Art. 200PET70AA - pradestapes.com

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 200PET70AA

TECHNICAL DATA SHEET

CARRIER Transparent PET film
ADHESIVE SYSTEM Water based acrylic
RELEASE LINER White paper

DESCRIPTION

For the permanent, self-adhesive lamination of even surfaces. Very well
processible, provides excellent
adhesion to almost all materials like plastics, films, wood, glasses or metals
with excellent flatness. Suitable
for in- and outdoor application.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 70
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 90
Liner thickness N/25 mm 11
- 40 °C
Peel Adhesion + 150 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

TECHNICAL DATA SHEET

CARRIER Clear PP film
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER

DESCRIPTION

Tear tape system specially developed for use on fibreboard and corrugated
cartons.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 87
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 50
Liner thickness N/25 mm 16
- 20 °C
Peel Adhesion + 70 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 2400TEARTAPE4x20000

TECHNICAL DATA SHEET

CARRIER Clear PP film
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER

DESCRIPTION

Tear tape system specially developed for use on fibreboard and corrugated
cartons.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 87
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 152
Liner thickness N/25 mm 16
- 20 °C
Peel Adhesion + 70 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 300PET160AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER White paper

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good
performance also on low surface energy substrates. Used extensively for
seaming vinyl banners

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 160
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 140
Liner thickness N/25 mm 33,9
- 20 °C
Peel Adhesion + 100 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 300PET70ASP/R

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Differentially Solvent Acrylic
RELEASE LINER White paper

DESCRIPTION

Differentially coated with two separate acrylic adhesives. The liner side is a
controlled tack adhesive system to allow the end user easy removal with no
residue. The exposed side is an aggressive, high tack, high peel formulation.
Both adhesives are excellent in low temperatures as well as normal and are
resistant to UV, moisture, solvents, mild acids, oil, and grease. Excellent
adhesion to metals, glass, films, paper, and some treated polyolefins.
Primarily used where removability of foam or other products from substrates is
required, i.e., signs and nameplates.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Carrier + adhesive Microns µ 70
thickness AFERA 5006
Liner thickness AFERA 5001 Microns µ 140
Peel Adhesion AFERA 5001 N/25 mm
N/25 mm 4,5
Temperature resistance 15,6
- 20 °C
+ 107 °C

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 300PET90AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER White paper

DESCRIPTION

Designed for superior splicing of low surface energy materials such as
polyethylene, polypropylene, nylon, and polyester.
Also used as a laminating adhesive for polyethylene foams.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 90
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 140
Liner thickness N/25 mm 33,9
- 40 °C
Peel Adhesion + 135 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3300PET210AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER Red polypropylene

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good
performance also on low surface energy substrates.High temperature
resistance.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 200
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 140
Liner thickness N/25 mm 28
- 20 °C
Peel Adhesion + 200 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3300PET23G

TECHNICAL DATA SHEET

CARRIER Yellow polyester film
ADHESIVE SYSTEM Thermosetting rubber
RELEASE LINER

DESCRIPTION
Ideal for core and interlayer insulation and winding taping

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 60
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ -
Liner thickness N/25 mm 12
- 20 °C
Peel Adhesion + 130 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3300PET50G

TECHNICAL DATA SHEET

CARRIER Yellow polyester film
ADHESIVE SYSTEM Thermosetting rubber
RELEASE LINER

DESCRIPTION
Ideal for core and interlayer insulation and winding taping

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 90
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ -
Liner thickness N/25 mm 12
- 20 °C
Peel Adhesion + 130 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3400DS31G

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER White paper

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good
performance also on low surface energy substrates.
High temperature resistance.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 100
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 110
Liner thickness N/25 mm 25
- 25 °C
Peel Adhesion + 120 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3400PET90AHM

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Hot melt
RELEASE LINER White paper

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good
performance also on low surface energy substrates.

METHOD AFERA 5006 UNIT 90
Microns µ
Carrier + adhesive AFERA 5006 90
thickness AFERA 5001 Microns µ 15
Liner thickness N/25 mm - 20 °C
+ 80 °C
Peel Adhesion

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 3400PET90AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent acrylic
RELEASE LINER White paper

DESCRIPTION

For all mounting and bonding applications. High adhesion,very good
performance also on low surface energy substrates.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 90
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 100
Liner thickness N/25 mm 15
- 20 °C
Peel Adhesion + 120 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 400PET65AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic/Rubber based
RELEASE LINER PE film

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good
performance also on low surface energy substrates. Used extensively for
seaming vinyl banners

METHOD UNIT TYPICAL VALUE
Microns µ 65
Carrier + adhesive AFERA 5006
thickness AFERA 5006 Microns µ 50
Liner thickness N/25 mm
N/25 mm 3
Peel Adhesion AFERA 5001 AS 12
Temperature resistance AFERA 5001 RB - 20 °C
+ 70 °C

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 600PET210AS

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER Red polypropylene

DESCRIPTION

For all mounting and bonding applications.High adhesion,very good performance also on low
surface energy substrates. High temperature resistance.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 200
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 140
Liner thickness N/25 mm 28
- 20 °C
Peel Adhesion + 200 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 600PETSIL120R

TECHNICAL DATA SHEET

CARRIER Orange polyester
ADHESIVE SYSTEM Silicone
RELEASE LINER

DESCRIPTION

Special silicone adhesive exhibits high temperature resistance and excellent adhesion to
silicone treated materials at elevated temperatures.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 120
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ -
Liner thickness N/25 mm 8
- 20 °C
Peel Adhesion + 220 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 600PVC210AS

TECHNICAL DATA SHEET

CARRIER White PVC
ADHESIVE SYSTEM Solvent Acrylic
RELEASE LINER Brown paper

DESCRIPTION

High adhesion,very good performance also on low surface energy substrates.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 210
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 110
Liner thickness N/25 mm 8

Peel Adhesion - 20 °C
+ 90 °C
Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 900156

TECHNICAL DATA SHEET

CARRIER Clear PET film
ADHESIVE SYSTEM Acrylic
RELEASE LINER Fingerlift PP film

DESCRIPTION

High speed flying splices on heatset web offset presses in printing industry.
Self-splitting tape. Horizontal application.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 100
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 65
Liner thickness N/25 mm 83,0/12,00

Peel Adhesion - 20 °C
+ 120 °C
Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 900158

TECHNICAL DATA SHEET

CARRIER Clear PET film
ADHESIVE SYSTEM Acrylic
RELEASE LINER Fingerlift HDPE film

DESCRIPTION
Ideal for re-sealable OPP plastic bags.Hot knife cuttable re-usable tape.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 30
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 55
Liner thickness N/25 mm 6,0/10,00

Peel Adhesion - 20 °C
+ 120 °C
Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 900200

TECHNICAL DATA SHEET

CARRIER Clear PET film
ADHESIVE SYSTEM Water based acrylic
RELEASE LINER Fingerlift White paper

DESCRIPTION
It is the ideal product for self seal sterilization pouches.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 65
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 65
Liner thickness N/25 mm 8,5
- 20 °C
Peel Adhesion + 149 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. 900MM126HC

TECHNICAL DATA SHEET

CARRIER Clear PET film
ADHESIVE SYSTEM Hot melt
RELEASE LINER Fingerlift plastic film

DESCRIPTION

Ideal for permanent sealing of HPDE and OPP plastic bags.Hot knife
cuttable permanent tape.

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 70
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 55
Liner thickness N/25 mm 13,0/11,00

Peel Adhesion - 20 °C
+ 80 °C
Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

Prades srl Tel. +39 49 9002797
Via 1° Maggio, 9/11 Fax. +39 49 9002798
35035 Mestrino E-mail: [email protected]
(Padova) Italy Web: www.prades.it

Art. MAGELLANO P

TECHNICAL DATA SHEET

CARRIER Clear polyester
ADHESIVE SYSTEM Solvent acrylic
RELEASE LINER White paper

DESCRIPTION
High perfrormance sailmaker’s bonding tapes

METHOD AFERA 5006 UNIT TYPICAL VALUE
Microns µ 165
Carrier + adhesive AFERA 5006
thickness AFERA 5001 Microns µ 140
Liner thickness N/25 mm 33,9
- 40 °C
Peel Adhesion + 200 °C

Temperature resistance

SAFETY AND DISPOSAL INFORMATION

q The adhesive does not contain heavy q Catalogued as " Not Hazardous Special
metal, formaldehyde and aromatic Industrial Waste"
amines

NOTE

To apply the self adhesive tape it is necessary that the surface is clean and dry.
To maintain the product functionality the tape must be kept in their original packaging, the temperature
must be between 15 and 22 C°, the humidity level below 65%. Do not expose the product to direct light
and heat source. In this condition the product maintains their characteristics for 12 months.
The values of this technical datasheet are based on our test we believe to be reliable and correct,
nevertheless, they cannot represent any form of warranty ,either expressed or applied.
User shall rely on his own information and tests to determine suitability of the product for the intended
use, and the user assumes all risk and liability resulting from the use of this product. Do not hesitate to
contact us for any question.

SIZE ROLL/CART

12x50 25
15x50 20
19x50 16