Use the Bonastre concrete polishing pads

Polished concrete comes in many options and has a mirror shine
finish to it. This natural shine can get faded really soon. As
concrete is used more than any type of flooring. Due to its
durability and low costing, this calcite type flooring can be used
in common areas of work, schools, in the exteriors of a residential
property, and so on. As concrete is also a calcite substance and
can get scratched really soon. As the hardness level is low, the
right concrete polishing pads must be considered.

The polishing is a multi-step procedure demanding use of the
correct tools and gear to accomplish top-quality results. To help
you get started, here's a brief overview of the polishing process
and a checklist of basic equipment.

The best method of concrete polishing is to use chemical-free
equipment as the concrete floor be it a polished concrete
flooring or a normal one can be easily damaged.

The Bonastre Pro pads can be used in this process:

• Polishing concrete is very parallel to sanding wood.
Machines armed with diamond dust induced in them, are
used to grind down concrete surfaces to the desired degree
of shine and smoothness. As when sanding wood, you
gradually progress from coarser-grit to finer-grit abrasives.
(In this case, grit is the particle size of the diamond.) The
result is a glossy, mirror-like finish.

• These diamond abrasives are coarse enough to remove
minor pits, blemishes, stains, or light coatings from the floor
while preparing the floor for final smoothing. Depending on
the condition of the concrete, this preliminary rough
grinding is generally a three- to four-step process.

• During the polishing procedure an internal impregnating
sealer is applied. Like the Novamarmol Powder and Liquid.
The sealer sinks into the concrete and is invisible to the
naked eye. It not only protects the concrete from the inside
out, it also hardens and densifies the concrete. This
eliminates the need for a topical coating, which reduces
maintenance significantly versus if you had a coating on it.
Some contractors spread a commercial polishing
compound onto the surface during the final polishing step,
to give the floor a bit more sheen. These compounds also
help clean any residue remaining on the surface from the
polishing process and leave a dirt-resistant finish.

• The Bonastre Pro pad comes in set that can be used as per
the condition of the floor and its thickness. Many concrete
floors may require only honing or refining before the
polishing step. The Bonastre pro pads can be used either
ways.

Each job will pose different conditions and challenges, so be sure
to consult with your equipment and material suppliers for

recommendations as to the products best suited for your
application.

The concrete polishing pads come in standard and use only
water to polish away the scratches, blemishes and cuts. The long-
gone shine can be retrieved with the use of the bonastre system.

Invest in the Bonastre Pro Pads and Shop now:
https://www.amazon.in/dp/B08C5WY34B
or Enquire now:
Or to enquire further: call: +91 98710 07991
visit: http://floorcareco.in/