # Cat # Weight lbs)CSE12 Electric Chain Saw (110V) 5801623 90886 12CSE12 Electric Chain Saw (230V) 5801626 100090 12Sprocket for CSE12 (3/8” pitch) 6049160 73280 .512” Bar for CSE12 (3/8” pitch) 6049161 73299 212” Chain for CSE12 (3/8” pitch) DCCC5013PG 100091 1CSE12 Package (110V) 5801623PKG 100696 18CSE12 Package (230V) 5801626PKG 100758 18• 12” maximum cutting depth• Electronic overload and thermal protection• LED load indicator allows cutting at maximum efficiency• Built-in levels for accurate cutting alignmentIncludes 3/8” Sprocket. Chain and bar only included in packages110V: 3000 Watt220V: 3200 WattCSE12 - 12” Bar CapacityElectricFEATURESCSE12DIRECT FIT COMPETITOR CHAIN & BARSDescription Part # Cat #15” Direct fit Heavy Duty chain - 59 segments DCCCD5915HD 10890120” Direct fit Heavy Duty chain - 69 segments DCCCD6920HD 10890225” Direct fit Heavy Duty chain - 81 segments DCCCD8125HD 10890330” Direct fit Heavy Duty chain - 92 segments DCCCD9230HD 11163715” Direct fit bar (fits competitor saws 853/880/890) 6049154 10142216” Direct fit bar (fits competitor saws K960/970) 6049158 10245720” Direct fit bar (fits competitor saws 853/880/890) 6049155 10556525” Direct fit bar (fits competitor saws 853/880/890) 6049156 10556612” Direct fit bar (fits competitor saws K960/970) 6049157 105567Drive sprocket, Direct Fit (Weka & competitor saws K960/970) 6049169 105336Drive sprocket Direct Fit (competitor saws 853/880 Pro) 6030703 108898Drive sprocket Direct Fit (competitor saws 890) 6030704 108899Direct Fit Chain for Force-Style Bars & SprocketsF4 StyleChain/Bar/SprocketFOR FORCE-STYLE SAWS
119WEKA CSE16HF HIGH FREQUENCY CHAIN SAW Description Part # Cat # Weight lbs)CSE16HF Weka Chain Saw 12”/14” w/o Inverter 2600907 74774 21WEKA FU6D Power Inverter230V, 16amp (3700 Watt) 1PH 460V, 11.5 amp (6500 Watt) 3PH5801629 102141 25• High cycle and high productivity• Longer lasting equipment and increased efficiency• Lower maintenance• Increased power that allows for maximum cutting• Consistent performance without power fluctuations• Rugged operation for less tool wear• Part of THE CHOICE SYSTEM of high cycle equipmentWEKA CHAIN SAW ACCESSORIESIncludes 3/8” Sprocket. Chain and bar not includedWEKA CSE16HF - 12”/14”/16” Bar CapacityHigh Cycle ElectricFEATURESCSE16HF 3/8”Chain/Bar/Sprocket12” CHAINS BAR & SPROCKET - WEKA CSE16HFDescription Part # Cat #Bar - 12\" (3/8\" pitch) 6049140 5292112\" Diamond chain concrete Premium general purpose with 64 segments (3/8” pitch) DCCG5812PG 52944Bar - 12” Direct Fit 6049157 10556712” Heavy Duty Direct Fit diamond chain with 50 segments for heavy duty jobs DCCDG5012HD 11163614” CHAINS, BAR & SPROCKET - WEKA CSE16HFBar - 14” 3/8” pitch 6049152 8314314” Diamond Chain Concrete Premium General Purpose with 64 Segments (3/8” pitch) DCCG6414PG 8265814” Diamond Chain Concrete Premium General Purpose Special 5.7mm width, 64 segs DCCGP6414PG 7331416” CHAINS, BAR & SPROCKET - WEKA CSE16HFBar - 16\" (3/8\" pitch) 6049141 8495116” Diamond chain concrete Premium general purpose with 64 segments (3/8” pitch) DCCS6416PG 3702316” Diamond chain concrete Premium general purpose Special 5.7mm width, 70 segs DCCGP7016PG 92606Bar - 16” Direct Fit 6049158 10245716” Heavy Duty Direct Fit diamond chain with 59 segments for heavy duty jobs DCCDG5916HD 108867ACCESSORIES FOR WEKA CSE16HFDrive sprocket for Weka Chain Saw 6049139 84950Drive sprocket for Weka Chain Saw - Direct Fit 6049169 105336Chain assembly kit 6049132 8184020” CHAINS, BAR & SPROCKET - WEKA CSE16HFBar - 20\" Direct Fit 6049174 10890020” Diamond Chain Concrete Premium General Purpose with 68 Segments (3/8” pitch) DCCDG6820HD 111196
120 DIAMOND CHAINS, BARS & SPROCKETS3/8”Chain/Bar/Sprocket• Unique bar mount design allows you to flush cut to the wall, floor or ceiling• Cuts 1.5” deeper than the competition• Runs much quieter than gas powered saws• Our own bar and chain-available in sizes 12”, 16”, 20’ and 24”• Minimum hydraulic supply: 10 GPM, maximum: 12 GPMCSH24 FLUSH CUT CHAIN SAW DIAMOND PRODUCTSDescription Part # Cat # Weight (lbs)CSH24 Flush Cutting Hydraulic Chain Saw 5801010 55079 27Includes 3/8” Sprocket. Chain and bar not includedCSH24 - 12”-24” Bar CapacityHydraulicFEATURES12” BAR & CHAINS FOR DIAMOND PRODUCTS CSH24Description Part # Cat #Bar - 12” (3/8\" pitch) 6049134 9927812\" Premium, fast cutting diamond chain with 62 segments (3/8” pitch) DCC6212PG 8053212” Extreme Pro diamond chain with 62 segments for rugged extreme jobs (3/8” pitch) DCCP6212PG 56913Bar - 12” Direct Fit 6049173 10561412” Heavy Duty Direct Fit diamond chain with 52 segments for heavy duty jobs DCCD5212HD 11123916” BAR & CHAINS FOR DIAMOND PRODUCTS CSH24Bar - 16” (3/8\" pitch) 6049135 8420816\" Premium, fast cutting diamond chain with 74 segments (3/8” pitch) DCC7416PG 8069416” Extreme Pro diamond chain with 74 segments for rugged extreme jobs (3/8” pitch) DCCP7416PG 43048Bar - 16” Direct Fit 6049170 10560216” Heavy Duty Direct Fit diamond chain with 62 segments for heavy duty jobs DCCD6216HD 10887020” BAR & CHAINS FOR DIAMOND PRODUCTS CSH24Bar - 20” (3/8\" pitch) 6049136 9928520\" Premium, fast cutting diamond chain with 86 segments (3/8” pitch) DCC8620PG 8178720” Extreme Pro diamond chain with 86 segments for rugged extreme jobs (3/8” pitch) DCCP8620PG 82607Bar - 20” Direct Fit 6049171 10561520” Heavy Duty Direct Fit diamond chain with 72 segments for heavy duty jobs DCCD7220HD 10887324” BAR & CHAINS FOR DIAMOND PRODUCTS CSH24Bar - 24” (3/8\" pitch) 6049137 1870924\" Premium, fast cutting diamond chain with 98 segments (3/8” pitch) DCC9824PG 8178924” Extreme Pro diamond chain with 98 segments for rugged extreme jobs (3/8” pitch) DCCP9824PG 82657Bar - 25” Direct Fit 6049172 10561625” Heavy Duty Direct Fit diamond chain with 82 segments for heavy duty jobs DCCD8225HD 108871ACCESSORIES FOR CSH24Link with Segment 6049133 81841Drive sprocket for CSH24 Chain Saw with 3/8\" Pitch 6049138 84925Drive sprocket for CSH24 Chain Saw with Direct Fit 6049164 102468Chain assembly kit 6049132 81840
1213/8” CHAIN & BAR SPROCKETS - COMPETITOR EQUIPMENTDescription Part # Cat #Drive sprocket chain saw (with clip) 890 Saw 6049142 85323 Drive sprocket chain saw 823/853/880* 6049143 85310 TRANS TORQUE 14MM SHAFT 8GPM 823/853 chain saws 6049144 85313 TRANS TORQUE 16MM SHAFT 12GPM 853+/880F4 6049145 40181Chain assembly kit 6049132 8184015” bar with 3/8\" pitch for 853/880/890 chain saws 6049146 8531419” bar with 3/8\" pitch for 853/880/890 chain saws 6049147 4058224” bar with 3/8\" pitch for 853/880/890 chain saws 6049148 4065430” bar with 3/8\" pitch for 853/880/890 chain saws 6049149 406863/8” DIAMOND CHAIN - COMPETITOR EQUIPMENTDescription Part # Cat #15\" Premium, Competition-Style General Purpose Diamond Chain with 66 Segments (3/8” pitch) DCCC6615PG 8532219\" Premium, Competition-Style General Purpose Diamond Chain with 78 Segments (3/8” pitch) DCCC7819PG 4069924\" Premium, Competition-Style General Purpose Diamond Chain with 94 Segments (3/8” pitch) DCCC9424PG 4075530\" Premium, Competition-Style General Purpose Diamond Chain with 110 Segments (3/8” pitch) DCCC11030PG 4077615” Extreme Pro diamond chain with 66 segments for rugged heavy duty jobs (special wide) (3/8” pitch) DCCCP6615PG 8252019” Extreme Pro diamond chain with 78 segments for rugged heavy duty jobs (special wide) (3/8” pitch) DCCCP7819PG 8260224” Extreme Pro diamond chain with 94 segments for rugged heavy duty jobs (special wide) (3/8” pitch) DCCCP9424PG 826033/8” CHAIN & BAR SPROCKETSCOMPETITOR EQUIPMENT GAS & ELECTRICDescription Part # Cat #DRIVE SPROCKET for K950/K960/K970 chain saws 6049153 82489DRIVE SPROCKET for 603/Redzaw, IC613/633/680 and Husq K6500 6049139 8495012” BAR for ICS 613/633/680 and Husq K960/K970 6049140 5292114” BAR for ICS 613/633/680/695 and Husq K950/K960/K970 6049152 8314316” BAR for ICS 633/695 and Husq K950/K960K970 6049141 8495116” BAR for Stihl GS 461 Rock Boss 6049150 3702512” Premium, fast cutting diamond chain with 58 segments (3/8” pitch) DCCG5812PG 5294414” Premium, fast cutting diamond chain with 64 segments (3/8” pitch) DCCG6414PG 8265816” Premium, fast cutting diamond chain with 70 segments DCCG7016PG 8495216” Premium, fast cutting diamond chain for Stihl saw with 64 segments DCCS6416PG 3702312” Diamond Chain Concrete Premium General Purpose Special 5.7mm width, 58 segs DCCGP5812PG 7331114” Diamond Chain Concrete Premium General Purpose Special 5.7mm width, 64 segs DCCGP6414PG 7331416” Diamond Chain Concrete Premium General Purpose Special 5.7mm width, 70 segs DCCGP7016PG 92606Clip IncludedBushing Not IncludedDIAMOND CHAINS, BARS & SPROCKETS3/8” Bar for Competitor Chain Saws3/8”Chain/Bar/SprocketFOR COMPETITOR SAWS
122WALL SAWSCC1600WSE1621WSE2226
123WIRE SAWSSBWCH17 / WCE17CCH25 / CCE25WS25WSE30-XLEWS50-XLE
124 *Packages include: wall saw head, 36” blade guard, 90” track, 51” track, 4 track feet and tool kit.THE VERSATILE WALL SAW THAT DELIVERS DEPENDABLE, FULL CUTTING CAPABILITY• Solid design and construction• Three piece body for economical body repair• Robust gears for increased strength and performance• Flush and angle cutting capability• Available with 3.8 cubic inch or 5.2 cubic inch motor• Saw comes standard with flush cut and complete tool kit• Maximum flow and pressure: Max 30 GPM, Max 3000 psi• 35 HP at maximum 30 GPM - 3000 psiCC1600 WALL SAWSDESCRIPTION PART # CAT #CC1600-3.8PA Auto Travel Wall Saw Package * with tracks, 36” guard & aluminum track feet (LY style) 5800933 79609CC1600-5.2PA Auto Travel Wall Saw Package* with tracks, 36” guard & aluminum track feet (LY style) 5800934 81683CC1600-3.8PS Auto Travel Wall Saw Package* with stiffened track, 36” guard & steel track feet 5800931 78128CC1600-5.2PS Auto Travel Wall Saw Package* with stiffened track, 36” guard & steel track feet 5800932 78495CC1600 WALL SAWING SYSTEMS54” Blade CapacityHydraulicFEATURES
125CC1600 WALL SAW HEADS & MOTORSDescription Part # Cat #CC1600-3.8 Manual Travel Wall Saw Head with motor and tool kit 5800925 85207CC1600-3.8 Auto Travel Wall Saw Head with motor and tool kit 5800921 78012CC1600-5.2 Auto Travel Wall Saw Head with motor and tool kit 5800922 78416Cross 3.8 cubic inch hydraulic motor 2600375 83144Cross 5.2 cubic inch hydraulic motor 2600092 52158CC1600 WALL SAW TRACKDescription Part # Cat # Product Weight (lbs)40” track without stiffener * 6050166 48574 1751” track without stiffener * 6050167 47639 2390” track without stiffener * 6050168 46856 37120” track without stiffener * 6050169 47523 50144” track without stiffener * 6050197 72750 10040” track with stiffener ** 6050161 48575 2951” track with stiffener ** 6050162 48576 3790” track with stiffener ** 6050163 48577 37120” track with stiffener ** 6050164 48578 82* Use with standard aluminum track foot-Part # 4400106 – See below ** Use with steel track foot-Part # 6050130 – See belowCC1600 TRACK STIFFENERDescription Part # Cat # Product Weight (lbs).40” stiffener only 6050191 48579 1551” stiffener only 6050192 48580 2090” stiffener only 6050193 48581 33120” stiffener only 6050194 48582 44 * Requires stiffened trackCC1600 OPTIONAL WALL SAW CARTSDescription Part # Cat # Product Weight (lbs).Cart for CC1600 Wall Saw 5800972 31060 140CC1600 TRACK FOOT SYSTEM & TRACK FEETDescription Part # Cat # Product Weight (lbs).Angle track foot assembly 6050212A 70917 12Angle stiffener foot 6050212B 71084 8Angle track & stiffener foot assembly 6050212C 71085 19Steel track foot for stiffened track 6050130 48583 16Stair track foot * 6050150 48585 16Standard aluminum track foot 4400106 01942 8Rotating track foot 3401451 02465 10XL track foot assembly, aluminum for un-stiffened track 4400417 74414 24Steel Track FootCC1600 WALL SAWING SYSTEMSWall Saw Cart
126 CC1600 WALL SAW BLADE GUARDSONE-PIECE BLADE GUARDS WITHOUT WATER TUBESBLADECAPACITYONE PIECEGUARD PART #ONE PIECEGUARD CAT #24” 6049093 4587230” 6049094 6440636” 6049095 4590042” 6049096 7006648” 6049097 4591754” 6049098 46101 Designed for CC1600 and LY1500 wall saws.TWO-PIECE BLADE GUARDS WITHOUT WATER TUBESBLADECAPACITYTWO PIECEGUARD PART #TWO PIECEGUARD CAT #24” 6047038 4858630” 6047039 4858736” 6047040 4764042” 6047041 4858848” 6047042 4858954” 6047043 4859060” 6049013 8325966” 6049011 86957TWO-PIECE BLADE GUARDS WITH WATER TUBESBLADECAPACITY2-PIECE GUARD PART #2-PIECE GUARD CAT #24” 6047000 0258730” 6047003 0258936” 6047006 0259242” 6047009 0259548” 6047012 0259854” 6047015 0260060” 6049014 6469066” 6049012 28407 Designed for the LY360-35H wall saws with water directed through blade guard (instead of the arm).ONE-PIECE BLADE GUARDS WITH WATER TUBESBLADECAPACITYONE PIECEGUARD PART #ONE PIECEGUARD CAT #24” 6048978 63690 30” 6048979 63692 36” 6048980 63693 42” 6048981 63705 48” 6048982 63711 54” 6048983 63729 60” 6048984 63731 66” 6048985 63773 Designed for CC1600 and LY360-35H wall saws.With Water TubesWith Water Tubes Designed for CC1600 & LY1500 Wall Saw.STANDARD-ONE AND TWO PIECE GUARDS-2” WIDE
127FLUSH CUT-ONE AND TWO PIECE, 1” WIDETWO-PIECE FLUSH CUT BLADE GUARDS WITHOUT WATER TUBESBlade Capacity Part # Cat #24” 6047050 8408130” 6047051 8212836” 6047052 8004242” 6047053 8212748” 6047054 8408254” 6047055 83770 Designed for CC1600 and LY1500 Wall Saw.TWO-PIECE FLUSH CUT BLADE GUARDS WITH WATER TUBESBlade Capacity Part # Cat #24” 6047020 4859530” 6047021 4688936” 6047022 4756842” 6047023 0260248” 6047024 4752154” 6047025 02603 Designed for the LY360-35H wall saws with water directed through blade guard (instead of the arm).ONE-PIECE FLUSH CUT BLADE GUARDS WITHOUT WATER TUBESBlade Capacity Part # Cat #24” 6049085 4488330” 6049086 6682236” 6049087 4488442” 6049088 4504948” 6049089 4508954” 6049090 4530660” 6049091 4563166” 6049092 45734 Designed for CC1600 and LY1500 wall saws.With Water TubesCC1600 Wall Saw Blade Guards
128 WSE1621 HIGH-CYCLE WALL SAW SYSTEMSBLADEMaximum cutting depth (with 63” blade 28”Maximum starter blade size 35”Blade mount Quick-release flangeMOTORWater cooled high frequency motorOutput at 32 amp 20 kW, 22.79 horsepower400-480 Voltage 50 / 60 HzWEIGHTWall Saw WSE1621 51.8 lbs.Electric main drive motor 33 lbs.Radio remote control 4 lbs.Blade guard (39”) 47 lbs.Track - 43” 21 lbs.Track - 65” 33 lbs.Track 75” 36 lbs.Track 86” 41lbs.Trolley Cart 46 lbs.TECHNICAL DATA• Weighs less than other wall saws - 51.8 lbs. with head, 35 lbs. without• More power water-cooled 20 kW HF motor• Cut depths up to 28”, blade capacity up to 63”• Bi-Directional blade rotation• Newly designed, ultra-light and robust, stay-level blade guard• Compact drive motor and inverter with tool-free quick connection• Innovative communication color interfaces• Revolutionary P2® drive technology for extreme reliability without power lossTool-free motor connectionLightweight and Sturdy Blade GuardCompact, handy remote control with displayWSE1621 System Includes:42” and 86” aluminum track, track connector, V-track aluminum feet, tool box, V-swivel track feet, V-rotary rail support complete, small trolley cart63” Blade CapacityElectricFEATURESPart of THE CHOICE SYSTEM
129WSE1621 WALL SAW SYSTEMDescription Part # Cat #WSE1621 Complete Wall SawIncludes: Main motor, Remote control unit, Trolley cart, 40” blade guard, 42” aluminum track, 86” aluminum track, Tools, 4 V-track aluminum feet5801549 88831WSE1621 ACCESSORIESAngle Track Feet 3400479 74712V-Rotary/Angle Track Feet 3401451 02465Aluminum/Steel Track 43” (new G style) 3402051 67409Aluminum/Steel Track 86” (new G style) 3402050 67408Aluminum/Steel Track 130” (new G style) 3400888 70232Track Connector 3402067 70393Universal adapter mount for main WSE1621 motor to use on CCE25/WSE14 Saws 3404368 68067WSE1621 BLADE GUARDS32” Blade Guard 3401454 9228448” Blade Guard 3401456 97006Blade Guard Hook Holder 3400746 4798832” Blade Guard Flush cut & normal cut - all in one (3-piece) 3402551 3154140” Blade Guard Flush cut & normal cut - all in one (3-piece) 3402552 8093048” Blade Guard Flush cut & normal cut - all in one (3-piece) 3402553 3057356” Blade Guard (2-piece) Requires Hook Holder Part # 3400746 3401979 7857763” Blade Guard Flush cut & normal cut - all in one (2-piece) * 3400102 0144863” Blade Guard Uptake 3401457 9696686” Blade Guard Flush cut & normal cut - all in one (2-pieces)z 3400810 66558Holder for 2-piece blade guard (hook) 3400746 47988WSE1621 HIGH CYCLE WALL SAW SYSTEMSHYDROSTRESS WALL SAW MOTORS AND ACCESSORIESItem Description Part # Cat #PPH40RR-460 460 Volt with 12 GPM stage 5802256 06685PPH40RR-575 575 Volt with 12 GPM stage 5802257 12171BS-2 Remote ControlRemote Control Unit for Hydrostress wall saws 5800112 48601HYDROSTRESS TRACKDescription Part # Cat #43” Aluminum/Steel 3402051 6740986” Aluminum/Steel 3402050 6740843” Steel 2500304 0037386” Steel 2500303 00372Track Connector * 3402067 70393HYDROSTRESS TRACK FEETDescription Part # Cat #Aluminum Flat Style for Aluminum Track 3402053 67407Standard Steel for Steel Track 3400480 47702Rotating Track Foot 3401451 02465Rotating Track FootHydrostress TrackBS-2 Hydraulic Remote Control Unit * Indicates blade guards that require blade guard holder: Part # 3400746 * Locks two tracks (2500304 and 2500303 or 3402050 and 3402051) together.
130 Quick Mount· Quick mounting blade flanges make easy removal of blade· Up to 40” maximum starter blade without being in the cutFeed with Worm Drive System· Self-locking-no brake necessary· Improved seals2 Handles· Quick disconnect with 2 handles for fast removal and set up2-stage gear box· Largest ø range in the industry ( ø 32” to 86”)· Safety clutch in front of gear box for better protection· Simple re-engage lever in case of blade jamsPowered by P2® Technology· Integrated permanent magnets· Reduced motor R.P.M. for reliability and low maintenance· High level of efficiency cutting performance6 Speeds/Blade Sizes:32”, 40”, 48”, 63”, 70”, 78”, 86”BLADEMaximum cutting depth 39”Blade size over 60” in diameter requires 60mm flange system (Included with package)Maximum starter blade size 40”Blade mount Quick-release flange DESIGNInfinitely adjustable swivel arm rotates 360°2 carrying handles with locking functionMOTORWater cooled high frequency motor with 2 speed gearboxOutput at 63 amp 26 kW, 35 HPPOWER PACK/INVERTER INPUTVoltage 460 VoltFrequency 50Hz/60 HzOutput Frequency 400 HzWEIGHTWall Saw WSE2226 including feed motors without main drive blade motor 66 lbs.Electric main blade motor only-detachable 53 lbs.MINIMUM GENERATOR SIZE REQUIREMENT 50kWWSE2226 WALL SAW SYSTEMSTECHNICAL DATA86” Blade CapacityElectricFEATURESPart of THE CHOICE SYSTEM
131Complete Wall Saw Cart Assembly and Control UnitWSE2226 WALL SAW SYSTEMDescription Part # Cat #WSE2226 High Cycle Wall Saw System Complete (includes 48“ blade guard, wall saw cart and electric control unit with track) 5801534 46473WSE2226 WALL SAW INDIVIDUAL PARTSAluminum foot for Hydrostress track 3402053 67407Aluminum/Steel track 43” 3402051 67409Aluminum/Steel track 86” 3402050 67408Rotating track foot 3401451 02465WSE2226 ALL IN ONE FLUSH CUT & STANDARD BLADE GUARDS48” Blade Guard Flush cut & normal cut-All in one (3 piece) 3402553 3057356” Blade Guard Flush cut & normal cut-All in one (2 piece) 3401979 7857763” Blade Guard Flush cut & normal cut-All in one (2 piece) 3400102 0144886” Blade Guard Flush cut & normal cut-All in one (2 piece) 3400810 665582 Piece GuardAll-in-One3 Piece GuardWSE2226 Wall Saw Systems
132 • Provides consistent tension and wire speed• Modular saw disassembles quickly into separate pieces• Multiple pulley drive for easy, smooth starting• Patented drive roller system• Fast, easy assembly for a one person operation• Assembles into separate light-weight pieces for easy wall-mounting• Compatible with WSE1621, and hydraulic power unitsHYDROSTRESS® WCE17 & WCH17 WIRE SAWDescription Part # Cat #WCE17 Kit for WSE1621 Wire Saw 5801550 104682WCE17 High Cycle Wire Saw Complete 5801551 105121WCH17 Hydraulic WIre Saw Complete 5801552 105420BS-2 Remote Control Unit (single pump) with 26’ Hoses (for WCH17) 5800112 48601WCE17 & WCH17 WIRE SAWSWCH17HYDRAULICWCE17HIGH CYCLE ELECTRICWire Required 11 feet minimumMax. Wire Storage 41 feetDrive Rollers 6 - 8” rollers, 1-8” diverterWCH17 (Hydraulic)Requirements17-21 GPM Power UnitBS-2 Remote ControlWCE17 (Electric)Requirements 30 kW PowerWeights* 190 lbs. without cover216 lbs. with cover56 Ft. Wire CapacityElectricHydraulicFEATURES TECHNICAL DATAPart of THE CHOICE SYSTEM*Able to be installed on wall in separate, light-weight pieces
133• Patented multiple roll drive allows you to start running with minimum wire tension• Cutting rate increases by 50% compared to conventional systems• Virtually emission free• Capable of large demolition jobsHYDROSTRESS® SB WIRE SAWDescription Part # Cat # ProductWeight (lbs)Complete Wire Saw with 40 CC Motor 5802228 60599 375BS-2 Remote Control Unit (single pump) with 26’ Hoses 5800112 48601 60SB Wire SawWire Required 14 feet minimumMax. Wire Storage 50 feetHeight 52” H x 29” W x 30” DOperation Requirements23-28 GPM Power UnitBS-2 Remote ControlTECHNICAL DATA36 Ft. Wire CapacityElectricFEATURES
134 • Simple and safe in the application with minimum installation time• Economical, replaces expensive drill bits• Wire sawing instead of drilling opens up new application possibilities.• Elliptical shaped cutouts are possible.• Simple tensioning of the wire• Precise flexible water supplyHYDROSTRESS® CC25 CIRCULAR WIRE SAWDescription Part # Cat # ProductWeight (lbs)CCH25 Complete Wire Saw with 22 CC Motor 5802240 74442 296BS-2 Remote Control Unit (single pump) with 26’ Hoses 5800112 48601 60CCE25 Kit for WSE1217 Circular Wire Saw without Main Motor or Controller/Inverter 5803026 67292 340CCE25 Kit for WSE1621 less motor and inverter 5803031 102070 350CCE25 with WSE1621 motor and inverter 5803032 102071 400Plunge Wire Saw Pulley Assembly Features:• Sturdy Design• Gentle Wire guidance thanks to plastic guide• Optimal water guidance guaranteed• Suitable for horizontal and vertical cuts• Swivel rollers for correct wire guidance• Fixed in 10” drilled hole• Wire secured by protective plateHYDROSTRESS® PLUNGE WIRE PULLEY ASSEMBLYDescription Part # Cat #Plunge Wire Saw Pulley Assembly Left Side 3402034 68223Plunge Wire Saw Pulley Assembly Right Side 3402035 68224Universal Transition Pulley 3404027 73394HYDROSTRESS® IDLER PULLEYSDescription Part # Cat #8” Idler Pulley 3400896 73031Idler Pulley Stand 3400895 73030CCH25/CCE25 CIRCULAR/PLUNGE WIRE SAWMin. Diameter 20”Max. Diameter 98”Max. Thickness 24”Wire Requirement 11 feet minimumOperation Requirement13-16 GPM Power UnitBS-2 Remote ControlUniversal Transition PulleysTECHNICAL DATACCE25 Motor & Gear Side98” Maximum DiameterElectricHydraulicFEATURES
135Includes(1) 8ft. column (1) 32” drive wheel, (3) mounting bases (2) 10” wheels, (2) 16” wheels(2) universal clamps(3) 3ft. (1) 11ft., (1) 6ft. schedule 80 pipe sections• No vibration or noise and fast cutting speed• Modular design provides infinite setup options• Universal clamps provide infinite orientation of idler wheels• Bases mount to concrete surface with anchor boltsWS25 WIRE SAWDescription Part # Cat #WS25 Wire Saw for use with BS2 5800061 02248WS25 Wire Saw for use with Control Station 5800669 09484WS25 Flush Cut Wire Saw for Use with BS2 5800621 50169WS25 Flush Cut Wire Saw for Use with Control Station 5800622 39314Wire Saw Control Station 5800059 02247BS-2 Remote Control Unit (Single Pump) with 25’ hoses 5800112 48601BS-2 Hydraulic Remote Control UnitWS25 WIRE SAWWire Speed 0-5,000 ft/min-infinitely variable and reversibleDrive Motor 6 ft. stroke driven by Danfoss 1.93 cubic inch hydraulic motorSawing Angle Set up vertical or horizontal from the same frameDrive Motor Char-Lynn 9.9 cubic inch hydraulic motor 525 rpm @ 25 GPMDrive Wheel 32” diameter with neoprene lining in ‘V’ grooveIdler Wheels10” and 16” special polyethylene wheels with sealed bearings.10” and 16” idlers have 1-3/16” shaft for use with universal clampsPipe Mounting For use with 2” schedule 80 pipeACCESSORIESDescription Part # Cat #16” idler wheel 6020025 0258110” idler wheel 6020035 02583Universal clamp 6020020 02578Pipe mounting base 6020000 0256524” drive wheel 6020051 7933032” drive wheel 6020052 79331TECHNICAL DATAWire Saw Control StationUnlimited DepthHydraulicFEATURES
136 WS30-LE HIGH-CYCLE WIRE SAW• Single 25HP high-cycle Compact electric motor that reduces weight and size versus traditional electric motors• High speed wire cutting that has an adjustable cutting speed up to 25m/s• Single pneumatic cylinder with simple automatic take up and constant tensioning, completely adjustable by the operator• 49 ft (15m) total wire take up• Large storage capacity to make larger cuts without repositioning saw• Single 16.50” poly-lined drive wheel with replaceable poly-liner. Liners available in 4 different grip levels• Load adapter drive wheel to motor connection-reduced load on motor to prolong life• Low entry pull side-reduces danger of broken diamond wire• Fully positionable guide pulleys• Low rolling resistance pneumatic tires for easy maneuvering on rough terrain• Interior spray system allows water to be sprayed directly on drive wheels to cool while cutting• Includes high-cycle, 460V - 7000W control station and hosesWS30-LE WIRE SAWModel #/Description Part # Cat # ProductWeight (lbs)WS30-XLE High Cycle Wire Saw with 400V Control Station 5802297 47462 780Control StationLength 71”Width 30”Height 46”Weight 780 lbs.TECHNICAL DATA39 Ft. Wire CapacityElectricFEATURESStainless Steel Construction
137Hand Held Crimping ToolHT45 Hydraulic Crimping ToolMakes it easy to repair or connect diamond wire more easilyHT45 Crimping Tool Jaws(set of 2 pieces)Measures: 1.100” wide x .355” thick x .830 high Crimp Jaws Only8” Idler PulleyPipe Mounting BaseUniversal TeeUniversal KnuckleWire Saw ClampPlastic Idler Wheel Assembly10” and 16”Screw ConnectorsWIRE SAW ACCESSORIESDescription Part # Cat #HT45 Hydraulic Crimping Tool 1400174 68408HT45 Crimping Tool Jaws 1400297 72310C-12 Hand Held Wire Cutters 1900073 00159Screw Connectors 1400180 51176Wire Connectors 3/8” 1400177 74910Swivel Connectors 1400178 481768” Idler Pulley 3400870 777608” idler pulley with clamp 3400896 73031Universal Tee 6020004 02569Universal Knuckle 6020002 02567Wire Saw Clamp 6020003 02568Pipe Mounting BaseDoes not come with Flange Bolts Part # 2900164 (4 needed per base)6020000 02565Flange Bolts (For Part # 6020000, 6020002,6020003, 6020004) 2900164 01293Wire Saw 7 Wheel (90 degree bracket) 6075128 2150410” Plastic Idler Wheel Assembly 6020035 0258316” Plastic Idler Wheel Assembly 6020025 02581Swivel Crimp Pin Tool (For Pin Removal) 860404 67966Punch Replacement (For Part # 860404) 148130 75678M-2 Wire Saw with Standard Anchor Base 5802248 99915M-2 Large Web Anchor Base for Wire Saw 6020045 45606M-2 Wire Saw:• 6' column • (longer columns available, up to 120\") • Anchor base with wheels• Roller carriage for increased stability• Built-in power travel driven by the hydraulic wire saw motorWire Saw Head:Requires 22-27 gpmRequires BS-2 remoteWIRE SAW ACCESSORIES
138 • Twin 25hp high-cycle compact electric motors: reduces weight and size vs. traditional electric motors• Twin pneumatic cylinder take up: simple automatic take up and constant tensioning completely adjustable by operator• 86’ (26m) total wire take up and storage: Large capacity storage for larger cuts and less down time repositioning saw• Twin 16.50” diameter poly-coated drive wheels: Increases friction on cutting wire• Load adapter drive wheel to motor connection : Reduces load on motor to prolong motor life• Low entry pull side: Reduces danger of broken cutting wire• Low friction, easily positionable wire guide pulley• Fully positionable wire guide pulleys• Multiple positioning/moving options: Load rated lifting rings, integrated for pockets, low resistance free rolling caster• Interior water spray system : Allows operator to choose to spray water directly on idler wheels and cool cutting wire.WS50-LE HIGH-CYCLE WIRE SAWDiamond Wire Page 24-2586 Ft. Wire CapacityElectricFEATURES
139WS50-LE HIGH-CYCLE WIRE SAWModel #/Description Part # Cat # ProductWeight (lbs)WS50-LE High Cycle Wire Saw with Control Unit (Stainless Steel) 5801622 86582 2,040Includes Control Unit and CablesPower 25HP, 460V - 700HzLength 99”Width 33.50”Height 52”Weight 1100 lbs. (Saw), 200 lbs. (Power Panel)TECHNICAL DATAWS50-LE HIGH-CYCLE WIRE SAW
SURFACEFloor StrippersGrinders / PolishersScarifiersBurnishersShot-BlastersTrowel
PREPARATIONCutting BladesDiamond InsertsWet & Dry Resin PadsPolishing PucksLuteus PadsCup GrindersBurnishing Pads and More
142 FLOOR STRIPPERS TMCPST1015E1L (OX)CPST1015E1XL (MULE)Voltage / Frequency 120V - 1PH, 60 HzPower 1.5 HP ElectricCurrent Consumption 9A (Ox) 16A (Mule)Speed (drive motor) 2820 RPMApplication Scraping / StrippingLength 33” (Ox), 30” (Mule)Width 13” (Ox), 20” (Mule)Height 38” (Ox), 43” (Mule)TECHNICAL DATA10” Strip WidthElectric• Ram action stripping power is provided by a powerful, dedicated motor• Adjustable blade angle• Inboard weight are removable and adjustable to three positions, ensuring maximum blade pressure for difficult removals• Height-adjustable and vibration dampened handle with stable lifting pointsFEATURES:CPST1015E1L FLOOR STRIPPERModel # Part # Cat # Product Weight (lbs)CPST1015E1L (Ox) 5802009 113765 106CPST1015E1XL FLOOR STRIPPERModel # Part # Cat # Product Weight (lbs)CPST1015E1XL (Mule) 5802010 113766 26910” Strip WidthElectric• Unique self-propulsion can be used either manually, or in automatic mode• Ram action stripping power is provided by a powerful, dedicated motor• Adjustable blade angle• Inboard weight are removable and adjustable to three positions, ensuring maximum blade pressure for difficult removals• Height-adjustable and vibration dampened handle with stable lifting pointsFEATURES:Enables the peeling and removal of carpets, vinyl floors and many other floor coverings.
143TM FLOOR STRIPPERSCPST1415E1 (BULL)• Direct drive manual or auto travel• Forward weight helps with material removal• Height-adjustable• Protective cover helps prevent flying pieces• Integrated weights adjustable to 3 positions• Ergonomically designed handle barsCPST1415E1 FLOOR STRIPPERModel # Part # Cat # Product Weight (lbs)CPST1415E1 5802006 112185 51813.77” Strip WidthElectricVoltage / Frequency 110V / 60 Hz / 16.4APower 1.5 HPCurrent Consumption 16.4 AmpSpeed (drive motor) 2820 RPMApplication DryLength 30.7”Width 19.68”Height 43.7”TECHNICAL DATAFEATURES:Directly driven impact mechanism with low maintenance and reliable performance.Ergonomically designed handle bars with control unit including dead man’s switchSTRIPPER ACCESSORIESDescription Part # Cat #Blade Bull - U-Shape Sharp 350x80x1.5mm 2509451 113585Blade Bull - 350x130x1.5mm 2509452 113586Blade Bull - 350x80x1.5mm 2509453 113587Blade Bull - 350x80x2.5mm 2509454 113588Blade Bull/Mule/Ox - 250x80x1.5mm 2509797 113589Blade Bull/Mule/Ox - 250x80x2.5mm 2509798 113590Blade Bull - U-Shape 350x80x1.5mm 2509805 113591Chisel 25mm 2509449 113592Chisel Holder 2509448 113593Carpet Cutter Holder 2509806 113594Carpet Cutter 2509807 113595Blade BullCarpet CutterBull Chisel & HolderEnables the peeling and removal of carpets, vinyl floors and many other floor coverings.
144 GRINDERS / POLISHERS TMCPG815E1 (ALPHA)Voltage / Frequency: 115V - 1PH, 60 HzPower: 1.5 HP ElectricCurrent: 15 AmpSpeed (drive motor): 1290 RPMApplication: Floor grinding & polishing Grinding Speed: 600 rpm Grinding Disc: 1 x 13” Grinding Width: 482.6 mm / 19”Weight: 95 lbs.TECHNICAL DATA• Removable dust shroud allows you to grind flush to the wall• Wide range of tooling available for grinding and coating removal• Utilizes the Core Lock PRO diamond segment retention system for fast and efficient changes• Handle folds within seconds for easy transport• Flexible drive coupling9” Grind WidthElectricFEATURES:CPG815E1 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG815E1 1.5HP, 115V 1PH 5802008 113768Description Part # Cat #Water Spray Kit for CPG815E1 (ALPHA) 2509923 117831
145TM GRINDERS / POLISHERSCPG1300CPG180013” Grinding WidthElectric• Single grinding head for smaller areas• Quick change from grinder to edger• Can be used with 3, 6, or 9 metal, ceramic, or resin bond diamond tools• Separates into two pieces for easy transport• Single or variable speed• Weight kit includedFEATURESCPG1300 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG1315E1 115V, 1PH variable speed 5802014 114774CPG133E1 230V, 60Hz variable speed 5802013 11477118” Grinding WidthElectricTECHNICAL DATAModel #: CPG133E1 CPG133E3Voltage: 115V 1PH 230V 1PHMotor Power: 1.5 hp 3 HPCurrent: 15 Amp 12 AmpGrinding Speed: 200-500 rpm 300-750 rpmGrinding Disc: 1 x 13” 1 x 13”Grinding Width: 330 mm / 13” 330 mm / 13”Weight: 186 lbs 186 lbsTECHNICAL DATAModel #: CPG1815E1 CPG183E1Voltage: 115V 1PH 230V 1PH Motor power: 1.5 hp 3 HPCurrent: 15 Amp 12 AmpGrinding speed: 200-500 rpm 300-750 rpmGrinding disc: 3 x 6” 3 x 6”Grinding width: 457 mm / 18” 457 mm / 18”Weight: 260 lbs 260 lbs • Single grinding head that allows you to grind close to a wall• Adjustable speed depending on your surface• Versatile grinding/polishing of plank flooring, parquet, or concrete• Large selection of heads can be mounted depending on the surface• Separates into two compact pieces that can be easily transported• Weight kit includedFEATURESCPG1800 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG1815E1 115V, 1PH 15 Amp variable speed 5802016 114639CPG183E1 230V, 1PH, 60Hz variable speed 5802015 114638
146 GRINDERS / POLISHERS TMCPG2000CPG2600TECHNICAL DATAModel #: CPG205E1 CPG205E3Voltage: 230V, 1PH 480V, 3PHMotor Power: 5.5 HP 5.5 HPCurrent: 30 Amp. 16 Amp.Grinding Speed: 250-1150 rpm 250-1150 rpmGrinding Disc: 3 x 6.5” 3 x 6.5”Grinding Width: 20” 20”Weight: 403 lbs 403 lbsWater Tank: 5 gallons 5 gallonsCPG2000 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG205E1 5.5HP, 230V - 1PH 5802037 114731CPG205E3 5.5HP, 480V -3PH 5802017 114739• Great for the rental market and small to medium sized jobs• Able to fit into small spaces and great for grinding terrazzo• Variable speed for grinding and polishing different materials• Water tank eliminates the need for an external water source• Flex head system that reduces vibration• Low maintenance due to smooth operation• Weight kit included • High torque motor20” Grind WidthElectricFEATURES:TECHNICAL DATAModel #: CPG265E2 CPG2610E2Voltage: 230V 1PH 230V 1PH/3PHMotor Power: 5 HP - 6 pole 10 HP - 6 poleCurrent: 30 Amp 30/50 AmpGrinding Speed: 350-1100 rpm 350-900 rpmGrinding Disc: 3 x 8.5” 3 x 8.5”Grinding Width: 26” 26”Weight: 705 lbs 705 lbsGrinding Pressure: 396 lbs 396 lbsCPG2600 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG265E1 5HP, 230V - 1PH 5802018 114673CPG2610E2 10HP, 230V - Dual Phase 1PH/3PH 5802036 11475626” Grind WidthElectric• Heavy-duty design for both residential and commercial applications• Patented planetary system to drive 3 heads• Double-sided cog belt and gear to help reduce torque and stress on the operator• Water connection valve for wet grinding• Industrial grade components designed for durabilityFEATURES:
147TM GRINDERS / POLISHERSCPG2600 PROPANECPG280026” Grind WidthPropane• Heavy-duty design for both residential and commercial applications• Patented planetary system to drive 3 heads• Double-sided cog belt and gear to help reduce torque and stress on the operator• Water connection valve for wet grinding• Industrial grade components designed for durability• Propane vapor drawFEATURES:TECHNICAL DATAModel #: CPG2618PEngine Power: 18 HPPropane Tank: 5 gallon / 20 lbs LPGrinding Speed: 600-960 rpmGrinding Disc: 3 x 8.5”Grinding Width: 26”Weight: 842 lbsWater Tank: 5 gallonsCPG2600P GRINDER / POLISHERModel # Engine Type Part # Cat #CPG2618P 18 HP Kawasaki Propane Conversion 5802019 11469628” Grind WidthElectric• The operator can easily control the speed• Ergonomic with a minimal load and no vibrations for the operator• Equipped with a smart display• Service is easy – loosen three screws to get access to the machine house• Quick-release wheels• The cooling system is sealed and protects the electrical components against heat and dustFEATURES:CPG2800 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG2810E2 230V, dual phase 3PH 5802021 114787CPG2810E3RC 480V, 3PH (remote) 5802022 114788TECHNICAL DATAModel #: CPG2810E2 CPG2810E3RCMotor Power: 10HP, 32amp 10HP, 32ampVoltage: 230V 480VCurrent: 32 amp 32 ampGrinding Speed: 200-800 rpm 200-800 rpmGrinding Disc: 3 x 8.6” 3 x 8.6”Grinding Width: 28” 28”Weight: 1,212 / 1,344 lbs 1,212 / 1,344 lbsWater Tank: 5 gallons 5 gallons
148 GRINDERS / POLISHERS TMCPG3000CPG320030” Grind WidthElectric32” Grind WidthElectricCPG3000 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG3010E3 480V, 3PH 5802020 114810CPG3010E2 230V, 1PH or 3PH Dual, high torque 5802035 114598CPG3200 GRINDER / POLISHERModel # Motor Type Part # Cat #CPG3220E3 (480V) 480V, 3PH 5802023 114599CPG3215E3 (230V) 230V 3PH 5802024 114802CPG3220E3RC (480V) remote 480V, 3PH 5802025 114546CPG3215E3RC (230V) remote 230V 3PH 5802026 114803TECHNICAL DATAModel #: CPG3010E3 CPG2010E2Motor Power: 480V, 3PH 230V, 1PH/3PH high torqueCurrent 16 Amp 32/50 AmpGrinding Speed: 250-1150 rpm 250-1150 rpmGrinding Disc: 3 x 11” 3 x 11”Grinding Width: 30” 30”Weight: 820 lbs. 820 lbs.Water: Hose connection Hose connectionTECHNICAL DATAModel #: CPG3210E3 CPG3215E3RCCPG3220E3RC with remoteMotor Power: 230V or 480V 230V or 480VCurrent: 32 Amp or 20 Amp, 50-60Hz 32 Amp or 20 Amp, 50-60HzGrinding Speed: 200-825 rpm 200-825 rpmGrinding Disc: 3 x 11” 3 x 11”Grinding Width: 32” 32”Weight: 1,212 lbs. 1,410 lbs.Water Tank: 5 gallons 5 gallons• Suitable for both residential and commercial applications• Optimal for polishing, grinding, and removing thick coatings• Equipped with three grinding heads (11” in diameter) cast in one solid piece• Folding handle for easy transport and storage• Powered by a patented system with double-sided timing belt and gear ring• Reinforced bearings, shafts, and drive belts for high performanceFEATURES:• Easy to use remote control• The operator can easily control the speed• Ergonomic with a minimal load and no vibrations for the operator• Equipped with a smart display• Service is easy – loosen three screws to get access to the machine house• The wheels on the machines are 14-1/2” and can quickly be released• The cooling system is sealed and protects the electrical components against heat and dustFEATURES: