Day 01 » Introduction of Revit Interface » Customize Revit interface » Setting up short cuts, QAT, Display and File Locations » Revit File Types (RFT, RTE, RFA, RVT, ADSKLIB, IFC) and manage files » Hierarchy of Revit element. » Instance Properties and Type Properties » Stating new Project with Project templates Day 02 » Introduction of BIM and Revit Architecture » Features and Benefits of Revit Architecture » Essential modification tools of Revit » Move (MV) » Copy (CO) » Paste » Editing Pasted Elements » Paste Aligned » Create Similar » Rotate » Mirror » Array » Scale Trim / Extend » Align tool Day 03 Levels (LL) and Grids (GR) » Creating of Levels » Modifying Levels » Level Properties » Creating views and enabling views » Constrain Level Lines » Remove Level Lines » Creating of Levels » Modifying Levels » Constrain Level Lines » Section Box and Scope Box Architectural Walls » Create Basic wall with different shapes » Adjust walls with dimension » Wall structure and Compound walls » Wall Modification » Wall Joints » Wall Sweep and reveals » Advance Wall architecture tips » Slanted wall » Types of curtain walls » Embedded wall » Create Curtain wall » Curtain Grids » Create custom mullion www.cadacademy.lk 02
Day 04 Structural and Architectural Columns / Wall Foundation (RRM) /Isolated Footings and Beam » Create Stacked wall » Create Rubble Wall foundation » Import Structural foundation, Piles and pile cap, Structural Columns and structural framing. » Modify and place Isolated Footing » Modify and Place Architectural Columns and Structural columns » Modify and place Structural Beam » Beam Orientation, » Modify XYZ Justification and offset. Floor » Creating Architectural Floor and Structural Floor » Create floor types and Modify floor structure » Manage Slop arrow » Create Sub elements and edit elements of the floor Day 05 Staircase Designs » Understanding the parts of Stair Case » Understanding of term and definitions of stair designs » Assembled Stairs » Monolithic Stairs (In place Staircase) » Precast stairs » Edit and Modify Stair treads and risers » Create and Modify Landing » Right Support, Left support (Carriege and » Middle support » “L” Shape Stairs » “T” Shape Stairs » Multi story stairs » Aligned Stairs » Suspended Stairs » Industrial type stairs » Stair Beginning and finish » Add risers and Move risers » Create your own designs with Sketches » Create double landing stairs 03 www.cadacademy.lk
Day 06 Advance Railings » Understanding anatomy of the railing » Understanding of term and definitions of railing » Hosting of Railing » Modify Balusters and Post » Modify of Intermediate railing » Modify Top rail » Modify hand rail » Railing Extensions in start and finish » Different Railing Types » Use Advance railing Suspended Ceiling » Modify Ceiling structure » Create Automatic Ceiling » Create Sketched Ceiling » Manage Slope arrow » Aligned Ceiling Panels Day 07 Paints, Materials, textures and mapping » Understanding the terms of materials paints and textures » Create Project material » Modify identity data » Understanding of graphics and appearance. » Thermal and physical properties » Material library » Using Adsklib file » Import and export material library » Create paints » Split face and joints » Apply paint in different faces » Create new material duplicate and edit properties » Use asset browser » Understanding pbr textures and color maps » Download PBR texture files » Create stone paving texture » Import and Place decals » Hatch patterns and masking » Line types, line styles and line thickness » Create detail lines 04 www.cadacademy.lk
Day 08 » Import Auto CAD File, Image File, PDF and manage Revit Links » Topography design » Create topographical maps by importing csv and AutoCAD file » Import and place doors and windows » Import components families » Edit properties and placement » Interior Furniture Arrangement » Lighting Placement » Exterior Components and plants » View Management » Understanding the concept and use of underlay, view range and plan region. » Visibility graphic override Day 09 Family Editor Part 1 » Understanding the different and use of Family Template » Understanding the Different of Massing, Family Editor interface and project interface » Understanding characteristics of reference plane, Reference Line and Model Lines. » Create Modify and use of Extrusion » Create Modify and use of Blend » Create Modify and use of Revolve » Create Modify and use of Sweep » Create Modify and use of Swept blend » Void Forms and Solid Forms » Create and study of Parametric Box Family » Create Fully Parametric Dining Table Family Day 10 Family Editor Part 2 » Understanding Advance Family Editor Techniques by Creating Parametric and Nested Computer Table Family. » Create Dimension parameter » Cut Geometry / Join Geometry » Profile family template » Using of Profile Family » Create Nested family » Parametric Model Text » Symbolic Lines » Visibility Parameter » Modify View Visibility Settings » Create Formula and Lock dimensions » Model In place – Create Façade, Pot and wall decorations » Create Louvered Door » Create Louvered Window (3 Panel) » Curtain Family » LED Strip Light Family 05 www.cadacademy.lk
Day 11 Roof Designs » Create Roof Modify Roof Structure » Roof by foot print » Understanding overhang and defines slope » Create Flat roof » Create Open Gable roof » Create Sand Box roof » Create Hip and Valley roof » Create Combination roof » Create Dutch Gable roof » Create mansard roof » Create Gambrel roof » Create complex hip and valley roof » Create Dome, summer hut, cone shape roof » Join unjoin roof » Roof Opening and dormer opening » Create Dormer roof » Roof by massing Day 12 Roof Detailing » Create Timber Wall plate, Ridge Plate, Rafters and Batton Family » Place Wall plates » Place Ridge plate » Coping and trimming » Place Rafters by Beam systems » Understanding beam system modification » Place Batton » modify and place valence board and gutter » Create soffit and soffit by model in place » Create rafter embedded finishing ceiling » Place down pipes » Create roof tile family » Create parametric ridge place family. Day 13 » Introduction of BIM Concepts » Understanding work sets, collaboration » Understanding of work sharing between departments » Understanding concept of project phasing (BIM 4D) » Create your own project template » Explain and start BIM Project » Create view template 06 www.cadacademy.lk
Day 14 BIM Project – Session 1 » Create Levels and Grids » Create Structural Modeling views » Model structural elements » Setting up rebar cover » Create Isolated footings (F1, F2, F3) » Create Plinth beam (PB 1, PB2, PB 3) » Create RRM Wall (retaining wall) » Create Slab Beams » Create Columns Day 15 » Create Architectural Modeling views » Create External and internal walls » external / internal plaster » Place Door and windows » Create structural and architectural floors (Floor Slab with Finishers) Day 16 » Create Skirtings » Create Stair Case (Monolithic and assembled Stair) » Create Railings and parapet wall » Create wall decorations » Add paints, decals and texturing Day 17 » Model topography » Create perimeter wall with entrance gate » Design interior features in Bed room, office room » Create your own ceiling design » Use sketch-up 3d warehouse in Revit » Use enscape » Create enscaape images Day 18 » Reinforcement Modeling » Reinforcement settings » Rebar shapes » Rebar families and types » Model rebar for isolated footing (F1, F2, F3) » Model Rebar for Columns (C1, C2, C3, C1.1, C1.2 etc.…) Day 19 » Model Rebar for Structural Beams (Plinth Beam, Slab beam) » Model Structural slab (1st Floor, 2nd Floor and roof top) » Model Staircase reinforcement 07 www.cadacademy.lk
Day 20 » Create your Own title block (A0, A1, A3) » Scale Site plan (1:1000, 1:500) » Create setting out drawing » Foundation Layout drawing » 1st floor Beam Layout, 2nd Floor Bam Layout Drawing » Foundation Detail drawings » Slab reinforcement drawing Day 21 » Slab reinforcement drawing » Beam Longitudinal section and cross sections » Create Architectural Drawing set » Create Ground Floor 1st Floor and 2nd Floor Plans » Create Room Lagend and area plans Day 22 » Create section plan » Create Elevations » Create Opening legend » Create Draught views » Create Furniture Layout drawing » Create Room Layout drawing » Create Council Drawing » 3D detail drawing Day 23 » Concept of revit scheduling » Understanding the difference of Quantity takeoff and Material takeoff » Create Door Schedule » Manage appearance of schedule » Create window Schedule » Create Foundation schedule » Create calculated parameter, automatic total and formular » Create Structural column Schedule » Create Structural Beam Schedule » Create RCC Slab Schedule and Floor concrete schedule » Create Floor finishers Schedule » Create wall Schedule » Create wall skirting Schedule » Create Paining Schedule Day 24 » Lumion Interface » Revit to Lumion live sync » Export and live sync project file » Creating of views and camera angles » Lumion Objects » Lumion environment settings » Texturing and texture modification » Lighting 08 www.cadacademy.lk