Sealcon Circular Connector Catalog M8 - M40 Power | Signal | Ethernet

M23 power, m23 hybrid connectors

housings

M23 Power Straight Connector, Female Thread Cable-Ø Part Number

3.05” (77.5 mm) 7 – 12 mm (.27 – .47”) ......................... S7.550.500.000
11 – 17 mm (.43 – .67”) ...................... S7.550.600.000

1.07” (27.2 mm)

.94” (24 mm) .94” (24 mm)

M23 Power Straight Connector, Female Thread Cable-Ø Part Number M23 Power
TWILOCK / TWILOCK-S*- Quick Connect 7 – 12 mm (.24 – .47”)..................... S7.556.500.000
11 – 17 mm (.43 – .67”) .................. S7.556.600.000
3.00” (76.4 mm)

ø 1.10” (28 mm) *Intermateable with SpeedTEC® (Twilock-S)
7 – 12 mm (.24 – .47”)..................... S7.556.500.00S
11 – 17 mm (.43 – .67”)................... S7.556.600.00S

.94” (24 mm) .94” (24 mm)

M23 Power Straight Connector, Male Thread Cable-Ø Part Number
TWILOCK / TWILOCK-S*- Quick Connect 7 – 12 mm (.27 – .47”)...................... S7.560.500.000
11 – 17 mm (.43 – .67”).................... S7.560.600.000
2.82” (71.8 mm)

M23 x 1 *Intermateable with SpeedTEC® (Twilock-S)
7 – 12 mm (.24 – .47”)...................... S7.566.500.00S
11 – 17 mm (.43 – .67”).................... S7.566.600.00S

.94” (24 mm) .94” (24 mm)

M23 Power Panel Connector with Strain Relief, Male Thread Cable-Ø Part Number

.94” (24 mm) 4 holes Ø 3.2 mm (.13“), front or rear mounting
7 – 12 mm (.27 – .47”)...................... S7.683.500.000
M23 x 1 11 – 17 mm (.43 – .67”).................... S7.683.600.000
ø 1.02” (26 mm)
1.72” (43.8 mm) .96” (24.6 mm) ø .13” (3.2 mm)
2.82” (71.8 mm) 1.11”
(28.4 mm)
Panel hole 1.37”(35 mm)

1.04” (26.5 + 0.2 mm)

M23 Power Panel Connector with Strain Relief, Female Thread Cable-Ø Part Number

3.07” (78 mm) 1.37” (35 mm) 4 holes Ø 3.2 mm (.13“), front or rear mounting
1.11” (28.4 mm) 7 – 12 mm (.27 – .47”).......................... S7.681.500.000
1.83” (46.5 mm) 1.10”(28 mm) 11 – 17 mm (.43 – .67”)........................ S7.681.600.000

1.07” (27.2 mm)

.94” Panel hole ø .13” (3.2 mm)
(24 mm) 1.07” (27.2 + 0.2 mm) MATES WITH TWILOCK SYSTEM

Does not mate with TWILOCK System

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 51
Dimensions & Specifications are subject to change without prior notice

M23 power, m23 hybrid connectors

housings

M23 Power Panel Connector with Strain Relief, Male Thread Cable-Ø Part Number
TWILOCK / TWILOCK-S*
Single hole mounted, rear mounting, thread M25 x 1.5
2.81” (71.5 mm) 7 – 12 mm (.27 – .47”)...................... S7.653.500.000
1.33” (33.8 mm) 11 – 17 mm (.43 – .67”).................... S7.653.600.000
M23 x 1
M25 x 1.5 *Intermateable with SpeedTEC® (Twilock-S)
.94” (24.1 + 0.1 mm) 7 – 12 mm (.24 – .47”)...................... S7.653.500.00S
11 – 17 mm (.43 – .67”).................... S7.653.600.00S
.94” 1.18” 1.14” .98” (25 + 0.1 mm) Including jam nut M25 x 1.5
(24 mm) (30 mm) (29 mm)
Panel hole max. 14 mm
M23 Power ø .98” (25 + 0.1 mm)

M23 Power Right Angle Connector, Female Thread, Rotatable Cable-Ø Part Number

3.07” (78 mm) 7 – 12 mm (.27 – .47”).........................S7.576.500.000
11 – 17 mm (.43 – .67”) ......................S7.576.600.000

.98” 2.85” (72.5 mm)
.94” (25 mm)
(24 mm)

1.06” ø 1.07 (27.2 mm)
(27 mm)

M23 Power Right Angle Connector, Male Thread, Rotatable Cable-Ø Part Number
7 – 12 mm (.27 – .47”)...................... S7.580.500.000
2.67” (68 mm) 10 – 14 mm (.39 – .55”).................... S7.580.600.000

1.22” (31 mm) .94” .86”
1.02” (26 mm)(24 mm) (22 mm)
.77”
(19.8 mm)
2.85” (72.5 mm)
.94” Type Part Number
(24 mm) 4 holes Ø 3.2 mm (.13”).................... S7.601.000.000
4 holes Ø 2.7 mm (.11”).................... S7.605.000.000
M23 x 1

M23 Power Panel Connectors, Male Thread, Front Mounting
TWILOCK / TWILOCK-S*- Quick Connect

M23 x 1 ø 2.7 /ø 3.2 mm

*Intermateable with SpeedTEC® (Twilock-S)
4 x holes 3.2 mm, Flange 25 x 25...... S7.601.000.00S
4 x holes 3.2 mm, Flange 28 x 28...... S7.601.100.00S

Panel hole Type Part Number
ø .78” (20+ 0.1 mm) 4 holes Ø 3.2 mm (.13”) .................... S7.641.000.000
Optional: Flat gasket....STAD2-7P2510
M23 Power Panel Connector With Knurled Nut, Front Mounting 4 holes Ø 2.7 mm (.11”) .................... S7.645.000.000
Optional: Flat gasket....STAD1-7P2510
ø 1.07”(27.2 mm) ø 2.7 /ø 3.2 mm

1.55 (39.5 mm)
.98” (25 mm)
.77”
(19.8 mm)
Panel hole
MATES WITH TWILOCK SYSTEM ø .78” (20+ 0.1 mm)
Does not mate with TWILOCK System

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
52 Dimensions & Specifications are subject to change without prior notice

M23 power, m23 hybrid connectors

housings

M23 Power Panel Connector, Male Thread, Rear Mounting Type Part Number
With anti-vibration O-Ring S7.661.000.000
M23 x 1 ø 3.2 mm 4 holes Ø 3.2 mm (.13”).....................
1.35” (34.5 mm)
1.27” (32.5 mm) Panel hole

.98” (25 mm)
.80”

(20.5 mm)

max. 12 mm

ø .90” (23.1+ 0.1 mm)

M23 Power Panel Connector, Male Thread, Single Hole Mounted, M20 .75” (19.1 + 0.1 mm) Type Part Number M23 Power
Front mounting S7.621.000.000
M23 x 1 Thread M20 x 1.5...............................

1.61” (41 mm) Options: Flat gasket, jam nut M20 x 1.5

.23” .94” .79” (20.2 + 0.1 mm)
(6 mm) (26 mm) Panel hole

M20 x 1.5 ø .79” (20.2 + 0.1 mm)

M23 Power Panel Connector, Male Thread, Single Hole Mounted, PG 13 Type Part Number
S7.623.000.000
M23 x 1 .75” (19.3 + 0.1 mm) Front mounting
Thread PG 13.5 .................................

1.61” (41 mm) Options: Flat gasket, jam nut PG 13.5

.81” (20.6 + 0.1 mm)

1.02” Panel hole
(26 mm)

.23” PG 13.5 ø .81” (20.6 + 0.1 mm)
(6 mm)

M23 Power Panel Connector, Male Thread, Single Hole Mounted, M25 .94” (24.1 + 0.1 mm) Type Part Number
Front mounting S7.626.000.000
M23 x 1 Thread M25x1.5................................

1.27” (32.5 mm) Options: Flat gasket, jam nut M 25 x 1.5

1.10” .99” (25.2 + 0.1 mm)
(28 mm)

.27” M25 x 1.5 Panel hole
(7 mm)

ø .99” (25.2 + 0.1 mm)

M23 Power Panel Connector, Male Thread, Single Hole Rear Mounted, M25 Type Part Number
Rear mounting S7.651.000.000
M25 x 1.5 .94” (24.1 + 0.1 mm) Thread M25 x 1.5...............................
M23 x 1

1.46 “(37.3 mm) Including jam nut M25 x 1.5
1.33 (33.8 mm)
.98” (25 + 0.1 mm)

1.14” Panel hole max. 8 mm
(29 mm)
1.18” (30 mm) ø .98” (25 + 0.1 mm)

MATES WITH TWILOCK SYSTEM Does not mate with TWILOCK System

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 53
Dimensions & Specifications are subject to change without prior notice

M23 power, m23 hybrid connectors

housings

M23 Power Right Angle Panel Connector, Male Thread, Flange Type Part Number
4 holes Ø 2.7 mm (.11”)..................... S7.635.000.000
2.15” (54.7 mm) Optional: Flat gasket....STAD1-7P2510

ø 2.7 mm Easy fastening with M2.5 x 10 mm
or 4 x .39” long screws
1.35” (34.5 mm)
.98” (25 mm)
.77”
(19.8 mm)

.19” Panel hole
(5 mm) ø .79” (20.1 + 0.1 mm)

M23 Power M23 Power Right Angle Panel Connector, Male Thread, Rotatable Type Part Number
335° Rotatable, single hole mounted S7.636.000.000
2.15” (54.7 mm) Thread M20 x 1.5..............................

1.85” (47.1 mm)
M23 x 1

.29” M20 x 1.5 Panel hole
(7.6 mm) ø .79” (20.2 + 0.1 mm)

M23 Power Right Angle Panel Connector, Male Thread, Rotatable, Flange,
TWILOCK / TWILOCK-S*- Quick Connect Type Part Number

2.25” (57.3 mm) .77” (19.8 mm) 330° Rotatable, 1.5 mm locking screw at flange
4 x holes Ø 3.2 mm,
1.64” (41.8 mm) M23 x 1 Panel hole Flange 25 x 25 mm ............................ S7.639.000.000
Optional: Flat gasket....STAD1-7P2510
.78” (20 + 0.1 mm) 4 x holes Ø 3.2 mm,
ø 3.2 mm Flange 28 x 28 mm............................. S7.639.100.000
1.00” (25.5 mm)

.10” (2.7 mm) .88” (22.6 mm) * Intermateable with SpeedTEC® (Twilock-S)
2.25” (57.3 mm) Panel hole 4 x holes Ø 3.2 mm,
Flange 25 x 25 mm ............................ S7.639.000.00S
Twilock-S options 1.64” (41.8 mm) M23 x 1 78” (20 + 0.1 mm) Optional: Flat gasket....STAD1-7P2510
do not come with ø 3.2 mm 4 x holes Ø 3.2 mm,
a seal ring. 1.10” (28 mm) Flange 28 x 28 mm............................. S7.639.100.00S

.17” (4.5 mm)

M23 Power Right Angle Panel Connector, Male Thread, Rotatable, Flange Type Part Number
300° Rotatable, locking screw at flange S7.638.000.000
2.15” (54.7 mm) .98” (25 mm) 1.10” (28 mm) 4 x holes Ø 2.7 mm (.11”)..................
ø 2.7 ø 3.2 Flange 25 x 25 mm
1.62” (41.2 mm) mm mm Optional: Flat gasket....STAD1-7P2510

.77” (19.8 mm) .88” (22.6 mm) 4 x holes Ø 3.2 mm (.13”)................... S7.638.100.000
Panel hole Flange 28 x 28 mm

.09” ø .79” (20.1 + 0.1 mm)
(2.5 mm)

MATES WITH TWILOCK SYSTEM Does not mate with TWILOCK System

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
54 Dimensions & Specifications are subject to change without prior notice

M23 power, m23 hybrid connectors

Accessories

M23 Power Accessories

Plastic protective cap for connectors Brass protective cap with chain for
with male thread..................................S7.000.900.101 connectors with female thread
with female thread ..............................S7.000.900.102 Length 70 mm............................. S7.010.9S0.783
Length 100 mm.......................... S7.010.9S1.083

Brass protective cap for connectors with Brass protective cap with chain M23 Power
female thread ............................... . S7.010.900.183 for connectors with male thread
Brass protective cap for connectors with Length 70 mm...............................S7.010.9S0.702
male thread.........................................S7.010.900.102 Length 100 mm.............................S7.010.9S1.002
Adaptor flange Crimp tool for manual crimping of machined
for Straight Connectors................... S7.010.900.128 crimp contacts
Conduit adaptor Works with contacts for power or signal
Nylon Conduit DN 12...........................S7.010.900.205 .......................................................S7.000.900.901
Nylon Conduit DN 14............................S7.010.900.207 Positioner for Crimp Tool
Nylon Conduit DN 17............................S7.010.900.209 DMC M22520 ...............................S7.000.900.DMC

Screw Tool, adjustable 0.5 - 1.7 Nm ...........................
.......................................................S7.010.900.190

Tool Adapter for tightening or loosening knurled nuts Locator for Crimp Tool DMC M22520 with
for M23 ...............................................S7.010.900.192 positioner ....................................S7.000.9DM.C06
For Sealcon Contact:
Disassembly Tool S7.010.941.001, S7.010.942.001, S7.010.942.011
for crimp contacts................................S7.010.900.531 Locator for Crimp Tool DMC M22520 with
positioner.......................................S7.000.9DM.C07
For Sealcon Contact:
S7.010.941.002, S7.010.942.002, 7.010.942.012

MATES WITH TWILOCK SYSTEM Does not mate with TWILOCK System

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 55
Dimensions & Specifications are subject to change without prior notice

M23 power, m23 hybrid connectors

inserts, contacts

M23 Power Contact Arrangement, Mating View Number of Poles Required Contacts
6 - pole
TWO-PIECE SNAP-IN *Insert/removal tool S7.010.900.531 required

6 x crimp pins 2 mm.............................................................. ..S7.084.951.121*
6 x crimp sockets 2 mm...........................................................S7.084.951.122*
EUROCLIP
6 x crimp pins 2 mm................................................................ S7.084.951.101
6 x crimp sockets 2 mm.......................................................... S7.084.951.102

TWO-PIECE SNAP-IN *Insert/removal tool S7.010.900.531 required

4 x crimp pins 1 mm, 4 x crimp pins 2 mm.............................. S7.084.943.121*
4 x crimp sockets 1 mm, 4 x crimp sockets 2 mm................. ..S7.084.943.122*
M23 Power 8 - pole EUROCLIP

4 x crimp pins 1 mm, 4 x crimp pins 2 mm.............................. S7.084.943.101
4 x crimp sockets 1 mm, 4 x crimp sockets 2 mm................... S7.084.943.102

9 - pole 5 x crimp pins 1 mm, 4 x crimp pins 2 mm.............................. S7.084.953.101
5 x crimp sockets 1 mm, 4 x crimp sockets 2 mm................... S7.084.953.102

9 - pole 5 x crimp pins 1 mm, 4 x crimp pins 2 mm.............................. S7.084.909.101
5 x crimp sockets 1 mm, 4 x crimp sockets 2 mm................... S7.084.909.102

10 - pole 10 x crimp pins 1 mm.............................................................. S7.084.910.101
10 x crimp sockets 1 mm........................................................ S7.084.910.102

12 - pole HYBRID INSERT - Power, Signal, and Ethernet
M23 Power Contacts
4 each crimp pins 1 mm, 2 mm, 0.6 mm............................... ..S7.084.944.101*
4 each crimp sockets 1 mm, 2 mm, 0.6 mm............................S7.084.944.102*

*Insert/removal tool S7.010.900.531 required for 2mm contacts

Type Crimp Range Part Number

Crimp pin 0.6 mm, machined.......0.08 – 0.34 mm² (AWG28 – AWG 22) ........ S7.010.980.641

Crimp socket 0.6 mm, machined.......0.08 – 0.34 mm² (AWG28 – AWG 22) ............S7.010.980.602

Crimp pin 1 mm, machined...............0.14 – 1 mm2 (AWG 26 – 17) .................S7.010.941.001

Crimp pin 1 mm, machined..............0.75 – 1.5 mm2 (AWG 18 – 16)...............S7.010.941.021

Crimp socket 1 mm, machined..........0.14 – 1 mm2 (AWG 26 – 17) ................S7.010.941.002

Crimp socket 1 mm, machined.........0.75 – 1.5 mm2 (AWG 18 – 16)................S7.010.941.022

Crimp pin 2 mm, machined.............0.75 – 2.5 mm2 (AWG 18 – 14)................S7.010.942.001
Crimp pin 2 mm, machined................2.5 – 4 mm2 (AWG 14 – 12) .................S7.010.942.011

Crimp socket 2 mm, machined........0.75 – 2.5 mm2 (AWG 18 – 14)...............S7.010.942.002

Crimp socket 2 mm, machined...........2.5 – 4 mm2 (AWG 14 – 12) .................S7.010.942.012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
56 Dimensions & Specifications are subject to change without prior notice



M27 signal connectors

reliable data transmission

The M27 Signal connector is available in 26 and 28 Mechanical Data Materials and Technical Data
pole inserts with signal transmission up to 150
Volts and 8 Amps. This connector allows additional Housing Copper-Zinc alloy
pinout options larger than M23 with the same Die Cast
IP67 / IP 69K rating. Operating temperature of up to
257°F (125°C). Available in male and female thread, Housing surface Nickel plated
straight and panel mount housings connectors. Other surface upon request

Inserts Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT
Fire protection class V-0

Contacts Brass Alloy

Contact surface at point of contact Nickel and gold plated (0.25 μm)

Minimum mating cycles 50 (Sealcon to Sealcon connector)

Seals / O-Rings Buna-N, optional FKM

Temperature range -40°F – 257°F (-40°C – 125°C)

Type of contacts Crimp, solder, dip-solder (PCB)

Protection IP 67 / IP 69K per EN 60529 (connected),
NEMA 4x

Cable diameter range .28 – .67” (7 - 17 mm)

M27 Signal Components Needed For A Complete M27 Signal Connector:

- Housing (page 59)
- Insert (page 60)
- Contacts (if crimp contact insert is selected) (page 60)

Electrical Data 26 28
26 28
Number of positions 1 1
Number of contacts 8 8
Contact-Ø [mm] 150 150
Nominal current [A] 1500 1500
Nominal voltage [V~] > 1012 > 1012
Test voltage (Breakdown voltage) [V~]
Insulation resistance [MΩ] 3 3

Max. contact resistance [mΩ] 3 3

Degree of Protection

See technical Information on page 80
*Assembly instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
58 Dimensions & Specifications are subject to change without prior notice

M27 signal connectors

housings, accessories

M27 Signal Straight Connector, Female Thread Cable-Ø Part Number

2.91” (74 mm) 7 – 12 mm (.28 – .47”) ....................................S7.110.500.000
11 – 17 mm (.43 – .67”) ..................................S7.110.600.000

ø 1.18” (30 mm)

1.06” 0.98”
(27 mm) (25 mm)

M27 Signal Straight Connector, Male Thread Cable-Ø Part Number

3.07” (78 mm) 7 – 12 mm (.28 – .47”) ....................................S7.210.500.000
11 – 17 mm (.43 – .67”) ..................................S7.210.600.000

M27 x 1

1.06” 0.98” 1.06” M27 Signal
(27 mm) (25 mm) (27 mm)

M27 Signal Panel Connector, Male Thread, Front Mounting Type Part Number
4 x holes 3.2 mm...............................................S7.410.700.000

M27 x 1 ø 3.2 mm

1.02” (26 mm)
.98” (25 mm)
1.18” (30 mm)
.90” (23 mm)

ø .89” (22.8 mm) Brass protective cap with chain for connectors
Panel hole with female thread
Length 70 mm.................................S7.010.9S0.707
ø .90” (23 + 0.1 mm) Brass protective cap with chain for connectors
with male thread
M27 Signal Accessories Length 70 mm.................................S7.010.9S0.708
Crimp tool for manual crimping of machined crimp
Plastic protective cap for connectors contacts works with contacts for power or signal
with male thread................................S7.000.980.167 .............................................S7.000.900.901 / 904
with female thread.............................S7.000.980.168
Brass protective cap for connectors with
female thread....................................S7.010.900.169
Brass protective cap for connectors with
male thread........................................S7.010.900.170

Assembly Tool.....................................S7.010.900.110

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 59
Dimensions & Specifications are subject to change without prior notice

M27 signal connectors

inserts, Contacts

Inserts 26-pole Type Part Number Part Number

Pinout clockwise Pins Sockets

Insert with solder contacts...........S7.001.926.103................. S7.001.926.104

Insert without contacts.................S7.003.926.101................. S7.003.926.102

Insert with dip solder contacts
Length 10 mm.............................. S7.001.926.127

Insert Pin Mating View Insert Socket Mating View The correct dimension of a connector with dip solder contacts depends on the
(clockwise orientation) (counterclockwise orientation) particular type of housing.

Inserts 28-pole Type Part Number Part Number

Pinout clockwise Pins Sockets

Insert with solder contacts.......... S7.001.928.103 ................. S7.001.928.104

M27 Signal Insert Pin Mating View Insert Socket Mating View
(clockwise orientation) (counterclockwise orientation)

M27 Signal Contact Arrangement Number of Poles Required Contacts

26................................................................................................26 x 1 mm

28................................................................................................28 x 1 mm

M27 Signal Contacts Type Crimp Range Part Number

Crimp pin 1 mm, machined ...........0.14 – 0.56 mm² (AWG26 – AWG 17) .........S7.010.971.001

Crimp socket 1 mm, machined ......0.14 – 0.56 mm² (AWG26 – AWG 17) .........S7.010.971.002

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
60 Dimensions & Specifications are subject to change without prior notice



M40 power connectors Mechanical Data Materials and Technical Data

high power and current Housing Copper-Zinc alloy
Die Cast
The M40 Power connector is built for high power Housing surface
transmission with capabilities up to 600 Volts and Nickel plated
55 Amps. By having specially designed housing, safe Inserts (for contacts) Other Surface upon request
electromagnetic compatibility protection is achieved.
The durable nickel plated brass housing is perfect for Contacts Thermoplastic Polyamide PA 6 (Nylon
rough industrial environments and for various uses, Contact surface at point of contact 6/6), PBT
such as heavy drive applications. Minimum mating cycles Fire protection class V-0
Seals / O-Rings
Temperature range Brass alloy
Type of contacts
Protection Nickel and gold plated (0.25 μm)

Cable diameter range > 500 (Sealcon to Sealcon connector)

Buna-N, optional FKM

-40°F – 257°F (-40°C – 125°C)

Crimp

IP 67 / IP 69K per EN 60 529
(connected), NEMA 4x

.51 -1.10” (13 - 28 mm)

Standard delivery of M40 (size 1.5) Components Needed For A Complete M40 Power Connector:
Power Connector includes Contact Insert.
- Housing (pages 63 - 66)
- Insert Included
- Contacts (page 67)

Electrical Data 2 + 3 + PE 4 + 3 + PE

Number of positions 24 44
Number of contacts
Contact-Ø [mm] 2 3.6 2 3.6
Nominal current [A]
Nominal voltage [V~] degree of protection 3 28 55 28 55
Test voltage (Breakdown voltage) [V~]
Insulation resistance [MΩ] 300 600 300 600
Max. contact resistance [mΩ]
2500 4000 2500 4000

M40 Power > 1013 > 1013

31 31

See technical information on page 80
*Assembly instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
62 Dimensions & Specifications are subject to change without prior notice

M40 power connectors

housings

M40 Power Straight Connector, Female Thread, 6 Position Cable-Ø Part Number

INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 2 + 3 + PE, insert for sockets
13 – 18 mm (.51 – .71”).......................S7.710.623.000
4.37” (111.2 mm) 17 – 24 mm (.67 – .97”).......................S7.710.723.000
21 – 28 mm (.83 – 1.10”).....................S7.710.823.000

ø 1.81” (46 mm)

1.57” 1.49”
(40 mm) (38 mm)

M40 Power Straight Connector, Female Thread, 8 Position Cable-Ø Part Number

INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 4 + 3 + PE, insert for sockets
13 – 18 mm (.51 – .71”).......................S7.710.643.000
4.37” (111.2 mm) 17 – 24 mm (.67 – .97”)........................S7.710.743.000
21 – 28 mm (.83 – 1.10”).....................S7.710.843.000

ø 1.81” (46 mm)

1.57” 1.49”
(40 mm) (38 mm)

M40 Power Straight Connector, Female Thread, 6 Position Cable-Ø Part Number
TWILOCK-S*- Quick Connect
2 + 3 + PE, insert for sockets
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY *Intermateable with SpeedTEC® (Twilock-S)
13 – 18 mm (.51 – .71”)......................S7.716.623.00S*
4.52” (115 mm) 17 – 24 mm (.67 – .97”)......................S7.716.723.00S*
21 – 28 mm (.83 – 1.10”)....................S7.716.823.00S*
ø 1.81” (46 mm) M40 Power

1.57” 1.49”
(40 mm) (38 mm)

M40 Power Straight Connector, Female Thread, 8 Position Cable-Ø Part Number
TWILOCK-S*- Quick Connect
4 + 3 + PE, insert for sockets
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY *Intermateable with SpeedTEC® (Twilock-S)
13 – 18 mm (.51 – .71”)......................S7.716.643.00S*
4.52” (115 mm) 17 – 24 mm (.67 – .97”)......................S7.716.743.00S*
21 – 28 mm (.83 – 1.10”)....................S7.716.843.00S*
ø 1.81” (46 mm)

1.57” 1.49”
(40 mm) (38 mm)

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 *Under Development
Dimensions & Specifications are subject to change without prior notice
63

M40 power connectors Cable-Ø Part Number

housings 2 + 3 + PE, insert for pins
13 – 18 mm (.51 – .71”).......................S7.720.623.000
M40 Power Straight Connector, Male Thread, 6 Positions 17 – 24 mm (.67 – .97”).......................S7.720.723.000
Standard Threaded and TWILOCK-S*- Quick Connect 21 – 28 mm (.83 – 1.10”).....................S7.720.823.000

INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY

4.64” (118 mm)

M40 x 1.5 *Intermateable with SpeedTEC® (Twilock-S)
13 – 18 mm (.51 – .71”)...................... S7.720.623.00S*
1.57” 1.49” 17 – 24 mm (.67 – .97”)...................... S7.720.723.00S*
(40 mm) (38 mm) 21 – 28 mm (.83 – 1.10”)................... S7.720.823.00S*

M40 Power Straight Connector, Male Thread, 8 Positions Cable-Ø Part Number
Standard Threaded and TWILOCK-S*- Quick Connect
4 + 3 + PE, insert for pins
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 13 – 18 mm (.51 – .71”).......................S7.720.643.000
17 – 24 mm (.67 – .97”).......................S7.720.743.000
4.64” (118 mm) 21 – 28 mm (.83 – 1.10”).....................S7.720.843.000

M40 x 1.5 *Intermateable with SpeedTEC® (Twilock-S)
13 – 18 mm (.51 – .71”)...................... S7.720.643.00S*
17 – 24 mm (.67 – .97”)....................... S7.720.743.00S*
21 – 28 mm (.83 – 1.10”)....................S7.720.843.00S*

1.57” 1.49”
(40 mm) (38 mm)

M40 Power M40 Power Panel Connector, Male Thread, Front Mounting, 6 Positions Type Part Number
Standard Threaded and TWILOCK-S*- Quick Connect 2 + 3 + PE, insert for pins
4 holes Ø 4.5 mm (.18”)........................S7.740.023.000
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY
*Intermateable with SpeedTEC® (Twilock-S)
M40 x 1.5 1.18” (30 mm) 4 holes Ø 4.5 mm (.18”)....................... S7.740.023.00S*
ø 4.5 mm
2.01” (51 mm)
Panel hole
1.57” (40 mm) ø 1.25” (32 + 0.1 mm)

M40 Power Panel Connector, Male Thread, Front Mounting, 8 Positions Type Part Number
Standard Threaded and TWILOCK-S*- Quick Connect 4 + 3 + PE, insert for pins
4 holes Ø 4.5 mm (.18”)........................S7.740.043.000
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY
*Intermateable with SpeedTEC® (Twilock-S)
M40 x 1.5 1.18” (30 mm) 4 holes Ø 4.5 mm (.18”)....................... S7.740.043.00S*
ø 4.5
2.01” (51 mm) mm

Panel hole
1.57” (40 mm) 1.25” (32 + 0.1 mm)

*Under Development

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
64 Dimensions & Specifications are subject to change without prior notice

M40 power connectors

housings

M40 Power Panel Connector with Knurled Nut, Front Mounting, 6 Positions Type Part Number
2 + 3 + PE, insert for sockets
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 4 holes Ø 4.5 mm (.18”)........................ S7.744.023.000

ø 1.79” (45.6 mm) 1.18” (30 mm)

1.74” (44.2 mm) 1.57” ø 4.5
(40 mm) mm

1.57” (40 mm)
Panel hole

ø 1.25” (32 + 0.1 mm)

M40 Power Panel Connector With Knurled Nut, Front Mounting, 8 Positions Type Part Number
4 + 3 + PE, insert for sockets
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 4 holes Ø 4.5 mm (.18”)....................... .S7.744.043.000

ø 1.79” (45.6 mm) 1.18” (30 mm)

1.74” (44.2 mm) 1.57” ø 4.5 mm
(40 mm)
1.57” (40 mm)
Panel hole

ø 1.25” (32 + 0.1 mm)

M40 Power Right Angle Panel Connector, Male Thread, 6 Positions Type Part Number
Rotatable TWILOCK-S*- Quick Connect 2 + 3 + PE, insert for pins
*Intermateable with SpeedTEC®
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 4 holes Ø 4.5 mm (.18”).......................S7.749.023.00S*

3.99” (101.55 mm) 1.18” (30 mm) M40 Power

2.72” (69.3 mm) ø 4.5
M40 x 1.5 mm
1.57” (40 mm)
ø 1.00” (25.5 mm) Panel hole
ø 1.25” (32 + 0.1 mm)

M40 Power Right Angle Panel Panel Connector, Male Thread, 8 Positions Type Part Number
Rotatable TWILOCK-S*- Quick Connect 4 + 3 + PE, insert for pins
*Intermateable with SpeedTEC®
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 4 holes Ø 4.5 mm (.18”)........................S7.749.043.00S*

3.99” (101.55 mm) 1.18” (30 mm)

2.72” (69.3 mm) ø 4.5
M40 x 1.5 mm
1.57” (40 mm)
ø 1.00” (25.5 mm) Panel hole

ø 1.25” (32 + 0.1 mm)

* Under Development

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 65
Dimensions & Specifications are subject to change without prior notice

M40 power connectors

housings, accessories

M40 Power Right Angle Panel Connector, Male Thread, Rotatable, 6 Position Type Part Number
2 + 3 + PE, insert for pins
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 1.18” (30 mm) 4 holes Ø 4.5 mm (.18”)........................S7.743.023.000
3.77” (96 mm)

2.71” (69 mm) ø 4.5 mm
M40 x 1.5
1.57” (40 mm)

Panel hole

0.90” (23 mm) ø 1.25” (32+ 0.1 mm)

M40 Power Right Angle Panel Connector, Male Thread, Rotatable, 8 Position Type Part Number
4 + 3 + PE, insert for pins
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY 1.18” (30 mm) 4 holes Ø 4.5 mm (.18”).........................S7.743.043.000
3.77” (96 mm)

2.71” (69 mm) ø 4.5
M40 x 1.5 mm

1.57” (40 mm)
Panel hole

0.90” (23 mm) ø 1.25” (32 + 0.1 mm)

M40 Power Straight Connector, Male Thread, Front Mount, 6 Position Type Part Number
Front mounting, 2 + 3 + PE, insert for pins
INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY M40 x 1.5 Thread M40 x 1.5.................................. S7.742.023.000

2.46” (62.5 mm) 1.10” Panel hole
1.98” (50.5 mm)

M40 Power Straight Connector, 0.47” M40 x 1.5 (28 mm) ø 1.58” (40.2 + 0.1 mm) Type Part Number
Front mounting, 4 + 3 + PE, insert for pins
(M12 ammle) Thread, Front Mount, 8 Position Thread M40 x 1.5..................................S7.742.043.000

INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY

M40 x 1.5

M40 Power 2.46” (62.5 mm)
1.98” (50.5 mm)
Panel hole
0.47” M40 x 1.5 1.10”
(12 mm) (28 mm) ø 1.58” (40.2 + 0.1 mm)

M40 Power Accessories

Plastic protective cap for connectors Crimp tool for manual crimping of machined
with female thread............................... S7.000.900.152 crimp contacts up to 10 mm2 (AWG 8)
for power connectors ..................... S7.000.900.902
Plastic protective cap for connectors Crimp tool for manual crimping of machined
with male thread................................. S7.000.900.151 crimp contacts 16 mm2 (AWG 6) .... S7.000.900.903
Brass protective cap with rope for connectors with
Brass protective cap for connectors with female thread ................................ S7.015.9S1.003
female thread...................................... S7.015.900.103 Brass protective cap with rope for connectors with
male thread ................................... S7.015.9S1.002
Brass protective cap for connectors with Conduit adaptor
male thread......................................... S7.015.900.102 Nylon Conduit DN 23...................... S7.010.900.215
Nylon Conduit DN 29...................... S7.010.900.217
Adaptor flange
for Straight Connectors........................ S7.010.900.129

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
66 Dimensions & Specifications are subject to change without prior notice

M40 power connectors

Inserts, COntacts

M40 Power Contact Arrangement, Mating View Number of Poles Required Contacts

INSERTS INCLUDED, CONTACTS ORDERED SEPARATELY

Insert for pins 2 + 3 + PE................................................2 x crimp pins 2 mm
....................................................................................... 4 x crimp pins 3.6 mm

Insert for sockets 2 + 3 + PE.....................................2 x crimp sockets 2 mm
................................................................................. 4 x crimp sockets 3.6 mm

Insert for pins 4 + 3 + PE............................................... 4 x crimp pins 2 mm
.......................................................................................4 x crimp pins 3.6 mm

Insert for sockets 4 + 3 + PE..................................... 4 x crimp sockets 2 mm
..................................................................................4 x crimp sockets 3.6 mm

*Under Development

M40 Power Contacts Type Crimp Range Part Number

Crimp pin 2 mm, machined............0.25 – 1 mm2 (AWG 24 – 17).................S7.015.952.003*
Crimp pin 2 mm, machined............0.75 – 4 mm2 (AWG 18 – 12) ...............S7.015.952.001

Crimp Socket 2 mm, machined......0.25 – 1 mm2 (AWG 24 – 17) .................S7.015.952.004*
Crimp socket 2 mm, machined......0.75 – 4 mm2 (AWG 18 – 12) ............... S7.015.952.002

Crimp pin 3.6 mm, machined..........1.5 – 4 mm2 (AWG 16 – 12).................S7.015.953.601 M40 Power

Crimp socket 3.6 mm, machined ...1.5 – 4 mm2 (AWG 16 – 12)..................S7.015.953.602

Crimp pin 3.6 mm, machined..................6 mm2 (AWG 10)...........................S7.015.953.611

Crimp socket 3.6 mm, machined ...........6 mm2 (AWG 10)............................ S7.015.953.612
Crimp pin 3.6 mm, machined.................10 mm2 (AWG 8)............................ S7.015.953.621
Crimp pin 3.6 mm, machined.................10 mm2 (AWG 8)............................ S7.015.953.623
Crimp socket 3.6 mm, machined ...........10 mm2 (AWG 8)........................... S7.015.953.622
Crimp socket 3.6 mm, machined ...........10 mm2 (AWG 8)............................ S7.015.953.624
Crimp pin 3.6 mm, machined.................16 mm2 (AWG 6)............................S7.015.953.631

Crimp socket 3.6 mm, machined............16 mm2 (AWG 6)............................S7.015.953.632

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 67
Dimensions & Specifications are subject to change without prior notice

M16/M23 Stainless Steel connectors

for extremely rough or hygienic uses

Mechanical Data Materials and Technical Data Special applications require special solutions.
When extremely rough or hazardous
Housing Stainless Steel 316L environments are a concern, 316L Stainless
Steel options are available. Offered in the same
Housing surface Clear pin-out configurations as the standard
Inserts connectors, stainless steel housings will exceed
Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT your demands. Available in M16, and M23 sizes,
Contacts Fire protection class V-0 other sizes are available by special order.
Contact surface at point of contact
Minimum mating cycles Brass Alloy
Seals / O-Rings
Temperature range Nickel and gold plated (0.25 μm)
Type of contacts signal M23
Type of contacts power M23 > 1000 (Sealcon to Sealcon connector)
Type of contacts M16
Protection FKM, optional EPDM

-40°F – 257°F (-40°C – 125°C)

Crimp, solder, dip-solder (PCB)

Crimp

Crimp, dip-solder (PCB)

IP 67 / IP 69K per EN 60529 (connected),
NEMA 4x

Additional Information page 19 Inserts and contacts see standard product pages 24 - 26
page 37 pages 44 - 48
Electrical data see standard product page 50 M16 Connectors page 56
M23 Signal Connectors
M16 Connectors M23 Power Connectors
M23 Signal Connectors
M23 Power Connectors

INOX - Stainless Steel *Stainless steel housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options.

We do not recommend disconnecting or connecting Sealcon Connectors under load.
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
68 Dimensions & Specifications are subject to change without prior notice

M16/M23 Stainless Steel connectors

housings

M16 Straight Connector, Female Thread Cable-Ø Part Number

1.82” (46.3 mm) 3 – 6 mm (.12“ – .24”)...................................... S7.814.300.000
5 – 9 mm (.20“ – .35”)...................................... S7.814.400.000
ø 0.77” (19.7 mm) 8 – 11 mm (.31“ – .43”).................................... S7.814.500.000

.70” .70”
(18 mm) (18 mm)

M16 Straight Connector, Male Thread Cable-Ø Part Number

1.88” (47.9 mm) 3 – 6 mm (.12“ – .24”)....................................... S7.824.300.000
5 – 9 mm (.20“ – .35”)...................................... S7.824.400.000
8 – 11 mm (.31“ – .43”).................................... S7.824.500.000

M16 x 0.75

.70” .70” Type Part Number
(18 mm) (18 mm) 4 x holes Ø 2.7 mm (.11”)................................. S7.840.400.000
Flange 20 x 20 mm
M16 Panel Connector, Male Thread .78” (20 mm)
ø 2.7
M16 x 0.75 mm

.92” (23.5 mm)
.59” (15 mm)
Panel hole Cable-Ø Part Part Number
Number EMI
ø .59” (15 + 0.1 mm)
3 – 7 mm (.12 – .28”)....... S7.140.300.000 S7.141.300.000
M23 Signal Straight Connector, Female Thread 5 – 10 mm (.20 – .39”)..... S7.140.400.000 S7.141.400.000
7 – 12 mm (.27 – .47”)..... S7.140.500.000 S7.141.500.000
2.32” (59 mm) 10 – 14 mm (.39 – .55”)... S7.140.600.000 S7.141.600.000

ø 1.03” (26.2 mm) Assembly tool S7.010.900.127 is required

.94” .86”
(24 mm) (22 mm)

M23 Signal Straight Connector, Male Thread Cable-Ø Part Part Number
Number EMI

2.42” (61.5 mm) 3 – 7 mm (.12 – .28”) ...... S7.240.300.000 S7.241.300.000 INOX - Stainless Steel
5 – 10 mm (.20 – .39”)...... S7.240.400.000 S7.241.400.000
7 – 12 mm (.27 – .47”)...... S7.240.500.000 S7.241.500.000
10 – 14 mm (.39 – .55”)... S7.240.600.000 S7.241.600.000

M23 x 1

.94” .86”
(24 mm) (22 mm)

Stainless steel housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 69
Dimensions & Specifications are subject to change without prior notice

M16/M23 Stainless Steel connectors

housings

M23 Signal Panel Connector, Male Thread, Single Hole Mounted Type Part Number
Front mounting for male inserts
MALE INSERTS ONLY Thread M20 x 1.5.................................. S7.420.400.000

M23 x 1

.92” (23.5 mm)
.75” (19.1
+ 0.1 mm)
.79” (20.2 + 0.1 mm)

.94” M20 x 1.5 .23” Panel hole
(24 mm) (6 mm)

M 20 x 1.5
(20.2 + 0.1 mm)

M23 Signal Panel Connector, Male Thread, Single Hole Mounted Type Part Number
Front mounting for female inserts
FEMALE INSERTS ONLY Thread M20 x 1.5.................................. S7.421.400.000

M23 x 1
1.24” (31.5 mm)
.94” (24 mm)
.75” (19.1
+ 0.1 mm)
.79” (20.2 + 0.1 mm)

.23” (6 mm) Panel hole
M20 x 1.5 M 20 x 1.5
20.2 + 0.1 mm
M23 Signal Panel Connector, Male Thread
Type Part Number
FEMALE INSERTS ONLY With anti-vibration O-Ring
4 holes Ø 3.2 mm (.13”)......................... S7.410.400.000
M23 x 1 .98” (25 mm)
ø 3.2 mm Type Part Number
.88” (22.5 mm) 4 holes Ø 2.7 mm (.11”)........................ S7.430.400.000
.84” (21.5 mm) Panel hole
.77” (19.8 mm) ø.79” (20.1 + 0.1 mm) Type Part Number
ø.77” (19.8 mm) 7 – 12 mm (.27 – .47”).......................... S7.554.500.000
11 – 17 mm (.43 – .67”)........................ S7.554.600.000
M23 Signal Right Angle Panel Connector, Male Thread

1.96” (50 mm) .98” (25 mm)
ø 2.7
1.58” (40.2 mm) mm
M23 x 1
.77” (19.8 mm)
INOX - Stainless Steel ø .77” (19.8 mm) Panel hole

ø .79” (20.1 + 0.1 mm)

M23 Power Straight Connector, Female Thread

2.94” (74.8 mm)

ø 1.02” (26 mm)

1.06” .94
(27 mm) (24 mm)

Stainless steel housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
70 Dimensions & Specifications are subject to change without prior notice

M16/M23 Stainless Steel connectors

housings

M23 Power Straight Connector, Male Thread Type Part Number
7 – 12 mm (.27 – .47”)......................... S7.564.500.000
2.74” (69.6 mm) 11 – 17 mm (.43 – .67”)....................... S7.564.600.000

M23 x 1

1.06” .94
(27 mm) (24 mm)

M23 Power Panel Connector, Male Thread, Single Hole Mounted Type Part Number
Front mounting
M23 x 1 Thread M20 x 1.5................................. S7.621.400.000

1.61” (41 mm) .75” (19.1
+ 0.1 mm)

.79” (20.2 + 0.1 mm)

1.02” Panel hole
(26 mm)

.23” M20 x 1.5 ø .79” (20.2 + 0.1 mm)
(6 mm)

M23 Power Panel Connector, Male Thread Type Part Number
For front mounting
M23 x 1 .98” (25 mm) 4 holes Ø 3.2 mm (.13”)....................... S7.601.400.000
ø 3.2
1.27” (32.5 mm) mm Optional: Flat gasket

Panel hole
.77” (19.8 mm) ø .78” (20 + 0.1 mm)

M23 Power Right Angle Panel Connector, Male Thread .98” (25 mm) Type Part Number
4 holes Ø 2.7 mm (.11”)....................... S7.630.400.000
1.96” (50 mm)

1.58” (40.2 mm) M23 x 1 ø 2.7
mm

ø .77” (19.8 mm) .77” (19.8 mm) INOX - Stainless Steel
Panel hole
ø .78” (20 + 0.1 mm)

Stainless steel housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 71
Dimensions & Specifications are subject to change without prior notice

M16/M23 Stainless Steel connectors

Accessories

M16/M23 Stainless Steel Accessories

Plastic protective cap for connectors Assembly tool................................. S7.010.900.127
M16 with male thread ........................ S7.000.980.161

Plastic protective cap for connectors Stainless steel protective cap with rope for
M16 with female thread..................... S7.000.980.162 M16 connector with female thread
Plastic protective cap for connectors 70 mm ........................................... S7.010.9S4.163
M23 with male thread........................ S7.000.900.101 Stainless Steel protective cap with rope for
Plastic protective cap for connectors M23 Signal connectors with female thread
M23 with female thread .................... S7.000.900.102 100 mm ......................................... S7.010.9S4.103
Stainless Steel protective cap with rope for
Stainless steel protective cap for connectors M23 Power connectors with female thread
M16 with female thread .................... S7.010.904.163 100 mm ......................................... S7.010.9S4.183
Stainless steel protective cap for connectors
M23 Signal with female thread ......... S7.010.904.103 Stainless steel protective cap with rope for
Stainless steel protective cap for connectors M16 connectors with male thread
M23 Power with female thread .......... S7.010.904.183 70mm............................................. S7.010.9S4.162
Stainless steel protective cap with rope for
Stainless steel protective cap for connectors M23 connectors with male thread
M16 with male thread ...................... S7.010.904.162 100mm .......................................... S7.010.9S4.102

Stainless steel protective cap for connectors Crimp tool for manual crimping of machined crimp
M23 with male thread ....................... S7.010.904.102 contacts works with contacts for power or signal
............................................ S7.000.900.901 / 904

Crimp tool for manual crimping of machined crimp
contacts for signal connectors
M16 and M23.................................... S7.000.900.904

INOX - Stainless Steel

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
72 Dimensions & Specifications are subject to change without prior notice

M12/M16/M23 molded cordsets Molded Cordsets

M12, M16, M23 custom OVERmolded SOLUTIONS

Mechanical Data Materials and Technical Data All cable and coupling connectors in the standard
field attachable series are also available as an
Housing Copper-Zinc alloy overmolded option. This includes M12, M16,
Die Casting M23 Signal and Power connectors. Sealcon along
Molded strain relief with its value-added partners, has the capability
Housing surface Polyurethane PUR of building custom configurations to your exact
Inserts field attachable specifications. Whether you are
Nickel plated brass, black strain relief looking for a certain cable, connector material, or
Contacts color, we can source and provide you a complete
Contact surface at point of contact Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT Fire solution to save you time and overhead.
Seals / O-Rings protection class V-0
Temperature range
Type of contacts Brass alloy
Protection
Cable stlye Nickel and gold plated (0.25 μm)
Labeling
Buna-N, optional FKM

-40°F – 257°F (-40°C – 125°C)

Crimp

IP 67 / IP 69K per EN 60529 (connected), NEMA 4x

Cable specifications available upon request

HUMMEL logo as standard, other options available
upon request

Additional Information page 13 Inserts and contacts see standard product page 17
page 19 pages 24 - 26
Electrical data see standard product page 37 M12 Connectors pages 44 - 48
page 50 M16 Connectors page 56
M12 Connectors M23 Signal Connectors
M16 Connectors M23 Power Connectors
M23 Signal Connectors
M23 Power Connectors

*Custom solutions may require longer lead times and minimum quantities.
*Molded connector cordsets are also available as Stainless Steel (INOX) Versions.
We do not recommend disconnecting or connecting Sealcon Connectors under load.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 73
Dimensions & Specifications are subject to change without prior notice

Molded Cordsets M12/M16 molded cordsets

custom M12 & M16 SIGNAL OVERMOLDED SOLUTIONS

M12 Straight Molded Cordset, Male Thread M16 Straight Molded Cordset, Female Thread

1.96” (50 mm) 1.96” (50 mm)

ø .62” (16 mm) M16 x 0.75

Custom Part Number Custom Part Number

M12 Straight Molded Cordset, Female Thread M16 Right Angle Molded Cordset, Female Thread

1.85” (47 mm) 1.61” (41 mm)

ø .62” (16 mm) 1.57” (40 mm)

Custom Part Number M16 x 0.75
Custom Part Number
M12 Right Angle Molded Cordset, Male Thread
1.33” (34 mm) M16 Insert Options
1.53” (39 mm)
- Inserts (pages 24 - 26)
ø .62” (16 mm)
Custom Part Number Housing only

M12 Right Angle Molded Cordset, Female Thread

1.53” (39 mm)

1.21” (30.9 mm)

ø .62” (16 mm)
Custom Part Number

M12 Insert Options

- Inserts (page 17)

*Please contact Sealcon for more information on specifications, configurations, and custom products.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
74 Dimensions & Specifications are subject to change without prior notice

M23 molded cordsets Molded Cordsets

custom M23 Signal & Power OVERMOLDED SOLUTIONS

M23 Signal Straight Molded Cordset, Female Thread M23 Power Straight Molded Cordset, Female Thread

ø 1.05” (26.9 mm) 3.14” (80 mm) ø 1.05” (26.9 mm) 3.14” (80 mm)

Custom Part Number Custom Part Number

M23 x 1M23 Signal Straight Molded Cordset, Male Thread M23 Power Straight Molded Cordset, Male ThreadM23 x 1

3.14” (80 mm) 3.14” (80 mm)

Custom Part Number Custom Part Number

M23 Signal Right Angle Molded Cordset, Female Thread M23 Power Right Angle Molded Cordset, Female Thread

2.79” (71 mm) 2.79” (71 mm)

2.36” (60 mm) 2.36” (60 mm)

1.05” (26.9 mm) 1.05” (26.9 mm)
Custom Part Number Custom Part Number

M23 Signal Right Angle Molded Cordset, Male Thread M23 Power Right Angle Molded Cordset, Male Thread

2.79” (71 mm) 2.79” (71 mm)

2.40” (61 mm) 2.22” (56.5 mm)

M23 x 1 M23 x 1
Custom Part Number Custom Part Number

M23 Signal Insert Options M23 Power Insert Options

- Inserts (pages 44 - 48) - Inserts (page 56)

*Please contact Sealcon for more information on specifications, configurations, and custom products.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 75
Dimensions & Specifications are subject to change without prior notice

M23 RJ45 ethernet solutions for hazardous LOCATIONS

Ex-i RJ45 Ethernet Connectors

Ex-i RJ45 Mechanical Data Materials and Technical Data The Ex-i RJ45 connector series is an intrinsically
safe ethernet solution for low voltage
Housing Brass Alloy applications, available in Nickel Plated Brass
Die Cast and Stainless Steel (316L). The Ex-i RJ45 is EMI
Housing surface Nickel Plated Brass or Stainless Steel 316L ready, liquid-tight and easily assembled with
Inserts (for contacts) PBT UL-94 V0, PA 6 a NEMA 4x rating. Its sturdy, impact-resistant
Contacts Brass Alloy design is ideal for industrial environments with
Contact surface at point of contact Depends On RJ45 Type Used CAT 5, 5e or CAT 6a requirements. Available
Seals / O-Rings NBR / FKM in both cable connector and panel connector
Temperature range Depends On RJ45 Type Used housings. This robust solution achieves an IP 67/
Degree of Protection IP 67 / 69K per EN 60529 (mated) IP 69K protection class per
Cable diameter range 3 – 7 / 7 – 12 / 11 – 17 mm EN 60529 when mated.
Number of Positions 4 / 6 / 8 poles, optional 4 + 2 / 6 + 2 / 8 + 2
Nominal Current [A] Depends On RJ45 Type Used
Nominal Voltage [V~] Depends On RJ45 Type Used
Test Voltage [V~] Depends On RJ45 Type Used
Insulation Resistance [MΩ] Depends On RJ45 Type Used
Max. Crossover Resistance [mΩ] Depends On RJ45 Type Used
Max. Data Rate Depends On RJ45 Type Used, IAW CAT5/5e/6a

Components Needed For A Complete Ex-i RJ45 Connector: Ex-i RJ45 Approvals:
BVS 11 Atex E 177
- Housing (pages 76 - 77)
- Insert Not Included (contact Sealcon for more information) II M1 Ex ia I Ma
II 1 G Ex ia IIC Ta Ga

IECEx

M23 Rj45 Ex-i Straight Connector, Female Thread Cable-Ø Part Number

Nickel plated brass .16” - .28” (4 - 7 mm)........................ .. S7.R10.408.700
Straight, Female Thread
.94” (24 mm) .94” (24 mm)

M23 x 1 .24” - .47” (6 - 12 mm)............................. S7.R10.508.700
1.18” (30 mm) Straight, Female Thread

.43” - .67” (11 - 17 mm).......................... S7.R10.608.700
Straight, Female Thread

2.68” (68.22 mm) Cable-Ø Part Number

M23 Rj45 Ex-i Straight Connector, Female Thread .16” - .28” (4 - 7 mm)............................... S7.R10.408.740
Straight, Female Thread w/ FKM o-rings
STAINLESS STEEL 316L
.94” (24 mm) M23 x 1 .24” - .47” (6 - 12 mm)............................. S7.R10.508.740
1.18” (30 mm) Straight, Female Thread w/ FKM o-rings
1.06” (27 mm)
.43” - .67” (11 - 17 mm)........................... S7.R10.608.740
2.60” (66.20 mm) Straight, Female Thread w/ FKM o-rings

Housing Only. Field Attachable RJ45 Connectors not included. More InformatioN
Can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

76 DimewDnsiwwmiowwen.nwSss.ei&SoanelSscapo&lcenoScUnipfSUeicAcSai.fActicio.ocamnotismo|na(|sr3ea(03rse3u0)sb3u6j)eb96jce99tc-t91ot1-o1c31ch5h3aan|5ng(|ge8e(0w8w0i0it)h04o)5uu4t6t5pp-6r9ri-io0o9r1r0n2n1oot2itciece

M23 RJ45 ethernet solutions for hazardous LOCATIONS

Ex-i RJ45 Ethernet Connectors

M23 Rj45 Ex-i Panel Connector Rear Mount, Dip Solder Insert Type Part Number
4 holes 2.5 mm, Flange........................ S7.R45.008.700
Nickel plated brass M23 x 1 .07” Incl. 8 poles dip solder insert
(2 mm) .82” (21 mm)

.09”
(2.5 mm)
.80” (20.5 mm)
.98” (25 mm)

M23 Rj45 Ex-i Panel Connector Rear Mount, Dip Solder Insert Type Part Number
4 holes 2.5 mm, Flange.......................... S7.R45.008.740
STAINLESS STEEL 316L .90” (23 mm) Incl. 8 poles dip solder insert w/ FKM o-rings Ex-i RJ45

M23 x 1 1.05” (26.8 mm)
1.18” (30 mm)
.82” (21 mm)
.11” (3 mm)
.11” .85” (21.8 mm)
(3 mm)

M23 Rj45 Ex-i Panel Connector Rear Mount w/ Cable Gland Type Part Number
4 holes 2.5 mm, Flange........................... S7.R47.408.700
Nickel plated brass Cable-Ø: .16” - .28” (4 - 7 mm)
.90” (23 mm) Incl. 8 pole coupler w/ cable gland
.94” (24 mm)

M23 x 1
.11” (3 mm)

.98” (25 mm) 1.18” (30 mm)
3.11” (79 mm)
.90” (23 mm) Type Part Number
M23 Rj45 Ex-i Panel Connector Rear Mount w/ Cable Gland 4 holes 2.5 mm, Flange......................... S7.R47.408.740
Cable-Ø: .16” - .28” (4 - 7 mm)
STAINLESS STEEL 316L Incl. 8 pole coupler w/ cable gland and FKM o-rings
1.06” (27 mm)
M23 x 1
1.16” (29.5 mm) .11” (3 mm)

.98” (25 mm) 1.18” (30 mm)
3.03” (77 mm)
Type Part Number
M23 Rj45 Ex-i Panel Connector Single Thru-Hole Single Thru-Hole................................... S7.R50.008.700
Incl. 8 pole coupler male thread rear mount
Nickel plated brass M25 x 1.5
M23 x 1

1.36” (34.6 mm) 1.14” (29 mm)
1.22” (31.1 mm)
1.18” (30 mm)

1.29” (32.9 mm)

M23 Rj45 Ex-i Panel Connector Single Thru-Hole Type Part Number
Single Thru-Hole.................................... S7.R50.008.740
STAINLESS STEEL 316L M23 x 1 Incl. 8 pole coupler w/ FKM o-rings

1.43” (36.5 mm) 1.14” (29 mm) Housing Only. Field Attachable RJ45 Connectors not included. More InformatioN
1.22” (31 mm) 1.18” (30 mm) Can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

1.29” (32.9 mm)

DimDeiwmnsweinowsn.iSsone&sa&lScpoSenpcUeicfSicfAiac.catiotoimonns|saa(r3ree0s3u)bb6jjee9cc9ttt-to1o1cch3ha5ann|geg(e8w0iwth0ito)hu4ot5up6trip-o9ri0no1ort2nicoetice 77

custom Solutions

design and manufacturing capabilities

Whether you are looking for a custom
configuration or a specialty product, we have
options available. With a vertically integrated,
design, manufacturing, and distribution
system, we can manufacture what you need.
Contact us today for more information.

In addition to the integrated strain relief, the Distribution-boxes are known as important
flex nut adds kink protection to a cable – components for applications in automation.
available for all connector sizes. Robust and fully wired they are done according
to customers specification. The connection
achieves the protection class IP 67.

An integrated metalized EMI clamping insert Sealcon offers custom adapters for ANACONDA
grounds to the braid, significantly simplifying conduit systems in rugged locations.
the assembly of the elbow connector. The
connection achieves the protection class IP 67.

With the multi-insert, it is possible to set an ethernet and a power cable or multiple cables into one connector.
The connection achieves the protection class IP 67.

78 Dimewnswiown.Sse&alScpoencUifSicAa.ctioomns|a(r3e0s3u)b6je9c9t-t1o1c3h5an|g(e80w0it)h4o5u6t p-9ri0o1r 2notice

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 Sealcon offers additional cable
Dimensions & Specifications may be changed without prior notice management solutions, consisting of:

• Cable Glands / Cord Grips
• Conduit Systems
• Adapters, Reducers, and Enlargers
• Locking Nuts
• Enclosures

Further information on the products presented here and everything else Sealcon has to offer 79
can be found on our website:
www.SealconUSA.com

Our website is consistently updated with new information. Sealcon catalogs, product announcements,
videos and reference guides are also available for download online.

DiDmiwmewnesnwiso.wiSon.neSssae&&laclSoScpnpoeUncSUiifAfSiicc.Acaa.otctimiooonmn|ssa|(a3re(r03es30us)3bu6j)be96jce9tct-9o1t-1tcoh31ac53nh5|gaen|(8wg(0e8ith0wo)0iut4)ht54op65rui-6ot9rp-09nr1io0ot21ric2neotice

Technical Information

Technical Information Nominal Current Additional Remarks (Pollution Level)
Allowable current (Amp), that can be transmitted by If connectors being defined for pollution degree 1
each contact continuously and simultaneously. and overvoltage category 1 are applied for other
conditions (higher pollution degree and higher
Nominal Voltage overvoltage category), voltage levels reduce
Allowable voltage (Volt), that can be applied to each correspondingly. But the connectors can be used
contact continuously and simultaneously. without any problems at reduced maximum voltages.

Test Voltage Mating Cycles
Voltage which, under certain conditions, a Mating cycles are the number of insertion and
connector can be exposed to without breakdown. extraction cycles a connector can withstand before
the electrical or mechanical failure in relationship
Degree of Protection to the connector’s design specification.
Potential dirt accumulation of a disconnected
connector in a certain environment. Air Gap
The minimum gap of air between two conducting
Degree of Protection 2 surfaces permissible at given voltage.
No permanent conductive dirt accumulation will
occur. Temporary conductive dirt accumulation, Creep Distance
such as condensation, is possible. Typical for The minimum dimension along the surface of
households, offices, laboratories and test labs. an insulating material between two conducting
surfaces.
Degree of Protection 3
Conductive, as well as dry non-conductive dirt PE
accumulation can occur. It can be temporarily The PE-Contact is a ground contact for security
conductive due to condensation. Typical for reasons.
industrial and factory environments.
Safety Guidelines
When Sealcon connectors are used for voltages
greater than 50 Volts with conductive shell
components they must be used in accordance with
the safety regulations DIN VDE Part 410;
IEC 60364-4-41. This regulation basically dictates
that the power source should be turned off before
mating and unmating connector. This regulation
does not provide protection against electrical shock
when mating and unmating connectors in the field.

Do not connect or disconnect
Sealcon Connectors under load.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
80 Dimensions & Specifications are subject to change without prior notice

Technical Information

Derating M12 Power K+ L Coding Derating M12 Power S+T Coding

Straight Connectors Straight Connectors
Male + Female M12 Male + Female M12
Power Power

K- / L-Coding, S-/T-Coding,
wires 4 x 16 AWG wires 4 x 16 AWG

Derating M16 Derating TWINTUS Technical Information

Straight Connectors TWINTUS and Straight
Male + Female M16 Connector Female M16

10 Pole, 4+3+PE,
wires 10 x 18 AWG wires 14 AWG (Power)
10 pole,
wires 26 AWG

Derating M23 Signal Derating M23 Power

Straight Connectors Straight Connectors
Male + Female M23 Male + Female M23

Wires 12 x 17 AWG 5 + PE,
wires 5 x 12 AWG

Derating M40 (Size 1.5)

Straight Connectors
Male + Female M40
Wires 3 x 6 AWG

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 81
Dimensions & Specifications are subject to change without prior notice

Index

Part Number Page Part Number Page Part Number Page

Index S7.000.848.101...............................23 S7.003.983......................................24 S7.010.9S0.705...............................23
S7.000.848.102...............................23 S7.003.985......................................25 S7.010.9S0.707................................59
S7.000.900.101..........30,35,43,55,72 S7.003.988......................................25 S7.010.9S0.708...............................59
S7.000.900.102..........30,35,43,55,72 S7.004.912......................................45 S7.010.9S0.783.....................30, 35, 55
S7.000.900.151...............................66 S7.004.917.......................................46 S7.010.9S1.002.....................35, 43, 55
S7.000.900.152...............................66 S7.004.981......................................45 S7.010.9S1.003...............................43
S7.000.900.901.....................55,59,72 S7.010.900.101................................43 S7.010.9S1.083.....................30, 35, 55
S7.000.900.902...............................66 S7.010.900.102.........................35, 55 S7.010.9S4.102................................72
S7.000.900.903...............................66 S7.010.900.103...............................43 S7.010.9S4.103................................72
S7.000.900.904...............23,43,59,72 S7.010.900.110................................59 S7.010.9S4.162................................72
S7.000.900.906...............................30 S7.010.900.127................................72 S7.010.9S4.163................................72
S7.000.900.907................................30 S7.010.900.128.............30, 35, 43, 55 S7.101.9S4.183................................72
S7.000.900.908...............................16 S7.010.900.129 ...............................66 S7.015.900.102...............................66
S7.000.900.DMC........................43, 55 S7.010.900.135...............................23 S7.015.900.103...............................66
S7.000.980.161..........................23,72 S7.010.900.139...............................30 S7.015.9S1.002...............................66
S7.000.980.162..........................23,72 S7.010.900.14..................................30 S7.015.9S1.003...............................66
S7.000.980.167................................59 S7.010.900.151................................23 S7.015.95.........................................67
S7.000.980.168...............................59 S7.010.900.162...............................23 S7.053.9.....................................24, 25
S7.000.9DM.C03..............................43 S7.010.900.163...............................23 S7.084.............................................56
S7.000.9DM.C04..............................43 S7.010.900.169...............................59 S7.105..............................................43
S7.000.9DM.C06..............................55 S7.010.900.170................................59 S7.106..............................................38
S7.000.9DM.C07...............................55 S7.010.900.183...................30, 35, 55 S7.108..............................................29
S7.001.903.......................................24 S7.010.900.190.......16, 23, 35, 43, 55 S7.110..............................................59
S7.001.906......................................44 S7.010.900.191...........................16,23 S7.140..............................................69
S7.001.907.......................................44 S7.010.900.192...................35, 43, 55 S7.141..............................................69
S7.001.908.......................................24 S7.010.900.200...............................23 S7.166..............................................38
S7.001.910.......................................25 S7.010.900.202...............................23 S7.206..............................................38
S7.001.912.......................................45 S7.010.900.205.............30, 35, 43, 55 S7.208..............................................29
S7.001.916.......................................46 S7.010.900.207..............30, 35, 43, 55 S7.210..............................................59
S7.001.917.......................................46 S7.010.900.209.............30, 35, 43, 55 S7.240..............................................69
S7.001.919.......................................47 S7.010.900.215...............................66 S7.241..............................................69
S7.001.920......................................30 S7.010.900.217................................66 S7.300..............................................39
S7.001.926......................................60 S7.010.900.531...............................55 S7.301..............................................39
S7.001.928......................................60 S7.010.901.001....................24, 26, 48 S7.306..............................................39
S7.001.943.......................................24 S7.010.901.002.............24, 26, 30, 48 S7.308..............................................29
S7.001.961.......................................25 S7.010.901.012..............24, 26, 30, 48 S7.400..............................................39
S7.000.980......................................59 S7.010.901.021................................48 S7.402..............................................39
S7.001.981.......................................44 S7.010.901.022.........................30, 48 S7.404..............................................39
S7.001.983.......................................24 S7.010.901.031................................48 S7.406..............................................39
S7.001.985......................................25 S7.010.901.04.................................30 S7.408..............................................29
S7.001.988......................................25 S7.010.901.5....................................48 S7.410.0......................................39, 59
S7.002.912......................................45 S7.010.902.001...............................48 S7.410.4...........................................70
S7.002.917.......................................46 S7.010.902.002...............................48 S7.410.7...........................................59
S7.002.981......................................45 S7.010.904.102...............................72 S7.412..............................................39
S7.003.903......................................24 S7.010.904.103...............................72 S7.414..............................................39
S7.003.906......................................44 S7.010.904.162...............................72 S7.416..............................................39
S7.003.907.......................................44 S7.010.904.163...............................72 S7.420.0...........................................40
S7.003.908......................................24 S7.010.904.183...............................72 S7.420.4...........................................70
S7.003.910.......................................25 S7.010.908.102...............................30 S7.421.0...........................................40
S7.003.912......................................45 S7.010.94.........................................56 S7.421.4...........................................70
S7.003.916.......................................46 S7.010.971.......................................60 S7.422..............................................40
S7.003.917.......................................46 S7.010.980.6.............................30, 56 S7.423..............................................40
S7.003.919.......................................47 S7.010.980.8........................24, 25, 26 S7.425..............................................40
S7.003.920......................................30 S7.010.981 ..........................24, 25, 26 S7.430.4...........................................70
S7.003.926......................................60 S7.010.982.................................24, 26 S7.431..............................................41
S7.003.943.......................................24 S7.010.9S0.702.....................35, 43, 55 S7.435..............................................41
S7.003.961......................................25 S7.010.9S0.703...............................43 S7.439..............................................41
S7.003.981......................................44 S7.010.9S0.704...............................23 S7.440..............................................40

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
82 Dimensions & Specifications are subject to change without prior notice

Index

Part Number Page Part Number Page Part Number Page

S7.444..............................................40 S7.820..............................................20 SA712-7.T05.....................................17
S7.448..............................................40 S7.824..............................................69 SA7RJ-081M41.................................35
S7.449..............................................40 S7.831..............................................20 SA7RJ-081M6A.................................35
S7.450..............................................41 S7.840.0...........................................21 SA7RJ-821M51.................................35
S7.452..............................................41 S7.840.1...........................................21 SJEM04M12PG9BM50......................11
S7.454..............................................41 S7.840.2...........................................21 SJEM04M12PG9FM50......................11
S7.456..............................................41 S7.840.4...........................................69 SJFFC04M12050D..............................9
S7.458..............................................42 S7.842..............................................21 SJFFC05M12100D............................10
S7.459..............................................42 S7.843..............................................21 SJFFCFMD04M12030D.......................9
S7.460..............................................42 S7.845..............................................22 SJFFCFMD04M12100D.......................9
S7.462..............................................42 S7.847..............................................21 SJFFCFMD05M12100D.....................10
S7.464..............................................42 S7.848..............................................22 SJFFD04M12050D..............................9
S7.466..............................................42 S7.850..............................................22 SJFFD04M12050D............................10
S7.468..............................................29 S7.852..............................................20 SJFFD05M12020D............................10
S7.476..............................................38 S7.R10.4...........................................33 SJFFDFMC04M12030D.......................9
S7.486..............................................38 S7.R20.4..........................................33 SJFFDFMC04M12100D.......................9
S7.490..............................................42 S7.R40.0..........................................33 SJFFDFMC05M12100D.....................10
S7.491..............................................42 S7.R41.0...........................................33 SJFFDFMC08M12100D.....................11
S7.492..............................................43 S7.R42.0..........................................34 SJFFDFMD03M8020D.........................8
S7.550..............................................51 S7.R43.1...........................................34 SJFFDFMD03M8050D.........................8
S7.554..............................................70 S7.R45.0..........................................34 SJFFDFMD04M12100D.......................9
S7.556..............................................51 S7.R47.4...........................................35 SJFFDFMD04M12100E.......................9
S7.560..............................................51 S7.R50.0..........................................34 SJFFDFMD05M12100D.....................10
S7.564..............................................71 S7.R52.4..........................................35 SJFMD04M12050D.............................9
S7.566..............................................51 SA712-7.000.....................................16 SJFMD05M12020D...........................10
S7.576..............................................52 SA712-7.001.908.............................26 SJFMD05M12100D...........................10
S7.580..............................................52 SA712-7.001.912..............................26 STAD1-7P2510...21, 34, 39, 40, 41, 54
S7.601.0...........................................52 SA712-7.010.900..............................16 STAD2-7P2510............................ 39, 40
S7.601.4...........................................71 SA712-7.010.901..............................17 STAD3-7P2510.............................41, 42
S7.605..............................................52 SA712-7.010.911..............................17 STAD4-7P2510.............................41, 42
S7.621.0...........................................53 SA712-7.010.9S0..............................16
S7.621.4...........................................71 SA712-7.K03.....................................17 Index
S7.623..............................................53 SA712-7.K10.....................................14
S7.626..............................................53 SA712-7.K20.....................................14
S7.630.4...........................................71 SA712-7.K30.....................................14
S7.635..............................................54 SA712-7.K31 .....................................14
S7.636..............................................54 SA712-7.K40.....................................15
S7.638..............................................54 SA712-7.K42.0..................................14
S7.639..............................................54 SA712-7.K42.1..................................14
S7.641..............................................52 SA712-7.K42.2..................................16
S7.645..............................................52 SA712-7.K44.0..................................15
S7.651..............................................53 SA712-7.K44.1..................................15
S7.653..............................................52 SA712-7.K44.2..................................16
S7.661..............................................53 SA712-7.K50.....................................15
S7.681..............................................51 SA712-7.K51.....................................15
S7.683..............................................51 SA712-7.L03.....................................17
S7.710..............................................63 SA712-7.S10.....................................14
S7.716..............................................63 SA712-7.S20.....................................14
S7.720..............................................64 SA712-7.S30.....................................14
S7.740.0...........................................64 SA712-7.S31 ....................................14
S7.742..............................................66 SA712-7.S40.....................................15
S7.743..............................................66 SA712-7.S42.0..................................14
S7.744..............................................65 SA712-7.S42.2..................................16
S7.749..............................................65 SA712-7.S44.0..................................15
S7.810..............................................20 SA712-7.S44.2..................................16
S7.811..............................................20 SA712-7.S50.....................................15
S7.814..............................................69 SA712-7.S51.....................................15
S7.816..............................................20 SA712-7.S05.....................................17

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 83
Dimensions & Specifications are subject to change without prior notice

CC0818 7374 S. Eagle Street Centennial, CO 80112 USA linkedin.com/company/sSeeaallccoonn CONC20.1
800-456-9012 / 303-699-1135 facebook.com/SealconLLC
[email protected] twitter.com/Sealcon
www.SealconUSA.com vimeo.com/sSeeaallccoonn