Base Cabinets

95

Base Cabinets

Base Cabinets

Dimensions

Width Height Depth

6” to 48” 341⁄2” 24”

(Reduced Depth optional

on select cabinets)

SKU Coding

B 30 BUTT

Cabinet Type width in inches Cabinet Type
(e.g., B=Base)

Construction Options & Modifications

APC . . . . . . . . . . . . . . . . . All Plywood Construction
CFO . . . . . . . . . . . . . . . . . . . . . . Cabinet Front Only
FE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture Ends
IF . . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted Frame
PVS . . . . . . . . . . . . . . . . . . Plywood Veneered Sides
RD . . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth
RTK . . . . . . . . . . . . . . . . . . . . . . . Recessed Toe Kick

96 Base Cabinets: Standard Base Cabinet Base Cabinet

Standard Base Cabinets No Drawer No Drawer with

Tray Divider and Shelf

TB9 ● APC TB9 TDS ● APC
● CFO ● FE
● FE ● PVS
● PVS ● RD
● RD ● RTK
Base Cabinets ● RTK

Standard Base cabinets are 34 1⁄2” high by ● No shelf ● Full height door
24” deep and range from 9” to 48” wide. ● Full height door ● Full depth adjustable shelf
● For vertical tray storage ● TD3 Cabinet Tray Divider packaged separately for
Cathedral doors are not available on ● Order S924 adjustable shelf separately
Standard Base cabinets. ● Not available with Recessed Toe Kick Both (RTKB) field installation
● Reduced depth minimum is 14”
Single door Standard Base cabinets are Option ● Not available with Recessed Toe Kick Both (RTKB)
hinged left and can be reversed in the field.
Base Pantry Pull Out Option
Inset toe kick construction requires BTK8
matching toe kick – must be ordered IFNASCTTAOLRLYED Base Tray Divider Pull Out
separately.
IFNASCTTAOLRLYED

BPP9 ● APC BTDP9 ● APC
● FE ● FE
● PVS ● PVS
● RTK ● RTK

● Standard 9” wide full height door ● Standard 9” wide full height door
● One fixed and three adjustable shelves with ● Features heavy-duty full access glides
● Tray divider is adjustable to accommodate
chrome rails
● Features three individual heavy-duty full various storage solutions
● Adjustable T-Bar included for storage customization
access glides ● Decorative hardware strongly recommended
● Decorative hardware strongly recommended ● Not available with Recessed Toe Kick Both (RTKB)
● Not available with Recessed Toe Kick Both (RTKB)
Option
Option ● Not available with CushionClose
● Not available with CushionClose

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinet Base Cabinet Base Cabinets: Standard 97

1 Door, 1 Drawer 2 Butt Doors, 1 Drawer Base Cabinet

2 Doors, 1 Drawer

B12 ● APC B24 BUTT ● APC B30 ● APC
● CFO B27 BUTT ● CFO B33 ● CFO
B15 ● FE B30 BUTT ● FE B36 1TD ● FE
B18 ● IF B33 BUTT ● IF ● IF
B21 ● PVS B36 1TD BUTT ● PVS ● PVS
B24 ● RD ● RD ● RD Base Cabinets
● RTK ● RTK ● RTK

● Full depth adjustable shelf ● B24 BUTT features full depth adjustable shelf ● Half-depth adjustable shelf
● B27 BUTT and larger feature half-depth ● Center support for shelf provided

adjustable shelf
● Center support for half-depth adjustable shelf

provided

Base Cabinet Base Cabinet

2 Doors, 2 Drawers 3 Doors, 3 Drawers

B36 ● APC B45 ● APC
● CFO ● CFO
B39 ● FE ● FE
B42 ● IF ● IF
B48 ● PVS ● PVS
● RD ● RD
● RTK ● RTK

● Half-depth adjustable shelf ● Half-depth adjustable shelf
● Center support for shelf provided ● Center support for shelf provided
● Hinged as shown – center door can be reversed in

the field

Shenandoah Cabinetry Specification Guide

98 Base Cabinets: With Accessories

Base Cabinets Base Cabinet Base Cabinet
with Accessories
1 Door, 1 Drawer 2 Butt Doors, 1 Drawer

IFNASCTTAOLRLYED 1 Deep Roll Out Tray IFNASCTTAOLRLYED 1 Deep Roll Out Tray

Base Cabinets B12 FWT ● APC B24 FWT BUTT ● APC
B15 FWT ● FE B27 FWT BUTT ● FE
B18 FWT ● PVS B30 FWT BUTT ● PVS
B21 FWT ● RD B33 FWT BUTT ● RD
B24 FWT ● RTK B36 1TD FWT BUTT ● RTK

Base cabinets with Accessories are 341⁄2” ● Deep Roll Out Tray (DROT) on floor ● Deep Roll Out Tray (DROT) on floor
high by 24” deep and range from 12” to ● Full depth adjustable shelf in center position ● Full depth adjustable shelf in center position
48” wide. ● Deep Roll Out Tray is not adjustable ● Deep Roll Out Tray is not adjustable

Cathedral doors are not available on Base Cabinet Base Cabinet
Base cabinets with Accessories.
2 Doors, 1 Drawer 2 Doors, 2 Drawers
Single door Base cabinets with
Accessories are hinged left and can be 2 Deep Roll Out Trays 2 Deep Roll Out Trays
reversed in the field.

Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.

IFNASCTTAOLRLYED IFNASCTTAOLRLYED

B30 2T ● APC B36 2T ● APC
B33 2T ● FE B39 2T ● FE
B36 2T 1TD ● PVS B42 2T ● PVS
● RD B48 2T ● RD
● RTK ● RTK

● Deep Roll Out Tray (DROT) on floor in each ● Deep Roll Out Tray (DROT) on floor in each
door opening door opening

● Full depth adjustable shelf in center position ● Full depth adjustable shelf in center position
● Deep Roll Out Trays are not adjustable ● Deep Roll Out Trays are not adjustable

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: With Accessories 99

IFNASCTTAOLRLYED Base Cabinet IFNASCTTAOLRLYED Base Cabinet Base Cabinet

3 Doors, 3 Drawers 1 Door, 1 Drawer 2 Butt Doors, 1 Drawer

3 Deep Roll Out Trays 2 Deep Roll Out Trays IFNASCTTAOLRLYED 2 Deep Roll Out Trays

B45 3T ● APC B12 2FWT ● APC B24 2FWT BUTT ● APC
● FE B15 2FWT ● FE B27 2FWT BUTT ● FE
● PVS B18 2FWT ● PVS B30 2FWT BUTT ● PVS Base Cabinets
● RD B21 2FWT ● RD B33 2FWT BUTT ● RD
● RTK B24 2FWT ● RTK B36 1TD 2FWT BUTT ● RTK

● Deep Roll Out Tray (DROT) on floor in each ● Two Deep Roll Out Trays (DROT) ● Two Deep Roll Out Trays (DROT)
door opening ● Deep Roll Out Trays are not adjustable ● Deep Roll Out Trays are not adjustable

● Full depth adjustable shelf in center position
● Deep Roll Out Trays are not adjustable
● Hinged as shown – center door can be reversed in

the field

IFNASCTTAOLRLYED Base Cabinet IFNASCTTAOLRLYED Base Cabinet IFNASCTTAOLRLYED Base Cabinet

2 Doors, 1 Drawer 2 Doors, 2 Drawers 3 Doors, 3 Drawers

4 Deep Roll Out Trays 4 Deep Roll Out Trays 6 Deep Roll Out Trays

B30 4T ● APC B36 4T ● APC B45 6T ● APC
B33 4T ● FE B39 4T ● FE ● FE
B36 4T 1TD ● PVS B42 4T ● PVS ● PVS
● RD B48 4T ● RD ● RD
● RTK ● RTK ● RTK

● Two Deep Roll Out Trays (DROT) in each ● Two Deep Roll Out Trays (DROT) in each ● Two Deep Roll Out Trays (DROT) in each
door opening door opening door opening

● Deep Roll Out Trays are not adjustable ● Deep Roll Out Trays are not adjustable ● Deep Roll Out Trays are not adjustable
● Hinged as shown – center door can be reversed

in the field

Shenandoah Cabinetry Specification Guide

100 Base Cabinets: With Accessories

IFNASCTTAOLRLYED Base Cabinet Base Pot and Pan Base Pot and Pan
Organizer Cabinet Organizer Cabinet
with Factory Installed
1 Door, 1 Drawer 2 Butt Doors, 1 Drawer
Roll Out Tray Divider
IFNASCTTAOLRLYED IFNASCTTAOLRLYED

B12 ROTD ● APC B24 BPPO ● APC B24 BUTT BPPO ● APC
B15 ROTD ● FE ● FE B27 BUTT BPPO ● FE
Base Cabinets ● PVS ● IF B30 BUTT BPPO ● IF
● RTK ● PVS B33 BUTT BPPO ● PVS
● RTK B36 1TD BUTT BPPO ● RTK

● Roll Out Tray Divider in natural finish solid wood and ● Organizer in natural finish solid wood and wood ● Organizer in natural finish solid wood and wood
wood veneer construction veneer construction veneer construction

● No shelf ● Top shelf measures 6  3⁄16” deep ● Top shelf measures 6  3⁄16” deep
● B12 ROTD features two compartments (one partition) ● Middle shelf measures 9 3⁄4” deep ● Middle shelf measures 9 3⁄4” deep
● B15 ROTD features three compartments

(two partitions)
● Partition(s) are field installed

Base Cabinet Base Cabinet

1 Door, 1 Drawer 1 Door, 1 Drawer
1 Factory Installed Wastebasket 2 Factory Installed Wastebaskets

IFNASCTTAOLRLYED IFNASCTTAOLRLYED

BWBT15 ● APC BWBT15-2 ● APC
● FE BWBT18-2 ● FE
● IF ● IF
● PVS ● PVS
● RTK ● RTK

● Features one white plastic 35 quart capacity bin ● BWBT15-2 features two white plastic 27 quart
● Wastebasket rests in a natural maple plywood frame capacity bins
● Frame slides on full access glides, not available
● BWBT18-2 features two white plastic 35 quart
with CushionClose capacity bins
● Includes bag storage tray at rear
● Decorative hardware strongly recommended ● Wastebaskets rest in a natural maple plywood frame
● Tray NOT dishwasher safe ● Frame slides on full access glides, not available with
● Wastebasket lid may be ordered separately
CushionClose
● Decorative hardware strongly recommended
● Wastebasket lids may be ordered separately

for BWBT18-2

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinet Base Cabinets: With Accessories 101

1 Door, 1 Drawer Base Cabinet

with Cutting Board Door Rack Kit 1 Door, 1 Drawer
with Plastic Bag Door Storage Kit

B18 CBDR ● APC B15 PBDSU ● APC
● FE B18 PBDSU ● FE
● PVS ● PVS Base Cabinets
● RTK ● RTK

● Cutting Board Door Rack Kit packaged separately for ● Plastic Bag Door Storage Unit packaged separately
field installation for field installation

● Kit in natural finish solid wood features chrome rails ● Unit in natural finish solid wood and wood veneer
● Full depth adjustable shelf must be field trimmed to ● Full depth adjustable shelf must be field trimmed

half-depth to half-depth
● Cannot be used with Deep Roll Out Trays ● Cannot be used with Deep Roll Out Trays
● Solid wood cutting board is NOT dishwasher safe ● Removable white plastic tray is NOT dishwasher safe
● Cutting Board measures 15 15⁄16” x 10 9⁄16” x 1 3⁄16”

Shenandoah Cabinetry Specification Guide

102 Base Cabinets: With Factory Installed Drawer Accessory

Base Cabinets with Factory Base Cabinet
Installed Drawer Accessory Factory Installed Drawer Accessory

B15 * ● APC
B18 * ● FE
B21 * ● PVS
B24 * ● RTK
B24 BUTT *

Base Cabinet

with 1 Deep Roll Out Tray and

Factory Installed Drawer Accessory

Base Cabinets B15 FWT * ● APC
B18 FWT * ● FE
B21 FWT * ● PVS
B24 FWT * ● RTK
B24 FWT BUTT *

Ordering Base cabinets with Factory Base Cabinet
Installed Drawer Accessory:
with 2 Deep Roll Out Trays and
1. Select a Base cabinet configuration
Example: B15 2FWT (Base cabinet with Factory Installed Drawer Accessory

Two Deep Roll Out Trays) B15 2FWT * ● APC
B18 2FWT * ● FE
2. Choose a Factory Installed Base B21 2FWT * ● PVS
drawer accessory from the list on the B24 2FWT * ● RTK
following page B24 2FWT BUTT *

Example: Wood Tiered Cutlery Divider
(WTCD)

3. Replace the asterisk (*) with the
code for the Factory Installed Base
drawer accessory to order as a Factory
Installed Accessory

Example: B15 2FWT WTCD

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: With Factory Installed Drawer Accessory 103

Chopping Block • CHB

Replace * with CHB to complete SKU

• 1 1⁄4” solid maple butcher block style chopping block slides independently from drawer
• Chopping block must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish
• Chopping block is NOT dishwasher safe

Cutlery Divider • CD W idth Sections
15” 3
Replace * with CD to complete SKU 18” 4
21” 5
• Solid hardwood and plywood in natural finish 24” 5

Cutting Center • CC Width Slots Base Cabinets
15” 10
Replace * with CC to complete SKU 18” 13
21” 16
• 3⁄4” solid maple butcher block style cutting board slides independently from drawer 24” 19
• Cutting board must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish
• Cutting Board is NOT dishwasher safe

Knife Section • KS

Replace * with KS to complete SKU

• Solid hardwood blade dividers in natural finish with cork pad handle rest

Knife Section Cutting Center • KSCC Width Slots
15” 10
Replace * with KSCC to complete SKU 18” 13
21” 16
• 3⁄4” solid maple butcher block style cutting board slides independently from drawer 24” 19
• Cutting board must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish Width Sections
• Solid hardwood blade dividers in natural finish with cork pad handle rest 15” 5
• Cutting Board is NOT dishwasher safe 18” 5
21” 7
Molded Plastic Cutlery Divider • MPCD 24” 7

Replace * with MPCD to complete SKU

• Features molded plastic sections with natural finish
• Not field trimmable
• Dishwasher safe

Spice Drawer Insert • SDI

Replace * with SDI to complete SKU

• Solid hardwood and plywood in natural finish
• Accommodates most spice containers (not included)

Wood Tiered Cutlery Divider • WTCD Upper Lower

Replace * with WTCD to complete SKU Width Sections Sections

• Double tiered cutlery divider slides independently from drawer 15” 5 5
• Solid hardwood and plywood in natural finish
18” 5 6

21” 6 7

24” 7 7

Shenandoah Cabinetry Specification Guide

104 Base Cabinets: Peninsula Peninsula Base Peninsula Base

Peninsula Base Cabinets 2 Doors, 1 Drawer 4 Butt Doors, 1 Drawer

Base Cabinets PB12 ● APC PB24 BUTT ● APC
PB18 ● FE PB30 BUTT ● FE
PB24 ● PVS PB36 1TD BUTT ● PVS
● RD ● RD
● RTK ● RTK

Peninsula Base cabinets are 34 1⁄2” high by ● Full depth adjustable shelf ● Full depth adjustable shelf
24” deep and range from 12” to 42” wide. ● Drawer accessible on one side only ● Drawer accessible on one side only
● Panel on opposite side of drawer ● Panel on opposite side of drawer
Cathedral doors are not available on
Peninsula Base cabinets. Peninsula Base Peninsula Base

Single door Peninsula Base cabinets 4 Doors, 1 Drawer 4 Doors, 2 Drawers
are hinged left and can be reversed in
the field.

Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.

When selecting the Recessed Toe Kick PB30 ● APC PB36 ● APC
Option, the drawer side indicates PB36 1TD ● FE PB42 ● FE
the front of the cabinet in order to ● PVS ● PVS
correctly select Recessed Toe Kick ● RD ● RD
Right or Left. ● RTK ● RTK

● Full depth adjustable shelf ● Full depth adjustable shelf
● Drawer accessible on one side only ● Drawers accessible on one side only
● Panel on opposite side of drawer ● PB36 features one panel on opposite side

of drawers
● PB42 features two panels on opposite side

of drawers

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Drawer Base 105

Drawer Base Cabinets Drawer Base Cabinet Drawer Base Cabinet

3 Drawers 4 Drawers

DB12 DB24 ● APC DB12 4DWR ● APC Base Cabinets
DB15 DB27 ● CFO DB15 4DWR ● CFO
DB18 DB30 ● FE DB18 4DWR ● FE
DB21 DB36 1TD ● PVS DB21 4DWR ● PVS
● RD DB24 4DWR ● RD
● RTK ● RTK

Drawer Base cabinets are 34 1⁄2” high by ● 1 standard and 2 large drawers ● 1 large and 3 standard drawers
24” deep and range from 12” to 36” wide.

Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.

Drawer Base Cabinet

4 Drawers

DB36 ● APC
● CFO
● FE
● PVS
● RD
● RTK

● 2 standard and 2 large drawers

Shenandoah Cabinetry Specification Guide

106 Base Cabinets: Drawer Base with Factory Installed Drawer Accessory

Drawer Base Cabinets with 3 Drawer Base Cabinet
Factory Installed Drawer
Accessory with Factory Installed Drawer Accessory

DB15 * ● APC
DB18 * ● FE
DB21 * ● PVS
DB24 * ● RTK

4 Drawer Base Cabinet

with Factory Installed Drawer Accessory

Base Cabinets DB15 4DWR * ● APC
DB18 4DWR * ● FE
DB21 4DWR * ● PVS
DB24 4DWR * ● RTK

Ordering Base cabinets with Factory
Installed Drawer Accessory:

1. Select a Drawer Base cabinet
configuration

DB15 (3 Drawer Base cabinet)

2. Choose a Factory Installed Base
drawer accessory from the list on the
following page

Example: Wood Tiered Cutlery Divider
(WTCD)

3. Replace the asterisk (*) with the
code for the Factory Installed Base
drawer accessory to order as a Factory
Installed Accessory

Example: DB15 WTCD

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Drawer Base with Factory Installed Drawer Accessory 107

Chopping Block • CHB

Replace * with CHB to complete SKU

• 1 1⁄4” solid maple butcher block style chopping block slides independently from drawer
• Chopping block must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish
• Chopping block is NOT dishwasher safe

Cutlery Divider • CD W idth Sections
15” 3
Replace * with CD to complete SKU 18” 4
21” 5
• Solid hardwood and plywood in natural finish 24” 5

Cutting Center • CC Width Slots Base Cabinets
15” 10
Replace * with CC to complete SKU 18” 13
21” 16
• 3⁄4” solid maple butcher block style cutting board slides independently from drawer 24” 19
• Cutting board must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish
• Cutting board is NOT dishwasher safe

Knife Section • KS

Replace * with KS to complete SKU

• Solid hardwood blade dividers in natural finish with cork pad handle rest

Knife Section Cutting Center • KSCC W idth Slots
15” 10
Replace * with KSCC to complete SKU 18” 13
21” 16
• 3⁄4” solid maple butcher block style cutting board slides independently from drawer 24” 19
• Cutting board must be removed from cabinet for use
• 1 7⁄8” high solid hardwood dovetail drawer in natural finish Width Sections
• Solid hardwood blade dividers in natural finish with cork pad handle rest 15” 5
• Cutting board is NOT dishwasher safe 18” 5
21” 7
Molded Plastic Cutlery Divider • MPCD 24” 7

Replace * with MPCD to complete SKU

• Features molded plastic sections with natural finish
• Not field trimmable
• Dishwasher safe

Spice Drawer Insert • SDI

Replace * with SDI to complete SKU

• Solid hardwood and plywood in natural finish
• Accommodates most spice containers (not included)

Wood Tiered Cutlery Divider • WTCD Upper Lower

Replace * with WTCD to complete SKU Width Sections Sections

• Double tiered cutlery divider slides independently from drawer 15” 5 5
• Solid hardwood and plywood in natural finish
18” 5 6

21” 6 7

24” 7 7

Shenandoah Cabinetry Specification Guide

108 Base Cabinets: Sink/Range Sink/Range Base Sink/Range Base

Sink/Range Base Cabinets 1 Door, 1 Panel 2 Butt Doors, 1 Panel

Base Cabinets SB18 ● APC SB24 BUTT ● APC
SB21 ● FE SB27 BUTT ● FE
SB24 ● PVS SB30 BUTT ● PVS
● RD SB33 BUTT ● RD
● RTK SB36 BUTT ● RTK

Sink/Range Base cabinets are ● No shelf ● No shelf
341⁄2” high by 24” deep and range from ● Full height back ● Full height back
18” to 48” wide. ● Subtract 1 1⁄2” from width and depth for available ● Subtract 1 1⁄2” from width and depth for available

Cathedral doors are not available on sink bowl opening sink bowl opening
Sink/Range Base cabinets. ● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications

Single door Sink/Range Base cabinets for adequate clearance and required for adequate clearance and required
are hinged left and can be reversed in installation materials installation materials
the field.
Sink/Range Base Sink/Range Base
Inset toe kick construction requires BTK8
matching toe kick – must be ordered 2 Doors, 1 Panel 2 Doors, 2 Panels
separately.

When placing a Sink/Range Base SB30 ● APC SB39 ● APC
cabinet in a design, select a cabinet SB33 ● FE SB42 ● FE
at least 3” wider than the sink or SB36 ● PVS SB48 ● PVS
cooktop to allow for installation clips. ● RD ● RD
Review manufacturer’s specifications ● RTK ● RTK
for dimensions and adequate
clearance requirements. ● No shelf ● No shelf
● Full height back ● Full height back
If a Corner Sink Base cabinet or front ● Subtract 1 1⁄2” from width and depth for available ● Subtract 1 1⁄2” from width and depth for available
is selected, remember to place the
dishwasher a minimum of 15” from sink bowl opening sink bowl opening
the cabinet to allow for adequate ● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications
standing space and proper appliance
door operation. for adequate clearance and required for adequate clearance and required
installation materials installation materials

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Sink/Range Base Base Cabinets: Sink/Range 109

3 Doors, 3 Panels Deep Sink Base Cabinet

2 Butt Doors

SB45 ● APC DSB30 BUTT ● APC A A C C
● FE DSB36 BUTT ● FE Cut Out Min. Max. B Max. FOL Max. SOL
● PVS ● PVS DSB30 BUTT 23 3⁄4” 27 15⁄16” 2 7⁄8” 9 7⁄8” 11 1⁄4”
● RD ● RD DSB36 BUTT 29 3⁄4” 33 15⁄16” 2 7⁄8” 9 7⁄8” 11 1⁄4” Base Cabinets
● RTK ● RTK

● No shelf ● Accommodates most farm sinks
● Full height back ● Stiles at apron are 3 1⁄8” wide and trimmable
● Subtract 1 1⁄2” from width and depth for available ● A cutout exists in the door area where the 3 1⁄8” stiles are routed to 1 5⁄8”
● Refer to sink manufacturer’s specifications for adequate clearance and required
sink bowl opening
● Hinged as shown – can be reversed in the field installation materials
● Refer to sink manufacturer’s specifications

for adequate clearance and required
installation materials

Corner Sink Base

CSB36 ● APC
● FE
● PVS

● No shelf
● Sides are finished
● Cabinet requires a minimum of 34” to fit through doorway
● Additional space recommended if appliance is installed on either side of this cabinet for proper appliance

door operation
● Cabinet features solid top which must be field cut for sink installation as per manufacturer's specifications
● Maximum sink width is 25 3⁄4” if cut out is 4” back from face of front frame
● Refer to sink manufacturer’s specifications for adequate clearance and required

installation materials

Shenandoah Cabinetry Specification Guide

110 Base Cabinets: Sink/Range Front

Sink/Range Front Sink/Range Front Sink/Range Front

1 Door, 1 Panel 2 Butt Doors, 1 Panel 2 Doors, 1 Panel

SF12 SF24 BUTT SF30
SF15 SF27 BUTT SF33
SF18 SF30 BUTT SF36
Base Cabinets SF21 SF33 BUTT
SF24 SF36 BUTT

● Sink/Range Front not trimmable ● Sink/Range Front not trimmable ● Sink/Range Front not trimmable
● Order floors and returns separately ● Order floors and returns separately ● Order floors and returns separately

(trimming may be required) – refer to Panel (trimming may be required) – refer to Panel (trimming may be required) – refer to Panel
Section for availability Section for availability Section for availability

Sink/Range Front Sink/Range Front Corner Sink Front

2 Doors, 2 Panels 3 Doors, 3 Panels

SF39 SF45 A B
SF42
SF48 CSF36 35 31⁄32” 16 15⁄16”

CSF42 42 11⁄32” 25 15⁄16”

CSF36
CSF42

● Sink/Range Front not trimmable ● Sink/Range Front not trimmable ● Corner Sink Front not trimmable
● Order floors and returns separately ● Vertical edges of frame are mitered to attach to
● Hinged as shown – can be reversed in the field
(trimming may be required) – refer to Panel ● Order floors and returns separately adjacent cabinet frames
Section for availability ● Toe kick shipped loose
(trimming may be required) – refer to Panel ● Order floors and returns separately
Section for availability
(trimming may be required) – refer to Panel
Section for availability

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Sink with Factory Installed Accessories 111

Sink Base Cabinets Sink Base Sink Base
with Factory Installed
1 Door, 1 Panel with 2 Butt Doors, 1 Panel with
Accessories Factory Installed Tilt-Out Tray Factory Installed Tilt-Out Tray

IFNASCTTAOLRLYED IFNASCTTAOLRLYED

Stainless Plastic ● APC Stainless Plastic ● APC
SB18 STO SB18 TO ● FE SB24 BUTT STO ● FE
SB21 STO SB21 TO ● PVS SB27 BUTT STO SB24 BUTT TO ● PVS
SB24 STO SB24 TO ● RD SB30 BUTT STO SB27 BUTT TO ● RD
● RTK SB30 BUTT TO ● RTK Base Cabinets

● No shelf ● No shelf
● Full height back ● Full height back
● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for

available sink bowl opening available sink bowl opening
● Tilt-Out Trays are NOT dishwasher safe ● Tilt-Out Trays are NOT dishwasher safe
● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications

for adequate clearance and required for adequate clearance and required
installation materials installation materials

Sink Base cabinets with Factory Installed Sink Base Sink Base
Accessories feature Tilt-Out Trays with
Hidden Hinges. 2 Doors, 1 Panel with 2 Butt Doors, 1 Panel with
Factory Installed Tilt-Out Tray Factory Installed Tilt-Out Trays
Sink Base cabinets with Factory Installed
Accessories are 341⁄2” high by 24” deep IFNASCTTAOLRLYED IFNASCTTAOLRLYED
and range from 18” to 48” wide.
Stainless Plastic ● APC Stainless Plastic ● APC
Cathedral doors are not available on SB30 STO SB30 TO ● FE SB33 BUTT STO ● FE
Sink Base cabinets with Factory Installed ● PVS SB36 BUTT STO SB33 BUTT TO ● PVS
Accessories. ● RD SB36 BUTT TO ● RD
● RTK ● RTK
Single door Sink Base cabinets with
Factory Installed Accessories are hinged
left and can be reversed in the field.

Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.

● No shelf ● No shelf
● Full height back ● Full height back
● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for

available sink bowl opening available sink bowl opening
● Tilt-Out Trays are NOT dishwasher safe ● Tilt-Out Trays are NOT dishwasher safe
● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications

for adequate clearance and required for adequate clearance and required
installation materials installation materials

Shenandoah Cabinetry Specification Guide

112 Base Cabinets: Sink with Factory Installed Accessories

Sink Base Sink Base

2 Doors, 1 Panel with 2 Doors, 2 Panels with

Factory Installed Tilt-Out Trays Factory Installed Tilt-Out Trays

IFNASCTTAOLRLYED IFNASCTTAOLRLYED

Base Cabinets Stainless Plastic ● APC Stainless Plastic ● APC
SB33 STO SB33 TO ● FE SB39 STO SB39 TO ● FE
SB36 STO SB36 TO ● PVS SB42 STO SB42 TO ● PVS
● RD SB48 STO SB48 TO ● RD
● RTK ● RTK

● No shelf ● No shelf
● Full height back ● Full height back
● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for

available sink bowl opening available sink bowl opening
● Tilt-Out Trays are NOT dishwasher safe ● Tilt-Out Trays are NOT dishwasher safe
● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications

for adequate clearance and required for adequate clearance and required
installation materials installation materials

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Sink with Factory Installed Accessories 113

30” Sink Base 36” Sink Base
Multi-Storage Cabinet Multi-Storage Cabinet

IFNASCTTAOLRLYED 2 Butt Doors IFNASCTTAOLRLYED 2 Butt Doors

Base Cabinets

SBMS30 BUTT STO ● APC SBMS36 BUTT STO ● APC
● FE ● FE
● PVS ● PVS
● RTK ● RTK

● Full height back ● Full height back
● Features factory installed Sink Base Door Storage ● Features factory installed Sink Base Door Storage

Unit (SBDSU15) on left door, Plastic Bag Door Unit (SBDSU18) on left door, Plastic Bag Door
Storage Unit (PBDSU15) on right door and one Storage Unit (PBDSU18) on right door and two
Stainless Tilt-Out Tray (STO TRAY 22) Stainless Tilt-Out Trays (STO TRAY 11)
● Sink Base Multi-Storage Shelf (SBMSS) shipped ● Sink Base Multi-Storage Shelf (SBMSS) shipped
separately for field installation left or right separately for field installation left or right
● Sink Base Multi-Storage Shelf measures ● Sink Base Multi-Storage Shelf measures
8 3⁄16” wide x 8” high x 17 1⁄2” deep 8 3⁄16” wide x 8” high x 17 1⁄2” deep
● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for
available sink bowl opening available sink bowl opening
● Tilt-Out Tray and door storage unit trays are NOT ● Tilt-Out Trays and door storage unit trays are NOT
dishwasher safe dishwasher safe
● Refer to sink manufacturer’s specifications ● Refer to sink manufacturer’s specifications
for adequate clearance and required for adequate clearance and required
installation materials installation materials

Shenandoah Cabinetry Specification Guide

114 Base Cabinets: Blind Corner Blind Corner Base

Blind Corner Base Cabinets 1 Door, 1 Drawer

Base Cabinets Blind Corner Base cabinets are 34 1⁄2” high BLB36/39 ● APC
by 24” deep. The visible width of these BLB39/42 ● CFO
cabinets ranges from 13 3⁄8” to 28” wide. BLB42/45 ● FE
BLB45/48 ● PVS
Cathedral Doors are not available on Blind BLB48/51 ● RD
Corner Base cabinets. ● RTK

Inset toe kick construction requires BTK8 ● Half-depth adjustable shelf
matching toe kick – must be ordered ● Blind base door and drawer are installed in the left section
separately. ● Refer to the chart on following page for installation specifications
● Includes 1⁄8” panel to cover blind opening (field trim and install)
● Recessed Toe Kick (RTK) only available as Both (RTKB)
● Door and drawer can be reversed in the field as blind sections are identical
● Must order Universal Filler

Blind Corner Base Cabinet Dimensions

When a Blind Corner Base cabinet is
used in a design, remember to include
the appropriate filler. For a finished,
decorative look add an Overlay Filler
(Full Overlay door styles) to Universal
Fillers or Decorative Blocks to a Fluted
Beaded Filler.

Cabinet Door Cabinet Door
Width Opening
Width Opening Cabinet A B C D
BLB48/51 48” 17 3⁄4” 6” 9 1⁄4”
Cabinet A B C

BLB36/39 27” 8 3⁄4” 6 1⁄4”

BLB39/42 33” 11 3⁄4” 6 1⁄4”

BLB42/45 39” 14 3⁄4” 6 1⁄4”

BLB45/48 45” 17 3⁄4” 6 1⁄4”

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Blind Corner 115

Blind Corner Base Installation Chart

Base Cabinets

Full Overlay (FOL) Door Styles

Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Dimension requirements do not include optional Overlay Fillers – add 7⁄8” if Overlay Fillers will be used, except for BLB48/51 add 1⁄8”.

Actual Wall Space A Exposed Frame B

Cabinet Door Minimum Maximum Maximum Minimum Maximum

Cabinet Width Opening Door Space* Pull Space Space* Space

BLB36/39 27” 8 3⁄4” DR1224 38 1⁄4” 1 3⁄4” 40” 14 1⁄4” 16”
BLB39/42 43” 17 1⁄4” 19”
BLB42/45 33” 11 3⁄4” DR1524 41 1⁄4” 1 3⁄4” 46” 20 1⁄4” 22”
BLB45/48 49” 23 1⁄4” 25”
BLB48/51 39” 14 3⁄4” DR1824 44 1⁄4” 1 3⁄4” 52” 24” 28”

45” 17 3⁄4” DR2124 47 1⁄4” 1 3⁄4”

48” 17 3⁄4” DR2124 48” 4”

Standard Overlay (SOL) Door Styles

Wall Space A requirements include optional decorative hardware clearance.
1 1⁄4” may be deducted if decorative hardware is not used.

Actual Wall Space A Exposed Frame B
Cabinet Maximum
Cabinet Width Door Door Minimum Pull Maximum Minimum Maximum
Opening Space Space Space Space
2 5⁄8”
BLB36/39 27” 8 3⁄4” DR1224 37 3⁄8” 2 5⁄8” 40” 13 3⁄8” 16”
BLB39/42 40 3⁄8” 2 5⁄8” 43” 16 3⁄8” 19”
BLB42/45 33” 11 3⁄4” DR1524 43 3⁄8” 2 5⁄8” 46” 19 3⁄8” 22”
BLB45/48 46 3⁄8” 4” 49” 22 3⁄8” 25”
BLB48/51 39” 14 3⁄4” DR1824 48” 52” 24” 28”

45” 17 3⁄4” DR2124

48” 17 3⁄4” DR2124

Shenandoah Cabinetry Specification Guide

116 Base Cabinets: Blind Peninsula Corner Blind Peninsula Corner Base

Blind Peninsula Corner
Base Cabinets

PBC24 ● APC
PBC24 BUTT ● FE
● PVS
● RD

Base Cabinets Blind Peninsula Corner Base cabinets are ● Full depth adjustable shelf
341⁄2” high by 24” deep. ● Can be installed left or right
● Universal fillers are recommended for use
Cathedral doors are not available on Blind
Peninsula Corner Base cabinets. between PBC24 and wall and adjoining
base cabinet or appliance for hardware
Inset toe kick construction requires BTK8 clearance and proper door operation
matching toe kick – must be ordered ● Refer to the chart below for installation
separately. specifications
● Roll out accessories are not recommended
● Must order Universal Fillers

Blind Peninsula Corner Base Installation Chart

Full Overlay (FOL) Door Styles

Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Must use these dimensions if optional Overlay Fillers will be used.

Actual Wall Space A Exposed Frame B Filler (at wall)
Cabinet Door
Cabinet Width Opening Door(s) Min. Max. Max. Min. Max. Min. Max.*
PBC24 DR2424 Space Pull Space* Space Space* 2 1⁄4” 3”
24” 20 3⁄4”
26 1⁄4” 3⁄4” 27” 2 1⁄4” 3”

PBC24 BUTT 24” 20 3⁄4” DR1224 BUTT (2) 26 1⁄4” 3⁄4” 27” 2 1⁄4” 3” 2 1⁄4” 3”

Standard Overlay SOL) Door Styles

Wall Space A requirements include optional decorative hardware clearance.
1 1⁄4” may be deducted if decorative hardware is not used.

Actual Wall Space A Exposed Frame B Filler (at wall)
Cabinet Door
Cabinet Width Opening Door(s) Min. Max. Max. Min. Max. Min. Max.
PBC24 DR2424 Space Pull Space Space Space 1 3⁄8” 3”
24” 20 3⁄4”
25 3⁄8” 1 5⁄8” 27” 1 3⁄8” 3”

PBC24 BUTT 24” 20 3⁄4” DR1224 BUTT (2) 25 3⁄8” 1 5⁄8” 27” 1 3⁄8” 3” 1 3⁄8” 3”

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Corner Base Cabinets Base Easy Reach Base Cabinets: Corner 117

Asymmetrical Base Easy Reach

Cathedral doors are not available on NOTE: For front view illustration, refer to Base Cabinets
Corner Base cabinets. Shenandoah 20-20 catalog.

Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.

Cabinet requires a minimum of 34” to fit
through doorway.

Front Frame

Opening
ABC

BER33 33” 20 1⁄2” 10 7⁄16”
BER36
36” 23 1⁄2” 14 5⁄8”

To ensure proper door function on BER33L BER36L ● APC BER3336R BER3633R ● APC
a Corner Base cabinet, a 3” Filler or BER33R BER36R ● FE BER3336L BER3633L ● FE
Dishwasher Return is recommended ● PVS ● PVS
for placement between the cabinet
and any appliance or other design ● One adjustable half-depth shelf (non-removable) ● One adjustable half-depth shelf (non-removable)
element deeper than 24”. ● All door styles must be ordered hinged left ● All door styles must be ordered hinged left

In addition the Corner Base cabinet or right or right
should be hinged opposite (e.g., if ● BER33 features two solid recessed panel doors for ● McKinley door style features one solid recessed
a range is placed to the right of a
Corner Base, the cabinet should be McKinley door styles panel door (33” side) and one solid raised panel
hinged left). ● Sides are finished door (36” side)
● Doors open 170 degrees ● Sides are finished
● Cabinet requires a minimum of 34” to fit through ● Doors open 170 degrees
● Cabinet requires a minimum of 34” to fit through
doorway doorway
● Additional space recommended if appliance is ● Additional space recommended if appliance is
installed on the hinge side of this cabinet for
installed on the hinge side of this cabinet for proper door operation
proper door operation ● Front frame opening dimension A =12 11⁄16”

Shenandoah Cabinetry Specification Guide

118 Base Cabinets: Corner

Base Super Susan Asymmetrical Base Super Susan Base Super Susan

IFNASCTTAOLRLYED with Wood Spin Units IFNASCTTAOLRLYED with Wood Spin Units with Plastic Spin Shelves

IFNASCTTAOLRLYED

Base Cabinets NOTE: For front view illustration, refer to
Shenandoah 20-20 catalog.

Front Frame Front Frame
Opening
B C Opening
A ABC
20 1⁄2” 10 7⁄16”
BSS33 WD 33” 23 1⁄2” 14 5⁄8” BSS33 33” 20 1⁄2” 10 7⁄16”
BSS36 WD 36” BSS36
36” 23 1⁄2” 14 5⁄8”

BSS33L WD BSS36L WD ● APC BSS3336R WD BSS3633R WD ● APC BSS33L BSS36L ● APC
BSS33R WD BSS36R WD ● FE BSS3336L WD ● FE BSS33R BSS36R ● FE
● PVS BSS3633L WD ● PVS ● PVS

● Fixed wood spin unit mounted on cabinet floor ● Fixed wood spin unit mounted on cabinet floor ● BSS33 features two 28” diameter white spin
● Features one wood spin unit attached to 3⁄4” ● Features one wood spin unit attached to 3⁄4” shelves with pole (top shelf adjustable)

adjustable shelf adjustable shelf ● BSS36 features two 32” diameter white spin
● Natural finish wood spin units feature 1” lip ● Natural finish wood spin units feature 1” lip and shelves with pole (top shelf adjustable)
● Wood spin diameter is 28” for BSS33 and 32”
are 28” in diameter ● All door styles must be ordered hinged left
for BSS36 ● All door styles must be ordered hinged left or right
● All door styles must be ordered hinged left
or right ● BSS33 features two solid recessed panel doors for
or right ● McKinley door style features one solid recessed McKinley door styles
● BSS33 WD features two solid recessed panel
panel door (33” side) and one solid raised panel ● Sides are finished
doors for McKinley door style door (36” side) ● Doors open 170 degrees
● Sides are finished ● Sides are finished ● Cabinet requires a minimum of 34” to fit through
● Doors open 170 degrees ● Doors open 170 degrees
● Cabinet requires a minimum of 34” to fit through ● Cabinet requires a minimum of 34” to fit through doorway
doorway ● Additional space recommended if appliance is
doorway ● Additional space recommended if appliance is
● Additional space recommended if appliance is installed on the hinge side of this cabinet for installed on the hinge side of this cabinet for
proper door operation proper door operation
installed on the hinge side of this cabinet for ● Front frame opening dimension A =12 11⁄16”
proper door operation

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Asymmetrical Base Super Susan IFNASCTTAOLRLYED Corner Base Base Cabinets: Corner 119

with Plastic Spin Shelves with Wood Spin Units Corner Base

IFNASCTTAOLRLYED with Plastic Spin Shelves

IFNASCTTAOLRLYED

NOTE: For front view illustration, refer to Base Cabinets
Shenandoah 20-20 catalog.

BSS3336L BSS3633L ● APC CBS36 WD ● APC CBS36 ● APC
BSS3336R BSS3633R ● FE ● FE ● FE
● PVS ● PVS ● PVS

● Features two 28” diameter white spin shelves with ● Fixed wood spin unit mounted on cabinet floor ● Features two 28” diameter full round white spin
pole (top shelf adjustable) ● Features one wood spin unit attached to 3⁄4” shelves with pole (top shelf adjustable)

● All door styles must be ordered hinged left adjustable shelf ● Sides are finished
or right ● Natural finish wood spin units feature 1” lip and ● Cabinet requires a minimum of 34” to fit through

● McKinley door style features one solid recessed are 28” in diameter doorway
panel door (33” side) and one solid raised panel ● Sides are finished ● Additional space recommended if appliance is
door (36” side) ● Cabinet requires a minimum of 34” to fit through
installed on the hinge side of this cabinet for
● Sides are finished doorway proper door operation
● Doors open 170 degrees ● Additional space recommended if appliance is ● Cabinet features solid top
● Cabinet requires a minimum of 34” to fit through
installed on the hinge side of this cabinet for
doorway proper door operation
● Additional space recommended if appliance is ● Cabinet features solid top

installed on the hinge side of this cabinet for
proper door operation
● Front frame opening dimension A =12 11⁄16”

Shenandoah Cabinetry Specification Guide

120 Base Cabinets: Corner Corner Sink Base Corner Sink Front

Corner Base Carousel

IFNASCTTAOLRLYED

Base Cabinets

A B

CSF36 35 31⁄32” 16 15⁄16”

CSF42 42 11⁄32” 25 15⁄16”

CAR36L CAR36L WD CSB36 ● APC CSF36
CAR36R CAR36R WD ● FE CSF42
● PVS

● CAR36 features two 24” diameter white spin ● No shelf ● Corner Sink Front not trimmable
shelves with pole (top shelf adjustable) ● Sides are finished ● Vertical edges of frame are mitered to attach to
● Cabinet requires a minimum of 34” to fit through
● CAR36 WD features two 24” diameter natural adjacent cabinet frames
finish solid hardwood spin shelves with pole doorway ● Toe kick shipped loose
(top shelf adjustable) ● Additional space recommended if appliance is ● Order floors and returns separately (trimming

● All door styles must be ordered hinged left installed on either side of this cabinet for proper may be required) – refer to Panel section for
or right appliance door operation availability
● Cabinet features solid top which must be field
● Sides are unfinished cut for sink installation as per manufacturer’s
● Doors open 170 degrees specifications
● If unit has an exposed side, order end panel separately ● Maximum sink width is 25 3⁄4” if cut out is 4”
● Additional support for countertop in back is back from face of front frame
● Refer to sink manufacturer’s specifications
necessary for adequate clearance and required
● Additional space recommended if appliance is installation materials

installed on the hinge side of this cabinet for
proper door operation
● Front frame opening dimension A =14 5⁄8”
● Unit must be pulled to install in a
36” x 36” space

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinets: Specialty 121

Specialty Base Cabinet Base Spice Drawer Cabinet Base Wine Rack Cabinet

BSDC6 BWRC6

Inset toe kick construction requires BTK8 l Features veneered engineered wood with exterior ● Features veneered engineered wood finished to Base Cabinets
matching toe kick – must be ordered only finished match cabinet exterior
separately.
l Five individual full depth drawers ● Interior finished to match cabinet exterior
l Flush sides with no face frame or 1⁄4” reveals ● Accommodates five wine bottles
l All wood drawer body with dovetail construction ● 3⁄4” thick sides and shelves
l Wood door styles feature matching wood knobs ● Flush sides with no face frame or 1⁄4” reveals
l Maple Linen and White Thermo Foil door styles ● Cannot be retrofitted with Base Spice Drawer

feature white porcelain knobs Cabinet drawers

Shelf End Base Shelf End Peninsula Base

SEB SEPB

l Features veneered engineered wood finished to l Features veneered engineered wood finished to
match cabinet exterior match cabinet exterior

● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior
● 3⁄4” shelves ● 3⁄4” shelves
● Distance between shelves is 9 3⁄16” ● Distance between shelves is 9 3⁄16”
● 7⁄8” screw recommended from inside of adjacent ● 7⁄8” screw recommended from inside of adjacent

cabinet for installation cabinet for installation
l Toe kick is removable – invert unit for right or left ● Cabinet dimensions are for reference purposes
l Cabinet dimensions are for reference
ONLY – countertop must be measured and
purposes ONLY – countertop must be fabricated after cabinet installation
measured and fabricated after cabinet
installation Shenandoah Cabinetry Specification Guide

122 Base Cabinets: Specialty Base End Angle Base End Angle

Base End Angle 1 Door, 1 Panel 2 Doors, 2 Panels

1 Door

Base Cabinets BEA12L FH ● APC BEA12L ● APC BEA24 ● APC
BEA12R FH ● FE BEA12R ● FE ● PVS
● PVS ● PVS
● RD ● RD
● RTK ● RTK

● One adjustable shelf ● False panel aligns with adjacent drawer ● False panels align with adjacent drawer
● One adjustable shelf
● Must order left or right ● Recessed Toe Kick (RTK) only available on 12” side ● Requires 24” x 24” space
● Must order left or right
● Recessed Toe Kick (RTK) only available on 12” side ● Reduced depth minimum is 18” ● One adjustable shelf
● Cabinet dimensions are for reference purposes ● Cabinet dimensions are for reference
● Reduced depth minimum is 18”
● Cabinet dimensions are for reference ONLY – countertop must be measured and purposes ONLY – countertop must be
fabricated after cabinet installation measured and fabricated after cabinet
purposes ONLY – countertop must be installation
measured and fabricated after cabinet
installation

Base Microwave Cabinet Base Oven Cabinet Universal

A A A B B
BMC24 20 3⁄4”
BMC27 23 3⁄4”
BMC30 26 3⁄4”

● APC ● APC Cut Out Min. Max. Min. Max.*
● FE ● FE
BMC24 ● PVS BOCU27 ● PVS BOCU27 20 3⁄4” 24 15⁄16” 18 1⁄4” 29”
BMC27 ● RD BOCU30 ● RD
BMC30 ● RTK BOCU33 ● RTK BOCU30 23 3⁄4” 27 15⁄16” 18 1⁄4” 29”

BOCU33 26 3⁄4” 30 15⁄16” 18 1⁄4” 29”

*Includes removal of top rail

● Microwave opening finished to match cabinet ● Designed for mounting single oven below countertop
exterior
● 3” top rail is field removable and field trimmable
● Designed to accommodate countertop style
microwave ● 3 1⁄8” stiles

● Features two standard depth drawers ● Will accommodate certain cooktops (in conjunction with undercounter oven) or drop-in ranges
● Accent Molding recommended – order separately ● Most ovens require a top rail of varying heights to create a finished look and to allow for the
● Refer to appliance manufacturer’s
oven door to clear the countertop when opened
specifications for adequate clearances ● Refer to appliance manufacturer’s specifications for adequate clearances and required

installation materials

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Base Cabinet Accessories Chopping Block Kit Base Cabinets: Accessories 123

Cutting Center Kit

Base Cabinets

CHBK15 CCK15
CHBK18 CCK18
CHBK21 CCK21
CHBK24 CCK24

● Available as Factory Installed for all door styles ● Available as Factory Installed for all door styles
● Kit not available for McKinley door styles ● Kit not available for McKinley door styles
● Field installed accessory replaces existing drawer box ● Field installed accessory replaces existing drawer box
● Glides are not included: reuse existing drawer glides ● Glides are not included: reuse existing drawer glides
● 1 7⁄8” high solid hardwood dovetail drawer in ● 1 7⁄8” high solid hardwood dovetail drawer in

natural finish natural finish
● 1 1⁄4” solid maple butcher block style chopping ● 3⁄4” solid maple butcher block style cutting board

block slides independently from drawer slides independently from drawer
● Can be installed in cabinets with single drawer or ● Can be installed in cabinets with single drawer or

side-by-side drawer configurations side-by-side drawer configurations
● Chopping block must be removed from cabinet ● Cutting board must be removed from cabinet

for cutting for cutting
● Chopping block is NOT dishwasher safe ● Cutting board is NOT dishwasher safe
● Not sized to fit reduced depth cabinets ● Not sized to fit reduced depth cabinets

Shenandoah Cabinetry Specification Guide

124 Base Cabinets: Accessories Molded Plastic Cutlery Wood Tiered Cutlery Divider Kit
Divider Kit
Knife Section Cutting Center Kit

Base Cabinets

Number Upper Lower
A of Sections
Number of Slots MPCDK15 10 1⁄8” 5 Sections Sections
KSCCK15 10 MPCDK18 13 1⁄8” 5
KSCCK18 13 MPCDK21 16 1⁄8” 7 WTCDK15 5 5
KSCCK21 16 MPCDK24 19 1⁄8” 7
KSCCK24 19 WTCDK18 5 6

WTCDK21 6 7

WTCDK24 7 7

KSCCK15 MPCDK15 WTCDK15
KSCCK18 MPCDK18 WTCDK18
KSCCK21 MPCDK21 WTCDK21
KSCCK24 MPCDK24 WTCDK24

● Available as Factory Installed for all door styles ● Available as Factory Installed for all door styles ● Available as Factory Installed for all door styles
● Kit not available for McKinley door styles ● Field installation accessory ● Field installed accessory replaces existing drawer box
● Field installed accessory replaces existing drawer box ● Features molded plastic sections with natural finish ● Glides are not included: reuse existing drawer glides
● Glides are not included: reuse existing drawer glides ● Not field trimmable ● Solid hardwood and plywood in natural finish
● 1 7⁄8” high solid hardwood dovetail drawer in ● Dishwasher safe ● Double tiered cutlery divider slides independently

natural finish with knife section from drawer
● Solid hardwood blade dividers in natural finish with ● Can be installed in cabinets with single drawer or

cork pad handle rest side-by-side drawer configurations
● 3⁄4” solid maple butcher block style cutting board ● Not sized to fit reduced depth cabinets

slides independently from drawer
● Can be installed in cabinets with single drawer or

side-by-side drawer configurations
● Cutting board must be removed from cabinet

for cutting
● Cutting board is NOT dishwasher safe
● Not sized to fit reduced depth cabinets

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Cutlery Divider Kit Knife Section Kit Base Cabinets: Accessories 125

Spice Drawer Insert Kit

Number of Sections Number of Slots SDIK15 Base Cabinets
CDK15 3 KSK15 10 SDIK18
CDK18 4 KSK18 13 SDIK21
CDK21 5 KSK21 16 SDIK24
CDK24 5 KSK24 19
● Available as Factory Installed for all door styles
CDK15 KSK15 ● Field installation accessory
CDK18 KSK18 ● Solid hardwood and plywood in natural finish
CDK21 KSK21 ● Accommodates most spice containers (not included)
CDK24 KSK24 ● Not sized to fit reduced depth cabinets

● Available as Factory Installed for all door styles ● Available as Factory Installed for all door styles Corner Lazy Susan
● Field installation accessory ● Field installation accessory
● Solid hardwood and plywood in natural finish ● Solid hardwood blade dividers in natural finish
● Not sized to fit reduced depth cabinets ● Cork pad handle rest
● Not sized to fit reduced depth cabinets
Base Filler Pull Out
Cabinet Tray Divider

BFP3 TD3 CLS45F

● Must be installed between two base ● Field installation accessory ● Field installation accessory
cabinets behind the face frames in 3” ● Chrome finish ● One 21⁄2” high chrome wire shelf per unit
of floor space ● For use in any 24” deep cabinet or reduced depth ● For use with BLB45/48 or BLB48/51
● More than one unit can be installed
● Cannot be installed next to an appliance or at cabinet to RD-14” ● Order units individually
the end of a run ● Mounting hardware included ● 34” long x 16” deep from center
● Attaches to back of face frame
● No side panels or toe kick ● Not sized to fit reduced depth cabinets
● Filler shipped unattached for field installation
● An overlay filler is recommended for Full

Overlay door styles – order separately
● Features full access ball bearing glides
● One fixed and three adjustable 2 1⁄8” wide

wood shelves feature chrome rails
● Decorative hardware strongly recommended
● Not available with CushionClose

Shenandoah Cabinetry Specification Guide

126 Base Cabinets: Accessories Base Pot & Pan Organizer Kit

Deep Roll Out Tray Kit

Base Oven
A Cabinet Size Cabinet Size
BPPOK24 19 3⁄4” 24” 27”
BPPOK27 22 3⁄4” 27” 30”
BPPOK30 25 3⁄4” 30” 33”
BPPOK33 28 3⁄4” 33” —
BPPOK36 31 3⁄4” 36” —

Base Cabinets A BPPOK24
BPPOK27
DROT12 7 3⁄4” BPPOK30
BPPOK33
DROT15 10 3⁄4” BPPOK36
● Field installation accessory
DROT16 12 1⁄4” ● Top shelf measures 6 3⁄16” deep
● Middle shelf measures 9 3⁄4” deep
DROT18 13 3⁄4” ● Not sized to fit reduced depth cabinets

DROT19 15 1⁄4” Roll Out Tray Divider Kit

DROT21 16 3⁄4” Cutting Board Door Rack Kit

DROT24 19 3⁄4”

DROT27 22 3⁄4”

DROT30 25 3⁄4”

DROT33 28 3⁄4”

DROT36 31 3⁄4”

DROT12 DROT27 ● RD
DROT15 DROT30
DROT16 DROT33
DROT18 DROT36
DROT19
DROT21
DROT24

● Field installation accessory A Cabinet Size CBDRK18
● Includes tray, all glide hardware and installation ROTDK12 7 3⁄4” 12”
ROTDK15 10 3⁄4” 15”
instructions
● DROT drill template is required for all double door ROTDK12
ROTDK15
cabinets that have a fixed center stile – contact
Customer Care for drill template

● Field installation accessory ● Field installation accessory
● ROTDK12 features two compartments (one partition) ● Natural finish solid wood with chrome rails
● ROTDK15 features three compartments ● Cannot be used with Deep Roll Out Trays
● Full depth shelf must be field trimmed to half-depth
(two partitions) ● Solid wood cutting board is NOT dishwasher safe
● Partitions(s) are field installed ● Cutting board measures 15 15⁄16” x 10 9⁄16” x 1 3⁄16”
● Not sized to fit reduced depth cabinets ● CBDRK18 mounts to 18” or 19” wide base doors

Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs

Sliding Towel Bar Base Recycling Kit Base Cabinets: Accessories 127

Wastebasket Unit

STB BR2B15 WBU15

● Field installation accessory ● Field installation accessory ● Field installation accessory Base Cabinets
● Two chrome finish towel bars ● Features two white 27 quart plastic bins, chrome ● Features one white 35 quart plastic bin, chrome
● Mounts to cabinet side panel
● Pulls out 7” for easy access wire rack and full access glides wire rack with storage bin and full access glides
● Sized for reduced depth cabinets to RD-15” ● Mounts in B18 (14 3⁄4”) or wider cabinet opening ● Mounts in B15 (11 3⁄4”) or wider cabinet opening
● Unit measures 11 5⁄8” W x 19 1⁄8” H x 22 3⁄4” D ● Unit measures 10 5⁄8” W x 19 1⁄4” H x 22” D
Wastebasket Lid ● Not sized to fit reduced depth cabinets ● Not sized to fit reduced depth cabinets
● Wastebasket lid may be ordered separately

Sink Base Door Storage Unit Plastic Bag Door Storage Unit

A B A B

SBDSU15 9” 10 1⁄2” PBDSU15 9” 10 1⁄2”

SBDSU18 10 1⁄2” 13 1⁄2” PBDSU18 10 1⁄2” 13 1⁄2”

WBL35G SBDSU15 PBDSU15
WBL35W SBDSU18 PBDSU18

● Fits 35 quart plastic bin ● Field installation accessory ● Field installation accessory
● Available in green plastic (WBL35G) or white ● Natural finish solid wood ● Natural finish solid wood and wood veneer
● Two fixed shelves ● Cannot be used with Deep Roll Out Trays
plastic (WBL35W) ● Cannot be used with Deep Roll Out Trays ● Full depth shelf must be field trimmed to half-depth
● Order units individually ● Full depth shelf must be field trimmed to half-depth ● Removable white plastic tray is NOT dishwasher safe
● Lid holds can liner in place ● Removable white plastic tray is NOT dishwasher safe ● PBDSU15 mounts to 15” or 16” wide base doors
● SBDSU15 mounts to 15” or 16” wide base doors ● PBDSU18 mounts to 18” or 19” wide base doors
● SBDSU18 mounts to 18” or 19” wide base doors

Shenandoah Cabinetry Specification Guide

128 Base Cabinets: Accessories Sink Base Multi-Storage Shelf

Sink Base Multi-Storage Kit

Base Cabinets SBMS30 KIT ● SBMS30 KIT for 30” sink base only and features: SBMSS
SBMS36 KIT • 15” Sink Base Door Storage Unit (SBDSU15)
• 15” Plastic Bag Door Storage Unit (PBDSU15) ● Field installation accessory
● Field installation accessory • Sink Base Multi-Storage Shelf (SBMSS) ● 3⁄4” veneered plywood with natural finish
● Not sized to fit reduced depth cabinets • One Stainless Tilt-Out Tray Kit (STO TRAY 22) ● Invert for left or right installation
● Tilt-Out Trays and door storage unit trays
● SBMS36 KIT for 36” sink base only and features: Tilt-Out Tray Kit
are NOT dishwasher safe • 18” Sink Base Door Storage Unit (SBDSU18)
• 18” Plastic Bag Door Storage Unit (PBDSU18)
• Sink Base Multi-Storage Shelf (SBMSS)
• Two Stainless Tilt-Out Tray Kits (STO TRAY 11)

Heat Shield Kit

HSK TO TRAY 11 STO TRAY 11
TO TRAY 14 STO TRAY 14
● Field installation accessory TO TRAY 22 STO TRAY 22
● Available for White Thermo Foil door styles only
● Recommended for use as a heat shield for all ● Field installation accessory
● Kit features tray and one pair of scissor hinges
White Thermo Foil door styles ● Order units individually
● Protects doors and drawer fronts from adjacent ● TO TRAY 11 or STO TRAY 11:

heat source (built-in ovens, under counter ovens, Order one unit for SB18
drop-in or free-standing ranges) Order two units for SB33 or SB36
● Kit features: ● TO TRAY 14 or STO TRAY 11:
Two white 1⁄16” metal heat shields Order one unit for SB21, SB24, SB27 or CSF42
One strip of wood QM8 WD molding shield Order two units for SB39, SB42 or SB48
(not required for Base installation) ● TO TRAY 22 or STO TRAY 11:
Order one unit for SB30
Construction Options (see page 43): ● = Available for all SKUs ■ = Available for selected SKUs ● Sink Front units match Sink Base sizes as noted
above
● Tilt-Out Trays are NOT dishwasher safe