Full_book

MULTIPLIERS Lightweight: High- Construction DVV-13Z
performance aluminium
DREMOPLUS ALU Family 3: DVV-13Z housing is 30% lighter
than a steel one.
1/2” input square.
Flexible: With detachable
Low backlash, single- Z-form reaction arm. Can
stage planet gear for a be optionally retrofitted
long service life. with long reaction arm
incorporating an adjustable
3/4” output square with reaction square (L-form) of
drill hole for impact lightweight metal.
sockets with safety pin
and ring. Forged reaction arm
absorbs any counter
force.

100% quality check. Easy to operate: The
Safe. most common INPUT/
Delivery includes factory OUTPUT torques on the
test certificate. torque multiplier.

DVV-13Z 10

TORQUE MULTIPLIER
Use:

Industry, construction sites, industrial vehicles and automobile garages.
Bridge building, ship building, aircraft construction, railway construction,
refineries.
Features:
Mechanical, hand torque multiplier for controlled
nut and bolt tightening and undoing screw
connections.
With a single-stage precision planet gear.
High-performance aluminium housing.
With overload protection for protecting
the gearbox.
With mode dependent reaction device.
Guaranteed accuracy:
Better than +/- 3% tolerance.
For operation in combination
with a torque wrench.
Output square drive with
a drill hole – for sockets or
impact sockets with a
safety pin and ring.

Code No. Max. Max. C DA B C C D D Max. Max. Excl VAT
DVV-13Z Nm lbf.ft Ratios Nm lbf.ft
2653370 No. Output Output min max min max
Optional RL-DVV13 Input Input
accessories
2653400 1 1300 950 1 : 5 80 133 56 95 165 173 270 200 1900 31,986.00

Description Excl VAT

Reaction Arm-L 700 19,631.00

149

MULTIPLIERS

DREMOPLUS ALU Family 2: DVI-20L/Z and DVI-28L/Z 100% quality check. Safe.
Delivery includes factory test
3/4” input square. certificate.

Lightweight:
High-performance
aluminium housing is 30%
lighter than a steel one.

Low backlash, A Z-form forged reaction arm
single-stage planet of CHROME VANADIUM steel
gear for a long absorbs any counter force
service life. that arises.

Output square 3/4” Overload safety
and 1” with drill hole mechanism achieved
for impact sockets from a classic shearing
with safety pin and square.
ring.
DVI-20L and DVI-28L
10
Reaction arm L-form with adjustable
DVI-20Z and DVI-28Z reaction square drive fix integrated.

Reaction arm Z-form offset fix integrated. Construction DVI-L

Construction DVI-Z

150

MULTIPLIERS DVI-28Z

DVI-20L / Z + DVI 28L / Z

TORQUE MULTIPLIER
Use:

Industry, construction sites, industrial vehicles and automobile garages.
Bridge building, ship building, aircraft construction, railway construction, refineries.
Features:
Mechanical, hand torque multiplier for controlled nut and bolt tightening
and undoing screw connections.
With a single-stage precision planet gear.
High-performance aluminium housing.
With overload protection for protecting the gearbox.
With mode dependent reaction device.
Guaranteed accuracy: Better than +/-3% tolerance.
For operation in combination with a torque wrench.
Output square drive with a drill hole – for sockets or
impact sockets with a safety pin and ring.

DVI-28L

10

Code No. Max. Max. C DA B C C Max. Max. Excl VAT
Nm lbf.ft Ratios Nm lbf.ft
2653249 DVI-20L Output Output min max
2653257 DVI-28L 1 2000 1500 1 : 4 Input Input
2653265 DVI-20Z
2653273 DVI-28Z 1 2800 2050 1 : 5,5 88 131 78 106 580 430 2500 47,012.00
3400 52,016.00
Optional No. 1 2000 1500 1 : 4 106 146 93 199 550 410 2900 35,675.00
accessories 3900 41,697.00
RL-DVI20 1 2800 2050 1 : 5,5 88 131 102 150 580 430
2653303 RL-DVI28
2653338 106 146 100 150 550 410

Description Excl VAT

Reaction Arm-L 1200 15,550.00
Reaction Arm-L 1700 15,558.00

151

MULTIPLIERS

DREMOPLUS ALU Family 1: DVV-40Z, DVV-40ZRS - DVV-540RS

1/2” or 3/4” input 100% quality check. Safe.
square. Delivery includes factory test
certificate.
Convenient:
Overload safety Integrated ‘RS’
mechanism: Non- anti-windup ratchet
destructive overload for safe working.
safety mechanism – Bi-directional.
‘Slipper’ – filed as a
patent. Lightweight and slim:
Triggers overload at High-performance
10% and clicks back into aluminium housing
place. Clockwise and is 30% lighter than a
anti-clockwise. steel one.

Flexible: With detachable A Z-form forged
Z-form reaction arm. reaction arm of CHROME
Can be optionally VANADIUM steel absorbs
retrofitted with L-form any counter force that
reaction arm and arises. Optional L-form
adjustable reaction reaction arm on request.
square.

10 A 1”, 1.1/2” or 2.1/2” output
square with drill hole for impact
sockets with safety pin and ring. Easy to operate: The most common
INPUT/OUTPUT torques on the
Advantages torque multiplier.
DVV-40Z, DVV-40ZRS - DVV-540RS
Construction
Low backlash, two- DVV-40ZRS - DVV-540RS
stage planet gear for a
long service life. A coating of
the tooth flanks
Stable, shuttle impacted consisting of
gear housing. ceramic and
Teflon® ena-
bles the gear to
be constantly
lubricated
with minimum
grease.

152

MULTIPLIERS

DVV-40Z + DVV-40ZRS

TORQUE MULTIPLIER
Use:

Industry, construction sites, industrial vehicles and automobile garages.
Bridge building, ship building, aircraft construction, railway construction, refineries.
Features:
Mechanical, hand torque multiplier for controlled nut and bolt tightening
and undoing screw connections.
With a two-stage precision planet gear.
High-performance aluminium housing.
DVV-40ZRS model with anti-windup ratchet (RS).
With non-destructive ‘Slipper’ overload safety mechanism.
Guaranteed accuracy: Better than +/-3% tolerance.
For operation in combination with a torque wrench.
Output square drive with a drill hole – for sockets or impact sockets
with a safety pin and ring.

Code No. Max. Max. C DA B C C D D Max. Max. Excl VAT
DVV-40Z Nm lbf.ft Ratios Nm lbf.ft
2653087 DVV-40ZRS Output Output min max min max
2653109 Input Input
No.
Optional RL-DVV40 1 4000 2930 1 : 16 1088 212 68 133 250 256 300 220 5400 58,307.00
accessories 1 4000 2930 1 : 16
2653184 88 227 68 133 264 270 310 230 5900 68,272.00
Description Excl VAT

Reaction Arm-L 1700 25,468.00

153

DVV-60ZRS – DVV-130ZRS MULTIPLIERS

TORQUE MULTIPLIER DVV-130ZRS
Use: DVV-100ZRS

Industry, construction sites, industrial vehicles and automobile garages.
Bridge building, ship building, aircraft construction, railway construction, refineries.
Features:
Mechanical, hand torque multiplier for controlled nut and bolt tightening
and undoing screw connections.

With a single-stage precision planet gear.

High-performance aluminium housing.

With overload protection for protecting the gearbox.

With mode dependent reaction device.

Guaranteed accuracy: Better than +/-3% tolerance.

For operation in combination with a torque wrench.

Output square drive with a drill hole – for sockets or
impact sockets with a safety pin and ring.

DVV-60ZRS DVV-80ZRS

Code No. Max. Max. C DA B C C D D Max. Max. Excl VAT
Nm lbf.ft Ratios Nm lbf.ft
DVV-60ZRS Output Output min max min max
DVV-80ZRS Input Input
DVV-100ZRS 1 6000 4400 1 : 18
2653117 DVV-130ZRS 102 257 110 190 316 324 400 300 10400 95,463.00
2653125 1 8000 5870 1 : 22
10 2653133 No. 128 277 110 190 338 342 420 310 13300 179,623.00
2653141 1 10000 7330 1 : 28,5
RL-DVV60-80 138 292 120 207 350 356 410 305 13700 153,102.00
Optional 1 13000 9530 1 : 39
accessories 175 306 (124) (214) (372) (379) 380 280 20700 190,917.00

2654091 Description 4000 Excl VAT
Reaction Arm-L 37,286.00

DVV-540RS

TORQUE MULTIPLIER
Use:

Industry, construction sites, industrial vehicles and automobile garages.
Bridge building, ship building, aircraft construction, railway construction, refineries.
Features:
Mechanical, hand torque multiplier for controlled nut and bolt tightening
and undoing screw connections.

With a single-stage precision planet gear.

High-performance aluminium housing.

With overload protection for protecting the gearbox.

With mode dependent reaction device.

Guaranteed accuracy: Better than +/-3% tolerance.

For operation in combination with a torque wrench.

Output square drive with a drill hole - for sockets or
impact sockets with a safety pin and ring.

Code No. Max. Max. C DA Max. Max. Excl VAT
2653168 DVV-540RS Nm lbf.ft Ratios B Nm lbf.ft 462,002.00
Output Output
154 Input Input

1 54000 40330 1 : 175 270 415 380 280 64.4

10

155

TOOLS FOR LIFE | SECTION 11

156

PULLERS

Universal Pullers
Puller Safety Cover
Nut Splitters
Stud Extractors
Special Tools
Puller Kits

| YOUR PATH TO THE RIGHT PULLER

1. How can the component being extracted be gripped?
2. Is a support possible either externally or internally?
3. Which clamping spread/reach has to be obtained?

External pulling

 The component to be extracted can  The component

only be gripped externally. to be extracted is
 The centre axle is for support purposes.
mounted flush, thereby ruling out the use
of extraction legs.
 The centre axle is for support purposes.

11 Internal pulling
 The component to be extracted can only be gripped internally.
 Centre axle support is not possible.

 Support possible outside  No support – thus the  Centre axle support is
the component. use of extracting aids. possible.

158

PULLERS 8562

UNIVERSAL PULLERS PULLER – with Twin Grip

8220 For removing small parts such as battery terminals, pulleys, wheels,
ball bearings etc.
PULLER – with Twin Grip
For the safe and fast removal of discs, pulleys, wheels,
ball bearings etc.
Strong drop forged design.
Reversible hooks permit use as an internal or external puller.
Available in standard length or with extensions for extra length.

Code No. Running Max. Excl VAT
Depth Opening
040427 8562-1 0.20 629.00
040428 8562-2 1 50 60 0.22 644.00

1 70 70

8563

PULLER – with Triple Grip
For removing small parts such
as battery terminals, pulleys, wheels,
ball bearings etc.

Code No. Running Max. Excl VAT
Depth Opening
040150 8220-10 1.20 1,662.00 11
040180 8220-20 1 105 110 3.10 2,662.00
040210 8220-30 1 160 180 8.50 5,522.00 Excl VAT
040160 8220-10L 1 210 280 1.80 2,011.00
040190 8220-20L 1 200 110 4.50 3,293.00 0.31 780.00
040220 8220-30L 1 310 180 11.6 6,585.00
1 410 280
Code No. Excl VAT Code No. Running Max.
1 151 040417 8563-1 Depth Opening
040170 8220-10P 1 220 0.90 752.00
040200 8220-20P 1 308 2.00 1,230.00 8564 1 55 60
040230 8220-30P 5.00 2,721.00
PULLER – with Twin Grip

Code No. Running Max. Excl VAT Code No. Running Max. Excl VAT
Depth Opening Depth Opening
6,714.00 1.00 801.00
040460 8220-20HSP1 Puller & Spindle 1 90 180 3.60 9,578.00 040010 8564-2 1 100 110 1.90 1,090.00
7,105.00 040030 8564-3 1 140 150 2.30 1,520.00
040470 8220-30HSP3 Puller & Spindle 1 100 280 9.90 10,376.00 040050 8564-4 1 200 200 3.70 5,525.00
040440 8564-4 HSP1L Puller & Spindle
040480 8220-20L HSP1 Puller & Spindle 1 90 180 5.10 105 200 159

040490 8220-30L HSP3 Puller & Spindle 1 100 280 13.10

PULLERS

8565 8566

PULLER – with Triple Grip PULLER – with Twin Grip

Code No. 1 Running Max. Excl VAT Code No. 1 Running Max. Excl VAT
1 Depth Opening 1 Depth Opening
040020 8565-2 1 1.30 1,178.00 040070 8566-1 9.80 4,026.00
040040 8565-3 80 120 2.50 1,443.00 040080 8566-2 300 300 10.8 4,055.00
040060 8565-4 4.00 1,907.00
140 160 400 400 10.1 7,856.00
4.60 6,570.00 11.1 8,051.00
200 220 040495 8566-1 HSP3 Puller & Spindle 1 105 300
040500 8566-2 HSP3 Puller & Spindle 1 110 370
040450 8565-4 HSP1L Puller & Spindle 105 220

| GENERAL SAFETY TIPS

11  Due to the high forces applied, incorrect use of contact with the part to be pulled and are firmly
pullers can lead to serious injury. tightened so that the spindle operates centrally

 Use only original spare parts and accessories for along the axis of the puller.

your GEDORE puller.  WARNING! When using a hydraulic puller, forces

 Never use worn, modified or defective spare parts of up to several tons are generated!

or accessories. Take care to ensure that the puller is correctly

 Wear goggles and protective clothing when seated and is perpendicular to the component

being pulled.

working. For additional safety, use a safety cover.  Do not use electric, pneumatic power or
 Before pulling, ensure that the hooks are in percussion drivers on any puller.

=>

>>

160

PULLERS HSP Grease Hydraulic Pressure Spindle

8567 ... The grease hydraulic pressure spindle has been designed for
controlled and safe extraction forces of up to 15t.
PULLER – with Triple Grip
Suitable for industrial purposes and heavy agricultural Preparation for use:
and construction machines. 1. Before using, check whether the pressure spindle is screwed far

enough out of the cap, so that the pressure pad is in the initial position
in the hydraulic cylinder.
2. Unscrew the cap from the spindle body. First slacken off the
grub screw.
3. Screw the spindle body into the crossbeam of the puller from below
until the body protrudes approximately 60mm from the crossbeam.
4. Screw the cap onto the spindle body until the stop, and then fix it in
position by turning in the grub screw.

1 Hydraulic bolt 2

Adjusting cap nut Grub screw

Code No. 1 Running Max. Excl VAT Hydraulic 3
1 Depth Opening spindle 6
040090 8567-1 11.9 5,293.00
040100 8567-2 400 350 13.0 5,467.00 Tip
Ball Ø 9/16“
400 420 12.1 9,165.00 or 5/8“
13.3 9,331.00
040505 8567-1 HSP3 Puller & Spindle 1 110 345 45
040510 8567-2 HSP3 Puller & Spindle 1 110 350

8568

PULLER – with Twin Grip
Heavy duty model for the removal of discs,
pulleys, wheels, ball bearings etc.

Use and operation: 11

Code No. Running Max. Excl VAT 1. Place the puller into position and pre-tension the spindle body
Depth Opening
040110 8568-1 0.80 1,119.00 using a size 32mm or 41mm wrench.
040130 8568-2 1 100 150 1.90 1,750.00 2. Screw the pressure spindle size 12mm or 17mm into the cap.

1 140 200 The hydraulic process will come into play. The workpiece that has
been loosened by the hydraulic force may be pulled off completely

by turning the spindle body with the 32mm or 41mm cap.
3. After use, the pressure spindle (size 12mm or 17mm) is turned back

into its initial position and the pressure pad is pushed into the

hydraulic cylinder.

8569 HSP

PULLER with Triple Grip HSP GREASE HYDRAULIC PRESSURE SPINDLE
Heavy duty model for the removal of discs, The grease hydraulic pressure spindle has been designed for
pulleys, wheels, ball bearings etc. controlled and safe pulling work, and is set up for a pressure
of up to 15t.

Code No. Force Puller Ref. Excl VAT
040350 HSP1L Capacity 1.30 4,383.00
040360 HSP1 8564-4 1.20 4,233.00
040400 HSP3 1 6-ton - Twin Grip 8565-4
10-ton - Triple Grip 3.30 5,144.00
8220-20
1 6-ton - Twin Grip 8220-20L 161

8-ton - Twin Grip 8220-30
8220-30L
Code No. Running Max. 1.17 Excl VAT 1 12-ton - Twin Grip 8566-1
Depth Opening 2.70 15-ton - Triple Grip 8566-2
040120 8569-1 1,238.00 8567-1
040140 8569-2 1 80 150 2,393.00 8567-2

1 140 200

1.15 PULLERS/SPECIAL TOOLS

PULLER – with Triple Grip NUT SPLITTERS
Heavy duty model for the removal of discs, pulleys,
wheels, ball bearings etc. 1.26

NUT SPLITTER - Hydraulic
For splitting jammed or stripped nuts without damaging the bolt
thread.
With strong chisel, additionally induction hardened at the
cutting edge for breakage resistance.
The chamfer at the chisel’s edge improves the splitting effect and
prevents breakage.

Code No. For Nuts Max. Ton Excl VAT
Up To
040790 1.26/1 0.70 3,918.00
040870 1.26/2 1 22 5 3.80 6,361.00

1 32 13

Code No. Running Max. Excl VAT STUD EXTRACTORS
Depth Opening
8006190 1.15/1 1.10 1,607.00 8600
8006350 1.15/2 1 140 130 2.90 2,787.00
STUD EXTRACTOR
1 210 200 For inserting and removing studs.
Suitable for extremely short stud ends.
PULLER SAFETY COVER

5.10

11 SAFETY COVER Code No. Ømm Excl VAT

At pulling forces of 18t, these PVC safety covers 041010 8600-1 1 4 - 10 0.29 623.00
provide maximum active-safety protection from 041020 8600-2 1 8 - 25 0.57 1,100.00

suddenly detaching ball bearings, driving pinions or SPECIAL TOOLS
small parts. The safety covers are extremely flexible,
making them suitable for all applications. 1.30

Dimensions: 510x915mm. INTERNAL EXTRACTOR
For extremely tightly packed ball bearings,bearing races, bushes,
Double-ply welded = double safety (total thickness shaft seals and circlips.
at 0.5mm = 1.0mm).
Tear strength: longitudinal 23N/mm2 - lateral 21N/mm2

Two straps for variable adjustment.
Press stud fasteners for added safety – no flapping ends.
UV resistant.
Temperature resistant at -25o to +50oC

Supplied in carry bag guarantees

long service life.

Code No. Excl VAT

Code No. Excl VAT 8012750 1.30/0 1 M10 10 5-8 0.12 1,066.00
1868195 5.10 1 M10 10 8-12 0.12 1,071.00
1 1.50 3,156.00 8012830 1.30/1 1 M10 10 12-15 0.13 1,104.00
162 1 M10 14 15-19 0.17 1,155.00
8012910 1.30/2 1 M10 14 19-25 0.20 1,181.00
1 M10 14 25-30 0.30 1,228.00
8013130 1.30/3 1 M10 14 30-35 0.40 1,494.00
1 M14 x 1,5 17 35-45 0.65 1,693.00
8013480 1.30/4

8013560 1.30/4A

8013640 1.30/5

8013720 1.30/6

SPECIAL TOOLS 1.67

1.36 STEERING WHEEL PULLER FOR CARS
Contains one pair of long legs
SUPPORT BRACE and a protective cap for the thread
Operation: of the steering column.

The support brace is placed on the housing and the spindle
screwed onto the spindle of the internal extractor.
The toggle is held firmly and the bearing extracted by tightening
the nut.

Code No. Excl VAT Code No. Leg Clamping Excl VAT
8028240 1.67/1 Length Range 0.90 3,308.00
8016580 1.36 / 1 1 27 M10 0.75 1,038.00
8016660 1.36 / 2 17 135 35 - 90
1 32 M14 x 1,5 1.65 1,550.00

1.40 1.73

BEARING SEPARATOR UNIVERSAL BALL JOINT PULLER
For removing taper roller and ball bearings, inner bearing races For removing ball joints
and other tightly seated or thin walled parts. on cars and trucks.

Operation: Code No. Clamping Fork Excl VAT
The sharp edges of the separator 8030810 1.73/1 Height Depth 0.70 1,744.00
blades are pressed behind the part
and it is then withdrawn using 1 65 24
the 1.38 puller.
To avoid damage to delicate 1.85
parts, the flat surfaces
of the separator are used. BEARING INSTALLATION SET
This produces a large
support surface that Sturdy plastic bearing
prevents deformation.
installation set.
Code No. For Puller Clamping Excl VAT 11
Range Impact resistant plastic is
8019680 1.40/0 1.10 1,397.00 Excl VAT
8019760 1.40/1 1 1.38/0 5 - 60 3.60 1,765.00 light but as robust as metal 1 4.90 19,773.00
8019840 1.40/2 2.30 2,743.00
8019920 1.40/3 1 1.38/1 12 - 75 4.40 4,293.00 variants.

1 1.38/2 22 - 115 This set guarantees that the
installed bearings will not
1 1.38/3 30 - 155 suffer the damage that
might have occured when
working ‘metal to metal’.
Ensures no deformations
of the bearing housings,
sealing rings or shafts.

1.38 Code No.

SEPARATOR PULLER 1120778 1.85/1
Used together with the bearing separator 1.40 series. Contents: 33 x Impact Rings
The tension bolts are screwed into 10-50mm for external Ø 26-110mm
the threaded holes in the bearing Recoil-free Hammer - 1,2kg
3 x Aluminium Sleeves
separator.

8551

BOLT EXTRACTOR SET
Operation:

Drill a central hole into the
broken bolt.
Turn the bolt extractor to the
left into this hole until it grips
and removes the bolt.
Always use the maximum
possible extractor size.

Code No. Running Max. Excl VAT Code No. Excl VAT
Depth Opening 0.75 1,560.00
8017550 1.38/0 1.00 1,282.00 6759890 8551-88 Bolt Extractor Set 1
8017630 1.38/1 1 160 120 2.50 2,080.00 163
8017710 1.38/2 1 230 165 3.80 3,111.00 Sizes: 12345678
8017980 1.38/3 1 250 215 7.20 4,707.00
1 270 300

PULLER KITS PULLER KITS

1100-1.04 1.31

UNIVERSAL PULLER ASSORTMENT in INTERNAL EXTRACTOR SET
L-BOXX® 136 – 13 Pieces For extremely tightly packed ball bearings, bearing races, bushes,

2- and 3-arm cross-beam. shaft seals and circlips.
With rigid and slim legs and extensions.
Extra slim pulling legs for cramped spaces are attached for
self-mounting.
12 different pullers can be combined.
External Ø up to 130mm, internal Ø up to 170mm with a 200mm
clamping reach.

Code No. Contents 1 Excl VAT
8014610 1.31/1 6 Internal Extractors 12-46mm 1.30/2-6 6.40 11,361.00
2 Support Braces 1.36/1-2

2.10

CAR WORKSHOP KIT
Clearly arranged modular system on pegboard.

Code No. Contents Excl VAT Code No. 1 Excl VAT
2838362 1100-1.04 6.30 14,874.00 1088696 13.8 15,963.00
L-Boxx® 136 no. 1100L 2.10PKW
+ Assortment no. 1100 CT2-1.04
Contents
11 1.07/K
2-arm Cross Piece - 140mm
PULLER SET 3-arm Cross Piece - 140mm
In plastic case. 3 x Pulling Hooks - 100mm
Dimensions: 120x250mm. 3 x Slim Pattern Pulling Hooks - 100mm
2-arm Battery Terminal Puller
Nut Splitter
Stud Extractor
Dismantling & Assembly Fork
Universal Ball Joint Puller
Oil Filter Hook

2.30

INDUSTRIAL PULLING KIT
For the assembly of 1.06 and 1.07 pullers.
Clearly arranged modular system on pegboard.

Code No. Excl VAT
1393014 19.6 22,193.00
2.30 1

Code No. Excl VAT Contents
8117340 5.60 11,669.00
Contents: 1.07/K 1 4 x 2-arm Cross Pieces
2-arm Cross Piece
164 3-arm Cross Piece 140mm 180mm 220mm 260mm
3 x Pulling Hooks - 100mm
3 x Pulling Hooks - 200mm 4 x 3-arm Cross Pieces
3 x Slim Pattern Pulling Hooks - 250mm
140mm 180mm 220mm 260mm

2 x Spindles

Hydraulic Pressure Spindle

6 x Pulling Hooks

PULLER KITS 2.40

2.20 CONSTRUCTION MACHINE KIT
For the assembly of 1.14 and 1.15 pullers.
TRUCK WORKSHOP KIT Clearly arranged modular system on pegboard.
Clearly arranged modular system on pegboard.

Code No. 1 25.0 Excl VAT Code No. 1 24.9 Excl VAT
1088718 2.20LKW 28,062.00 1393030 2.40 18,606.00

Contents Contents

2-arm Cross Piece - 260mm 2 x 2-arm Heads
3-arm Cross Piece - 260mm 2 x 3-arm Heads
3 x Pulling Hooks - 100mm 3 x Pulling Hooks - 210mm
3 x Pulling Hooks - 300mm 3 x Pulling Hooks - 260mm
3 x Slim Pattern Pulling Hooks - 220mm 3 x Pulling Hooks - 390mm
Spindle 2 x Spindles
Hydraulic Pressure Spindle Hydraulic Pressure Spindle
Bearing Separator

INDUSTRIAL KIT CAR WORKSHOP KIT

INDUSTRIAL KIT CAR WORKSHOP KIT
Clearly arranged modular system on pegboard. Clearly arranged modular system on pegboard.

11

Code No. 1 19.6 Excl VAT Code No. 1 13.6 Excl VAT
634840 Industrial Puller Kit (7-Piece) 14,845.40 634859 13,084.40
Car Workshop Puller Kit (11-Piece)
Contents 165
Contents
8220-20 Twin Grip Puller
8220-20P Extensions 8220-10 Twin Grip Puller
8565-4 Triple Grip Puller 8220-10P Extensions
HSP 1 Hydraulic Pressure Spindle 8562-2 Battery Terminal Puller
8569-2 Universal Triple Grip Puller 8565-2 Triple Grip Puller
8600-2 Stud Extractor 8569-1 Universal Triple Grip Puller
267-40 Hammer 8600-2 Stud Extractor
1450S Tool Panel 1.38-0 Separator Puller
1.40-0 Bearing Separator Puller
1.73-1 Ball Joint Puller
1.75-1 Oil Filter Remover
267-40 Hammer
1450S Tool Panel

TOOLS FOR LIFE | SECTION 12

166

NON-SPARKING
TOOLS

Combination Spanners & Sets
Sockets & Accessories
Screwdrivers
Wrenches
Pliers
Cutters

SPANNERS/SPANNER SETS/SOCKETS/ACCESSORIES

Information SOCKETS & ACCESSORIES NON-SPARK

WHY THE NEED FOR NON-SPARKING TOOLS? GED035
The recommendation is to use GEDORE non-sparking tools in all areas where
combustible or easily ignitable vapours, liquids and dusts are; as well as where SOCKET 1/2” HEXAGON
there is potential for fire or explosion caused by sparks. Hand operated.
• Made either from proven, low sparking special bronze and copper/beryllium
Code No. 61 40 50 Excl VAT
alloys or from other non-spark inducing materials. 2496518 GED0350612S 71 40 55 POA
• The spanners are cast and not forged for your own safety. 2496488 GED0350712S 81 40 50 POA
• Corrosion resistant, even against salt water. 2496437 GED0350812S 91 40 50 POA
• Copper/beryllium tools are non-magnetic. 2496410 GED0350912S 10 1 40 50 POA
• Non-sparking tools are not as hard as conventional ones and must be used 2523795 GED0351012S 11 1 40 50 POA
2523671 GED0351112S 12 1 40 50 POA
with care. 2523523 GED0351212S 13 1 40 50 POA
• Using non-sparking tools must not be the only protective measure taken in 2523507 GED0351312S 14 1 40 55 POA
2523485 GED0351412S 15 1 40 55 POA
aeas of fire or explosion risk. 2523469 GED0351512S 16 1 40 60 POA
• It would be more accurate to refer to ‘low spark’ since ignitable sparks cannot 2523442 GED0351612S 17 1 40 65 POA
2523434 GED0351712S 18 1 40 75 POA
be 100% prevented with the use of non-sparking tools. 2523426 GED0351812S 19 1 40 85 POA
2523396 GED0351912S 20 1 40 95 POA
COMBINATION SPANNERS NON-SPARK 2523361 GED0352012S 21 1 40 100 POA
2523353 GED0352112S 22 1 40 110 POA
GED0130 2523337 GED0352212S 23 1 40 120 POA
2523302 GED0352312S 24 1 40 125 POA
COMBINATION SPANNER 2517965 GED0352412S 25 1 40 130 POA
With same size each end, ring bi-hexagon. 2523280 GED0352512S 26 1 40 145 POA
2523264 GED0352612S 27 1 40 150 POA
Code No. Excl VAT 2523248 GED0352712S 28 1 40 175 POA
2510855 GED0130006S 2523213 GED0352812S 29 1 40 185 POA
2510847 GED0130007S 6 1 130 50 POA 2523183 GED0352912S 30 1 40 195 POA
2510839 GED0130008S 7 1 2523167 GED0353012S 32 1 42 240 POA
2510820 GED0130009S 8 1 130 55 POA 2523140 GED0353212S POA
2509148 GED0130010S 9 1
2509121 GED0130011S 10 1 135 55 POA
2509113 GED0130012S 11 1
2509105 GED0130013S 12 1 150 95 POA
2509091 GED0130014S 13 1
2509083 GED0130015S 14 1 150 85 POA
2509075 GED0130016S 15 1
2509067 GED0130017S 16 1 150 90 POA
2509040 GED0130018S 17 1
2509032 GED0130019S 18 1 190 170 POA
2509024 GED0130020S 19 1
2509016 GED0130021S 20 1 190 165 POA
2509008 GED0130022S 21 1
2508990 GED0130023S 22 1 190 160 POA
2508982 GED0130024S 23 1
2508974 GED0130025S 24 1 210 230 POA
2508966 GED0130026S 25 1
2508958 GED0130027S 26 1 210 230 POA
2508923 GED0130028S 27 1
2508915 GED0130029S 28 1 210 220 POA
2508907 GED0130030S 29 1
2508893 GED0130032S 30 1 230 330 POA
32 1
230 330 POA GED0360

230 325 POA REVERSIBLE RATCHET
For hand operated sockets.
250 360 POA

12 250 355 POA

250 350 POA

270 500 POA

270 475 POA

270 470 POA

280 665 POA

280 680 POA

280 630 POA

300 730 POA

300 650 POA Code No. Excl VAT
2513684 GED0360012C
1 250 590 POA
GED042
GED0130
EXTENSION 1/2”
COMBINATION SPANNER SET For hand operated sockets.
Sets of the most common sizes.

Code No. Excl VAT
2506335 GED0420002S
Code No. Contents Pieces Excl VAT 2506270 GED0421434S 1 100 180 POA
POA 2506319 GED0420121S
2493551 GED0130003S 8 10 11 12 13 14 16 17 18 19 22 1 11 2200 POA 1 200 315 POA

2493578 GED0130001S 10 11 12 13 14 17 19 22 24 27 30 32 1 12 4100 1 250 360 POA

168

SOCKETS/ACCESSORIES/SCREWDRIVERS//WRENCHES/PLIERS/CUTTERS

GED0410 SCREWDRIVERS NON-SPARK

SWIVEL HANDLE 1/2” GED080
For hand operated sockets.
SCREWDRIVER SET – 5 Pieces

Code No. 1 250 560 Excl VAT
2507927 GED0410013S 1 300 920 POA
2507897 GED0410016S POA

GED0400 *Picture may differ from actual product.

SLIDING T-BAR 1/2” Code No. Contents Excl VAT
For hand operated sockets. 515 POA
2499061 GED0800002C 4,5x100mm 6x150mm
6x100mm
8x150mm
PH1 PH2

PLIERS NON-SPARK

GED053

PIPE WRENCH – American Pattern

Code No. Excl VAT
2511886 GED0400114S
1 250 450 POA
GED0400
Code No. 1 385 1370 Excl VAT
UNIVERSAL JOINT 1/2” 2517310 GED0530385S POA
For hand operated sockets.
GED048

ADJUSTABLE WRENCH

Code No. Excl VAT

2503166 GED0482000C 1 200 200 POA

2503158 GED0482500C 1 250 400 POA

Code No. Excl VAT 2503131 GED0483000C 1 300 700 POA
2514788 GED0400118S
1 70 135 POA 12
GED0430
GED060
SOCKET SET 1/2”
In plastic case. COMBINATION PLIERS
With two-component handle.

Code No. Excl VAT
2514753 GED0602000C
1 200 425 POA
GED066

POWER SIDE CUTTERS
With two-component handle.

*Picture may differ from actual product.

Code No. Contents Excl VAT
2503239 GED0430002S
Reversible Ratchet 1/2” 4100 POA
Extension 1/2” 150mm
Sliding T-bar 1/2” 320mm Code No. Excl VAT
Swivel handle 1/2” 380mm 2522659 GED0662650C
Sockets: 10 11 12 13 14 15 16 1 190 290 POA
17 18 19 2 0 21 22 23 24 25
26 27 28 29 30 32mm

169

TOOLS FOR LIFE | SECTION 13

170

APPRENTICE
TOOLKITS

Construction Machinery Toolkit
Mechanic’s Toolkit
Automotive Electrician’s Toolkit
Electrician’s & Refrigeration
Mechanic’s Toolkit

171

APPRENTICE TRAINING SOLUTIONS

APPRENTICE TOOLKITS

Construction Machinery Toolkit

For construction apprentices and tradesmen.
Sheetmetal tool trunk and tool trolley Lockable Phosphated to prevent corrosion Powder coated

13

172

APPRENTICE TRAINING SOLUTIONS

Contents

Tool Trolley: 1525 Tool Chest: 1425

Foam Inserts: 1525-41-1B 1525-41-400 1525-41-403

1525-41-4550 1525-41-D32 1525-41-8601

1525-27-62 1525-27-PH 1525-27-PL

Accessories:

62/150mm Adjustable Wrench 4550-20 Torque Wrench 1990-125 Extension

62/450mm Adjustable Wrench 702-21M Feeler Gauge Set 1990-250 Extension

145/250 Universal Pliers 9300.00 Key File Set 1985 Speed Brace

137-250 Grip Pliers 9534.05 Tape Measure 1987 Sliding T-bar

8000-A2 Circlip Pliers Scriber-MS/ST-190mm 1997-375 Swivel Handle

8000-J2 Circlip Pliers Multimeter 1993U-10T Ratchet

8250-200 JC Combination Pliers Caliper-Vernier 150x0.02mm 3295 Universal Joint

8132-200 JC Telephone Pliers File Thread Restorer 3290-200 Extension

8316-200 JC Side Cutters 403 Hacksaw 3290-400 Extension

8531-250 Tin Snips 3081 L-handle 3287 Sliding T-bar

8601-500 Ball Pein Hammer 3090-125 Extension 3293U-1 Ratchet

8601-900 Ball Pein Hammer 3090-250 Extension 3296 Swivel Handle

267-60mm Recoil-free Hammer 3019 Adapter 4179.15 Extension

9270.02 Rubber Mallet 3095 Universal Joint 4179.50 Extension

95-125 Flat Chisel 3087 Sliding T-bar 4179.70 Sliding T-bar

95-150 Flat Chisel 3093 Z94 Ratchet 4179.80 Universal Joint

95-175 Flat Chisel 1995 Universal Joint 4190.50 Reversible Ratchet

116A Pin Punch Set 1990-75 Extension

Sockets: 4177.

4 4.5 5 5.5 6 7 8

9 10 11 12 13 14

D30

8 9 10 11 12 13

14 15 16 17 18 19

20 21 7/16 AF 9/16 AF 7/8 AF

C19

8-5/16 10-3/8 11 12 13-1/2 14

15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16

22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16

32-1.1/4

D19

5/16 AF 3/8 AF 7/16 AF 1/2 AF 9/16 AF 5/8 AF

11/16 AF 3/4 AF 13/16 AF 7/8 AF 15/16 AF 1 AF

1.1/16 AF 1.1/8 AF

C32

19-3/4 22-7/8 24-15/16 26-1 27-1.1/16 29-1.1/8

30-1.3/16 32-1.1/4 33-1.5/16 38-1.1/2 41-1.5/8 46-1.13/16

50-2

D32

1.3/8 AF 1.7/16 AF 1.11/16 AF 1.3/4 AF 1.7/8 AF
4171. T20 T25 T27 T30 T40
Screwdriver Bit T10 T15 PZ 2 PZ 3
TORX® Sockets: 4172.
PZ 0 PZ 1
Screwdriver Bit
Sockets:

4178.

3 4 5 6 8 10

4179.

PH 0 PH 1 PH 2 PH 3

TORX® Sockets: 4174. E5 E6 E7 E8 E10 13

ITX19 173

T20 T25 T27 T30 T40 T45 T50

TX19 E10 E12

TX30 E5 E6 E7 E8

Allen Key Sockets: IN19

5/16 AF 3/8 AF 1/2 AF 9/16 AF 5/8 AF

Spanners: No. 1B-26M

6 7 8 9 10 11 12 13 14

15 16 17 18 19 20 21 22 23

24 25 26 27 28 29 30 32

No. 1B-13A

1/4 AF 5/16 AF 3/8 AF 7/16 AF 1/2 AF

9/16 AF 5/8 AF 11/16 AF 3/4 AF 13/16 AF

7/8 AF 15/16 AF 1 AF

No. 1B

1.1/4 AF 1.5/16 AF 1.3/8 AF 1.1/2 AF 1.1/8 AF 1.1/16 AF

No. 400 Flare Nut

17x19 22x24 7/16x1/2 9/16x5/8 5/16x3/8

Allen Keys: 42L-9M in Plastic Holder

1,5 2 2,5 3 4 5 6 8 10

42-9P

1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8”

Screwdrivers: 150MS 0.8x4.0x100 1,2x6,5x150 1,6x10.0x200

160PHS 1x80 2x100 3x150

Code No. 145.53 Excl VAT
668119 Construction Machinery Toolkit (261-Piece) 60,726.92

APPRENTICE TRAINING SOLUTIONS

Mechanic’s Toolkit

For diesel, forklift, motor, tractor, motorcycle, diesel fuel injection mechanic and diesel fitter apprentices and tradesmen.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380mm

Code No. 41500 Excl VAT
668036 1410 Mechanic’s Toolkit (119-Piece) 19,350.08

Contents

4-DRAWER TOOL TRUNK with rubber anti-slip mats

D19 Bi-hexagon Sockets 8 10 11 12 13 14 15 16 17 19 21 22 23 24 27 28 30 32
14 15 16 17 18 19 20 21 22 24
Combination Spanners 6 7 8 9 10 11 12 13 19

Combination Swivel Head Spanners 10 11 12 13 14 15 16 17

No.62 Shifting Spanners 200mm 300mm

Hammers 8601-100 Ball Pein 8601-700 Ball Pein 267-40 Recoil-free

42-88M Allen Key Set 2 2,5 3 4 5 6 7 8 9 10

42-88P Allen Key Set 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8”

Pin Punches (with holder) 119-3 119-4 119-5 119-6 119-7 119-8

Mechanic’s Screwdrivers: 1,6x10,0x200 Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0,8x4,0x125
(160PHS) PH2x100 (170ELS)
(150MS) 1,2x8,0x175 PH3x150

1,2x6,5x150

13 8531-250mm Tin Snips 36/1 Strap Wrench Safety Glasses - Clear
250mm Flat File
10pc Drill Set 1-10mmx1.0mm Thread Restorer - Metric 100-16 Centre Punch
300mm Stainless Steel Ruler
250mm Half-round File 250mm Round File 702-21M Feeler Gauge
8000-J2 Internal Circlip Pliers
95-175 Cold Flat Chisel 95-200 Cold Flat Chisel 8316-200 JC Side Cutters
300ml Brass Pump Oil Can
Engineer’s Scriber Engineer’s Square 1987 Sliding T-bar
1995 Universal Joint
No.403 Hacksaw - 300mm 8000-A2 External Circlip Pliers

8132-200 JC Long Nose Pliers 8250-200 JC Combination Pliers

145-250 Waterpump Pliers 137-250 Vice Grip

1993Z-94 Ratchet 1985 Speed Brace Handle

1990/125 Extension 1990/250 Extension

Spark Plug Socket: No.50 - 20,8mm Spark Plug Socket: No.54 - 16mm

Optional Extras

Code No. 560 Excl VAT
8699370 95-300 Cold Flat Chisel 320
1824910 9000.00 Digital Measuring Caliper 200 370.00
2250381 9534.05 Tape Measure - 5m 1625 651.70
645346 227-350mm Pipe Wrench
0120130 19mm Suction 20 88.66
0120120 22mm Suction 20 488.50
0120100 Circuit Tester 40
0120110 Dial-type Tyre Pressure Gauge 120 88.10
634026 400-5M Flare Nut Spanner Set 710 88.10
617989 INX19 PM-5D Spline Socket Set 1320 143.60
888.00
1,224.40
1,877.50

174

APPRENTICE TRAINING SOLUTIONS

Automotive Electrician’s Toolkit

For automotive electrician apprentices and tradesmen.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380mm

Code No. 35500 Excl VAT
668028 1410 Automotive Electrician’s Toolkit (142-Piece) 14,628.03

Contents

4-DRAWER TOOL TRUNK with rubber anti-slip mats 10 11 12 13 14 15 16 17 18 19 20 21 22
Combination Spanners 6 7 8 9 Extensions - 50, 100mm Universal Joint 9.0
¼” Socket Set: 52-Piece 44177.20 Ratchet 4.0 4.5 5.0 5.5 6.0 7.0 8.0 Sliding T-handle Power Handle
E 4 E 5 E 6 E 7 E 8 E10
Sockets 6 7 8 10 10.0 11.0 12.0 13.0 14.0
4.0 5.5 6.5
Deep Sockets 3 4 5 6 8 10
Bits

TX 8 TX10 TX15 TX20 TX25 TX27 TX30 TX40 PZ 1 PZ 2 PZ 3

PH 1 PH 2 PH 3

Tube Spanner Set 26 RS2 Tommy Bar 8x9 10x11 12x13 14x15 16x17 18x19

42-88M Allen Key Set 2 2,5 3 4 5678 9 10

42-88P Allen Key Set 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8” 13

Mechanic’s Screwdrivers: 1,2x8,0x175 Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0,8x4,0x125
(170ELS)
(150MS) 1,2x6,5x150 (160PHS) PH2x100

PH3x150

Pin Punches (with holder) 116-3 116-4 116-5 116-6 116-7 116-8 Centre Punches 100-10 100-16

Hammers 267-40 Recoil-free 8601-700 Ball Pein

8132AB-160 TL Telephone Pliers 8132-160 JC Long Nose Pliers 8250-200 JC Combination Pliers
Heavy Duty Crimping Pliers
8316-160 JC Side Cutters 145-250 Waterpump Pliers 62-200 Shifting Spanner
Digital Multimeter
Wire Stripper 8516-250 Tin Snips 300mm Ruler
Safety Glasses - Clear
Needle File Set: 12-Piece in plastic pouch Box Wrench Set: 8-Piece in plastic pouch

Circuit Tester 9100.00 Retractable Trimming Knife

Engineer’s Scriber No.403 Hacksaw - 300mm

Optional Extras

Code No. 560 Excl VAT
8699370 95-300 Cold Flat Chisel 400 370.00
8698990 95-200 Cold Flat Chisel 100 238.90
0120210 Junior Hacksaw 570 73.90
745995 134-250 Vice Grip 320 306.30
1824910 9000.00 Digital Measuring Caliper 200 651.70
2250381 9534.05 Tape Measure - 5m 585 88.66
614335 1985 Speed Brace Handle 119 217.60
636614 No.50 - 20.8mm Spark Plug Socket 201.30
636622 No.54 - 16mm Spark Plug Socket 96 248.30
6547950 702-21M Feeler Gauge 70 348.00
0120000 10-Piece Drill Bit Set - 1-10mm 510 495.00
614610 D19HMZ Socket Set 1930
1,370.50

175

APPRENTICE TRAINING SOLUTIONS

Electrician’s & Refrigeration Mechanic’s Toolkit

For electrician and refrigeration mechanic apprentices and tradesmen.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380mm

Code No. Excl VAT
668001 1410 Electrician’s & Refrigeration Mechanic’s Toolkit (138-Piece) 38500 16,418.99

Contents

4-DRAWER TOOL TRUNK with rubber anti-slip mats 10 11 12 13 14 15 16 17 18 19 20 21 22
Combination Spanners 6 7 8 9 Extensions - 50, 100mm Universal Joint
¼” Socket Set: 52-Piece 44177.20 Ratchet 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 Sliding T-handle Power Handle

Sockets 10.0 11.0 12.0 13.0 14.0

Deep Sockets E 4 E 5 E 6 E 7 E 8 E10
Bits
6 7 8 10

4.0 5.5 6.5 3 4 5 6 8 10

TX 8 TX10 TX15 TX20 TX25 TX27 TX30 TX40 PZ 1 PZ 2 PZ 3

PH 1 PH 2 PH 3

½” Socket Set: 13-Piece 1993Z-94 Ratchet 1990-125 Extension
(D19HMZ)
D19 Bi-hexagon Sockets 8 10 11 12 13 14 15 16 17 19 22
42-88M Allen Key Set
13 2 2,5 3 4 5678 9 10
42-88P Allen Key Set
Mechanic’s Screwdrivers: 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8”
(150MS) 116-8
1,2x8,0x175 Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0,8x4,0x125
1,2x6,5x150 (160PHS) PH2x100
PH3x150 (170ELS)

Pin Punches (with holder) 116-3 116-4 116-5 116-6 116-7

Hammers 8601-100 Ball Pein 8601-700 Ball Pein 267-40 Recoil-free

250mm Flat File 250mm Half-round File 250mm Round File

100-16 Centre Punch 95-175 Cold Flat Chisel 300mm Stainless Steel Ruler

Heavy Duty Crimping Pliers 9100.00 Retractable Trimming Knife Digital Multimeter
Circuit Voltage Tester No.403 Hacksaw - 300mm
Wire Stripper

Box Wrench Set: 8-Piece in plastic pouch 62-200 Shifting Spanner 62-300 Shifting Spanner

137-250 Vice Grip 145-250 Waterpump Pliers 8132-200 JC Long Nose Pliers

8250-200 JC Combination Pliers 8316-200 JC Side Cutters Engineer’s Scriber

Safety Glasses - Clear

Optional Extras

Code No. 400 Excl VAT
8698990 95-200 Cold Flat Chisel 1625
645346 227-350 Pipe Wrench 238.90
6701540 8000-A2 External Circlip Pliers 167 488.50
6703400 8000-J2 Internal Circlip Pliers 146 206.70
1824910 9000.00 Digital Measuring Caliper 320 188.80
2250381 9534.05 Tape Measure - 5m 200 651.70
0120060 Engineer’s Square 220
2250330 9530 Spirit Level 630 88.66
354.00
123.58

176

13

177

TOOLS FOR LIFE | SECTION 14

178

ARTISAN’S
TOOLKITS

Electrical - Light Current
Electrical - Medium Current
Farmer’s Toolkit
General Artisan’s Toolkit
Technician’s Rucksack Toolset
Electrician’s Toolset

179

ARTISAN TOOLKIT SOLUTIONS

ARTISAN’S TOOLKITS

Electrician’s Toolkit – Light Current

For electricians.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380

Code No. Excl VAT
668110 Electrician’s Light Current Toolkit (38-Piece) 32.2 9,473.24

Contents

4-DRAWER TOOL TRUNK with rubber anti-slip mats

Combination Spanners 6 7 8 9 10 11 12 13

No.62 Shifting Spanner 150mm

No.60CP Shifting Spanner 250mm

Hammer 8601-500 Ball Pein

42-88M Allen Key Set 2 2,5 3 4 5 6 8 10

Mechanic’s Screwdrivers: 1,2x6,5x150 Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0,5x3,0x100
(150MS) (160PHS) PH2x100
(170ELS) 0,8x4,0x125

1,2x6,5x200

137 250mm Vice Grip 145-250 Waterpump Pliers Junior Hacksaw
8250-200 JC Combination Pliers Wire Stripper
8133-180 JC Long Nose Pliers Digital Multimeter 9534.05 Tape Measure - 5m
8316-160 JC Side Cutters No.403 Hacksaw - 300mm
Universal Panel Key 9100.00 Retractable Trimming Knife

9930 Torch

14

180

ARTISAN TOOLKIT SOLUTIONS

Electrician’s Toolkit – Medium Current

For electricians.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380

Code No. Excl VAT
668113 Electrician’s Medium Current Toolkit (58-Piece) 32.2 17,227.24

4-DRAWER TOOL TRUNK with rubber anti-slip mats Contents

VDE 2133 Nut Driver 67 8 9 10 11 12 13
10 11 12 13
Combination Spanners 6789
5 6 8 10
No.62 Shifting Spanners 150mm 300mm

Hammer 8601-500 Ball Pein

42-88M Allen Key Set 2 2,5 3 4

Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0.5x3x100
(VDE 160PHS) PH2x100
PH3x150 (VDE 170ELS) 0.8x4x100

1.2x6.5x150

No.403 Hacksaw - 300mm 145-250 Waterpump Pliers 137-250 Vice Grip
VDE 8314-140 Side Cutters
VDE 8132-160 Telephone Pliers VDE 8250-200 Combination Pliers Junior Hacksaw
9930 Torch
Wire Stripper Digital Multimeter Universal Panel Key

Circuit Voltage Tester D19 HMZ Socket Set

VDE 4522 Cable Knife 9534.05 Tape Measure - 5m

Heavy Duty Crimping Pliers 14

181

ARTISAN TOOLKIT SOLUTIONS

Farmer’s Toolkit

For farmers.
Sheetmetal toolbox Lockable Strong structure, smooth operating hinges Phosphated and powder coated to prevent corrosion
Robust round carrying handle L=650 x W=260 x H=160

Code No. Excl VAT
668111 Farmer’s Toolkit (89-Piece) 32.4 14,878.34

1270 SHEETMETAL TOOLBOX Contents

Combination Spanners 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

No.62 Shifting Spanner 300mm 119-4
Electrician’s Screwdrivers: 0,8x4,0x125
Ball Pein Hammer 8601-900 (170ELS)

42-88M Allen Key Set 2 2,5 3 4 5 6 8 10 9930 Torch
Fencing Pliers 1000-300mm
106 Tool Punch Set (with holder) 97-125 97-150 98-125 99-12-3 100-10 9534.05 Tape Measure - 5m
250mm Round File
Mechanic’s Screwdrivers: 1,2x8,0x175 Phillips Screwdrivers: PH1x80 250mm Flat File
(160PHS) PH2x100 Leather Gloves
(150MS) 1,2x6,5x150 PH3x150 Junior Hacksaw
8601/900 Ball Pein Hammer
8531-250mm Tin Snips Spark Plug Socket: No.50 - 20,8mm
8316-200 JC Side Cutters
C19 TMZ Socket Set 38-500 Tyre Lever
9100.00 Retractable Trimming Knife
No.403 Hacksaw - 300mm 250mm Half-round File
8132-200 JC Long Nose Pliers
145-250 Waterpump Pliers 95-250 Cold Flat Chisel
30mm Brass Yale Padlock
Digital Multimeter 227-350mm Pipe Wrench

8250-200 JC Combination Pliers

137-250 Vice Grip

702-20M Feeler Gauge

39-610 Tyre Lever

14

182

ARTISAN TOOLKIT SOLUTIONS

General Artisan’s Toolkit

For general artisans.
Sheetmetal tool trunk Lockable Phosphated to prevent corrosion Powder coated L=570 x W=397 x H=380

Code No. Excl VAT
668112 Artisan’s Toolkit (129-Piece) 42.0 16,993.37

Contents

4-DRAWER TOOL TRUNK with rubber anti-slip mats

Combination Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24

No.62 Shifting Spanner 300mm

116A Pin Punch Set (with holder) 116-3 116-4 116-5 116-6 116-7 116-8
¼” Socket Set: 52-piece 44177.20 Ratchet
Extensions - 50, 100mm Universal Joint Sliding T-handle Power Handle
Sockets
4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0
Deep Sockets
E 4 E 5 E 6 E 7 E 8 E10

6 7 8 10

Bits 4.0 5.5 6.5 3 4 5 6 8 10

TX 8 TX10 TX15 TX20 TX25 TX27 TX30 TX40 PZ 1 PZ 2 PZ 3

PH 1 PH 2 PH 3

Hammers 8601-700 Ball Pein 267-40 Recoil-free

42-88M Allen Key Set 2 2,5 3 4 5 6 8 10

Mechanic’s Screwdrivers: 1,2x8,0x175 Phillips Screwdrivers: PH1x80 Electrician’s Screwdrivers: 0,8x4,0x125
(160PHS) PH2x100 (170ELS)
(150MS) 1,2x6,5x150 PH3x150

C19 HMZ Socket Set 9100.00 Retractable Trimming Knife Safety Glasses - Clear

9930 Torch Vernier 250mm Flat File

250mm Half-round File 250mm Round File 100-16 Centre Punch 14

8133-180 JC Triple Pliers 95-250 Cold Flat Chisel 300mm Stainless Steel Ruler

Engineer’s Scriber Engineer’s Square 227-350 Pipe Wrench

No.403 Hacksaw - 300mm Spark Plug Socket: No.50.20.8 9534.05 Tape Measure - 5m

8132-200 JC Long Nose Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters

145-250 Waterpump Pliers 137-250 Vice Grip 8531-250 Tin Snips

183

ARTISAN TOOLKIT SOLUTIONS

Technician’s Rucksack Toolset

For technicians.
 Double stitched and bound  Very durable water repellent inner lining  Heavy duty zip  Reinforced padded back

Code No. Excl VAT
668120 Technician’s Rucksack Toolset (41-Piece) 8.61 5,254.08

Contents

GEDORE RUCKSACK 6X7 8X9 10x11 12x13 14x15 16x17 18x19 20x22
Open-end Spanners 200H 4 5 68
No.62 Shifting Spanner 8601-500 Ball Pein
Hammer 2 2,5 3
42-7M Allen Key Set

Phillips PH1x80 Electrician’s 0.5x3x100 Mechanic’s 1.2x6.5x150
Screwdrivers: PH2x100 Screwdrivers: 0.8x4x125 Screwdriver:
(60PHS) (170ELS) 1.2x6.5x200 (150MS)

145-250 Waterpump Pliers 8250-200JC Combination Pliers 8316-200JC Side Cutters

9100.00 Utility Knife Leather Gloves 9930 Torch

SR-C19Z-10 Socket Set

14

184

ARTISAN TOOLKIT SOLUTIONS

Electrician’s Toolset

For electricians.
 Double stitched and bound  Very durable water repellent inner lining  Heavy duty zip  Reinforced inners

Code No. Excl VAT
668122 Electrician’s Toolset (29-Piece) 6.1 8,958.44

GEDORE ELECTRICIAN’S TOOL CASE Contents

1B Combination Spanners 8 10 13 17 19
4
No.62 V Shifting Spanner 250V 5 6 8 10
8 10
Hammer 8601-300 Ball Pein

42-88M Allen Key Set 2 2,5 3

2133 VDE Nut Drivers 46 13 14

Phillips VDE 160PHS 1x80 Electrician’s VDE 170ELS 0.5x3x100
Screwdrivers: VDE 160PHS 2x100 Screwdrivers: VDE 170ELS 0.8x4x100
(60PHS) VDE 160PHS 3x150 (170ELS) VDE 170ELS 1.2x6.5x150

145-250 Waterpump Pliers VDE 8250-200H Combination Pliers VDE 8314-160H Side Cutters
VDE 8098-160H Stripping Pliers 137-175 Grip Pliers VDE 8132-200H Telephone Pliers
9930 Torch Digital Multimeter VDE 4522 Cable Knife
9534.05 Tape Measure - 5m

185

TOOLS FOR LIFE | SECTION 15

186

SORTIMO

Sortimo General Tool
Assortment
L-BOXX® 136 With Front Handle
L-BOXX® Roller
I-BOXX® Rack Activ
I-BOXX® 72
Universal Puller Assortment in
L-BOXX® 136

 The Challenge  The Solution

The perfect ‘To Go’ workshop The GEDORE “MIXX & CLICK” kit

The terms of reference:  Well-structured and logical tool assortments and tool
modules in the Sortimo® Transport box system.
 Tools, machines and materials must be easily, safely, quickly
and conveniently be transported to the place of use i.e. in a  GEDORE L-BOXX® 136 with front grip and GEDORE
preferably, resources saving manner. i-BOXX® 72 powered by Sortimo® form the tried-and-
tested basis for GEDORE ‘MIXX AND CLICK’.
 Lengthy loading times must be avoided at all cost –
guaranteed load securing a pre-condition here!  Every GEDORE L-BOXX® is supplied with a diagram in
the lid to maintain order and optimise storage space.
 GEDORE’s Sortimo® transport box system relies on a
tried-and-tested mobility standard.  The ‘To Go’ workshop is perfectly suited for mobile
deployments.
 The perfect alliance for intelligent, e cient process and
project design planning.  Multiple compatibility and thus extremely exible
and highly individualised:
• The GEDORE ‘MIXX AND CLICK’ kit features untold
combinations based on your requirements and
also on the modules of other manufacturers
(e.g. Bosch electrical tools) .
• This in combination with other Sortimo®
components (transport boxes and system
components) gives rise to a well organised mobile
workshop.
• Perfectly tailored to your personal needs.

15

188

GEDORE SORTIMO Sortimo General Tool Assortment

 The Advantages Dimensions: L=442 x W=357 x H=151mm

 Intelligent order systems
 Flexible, modular and individual
 Ideal for mobile deployments
 Diverse and highly e cient
 Quick accessing of tools – perfect organisation
 Transport box standard – e.g. compatible with

electrical tool manufacturers
 Guaranteed safety

Code No. Excl VAT
677001 Tool Assortment (26-Piece) 8.9 6,012.30

Contents

Accessories: 145-250 Waterpump Pliers 8250-200 JC Combination Pliers

Sockets: 95-200 Cold Chisel 8316-200 JC Side Cutters
Allen Keys: Voltage Tester 140-2K 1990-125 Extension
Screwdrivers:
1993U-10T Ratchet 1990-250 Extension

1987 Sliding T-bar No.62 Shifting Spanner - 200mm

8601-500 Ball Pein Hammer

D19 Bi-hexagon

10 11 12 13 14 15
19 21 22
16 17 18

24

42-88M

2 2,5 3 4 5 6 8 10
2x100
150MS 1,2x6,5x150

160PHS 1x80 3x150

170ELS 1,0x5,5x150

15

189

1100 L GEDORE SORTIMO

GEDORE L-BOXX® 136 with Front Handle 1101 L
Rugged construction.
Impact-resistant ABS plastic. GEDORE I-BOXX® 72
Splashproof. Small parts case with practical transparent cover.
Top and front handle for variable transport of the L-BOXX®. Ideal for keeping small parts and accessories.
With tool board for order and more storage space. Optional inset boxes i3 for an individual range.
Easy-click plug system: Practical plug connection for two or more Comfort handle.
L-BOXX®es, for secure grip and easy transport. Dimensions: W=367 x D=316 x H=72mm.
For integration in vehicles with Sortimo® vehicle equipment.
Dimensions: W=442 x D=357 x H=151mm.

Code No. WD H Excl VAT
2823705 1101 L 900 530.00
367 316 72

Stackable 1100-1.04

Code No. WD H Excl VAT UNIVERSAL PULLER ASSORTMENT IN L-BOXX® 136 – 13 Pieces
2658186 1100 L 1,335.00 2- and 3-arm cross-beam.
442 357 151 2200 With rigid slim legs and extensions.
Extra-slim pulling legs for cramped spaces are attached for
self-mounting.
12 different pullers can be combined.
External Ø up to 130mm, internal Ø up to 170mm with a 200mm
clamping reach.

1100 R

GEDORE L-BOXX® ROLLER
Practical, mobile platform for all L-BOXX®.
Simply fit and click into place.
Four swivel castors for self-assembly of which two have brakes.
Load capacity up to 100kg.

Code No. WD H Excl VAT Code No. Contents Excl VAT
2823756 1100 R 3,154.00 2838362 1100-1.04 14,874.00
646 492 184 3800 L-Boxx® 136 no. 1100L
+ assortment no. 1100 CT2-1.04
6300

15 1101 K The heart of the kit – GEDORE L-BOXX® 136
with front grip powered by Sortimo® –
GEDORE I-BOXX® RACK AKTIV features:
Shelf-like holder for any i-BOXX® 72 (No. 1101 L, 1101 CT).
Easy click attaching system, thus compatible with the GEDORE  A sturdy construction.
L-BOXX® 136 or with any other L-BOXX®  Easy and convenient transportation of tools to the place of use.
on the market.  Impact-resistant ABS plastic .
 Standard lid handle to carry the L-BOXX® horizontally.
Code No. WD H Excl VAT  Additional kind-to-hands front grip to carry the L-BOXX® vertically.
2823713 1101 K 981.00  Spray protected.
442 357 100 1100  With diagram to maintain order and optimise storage space.
190  Easy-click system: Practical connector for two or more L-BOXX®es,

for secure grip and easy transport.
 No-problem integration in vehicles with the TÜV-tested Sortimo®

vehicle fttings.

15

191

TOOLS FOR LIFE | SECTION 16

192

GEDORE
INDIVIDUAL

Our customised workshop solutions
programme can o er you a unique
solution to satisfy your speci c workplace
requirements.
Our standard range of toolboxes, cupboards,
tables and trolleys can be adapted and
modi ed to suit your speci c requirements.
In particular we can o er the following order
options:

CUSTOMISED COLOUR
CUSTOMISED EMBOSSING
CUSTOMISED LOGO
CUSTOMISED INSERTS AND
TOOL ASSORTMENTS

193

3 | GEDORE INDIVIDUAL–
4
CUSTOMISED FOR YOU

Customised colour
Customised embosssing
Customised logo
Customised tool inserts in plastic or foam

2

1

GEDORE is able to tailor-make or customise
existing GEDORE products to your own
individual requirements.
Our standard range of workshop furniture can
be adapted to suit your specific requirements.

1. Customised colour

16

194

2. Customised embossing Our customer colour options and logos can be applied
to an array of sheetmetal products which can be custom
sprayed to match your branding specifications exactly.

3. Customised logo Tool Assortment with Plastic Tool Assortment with
Inserts High-density Foam Inserts

Tool Trolley with Plastic Tool Chest with
Inserts High-density Foam Inserts

4. Modular assortments Toolboxes Tool Cabinets TToruonl kCshests &

All assortments are packed in high-density foam inserts  1260  1401  1410
or plastic references and will fit into an appropriate  1261  1401L  1425
compartment of the GEDORE tool chests, trolleys or  1270  1404N  1460
toolboxes.  1282 / 3  1404
 1282 / 5
Foam  1333 Tool Trolleys
 1335
 1510
Work Benches &  1525
Drawer Units  1530
 1500  1581
 1502

Plastic References Advantages: 16

 Easy assessment of what tools to buy.

 Spend less time ‘looking for tools’.
 Tidier workplace.
 Easy identi cation and easy access of the correct tool.
 Easily check whether the toolset is complete.
 Elimination of unnecessary tool purchases – no surplus

tool accumulation.

195

TOOLS FOR LIFE | SECTION 17

196

MERCHANDISERS

Concept Options
Merchandiser Display Unit
Socket Display Box
Screwdriver Display Unit

IN-STORE DISPLAYS

MERCHANDISERS - Concept Option 1

No. Code Opening Order No. Code Opening Order No. Code Opening Order

17 1B-6mm 600040C 1 D19 11mm 613339C 1 1997/375 614491C 1
1B-7mm 600059C 1 D19 12mm 613347C 1 D19 HMZ 614610 1
1B-8mm 600067C 1 D19 13mm 613355C 1 36/1 6327320 1
1B-9mm 600075C 1 D19 14mm 613363C 1 62 / 200mm 636819 1
1B-10mm 600083C 1 D19 15mm 613371C 1 62 / 250mm 636827 1
1B-11mm 600091C 1 D19 16mm 613398C 1 137/250mm 640670 1
1B-12mm 600105C 1 D19 17mm 613401C 1 145 / 250mm 641200 1
1B-13mm 600113C 1 D19 18mm 613428C 1 225 / 250mm 645036 1
1B-14mm 600121C 1 D19 19mm 613436C 1 534 10mm 651206C 1
1B-15mm 600148C 1 D19 20mm 613444C 1 534 11mm 651214C 1
1B-16mm 600156C 1 D19 21mm 613452C 1 534 12mm 651222C 1
1B-17mm 600164C 1 D19 22mm 613460C 1 534 13mm 651230C 1
1B-18mm 600172C 1 42-88M 012104 1 534 14mm 651249C 1
1B-19mm 600180C 1 1985 614335C 1 534 15mm 651257C 1
1B-20mm 600199C 1 1987 614343C 1 534 16mm 651265C 1
1B-21mm 600202C 1 1990/75mm 614378C 1 534 17mm 651273C 1
1B-22mm 600210C 1 1990/125mm 614386C 1 534 18mm 651516C 1
D19 8mm 613304C 1 1990/250mm 614394C 1 534 19mm 651281C 1
D19 9mm 613312C 1 1993 Z/94 614459C 1
D19 10mm 613320C 1 1995 614475C 1 1282-C19-1BMZ-PL-6SD 679232 1

198