SEALANT (Technical Data Sheet)

DIGITAL BOOK

TECHNICAL DATA SHEET

SEALANT

JT Construction Chemicals

Website : id-jtcc.com
Telp : (021) 82740458
Email : [email protected]

Technical Data Sheet

SEALANT

Table Contents

Table Contents.................................................................................................................................................2
Sealant .............................................................................................................................................................3

▪ Ecoseal 458 ...............................................................................................................................................4
▪ SJ P-One ....................................................................................................................................................5
▪ Hi Ureseal 5000.........................................................................................................................................6
▪ JTSealastic.................................................................................................................................................8
▪ Multiseal ...................................................................................................................................................9
▪ Multiseal Plus............................................................................................................................................10
▪ Top Fix Aqua .............................................................................................................................................11
▪ Top Fix Softan ...........................................................................................................................................12
▪ Top Seal 489..............................................................................................................................................13
▪ Top Seal 730..............................................................................................................................................14
▪ Top Seal F200............................................................................................................................................15
▪ Top Seal Top Foam ...................................................................................................................................16
▪ Ureseal 500...............................................................................................................................................17
▪ Ureseal 500SL ...........................................................................................................................................18

Sealant | 2

Technical Data Sheet

SEALANT

Solution used to block the passage of fluids through the
surface or joints or openings In materials, blocking dust, sound

and heat transmission. Also accommodate movement and
dilatation.

Sealant | 3

Technical Data Sheet

Ecoseal 458/458 SL One Component Silicone Sealant for Civil work and Road Joint

DESCRIPTION Ecoseal 458/458SL is one component silicone sealant with the same

characteristics of high elongation and low modulus as a neutral type. It is used for
joint joints in highways, parking lots, bridges, and civil works. It is a product passes
the us federal road-related standards and ASTM D5893 standards recognized by the
Korea Highway Corporation.

PROPERTIES

PACKAGING Ecoseal 458: 500 ml Sausage (20 Pc/Box)
Ecoseal 458SL: 22 Kg (19L)/Pail

Sealant | 4

Technical Data Sheet

SJ P-One One Component Polyurethane Sealant

DESCRIPTION SJ P-one is an elastic, anticorrosive, economical one-component type
Polyurethane sealant. It has excellent durability, great low modulus, and high
elongation. SJ P-one is also paintable.

PROPERTIES • A low modulus exclusive for flexible joints with a moving allowance of ±70%.

• Highly adhesive to various materials without any primer.

• Easy for use as a one-component type room temperature curing type.

• Easily squeezable for convenient work.

• Wide operational temperature ranged from -20 – 70 °C.

• Before Curing, Test condition: 23°C, RH 50%

Item Result

Color White, Grey, Green

Surface Curing Time Within 60 minutes

Perfect Curing Time Within 7 days

Curing Rate 2.0 – 2.5 mm/24 hours

Slump < 1 mm

Specific Gravity 1.32 ± 0.05

Workable Temperature 5 – 35 °C

• After Curing, Result

Item 30

Hardness (Shore A) 3.0 – 4.0 N/mm2
KS M 6518
1200 – 1500 %
Tensile Strength 70 %
ASTM D412 Good (cohesion failure)

Elongation Ratio -20 – 70 °C
Elastic Restoration Ratio
Tensile Properties at maintained

extension (100%)
Adapted Temperature

PACKAGING 600 mL Al. Foil Sausage Type, Packed 20 pcs/box

Sealant | 5

Technical Data Sheet

Hi Ureseal 5000 Two Component Polysulphide Sealant

DESCRIPTION Hi Ureseal 5000 fulfill US federal standards (FS SS-S-200E) as Polysulphide
sealant. Hi Ureseal 5000 has good oil Resistance and excellent elasticity for airport
runway, Sealant, joint, two-component, jet blast resistant, cold applied, for Portland
concrete pavement with good durability and mechanical property.

PROPERTIES • Color : Grey
• Mixed specific gravity : 1.35±0.05
• Pot Life : 2-4 hours (25oC) Unit Value
• Dry through : 24 hours (25oC)
mPa.s Less than
Test Item 150.000

Viscosity (Base,23℃)

Viscosity (Curing agent, mpa.s Less than
23℃) 150.000
Tack free time hrs Less than 12
Accelerated aging (Base) - no defects
Accelerated aging (Curing - no defects
agent)
Self-leveling (Mold A) mm Less than 3.2
Self-leveling (Mold B) mm Less than 1.6
Change in mass by fuel
immersion (apparent) - no defects

Change in mass by fuel % Less than 2
immersion (Change in dry
Less than 5
mass)
More 75
Change in Volume on % 0.5-2.0
exposure to elevated More 75
0.5-2.0
temperature

Resilience %
(unaged:recovery)

Resilience (unaged:initial mm
penetration)
%
Resilience (aged:recovery) mm
Resilience
(aged:initial penetration)

Test method: FS SS-S-200E

Sealant | 6

Technical Data Sheet 25.4 Kg per set
PACKAGING Base: 12.7 Kg
Hardener: 12.7 Kg

Sealant | 7

Technical Data Sheet

JTSealastic Hot Poured Rubber Bitumen Horizontal Joint Sealant

DESCRIPTION JTSealastic hot poured rubber bitumen horizontal joint sealant is designed for
sealing movement and construction joints in concrete pavements and floor slabs. It
possesses good adhesion to concrete and asphaltic materials.
JTSealastic is suitable for immersed joints, including low movement expansion joints,
floor joints of reservoirs, basement etc.
JTSealastic has been tested by SIRIM BHD, in accordance to BS 6920, on the suitability
for contact with drinking water, and complied with the specificationin this data
sheet.

PROPERTIES

Form Plastic Solid
Color Black
Suitability for Use in Contact with
Drinking Water, BS 6920: Part 1 Complied
Movement Accommodation Factor
BS 6093 10% for Butt
Joint
Flash Point Min 200°C
Solids Content 100%
Density 1.03 Kg/L
Application Temperature Over 5°C
Pouring Temperature 160 – 180°C

CHEMICAL RESISTANCE

Dilute Acids Resistance
Dilute Alkaline Resistance
Petroleum Solvents Not Resistance
Minerals Oils Not Resistance
Fuel Not Resistance
Greases Not Resistance

DRINKING WATER
JTSealstic is not soluble in water and therefore imparts no taint to it

PACKAGING JTSealastic: 20 Kg per Pail
ASBond: 20 Kg per Pail

Sealant | 8

Technical Data Sheet

Multiseal MS Sealant High Modulus

DESCRIPTION A multi-purpose sealant with three critical functions; sealing, adhesion, gap
filling. This sealant can be coated with paint and has good elastic recovery and UV-,
heat-, weather-proofing properties suitable for interior and exterior repair work.

PROPERTIES

1 500 mL Al. Foil Sausage Type

PACKAGING 300 mL Plastic Cartridge Type
Or others that may required

Sealant | 9

Technical Data Sheet

Multiseal Plus MS Sealant High Modulus

DESCRIPTION A multi-purpose sealant with three critical functions; sealing, adhesion, gap
filling. This sealant can be coated with paint and has good elastic recovery and UV-
, heat-, weather-proofing properties suitable for interior and exterior repair work.

PROPERTIES

PACKAGING 500 mL Al. Foil Sausage Type

300 mL Plastic Cartridge Type
Or others that may required

Sealant | 10

Technical Data Sheet

Top Fix Aqua Hybrid MS Sealant for Various Wet Conditions

DESCRIPTION MS Sealant developed with the latest Hybrid Technology that can be used in
various wet conditions, provides high strengths and flexible bonding in various
building and industrial applications.

PROPERTIES

PACKAGING 300 mL Plastic Cartridge Type

Sealant | 11

Technical Data Sheet

Top Fix Softan Hybrid MS Sealant

DESCRIPTION MS Sealant developed with the latest Hybrid Technology that has superb

elongation rate with excellent mechanical property. Outstanding vibration
prevention and shock prevention, used for wide joint movement such as precast
concrete panel joints. More-over, it can be painted with water-based paint, and has
the advantages of silicone, such as elasticity and durability

PROPERTIES

PACKAGING 300 mL Plastic Cartridge Type

Sealant | 12

Technical Data Sheet

Topseal 489 Firestop Acrylic Sealant

DESCRIPTION Acrylic (water-soluble) fire retardant sealant for fireproofing and(or)
soundproofing used in penetration areas such as cracks in dry-wall structures,cables,
and pipes in large buildings.

PROPERTIES

PACKAGING 300 mL Plastic Cartridge Type

Sealant | 13

Technical Data Sheet

Topseal 730 Heat Resistance Silicon Sealant

DESCRIPTION Heat resistant silicone sealant 730 cures fast and performs excellent adhesion. It
is especially designed to be used maximum to 260℃ continuously, and
intermittently, up to 310℃.

PROPERTIES

PACKAGING 300 mL Plastic Cartridge Type

Sealant | 14

Technical Data Sheet

Topseal F200 Firestop Silicon Sealant

DESCRIPTION Neutral cure sealant has excellent durability and heat & cold resistance and
PROPERTIES soundproof as well as fire stop effects. Therefore, suitable for fire door and fire stop
area in various buildings such as nuclear, hydroelectric, and thermal powerplants.

PACKAGING 300 mL Plastic Cartridge Type
500 mL Sausage Type

Sealant | 15

Technical Data Sheet

Topseal Top Foam One Component Flame Resisting Polyurethane Foam

DESCRIPTION Applicable to door frame filling and insulation of window, door, sash, etc. This
one component polyurethane foam, available in gun and adapter (straw) type,
cures by moisture in the air when it is sprayed out of the packaging.

PROPERTIES

PACKAGING 750ml

Sealant | 16

Technical Data Sheet

Ureseal 500 2 Component Non-Shagging Polyurethane Sealant for Pavement, Road, and Airport Environment

DESCRIPTION Ureseal 500 is an eco-friendly Polyurethane sealant with excellent resilience
and elongation. Ureseal 500 has good oil resistance and excellent elasticity for
airport runway, sealant, joint, two-component, jet blast resistant, cold applied,
for Portland concrete pavement with good durability and mechanical property.

PROPERTIES Color White, Grey
PACKAGING Flow-ability None
Working Time (25°C) Within 2 hours
Tack Free Time (25°C) Within 24 hours
Density (Kg/m3) Base: 1.73
Hardener: 1.03
Mixed Density (Kg/m3) 1.56
Hardness (shore A) 15 – 25
Tensile Strength 1.0-1.5 N/mm2
(ASTM D412)
Tensile Strength 0.6-0.8 N/mm2
(ASTM C1135)
Elongation at Break 600 – 800%
Workable Temperature Ambient: >4°C
Substrate: <40°C
12 Kg per set
• Base: 10 Kg
• Hardener: 2 Kg

Sealant | 17

Technical Data Sheet

Ureseal 500SL 2 Component Polyurethane Sealant for Pavement, Road, and Airport Environment

DESCRIPTION Ureseal 500SL is a two-component cold applied, eco-friendly two-component
Polyurethane sealant with excellent resilience and elongation. Ureseal 500SL has
good oil Resistance and excellent elasticity. Mainly use for airport runway, and
other Portland concrete pavement.

PROPERTIES Color White, Grey 2
PACKAGING Flowability Self-levelling 2
Working Time (25°C) Within 2 hours
Tack Free Time (25°C) Within 24 hours
Density (Kg/m3) Base: 1.65
Hardener: 1.03
3 1.52
15 – 20
Mixed Density (Kg/m ) 0.6-1.0 N/mm
Hardness (shore A)
Tensile Strength 0.5-0.7 N/mm
(ASTM D412)
600 – 800%
Tensile Strength Ambient: >4°C
(ASTM C1135) Substrate: <40°C
Elongation at Break
Workable Temperature

12 Kg per set
• Base: 10 Kg
• Hardener: 2 Kg

Sealant | 18