Octawall 40 Universal

OWCATLAL 40

FABRIC + PANEL

OCTAWALL 40
FABRIC + PANEL

ONE SOLUTION.
FOR FABRIC AND PANELS.
THE ALL-ROUNDER W 906.

EXAMPLE FITTING: Because it's your decision if you want fabric or panels.
OCTAwall 40 fabric + panel means more flexibility: both sides
4 offer the possibility of using fabric or panels. This doesn't just
make OCTAwall 40 incredibly flexible. It also makes storage
3 W 906 and transportation easier, because from now on, all you need
is one extrusion!
W 840 +
W 841 Today fabric - tomorrow panel.
The high quality hook and loop tape prooves itself through
Fabric the safe and tool-less installation of panels. The well-proven
system groove and silicone edge system adds tension to your
Panel fabric. Together, they offer a modern surface look and utmost
flexibility.
DIMENSIONS IN MM:
Technical details:
26 one frame element for installation of fabric and panel
panel: 4 mm rigid foam
2.5 11.820.8 7 fabric: fabric with silicon edges on all sides
7.5 4.5 hook tape W 840 + loop tape W 841
4
W 840 is pre-assembled on all frames
40 the same frame connection as with OCTAwall 40 and 60

4.3 14 (M 1477 and M 1496 respectively)
40 standard version with W 916 corner connector: making
mitres redundant
alternatively available with internal corner connector Z 990
all existing OCTAwall accessories (such as base plates, LED
spotlights, …) can be used with OCTAwall 40 fabric + panel
as well

2

TECHNICAL FEATURES

OCTAwall 40 fabric + panel

CONVENIENT.
SYSTEM GROOVE FOR FABRIC.
HOOK TAPE FOR PANELS.

3

OCTAWALL 40
FABRIC + PANEL

SEAMLESS FABRIC CORNER.
NO COMPROMISE.
THE S 382 CORNER PROFILE.

S 382 DIMENSIONS IN MM: 20.8 40 Flexible. Without interruption.
Thanks to the new S 382 corner profile, there will be no
4.3 visible corner upright anymore. The straight corner and
Ø 8.7 minimalistic design allow for around-the-corner graphics,
offering maximum advertisement space.
40
Think outside the box. Seamlessly.
W 916 DIMENSIONS IN MM: The W 916 corner connector allows for a seamless continuation
of your graphics to the corner. This creates the possibility of
an almost completely covered corner profile. The S 383 cover
plate keeps the silicone edge safely in the system groove and
closes off the profile.

24

40 45.3

4

PARTS

OCTAwall 40 fabric + panel

FRAME ELEMENT Aluminium | 1 × frame, y M 1477 NEW!
for installation between 2 frames 4 Available in
FOR FABRIC + PANEL or 2 extrusions, incl. 2 x C 440/F June 2017!
adjustable foot and mounting-set 40
FRAME PROFILE M 1477, with W 916 internal x
corner connector (no mitre needed),
FABRIC + PANEL with drillings for M 1951 and M 1953

Drillings for cable management
possible on request

W 440/E.01 frame size: 3 × mounting set
W 990 × H 2480 mm M 1477
STRAIGHT, 990 M 7.85 kg

W 442/E.01 frame size: 6 × mounting set
W 950 × H 2480 mm M 1477, for installation
STRAIGHT, 950 MM 7.76 kg between 2 extrusions

W 447/E.01 frame size: 3 × mounting set
W 495 × H 2480 mm M 1477
STRAIGHT, 495 MM 6.82 kg

W 449/E.01 frame size: 6 × mounting set
W 455 × H 2480 mm M 1477, for installation
STRAIGHT, 455 MM 6.73 kg between 2 extrusions

W 444/E.01 custom sizes
dimensions and accessories have to be stated on order
STRAIGHT, CUSTOM SIZE

W 443/E.01 curved, custom sizes Minimum radius
radius, dimensions and accessories have to be stated 990 mm
CURVED, CUSTOM SIZE on order (may not work with W 916 depending on radius)

W 906.01 26 W 906
W 916
Aluminium | can be fitted with 4.5
fabric (in combination with silicone 40
edge M 1313) or panels
6.35 kg | 6000 mm

5

T- P R O F I L E W 453.01 W 453

PANEL, FOR 90° ANGLE Aluminium | for panels, 2400
90° angle between frames, incl.
Also available in 2 × Z 961/8 tension lock
different lengths 2.44 kg | 2400 mm

W 905

T- P R O F I L E W 451.01 W 451

FABRIC, FOR 90° ANGLE Aluminium | for fabric, 2400
90° angle between frames, incl.
Also available in 2 × Z 961/8 tension lock W 903
different lengths 2.39 kg | 2400 mm

DOOR ELEMENT W 455.01 W 459 W 445

DIN RIGHT Aluminium | 1 × door DIN right,
incl. 1 × threshold band,
Attention: On frame dimensions for fabric: 2024
lock side, W 459 W 935 × H 2024 mm
frame or W 976 10.00 kg
extrusion have to

be installed

935 * installation dimension W 455
950* W 445

DOOR ELEMENT W 457.01 W 459

DIN LEFT Aluminium | 1 × door DIN left,
incl. 1 × threshold band,
Attention: On frame dimensions for fabric: 2024
lock side, W 459 W 935 × H 2024 mm
frame or W 976 10.00 kg
extrusion have to

be installed

935 * installation dimension W 457
950*
W 445
FRAME ELEMENT W 445/E.01 M 1477

MOUNTED ABOVE DOOR, 950 MM Aluminium | 1 × frame, for W 455 / W 457
mounting above door W 455
/ W 457, incl. 2 x M 1477 W 459450
mounting sets, drillings for cable 950
management available on request
3.43 kg

6

PARTS

OCTAwall 40 fabric + panel

FRAME ELEMENT W 459/E.01

FOR DOOR MOUNTING, 950 MM Aluminium | 1 × frame, with
drillings for door lock, incl. 2 ×
C 440/F adjustable foot and W 459
3 × M 1477 mounting set
7.89 kg 2480 Used on lock side
of W 455 and W
457 doors

UPRIGHT W 976.01 950 W 445
40
FOR DOOR MOUNTING Aluminium | 1 × extrusion
manufactured from 40 mm square
extrusion M 1000, with drillings 2480 Used on corners on
for door lock, incl. 1 × adjustable lock side of W 455
foot C 440/F and W 457 doors
3.14 kg | 2480 mm
W 976

W 455

UPRIGHT W 990.01

FOR CORNER, WITH Aluminium | 1 × extrusion
ADJUSTABLE FOOT manufactured from 40 mm
square extrusion M 1000, incl. 1 ×
adjustable foot W 913 M 10002480
3.2 kg | 2480 mm 40
W 913

UPRIGHT S 381.01 Rahmen/Frame
S 381
FOR CORNERS WITH SILICON Aluminium | 1 × extrusion
EDGE GROOVE manufactured from 40 mm square Rahmen/Frame
extrusion, fabric can be mounted S 383
over the profile onto the edge, 2480
manufactured from 40 mm square S 382
extrusion S 382, incl. 2 × end cap 40
S 383 and 1 × adjustable foot
W 913/1
3.62 kg l 2480 mm

EXTRUSION S 382.01 4.3

FOR CORNERS WITH SILICON Aluminium | 1 × extrusion Ø8.7
EDGE GROOVE manufactured from 40 mm square
extrusion, fabric can be mounted
over the profile onto the edge 40
7.31 kg l 5000 mm

4

40

7

END CAP S 383.35 40 4 Rahmen/Frame
6 S 383
FOR PROFILE S 382 Plastic | to mount on S 382
extrusion, to ensure the silicon S 382
edge stays in groove W 908
0.01 kg
M 1072
HINGE PROFILE W 908.01 40
4.3 E 470/C
Aluminium | two parts, 4.3 20 20 W 910
for stepless angle (90° – 180°) 40
adjustment between walls, 40
5.60 kg | 5000 mm
40
TRIANGULAR PROFILE M 1072.01 56
40 40
Can also Aluminium
be installed 4.85 kg | 6000 mm
horizontally as wall

bracing

CLADDING PROFILE W 910.01

FOR LATERAL FRAME END Aluminium | for frame elements,
to clad the lateral frame edges,
incl. 10 × E 470/C plastic clips 120
(Recommendation: 2 pcs./m), 170 12 5
1.35 kg | 5000 mm

BASE PLATE M 1941.21 40
495
SIDE, 495 × 170 MM Steel | for free-standing frame
elements, mounted both laterally
Suitable for both and on lower profile, incl. M 1951
left and right side BS (M8) mounting set,
max. frame height = 2000 mm
5.80 kg

8

PARTS

OCTAwall 40 fabric + panel

BASE PLATE M 1943.21 170 12 Attention: can
only be used in
MIDDLE, 495 × 170 MM Steel | for free-standing frame connection with
elements, additional middle plate, M 1941!
BASE PLATE mounted on lower profile, incl.
M 1953 BS (M8) mounting set, 495120 Suitable for both
SIDE, 600 X 250 MM max. frame height = 2000 mm 40 250 12 left and right side
5.05 kg
BASE PLATE 600 250 12 Attention: can
M 1951.21 only be used in
MIDDLE, 600 X 250 MM 600 connection with
Steel | for free-standing frame 40 M 1951!
BASE PLATE (HALF) elements, mounted both laterally 320
and on lower profile, incl. M 1951 12
SIDE, 320 × 250 MM BS (M8) mounting set, 320 301
max. frame height = 2500 mm
BASE PLATE (HALF) 7.36 kg 120 M 1961 M 1963 M 1961 Suitable for both
250 left and right side
MIDDLE, 320 × 250 MM M 1953.21
250 12
Steel | for free-standing frame Attention: can
elements, additional middle plate, M 1961 M 1963 M 1961 only be used in
mounted on lower profile, incl. connection with
M 1953 BS (M8) mounting set, M 1961!
max. frame height = 2500 mm
6.61 kg

M 1961.21

Steel | for free-standing frame
elements, mounted both laterally
and on lower profile, incl. M 1951
BS (M8) mounting set, for structures
close to walls, one-sided overlap,
max. frame height = 2500 mm
5.31 kg

M 1963.21

Steel | for free-standing frame
elements, additional middle plate,
mounted on lower profile, incl.
M 1953 BS (M8) mounting set,
for structures close to walls, max.
frame height = 2500 mm
5.31 kg

9

CORNER CONNECTOR W 916.39 40 W 906
11.7
FOR W 906 Zinc die-cast | incl. 2 × E 111/m 20.8 W 916
and M1510/20 screws, for 40 45.3 W 906
CORNER CONNECTOR connection of 2 fabric tension M10 Z 990
profiles W 906 or M 1307
FOR FRAME ELEMENTS 0.22 kg 100
105.8

Z 990.00 96.3Marginal distance for foot
C 440/F = 100 mm
Zinc die-cast | incl. 2 M10 threads 20.8
for C 440/F adjustable foot, incl. 96.3
2 × E 111 and E 111/20 hex-star M10
screws, for profiles with 21 x 12
mm lock chamber
0.08 kg

11.7

MOUNTING SET M 1477.37 W 906

FOR FRAME CONNECTION Steel | to connect frame elements
0.04 kg
74 M 1000

M8 M 1477
39

ADJUSTABLE FOOT C 440/F.37 M10 W 906
M 951
M 10, FOR FRAME ELEMENTS Steel | for installation in frame
elements in connection with Z 990
internal corner connector or W 916 Ø 40 80.5
corner connector
0.07 kg

Z 990

C 440/F

CABLE PROTECTION W 996.35

Plastic, light grey | to protect 23.7
cables from damage during
installation W 906
0.01 kg W 996

16.7

51.7

10

PARTS

OCTAwall 40 fabric + panel

LED LONG ARM SPOTLIGHT M 1498.31 12.5
16
12W/230V Aluminium / die-cast, silver-grey | 250
12 W / 230 V, 4000 K, incl. 1 ×
M 1481 retainer, 1 × cable Retainer M 1481
3000 mm, with integrated 535
transformer and screwed on safety 22
glass, for mounting in system
groove 4,3 mm, voltage 100 – 230 V 26
0.61 kg

HOOK TAPE W 840.30 W 840
Hook tape
FOR FRAME ELEMENT Polyamide, white | adhesive,
width 20 mm, thickness ca. 2 mm All frames are pre-
0.7 kg | 50 m W 841 assembled with
Loop tape hook tape!

LOOP TAPE W 841.30 W 840
Hook tape
FOR PANEL Polyamide, white | adhesive,
width 20 mm, thickness ca. 2 mm
0.4 kg | 25 m W 841
Loop tape

SCREWDRIVER M 951.90

HEX-STAR T 30 Plastic / Steel | T 30 hex-star
0.07 kg
97

SPACER W 1000.90

Plastic, red | to secure frames in 51.5
place for safe packaging, storage.
and transportation. Suitable for all 51.5
OCTAwall frame systems.
0.01 kg

2
14

11

PLACING OF LOOP TAPE W 841 TO FRAME 180 Y 180 Y 180 Y 180 Y 180 Y 180 Y 180 8* 8*
180 Y 180 Y 180 Y h1ei8g0ht Y 180 Y 180 Y 180 *= edge d*i=staendcge odfislotaonpcteapofeloop tape
W 841 looWp 8ta4p1eloop tape
height W 841 W 841
backside boaf cpkasnideel of panel 8* panel edgpeanel edge
8*
 55 150
POSITION OF CABLE CUT OUT (ON REQUEST)

C
CC

C = cable cut out

height

X X 180 180 X X CC 150 55
width width C

12 55 150

width

TECHNICAL INFORMATIONEN

OCTAwall 40 fabric + panel

CUTTING DIMENSIONS
Cutting dimensions door panel (fitting for W 455 and W 457) :

panel fill

210 904 28 cut out for lock 2018
20
panel fill

904

Cutting dimensions wall panel: 4 930 4

fabric dimension panel width: outer frame dimensions -5 mm
panel height: outer frame dimensions -5 mm
panel dimension measurement for fabrics: outer frame
22 dimensions

outer frame dimension

13

EXHIBITION SYSTEMS
PROJECT SOLUTIONS
PRESENTATION
INTERIOR DESIGN
CLEANROOM SYSTEMS



OCTANORM® Germany EUROPE AMERICA
Head Office
Raiffeisenstraße 39 OCTANORM® Belgium OCTANORM® Canada
70794 Filderstadt T. +32 2 344 9880 T. +1 905 822 2108
T. +49 711 77003-0 www.octanorm.be www.octanorm.net
F. +49 711 77003-53
[email protected] OCTANORM® France OCTANORM® USA
www.octanorm.com T. +33 1 4695 5406 T. +1 770 7 32 1520
www.octanorm.fr www.octanormusa.com
AW 7970.GB_OCTAWALL 40 FABRIC + PANEL_08/2017
OCTANORM® UK OCTANORM® México
T. +44 20 85 45 2945 T. +52 55 5804 6325
www.octanorm.co.uk www.octanorm.com.mx

OCTANORM® Hellas OCTANORM® Brasil
T. +30 2310 79 6521 T. +55 11 3807 2552
www.octanorm.gr www.octanorm.com.br

OCTANORM® Italia OCTANORM® Argentina
T. +39 02 9645 1966 T. +54 11 43 12 4000
www.formulaotto.it www.octanorm.com.ar

OCTANORM® Nederland AFRICA
T. +31 50 309 5133
www.octanorm.nl OCTANORM® South Africa
T. +27 11 433 2010
OCTANORM® Polska www.octanorm.co.za
T. +48 22 773 0350
www.octanorm.pl MIDDLE EAST

OCTANORM® Adria OCTANORM® Emirates
T. +386 590 56301 T. +971 4 340 6888
www.octanormadria.com www.octanormemirates.net

OCTANORM® Espana AUSTRALIA
T. +34 930 019 424
www.octanorm.es OCTANORM® Australia
T. +61 3 8773 8550
OCTANORM® Nordic www.octanorm.com.au
T. +46 8 621 6500
www.octanorm.se ASIA

OCTANORM® Russia OCTANORM® Japan
T. +7 495 565 7920 T. +81 45 511 8144
www.octanorm.ru www.octanorm.jp

OCTANORM® China
T. +86 512 6283 3336
www.octanorm.cn