SAWMILL EXCHANGE HOUSTON, TX 77071 Table of Contents

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 1

HOUSTON, TX 77071

Table of Contents

Band Sawmills (71) ........................................................................................................................... 1

Band Mill Tools (1) ..................................................................................................................... 1
Band Sawmills, Complete Operations (6) .............................................................................. 1
Band Sawmills, Hydraulic (35) ................................................................................................ 1
Band Sawmills, Manual (20) .................................................................................................... 2
Band Sawmills, Upright Band Sawmills (8) ........................................................................... 3
Band Sawmills, Wide Capacity (1) .......................................................................................... 3

Circular Sawmills (92) ...................................................................................................................... 3

Accessories (4) ........................................................................................................................... 3
Bolters (2) ................................................................................................................................... 3
Circular Sawmills, 1 - 2 Man (29) ............................................................................................ 3
Circular Sawmills, Automatic (21) .......................................................................................... 4
Circular Sawmills, Complete Operation (8) ........................................................................... 5
Circular Sawmills, Handset (28) .............................................................................................. 6

Everything Else ................................................................................................................................. 6

Air Compressors (5) .................................................................................................................. 6
Attachments (5) ......................................................................................................................... 6
Baggers/Balers (3) ..................................................................................................................... 7
Band Resaw (4) .......................................................................................................................... 7
Banding/Strapping (2) .............................................................................................................. 7
Bandsaw (3) ................................................................................................................................ 7
Blades (8) .................................................................................................................................... 7
Boilers (1) ................................................................................................................................... 7
Boring Machine (2) .................................................................................................................... 7
Cant Sizer (1) ............................................................................................................................. 7
Chain Saws (1) ........................................................................................................................... 7
Chippers and ChipPacs (14) ..................................................................................................... 7
Chippers, Hogs, Mulch Manufacturing (3) ............................................................................. 8
Chop Saws/Cutoff saws (4) ...................................................................................................... 8
Conveyors (5) ............................................................................................................................. 8
Cranes (1) ................................................................................................................................... 8
Cut-Up Line Equipment (1) ....................................................................................................... 8
Cutstock Manufacturing (1) ..................................................................................................... 8
Cyclones (4) ................................................................................................................................ 8
Debarkers (7) ............................................................................................................................. 8
Dip Tanks (1) .............................................................................................................................. 9
Doziers (2) .................................................................................................................................. 9
Dry Kilns (9) ................................................................................................................................ 9
Drying & Treating (1) ................................................................................................................ 9
Edgers, Board (9) ....................................................................................................................... 9
Edgers, Bull (2) .......................................................................................................................... 9
Edgers, Gang (2) ........................................................................................................................ 9
Edgers, Vertical (2) ................................................................................................................. 10
Extensions (2) .......................................................................................................................... 10
Feedworks (2) .......................................................................................................................... 10
Feller Buncher (2) .................................................................................................................... 10

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16

WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 2

HOUSTON, TX 77071

Filing Room Equipment (3) .................................................................................................... 10

Firewood Processors (4) ......................................................................................................... 10

Flooring Manufacturing (3) .................................................................................................... 10

Forestry Winch (1) ................................................................................................................... 10

Forklifts (13) ............................................................................................................................ 10

Furniture & Specialty Manufacturing (8) ............................................................................. 11

Gang Rips (6) ............................................................................................................................ 11

Gang Saws (5) .......................................................................................................................... 11

Grapple (1) ................................................................................................................................ 11

Green Chain (3) ........................................................................................................................ 11

Grinder (1) ................................................................................................................................ 11

Grinders (8) .............................................................................................................................. 11

Grinders, Circular Saws and Teeth (1) ................................................................................. 11

Hogs (2) ..................................................................................................................................... 12

Husk (2) ..................................................................................................................................... 12

Industrial Equipment (2) ........................................................................................................ 12

Industrial Truss Saw and Router (1) .................................................................................... 12

Jointers (1) ................................................................................................................................ 12

Kiln Components (3) ............................................................................................................... 12

Laser Sights (1) ........................................................................................................................ 12

Loaders, Knuckleboom (7) ..................................................................................................... 12

Loaders, Skid Steer (1) ........................................................................................................... 12

Loaders, Track (6) ................................................................................................................... 12

Loaders, Wheel (11) ................................................................................................................ 13

Log Decks (5) ........................................................................................................................... 13

Log Home Manufacturing (1) ................................................................................................. 13

Log Lathes (1) .......................................................................................................................... 13

Log Merchandizing (1) ............................................................................................................ 13

Log Splitters (1) ....................................................................................................................... 13

Log Turners (2) ........................................................................................................................ 13

Lumber Finishing (1) ............................................................................................................... 13

Lumber Stackers (1) ................................................................................................................ 13

Milling Machine (1) .................................................................................................................. 13

Mortisers/Drill Presses (2) ..................................................................................................... 13

Moulders (16) ........................................................................................................................... 13

Mulch Manufacturing/Coloring (1) ........................................................................................ 14

Package Saws (1) .................................................................................................................... 14

Pallet Manufacturing (4) ........................................................................................................ 14

Pallet, Dedusters (2) ............................................................................................................... 14

Pallet, Dismantlers (1) ............................................................................................................ 14

Pallet, Nailers (1) ..................................................................................................................... 14

Pallet, Notchers (2) ................................................................................................................. 14

Panel Saw (1) ........................................................................................................................... 14

Phase Converters & Electrical (3) ......................................................................................... 15

Planer/Moulder/Knives (1) ..................................................................................................... 15

Planers (28) .............................................................................................................................. 15

Post & Rail Manufacturing (5) ............................................................................................... 15

Post Peeler (2) ......................................................................................................................... 16

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE





TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16

WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 1

HOUSTON, TX 77071

This is the most current list of sawmill equipment for sale. This service is simple and straightforward. Buyers purchase directly from the
sellers and the sellers pay our fee. Please let us know if you are interested in any of this equipment or if you want to receive monthly
mailings. Also, please let us know if you have any equipment for sale.

Call 800-459-2148 and ask for Linda
Write Linda at P. O. Box 710930, Houston, TX 77271-0930
SAWMILL EXCHANGE is mailed monthly FREE OF CHARGE anywhere in North America

Please let us know if you would like a subscription

Call 800-459-2148
Band Sawmills

STATE AD # Band Mill Tools PRICE
Michigan (U.S.)
STATE
16768 Assorted Band Mill Tools: Suffolk Dual Tooth Setter. Automatic, Electric Sharpener. Band-Saw-Tooth Set Gauge. $3,125.00
Arkansas
AD # Band Sawmills, Complete Operations PRICE
Arkansas (U.S.)

British Complete Pallet Manufacturing Set up: 2014 Baker DP Dominator Band Sawmill. Fully Hydraulic with hydraulic power unit. 50 HP 3 phase $90,000.00
Columbia electric motor. Low hours. Kept inside. Capacity is 20' X 32", 7000 bf per day with 3 operators. Includes Debarker, Drag Back, Belt conveyor.
Band size is 20' X 1 1/2". 2014 Baker 3 Blade Edger with 2 fixed blades and 1 moveable. Stationary, 25 HP 3 phase electric motor. Capacity 2"
British 17274 thick X 20" wide. Morgan 2 Head Resaw with 20 HP 3 phase electric motor on each head. Cuts 8" wide by any thickness. All Hydraulic feed
Columbia Updated with belt return. Hurricane Chop Saw with conveyors on each end. 7 1/2 HP 3 phase electric motor. Largest model. Hermance Gang Rib Model
GS300. Includes 2 sets of blades and banding groove dado blades. Morgan single head Pallet Notcher with 10 HP 3 phase electric. Cyclone
Ontario Dust Collector with 1 blower and 25 HP 3 phase electric. JTV 930 Forklift with new Perkins 4 cylinder 62 HP engine. Has all terrain tractor
tires. Cooks automatic sharpener and manual setter. Wood-Miser 12' Log Deck that feeds to sawmill. Includes all electrical components.
Washington
STATE 17187 Cooks AC 36 Sawmill with 51 HP Perkins diesel and Cooks Edger with 38 HP diesel. All Hydraulic functions with Computer Setworks, $38,000.00
Alabama Debarker and Board Drag Back.
Arkansas
17288 Complete CKS Japanese sawmill cw 5 foot band saw with 3 bunk carriage with temposonics. Very accurate, cutting capability to 48" diameter $250,000.00
Connecticut and 28' long. Extremely accurate with log infeed, outfeed greenchain, blowers , hydraulics headrig with winch assembly, full CSA approved
Florida electrics over $100000.00 in electrical ( electrical room is 48' container easily moved). Can be easily dismantled to be moved(4-6 semi loads).
Florida Currently operating. Owner is scaling down operation. Very good sawmill to cut cants and high end timbers. Excellent condition and minimal
Ghana use. $250000.00 USD

Illinois 8047 Sawmill operation: E. Povlsen 5" high production double cut bandmill, 36"x42" throat capacity, fully hydraulic, 50 HP electric, live infeed, 50’ $55,000.00
Illinois bed with forward and reverse, Omron PLC computer setworks, stationary operator s position, 2 adjusting log turners, 2 timber turners, 3 air
Kentucky kickers, blade lubrication system, log/timber kickers, 3 leveling arms, 5 - 24 adjustable backstays, extra 5" bands, electric and air controls,
Kentucky Plexiglas sawdust screen, 33’ x 24" 12 roller powered outfeed roll case with integrated lifting arms. Easy to breakdown and load.
Kentucky
Kentucky 13733 Complete sawmill operation: Morbark rosserhead debarker, 50 HP 3-phase electric 575V, loaded by Patrick 14,000# wheel loader with 4' $130,000.00
Kentucky articulating arm, bucket and log forks, log kicker sends log to 20' 2-strand infeed deck with stop & load, 2005 Heartwood Model 310, 70 HP 3- Reduced
Kentucky phase electric 575V, 10 HP on hydraulics, includes 25 6" double cut bands, two sets of 40' of live outfeed rollers, one to Morbark 3-knife
Louisiana chipper with knife grinder, horizontal feed, bottom discharge to 60' barnsweep, 50 HP 3-phase and the other to Marathon 24P 2" x 24" 2-saw
edger with laser sight, 10 HP 3-phase, 20' live rollers to 24" end trimmer on stationary arbor, live outfeed rollers to greenchain. Mill only
operated for 13 months.

* LT 300 WOODMIZER with Off Load Conveyers *WOODMIZER Twin Blade Edger *CMC 20 foot double end trim Saw with setworks * Mellott $85,000.00
16836 Rosser Head "De-Barker" with in and out Log Decks * Baker single head re-saw *Newman 500 Planer All Electric (3 phrase) with Multiple

Heads *Morbark 48 inch 3-knife chipak *All connecting conveyers and sawdust removal blowers

AD # Band Sawmills, Hydraulic PRICE
(U.S.)

17297 1990 Wood-Mizer LT30 Hydraulic Band Mill. New Kohler 19 HP engine with less than 20 hours. New drive belt, new cutting console, new $13,500.00
Updated tensioner, 16' bed, log roller and hydraulic clamp. Reduced

17356 2001 TimberKing B20 Fully Hydraulic. Portable. 25 HP Kohler gas engine. 6 HP Briggs & Stratton engine to run Hydraulics. Low Hours. $17,000.00
New

12161 2002 Timber Harvester 36HTE25, 24' track, fully hydraulic, remote control with 100' cord, debarker, extra blades, 25 HP 3-phase, around 150 $25,000.00
hours. Includes WoodMaster 725 ProPak moulder/ripsaw/sander, 100 hours.

17327 2010 TimberKing B20. Fully Hydraulic. 30 HP gas engine. Computer Setworks. Portable. Original owner. Has regular maintenance. Also has $25,000.00
New sharpener/setter and 25 used blades in good condition. Planer - 16" wide. all additional equipment. blower. complete set of sanders and all
moulding attachments.

17022 2002 Cooks Accutrac MP 32 Portable Sawmill. 18 HP Kohler gas engine and additional 16 HP Kohler gas engine. Capacity is 20' X 32". Also $8,000.00
includes winch, metal detector, cant hooks, ramps, logging tongs, norwood sharpener and Cooks setter. Will not separate. Original owner. Reduced

SELECT 4221 band sawmill with 115 hp John Deere turbo diesel engine, with complete hydraulic system and computerized setworks Heavy- $90,000.00
16489 Duty Backpost (squaring arms) Hydraulically driven rollers on tapers Double edge cutting saws Setwork programmer 24' Log Infeed deck (2

chain) hydraulically driven 12' Outfeed deck (3 chain) continuous - 220V 50 Hz No of hrs – 976.1hrs Country of manufacture: Canada

17337 1991 Wood-Mizer LT30 Hydraulic with 24 HP Onan gas engine. Fully hydraulic mill with hydraulic log loader, 2 toe boards, 1 log clamp and 4 $12,000.00
New squaring arms. Roller Guide in and out. The head up and down and feed are electric with speed controller. Includes Wood-Mizer automatic
blade sharpener, tooth setter and extra blades. 819 hours. Good condition and saws true.

17189 2008 Wood-Mizer LT 50 Hydraulic Sawmill. 51 HP CAT diesel, 3565 hours, 12' bed extension, De-barker, Lube mizer, high performance guide $31,500.00
rollers, trailer axle and hitch, 6 stationary legs. Extra replacement parts, lots of blades- 1 ¼-1 ½ in 4, 7, 9, 10, and 13 degree hook angles

17307 2004 Cooks AC30. Fully hydraulic. New 70 HP Kubota diesel with about 200 hours. Band size is 1 1/2" or 2". Cap 20' X 36". Includes Cooks $20,000.00
Updated cats claw sharpener, setter and tension gage. 8-10 extra blades used.

17218 2008 Wood-Mizer LT50 fully hydraulic band sawmill. 9500 hours. Trailer package. Debarker. Lube mizer. Board drag back. Accuset 2 set $29,000.00
works. Extra bands. Good condition.

2010 Wood-Mizer LT70 Super Hydraulic with 55 HP Yanmar Diesel Engine. 5500 hours on mill. 1800 hours on Engine. Capacity 36" dia. x 20' $45,000.00
17206 2" long. Includes all standard operation and log handling features. Includes additional hydraulic unit to run all hydraulics to speed up

production.

16778 2000 TimberKing B20. Fully hydraulic. 27 HP Kohler. $18,000.00
Reduced

16935 1988 Wood-Mizer LT40 Hydraulic band sawmill. 24 HP Honda gas engine only 2 year old with 120 hours. Log lift. Includes Wood-Mizer $15,500.00
sharpener with tooth setter lightly used.

16892 1995 Timberking B20. Fully hydraulic. Fairly new 25 HP Kohler gas engine. Currently used and has regular maintenance. Portable. $18,000.00

2010 Cooks MP-32. 30 HP Kohler gas engine, 7 HP Kohler gas engine for hydraulics, trailer package with spare tire. Many extras: 12 volt head

16334 up/down/forward/reverse. Loading Winch Turner System. Third Squaring Arm. Log Loader Ramps. Metal Cant Hook. Blade Alignment Tool. $18,900.00

Cat Claw Sharpener and Single Tooth Setter. Extra Blades.

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE







TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 5

HOUSTON, TX 77071

Jackson Lumber Harvester. Fully Hydraulic and Automatic. Left handed. Carriage is 16'. Power not included but can run on diesel or electric. 4

Michigan 17269 Head Blocks but 1 is idle. Includes Vertical Edger Cab. Log Deck with 17' in feed, stop and load. 8' off bearing belt. 52" saw inserted teeth. $20,000.00

Capacity 16' X 34", 8-10,000 bf a day depending on logs. Kept inside.

Missouri 16654 Meadows #2 Circular Sawmill with 3 headblocks, 12' carriage, 100 Hp/ 3 phase/480 V motor, 2 Helle Hydraulic dogs, Saw Tech Computer $35,000.00
Setworks, 7 56" blades. Allen & Bradley Soft Starter. Jackson 18' 2 strand log deck with stop & load.

North 13296 1985 Edmiston automatic mill, right hand, 4 headblocks, 4 automatic dogs, 16' carriage, saw cab, 3-strand 18' log deck, 150 HP 3-phase $32,500.00
Carolina 12576 electric. No blade. Completely factory refurbished. Includes Morbark 48" 3-knife chipper, horizontal feed, top discharge, 150 HP 3-phase $55,000.00
Ontario electric. All electrical with starters and wall panel included. Also includes extra parts and components.
12213 $30,000.00
Oregon 2002 KARA Master with top saw, 16' 3-strand live deck with stop & load, 5 blades and Simonds 48" insert tooth saw, complete hammering
room.

Complete sawmill operation: Custom built 48" automatic sawmill with 42" head saw, 42" top saw and 3-saw vertical edger, right hand, all
steel, 3-strand live in feed deck with stop & load and forward and reverse, 3-head blocks with air dogs, 14' carriage, metric and standard dial,
dual-direction air drums, live out feed rolls and lumber decks, sawdust chain leads to 25' barn sweep, 3-phase 480 V, most electrical available.
Custom built 24" chop saw, air feed, foot petal controls, handles up to 8" cants. 12" x 12" single head band resaw with live feed rollers, air hold
downs, no return, 50 HP 3-phase, Morbark hammer mill, 16 knives, handles up to 6" material. Complete electrical room with panels, breakers,
etc.

Pennsylvania 17210 1974 HMC model 44 Automatic Circular Sawmill. Fair condition. 350 kw Onan Genset, Cornell 36" edger, Debarker, Misc parts and tools $75,000.00
included.

Pennsylvania 14935 Sawmill Operation: 40" CLEREMAN carriage with top saw, automatic, electric over air, right hand, 40 3-strand log deck with stop & load, 3 $78,000.00
headblocks, 16' carriage, sawyer cab, Tyrone Berry feedworks, two 56" headsaws, 36" top saw, Mellott hydraulic log turner, 36" sawdust
blower, SCHURMAN 6" x 36" combination gang edger/board edger, laser lights, at extra saws and spacers, infeed and outfeed decks, 36"
sawdust blower, 150 HP 3-phase power. CORNELL automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.
MELLOTT 40' vibrating infeed conveyor, 40' 3-strand GREENCHAIN, includes all electrical with starters. Averaging 15,000 bf grade per shift
in 5/4 and 6/4.

South 10438 1 Frick Circular Sawmill. Automatic, Right handed. All steel. 4 Headlocks. Mellow Hydraulic Log Turner. Berry 213 Hydraulic carriage drive. $48,000.00
Carolina 52" inserted tooth saw. 125 HP Westinghouse 3 phase motor. Includes: 21' 3-strand live deck 26" sawdust blower, sawdust conveyor, slab belt Reduced
Corley 8" x 60" Combination Gang Edger with automatic set Two 125 HP motors 12" infeed rolls, 60" 9' outfeed tailing belt conveyor 3-strand
9' rooftop chain to trimmer 19' deadroll conveyor to resaw 30' slab conveyor, sawdust conveyor 3-strand 45' separation deck/green chain 25'
block conveyor, sawdust conveyor 48" Precision 3-knife chipper 75 HP 3-phase. 5' screen and Phelps loading system All electrical, starters,
cables Complete set of transfers, decking and 198 Many extras

Wendt circular sawmill, mid 90's. electric over hydraulic, 4 presets, dual controls, 48" headsaw, clearance for 56" saw, 4 headblocks-3 live, 31"

Wisconsin 3327 opening, 12' carriage, 44' track, live deck w/stop&load, chain type log turner, sawdust chain, no power. Sawed less than 10,000 ft. Always $19,900.00

under cover.

STATE AD # Circular Sawmills, Complete Operation PRICE
(U.S.)

Morbark MorPack with topsaw and Meadows 2-saw vertical edger, right hand, portable on factory axle, 20' 4-strand infeed with stop & load, 4

headblocks, 14' carriage, 54" headsaw, 2 extra 36" topsaws, 2 extra edger saws, 150 HP 3-phase on headsaw, 50 HP 3-phase on topsaw, 50 HP

California 16664 on vertical edger, operator cab, computer setworks, tooth grinder, changing tools, 1000 extra teeth, 36" x 24' long outfeed rolls with lumber $275,000.00
(Central) stop and lumber kickers, 30' sawdust conveyor and 30' barnsweep, 50' 4-strand greenchain, Morbark 56" 3-knife chipper, 20' infeed, top

discharge, includes knife grinder and Babbitt pot, 150 HP 3-phase. All transfers and decking run by hydraulics, powered by 100 HP hydraulic

power pack with 100 gal. fuel tank. All electrical and disconnects included. **Same ad as 15359**

Maine 14066 Complete operating sawmill, Lane #1, right hand, Glover feedworks, 5 headblocks, 21’ carriage, foot receder, 48" inserted tooth headsaw, $10,000.00
sawdust blower. Frick 4"x22" 2-saw edger, both powered by 471 Detroit diesel engine, 20" trim saw, handles material 8" width and 3" depth, Reduced
3-phase power. 3 HP industrial shaper with knives for making raised panel doors, T&G of 1/2" and 3/8", $300 in knives included. Includes
many spare parts, numerous V-belts, bearings, and sprockets. Everything in fine working condition. Want everything off the property. Reduced
for quick sale.

New 15961 Circle sawmill with manual carriage 30" X 12', 48" headrig. Edger 2" - 12" wide, powered by 300 HP Mac engine (diesel). Band resaw. Building $28,900.00
Brunswick 20' wide X 60' length includes all lighting/electrical.

Ontario 13920 Sawmill operation: MORBARK rosserhead debarker with 3-strand 24' log deck, debarker handles logs 6" to 40" diameter, carbide cutter head, $250,000.00
Pennsylvania 17068 50 HP on the headsaw and 25 HP runs hydraulics, 60' outfeed bark conveyor, log kicker to live outfeed conveyor to HELLE automatic mill,
17069 right hand, push-button electric setworks, saw cab, 3 headblocks, 12' carriage, hydraulic log turner, several sawblades 54" to 56", live outfeed
Quebec conveyor, cants to 100' of green chain, boards to 6" BULL EDGER, using 2 to 7 blades, 40 HP 3-phase, slabs removed from outfeed conveyor
by kicker to FULGHUM 48"whole log 6-knife chipper, 75 HP 3-phase 460v, 10 HP air compressor. PATZ barnsweep 100' sawdust conveyor.
10,000 to 15,000 bf daily production. All electrical included with electrical panels.

COMPLETE CIRCULAR SAWMILL AND SHAVINGS MILL OPERATION INCLUDING PROPERTY! WILL SEPARATE BUT HUGE DISCOUNT IF

PURCHASED TOGETHER! 10 acres in Sterling, PA with 12x20 office building, 3700 sq. ft. mill building with attached generator room and

loader garage(12x30). Well and septic. $160,000 1999 John Deere TC54H Wheel Loader with JRB quick disconnect for Unitool forks with

clamp and 3 yd. bucket $30,000 Cat 3406 Generator. 320KVA with 600amp disconnect $5000 15KVA transformer. 240/480 to 120/240 $500

Morbark Mor-pac Automatic Sawmill(125hp) with top saw(30hp) and 2-saw vertical edger(40hp) with Silvatech Setworks, 4x4 booth, stop and

loader, 16'x18'' transfer belt, and shadow light. $35000 Tyrone-Berry SMA 215 Carriage Drive with 60hp motor. $5000 12' x 18' log deck. 15

hp $1000 Hosmer Mod. V206H rosserhead debarker with 30hp motor and stop and loader. $7500 Cornell 60' bark conveyor. $1500 Mellott 3- $315,000.00
strand x18' log deck $4000 Cornell sawdust conveyor(54') $1500 12' x 18'' spiral rollcase $1000 7' x 10' transfer chain $1000 JA Vance 16'

double end trimmer(hydrolic set) $3000 20' vibrating conveyor $1200 Morbark 48'' 3-knife chipper with 75 hp motor and Safetronics soft start

starter $12000 Precision 5x5 chip screen with cyclone $2500 Shutte 1390 hammermill with 75 hp motor and 20hp chip blower $5000 Cornell

5 hp fines blower $250 Cornell chip conveyor(18''x22') $2000 10hp Morbark chip loader $500 Mellott 8'x20' greenchain $2000 Ingersol Rand

T30 10hp 3 phase compressor $1000 Amp 10 hp 3 phase compressor $100 Ingersol Rand 4 hp single phase compressor $300 Precision 3 knife

tub grinder $1500 2 55 gal. Skid tanks with 24 volt fuel pump $1000 Precision Sharpening Devices portable chipper knife sharpener $500

Misc. tools, spare parts, saws, electric starters and disconnects $10000 IME 8230 HO Shaving Mill w/ belt conveyor $40000

Complete Circular Sawmill Includes: -Morbark 628 Debarker with an hydraulic system, cabin with deck -48" circular saw with top saw, $80,000.00
operator cabin includes a Silvatech system (operator platform with deluxe seats, joystick, console and controls) -log turner -hydraulic pump -
carriage Cardinal 12'6" with automatic lubrification and rails 48ft long -Trimmer "walk-in style" for 4'-12' -conveyor: different kinds of
conveyors (drop tilt conveyor, conventional conveyor, vibrating conveyor) -bull 8" clean cut type bull -Chipper Morbark with 75hp engine,
metal detector and extra set of knifes -electric room : 600v, soft start, used 3 years -all the equipment is in good condition and available now.
$110000 CAN or current US exchange rate $

Hurdle Sawmill with many labor saving devices. The mill has not been run in over 5 years. It is mostly steel. It has live decks, air compressors,

54" FH head saw, bark conveyers, sawdust chain, slab conveyers, belts and all electric switch boxes and wire. Mill is on wheels and can be

pulled. Deck is 3 strand and 44' long and is on wheels and can be pulled. Power House is on wheels. - All Steel Log Deck, 34' long x 12' wide, H

178 Chain with Stop and Loader - Gardner Denver Air Compressor, 200 PSI, 3 Phase - 620 Fulghum Rosser Head Debarker, Cap 20' log,

South 16165 Motors, Gear Box, Starters, Switches - 17' Cornell Log Deck, 878 Chain, Heavy Duty Hurdle Chain Type Log Turner with all gear boxes, drives, $117,500.00
Carolina and switches - Carenth AL36, 3 Headblocks, 13' Long, 3 Sets Trucks, Hydraulic Set Works - 213 Hydraulic Feed with Air Compressor, Pulls off

of Mandrell - 3 Deck-in-one, 44' Long, 12' Wide, 5th Pin Gear Boxes, Motors/Switches/Starters, All Attached. 120 Roller Chain, Deck 1 & 2,

H130 Roof Top Chain - Miner Edger 230 with 30 HP Motor, Starters, Switches, Tailing Device - Power Supply House for all of mill with inlets -

Morbark 58", 3 Knife Chipper, Horizontal Feed, Top Discharge, 125 HP Electric Motor, Starter/Switches/Gears, 6 x 6 Fulgum Chip Screen and

Cyclone with motors, starters, switches - Chip Loading System

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE







TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 9

HOUSTON, TX 77071

Mississippi 17014 2006 Precision Husky Debarker. Model P742H. Low hours. Specs: Barking Head 12” Dia. X 12” Wide Debarker Motor 30 HP [22kw] Range of $55,000.00
Log Lengths 8' to 20' [2.44m x 6.10m] Log Passed 25' [7.62m] Range of Log Diameters 7" to 42" [178mm to 1067mm] Log Kicker Arms 5 Log
Kicker Cylinder Dia (2) 3-1/2" [89mm] Log Rotation Rolls 6 Sets Rotation Roll Shaft Size 3-7/16" [87mm] Hydraulic System Motor 25HP [19kw]
Variable Speed Yes Machine Dim. Width 6'-11" [2.11m] Machine Dim. Length 33'-0" [10.06m] Machine Dim. Height 8'-1" [2.46m] Carriage
Overhang 1'-3" [381mm] Machine Weight 15,000 lbs [6804kg

New York 16739 Select Debarker, 20' live deck, (2) 25Hp Kohler gas engines, like new condition $42,500.00

South 16167 Bark Machine and 2 big pallets of bark $2,000.00
Carolina
14730 Custom built debarker, 8" blade mounted on pivoting arm, designed as either stand-alone system or sawmill mounted, v-belt driven by a 3 Ph $1,000.00
Virginia motor on top, includes concrete counterweight that keeps it from sawing down into the log if mounted on the sawmill.
PRICE
STATE AD # Dip Tanks (U.S.)
$5,000.00
South 16079 Dip Tank, 5' wide, 43" deep, 20' length. Only tank and no hydraulics. No power. Reduced
Carolina

STATE AD # Doziers PRICE
(U.S.)

Illinois 17349 This is a D6C, Serial# 74A 854. We just put it thru the shop and has just been checked out. Very nice machine, ready to go to work. $14,900.00
New

Tennessee 17240 T6 International Dozier with Winch. No Blade. Has 4 cyl gas engine. Used regularly. $3,500.00

STATE AD # Dry Kilns PRICE
(U.S.)

Arkansas Irvington-Moore dry kiln components for 70' x 34' package kiln (approximately 80,000 bf capacity). Complete except for building. Includes $16,000.00
11309 controls, nine 6' diameter fans, 30 HP motor, heating coils, 8 ventilators, 4 aluminum doors and carriers, ceiling baffles, piping, steam traps,

electrical controls.

Georgia 17292 SII Dry Kiln Lumber or Firewood Kiln Building: Aluminum/ Stainless Dimensions: 38’ wide X 24’ depth X 18’ height (absolute clearance) $130,000.00
Holding Capacity: 42 Cords of Firewood or 50,000 board feet Fan System: 7 fans that are 48’’ diameter at 5 horse power Heating System:
Natural Gas or Propane ; 3,500,000 BTU Burner ; Max operating temperature is 190F Electric Vent System: Eight 24’’X24” aluminum vents
Electrical Requirements: 480 voltage; 3 phase Control Room: 12’ X 6’ (can make larger if desired) Motor Control Center/ Frequency Drive:
One MCC for overload protection on each motor, reversing capability, and etc. Computerized Control System: Dell Computer; Programmable
logic controller (with all appropriate equipment); 3 core temperature probs ( RTDs); Wet Bulb; Software will control Dry Bulb/ Wet Bulb, Heat
Treat step, heat and fans; Web Caller for sending alerts via text or email MISC: 1 spare 5 horse power fan motor Kiln is in excellent condition
with only about 55 charges.

Michigan Complete components for 2 - 40,000 bf kiln. Good condition, Includes controls, fans, compressors, brackets, hangers, ceiling baffles, electrical $25,000.00
16453 panels, piping, and doors. Has everything but the boiler. Also has automatic reversing fans. Ready to load and go. Seller willing to help

assemble kiln. $25,000.00 each.

Michigan 14148 2006 Northland NK800, aluminum construction, includes tracks and lumber cart, electric heat, single phase 220V. Handles up to 8'6" material. $4,800.00
Over $7,000.00 comparable new.
New York 17098 $57,500.00
New York 16852 RF Power Dry Kiln: Stainless Steel chamber Load size @ 2500 board feet 440 VAC 3 Phase Dries load under Vacuum Has dried 560 3-3/8"x $12,000.00
3-3/8"x 37-1/2" in 3 days to 6 percent moisture content

Wood-Miser VK-2000. 5 blankets. Excellent condition. 220 Single Phase power.

North 10869 Complete set of components for Nyle 25,000 board foot kiln. Only needs chamber. $12,500.00
Carolina

North 10868 Hitachi 8000 board foot dehumidification dry kiln, includes fans, controls, compressor. Needs a new chamber. 10 HP 3 phase power. $6,000.00
Carolina

Ohio 16232 2 Timber Wolf Dry Kilns. 24000 and 40000 bf capacity. Components only. 15 Years old with 12 volt controllers, gas boiler, Fin Tubes, Fans, $8,000.00
Aluminum Doors with Track and Carrier. Reduced

STATE AD # Drying & Treating PRICE
(U.S.)

Michigan 16582 2 Nyle Doors 27 3/4" for door opening of 10'X6". Fin tubing - 200'. 6, 3 phase 24" fans. Kewanee 30 HP low pressure steam boiler for 12000' $16,500.00
kiln.

STATE AD # Edgers, Board PRICE
(U.S.)

Michigan 17359 Miner 3 blade edger, 2 stationary and 1 moveable. 4" X 36". Portable. No power. $3,850.00
New

Michigan 16035 Shop built edger capable of cutting 6" by 36" material. Edger has 2 saws: 1 moveable, & 1 stationary with insert teeth. Top & bottom feed $22,000.00
rolls, fence and saw powered by onboard hydraulic unit. Screw rollers off-feed material onto a conveyer belt (powered by a 1hp. motor) which Reduced
then returns beside operator. Edger also has onboard conveyer feed sawdust blower. Everything on the edger runs off of a single 100hp.
electric motor.

Missouri 17225 2007 Baker Portable Edger model BBE. 26 HP Honda gas engine. 150 hours. Runs daily. 2 blades, 1 fixed - 1 moveable. Capacity 2 1/4" thick X $9,000.00
16" - 18" wide. Has cut 3000-4000 bf a day on 8 quarter
Missouri 16898 $5,000.00
Missouri 16658 Wagler Shop Built Edger. Has 3 blades, 2 stationary and 1 moveable. Is belt powered but has no engine or motor. Does have a pulley on side $8,000.00
for belts which need to be added. Has 8' infeed rolls, not live and has outfeed table. Cuts up to 4" thickness.

Miner 36" 3 Saw Edger with 20 HP electric motor, 4" thick cut, In-feed and out-feed, 4 sets of solid tooth 14" carbide blades

New York 17353 Crosby Edger. Capacity 4" X 32". Runs off PTO. Blades have replaceable teeth. Not portable. $4,500.00
New

Ohio 16676 3 X 36 Reckart Edger Fixed Blade with electric motor and outfeed rolls. $5,500.00

Pennsylvania 16835 Morgan Chain Fed Slab Edger. Electric with 2 20 HP 3 phase motors. 2 blades, both moveable. Capacity 7" thick X 6" wide. $10,000.00

Tennessee 17237 Miner Gang Edger. Capacity 4" thick X 36". No power. $3,500.00
Updated

STATE AD # Edgers, Bull PRICE
(U.S.)

British 6" Bull edger, 36" wide throat, 3 saw, 2 movable, powered by Ford 6 cylinder 4 speed gas engine, edge guide and air assist, 6" depth capacity. $6,900.00
Columbia 13065 6’ x 30" 3 roll edger infeed with fence, powered, 8’ x 30" 6 roll outfeed, powered, extra 3 rollcase infeed assembly. Easy to breakdown and

load.

Illinois 17344 20 tailing belt Commercial Shearing Inc. Mod# S85DC-22-2 SER# Y84-2086 * 150 HP 480 3 ph * air lift hold down rollers * 5 blades lots of $9,900.00
STATE New extra spacers * This unit complete with in feed roller/out feed belt 20' * This edger has just been put thru our shop and is in good working
order. PRICE
(U.S.)
AD # Edgers, Gang

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 10

HOUSTON, TX 77071

Tennessee 17238 Miner Gang Edger. Capacity 4" thick X 36". $3,500.00
Updated

Wisconsin 13556 Meadows gang edger, set up with 4 insert tooth saws, infeed and outfeed tables, 40 HP 3-phase power. $5,000.00
STATE PRICE
Alaska AD # Edgers, Vertical (U.S.)
Wyoming
14567 Renco 2-saw 6" vertical edger, no power. $3,500.00
16097
Renco vertical edger with a 40 HP 3 phase electric motor. Comes complete ready to install with controls, starter and figure board. In very $5,500.00
good condition.

STATE AD # Extensions PRICE
(U.S.)

Oregon 16496 Rail Package includes 2 standard rails with 2 adjustable end stands, 1 standard rail cut incase you just need a 10 foot extension, and 2 side $2,300.00
supports to stabilize added length.

Vermont 14365 Pre-1986 Wood-Mizer 12' track extension, designed to attach to Wood-Mizer LT30 and LT40 series sawmills produced between 1982 through $550.00
1985, Needs some work.

STATE AD # Feedworks PRICE
(U.S.)

South 16172 Wichita Air Tube Disc Clutch, 50 HP Motor, Carriage Drive $2,750.00
Carolina

South 16173 Salem Carriage Drive, 208 5059. Never installed. Never Used. $3,000.00
Carolina

STATE AD # Feller Buncher PRICE
(U.S.)

Illinois 17345 2002 670 Hydro Ax, SER# SA14862 SER#7879, Model # 22HICap cutting head, Eng Serial # RG6081A142613, 6081AFOO1 $59,950.00
New

Texas 16986 611B2 Hydro-Ax Shear with Koehring 21" sawhead. 1988 or 1989. Has shear head and fork attachments. Haas 1 new tire and other 3 at 50%. $12,000.00
STATE Runs well.
Georgia PRICE
AD # Filing Room Equipment (U.S.)

16345 Workshop Tools: Gardener chipper knife grinder, Sharp-All circle saw grinder with grinding rocks, Bush hog grinder, Ronx Add-a-Phase $2,000.00
(copper), 30 galleon air compressor. Will separate.

New York 17177 Dexter file guide adjustable for any size circle saw. A little rusty but everything is free and workable. $100.00

South 16794 Lenox strain gauge $170.00
Carolina

STATE AD # Firewood Processors PRICE
(U.S.)

Iowa Two firewood vending machines in 20' shipping containers, designed to sell 3/4 cu. foot bundles in campgrounds for $5.00 each ($850.00 per $12,000.00
10841 cord). The larger machine will vend from up to 96 bundles of wood without needing a refill, and the smaller machine will vend up to 60

bundles without needing a refill. Asking $7,500.00 for the larger machine and $6,500.00 for the smaller machine or $12,000.00 for both.

Iowa 2007 Timber Wolf TW-6 log splitter with both log lift and table grate options, 4-way and 6-way splitter heads, 5" cylinder, 3 1/2" push rod, $7,999.00
14695 hydraulic controls and hydraulic tank, 28 ton splitting capacity, 8-second cycle time, 18 HP Honda gas engine, handles up to 24" maximum Reduced

length. Original owner. Kept inside. Only produced 15 cords a year or so.

Texas 15161 2008 MultiTek Model 2020CSC firewood processor with Multitek 30' firewood elevator (2011), on factory axle, enclosed cab with heat, new $52,500.00
tires all the way around, ready to haul by one-ton dualie. Designed to handle crooked logs and for production averaging 2.5 cords per hour.
Includes chain saw bar bucking saw, 4-way splitter and brand new 6-way splitter, and tandem hydraulic pump which allows operator to buck
and split at the same time. 1600 hours. Equipment $115,000.00 comparable new. Will deliver for fuel cost and expenses.

Wyoming 16201 CordKing Model 60 Firewood Processor. Year 2000. 110 HP Turbo John Deere Engine. 5545 hours. Well maintained. Price Firm. $70,000.00
STATE
AD # Flooring Manufacturing PRICE
(U.S.)

Wisconsin 16483 Linear End Profiler - End matcher. Has 12 V battery for sensors. Cutter heads are belt driven. Has air cylinders for hold downs. Amish Ready. $42,000.00
Wisconsin 16482 Custom Built End Matcher. Line shaft ready. $12,000.00
Wisconsin 16481 Doucet EM-S End Matcher. Line shaft ready. $26,000.00

STATE AD # Forestry Winch PRICE
(U.S.)

South 10441 Carco/Paccar G80 hydraulic winch, 1" cable, can fit on D-7 or D-8 Cat, more. Over $50,000 new. $10,000.00
Carolina Reduced

STATE AD # Forklifts PRICE
(U.S.)

Alabama 17168 Windham W8 Forklift. Parts only! $800.00

Alabama 16933 Power Lift Rough Terrain Forklift. 12000 lb. lift capacity. Has Perkins diesel engine. Mfg between 1973-75. $5,500.00
Reduced

Kentucky 17154 586 E Construction King Case Forklift. New Air Tires. Still has good paint and cab. 3 ton capacity. Good condition. $22,500.00
Reduced

Kentucky 17155 Forkllift Mast. 3 stage heavy duty VH001417. Has 4' forks and tilt cylinders. Size when completely down is 27" X 45". Good condition. 8000 lb $1,000.00
capacity. Reduced

Kentucky 16822 Clark CMP 35 Forklift. 8000# Capacity. Good condition. $10,000.00

Kentucky 16042 1996 Komatsu Forklift, 6000# capacity, pneumatic tires, propane engine, 2 WD $8,500.00
Michigan 15962 Forklift - Allis Chalmers 500 gas. Engine rebuilt and has 600 hours. $8,000.00
Minnesota 14127 Ford 600 forklift, 4 cylinder gas with sideshift, 4000 lb. capacity. $4,000.00

Missouri 16799 Yale Forklift with 1959 Dodge Flathead 6 engine. 6000 # capacity. Has 6' fork extensions. $4,000.00

Ohio 16995 1982 Hyster P60 Rough Terrain Forklift with 2 WD and gas engine completely rebuilt. $9,000.00

Pennsylvania 15618 1996 Ingersoll Rand 6000-8000 lb. rough terrain forklift, 3003 hours $16,500.00
Reduced

Pennsylvania 16994 1982 Hyster P60 Rough Terrain Forklift with 2 WD and gas engine completely rebuilt. $9,000.00

Texas 17042 611B2 Hydro-Ax Shear with Koehring 21" sawhead. 1988 or 1989. Has shear head and fork attachments. Haas 1 new tire and other 3 at 50%. $12,000.00
Runs well.

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE





TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 13

HOUSTON, TX 77071

Michigan 16419 John Deere 555A Dozier: Forks only, Inframe rebuild 440 hrs ago, new front idlers and top rollers, just rebuilt left final drive, new water pump, $10,000.00
just rebuilt hyd pump and trans pump, needs new turbo

Michigan 16722 1987 John Deere Track Loader model 555A. Approx 8500 hours. Includes winch, bucket, forks. $15,000.00

Ohio 17171 John Deere Track Crawler/Loader with winch. Winch is in working condition. Under carriage is 90%. 75 hours on rebuilt motor. Includes forks, $15,000.00
16022 buckets, bale sphere. Has steel tracks.
Ohio AD # $34,000.00
Rayco C 85 L 2002 steel track crawler/loader. 1011 Deutz diesel engine approx 1000 hrs. Has bucket, forks, and counter weights. Full cab PRICE
STATE 13470 with heat. 40 gallon hi flow hydraulic system. (U.S.)

British Loaders, Wheel $45,000.00
Columbia
1993 Kaldnes SL9000 short log handler/log stacker, 360-degree grapple, 3406 Cat diesel engine, 45,000 lb. capacity. Around 20,000 hours.
Engine and major components rebuilt. Not used heavily since rebuild. Good condition. Can demonstrate. Approximately 140,000 lb. shipping
weight. Can be disassembled for shipping.

Illinois 16811 Fiat-Allis 345 B with Forks and Bucket $7,500.00

Illinois 16283 Timberjack Wheel Loader 1500 with Cummins 5.9 diesel engine. Lifts 1600' lumber. Used daily. $13,500.00

Illinois 16248 CAT IT18B Wheel Loader. Includes 'Quick Attach', Buckets, and Forks. Approx. 15000 hours. Tires in Fair Condition. $32,000.00

Mississippi 16335 Clark 85 Bigwheel Loader with bucket that are 6'9". Brakes need work. Bucket with opening of 48" X 94". Does not include forks. $5,000.00
Reduced

Missouri 17286 1977 Cat Wheel Loader 910. Rebuilt 3204 engine with approx 250 hours. Brakes are good, new master cylinder, transmission is strong, 3 $12,500.00
speed power shift. Has big bucket and 1 set of forks. Lights work.

Missouri 16659 Catepillar 910 Wheel Loaders (3) with 2 sets of forks and 2 buckets. Quantity 3. 1 of the Loaders is for parts only. Loader with cab is $36,000.00
$17,500.00.. Loader without cab is $12,500.00.

New York 16071 1975 Soderham Forwarder 353, Prentice 500 log loader, 353 Detroit diesel. Motivated seller. $10,000.00
Reduced

Ohio 15965 Waldon wheel loader with < 330 hours, tires fairly new, 15000 lbs lifting capacity, diesel engine with turbo, includes bucket and forks $18,000.00
Reduced
Ohio 16442 Pay Loader. International Hough H30 with 4 wheel drive, bucket, forks, bidirectional 3 speed power shift and transmission.
South 16181 $10,000.00
Carolina John Deere 544C Loader Forrest Package, L28 Skidder Tires. Comes with Forks with Clamp, Blade, Bucket, 26" Roanoke Directional Sheer,
and Roanoke Buncher. $23,500.00

STATE AD # Log Decks PRICE
(U.S.)

Illinois 16026 30' Log Deck (stationary), 2 strand, 32" center to center. Comes with either Hydraulic power or 3 phase electric power unit. Good condition. $3,500.00

Missouri 17182 Live Log Deck, 2 Strand, 21', Stop and Load, Hydraulic drive and controls. Good condition. $3,000.00

Missouri 16657 Jackson 18' 2 strand Log Deck with Stop & Load $2,500.00

Pennsylvania 17216 Log Deck. No power. 3 Strand, 10' wide x 35' long. $4,000.00

Virginia 16277 22 ft 3 strand log deck with drive no power $3,000.00

STATE AD # Log Home Manufacturing PRICE
(U.S.)

Alabama Complete Log Mill. Includes conveyors (loading and unloading), all electrical starter motors (without the main breaker). Air compressor $30,000.00
16488 recently taken out of service. The mill comes with 30-40 sets of detailed blue prints. It cuts an 8" log half round D shaped in and out, debarks Reduced
STATE
New York and cuts groves all in 1 motion. The mill will take logs 10-12-14 foot long. The motor is a 150 HP electric. Mill in good condition. PRICE
(U.S.)
STATE AD # Log Lathes
$13,000.00
17100 Victor CNC Lathe: Model # 1860DCL, Serial # FK18620/2, 220 VAC 3 Phase, 10 hp Motor. Accepts: common M codes, Spindle controlled by
an inverter drive, Speed controlled by CNC PRICE
(U.S.)
AD # Log Merchandizing

Illinois 17309 Morgan Log Merchandizing System used to cut 6 x 6 for mining industry. Mfg approx 1998. Capacity is 24' diameter X any length. 50 HP 480 $14,500.00
3 phase saw drive and 10 HP 3 phase hydraulic drive. Hydraulic powered, chain indeed. Very nice and clean.

STATE AD # Log Splitters PRICE
(U.S.)

Ontario 17059 Woodsplitter with 12 HP Honda GX series engine. 22 GPM 2 stage hydraulic pump. 4" X 24 splitter cylinder. 6.5 full stroke cycle time. 6 way $8,500.00
hydraulically adjusted splitter wedge. Cable grate. Log lift. Full auto cycle. Towable on both ends.

STATE AD # Log Turners PRICE
(U.S.)

Missouri 17183 Mellot #5 Chain Log Turner with controls. $2,000.00

Missouri 16655 Mellott #5 Log Turner and controls $2,000.00

STATE AD # Lumber Finishing PRICE
(U.S.)

Texas 16973 Logosol PK1500 Stack Cutter with Chain Saw E5000. 220 V - 3 HP. Excellent condition. Like new. $7,500.00
Reduced
STATE AD # Lumber Stackers
Indiana 15921 Two rotating stacking racks. Milling Machine PRICE
STATE AD # (U.S.)

$3,500.00

PRICE
(U.S.)

Pennsylvania 16869 Milling Machine made by Moore Tools. Has 10" X 16" table. Mint condition. $1,200.00

STATE AD # Mortisers/Drill Presses PRICE
(U.S.)

Pennsylvania 16867 Square chisel mortising machine with oscillating head. Includes lots of 1/4", 3/8", 1/2" and 3/4" chisels and bits. Nice machine and in working $1,000.00
condition.

Pennsylvania Tenon Machine made by L-Power and Co, Philadelphia, AP. Also a Mortise machine made by Heath Machine in Montrose, PA. Both machines $1,800.00
16151 sold by Briggs machinery in Pittsburgh, PA. Both machines are heavy cast iron and rein fair shape. Outfit would work to make wooden

windows or panel doors.

STATE AD # Moulders PRICE
(U.S.)

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 14

HOUSTON, TX 77071

Kentucky 16224 SCMI Superset 23, Year 1999. 5 Head Moulder. 5 X 9. Converted to line shaft by Hoover Repair. Excellent condition. $29,000.00

Louisiana 14865 2009 Logosol PH-260 4-sided moulder, 3-phase power, chip extractor, extended tables, moulding knives and tongue & groove knives included. $11,250.00
Original owner. 10 hours.

Maryland 16642 Stetson Ross Moulder. Cuts 4" tall x 6" wide. Has some tooling. Has 4 heads with 4 motors = 28 HP electric 3 phase for 230 v or 440 v. Top $5,500.00
motor = 7.5 HP, bottom motor = 7.5 HP, side heads share a 7.5 HP motor. Feed is 5 HP. Good running condition. Has 4 standard knife heads.
Michigan 14550 $6,950.00
Minnesota 13061 Bridgewood 2" x 6" 4-head moulder, lineshaft ready. Includes extra heads and knives for tongue & groove, crown moulding, dowels, and a few $2,250.00
other applications. Also includes Jet 4-bag sawdust collector.

Smithway XL 2"x4" 4-sided moulder, two 5 HP 3-phase motors.

New York 16902 Hermance 8 X 12 - 4 sided moulder. Model #50. Ball bearings on heads. Lineshaft ready. Includes hundreds of knives and profiles. Excellent $8,000.00
condition.

New York 16903 CKM 3 X 14 Moulder with corrugated heads and some knives. All belt driven. Lineshaft ready. $5,600.00

New York 17099 LeaderMac Moulder: Model # LMC-523C Serial # 886087 220 Volts AC 3 Phase 5 Cutting Heads 2) 10Hp Cutters Heads 3) 7Hp Cutter Heads $15,000.00
1) 3Hp Feed Motor

Ohio 16980 4 sided Moulder with all Babbit Bearings. 6" X 10". V Belt Drife. Has flat belts for cutter heads and feed rolls. Mfg by JA Faye & Egan Co. $1,600.00
Made in Cincinnati OH. Fair condition. Westinghouse 3 phase electric motor with 25HP, 220/440 V.

Oklahoma 16953 2005 6 head Moulder with 3 phase 480 V power. Mfg by Silver mfg, Capacity is 6" - 9.5". $15,000.00
Reduced

Oklahoma 16952 2008 6 head Moulder with 3 phase 480 V power. Mfg by Silver, model 6023AH. Capacity is 6" - 9.5". $15,000.00
Reduced

Oregon 16762 1981 Weinig Moulder. Capacity 5" X 9". Has chain stacker and chain end feed. 480 v, 3 phase. $40,000.00

Quebec 9421 Yates American C-4, 4" x 8" capacity, 600 volts, 2 x 7.5HP on top and bottom + 2 x 5HP on each side, direct drive, variable speed, all on $6,850.00
bearings, 100 % rebuilt. Like new. Reduced

Tennessee 17242 Newman 48 4 sided Moulder/Planer $6,500.00
Wisconsin 16668
2006 Logosol PH260 4 sided planer/moulder with a selection of patterned knives. Set up for line shaft. Good condition. Also a SH 230 $8,800.00
Wisconsin Soloplaner.
$7,500.00
15650 Logosol-PH260, includes setting rule, setting block, and $2,000.00 in tooling. No power. Lineshaft ready. Reduced

STATE AD # Mulch Manufacturing/Coloring PRICE
(U.S.)

New York 15090 Color Critter attachment for Bandit Beast grinder, includes digital readout monitor and controls. $18,000.00 comparable new. $3,500.00

STATE AD # Package Saws PRICE
(U.S.)

Michigan 14171 2 Holtec 7 foot bars, 1 is brand new and runs 063 chain, and the other is used and includes 2 carbide chains. $1,000.00

STATE AD # Pallet Manufacturing PRICE
(U.S.)

Arkansas 17276 Complete Pallet Manufacturing Set up: 2014 Baker DP Dominator Band Sawmill. Fully Hydraulic with hydraulic power unit. 50 HP 3 phase $90,000.00
electric motor. Low hours. Kept inside. Capacity is 20' X 32", 7000 bf per day with 3 operators. Includes Debarker, Drag Back, Belt conveyor.
Band size is 20' X 1 1/2". 2014 Baker 3 Blade Edger with 2 fixed blades and 1 moveable. Stationary, 25 HP 3 phase electric motor. Capacity 2"
thick X 20" wide. Morgan 2 Head Resaw with 20 HP 3 phase electric motor on each head. Cuts 8" wide by any thickness. All Hydraulic feed
with belt return. Hurricane Chop Saw with conveyors on each end. 7 1/2 HP 3 phase electric motor. Largest model. Hermance Gang Rib Model
GS300. Includes 2 sets of blades and banding groove dado blades. Morgan single head Pallet Notcher with 10 HP 3 phase electric. Cyclone
Dust Collector with 1 blower and 25 HP 3 phase electric. JTV 930 Forklift with new Perkins 4 cylinder 62 HP engine. Has all terrain tractor
tires. Cooks automatic sharpener and manual setter. Wood-Miser 12' Log Deck that feeds to sawmill. Includes all electrical components.

Arkansas 16591 Complete Pallet Cutstock Operation: Hydraulic Swing Chop Saw - custom built in Tipton Mo. > 10" blade, in feed/out feed rollers, hydraulic $35,000.00
swing from top. Includes extra blade. Run by same hydraulic power pack that runs green chain. Green chain, 2 stand with center support,
approx 15' L X 8' W with hydraulic power pack that runs the chop saw and green chain. Hydraulic power pack is 5 HP, 3 phase motor and can
be wired for 240/480. 2 Double Head Resaws - they work together as a 4 head resaw. Has return. Capacity is 6" wide by any length. Each head
has a 20 HP phase motor to = total of 80 HP. Hydraulic power pack is 5 HP, 3 phase motor. Double Head Notcher with Unscrambler. The
heads are moveable. Includes 2 - 20 HP 3 phase motors. This was custom built by Practical Products. Blower System with 40 HP 3 phase
motor. Approx 125' steel piping in sections, 18" dia and approx. 60' out feed pipe at 18" dia. Round Table, 10' dia with 3/4 HP single phase
motor. Radial Arm Saw with 3 HP 3 phase motor. Has thick blade and is used as a banding strip notcher. Deduster, inline with approx 6"
brushes. Has 3 brushes - 2 on top and 1 bottom. All motors include starter boxes/electrical boxes/control boxes.

Illinois 17312 Morgan Scragg Mill. Mfg approx 1998. 2 - 30" blades, 3 phase 50 HP power with 208/320/480. Hydraulic feed with return. Morgan Log $34,500.00
Merchandizing System used to cut 6 x 6 for mining industry. Mfg approx 1998. Capacity is 24' diameter X any length. 50 HP 480 3 phase saw
drive and 10 HP 3 phase hydraulic drive. Hydraulic powered, chain indeed. Very nice and clean. Hydraulic hourglass roller sorting deck for log
merchandizing system.

Ohio 11233 1996 GBN Explorer complete with stacker. Always in a building. Can see running. Capable of producing 1000 pallets daily with 3 operators. $79,500.00
STATE Original owner.
Michigan PRICE
AD # Pallet, Dedusters (U.S.)

17278 Go Fast Deduster with wire and poly brushes. Needs Hydraulic motor. Good condition. $4,450.00
Updated

New York 16826 Baker Deduster. Model BD-D. Includes electric panels, Electric motor, 480 volts. Good condition. $3,650.00

STATE AD # Pallet, Dismantlers PRICE
(U.S.)

Minnesota 17212 Rotoshear Pallet Dismantler. No power. Reasonable offers considered. $1,650.00

STATE AD # Pallet, Nailers PRICE
(U.S.)

Indiana 17257 Woodpecker nailing machine. It has 4 stringer capability. Machine is in current operation. Potential buyers welcome to come and see. $62,500.00

STATE AD # Pallet, Notchers PRICE
(U.S.)

Kentucky 17139 Hazelthorne Double Head Pallet Notcher. No power. Lineshaft ready. Can be set up for electric or lineshaft. Includes Banding Groove $7,000.00
Updated Attachment. Reduced

Michigan 17192 Pallet Notcher with 8' capacity, 3 runners per cycle, includes 3 phase motor. Was run off line shaft. $5,800.00
STATE
Oklahoma AD # Panel Saw PRICE
(U.S.)
16963 Vertical Striebig Compact Panel Saw
$3,850.00

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE





TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 17

HOUSTON, TX 77071

STATE AD # Power Units, Gasoline PRICE
(U.S.)

Illinois 15303 Wisconsin VH4D 4-cylinder, air cooled gasoline engine, 30 HP at 2800 RPM. $1,800.00

Michigan 17019 Allis Chalmers 4 cylinder air cooled gas power unit. 51 HP. No clutch. Can be converted to crank start. $750.00
Michigan 16473 Wisconsin 4 cyl air cooled gas engine. Includes hydraulic pump. $1,000.00
Missouri 16859 Caterpillar 96 HP Power Unit - Complete $1,500.00

STATE AD # Power Units, Generators/Gensets PRICE
(U.S.)

Colorado 17046 Onan 100 KW Genset. Natural gas or propane. @ 1100 hours. 3 phase electric, brake disconnect, low oil sensor, radiator heat shut off. Can $7,500.00
add auto start. Includes enclosure.

Connecticut 12162 85 KW Mitsubishi genset, 100 gal fuel tank. $7,500.00

Illinois 15865 Genset generator take out. Run 500 hours. Model #50DGCH $1,500.00

Kentucky 17006 3 cyl Perkins 10 KW Diesel Generator with sound enclosure. Wired for 3 phase. Can be wired for single phase. Like NEW! 30 hours. $5,500.00

Kentucky 15734 150 KW genset, mounted in enclosed box on tandem axle trailer, 471 Detroit diesel engine. New battery. Only used as backup generator at a $10,000.00
pump station. Second genset available separately.

Michigan 16600 200 kw Genset with new panel and Cummins diesel motor. Clean and low hours. $12,000.00

Michigan 16057 Genset 5,365 hrs - John Deere D4045 165 HP Power Tech 4.5 liter engine with 100 kw Weg generator wired for 480v 3 phase comes with $6,600.00
disconnect. Good condition

Missouri 13713 250 KVA 3-phase genset, 480V, Cat 400 HP diesel engine. $14,000.00
14385 $65,000.00
New 15575 1999 Cat 500 KW genset with Cat 3412 8-cylinder 800 HP diesel engine, 480 volt. Only 125 original hrs on the unit. Perfect condition. Tested. $25,000.00
Hampshire $120,000.00 new. Standby switch gear available separately.

New York 400 KW John Deere Genset, 7100 hours, 1500 hours on total rebuild.

New York 16098 Falcon Power Generator with 15 HP Lombardini Diesel, 8000 watts $2,200.00

Ohio 16512 100 KW Delco Generator, 6-71. Diesel. $4,900.00
Reduced

Ohio 16899 15 kw 120/240 volt Generator Heads - Beltdrive. $1,000.00

Ohio 16679 15 kw Onan Natural Gas Genset $2,000.00

Ohio 16678 25 kw PTO Generator Win Power Model 25/15 PT3J $1,500.00

Quebec 16451 Amada Diesel powered generator 8KW Freshly serviced by licensed mechanic $3,500.00

Virginia 17358 AC synchronous motor. "Georgia Generator". Mfg in 2011. KVE is 65. 1800 RPM. Has Direct Drive bolt on generator. $1,500.00
New

Virginia 17262 200 kva Genset with Onan Generator and 6 cyl. Allis Chalmers Diesel engine. Skid mounted. 1004 hours. 325 HP. Runs well. Has automatic $12,000.00
start and stop with power failure/restart

Virginia 16253 400 kw spectrum generator with 635 HP detroit 60 series engine. has little over 7,000 hours. in excellent condition with 500 gal fuel tank. Also $25,000.00
AD # has 1000 amp breaker in enclosure never used. Reduced
STATE 15374
British Power Units, Hydraulic PRICE
Columbia (U.S.)
24, 5 HP hydraulic motors with speed controllers, 1" shaft, includes 1/4 mile of 3/8" hydraulic hose of variable lengths. Everything brand new.
Will sell motors in lots of 5 for $1,000.00 firm per lot or $12,500.00 for everything. $10,500.00
Reduced

Michigan 16526 140 gal hydraulic tank with Vickers hydraulic pump. 3 phase power. 1 1/2" outlets. $1,000.00

Ontario 15476 50 HP hydraulic power pack 550V $8,000.00

Tennessee 15163 1987 International/Navistar DT-466, 150 HP, cranks and runs fine, includes inline injection pump, Detroit-Allison 5-speed automatic $1,600.00
transmission with radiator and starter. Reduced

Wisconsin 17072 Hydraulic power skid with 800 gal resevoir, multiple open centered pumps, 1 closed center pump. quincy air compressor, lots of steel piping, $16,000.00
also extra motors.

STATE AD # Radial Arm Saws PRICE
(U.S.)

British 13074 Dewalt industrial radial arm saw, length gauge stops guide. $900.00
Columbia

New Jersey 16402 14" Delta Radial Arm Saw with 5 HP, 3 phase electric. Mfg in 1998-99. Has been is storage past 7 years but did work well when last used. $2,600.00

Ohio 17204 Dewalt Radial Arm Saw with 16" blade, 26" X 8 1/2" table. Line shaft ready. Has electric motors but not in use with motors. $2,000.00
STATE
New York AD # Resaws, Components PRICE
STATE (U.S.)
17074 Resaw Attachment - Cooks 8". Has return and Hydraulics.
$2,500.00
AD # Resaws, Four Head & Larger
PRICE
(U.S.)

Colorado 16732 2012 Baker 6-Head Resaw. All Hydraulic / Electric Power - 30 HP Electric Motors (Larger than normal). 12” Wide Cutting Capacity. Top-Down $55,000.00
Powered Rollers. Digital “Set” that measures the height of each blade. Drip-System w/ brass hose and needle-jets. 16’ Baker “Speed Up” Reduced
Conveyor. 50’ of Nord-Fab Dust Pipe that links to each of the 6 heads. Some spare parts & blades. Owner’s Manual. Mint Condition. Only 442
hours.

Indiana 17254 Morgan 4 Head Resaw. In daily operation until 6/9/2016. $27,900.00

Missouri 16807 4 head Morgan resaw with powered top rollers $29,500.00

Missouri 16752 4 Head Walling Resaw, Complete runaround. Hydraulic feed and air tightners. Complete lineshaft hook-up with clutch. $20,000.00
Reduced

STATE AD # Resaws, Runaround PRICE
(U.S.)

Michigan Fast Line Gator 204 Resaw with runaround, cuts 14" - 14" cants. Runaround will cut up to 16' stock. Includes a 6 cylinder Cummins with $30,000.00
16554 Rockford clutch, hooked to power pack and pumps 66 gpm. Hooked up with lineshaft but also has electric motor. Set up behind portable mill Reduced

with rollers behind band mil which go to an unscrambler and then to runaround. 24' green chain included.

STATE AD # Resaws, Single Head PRICE
(U.S.)

Arkansas 11298 5' Prescott resaw, 2 extra 10" bands. No power. $10,000.00

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 18

HOUSTON, TX 77071

British 8513 2002 Polvsen 20"x20"" single head band resaw with complete runaround, 28" x 3" thick steel wheels, runs 1 ½" to 3" blades, 25HP 3-phase, $35,000.00
Columbia hydraulic setworks, potentiometer, 24" x 16’ friction in feed belt with variable speed control, weighted hold down wheels for the in feed & out
feed, resaws down to 1/8" thickness. Includes high capacity resaw transfer system: In feed deck assembly consists of 16’ x 16’ x 8’ 3-strand
hydraulic infeed deck,5’ x 20’ steel walkway, 36" x 4 roller arm belt/lifting transfer,14" x 24’ speed belt trough,24’ roller in feed. Outfeed
consists of 5' x 10' 6 roller outfeed table. Belted return trough, 16" x 35’. Air kickers within roller case for returning material, landing table for
infeed. Easy to breakdown and load.

British Custom built horizontal/vertical 8"x12" twin band resaw, purchased brand new and never run, designed to run one vertical and one horizontal $13,000.00
Columbia 15371 band in tandem for resawing cants into specialty products, 8" live infeed belt with side-press rollers and side belt, 24" bandwheels, set up for Reduced

3" bands, two 25 HP 3-phase motors 550V on the bands, 10 HP hydraulic power pack.

Kentucky 17013 Keystone Single Head Resaw. No power. Capacity is 18" wide X 12" thick. Has hydraulic hold down, head moves up and down, 36" steel $11,500.00
Kentucky 17088 wheels. Reduced
Michigan 17277
2004 Baker Single Head Resaw with complete run around system. 65 HP Deutz Diesel Engine. 12" X 12" Capacity. Runs daily. $33,000.00
Reduced
Smith Single Head Resaw. Low profile. Has return. No power. Includes 6 bands. Band length 13'2". Band width 1-1 1/2". In feed length 48+".
Width 6", Outfeed length 50+". Max/min cutting length is 30-48+". Max/Min diameter is 6x11. Variable speed feed. Engine or mineshaft ready. $4,000.00

Michigan 17227 Kent Resaw with 12" capacity. Line shaft driven. $4,000.00

Michigan 17138 2002 Morgan Single Head Resaw set up on lineshaft and running daily. Includes new feed and return belts. Has 8" return belt. Power: $7,500.00
lineshaft or gas. Has all components to setup for gas. For $1300, will set up with new 26HP Honda gas engine. Band length is 13'2". Band
width is 1 1/4". Outfeed length is 72". Width is 6". Max/Min cutting length is 18" -72". Max/Min diameter is 6" X 8". Available with 5 days
notice. Very good condition. Price firm.

New York 16894 Custom Built Single Head Resaw with complete runaround. Line shaft ready. 8'6" width X 24' Long. Capacity 12" X 12" X 16'. 'Amish Ready'. $15,000.00

Ohio 17335 Morgan single head resaw with return. This is a low hour machine in good condition. It is 230 volt 3 phase. Has all electrical components $5,950.00
New including foot switch. It is equipped with hydraulic band tensioner. New bands and owners manual included. This machine is ready to be
hooked up.

Pennsylvania 17267 Single Head resew with 6" band. Upright. Obrabiarek. No power. Capacity is 24" width. 48" wheels. Good condition. $7,000.00

Pennsylvania 16880 Vertical Resaw: COT Linebar Resaw. Fully equipped and ready to work! Includes all hydraulic units, motors, and electrical components. 3 $80,000.00
phase electric power. Has 10" bands and 6' solid wheels. Complete runaround. About 11 extra bands. Can produce 100,000 bf per day.

Pennsylvania 16760 Lumber Tiger Resaw. Capacity 9" X 12". 36" wheels. Live belt chain hold down. Has return. Low hours. Lumber Tiger Chop Saw with live rolls. $20,000.00

Tennessee 17241 Smith Single Head Manual Resaw. 3 phase electric. Has manual return. Includes 2 sizes of shingle or wedge belts. Approx 50 new blades. $4,500.00
Updated Capacity 8" X 12". Reduced

Texas 7554 Customized high production resaw, air over hydraulic, modular, precision machined, 20 HP 3-phase w/soft starts. Handles 9"x17" cants. Cuts $8,500.00
STATE down to 3/4". Includes 36" band wheels, 7 feed rollers, 3 top-mounted hold down pressure rollers, and all electrical.
Alabama PRICE
AD # Resaws, Two-Head (U.S.)

16735 Diehl 2 Head Resaw. Capacity 1/2" to 1" thick X 4" to 6" wide. Includes extra blades and 10' conveyor metal table. 3 phase motor. $3,300.00
Reduced

Iowa 17188 Kent Double Head Resaw with Return. Lineshaft ready. Will include 5.9 Cummings Diesel at extra cost. Also including 10" blower. Good $17,900.00
condition. Can see in operation.

Ohio 17142 Morgan Double Head Resaw. Lineshaft ready. Capacity 13 or more feet X 6". Band length is 13'2" and width is 1 1/4". Available after May 1, $9,500.00
2016. Reduced

Wisconsin 16791 GoFast 2-head band resaw, two 15 HP 3-phase motors, no return. Has deducting guides, steel wheels and hydraulic powered hold downs. $8,500.00
Reduced

STATE AD # Resaws, Vertical PRICE
(U.S.)

California 3424 1990 Forrestor 900 vertical band resaw, 36" wheels, 4" bands, 3-phase electric, customized linebar, handles 12"x12" cants. No runaround. $5,000.00
(North) Produces 7000 board feet or more daily.

Pennsylvania Robinson Vertical Resaw. 15 HP, 3 phase motor and an additional motor that powers the feed. Feed speeds are adjustable. It is equipped with $3,500.00
17071 Carter Saw Guides. Additional blades and 2 Carbide Tipped Blades are included. It will Resaw widths up to 13". Blades can be run up to 1 1/2"

wide. Good working order and ready to run after it's wired.

Pennsylvania 16879 COT Linebar Resaw. Fully equipped and ready to work! Includes all hydraulic units, motors, and electrical components. 3 phase electric $80,000.00
power. Has 10" bands and 6' solid wheels. Complete runaround. About 11 extra bands.

South 16179 60" Turner Resaw. Good Heavy Wheels, Center Cut, Offset cut, and Tilt Cut. $7,500.00
Carolina
AD # Ripsaws PRICE
STATE (U.S.)
16674 Newman KF 100 Ripsaw Feed System $10,000.00
Ohio 16955 EKSTROM CARLSON Straight Line Rip Saw $3,500.00
Oklahoma

Wisconsin 14697 Marion straight-line ripsaw, good condition, includes infeed chain, lineshaft ready. $3,500.00
Reduced

STATE AD # Roller Beds PRICE
(U.S.)

British 15705 12’ x 26" 5 strand UNHMW live roller deck, includes lifting motor and drive motor. $4,500.00
Columbia

North 16724 Roller Beds. Each section is 10 feet in length. There is 12 inch and 10 inch roller sections. All are in good working condition. Asking $8.00 per $100.00
Carolina foot for 12 inch roller sections and $5.00 per foot for the 10 inch roller sections.

STATE AD # Sand Blaster PRICE
(U.S.)

Pennsylvania 16868 Sand Blaster with 15 gal. pressurized abrasive tank. Dust hood included. Like new, only used for 2 hours $100.00

STATE AD # Sanders PRICE
(U.S.)

Alabama 17111 Casko 36" Sander. Single Belt. 20 HP 3 phase motor. Dust brush attachment. $2,500.00
British $4,500.00
Columbia 13070 Cantek single drum 24" wide belt sander, 1/8"to 5" capacity. $13,500.00
$4,500.00
Montana 17248 TimeSavers Planer/Sander. 36" wide. 1st head is a helical head planer and the 2nd head is an articulating sander. 3 phase machine. Recently
10594 been overhauled.
New York
Solem 32" drum sander, 3 drums, 8000# shipping weight, conveyor, 3-phase power. 4'x6' footprint . Works like a planer but uses abrasives.
Good for finishing sander for furniture, millwork, doors.

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE





TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 21

HOUSTON, TX 77071

STATE AD # Skidders PRICE
(U.S.)

Kentucky 16650 Timberjack 450 C Skidder. New engine in Fall 2014 and approx 130 hours on new engine. 170 HP Cummins. Added new centerpins and brake $31,500.00
seals. Includes grapple and winch.

Ohio 16840 1995 Franklin 170 Grapple Skidder. 6 cyl Cummins engine, rebuilt with 500 hours. Power shift transmission. Front tires are 30 %. Rear tires $22,000.00
are 90 %. Runs good.
Pennsylvania 17293 $8,000.00
Pennsylvania 17164 1980 S8 International Log Skidder with 3 cyl Detroit Engine with approx 100 HP. Has Autoshift, Rebuilt winch, tires in fair condition, has $15,000.00
bullring chains. 6265 hours.

Franklin Cable Skidder model 170. Has Cable Winch, 453 Detroit Diesel. Hydraulics recently rebuilt. Regular maintenance. Good condition.

STATE AD # Slasher Saws PRICE
(U.S.)

Georgia 13450 CSI DL4400 slasher saw, includes new reversible deck. 59" saw bar, plumbed for hydraulics. $9,500.00

Ontario 15477 Slasher saw with cab,seat and joystick controls, all hydraulic hose and fittings for 7 functions, 48" carbide insert tooth saw with swing $5,000.00
mechanism, two log holddowns. No power.

STATE AD # Sorting Deck PRICE
(U.S.)

Illinois 17346 Hydraulic Log deck 20' long x 30" wide, 2 strand for scragg log/ merchandise deck $1,800.00
New

Illinois 17310 Hydraulic hourglass roller sorting deck for log merchandizing system. $5,500.00

STATE AD # Spray Coating PRICE
(U.S.)

Oklahoma 16964 American Spray Coat for varnish $3,850.00
STATE PRICE
AD # Stake Pointers (U.S.)
Florida
Tennessee 17284 Built locally here in Florida, 2 availble Chain driven to place a point on each side of 2x. Can be hopper feed and drop onto a table. Price is per $12,500.00
17243 saw
$3,500.00
Keystone 972 Manual Stake Pointer

STATE AD # Stake Sharpeners PRICE
(U.S.)

Missouri 17331 Manual Pencil Point Sharpener. 5 HP 3 phase electric motor. Capacity is 1/2" - 2", adjustable. Good condition. $1,000.00
New

Missouri 17330 Shop Built Chisel Point Stake Sharpener. Air operated. Set up for 1" - 1 1/2". Can be modified to do 2". Single phase electric 220 V motor. $1,600.00
New

STATE AD # Table Saws PRICE
(U.S.)

Minnesota 15229 Yates table saw, bearings in excellent condition, 18" blade, fine-adjusting capability, 40" wide ripping capacity, 5 HP 3-phase power, handles $950.00
up to 5 1/2" material. 1500 lb. transport weight.

Pennsylvania 16866 Boice Crane Table Saw with solid base and tilting arbor. Has cast iron table with T plots. Table size is 30" X 40". Fair condition. $400.00

STATE AD # Tenoners PRICE
(U.S.)

California 11351 Jenkins Model 90 double end tenoner, handles from 15" to 8' length, 3-phase power, most electrical included. $6,000.00
(North)

Michigan 16455 Greenly tenoner with 5 heads on each side. $11,000.00
Ohio 16598 $11,500.00
Double End Trim Saw Tenoner Machine - Custom built. 11" blades. Cuts up to 82" length X 1 1/2" thick. Line shaft ready. Has capacity for
Ohio 15401 electricity - 3 phase 480 V. with 2 motors. $10,000.00

2004 Dyna SD60 Super Duty single end teneoner with Dyna drill press, produces spindles from 3-1/2" to 6" diameter, drill press adjusts for
angle drilling, lineshaft ready. Original owner.

Pennsylvania Tenon Machine made by L-Power and Co, Philadelphia, AP. Also a Mortise machine made by Heath Machine in Montrose, PA. Both machines $1,800.00
16523 sold by Briggs machinery in Pittsburgh, PA. Both machines are heavy cast iron and rein fair shape. Outfit would work to make wooden

windows or panel doors.

STATE AD # Trailers PRICE
(U.S.)

California 14133 Two 40' chip trailers, one with drop floor and spread axle, one with chip tailgate and sliding rear axles $2,000.00
(North)

Kentucky 16893 2008 Delta tandom axle dual wheel trailer. Gross weight 23,400 lbs. Torque tooth, gooseneck. 4 new tires. 17' flat and 5' dovetail with ramps. $8,500.00
Includes spare tire and tool box.

Michigan 16378 Eby 16' Double Decker Trailer. 6' 8" wide X 7' 8" high. GVWR of 12500 lbs. 7000 lb axels. Split gates indoors. Like new. Tall enough for Draft $12,000.00
Horses.

Missouri 15823 2002 Trailer with these specs: 29,500 lb with 5,900 lb hitch load and load capacity 19,900 lb; Electrical - sealed modular wiring harness with $6,000.00
LED lights; Frame - 12 in. pierced i-beam with 3 in. crossmembers 16 in. on center; Tires - 235/80 R16 LRE (3097lb); 2 in treated wood floors,
adjustable pintle eye - coupler, heavy duty safety chains, 60 in X 24 in. heavy duty flip up ramps with spring assist; deck length - 25 ft flat + 5
ft dovetail; all wheel electric brakes, single 12,000 lb drop foot jack; 2 - 10000lb oil bath axles; toolbox - chain box with lockable lid standard;
slipper springs suspension; finish - primed, 2 coats of automotive grade enamel

Missouri 17040 1994 Redi-Haul Flat Bed Trailer. Has Pintle hitch, 2 - 12,000 lb axles, 8 - 16.5 low profile tires, 20' deck with 5' dove tail, spring loaded ramps, $3,750.00
electric brakes. Needs new floor.

Virginia 17036 1998 Eager Beaver V33, 22 ton trailer. Features: 17 1/2" rims - 215/75/17.5, Tubeless tires at 80%, Dove tail,, Pintle Hook, Air Brakes, Tool $9,000.00
Box on Front Tongue, Deck in excellent condition. 7' tongue, 21' deck, 5' dove = 33' total length.
STATE PRICE
Indiana AD # Transfer Decks (U.S.)
Virginia $16,500.00
16615 Mellott Runaround System with Transfer Deck. 5 motors, 3 phase for 460/480 V. Includes all starters, boxes. $2,500.00
16255 10ft heavy duty 4 strand transfer deck with drive and 5 HP motor

STATE AD # Trim Saws PRICE
(U.S.)

British Twin 16" Hula saw system consisting of 24’ x 12" roll case with stops, length gauge, air kickers, mac valves ,24’ x 16" drop conveyor belt, 6 $12,000.00
Columbia 13067 strand 8’ x 20’ H78 camel back infeed transfer deck, 7.5HP drive with radicon reducer, two 4’ x 8’ x 20" block bins. Easy to breakdown and

load.

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE

TOLL FREE: 800-459-2148 SAWMILL EXCHANGE 9/1/16
WWW.SAWMILLEXCHANGE.COM 8544 West Bellfort PMB 328 PAGE 22

HOUSTON, TX 77071

Louisiana 15241 Morgan 2-saw 20" trimmer, variable speed, 3-phase power. $3,500.00

Ohio 16597 Double End Trim Saw Tenoner Machine - Custom built. 11" blades. Cuts up to 82" length X 1 1/2" thick. Line shaft ready. Has capacity for $11,500.00
electricity - 3 phase 480 V. with 2 motors.

Pennsylvania 17283 2000 Morgan 2 blade Trim Saw with 25 HP Vanguard gas and electric start. Capacity 3" -16" wide. $3,000.00
Pennsylvania 11237 $13,000.00
Pennsylvania 11639 1999 Newman multisaw drop trimmer, completely automated, currently sawing 6"x6" cants, live infeed chain, live slab/sawdust chain, three- $7,000.00
phase motor on each saw position. Operated only for 4 years. Original owner.

Cornell automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.

Pennsylvania 11640 Automatic adjustable 2-saw trimmer, similar to Cornell, 18" blades, 3-phase power with hydraulic power packs. $3,000.00

Virginia 16256 Cornith 2 saw trimer $4,000.00

Wisconsin 14069 Irvington 16' V-line drop-down trim saw, 8 saw units with individual levers, 14" saws, first saw is adjustable, infeed table, outfeed waste $4,250.00
conveyor, 3 HP 3-phase 440V on each saw, separate infeed and outfeed motors. 7200 lbs. shipping weight. Always kept indoors. Reduced

STATE AD # Trucks PRICE
(U.S.)

Georgia 15916 Cabover GMC with good 250 Cummins, 10 speed transmission $1,250.00
Reduced

Georgia 17016 1980 Dual Wheel Big Block, C3 Series. $3,500.00

Pennsylvania 11342 1974 Mack Interstater, 237 motor, 5-speed, 387 Mack rearends, motor completely rebuilt, custom rolled and pleated interior, drive tires are $3,000.00
all new recaps.

Texas 17125 1977 Mack Truck with a D210C Prentice Loader mounted. The truck has 4 new tires on it and the rest are at 75%. Runs well. $12,000.00

Virginia 17030 1987 Ford L-9000 with 10' dump body. Empty weight is 15400 lbs. Gross weight is 40000 lbs. L-10 Cummins diesel engine - very strong. Pintle $8,000.00
tow hook. Starts excellent in any weather and runs good. Tires are 90% front and rear. $2,500.00
Virginia 17032 $5,000.00
West 17347 1982 Mack Truck M5200, Diesel. Empty weight is 11000 lbs, Gross weight is 26000 lbs. Cab over. 16' flat bed - metal. Dump - Fontaine. Works
New good. Rubber is like new but old. Unknown mileage. Engine is Mack Diesel. Needs brake job. 5 speed straight shift transmission. Clear title.
Frankfort, IL
12.7 Detroit Engine, 10 speed transmission, singleline wet kit, & Tandem twin screw.

STATE AD # Truss Manufacturing PRICE
(U.S.)

Oklahoma 8678 Clary Craftmaster Model 310 component saw for truss manufacturing, Serial 310.090044. Includes 4 blades (two 14", one 16", one 28") on $2,000.00
separate arbors and three movement motors, 35' track. All 3-phase. Appears 100% complete, even control box is present. Towing requirement
20' bed or longer.

STATE AD # Unscramblers PRICE
(U.S.)

Wisconsin 13839 Brewer 4-strand board unscrambler, 8' width, 5 HP with gear box and double reducer $2,500.00
Reduced

STATE AD # Vacuum Pump PRICE
(U.S.)

Indiana 15911 2001 40 HP Quincy Vacuum Pump with control panel and cooling radiator with fan, 29,000 hours $4,000.00

STATE AD # Veneer Clippers PRICE
(U.S.)

Oregon 1996 Silver Eagle Model 72/602 veneer clipper, SN W69699, hardly been used, purchased for cutting multiple layers of recycled paper and $2,450.00
15209 didn't work very well. Works very well for veneer as intended. Footprint is 4' wide x 9' long x 106" tall. Includes resharpened 75" long blade Reduced
PRICE
and spare blade, hand tie valves, new air hoses. Tested and ready to go.
(U.S.)
STATE AD # Woodworking Workshop Equipment
$3,000.00
Pennsylvania 17226 Square chisel mortising machine with oscillating head. Includes lots of 1/4", 3/8", 1/2" and 3/4" chisels and bits. Nice machine and in working
condition. HA Swing Saw. #6 with 10" blade. Belt driven and includes electric motor. Milling Machine made by Moore Tools. Has 10" X 16"
table. Mint condition. Dewalt 12" dual bevel slide compound miter saw. Model DWS 780. Set up for flex shaft drive. Flex shaft included. Also
includes original electric motor. Sand Blaster with 15 gal. pressurized abrasive tank. Dust hood included. Like new, only used for 2 hours
Boice Crane Table Saw with solid base and tilting arbor. Has cast iron table with T plots. Table size is 30" X 40". Fair condition.

STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE