ปกหน้า 27 ซอยรามอินทรา 48 แขวงรามอินทรา เขตคันนายาว กรุงเทพฯ 10230 TOA - Chucoku Paint (Uny Marine 100 HS)
Blast and Pressure Resistant Steel Door SPR blast resistant doors as sure blast protection and dependable service under critical conditions for interior environments including - Chemical, paint or hazardous material storage rooms - Pharmaceutical facilities, college laboratories and other R & D areas - Bioscience and nanotechnology research buildings - Refineries, petrochemical and other industrial complexes - Nuclear power stations - Engine test cells - Ammunition depots, munitions storage facilities and arsenals - And numerous other applications. To certify the swing door systems, the blast door manufacturer must supply all components including the flame, hinges, door panel and latching hardware. All of SPR swing blast doors contain these essential items. Sliding doors are also furnished with the necessary equipment ----track and trolleys, hanging brackets, door panel and blast restraints. SPR Blast resistant products have been analyzed and/or tested by an independent, nationally recognized engineering laboratory to meet the blast conditions for which they are certified. Most of the analyses are validated by actual shock tube or static pressure testing, and are either used to extend the physical sizes of door/frame assemblies or to extend the peak blast pressure and/or impluse that the designs will resist. SPR offers the Architectural and Engineering communities a wide range of blast resistant products to withstand a variety of projected blast conditions and installations. Our door assembly model designations for a standard. Blast parameter limits (pressure and duration) for each model are lower for larger doors sizes. Class 1 Low-Range Door - A door designed to withstand an equivalent static pressure that is less than 3 psi (21 kPa). Class 2 Mid-Range Door - A door designed to withstand an equivalent static pressure in the exceeds 25 psi (21 kPa to 172 kPa). Class 3 High-Range Door - A door designed to withstand an equivalent static pressure that exceeds 25 psi (172 kPa). Note 1
วงกบ ML3S วัสดุ สเตนเลส รายละเอียด - กุญแจฝังในบานแบบมอร์ทิส ล็อค 3 จุด - ก้านบิดเขาควาย - กุญแจไขด้านเดียว รหัสอุปกรณ์ 3.Pull Hand Plate PH1S วัสดุ สเตนเลส รายละเอียด มือจับขนาด 50 x 200 มม. รหัสอุปกรณ์ 4.Door Closer Non-Hold Open (Heavy Duty) DC9N วัสดุ อะลูมินัม รายละเอียด โช๊คอัพ แบบแขนไม่ตั้ งค้าง รหัสอุปกรณ์ 2 1 1 กุญแจ Mortise ล็อค 3 จุด สําหรับประตูต้านแรงระเบิดแบบบานเดี่ ยว 2.Flag Hinge (Heavy Duty) FH843 วัสดุ สเตนเลส รายละเอียด บานพับแบบสวม ขนาด 8” x 4” หนา 4 มม. รหัสอุปกรณ์ 3 3 4 4 1.Mortise Lock,L-Handle 3 Point Lock 2
วงกบ 1.Panic Exit Device Vertical PT4S วัสดุ สเตนเลส รายละเอียด คานผลักแบบตัวที ผิวสเตนเลส ล็อค 4 จุด พร้อมตัวรับล็อคติดผิววงกบ รหัสอุปกรณ์ 4.Exit Lever Lock EL1S วัสดุ สเตนเลส รายละเอียด กุญแจเปิดจากด้านนอก แบบก้านบิดเขาควาย ผิวสเตนเลส สําหรับใช้ร่วมกับคานผลัก รหัสอุปกรณ์ 3.Pull Hand Plate PH1S วัสดุ สเตนเลส รายละเอียด มือจับขนาด 50 x 200 มม. รหัสอุปกรณ์ 5.Door Closer Non-Hold Open (Heavy Duty) DC9N วัสดุ อะลูมินัม รายละเอียด โช๊คอัพ แบบแขนไม่ตั้ งค้าง รหัสอุปกรณ์ 2 1 4 คานผลักตัวทีล็อค 4 จุด ติดผิวบาน สําหรับประตูต้านแรงระเบิดแบบบานเดี่ ยว 2.Flag Hinge (Heavy Duty) FH843 วัสดุ สเตนเลส รายละเอียด บานพับแบบสวม ขนาด 8” x 4” หนา 4 มม. รหัสอุปกรณ์ 3 5 3 4 1 5 3
วงกบ ML3S วัสดุ สเตนเลส รายละเอียด - กุญแจฝังในบานแบบมอร์ทิส ล็อค 3 จุด - ก้านบิดเขาควาย - กุญแจไขด้านเดียว รหัสอุปกรณ์ 3.Dummy Handle Level Lock DMML1S วัสดุ สเตนเลส รายละเอียด ดัมมี่ก้านบิดเขาควายผิวสเตนเลส รหัสอุปกรณ์ 4.Flush Bolt FB1S วัสดุ สเตนเลส รายละเอียด กลอนฝังที่สันบาน แบบดีด รหัสอุปกรณ์ 5.Pull Hand Plate PH1S วัสดุ สเตนเลส รายละเอียด มือจับขนาด 50 x 200 มม. รหัสอุปกรณ์ 2 4 3 1 1 กุญแจ Mortise ล็อค 3 จุด สําหรับประตูต้านแรงระเบิดแบบบานค่ ู 2.Flag Hinge (Heavy Duty) FH843 วัสดุ สเตนเลส รายละเอียด บานพับแบบสวม ขนาด 8” x 4” หนา 4 มม. รหัสอุปกรณ์ 6.Door Closer Non-Hold open (Heavy Duty) DC9N วัสดุ อะลูมินัม รายละเอียด โช๊คอัพ แบบแขนไม่ตั้ งค้าง รหัสอุปกรณ์ 5 5 6 6 1.Mortise Lock,L-Handle 3 Point Lock 4
วงกบ 1.Panic Exit Device Vertical PT4S วัสดุ สเตนเลส รายละเอียด คานผลักแบบตัวที ผิวสเตนเลส ล็อค 4 จุด พร้อมเพลตรับกลอนคานผลัก รหัสอุปกรณ์ 3.Strike Plate Lock Panic Bar ST1P วัสดุ สเตนเลส รายละเอียด เพลตรับกลอนคานผลัก รหัสอุปกรณ์ 4.Flush Bolt FB1S วัสดุ สเตนเลส รายละเอียด กลอนฝังที่สันบาน แบบดีด รหัสอุปกรณ์ 6.Exit Lever Lock EL1S วัสดุ สเตนเลส รายละเอียด กุญแจเปิดจากด้านนอก แบบก้านบิดเขาควาย ผิวสเตนเลส สําหรับใช้ร่วมกับคานผลัก รหัสอุปกรณ์ 5.Pull Hand Plate PH1S วัสดุ สเตนเลส รายละเอียด มือจับขนาด 50 x 200 มม. รหัสอุปกรณ์ 2 4 1 1 คานผลักตัวทีล็อค 4 จุด ติดผิวบาน สําหรับประตูต้านแรงระเบิดแบบบานค่ ู 2.Flag Hinge (Heavy Duty) FH843 วัสดุ สเตนเลส รายละเอียด บานพับแบบสวม ขนาด 8” x 4” หนา 4 มม. รหัสอุปกรณ์ 7.Door Closer Non-Hold open (Heavy Duty) DC9N วัสดุ อะลูมินัม รายละเอียด โช๊คอัพ แบบแขนไม่ตั้ งค้าง. รหัสอุปกรณ์ 5 A A 3 5 3 6 7 6 7 5
วงกบ 2.Flag Hinge (Heavy Duty) FH843 วัสดุ สเตนเลส รายละเอียด บานพับแบบสวม ขนาด 8” x 4” หนา 4 มม. รหัสอุปกรณ์ 3.Strike Plate Lock Panic Bar ST1P วัสดุ สเตนเลส รายละเอียด เพลตรับกลอนคานผลัก รหัสอุปกรณ์ 4.Panic Exit Device Vertical PT1S วัสดุ สเตนเลส รายละเอียด คานผลักแบบตัวที ผิวสเตนเลส ล็อคบน-ล่าง รหัสอุปกรณ์ 5.Pull Hand Plate PH1S วัสดุ สเตนเลส รายละเอียด มือจับขนาด 50 x 200 มม. รหัสอุปกรณ์ 2 คานผลักตัวที ล็อค 4 จุด 1 ด้าน กับคานผลักตัวที ล็อคบน-ล่าง 1 ด้าน ติดผิวบาน สําหรับประตูต้านแรงระเบิดแบบบานคู่ 1.Panic Exit Device Vertical PT4S วัสดุ สเตนเลส รายละเอียด คานผลักแบบตัวที ผิวสเตนเลส ล็อค 4 จุด พร้อมเพลตรับกลอนคานผลัก รหัสอุปกรณ์ 6.Exit Lever Lock EL1S วัสดุ สเตนเลส รายละเอียด กุญแจเปิดจากด้านนอก แบบก้านบิดเขาควาย ผิวสเตนเลส สําหรับใช้ร่วมกับคานผลัก รหัสอุปกรณ์ 7.Door Closer Non-Hold Open (Heavy Duty) DC9N วัสดุ อะลูมินัม รายละเอียด โช๊คอัพ แบบแขนไม่ตั้ งค้าง รหัสอุปกรณ์ 4 1 5 3 4 1 3 6 7 5 6 7 6
ปกหลัง Standard Opening Width Width 1,000 x Higth 2,100 mm. (Single Door) Width 1,800 x Higth 2,100 mm. (Double Door) Maximum Opening Width Width 1,500 x Higth 3,000 mm. (Single Door) Width 3,000 x Higth 3,000 mm. (Double Door) 1,800 mm. 2,100 mm. 1,000 mm. 2,100 mm. Specification 3,000 mm. 3,000 mm. 1,500 mm. 3,000 mm. บริษัท ศุภริช จํากัด 27 ซอยรามอินทรา 48 แขวงรามอินทรา เขตคันนายาว กรุงเทพฯ 10230 โทร. 02-509-4438 แฟกซ์. 02-509-4088 Email : info@Suparich.co.th Website : www.suparich.co.th Hardwere : Fram and Reinforcing Members : H - Section & Channel Steel Primer Coat : TOA - Chucoku Paint (Umiguard SX) Finishing Paint : TOA - Chucoku Paint (Uny Marine 100 HS) 1. Butt Hinge Stainless Steel (Heavy Duty) 2. Door Closer Heavy Duty 3. Pull Handle Stainless Steel 4. Air - Tight Rubber 5. Mortise Lock,L-Handle or Panic Exit Device Vertical