ABOVE SIGNS AVAILABLE IN ABS PLASTIC, CROMADECK OR DIBOND.
STANDARD SIZES.
A SAFETY SIGN MUST BE ON SQUARE SHEETS OF THE
APPROPRIATE MATERIAL AND OF ONE OF THE FOLLOWING SIZES:
150 x 150 mm; 190 x 190 mm; 290 x 290 mm;
440 x 440 mm; 880 x 880 mm
Control Regulatory
D SPEED D
LIMIT mm
D ON
ROAD 600
SIZE KM/H 900
1200
Command R100 SERIES 0-60
61-80
81-100
R200 SERIES - PROHIBITION
D SPEED D
D LIMIT mm
ON
ROAD 600
KM/H 900
1200
0-60
61-80
81-100
R300 SERIES - RESERVATION
SPEED D
LIMIT mm
ON
ROAD
KM/H
0-60 340 x 450 mm
61-80 675 x 900 mm
81-100 900 x 1200 mm
Comprehensive - restriction-times
R500 SERIES Symbol message
L
W100/200 Direction of movement
SPEED D
LIMIT mm
ON
ROAD 900
KM/H 1200
1500
0-60
61-80
81-100
W300 SERIES - SYMBLOIC
W300 SERIES - SYMBOLIC
W400 SERIES - HAZARDOUS MARKERS
Hazard marker
Temporary Combination
SPEED R1 R1.1 R1.3 R1.5A R2 R2.1 R2.2 R3 R4.1
LIMIT & & & &
ON 600 900 R6 R4.2
ROAD 900 R1.2 R1.4 R1.5B 1200 &
KM/H 1200 1200
1200 900 1500 R4.3
0-60
1200 249 600 900 225x330 600 600x450
61-80 900 900x675
1500 373 900 1200 338x450 1200 1200x900
81-100 1200 1200x900
1500 497 1200 1200 450x600
101-120
497 1200 1500 563x750
HAZARD AND OTHER SIGNS
1.1 - 1.3 1.4 1.5 1.6 2.1 2.3
1 1.4 1.5 1.6 FLAMMABLE GAS FLAMMABLE GAS NON-FLAMMABLE AND NON-FLAMMABLE AND TOXIC GAS
3 NON-TOXIC GAS NON-TOXIC GAS
1 1 1 2 2 2
2 2
4.1 4.2 4.3 5.1 5.2 6.1
FLAMMABLE FLAMMABLE FLAMMABLE SPONTANOUSLY DANGEROUS DANGEROUS OXIDISER OXIDISER TOXIC
LIQUID LIQUID SOLID CONBUSTIBLE WHEN WET WHEN WET
5.1 5.2 6
3 3 3 4 4 4
6.2 7 89
INFECTIONS RADIOACTIVE RADIOACTIVE RADIOACTIVE CORROSIVE 9
SUBSTANCE
7 7 7 8
6
B2 B3 B4 B5
DANGEROUS
MULTILOAD DANGER WARNING GOODS ELEVATED
IDENTIFICATION TEMPRATURE
DANGEROUS GOODS PLACARD DESIGN -
12 1. Goods identification zone
2. Operator telephonic advice zone
3. Specialist telephonic advise zone
4. Hazard class diamond zone
5. Position of hazard class diamond or multi
load diamond
6. Position(s) of sunsidiary risk diamond(s)
TRAFFIC CONES
SOFT TRAFFIC CONE
760 mm Soft Cone 450 mm Soft Cone 300 mm Soft Cone
RECYCLED PLASTIC HEAVY BASE CONE
760 mm Heavy 500 mm Heavy 450 mm Heavy
Base Cone Base Cone Base Cone
FLEXIBLE HEAVY DUTY
PVC CONE INDUSTRIAL CONE
1.8 m Heavy Duty
Industrial Cone
Available in:
Red, white,
orange, yellow,
green & blue
700 mm Flexible 450 mm Flexible
PVC Cone PVC Cone
VEHICLE VISIBILITY
Reflective Honey-Comb Vehicle numbers
400X300MM 300X300MM
LV 020 020
720X200MM
MS-CR010
Reflective Conspicuity Tape
Conspicuity 55mm 3M Yellow
Conspicuity 101mm 3M Red
White
Yellow
Red
Also available on Magnet
ROAD DEMARCATION SYSTEMS
STANDARD MOBILE BARRIER VIKELA
DELINEATORS SYSTEM DILNEATORS
GUARDRAIL ROUND RUBBER 3 HOLE
REflECTOR BASE RUBBER BASE
Construction Boards
CAUTION
ROAD WORK AHEAD
logo here
CONSTRUCTION SITE
NO UNAUTHORISED ENTRY
tel nr. 0000000000
PLEASE REPORT TO SITE OFFICE
Chromadek
SOCIAL DISTANCING
12 3
HAND WASHING TECHNIQUE
WITH SOAP AND WATER
Wet hands Apply enough soap to Rub hands palm to palm Rub back of each hand Rub palm to palm with
with water cover all hand surfaces with palm of other hand fingers interlaced
with fingers interlaced
Rub with backs of fingers Rub each thumb clasped Rub tips of fingers in Rub each wrist with Rinse hands with water
opposite palm in a opposite hand
to opposing palms with in opposite hand using a circular motion
fingers interlocked rotational movement
Hand washing should take
40-60 seconds
Use elbow to turn off tap Dry hands thoroughly Air-Dry hands thoroughly
(if no elbow tap available with a paper towel
Use paper towel to turn off tap)
4 PLEASE STAY 1.5M APART
AT LEAST
CAUTION5PRACTICE SOCIAL DISTANCINGCAUTION6 7 8
Please Wear a
PRACTICE SOCIAL DISTANCING COVID COVID Face Mask
19 19
9 Thank You
PLEASE PLEASE
STAND HERE SANITISE YOUR 12
HANDS
10 11
PERSPEX SCREENS
Custom made Screens for
Reception Counter Tops
and Desks.
SIGN POSITIONING
Regulatory and warning
2100 mm 1500 mm 2100 mm 300 mm
minimum
Road Surface
600 - 800 mm Shoulder 600 - 800 mm Edge of Road Surface
Breakpoint Curb With Curb
No Curb
Hazard Makers
600 mm 600 - 5000 mm 600 mm 300 mm
Road Surface
Road Surface
Shoulder
600 mm Breakpoint 600 mm Shoulder
Breakpoint
Guidance Signs Rural: 1500 mm
Urban: 600 mm
N4
800 mm min
1200 mm
Road Surface700 - 1200 mm700 - 1200 mm
Shoulder
Breakpoint
Dimensions shown are recommendations only.
Site conditions and national/provincial specifications can differ and must be adhered to.
STEEL POLES AND CLAMPS
STEEL POLES CLAMPS
ROUND WEIGHT POLE CLAMP BOLT SIZE
kg/m DIAMETER
43 - 57 mm P1115 M8 x 40
50 mm x 1.6 mm 1.941 54 - 70 mm P1117 M8 x 40
71 - 85 mm P1118 M8 x 50
76 mm x 2 mm 3.660 87 - 95 mm P1119 M8 x 50
99 - 110 mm P1120 M10 x 40
100 mm x 2 mm 4.913 100 - 112 mm P1121 M10 x 50
116 - 140 mm P1122 M10 x 50
100 mm x 4 mm 9.628 135 - 145 mm P1123 M10 x 50
155 - 180 mm P1124 M10 x 50
D-SECTION 175 - 206 mm P1125 M10 x 50
188 - 228 mm P1126 M10 x 65
76 mm x 2 mm 3.847 235 - 270 mm P1127 M10 x 65
260 - 285 mm P1128 M10 x 65
100 mm x 2 mm 5.539
100 mm x 4 mm 10.881
SQUARE
50 mm x 50 mm 1.496
100 mm x 100 mm 6.181
PAINTED OR GALVANISED
NUMBER OF POLES PER SIGN NUMBER OF CLAMPS PER SIGN
LENGTH OF SIGN POLES HEIGHT OF SIGN CLAMPS PER POLE
0.0 m - 1.2 m 1 0.0 m - 1.2 m 2
1.2 m - 3.9 m 2 1.5 m - 2.4 m 3
4.0 m - 7.2 m 3 2.5 m - 3.6 m 4
3.7 m - 4.8 m 5