TRONEX Precision Cutters & Pliers

LEADER IN CUTTING TECHNOLOGY
FOR OVER 25 YEARS

ATT AmericanTool (Thailand) Co.,Ltd. Tel: +662 9390524-6 Fax: +662 939 0533
www.americantoolthailand.com LINE@AmericanToolTH
AmericanTool-Thailand
[email protected] ID: @beb5530k

WHY BUY TRONEX?

• MADE IN THE USA

• TOP PERFORMANCE,
HIGH QUALITY AND VALUE

• CHOICE OF HANDLE LENGTH:
STANDARD & ERGONOMIC

• OVER 100 MODELS FOR:
ELECTRONICS
TELECOMMUNICATIONS
WIRE HARNESS
MEDICAL DEVICE

6 REASONS WHY

TRONEX IS THE BEST IN THE WORLD

1 SUPERIOR CUT TING PERFORMANCE
• Cut hundreds of thousands of times before dulling.
• Cut hundreds of thousands of times after resharpening.
• Cut crisply at the very tip and cut along the entire length of the cutting edges.
• Cut in confined areas.
• Cut wire and leads that are thinner than a human hair.
• Cut extremely flush with no burrs.

2 100% QUALITY ASSURANCE
Every Tronex cutter is checked individually at the factory. Tronex warrants every tool to be
free of defects in material and workmanship for the life of the tool.
3 UNIQUE DESIGN
Nreustisist hviegrhy csutrtotinngg,ltooaudgsh. and hardened to
wDeelarrinawndasrheedruecleims ifnriactteiosnmetal-to-metal
mMaettachl-etod-mbeetaarlincgonritnagcst minimize
pScerrefewctwfaithctfoinrye-speitttcinhged threads for

2
Tronex Factory in Fairfield, California, USA

4 CHOICE OF HANDLE LENGTH
Handles of all Tronex cutters are made of steel that extend
the entrie handle length to give strength and balance to
the tool. All Tronex models are available in standard
handle length (2.9”/74mm) or in long ergonomic handle
length (3.9”/99mm).

5 CUSHION GRIPS
All Tronex cutters have double cushion grips 3.9”
surrounding the steel handles. These comfortable
grips have a no-slip surface and are made 2.9” LONG
ERGONOMIC
6 from static dissipative material to be STANDARD
ESD safe.
QUALITY MANUFACTURING IN THE USA

Tronex CNC machine produces high
tolerance parts.

Surface grinding at Tronex insures
exceptionally sharp cutting edges.

Every Tronex cutter is checked
individually for top cutting performance.

SELECTING A CUT TER MODEL

CHOICE OF EDGE FINISH RAZOR FLUSH® DESIGN

SEMI-FLUSH : Small edge bevel to cut thicker wire - Machine ground to make edges
and leads. Greatest resistance to dulling. Will razor sharp with perfect alignment.
leave a “pinch” in the middle of the end of material - Wire or leads cut will be left with
being cut. no raised surface or “pinch” .
- Have a fine set screw stop built into
FLUSH : Very thin edge bevel that leaves only an the handle or jaw of the cutter to
exceptionally small “pinch” in the middle of the prevent these exceptionally sharp edges
end of the material being cut. Good compromise from fulling themselves,
between Semi Flush และ Razor Flush edge finishes. even when an
operator applies
® a strong cutting force.
tcoRoruAgtZFteOelutrRhsoehFprL.eeUDdrSaugHtleel®fsfai:nlsiikNtseehor.ttewhdoagnreaczbuoetrtveberlsla, dwneoitsh“pcSioenmmchiin”Fglush

Razor Flush ® is a registered trademark of Tronex Technology, Inc.

CUTTERS

Choose the Right Cutters for You.

CUTTERS Standard Long
Ergonomic
Made in the USA
Made of high grade carbon steel
Comfortable cushion grips with stainless
steel leaf springs
Bearing ring lap joint design provides
superior performance to other cutters
made with rivet joints or box joints.
Each cutter individually checked and tested
ESD safe

Page I-1

CUTTERS

Oval Head Cutters

MINI OVAL CUT TERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm Flush 0.1.30m80m4-1”6--1A.0.2W459Gm” m
.28” 5312
(7.1mm)

.26”
(6.6mm)

MINI OVAL Miniature oval head cutters are used
for fine cutting work, such as with SMT,
.16” 16° or work under a microscope.
(4.1mm)

.04”
(1.0mm)

OVAL HEAD CUTTERS OVAL CUT TERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm Flush 0.1.3505m06-m1”6-- A.10.W4295G”mm
.37”
(9.5mm)

.33” 5112
(8.4mm)

OVAL Oval head cutters are extremely popular.
Used for general purpose cutting.
.23” 16° Strong. Versatile.
(5.9mm)

.04”
(1.0mm)

LARGE OVAL CUT TERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm Flush 0.1.30550m6-1m”5--A.01W5.45Gm” m
.41”
(10.5mm)

.53” 5522
(13.4mm)

LARGE OVAL RELIEF These cutters have more head material
for greater cutting capacity.
.13” General purpose.
(3.4mm)

.05” 16°
(1.2mm)

Page I-2

CUTTERS

Taper Head Cutters

MINI TAPER CUT TERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm Flush 0.1.30m80m4-1”6--1A.0.2W459Gm” m
.28”
(7.1mm) 2.9”/74mm Razor Flush® 0..3108m04-m2”1-- A.00.W278mG”m

.28” Mini 5412
(7.1mm) Taper

Mini 5423
Taper
Relief

MINI TAPER MINI TAPER RELIEF

.24” Used only for exceptionally .13”
(6.1mm) fine cutting work when (3.4mm)

access to the cutting area
16° is difficult. .03” 16°
.04”
TAPER HEAD CUTTERS (1.0mm) (0.7mm)

TAPER CUT TERS

.37” Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
(9.5mm) 2.9”/74mm 0.1.530m50-6m1”6--A.10W.42G95”mm
Flush 0.1.30m80m4-1”9--1A.0.0W451Gm” m
.33” Taper 5212 2.9”/74mm Flush
(8.4mm)

Taper 5222
Relief

TAPER Pointed head allows for TAPER RELIEF
increased cutting access .13”
.23” yet has sufficient strength (3.4mm)
(5.9mm)

to avoid tip breakage when
16° used within its capacity. 16°
.04” .04”
(1.0mm) Most popular cutters. (1.0mm)

LARGE TAPER CUT TERS

.41” Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
(10.5mm) 2.9”/74mm 0.1.30550m6-1m”6--A.01W4.27Gm” m
Flush
.53” Taper 5722
(13.4mm) Relief

LARGE TAPER RELIEF Extra long jaw for possibly cutting
multiple leads.
.13”
(3.4mm)

.05” 16°
(1.2mm)

Page I-3

CUTTERS

Tip Cutters

MINIATURE HIGH RELIEF TIP CUT TER

Tip cutter with deep relief for an Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
exceptionally low profile. Short sturdy jaw. 2.9”/74mm 0.1.30m80m4-2”2--0A.0.6W255Gm” m
Razor Flush® cutting edges. 5049 Razor Flush ®

.17” .10” 16°
(4.4mm) (2.5mm)

.17” (1.m04m” )
(4.4mm)

.59”
(15mm)

SMALL TIP CUT TER Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0..3108m04-m2”0-- A.00.W381mG”m
Most popular tip cutter. 5070 Razor Flush ®
Jaw is twice as long as jaw of 16°
standard cutters. Jaw is slim with
a low, relieved profile.
Razor Flush ® cutting edges.

TIP CUTTERS .22”
(5.5mm)

.20”
(5mm)

.91” .06”
(23mm) (1.5mm)

SUB-MINIATURE TIP CUT TER

SMT cutter. Extraordinarily small, fine Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
cutting edges & fine tip. Often used 2.9”/74mm Razor Flush ® 0.0.40500m-22m”6--A.00W1.4G6m” m
under a microscope. Removes 5071
individual leads from fine pitch
components. Razor Flush® (3..123m” m)
cutting edges. .13”
(3.2mm)

.55” 16°
(14.mm)
.02”
(0.6mm)

RUGGED TIP CUT TER Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0.1.30360m-51m”8-/-A.01W3.29Gm” m
Same as the sub-miniature model 5088 Razor Flush ®
except wider jaw and wider tip
fRoarzeoxrtrFaludsuhr®abciulitttyin. g edges.

.22”
(5.5mm)

.25”
(6.3mm)

.91” .06” 16°
(23mm) (1.5mm)
Page I-4

CUTTERS

Angulated Cutters

LARGE 50o CUTTER

Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0.3.0220m-81m”8-A-.31W9mG0m”
5072 Flush

RLleaoarbdgusessitnt. caEuxsttciinneggllleehncetauindt..cRuettliinegvesdevfoerraelnhanced visibility. .29”
(7.4mm)

.71” .31” 50°
(18mm) (7.9mm)

MINIATURE 50o CUTTER

ANGULATED CUTTERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0.1.30m80m-42”2--0A.0.W625G5m” m
5075 Flush

hAenaSdM. TUcseutdtefrowr eitxhcaepvteiorynasmllyaflilnceucttuinttging. .16”
Relieved for maximum accessibility. 4.1mm

SMALL 50o CUTTER .71” .16” 50°
(18mm) 4.1mm

Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0..130m20-8m2”0--A.00W.38G0m”m
5082 Flush

Most popular angulated cutter. .22”
eSxmcaellllecnutttvinisgibhileitayd. wDiuthrarbeilliietyf cfoormbined (5.6mm)
with fine cutting.
50°
SMALL 50o POINTED CUTTER
.71” .22”
Model# (18mm) (5.6mm)

5080 HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0..130m20-8m2”0--A.00W.38G0m”m
Flush

pNacoeciwnetesasdnigbtiuipliltaywtehindictochucatotllenorfwinwseitdfhoraarmevaaexsryi.mum .22”
(5.6mm)
Page I-5
50°

.71” .22”
(18mm) (5.6mm)

Angulated Cutters

CUTTERS AT 50, 70 AND 90 DEGREES

Most precision hand cutting
tools have cutting edges at
a 15 to 20 degree angle.
However, a much greater angle
may be desired when access to
the object being cut is very
limited or when the work area
is very crowded.

SMALL 70o CUTTER

ANGULATED CUTTERS Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0.2.30m20m-82”2--0A.0.W625G5m” m
5083 Flush

haAenngaSdleMawTlliotchwuasttesvrpe. erySctfieaineleapcc7cu0ettosinsg. .16”
(4mm)
LARGE 50o POINTED CUTTER
70°
Model#
.55” .17”
5004 (14mm) (4.4mm)

HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
2.9”/74mm 0..230m20-8m2”0--A.00W.38G1m”m
Flush

Lwfoairtrhegnephocainunttcetinedgdtipecdo. ngSterhool.rt jaw .05” 50°
(1.2mm)
MINIATURE 90o CUTTER .33”
.52” (8.4mm)
Lmeinodinhngiigeag,sthuvlaryeetrceyoonpnndpafironprseoeidwrnmgajiartcewcuautwstti.tniitnhgg (13.2mm)

Page I-6 Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety) N/A
2.9”/74mm 0.2.30m20m-82”2--0A.0.W625G5m” m
5074 Flush

.18”
(4.5mm)

.71” 90°
(18mm) .08”
(2mm)

CUTTERS

Extra large Cutters / Long Heavy Duty Cutter

EXTRA LARGE OVAL CUT TERS

Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
0.2.0391m0-1m”2--A.02W8m0Gm”
.61” .675” 2.9”/74mm Flush 0..2309m10-m1”4-- A.10.W660mG”m
(15.5mm) (17.1mm)

5612

STAINLESS STEEL CUT TERS / LONG HEAVY DUTY CUT TERS 5613 2.9”/74mm Razor Flush®

.3”
(7.6mm)

16°

Able to cut confidently through heavy duty wire,
our extra large oval is popular for a variety of
applications and industries. Option of Razor Flush®
allows for extremely flush cutting.

This cutter has a longer and wider cutter head

which permits an expanded cutting capacity.

LONG HEAVY DUTY CUT TERS

Spring .6” Model# HaSndtalendLaerndgth Cutting Edge C(suotfttincgopCpaerpawciriety)
Retention (15.3mm) 2.9”/74mm 0.2.0391m0-1m”2--A.02W8m0Gm”
Device • .78” 5812 Flush

(19.7mm)

• .39”
(9.9mm)

25°

This cutter, forged of carbon steel, has strength in the
head and joint areas needed to cut heavier gauge
wire or cable. Cushion grips provide operator comfort.
A jaw restraining device is attached to insure spring
retention.

Wire harness and jewelry

making are popular applications
for our heavy duty cutters.

Page I-7

PLIERS

Pick Your Perfect Pliers.

PLIERS

Made in the USA
Made of special alloy steel
Comfortable cushion grips with stainless
steel leaf springs
Bearing ring lap joint design provides
superior performance to other pliers
made with rivet joints or box joints.
Each pliers individually checked and tested
ESD safe

Page I-8

PLIERS

Precision Pliers

CHAIN NOSE PLIERS Slightly Rounded .05” Model# HaSndtalendLaerndgth
Inner Edges • (1.2mm) 724.m9”m/
1.30” .06” 511
(33mm) Smooth Jaw (1.5mm) HaSndtalendLaerndgth
Serrated Tips 724.m9”m/
Model#

Serrated Tips 512

CHAIN NOSE SHORT JAW .05” Model# HaSndtalendLaerndgth
(1.2mm) 724.m9”m/
.75” 513
(19mm) .06”
PRECISION PLIERS (1.5mm)
Induction Hardened Tips

(60HRC)

Chain nose pliers are commonly used in electronic assembly and rework.
They are also used in fine jewelry work. Tronex chain nose pliers can have either
smooth inner jaw surfaces or have serrations at the tips of the inner jaw.

Recommended Gauge Usage: 16 gauge (1.29mm)
Recommended Tip Gauge Usage: 18 gauge (1.02mm)

ROUND NOSE PLIERS

Model# HaSndtalendLaerndgth
724.m9”m/
.035” 531
(0.9mm)

.07”
(1.8mm)

1.25”
(31.7mm)

ROUND NOSE SHORT JAW

.03” Model# HaSndtalendLaerndgth
(0.7mm) 724.m9”m/
532
.06”
.715” (1.5mm)
(18.1mm) Induction Hardened Tips
(60HRC)

Round nose pliers are used in electronics and in jewelry making, primarily for making loops. Page I-9
Long jaws allow for broader range of loop diameters.
Short jaws provide increased stiffness at the tips to resist

deformation when working with heavier gauge wire.
This tool creates loops 1mm - 4mm diameter.

Recommended Gauge Usage: 20 gauge (0.8mm)
Recommended Tip Gauge Usage: 22 gauge (0.6mm)

PLIERS

Precision Pliers

FLAT NOSE PLIERS Slightly Rounded Model# HaSndtalendLaerndgth
Step Tip Inner Edges •

1.25” .15” 541 724.m9”m/
(31.7mm) (3.8mm)
.06”
(1.5mm)

aFnladt nreowseorpkl.ieIrtsisaraelscooumsmedoninlyfiunseejdewineelrlyecwtororkn.icTshaessTeromnbelxy
flat nose plier features a very fine tip, smooth jaws and slightly
rounded inner edges.
Recommended Gauge Usage: 18 gauge (1.02mm)

FLAT NOSE WIDE TIP .25” Model# HaSndtalendLaerndgth
(6.3mm) 724.m9”m/
1.25” 542
(31.7mm)
PRECISION PLIERS .0066” ”
Step Tip ((11..55mmmm) )

A wider tip (6.3 mm) for more control.
Recommended Gauge Usage: 16 gauge (1.29mm)

LONG NO STEP FLAT NOSE PLIERS Slightly Rounded Model# HaSndtalendLaerndgth
Inner Edges •
1.25”
(31.7mm) .15” 543 724.m9”m/
(3.8mm)
.06”
(1.5mm)

A long, smooth jaw without the step at the tip.
Extended reaching capability with a long, thin nose.
Recommended Gauge Usage: 16 gauge (1.29mm)
Recommended Tip Gauge Usage: 20 gauge (0.8mm)

SHORT NO STEP FLAT NOSE PLIERS

.80” .15” Model# HaSndtalendLaerndgth
(20.3mm) (3.8mm) 724.m9”m/
544
.04” (1mm)

Induction Hardened Tips
(60HRC)

These very popular pliers offer exceptional leverage with shorter blades.
Tips have been heat treated for exceptional hardness.

Recommended Gauge Usage: 16 gauge (1.29mm)
Recommended Tip Gauge Usage: 18 gauge (1.02mm)

Page I-10

PLIERS

Precision Pliers

BENT NOSE PLIERS FINE TIPS Slightly Rounded Model# HaSndtalendLaerndgth
Inner Edges •
60°
.85” .43” .07” 551 724.m9”m/
(21.6mm) (10.9mm) (1.8mm) LHoanngdElergLoennogmthic
.07” Model#
(1.8mm)

751 939.m9”m/

Bent nose pliers are used in electronics where they are often used
in place of tweezers. Fine tips on Tronex bent nose pliers provide
exceptional access. Bent nose pliers are also used in jewelry making.
RReeccoommmmeennddeedd GTiapuGgeauUgseaUges:ag1e8:g2a2uggeau(g1e.02(0m.6mm)m)

BENT NOSE PLIERS STURDY TIPS

PRECISION PLIERS Slightly Rounded Model# HaSndtalendLaerndgth
Inner Edges • 724.m9”m/
.43” .09” 552
(10.9mm) (2.2mm)
.80” .85” .09”
(20.3mm) (21.8mm) (2.2mm)

These bent nose pliers offer the same popular shape as our other bent nose
pliers but with wider jaws and larger tips (2.2mm) for usage with heavier
gauge wire but still allow for exceptional access to confined spaces.

Recommended Gauge Usage in the Bend: 12 gauge (2.05mm)
Recommended Tip Gauge Usage: 20 gauge (0.8mm)

NEEDLE NOSE PLIERS Slightly Rounded Model# HaSndtalendLaerndgth
Inner Edges • 724.m9”m/
1.25”
(31.7mm) .04” 521
(1mm)
.05”
(1.2mm)

Needle nose pliers are used primarily in fine electronics work.
It has jaws that are machined in thin half cones. This thin profile
increases tool access. The cone shape can be used for
precision loop forming of leads or wire.

Page I-11



TRONEX
PRECISION TWEEZERS

Tronex precision cutters and pliers are known all over the world
for their unmatched performance, quality, value and comfort.

Now Tronex precision tweezers are available with world-class
performance, quality, variety, value, and availability.

Tronex-brand and Vomm-brand tweezers are produced to the
highest manufacturing standards by craftsmen who have been
making precision tweezers for decades.

There is a particular emphasis on:

• ESD-safe tweezers
• Titanium tweezers
• Cutting tweezers
• Ultra-fine tweezers

Symbol Technical Description Corrosion Hardness & Resistance Magnetic
SA 316L Austenitic stainless steel Resistance to Wear Properties
Excellent Good Anti-or non
magnetic
S 304 Austenitic stainless steel Good Good
Excellent Slightly magnetic
C 410 Martensitic stainless steel OK
Good Magnetic
SP 17-4PH Martensitic precipitation- Good
hardened stainless steel OK Excellent Slightly magnetic
Good
CC 420 Martensitic stainless steel Magnetic

T Titanium Outstanding Anti-or non
magnetic

Precision Tweezers

AA-S

Model No. Mat’l Code Tips Description Length Width Finish

AA-S S Very Fine General Purpose 5.1 in / 130 mm .4 in / 10.6 mm Polished

GG-S

Model No. Mat’l Code Tips Description Length Width Finish

GG-S S Very Fine Tapered 5.1 in / 130 mm .6 in / 14.5 mm Polished

Model No. Mat’l Code Tips Description 00-S Width Finish

00-S S Medium Fine Strong Body Length .4 in / 9.7 mm Polished

4.7 in / 120 mm

Model No. Mat’l Code Tips Description 2-S Width Finish

2-S S Very Fine Tapered Length .4 in / 9.7 mm Polished

4.7 in / 120 mm

Made to TRONEX ®specifications in Japan Page I-12

Precision Tweezers

Model No. Mat’l Code Tips Description 2A-S Width Finish

2A-S S Blunt Slight Taper Length .4 in / 10 mm Polished

4.7 in / 120 mm

3-S

Model No. Mat’l Code Tips Description Length Width Finish

3-S S Very Fine General Purpose 4.7 in / 120 mm .4 in / 9.7 mm Polished

Model No. Mat’l Code Tips Description 7-S Width Finish

7-S S Very Fine Curved Length .4 in / 9.7 mm Polished

4.7 in / 120 mm

Made to TRONEX ®specifications in Japan Page I-13

LEADER IN CUTTING TECHNOLOGY
FOR OVER 25 YEARS

ATT AmericanTool (Thailand) Co.,Ltd.
Tel: +662 9390524-6 Fax: +662 939 0533
www.americantoolthailand.com
LINE@AmericanToolTH AmericanTool-Thailand
[email protected]
ID: @beb5530k