WATERPROOFING (Technical Data Sheet)

DIGITAL BOOK

TECHNICAL DATA SHEET

WATERPROOFING

JT Construction Chemicals

Website : id-jtcc.com
Telp : (021) 82740458
Email : [email protected]

Technical Data Sheet

WATERPROOFING

Table Contents

Table Contents.............................................................................................................................................. 2
Waterproofing .............................................................................................................................................. 3

▪ UA-1001 ................................................................................................................................................. 4
▪ EPL-550 .................................................................................................................................................. 6
▪ Neothane Primer ................................................................................................................................... 8
▪ Neothane #200 ...................................................................................................................................... 9
▪ Neothane #500 ...................................................................................................................................... 10
▪ Neothane #500 MA ............................................................................................................................... 11
▪ JTCoat PU TC Clear................................................................................................................................. 12
▪ Neoseal Guard ....................................................................................................................................... 13
▪ JTAS One Coat........................................................................................................................................ 14
▪ As Bond .................................................................................................................................................. 15
▪ JTProof HDPE ......................................................................................................................................... 16
▪ JTTorch Seal Aggregate.......................................................................................................................... 17
▪ JTTorch Seal Sanded .............................................................................................................................. 19
▪ Neosheet AL........................................................................................................................................... 21
▪ SS-BAS .................................................................................................................................................... 22
▪ Neoseal .................................................................................................................................................. 24
▪ Hyperseal DB Series............................................................................................................................... 25
▪ Hyperseal DP Series ............................................................................................................................... 26
▪ Neoseal Flex........................................................................................................................................... 27
▪ Neoseal Grey.......................................................................................................................................... 28

Waterproofing | 2

Technical Data Sheet

WATERPROOFING

Vast selection of solution that can provide a waterproof systems
in the construction and/or building.
Polyurea
Polyurethane
Membrane-sheet
Water Repellant
Waterstop
Cementitious

Waterproofing | 3

Technical Data Sheet

UA-1001 Pure Polyurea Coating

DESCRIPTION UA-1001 is a two-component pure Polyurea elastomer system with high

performance. This system is based on amine-terminated polyether resins, amine
chain extenders and pre-polymers. It provides an extremely flexible, tough,
resilient monolithic membrane with good water resistance and chemical
resistance.

PROPERTIES

TYPICAL PROPERTIES Viscosity cPs, 25oC Specific gravity,
400 – 800 25oC
Part 400 – 800
A 1.116 ± 0.02
B 1.016 ± 0.02

PHYSICAL PROPERTIES

Item Specification Data

Hardness 95 ± 5 95
(Shore A) 25 ± 5 25
Tensile Strength 80 ± 20 79
450 ± 100 440
(MPa)
Tear Strength

(MPa)
Elongation

(%)
DRYING TIME

TFT <15 second

Full service use > 72 hours at 20°C

Physical properties should be gain at 2 weeks aged

PROCESS CONDITION Dispense pressure > 2,000 psi (Dynamic)

Differential Pressure < 300 psi (A and B Dynamic)

Spray Width 40 - 80°

Main heater Temperature 65°C (±10°C)

Hose heater Temperature 65°C (±10°C)

Component Temperature 35 – 55°C

Mixing ratio (V/V) 1:1

Theoretical coverage ratio 1.1 Kg/m2

Recommended Coating Thickness 2 – 3 mm

One Layer Thickness 300 – 800 microns

Spray gun Swing Range <120 cm

Recoat time <24hours (20°C)

If over the recoat time, use thin coat of the primer before spraying main coat.

Top Coat
To prevent peeling of the top coat in the water park application, top coat shouldbe
spread within 1day after main coat is sprayed. If over the time, use thin coat of the
primer before spread the Top coat.

Waterproofing | 4

Technical Data Sheet Component A : 210 Kg
PACKAGING Component B : 200 Kg

Waterproofing | 5

Technical Data Sheet

EPL-550 Polyurethane – Polyurea Hybrid Coating for Heavy-duty Waterproofing Systems

DESCRIPTION EPL-550 is a two-component hybrid Polyurea elastomer system with high
PROPERTIES
performance. This system is based on polyether resins, amine chain extenders and
pre-polymers. It provides an extremely flexible, tough, resilient monolithic
membrane with good water resistance.

TYPICAL PROPERTIES Viscosity cPs, 25oC Specific gravity,
400-800 25oC
Part 400-800
A 1.134 ± 0.02
B
1.018 ± 0.02
PHYSICAL PROPERTIES

Item Specification Data

Hardness 83 ± 5 83
(Shore A) 17 ± 5 17
60 ± 20 60
Tensile Strength 550 ± 100 550
(MPa)

Tear Strength
(MPa)

Elongation
(%)

DRYING TIME

TFT <15 second

Full service use > 72 hours at 20°C

Physical properties should be gain at 2 weeks aged

PROCESS CONDITION Dispense pressure > 2,000 psi (Dynamic)

Differential Pressure < 300 psi (A and B Dynamic)

Spray Width 40 - 80°

Main heater Temperature 65°C (±10°C)

Hose heater Temperature 65°C (±10°C)

Component Temperature 35 – 55°C

Mixing ratio (V/V) 1:1

Theoretical coverage ratio 1.1 Kg/m2

Recommended Coating Thickness 2 – 3 mm

One Layer Thickness 300 – 800 microns

Spray gun Swing Range <120 cm

Recoat time <24hours (20°C)

If over the recoat time, use thin coat of the primer before spraying main coat.

Waterproofing | 6

Technical Data Sheet Component A : 210 Kg
PACKAGING Component B : 200 Kg

Waterproofing | 7

Technical Data Sheet

Neothane Primer One Component Primer for Neo-Easythane & Neothane #200

DESCRIPTION Neothane Primer is a one component polyurethane moisture curing primer with

excellent penetration into concrete slab or mortar surface. No mixing andaddition
with another additives and/or hardener.

PROPERTIES Neothane Primer (1 component Polyurethane primer)

Form Single Part Liquid
Color
Density, g/mL Transparent
Viscosity, cPs 0.96 ± 0.1
Mixing Ratio
Pot Life at 25°C 1,000 ± 100
Drying Time at 25°C 1 component
Time at 25°C
Within 4 hours
Dosage Within 24 hours Tacky-free
Dry Film Thickness Within 60 minutes
Number of Coating 0.3 Kg/m2
200 microns
1 – 3 depends on surface
profile

PACKAGING 14 Kg per Pail.
0.3 Kg/m2 consumption for about 200 micron of thickness

Waterproofing | 8

Technical Data Sheet

Neothane #200 Two-Component Pure Polyurethane Liquid Membrane

DESCRIPTION Neothane #200 is a two-component modified polyurethane (polyol/poly-
isocyanate modified-chain) that is mainly used for Waterproofing and medium-

duty Flooring. Good chemical and abrasion resistant.
It must be noted that Neothane #200 is part of the Polyurethane Waterproofing
Systems Application as the Body Coat layer, and it needs other products (Primer
and/or Topcoat layers) to achieve the full Polyurethane Waterproofing Systems.

PROPERTIES Form Viscous colored liquid (A)
PACKAGING Yellowish transparent liquid (B)
Color Green, Grey
Density, g/mL 1.40 ± 0.1 (mixed)
Viscosity, cPs 2500 ± 500 (mixed)
Mixing Ratio 4:1
Pot Life at 25°C Within 30 minutes
Drying Time at 25°C Within 24 hours
Elongation More than 450%
Tensile Strength More than 2.5 MPa
Tear Strength More than 15 MPa
Hardness (Shore A)
60 ± 5

20 Kg per set consists of:
• 16 Kg per Pail of Part A
• 4 Kg per Pail of Part B

1.10 – 1.20 Kg/m2 per mm thickness consumption.

Waterproofing | 9

Technical Data Sheet

Neothane #500 Two-Component Polyurethane-based UV Resistant Topcoat

DESCRIPTION Neothane #500 is a two-component modified aliphatic polyurethane with
PROPERTIES
excellent adhesion and a great UV-resistant effect.

It must be noted that Neothane #500 is part of the Polyurethane Waterproofing

Systems Application as the Topcoat layer, and it needs other products (Primer

and/or Body Coat layers) to achieve the full Polyurethane Coating Systems

Form Colored liquid (A)

Yellowish transparent liquid (B)

Color Green, Grey

Density, g/mL 1.10 ± 0.1 (mixed)

Viscosity, cPs 1200 ± 100 (mixed)

Mixing Ratio 3:1

Pot Life at 25°C Within 3 hours

Drying Time at 25°C Within 24 hours

Tacky free Time at 25°C Within 30 minutes

Dosage 0.25 Kg/m2

Dry Film Thickness 150 microns theoretically

Number of Coating 1 – 3 times

PACKAGING 16 Kg per set consists of:
• 12 Kg per Pail of Part A
• 4 Kg per Pail of Part B
0.25 Kg/m2 consumption per coat.

Waterproofing | 10

Technical Data Sheet

Neothane #500 MA Two-Component Polyurethane-based Topcoat

DESCRIPTION Neothane #500 MA is a two-component modified aliphatic polyurethane with
PROPERTIES
excellent adhesion and a great UV-resistant effect.

It must be noted that Neothane #500 MA is part of the Polyurethane

Waterproofing or Flooring Systems Application as the Topcoat layer, and it needs

other products (Primer and/or Body Coat layers) to achieve the full Polyurethane

Coating Systems.

Form Colored liquid (A)
Yellowish transparent liquid (B)

Color Green, Grey, customized color

Density, g/mL 1.12 ± 0.05 (mixed)

Mixing Ratio 4:1

Pot Life at 25°C Within 30 minutes

Tacky free Time at 25°C Within 4 hours

Drying Time at 25°C Within 12 hours

Dosage 0.20 – 0.30 Kg/m2

Dry Film Thickness 200 microns theoretically

PACKAGING 20 Kg per set consists of:
• 16 Kg per Pail of Part A
• 4 Kg per Pail of Part B

Waterproofing | 11

Technical Data Sheet

JTCoat PU TC Clear Two Component Pure Polyurethane Clear Finish

DESCRIPTION JTCoat PU TC Clear is a two component Pure polyurethane (polyol/poly-
isocyanate modified-chain) that mainly use as protective coating and
waterproofing. Good chemical and abrasion resistant.

PROPERTIES Form Viscous liquid (A)
Transparent liquid (B)
Color Clear
Density, g/mL 1.10 ± 0.1 (mixed)
Viscosity, cPs 2,100 ± 500 (mixed)
Mixing Ratio 4:1
Pot Life at 25°C Within 30 minutes
Drying Time at 25°C Within 4-12 hours
Tensile Strength More than 2.5 MPa
Tear Strength More than 15 MPa
Application thickness 40 – 60 microns per coat

PACKAGING 20 Kg (16 kg base and 4 kg hardener) and 5 kg packaging (4 kg base and 1 kg

hardener)
0,1 kg/m2 for 40 – 60 microns theoretically

Waterproofing | 12

Technical Data Sheet

Neoseal Guard One Component UV Resistant Modified Acrylic-Polyurethane Waterproofing

DESCRIPTION Neoseal Guard is a one component moisture-cured UV Resistant Modified
Acrylic-Polyurethane with excellent Waterproofing property.

PROPERTIES

PACKAGING 18 Kg per Pail.
0.5 – 1.0 Kg/m2 consumption.

Waterproofing | 13

Technical Data Sheet

JTAS One Coat One Component Rubberized Asphalt Emulsion

DESCRIPTION JTAS One Coat is one component rubberized-asphalt with excellent
PROPERTIES Waterproofing property. No mixing and addition with another additives and/or
hardene

Form Single part viscous liquid
Color Black
Density, g/mL 1.60 ± 0.1
Mixing Ratio Single Component

Pot Life 5°C : 60 minutes
20°C: 30 minutes
Dry-through 30°C: 20 minutes
5°C : 72 Hours
Overcoat 20°C: 24 Hours
30°C: 18 Hours
Elongation 5°C: 3 - 4 days
Tensile Strength 20°C: 1 – 2 days
Tear Strength 30°C: 18 - 36 hours
>550%
More than 2.0 MPa
More than 12 MPa

PACKAGING 18 L per pail
1.35 - 1.50 Kg/m2 per mm thickness for normal consumption
0.50 – 0.75 kg/m2 consumption for toilet, bathroom and balcony

Waterproofing | 14

Technical Data Sheet

ASBond Flexible Bitumen – Rubber Membrane

DESCRIPTION ASBond is one component rubberized bitumen emulsion sealing membrane. It
is easy to apply, free of solvents and plasticizer compound. ASBond is an elastic
watertight membrane.

PROPERTIES Tensile elongation, >600%
ASTM D412
<1.0%
Water absorption, BS1881,
part 122 <100oC no sagging
Heat resistance >20oC
Cold resistance >120oC
Softening point (R+B) Pasty, thycsotrophic
Form Brown-black (before drying)
Color Non-ionic
Emulsion 1.08kg/L
Specific gravity 11
pH value 60%
Solid content Not below freezing point
Storage temperature Min +5oC
Application temperature 4 – 6 hours
Drying time (20oC+60%RH) <4 days

Fully dried (1.3mm thick)

PACKAGING ASBond
• 200 kg drum
• 20 kg pail

Waterproofing | 15

Technical Data Sheet

JTProof HDPE Pre-applied HDPE pressure

DESCRIPTION JTProof HDPE is a Pre-applied HDPE pressure sensitive adhesive waterproofing

membrane which bonds integrally to poured concrete, remaining in place if
settlement of substrate occurs.
JTProof HDPE provides water, water vapor protection to water excludingstructures
and protects concrete from aggressive ground salts, chemicalsand hydrocarbons.
JTProof HDPE is supplied with a self-adhesive selvedge along one side of the roll to
provide sealed laps and a comprehensive range of auxiliary products to simplify the
application process.

PROPERTIES Properties Typical Values
Thickness 1.2 – 1.5 mm
Tensile Strength 27 MPa
Elongation 250 – 300%
Puncture Resistance 1 ± 0.05 MPa
Adhesion to Concrete 1.5 ± 0.05 MPa
Resistance to Hydrostatic Head >70 m
Overlap Joint Strength 12.5 - 13.5 N/mm

PACKAGING JTProof HDPE: 20 x 2.0 m, thickness 1.5 mm

Waterproofing | 16

Technical Data Sheet

JTTorchSeal Aggregate High Performance Elastomeric Torch - Applied Waterproofing Sheet

DESCRIPTION JTTorchSeal Aggregate is a high performance APP Modified bituminous torch
PROPERTIES
applied waterproofing membrane; it is reinforced with spun banded fiber not proof

polyester.

The underside of JTTorchSeal Aggregate is finished with a light polyethylene foil.

This increases flame - touching efficiency, reduces gas consumption and also

protects the rolls during (transport, handling and storage).

JTTorchSeal Aggregate are composed of bitumen that is modified by APP, a

polypropylene polymer. The mixing has ensures that a true matrix inversion taken

place, where the APP forms a continuous skeleton network with the bitumen filling

up the void. This result in much better cold flexes temperatures and aging

resistance.

Membrane thickness 3mm
- 3A 4mm
- 4A

Reinforcement based 180gms/m2

- Polyester mat

Softening Point 150oC

ASTM D36

Tear Resistance

- Longitudinal 180N

- Transversal 180N

Elongation

- Longitudinal 50%

- Transversal 60%

Tensile strength

- Longitudinal 820N/5cm

- Transversal 600N/5cm

Water Absorption, < 0.15%

BS 1881 Part 12 2:1983

Impermeability of Impermeable.

membrane to water.

UNI 8202

Resistance to Thermal No sign of deterioration
Ageing, UNI 8202 No sign of deterioration

Resistance to Ageing due L4
to UV, ASTM G53 I4

Puncture resistance
- Static
- Dynamic

Waterproofing | 17

Technical Data Sheet JTTorchSeal Aggregate = 1m x 10m roll
PACKAGING JTSealastic = 200 L drum, 20 L pail

JTTorchSeal Aggregate are come in two types of finishing
-Sand Finished (Non-expose system)
-Plated Finished (Expose system)

Note: Aluminum faced range and double reinforced torch membranes are
available upon request.

Waterproofing | 18

Technical Data Sheet

JTTorchSeal Sanded High Performance Elastomeric Torch - Applied Waterproofing Sheet

DESCRIPTION JTTorchSeal Sanded is a high performance APP Modified bituminous torch
PROPERTIES
applied waterproofing membrane; it is reinforced with spun banded fiber not

proof polyester.

The underside of JTTorchSeal Sanded is finished with a light polyethylene foil. This

increases flame - touching efficiency, reduces gas consumption and also protects

the rolls during (transport, handling and storage).

JTTorchSeal Sanded are composed of bitumen that is modified by APP, a

polypropylene polymer. The mixing has ensures that a true matrix inversion taken

place, where the APP forms a continuous skeleton network with the bitumen filling

up the void. This result in much better cold flexes temperatures and aging

resistance.

Membrane thickness 3mm
- 3A 4mm
- 4A

Reinforcement based 180gms/m2

- Polyester mat

Softening Point 150oC

ASTM D36

Tear Resistance

- Longitudinal 180N

- Transversal 180N

Elongation

- Longitudinal 50%

- Transversal 60%

Tensile strength

- Longitudinal 820N/5cm

- Transversal 600N/5cm

Water Absorption, < 0.15%

BS 1881 Part 12 2:1983

Impermeability of Impermeable.

membrane to water.

UNI 8202

Resistance to Thermal No sign of deterioration
Ageing, UNI 8202 No sign of deterioration

Resistance to Ageing due L4
to UV, ASTM G53 I4

Puncture resistance
- Static
- Dynamic

Waterproofing | 19

Technical Data Sheet JTTorchSeal Sanded = 1m x 10m roll
PACKAGING JTSealastic = 200 L drum, 20 L pail

JTTorchSeal Sanded are come in two types of finishing
-Sand Finished (Non-expose system)
-Plated Finished (Expose system)

Note: Aluminum faced range and double reinforced torch membranes are
available upon request.

Waterproofing | 20

Technical Data Sheet

Neosheet AL Bitumen-Aluminum Complexed Sheet Membrane for Non-Exposed Waterproofing

DESCRIPTION Neosheet AL is A product that combined modified bitumen asphalt and
functional protector to protect UV on the top of a self-adhesive used to create a
waterproof and UV- resistance and heat-resistance layer.

PROPERTIES

PACKAGING 1 Rolls
Length: 10 m
Width: 1 m
Thickness: 1.2 mm

Waterproofing | 21

Technical Data Sheet

SS-BAS Self-adhesive complex sheet membrane for exposed

DESCRIPTION A butyl-based self-adhesive product having exposed layer that consist of

aluminum foil woven, High-Density Poly Ethylene (HDPE) and aramid. This product
used to water proofing at rooftop, slab, metallic roof repairing etc. SS-BAS has
water proofing, sound proofing, thermal shock proofing properties, and also low
thermal conductivity .

PROPERTIES Test Item Unit Standard Test Result
Tensile Strength 3.0 or 22.8 Passed
Length N/mm2 over 20.3 Passed
Strain Width N/mm2 3.0 or 977 Passed
Length over 954 Passed
Width % 57.4
% N 25 or over 52.9
Tearing strength test Length N 21.5
Width N/mm2 2.0 or over 19.4
Tensile Length N/mm2 369
Width %
Strength Length
%
Strain Width
N/mm2
60oC between Length N/mm2
overlapping Width
Length % 150 or over
parts in case 322
Width %
of
-
Temperature fracture
-
dependence Tensile N/mm 2.0 or over 27.2
150 or over 24.6
Strength - 252

Strain - 239

- between -
20oC overlapping

parts in case

of

fracture

Bend resistance test No fine No
crack and no abnormality
Adhesive Hydrostatic pressure test separation of was found
stability test Peeling resistance test protective
film test at No
Dent test 20oC penetration

20oC No of water
penetration 1.6
Fatigue test
Over 1.5 No
-20oC No penetration

penetration No
after leaving abnormality
was found
for
48 hours Abnormality
No crack was found
and
fracture at
20oC – (-
20oC
No
separation
from
bottom
surface
(1000
times)

Waterproofing | 22

Technical Data Sheet Sheet membrane :Thickness 1.2 mm
PACKAGING Connecting tape : Width 1 m, Length 15 m (R/L)
: Width 50 mm
: Length 50 m (R/L)

Waterproofing | 23

Technical Data Sheet

Neoseal Clear, water-based alkylalkoxysilane penetrating sealer.

DESCRIPTION Neoseal is a clear, water-based 10% alkylalkoxysilane penetrating sealer. It
PROPERTIES protects against moisture and chloride intrusion.

Form Milky White Liquid
Solid Content % w/w 10
Specific Gravity
Average Penetration 0.98 ± 0.05
3 – 5 mm, depends on Surface
Viscosity porosity
Toxicity 200 ± 20 CPs
Non-Toxic

PACKAGING 18 Kg Pail
0.3 – 0.5 Kg/m2 per mm thickness consumption.

Waterproofing | 24

Technical Data Sheet

Hyperseal DB Series Swell-able Water stop

DESCRIPTION Hyper Stop DB Series is high performance hydrophilic bentonite water stop.
Hyper Stop DB Series produced using high performance modified bentonite strips.
The swelling action result of Hyper Stop DB Series creates a positive seal against
the face of the concrete joint and prevents the water entry into the structure
though protected joint.

PROPERTIES Color Black

Specific Gravity 1.35 ± 0.05

Shore A Hardness > 16

Tensile Strength > 0.5 MPa

Expansion Rate > 300 %

Heat Resistant Test

- Variation Rate of ± 5%

Length No Change

- Physical Deformity

Cold Resistant Test

- Variation Rate of ± 5%

Length No Change

- Physical Deformity

Service Temperature -25 – 80°C

Application temperature -5 – 50°C

Siz

e
DB-2015, DB-2015 (N) 20 x 15 mm

DB-2515, DB-2515 (N) 25 x 15 mm

DB-2519, DB-2519 (N) 25 x 19 mm

DB-2520, DB-2520 (N) 25 x 20 mm

(N) option: Pre-Installed Center Fiber Net Insertion

PACKAGING DB-2015, DB-2015(N) 20 x 15mm (6m x 7 roll/box)
DB-2515, DB-2515(N) 25 x 15mm (6m x 6 roll/box)
DB-2519, DB-2519(N) 25 x 19mm (5m x 6 roll/box)
DB-2520, DB-2520(N) 25 x 20mm (5m x 6 roll/box)

Waterproofing | 25

Technical Data Sheet

Hyperseal DP Series Swell-able Water stop

DESCRIPTION Hyperseal DP Series is high performance hydrophilic Rubber water stop.
PROPERTIES Hyperseal DP Series produced using high performance modified rubber strips.
The swelling action result of Hyperseal DP Series creates a positive seal against
the face of the concrete joint and prevents the water entry into the structure
though protected joint.

Color Black

Specific Gravity 1.35 ± 0.05

Shore A Hardness 40 – 50

Tensile Strength 20 MPa

Expansion Rate > 300 %

Heat Resistant Test
- Variation Rate of Length ± 5%
- Physical Deformity No Change

Cold Resistant Test
- Variation Rate of Length ± 5%
- Physical Deformity No Change

Service Temperature -30 – 50°C

Application temperature -5 – 50°C

Siz 20 x 3 mm

e
DP-2003

DP-2004 20 x 4 mm

DP-2005 20 x 5 mm

DP-2010 20 x 10 mm

PACKAGING DP-2003 20 x 3mm (30m x 10 roll/box)

DP-2004 20 x 4mm (25m x 10 roll/box)
DP- 2005 20 x 5mm (20m x 10 roll/box)
DP- 2010 20 x 10 mm (10 m x 10 roll/box)

Waterproofing | 26

Technical Data Sheet

Neoseal Flex Two Component Flexible Cementitious Waterproofing

DESCRIPTION Neoseal Flex is two parts on mixing yield brush able, smooth slurry with
PROPERTIES excellent bond to most substrates. The product is based on selected synthetic
resins and cements.
PACKAGING
Form Part A: Milky White Liquid
Part B: Cementitious Powder
Elongation 140%
Mixing Ratio Part A 1:2 Part B
Pull-off Strength 3.20 N/mm2
Viscosity 100 ± 20 CPs
Solid Content 48 – 50 %
Toxicity Non-Toxic
Pot life (25°C) 30 minutes
Initial: 2 – 3 Hours (Tack-
Setting Time (25°C) free)
Final: 16 - 24 Hours

30 Kg per sets consist of:
• 10 Kg per Pail of Part A

• 20 Kg per Bag of Part B
1.2 – 1.5 Kg/m2 per mm thickness consumption.

Waterproofing | 27

Technical Data Sheet

Neoseal Grey Polymer Modified Cementitious Waterproofing Slurry & Protective

DESCRIPTION Neoseal Grey is a cement based two component polymer modified flexible
PROPERTIES waterproof coating. When used in reservoir or similar structure, it is able to accommodate
the bending moment of the structure when it is filled with water.It fills and seals pores and
voids of concrete or Masonry Surfaces to prevent water in infiltration.
It is compatible to concrete. The bonding agent imparts excellent adhesion to concrete
surfaces and forms part of the structure.
It is also supply in white color, by the name of Neoseal White, where the properties remain
unchanged.

PACKAGING Neoseal Grey = 20 kg/pack
Liquid = 5 kg ; Powder = 15 kg (Mixing Ratio = 1:3)Coverage =
11m2/per pack per two coats

Waterproofing | 28