T-ISS IMO Catalog 2018-2019

51

Open Carefully Crew Area Door swings outward Open door slowly

SCS 0006 SCS 0007 SCS 0008 SCS 0009

15x20 cm. 15x20 cm. 15x20 cm. 15x20 cm.

No smoking in bed No smoking in elevator No garbage overboard No workwear

SCS 0010 SCS 0011 SCS 0012 SCS 0013

15x20 cm. 15x20 cm. 10x30 cm. 10x30 cm.

SOPEP SOPEP Text Door swings outward Open door slowly

SCS 0014 SCS 0015 SCS 0016 SCS 0017
30x10 cm. 30x10 cm.
15x15 cm. 15x15 cm.
Please
close door Quiet
please
quietly people
sleeping

52

Battery charging Asphyxiating atmosphere Sudden loud noise

53

54

HS 1020

20x15 cm.
ISSA 47.576.20
IMPA 33.7620

55

Caution Defective Equipment Asbestos Current on
TT 0002 TT 0003 TT 0004
TT 0001 7 x 15 cm. 7 x 15 cm. 7 x 15 cm.
7 x 15 cm.

CAUTION ISSA 47.525.01 DEFECTIVE ISSA 47.525.02 ASBESTOS ISSA 47.525.03 CURRENT ISSA 47.525.04
IMPA 33.2501 EQUIPMENT IMPA 33.2502 IMPA 33.2503 ON IMPA 33.2504
Authorised by Authorised by
Date Authorised by TT 0006 Date Authorised by
Date 7 x 15 cm.. Date

Harmful Irritant Corrosive Flammable
TT 0005 TT 0007 TT 0008
7 x 15 cm. 7 x 15 cm. 7 x 15 cm.

HARMFUL ISSA 47.525.05 IRRITANT ISSA 47.525.06 CORROSIVE ISSA 47.525.07 FLAMMABLE ISSA 47.525.08
IMPA 33.2505 IMPA 33.2506 IMPA 33.2507 IMPA 33.2508
Authorised by Authorised by Authorised by Authorised by
Date Date Date Date

Explosive Poison Gas
TT 0009 TT 0011
7 x 15 cm. TT 0010 7 x 15 cm.
7 x 15 cm.

EXPLOSIVE ISSA 47.525.09 POISON ISSA 47.525.10 GAS ISSA 47.525.41
IMPA 33.2509 IMPA 33.2510 IMPA 33.2541
Authorised by Authorised by Authorised by
Date Date Date

Do not close valve Do not open valve Do not close Do not open
TT 0012 TT 0013 TT 0014 TT 0015
7 x 15 cm. 7 x 15 cm. 7 x 15 cm. 7 x 15 cm.

DO NOT ISSA 47.525.20 DO NOT ISSA 47.525.21 DO NOT ISSA 47.525.22 DO NOT ISSA 47.525.23
IMPA 33.2520 IMPA 33.2521 CLOSE IMPA 33.2522 OPEN IMPA 33.2523
CLOSE VALVE OPEN VALVE
Authorised by Authorised by
Authorised by Authorised by Date Date
Date Date

Do not move Do not start Do not use Do not start men working
TT 0016 TT 0017 TT 0018 TT 0019
7 x 15 cm. 7 x 15 cm. 7 x 15 cm. 7 x 15 cm.

DO NOT ISSA 47.525.24 DO NOT ISSA 47.525.25 DO NOT ISSA 47.525.26 DO NOT ISSA 47.525.27
MOVE IMPA 33.2524 START IMPA 33.2525 USE IMPA 33.2526 START IMPA 33.2527

Authorised by Authorised by Authorised by MEN WORKING
Date Date Date ON MACHINE

Authorised by

Date

Do not use out of order Do not operate Do not touch
TT 0020 TT 0021 TT 0022
7 x 15 cm. 7 x 15 cm. 7 x 15 cm.

DO NOT USE ISSA 47.525.28 DO NOT ISSA 47.525.30 DO NOT ISSA 47.525.31
IMPA 33.2528 OPERATE IMPA 33.2530 TOUCH IMPA 33.2531
OUT OF
ORDER Authorised by Authorised by
Date Date
Authorised by
Date

56

Self-adhesive Self-locking
seal labels, seal labels, can
break when be used
attempting to without any
peel o�. 66 tools. 100
pieces / roll. pieces / pack.

ISPS 009 ISSA: -
Size: 30x80 cm IMPA: -

ISPS 008 ISSA: 47.527.00 ISPS 010 ISSA: -
Size: 10 m rolls IMPA: 33.2700
Size: 100 pieces / pack IMPA: -

ISPS 007 ISSA: 47.527.03 ISPS 007 ISSA: 47.527.03 ISPS 007 ISSA: 47.527.03
Size: 15x30 cm IMPA: 33.2703 Size: 15x30 cm IMPA: 33.2703 Size: 15x30 cm IMPA: 33.2703

ISPS 001 ISPS 002 ISPS 003 ISPS 004
Size: 50x25 mm Size: 50x25 mm Size: 50x25 mm Size: 50x25 mm
Stickers - sold in Stickers - sold in Stickers - sold in Stickers - sold in
sheets of 10 pieces / sheets of 10 pieces / sheets of 10 pieces / sheets of 10 pieces /
sheet. sheet. sheet. sheet.

ISSA: 47.528.90 ISSA: 47.528.91 ISSA: 47.528.92 ISSA: 47.528.93
IMPA: 33.2890 IMPA: 33.2891 IMPA: 33.2892 IMPA: 33.2893

ISPS 013 ISSA: 47.528.95
Size: 10x30 cm IMPA: 33.2895

ISPS 011 ISSA: 47.529.24 ISPS 012 ISSA: 47.528.24
Size: 30x20 cm IMPA: 33.2924 Size: 30x20 cm IMPA: 33.2824

ISPS 014 ISSA: -
Size: 10x30 cm IMPA: -

ISPS 015 ISSA: - ISPS 016 ISSA: -
Size: 10x30 cm IMPA: - Size: 10x30 cm IMPA: -

ISPS 017 ISSA: 47.529.07
Size: 10x30 cm IMPA: 33.2907

57

ISPS 018 ISSA: 47.558.55 ISPS 019 ISSA: 47.558.25 ISPS 020 ISSA: 47.558.24 ISPS 021 ISSA: 47.585.02

Size: 10x30 cm IMPA: 33.5855 Size: 10x30 cm IMPA: 33.5825 Size: 10x30 cm IMPA: 33.5824 Size: 20x20 cm IMPA: 33.8502

ISPS 022 ISSA: 47.585.42 ISPS 023 ISSA: 47.585.45 ISPS 025 ISSA: 47.585.44 ISPS 026 ISSA: 47.586.92

Size: 10x30 cm IMPA: 33.8542 Size: 10x30 cm IMPA: 33.8545 Size: 10x30 cm IMPA: 33.8544 Size: 10x30 cm IMPA: 33.8692

ISPS 027 ISSA: 47.586.91 ISPS 028 ISSA: 47.586.90 ISPS 029 ISSA: -

Size: 10x30 cm IMPA: 33.8691 Size: 10x30 cm IMPA: 33.8690 Size: 10x30 cm IMPA: -

ISPS 030 ISSA: - ISPS 031 ISSA: 47.586.95 ISPS 032 ISSA: - ISPS 035 ISSA: 47.531.40

Size: 20x30 cm IMPA: - Size: 20x30 cm IMPA: 33.8695 Size: 20x30 cm IMPA: - Size: 30x40 cm IMPA: 33.3140

ISPS 1001 ISSA: 47.528.96 ISPS 1002 ISSA: 47.529.74 ISPS 036 ISSA: 47.528.89

Size: 35x30 cm IMPA: 33.2896 Size: 15x15 cm IMPA: 33.2974 Size: 15x15 cm IMPA: 33.2889

ISPS 0033 ISSA: 47.531.38 ISPS 0034 ISSA: 47.531.39

Size: 60x40 cm IMPA: 33.3138 Size: 30x30 cm IMPA: 33.3139

58

Information signs

V-Brackets VB1515A 15 x 15 cm Flag brackets FB1515A 15 x 15 cm
VB1530A 15 x 30 cm FB1530A 15 x 30 cm

Other sizes optional, Other sizes optional,
material white coated material white coated
aluminium. aluminium.

59

According to Solasregulations, informationsigns have to be placed in the direct area of rescue and life-
saving devices. They must explain function, control and actions to be taken. Safe Sign designs for this
training and instructionposters which come in a outdoor high quality self adhesive vinyl film. The size is in
general 30x40 cm. On special request we supply these signs in Bilangual. In general they are with
english text. Furtheron there is also the possibility to receive these signs as reverse printed transparent
plates which guarantees a lifetime of at least 10 years outdoors.

47.510.43 33.1543

Lifebuoy Light

60

Rescue boat launching procedure Discharge of oil prohibited In the event of an oil pollution.....

SP 0019 ISSA 47.510.01 SP 0020 ISSA 47.510.43 SP 0021 ISSA
30x20 cm. IMPA 33.1501 30x20 cm. IMPA 33.1543 30x20 cm. IMPA

IN THE EVENT OF AN
OIL POLLUTION INCIDENT, OR
THREAT OF A POLLUTION INCIDENT
IMMEDIATELY INFORM THE MASTER

AND OFFICER ON DUTY.
FOR FURTHER HANDLING
FOLLOW THE GUIDELINES OF THE
SHIPBOARD OIL POLLUTION PLAN.

It is forbidden to throw Drug warning notice Drug and alcohol Warning Notice
garbage overboard SP 0005 ISSA 47.510.37 warning notice You are warned........
30x20 cm. IMPA 33.1537
SP 0001 ISSA 47.510.42 SP 0006 ISSA 47.510.39 SP 0007 ISSA 47.510.41
30x20 cm. IMPA 33.1542 30x20 cm. IMPA 33.1539 30x20 cm. IMPA 33.1541

Regulations Discharge of garbage Clip Frame Silver Clip Frame Silver
Garbage Disposal into the sea anodished finnish anodished finnish
SP 0102 ISSA SP 0103 ISSA
SP 0008 ISSA 47.510.29 SP 0090 ISSA A4 IMPA A3 IMPA
same as TP048 IMPA 30x20 cm. IMPA
40x30 cm. A4 A3

Annex V of Marpol 2013

DISPOSAL IS PROHIBITED DISPOSAL IS PROHIBITED
DISPOSAL IS PROHIBITED DISPOSAL IS PROHIBITED
DISPOSAL IS PROHIBITED DISPOSAL IS PROHIBITED
DISPOSAL IS PROHIBITED DISPOSAL IS PROHIBITED

DISPOSAL IS PROHIBITED

Other sizes available on request

Do not throw Do not throw Do not smoke Do not drink No smoking No mobile No access Crew only
foreign articles foreign objects in bed SP 0012 SP 0013 phones Crew only SP 0016
20x15 cm. 20x15 cm. 20x15 cm.
SP 0009 SP 0010 SP 0011 SP 0014 SP 0015
20x15 cm. 20x15 cm. 20x15 cm. 20x15 cm. 20x15 cm.

61

SP 0002 ISSA: 47.510.10 SP 0003 ISSA: 47.510.10 SP 0004 ISSA: 47.510.12
30x40 cm IMPA: 33.1510 30x40 cm IMPA: 33.1510 30x40 cm IMPA: 33.1512

SP 0023 ISSA: 47.510.48 SP 0024 ISSA: 47.510.49 SP 0017 ISSA: 47.510.49
30x40 cm IMPA: 33.1548 30x40 cm IMPA: 33.1549 30x40 cm IMPA: 33.1549

TP052 ISSA: - SP 0025 ISSA: - SP 0022 ISSA: 47.510.29
30x40 cm IMPA: - 30x40 cm IMPA: - 30x40 cm IMPA: -

62

47.531.08 33.3108

47.531.11 33.3111 - 33.3013

47.531.00 33.3100 47.531.01 33.3101 47.531.02 33.3102 47.531.03 33.3103
47.531.09 33.3109 47.531.12 33.3112 47.531.04 33.3104
47.531.05 33.3105 47.531.10 33.3110
47.531.14 33.3114 47.585.22 33.8522 - 33.3013

63

64

Signalflag A Signalflag B Signalflag C Signalflag D

FL001 FL002 FL003 FL004

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150

ISSA 37.1511 ISSA 37.1512 ISSA 37.1513 ISSA 37.1514
IMPA 49.131.5 IMPA 49.131.6 IMPA 49.131.7 IMPA 49.131.8

Signalflag E Signalflag F Signalflag G Signalflag H

FL005 FL006 FL007 FL008

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1515 ISSA 37.1516 ISSA 37.1517 ISSA 37.1518
IMPA 49.131.9 IMPA 49.132.0 IMPA 49.132.1 IMPA 49.132.2

Signalflag I Signalflag J Signalflag K Signalflag L

FL009 FL010 FL011 FL012

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1519 ISSA 37.1520 ISSA 37.1521 ISSA 37.1522
IMPA 49.132.3 IMPA 49.132.4 IMPA 49.132.5 IMPA 49.132.6

Signalflag M Signalflag N Signalflag O Signalflag P

FL013 FL014 FL015 FL016

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1523 ISSA 37.1524 ISSA 37.1525 ISSA 37.1526
IMPA 49.132.7 IMPA 49.132.8 IMPA 49.132.9 IMPA 49.133.0

Signalflag Q Signalflag R Signalflag S Signalflag T

FL017 FL018 FL019 FL020

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1527 ISSA 37.1528 ISSA 37.1529 ISSA 37.1530
IMPA 49.133.1 IMPA 49.133.2 IMPA 49.133.3 IMPA 49.133.4

Signalflag U Signalflag V Signalflag W Signalflag X

FL021 FL022 FL023 FL024

Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1531 ISSA 37.1532 ISSA 37.1533 ISSA 37.1534
IMPA 49.133.5 IMPA 49.133.6 IMPA 49.133.7 IMPA 49.133.8

Signalflag Y Signalflag Z

FL025 FL026

Size: 100 x 150 cm Size: 100 x 150 cm

ISSA 37.1535 ISSA 37.1536
IMPA 49.133.8 IMPA 49.133.9

65

66

General Description - Low Location Light
In 2009 T-ISS started an innovation project with the objective to improve the quality and environmental
footprint of photo luminescent signs and low location light strips. Today most sign makers use PVC,
despite the fact that PVC is the single most environmentally damaging of all plastics.
PVC contains halogens and their toxicity of smoke is of highest concern within enclosed spaces, which
you will find on-board any ship or platform.
During our innovation project we managed to replace PVC with a safe material, a modified recyclable
polymer, which is free of halogens. Besides this new material the innovation went on, and we managed
to innovate our printing process in such a way that the expected life of SafeSign signs is up to 5 times
longer than the average. The last upside is the visual appearance, SafeSign signs and low location light
strips have a high quality glossy finish, which is easy to clean.
The use of these new materials and techniques helped us to achieve innovative product which is also
more economical and looks better.

Light Line Systems
Alternatively to the commonly used profile/insert low location light strips, SafeSign has developed Light Line
strips. These Wheelmark approved, self-adhesive strips are an excellent alternative to the profile systems.
Light Line strips are manufactured according to the same high standard as Safe Sign signs; back printed on
a modified polymer plastic which gives a glossy, easy to wipe clean, finish. No PVC, no halogens and 10
years warrantee against discoloration and on the photo luminescent properties.
This is the solution to refurbish existing systems which do not meet the requirements. The Light Line strips
can easily be fixed on top of the existing system by your crew or yard, due to its self-adhesive backing. Upon
request we can also manufacture Light Line strips to your requirements, like non-standard colours, sizes
and/or afterglow properties, always in compliance and always in the same high, environmentally friendly
quality.

67

T-ISS is a specialist for LLL Systems on Cruise liners & Ferries.
IMO & Solas regulations require that ships carrying more than
36 passengers shall be fitted with Low Location Lighting.
Resolution A.752(18) & IS015370 details system requirements
and testing procedures:

● The installed material must be Wheelmark approved.
● All escape routes, including stairs, must be marked by

LLL.
● Where stairs or corridors are more than 2m wide, LLL

ships should be provided on both sides.
● 'Exit' signs should be provided at each exit, located on

the same side as the door handle.
● Fire and watertight doors should be marked to show

how the door opens.
● Systems must have their luminescence tested at least

once every 5 years.

The LightLine LLL System is the easiest & most cost e�ective system to install, requiring only the
application of the tape to the bulkhead and the positioning of LLL signs at the appropriate places.
Our LightLine Strips have a green lining at top and bottom of the strip which gives it a high class
appearance. All LightLine strips are DNVGL certified.

LightLine LLL Profile System: is a system which comprises of an extruded aluminium carrier and
rigid photo luminescent strips. Our standard is an angle profile with a 50mm wide visible strip. The
performance of the rigid panels is certified by DNVGL and easy to install.

We can also create other shaped LLL systems according to the demands of ship-owners, yards and
architects. Standard LightLine strips are reversed printed in order to prevent damages to the photo
luminescent layer, these are easy to clean and have a high quality appearance.

We participate with many ship-
owners, yards and architects to
find the optimal solution in design
and quality of the Low Location
Light system for their new-builds
and refurbishments.

For all your enquiries regarding
Low Location Light systems,
please contact us.

68

General Description - LLL P ro les

For use as insert in SafeSign aluminium profiles we o�erthree di�erentqualities; XL, XXL and XXXL, all
exeed IMO regulations on afterglow. As a base material for these strips there are two options; aluminium or
PVC.

Art.No. Size: Quality: Photo luminescent insert on aluminium
LLL 100x5cm XL Photo luminescent insert on aluminium
LLL 100x5cm XXL Photo luminescent insert on aluminium
LLL 100x5cm XXX
LLL 100x5cm XL Photo luminescent insert on PVC
LLL 100x5cm XXL Photo luminescent insert on PVC
LLL 100x5cm XXX Photo luminescent insert on PVC
LLL 100x3cm XL Photo luminescent insert on aluminium
LLL 100x3cm XXL Photo luminescent insert on aluminium
LLL 100x3cm XXX Photo luminescent insert on aluminium
LLL 100x3cm XL Photo luminescent insert on PVC
LLL 100x3cm XXL Photo luminescent insert on PVC
LLL 100x3cm XXX Photo luminescent insert on PVC

Technical Data

Material: anodised aluminium or PVC strip
Fixation: inserted in SafeSign wall profile

Luminance P roperties Luminescent int er removing the exis t)

Applicable Standards and 10 minutes 60 minutes

R feSigs 23 mcd/m2 3 mcd/m2
15 mcd/m2 2 mcd/m2
DIN 67 510-4 15 mcd/m2 2 mcd/m2
IMO Res. A. 752(18) 75 mcd/m2 10 mcd/m2

ISO 15370 T.B.A. T.B.A.
SafeSign XL T.B.A. T.B.A.
SafeSign XXL
SafeSign XXX

69

General Description - LLL strips

We offer several types of LLL strips.Each one with their own special features and specifications.
This way we can deliver the perfect, optimized LLL system for every unique application.

Standard LLL Strips Light Line LLL Strips

The strips are made out of PVC, Alu or PET T-ISS produces a special wheelmark
material. These materials will be used for approved adhesive strip. These strips are
various applications and locations. We excellent for direct fixation to flat surfaces
supply three qualities of afterglow material: and are used on various ships around the
Safe Sign Light Line XL, XXL and XXXL. The world. Examples of applications are
higher the quality, the better the afterglow corridors, staircases, stairmarking, etcetera.
lighting will be. The strips are non-halogen, long lasting and
good looking.

Special LLL Strips LLL Corner Pro les

Upon request we produce special LLL We supply various profile and insert
systems. Different colors, materials and systems. Due to coöperation with partners
afterglow effects all can be produced upon we can provide flat profiles in various sizes.
request by architects, owners and Angled profiles in various sizes and colors. In
classifications. general all materials are anodised
aluminium, unless other materials are
needed.

70

General Description

T-ISS manufactures various glow-in-the-dark photoluminescent tapes. These tapes are being made using
PVC, PU and PET materials.These are applied in various ways so that the tapes can be used both in- and
outdoor, and are weather-resistant. PU material is used for applications with rounded surfaces and locations
where heavy duty materials are required.

0575/12

Product No.: Size: ISSA No. Impa No. Color
47.520.14 332014
ET-4N Neutral 40 mm x 10 mtr
ET-4A Arrow 40 mm x 10 mtr 47.520.24 332024
ET-4L* Escape direction 40 mm x 10 mtr 47.520.34 332034
ET-4G Green Zebra 40 mm x 10 mtr 47.520.54 332054
ET-4R Red Zebra 40 mm x 10 mtr 47.520.44 332044
ET-4S Black Zebra 40 mm x 10 mtr

*Note: ET-4L is delivered with 10 stickers "Left" and 10 stickers "Right" to be installed on LLL-line where needed.

Transperant stickers - T o be used in LLL systems 50x150 mm.
100x50 mm.

LLL-10/1 LLL-10/2 LLL-10/3 LLL-10/4
ISSA: 47.523.82 ISSA: 47.523.83 ISSA: 47.523.80 ISSA: 47.523.81
IMPA: 33.2382 IMPA: 33.2383 IMPA: 33.2380 IMPA: 33.2381

LLL-10/5 LLL-10/6 LLL-10/7 LLL-10/8
ISSA: 47.523.87 ISSA: 47.523.86
IMPA: 33.2387 IMPA: 33.2386

Stickers in other sizes, colors and symbols available on request

Low Location Light Arrows

LLL-1 LLL-21

15x5 cm. 30x5 cm.

LLL-7 LLL-22

25x9 cm. 30x5 cm.

71

General Description - Aluminium P ro les

Light Line, Low Location Light systems are certified by DNVGL to comply with MED. We supply
various profiles and insert systems, from flat profiles to angled profiles, in di�erent sizes and
colours. Our standard stocked profiles are anodised aluminium, other colours or types we o�er
on request. Our photo luminescent inserts can be delivered in 3 qualities; XL, XXL and >00<, all
qualities exceed the IMO requirements on afterglow.

Art.No. Size: Aluminium profile with an 12 degree angle excluding photo luminescent inserts.
LLL50 100x5,5cm Right end-cap for aluminium profile LLL50
LLL50R Le ap foraluminium profile LLL50
LLL50L 100x5cm
LLL50F Aluminium profile flat, excluding photo luminescent inserts.
LLL50FR 100x3cm Right end-cap for aluminium profile LLL50F
LLL50FL Le ap foraluminium profile LLL50F
LLL30
LLL30R Aluminium profile flat, excluding photo luminescent inserts.
LLL30L Right end-cap for aluminium profile LLL30
Le ap foraluminium profile LLL30

Technical Data - Aluminium P ro les

Material: anodised aluminium
Fixation: screws, double sided tape or adhesive
Qualities: XL, XXL and XXXL

72

General Description

T-ISS Photolumeniscent tapes are an excellent method to indicate escape ways on board of platforms
ferries, RoRo, tankers and cruiseliners.The product complies with the IMO & Solas regualtions and has an
approval by Lloyds. High tack adhesive with excellent ageing and weather resistant properties specifically
designed for mounting on board of vessels.

Art.No. Descrip Size: IMPA Number:
33.20.14
LT001 LLL Tape neutral 40mm x 10mtr
33.20.24
LT002 LLL Tape with arrow 40mm x 10mtr 33.20.34
33.20.54
LT003 LLL Tape + esc. dir 40mm x 10mtr 33.20.44

LT004 LLL Tape green/zebra 40mm x 10mtr

LT005 LLL Tape red/zebra 40mm x 10mtr

LT006 LLL Tape black/zebra 40mm x 10mtr

Other sizes available on request, from 20 up to 1000 mm

Technical Data

Property Test Method Results
Average thickness Micrometer 0.175mm
Glossmeter 85°
Average gloss 95°
Tensile strength Instron at 30cm (12’’/minute)
5.0kg (11lb)
Elonga Instron at 30cm (12’’/minute)
24%

Stairnosemarker "antiskid" Photoluminescent Traildots "antiskid"

Photoluminescent stairnoses Photoluminescent aluminium foil
for marking stairs in an escape route. for marking of escape routes.
Fixation: 1mm foamtape. Anti Skid type.
With 90 degrees angle. Delivered with strong 3M tape.

Art.no: 240x 50 mm. Art.no: 99200 Ø200mm
38601 99100 Ø90mm

Art.nr.: LLL-11

This PU guideline is extremely flexible and can be used for marking
Stairs, Stairnoses, Contourmarking. It has an Antislip surface and
is resistant against most chemicals. Can be fixed with doublesided
tape or glue. Heavy duty surface.

Size: Stripwide: 40mm lnsertstrip: 35mm
Length:
Afterglow: 10 meter rolls
Decaytime:
10 min. 200 mcd/m2 60 min. 28 mcd/m2

2900 min.

73

5784

Introduction
Solastape.com is for almost 15 years known for quality tapes. T-ISS manufactures these specialized tapes
for use in marine and o�shoremarket. We have developed high tack tapes for many di�erentapplications.
Our tapes are made of the best quality materials and designed to be used in the harsh marine environment.
Where applicable, all tapes have all required certification from the major classification societies as well as
USCG. T-ISS tape will always be in compliance with all IMO ans Solas regulation and carries the wheelmark
where applicable. All tapes are available through our would-wide network of distributors.

Quality T apes
Solas Flex Tape
T-ISS Retro Reflective Solas Tape is intended for reflectorizing equipment.
Spray Stop Tape
Spray Stop Anti-Splashing Tape is used to prevent spray from tubes.
Pipe Repair Tape
PipeRepair Tape is a complete kit designed to repair leaking, cracked or broken pipes.
Foam Tape
Foam Tape is a high-quality fixation tape.
Hatch Cover Tape
Hatch Cover Tape is designed to seal hatchcover rims to prevent damage.
Drip Stop Tape
Drip Stop Tape is used to prevent leakage, saltage and corrosion.
Heat Stop Tape
HeatStop Tape is a basalt fibertape used for heat insulation.
Cor Stop Tape
CorStop Tape is developed to cover surfaces and prevent corrosion.
Slip Stop Tape
SlipStop Tape is indoor/outdoor tape used to prevent skidding.
Floor Tape
Floor Tape is a special tape used to mark specific area's on floors.
Reflective Tape
Warning Tape is used to mark specific dangerous area’s.
Reflective Tape
Warning Tape is used to mark specific dangerous area’s.
Ruststop Tape
Ruststop is a corrosion protection tape.

75

General Description

T-ISS retro reflective tape is used for reflectorizing SOLAS life support equipment such as life
vests, jackets, and rafts. T-ISS SolasFlex is an encapsulated lens type sheeting with a flexible
and highly transparent plastic film. Our tape has been specially designed for the marine and
o�shoreindustry. It ensures long durabllity, high brightness and anti-delamination. All products
are comprised of an encapsulated lens optical design that provides high reflectivity over a wide
range of entrance angles, whether dry or wet. All products are silver in color under daytime
viewing conditions and reflect a bright white.

It conforms to IMO Res. A658(16) and meets USCG specification 46 CFR Part 164. it is
approved wheelmark, USCG, RR and KR. T-ISS SolasFlex is type 2 approved, this means in can
be used indoor as well as outdoor and is suitable for all applications. SolasFlex is a Type 2
solasgrade tape for continious outdoor exposure.

Please note; reflective tape with a type 1 approval can only be used on stored lifejackets and life
rafts, this is not suitable for buoy; lifeboats and other life saving equipment which is exposed to
the environment.

Technical Data

Art. No: C5512 SolasFlex Adhesive

IMPA: 33.00.89

ISSA: 47.007.04
SolasFlex is also available as a stichable tape.

Size: 50 mm x 45,7 m
Thickness: 0,1 mm
Weight: 1,2 kg per roll

76

General Description

SprayStop Standard and Spray Stop 50+ anti-splash tape is used for applications in the marine & o�shore
industry. This high-tech laminated multilayer aluminium tape, has been designed by safety specialists in
order to prevent spray outs of hazardous liquids (oil / fuel) from tubing systems. These liquids can cause
extremely dangerous situations like fires, explosions or other dangerous situations.
According to the SOLAS amendment chapter 2-2 regulation, ships are to apply appropriate protection
system to prevent leakage and splashing of flammable oil from FO, LO hydraulic and other piping systems.

This product complies with the IMO A653 (6) regulations. Spray Stop standard can be used up to 15 bar
pressure, Spray Stop 50+ up to 50 bar pressure. Approved by DNV, GL, LR, Rina, CCS, ClassNK, ABS, KR.

Technical Data

Max pressure: 15 bar (50 + 50 bar)

Max temperature: +160 ºC continuously,

+200 ºC shortly

Adhesive material tolerance: -70 ~ -200 above

Adhesion: 1000 grams above,

25 mm g/f

Shelf life: 3 years when properly

stored

Art.No. Art.No. 50+ Size: Weight: Qty/Box IMPA Number:
TS001 TS501 35mm x 10m 0,1kg 28 rolls 87.18.01
TS002 TS502 50mm x 10m 0,2kg 20 rolls 87.18.02
TS008 TS508 75mm x 10m 0,25kg 13 rolls 87.18.08
TS003 TS503 100mm x 10m 0,3kg 10 rolls 87.18.04
TS004 TS504 140mm x 10m 0,4kg 7 rolls 87.18.03
TS005 TS505 250mm x 10m 0,7kg 4 rolls 87.18.07
TS006 TS506 500mm x 10m 1,8kg 2 rolls 87.18.05
TS007 TS507 1000mm x 10m 4kg 1 roll 87.18.06

77

General Description

T-ISS PipeRep is a special developed resin coated glass fiber cloth, which will set, also under
water. The fiberglass cloth tape is impregnated with a water activated resin prior to packaging.
Normal setting time is approximately 20 minutes, depending on the temperature. The activator is
normal salt or fresh water. This repair product sets even under water and because of this, it is
ideal to use in di�cult / wet applications. T-ISS PipeRep can be used for corrosion prevention,
reinforcement and electrical protection up to 16,000 volts. PipeRep will retain pressure up to
50bar on supply lines and will function under intermittent temperatures up to 250 degrees
Celsius. T-ISS PipeRep is uniquely coloured orange for easy identification of repair zones.

One pack of T-ISS PipeRep comes with:
● Pipe repair tape
● Pipe repair FastSteel putty
● One pair of protective gloves
● Sandpaper
● Instruction manual

Art.No. Size: 2’’ x 5’ Weight: Qty/Box IMPA Number: ISSA Number:
81.23.64/81.24.51
PRK002 50mm x 1,5m 3’’ x 9’ 0,1kg 40 33.00.89/81.24.52/81.23.65 75.588.01
4’’ x 15’
PRK003 75mm x 2,7m 0,2kg 40 33.00.89/81.24.53/81.23.63 75.588.03
PRK004 100mm x 3,6m 0,4kg 40 75.588.04

78

General Description

T-ISS foam mounting tapes are closed-cell, polyethylene foam, coated with a high tack / high shear acrylic
adhesive. They have superior chemical and fuel resistance, and good outdoor weatherability. They also give
excellent adhesive performance in the area of tack, sheer and adhesion. High tack permanent adhesive with
excellent ageing and weather resistant properties specifically designed for mounting and joining
nameplates, plastic trim, signs and emblems. Long term bonding performance to plastic hangers and mirror
mounting. Used on board of cruiseliners, tankers, ferries, etc. to install signage or to fix products to a flat
surface.

Product No. Size: Thickness:

DST2510 25mm x 10m 1mm

DST5010 50mm x 10m 1mm

DST1010 100mm x 10m 1mm

DST1515 150mm x 50m 1mm

DST1950 19mm x 50m 1mm

Technical Data Specifications:

Application: ● Peel Adhesion: PSTC-3 1.8 kg / 25 mm

Surface must be clean and free from ● Shear Strength: PSTC-7 Over 72 hrs
dust and grease.
Pressure sensitive adhesive must be ● Heat Resistance: Over 24 hrs
applied with a maximum of pressure in
order to achieve maximum pressure level. ● Service Temperature: -30 °C ~ 120 °C
The indicated level of performance will be
reached after a bonding period of 24 hrs
at 23 °C.

79

General Description

Extreme weather conditions can cause leakage of your hatch covers, which will lead to the
damage of cargo being transported. T-ISS HaCo Blueliner tape keeps moisture out, and ensures
a weather and fume tight hatch seal. HaCo Blueliner tape is design by specialists with 20 years of
tape experience, to seal out the elements on hatch cover rims. HaCo Blueliner tape has an
extraordinary strength, adhesion and is extremely flexible. It can be easily recognized by it’s blue
top layer of modified PE material. A material which gives the highest protection under extreme
conditions. Regulations regarding hatch covers have evolved since the investigation following
the loss of the MV Derbyshire. The Association of Classification Societies increased this strength
standard by creating its Unified Requirement § 21 in 1998.

All HaCo Blueliner tape is tested under practical environment and extreme standards. HaCo
Blueliner tape can be installed between -45 and 40 °C, and can withstand -15 to 70 °C. Rolls are
20 meter of self-adhesive SBS bitumen rubber compound, coated to a modified blue PE liner
and with a release PE Liner. Shelf life is 24 months when properly stored.

Technical Data

Characteristic: 20 meters of self-adhesive SBS
bitumenrubber compound coated to a modified blue
PE linerand release PE Liner.

Temperature resistance: Between -15 to +70 C
Installation temperature: +5 C to +40 C
Shelf life: 24 months properly stored

Art.No. Size: Rolls per Box: Box Weight: Box per Pallet: IMPA Number: ISSA Number:
HC2100 3 17kg
HC2150 100mm x 20m x 2mm 2 17kg 48 23.24.52 43.003.02

150mm x 20m x 2mm 48 23.24.53 43.003.03

80

General Description - Drip Stop T ape

Simple to use. Drip Stop Tape is not using any adhesive components and it will not stick to the hand.
Drip Stop Tape is made to stick on its own components, when applying it therefore needs an overlap of
half the width. The full cure time is approximately 20 – 30 minutes.

Drip Stop can be used even on wet surfaces and pressurized leaking piping up to maximum 3 kg/cm2. It
will even cure under water. When being used in wet areas, it must be winded very tightly. Drip Stop can
also be used as a protection layer to prevent corrosion, or as electric insulation.

Technical Data - Drip Stop T ape Product No. Size: Weight: Qty/Box: IMPA Number:
DS1025 25mm x 10m 0,1kg 20 rolls 812491
Tensile strength: 32,8 kg/cm² DS1038 38mm x 10m 0,2kg 15 rolls 812492
Elongation at brake: 435% DS1050 50mm x 10m 0,3kg 10 rolls 812493
Volume resistivity: 6,1x10,150
Dielectric strength: 21kV/mm
Dielectric constant: 0,03
Dissipation factor: 2.01

General Description - Heat Stop T ape

T-ISS HeatStop is a modified basalt fibre with an aluminium layer for heat-insulation, it is 100%
environmental and health friendly material. Compared to similar asbestos / glass fiber related products in
the market, our HeatStop fibre is environmental friendly material, that is more and more used to replace
glass or ceramic fibres. These claims are backed by test reports. Similar products in shipping industry
contain fibres which can be damaging for your lungs and general health. The HeatStop tape comes with an
modified reinforced aluminium bonding adhesive tape to close the ends of the wrapping. Heat resistance up
to 1000 ºC.

T-ISS HeatStop is type approved by BV. Rules for the Classification of Steel Ships Part C, Chapter 4.
SOLAS 74 Convention, as amended, Regulation 11-2/3,11-2/5, 11-2/6, 11-2/9 & IMO Resolution
MSC.61(67) - FTP Code Annexl, Part 2 & 5, IMO MSC/Circ.1120

Technical Data - Heat Stop T ape

Art. No: THSOOS
IMPA: 81.38.71
Size: 50 mm x 7,8 m
Thickness: 0,3 mm
Weight: 0,9 kg

81

General Description - Cor Stop

CorStop Zinc tape will prevent galvanic corrosion and protects new and existing steel parts such

as bridge supports, pipelines and other marine structures. CorStop is made of a high purity zinc

with an high tack self adhesive backing. CorStop zinc tape is being supplied in 25, 50 and 100

wide rolls each 20 meter long.

Technical Data - Zinc T ape Art.No. Size: Weight: Qty/Box: IMPA Number:
CorStop25 25mm x 20m 1,8kg 48 rolls 67.35.21
CorStop50 50mm x 20m 3,6kg 24 rolls 67.35.22
Material: zinc layer (39%) CorStop100 100mm x 20m 7,2kg 12 rolls 67.35.23
Adhesive: acrylate

Thickness: 0,1mm zinc, 0,05 adhesive

Temp. resistance: up to 115°C

Adhesion to steel: >70N/100mm

Shelf life: 12 months

General Description - Slip Stop

T-ISS SlipStop tape helps to protect slippery surfaces, to prevent accidents. Slip Stop o�erssafe
working and walking by when applied on stairs and walkways, both indoor and outdoor. SlipStop
is a mineral coated plastic film with a pressure sensitive adhesive, protected by a removable
liner.

Technical Data - Slip Stop Art.No. Color: Size: Weight:
AST001 Yellow/Black 50mm x 10m 0,8kg
Back carrier: PVC 0.1mm +/- 0.01mm AST002 Yellow/Black 100mm x 10m 1,6kg
AST003 25mm x 10m 0,4kg
Thickness: 0.8mm +1- 0.2mm (860 grit) AST004 Black 50mm x 10m 0,8kg
AST005 Black 100mm x 10m 1,6kg
Mineral particles: Aluminium Oxide Black

Holding medium: Solvent acrylic adhesive

Adhesion to steel: 1500g/25mrn

Holding power: 8 hours/20mm2/kg

Tensile strength: 6kgs/25mm

Elongation at break: 2596

Coe�ciënt of friction: > 0.5

Application temp.: 5°C up to 50°C

82

General Description - Floor Tape

T-ISS Floor Tape is a special tape designed for marking on floors and walkways to highlight safety hazards.
T-ISS Floor Tape has an extremely durability towards tough surroundings with its excellent adhesive quality.
Marking with the floor tape in dangerous area's, is the first step to increase safety.

Technical Data - Floor Tape Art.No. Size: Weight: Color:
FT001 50mm x 33m 0,3kg Yellow
Material: PVC FT002 50mm x 33m 0,3kg
Adhesive: Natural rubber adhesive FT003 50mm x 33m 0,3kg Red
Carrier: 0.135 mm PVC Film FT004 50mm x 33m 0,3kg Blue
Application temp: 0-50 °C Green
Total thickness: 0.15 mm
Temperature: 0-90 °C
Tensile strength: 25 N/cm
Elongation: 150 %.

General Description - Re ective Tape

T-ISS Reflective Warning tape is an enclosed lens retroreflective material, used to provide safety and
protection. Used to highlight hazards, it is over 200 times more reflective than white paint. Suitable for
highlighting hazards and danger areas. Gives 24 hour protection in and on your vessel.

Technical Data - Re ective Tape

Art.No. Color: Size: Weight: IMPA Number:
REF-001-RW Red/White 50mm x 10m
REF-002-RW Red/White 100mm x 10m 33.11.91
REF-003-YB Yellow/Black 50mm x 10m 33.11.92
REF-004-YB Yellow/Black 100mm x 10m

83

General Discription - RustStop Tape

Product No.: Size: T x W x L (mm) ISSA No. Impa No. Q'ty/Box

TRS05010 1,2 mm x 50 mm x 10 mtr 75 550 01 812471 36 rolls/box
TRS10010 1,2 mm x 100 mm x 10 mtr 75 550 02 812472 18 rolls/box

84 RustStop Tape

85

General Description
Marking pipes on ships and offshore sites is of the utmost importance to ensure safety at all times. Accidents,
injuries and damage to machines and equipment can be caused by the fact your crew, is unaware of the
substances that flow through pipes. The ISO 14726 standard (International Standard Organization),
specifies the principle colours for the identification of substances in pipes. ISO 14726 specifies also
additional colour codes that allow a more detailed identification of the substance.

Base Colors

Installation
Pipes must be marked in the following manner:

● At least one in every room for every pipe and every substance
● At each point where the pipes pass through a wall, a ceiling or floor
● In the proximity of each valve and pump
● Within a distance of 3 to 5 meters. Depending on the length of the pipe (local authorities can demand

additional markers.) Arrows to indicate the directional flow are advisable. Additional Identification by
usage of text will avoid any confusion regarding the substance transported through the piping.

Pipe Marking T ape T ypes

Type 1 Pipe marking tape is a Type 2 Pipe marking tape is a Type 3 Pipe marking tape is a
single colour tape which needs to multi colour tape which can be multi colour tape which can be
be combined to the correct colour supplied with or without flow
supplied with or without flow
coding. Additional, a flow direction and medium. directions and medium. It
direction tape can be added to comes with a high gloss,
laminated finish.
the combination to enhance
identification.

86

87

Pipe Marking Specials
We supply various types of special pipe markers who can fullfill all customer demands on FPSO, Ferries,
Cruiseliners, Tankers and other types of ships. All markers will be made using the colours according to the
ISO 14726 regulation or the customer’s demands.
Non-standard pipe markers can be delivered with an Self-Adhesive layer, or Non-Adhesive.
The non-adhesive pipe markers are called SnapOn Pipe Markers. The SnapOn Pipe Markers have the
advantage that they are very quick to install, an can be removed and refitted on a di�erentpipe. Also, they are
ideal to fit oily or dirty pipes, since their snap-on feature doesn’t require them to stick to the pipe.

88

89

General Description
Turn-key projects
T-ISS offers different engineering services, but can also provide you with a Turn-Key solution. With all of our
expertise we will take care of the entire process as an end-to-end project solution. Many projects have been
successfully executed whereby T-ISS manage the whole process, from identifica-tion and design to full
installation of signs, cabin plans, low location light systems and pipe marking. Based upon your general
arrangement drawings for new build projects, or an on-site surveys for a refurbishment project during dry-
dock.
T-ISS experienced engineers attend your vessel to do a full physical survey. This will identify all essentials to
be in full compliance and requirements for installation and replacement. The result is a gap analysis report,
which identifies gaps within the directional guidance signage of the escape routes, the state of all current
signage, required updates on fire safety plans, measurement results of the LLL system and any other
products that do not adhere to current regulations.
Low Location Light measurement
All Low Location Light systems need to be fully tested, at least once every five years. T-ISS engineers will
test the luminance of your LLL systems on-board with fully certified test equipment. The measurement
process as well as equipment are all certified by DNV. All readings will be reported including and required
upgrades and/or modifications.
Cabin, rescue plan and sign design
Our in-house engineering and design department is experienced in handling all type projects, from cruise to
offshore, from support vessels to FPSO's. T-ISS brings a full engineering service, for engi-neering of Low
Location Light plans, Fire Safety plans and engineering of rescue plans. Our design specialists can design in
your style and according to all applicable regulations.
Examples of our customer specific engineering and design:
• Cabin plans
• Rescue plans
• Multi-Lingual signage
• Non-English signage
• Fire, Safety and Escape plans

90

Custom Plan examples
T-ISS can create and update your vessel's drawings and plans. Specialised technicians use
AutoCad, CorelDraw, IntelliCad or other graphic software to (redesign your cabin plans,
signbooks, fire control maps, lifesaving plans or other related drawings.
In close cooperation with architects, yards, naval designers, ship-owners and classification
societies we are able to produce and/or update all relevant documentation for your vessel.
T-ISS technicians can audit your vessel to give you a full survey on the accuracy of your
documentation. It will give you an insight on the relevancy of all documents and plans, and if
all are still in full compliance with the relevant standards and requirements.
Our service portfolio includes the following:
1: Upgrade fire control and live saving plans
2: Design of sign books
3: Design of new LLL plans
4: Survey & audits on-board your vessel or platform
References; RCCL, Fastnet Line, Tallink, EasyCruises, Finnlines, HAL, DOV Platform,
DFDS, PGS and Statoil.
T-ISS technicians are available for services globally, work independent and are available
24/7 in order to give you the highest possible service. T-ISS designs, creates and develops
projects based on your specific requirements in a cost-e�cient way.

91

Custom Plans

From survey to finished project
A survey will form the base of mapping the current situation, together with your team the desired
situation will be mapped. The surveyed data and desired situation is translated into a plan for signage,
low location light and pipe marking. This plan, will form the base of the project and will be used to
produce the evacuation and safety plans.

All plans are drafted in in accordance with current laws and legislations, describing practical solutions
that will fit the situation on-board your vessel. The plan will also advice on the application of pipe marking
according to the ISO standard and the use of Solas mandatory Anti Splash tapes in the engine room.

T-ISS technicians have extensive experience in various sectors and apply 'best practices' based upon
many years of experience. For complete signage project we support yards or owners, a T-ISS supervisor
will instruct and guide your crew on the work procedures and how to install signs, low location light, cabin
plans and tapes, by experience we found this is the preferred and most economical solution by many of
our customers.

Implementation and Maintenance
From a sign plan, the full realization of the sign project can be arranged by T-ISS using our Total Project
Service method.

After implementation the sign plan serves as your reference ESCAPE PLAN C DECK
and as a base for future maintenance of all signage and low
location light. We manufacture sign plans for locations MS “POLAR KING”
worldwide including offshore installations, ships, FPSO's,
cruise and ferry. MS POLAR KING BRIDGE DECK
D-DECK
Realization of a sign plan consists of: ST-254L CD
- Provision of architectural drawings C-DECK
- Survey on location FW
- Existing and/or required signage updates B-DECK
- Structural situation
- Processing of survey data into sign plan drawings A-DECK
- Presentation and evaluation of the sign plan
MAIN DECK
T-ISS is able to implement the sign plan:
- Production of standard and bespoke safety signage TWEEN DECK
- Installation by our own experienced teams
- Related draft works as part of the scope WF
- Project-engineering for a safe and optimal end result 9
- Periodical maintenance
MS POLAR KING PS

H

SB

FE F W
9

YOU ARE HERE FIRE EQUIPMENT
SYMBOLS
W Fire hose
ESCAPE ROUTES / RESCUE EQUIPMENT
FL Fire locker
You are here Main escape route Emergency escape route FE Fireman’s Manual call point P Fire extinguisher
12 Powder 12 kg
equipment
Stairs Muster station SB Starboard F Fire extinguisher P Fire extinguisher
Emergency escape PS Port side 1 Number 9 Foam 9 ltr 25 Powder 25 kg
breathing device 2 Number
(EEBD) 2 W Fire extinguisher
Lifeboat Life buoy w/ light 9 Water 9 ltr
Put the belt
behind your CO2 Fire extinguisher
20 Co2 kg
back and
LIFE JACKETS INSTRUCTIONS 1 tighten 3 4
Life jacket the
Child’s life jacket Pull the jacket buckle Ready When
down over well jumping
your head from height,

press
the jacket
down, as
illustrated

here

92

93