Catalog-Rental

Measurement and Test Equipment

Rental Catalog

(817) 465-9494 or (800) 225-7271

www.TechnicalDiagnostic.com



Dear Valued Customer:

We maintain one of the largest inventories of test, measurement, diagnostic, and monitoring equipment in the
country, with equipment from over 125 major manufacturers. We also have maintenance and test
applications experts available by phone to help with your test equipment and test application needs.
TDS offers test equipment and measurement instruments for power and process systems applications on a
short-term rental or long-term lease basis. This is a cost-effective approach to meet short-term demands and
unique test requirements. We feature:

• Protective Relay Test Equipment • Power Analyzers, Monitors, and Recorders
• High Current Test Equipment • Infrared Imagers and Thermometers
• High Voltage Test Equipment • Process Instrumentation Test Equipment
• Power Factor Test Equipment
• Transformer Test Equipment - Pressure
• Precision Measuring Instruments - Temperature
• Dataloggers & Data Acquisition Systems - Flow
• Cable Test Equipment • Telecom & Electronic Test Equipment
• Mechanical Test Equipment • Personal Protective Equipment

We guarantee that we will be below our competitors’ prices for equipment that we have in stock.
We have the best applications support in the industry, available 24 hours per day, 7 days per week.
We offer new and refurbished test equipment for sale. Call or check our website
www.TechnicalDiagnostic.com for equipment specifications and availability.
Remember our commitment to you. If you feel that we haven’t kept these promises to you, if you have a
success story with one of my employees that you would like to share, or if you have any questions, please
don’t hesitate to contact me personally at 817/465-9494.
Sincerely,

John J. Lapicola, P.E.
President

 Guaranteed Lowest Rates – Our rates will be below our
national competitors on equipment we have in stock

 The Equipment you ordered will arrive at the Right Time
 The Equipment you ordered will arrive at the Right Place
 The Equipment you ordered will Function Properly
 The Equipment you ordered will have:

The Right Accessories
The Right Leads
The Right Manual

 The Equipment you ordered will have:
Traceable Calibration (for calibratable units)
Current Calibration Sticker
Current Calibration Certificate

 The Equipment you ordered is backed by our Customer
Support and Application Assistance

To order or for Applications Assistance:

817/465-9494 or 800/225-7271
Email: [email protected]

15825 Trinity Blvd. Fort Worth, TX. 76155

www.TechnicalDiagnostic.com

www.TechnicalDiagnostic.com4 Our Inventory is Updated Continuously – If you don’t see what you need, Call Us!!! 

Table of Contents

Electrical Test Equipment

Switchgear/Hipot, DLROs, Multimeters, High Current Test Sets,
Transformers, TTRs, Power Factor Testers, Protective Relays, Single and
Three Phase Test Sets, Motors and Rotating Equipment, IR Camera,
Underground Cable and Fault Location, All Power Equipment

Instrumentation and Controls Test Equipment

Pressure Calibration/Gauges (Vacuum, Hydraulic, and Pneumatic),
Modules, Transducers and Transmitters, Hand Pumps, RH Calibration,
Resistance Temperature Detectors, Thermocouples, RHs, Dry Block
Calibrators, IR Thermometers, Flow Meters, Differential Pressure,
Portable Multifunction Calibrators, PH/Conductivity, TDS

Recorders/Monitors/Analyzers/Dataloggers
and Data Acquisition Systems

Power Quality Analyzers, Universal Strip Chart, Circle Chart Recorders
includes Pressure, Temperature, Flow, Power Environmental Conditions, etc

Mechanical Test Equipment

Laser Alignment Equipment, Vibration Measurement/Recording and
Analysis, Wobulators, Borescopes

(817) 465 - 9494 [email protected] 5

Electrical Test Equipment Primary Current Injection Megger

Doble Model: CB-832

Model: TDR900 Circuit Breaker Test Set
• Digital memory ammeter
Circuit Breaker Test Set • Digital multirange timer
• Trip (O) • Provides instantaneous currents up to 800
• Close (C)
• Reclose (O-0.3s-C) AMPs through a 225 AMP breaker
• Tripfree (CO) • Solid-state output initiate circuit
• O-CO
• O-0.3s-CO Megger
• First Trip (O)
Model: CB-845
Doble
Circuit Breaker Test Set
Model: TDR9100 • Digital memory ammeter
• Digital multirange timer
Circuit Breaker Test Set • Provides instantaneous currents up to 800
• Verify the control circuit
• Check motion of the moving parts AMPs through a 225 AMP breaker
• Validate time of operation • Solid-state output initiate circuit
• Pinpoint root causes of problems
• Assess circuit breaker overall capability Megger
• Fulfill compliance testing requirements
• Demonstrate results of maintenance Model: DDA-1600

Doble Circuit Breaker Test Set
• Digital signal processing technology
Model: TR3189 • Variable pulse time and firing angle
• output current control
Breaker Timing X-ducer • 16,000 Amps
• Installs in minutes, with no adapters or

modifications
• Provides direct capture of the breaker is

true linear motion
• Designed to ABB factory specifications

Megger Megger

Model: CB-8130 Model: DDA-3000

Circuit Breaker Test Set Circuit Breaker Test Set
• Digital signal processing technology
• Variable pulse time and firing angle • New DDA-1 Digital Data Acquisition
• output current control • High-current output: 60,000 A for Model
• 30,000 Amps
DDA-6000 and 35,000 A for Model DDA-
Megger 3000
• Variable pulse time and firing angle output
Model: CB-8160 current control
• Complies with NEMA AB-4 Test Guidelines
Circuit Breaker Test Set
• Zero DC offset output current for Megger

repeatable, instantaneous trip test results Model: DDA-6000
• Tests breaker sizes up to 6000 amperes at
Circuit Breaker Test Set
up to 60,000 amperes
• For primary injection testing of high voltage
circuit Breakers and Relays

• 60,000 Amps
• Digital Signal processing technology
• Variable pulse time and firing angle output

current control
• Complies with NEMA AB-4 test guidelines

6 www.TechnicalDiagnostic.com

Primary Current Injection (cont’d) Megger Electrical Test Equipment

Megger Model: SPI225

Model: MS-1A Smart Primary Injection Test System
• Up to 2000A output
Overload Relay and Circuit Breaker Test • Smallest primary injection test system in
Test time-current characteristics of motor
overload relays and molded case circuit its class
breakers rated up-to 100 amperes by • First unit on the market to eliminate variac
simulating overloads up-to 300% of their
rating control
• Output current regulation
Megger • Designed for switchgear commissioning,

Model: MS-2 SMC

Overload Relay and Circuit Breaker Test Model: Raptor C-05
• Rugged and lightweight unit - weighs
Primary Injection Testing
only 33lb (15 kg) and is tough enough to • Composed by a Raptor master and a
withstand daily field or plant use
• Capable of testing long-time, short-time and console, the Raptor C-05 is the smallest
instantaneous trip characteristics of circuit fully functional Raptor configuration
breaker current sensing devices • 3800 A/3 KCA
• 7500 A/3 KVA Max. current permanent
Phenix • 9500 A/2 KVA Max. current 3 minutes
• Max. current 3 s Compliance voltage range:
Model: HC-3 1.2 - 0.22 V

Mobile High current Test Set SMC
• Ideal for testing thermal, magnetic and
Model: Raptor C-15
solid-state motor overload relays
• Has a maximum output current rating of Primary Injection Testing
• The Raptor C-15 features the entire
4000 amps
• Features a digital ammeter and timer, which functionality of the C-05 and supplies 8 kVA
power for medium-to-high current injection
displays in both cycles and seconds mode on moderate loads
• 3800 A/3 KCA
Programma • 7500 A/3 KVA Max. current permanent
• 15000 A/2 KVA Max. current 3 minutes
Model: CSU-600AT
SMC
Primary Injection Test Kit
• Current supply up to 600A Model: Raptor C-25
• Can be set up quickly & easily on the built in
Primary Injection Testing
time and analog ampmeter • This configuration is called to be the
• For primary test of protective relays
• Integral timer 0-999.999 favorite for most high current applications
• 220V Input • 3800 A/3 KCA
• 7500 A/3 KVA Max. current permanent
Vanguard • 15000 A/2 KVA Max. current 3 minutes
• Max. current 3 s Compliance voltage range:
Model: CT-7000
4.4- 0.87 V
Digital Circuit Breaker Analyzer
• Qualifying Input: 100-120 Vac or 200- SMC

240 Vac, 50/60Hz. 3,6, or 12 dry-input Model: Raptor C-35
channels, each channel detects main and
insertion-resistor contacts Primary Injection Testing
• All contact inputs are grounded until test; • The Raptor C-35 features the entire
input channels are protected against static
discharge functionality of the C-05 and supplies 18
• Resistor Detection Range: 50-5,000 Ω kVA power for cases where the distance to
the tested object cannot be reduced
(817) 465 - 9494 • 3800 A/ 18.4 KVA Max. current permanent
• 7500 A/28 KVA Max. current 3 minutes
• 15000 A/22 KVA Max. current 3 s
Compliance voltage range: 4.4- 0.87 V

[email protected] 7

Electrical Test Equipment Primary Current Injection (cont’d) Siemens

SMC Model: TS31

Model: Raptor HV Secondary Injection Test Kit
• Used to test the operation of the fault
Primary Injection Testing
The Raptor-HV, also called the high voltage protection functions of the circuit breaker
slave, is an optional product that extends is trip unit
the Raptor is applications to tests that • Includes long-time, short-time,
require the use of a moderately high AC instantaneous, and ground fault by means
voltage. This product can work only in of secondary current injection
combination with a Raptor Master and is
visually similar to it. Siemens

SMC Model: WLTS

Model: Raptor SL Secondary Injection Test Kit
Used to verify the proper operations of
Primary Injection Testing WLTS trip units, energy transformers and
• The slave Raptor pushes an additional 5 current transformers

kVA power from the mains input to the high
current pass-through secondary
• Up to three slaves can be added for up
to 15,000 A with a 18-kVA total injection
power
• The master unit detects the presence of
slaves using infrared communications

Secondary Test Sets

Cutler Hammer

Model: G03

Secondary Injection Test Kit
• Use with DS/DS II or DS/Magnum
• Adaptors to test RMS 510, 610, 810, Digitrip

520 and more

General Electric

Model: TVRMS2

Digital Test Kit
• LCD screen guides users with menu driven

test procedures
• Allows testing without removal of the trip

unit or de-energizing the breaker
• Confirms switch settings on RMS-9 and

EPIC trip units Defeats ground fault for
high-current testing: provides visual
warning before and after ground fault

Siemens

Model: PTS-4

Secondary Injection Test Kit
• Used for testing of the magnetic tripping

actuator as well as the trip unit for Static
Trip III Trip units
• Has convenient 120v outlet plug for
portable use

8 www.TechnicalDiagnostic.com

Secondary Test Sets (cont’d) Megger Electrical Test Equipment

Square D Model: BITE2

Model: S33595 Battery Impedance Tester

Secondary Injection Test Kit • Determines condition of lead-acid and NiCd
cells up to 7000 Ah
• STR22ME, STE22GE, STR22SE,
• On-board Pass/Warning/Fail indications
• STR23SE, STR23SP, STR43M, STR53UP,
STR53UE • Robust, repeatable instrument

• ET 1.0, ET 1.0I, ET 1.0 • On-line testing

• Micrologic 2.0, 3.0, 5.0

• Micrologic 2.0A, 3.0A, 5.0A, 7.0A; 5.0P,
5.0H, 7.0P, 7.0H; 6.0A, 6.0P, 6.0H

Square D Megger

Model: UTS-3 Model: Torkel 840

Secondary Injection Test Kit Battery Load Tester

• Universal Test Set • Batteries can be tested in service
• Includes test module for: full-function and • Unit adjusts to include load currents in the

standard-function LEL, LXL, LXIL, PEF, test parameters
PXF • User adjustable alarm and shutdown points
• Requires modules CBTMB, CBTM4/4A,
LBTM1, CBTM3 to avoid excessive discharge
• Easily expandable for larger battery banks
Battery Testing
using TXL extra load units (option)
Hioki
Megger
Model: 3554
Model: Torkel 860
Battery Tester
Battery Load Tester
• Re-designed circuit for super resistance
to noise • Batteries can be tested in service
• Unit adjusts to include load currents in the
• Stores up to 4800 sets of battery data in
internal memory and manage records on test parameters
your PC • User adjustable alarm and shutdown points

• Auto-hold and auto-store funtions make to avoid excessive discharge
measurement and recording simple and • Easily expandable for larger battery banks
hands free
using TXL extra load units (option)
Megger
Cable Tracers and Locators
Model: 246001
Alcoa Fujikura
Battery Impedance Tester - BITE
Model: FSM-60S
• Ability to test all lead-acid and nickel
cadmium battery cells of less than 2100 Ah Fusion Splicer
capacity
• Rugged construction providing shock, dust
• Ranges: 0-1.999mohm with 1µ ohm and moisture resistance
resolution; 0-19.99mohm with 10µ ohm
resolution • Dual monitor position with automatic image
orientation

• Automatic arc calibration and fiber
identification

• User-selectable fiber clamping method -
sheath clamp or fiber holders

Megger Amprobe

Model: BITE 3 Model: AT-4004CON

Battery Impedance Test Equipment Circuit & Wire Tracer

• Detemines health of lead-acid cells up to • Does not interfere with sensitive electronic
200 Ah. equipment

• On line testing with Pass/Warning/Fail • One universal transmitter-automatically
calculations switches to work with energized or
nonenergized systems
• Measures impedance, interconnection
resistance and cell voltage • Traces live wires burried or hidden behind
walls
• Measures float and ripple currents

(817) 465 - 9494 [email protected] 9

• Test Equipment Rentals & Sales
• Calibration & Repair Services
• Turbine Services

Qualified Staff • Certified Equipment • Exceptional Service

Test Equipment Asset Management Program

Technical Diagnostic Services offers a comprehensive Asset Management Solution that helps you lower
costs and reduce development times. The combination of our TRACKQUIP software, deep expertise in test
asset management, and extensive test equipment data enables you to run your operations efficiently and
effectively.

TRACKQUIP can reduce spending on test equipment & speed your time to market by providing the tools to:

• Increase utilization from <30% to as much as 60%
• Identify and sell/rent excess assets; applying credit to leading edge equipment
• Enable employees to find test assets in seconds vs days, resulting in faster response times to project deadlines

and requirements
• Redirect test equipment spend to leading edge technologies
• Open up and organize warehouse space
• Reduce hidden costs: property tax, calibration & repair, finance charges, etc.
• Improve return on invested capital (Much improved EBITA)

The Technical Diagnostic Services’ Asset Management Solution is aligned with ISO 55000 standards released in
January 2014 for deploying an integrated, effective asset management system.

KEY FEATURES & BENEFITS

Complete Visibility of Test Assets
By storing inventory data in one centralized location, you have complete visibility of all relevant details regarding an
asset including its exact location, assigned users, scheduled projects, calibration deadlines, and more. Additionally,
warehouse coordinators can efficiently plan test schedules and allocate assets to personnel / projects.

Identify & Sell Underutilized Assets
Rapidly determine which assets have not been used within the last 3-18 months. By selling these assets while they
still have value, you can fund more appropriate test and measurement equipment. Avoid incurring hidden costs such
as depreciation, property tax, calibration, and insurance.

Locate Test Assets in Seconds
Finding test equipment quickly helps speed up development time and eliminates duplicate, unnecessary purchase.
Drill down by product category and model number to find the precise equipment you need and important data like
quantities available, exact locations, and future project assignments.

Technical Diagnostic Services • 15825 Trinity Blvd • Fort Worth, TX 76155
P: (817) 465-9494 • F: (817) 465-9573
[email protected]
www.TechnicalDiagnostic.com

• Test Equipment Rentals & Sales
• Calibration & Repair Services
• Turbine Services

Qualified Staff • Certified Equipment • Exceptional Service

Improve Performance with Investment Reporting
Complete visibility of your assets provides the user with the ability to make informed purchase decisions.
TRACKQUIP dashboards allow you to monitor key metrics such as asset utilization, idle assets, and calibration status
as they improve overtime.

Control the Calibration Process
Equipment coordinators can see which projects an asset is assigned to and decisively plan out maintenance and
calibration schedules. Understanding which stage an asset is at in its lifecycle enables more informed purchased
decisions for future projects.

Repair and Calibration Management
Manage the full repair and calibration life cycle including end user notification, planning, scheduling and end of life
disposal

Key Modules

• Asset Register- Audit, tag and input all assets into Asset Register. Data is then cleansed, summarized
and imported into a centralized database.

• Asset Tracking & Logistics- Seamlessly track assets through their entire life cycles.
• Test Management- Schedule and manage specific test projects by assigning assets and

personnel. Accurately calculate the cost of test.
• Investment Dashboard- Monitor key performance indicators of your business to make informed

decisions.

A PARTNER YOU CAN TRUST

For over 30 years, Technical Diagnostic Services has been managing large inventories of test and measurement
equipment throughout North America

Our Process

The Technical Diagnostic Services Asset Management Solution begins with an in-depth audit of your test equipment
and asset management processes so we can fully visualize the scope of both your challenges and your opportunities.
Our team will evaluate your inventory by tagging and recording every piece of equipment. We then assign values to
each of those assets and import the clean data into our TRACKQUIP software. This allows us to accurately analyze
your situation, identify areas for improvement, and propose a world-class test management process redesign.

Implementing the TRACKQUIP asset management software is simple and catered to your specific requirements.
Plus, you’ll never be without the valuable knowledge needed for successful asset management. Technical Diagnostic
Services provides ongoing training and support for key users, as well as consulting for the implementation of your
customized asset management strategy.

Technical Diagnostic Services • 15825 Trinity Blvd • Fort Worth, TX 76155
P: (817) 465-9494 • F: (817) 465-9573
[email protected]
www.TechnicalDiagnostic.com

Electrical Test Equipment Cable Tracers and Locators (cont’d) Hukseflux

GreenLee Model: I-V400

Model: 2011 Curve Tracer
• PV module/string output voltage to
Circuit Tracer
1000VDC
• Traces circuits in both metallic and • PV module/string output current to 10 amps
nonmetallic conduit
DC
• Finds breaks in wires and shorts to ground • cell temperature via external PT1000 probe
• Incorporates auto gain circuitry for • Solar radiation [W/m2] via reference cell

enhanced accuracy Megger
• Locates and identifies blown fuses
• Supports transmitter-to-receiver distances Model: AccuTrace 656621

High Voltage Cable Route Tracer
• Peak and null-tracing capability
Model: CDS-2010U • Traces and determines depth of any

DC Unipolar Cable Fault Locator conductive line
• Traces energized or de-energized lines
• Highest burn-in capability compared to
other units of the same size through inductive or conductive coupling

• Single-pulse or continuous discharge
modes with adjustable thump (IMPULSE)
repetition rate from 6 to 10 seconds

• Used inclusively with the TDR-20

Megger Metrohm

Model: EZT12 Model: E2770

12kv Portable Fault Location System Cable Fault Locators/TDR

• Arc Reflection Method (ARM) cable fault • For use with most metallic telecom cable
prelocation
• Measures up-to 26,000 feet
• 500 Joule pinpoint surge generator
• Additional 650 ft and 1300 ft ranges
• DC testing for breakdown detection
• Accuracy: ±0.1% ±10 nS relative to time
• Insulation resistance measurement and
sheath testing • Store 15 readings in memory

• A 4-kV or 12-kV version • Lead length compensation for better
accruacy

High Voltage Subsite

Model: TDR-1669 Model: DW75R

Reflectometer Sub-Surface Locator
• Automatic Identification of Key Cable • Used for locating energized or unenergized

Parameters (cable length and distance to cables underground
fault) • Accurate results
• Quick Location of Faults
• 32 Accessible Memory Locations for Ground Resistance Testers
Internal Trace Storage
• Large 10.4î VGA Color Display AEMC

Hipotronics Model: 3731

Model: HSDAD Ground Resistance Tester
• Measures ground resistance (2 and 3-point)
Directional Acoustic Detector
• Detection is uni-directional and soil resistivity (4-point)
• Ballistic impulse LED display • Touch potential measurements
• Three measurement modes • Measures from 10Ω to 1200Ω
• Capable of fault locating under any surface • Direct reading
• Auto-ranging - automatically selects range

step voltage tests and touch potential

12 www.TechnicalDiagnostic.com

Ground Resistance Testers (cont’d) AEMC Electrical Test Equipment

AEMC Model: 4630 kit

Model: 4610 Ground Resistance Tester
• Measures soil resistivity (4-Point) method
Digital Ground Resistence Tester • Measures ground resistance (2- and
• Measures soil resistivity (4-Point) method
• Measures ground resistance (2- and 3-Point) Fall-of-Potential method
• Step voltage tests and touch potential
3-Point) Fall-of-Potential method
• Step voltage tests and touch potential measurements
• Auto-Ranging: automatically selects the
measurements
• Auto-Ranging: automatically selects the optimum range

optimum range Megger

AEMC Model: 250260

Model: 4620 3-Terminal Ground Resistance Tester
The 3-terminal ground resistance tester
4-Point Ground Resistance Tester is the economical choice for electrical
• Measures ground resistance (2 and3-point) contractors, plant electricians, telephone
and CATV technicians making routine
and soil resistivity (4-point) ground resistance tests on single
• Touch potential measurements electrodes and other simple grounding
• Measures from 10Ω to 1200Ω systems. The system is easy-to-use for
• Direct reading quick measurement of resistances from 0.5
• Auto-ranging - automatically selects range to 500 Ω

step voltage tests and touch potential Megger

AEMC Model: DET 2/2

Model: 4630 Ground Resistance Tester
• Wide resistance range from 10Ω to 19.99kΩ
Ground Resistence Tester
• Measures soil resistivity (4-Point) method (auto-ranging)
• Measures ground resistance (2- and • ±0.5% of reading accuracy ±2 digits
• Continuously adjustable test frequency from
3-Point) Fall-of-Potential method
• Step voltage tests and touch potential 105-160 Hz
• 40V peak-to-peak interference tolerance
measurements • Microprocessor-controlled
• Auto-Ranging: automatically selects the
Megger
optimum range
Model: DET 5/4
AEMC
Ground Resistance Tester
Model: 6470 • Four Ranges from 10mΩ to 20kΩ

Digital Ground Resistance Tester (Autoranging)
• 4-Pole (4-Point) Fall-of-Potential • 40V Peak-to-Peak Interference Tolerance
• Fully Automatic Operation
measurement for very low resistance • Three- or Four-Terminal Measurement
measurements with manual or automatic • Noise rejection to 40V
frequency selection and automatic lead
compensation Yokogawa
• 3-Point Fall-of-Potential measurement
• 3-Point earth coupling measurement Model: EY200
• Manual or automatic
Digital Ground Tester
AEMC • Designed to safety standard IEC 61557
• Reference to IEC 60529: Degrees of
Model: 6472
protection provided by enclosures (IP54).
Digital Ground Resistance Tester/Tower Measurement can be made even under
• 4-Pole (4-Point) Fall-of-Potential adverse weather conditions
• Large, easy-to-read LCD digital display
measurement for very low resistance • 2P Test leads (for simplified measurement)
measurements with manual or automatic has a structure that both the safety alligator
frequency selection and automatic lead
compensation [email protected] 13
• 3-Point Fall-of-Potential measurement
• 3-Point earth coupling measurement
• Manual or automatic

(817) 465 - 9494

Electrical Test Equipment Ground Resistance Testers (cont’d) High Voltage

Yokogawa Model: PFT-503CM

Model: 240414 AC Portable Hipot Tester

Hand Crank Insulation Tester • Applicable for testing to ANSI/IEEE C37.60
• Fully adjustable and can be used up-to its 3
The 2404 insulation tester is a reliable,
hand-driven insulation tester using a DC- kVA rating with ease
DC converter. The 2404 includes a number • Features rugged, dual-range kilovoltmeter
of useful and easy-to-use features.
and triple-range current meter
Hipot - AC • External safety interlock, zero start safety

AEMC interlock and self re-setting over-current
protection
Model: H110
High Voltage
Programmable Digital Electrical Safety
Model: TDB-60
• 5kV AC
Very Low Frequency - Tan Delta
• No load set-up of trip current and output
voltage • Frequency range of 0.01 to 0.2Hz
• In line measurement of current and voltage
• Large 24x2 character LCD with adjustable • Automatic readout of frequency and loss
backlight
angle
• Quick and easy set-up from the front panel • Automatically adjusts to VLF generator

High Voltage frequency
• Real time readout of loss angle
Model: ALT-123/60
High Voltage
AC Aerial Lift Bucket Truck Tester
Model: VLF-34E
• Advanced design features provide many
significant advantages over other bucket Very Low Frequency AC Hipot
truck testers
The VLF-34E is a new generation VLF
• Continuously adjustable AC output up-to AC hipot that uses a solid state design
120 kV with a full 7 kVA tap at 60 kV with microprocessor controls. It meets the
requirements of applicable world standards
• High output capacity enables unit to meet regarding cable testing up to 25kV class
all testing requirements maintenance testing. It is light, compact,
rugged, and very portable. Its sine wave
High Voltage output is suitable for using optional external
PD and TD detection equipment.
Model: PFT-1003CM
High Voltage
Portable Hipot Tester
Model: VLF-6022CM
• Applicable for testing to ANSI/IEEE C37.60
• Fully adjustable and can be used up-to its 3 Very Low Frequency AC Hipot

kVA rating with ease • Burns, breaks-down and conditions a cable
• Features rugged, dual-range kilovoltmeter fault much quicker than conventional DC
burners
and triple-range current meter
• External safety interlock, zero start safety • Since polarity reversed at zero, there are no
transients or contact arcing
interlock and self re-setting over-current
protection • Fault locating is reduced with existing
thumper/radar devices
High Voltage
High Voltage
Model: PFT-303CM
Model: VLF-65E
30kV Portable AC Hipot Test Set
Very Low Frequency AC Hipots
• Input: 120V, 60Hz, 15 amps. (230V
version is available as a factory order, not The VLF-65E Test Set is the latest addition
switchable or field upgradable) to the new generation of VLF AC Hipots
from HVI that use a dry-type, air cooled,
• HV Output: 0-30kVac, 1KVA resistive solid state design with microprocessor
load up to 3 KVA capacitive load, 100 mA control. Its test programming, numerous
current. output functions, wireless communications,
and data retrieval are intuitive and easy
• Duty Cycle: 3 KVA: 1/2 hour ON, 2 hour to learn, as well as its PC Application
OFF software.

14 www.TechnicalDiagnostic.com

Hipot - AC (cont’d) High Voltage Electrical Test Equipment

Megger Model: PTS-75

Model: 230315 DC Hipot Tester
• Regulated input (ideal for field generator
AC/DC Hipot Tester
• 3kV use) for more stable and accurate leakage
• Front panel adjustable leakage current trip current readings
• Built-in megohmmeter enables the same
from 0.3-12mA instrument to be used for insulation
• Automatic failure shutdown with visual and resistance testing
• Includes guard/ground return modes to `
audible warnings bypass stray unwanted leakage current
• Zero start/reset in event of failure
• Ground continuity check of three-wire High Voltage

devices with high voltage interlock Model: PTS-80

Megger DC Hipot Tester
• Internal HV shortline solenoid with
Model: 230415
discharger resitor
AC Hipot Tester • Continuous duty cycle
• Automatic transit protected meters
• General continuity check of three-wire • Input: 120v, 10 Amps
devices with high voltage interlock • Output: 0-80 Kv DC, 10mA

• One-second or continuous testing Hipotronics
• Automatic failure shutdown, with visual and
Model: 860PL
audible alarms
DC Hipot
Hipot - DC Megger • Accurate voltage and current

Model: 569001-KIT measurements are assured since voltage
readings are taken directly at the output of
Leak & Corona Tester the high voltage transformer and current
measurements are taken in the return leg
• Features compact long-distance directional • Low output impedance
pickup • No internal leakage at full load

• Locates gas leaks and corona within inches Hipotronics
of the source
Model: 880PL
• Lightweight for easy use, even in remote
field locations DC Hipot Tester
• Zero start interlock
• Insensitive to high ambient audible noise • Three range voltmeter
levels • Four range current meter
• Shielded output cable
High Voltage • Guard circuit

Model: PTS-100 HV Diagnostics

DC Hipot & Megohmmeter Test Set Model: HVA28TD

• +/-1% input voltage regulator on some Hipot Tester
models • Integrated TD unit
• TD Resolution ±1x10-4
• Anti-static glass front meters • TD Analysis & Reporting using TD Control
• Rugged and transit protected meters
• Five range current meter with 0 - 1uA low Center
• Digital RMS metering
scale • Smallest unit available
• 10 mA continuous duty output rating most • Bluetooth/USB Mem. stick PC Interface

High Voltage [email protected] 15

Model: PTS-130

DC Hipot Tester

• 10 mA output current rating for fast
charging

• Built-in megohmmeter enables the same
instrument to be used for insulation
resistance testing

• Includes guard/ground return modes,
internal HV shorting solenoid with
discharge resistor, and external interlock

(817) 465 - 9494

Electrical Test Equipment Hipot - DC (cont’d) AEMC

HV Diagnostics Model: 6555

Model: HVA60 15KV MEGOhmmeter
• Detection and measurement of input
Hipot
• Test your 35kV below MV cable systems voltage, frequency, and current prior to
• Single Piece Design running a test
• Weighs only 126 lbs / 57kg • Measurements at a fixed test voltage
• Tests fully automatically of 500, 1000, 2500, 5000, 10,000 or
• Real time oscilloscope display 15,000VDC
• Measurements at an adjustable test voltage
Megger between 40 and 15,000VDC

Model: 220015 Fluke

DC Dielectric Test Set Model: 1520
• Multi-range metering for precise test
Insulation Tester
voltage adjustment and leakage current • Large, backlit LCD
measurement as low as 0.1mA • Three output voltages 250V, 500V, 1000V
• Continuously variable output voltage with • Auto-ranges 4MΩ-to 4000MΩ
zero-start safety interlock • AC/DC voltage measurement up-to 600V
• Fast charging of high capacitance samples
• Current gaurd circuit for highly accurate for safety
measurements • Last reading memory display

Megohmmeters/Insulation Testers Fluke

AEMC Model: 1587

Model: 1026 Insulation Tester & Multimeter
• Combines a digital insulation tester with a
Digital Megohmeter/Insulation Tester
• 250V, 500V & 1000V Test voltages full-featured, true-rms digital multimeter in
• Insulation measurements to 4000MΩ. a single compact, handheld unit
• Resistance measurements to 4000 Ω. • Tests: insulation, AC/DC voltages
• Continuity test/beeper
• Automatic discharge when test button is Hioki

released Model: 3454

AEMC Insulation Tester
• One body with three ranges: 250 V/500 MΩ,
Model: 5050
500 V/500 MΩ and 1000 V/4000 MΩ
Digital/Analog Megohmmeter • Accurate digital display
• True Megohmmeter • Insulation measurement through sight and
• Test voltage combination of 500V, 1000V,
sound
2500V and 5000V • Checks ground wire continuity with a short
• Insulation measurements from 30kΩ to
current of 200mA
10TΩ
• Adjustable and programmable test voltage Hioki

(40 to 5100V) Model: 3455-01

AEMC Insulation Tester
• Measure insulation of high-voltage
Model: 5060
equipment (such as transformers)
Insulation Tester • Automatically calculate and display PI and
• True Megohmmeter
• Test voltage combination of 500V, 1000V, DAR
• Step voltage testing, temperature
2500V and 5000V
• Insulation measurements from 30kΩ to compensation, temperature measurement,
and leakage current display
10TΩ
• Adjustable and programmable test voltage

(40 to 5100V)

16 www.TechnicalDiagnostic.com

Megohmmeters/Insulation Testers Megger Electrical Test Equipment

Megger Model: 6410-863

Model: 210415 MJ159 Megger Tester
• Accurate results in under three seconds
Megohmmeter • Auto current reversal cancels
• Multi-range metering for precise test • Fuse protected to 600 V

voltage adjustment and leakage current Megger
measurement as low as 0.1mA
• Continuously variable output voltage with Model: 212359
zero-start safety interlock
• Fast charging of high capacitance samples Insulation Tester
• Current gaurd circuit for highly accurate • No scale multipliers
measurements • Multiple test voltages for spot and step

Megger voltage testing
• Guard terminal to eliminate surface leakage
Model: 1001-940
current
Megger
• 5 kV Metrohm
• Accurate results in under three seconds
• Auto current reversal cancels Model: DMH251
• Fuse protected to 600 V
Insulation Tester
Megger • Used for measuring insulation resistance at

Model: 1001-944 test voltages of 250, 500 and 1000 V
• Can measure AC/DC voltages and low
Megger
• 10 kV resistance
• Insulation testing up to 500 V and 100 G-Ω • Typical Accuracy ±5% Rdg ±1 Digit

(MIT410-TC2) Megger
• Insulation testing up to 1000 V and 200 G-Ω
Model: GM11
(MIT430-TC2)
• Patented analog arc and dual digital display Insulation Resistance Tester
• Designed for testing smaller devices
Megger • Four selectable test voltages: 500, 1000,

Model: 6111-428 2500 and 5000 VDC
• Insulation resistance measurement to 500
Insulation Tester
• Accurate results in under three seconds GΩ
• Auto current reversal cancels
• Fuse protected to 600 V Megger

Megger Model: MEG10-01

Model: 6410-593 Insulation Tester
• Operates from main or rechargeable supply
Insulation Tester • Real-time data output and on-board storage
• Accurately measures ground resistance
for subsequent download Results displayed
under the most demanding conditions High as insulation resistance or leakage current
resolution ó 0.001 • Integral timer for automatic insulation
• Autoranging Simple menu-driven operation resistance and polarization index tests

(817) 465 - 9494 [email protected] 17

Works wherever Keeping the lights on since 1889
you work.

5/10/15 kV insulation
resistance testers

Now includes applications
requiring 15 kV!

■■ 30 TΩ maximum resistance (15 kV)
■■ High noise immunity –

3mA (5kV & 10kV) 6 mA (15kV) of
noise rejection
■■ PI, DAR, DD, SV and ramp test
■■ Operate from battery or AC source
■■ Rapid charge Li-ion battery
■■ Safety rated CATIV 1000 V to 3000 m (15 kV)
■■ Advanced memory with time/date stamp

Megger 5/10/15 kV insulation testers work
wherever you work...even up to 220 kV substations.

Electrical Test Instruments Megohmmeters/Insulation Testers Megger Electrical Test Equipment

Megger Model: MIT410

Model: MIT 1020/2 Insulation Tester
• Insulation testing up to 500 V and 100 G-Ω
Insulation Tester
(MIT410-TC2)
• Line supply or battery operated • Insulation testing up to 1000 V and 200 G-Ω
• Digital/analog backlit desplay
• Measurement range to 35 TΩ (MIT430-TC2)
• Automatic insulation resistance tests • Patented analog arc and dual digital display
• Automatic dielectic adsorption ratio,
Megger
polarization index, step voltage, and
dielectric discharge tests Model: MIT420

Megger Insulation Tester
• CAT IV 600 V Rated
Model: MIT 510 • Adjustable insulation test voltages -

Insulation Tester provides 250 V to 1000 V or 50 V to 1000 V.
• A special applications instrument (Model
• Selectable test voltage in steps from 250V
to 500V MIT40X) offers test voltages from 10 V to
100 V in 1 V steps.
• Measurement range to 15T Ω • Dual digital display readout
• Large easy to read backlit LCD
• Line supply or battery operated
• Automatic insulation resistance tests

Megger Yokogawa

Model: MIT1525 Model: MY40-01

Megger Digital Insulation Tester
• CAT IV 600 V Rated
• Adjustable insulation test voltages - • Digital model with 4 voltage/resistance
ratings
provides 250 V to 1000 V or 50 V to 1000 V.
• A special applications instrument (Model • Multifunction

MIT40X) offers test voltages from 10 V to • Insulation resistance, AC voltage and
100 V in 1 V steps. conductor resistance measurement
• Dual digital display readout
• Insulation test mode: Comparator, memory,
Megger auto-hold and discharge functions

Model: MIT310 Micro-Ohmmeters/DLRO’s

Insulation Tester AEMC
• Extremely easy to use
• Tough rubber armored case Model: 6240
• Self contained protective cover
• Live circuit warning DLRO
• Intelligent Safety System for protection
• Measures from 1µΩ to 400Ω

• Test current selection from 10mΩ to 10A

• Manual temperature compensation (with
DataView software)

• Front panel polarity reverse function

• Stores up to 99 test results

Megger AEMC

Model: MIT400 Model: 6250

Insulation Tester Digital Micro Ohmmeter

• CAT IV 600 V Rated • Measures from 0.001mΩ (1µΩ resolution)
to 2500.0Ω
• Adjustable insulation test voltages -
provides 250 V to 1000 V or 50 V to 1000 V. • Test current selection of 1mA, 10mA,
100mA, 1A and 10A
• A special applications instrument (Model
MIT40X) offers test voltages from 10 V to • RTD temperature probe to check tested
100 V in 1 V steps. sample (optional)

• Dual digital display readout • Selectable metal types

(817) 465 - 9494 [email protected] 19

Megger... the Pioneer Patented analog/digital
of Insulation Testing. display with real-time
pointer movement
For over 100 years, Megger has been the
leader in insulation testing. Dual digital display
(shows test voltage
The MIT400 Series is the perfect high performance AND measurement result)
1-kV insulation tester for contractor, commercial, plant Test result range
and telecom applications. Besides these “knock-out” storage
specs, this instrument also provides results storage, Selectable buzzer
wireless Bluetooth download and a unique model thresholds/limit alarms
with test voltages from 10V to 100V (in 10V steps),
for special applications. CATIV 600 V rated in
all test modes
Weatherproof IP54 rated
3 year warranty
High resistance range

DAR, PI and timed test
diagnostic testing capability

TRMS voltage measurement

Selectable 200 or 20 mA
continuity test

MIT400 Series
1-kV Insulation Tester...
Get your hands around
this great test instrument
today.

Megohmmeters/DLRO’s (cont’d) Megger Electronic Test Instruments

AEMC Model: DLRO200

Model: 6290 Ohmmeter
• Test currents from 10 A to 200 A DC
Micro-Ohmmeter • Filtered direct current output eliminates
• Accurately measures low contact
magnetic transients
resistances with test currents up to 200A • Up to 0.1 µ resolution
• Measures resistances from 0 to 20mΩ • On board memory for up to 300 test results
• Resolution of 0.1µΩ
• Analog bargraph indicator with backlit and notes
• RS232 port to download stored results
digital display
• Stores up to 200 test results Megger

Megger Model: DLRO200-115

Model: 247000 Insulation Tester
• Test currents from 10 A to 200 A DC
DLRO w/ Charger • Filtered direct current output eliminates
• Test currents from 10 A to 200 A DC
• Filtered direct current output eliminates magnetic transients
• Up to 0.1 µ resolution
magnetic transients • On board memory for up to 300 test results
• Up to 0.1 µ resolution
• On board memory for up to 300 test results and notes
• RS232 port to download stored results via a
and notes
• RS232 port to download stored results via a PC or laptop

PC or laptop Phenix

v Megger Model: MRM-100

Model: 247001 Digital Microhmmeter
• Allows for user interface to easily program,
Digital Low Resistance Ohmmeter
• Resolution as fine as 0.1Ω read, store, and print tests
• Standard accuracy of ±0.25% • Allows user to vary test current from 10
• Kelvin-type, four-wire measurement
Amps to 105 Amps and measure 1 micro-
eliminates errors caused by lead and ohm to 240 milli-ohm
contact resistances • Ability to store and print up to 300 Readings
• Digital readout with automatic zero circuit
eliminates field test inaccuracies Raytech

Megger Model: Micro Centurion II

Model: 1000-348 Precision Micro Ohmmeter
• User selectable test current: 10, 20, 50, 100
DLRO10HD DLRO
• Insulation testing up to 500 V and 100 G-Ω and 200 Amperes
• Automatic measurements of low resistance
(MIT410-TC2) • Pure filtered DC power source for the
• Insulation testing up to 1000 V and 200 G-Ω
highest accuracy readings
(MIT430-TC2) • Stores up to 2000 completed test results
• Patented analog arc and dual digital display
Raytech
Megger
Model: Micro-JR
Model: DLK0200
Automatic Micro Ohmmeter
200A Micro-Ohmmeter • Fully automatic, microprocessor controlled;
• Small and weighs less than 15kg Test
performs over 2,000 tests with 10 ampere
currents from 10 A to 200 A d.c. 0.1 µ best output
resolution • Precision measurements with forward &
• On board memory for up to 300 test results reverse current
and notes RS232 port to download stored • Wide measuring range from 0.1 mΩ to 400
results or for real time output to a printer kΩ
• Supplied complete with 5m test leads
[email protected] 21
(817) 465 - 9494

Electrical Test Instruments Micro-Ohmmeters/DLRO’s (cont’d) Knopp

Vanguard Model: K-3

Model: Auto-Ohm Phase Sequence Indicator

True DC Micro Ohmmeter • Is used to determine the phase sequence
(A-B-C or C-B-A) of three-phase voltages
• 10 to 100 Amperes true continuous DC
current • The K-3 phase sequence is of the rotating
disk design; there are no lights to burn out
• Automatic control of current rise and fall
time • All internal connections are soldered and
there are no exposed metal parts on the
• Digital resistance reading from 1 micro-ohm housing
to 300 milli-ohm
Megger
• Store and display last 3 readings
Model: 560060
Phase Testing
Motor & Phase Rotation Tester
AB Chance
• Simple meter deflection provides straight
Model: H1876 forward rotation indication

Phasing Tester • Determines rotation direction of one, two
or three-phase motors before connection
• Used to measure high voltage AC from to line
phase to phase at 16kV
• Determines phase rotation or sequence of
• Voltage can be measured up to 48kV energized power circuits

• Permits checking of AC voltages on • Identifies true-phase sequence
distribution and transmission circuits from
2.3kV to 48kV

AEMC Multimeters Megger

Model: PMR-1 Model: PSI-700

Phase Rotation Meter Phase Sequence/Continuity Indicator
• Provides positive identification of phase
• Phase rotation (ABC or BAC) LED
indicators sequence of energized lines and indicates
which phase, if any, is faulty
• Bright LED indication of Live or Open • Indicates phase continuity
Phase (A, B, C) • Indicates faulty phase if continuity is not
proven
• Meets EN 61010, 600V, CAT III safety
requirements Arbiter Systems Inc.

• Color-coded 5 ft leads and alligator clips Model: 911A

Extech Phase Angle Meter
• Clamp-on CT eliminates the need to break
Model: 480403
the current circuit, making measurements
Phase Rotation Meter possible where interruption of power is not
practical
• Indicates rotation direction of the motor • Wide range of both current and voltage
• Determine rotation of a motor without inputs make scaling or tap selection
unnecessary
contact
• LEDs indicate phase orientation (clockwise

or counter-clockwise) and whether each of
the three phases is live
• Easy to use alligator clips with wide jaws

HD Electric Arbiter Systems Inc.

Model: PRM-100 Model: 928A

Phase Rotation Meter Phase Angle Multimeter

• Determine phase rotation up to 45kV • 0.1% Accuracy
• Power and Energy
• Large 3” meter face for easy reading and • Flicker per IEC 61000-4-15
increased accuracy • Harmonics I, V to 50th, THD
• Phase Angle I-I, V-V, I-V
• Strain relief fittings reduce cable damage at • Waveform Display
point of highest stress

• Includes universal splines for hot stick
attachment

22 www.TechnicalDiagnostic.com

Multimeters (cont’d) Fluke Electronic Test Instruments

Dranetz Model: 287

Model: 314 Digital Multimeter
• 0.025% basic accuract 100kHz AC
Phase Angle Multimeter
• Used to provide an accurate, direct bandwidth
• True RMS AC voltage and current
reading means of performing phase angle • See details at X5 magnification
measurements in power system application
• Unit is insesnsitive to the distortion, level or Fluke
frequency of the signals being measured
• Built-in self-test featrures allow verification Model: 289
of the instrument is performance at anytime
Graphical Logging Multimeter
Extech • Large 50,000 count, º VGA display with

Model: EX470 white backlight
• Multiple sets of measurement information
Multimeter
• 20A max Current can simultaneously displayed at the same
• Type K temperature measurements time LoZ Volts. Low impedance voltage
• True RMS DMM with 12 functions and 0.3% function prevents false readings due to
ghost voltage
basic accuracy AC/DC Voltage & Current,
Resistance, Capacitance, Frequency, Type Fluke
K & IR Temperature, Diode/Continuity, Duty
Cycle Model: 87-V

Extech Digital Multimeter
• True RMS AC voltage and current
Model: EX510 • Touch-hold, continuity, relative mode, and

Multimeter diode test
• Averaging DMM with 9 functions and 0.09% • Four Ω-digit high resolution mode
• Min/Max to record the minimum, maximum,
basic accuracy
• AC/DC Voltage & Current, Resistance, and average 250 S peak min/max
• Frequency, Duty Cycle, Diode/Continuity • Measure up to 1000V and 10A (AC/DC)
• Dual sensitivity frequency functions
Fluke
(electrical/electronic)
• 1000V input protection on all functions Model: 76

Extech Multimeter
• Capacitance from 99.99 nF to 9999 µF
Model: TK505 • Frequency of voltage from 1 Hz to 20 kHz
• Lo-Ω range with Fluke is proprietary Zero
Multimeter Kit
• Includes EX505: True RMS, autoranging, Calibration, offers 0.01Ohm resolution
with increased noise rejection. Useful
rugged, waterproof multimeter with 11 for checking contact resistance in motor
functions starters
• Includes EX730: 800A True RMS
• AC/DC Clamp Meter (0.1A Resolution, Fluke
• ±3% AC accuracy)
• Also includes: DV20, 480172 Model: 87

Fluke Multimeter
• Accurate frequency measurements on
Model: 187
adjustable speed drives (ASD) due to
Digital Multimeter Fluke-designed low-pass filter
• Basic DC accuracy of 0.025% at 50,000 • Built-in thermometer allows temperature
measurements without a separate
counts thermometer
• True-RMS AC, AC+DC, dbm, dBV • Peak Min/Max allows capture of
• 100kHz AC bandwidth intermittents as fast 250 µS
• Built in frequency counter 0.5Hz - 1MHz
• Temperature readings in °C or °F using [email protected] 23

optional K-type thermocouple adapter

(817) 465 - 9494

Electrical Test Instruments Multimeters (cont’d) Voltage Detectors

Fluke TIF Instruments Inc.

Model: 28IIEX Model: 300HV

Multimeter Voltage Detector TIC Tracer

• A completely sealed, IP67 rated case • Safely detect AC voltage
• Withstands drops up to 10 feet or 3 meters
• Instantaneous response
(with holster)
• Dustproof per IEC60529 IP6x / Waterproof • Audible signal

per IEC60529 IPx7 • Indicator light
• 4-1/2 digit mode for precise measurements
• Range: Lo: 30-1500 Hi: 1500-122,000V
(20,000 counts)
• Power supply: (1) 9V battery
Yokogawa
• Battery life: Approx. 1 year
Model: CA450-E/TE
Relay Test Sets
Process Multimeter
Doble
The Yokogawa CA450 Process Multimeter
is a portable test instrument to combine Model: F2253
a digital RMS multimeter and a loop
calibrator to give process technicians Relay Test Set
the same functionality in one tool. The
Yokogawa CA450 provides 24-Volt loop • 150, 300, or 450 VA current sources AC/
power, reducing the need for carrying a
separate power supply when performing • DC (180 A max) provides the high power
transmitter testing. required for scheme and electromechanical
relay testing

• Convertible source: one voltage and one
current or two currents for maximum testing
flexibility

• Intuitive front panel

Yokogawa Doble

Model: TY530 Model: F6080

Multimeter F6150 Calibrator

3.5-digit (6000-count dual display, • User-friendly front panel has clearly marked
31-segment bar graph display), RMS type connections for the F6150.
Measurement Functions: Voltage, Current,
Resistance, Continuity Check, Diode Test, • Sturdy, portable housing protects the unit
Frequency, Capacitance, Temperature, in the field.
Logging-mode memory for 1600 data
(TY530 only) • Step-by-step test procedure ensures quick
calibration of the F6150.

Yokogawa Doble

Model: TY720 Model: F6150

Multimeter Relay Test Set
4.5-digit (50,000-count dual display,
51-segment bar graph display), RMS type • The F6000 has six, high power, DC coupled
Measurement Functions: Voltage, Current, sources
Resistance, Continuity Check, Diode Test,
Frequency, Capacitance, Temperature, Low • Provides six currents for differential relay
Power Resistance testing or four voltages and four currents

Fluke • Includes an independant DC battery
simulator for powering the digital and static
Model: 80K-6 relays

Voltage Probe Doble
A high voltage probe that allows a
multimeter to measure up to 6,000V. Model: F6150e
Intended for low energy applications only
Relay Test Set

• Performs standard relay calibration and
verification testing of high burden and
microprocessor relays

• Analog testing of 1A and 5A protection
devices

• Performs state simulation and transient
testing

• Tests 0.2-class metering CTs

24 www.TechnicalDiagnostic.com

Relay Test Sets (cont’d) Megger Electronic Test Instruments

Doble Model: SMRT-36D

Model: F6150SV Three Phase Relay Tester

Relay Test Set • New Integrated Smart Touch View Interface
(STVI)- Multi-colored graphics with intuitive
• Simulate three streams of IEC 61850 9-2LE navigation - Enhanced dynamic test
sampled values through one fiber-optic capabilities- Built-in test report generator
port and one copper (RJ45) port (F6870
Sampled Values option required) • New high current output - 60 Amps at 300
VA per phase
• Wi-Fi capable (optional)
• Improved low current AC output
• Simulates (publishes) and subscribes to
IEC 61850 GOOSE messages involving
multiple IEDs

Doble Megger

Model: F6300 Model: STVI

High Power Current Amplifier Handheld Controller SMRT/MRCT

• High-Power Current Amplifier • Large High Resolution Color TFT LCD
touch-screen intuitive smart navigation
• Capable of test complete high-burden makes testing relays easier
electromechanical protection schemes and
panels. • Designed for either right or left handed
operation with control knob centrally
• Transient Mode located

• Two channels up to 180 A at 675 VA to • Automatic Ramp, Pulse Ramp
simulate close-in faults on the power
system

Magna Engineering SMC

Model: MRS-300 Model: Raptor Mentor 12

Mini Relay Test Set Primary Injection Testing

• 300A continuous current output • 3 voltage + 3 current outputs, switchable to
• Accurate AC current control with vernier 6 current outputs. User-upgradeable up to
• High speed timing 12 outputs (two complete 3-phase systems)
• Timed 120 VAC output
• N/O or N/C contact timing for live and dry • 12 binary inputs + 8 binary outputs

contacts • Auxiliary 0 - 250 VDC source to power the
• Dynamic drop-out and pick-up function tested relay

Manta • DC current and voltage mea

Model: MTS-5000 Current Transformer Test Sets

Protective Relay Test System Adwel International

• An all-in-one relay test system with a direct Model: CTX-2000
front panel interface for all functions.
Current Transformer Test Sets
• For testing and calibration of protection and
control relays, simulation of power system • Used to quickly and accurately test and
phenomena, and verification of voltage, verify excitation, saturation, ratio and
current, phase, and power transducers polarity on current transformers

• Digital and analog current readings with
run/hold feature and data output for plotters

• Automatic display of ratio up to 2000:1,
measurement of any ratio of current
transformer

Megger Lake Digital

Model: SMRT1 Model: CTMP

Single Phase Relay Testing CT Test Set

• Small, rugged, lightweight and powerful • Performs comprehensive tests of current
transformers and their secondary units
• Operate with or without a computer
• Built-in phase angle meter
• Intuitive manual operation with Smart Touch
View Interface • Push to Test polarity

• High current, high power (75 Amps/400 VA • Phase angle meter may be used for load
rms) checks after energization of power circuit

• Network interface provides IEC 61850 test

(817) 465 - 9494 [email protected] 25

Current Transformer (cont’d) Oil Testing

Electrical Test Instruments Megger Hipotronics

Model: CTER-91 Model: OC60A

Ratio and Polarity Test Set Oil Dielectric Test Set

• Tests CTs mounted in transformer or • Output voltages to 60kV
switchgear
• Tests insulating oils per ASTM and IEC
• Saturation, ratio and polartiy test performed specifications
without changing leads
• Automatic HV shutdown at breakdown

• Digital memory kilovoltmeter

• Meter accuracy ±2% FS

Staco Energy Products Megger

Model: 1520 Model: OTS 60PB

Variable Transformer Oil Dielectric Tester

• The 1510 /1520 series variable transformers • Microprocessor controlled fully automatic
are highly reliable, dependable and oil test sets
accurate AC voltage control devices
• Internal rechargeable battery
• The 1520, 240 volt variable transformer is
rated at 9.5 ampheres for constant current • Preprogrammed national specifications
loads
• Safety interlock on test chamber door

• RS-232 output for optional printer kit

Vanguard Power Factor Test Set

Model: EZCT Doble

Current Transformer Test Set Model: M4100

• Perform saturation, ratio and polarity tests Power Factor Test Set

• Fully automated • Totally eliminates substation signal
interference with Doble is patented Line
• Comprehensive graphic and tabulated test Frequency Modulation technology
reports
• Generates its own clean test signal for the
• Store 64 Records (of 10 Saturation Curves) most reliable and repeatable results

• 2000V max output • The highest power to better replicate in
service conditionSe

Vanguard Doble

Model: EZCT-2000C Model: M5300

Circuit Breaker Test Set SFRA

• Perform saturation, ratio and polarity tests The M5300 detects mechanical failure or
movement of windings due to short circuits,
• Fully automated mechanical stresses or transportation.
Use it to ensure transformer performance,
• Comprehensive graphic and tabulated test reduce maintenance cost, and increase the
reports service life of transformers.

• Store 64 Records (of 10 Saturation Curves)

• 2000V max output

High Voltage Doble

Model: DTS-60D Model: M5150

Oil Dielectric Tester Performance Verification Cell

• Three motorized rates of rise, 500V / 2000V Confirmations that your Doble SFRA
/ 3000V per second field instruments and leads are working
correctly. This highly-accurate verification
• Rate of rise selector switch with stop / dwell device confirms that your equipment is
positions providing you with results you can trust.
The Doble M5150 can be used in the field
• Arc detection with 20 millisecond shutdown or in the office allowing you to isolate
and failure detection problems between hardware and cables.

• Zero start and test chamber interlock
provision

26 www.TechnicalDiagnostic.com

Power Factor Test Set (cont’d) Megger Electronic Test Instruments

Doble Model: MTO250

Model: M5400 12kV Power Factor Tester

Sweep Frequency Response Analyzer • Power factor test set

• Wide Frequency Range: provides frequency • Automatic and manual operation
response measurement from 10Hz to
25MHz • Accurate and repeatable measurement
results with high noise suppression
• High Resolution: measures frequency
response at logarithmically spaced • Lightweight, rugged two-piece design
intervals of 1.2% with a constant excitation
level • New built-in intelligent temperature
correction (patent pending)

Doble Tettex

Model: M7100 Model: 2816

High-Voltage Asset Analyzer Manual Power Factor Test Set

• Built-in Low Voltage/High Current Multi- • Quality factor: 1-9999
Frequency Source • Test voltage: 0-12 kV
• Test current: 0-15 A
• Combined Source and Measurement Test • Test frequency: 45-65 Hz
Leads • Measuring time 4s; following reading .6s

• True 4-Terminal measurements Transformer Turn Ratio Meters
• Intuitive design where the color or number
AEMC
is the connection
Model: DTR 8510
Megger
Motor / Transformer Testers
Model: 670065
• Ratio Testing: PT/VT from 0.8000:1 to
Capacitance & Dissipation Factor Test Set 8000:1 and CT from 0.8000 to 1000.0
(Auto-Ranging)
• Interference suppression circuits for testing
in high-voltage switchyards • Tests performed by exciting the primary
and reading the secondary; provides safer
• Automatic balancing of dissipation factor conditions for the operator on step-down
• Direct digital readout of capacitance, transformers

dissipation factor and watts dissipated
• Performs all standard UST, GST L-Ground

and GST L Guard

Megger Megger

Model: DELTA4000 Model: 550005B

Current Transformer Excitation Hand Cranked TTR

• Power factor test set • Used for testing of the magnetic tripping
actuator as well as the trip unit for Static
• Automatic and manual operation Trip III Trip units

• Accurate and repeatable measurement • Has convenient 120v outlet plug for
results with high noise suppression portable use

• Lightweight, rugged two-piece design

• New built-in intelligent temperature
correction (patent pending)

Megger Megger

Model: 672001 DELTA-2000 Model: MRCT

Automated Insulation Power Factor Test 3 Phase TTR

• Performs seven different UST and GST • Industry leading test duration using
tests, including guarded and unguarded patented simultaneous multi-tap
measurements reduces testing time by
• High accuracy measurement under severe 20% on multi-tap CTs
interference conditions
• Increased measurement accuracy to
• Can measure either the power factor or support metering class CT testing
dissipation factor (tan Ω)
• Smallest and lightest 2 kV secondary
voltage injection

(817) 465 - 9494 [email protected] 27

Electrical Test Instruments Transformer Turn Ratio Meters Vanguard

Megger Model: ATRT-01B-S2

Model: TTR300 Three-Phase Transformer Turns Ratio
• Highest ratio: 0.8 - 15,000
Transformer Ohmmeter • Microprocessor controlled
• Computer Interface
• Stand-alone or remote-control operation • No calibration required
• Accurately measures ratio, phase deviation • Battery or AC power
• Display excitation current
and excitation current
• Field upgradeable without compromise to Vanguard

calibration Model: ATRT01
• Built-in capability for storing and
Three Phase Transformer
downloading test results in an XML format • Ratio-Measuring Range -- 0.800 to

Phenix 15000.00
• Excitation Voltage/Current -- 40 Vac/0 to 2
Model: P-ATTR-03A
Amperes
Automatic Three-Phase Transformer • Operating Temperature -- 10Ω to 55C (15F

• 20 character x 4 line back-lighted LCD to 122F)
display

• Results can be printed immediately on a
built in 4.5 inch thermal printer

• Store up to 200 transformer test records

Raytech Vanguard

Model: TR-Jr Model: EZCT-10

Single Phase Ratio Meter Current Transformer Test Set

• Laboratory accuracy of measurements of • Perform Saturation, Ratio and Polarity
turns ratio and current Tests

• Graphical display of tap changer test results • Fully AutomatedComprehensive Graphic
• Fully automatic, continuous operation and Tabulated Test Reports

bridge • Plot Multiple Saturation Curves
• Internal storage for test results
• Single push-button operation • Store 64 Records (of 10 Saturation Curves)
Computer Interface
Raytech
Winding Resistance Testers
Model: TR-Spy Mark II
Adwel International
3-Phase Transformer Turns-Ratio Meter
Model: DWR-10
• Automatic measurements of voltage/turn
ratio, current and phase displacement Winding Resistance Test Set

• Internal storage of 100 complete test results • A large, color LCD screen for entering
(greater than 1300 memory locations) equipment details and presenting results, in
various languages
• Ratio testing from 10Ω to 13,000 turns
• An expansive memory capacity for test
results

• Automatic TAP-changer operation

Staco Energy Products Adwel International

Model: 6020-3Y Model: WRT-100

Variable Transformer Winding Resistance Test Set

• Variable Transformer • Tests 2-series windings or primary and
secondary windings with simultaneous
• Output Current: 35A readout

• Direct reading and automatic decimal point
selection of winding resistance

• Indication of test current simultaneous with
winding resistance readings

• Measures resistance ranges from

28 www.TechnicalDiagnostic.com

Winding Resistance (cont’d) Loop Calibrators Electrical Test Instruments

Vanguard Altek Calibrator

Model: WRM-10 Model: 434

Winding Resistance Test Set High Accuracy mA Calibrator

• Measures winding resistances of highly • 0.015% accuracy, 0.001 mA resolution
inductive power transformers • Sources, simulates and reads mA
• Built-in 24V loop supply
• Auto range, 10 Amperes max • Built-in 250 resistor for HART compatibility
• Single turn-and-push knob • Reads DCV
• Measures resistance ranges from 1 micro-

ohm to 2,000 Ω

Vanguard Altek Calibrator

Model: WRM-40 Model: 334A

Winding Resistance Test Set Milliamp/Loop Calibrator

• Portable transformer winding resistance • Sources Milliamps
meter • Simulates two-wire transmitters
• Read milliamp outputs
• Measures resistance ranges from 1 micro- • Power & measure two-wire transmitters
ohm to 500 Ω • Read DC volts to check loop power supplies
• Accuracy to ±0.03%
• Designed to meet IEC61010 (1995),
UL61010A-1, CSA-C22.2 standards

Watthour Testing Yokogawa

General Electric Model: CA11E-2

Model: IB-10 Voltage/Current Calibrator

Watthour Standard • Signal source: DCV (Max. 30V), DCA (Max.
Designed for easy field checking and 24 mA)
calibration of watts, VAR, volts, and current
transducers • Measurement: DCV (Max. 30V), DCA (Max.
100 mA)
Megger
• Features: Auto step (4 to 20mA), 20mA
Model: PA-2505K SINK, Sweep function

AVO Multi-Amp Phantom Load • Options: CA11E-2 Includes rubber boot,
• Housed in compact, heavy duty carrying strap and accessory case

case with tool tray and storage space for a Calibration Instruments
reference standard and test leads
• With all leads connected, a single-switch PIE
simutaneously selects and routes the
desired test current to Model: 334

Milliamp/Loop Calibrator

• Can Source or simulate 4-20mA signals

• Battery life allows up to 125 hours of
nominal use per charge

• Source 0.00 to 24.00mA

• Read 0.00 to 52.00mA

• Simulate 2-wire transmitters 0.00-24.00mA

Scientific Columbus PIE

Model: SC10 Model: 532

Watthour Standard Milliamp/Loop Calibrator
• Designed for easy field checking and • 4 to 20 mA loop functions
• Full 5-digit display
calibration of watts, VAR, volts, and current • EZ-Dial knob
transducers • EZ-Check switch with EZ-Step button
• Hands-free auto step and auto ramp modes
(817) 465 - 9494 • Uses a standard 9V alkaline battery
• 240 VAC tolerant

[email protected] 29

Electrical Test Instruments Calibration Instruments (cont’d) PIE

PIE Model: 541

Model: 535 Frequency Calibrator

Dual Range Loop Calibrator • Accuracy: ± 0.005% of range
• 5 ranges from 1CPH to 20.000KHz for
• Read and Source 0.0 to 50.00mA
• Display current or -15.00 to 125.00% of4- source and read
• Totalize inputs/outputs from 1 to 99999 in
20mA or 10-50mA
• Read 0.00 to 60.00 volts with 2X over range 1.0 to 100.0 minutes
• Read a wide range of frequencies and
ability
• Simulate 2-wire transmitters waveforms from 50mΩ to 120V peak
• Optional analog output for chart recorders
Multifunction Calibrators
PIE
Altek Calibrator
Model: 434A
Model: 830
Milliamp/Loop Calibrator
Multifunction Process Calibrator
• Source 0.000 to 24.000 mA & -25.00 to
125.00% of 4-20 mA • DC voltage and current
• Thermocouples, RTDs, and frequency
• Read 0.000 to 52.000 mA, -99.99 to 99.99 • Simulates two-wire transmitters
• V Simulate 2-Wire Transmitters Power & • Powers and measures two-wire transmitters
• Measures AC voltage
Read 2-Wire Transmitters • Tests continuity
• Menu Selectable 250 W resistor for HART • Two-line display input and output

compatibility

Altek Altek Calibrator

Model: 941 Model: TechCheck 820

Frequency Calibrator Versatile Process Calibrator

• Battery powered frequency calibrator • Functions like a calibrator - Milliamps,
voltage, RTD, T/C & frequency
• Simple Operation
• Measures like a multimeter - Measure AC/
• Accurate to .001% of reading DC volts, Ω and continuity

• Calibrates totalizers • Digital accuracy with analog simplicity

• Frequency calibrator measures in Hz/KHz • Speed sensitive digital potentiometer for
and CPM/CPH fast adjustment

Altek Fluke

Model: 40A Model: 726

Source Frequency Multifunction Process Calibrator

• Laboratory accuracy of measurements of • More precise measurement and calibration
turns ratio and current source performance, accuracies of 0.01%.

• Graphical display of tap changer test results • Two separate channels; measure, source
and view process signals simultaneously
• Fully automatic, continuous operation
bridge • Measure volts, mA, RTDs, thermocouples,
frequency, and resistance to test sensors
• Internal storage for test results and transmitters

• Single push-button operation

Altek Calibrator Fluke

Model: 942 Model: 744

Frequency Calibrator Documenting Process Calibrator - HART

• Calibrate totalizers- output a selectable • Measure/source pressure using any of the
number of pulses over 1 to 99 minutes to 29 Fluke 700Pxx Pressure Modules
verify totalizer readings
• Measure volts, mA, RTDs, thermocouples,
• Save time- calibrate flowmeters, frequency frequency and Ω to test sensors and
transmitters and integrators transmitters.

• Use CPH and CPM Ranges to directly • Source/simulate volts, mA, thermocouples,
display extremely slow signals RTDs, frequency, Ω and pressure to
calibrate transmitters

30 www.TechnicalDiagnostic.com

TDS Rentals & Leasing, LLC

QUALIFIED STAFF • CERTIFIED EQUIPMENT • EXCELLENT SERVICE

TEST EQUIPMENT CALIBRATION & REPAIR SERVICES

TDS Rentals & Leasing, LLC, the leader in providing measurement and test
equipment to the energy industry also offers NIST traceable calibration services.

TDS is already the expert in test equipment applications, repair, logistics, and
guaranteed availability of industrial test equipment. We guarantee reliable calibration
service with quick turnaround time at very competitive rates.

Our laboratory has the capability to calibrate and repair:

• Protective Relay Test • Chart Recorders • Gaussmeters

Equipment • Precision Measuring Instruments • High Current Test Equipment
• Infrared Inspection
• Grounding/Insulation Testers • Multifunction Calibrators
• Documenting Process
• Temperature Test/Measurement • Pressure Test/Measurement
Calibrators
• High Voltage Test Equipment • Transformer Test Equipment • Power Factor Test Equipment

• Multimeters & Clamp Meters • Torque, Humidity Dimensional, • Power Analyzers, Scopemeters

Resistance, Conductivity • Much More…

Calibration/Verification Services Include:

Performance verification and adjustments, as necessary, to ensure the equipments’ performance and accuracy
meet the manufacturers’ specifications. If any parameters are found out-of-tolerance, the measured values are
recorded and adjustments are made to bring the instrument into tolerance.

A Certificate of Calibration or a Certificate of Conformance is issued and a label affixed to the equipment.

The TDS Quality System complies with To ensure that your equipment functions right the first time and
ISO/IEC 17025-2005. The calibrations every time, TDS is committed to the highest possible quality
performed are traceable to the National standards. We will keep your test, measurement, process,
Institute of Standards & Technology and electrical testing and calibration equipment at a consistent high
conform to the requirements of ASME level of operation and accuracy.
NQA-1 (1994), 10CFR50 App. B,
ANSI/ISO 9001-2008 and ANSI/NCSL
Z540-1 (R2006).

Unexpected equipment failure costs you time and money.
Quality and efficiency loss due to equipment inaccuracies can’t easily be measured.

Ask about our ZERO Downtime Calibration Service Option!

(817) 465 - 9494 [email protected] 31

Instrumentation and Controls Multifunction Calibrators (cont’d) Yokogawa

Fluke Model: CA71/SP1

Model: 754 Calibrator

Calibrator • Signal source: DCV, DC, Resistance, RTD,
• Measure volts, mA, RTDs, thermocouples, TC (10 kinds), Frequency, Pulse

frequency, and Ω to test sensors, • Measurement: DCV, DCA, ACV,
transmitters and other instruments Resistance, RTD, TC (10 kinds), Frequency,
• Source/simulate volts, mA, thermocouples, Pulse
RTDs, frequency, Ω, and pressure to
calibrate transmitters • Features: Simultaneous signal source and
measurement capacity, a wide array of
Fluke useful functions, Easy operation, Online

Model: 789 Pressure Calibrators

ProcessMeter Fluke
• Very large dual display
• Enhanced backlight with 2 brightness Model: 719-30G

settings Modular Pressure Calibrator
• 1200 ohm drive capability on mA source
• HART mode setting with loop power and a • Built-in pressure/vacuum hand pump, with
vernier and bleed valve
built-in 250 ohm resistor
• to 10,000 psi/700 BAR(with additional
modules)

• Selectable engineering units

• Min/max, hold, zero, damp functions

• Simple, push-button user interface

Fluke 725 Martel

Model: Model: 321

Multifunction Process Calibrator Calibrator
• Small, streamlined shape, rugged, reliable
• Two isolated, stainless steel, pressure
design stands up to field use sensors with 0.025% F.S. accuracy (one
• Easy to read measure/source screen lets on 311A)

you view input and output simultaneously • 27 available pressure ranges
• Measure volts, mA, RTDs, thermocouples,
• Temperature-compensation ensures
frequency, and Ω to test sensors and accuracy in the Ωeld applications
transmitters
• External pressure module connection
PIE supports all BetaPort-P pressure modules

Model: 820 Yokogawa

Calibrator Model: CA700
• Pocket sized calibrator replaces toolbox of
Portable Pressure Calibrator
single function devices
• Milliamp / Voltage / Frequency The CA700 Pressure Calibrator has a
• Thermocouples / RTDs / Check Continuity basic accuracy of 0.01% of reading on
pressure measurement and 0.015%
Yokogawa of reading on Current/Voltage source/
measurement, which makes it the most
Model: CA150/SP1 accurate calibrator in the portable
calibrator class. The CA700 also has the
Calibrator highest resolution and widest range of
• Highly accurate within 0.02% of the DC any hand held portable in its class.

voltage range for source and measure. Altek Calibrator
• Source and measurement can be
Model: 311A
performed simultaneously.
• Vertical type with large-screen display.Loop Universal RTD Calibrator

power supply function (24 VDC at a load of • Simulate RTDs and Smart transmitters,
up to 22 mA) works with a wide variety of models
• It is possible to measure current in the mA including Rosemount 3144 and Honeywell
STT series universal compatibility with all
pulsed excitation devices like PLCs and
recorders

• Resolution to 0.1 °C or °F and to 0.01

32 www.TechnicalDiagnostic.com

Temperature Calibrators (cont’d) Fluke Instrumentation and Controls

Ametek Model: 724

Model: ITC 650A Calibrator
• Easy to read dual display lets you view input
Dry Block Calibrator
• Three temperature ranges and output simultaneously
• Fast heating time • Measure RTDs, thermocouples, Ω, and
• Fast one-key, one-function access to
volts to test sensors and transmitters
automatic switch test and auto stepping • Source/simulate thermocouples, RTDs,
• Audio and Visual stability indication
• Deep immersion versions available volts, and Ω to calibrate transmitters

Fluke Fluke

Model: 7102 Model: 9009

Liquid Bath Calibrator Dual Block Calibrator -15 TO 350C
• World is smallest portable calibration baths The Model 9009 includes two
• Calibrates sensors of any size or shape independently controlled temperature
• Stability to ±0.015 °C at -5 °C blocks. The hot block provides
• Ranges from -5 °C to 125 °C temperatures from 50°C to 350°C, while the
cold block covers the range -15°C to 110°C.
Fluke Each block is controlled by a precision Hart
Scientific temperature controller
Model: 9103
Fluke
Field Dry-Well Calibrator
• Covers below-ambient temperatures as low Model: 9150

as -25 °C and up to 140 °C Dry Block Furnace
• RS-232 and Fluke Interface-it software • Hart Scientific Dry Block Calibrator Furnace

included 1200∫C
• Accuracy to ±.25 °C • Low-Cost Thermocouple Furnace
• Easy to recalibrate • Best Stability and Accuracy
• Temperature Range: 150-1200°C (302-
Fluke
2192°F)
Model: 9141
Fluke
Field Dry-Well Calibrator
• The heating and cooling rate is adjustable Model: 9102S

from the front panel, thermal switches Calibrator
can be checked for actuation testing, and • Smallest dry-wells in the world
multiple-hole inserts are available for a • Ranges from -10°C to 375°C
variety of probe sizes • Accuracy to ±0.25°C, stability of ±0.05°C
• It does calibrations up to 650 °C and heats
up to 650 °C in only 12 minutes at 0°C
• RS-232 interface with 9930 Interface-it
Fluke
v3.81 software
Model: 9100S
Martel
Hand-held Dry-Well Calibrator
• Ranges from -10°C to 375°C Model: PTC-8001
• Accuracy to ±0.25°C, stability of ±0.05°C
RTD & Thermocouple Calibrator
at 0°C • Works with Rosemount 3144 and all other
• RS-232 interface with Fluke interface-it
smart transmitters
software • 10 thermocouple types and 8 RTD types

including PT 385 (1,000 Ohm) and Cu (10
Ohm)

(817) 465 - 9494 [email protected] 33

Instrumentation and Controls Temperature Calibrators (cont’d) Techne

Martel Model: TECAL 425

Model: TC-100 Dry-Block Calibrator

Thermocouple Calibrator • Housed in rugged case for field use
• Provides high accuracy source • RS-232 computer interface for data and

and measurement of ten common program transfer, or real time control
thermocouples as well as mV • High accuracy and stabililty for certifying
• MIN/MAX recall in measure mode, three
setpoints for each T/C type temperature sensors and hydraulic
• Accepts both T/C Mini-plug and bare T/C thermostats
wires • Range: 20°C above ambient to 425°C
• Input Protection to 240 VAC
Transcat
PIE
Model: 4363T
Model: 211
RTD Calibrator
Multiple RTD Calibrator
• Automatically detect 2, 3 & 4 wire • Also refered to as Altek 211
• Simulate all your RTD Inputs
connections • Transmitters, recorders, controllers, alarms,
• Troubleshoot sensor connections and find
indicators, process data acquistion and
broken wires computer systems using two-three-four-
• Faster calibrations, instantly select three wire hook-ups.
• Built-In RTD Thermometer
outputs with EZ-CHECK switch

PIE

Model: 311

Universal RTD Calibrator
• Works with Rosemount 3144 and all other

smart transmitters
• 10 thermocouple types and 8 RTD types

including PT 385 (1,000 Ohm) and Cu (10
Ohm)

34 PIE

Model: 322

Four Thermocouple Calibrator
• Source and read for T/C types plus mV. J,

K, T, E
• -13.00 to 80.00 mV
• Easy to read display
• Double click knob to select T/C type and F

& C degrees

PIE

Model: 422

Thermocouple Calibrator
• Source and Read 4 or 14 T/C Types plus

mV (two models to choose from)
• J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U

(T DIN) & P (Platinel); -13.000 to 80.000
mV
• Resolution of 0.1°F & C; Accurate to 0.2°
• Double click knob to select T/C type and
°F & °C

www.TechnicalDiagnostic.com

Temperature Calibrators (cont’d) Amprobe Instrumentation and Controls

Transcat Model: ACD-6 TRMS PRO

Model: 5086T Clamp Meter
• Auto and manual ranging
Thermocouple Calibrator • Relative zero mode
• Sources/Reads 14 T/C types: J, K, T, E, R, • Large easy to read LCD display
• Tests Diode
S, B, N, C, G, P, L, U, & mV • Audible continuity
• ±(0.008% of reading + 0.006mV) accuracy • Accommodates conductors up to 1.77-in
• Single rotary knob provies rapid coarse &
(45mm) in diameter
fine output adjustment
• Three point quick-check switch Amprobe
• 0.1°/1°& 0.001mV Resolutions
Model: LH41A
Transcat
Clamp Meter
Model: 5102 RTC • Analog display
• 1 jaw standard, 2 on 1000A models
T/C and RTC Calibrator
• Read and simulate T/Cs and RTDs Extech
• Calibration and point memory
• High accuracy and resolution Model: 38389
• Miniature T/C input, output
• Improved excitation current span Clamp Meter
• True RMS AC Current to 600A
Clamp-ons Yokogawa • 3% basic AC accuracy
• 1.25 jaw opening
Model: CA12E-2 • Measures AC current, AC/DC voltage and

Temperature Calibrator resistance
• Signal source: TC (10 kinds), RTD, DC100
Extech
mV, 4000
• Measurement: TC (10 kinds), RTD, DC100 Model: 380926

mV, 4000 AC/DC Clamp Meter
• Features: Selectable RTD (Pt100 or • Dual Hall-effect sensors provide 2% DC

JPt100), Built-in RJC accuracy
• Options: CA12E-2 Includes rubber boot, • Peak load for in-rush currents
• Zero adjustment improves DC accuracy
strap and accessory case • Data hold

AEMC Extech

Model: 514 Model: 380942

Clamp-on Meter DMM Clamp Meter
• Standard size, full function clamp-on meter • Low AC/DC Current measurements with
• 1000A AC/DC current measurements
• 750VAC/1000VDC volt measurements high resolution to 0.1mA AC and 1mA DC
• TRMS measurements • Voltage measurements using test leads
• Resistance measurement to 4000Ω • Fast 40 segment bargraph
• Continuity with beeper below 40Ω • One touch Auto Zero for DC Current
• Frequency measurements from V and A
measurements
AEMC • Min/Max, Data hold and Auto power off

Model: MR411 [email protected] 35

Current Probe
• Measurement range of 400AAC/600ADC
• ConformΩ to IEC1010, 600V, Cat. III
• Low-phase shift for power measurements
• Designed for DMMs, recorders,

oscilloscopes, power and harmonic meters

(817) 465 - 9494

Instrumentation and Controls Clamp-ons (cont’d) Fluke

Extech Model: i5s

Model: EX810 AC Current Clamp
• Nominal current range: 5 A
AC Clamp Meter • Continuous current range: 10 mA to 6 A
• Non-contact InfraRed Temperature • Maximum Non-Destructive Current: 70 A
• Lowest measurable current: 10 mA
measurements with laser pointer • Basic Accuracy: 48 Hz to 65 Hz;10 mΩ to 1
• Peak hold captures inrush currents and
A; 1% + 5 mA; 1 A to 5 A 1%
transients • Useable frequency: 40 Hz to 5 kHz
• MultiMeter functions include AC/DC
Fluke
Voltage, AC Current, Resistance,
• Capacitance, Frequency, Diode, and Model: 330 Series

Continuity Clamp Meter
• Auto shut-off maximizes battery life so
Fluke
themeter works when you need it
Model: 353 • Small body and jaws fit perfectly in your

True-RMS Digital Clamp Meter hand and into tight places
• Measures up to 2000 Amps • Improved low current measurement
• Extra-wide jaw easily clamps around
• large conductors, typically found in high- accuracy from new microprocessor
technology
current applications • Meter controls are positioned so current

Fluke Fluke

Model: 376 Model: 80i-110s

TRMS AC/DC Clamp Meter AC Current Clamp
• 1000 Amps AC/DC current measurement • Designed to provide you with safe, high
• iFlex flexible current probe measures to
accuracy measurements for a wide range
2500 Amps AC of applications
• Integrated low pass filter • Specially designed built-in safety features
such as the 600 V RMS rating at the input
Fluke jaws, output cable and BNC connector
enhance work safety in industrial
Model: 771
Fluke
Milliamp Process Clamp Meter
• Measure MA signals for PLC and control Model: 80i-400

system analog I/O AC Current Clamp
• Measure 4 to 20 mA output signals from • Clamp-on AC current probe designed to

transmitters without breaking the loop extend the current measuring capability of
• Detachable clamp with extension cable for an AC current meter to 400 amperes
• Compatible with a DMM that accepts 4mm
measurements in tight locations shrouded banana plugs and has an AC
milliamp range
Fluke • Division ratio to 1000: 1

Model: i2000 Fluke

Flexible Current Probe Model: 80i-600A
• Flexible AC current probe for oscilloscopes
AC/DC Current Clamp
and digital multimeters • Measures AC current from 1A to 600A
• Recommended for current measurement • Output to meter is 1mA/amp AC
• Division ratio to 1000: 1
on large and difficult to reach conductors or • Maximum conductor size 2 (50mm) in
grouped cables
diameter
• Accuracy: 2%, 50Hz to 1kHz, 3% (typical)
• 30Hz to 50 Hz or 1kHz to 10kHz

36 www.TechnicalDiagnostic.com

Hioki’s PW6001 is
the “Rolls-Royce”
of Power Analyzers

Perfection at its best!
With ±0.02% accuracy, it
achieves true power analysis.

High Accuracy,Wideband, High Stability. The Hioki PW6001 combines the 3 important elements of
power measurement and basic performance backed by advanced technology to achieve unsurpassed
power analysis. TrueHD 18-bit converter measures widely fluctuating loads with extreme accuracy.

√ Automotive √ Aeronautics √ Railroads √ Trains
√ Motor Analysis √ Solar Power √ Refineries √ Utility Substations

Over 80 Years of Meeting Your Needs!

6 Corporate Drive, Cranbury, New Jersey [email protected] 37
PHONE: 609.409-9109 • FAX: 609.409-9108

w w w8. h1i7o/4k i6u5s-a9.4c9o4m

Instrumentation and Controls Clamp-ons (cont’d) Hioki

Fluke Model: 3280-10

Model: i1000s Clamp-on Meter
• Easy operation
Large AC Current Probe • 1000 Amp rms, clamp aperature: 33 mm
• The Fluke i1000s is a clamp-on AC current • Light 100g (3.5oz) & Slim 16mm
• Independent-opening double-level design
probe designed to expand oscilloscope in • Easy clamping in narrow conductors
industrial and power environments • No metal exposure, ensuring enhanced
• The current probe is ideal for measuring
distorted current waveforms and harmonics safety

Fluke Megger

Model: i1010 Model: 1000-762

AC/DC Current Clamp Digital Clamp
• Battery-powered Hall-effect clamp-on • CATIV 600V applications Insulation testing

probe to 1000V and to 200G
• Measures AC current to 600A, DC current • TRMS and DC Voltage measurement

to 1000A Continuity testing at 200mA down to 0.01
• Output is 1mV per amp DC or AC • Analog and dual digital display Insulation
• Maximum conductor size: one-1.18 (30mm)
and continuity limit alarms PI/DAR and
or two-0.98 (25mm) Timer function Test results

Fluke Yokogawa

Model: i410 Model: CL150

AC/DC Current Clamp Process Clamp On Meter
• Battery-powered Hall-effect clamp-on • AC current measurement with current

probe ranges up to 2000A
• Measures AC current to 600A, DC current • AC/DC voltage and resistance

to 1000A measurements
• Output is 1mV per amp DC or AC • 54mm in diameter of measurable conductor
• Maximum conductor size: one-1.18 (30mm) • Mean value display
• DC output function
or two-0.98 (25mm)
Yokogawa
Fluke
Model: CL420
Model: i200
Process Clamp On Meter
AC Current Clamp • 0.2% Accuracy, 0.01mA Resolution
• Measuring range:0.5 to 240 amps AC • Dual Display
• The output signal is 1 mA/A • LED Torch Light, Backlight Display
• Safety shrouded banana plugs for use with • Analog Output Available

DMMs or any other current measuring
device which has banana inputs

Hioki Yokogawa

Model: 3282 Model: CW10

Clamp Meter Power Meter

• Wave peak valve, waveform distortion The CW10 is more like a tester type rather
check than a recorder, which can measure
single phase AC and DC Power, Voltage,
• Auto-power off to prevent the power from Currents, Power Factor, Frequency,
being left on Harmonics. It will also contribute to workers
maintenance of not only consuming
• Non-fuse type protects up to 600 V AC equipment but equipment for renewable
energy such as solar and wind power
• 1000 Amps AC 0 46mm generation.

• Protected circuits for ratings up to 600 V AC

38 www.TechnicalDiagnostic.com

Decade Boxes Signal Crafters Instrumentation and Controls

General Radio Model: 90

Model: 1432-Q High Level VLF Signal Source

Prime Technologies • Operates in the very low frequency range of
0.100 kHz to 500 kHz
• HARS Series
• High accuracy and stabililty • Has ten user-preset MEMORY registers
• Low temperature co-efficient
• Low zero resistance • Synch Input/Output Level: TTl level/3.75 V
behind 100 Ω

IET Labs Power Supply

Model: HARS-X Keysight

High Accuracy Resistance Substituter Model: 6010A

Single decade units are available with Auto-ranging DC Power Supply
resistance as low as 1mΩ per step to as
high as 10MΩ per step. These units satisfy • Constant voltage and constant current
many system applications requiring only operation
a single decade while maintaining all the
quality features of the HARS Series. • Output: 0 to 200V, 0 to 17A

• Max power: 1200W

• Auto-ranging output: V1, l1: 200V, 5A, V2,
I2:120V, 10A, V3, I3: 60V, 17A

Prime Technologies Keysight

Model: RTD-100 Model: 6622A

Resistance Decade Box 80 Watt Power Supply
• 10.000 to 1111.110 Ω • GPIB programming of voltage and current
• Supports two, three, and four-wire Hookups • Measured voltage and current readback
• 0.01% Absolute accuracy
• Switches rated for more than 100,000 over the GPIB
• 2 outputs can be connected in parallel or
Operations
in series
Signal Crafters • Automatic selections of operating voltage

Model: 60 and current range

Impedance Magnitude Meter Keysight
• Impedence Magnitude: 10Ω to 40,000 Ω
• Frequency Range: 30 kHz to 500 kHz Model: 6645A
• Test Load Drive Voltage: 10 Vrms
• Signal Source Requirements: (Frequency: 200 Watt Power Supply
• Auto-parallel up to three units
30 kHz to 500 kHz, Voltage level: 10Vrms, • Outputs can be connected in parallel or in
Level meter: output voltage, Output Z:50
Ω or less) series
• Discrete fault indicator/remote inhibit
Signal Crafters • Self-test occurs at power on from a GPIB

Model: 70 command
• 0 to 120 VDC & 0 to 1.5A
Computing Power/SWR Meter
• Frequency: 40kHz to 500 kHz Magna Engineering
• Fuse protection: 2A between input and
Model: PS-10/600
output
• Scales: 0-5 watts and 0-15 watts Portable Power Supply
• Front Panel Switches: four position rotary • Adjustable AC/DC power supply
• 3 Switchable voltage ranges
type • Up to 10 Amps output AC or DC
• Two position toggle switch • Aux. DC outputs: 12, 24, 48V
• Vernier to fine-tune output voltage
• Polarity test function
• Outputs fuse-protected for safety

(817) 465 - 9494 [email protected] 39

Instrumentation and Controls Power Supply (cont’d) Meriam

Martel Model: A0030P

Model: 3323E Digital Manometer
• Leak testing for low pressure gas systems
24V DC Loop Power Supply • Pressure drop monitoring across filters
• Provides 24V DC powered two-wire • Monitoring vacuum on condensers or

transmitters or loop-powered meters pumps
• Drives single or multiple (up to 8) 4-20 mA • Verification of CPAP or BIPAP systems for

loops home or hospital settings
• Also powers other 24V DC instruments
• 0.175A current output, user-configurable Meriam

115V or 230V AC power, 1500V isolation, Model: D0200IW
current-limited
Manometer
Martel • Test currents from 10 A to 200 A DC
• Filtered direct current output eliminates
Model: MEC-1000
magnetic transients
24-Volt Linear Power Supply • Up to 0.1 µ resolution
• A cost effective 24V linear power supply • On board memory for up to 300 test results

that provides 24V power to drive up to fifty, and notes
4-20mA process current loops, or power • RS232 port to download stored results via a
transducers, display devices and other
instruments Meriam
• Features: 1 amp output current, user
selectable 120VAC or 220VAC power Model: D1000IW

Transcat Manometer
• Aluminum channel body with connected
Model: 21050E
stainless steel and blocks
Portable Power Supply • Type 304SS wetted parts
• Battery powered 24V loop power supply • Should excessive pressures cause an
• Simplify your field calibrations
• Regulated 24V loop power indicating tube to fracture, t ransparent
• 3.8 x 2.4 x 9 weighs 3.6 oz. cover seals the unit from dust and moisture
and protects operator
Manometer Transcat
Meriam
Model: 23244E
Model: DP2000I
Triple DC Power Supply
Digital Manometer
• Continuously variable output with course & • Inches H20: 2000
fine controls • Cm in H20: 5080
• PSIG: 72.10
• Selectable constant voltage or constant • Inches Hg: 146.8
current modes • Mn Hg: 3730
• Kg/cm2: 5.070
• Heavy-duty, transformer-isolated design • kPa: 497.0
• Dual three-digit displays indicate actual
Meriam
output
Model: M100
Meriam
Manometer
Model: 40AM10-E111 • Leak testing for low pressure gas systems
• Pressure drop monitoring across filters
Inclined Manometer • Monitoring vacuum on condensers or

• Aluminum channel body with connected pumps
stainless steel and blocks • Verification of CPAP or BIPAP systems for

• Type 304SS wetted parts home or hospital settings
• Transparent cover seals the unit from dust

and moisture and protects operator should
excessive pressures cause an indicating
tube to fracture

40 www.TechnicalDiagnostic.com

Manometer

Meriam Meriam Instrumentation and Controls

Model: M200-GI0050 Model: V3900 Series

Manometer Digital Gauge
• Measures ranges are available to 6,000
• NIST traceable accuracy +0.05% Full Scale • P516 at a standard accuracy of +/- 0.25%
• Recalibration can be done at any time using
• Pressure sensors for measuring gauge
pressure (0 to 50 PSI Gauge) an accurate standard pressure reference
• Capture and display pressure extremes
• Engineering Units: Inches of H2O (select
4 C, 20 C, 60 F), PSI, mm of Hg, inches of Transcat
Hg, mBars, Bars, kPa, kg/cm2
Model: 23300P-XXXX Series
Pressure Gauges
Digital Test Gauge
Martel • 10 selectable engineering units
• ±0.25% accuracy
Model: Beta Gauge • Vacuum to 10,000 psi
• Compound VAC to 15 psi
Beta Gauge • Min/Max recall
• Over/under range indication
• Ease of use • Zero adjustment
• Pressure Ranges: 500, 5000, 100, 1000,
• 10k, PI-15-CV, PI-300, PI-2000

Martel GE Druck

Model: PI-Pro Model: DPI 740

Beta Gauge Precision Barometer
• Ease of use
• Pressure Ranges: 500, 5000, 100, 1000, • Range: 22 to 34 Hg absolute pressure
• 10k, PI-15-CV, PI-300, PI-2000
• Model shown with optional handpump • Improved -0.02% FS accuracy

Martel • Six-digit resolution

Model: PI-300 • Selectable pressure units

Digital Test Gauge • RS-232 output
• Accuracy of ±0.05% of F. S.
• Temperature compensated accuracy over • Portable, hand-held design

0 to 50 °C Pressure Modules
• 13 standard pressure ranges available
• Displays in 18 standard or 1 custom Fluke

engineering unit Model: 700PD2
• Displays ambient temperature in °C or °F
Module

• Rugged urethane molded case protects
the module from rough handling and harsh
conditions

• Features internal temperature
compensation from 0°C to 50°C for full-
accuracy performance

• Includes NIST-traceable calibration
certificate

Martel Fluke

Model: PI-500 Model: 700PD3

Digital Test Gauge Module

• Accuracy of ±0.05% of F. S. • Rugged urethane molded case protects
the module from rough handling and harsh
• Temperature compensated accuracy over conditions
0 to 50 °C
• Features internal temperature
• 13 standard pressure ranges available compensation from 0°C to 50°C for full-
accuracy performance
• Displays in 18 standard or 1 custom
engineering unit • Includes NIST-traceable calibration
certificate
• Displays ambient temperature in °C or °F

(817) 465 - 9494 [email protected] 41

Instrumentation and Controls Pressure Modules (cont’d) Martel

Fluke Model: MECP-500

Model: 700PD4 Pneumatic Hand Pump
• Supplied with hose & fitting
Module • One-button selection of pressure/ vacuum
• Pressure to 30 psi and vacuum to -25Hg
• Rugged urethane molded case protects • Precision vernier adjustment (0.00145 psi
the module from rough handling and harsh
conditions sensitivity)
• Pressure relief valve may be set from 20
• Features internal temperature
compensation from 0°C to 50°C for full- H20 to 30 psi
accuracy performance
Meriam
• Includes NIST-traceable calibration
certificate Model: B34686

Fluke Hand Pump
• MV-100 0-28Hg (depends on barometric
Model: 700PD5
pressure)
Module • MP-100 0 to 100 psi (including and not

• Rugged urethane molded case protects limited to an inch of water)
the module from rough handling and harsh • Connections (2 ports) 1/8 inch NPT
conditions • Weight 1.5lbs
• 2ft hose and 1/4 inch fitting
• Features internal temperature
compensation from 0°C to 50°C for full- Meriam
accuracy performance
Model: HT10-KT
• Includes NIST-traceable calibration
certificate Hydraulic Hand Pump
0 - 10,000 psi (700 Bar)Compatible
Fluke with most hydraulic fluids, oils and
waterConnections (2 ports) 1/4 inch NPT/
Model: 700 Series BSP

Pressure Module Meriam

• Calibrate any pressure device Model: MH10-KT

• Complete your calibration package with one PSI Pneumatic Handpump
or more of these 29 pressure modules • 0 - 10,000 psi (700 Bar)
• Compatible with most hydraulic fluids, oils
• Temperature Compensated Accuracy
and water
• Use with 741, 743, 702, 718, 725, 744, 701 • Connections (2 ports) 1/4 inch NPT/BSP

Pumps Meriam

Ametek Model: MH10-KT

Model: T-620 PSI Pneumatic Handpump
• 0 - 10,000 psi (700 Bar)
Hydraulic Pump Calibration • Compatible with most hydraulic fluids, oils

• Supplied with hose & fitting and water
• Connections (2 ports) 1/4 inch NPT/BSP
• One-button selection of pressure/ vacuum

• Pressure to 30 psi and vacuum to -25Hg

• Precision vernier adjustment (0.00145 psi
sensitivity)

• Pressure relief valve may be set from 20
H20 to 30 psi

Fluke

Model: 700PTP1

Hand Pump

• Pump can be easily cleaned without
disassembly

• The vernier can be used as a stand-alone
low pressure calibration source

• Two pressure ports allowing simultaneous
connection:

• º in NPT female fitting for the reference
gauge or pressure module

42 www.TechnicalDiagnostic.com

Pumps (cont’d) Transcat Instrumentation and Controls

Meriam Model: 23620P

Model: MH-600 Low Pressure and Vacuum Test Pump

Hydraulic Hand Pump • Two outlet ports for connection to reference
and device under test
• Vacuum 28 Hg to pressure 600psi
(combination pump) • High precision fine adjust vernier with
0.00145 PSI resolution
• Compatible with all gauges and calibrators
• Connections (2 ports) 1/4 inch and 1/8 inch • User-adjustable pressure relief valve

NPT/BSPan • Switches between vacuum and pressure at
the push of a button

Meriam Transmation, Inc.

Model: MP-100KT Model: 23614P

Calibration Pump Hydraulic Pump Calibration

• MV-100 0-28Hg (depends on barometric • Use with Water or Oil
pressure)
• Stainless Steel & Glass Construction - No
• MP-100 0 to 100 psi (including and not Leaks or Runs
limited to an inch of water)
• Fast High-Pressure Priming
• Connections (2 ports) 1/8 inch NPT

• Weight 1.5lbs

• 2ft hose and 1/4 inch fitting

Ralston Transmation, Inc.

Model: HPGV-0000 Model: 23622P

Pneumatic Hand Pump Hand Pump

• 3000 psi (210 bar) HPGV pump • -28.5-in Hg to 600 PSI in a single pump

• Supplied with hose & fitting • Precision vernier and vent controls

• One-button selection of pressure/ vacuum • Easy to pump

• Pressure to 30 psi and vacuum to -25Hg • Switch between Vacuum & Pressure with a
push of a button
• Precision vernier adjustment (0.00145 psi
sensitivity) • Designed to endure harsh environments

• Superior pumping action

Ralston Transmation, Inc.

Model: XHGV-0000 Model: 6215P

Pneumatic Hand Pump Hand Pump
• 5000 psi (350 bar) XHGV pump
• Supplied with hose & fitting • Low pressure pump
• One-button selection of pressure/ vacuum
• Pressure to 30 psi and vacuum to -25Hg • Generates up to 145 psi on a dead-end
• Precision vernier adjustment (0.00145 psi circuit

sensitivity) • Features a vernier adjustment knob for
fine-tuning
Taylor
• Includes a manually controlled bleed valve
Model: 44S369 for controlling venting

Squeeze Bulb Communicators
• Pressure Calibrator with carrying case
• Dial marked for 0 to 160” of water (metric Emerson

equivalent is 0-40 k Pa) Model: 475
• 1.75” dial with white on black graphics
• Bright red tipped pointer for easy reading Field

• Universal- HART and FOUNDATIONô field
bus

• User upgradeable

• Rugged and reliable

• Interfaces with AMS

(817) 465 - 9494 [email protected] 43

Instrumentation and Controls Communicators (cont’d) IR Thermometers

Honeywell Extech

Model: STS103 Model: 42545

Smart Field Communicator High Temperature IR Thermometer

The hand-held field communicator is a • Highest 50 to 1 distance to target ratio
battery powered device which establishes measures smaller surface areas at greater
secure two-way communications distances
between Honeywell Smart Transmitters
& user over the existing signal lines. The • Widest Temperature range from -58 to
SFC is extremely useful for simplifying 1832°F (-50 to 1000°C)
maintenance.
• MIN/MAX/AVG/DIF features display
highest, lowest, average, and MAX minus
MIN values

Meriam Fluke

Model: MFC 4100 Model: 572

Communicator IR Thermometer

A fully functional HART communicator • Measure -30 °C to 900 °C (-22 °F to 1652
supporting universal, common practice and °F)
device specific commandsfor comissioning,
configuration and maintenance operations. • 60:1 distance to spot ratio with dual laser
Dedicated memory for 600 HART device sighting for fast, accurate targeting
profiles
• Multi-lanGauge interface (user select)
Yokogawa • Current Temperature plus MAX, MIN, DIF,

Model: YHC5150X AVG temperature displays

Communicator Thermal Imaging

• Reads manufacturers’ DDs in their native Flir
format without the need for translations
Model: ThermaCAM E25
• HART®-compliant modem communicates
with any registered or unregistered HART® Thermal Imager
Device
• Built tough for hard work in field and all
• Features an ergonomic, handheld design weather conditions
• Enhanced 4.3” diagonal anti-glare screen
• Stores up-to 100 images
Digital Thermometers • Built-in laser locator allows you to associate

Extech the IR image with the physical target
• Light weight, long-life battery
Model: EA15
Fluke
Thermocouple Data Logger
Model: Ti20
• Accepts types: J, K, E, T, R, S, & N
thermocouples Thermal Imager

• Built in datalogger stores up to 8800 data • Fully radiometric for detailed temperature
sets analysis and tracking of critical components

• Timer function displays elapsed time plus • Clear thermal image with accurate
the time when Min and Max readings are temperature measurements up-to 350°C
taken (662°F)

• Clear on-screen step-by-step routing
instructions

• Provides 3-hours of continuous operation

Extech Fluke

Model: RH520A Model: Ti25

Humidity and Temperature Recorder Thermal Imager

• Simultaneous numerical and graphical • Optimized for field work in harsh work
display of Humidity and Temperature environments
readings
• Intuitive, three-button menu is easy to use
• Internal memory records up to 49,000 data simply navigate with a push of a thumb
points and can be transferred to a PC via
RS-232 port • Engineered and tested to withstand a 2m
(6.5ft) drop

• Voice annotations-record findings by
speaking into the camera

44 www.TechnicalDiagnostic.com

Thermal Imaging (cont’d) Hioki Instrumentation and Controls

Fluke Model: 3169-20-01/5000

Model: Ti32 Clamp-on Meter DMM

Thermal Imager • Simultaneously measure demand and
harmonic waveforms that share the same
• Has a 160 x 120 detector and a temperature voltage line over 4-circuits
sensitivity of 0.08 °C (NETD)
• Save data to a PC cardHigh-speed
• High resolution images where even the and continuous processing to measure
smallest temperature differences can be individual waveforms
seen
• High-speed D/A output for analog graph
• Features IR-Fusion recording

Fluke Astromed

Model: Ti50FT Model: DASH 18

IR FlexCam Thermal Imagers 18 Channel One-touch chart Recorder

• All FT models feature the innovative IR- • 18 Universal input channels
Fusion technology. IR-Fusion captures a
visible light image in addition to the infrared • Stream directly to hard drive at 100kHz per
image and takes the mystery out of IR channel
image analysis. It helps to better identify
and report suspect components and enable • 15.4 touchscreen display
the repair to be done right the first time.
• Record waveform, audio and video
snapshots

Fluke Oscilloscopes

Model: TI400 AEMC

IR Camera Model: OX-704-CK

• Consistently in-focus images with the Portable Oscilloscope
exclusive LaserSharp
• 5 tools in one
• Auto Focus system • 4 isolated measurement channels
• 600V cat III
• See the crucial details needed to help • Up to 8 curves on screen
clearly identify potential problems with
precisely blended visual and infrared
images - only with IR Fusion technology
with AutoBlendô mode.

Fluke Hioki

Model: TiX560 Model: MR8847

IR Camera Data Acquisition
• Choice of memory capacity from 64-Mega
• Easily navigate over, under and around
objects with the 180° articulating lens and word (-01 model) to 512-Mega word (-03
see the image before you capture it model)

• Capture images with the only 5.7 inch • High-speed sampling with waveform
responsive touchscreen LCD with on- judgment function
camera analytics for in-field image analysis
• High-speed sampling up to 20MS/s with
• Save time with post-capture image fully isolated inputs

Hioki • 16 analog + 16 logic channels to 64 logic +
10 analog
Model: 3169-20
Hioki
Power Demand Analyzer
Model: MR8875
• Measure Power Lines of Up to Four
Systems (with a common voltage) Data Acquisition

• Measure Power Lines of Up to Four • 1000V input and instantaneous DC or RMS
Systems (with a common voltage) waveform measurement with new Analog
Unit MR8905
• A Wide Range of Measurement Functions
• Equipped with ranges from 5 A to 5000 A • Measure multiple channels simultaneously
despite handheld portable design

• Max. 2 Ωsec high-speed simultaneous
logging for all input channels

(817) 465 - 9494 [email protected] 45

Instrumentation and Controls Energy Analyzers Power Analyzers

Summit Technology AEMC

Model: PS3000 Model: 8336

Energy Analyzer Three-Phase Power Quality Analyzer

• Complete power/energy/cost analysis. • Measurement of TRMS voltages up to
Measures voltage, current, KW, KVA, 1000Vrms AD/DC for two-, three-, four- or
KVAR, true power factor, displacement five-wire systems
power factor, KWH, elapsed and estimated
cost, and duty cycle. Complete logging and • Measurement of TRMS currents up to
manual waveform capture ability 10kArms (sensor dependent)

• Compatibility with any power system • Measures up to 5000ADC with the AC/DC
Current Probe Model J93

Summit Technology AEMC

Model: PS4500 Model: 3945-B

Energy Analyzer Powerpad Power Quality Analyzer

• Measures: RMvvS volts, RMS amps, • True RMS single, two and three phase
watts, energy kWh, enery cost, VA, VAR, measurements at 256 sample/cycle plus
true power factor, Hz, THD to the 63rd DC
harmonic, duty cycle
• Real-time color waveforms
• Can use it on single-phase or three-phase
circuits and loads It is CAT IV safety rated • Measure DC volts, amps and power

• Bluetooth compatibility • Nominal frequency from 40Hz to 70Hz

NPoEwWer &AENneDrgIyMDaPtaRLOogVgEerDs

®

Satisfies Requirements
For Article 220.87

Available With an Android™ App
• Configure measurements and recordings

• Display data in real-time

DataView® Software Features • For use on any device with an Android platform

• Configure real-time communication Available With a
with a PC Power by Phase Adapter

• Report generation with pre-defined
and user defined templates

• For PEL 102 & PEL 103

Available With a Hall Effect • Powers from phase to neutral
AC/DC Current Probe J93 or phase to phase

• Measures DC current up to 5000A • Provides isolation between
measurement and instrument power

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments www.pel100.us • www.aemc.com
200 Foxborough Blvd., Foxborough, MA 02035 USA
Phone: (800) 343-1391 • Fax: (508) 698-2118 IP
R5at4ed
©Copyright 2015, Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

46 www.TechnicalDiagnostic.com

Power Analyzers (cont’d) Hioki Power Quality

Fluke Model: MR8880-20

Model: 41B-43B Recorder
• CAT III 600V isolation performance; directly
Power Quality Analyzer
• Combines capability of a power quality measure a 480V power line
• 4 completely isolated channels let you
analyzer, multimeter and scope
• Calculates 3-phase power on balanced simultaneously record data on a 3-phase
power line plus have one extra channel
loads • Tough against harsh environments; -10°C to
• Measures power harmonics and captures 50°C operating temperature range

voltage SAGS, transients and in-rush Hioki
current
Model: PW3198
Fluke
Clamp-on Meter Power Meters
Model: 434 Series II • Verify power problems in accordance with

Energy Analyzer the IEC61000-4-30 Class A standard
• Energy monetization - calculate the fiscal • High accuracy and continuous gapless

cost of energy waste due to poor power recording(V: ±0.1% of nominal voltage, A
quality and W: ±0.2% rdg. ±0.1% f.s.)
• Energy assessment - quantify the before • CAT IV 600V - safe enough for incoming
and after installation improvements in power lines
energy consumption to justify energy • Broadband voltage
saving devices
• Frontline troubleshooting Hioki

Fluke Model: PW3198-90

Model: 435 Series II Power Quality Analyzer
• Verify power problems in accordance with
Power Quality and Energy Analyzer
• Automatic Trending: Every measurement the IEC61000-4-30 Class A standard
• High accuracy and continuous gapless
is always automatically recorded, without
any set-up. recording
• System-Monitor: Ten power quality • (V: ±0.1% of nominal voltage, A and W:
parameters on one screen according to
EN50160 power quality standard. ±0.2% rdg. ±0.1% f.s.)
• Logger function: Configure for any test • CAT IV 600V - safe enough for incoming
condition
power lines
Hioki
Hioki
Model: 3193-10
Model: PW3360
Power Analyzer
• A rich assortment of measurement Clamp-on Meter Power Meters
• Supports single to three-phase, 4-wire
functions including voltage, current, power,
waveform peak value and efficiency circuits
• High-precision with basic accuracy of ±0.2 • Measure between 90V to 780V
%, high-speed response of 0.1 s • Simultaneously measure up to three single-
• Measure up to six circuits simultaneously
phase, 2-wire circuits (in the same power
Hioki system)
• Slim, compact design that can be placed
Model: 3197-01/100 Pro anywhere

Power Quality Analyzer Hioki
The 3197 PQA model is manufactured
by Hioki, and is a portable PQA that is Model: PW3365
ideal for use in regulating inrush currents,
voltage swells, voltage dips, transient over- Clamp-on Meter Power Meters
voltages, and as well as interruptions. • The PW3365 is dedicated voltage sensor

(817) 465 - 9494 delivers the world is first no-metal-contact
measurement.
• Supports single to three-phase, 4-wire
circuits
• Measure between 90V to 520V
• Slim, compact design that can be placed
anywhere

[email protected] 47

Power Quality Power Analyzer (cont’d) Thickness Gauges

Hioki Cygnus

Model: PW6001-01 Model: Cygnus 4

Power Analyzer Ultrasonic Thickness Gauge

• Basic accuracy of ±0.02% • Backlit LCD display for easy viewing from
bright sunlight to complete darkness
• 1 for power measurement
• Rugged, shock-proof construction
• 1 PW6001 accuracy only. Instrument
delivers accuracy of ±0.07% even after the • Sealed electronics resistant to water, dirt
current sensor accuracy has been added. and dust

• High noise resistance and stability (80 • Calibrates to a known thickness on a known
dB/100 kHz CMRR, ±0.01%/°C velocity of sound

RX Monitoring Defelsko

Model: CS Monitor Model: UTG

Power Quality Analyzer Thickness Gauge

• Real-time Clock Accuracy: +/- 1 sec / day • Precision ultrasonic transducers provide
max fast, accurate readings

• Synchronize time between Cx Monitors +/- • Large, easy-to-read, graphics LCD with
10 mSec / day multilingual support

• Internal Memory: Minimum 512Mbytes high • Solvent, acid, oil, water and dust resistant
speed NAND Flash
Air Flow Measurement
• Wireless 802.11gn Integration
Arbiter Systems Inc.
Power Logger
Model: 1062A
Amprobe
Environmental Monitor
Model: DM II PRO
• Total of 14 channels including 12
AC Paperless Datalogger/Recorder independently selectable input channels

• Voltage, Current, Power and Energy • Provides ability to correlate test failures
with changes in environmental conditions.
• Four voltages and four current channels
• Built in real time clock
• Single or three-phase capability; 2-, 3-, or
4-wire

• Includes software for display, analysis, and
reporting

Flow Meter

Fluke Dynasonic

Model: 1735 Model: 902

Three-Phase Power Logger Doppler Ultrasonic Flowmeter

• Load studies - verify electrical system • Designed to measure the flow of liquids
capacity before adding loads that contain sounds reflectors - suspended
solids or gas bubbles
• Energy assessments - quantify
energy consumption before and after • Standard 4-20mA output for chart trending
improvements to justify energy saving
devices • Operates on pipes ranging from 0.25 to 120
inches

Fluke Fuji

Model: 1750 Model: FLC S1012

Three Phase Power Recorder Portable Ultrasonic Flowmeter

• 1750 acquisition unit • Portable type ultrasonic flowmeter utilizing
transit time difference for measuring flow
• ARCHOS 43 Internet Tablet rates in pipes from the outside

• 4 - 400A Current Probe (3140) • It is a compact and light-weight instrument
incorporating the latest electronics and
• 5 Test leads and clips digital signal processing technologies.

• SD memory card

• Fluke Power View and Fluke Power Analyze
software

48 www.TechnicalDiagnostic.com

TDS$Turbine$Services$

Flow Meter (cont’d) !

Mechanical Test Equipment Polysonics Oakton Instruments

Model: DCT-7088 Model: CON 10

Portable Transit Time Flowmeter/Logger pH Meter

• Accuracy to ±0.5%, flow sensitivity of 0.001 • Selectable manual or automatic
ft/s, bi-directional flow measurement temperature compensation (ATC)

• Allows for easy installation without flow • Four measurement ranges with auto-
interruption ranging for best resolution

• Ensures leak free measurements & with • Hold function; Auto-off; ready indicator
zero pressure drop
• Conductivity cell with built-in temperature
sensor included

Moisture Orion

COSA Xentaur Instrument Model: 203A

Model: XPDM pH/Temp Meter

Portable Dewpoint Meter • 2 point pH calibration

• Self contained, battery operated • Auto-calibration with choice of 3 buffers

• Dewpoint range: -148 to 68°F • pH resolution to 0.01

• Multiple engineering units • Simultaneous pH & temperature
measurement
• Self-drying sensor design
• The model 230A comes with a 3-in-one pH/
• Optional digital and analog outputs temperature probe

pH, Conductivity Meters Alignment Orion
Boroscopes
Extech Model: 250A

Model: PH110 Multi-Purpose pH Meter
• Choice of speed or accuracy with
pH Meter
• Refillable pH electrode that can be reused selectable resolution and simultaneous
display of both pH and temperature
by refilling the reference solution once it • The mV mode allows quick and easy ORP
depletes measurements
• Obtains continuous high accuracy using • Calibration is fast, easy and accurate using
fresh reference solution two-step autocalibration
• Fast and easy steps to refill your electrode
Pruftechnik
Oakton
Model: Optalign
Model: pH/CON 10 Meter
Laser Alignment
pH Meter • Alignment of non-rotatable shafts
• New, improved probe design gives faster • Start and Stop rotaion at any position
• Static measurement mode - requires any
response time
• Switch from conductivity to pH readings 3 of the 8 available 45 measurement
positions
with a button press • Live monitoring of horizontal or vertical
• Replaceable multi-sensor probe with 10 ft machine corrections

submersible cable Pruftechnik
• Dual display of conductivity (or pH) plus
Model: Rotalign
temperature
Laser Alignment
Oakton • Full VGA TFT sunlight readable color

Model: TDS 5 screen and backlit alphanumeric keyboard
• Aligns horizontal, vertical and flanged
TDS Meter
• Reads TDS and temperature mounted machines
• Automatic temperature compensation (ATC) • Aligns coupled and uncoupled shafts
• All push button operation • Aligns entire trains of up to 14 machines
• Three-point TDS calibration
• Auto-ranging for fast response

50 www.TechnicalDiagnostic.com