Hi-Tech Controls Hensel - Enclosure Catalog

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Copper Conductors, Sealable
Cable Entry via Metric Knockouts

K9259 IP ~ IP RAL 16
PS sJWiin a
6-25 mm2 , Cu [5s "@ 17035 ~"-411 _~
w
• with main line branch terminals for copper conductors
Iall • 4-pole per pole terminals for incoming cables:

u 10-25 mm2 r, 6 -1 6 mm2 f, with end ferrule,
>c terminals for outgoing cables:
6-16 mm2 r, 4-1 0 mm2 with end ferrule
Ill • with sealing facility
• included cable entry: 3 ESM 40, sealing range 0 17-30 mm
108 • for normal environment and protected outdoor

rated insulation voltage AC400V
current carrying capacity
tightening torque for terminal 80A
3.0 Nm terminals for incoming

cables
terminals for outgoing cables

3.0Nm

K9258 16

6-25 mm2 , Cu PS ~~35 ~ Wail ,!_
11
• with main line branch terminals for copper conductors 101. 200--:'[Hs-]-1
• 5-pole, per pole terminals for incoming cables: 1. .

10-25 mm2 r, 6-16 mm2 f, with end ferrule,
terminals for outgoing cables:
6-16 mm2 r, 4-10 mm2 f with end ferrule
• with sealing facility
• included cable entry: 3 ESM 40, sealing range 0 17-30 mm
• for normal environment and protected outdoor

rated insulation voltage AC400V
current carrying capacity
tightening torque for terminal 80A
3.0 Nm terminals for incoming

cables
terminals for outgoing cables

3.0Nm

K9508 IP ~ ~ 17

6-25 mm2 , Cu 5 5 65 PS RAL 121 Wall 12
7035 L 17
• with main line branch terminals for copper conductors
• 4-pole per pole terminals for incoming cables:

10-25 mm2 r, 6-16 mm2 f, with end ferrule,
terminals for outgoing cables:
6-16 mm2 r, 4-10 mm2 with end ferrule
• with sealing facility
• cable entry via knockouts, order AKM/ASM separately
(refer to index cable entry systems)
• for normal environment and protected outdoor

rated insulation voltage AC400V
current carrying capacity
tightening torque for terminal 80A
3.0 Nm terminals for incoming

cables
terminals for outgoing cables

3.0Nm

Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Copper Conductors, Sealable
Cable Entry via Metric Knockouts

K9503 .!!'__! IP 17
PS RAL 1 1~ Waii ,E
6-25 mm2 , Cu 55 65 7035
17 iu
• with main line branch terminals for copper conductors la/1
• 5-pole, per pole terminals for incoming cables: u
>c
10-25 mm2 r, 6-16 mm2 f, with end ferrule,
terminals for outgoing cables: Ill
6-16 mm2 r, 4-10 mm2 f with end ferrule
• with sealing facility
• cable entry via knockouts, order AKM/ASM separately
(refer to index cable entry systems)
• for normal environment and protected outdoor

rated insulation voltage AC400V
current carrying capacity
tightening torque for terminal 80A

3.0 Nm terminals tor incoming
cables

terminals for outgoing cables
3.0 Nm

K9509 17

6-35 mm2 , Cu PS · ~~ls 12l wan ~
'1" 17
• with main line branch terminals for copper conductors
• 4-pole per pole terminals for incoming cables: IOrn

16-35 mm2 r, 10-25 mm2f, with end ferrule,
terminals for outgoing cables:
10-25 mm2 r, 6-16 mm2 f w ith end ferrule
• with sealing facility
• cable entry via knockouts, order AKM/ASM separately
(refer to index cable entry systems)
• for normal environment and protected outdoor

rated insulation voltage AC 400V
current carrying capacity 100A
tightening torque for terminal
4.0 Nm incoming terminals
terminals for outgoing cables

3.0 Nm

K9507 !IP IP 17
'55 6s PS ~AL I 12] wan 12
6-35 mm2 , Cu 7035
17
• with main line branch terminals for copper conductors
• 5-pole per pole incoming terminals: Il I ,, 11m

16-35 mm2 r, 10-25 mm2f, with end ferrule,
outgoing cables: 10-25 mm2 r, 6-16 mm2f w ith end ferrule
• with sealing facility
• cable entry via knockouts, order AKM/ASM separately
(refer to index cable entry systems)
• for normal environment and protected outdoor

rated insulation voltage AC400V
current carrying capacity 100A
tightening torque for terminal
4.0 Nm incoming terminals
terminals for outgoing cables

3.0 Nm

Call for a Quotel 109
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Aluminum and Copper Conductors

Cable Entry via Metric Knockouts

iiJ
Iall
u
c>

IIJ

• .. • Labelling system for circuit description. • Included accessories as listed:
• Label template on the Internet at
~·---~-- "' . grommets ESM = IP 55
www.hensel-electric.de - in the
• Stainless steel cover screws with quick 'Downloads' area.
fastening metric thread.
Reducing cover fixing time.

• DK cable junction boxes with main • Burning behaviour: I IHEN 5 E L
branch terminals for copper conductors Glow wire test according
are equipped with sealable lids. to IEC 60 695-2-11: 750 °C,
flame-retardant, self-extinguishing
110
Call for a Quotel

(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Aluminum and Copper Conductors

Cable Entry via Metric Knockouts

RD 9123 IP 7oPSRAL ~., , 3 ~

1 .5-2.5 mm2 6s 35 wall

• 3 terminal blocks WKM 2.5/15 1 iu
• per terminal 2 x 0,5-2,5 mm2 f, 2 x 0,5-4 mm2 sol or
l/1
2 x 1,5-2,5 mm2 s, see technical details for more information
about terminal assignment a
• terminal blocks, by W ieland u
• for aluminium and copper conductors >c
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM Ul
separately (refer to index LES)
• with external fixing
• for normal environment and protected outdoor

rated insulation voltage AC/DC 500V
current carrying capacity 24A
tightening torque for terminal
0,4 Nm

RD 9125 PS II RAL 2.1 3 ~
7035
1.5-2.5 mm2 Wall

• 5 terminal b locks WKM 2.5/15 1.
• per terminal 2 x 0,5-2,5 mm2 f, 2 x 0,5-4 mm2 sol or

2 x 1,5-2,5 mm2 s, see technical details for more information
about terminal assignment
• terminal blocks, by Wieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• with external fixing
• for normal environment and protected outdoor

rated insulation voltage AC/DC 500V
current carrying capacity 24A
tightening torque for terminal
0,4 Nm

RD 9127 3
1.5-2.5 mm2 IP ,R7A0L35 ~., 1Wall 2.
PS
l 65 1

• 7 terminal blocks WKM 2.5/15
• per terminal 2 x 0 ,5-2,5 mm2 f, 2 x 0,5-4 mm2 sol or

2 x 1,5-2,5 mm2 s, see technical details for more information
about terminal assignment
• terminal blocks, by Wieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• with external fixing
• for normal environment and protected outdoor

rated insulation voltage AC/DC 500V
current carrying capacity 24A
tightening torque for terminal
0,4 Nm

Call for a Quotel 111
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Aluminum and Copper Conductors

Cable Entry via Metric Knockouts

RD 9045 PS RAL ~
6s '7o3sIP 4J Wall 4
w 1.5-4 mm2
2

Ual • 5 terminal blocks WKM 4/15 l-98- •l)+61+{
u IDOJc see technical details OK cable junction boxes for more information
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2 sol or 2 x 1,5-4 mm2 s,
:>

UJ about terminal assignment

• terminal blocks, by Wieland

• for aluminium and copper conductors

• terminal marking, neutral

• cable/conduit entry via metric knockouts order ESM/AKM

separately (refer to index LES)

• for normal environment and protected outdoor

rated insulation voltage AC/OC500V
current carrying capacity 28A
tightening torque for terminal
0,5 Nm

RD 9041 IP

1.5-4 mm2 65

• 10 terminal blocks WKM 4/15
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2 sol or 2 x 1,5-4 mm2 s,

see technical details OK cable junction boxes for more information
about terminal assignment
• terminal blocks, by Wieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM s
eparately (refer to index LES)
• for normal environment and protected outdoor

rated insulation voltage AC/OC500V
current carrying capacity 28A
tightening torque for terminal
0,5Nm

RK 9062 IP PS RAL -!1 10wau..;_
7035
1.5-4 mm2 6s 10

• 12 terminal blocks WK 4/U
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2 sol or 2 x 1,5-4 mm2 s,

see technical details OK cable junction boxes for more information
about terminal assignment
• terminal blocks, by Wieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• for normal environment and protected outdoor

rated insulation voltage AC/OC690V
current carrying capacity 41 A
tightening torque for terminal
0,5Nm

Call for a Quotel
112 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

OK Cable Junction Boxes Ef'lY CAse•
with Main Line Branch Terminals for Aluminum and Copper Conductors

Cable Entry via Metric Knockouts

RK 9064 T6sIP RAL 10

1.5-4 mm2 PS 7035 _;J wau ..!

• 14 terminal blocks WK 4/U _.10 iu
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2sol or 2 x 1,5-4 mm2 s,
ID{]l--139-1 1+70+1 Ual
see technical details OK cable junction boxes for more information u
about terminal assignment >c
• terminal blocks, by Wieland w
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• for normal environment and protected outdoor

rated insulation voltage AC/OC 690V
current carrying capacity 41 A
tightening torque for terminal
0,5Nm

RK 9109 IP 14
PS ~L ~ Waii .!
1.5-4 mm2 T6s 7035
10
• 19 terminal blocks WK 4/U
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2sol or 2 x 1,5-4 mm2s,

see technical details OK cable junction boxes for more information
about terminal assignment
• terminal blocks, by W ieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• for normal environment and protected outdoor

rated insulation voltage AC/OC 690V
current carrying capacity 41 A
tightening torque for terminal
0 ,5 N m

RK 9104 7 oIP 6 jW1-a4ll 6

1.5-4 mm2 65 10
Ps RAL 1
• 24 terminal blocks WK 4/U
• per terminal 2 x 0,5-4 mm2 f, 2 x 0,5-6 mm2 sol or 2 x 1,5-4 mm2s, 35

see technical details OK cable junction boxes for more information
about terminal assignment
• terminal blocks, by Wieland
• for aluminium and copper conductors
• terminal marking, neutral
• cable/conduit entry via metric knockouts order ESM/AKM
separately (refer to index LES)
• for normal environment and protected outdoor

rated insulation voltage AC/OC 690V
current carrying capacity 41 A
tightening torque for terminal
0,5 Nm

Call for a Quotel 113
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories

w

Ill

a
u

c>

1.11

DIN rails 115
Cable retention 116
Terminal sets 117-119
Accessories 120
Facility for sealing 121
Set sealing compound 121
Accessories for cable junction boxes ~ 70 mm2 122- 123

Call for a Quotel
114 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories

~- TSD02 ill
aUu1
~...... DIN rail >c
• for cable junction boxes D x020, D x120, KF x020, KD x020 and
.'• Ul
empty box KF PV 01 00
== • max. installation depth 32 mm, top hat profile 15 mm
• for the installation of terminal blocks
• with fixing screws

TSD04

DIN ra il
• for cable junction boxes D x040, KF x040, KD x040

and empty box KF PV 0200
• max. installation depth: 40 mm, top hat profile 15 mm
• for the installation of terminal blocks
• with fixing screws

TSK06

DIN rail
• for cable junction boxes K x060, KF x060, KF x060

and empty box KF PV 0300
• max. installation depth: 44.5 mm, top hat profile 35 mm
• for the installation of terminal blocks
• with fixing screws

TSK 10

DIN rail
• for cable junction boxes K x1 00, KF x1 00, KD x1 00 and empty

box KF PV 0400
• max. installation depth: 56.5 mm, top hat profile 35 mm
• for the installation of terminal blocks
• with fixing screws

TSK25

DIN rail
• for cable junction boxes K x250, KF x250, K x350, KF x350,

KD x250, KD x350 and empty boxes KF PV 0500, KF PV 0600
• max. installation depth: 71 .5 mm. top hat profile 35 mm
• for the installation of terminal blocks
• with fixing screws

TSK35

DIN rail
• for cable junction boxes K x350, KF x350, KD x350,

and empty box KF PV 0600
• max. installation depth: 80.5 mm, top hat profile 35 mm
• for the installation of terminal blocks
• with fixing screws

TSKSO 115

DIN ra il

• for cable junction boxes K x500, KF x500
and empty box KF PV 0700

• max. installation depth: 80.5 mm. top hat profile 35 mm
• for the installation of terminal blocks
• with fixing screws

Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
ErlY CAse•
OK Cable Junction Boxes
Accessories

ill o 0 •o KHR01
0 o
Ill Cable retention
for cable diameter 6.5 - 14 mm
a
• set with 10 x 6 cable rentention rings
u • 30 pieces for cable diameter 6.5 - 10 mm
>c • 30 pieces for cable diameter 1 - 14 mm
w
KHR02

Cable retention
for cable diameter 10 - 16 mm

• set with 10 x 6 cable rentention rings
• 30 pieces for cable diameter 10 - 14 mm
• 30 pieces for cable diameter 13 - 16 mm

Call for a Quotel
116 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories

DKL04 iJ.I

Rated connecting capacity: 1,5-6 mm2, Cu aUl
u
• for insertion in cable junction boxes >c
• 5-pole per pole 6 x 1.5 mmz sol, 4 x 2.5 mmz sol, 3 x 4 mm2 sol,
Ul
2 x6 mm2sol
• for cable junction boxes D 8020, D 8120, D 8040, D 9020, D 9120,

D 9040, D 9220, DP 9020, DP 9220, DE 9320, DE 9321, DE 9340,
DE 9341, KF 4020, KF 4040, KF 5020, KF 5040, KF 8020, KF 8040,
KF 9020, KF 9040, KD 5020, KD 5040, KD 4020, KD 4040
• complete with fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 11 mm
tightening torque for terminal 1.2 Nm

KKL06

Rated connecting capacity: 2,5-10 mm2, Cu

• for insertion in cable junction boxes
• 5-pole per pole 4 x 2.5 mmz sol, 4 x 4 mm2 sol, 3 x 6 mm2 sol,

2 x 10 mm2sol

• for cable junction boxes K 8060, K 9060. KF 4060, KF 5060,
KF 8060, KF 9060, KD 5060, KD 4060

• complete with fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 11 mm
tightening torque for terminal 1,5 Nm

KLS 10

Rated connecting capacity: 2 ,5-16 mm2 , Cu

• for insertion in cable junction boxes
• current carrying capacity: 63 A
• 5 -pole per pole 6 x 2.5 mm2 sol, 4 x 4 mm2 sol, 4 x 6 mm2 sol,

4 x 10 mm2 sol, 2 x 16 mm2 s

• for cable junction boxes K 8100, K 9100, KF 4100, KF 51 00,
KF 8100, KF 9100, KD 5100, KD 4100

• complete with fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 11 mm
tightening torque for terminal 2.0Nm

KLS25

Rated connecting capacity: 6-35 mm2 , Cu

• for insertion in cable junction boxes
• current carrying capacity: 102 A

• 5-pole per pole 6 x 6 mm2 sol, 6 x 10 mm2 sol/ f", 4 x 16 mm2 s/ f",
4 x 25 mm2 s/ f*, 2 x 35 mm2 s/ f" f* =with gas-tight end ferrule

• for cable junction boxes K 8250, K 8500, K 9250, K 9500,
KF 4250, KF 5250, KF 5500, KF 8250, KF 8500, KF 9250,
KF 9500, KD 4250, KD 5250

• complete with fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 16mm
tightening torque for terminal 3.0Nm

Call for a Quotel 117
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories

KLS50

iu Rated connecting capacity: 16-50 mm2 , Cu
Iall • for insertion in cable junction boxes
u • current carrying capacity: 150 A
• 4-pole per polel 6 x 16 mm2 s, 4 x 25 mm2 s, 4 x 35 mm2 s,
c>
w 4 x 50 mm2 s

• for cable junction boxes K 9350, K 9500, K 8350, K 8500,

KF 9350, KF 9500, KF 8350, KF 8500. KF 5350, KF 5500,

KF 4350, KF 4500, KD 5350, KD 4350

• complete with fixing elements

rated Insulation voltage AC/DC 690 V
Dismantling length 20mm
tightening torque for terminal 12.0 Nm

KLS51

Rated connecting capacity: 16-50 mm2 , Cu

• for insertion in cable junction boxes
• current carrying capacity: 150 A
• 5-pole per pole 6 x 16 mm2 s, 4 x 25 mm2 s, 4 x 35 mm2 s,

4 x 50 mm2 s
• for cable junction boxes K 9350, K 9500, K 8350, K 8500,

KF 9350, KF 9500, KF 8350, KF 8500, KF 5350, KF 5500,
KF 4350, KF 4500, KD 5350, KD 4350
• complete with fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 20mm
tightening torque for terminal 12.0 Nm

KLS54

Rated connecting capacity: 16-70 mm2 , Cu

• for insertion in cable junction boxes
• current carrying capacity: 216 A
• 4-pole per pole 4 x 16 mm2s, 4 x 25 mm2s, 4 x 35 mm2 s,

4 x 50 mm2 s, 4 x 70 mm2 s
• for cable junction boxes K 8500, K 9500, KF 4500, KF 5500,

KF 8500, KF 9500
• complete with fixing elements

rated insulation voltage AC/DC 690 V
Dismantling length 16mm
tightening torque for terminal 10.0 Nm

KLS55

Rated connecting capacity: 16-70 mm2 , Cu

• for insertion in cable junction boxes
• current carrying capacity: 216 A

• 5-pole per pole 4 x 16 mm2 s, 4 x 25 mm2 s, 4 x 35 mm2 s, 4 x 50

mm2s, 4 x 70 mm2s
• complete with fixing elements

rated insulation voltage AC/DC 690 V
Dismantling length 16mm
tightening torque for terminal 10.0 Nm

118 Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
ErlY CAse•
OK Cable Junction Boxes
Accessories

FC l45 iu
Ual
Rated connecting capacity: 1,5 - 4 mm2, Cu u
>c
• FIXCONNECT terminal set consisting of 5 terminals and 2 DIN rails w

i • for insertion in cable junction boxes
• current carrying capacity: 32 A
• 5-pole per pole 4 x 1 x 1.5-4 mm2 r/f
• for cable junction boxes K 8060, K 9060, KF 4060, KF 5060,
KF 8060, KF 9060, KD 5060, KD 4060, K 8100, K 9100, KF 4100,
KF 5100, KF 8100, KF 9100, KD 5100, KD 4100
• complete w ith fixing elements

rated insulation voltage AC/DC 690V
Dismantling length 17mm

FC l04

FIXCONNECT® plug-in terminal1.5-4 mm2 , Cu

• as a connecting terminal
• for installation on DIN rails, 15 mm top hat profile
• current carrying capacity: 32 A
• 1-pole 4 x 1.5-4 mm2 r/f

rated insulation voltage AC/DC 690V
Dismantling length 17mm

Call for a Quotel 119
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories

iu DKAL2 V2A
aIll . /
u ,_. cu C;) External brackets 2 pieces IP

:c> • for external wall fixing of cable junction boxes type D, K, KF, KD 54
w and empty box KF PV
IP
.... .... ~ _'e. • slot for wall mounting for screws up to 4.5 mm diameter
• Material: stainless steel V2A T54

DE MB 10 IP

Assembly bracket 54
PC RAL
• external brackets 10 units
• material: thermoplastics 7035
• for quick installation of cable junction boxes DE 922. and DN 20..

DPS02

Removable grommet

• degree of protection: IP 54 sealing range 0 10-13.5 mm

• for retrofitting
• for cable junction boxes DP 9020, DP 9220, DP 9025, DP 9221,

DP 9222, DP 9026, DPC 9225

EKA20

Removable trunking adapter

• degree of protection: IP 54 sealing range 0 10-13.5 mm

• for mini trunking up to 20 x 20 mm
• for cable junction boxes DP 9020, DP 9220, DP 9025, DP 9221,

DP 9222, DP 9026, DPC 9225

ERA20

Removable conduit adapter

• degree of protection: IP 54 sealing range 0 10-13.5 mm

• for wiring conduits M 20
• for cable junction boxes DP 9020, DP 9220, DP 9025, DP 9221,

DP 9222, DP 9026, DPC 9225

DKBSS

Labelling system for circuit description

• set with 5 pieces
• for cable junction boxes from 2.5 to 50 mm2 and KF PV boxes...,

can be inserted into cover fixing ducts.
• for attaching of labelling strips or marking with felt tip pen
• inscribable surface of 45 x 30 mm
• label template on the Internet at www.hensel-electric.de-

download area
• cannot be used in cable junction boxes 2.5 to 4 mm2 and

KF PV 01 I KF PV 02 boxes with sealing facility

Call for a Quotel
120 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories for Cable Junction Boxes from 70mm onwards

MiAL40

w 4 stainless steel external brackets
Ill • for external fixing of enclosures

a
u
c>
\II

Mi FM 40

Flange
knockouts M 25 to M 40

• knockouts: 2 x M 25/32 , 5 x M 32/40
• box wall 300 mm
• with fixing wedges and seal

Mi FM 50

Flange
knockouts M 20 to M 50

• knockouts: 2 x M 20, 4 x M 32/ 40/50
• box wall 300 mm
• with fixing wedges and seal

Mi FM 60

Flange
knockouts M 40 to M 63

• knockouts: 3 x M 40/50/63
• box wall 300 mm
• with fixing wedges and seal

Mi FM 63 _t_l-- 300--l

Flange with cable arrangement space ~[- ,_ /j
knockouts M 40 to M 63

• knockouts: 3 x M 40/50/63
• box wall 300 mm
• with fixing wedges and seal

Mi FP 70 IP

Flange Iss
sealing range: 1 x 0 30-72 mm
l--300--j
• box wall 300 mm
• with fixing wedges and seal "~[___~l

Mi FP 72 IP

Flange 65
sealing range: 2 x each 0 30-72 mm
"~.~[~~_~j~
• box wall 300 mm
• with fixing wedges and seal

Call for a Quotel
I I122
(800) 677-8942 I (303) 680-5159 HENSEL

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Accessories for Cable Junction Boxes from 70mm onwards

Mi FP 82 (u

Cable insert Ual
sealing range: 2 x each 0 30-72 mm
u
• box wall 300 mm
• divisible for cable insertion from the front >c
• degree of protection IP 54 only with additional strain and pressure w

relief (e.g. Mi ZE 62)

Mi ZE 62

Cable strain relief
for 2 cables with max. 60 mm external
diameter

• with fixing rail 284 mm long
• to be used only in connection with cable insertion Mi FP 82

, MiSA2
1 Dust protection cover
• for box sizes 1 to 4
• for 2 lid fittings

Call for a Quotel 123
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details

w

Iall

u

>c

UJ

Dimensions in mm 125- 128
Dimensions in mm of box walls without knockouts 127- 128
Terminals 129-131
Operating and ambient conditions 132- 134
Standards and regulations 135
FK cable junction boxes tested
for instrinsic fire ressistance 136

Call for a Quotel
124 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Dimensions in mm

08020 K8100 167 w
09020 K9100 141
09220 KF 4100 a1.11
KF 4020 KF 5100 _ , 0 8 _~ 133 _.
KF 5020 KF 7100 u
KF7020 KF 8100 1i Tt t r~ 77- >c
KF 8020 KF 9100
KF9020 KO 4100 ~8lti5~<0@ r-- 0 54.4 UJ
KO 5020 KO 5100
KO 4020 11l Y=E _l

. r--1~~
J..

08120
09120
KO 4120
KO 5120

K 8250
K9250
KF 4250
KF5250
KF 7250
KF8250
KF 9250
KO 4250
KO 5250

09040 ~::~ K9350 l+-54 -+11
KF 5040 KF 4350
KF9040 KF9350 j4- 67 -
KO 5040 KF8350
KF 5350 ~ 117~
rrri-J.A::::i~ K0 4350 260
a> CD CD K0 5350 240 ~I _C 88 ~-i l
190
~ ~ Lr -t-H;;;=L__) Jllu J~ ~1 38 -... 1~

y N -I l !l~~- ~ 96 ~ t
~ 77 -
08040 -
KF 4040 I~
KF 7040
KF 8040 ...--1----.
KO 4040
. !_)<

r - - ~--

\.. ' ;-:.'J

- _!;....-- •••

~ • l • _:!

K8500 - - - - - 310- - - --+j
K9500
-----280·----~
----- 274----~

K8060 KF 4500 14-- - - 2 4 8 1 - - --"1
K9060
KF 4060 KF 5500 ----240---~ 1
KF 5060
KF 7060 KF 8500 !4- 95--:1
KF8060 KF9500 ,·~ ~~·85-~-""13~7,s ~
KF9060 ~ tt= 1 ~=~1
KO 4060 ... 3rs_r-
KO 5060 ~Q Jl~l-~r-1~-H-t-+-~~ :._~·_~_j_~_•__~-~~. · 1 ~

t

~~ .1 . .. •

~

Call for a Quotel 11-63-ll
l-77--l

I I = usable installation space
with mounted cable glands

(800) 677-8942 I (303) 680-5159 125

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details K 7055
Dimensions in mm K 7004
K 7005
DE 9320 K 7042
DE 9321 K 7052
K 9951
w K 1204
K 1205
Iall

u

>c

w

DE9340 r.:-s2 -~
DE 9341
11 37 il-

~J

lSI

tE

'-!:::::===:::!J_r 37 ~-

DP 9220 K 2401
K 2404
K2405

00
00

ON 2000/ Call for a Quotel =usable installation space I
ON 2030 (800) 677-8942 I (303) 680-5159
when cable glands are attached
DE9220/
DE 9221 I HENSEL

126

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details w
Dimensions in mm of Box Walls Without Knockouts
Ual
08020 K 8250
KF 8020 KF 8250 u
KF 4020 KF 4250
KF 7250 >c
KF 7020 KO 4250
KD4020 Ul

0 8120 K8350
KF 8350
08040 KF 4350
KF 8040 KO 4350
KF 4040
KF 7040 K8500
K04040 KF 8500
KF 4500
K8060
KF 8060
KF 4060
KF7060
KD 4060

K8100
KF 8100
KF 4100
KF 7100
KD4100

Call for a Quotel II = usable installation area
(800) 677-8942 I (303) 680-5159 in box walls
127

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Dimensions in mm of Box Walls Without Knockouts

K 0 100
K 0 101

w

Iall

u

>c

Ul

K0200
K0201

K0300
K0301

K0400 f-:-170-l
K0401
1~146-ll

Call for a Quotel
128 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes

Technical Details
Terminals

Connecting terminals for copper conductors (Cu) iu
Hint: The connection of different types of conductors and/or d ifferent cross-sections at one clamping unit is not permitted. Ual
u
=f ' flexible with end ferrule >c
w

ji 0 9025, 0 9125, 0 9225, 6 sol 1-2 1.2 Nm 6mm2
0 9245, 0 9045, DP 9025 4 sol 1-3
OKL04 DP 9221, DP 9222 2.5 sol 1-4 10mm2
DE 9325, DE 9326 1.5 sol 1-6 16mm2
~ DE 9345, DE 9346 35mm2
KD 5025, KD 5045 10 sol 1-2 50mm2
KKL06 KF 5025, KF 5045 6 sol 1-3 50mm2
4sol 1-4 70mm2
KLS 10 KF 9025, KF 9045, 2.5 sol 1-4 70mm2
ON 2035, KF WP 2025, 16 s 25mm2
-KLS25 10 sol 1-2 35mm2
•KLS50 KF WP 2045, KF WP 3025 6 sol 1-4
-KLS51 KFWP 3045 4 sol 1-4 129
2.5 sol, f ' 1- 4
~ K9065, 35 S, f1 2-6 1.5Nm
KD 5065 25 s, f1
4x KLS 54 KF 5065, KF 9065 16 s, f' 1-2
KFWP3065 10 sol, f' 1-4
~ 6 sol 1-4
K 9105, K 8105 2 50s 1-6 2Nm 63A
5 x KLS 55 KD 5105 35s 1-6
KF 5105, KF 9105 25s 1-4
~ KFWP 2105, 16 s 1-4
KFWP3105 1-4
1-6
K 9255, K 8255, K 9502 2 3Nm 102 A
KD 5255 1-4
KF 5255, KF 9255 1-4
1-4
K9504 2 1-6 12 Nm 150A

K 7055, K 9355, K 9505, 2 50s 1 -4 12 Nm 150A
KF 9355, KF 9505, 35s 1-4
KF 5355, KF 5505, 25s 1-4
KD 5355, KD 4355 16 s 1-4
1-4
K7004 4 70s 10Nm 216A
50s 1-4
K7005 4 35s 1-4 10 Nm 216A
25 s 1-4
K9259 incoming 2 16 s 1-4 3Nm 80A
K9508 outgoing 4 1-4
70s 1-2
50s 1- 4
35 s
25s
16 s

25 r
16 r

~ K9509 incoming 2 35 r 1-2 4Nm 100A
K9508
outgoing 4 35 r 1-4 3 Nm

,::::: ~ terminal for equipotential bonding:
DP9026 for 1 continued conductor 4-25 mm2 and 5 conductors 4-10 mm2 (16 mm2 sol)
I IHESSEL
Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Terminals

Terminal blocks for copper- (Cu) and aluminium conductors (Aiu)

w

Iall

u

>c

Ul

Manufacturer Wieland:

RD 9123, RD 9125, WKM 2 2,5 2 f/f1 = 0,5-2,5 0.4Nm 24A •• ••
RD 9127 1,5 sol = 0,5-4 ••
2.5/15 s = 1.5-2.5 ~
RD 9045, RD 9041
rated voltage •
AC;IOC5()C)V
~
WKM 2 42 flf ' = 0 .5 -4 0.5Nm 32A
2.5 sol = 0 .5-6 ~•
4/ 15 1.5 s = 1.5-4

rated VOltage
ACJ0C5()C)V

RK 9062, RK 9064 WK4/U 2 42 f/f' = 0 .5-4 0.5Nm 41 A
RK 9109, RK 9104 2.5 sol = 0 .5-6
rated voltage: 1.5 s = 1.5-4
AGIOCOOOV

Manufacturer Weidmuller:

D 9041 AKZ2.5 4 2.5 4 flf' sol = 0.5-2.5 0.5Nm 20A ~•
K 9061 1.5 s = 1.5-2.5 ~
K9351 ratodvcttQg~Ct
~-·
ACJOC250V
'
AKZ4 4 44 f/sol = 0 .5 - 4 0.6Nm 20A ••
2.5 s = 1 .5 -4
rated VOftoso 1.5 f' = 0 .5 -2 .5
ACIOC400V

WDU16N 4 16 4 f'/sol = 1.5-16 3.0Nm 76A
10 f/s = 1.5-25
mtodvoltoge 6

AGIOC400V

K 7051 4 2.5-50 4 = 2.5-50 10.0Nm Cu ~-
150A
KF 9251
KF 9501 Alu
K9951 120A

K 2401 2 1.5-50 2 = 1.5-50 1.5Nm Cu/Aiu ~
to 150A
130 12Nm

4 6-95 4 = 6-95 12Nm Cu/Aiu ~-
490A
to

22Nm

4 35-240 4 = 35-240 26Nm Cu/Aiu -
to 850A

55Nm " I IHENSEL

Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Terminals

Terminals

Rated connecting capacity 95mm2 150mm2 K 2404 I K 2405 w
Current carrying capacity 160A 250A 240 mm2
Tightening torque 20 Nm 20Nm 400A Ual
Clamping units per pole 40Nm
24 u
24
c>

UJ

• Conductor cross sec- 10-50 16-50 16-50 25-50 25 -50
tion Cu/Alu1l sol (round) 16-95 16-150 16-70 25-240 25-120

e Conductor cross sec-
tion Cu/Aiu1l s (round),
f {flexible)

• Conductor cross sec- 50-95 50-150 50-70 50-185 50-120
tion Cu/Alu1l sol (sector)

• Conductor cross sec- 35-95 35-150 35-70 35-240 35-120
tion Cu s (sector) 35-50
------------- ~ _.....__ -
~
35 -70 50 -120 95-185 50-95
Conductor cross sec-
tion Alu1l s (round),
f (flexible)

1) Prior to connection, aluminium conductors must be prepared according to the relevant technical
recommendations. The connections must be checked at regular intervals and maintained after
6 months at the latest.

FIXCONNEC~ technology

Current carrying
capacity

DPC 9225 4 1.5 - 4mm2 1.5 - 4 mm2 32A
KC9045
KC 9255 4 1.5-4 mm2 1.5-4 mm2 32A
KC 9355
4 2.5 - 10 mm2 2.5 - 10 mm2 57 A

4 2.5- 16 mm2 2.5- 16 mm2 76A

Call for a Quotel 131
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Operating and Ambient Conditions

w D ..., DP ..., K 7055 EKA20, KF ... KD ...
DPC ..., DE ..., K 7004/5 ERA20,
Iall KC ..., K ..., K9951 DPS02
u RD ..., RK ... K 1204/5
>cw K 2404/5
K2401
Application area MiFM ..

Suitable for indoor installation Suitable for outdoor installation
(normal environment and/or protected outdoor) (harsh environment and/or outdoor)

Resistant to occasional Resistant to occasional cleaning procedures (direct jet)
cleaning procedures max. with high-pressure cleaner without additives
water pressure: max. 100 bar, water temperature: max. 80° C, distance ~ 0.15 m
Ambient temperature in accordance with the requirements IP 69K
- Average value over 24 hours box and cable entries at least IP 65
- Maximum value
- Minimum value +35° c + 35° C +35° C + 55° c + 55° c
Relative humidity + 40oC + 70° c + 70° c
- short-time +40° C +40° c -25° c -25° c
Fire protection - 25° C 50% at 40° c
in the event of internal faults -25° c - 25° C 100% at 25° c 50% at40° C

50% at 40° C 50% at 40° c 100% at 25° c
100% at 25° c
100% at 25° c

Demands placed on electrical devices from standards and laws:

Minimum requirements
- Glow wire test in accordance with IEC 60 695-2-11 :
- 650° C for boxes and cable glands
- 850° C for conducting components

Fire protection Demands
in the event of specific risks or placed on electrical installations and devices in areas and facilities subject to fire risk,
hazards e.g. DIN VDE 0100 Part 482 (German standard), official regulations, VdS directives

Minimum requirements
- Glow wire test in accordance with IEC 60 695-2-11 :

c- 850° for .boxes and cable glands

- 850° C for cavity wall installation
- use of fire resistant cables

Burning behaviour 750° c 960° c 750° c 960° c 960° C
- Glow wire test 5V
V-2 V-2 flame-retardant V-0 flame-retardant
IEC 60 695-2-1 1 flame-retardant flame-retardant self-extinguishing flame-retardant self-extinguishing
- UL Subject 94 self-extinguishing self-extinguishing self-ext inguishing
IK08 (5 Joule)
Degree of protection IK07 (2 Joule) IK08 (5 Joule) IK08 (5 Joule)
against mechanical load
Toxic behaviour halogen-tree halogen-free halogen-free halogen-free halogen-free
silicone-tree silicone-free silicone-free silicone-free silicone-free

"Halogen-free" in accordance with IEC 754-2 "Common test methods for cables -
Determination of the amount of halogen acid gas".

For material properties see technical data.

Call for a Quotel
132 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Operating and Ambient Conditions

Empty boxes Empty boxes

D ..., DP •.., DE ..., EKA 20, ERA 20, KF ... KD ... w
K9..., K8... DPS02
laJl
Application area Suitable for indoor installation Suitable for outdoor installation
(normal environment and/or protected outdoor) (harsh environment and/or outdoor) u
Resistant to occasional
cleaning procedures >c

Ambient temperature U)
- Average value over 24 hours
- Maximum value Resistant to occasional cleaning procedures (direct jet)
- Minimum value max. with high-pressure cleaner without additives
Fire protection water pressure: max. 100 bar, water temperature: max. 80° C. distance 2: 0.15 m
in the event of internal faults in accordance with the requirements IP 69K
box and cable entries at least IP 65

Demands
placed on electrical devices from standards and laws

Fire protection Minimum requirements
in the event of specific risks or - Glow wire test in accordance with IEC 60 695-2-1 1:
hazards - 650° C for boxes and cable glands
- 850° C for conducting components

Demands placed on electrical installations and devices in areas and facilities subject to fire risk,
e.g. DIN VDE 0100 Part 482 (German standard), official regulations, VdS directives:

Minimum requirements
- Glow wire test in accordance with IEC 60 695-2-11:
- 850° C for boxes and cable glands
- 850° C for cavity wall installation
- use of fire resistant cables

Burning behaviour 750° c flame-retardant 960° c 960° c
- Glow wire test self-extinguishing
V-2 V-0 5V
IEC 60 695-2-1 1 flame- retardant halogen-free flame-retardant flame-retardant
- UL Subject 94 self-extinguishing silicone-free self-extinguishing self-extinguishing

Degree of protection IK07 (2 Joule) IK08 (5 Joule) IK08 (5 Joule)
against mechanical load
halogen-free halogen-free halogen -free
Toxic behaviour silicone-free silicone-free silicone-free

"Halogen-free" in accordance with IEC 754-2 "Common test methods for cables -
Determination of the amount of halogen acid gas".

For material properties see technical data.

Call for a Quotel 133
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes
Technical Details
Operating and Ambient Conditions

Boxes with terminals

UJ KFWP ....
lall
Application area Suitable for outdoor installation (harsh environment and/or outdoor).
u For application in ambient conditions with formation of condensation and ingress of water as well as for
>cw
installation in the ground without traffic loads in accordance with DIN VDE V 0606-22-100.

Resistant to occasional Resistant to cleaning procedures (direct jet)
cleaning procedures
cmax. with high-pressure cleaner without additives, water temperature: max. 80°

Ambient temperature +55° c
- Average value over 24 hours + 70° c
- Maximum value -25° c
- Minimum value

Relative humidity 100%

Brennverhalten 960° c
- GIOhdrahtpnJfung nach
V-0
IEC 60 695-2-1 1
flame-retardant
- UL Subject 94 self-extinguishing

Degree of protection IK08 (5 Joule}
against mechanical load
halogen -tree
Toxic behaviour silicone-free

Call for a Quotel
134 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes

Technical Details
Standards

Hensel cable junction boxes and cable entry systems comply with the following standards and requirements: iu

- IEC 60 670 - 22 ln
Particular requirements for connecting boxes and enclosures
Part 22: Particular requirements for connecting boxes a

-IEC 60 998 u
Connecting devices for low voltage circuits for household and similar purposes
Part 2-1: Particular requirements for connecting devices as separate entities with screw-type terminals >c
Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type terminals
Ul
-IEC 60 999
EN 60999
Connecting devices
Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors

-DIN VDE V 0606-22- 100 (German standard)
Enclosures for encapsulation with connection terminals (GVV)

- IEC 60 670-22
Particular requirements for connecting boxes and enclosures

- EN 60 947 -7-1
Low-voltage switchgear and controlgear,
Part 7: Auxiliary equipment;
Section 1 -Terminal blocks for copper conductors

-EN 60 423
Conduits for electrical pursposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings

-IEC 60 529
DIN VDE 0470 Part 1 (German standard)
Degree of protection by enclosure (IP Code)

- EN 50 267
examination of cables and insulated wires
halogen-free materials

Call for a Quotel 135
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY CAse•
OK Cable Junction Boxes

Technical Details
Standards

Safety circuits must remain operational for a FK Cable junction boxes comply with these
sufficient period in accordance with the national requirements when used together with type-
ill regulations governing fire protection requirements approved cables as well as suitable cable
clamps or mounting devices.
Ual for cable installations during exposure to fire.
u • Cable junction boxes tested for intrinsic fire
>c This ensures that electrotechnical equipment such restistance.

Ill as luminaires, lifts, smoke outlets. alarm systems • Degree of protection IP 65, IP 66
etc. are supplied with power for 30 or 90 minutes
and thereby enable people to leave the building • Box made from sheet steel with powder coating
and assist rescue teams in carrying out their work. or duroplastic, pastel orange RAL 2003

Junction box with connected cables When planning and implementing these cable • No additional fire load, no toxic or corrosive
after testing. installations, the current specimen regulation for emissions
fire protection requirements in these installations
must be observed. • Intrinsic fire resistance according to DIN 4102
part 12 (German standard) in connection with
function-retaining cables of 0.5-16 mm2

• Protection against direct contact also maintained
due to the box

• Captive cover with 4 screw fixings

Box fixing with plugs:

Anchor (building materials) Fischer type ... Hilti type ...

FIS V.. FNA.. FBS.. FBN.. FHY.. HUS.. HSA.. HIT· HY..
X
Limestone blocks KS 12 X X X
X
Building bricks Mz 12 X X X

Test temperature cuNe in Airbricks HLz 12 X X
accordance with DIN 41 02 X

Limestone air blocks KSL 12 X

Prestressed concrete slabs X

Porous concrete slabs => 3.3 X

Porous concrete blocks => 4 X

Concrete => B25 I =< B55 XXX XX

Please observe the current approvals and notes from the manufacturer of the plugs.

Standards and regulations: IEC 60 670-22 EN 60 947 -7 -1
EN 50 262
IEC 60 998-1 IEC 60 529 DIN 4102 Part 12 (German standard)
EN 60 998 Part 1 DIN VDE 0470 Part 1 (German standard)

IEC 60 998-2 -1
EN 60 998 Part 2-1

Ambient conditions in working operation:

Application area Suitable for indoor installation (normal environment and/or protected outdoor)
Ambient temperature
- Average value over 24 hours +35° c +35° c + 35° c
- Maximum value + 40° c + 40° c + 40° c
- Minimum value -25° c -25° c - 5° c
Relati ve humidity
- short-time 50 o/o at 40° C 50 o/o at 40° C 50 o/o at 40° C
Material 100 o/o at 25° C 100 o/o at 25° C
100 o/o at 25° c
Degree of protection sheet steel, powder-coated
against mechanical load Duroplast halogen -free
halogen- free
136 IK1 0 (20 Joule)
IK06 (1 Joule)

Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards
0
t.

a

0

m

c>

w

KV Small-type Distribution Boards
up to 63 A

- 3 to 54 modules
-degree of protection IP 54- 65
- made from thermoplastic material
- protection class II, (gJ
-in accordance with IEC 60 439-3

Call for a Quotel 137
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY BO~rD
KV Small-type Distribution Boards

Box Walls

Assignment of box walls: 4 All box walls are
5 Wand 5 listed in the fold-out
The assignment of box walls is effected via wall symbols that are of the coverpages.
assigned to each product. The individual figures 2 give an indication, 6
which wall is concerned.

Box walls with membranes Box walls with metric membranes

..Wall 1 Wall 7 Wall 18 ~l'il\l,lo~
c0.. 3 x 0 7-16 mm 1 x M 20 12 X M 20
a 2 X M 20/25 !'i)
0 Wall 8 1 X M 32
ID Wall 2 ..ii.i 3x M 16 1m dB
4 x0 7-16 mm m Wall 19
>c Wall 9 ~ 4xM 20 I IHENSEL
UJ 1 x 0 10-20 mm 2 x M 20 2 X M 25/32
1m 1 X M 32/40
Wall ~ Wall 10
2 x M 20 all Wall 20
4 x 0 7-16 mm 1 X M 20/32 6xM20
&iii 2 X M 25/32
2 x 010-20 mm Wall 11 1 X M 32/40
2 xM 20 1NtoM
1 x 0 10-24 mm 1 X M 20/32 Wall 121
2 xAVS 16/
-Wall 4 Wall 12 EVS 16
4x M 20
8 x 0 7-16 mm 1 X M 20/32
2 x 010-20 mm
1 x 0 10-24 mm Wall 13
2 x M 20
Wall l 5 ~~ 1 X M 25/32

8 x 0 7-12 mm Wall 14
8 x 0 7-14 mm 2 X M 20/25
4 x 012-20 mm 1 X M 25/32
1 x 0 16,5-29 mm
Wall 15
Wall 6 4 X M 20/ 25
1 X M 25/32
8 x 0 7-12 mm
8 x 0 7-1 4 mm Wall 16
4 x 012-20 mm 2 xM 20
1 x 0 16,5-29 mm 2x M 25
8x0 M 20 1 x M 32/40

Box walls with cable glands Wall 17
for conduits and elastic membranes 4x M 20
2 X M 20/25
Wall ~ ~d 1 X M 32

8x0 M 16/20
for conduit or cable 0 9-14 mm
1 x M 25/32 for conduit or cable
0 18-24 mm, 6 x 0 9-18 mm

Wall ~ Call for a Quotel
8 X 0 M 16/20 (800) 677-8942 I (303) 680-5159
for conduit or cable 0 9-14 mm,
1 x M 25/32 for conduit or
cable 0 18-24 mm, 6 x 0 9-18 mm,
8xM20

138

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef"'Y BO~ro
KV Small-type Distribution Boards
Contents 141 - 156

KV Small-type distribution boards 3-54 modules
Cable entry via elastic membranes

KV Small-type distribution boards 12-54 modules 157 - 169
Cable entry via metric knockouts
172 - 176 0
KV Small-type distribution boards 3-48 modules
"weatherproof", c...
for outdoor installation
(harsh environment and/or protected outdoor a

KV Small-type distribution boards 12-48 modules m0
Conduit entry via integrated membranes
>c

UJ

178 - 180

KV Extra circuit-breaker boxes 182 - 183
with additional space for electrical devices not to be manually actuated 185 - 186

Cable entry via elastic membranes 188 - 189
Cable entry via metric knockouts

Empty boxes

KWH meter box 191

Accessories 193 - 198

Technical details 200 - 206

Call for a Quotel 139
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'lY BO~rD
KV Small-type Distribution Boards
Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

•

\.

)

0

(a.

)0m
>c
I
Ul

)

)
)

• Cable entry via integrated elastic • 12 to 54 modules: attached blanking • Burning behaviour:
membranes strips for DIN rail equipment openings.
Glow wire test according to L...:.....=-=..--='-'
• 3 to 9 modules:
protective cover can be cut out IEC 60 695-2-11: 750 oc,

flame-retardant, self-extinguishing

• FIXCONNEC~ terminal technology • KV Small-type distribution boards with • Integrated compartment for accessories -
for PE and N up to four disconnectable N-potentials in everything has its proper place.
one bar enabel the installation of RCDs
• connection for copper conductors without additional efforts or accessories. • Screws made of stainless steel V2A.

140 Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef"'Y BO~ro
KV Small-type Distribution Boards
Circuit Breaker Boxes IPj PS ..!
Cable Entry via Integrated Elastic Membranes
65 - ,Wall
KV 9103
a0c..
3 modules: 1 x 3 x 18 mm c0o
>c
• 1-row
• per PEIN number x cross section 1 x 25 mm2, 4 x 4 mm2 Cu, UJ

FIXCONNECT<!> terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment. top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 8103 [g] .,.!!:.] PS ,RAL I .2.._

3 modules: 1 x 3 x 18 mm 65 7035 ,Wall
without PE and N terminal
fo-102-i l-92-i
• 1-row
• order PEIN terminals separately IB~
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400 V

KV 1503 ,
,PS RAL I
3 modules: 1 x 3 x 18 mm 7035 Wall

• 1-row
• per PE/N number x cross section 1 x 25 mm2, 4 x 4 mm2 Cu,

FIXCONNECT<!> terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 1603 ,PS ~ I Wall
7035
3 modules: 1 x 3 x 18 mm
without PE and N terminal

• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• w it h transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400 V

Call for a Quotel 141
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 5103 PS RAL I Wall

3 modules: 1 x 3 x 18 mm 7035 ; 1
without PE and N terminal

• 1-row

• order PEIN terminals separately

• for the installation of DIN rail equipment, top hat profile 35 mm

• with transparent lid, sealable

• locking device for hinged lid and sealing facility see accessories

• w ith cable entry cover

• protective cover can be cut out

0 • cable entry via integrated elastic membranes

(_
a
0 rated Insulation voltage AC400V

Ill
:c>
Ul KV 9104
RAL ..!.
4 .5 modules: 1 x 4.5 x 18 mm
PS 17035 Wall

2

• 1-row
• per PEIN number x cross section 2 x 25 mmz, 4 x 4 mmz Cu,

FIXCONNECT® terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 8104 IP PS RAL 1 ~
Wall
4.5 modules: 1 x 4.5 x 18 mm 65 7035 ; 2
without PE and N terminal

• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated Insulation voltage AC400V

KV 1504 IP RAL 2
PS 11 7035 Wall
4.5 modules: 1 x 4.5 x 18 mm "54
2
• 1-row

• per PEJN number x cross section 2 x 25 mmz, 4 x 4 mmz Cu,

FIXCONNECT® terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

142 Call for a Quotel
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef'IY BOQrD
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 1604 [Q] .,IP- PS RAL ..3
54
4 .5 modules: 1 x 4.5 x 18 mm Wall
without PE and N terminal 17035 2

• 1-row ,_126-< 1-111-1
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm ~ ~r
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories !§
• with cable entry cover
• protective cover can be cut out I
• cable entry via integrated elastic membranes
1

rated insulation voltage AC 400V 0c...
cr
KV 5104 [Q] IP ..3
41 0
4 .5 modules: 1 x 4.5 x 18 mm Wall ID
without PE and N terminal 2
>c
• 1-row
• order PEIN terminals separately Ul
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable PS .,R..A..L_.
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover 7035
• protective cover can be c ut out
• cable entry via integrated elastic membranes i~r81~1 ~

rated insulation voltage AC400V

KV 9106 IP PS ~ Wall
-, 3
6 modules: 1 x 6 x 18 mm 65 T7o3s

• 1-row
• per PEIN number x cross section 2 x 25 mm2, 4 x 4 mm2 Cu,

FIXCONNECT"b terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 8106 IP PS RAL ...!..

6 modules: 1 x 6 x 18 mm "'65 [io3s Wall
without PE and N terminal ,3

• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel 143
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 1506 IP PS RAL I I w3an

6 modules: 1 x 6 x 18 mm 54 7035 L. 3

• 1-row

• per PEIN number x cross section 2 x 25 mm2, 4 x 4 mm2 Cu,
FIXCONNEC~ terminal technology,

for terminal technology refer to technical data

• for the installation of DIN rail equipment, top hat profile 35 mm

• with transparent lid, sealable

• locking device for hinged lid and sealing facility see accessories

• with cable entry cover

0 • protective cover can be cut out

(. • cable entry via integrated elastic membranes
a
0
rated insulation voltage AC400V
Ill
:c>
IIJ

KV 1606 IP PS
54
6 modules: 1 x 6 x 18 mm

without PE and N terminal

• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 5106 3

6 modules: 1 x 6 x 18 mm IP PS ~AL , Wall
without PE and N terminal
41 7035 3
• 1-row
• order PEIN terminals separately I1~~ F~)n14 ol ..-111-.4
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel
144 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV9109 IP PS I RAL ~4....
Wa ll
9 modules: 1 x 9 x 18 mm 65 7035 _ 4

• 1-row a0c..
• per PEIN number x cross section 2 x 25 mm2, 8 x 4 mm2 Cu, 0m
c>
FIXCONNEC~ terminal technology,
for terminal technology refer to technical data Ill
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated Insulation voltage AC400V

KV 8109 IP RAL Wall
4
9 modules: 1 x 9 x 18 mm ~65 PS 7035
without PE and N terminal

• 1-row
• order PE!N terminals separately
• for the installation of DIN rail equipment. top hat profile 35 mm
• with transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 1509 IP lj L ~

9 modules: 1 x 9 x 18 mm "54 PS 7035 Wall

4

• 1-row
• per PEIN number x cross section 2 x 25 mm2, 8 x 4 mm2 Cu,

FIXCONNEC~ terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 1609 IP PS RAL Wall
7 03 5 4
9 modules: 1 x 9 x 18 mm "'""54
without PE and N terminal

• 1-row
• order PE/N terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel 145
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Et"'IY BO~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 5109 IP 4
~4 1
9 modules: 1 x 9 x 18 mm PS .~LI I Wall
without PE and N terminal 7035 L 4

• 1-row

• order PEIN terminals separately

• for the installation of DIN rail equipment, top hat profile 35 mm

• with transparent lid, sealable

• locking device for hinged lid and sealing facility see accessories

• with cable entry cover

• protective cover can be cut out

• cable entry via integrated elastic membranes

0

(.
a
0 rated insulation voltage AC400V

m
c>
w

Call for a Quotel
146 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
ErtY BOQrD
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 9112 [Q] IP PS RAL ~
65 Wall
12 modules: 1 x 12 x 18 mm
17035 5
• 1-row
• per PEIN number x cross section 3 x 25 mm2, 12 x 4 mm2 Cu. ~~; c1"- 295 - oj 1"~29'1
-.If
FIXCONNEC"f® terminal technology,
for terminal technology refer to technical data 0c..
• N separable for various potentials a
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door 0
• For locking device for door and facility for sealing refer to ID
accessories.
• with cable entry cover >c
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes Ill

rated insulation voltage AC 400V

KV 8112 ~ PS 'i AL ~
65 Wall
12 modules: 1 x 12 x 18 mm 7035 5
without PE and N terminal

• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 1512 [Q] IP 1f§ ~
~54
12 modules: 1 x 12 x 18 mm PS 35 Wall

• 1-row 5
• per PEIN number x cross section 3 x 25 mm2, 12 x 4 mm2 Cu,
~ ~ cj+-295-->j 1"":29'1
FIXCONNEC"f® terminal technology, k-< _/f .!!
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel 147
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 1612 [Q] IP PS RAL I 5
54
12 modules: 1 x 12 x 18 mm 7035 L~~~

without PE and N terminal I [ i cjo- 295- "1 jo1290j

• 1-row L~ c:::-J~ ~c50
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.

• with cable entry cover

0 • with blanking strips for unused DIN rail openings

(. • cable entry via integrated elastic membranes
a
0
rated insulation voltage AC400V
Ill
:c>
IIJ

KV 9118 [Q] 6
Lw;nIP
18 modules: 1 x 18 x 18 mm
- 65
PS RAL I

7035

• 1-row
• per PEIN number x cross section 4 x 25 mm2, 16 x 4 mm2 Cu,

FIXCONNECT0 terminal technology,
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 8118 6

18 modules: 1 x 18 x 18 mm PS ~L Waii
without PE and N terminal
7035 ~ 6
• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel
148 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 1518 IP RAL 6
~54
18 modules: 1 x 18 x 18 mm PS J o3 5 Wall

_. a

• 1-row c0..
• per PEIN number x cross section 4 x 25 mm2, 16 x 4 mm2Cu. a
m0
FIXCONNECT® terminal technology, >c
for terminal technology refer to technical data w
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400 V

KV 1618 IP PS RAL ~
~ 54
18 modules: 1 x 18 x 18 mm l7oas Wall
without PE and N terminal
_s
• 1-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400 V

KV9224 IP PS ' j AL , 5
7035 Wall
24 modules: 2 x 12 x 18 mm 65
5

• 2-row
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2Cu,

FIXCONNECT® terminal technology,
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400 V

Call for a Quotel 149
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eo~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 8224 PS ~ l w~au

24 modules: 2 x 12 x 18 mm - ~35 l., 5
without PE and N terminal

• 2-row

• order PEIN terminals separately

• for the installation of DIN rail equipment, top hat profile 35 mm

• with transparent door

• For locking device for door and facility for sealing refer to

accessories.

• with cable entry cover

• with blanking strips for unused DIN rail openings
0c.. • cable entry via integrated elastic membranes
a
0
ID rated insulation voltage AC 400V
>c
UJ
u5
KV 2524
~ "IQP 4 PS · ~35 lJ:"
24 modules: 2 x 12 x 18 mm

• 2-row
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2 Cu,

FIXCONNECT® terminal technology,
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

KV 2624 5

24 modules: 2 x 12 x 18 mm IP PS ,RAL I wan
without PE and N terminal
54 7035 5
• 2-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

Call for a Quotel
150 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef"'Y BO~ro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV9236 IP PS 6
65 Wall
36 modules: 2 x 18 x 18 mm
6
• 2-row
• per PEIN number x cross section 8 x 25 mm2, 32 x 4 mm2 Cu. 0

FIXCONNEC"f® terminal technology, at.
for terminal technology refer to technical data
• N separable for various potentials 0
• for the installation of DIN rail equipment, top hat profile 35 mm ID
• with transparent door
• For locking device for door and facility for sealing refer to :c:>
accessories.
• with cable entry cover \1.1
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

KV 8236 ~ PS I RAL ~
17035 Wall
36 modules: 2 x 18 x 18 mm 65 6
without PE and N terminal
l l - - 403-..f
• 2-row
• order PEIN terminals separately I ~~·-j
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

KV 2536 IP RAL ..!..
~54
36 modules: 2 x 18 x 18 mm PS '1 7035 Wall

• 2-row 6
• per PEIN number x cross section 8 x 25 mm2, 32 x 4 mm2 Cu,

FIXCONNEC"f® terminal technology,
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel 151
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 2636 [Q] IP PS RAL I 6
54
36 modules: 2 x 18 x 18 mm 7035 L~~~
without PE and N terminal

• 2-row f.-403--.j H 29>-l
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm I~
• with transparent door
• For locking device for door and facility for sealing refer to !

accessories. 1 ~f.- 324-..j'f
• with cable entry cover

0 • with blanking strips for unused DIN rail openings

(. • cable entry via integrated elastic membranes
a
0
Ill rated insulation voltage AC 400V
:c>
IIJ

KV 9336 [Q] IP RAL I 5
- 65 LW~II
36 modules: 3 x 12 x 18 mm PS 7035

• 3-row f.- 295->1 j.l ~
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2 Cu,
I --c::::=J
FIXCONNECT0 terminal technology,
for terminal technology refer to technical data 1il c::::=J
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm 1c::::=JJ,
• with transparent door f.- 216-t l
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400 V

KV 8336 5

36 modules: 3 x 12 x 18 mm PS ~L Waii
without PE and N terminal
7035 ~ 5
• 3 -row
• order PEIN terminals separately f.-295-..j j.l ~
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door I c::::=J
• For locking device for door and facility for sealing refer to
Ic::::=J
accessories. c::::=JJ,
• with cable entry cover 1-- 21s--11
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400 V

Call for a Quotel
152 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
Ef"lY BOArD
KV Small-type Distribution Boards
5
Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes PS RAL Lw5all

KV3536 7035

36 modules: 3 x 12 x 18 mm c0.
a
• 3-row 0m
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2 Cu, >c

FIXCONNECT® terminal technology, "'
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV3636 [Q] IP RAL I 5
54
36 modules: 3 x 12 x 18 mm PS 7035 I Waii
without PE and N terminal •5

• 3 -row l-- 295--l !-1 29-t
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm T
• with transparent door
• For locking device for door and facility for sealing refer to I~

accessories. ~~
• with cable entry cover
• with blanking strips for unused DIN rail openings I ~J,
• cable entry via integrated elastic membranes
_._ 'f1-- 216-l

rated insulation voltage AC400V

KV9448 [Q] IP PS ~LI 5
"6"5
48 modules: 4 x 12 x 18 mm I Waii
7035 • 5

• 4-row f--295-+l f-129-t
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2 Cu,
1~
FIXCONNECT® terminal technology,
for terminal technology refer to technical data .~... ~
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm ~
• with transparent door
• For locking device for door and facility for sealing refer to 1~.Is
accessories. !.-216::"'11
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

Call for a Quotel 153
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.

KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 8448

48 modules: 4 x 12 x 18 mm
without PE and N terminal

• 4-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm

• with transparent door
• For locking device for door and facility for sealing refer to

accessories.

• with cable entry cover

• with blanking strips for unused DIN rail openings

0 • cable entry via integrated elastic membranes

(.
a
0
rated insulation voltage AC400V
m
>c
Ill

KV 4548 [Q] ~ PS RAL 1 ~
Wall
48 modules: 4 x 12 x 18 mm 54 7035 ~ 5

• 4-row l---295--l ~29-1
• per PEIN number x cross section 6 x 25 mm2, 24 x 4 mm2 Cu,
I-
FIXCONNECT0 terminal technology, c:==J
for terminal technology refer to technical data
• N separable for various potentials ~ c:==J
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door l c:==J
• For locking device for door and facility for sealing refer to cl-:2=1=6-J-lJ1,
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV 4648 RAL ~
PS 'l 70ls Wall
48 modules: 4 x 12 x 18 mm
without PE and N terminal 5

• 4-row
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to

accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel
154 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV9354 IP PS ,~AL I 6

54 modules: 3 x 18 x 18 mm 65 7035 LW6all

• 3-row fo- 4 0 3 - - - l f-129-j c0.
• per PE/N number x cross section 8 x 25 mm2 , 32 x 4 mm2 Cu. a
11-.
FIXCONNEC"f® terminal technology, 0
for terminal technology refer to technical data - N ri CD
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm I) >c
• with transparent door
• For locking device for door and facility for sealing refer to J; ) Ul
accessories.
• with cable entry cover I ~l-- 324- -l"f
• w ith blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC 400V

KV8354 IP L6

54 modules: 3 x 18 x 18 mm 6s PS 'R7A0L35 w;u
without PE and N terminal
1 - -403- - - l j4129..j
• 3-row
• order PE/N terminals separately I~
• for the installation of DIN rail equipment, top hat profile 35 mm 1g
• with transparent door ._,,_j
• For locking device for door and facility for sealing refer to

accessories.
• w ith cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

KV3554 IP PS ~AL l L~
7035 6
54 modules: 3 x 18 x 18 mm - 54

• 3-row
• per PE/N number x cross section 8 x 25 mm2, 32 x 4 mm2 Cu.

FIXCONNEC"f® terminal technology,
for terminal technology refer to technical data
• N separable for various potentials
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door
• For locking device for door and facility for sealing refer to
accessories.
• with cable entry cover
• with blanking strips for unused DIN rail openings
• cable entry via integrated elastic membranes

rated insulation voltage AC400V

Call for a Quotel 155
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Integrated Elastic Membranes

KV 3654 IP PS ~I 6

54 modules: 3 x 18 x 18 mm - 54 I Wall
without PE and N terminal ~ Us

• 3-row j..-403~ 1-129>\

• order PE/N terminals separately ~~
• for the installation of DIN rail equipment, top hat profile 35 mm
• with transparent door

• For locking device for door and facility for sealing refer to r __,._J.
accessories.

• w ith cable entry cover

• w ith blanking strips for unused DIN rail openings

0 • cable entry via integrated elastic membranes

(.
a
0
CD rated insulation voltage AC 400V
>c

liJ

Call for a Quotel
156 (800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards
0c...
Circuit Breaker Boxes a
Cable Entry via Metric Knockouts
0
Ill

>c

UJ

• Cable I Conduit entry via metric knock- • KV Small-type distribution boards with • Burning behaviour:
outs earthed armoured cables according to Glow wire test according to L...:...._::....::.---':...J
British Standard. IEC 60 695-2-11: 750 °C,
flame-retardant. self-extinguishing

• FlXCONNECT® terminal technology • 12 to 54 modules: • Integrated compartment for accessories -
for PE and N attached blanking strips for DIN rail everything has its proper place.

• Connection for copper conductors equipment openings. • Screws made of stainless steel V2A.

Call for a Quotel 157
(800) 677-8942 I (303) 680-5159

~ HI·TECH www.hitechcontrols.com
~ CONTROLS, INC.
enY eoAro
KV Small-type Distribution Boards

Circuit Breaker Boxes
Cable Entry via Metric Knockouts

KV 7103 PS ( RAL I 9
7035 Wall
3 modules: 1 x 3 x 18 mm ;9

• 1-row

• knockouts : top and bottom walls 2x M20 each

• per PEIN number x cross section 1 x 25 mm2, 4 x 4 mmz Cu,
FIXCO NN EC~ terminal technology,

for terminal technology refer to technical data

• for the installation of DIN rail equipment, top hat profile 35 mm

• w ith transparent lid, sealable

• locking device for hinged lid and sealing facility see accessories

0 • w ith cable entry cover
t..
a • protective cover can be cut out

0m rated insulation voltage AC 400 V
:c>
Ul

KV 6103 [Q] IssIP PS RAL 9
''7035 Wall
3 modules: 1 x 3 x 18 mm
9

without PE and N terminal

• 1-row fo-102..; fo- 92-l
• knockouts : top and bottom walls 2x M20 each
• order PEIN terminals separately !~ ~
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out

rated insulation voltage AC 400 V

KV 7104 IP PS RAL 13

4.5 modules: 1 x 4.5 x 18 mm Wall
65 7035 13

• 1-row
• knockouts: top and bottom walls 2x M20 and 1x M25/32 each
• per PEIN number x cross section 2 x 25 mm2, 4 x 4 mm2 Cu,

FIXCONNEC~ terminal technology,
for terminal technology refer to technical data
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• w ith cable entry cover
• protective cover can be cut out

rated insulation voltage AC 400 V

KV 6104 PS RAL I 13
Wall
4.5 modules: 1 x 4.5 x 18 mm
without PE and N terminal 703' 5 L 13

• 1-row
• knockouts: top and bottom walls 2x M20 and 1x M25/32 each
• order PEIN terminals separately
• for the installation of DIN rail equipment, top hat profile 35 mm
• w ith transparent lid, sealable
• locking device for hinged lid and sealing facility see accessories
• with cable entry cover
• protective cover can be cut out

rated insulation voltage AC 400V

158 Call for a Quotel
(800) 677-8942 I (303) 680-5159