BendPak Ranger General Catalogue

2017-2018

PRODUCT CATALOG

The Benchmark of Quality



BendPak

Table of Contents

4-5 Medium-Duty Clearfloor Lifts Equipment models shown in this catalog may be available in different voltages upon request.
6-7 Medium-Heavy Floor Plate Lifts
8-9 Heavy-Duty Clearfloor Lifts
11-13 4-Post Light-Duty Lifts
14 4-Post Options / Accessories
16-17 4-Post Heavy-Duty Lifts
18 Alignment Lifts
19 Rolling Bridge Jacks
20-21 Quatra Scissors
23 Portable Column Lift
24-25 Low-Rise & Mid-Rise Lifts
26-27 Puzzle / Parking Lift
28-29 Puzzle Lift Installation Gallery
30-31 Parking & Storage
32 Image Gallery
34-35 Pipe Benders
36-37 Air Compressors
38 QuickJack
39 Power Units
40-41 Tire Changers
42 Brake Lathes
43 Wheel Balancers / Wheel Aligner
44-45 Floor Jacks / Transmission Jacks
46 Jacks Stands
47 Motorcycle Lifts
48 Carts & Dollies / Shop Presses
49 Work Benches / Hose Reel
50 Oil Drains / Oil Filter Crushers
51 Parts Washer
52 Wheel Balancer / Work Seat / Tire Changer / Portable Air Cooler
53 Engine Support / Engine Stand / Shop Crane
54-55 Manufacturing Superiority

GENERAL DISCLAIMER
BENDPAK warrants to the original purchaser only that all products shown in this catalog conform to BENDPAK published specifications and are free
from defects in material or workmanship. In no event will BENDPAK be liable to you or to anyone else for any decision made or action taken by you or
anyone else in reliance on information obtained from this catalog. BENDPAK has exclusive title and ownership rights, including all intellectual property
right, throughout the world in all material and content contained on these pages. Materials, design, specifications, images and other content within this
catalog are subject to change. BENDPAK does not take responsibility for improper use or any results thereof. BENDPAK products are provided and sold
as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. In no event will BENDPAK be liable
for any special, incidental, or consequential damages based on breach of warranty, breach of contract, negligence, strict tort, or any other legal theory.
Damages that BENDPAK will not be responsible for include, but are not limited to: loss of profits; loss of savings or revenue; loss of use of the product
or any associated equipment; cost of capital; cost of any substitute equipment, facilities, or services; downtime; the claims of third parties, including
customers; and injury to property. This limitation does not apply to damages caused by breach of the warranty of title and against infringements or to
claims for personal injury. Unless modified in a writing signed by both parties, it is understood that BENDPAK published warranties are to be the complete
and exclusive agreement between the parties. For complete and full warranty details contact BENDPAK at 1-805-933-9970 or visit www.bendpak.com

Tel: 1-805-933-9970 · Fax: 1-805-933-9160 · www.bendpak.com

XPR Series Features & Specifications

Medium-Duty Clearfloor

SERIES FEATURES: • Dual 3”- spaced safety locks • Telescoping screw pads
• Automatic arm restraints • Stackable adapters
• Wide or narrow configuration • Heavy-duty aircraft cable • Single piece columns
• Exclusive “Tru-Metric” arms • Oversized sheave diameter • Optional foot guards
• Single-point safety release • Padded safety-shutoff bar • Accommodates a wide variety
• Dual “Direct-Drive” cylinders • 4-piece truck and van adapters of vehicles assemblies
• Electric / hydraulic power • Triple-telescoping / low-pro arms • Safety locks in each column
• 17” x 19” A36 steel base plate
• UHMW polyethylene bearings

XPR-10S XPR-10S-LP XPR-10TS
Clearfloor Clearfloor Low-Pro™Arms Clearfloor 4 Triple Arms

Lifting Capacity - 10,000 lbs. Lifting Capacity - 10,000 lbs. Lifting Capacity - 10,000 lbs.
Max. Lift Height - 73” Max. Lift Height - 73” Max. Lift Height - 73”

Width - 132” or 145” / Height - 145” Width - 132” or 145” / Height - 145” Width - 132” or 145” / Height - 145”
XPR-10AS XPR-10AS-LP
Asymmetric
Asymmetric
Low-Pro ™Arms

Lifting Capacity - 10,000 lbs. Lifting Capacity - 10,000 lbs.
Max. Lift Height - 73” Max. Lift Height - 73”

Width - 137” or 145” / Height - 145” Width - 137” or 145” / Height - 145”
2-stage low-profile arms
Low-Pro™ Arms featured on LP lift models

XPR-10S-168
Clearfloor Extended Height

XPR-10S-168-LP
Clearfloor Extended Height / Low-Pro Arms

XPR-10TS-168
Clearfloor Extended Height / 4 Triple Arms

XPR-10AS-168
Asymmetric Extended Height

XPR-10AS-168-LP
Asymmetric Extended Height / Low-Pro Arms

Features bolt-on top extension
for added 24” clearance

4 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Polyurethane Tuf-Pads Steel Lift Pads Frame Cradle Pads Tall Stacking Adapters Air / Electric Work Station
XPR-10AXL
Shown with air / electric
work station and foot guards

FREE truck and van adapters come Padded overhead safety shutoff bar

standard with all BendPak 2-post lifts Oversized cable sheave diameter
reduces cable fatigue
NEWFeaturing: • Heavy-duty 1/2” aircraft
quality equalizer cables
TELESCOPING • Safety locks every 3”
SCREW PADS
UHMW polyethylene bearing system
Single point safety release
Dual hydraulic direct-drive cylinders

Adjustable Width
Can be installed in either wide or narrow configurations

Automatic arm restraints

Triple-telescoping arm design

Symmetric Vehicle Loading Asymmetric Vehicle Loading All 9k & 10k lifts come standard
with New telescoping screw pads

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 5

XPR Series Features & Specifications

Medium-Heavy Floor Plate

SERIES FEATURES: • Electric / hydraulic system • Adjustable wide or narrow
• Self-lubricating dura-glide UHMW drive-thru configurations
• Adjustable width design polyethylene bearing system • Durable powder coat finish
• Dual hydraulic lifting cylinders • Dual 3”- spaced safety locks • Open top design
• Single-piece columns • Automatic arm restraints • Large steel base plates
• Single point safety release • Truck and van adapters • Heavy-duty 3/8” equalizer cables
• Drop-end arms provide • Telescoping screw pads • Rugged steel construction
a lower pad height
• Triple-telescoping arms

XPR-9S XPR-9S-LP XPR-9TS
Shorty Floor Plate Shorty Floor Plate Shorty Floor Plate
Low-Pro ™Arms
4 Triple
Arms

Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs.
Max. Lift Height - 78” Max. Lift Height - 78” Max. Lift Height - 78”

Width - 132” or 145” / Height - 113” Width - 132” or 145” / Height - 113” Width - 132” or 145” / Height - 113”
XPR-9DS XPR-9DS-LP XPR-12FDL

Direct-Drive Floor Plate Direct-Drive Floor Plate Heavy-Duty Floor Plate
Low-Pro ™Arms

Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs. Frame cradle pads come standard
Max. Lift Height - 75” Max. Lift Height - 75” Lifting Capacity - 12,000 lbs.
Max. Lift Height - 74”
Width - 132” or 145” / Height - 145” Width - 132” or 145” / Height - 145” Width - 155” / Height - 144”
XPR-12FDL-LWB
Triple-telescoping arms
Heavy-Duty Floor Plate
Long-Wheelbase Arms

Frame cradle pads come standard
Lifting Capacity - 12,000 lbs.
Max. Lift Height - 74”
Width - 155” / Height - 144”

6 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Polyurethane Tuf-Pads Steel Lift Pads Frame Cradle Pads Tall Stacking Adapters Air / Electric Work Station

XPR-9DS • Heavy-duty dual 3/8” equalizer cables
Direct-Drive Floor Plate • Safety locks every 3”

Shown with air / electric Oversized cable sheave diameter
work station and foot guards reduces cable fatigue

NEWFeaturing:

TELESCOPING
SCREW PADS

Dual hydraulic direct-drive cylinders Single point safety release
UHMW polyethylene bearing system

Automatic arm restraints

Triple-telescoping arm design

Low profile floor plate

FREE truck and van adapters come All 9k & 10k lifts come standard
with New telescoping screw pads
standard with all BendPak 2-post lifts

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 7

XPR Series Features & Specifications

Heavy-Duty Clearfloor

SERIES FEATURES: • 8-piece truck and van adapters • Versatile drop in contact pads with
• Oversized column base plates convenient storage
• Dual-synchro equalization system • Padded safety-shutoff bar • Triple-telescoping arms / XPR-12 series
• Electric / hydraulic power system • Safety locks in each column • Extended height top-beam provides
• UHMW polyethylene bearings • Heavy-duty 1/2” equalizer cables greater overhead clearance
• Single-piece columns • Powder coat finish • Oversized cable sheave diameter
• Dual “Direct-Drive” cylinders • Rubber door bumpers • Rubber lift pads with stackable adapters
• Single point safety release
• Automatic arm restraints

XPR-12CL XPR-15CL XPR-18CL
Clearfloor Clearfloor Clearfloor

Frame cradle pads Frame cradle pads Frame cradle pads
come standard come standard come standard

Lifting Capacity - 12,000 lbs. Lifting Capacity - 15,000 lbs. Lifting Capacity - 18,000 lbs.
Max. Lift Height - 74” Max. Lift Height - 74” Max. Lift Height - 74”

Width - 155” / Height - 170” Width - 155” / Height - 170” Width - 155” / Height - 170”

XPR-12CL-LWB
Long-Wheelbase Arms

Frame cradle pads
come standard

Lifting Capacity - 12,000 lbs.
Max. Lift Height - 74”

Width - 155” / Height - 170”

16-Piece Adapter Set

Included on all truck two-post models

8 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Polyurethane Tuf-Pads Frame Cradle Pads Mobile High-Lift Jack Stand Steel Lift Pads Air / Electric Work Station

Padded overhead safety shutoff bar XPR-15CL
Shown with
optional equipment
Oversized cable sheave diameter
reduces cable fatigue

• Heavy-duty 1/2”aircraft-quality
equalizer cables
• Safety locks every 3”

XPR-12CL-192
XPR-12CL-LWB-192
XPR-15CL-192
XPR-18CL-192

Features bolt on
top extension for
added 24” clearance

UHMW polyethylene bearing system Automatic arm restraints
Durable rubber lift pads

Dual hydraulic direct-drive cylinders

Adapter storage

FREE truck and van adapters come standard Oversized A36 steel base plates

with all BendPak Heavy-Duty 2-post lifts Single point safety release

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 9

This is my BendPak

There are many,
But this one’s mine.

“Here at Kindig-it Design we specialize
in Bitchin’ Rides and that takes killer

equipment, thats why we use BendPak"
- Dave Kindig, Accomplished Designer
specialized in Hot Rod Customs Owner of
Kindig-it Design and star of TV’s “Bitchin' Rides”

www.kindigit.com

For more information on BendPak’s entire product line,
call 1-800-253-2363 or visit www.bendpak.com

© 2016 BendPak, Inc • BendPak, Inc is a registered trademark.

HD Series Features & Specifications

4-Post Light-Duty

SERIES FEATURES:

• Runways feature non-skid surface • Internal “anti-sway” slider blocks • Redundant slack-cable safety latches
• Single hydraulic cylinder under ramp in each column • Fully adjustable lock leveling stops
• Fully enclosed lifting cables, safety • Electric / hydraulic power system • Drive through ramps option available
locks and sheaves • Oversized sheave diameters • 36” approach ramps available
• Pneumatic push-button safety release • Rugged, self-lubricating cable sheaves • Durable powder coat finish
• Features 1-1/4” sheave axles • Multi-position safety locks in columns • Rugged steel construction
• Features heavy-duty 3/8” aircraft cable • Dual-position power unit locations • High-speed lifting

HD-7P
Narrow

Lifting Capacity - 7,000 lbs. HD-7P
Max. Rise - 82” / Runway Length - 164”
HD-7W
Width - 99.75” / Length - 189”
HD-7W
Wide

Lifting Capacity - 7,000 lbs.
Max. Rise - 82” / Runway Length - 164”

Width - 110.25” / Length - 189”

SPECIAL LIFT COLORS

Customize your BendPak lift with the color that best suits your garage or shop
interior design. Classic Blue comes standard but for a nominal fee you can choose
from optional Graphite Black or race-inspired Seca Red. Available on select models.

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 11

HD Series Features & Specifications

4-Post Light-Duty

SERIES FEATURES:

• Freestanding or bolt-down design • Internal “anti-sway” slider blocks • Multi-position safety locks in columns
• Runways feature non-skid surface in each column • Dual-position power unit locations
• Single hydraulic cylinder under ramp • Features heavy-duty 3/8” aircraft cable • Redundant slack-cable safety latches
• Fully enclosed lifting cables, safety • Longer ramps for low ground • Fully adjustable lock leveling stops
locks and sheaves clearance vehicles • Drive through ramps option available
• Pneumatic push-button safety release • Oversized sheave diameters • 36” approach ramps available
• Features 1-1/4” sheave axles • Rugged, self-lubricating cable sheaves • Perfect for parking, storage and service

HD-9 HD-9ST HD-9STX
Wide Standard Narrow Standard Narrow Tall Long

Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs.
Max. Rise - 70” / Runway Length - 164” Max. Rise - 70” / Runway Length - 164” Max. Rise - 82” / Runway Length - 188”

Width - 110.25” / Length - 200” Width - 99.75” / Length - 200” Width - 99.75” / Length - 224”
HD-9XW HD-9XL

Wide Tall Long Wide Standard Long

Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs.
Max. Rise - 82” / Runway Length - 188” Max. Rise - 70” / Runway Length - 188”

Width - 110.25” / Length - 224” Width - 110.25” / Length - 224”

12 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Jack Platform Caster Kit RBJ4500 Rolling Bridge Jack Aluminum Deck Drip Trays

HD-9SW HD-9SWX
Double Wide Standard Double Wide Tall Long

Lifting Capacity - 9,000 lbs. Lifting Capacity - 9,000 lbs.
Max. Rise - 70” / Runway Length - 164” Max. Rise - 82” / Runway Length - 188”

Width - 202” / Length - 200” Width - 202” / Length - 224”
HD-9 Series
• Push button pneumatic safety release
Oversize self-lubricating cable sheaves • Electric/hydraulic power system
• Optional power unit locations
Rugged 1-1/4” roller axles

Independent backup slack-cable safety latches Adjustable lock ladders
Optional rolling bridge jacks

Longer approach ramps • Heavy-duty 3/8”aircraft cables
See it on the BendPak / Ranger YouTube Page • Multi-position safety locks

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 13

4-Post Optional Accessories

Options/Accessories

ACCESSORIES:

Jack Platform Caster Kit RJ-45 Rolling Bridge Jack Aluminum Deck Drip Trays

Caster Kit RBJ4500 (Bottle jacks not included)
Fits HD-7 & HD-9 Series Rolling Bridge Jack
JP-3
3,000 lb. Capacity Jack Platform

(Bottle jacks not included) WSA-100 Solid Aluminum Decks
Air Electric Work Station
JP-6
6,000 lb. Capacity Jack Platform

Aluminum Approach Ramps Extended Steel Approach Ramps Extended Alum. Approach Ramps
Width - 19.75” / Length - 36.75” Width - 19.75” / Length - 48” Width - 19.75” / Length - 48”

14 For full product details and specifications, please visit www.bendpak.com



HDS Series Features & Specifications

4-Post Heavy-Duty

SERIES FEATURES:

• Adjustable runway widths • Internal “anti-sway” slider blocks • Multi-position safety locks in columns
• Single hydraulic cylinder under ramp in each column • Dual-position power unit locations
• Fully enclosed lifting cables, safety • Longer ramps for low ground • Redundant slack-cable safety latches
locks and sheaves clearance vehicles • Fully adjustable lock leveling stops
• Pneumatic push-button safety release • Oversized sheave diameters • Drive through ramps option available
• Features heavy-duty aircraft cable • Rugged, self-lubricating cable sheaves • 48” approach ramps available
• Runways feature non-skid surface • Features heavy-duty sheave axles • Customizable power unit location

HDS-14 HDS-14X HD-14T
Standard Extended Length Super Tall

Lifting Capacity - 14,000 lbs. Lifting Capacity - 14,000 lbs. Lifting Capacity - 14,000 lbs.
Max. Rise - 70” / Runway Length - 199” Max. Rise - 70” / Runway Length - 229” Max. Rise - 82” / Runway Length - 191”

Width - 130” / Length - 241” Width - 130” / Length - 271” Width - 126” / Length - 234”
HDSO-14P HDS-27 HDS-27X
Open Front
Plain Deck

Lifting Capacity - 14,000 lbs. Lifting Capacity - 27,000 lbs. Lifting Capacity - 27,000 lbs.
Max. Rise - 70” / Runway Length - 199” Max. Rise - 60” / Runway Length - 263” Max. Rise - 60” / Runway Length - 323”

Width - 143” / Length - 244” Width - 154” / Length - 297” Width - 154” / Length - 357”
HDS-35X HDS-35

Lifting Capacity - 35,000 lbs.
Max. Rise - 60” / Runway Length - 263”

Width - 154” / Length - 297”

16 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Rolling Bridge Jack DP-30 Rolling Oil Drain Air / Electric Work Station Rolling Bridge Airline Kit
HDS-35X HDS-40 HDS-40X

Lifting Capacity - 35,000 lbs. Lifting Capacity - 40,000 lbs. Lifting Capacity - 40,000 lbs.
Max. Rise - 60” / Runway Length - 323” Max. Rise - 60” / Runway Length - 263” Max. Rise - 60” / Runway Length - 323”

Width - 154” / Length - 357” Width - 154” / Length - 297” Width - 154” / Length - 357”
HDS-18E Shown with rolling bridge jacks Greasable sheave pins
• Adjustable height locking positions
Integrated flow restrictor • Stainless steel lifting cables
• Spring-loaded safety locks

Large diameter cable sheaves
Redundant slack cable safety lock

Maintenance-free electric hydraulic power system
and conveniently push button safety lock release

Non-skid runways Optional bridge jack Wide ramp surface

HDS-18E 17
Lifting Capacity - 18,000 lbs.
Max. Rise - 60” / Runway Length - 263”
Width - 154” / Length - 297”

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970

HDS Series Features & Specifications

Alignment Lifts

SERIES FEATURES:

• Runways adjust to different widths • Self-lubricating cable sheaves Equipped with rear slip plates and
• Multi auto-level locking positions • Oversized sheave diameter galvanized front turn plates
• Single hydraulic cylinder • Features heavy-duty sheave axles HDS-14LSX
• Fully enclosed lifting cables and sheaves • Fully adjustable lock stops Extended Length
• Pneumatic push-button safety release • Drive through ramps available
• Heavy-duty aircraft cable • Rolling bridge airline kit available
• Runways feature non-skid surface • Roll back kit available

HD-9AE HDSO-14AX
Standard Open Front

Max. 2 Wheel Align. - 160” / Max. Rise - 70” Max. 2 Wheel Align. - 182” / Max. Rise - 70” Max. 2 Wheel Align. - 182” / Max. Rise - 70”
Capacity - 9,000 lbs. / Runway Length - 188” Capacity - 14,000 lbs. / Runway Length - 199” Capacity - 14,000 lbs. / Runway Length - 199”

Width - 127” / Length - 224” Width - 143” / Length - 243” Width - 130” / Length - 241”
HDS-14LSXE

Limo Extended
Length

Max. 2 Wheel Align. - 212” / Max. Rise - 70” Courtesy of Jay Leno’s Big Dog Garage
Capacity - 14,000 lbs. / Runway Length - 229”
NEED PARTS? WE HAVE THEM TOO.
Width - 130” / Length - 271” CALL 1-805-933-9970
HDS-18EA

Truck Alignment

Max. 2 Wheel Align. - 211” / Max. Rise - 60”
Capacity - 18,000 lbs. / Runway Length - 263”

Width - 154” / Length - 297”

18 For full product details and specifications, please visit www.bendpak.com

Optional 4-Post Accessories

Rolling Bridge Jacks

SERIES FEATURES: • Rubber lifting pads or steel lifting
pads come standard or optional
• 4,500 - 25,000 lbs. lifting capacity • Optional air-line kit
• Versatile drop in lifting pads • Raise 2 or 4 wheels off the runways
• Multi-piece adapter set standard • Telescoping roller design allows the
• High-pressure hydraulic power unit runways to be adjusted for different
• Stackable adapters tread widths
• Automatic safety locks
• Three safety-lock positions

RBJ4500 RBJ6000 RBJ7000
Rolling Jack Rolling Jack Rolling Jack

Lifting Capacity - 4,500 lbs. Lifting Capacity - 6,000 lbs. Lifting Capacity - 7,000 lbs.
Lift Pad Reach - 40”- 63” Lift Pad Reach - 40”- 63” Lift Pad Reach - 42”- 59”
Frame Reach - 35”- 45.5” Frame Reach - 35”- 45.5” Frame Reach - 35”- 45.5”

RBJ9000 RJ-15 RJ-18
Rolling Jack Rolling Jack Rolling Jack

Lifting Capacity - 9,000 lbs. Lifting Capacity - 15,000 lbs. Lifting Capacity - 18,000 lbs.
Lift Pad Reach - 40”- 63” Lift Pad Reach - 45 ”- 58” Lift Pad Reach - 43”- 64”
Frame Reach - 45”- 51.5” Frame Reach - 44”- 58” Frame Reach - 45”
RBJ4500
RJ-25
Rolling Jack

Lifting Capacity - 25,000 lbs. 19
Lift Pad Reach - 43”- 64”
Frame Reach - 45”
To see more images, follow us on Instagram @bendpak

XR Series Features & Specifications

Quatra Scissors

SERIES FEATURES: • Power console with simple controls • Easy to use and understand
• Open center design • High efficiency hydraulic power unit
• 12,000 lbs. lifting capacity • Quad automatic safety locks with • Equipped with rear slip plates and
• Extended runway design pneumatic push-button release galvanized front turn plates
• Durable powder coat finish • Lubricated bearing on all pivot points • Straight up vertical lifting
• Multi-position runway work steps • Rugged steel legs • Multi-position automatic leveling system
• Non-skid runways for sure grip • Can be flush mounted or recessed • Easy access to components for servicing
• Electric / hydraulic power system
• Integrated velocity fuses for cylinders

XR-12000A Full floating recessed slip plates
Alignment Lift

Multi-position automatic leveling system Multi-position runway work steps

Extendable, hinged, collapsible
and stowable approach ramps

Easy access to electrical / hydraulic
components with easy to use and
understand operator controls

Rugged steel legs and formed steel runways

See it on the BendPak / Ranger YouTube Page

MODEL XR-12000A XR-12000 Grease fittings on all
Lifting Capacity Alignment Standard moving pins and bearings
12,000 lbs. 12,0000 lbs.
Cylinders feature integrated velocity
Overall Width 88” 88” fuses to control sudden descent
Overall Length 281.25” 257.75”
Runway Width
Length of Runways 24” 24”
219.5” 193”

Max. 2-Wheel Align. 194” N/A”
Max. Lifting Height 75” 75”

20 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

DP-30 Rolling Oil Drain 3D Aligner (pg. 43) Rolling Bridge Airline Kit
Full floating recessed galvanized turn plates

Non-skid runways for sure grip

Collapsible front tire stops clear for low
vehicle skirts and alignment instrumentation

Optional RBJ6000 - 6,000 lb. capacity rolling bridge jack

Lubricated-for-life bearings on all pivot points

XR-12000
Standard Deck

Open center design 21
Durable powder coat finish will provide years of protection

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970



Mobile Lift Features & Specifications

Portable Column Lift

SERIES FEATURES:

• 18,000-lb. individual column capacity • Variable height limit settings • Enclosed electric-hydraulic power system
• 108,000-lb. maximum system capacity • Two-speed lowering option settings • Pallet-jack style steering wheels
• SINGLE, PAIR or TEAM operation • Equipped with a warning light and • Extended forks accommodate wide
• Three 30’ cables are used leaving the audible alarm for critical warning alerts tires and deep wheel configurations
front or back of the lift clear of cables • Emergency shut off’s on each column • Multi-width wheel forks with locking pins
• Self-diagnostics and self-calibration • Key lock enclosure on each column • Tandem 8” diameter polyurethane
• Control systems feature 24-volt circuitry • Electronics are multi-fuse protected covered steel wheels

*PCL-18B

Warning light and
audible alarm

Column Capacity - 18,000 lbs. 30 ft. cables Emergency shutoff
System Capacity - 108,000 lbs. on each column

Lifting Height - 71.5” • SINGLE, PAIR or TEAM operation
MLS-18 • Rabbit or Turtle lowering speeds
Mobile • Multi-fuse protected
Multiple, automatic, independent safety
High-Lift locks spaced every 4 inches
Jack Stand

Holding Capacity - 18,000 lbs.
Height - 48.75”- 74.5”
Base Dimensions - 32”

Multi-width wheel forks
with locking pins

Durable powder-coat finish

Pallet-jack style steering wheels Easily roll over dirt and debris

*Can be configured in sets of 4 or 6

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 23

Scissors Series Features & Specifications

Low-Rise & Mid-Rise

STANDARD FEATURES:

MD-6XP Model SP-7X & All Low-Rise Models Portable Models
Multi Piece Adapter Set 1.5 inch Rubber Lift Blocks Mobile Power Cart
MD-6XP
LR-5T Mid-Rise Portable MDS-6LP
Low-Rise Mid-Rise Scissor

Comes standard Comes standard Comes standard
with 8 pc. adapter set with adapter set with rubber lift blocks
Lift Pad Dimensions - 24”x 53” Adjustable Arms Lift Pad Dimensions - 19” x 66”
Capacity - 10,000 lbs. Capacity - 6,000 lbs. Capacity - 6,000 lbs.
Height Range - 4”- 22.75” Height Range - 4.75”- 48” Height Range - 4”- 43”
MD-6XP
MDS-6LPF
Perfect for light-duty trucks and cars Mid-Rise Scissor

Flush Mount

Durable powder coat finish Safety lock bar with multiple lock positions

Portable motor cart Comes standard
serves as tow handle with rubber lift blocks
Lift Pad Dimensions - 19” x 66”
Adjustable arm assemblies Capacity - 6,000 lbs.
Height Range - 4”- 43”
Solid steel torsion bar
Twin hydraulic cylinders MDS-6EXT
Mid-Rise Scissor
Multi piece adapter set
Extended
24 For full product details and specifications, please visit www.bendpak.com
Comes standard
with rubber lift blocks
Lift Pad Dimensions - 19” x 79”
Capacity - 6,000 lbs.
Height Range - 4”- 37”

ACCESSORIES:

1.5” Rubber Lift Blocks 3” Rubber Lift Blocks 6” Rubber Lift Blocks LR-4A Arm Kit
P-6B
LR-60 LR-60P
Low-Rise Low-Rise Portable Open Center Pit Lift

Comes standard Comes standard Comes standard
with rubber lift blocks with rubber lift blocks with rubber lift blocks
Lift Pad Dimensions - 18” x 53” Lift Pad Dimensions - 18” x 53” Lift Pad Dimensions - 18” x 53”
Capacity - 6,000 lbs. Capacity - 6,000 lbs. Capacity - 6,000 lbs.
Height Range - 4”- 26” Height Range - 4”- 26” Height Range - 4”- 26”

P-6FB SP-7X SP-7XF Full-Rise
Open Center Pit Lift Full-Rise Flush Mount

Flush Mount

Comes standard Comes standard Comes standard
with rubber lift blocks with rubber lift blocks with rubber lift blocks
Lift Pad Dimensions - 18” x 53” Lift Pad Dimensions - 21.5” x 63”- 70” Lift Pad Dimensions - 21.5” x 63”- 70”
Capacity - 6,000 lbs. Capacity - 7,000 lbs. Capacity - 7,000 lbs.
Height Range - 4”- 26” Height Range - 5”- 68” Height Range - 5”- 68”

P-9000 P-9000F Optional P-9000
Low-Rise Pit Lift Low-Rise Pit Lift Arm Kit

Flush Mount

Comes standard Comes standard Capacity / Each arm - 1,125 lbs.
with rubber lift blocks with rubber lift blocks (4) Contact pads • (4) Sliding receivers
Lift Pad Dimensions - 23” x 53” Lift Pad Dimensions - 23” x 53”
Capacity - 9,000 lbs. Capacity - 9,000 lbs. (4) 3” Stackable adapters
Height Range - 3.5”- 21” Height Range - 3.5”- 21”

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 25

Puzzle Lift Series Features & Specifications

Puzzle Lift

SERIES FEATURES: • Heavy-duty steel construction
• Reliable electric-hydraulic power system
• 6,000 lbs. capacity per deck • Full-width platform to keep bottom vehicles protected
• Perfect for cars, light trucks and ATVs • Features heavy-duty 3/8” aircraft cable
• Rugged I-beam and C-channel construction • Rugged 1-1/4” roller axles
• Wide base-plate for maximum stability • Extended Columns for wide-clearance vehicles (PL-6KDTX)
• Superstructure features durable powder-coat finish
• Dual hydraulic cylinders with heavy-duty steel lifting cable

PL-6KDT / PL-6KDTX
Tandem Lift

PL-6KT
Triple Deck Puzzle Lift

26 For full product details and specifications, please visit www.bendpak.com

• Simple controls See it on the BendPak / Ranger YouTube Page
• High-speed lifting
• Oversized sheave diameter reduces cable fatigue
• Multi-position safety locks in each column
• Runways feature non-skid surface
• Independent backup slack-cable safety latches

MODEL PL-6KDT PL-6KDTX PL-6KT
Double Double Extended Triple
Lifting Capacity / Deck 6,000 lbs. 6,000 lbs.
Overall Width 6,000 lbs.
Overall Length 211” 308”
Platform Width 236.5” 250” 236.5”
Length of Platforms 236.5”
Drive Clearance 82” 82”
Max. Rise 152” 82” 152”
152”
93” 93”
89” 93” 89”
89”

PL-6KT
Triple Deck
Puzzle Lift

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 27

Puzzle Lift Installation

Dana Point, CA

28 For full product details and specifications, please visit www.bendpak.com

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 29

Parking Series Features & Specifications

Parking & Storage

SERIES FEATURES: Heavy-Duty See it on the BendPak / Ranger YouTube Page
• Wide base-plate for maximum stability
Light-Duty • Vehicle decks accomodate most
• Perfect for cars & light trucks passenger cars and light-duty trucks.
• Dual hydraulic cylinders • Heavy-duty steel construction
• Dependable hydraulic design • Built-in wheel stops
• Easy operation & simple controls • Two-position fail-safe locking system
• Electric / hydraulic power system
• Automatic safety locks

PLT-6S PL-7000XR PL-18000

Capacity - 6,000 lbs. Capacity - 7,000 lbs. Capacity - 6,000 lbs. Per Deck
Rise - 62.9” / Deck Length - 135” Rise - 85” / Deck Length - 157.5” Overall Height - 364” / Deck Length - 155”
Width - 98.3” / Length - 153.5”
Width - 98” / Length - 173.5” Width - 114” / Length - 189”
PL-14000 PL-14000XL

Capacity - 7,000 lbs. Per Deck Capacity - 7,000 lbs. Per Deck
Overall Height - 280” / Deck Length - 137” Overall Height - 280” / Deck Length - 157”

Width - 119” / Length - 194” Width - 119” / Length - 214”
PL-14000-20 PL-14000-18

Capacity - 7,000 lbs. Per Deck Capacity - 7,000 lbs. Per Deck PL-18000
Overall Height - 234” / Deck Length - 137” Overall Height - 210” / Deck Length - 137”

Width - 119” / Length - 194” Width - 119” / Length - 194”

30 For full product details and specifications, please visit www.bendpak.com

GALLERY:

PL-7000XR • Overhead power unit provides
Minimum footprint allows multiple smooth quiet hydraulic operation
installations in limited space • Power unit and controls integrated Maintenance-free composite carriage
within the lift structure bearings and self-lubricating chain rollers
• Automatic safety lock

Heavy-duty lifting chains
Wide deck platform accommodates
pickups, vans, and cars

User-friendly controls
Wide-base plate mounts directly on ground or asphalt

Designed for installation on typical parking surfaces 31

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970

32 For full product details and specifications, please visit www.bendpak.com



Bender Series Features & Specifications

Pipe Benders

SERIES FEATURES: • ANSI 92.2 Cylinders • Direct drive high speed 4 GPM pump
• Quick release bending dies • Tool trays
• 3-1/3” Min. bending radius • Bending heads to within .002” • Large fluid reservoir
• 5” Max. bending radius • Bending and end finishing operation • Filtered hydraulic system
• Canister style hydraulic filter • Adjustable back gate pressure • Oil sight gauges
• 5 Hp / 208 - 230 VAC motor • 180º bending capacity • 1/2” high pressure hose
• Manual or automatic controls • One piece solid steel barrel • Wide variety of tooling available
• Drop-in swaging collars
• Twist lock tooling

BB-1 1302BA-202 BB-1 / 202
1302BA-302 DIE PACKAGE

Bending Controls - Manual Bending Controls - Digital Automatic BB-1 / 202 Economy Die Package
Clampless Swager - Internal Expander Clampless Swager - Internal Expander Bending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 2”- 2-1/4”- 2-1/2”
BB-1 Die Package Available 202 or 302 Die Package Available
BB-2 1302BAS-202 BB-2 / 302
1302BAS-302 DIE PACKAGE

Bending Controls - Manual Bending Controls - Semi-Automatic BB-2 / 302 Economy Die Package
Clampless Swager - Internal Expander Clampless Swager - Internal Expander Bending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 1-7/8”- 2”- 2-1/4”- 2-1/2”
BB-2 Die Package Available 202 or 302 Die Package Available

34 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Specialty Tooling 300-1 Die Package 300-2 Die Package Card System CD Rotation Dial
Available Upon Request

BAS Semi-Automatic Controls

BB Series / 1302 Series
Top View

See it on the BendPak / Ranger YouTube Page BA Digital Automatic Controls
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
35

Elite Series Features & Specifications

Air Compressors

SERIES FEATURES: • Forged ductile iron crankshaft • Oil sight gauge
• Corrosion resistant tubing for coolers, • Automatic pressure switch
• 80 & 120 Gallon vertical tank seperators and valves. • ASME rated overload pressure
• 4-Cylinder / 2-stage pump • 100% cast iron Elite pump safety valve
• ASME rated tank • Cast iron cylinders and heads • Pressure gauge with valve
• Electric mag-starter with deep cooling fins • Oversized replaceable air filters
• Fan-type flywheel • Forced-air after cooler • Automatic start / stop
• Fully enclosed belt guard
• Tapered roller bearings 7.5 HP MODEL 10 HP MODEL

5 HP MODEL

TS-580V-601 / 208-230 V / 60 Hz / 1 Ph VMX-7580V-601 / 208-230 V / 60 Hz / 1 Ph VMX-10120V-603 / 208-230 V / 60 Hz / 3 Ph
Horsepower - 5 Hp Horsepower - 7.5 Hp Horsepower - 10 Hp

Maximum CFM - 17.2. / 175 psi Maximum CFM - 26.5 / 175 psi Maximum CFM - 35 / 175 psi
Tank - 300L / 80 Gal / Vertical Tank - 300L / 80 Gal / Vertical Tank - 454L / 120 Gal / Vertical

(3 Ph Model Available) BY

ANSI Extreme-duty four-cylinder cast iron pump The 100% cast iron V-Max Elite pump
features splash lubrication for total
Electric motor with cooling fan reliability and a V-4 finned cylinder
configuration that provides 360°
Protective pulley cover cooling. Heavy-duty, disc-type valves
are dependable and accessible without
Air cooling assembly having to remove the cylinder head or
perform other complicated valve main-
tenance procedures. The large
V-Max pump puts out a lot of air with
little noise due to a slower RPM speed
and two-stage design. A built-in
intercooler and air-cooled aftercooler
chill the air, resulting in reduced heat
and less moisture from condensation.

36 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Moisture Minder® Moisture Minder® Kit Anti-Vibration Pads

RS7580H-603 ANSI
Rotary-Screw
Air Compressor

Power Requirements:
208-230 V AC / 60 Hz / 3 Ph

Horsepower - 7.5 Hp
Maximum CFM - 21.3 / 150 psi

STANDARD FEATURES:

• Variable speed drive controls with
timed shutdown

• Hush-Quiet super silenced
insulated enclosure

• Fully open access doors for easy service

• Auto-dual control energy saver

• Spin-on oil filter

• Heavy-duty inlet filter

• Twin toothed drive belts provide greater
durability and more efficient power
transmission

• Precision-aligned, high-quality roller
bearings designed to withstand the most
demanding conditions and extend
service life

• Asymmetric rotary screw with oil injection

• Compact design

• Phase protection safety feature

• Dual filtration

• Spin-on oil separator

• Air cooled after cooler

• Metal cabinet features soundproof panels Value over a period of 5 years
with washable high density foam

• Efficiency and reliability are designed into Reduced Long-Term Operating Costs
the asymmetric profile screw set with Energy costs are a significant portion of any compressed air system’s total lifetime cost. In fact,
excellent inlet flow characteristics
the amount of energy required to run a compressor for just one year can exceed the compressor
purchase price. Over a period of 10 years, energy normally totals 70% of the overall costs.

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 37

IT’S TIME TO
MEET THE BOSS

• Extreme low-cost operation See pg. 52
• Remote-controlled swing-louvers
• Incredible cooling in low humidity

1-855-2BE-COOL • www.thecoolboss.com

Free shipping to most areas in the 48 contiguous states.
© 2017 Cool Boss • BendPak Inc. and Cool Boss are registered marks.

AC Power / 110 - 230 Volts / Vertical Mount

Power Units

Ranger™ AC hydraulic power units are self-contained, dependable sources of hydraulic power that come standard with an
abundance of features and benefits in a durable and economic package. These high-quality power units are ideal for industrial
AC applications such as auto lifts, elevated work platforms, scissor lifts, dock levelers, conveyors, packaging machines, machine
tools, compactors, crimping machines, presses, robotic equipment, tailgate lifts, dump bodies, cab tilts, emergency backup units,
snowplows, log-splitters, harvesting machinery, lift platforms, scaffolds, presses, waste compactors, car lifts, medical field and
dental field lifts and more.

E0.8B8F1 E1.2B3F1 FEATURES:
Power Unit Power Unit
• UL / ETL Listed (except model E1.2B8F1)
Gal Reservoir - 1.5 / PRV - 1900 Gal Reservoir - 1.5 / PRV - 2500 • Vertical Design
Motor - 1.5 HP / 110-230V-50/60-1PH Motor - 1.5 HP / 110-230V-50/60-1PH • Built-in throttle and buffer valves reduce
pre-load pressure
UL/ETL Listed CE Listed • Integrated fixed-setting pressure relief valve
E2.1F3H1 F2.1F3H1 • Submerged pump
• Spare pressure port
Power Unit Power Unit • Multi-hole adapter plate adapts to a wide
variety of mounting applications
• Suction-strainer
• Breather and fill-cap
• Hardened-allow pump end plates for
unmatched durability in demanding
environments and heavy-duty applications

Gal Reservoir - 3.6 / PRV - 2650 Gal Reservoir - 3.6 / PRV - 2850
Motor - 2.5 HP / 110-230V-50/60-1PH Motor - 2.5 HP / 208-230V-50/60-1PH

UL/ETL Listed UL/ETL Listed
F3.2G3H1 E3.7K3H2

Power Unit Power Unit

Gal Reservoir - 4.2 / PRV - 2650 Gal Reservoir - 8.6 / PRV - 2400
Motor - 2.5 HP / 208-230V-50/60-1PH Motor - 2.5 HP / 208-230V-50/60-1PH

UL/ETL Listed UL/ETL Listed

For full product details and specifications, please visit www.quickjack.com 39

Tire Changers Features & Specifications

Tire Changers

Ranger’s NextGen™ Tire Changers - Tire Shop Tested™ TM SERIES

All NextGen models are loaded with design enhancements that make the technician’s job easier. Sturdy frames, rigid 45 mm hexagonal
vertical shafts and hardened-steel horizontal outrigger support arms eliminate flex during all tire service procedures, reducing the
chance of damage to expensive wheels. Bead seating and tire inflation is simple and effortless with Ranger’s exclusive TurboBlast™
portable bead seating system. High-torque electric turntables, increased speed and reversible direction means quicker tire removal
and installation. Industrial-grade pneumatic control valves feature die cast and machined bodies constructed from zinc and aluminum
for increased service life and performance at the highest level possible within almost every imaginable working condition. Important
wheel service accessories come standard, like a large soap bucket with brush and multi-piece plastic wheel protector kit that
includes turntable jaw covers, bead-breaker blade boots and specialized mount / demount head covers to help protect delicate wheels.

R745 R76LT R980AT/ATF
Swing-Arm Tilt-Back Swing-Arm
Tire Changer Tire Changer Power Assist

Internal Clamping - 12”- 21” Internal Clamping - 10”- 30” Internal Clamping - 10”- 30”
External Clamping - 10”- 18” External Clamping - 9”- 28” External Clamping - 9”- 28”
Maximum Tire Diameter - 36” Maximum Tire Diameter - 43” Maximum Tire Diameter - 50”

R980XR/XRF R980NXT/NXTF R76ATR/ATRF
Swing-Arm Swing-Arm Tilt-Back
Tire Changer Power
Assist Power Assist

Internal Clamping - 10”- 30” Internal Clamping - 10”- 30” Internal Clamping - 10”- 30”
External Clamping - 9”- 28” External Clamping - 9”- 28” External Clamping - 9”- 28”
Maximum Tire Diameter - 50” Maximum Tire Diameter - 50” Maximum Tire Diameter - 43”

R30XLT/XLTF R80DTXF R26FLT
Swing-Arm Leverless Truck Tire Changer
Tire Changer
Power Assist

Internal Clamping - 13”- 33” Internal Clamping - 12”- 31” Drive System - Electric / Hydraulic
External Clamping - 10”- 28” External Clamping - 10”- 29” Maximum Rim Diameter - 14”- 26”
Maximum Tire Diameter - 50” Maximum Tire Diameter - 47”
Maximum Tire Diameter - 63”

40 For full product details and specifications, please visit www.bendpak.com

ACCESSORIES:

Plastic Duckhead ATV / Motorcycle Rim Guard Clamps Reduction / RWL-150T Wheel Lift
R80DTXF Duckhead Extension Clamps Fits R980XR/NXT & R30XLT
Leverless
Tire Changer Multi-profile traveling Tilt-back tower design
drop-center tool

Automatic leverless bead lifting tool

Up-front ergonomic controls

Dual power drop rollers help
keep beads in position through
the entire mounting procedure

Wheel positioning Dual lower bead lifting discs
and restraint device

TurboBlast™ bead seating system

Fully adjustable wheel clamps

Bi-lateral bead loosener
with hand control operation

Convenient foot operated controls Tire iron slot

TM SERIES See it on the BendPak / Ranger YouTube Page

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 41

Wheel Service Features & Specifications

Wheel Service

RL-8500XLT FEATURES: Truck Adapter Set Optional Truck Adapter Kit

• Extended capacity spindle These precision hardened steel Our super-duty truck tooling package
• Massive tapered spindle bearings adapters increase lathe performance for Ranger brake lathes consists of
• Serpentine belts provide a faster, and brake component mounting an upgraded 1-7/8” arbor and a wide
quieter operation, reducing chatter capacity. Fits most 1” arbor lathes and variety of adapters. This enormous set
and vibration helps deliver a superior micro-finish allows you to expand the coverage to
• Works on all cars or trucks, both foreign on drums and rotors, composite and handle virtually any vehicle through
and domestic standard cast applications and most 1-ton trucks. Fits Ranger brake lathes
flywheels. with 1” arbor
RL-8500XLT
Truck Light & Medium Brake Lathe
Truck Adapter Set Truck Adapter Kit

Max. Rotor Thickness - 2.5” A) Small Truck Cone - 4.125” x 5.25” Fully Equipped Multi-Piece Set
Max. Rotor Diameter - 17” B) Large Truck Cone - 5.125” x 6.25” Accommodates Medium &
Max. Drum Diameter - 28” Full Size Trucks
RL-8500 C) Truck Plate - 7.40” OD
Combination Brake Lathe Package Infinitely variable spindle
and cross feed settings
Durable dual work lamps
Tool tray for your convenience
Safety shield comes standard One cut micro-finish with our
Maximum rotor thickness - 2.5” micro dial twin tool cutters
Maximum rotor diameter - 17”
Rugged cast iron body
Standard arbor provides a
multitude of tooling choices

Chip funnel and chip catcher

Fully equipped tool package comes standard Work bench with large tool storage boards
See it on the BendPak / Ranger YouTube Page

42 For full product details and specifications, please visit www.bendpak.com

DST-2420 FEATURES: DST-30P FEATURES: DST-64T FEATURES:

• Dynamic, Static, and Performance • Ergonomic control board and • Precision DataWand™ and inner data arm
Alloy settings easy-to-read LED display • Low RPM balancing speed and
• Automatic round-off with top-dead- • Multi-user save function rapid six-second cycle time
center weight position indicator • Automatic braking • Automatic braking
• Hardened-steel 36-mm shaft • Low RPM balancing speed and rapid • LED inner wheel target light
• Quick-release hub nut six-second cycle time • Manual or automatic start
• Multi-user save function • Self-calibration function • Self calibration function

DST-2420 DST-30P DST-64T
Wheel Balancer Wheel Balancer Wheel Balancer with

DataWand™ Entry

Max. Wheel Diameter - 10”- 30” Max. Wheel Diameter - 8” - 30” Max. Wheel Diameter - 10”- 30”
Max. Tire Diameter - 47” Max. Tire Diameter - 50” Max. Tire Diameter - 50”
Max. Tire Weight - 145 lbs. Max. Tire Weight - 150 lbs. Max. Tire Weight - 150 lbs.
High-resolution drive-on RB24T
3DP4100 approach camera Truck Wheel Balancer
Target 3D Pro™
3D Imaging
Wheel Aligner
Power Requirements: 115V / 1Ph, 50/60 Hz /

8 amp-230V / 1Ph, 50/60 Hz / 8 amp

32” Upper flat LCD monitor (2) Cameras with LED lights Max. Wheel Diameter - 30”
13”- 25” wheel clamps Alignment functions & measurments Max. Tire Diameter - 50”
are controlled via mouse & keyboard Max. Tire Weight - 400 lbs.

Steel Wheel Weights
(Silver or Black)

(4) Alignment targets Dell® OptiPlex® PC with powerful
Intel® Core2 Duo 1.60 GHz processor

18” Lower flat LCD monitor

Includes: 7g (.25oz) ea.
• Steering wheel lock 700 Pcs. Per Roll
• Brake pedal depressor Strong Adhesive Backing

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 43

Lifting Features & Specifications

Jacks & Lifting

INFORMATION:

Ranger’s wide array of multi-purpose floor jacks just keeps getting larger and more diverse. Our floor jacks have
maximum capacities ranging from 3,000 to 60,000 lbs. and come in a variety of styles, like quick-pump and low-profile. No matter
which one you choose, Ranger floor jacks offer incredible lifting power and top-notch construction that you can count on to never
let you down. Our impressive line of floor jacks is carefully designed to accommodate a wide spectrum of weight capacities and
lifting applications, easily lifting just about anything that needs service.

RFJ-3000AL RFJ-3000LPF RFJ-4000AL

Capacity - 3,000 lbs. Capacity - 3,000 lbs. Capacity - 4,000 lbs.
Height - 3.5”- 17.5” Height - 2.75”- 24” Height - 3.5”- 17.75”
Chassis Length - 24” Chassis Length - 34” Chassis Length - 24”

RFJ-2TX RFJ-5000HD

Capacity - 4,000 lbs. Capacity - 5,000 lbs. RFJ-3000LPF
Height - 3.5”- 31.5” Height - 3”- 20” RFJ-6HD
Chassis Length - 37”
Chassis Length - 26”
RFJ-3TP RFJ-3TQP

Capacity - 6,000 lbs. Capacity - 6,000 lbs. Capacity - 6,000 lbs.
Height - 5.25”- 19.25” Height - 5”- 19.75” Height - 3.625”- 21”
Chassis Length - 26” Chassis Length - 25.5” Chassis Length - 27”

44 For full product details and specifications, please visit www.bendpak.com

GALLERY: RFJ-10TL RBJ-30TL

RFJ-3T

Capacity - 6,000 lbs. Capacity - 20,000 lbs. Capacity 1st Stage - 60,000 lbs.
Height - 4.75”- 20.5” Height - 7”- 23” Capacity 2nd Stage - 30,000 lbs.
Chassis Length - 28” Height - 6.5”- 12” / Chassis Length - 22.5”
Chassis Length - 61”
RTJ-1100 RTJ-1 RTJ-3000

Capacity - 1,100 lbs. Capacity 1st Stage - 2,000 lbs. Capacity 1st Stage - 3,000 lbs.
Height - 45”- 72” Capacity 2nd Stage - 1,000 lbs. Capacity 2nd Stage - 2,000 lbs.
Base - 24” x 24” Height - 37”- 71” / Base - 39” x 39” Height - 35.5”- 71.5” / Base - 34” x 34”

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 RFJ-4000AL

45

Lifting Features & Specifications

Jacks & Lifting

SERIES FEATURES: • Quick adjust spin handle with thrust bearing • Pneumatic operated wheel lift
• Wide base provides maximum stability • One-handed lever control
• Welded steel construction for • Thick, rubber adjustable pad for • Heavy-duty steel casters
maximum durability maximum support • Bearing mounted slider
• Safety ratchet design assures stands • Convenient handle and column release • Stabilizes vehicles raised on lifts
remain locked under load • Hardened ACME screw for easy adjustment • Heavy-steel construction for
• Perfect for holding drive-train or • Tripod design evenly distributes weight maximum durability
exhaust components in position
• Sold in pairs

RJS-3T RJS-6T RJS-12T

Holding Capacity - 6,000 lbs. Holding Capacity - 12,000 lbs. Holding Capacity - 24,000 lbs.
Height - 11.5”- 17” Height - 15.5”- 24.5” Height - 20”- 30.5”

Base Dimensions - 7” x 7.5” Base Dimensions - 9” x 10.5” Base Dimensions - 14.5” x 13”
RJS-1T RJS-1TF RJS-2TH
Tripod
High Reach High Reach
Jack Stand Jack Stand Jack Stand
Foot Operated

Holding Capacity - 1,650 lbs. Holding Capacity - 1,650 lbs. Holding Capacity - 4,000 lbs.
Height - 54.5”- 80.5” Height - 54.5”- 80.5” Height - 55”- 87”
Base Dimensions - 12” Base Dimensions - 12”
MLS-18 RWL-150T Base Dimensions - 24” x 24”
Mobile
High-Lift
Jack Stand

Holding Capacity - 18,000 lbs. RWL-150T
Height - 48.75”- 74.5” Lifting Capacity - 150 lbs.
Base Dimensions - 32” Pneumatic Operation

Fits R980XR/NXT/AT & R30XLT

46 For full product details and specifications, please visit www.bendpak.com

SERIES FEATURES: Lifting Features & Specifications

• Constructed out of 12-gauge steel Motorcycle Lifts
• Pneumatic lifting cylinder
• Durable powder-coat finish • Built-in retractable swivel casters
• Adjustable front wheel vise • Full travel automatic safety locks
• Drop-away rear wheel deck • Single hydraulic lifting cylinder
• Easy ramp(s) removal • Side decks can be easily removed
• Front and side extensions standard • Diamond-plate approach ramps
• Air or hydraulic pump operation
• Multiple locking positions

RML-600XL RML-1500XL RML-1100
Super Stretch

Lifting Capacity - 1,000 lbs. Lifting Capacity - 1,500 lbs. Lifting Capacity - 1,100 lbs.
Height - 7.5”- 45” / Table Width - 24”- 44” Height - 7”- 45” / Table Width - 30”- 53” Height - 3.5”- 16”

Table Length - 79”- 98” Table Length - 89”- 102” Top Dimensions - 6”- 17.75”
Heavy 12-gauge steel construction Retractable real wheel deck
RML-1500XL Side Extensions
Super Stretch

Extended platform length Full travel automatic safety locks
Single hydraulic lifting cylinder Approach ramp extension

Rear support poles

Built-in retractable swivel casters
can be moved when loaded

RML-1100 Air or hydraulic pump operation
Optional Jack Stand

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 47

Shop Equipment Series Features & Specifications

Shop Equipment

INFORMATION:

Let Ranger Products lighten the load with our considerable line of high-quality rolling equipment. All Ranger Carts and Dollies are
made from high-gauge steel and employ only the best casters for easy maneuvering. Our service carts, chassis-mount vehicle
dollies, low-profile automobile carts and rolling adjustable work tables come fully equipped to make your day in the garage infinitely
easier. Don’t lift or carry—roll with Ranger!
Ranger’s industrial shop presses offer you the versatility of professional-grade hydraulic force, whether you’re at the shop or in
your own garage. Among other operations, all Ranger Hydraulic Presses are ideal for the removal and installation of gears, bushings
and bearings—so you can bend, straighten, flatten, crush, press, shape, push, pull, lift and spread like you were born doing it.

RCD-1TD RCD-2V RP-20T
Auto Carts Vehicle Dolly Bottle Jack
Shop Press

Capacity - 1,000 lbs. (Each) Lifting Capacity - 4,400 lbs. (Each) Capacity - 40,000 lbs.
Dimensions - 15.5” x 23.5” Overall Height - 10” Cylinder Stroke - 8”
3.5” Cast Iron Ball Bearing Casters Caster Size - 4.5” Width - 23” / Height - 59”
RCD-1500EX
RCD-1500 TM GoCart™ RP-20HD
TM GoCart™ Vehicle Dolly Hydraulic
Extended Shop Press
Vehicle Dolly
TM
TM
TM
TM

Load Rating Each - 1,500 lbs. Load Rating Each - 1,500 lbs. Capacity - 40,000 lbs.
Tire Width Capacity - 12” Tire Width Capacity - 13” Cylinder Stroke - 5.5”
Width - 37” / Height - 60.25”
Tire Diameter Capacity - 15”- 28” Tire Diameter Capacity - 19”- 39” Integrated 4” diameter
GoCart™ 20-ton pressure gauge

TM Storage Rack Hydraulic cylinder moves laterally

TM

TM

Load Rating - 200 lbs. Adjustable table height
Dimensions - 19” x 31” x 9” RP-20HD
Holds up to 4 GoCart™ Dollies

48 For full product details and specifications, please visit www.bendpak.com

RWB-2D FEATURES: RWB-2S FEATURES: RWB-1TD FEATURES:

• Electrostatic triple-baked protective • Glossy red finish • Lockable heavy-duty drawer
powder coat • Electrostatic oven-baked powder coat • 500-lb. working capacity
• Rolled edges for added strength • Heavy-duty 4” casters
• Rolled edges for added strength and rigidity • Adjustable working height
and rigidity • 5/32” HD rolled edge steel table top • Removable polyethylene fluid drain
• 3/32” HD rolled edge steel shelves • 14-gauge table top
• Full-extension ball bearing drawer slides • 12-gauge construction • 3/4” liquid containing rim
• Tumbler key-lock pivot drawer

latching system

RWB-2D RWB-2S RWB-1TD
2-Drawer Work Bench 2-Shelf Work Bench Work Bench w/Fluid

Catcher

Height - 34.5” Height - 34.5” Height - 40”
Width - 59” Width - 79” Width - 48”
Depth - 25.25” Depth - 25.25” Depth - 32”

RH-50PL RH-50PL
Hose Reel
4-direction, non-snag rollers

Use for air or water

Air Pressure - 300 psi 49
Hose Length - 50’
Fittings - 3/8”

Anti-lock out ratchet mechanism
prevents reel from locking up
when hose is fully extended

Solid brass swivel fitting
Wall, floor, or ceiling mount with a
7” x 8” reinforced mounting base

1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970

Shop Equipment Series Features & Specifications

Shop Equipment

SERIES FEATURES: • Tough construction will resist dents, • Crushes cans in only 15 seconds
rust, and corrosion • 100% air operated
Oil Drains • Rugged funnel with built-in • Fulfills EPA and other mandated
• Lightweight for easy portability contamination screen environmental standards
• Safe and easy to use Oil Filter Crushers • Removes up to 95% of the oil
• Non-corrosive telescoping tube • Reduces cans up to 20% • Compact floor or bench-mount design
• Heavy-duty stainless steel clamp • Reduces filters up to 25% • All-steel industrial construction
• Built-in hand grips
• Durable steel construction

RD-9G RD-18G RD-15 RD-20SE
Air Evac
Oil Drain

Capacity - 9 gal. Capacity - 18 gal. Capacity - 15 gal. Capacity - 20 gal.
Height - 32”- 64” Height - 48”- 72” Height - 8.5” Height - 52”- 83”
Funnel Diameter - 18” Evacuation Pump Funnel Diameter - 16”
Shipping Weight - 52 lbs.
RP-20FCS RP-20FC RP-30FC
Stand Oil Filter Oil Filter
Crusher Crusher

Capacity - 230 lbs. Capacity - 10 Ton / Cycle Time - 15 - 20 sec. (Stand Included)
Unit Weight - 72 lbs. Air Requirements - 125 - 175 psi Capacity - 15 Ton / Cycle Time - 8 - 15 sec.
Dimensions - 42” x 27.75” x 17.75” Dimensions - 29.5” x 17” x 17” Power Supply - 208-240V / 50/60Hz / 1 Ph

RP-50FC Dimensions - 75” x 42.5” x 17”
Super Duty

Oil Filter
Crusher

(Stand Included) See it on the BendPak / Ranger YouTube Page
Capacity - 25 Ton / Cycle Time - 8 - 15 sec.
Power Supply - 208-230V / 50/60Hz / 1 Ph

Dimensions - 90” x 32.5” x 31.5”

50 For full product details and specifications, please visit www.bendpak.com