AW-1_E-book(A4)-RSPM_120665

We carry out pump & motor maintenance and service for :

OIL & GAS CHEMICAL INDUSTRIAL POWER WATER

1. Retrofitting

If you have an aging pump, motor, gearbox you can make it new again with our retrofitting solutions. Our retrofit services
give your pump a second life. It helps to reduce operational costs, improve reliability, and enhance the performance of the pump.
Our retrofit solutions work well for all pumps - and for all pumps regardless of their age and type. Benefits of Retrofitting:

- Enhance the reliability of old pumps
- Reduce maintenance costs
- Minimize operational costs
- Increase pump efficiency
- Maximize revenue

2. Repairing and Overhauling

Our repairing and overhauling services are suited to all industrial verticals like:
- Oil and Gas - Off Shore and On Shore
- Process and Refining
- Power Generation
- Mining Water Supply & Water Treatment Plants
- Sewage Plant
- Cryogenic liquid gas
- Food manufacturing
- Paper manufacturing
- Sugar industry
- Water and wastewater industry
- Chemicals, etc.

We also help you source replacement by authentic genuine or difficult to find parts. We can also coat the inside of
pumps to suit your specific requirements. Once the pump is overhauled, we re-install it at your premises. We follow the right
installation procedures to ensure that your pump runs efficiently, with low component wear and tear and longer durability.

3. Field Services

We offer removal and installation of industrial pumps, tackling emergency breakdowns, laser alignment, starting troubles,
performance testing, and fault diagnostics as well.

4. Fabrication and Equipment Monitoring

We offer various equipment fabrication services like - coupling, impeller trims, surface refurbishing, sleeve bearings, brass
bushings, pump shafts, and sleeves, etc. We also increase the life of your pumps by balancing each element individually, thereby
limiting shaft deflection.

5. Industrial Coatings

Coatings are an economical way to increase the lifespan of pumps without costly repairs and replacements. It helps to
restore the physical and mechanical properties of your worn-down pumps.

GEAR

- Dismantle, remove part, inspection, PT test, replace bearing
and oil seal, adjust gear tooth contacts, backlash and shaft endplay,
re-assembly, no-load test and service report

MOTOR AC

- Overhaul, re-winding, dynamic balance, replace bearing,
vibration check, re-installation/assembly, re-alignment, vibration check
and service report

MOTOR DC

- Overhaul, re-winding, turning and under-cutting commutator,
dynamic balance, replace bearing, vibration check, re-installation/
assembly, re-alignment, vibration check and service report

PUMP SERVICE

- Overhaul, dynamic balance, replace bearing, replace seal and mechanical seal,
base plate fabrication, shop performance test, re-installation/assembly, re-alignment,
vibration check and service report

PUMP PERFORMANCE TEST

Example Test Report

Machine

1) Load Test Bed :
• Flow < 10,000 m3/hr
• Pressure < 100 bar
• Power up to 500 kW
• Pit volume 150 m3
• Fulfill ISO 9906 requirement

2) Dynamic Balance Machine: 3) Hydraulic Press Machine:
• Capacity 10 tons • 100 tons

4) Vacuum Pressure Impregnate 5) CNC /Milling Machine
(VPI) Machine:

Tools

• Spectrum analyzer and Field • Vibration analyzer 5 sets • Laser alignment 5 sets
balance on blower 3 sets

• Coating thickness gauge • Leakage Test / Hydro Test:

• Surge tester 1 set

• Oil injector (SKF) • Ultra-sonic flow meter • Power analyzer

• Sound level meter • Thermoscan

BLOWER

- Overhaul, dynamic balance, replace bearing, replace seal, coating
mpeller, replace bearing, welding, repair and reverse engineering,
PT check, re-installation/assembly, re-alignment and on-site field balance,
vibration check and service report

Rakescreen & Floodgate

- Overhaul, replace bearing, replace seal, welding, repair and
reverse engineering, PT check, re-installation/assembly, vibration check
and service report

SPECIFICATION
- Flow < 10,000 M3/Hr
- Pressure < 100 bar
- Power up to 500 kw
- Pit volume 150 M3
- Fulfill ISO 9906 requirement

How to Reach Us?
We'd love to hear from you. If you require any of the services listed here or other pump-related
services, get in touch with us by or giving us a ring at +66-2-5094145. You
can also follow us on Facebook Instagram or LinkedIn to see all that's new happening at RSPM.

บรษิ ัท อาร์เอสพีเอ็ม ปั๊ม แอนด์ มอเตอร์ เซอร์วิส จาํ กดั
RS PM PUMP AND MOTER SERVICES CO.,LTD.
8/1 ม.4 ต.บึงทองหลาง อ.ลาํ ลูกกา จ.ปทมุ ธานี 12150
Tel : (+662) 509-4144 Fax : (+662) 509-4145

OUR PUMPS & MOTOR SERVICE Motor
- Dynamic Sealing Pumps
- Torque Flow Pumps - Submersible pump - AC Synchronous Motor (LV-HV)
- Process Pumps
- Vertical Sump Pumps - Vacuum pump - AC Induction Motor (LV-HV)
- Split Casing Pumps Double Suction
- Split Casing Pumps Single Suction 2 Stage - Vertical turbine - AC Electric motor brake
- Horizontal Mixed - Flow Pumps
- Multistage High Pressure Pumps - End suction pump - DC Motor

- Concrete volute pump - Gear Motor

- Generator

- Explosion proof motor

- Slip ring motor

- Traction motor

- Rake screen - Flap Valve

- Foundation Baseplate