Product summary

An ISO 2015 : 9001 Certified Company

CONCRETE ADMIXTURES

“Our business is to make structures • Optimization of cement content -
last longer, look better and live safer, cost savings
thereby Adding Value to your • Suitable for bottom layer of paver
Construction” blocks and concrete blocks

Starting with a single product by a Builders / Contractors /
handful of employees in an unaware Developers / Concrete works.
market Cera-Chem Private Limited
has today grown into a market leader Dosage: %1.2 - %0.3 by weight of
in South India and slowly extending cement
our wings to other parts of the
Country. With single-minded PLASTICISERS Packing: 250 & 120 ,60 ,12 ,6 ,1
determination to provide the very best CERAPLAST 200 Concrete plasticiser
quality and service, Cera-Chem which reduces the amount of gauging CERAPLAST 400 High performance,
Private Limited has grown in size, water required and increases the low dosage superplasticiser based on
scope and expertise that would surely workability, density and strength with Melamine Formaldehyde Sulphonate
surpass in the wildest of imagination. the same cement content. (MFS). Highly recommended for
• Dense concrete increased early strength of concrete,
Cera-Chem Private Limited is an ISO • Increased workability which is a must in precast and
2015 : 9001 certified company, • No increase in cement content for pre-stressed concrete industries.
manufacturing construction chemical increased strength • Increased 28 day strength
products, prominent in the industry • Enhancement in ultimate strength • Improved water tightness
for nearly three decades. The range of and density • Early removal of formwork
product comprises of almost every • Reduction in water by %12- 10 • Considerable high early strength
conceivable high performance • Improves dispersion and sheen of
chemical requirement of the pigment
construction industry. Our consice • Excellent flow & workability
product profile covers Concrete • Substantial reduction in
Admixtures, Waterproofing System, water-cement ratio ranging from
Industrial Grouts, Anti-Corrosive 12 - 25%
Coatings, Protective/Decorative • High quality concrete of lower
Coatings, Concrete Repair Products permeability and improved durability
including all range of Carbon Fibre
Reinforced Polymer System, Industrial Builders / Contractors / Builders / Contractors / Developers /
Flooring, Concrete Surface Treatment, Developers / Concrete works. Concrete works / Tile and Paver.
Tile Adhesives, Joint Fillers, Joint
Sealers, range of Epoxy Flooring Dosage: %1 - %0.2 by weight of Dosage: %1.5 - %0.2 by weight of
System, Marble Renewal Products, cement cement
Ready-To-Use acoustic and heat
Resistant Mortar and cleaning Packing: 250 & 120 ,60 ,12 ,6 ,1 Packing: 250 & 120 ,60 ,12 ,6 ,1
Products.
SUPER PLASTICISERS EXCLUSIVE FOR BLOCK INDUSTRY

CERAPLAST 300 High-grade CERAPLAST BS Modified
superplasticiser based on Naphthalene, superplasticiser based on
highly recommended for increased Naphthalene, highly recommended
workability and high early and for increased strength and better
ultimate strength of concrete. dimensional stability of concrete
• Improved water tightness blocks.
• Early removal of formwork • Early removal of mould
• Increased ultimate strength • Improved water tightness
• High early strength • Reduction in water-cement ratio
• Reduction in water-cement ratio by • No cracks and corner breakages in
12 - 25% blocks
• Optimization of cement content -
cost savings

CONCRETE ADMIXTURES

• Considerably high early strength • The plasticizing action of CERA Dosage: %1.8 - %0.4 by weight of cement
and ultimate strength PLAST CT 20 helps in complete
• High quality concrete of lower hydration of cement there by Packing:60 ,50 ,25 ,20 ,12 ,10 ,6 ,5 ,1
permeability and improved achieving superior strength. It can be & 100, 120, 200 & 250
durability used in both dry and wet processes
and for precasting elements CERAPLAST 300 – RS (G) MID PC High
Dosage: %1.2 - %0.3 by weight of performance modified polycarboxylate
cement Paver Industry based super plasticizer cum retarder
with a combination of water reducing
Packing: 250 & 120 ,60 ,12 ,6 ,1 Dosage: %0.4 - %0.2 by weight of resins ideally suited for ready mixed
cement concrete industries.
CERAPLAST 400 Q.P&B High Packing: 60 ,50 ,25 ,20 ,12 ,6,10 ,5 ,1, • Reduction in water-cement ratio in
performance, low dosage, accelerating 100, 120, 200 & 250 the order of 25 - 20 %
superplasticizer based on Melamine • Flowing, pumpable concrete
Formaldehyde Sulphonate (MFS) and is HIGH RANGE • Excellent workability and
highly recommended for increased WATER REDUCERS workability retention even in extreme
early strength of concrete, which is a temperatures
must for precast and pre-stressed CERA HYPERPLAST XR-W40 • Does away with the separate use of
concrete and for paving tile industries. Polycarboxylate ether based new range superplasticiser and retarder
• Substantial reduction in water reducing admixture. • High quality concrete of improved
water-cement ratio • Retains slump for extended periods durability, reduces heat of hydration
• Considerable high-early strength of time even with very high strength cements
• Increased -28day strength • Helps in the production of self- • Compatible with mineral admixtures
• Accelerates cement hydration compacting concretes and all types of cements
considerably due to which concrete • Improves pumpability at low water- • Waterproofing effect by drastic
segments can be demoulded within cement ratios and low cement reduction in permeability of concrete
8 - 6 hours contents
• Excellent pigment dispersion - • Excellent flow & workability Roads & bridges / Airports / Port /
Improves colour brightness • Achieves a higher slump than PWD / CPWD / MES / Dam / Metro /
• Improved water tightness normal superplasticiser RMC / High rise building / Precast /
• High quality concrete of lower • Lower dosages as compared to Self-compaction concrete / All
permeability and improved durability normal superplasticiser concrete works
• Aids in cement savings, higher early
Paver Industry and ultimate strength Dosage: %1.8 - %0.4 by weight of
cement
Dosage: %1.5 - %0.2 by weight of Roads & bridges / Airports / Port /
cement PWD / CPWD / MES / Dam / Metro / Packing: 100 ,60 ,50 ,20 ,12 ,10 ,6 ,1,
RMC / High rise building / Precast / 120, 240 & 250
Packing: 250 & 120 ,60 ,12 ,6 ,1 Self compaction concrete / All
concrete works
CERAPLAST CT 20 Accelerating
admixture for concrete and mortar.
• Excellent reduction in water
permeability
• Excellent plasticizer with
workability
• Provides high early and ultimate
strength
• Accelerates the setting time of
mortar/concrete
• Rebound losses in plastering mortar
and guniting are minimized

CONCRETE ADMIXTURES

CORROSION INHIBITORS • Easy to use • Ideal for cold weather concreting
• Substantial reduction in • Accelerates the setting time of
CERAPLAST CI 100 Specially water-cement ratio concrete
formulated admixture based on • Imparts high degree of corrosion • High early strength in concrete
Bipolar technology recommended for resistance to concrete • Normal working at low temperature
use in concrete requiring corrosion • Compatible with other admixtures • An alternative to high Alumina
inhibiting properties. • No adverse effect on workability and Cement in Precast Works
• Easy to use strength Dosage: %1 - %0.2 by weight of
• Imparts high degree of corrosion • Can be used as an admixture to cement
resistance to concrete replace sulphate resisting cement
• Compatible with other admixtures Packing: 250 & 120 ,60 ,25 ,12 ,10 ,6 ,1
• No adverse effect on workability and Roads & bridges / Airports / Port /
strength PWD / CPWD / MES / Dam / Metro / RETARDER
• Can be used as an admixture to RMC / High rise building / All CERA RETARDER Polymer based
replace Sulphate resisting cement concrete works where corrosion is admixture for effecting controlled
high retardation in setting of concrete.
Roads & bridges / Airports / Port / Slows down the setting of concrete in;
PWD / CPWD / MES / Dam / Metro / Dosage: %0.8 - %0.3 by weight of • Ready mix concrete
RMC / High rise building / All cement • Long delivery hauls
concrete works where corrosion is • High ambient temperature
high Packing: 250 & 120 ,60 ,12 ,6 ,5 ,1 • Large pours - to prevent 'cold joints'
Dosage: %1 - %0.2 by weight of • Delays between mixing and final
cement LUBRICATING compaction
Packing: 250 & 120 ,60 ,25 ,12 ,6 ,1 ADMIXTURE
CORROSION INHIBITOR CUM RMC & Projects
CERALUBE PH & P Specially
SUPER PLASTICIZER formulated product consisting of Dosage: %0.4 by weight of cement.
CERA CONCRETE TONIC 350 Specially inorganic lubricating additive which is Can be increased based on trails
formulated superplasticizer along with used for lubrication of concrete
corrosion inhibiting properties that pumps, hoses and pipeline prior to Packing: 250 & 120 ,60 ,12 ,6 ,1
works on the Bi-polar technology. concreting works.
• Reduces blockages RETARDING
• Environment friendly SUPER PLASTICISER
• Easy to use and economical
• Ensures easy pumpability due to the CERAPLAST 300 - RS(G) is a high
greasing effect performance modified naphthalene
sulphonate based super plasticiser cum
RMC & Project retarder with a combination of water
reducing resins ideally suited for
Dosage: 1 ltr in 50 ltr water ready mixed concrete industries.
• Flowing, pumpable concrete
Packing: 10 • Compatible with mineral admixtures
• Excellent workability and retention
ACCELERATOR even in extreme temperatures
CERAPLAST ACL High performance • Reduction in water-cement ratio in
accelerating admixture for use with the order of 25 - 20 %
every type of Portland cement. • Does away with the separate use in
CERAPLAST ACL reduces the setting superplasticiser and retarder
and hardening time of concrete and • Waterproofing effect by drastic
also increases the compressive reduction in permeability of concrete
strength at 7days.
• Compatible with all type of Portland
cement

CONCRETE ADMIXTURES

• High quality concrete of improved CERAPROOF IWP - LIQUID Liquid • Arrests hairline cracks
durability, reduces heat of hydration waterproofing admixture, which can be • Compatible with all types of
even with very high content cement used in concrete and cement mortar. cements
It reduces the water demand and also • High performance integral
Roads & bridges / Airports / Port / improves the impermeability of crystalline admixture
PWD / CPWD / MES / Dam / Metro / concrete. • Makes concrete permanently
RMC / High rise building / Precast / • Instant dispersion waterproof & breathable
Self compaction concrete / All • Excellent reduction in permeability • Resists extreme hydrostatic pressure
concrete works • Improved workability from positive and negative sides of
Dosage: %1.5 - %0.5 by weight of • Produces dense and homogenous concrete
cement concrete • Becomes an integral part of concrete
Packing: 250 & 120 ,60 ,12 ,6 ,1 • No significant effect in the setting making the concrete dense & durable
time of mortar/concrete • Non-toxic and resistant to
INTEGRAL aggressive chemicals
WATERPROOFING Dosage: %1.5 - %0.4 by weight of
cement Dosage: %0.8 by weight of cement
PRODUCTS
CERAPROOF IWP-POWDER Mineral Packing: 120 ,60 ,25 ,12 ,6 ,5 ,1 ,0.250 Packing: 20 & 10
waterproofing admixture for mortar & 250
and concrete in powder form. POLYMER
• Reduces permeability and water CERAPLAST LMP Liquid mortar CEMENT MODIFIERS
absorption of concrete, mortar plasticiser
without causing strength reduction • Increased adhesion CERA MICROSEAL Specially
• No effect on setting time of • No segregation or bleeding formulated co-polymer based integral
concrete/mortar • Improves the quality of mortar waterproofing compound for cement
It can be used as a waterproofing • Less prone to drying shrinkage mortar and concrete, which will
admixture in cement-sand mortar for cracks reduce the water demand and improve
external and internal plastering of • Mortar does not stiffen prematurely impermeability.
underground structures, tanks, but remains plastic • Excellent water resistance
masonry, screed, etc.,. Recommended to make the cement • Reduces shrinkage cracks in joints
Dosage: 1 kg per 50 kg bag of cement mortar smooth and workable, thus and plaster
Packing: 25 & 1 overcoming workmanship defects. • Does not adversely affect the setting
time of cement
Dosage: %0.4 - %0.2 by weight of • Reduces permeability of concrete
cement and mortar without reduction in
strength
Packing: 250 & 120 ,60 ,12 ,6 ,1 • Reduces water requirement of
concrete and mortar mixes for
CRYSTALLINE required workability
ADMIXTURE • Improves bond strength of mortar to
porous substrates like brick / old
CERA CRYSTALLINE INTEGRAL concrete
Crystalline capillary admixture
consisting of selected blend of Dosage: %1 by weight of cement
Portland cements, special quartz and
proprietary chemicals. The active Packing: 0.500
chemicals in CERA CRYSTALLINE
INTEGRAL reacts with the by-products CERA WONDER MIX Rare performance
of cement hydration in wet concrete modifier for use with cement mortar
and causes catalytic reaction and which imparts exceptional and highly
generating non-soluble crystals which desirable properties to the cement
fills, binds the pores and capillaries in mortar mix enabling high quality
the concrete. finish.

CONCRETE ADMIXTURES

CORROSION INHIBITORS • Easy to use • Ideal for cold weather concreting
• Substantial reduction in • Accelerates the setting time of
CERAPLAST CI 100 Specially water-cement ratio concrete
formulated admixture based on • Imparts high degree of corrosion • High early strength in concrete
Bipolar technology recommended for resistance to concrete • Normal working at low temperature
use in concrete requiring corrosion • Compatible with other admixtures • An alternative to high Alumina
inhibiting properties. • No adverse effect on workability and Cement in Precast Works
• Easy to use strength Dosage: %1 - %0.2 by weight of
• Imparts high degree of corrosion • Can be used as an admixture to cement
resistance to concrete replace sulphate resisting cement
• Compatible with other admixtures Packing: 250 & 120 ,60 ,25 ,12 ,10 ,6 ,1
• No adverse effect on workability and Roads & bridges / Airports / Port /
strength PWD / CPWD / MES / Dam / Metro / RETARDER
• Can be used as an admixture to RMC / High rise building / All CERA RETARDER Polymer based
replace Sulphate resisting cement concrete works where corrosion is admixture for effecting controlled
high retardation in setting of concrete.
Roads & bridges / Airports / Port / Slows down the setting of concrete in;
PWD / CPWD / MES / Dam / Metro / Dosage: %0.8 - %0.3 by weight of • Ready mix concrete
RMC / High rise building / All cement • Long delivery hauls
concrete works where corrosion is • High ambient temperature
high Packing: 250 & 120 ,60 ,12 ,6 ,5 ,1 • Large pours - to prevent 'cold joints'
Dosage: %1 - %0.2 by weight of • Delays between mixing and final
cement LUBRICATING compaction
Packing: 250 & 120 ,60 ,25 ,12 ,6 ,1 ADMIXTURE
CORROSION INHIBITOR CUM RMC & Projects
CERALUBE PH & P Specially
SUPER PLASTICIZER formulated product consisting of Dosage: %0.4 by weight of cement.
CERA CONCRETE TONIC 350 Specially inorganic lubricating additive which is Can be increased based on trails
formulated superplasticizer along with used for lubrication of concrete
corrosion inhibiting properties that pumps, hoses and pipeline prior to Packing: 250 & 120 ,60 ,12 ,6 ,1
works on the Bi-polar technology. concreting works.
• Reduces blockages RETARDING
• Environment friendly SUPER PLASTICISER
• Easy to use and economical
• Ensures easy pumpability due to the CERAPLAST 300 - RS(G) is a high
greasing effect performance modified naphthalene
sulphonate based super plasticiser cum
RMC & Project retarder with a combination of water
reducing resins ideally suited for
Dosage: 1 ltr in 50 ltr water ready mixed concrete industries.
• Flowing, pumpable concrete
Packing: 10 • Compatible with mineral admixtures
• Excellent workability and retention
ACCELERATOR even in extreme temperatures
CERAPLAST ACL High performance • Reduction in water-cement ratio in
accelerating admixture for use with the order of 25 - 20 %
every type of Portland cement. • Does away with the separate use in
CERAPLAST ACL reduces the setting superplasticiser and retarder
and hardening time of concrete and • Waterproofing effect by drastic
also increases the compressive reduction in permeability of concrete
strength at 7days.
• Compatible with all type of Portland
cement

WATERPROOFING SYSTEMS

• Faster turn around, cost effective PLUGGING COMPOUND • Resistant to abrasion
• Allows cement content to be CERA PLUG Ready to use, highly • Enhances bridging effect against
reduced consistent, quick setting water leak post construction hairline cracks
• Less prone to drying shrinkage plugging compound. • Ideal waterproofing system for new
cracks • Easy to use single component building as well as repair of old
• Hacking on ceiling before plastering material structures
can be avoided • Excellent adhesion to the substrate
• Mortar does not stiffen prematurely • Quick stoppage of water leakage Coverage: 24 Kg unit - Approx. 30
but remains plastic • Thermal cracking is less as it has low Sqm per coat on normal surface
• Reduces rebound lose exothermic reaction
• Superior finish • Chloride free Packing: 24 & 7 ,6 ,3.5
• Increased adhesion Coverage: NA
• No segregation or bleeding Packing: 10 & 5 ,1 CERALASTIC CLASSIC 2K Elastomeric
fiber reinforced waterproofing system
Dosage: %1 by weight of cement 2K ELASTOMERIC based on high performance acrylic
WATERPROOF co-polymer which is part A liquid
Packing: 1 & 0.500 COATINGS compound and unique blend of
cement mixed with well-graded
SET ACCELERATING CERALASTIC 2K elastomeric aggregates, designed with particle
AND GUNITING AID waterproofing material based on engineering to the best which is part
CERA GUNITE RAPID SET Chloride special synthetic resin dispersion and B, combined to deliver flexible crack
free ready to use accelerator and a blend of selected cements mixed bridging waterproof coating.
waterproofing agent in powder form with well-graded aggregates and high • Easy to use
for addition to gunite mixes, and it is performance acrylic co-polymers. • Resistant to abrasion
suitable for all sprayed concrete and • Excellent resistance to water • Excellent resistance to water
shotcreting operations. • Non toxic, suitable for potable water • Resistance to freezing and thawing
• Improves water tightness applications • Excellent adhesion to porous and
• Accelerates strength development • Excellent adhesion to porous and non-porous surface concrete/
• Allows shotcreting at low non-porous concrete /masonry masonry etc
temperatures surface • Protects the concrete / RCC terrace
• Provides high early and ultimate • Protects the concrete from water, from water, carbonation and
strength carbonation and de-ionizing salts de-ionizing salts
• Does not corrode the reinforcement • Good flexibility and elongation can • Considerably flexible and the
as it is chloride free accommodate linear thermal elongation can accommodate linear
• Reduces rebound losses and hence expansion of surface thermal expansion of the substrate
reduces cost of guniting • Non-toxic, suitable for potable
• Better adhesion to areas of slight water applications
seepage and dampness • Enhances bridging effect against
• Allows multiple layers in single post construction hairline cracks
operation and hence thick layers can • Ideal waterproofing system for new
be placed building
• Accelerates the hardening process,
the concrete hardens within minutes Coverage: 30 Kg unit - Approx. 40 -35
after jetting Sqm per coat on normal surface

Dosage: %6 - 1 by weight of cement Packing: 30 & 15 ,3

Packing: 50 CERALASTIC RTU 2K ready to use
elastomeric, highly flexible
waterproofing system based on special
synthetic resin dispersion and a blend
of selected cements mixed with
well-graded aggregate sand and high
performance modified acrylic
co-polymers.

WATERPROOFING SYSTEMS

• Excellent resistance to water ingress Coverage: 24 Kg unit - Approx. 30 • Enhances crack bridging properties
• Non-toxic, suitable for portable Sqm per coat on normal surface against post construction hairline
water applications cracks
• Excellent brush ability with Packing: 24
application smoothness CERA ELASTOCRETE Acrylic based Coverage: 1.25 kg / Sqm for 1 mm
• Enhances bridging effect against polymer system which can be used as thickness.
post construction hairline cracks an additive to cement composites in Packing: 25
• Protects the concrete from water, waterproofing and structural repair
carbonation and de-ionizing salts applications. It also imparts durability 1K ACRYLIC
• Flexibility and elongation can to the structure and improved WATERPROOFING PRODUCT
considerably accommodate linear aesthetics to the exterior finishes.
thermal expansion of the substrate • High chemical resistance CERA FLEX Acrylic based highly
• Low VOC content; environmental • Allows the substrate to breathe flexible coating suitable as a
friendly • Increased water impermeability waterproofing and protective system
• Excellent adhesion to porous and • Enhanced flexural and tensile for concrete and other structures.
non-porous concrete /masonry and strengths • Weatherproof protective coating
wooden substrates • Excellent adhesion to concrete and • Excellent thermal insulation
• Excellent underlayment for tiling steel • Resistant to ultra violet radiation
applications • Anti-carbonation and chemical
Coverage: A mix of 20 Kg of cement : resistant coating
Coverage: 7 kg unit covers 6.5 to 7 20 Kg CERA ELASTOCRETE covers an • Easy to use, single component and
Sqm per coat on normal surface area of 45 - 40 Sqm for two coats. bio-friendly material
• Can be used on a variety of
Packing: 7 Packing: 250 & 100 ,50 ,10 substrates such as concrete, asbestos,
cement, zinc and GI sheets, timber &
CERA FIBROLASTIC 2K Fibre enriched CERA FIBROFLEX Unique single tlight weight concrete
hydrate type flexible waterproofing component waterproofing system • High elasticity and tensile strength
material based on a special synthetic supplied in powder form, produced by enables it to accommodate roof
resin dispersion and a blend of blending selected acrylic co-polymers movement
selected cements mixed with well and different grades of treated fibers
graded sand and high performance that react with cement and other Coverage: 1.5 to 2 Sqm / kg / 2 coats.
synthetic fibres. binders in the presence of water to Packing: 20 & 10 ,4 ,1
• Excellent resistance to water produce homogeneous glue like slurry.
• Excellent adhesion to concrete CERA FIBROFLEX possesses excellent
• Resistance to freezing and thawing waterproofing & crack bridging
• Excellent adhesion to porous and properties and has good adhesion to
non-porous concrete /masonry all cementitious surfaces.
surface • Non-toxic
• Protects the concrete from water, • Excellent resistance to water
carbonation and de-ionizing salts • Excellent adhesion to porous and
• Good flexibility and elongation can non porous surfaces
accommodate linear thermal • Protects the concrete from
expansion of surface carbonation and de-ionizing salts
• Non-toxic, suitable for portable • Considerable flexibility and
water applications elongation can accommodate linear
• Enhances bridging effect against thermal expansion of surface
post construction hairline cracks • Ideal waterproofing system for new
• Ideal waterproofing system for new buildings as well as repair of old
building as well as repair of old structures
structures

WATERPROOFING SYSTEMS

1K PU AQUEOUS Coverage: 1 - 0.75 Sqm / kg / coat for • Protects the concrete from water,
WATERPROOFING 1mm carbonation and de-ionizing salts
• Ideal water proofing system for new
CERA HYDRO PRIMER FA High Packing: 20 & 10 ,4 ,1 building as well as repair of old
performance polyurethane resin based structures
primer having very high penetration CERA HYDROLASTIC WP 555 Single
with cement substrates and has high component waterborne liquid applied Coverage: 0.75 - 0.5 Sqm / kg / coat
adhesion to all waterborne high flexible hybrid acrylic dispersion for 1 mm
waterproofing systems. based waterproofing membrane.
• Easy to use • Ease of application Packing: 20 & 10 ,4 ,1
• Improves coverage of the coating • Resistant to abrasion
• Excellent adhesion for polyurethane • Highly elastic in nature CERA HYDROLASTIC PUD - WP
waterproofing system • Excellent weather resistant Premium single component liquid
• Penetrates deep inside the surface • Excellent root resistant properties applied polyurethane dispersion based
and forms 40 – 30 microns film • Excellent tolerance to moisturous waterproofing membrane.
thickness making the surface ideal for surface • Very high elasticity
receiving all waterborne • Excellent adhesion to porous and • Easy to apply
waterproofing systems non-porous multi substrates • Good abrasion resistance
• Protects the concrete from water, • Good weather resistance
Coverage: 8 - 7 Sqm / kg / coat carbonation and de-ionizing salts • Excellent adhesion properties
• Enhances crack bridging effect • Flexibility and elongation can
Packing: 20 & 10 ,6 ,1 against post construction hairline accomodate linear thermal expansion
cracks of surface
CERA HYDROLASTIC MV 444 • Flexibility and elongation can • Excellent crack bridging properties
Polyurethane modified acrylic accommodate linear thermal • Best for new building as well as
dispersion based, cold-applied, single expansion of surface repairing old structures
component waterborne liquid applied • Ideal waterproofing system for new
waterproofing membrane. building as well as repair of old Coverage: 0.75 - 0.5 Sqm / kg / coat
• Resistant to abrasion structures for 1 mm
• Ease of application • Aids in cement savings, higher early
• Excellent weather resistant and ultimate strength Packing: 20 & 10 ,4 ,1
• Excellent anti-root properties
• Excellent adhesion to porous and Coverage: 0.75 - 0.6 Sqm / kg / coat CERA HYDROLASTIC WP PRIMER High
non-porous multi substrates for 1 mm performance polyurethane resin based
• Protects the concrete from water, primer having good penetrating
carbonation and de-ionizing salts Packing: 20 & 10 ,4 ,1 properties for concrete surfaces.
• Enhances crack-bridging effect • Improves coverage of the coating
against post construction hairline CERA HYDROLASTIC WP 666 Single • Excellent adhesion for polyurethane
cracks component waterborne liquid applied floor toppings
• Flexibility and elongation can hybrid acrylic dispersion based • Suitable for all waterborne
accommodate linear thermal protective top coat membrane with UV waterproof coatings
expansion of surface resistance. • Penetrates deep inside the surface
• Ideal waterproofing system for new • Ease of application and forms 40 – 30 microns film
building as well as repair of old • Resistant to abrasion thickness making the surface ideal for
structures • Highly UV resistant receiving acrylic and PU coating
• Excellent weather resistant • Easy to use
• Excellent root resistant properties
• Excellent tolerance to moisturous Coverage: 8 - 7 Sqm / kg / coat
surface
• Excellent adhesion to porous and Packing: 11 & 5 ,1
non-porous multi substrates

WATERPROOFING SYSTEMS

CRYSTALLINE SYSTEM • Adjusts to thermal stresses SBS RUBBER MODIFIED
• Excellent flexibility and workability
CERA CRYSTALLINE CRETE Crystalline • Free of solvents and non CERA FLEXICOTE Single component,
waterproofing system consists of inflammable SBS rubber modified, waterproof
specific blend of penetrative swellable • Excellent adhesion to various coating with good elasticity and water
salt, cementitious binders and substrates resistance. It is durable, flexible and
chemical additives. The active • Resistance to acids as well as other has a high level of resistance to
chemicals penetrate concrete and deleterious substances weathering agents like UV rays,
react chemically with free lime to • Continuous flexible film without sunlight, rainfall, etc.
produce insoluble crystals in the cracks or pinholes when applied • Weatherproof protective coating
presence of moisture. according to directions • Excellent thermal insulation
• Easy to apply • Good adhesion to substrate
• No chloride content Coverage: 2 to 2.5 Sqm / kg / 2 coats • High elasticity and tensile strength
• Compatible with potable water • Excellent resistance to weathering
• Suitable for external and internal Packing: 50 & 20 ,1 agents
applications • Breathable – water vapour can
• High penetration in concrete and APP MEMBRANE escape from the structure
effectively seals capillary tracts CERA WP SHIELD APP modified Primer: CERA FLEXICOTE PRIMER
• Highly resistant to chemical attack polyester reinforced, torch applied
of sewage and industrial wastes waterproofing membranes Coverage: 1 sqm / kg / coat for 1.2
• High adhesion to the substrate mm
Coverage: 1.5 - 1 kg / Sqm for 2 coats • Excellent tensile strength,
elongation and superior lap joint Packing: 20
Packing: 20 strength
• Resistance to weathering NEOPRENE BASED
It is ideal for a wide range of COATING
waterproofing application, including
roofs, reservoir, basement, tunnels CERA ROOF COTE Neoprene based
and car parks. It can be utilized in waterproofing membrane.
exposed and covered application. • Protects concrete and other building
materials against aggressive
Coverage: NA environment
• Bridges hairline cracks
Packing: 10 x 1 m / Roll • Resistant to UV rays
• Built in flexibility
Recommended for waterproofing of
underground structures, area between
concrete floors, terraces, seawalls, for
application on cement concrete,
bricks, tiles, asbestos metals, PVC,
timber, etc.

MODIFIED BITUMEN Coverage: 5 Sqm / kg / coat
BASED COATING Packing: 20 & 10 ,4 ,1

CERA BITOPLAST Solvent-free,
flexible, thick film coating based on
synthetic rubber bitumen emulsion
with Polymers & Plasticiser in pasty
consistency. It forms a watertight and
high elastic membrane when applied.

WATERPROOFING SYSTEMS

PU BITUMEN MODIFIED CERA BITOLASTIC WP 111 Single Coverage: 10 kg will cover 40 Sqft
component; elastomeric, aliphatic bathroom floor area
CERA ROOFCOTE 2 1500K highly bitumen modified polyurethane based Packing: 10 ,5
elastomeric polyurethane based cold liquid applied, high build,
waterproof membrane. waterproof coating system. It cures to SPECIAL NOTE
• Good adhesion to substrate with form an elastic, seamless, waterproof Toilet / bathroom and all wet area
elongation up to 400 % coating with good crack-bridging waterproofing without removel of
• Highly elastomeric flexible properties. Its performance is tiles and wall grouting to stop
membrane based on polyurethane maintained even at low temperatures. capillary rise of water
specially formulated to suit all types • Elastomeric – cures with aerial
of waterproofing situations moisture to a flexible and rubbery POLYUREA BLEND
• Can be used as a sandwich coating CERA SUPERCOAT POLY UR Fast set,
membrane with non-woven fabrics • Ready to use single component premium, two component coating/
It is recommended for waterproofing • Excellent weather and UV resistant elastomer derived from a blend of
underground structures, area between • Excellent adhesion to porous and hybrid Polyurea and Polyurethane
concrete floors, terraces, balconies, non-porous substrates designed for diverse applications such
pools, plaza decks, culverts, seawalls, • Excellent anti root properties when as waterproofing and sports flooring.
etc., used in combination with Geo textile • Fast reactivity and cure; Low down
reinforcement membrane time
Coverage: 1 - 0.75 Sqm / kg / coat • Protects the concrete from water, • Seamless coating and lining,
carbonation and de-ionizing salts maintains flexibility
Packing: 20& 10 ,4 ,1 • Resistant to abrasion, to mild acids • High impact & abrasion resistance
and chemicals and industrial • Excellent tensile and structural
CERA ROOFCOTE SPU 1500 Single environment strength, high elongation at break
component highly elastomeric flexible • Enhances crack-bridging effect • Very good adhesion to concrete,
membrane based on polyurethane, against post construction hairline steel, asphalt, etc.
specially formulated to suit all types cracks • Excellent elastomeric property and
of waterproofing application. • Ease of application cushioning effect
• Easy to apply • Good water impermeability
• It can be over coated with Coverage: 1 - 0.75 Sqm / kg / coat Primer: CERA SUPERCOAT POLY UR
aluminium paint PRIMER
• Good adhesion to substrate with Packing: 20 & 10 ,4 ,1 Coverage: 5 - 4 Sqm / kg / coat for 200
elongation up to 600 % microns
• Liquid built up system providing ONE OF ITS KIND NANO Packing: 6 & 1
joint free seamless membrane GRAVITY GROUT FOR CERA AQUASTAD UR Single
• It can be applied to vertical surfaces POND WATERPROOFING component, hybrid, superior,
such as roof flashings and walls elastomeric coating, derived from a
• Mechanical damage can be easily CERA AQUA FIX GG 2K, silane blend of hybrid Polyurethane and
identified and repaired modified, water based polyurethane Polyurea designed for diverse
• UV stable and does not harden or acrylic hybrid resin system used for
become brittle pond waterproofing system that has
• It can be used as a sandwich nano gravity water proofer.
membrane with non-woven fabrics • Super penetration properties
• Testified capacity to strengthen any
Coverage: 0.75 - 0.5 Sqm / kg / coat cement system
for 1.5 mm • Makes concrete dense and
impermeable
Packing: 20 & 10 ,4 ,1 • Can penetrate deep down the path
due to nano gravity water proofer
• An absolute breathable system
• Excess mixed material can be reused
within 30 days

WATERPROOFING INDUSTRIAL GROUTS
SYSTEMS
PRE-PACKED • Densification of material decreases
waterproofing applications and floor CEMENTITIOUS GROUTS permeability, increases wear
coatings. resistance
• Good water impermeability CERA GROUT 40 High strength
• Has anti-root property non-shrink, free flow, pourable / Yield: 2400 kg / Cum
• Seamless coating and lining, pumpable grout for industrial
maintains flexibility applications. Premixed, selectively Packing: 25
• Excellent elastomeric property graded components result in a dense,
• High impact & abrasion resistance homogenous mix, with excellent CERA GROUT 100 Ultra-high strength,
• Excellent tensile and flexural strength and dimensional stability. non-shrink, free flowing, polymer
strength, high elongation • No efflorescence enhanced, pourable / pumpable grout
• Very good adhesion to concrete, • One-step grout, ready to use for industrial applications with design
steel, asphalt, etc. • No bleeding / segregation strength of M100. Premixed, special
Primer: CERA AQUASTAD UR PRIMER • Resistant to oils, chemicals, etc., polymers, additives and selected
• Excellent fluidity for easy fillers with well graded aggregates
Coverage: 5 - 4 Sqm / kg / coat for 200 placements result in a dense, homogenous mix
microns • Accessibility to remote parts of with excellent strength and
structure dimensional stability.
Packing: 20 & 6 kg • High early strength and uniform set, • Excellent fluidity for easy
minimizes downtime for repairs and placements
WATERPROOF PAINT maintenance, allows earlier loading • Accessibility to remote parts of
• Dimensionally stable, needs no structure
CERA RAIN GUARD High performance special treatment at open ends, • One-step grout, Ready to use
waterproof coating for interior / capping or edges • High early strength and uniform set,
exterior walls and ceiling for long • Densification of material decreases minimizes downtime for repairs and
lasting aesthetic beauty. permeability, increases wear maintenance, allows earlier loading
• Earlier rain resistant resistance • Dimensionally stable, needs no
• Excellent tensile strength & • Excellent non-shrink property special treatment at open ends,
elongation capping or edges
• Superior weather resistant Yield: 2200 kg / Cum • No bleeding / segregation
• Excellent ponding water resistant • Densification of material decreases
• Excellent crack bridging property Packing: 50 & 40 ,25 permeability, increases wear
• Excellent dirt pickup property resistance
• Excellent water proofing tool for CERA GROUT 40 G Very high early • Resistant to oils, chemicals, etc.,
rainy season strength, non-shrink, free flow grout • No efflorescence
• Easy to apply for industrial applications. Premixed,
selectively graded components result Yield: 2400 kg / Cum
Coverage: 2.5 Sqm / kg / 2 coats in a dense, homogenous mix, with
excellent strength and dimensional Packing: 25
Packing: 50 & 20 ,4 ,1 stability.
• No efflorescence CERA SUPER GROUT MS 100 High
• One-step grout, ready to use strength, non-shrink, cementitious
• No bleeding / segregation metallic grout for grouting
• Resistant to oils, chemicals, etc., applications. Premixed, selectively
• Excellent fluidity for easy graded components and corrosion
placements and accessibility to resistant aggregates result in a dense,
remote parts of the structure homogenous mix with excellent
• Earlier strength development and strength and dimensional stability.
uniform set, allows earlier loading • Excellent fluidity for easy
• Dimensionally stable, needs no placements
special treatment at open ends, • Accessibility to remote parts of
capping or edges structure
• Can be pumped / poured
• No bleeding / segregation

INDUSTRIAL GROUT

• Dimensionally stable, needs no CERA GROUT PG 350 Ready to use, gaps from 0.25 mm to 120 mm
special treatment at open ends, single component, non-metallic, because of its very low viscous nature.
capping or edges non-shrink, cementitious expanding
• Earlier strength development and grout used for injection grouting and Yield: 2000 kg / Cum
uniform set, allows earlier loading other applications.
• High early strength, minimizes • Non–toxic Packing: 12
downtime for repairs and • Non–metallic CERA SCREED EPLV INJECTABLE 2K
maintenance • Dimensional stability High performance, low viscous,
• No plastic settlement non-shrink epoxy grout.
Yield: 2400 kg / Cum • Permanent expansion • Injectable, free flowing, self leveling
• Low water requirements and non-shrink
Packing: 25 • Easy to use, ready to mix • Pourable and injectable
• Addition of only water required • Helps in rapid installation and gains
CERA RAPID GROUT Rapid setting high • Reduced creep and no shrinkage high compressive, flexural and tensile
early strength grout for pothole and • Resistant to impact and vibration strength
concrete and Bitumen road repairs. • Resistant to frost and fire damage It is recommended for strengthening
• Compatible with asphalt and • High compressive and bond strength the existing concrete elements like
concrete roads • Initial expansion due to gaseous columns, beams, foundation members
• Can be opened to traffic within 3 to expansion etc. It is used for filling very small
4 hours • Suitable in any consistency - earth gaps from 0.25 mm to 120 mm
dry to free flow because of its very low viscous nature.
Yield: 1950 kg / Cum
Yield: Yield: 1200 kg / Cum
Packing: 25 Flowable grout – Upto 750 Kg per Cum
Plastic grout mix – Upto 800 Kg per Cum Packing: 2 & 1
• Achieves 50 % of the strength within
4 hours. It is compatible for use with Packing: 25 CERA GROUT EPLV 100 INJECTABLE
asphalt and concrete roads for High performance, ultra low viscous,
emergency repairs of potholes on EPOXY RESIN GROUTS non-shrink epoxy grout.
highways with heavy traffic. • Injectable, free flowing, self leveling
and non-shrink
CEMENTITIOUS GROUTING • Pourable and injectable
CERA EXPAN 250 Cementitious • Helps in rapid installation and gains
expanding admixture for grout and high compressive, flexural and tensile
concrete. strength
• Non-metallic, permanent expansion, It is recommended for strengthening
high compressive and bond strengths the existing concrete elements like
• Reduced creep and no shrinkage, columns, beams, foundation members
dimensional stability etc. It is used for filling very small
• Used in pre-stressing and post gaps of size lesser than 0.25 mm
tensioning applications because of its very low viscous nature.
• Ideally used as an additive for
pressure grouting in waterproofing CERA SCREED EPLV 3K High Yield : 1100 kg / Cum
applications performance non-shrink epoxy grout.
• Pourable, free flowing, self leveling Packing: 2 & 1
Dosage: 225 gm / 50 kg cement bag. and non-shrink
• Helps in rapid installation and gains POLYESTER RESIN
Packing: 225 high compressive, flexural and tensile ANCHOR GROUT
strength CERA ANCHORSET Quick setting
It is recommended for strengthening polyester resin grouts.
the existing concrete elements like • Excellent strength gain, non-
columns, beams, foundation members expanding and non-shrink
etc. It is used for filling very small • Reduced drilling costs, resistant to
deteriorating agents

INDUSTRIAL GROUT PROTECTIVE AND
DECORATIVE
It is ideal for high speed, high CERA INJECT LV PLUS 2K high density COATINGS
strength anchoring, holding down
bolts for machinery, crane rails, fast curing, high performance, solvent CONCRETE COATINGS
railway tracks connected to concrete CERA CORROSEAL CT Coal tar pitch
sleepers, etc., It facilitates permanent free PU injection foam grout system. epoxy for structural protection.
installation of starter bars, • Temporary and permanent sealing of • Excellent resistance against agents
connectors, base anchors and water bearing cracks of concrete deterioration
foundation bolts • Stops water leakage by injecting • Easy to use, ensures durable
Cera Anchor Set -S (Standard Grade) from negative side concrete structures
Cera Anchor Set - P (Pumpable Grade ) • Suitable for drinking water tanks Mainly used as a protective coating
It is recommended to be used as an for RCC structural elements, piers,
Yield: 2000 kg / Cum effective system for arresting existing foundations etc., for on-shore and off-
leakages from water bearing shore applications, coating of metal
Packing: 1 structures, underground structures pipes, grills, manhole covers and
and tunnels, dams, etc., drainage systems.
It can be used in drinking water tanks, Coverage: 3 - 2.5 Sqm / kg / 2 coat
swimming pools and reservoirs.
Packing: 6 & 1
Coverage: 2 - 1.5 sqm / kg 2 coat CERA CORROGUARD EP High build
epoxy coating for steel and concrete
Packing: 40 structures.
• Excellent protection against
PU FOAM GROUTS chemical and acid environments
AS WATER STOPPER • Excellent abrasion resistance and
long lasting
CERA INJECT SS Single component, • Excellent adhesion to most surfaces
solvent free, hydrophilic polyurethane It is used as a protective coating for
based injection system for sealing and RCC structural elements, piers,
filling of joints, voids and cracks in foundations etc., against saline,
concrete structures either under corrosive or chemiçal and
moisture or water bearing conditions. acidic environments.
• Stops water leakage by injection
from negative side Coverage: 6 - 5 Sqm / kg / coat
• Environment friendly
• Suitable for potable water tanks Packing: 6 & 1
• Sealing and stabilisation of cracks in
loose rock areas STEEL COATING
• Ideal for sealing of leakages in
diaphragm walls CERA ZINC-ZR Epoxy zinc rich,
anti-corrosive primer.
Coverage: NA • Excellent protection for steel
• Used in coastal as well as industrial
Packing: 20 & 10 ,2 ,1 corroding environments
Used as a primer for protection of
structural steel, M.S. liners, conveyors,
storage tanks, etc,. Also used in
fertilizer plants, refineries, hydro
electric projects, port, bridges and
flyovers.

Coverage: 6 - 5 Sqm / kg / coat for
steel structures.

Packing: 6 & 1 kg

PROTECTIVE AND DECORATIVE COATINGS

ANTI CARBONATION Coverage: • Does excellent waterproofing when
COATINGS Coating - 6 - 5 Sqm / kg / Coat used as a PTE (Primary Thermal
Primer - 7 - 6 Sqm / kg / Coat Envelop Coating)
CERA INFRAGUARD-S Thermosetting • Allows the entrapped moisture to
acrylic protective and decorative Packing: 25 & ,10 ,6 ,5 ,1 escape by MVT system
coating for concrete and masonry. • Lowers roof and wall temperatures
• Excellent resistance to THERMAL RESISTANT and reduces cooling costs
disintegrating agents like COATINGS • Acts as a natural barrier to heat
carbondioxide, chlorides, algae, etc. transfer
• Single component system in a wide CERA COOLENT PLUS Specially • Can be used as roof coating and
range of colours, easier application formulated solar radiant single thermal insulation slip resistant
Protects concrete and masonry component acrylic co-polymer based coating
structures mainly in coastal areas, for surface coating. • Helps to achieve phenomenal
protection of old or new concrete • Acts as a natural barrier to heat quantity of energy and money savings
structures, bridge decks and piers. transfer • An eco friendly acrylic water based
Primer: CERA INFRAGUARD S PRIMER • Provides high solar thermal single pack system
reflectance and thermal emissivity
Coverage: • Can be used as roof coating and Coverage: 2 to 2.5 Sqm / kg / 2 coat
Coating - 6 - 5 Sqm / kg / Coat thermal insulation slip resistant
Primer - 7 - 6 Sqm / kg / Coat coating Packing: 20 & 10 ,6 ,3
• Helps to achieve phenomenal
Packing: 25 & 20 ,10 ,6 ,5 ,1 quantity of energy and money savings It helps to achieve exceptional
• Excellent heat resistance quantity of energy savings i.e.
CERA INFRAGUARD-WA Single • Easy to use system electricity bill savings in excess up
component aqueous acrylic polymer to 20 %.
based anti- carbonation coating system
for concrete & masonry surfaces. Coverage: 2 - 1.5 Sqm / kg 2 coat
• Excellent resistance to chlorides and
sulphates ideal for application in Packing: 10 & 5 CERA COTE THERMOLITE PRIMER C
coastal areas, Interior/Exterior Single component, low VOC; moisture
coating CERA COTE THERMOLITE 163 Specially curable, acrylic coating system which
• Excellent bond with substrate and formulated solar radiant single readily reacts with atmospheric
good crack bridging properties component acrylic co-polymer based oxygen and cures instantly upon
• ldeally suitable for concrete and surface coating made out of white application on the substrates and
masonry structures in industries and microscopic hollow ceramic spheres used as a primer before applying CERA
bridge decks and piers in coastal which works by reflecting, refracting COTE THERMOLITE 163 on concrete
areas. and dissipating radiant heat and thus and cement surfaces.
It is recommended as a barrier to reducing heat transfer through • Penetrates into the substrate and
carbon, acid gases as well as other building roofs, walls and ceilings. has a very good adhesion with
atmospheric gases to ensure • Easy to use system concrete surfaces
structural durability. • Has class A fire retardency
Available in different colors. • Excellent heat resistance
Primer: CERA INFRAGUARD WA • Minimizes solar heat gains
PRIMER • Provides high solar thermal
reflectance and thermal emissivity

PROTECTIVE AND DECORATIVE COATINGS

• Fast drying and hence lowest down EXCLUSIVE FOR PAVER INDUSTRY CERA WATER REPELLENT-S
time for operational ease. High-grade solvent based formulation
• Provides a uniformity to the finish CERA ACRYL - Solvent based to promote hydrophobic properties in
coat decorative and water repellent concrete and masonry.
• Does not stain, inhibits the passage coating for exposed surfaces. • Exhibits excellent water repellant
of water and water-borne • Resistant to damaging anti fungal and anti-alkali properties
contaminants environmental agents • Colorless, transparent and resistant
• Minimizes eflorescences, allows • Gives a glossy finish, excellent to UV radiations
substrate transpiration dirt repelling characteristics • Reduces staining and efflorescence
• Non-toxic and safe to apply as it has Used as protective coating for • Excellent dirt repelling
low VOC structural elements such as facades, characteristics
natural stone, fair faced concrete • Resistant to rain, humidity and heat
Coverage: 6 - 5 sqm / kg / 2 coat and stuccos walls, retaining walls, • Resistant to freezing and thawing
etc., against aggressive media.
Packing: 20 & 10 ,3 ,1 Coverage: 4 - 3.5 sqm / kg / 2 coat
Coverage: 6 - 5 sqm / kg / 2 coat
CERA COTE THERMOLITE PRIMER - M Packing: 20 & 10 ,5 ,1
Single component, low VOC, moisture Packing: 20 & 10 ,1
curable, hybrid silicone modified CERA VITA PLUS is a nano technology
coating system which readily reacts CERA ACRYL WA - Water based based coating, which provides surface
with atmospheric oxygen and cures decorative and water repellent coating protection for all natural stones and
instantly upon application on the for exposed surfaces. cement finish surfaces.
substrates and used as a primer before • Resistant to damaging • Prevents fungal & algae growth
applying CERA COTE THERMOLITE 163 environmental agents • Drastically reduces water absorption
on metal surface. • Gives a glossy finish, excellent dirt • Provides excellent easy to clean
• Has a very good adhesion with metal repelling characteristics surface
surfaces Used as protective coating for • No influence on color or finish of
• Fast drying and hence lowest down structural elements such as facades, stones
time for operational ease natural stone, fair faced concrete and • Excellent anti-stain and anti-dirt
• Provides a uniformity to the finish stuccos walls, retaining walls, etc., property
coat against aggressive media. • Protects the beauty and enhances
• Non-toxic and safe to apply as it has the life of all natural stones
low VOC Coverage: 7 - 6 sqm / kg / 2 coat
Coverage: 4.5 - 4 sqm / kg / 2 coat
Coverage: 6 - 5 sqm / kg / 2 coat Packing: 20 & 10 ,1
Packing: 10 & 5 ,1
Packing: 20 & 5 ,1 CERA WATER REPELLENT - W High
grade nano technology based material CERA COTE EP CR 2K Epoxy based
REPELLENT COATINGS formulated from special silicons to unique formulation, which produces
promote hydrophobic properties in hard, hygienic, chemical resistant,
concrete and masonry. aesthetically pleasing, colored coating
• Exhibits excellent water repellent ideal for chemical spillage areas,
anti-fungal and anti-alkali properties water storage tanks, STPs and
• Colorless, transparent and resistant reservoirs.
to UV radiations • Excellent adhesion
• Reduced staining and efflorescence • Excellent resistant to a wide range of
• Improved dirt repelling chemicals and salts
characteristics • Hygienic, applicable to food and
• Resistant to rain, humidity and heat pharmaceutical industries
• Resistant to freezing and thawing • Improved aesthetics
• Makes no change in surface colour • Non-toxic
and appearance • Resistant to Damp surface
Primer: CERA COTE EP CR PRIMER
Coverage: 4 - 3.5 sqm / kg / 2 coat
Coverage: 4.5 - 4 m2/kg /coat
Packing: 100 & 50 ,25 ,10 ,5 ,1 kg
Packing: 6 & 1

CONCRETE REPAIR

CERA COTE EP CR PE IP-NET Epoxy BONDING AGENTS • Enhances bridging effect against
based coating system where the post construction hairline cracks
interwoven polymer films aid in better CERALATEX SBR Styrene Butadiene • Excellent adhesion to porous and
mechanical properties and chemical Rubber latex is a multipurpose cement non-porous surface concrete
and salt resistance serving as a additive and bonding agent, which has /masonry etc.,
protective coating on concrete been specifically designed for use with
structures exposed to aggressive cement compositions. It can be used Coverage: For Bond coat: - 5 : 1 : 1
chemical environment, saline water to form water and vapour resistant (Cera Latex SBR PRO : Water :
etc. Forms a smooth and aesthetically bonding coats, prior to application of Cement)
pleasing film having excellent renders, plasters and screeds. For Polymer modified Mortar: -
adhesion to the substrate and have CERALATEX SBR aids in better 0.15 : 0.09 : 2.6 : 1 (Cement : Sand :
good resistance to wide range of mechanical properties by ensuring a Cera Latex SBR PRO : Water)
chemicals and Organic acids, Alkalis, sound contact area between old and For Waterproof Coating: - 2 to %7 by
Oils, Fats, Salts etc., new concrete. weight of Cement
• Excellent adhesion • Easy to use
• Excellent resistant to a wide range of • Excellent bond strength Packing: 100 ,50 ,20 ,10 ,6 ,5 ,1, 0.500,
chemicals and salts • Resistant to water penetration 200 & 210
• Hygienic, applicable to food and • Improved tensile, flexural and
pharmaceutical industries compressive strength CERA POLYMER LATEX Acrylic
• Improved aesthetics • Highly recommended for repairs and co-polymer based water resistant
• Non-toxic rehabilitation of structures additive and bonding agent, which has
• Resistant to Damp surface been specifically designed for use with
Coverage: For Bond coat: - 5 : 1 : 1 cement compositions. It can be used
Coverage: 4 - 3.5 sqm / kg / 2 coat (Cera Latex SBR : Water : Cement) to form water and vapour resistant
Primer - 6 to 7 sqm / kg / coat For Polymer modified Mortar: - bonding coats, prior to application of
0.15 : 0.09 : 2.6 : 1 (Cement : Sand : renders, plasters or screeds. CERA
Packing: 6 & 1 Cera Latex SBR : Water) POLYMER LATEX aids in better
For Waterproof Coating: - 2 to %7 by mechanical properties by ensuring a
CERA COTE APU High-grade aliphatic weight of Cement sound contact area between old and
polyurethane based two-component new concrete.
system recommended for use as a Packing: 100 ,50 ,20 ,10 ,6 ,5 ,1 ,0.500, • Excellent bond strength
protective coating to ensure lasting 200 & 210 • Improved tensile, flexural and
durability for exposed surfaces of compressive strength
steel, concrete and masonry CERALATEX SBR PRO Specially • Resistant to water penetration
structures. Also recommended for formulated multipurpose additive for • Highly recommended for repairs and
external waterproofing of structures. all cement systems based on Styrene rehabilitation of structures
• Excellent resistance to most Butadiene Rubber latex. Add to any • Easy to use
industrial chemicals cement system, supremely enhances
• Resistant to carbon dioxide, chloride the water, vapor resistance and also Coverage: For Bond coat: - 5 : 1 : 1
and sulphates - ideal for coastal areas aids in better mechanical property. (Cera Polymer Latex : Water :
• Resistant to Ultra-Violet radiations • Easy to use Cement)
• Durability assured in all climatic • Excellent bond strength For Polymer modified Mortar: -
conditions • Excellent resistance to water 0.15 : 0.09 : 2.6 : 1 (Cement : Sand :
• Available in a range of colours penetration Cera Polymer Latex : Water)
• Can be over coated with aluminium • Improves tensile, flexural and For Waterproof Coating: - 2 to %7 by
or silver paint compressive strength weight of Cement
• Ideal waterproofing system for new
Coverage: 3 - 2.5 sqm / kg / 2 coat building and repair of structures Packing: 100 ,50 ,20 ,10 ,6 ,5 ,1, 0.500,
• Non-toxic, highly suitable for 200 & 210
Packing: 6 & 1 portable water storage applications
• Highly recommended for repairs and CERA BONDIIT SUPER High strength
rehabilitation of structures elastomeric bonding agent based on
CBA technology for gypsum on concrete

/ RCC surface with white in colour CONCRETE REPAIR MICROCONCRETE
liquid base; it creates a chemical and
mechanical bond between very precast units are assembled on the CERA MICROCONCRETE Free flow
smooth RCC surface and the plaster. site. CERA BOND EP CP can be microconcrete for demanding concrete
• Easy single coat brush application effectively used in the construction of repair application.
• Bonding strength is more than 2 bridges, abetments, tunnels, • Excellent adhesion with parent
kg/sq.ft foundations and heavy engineering concrete, positive grip with
• Imparts durable strong bond thus structures. reinforcement
eliminating the risk of plaster • Confirms to FIP Specifications • Efficient restoration material
de-bonding • Excellent squeezability and high • Ideal material for structural
• Provides chemical as well as bond strength strengthening of columns, beams etc.,
mechanical bonding between plaster • Thixotropic epoxy adhesive, suitable by jacketing
and substrate for thin and thick joint application • Widely used in repair where
• Remains tacky for 5-7 days, create • Transmits compressive, shear and conventional concrete placing and
chemical bonding only when comes in tensile stresses between the segments vibrating is difficult and in awkward
contact with cement, gypsum or lime • Suitable for bonding old to new locations, areas of high reinforcement
thus savings in material, time and concrete elements congestion, etc.,
labour • Develops fast joint strength to Yield: 2400 kg / Cum
• No hacking required on concrete enable continuous erection of Packing: 40 & 25
surface , hence prevention of micro segments
cracking in concrete • Allows slight movements during REINFORCEMENT REPAIR
• Being an elastomeric material it can installation for positioning and CERA RUST REMOVER High
withstand movements in the structure aligning segments during erection performance solvent based rust
without cracking • Provides waterproof seal across the remover.
• It covers 100% of the area unlike joints to protect the pre-stressing • Chloride free
hacking that covers only 30 to 35 % tendons against corrosion • Effective in unreachable areas
• Removes rust from ferrous and non-
Coverage: 100 Sqft / Ltr Coverage: 2 - 1.5 Sqm / Kg / Coat ferrous surfaces

Packing: 20 & 10 ,5 ,1 Packing: 6 & 1

CERA BOND EP Epoxy bonding agent
for structural concrete.
• Provides monolithic bond, transmits
very high stresses
• Excellent water and alkali resistance
• Applied on dry as well as damp
surfaces, cured under moist or wet
conditions
Used for horizontal and vertical
surfaces as repair ingredient for
jacketing applications, for
strengthening the existing concrete
elements like columns, beams etc.,
and to ensure water proof joints in
constructions.

Coverage: 2.5 - 2 Sqm / Kg / Coat

Packing: 6 & 1

CERA BOND EP CP 2K specially
formulated epoxy adhesive and
bonding agent to meet FIP standards
for segmental construction where

CONCRETE REPAIR

It is ideally suitable for cleaning the EPOXY REPAIR • Suitable for rendering concrete
corrosion affected reinforcement bars MORTAR/GROUT surfaces such as RCC walls and ceiling
in concrete repair jobs. It also CERA SCREED EP - V Three component
removes the rust from MS structures epoxy system specially formulated for Yield: 2400 kg / Cum
before application of protective application on vertical surfaces.
coatings or paints. • Easy to use Packing: 40
• High bond strength
Coverage: 9 - 8 Sqm / kg • Excellent chemical resistance CERA POLYMORTAR Single component
• Impact and abrasion resistant cementitious repair mortar.
Packing: 20 & 10 ,5 ,1 • High flexural, compressive and • Single component and easy to use
tensile strengths • Excellent adhesion to most surtaces
CERA RUST CONVERTER High • High flexural, compressive and • Suitable for horizontal and verfical
performance resin based rust converter tensile strengths application
used for applications in concrete It is recommended for renovating old
repairs and for converting rust to a Yield: 2000 kg/Cum (Approx.) structures and repairing new
corrosion resistant film on construction projects. It is a
various metal components. Packing: 6 & 3 ,1 multipurpose patching and repairing
• Easy to use mortar which can be applied on
• No effect in rust-free areas CERA GROUT ULTRA - EPLV 2K epoxy vertical and horizontal surfaces.
• Effective in unreachable areas resin injectable grout for structural
• Excellent adhesion to the substrate applications especially for injection Yield: 2300 kg/Cum (Approx.)
• Converts magnetite and hematite grouting in cracked and porous
rust on ferrous surfaces concrete, because of its ultra low Packing: 50 & 25 ,1
• Ideal for application in areas where viscosity.
cleaning of rust is difficult • Moisture insensitive
• Self-leveling and non-shrink
Coverage: 1 ltr will cover 7 - 6 Sqm • Resistant to acids and alkalis
on brush application. • Capable of transmitting high
stresses
Packing: 20 & 10 ,1 • Helps in rapid installation and gains
high strength
CERA REBARCOTE Superior corrosion • Capable of withstanding repetitive
coating protection system for dynamic loading
reinforcement bars. • High compressive, flexural and
• Does not adversely affect steel - tensile strengths
concrete bond
• Increases durability of the structure Yield: 2000 kg/Cum (Approx.) CERA FIBRECRETE Fibre enriched,
and reduces life cycle cost ready to use structural repair mortar.
• Ideal for pile foundations in marine Packing: 1 • Enhanced tensile and flexural
locations and for structures exposed capacity, excellent resistance to crack
to industrial and saline environments CEMENTITIOUS formation and propagation
REPAIR MORTAR • Randomly oriented fibers bridge
Coverage: Per MT for different hairline cracks
diameter of steel; CERA RENDER COAT Specially • Ideal for repair of spallen and
16mm dia - 11kg formulated mortar with Portland damaged portions of beams, columns
12mm dia - 15kg cement, graded fillers and polymers to or slabs,good adhesion with parent
10mm dia - 18 kg meet the requirements of concrete
waterproofing, crack free, thin render
Packing: 100 ,50 ,10 ,6 ,1 ,0.5500 for application to RCC walls and Yield: 2300 kg/Cum (Approx.)
& 210 ceiling.
• Rendering brick works and block Packing: 50 & 25 ,1
works
• Helps filling up the undulations in
the normal plasters

CONCRETE CARBON FIBRE REINFORCED POLYMERS
REPAIR
To increase shear, flexural and load CARBON PRIMER
CRACK FILLER bearing capacity of any concrete
CERA POLY CRACK FILLER Polymer structure CERA PRIMER EP 18 Epoxy resin based
Modified Crack Filling Agent. 2K liquid impregnating primer
• Excellent crack filling ability CARBON MEMBRANES having good penetrating properties
• Non-shrink and flexible for concrete surfaces and suitable for
• Can be stained or over coated CARBON MEMBRANES Unidirectional priming the surface in FRP wrapping
It is recommended to fill cracks in carbon fiber membrane CERA CFR applications.
masonry, concrete and plaster surface. MEMBRANE 230)230 GSM) / CERA
It can be used as an external CFR MEMBRANE 400)400 GSM) Coverage: 3.0 –2.5 Sqm / Kg
rendering coat to even out surfaces.
CARBON LAMINATE Packing: 2
Coverage: 240 m / Kg to fill a V -
groove of 6 mm depth CERA CFR W 100 LA High strength CARBON
prefabricated carbon fibre laminates BONDING ADHESIVE
Packing: 20 & 10 ,1 for increasing flexural strengths of CERABOND EP CFR 2K highly viscous
structures epoxy adhesive and bonding agent for
POLYESTER RESIN MORTAR CFR membrane.
CERA POLYMORTAR PE Polyester resin CARBON STAPLES
mortar for general concrete repairs. Coverage: 2.5 - 2 Sqm / kg
• High bond strength and stronger
than concrete Packing: 6 & 1
• Resistant to oil, grease and
chemicals SATURANT
• Quick setting and versatile in nature CERA PRIMER EP SA 2K liquid epoxy
with wide range of applications saturant having good adhesion
It is ideal for patching potholes in properties and is suitable for use in
industrial floors, for leveling the CFR wrapping applications.
runway damaged areas and also
suitable for fertilizer plants, wharves, Coverage: 2.0 - 1.8 Sqm / kg / coat
jetties and also in chemical laboratory
repairs. Packing: 2

Yield: 1550 kg/Cum (Approx.) CERA CFR STAPLES Concrete crack
control stitching system comprised of
Packing: 6 & 1 kg high tensile strength and modulus
carbon fiber
PATCHING MATERIAL
CERA PATCHCRETE 2K polymer CARBON ROD
modified structural repair mortar.
• Chloride free
• Excellent bond and high strength
• Non-shrinking and low permeability
It is ideal for patching potholes in
industrial floors, for leveling the
runway damaged areas. Aids in
repairing damaged concrete in precast
units, stair treads, kerbs, etc.,

Yield: 2000 kg/Cum (Approx.)

Packing: 25 (Part-A : 1 Kg & Part-B : 24 Kg)

INDUSTRIAL FLOORING

EPOXY FLOORING CERA 3D F Precisely formulated for coating for food processing industries
long work time which is required for and operation theaters.
CERA SCREED EP Monolithic seamless 3D flooring, table tops and kitchen
epoxy topping system. tops in order to create designs Coverage: 5 - 4 Sqm / Kg / Coat
• Impact and abrasion resistant incorporating different products for Primer - 7 - 6 Sqm / Kg / Coat
• Excellent chemical resistance, high innovative textures and designs.
flexural, compressive and tensile • High gloss Packing: 6 & 1
strengths • UV resistant
• Effectively used as floor topping • Stunning visual effect CERA ACRYL PUD High grade,
material for industrial plants and • Water clear appearance polyurethane dispersion based floor
processing areas, petro chemical • Anti-bacterial, anti-fungal & coating for paver blocks, terrace floor
industries, battery rooms, food moisture free tiles, cement and concrete floors. It
processing and pharmaceutical beautifies your exterior floor tiles and
industries, workshops etc. Also used Coverage: 1 kg would cover around protects your flooring from algae /
for repair of dilapidated RCC 0.5 Sqm for a thickness of 1 mm fungal attack.
structures • Superior washability
Packing: 50 & 25 ,1 kg • Anti-fungal properties
Yield: 2000 kg/m3 (Approx.) • Resistant to UV radiations
Packing: 13.6 & 6.8 EPOXY/PU COATING SYSTEMS • Superior abrasion resistant
CERA SELF LEVEL EP Solvent free, self CERA COTE-EP Epoxy based industrial • Superior gloss and long lasting
leveling epoxy floor topping system. floor coating system. • Long-lasting protection for your
• Resistant to most chemicals • Resistant to wide range of chemicals floor
• Abrasion resistant and durable and to abrasion • Excellent adhesion to terrace floor
• Hygienic provides joint free flooring • Excellent adhesion to concrete tiles, concrete surfaces and all kind of
• Available in various colours substrate pavements
It is recommended for use in clean • Improved aesthetics, hygienic and
rooms, laboratories, electronic smooth Coverage: 5 - 4 Sqm / Kg / Coat
industries, food processing industries, • Available in various colours
operation theater, etc., Applied on vertical surfaces and Packing: 10 & 5 ,1
Yield: 2000 kg/m3 (Approx.) ceilings of buildings to resist
Packing: 17 & 8.5 ,4.25 aggressive chemicals and to produce CERA ACRYL FLOORX - S High grade,
hygienic environment for food solvent based coating for natural
processing industries, swimming stones, paver blocks, cement and
pools, operation theatres, battery concrete floors.
rooms, etc., • Superior abrasion resistant
• Superior gloss and long lasting
CERA COTE PU 2K solvent free, • Antifungal properties
polyurethane protective coating • Resistant to UV radiation
system. • Superior washability
• Impermeable surface finish • Easy to maintain
• Excellent UV resistant • Long lasting protection for your
• High anti carbonization properties floor
• Excellent resistance to most • Excellent adhesion to natural
industrial, atmospheric chemical stones, concrete surfaces and all kind
attacks of pavements
It can be applied as a chemical and UV
resistance coating for industrial floors Coverage: 5 - 4 Sqm / Kg / Coat
and walls and also as a hygienic
Packing: 10 & 1

CERA COTE PU CLEAR 2K solvent free,
polyurethane protective coating
system.
• Excellent resistance to water
ingress, UV rays
• No yellowing on exposure to
sunlight

INDUSTRIAL FLOORING

• Excellent resistance to most • Provides absolute grip FLOOR HARDENERS
industrial and atmospheric chemical • Cost effective and hygienic
attacks • Abrasion resistant and smooth CERA HARD FLOOR Heavy duty, non-
• 100 % impermeable surface finish. • Resistant to a wide range of metallic, abrasion resistant, concrete
Also suitable for coating over colored chemicals floor hardener.
epoxy & PU flooring and external • Protects the applied surface from • Provides highly abrasion resistant
waterproofing damages surface to concrete floors; can handle
heavy duty traffic without wearing,
Coverage: 5 - 4 Sqm / Kg / Coat Packing: 3 & 1 spalling and dusting
• Resistant to oil and grease
Packing: 6 & 5 ,1 CHEMICAL AND HEAT penetration
RESISTANT EPOXY SYSTEM • Bonds monolithically with base
CERA COTE EP-W Water based food concrete
grade epoxy, solvent free surface CERA COTE EP CR Epoxy based • Designed to effectively reinforce
coating system. 2K chemical resistant coating system. indoor and outdoor concrete floors for
• Excellent adhesion • Excellent adhesion light, medium and heavy duty
• Makes surface water resistant • Resistant to damp surface industries, pavements, shopping
• Non-toxic, solvent free and food • Excellent resistance to a wide range centers, schools and institutions,
grade of chemicals and salts commercial complexes, garages,
Used as a hygienic surface coating for It forms a smooth and aesthetically showrooms, parking lots, etc.,
food processing industries, swimming pleasing film having excellent
pools, operation theater, potable adhesion to the substrate, good Coverage: Light duty - 2.5 Kg/Sqm
water tanks, etc., resistance to wide range of chemicals Medium duty - 3.5 Kg/Sqm
and organic acids, alkalis, oils, fats, Heavy duty - 5.0 Kg/Sqm
ANTI SKID COATING salts, etc. Ideally suitable for STP and Ultra Heavy duty - 7.5 Kg/Sqm
chemical plants.
Packing: 6 & 1 Packing: 40 & 25

CERA SKIDNO Solvent based high CERA SEALER CON - S Solvent-based
grade epoxy coating intended to form deep penetrating sealer designed to be
seamless, anti-skid floors. It is used to used on concrete floors as a floor
provide a dust-proof, easy to maintain hardener to improve the dust proofing
surface which possess hydrophobic and abrasion resistance
and oleophobic properties. characteristics.
• Excelland Anti-skid property • Easy to use
• Easy to apply • Transparent colour
• Low maintenance • Good impermeability
• Excellent adhesion • Allows concrete to breathe
• Improved aesthetics • Penetrates deep inside the surface
• Improves dust proofing
characteristics
• Reduces stain and improves wear
resistance
• Prevent ingress of waterborne
chlorides and sulphates

Coverage: 3.5 - 2.5 Sqm / kg / Coat

Packing: 10 & 1

CONCRETE SURFACE TREATMENT PRODUCTS

CERA HARDENER DP D High-grade, CURING COMPOUNDS • Easy to apply, saves labour costs
nano technology based material, CERA POLYCURE-W Wax based It is used for vertical structural
formulated from specialty chemicals concrete curing compound. members like columns, canal lining,
to promote the surface hardness of Coverage: 4.5 - 3.5 Sqm / Kg / Coat dams, other irrigation structures,
concrete and to make the surface dust Packing: 200 & 100 ,50 ,10 ,5 ,1 kg airport runways/ concrete rows,
proof. CERA POLYCURE-S Sodium silicate aprons and hard standings etc.
CERA HARDENER DP D XL Formulated based concrete curing compound.
with higher particle size to give final • Eliminates use of water, hessian or Coverage: 5 - 4 Sqm / Kg / Coat
shine by anchoring with CERA polyethylene film
HARDENER DP D. • Concrete temperature remains low Packing: 200 & 100 ,50 ,10 ,6 ,1
• Becomes integral part of concrete • Chloride free, no risk of erratic or
without much change poor curing, cement hydrates WALL TREATMENT
• Excellent surface hardener and dust efficiently CERA WALL PUTTY Cement based
proofer for concrete surfaces • It is used for canal lining, dams, leveling agent for preparation of wall
• Reduced staining and efflorescence irrigation structures, airport runways, surface for painting.
• Excellent dirt repelling aprons and hardstandings, roof decks, • Water resistant
characteristics harbours, pre-stressed beams, • Good bond strength
• Resistant to freezing and thawing columns, etc., • Suitable for new and old surface
Coverage: 5 - 4 Sqm / Kg / Coat It can be directly applied on fair faced
Coverage: 8 - 6 Sqm / kg / Coat Packing: 200 & 100 ,50 ,10 ,5 ,1 kg brick masonry, hollow blocks and
concrete walls for preparing a smooth
Packing: 250 & 120 ,60 ,10 ,5 ,1 kg CERA POLYCURE-R Resin based and leveled surface for painting
curing compound.
CERA HARDENER - L Concentrated & • Good solar reflectance, which keeps Coverage: 1.5 Sqm / kg for a
premium nano-lithium based densifier / the concrete temperature low thickness of 0.5 mm
hardener for cementatious surfaces. • No need for mechanical scrubbing as
Lithium is a chemical element known it penetrates deep inside the concrete Packing: 40 & 20 ,10 ,5 ,1
to reduce damage to concrete caused
by the alkali-silica reaction by CERA WALL PUTTY WPX Cement
penetrating the surface and reacting based waterproof wall putty designed
with the free limes particles. to fill cracks & dents on the plastering
• Penetrates deep into the surface to surface.
improve hardness • Superior waterproofing property
• Increases compressive and flexural • Suitable for new and old surfaces
strength of surface • Enhances the coverage of Paint &
• Improves abrasion resistance Primer
• Reduces liquid penetration • Excellent spreadability – results in
• Simplifies maintenance more coverage output
• Stops dusting • Good bond strength
• Can be applied directly over
Coverage: 8 - 6 Sqm / kg / Coat concrete and cement plaster
• Fills fine hair-line cracks and pin
Packing: 250 & 120 ,60 ,10 ,5 ,1 kg holes
• Can be applied in 1 to 2 mm
thickness per coat
• Economical

Coverage: 1.7 - 1.6 m2 / Kg for a
thickness of 0.5 mm

Packing: 20

CONCRETE SURFACE TREATMENT PRODUCTS TILING PRODUCTS
T&ILE MADOHERSTIVAESR
CERA WALL PUTTY EX Single • Time saving, no cuts or breaks at
component, acrylic emulsion based edges or corners CERABOND 27 - UTA
leveling putty for preparation of Recommended for all sorts of Universal Tile Adhesive
plastering surfaces. constructions involving forms, CERABOND 28 - T2NSA
• Water resistant suitable for columns, beams, slabs Recommended for Floor, Wall & Tile
• Good bond strength where smooth surface is desired. on Tile Application
• Suitable for new and old surfaces CERABOND 29 - T2NSA
• Can be applied directly over Coverage: Wood - 50 Sqm / Ltr Recommended for Marbles & other
concrete and cement plaster Steel - 70 Sqm / Ltr areas where white colour adhesive is
• Fills fine hair-line cracks and pin required.
holes Packing: 200 ,100 ,50 ,10 ,5 ,1 & CERABOND 30 Specially formulated
210 white adhesive for glass tiles.
Coverage: 0.85 m2 / Kg for a thickness • Water resistant
of 1 mm CERA MOULD RELEASE AGENT - WB • High adhesive and bond strength,
Concentrated emulsified water ensures permanent installation
Packing: 20 & 10 ,4 ,1 thinnable mould release agent • Prevents crazing and shedding of
• It is versatile and is suitable for all tiles
CERA WALL PRIMER Water thinnable types of moulds • Widely used to fix ceramic wall and
emulsion based primer for interior and • It is non-staining and reduces floor tiles as well as marble, glass tiles
exterior application. occurrence of blow holes and stone claddings, etc.
• Protects putty and wall • High quality finish and produces Coverage: 1.75 - 1.25 Sqft / Kg for 3
• Enhanced coverage and finish of fair-faced concrete mm bed thickness
coatings It is recommended to be used for all Packing: 20
• Good resistance to moisture kinds of shuttering materials like CERABOND 38 Ultra-premium polymer
It can be used over the existing wall plywood, timber, steel, etc., results in modified tile adhesive to withstand
putty which will seal the minute pores a cleaner concrete after the vibration, structural movements and
in the wall putty. shutter/mould is released. wind pressure and an ideal bonding
It also gives enhanced coverage and material for fixing ceramic wall and
better adhesion for the finishing coat. Coverage: Wood - 70 Sqm / Ltr floor tiles, as well as marble and stone
Steel - 90 Sqm / Ltr claddings of any size applications.
Coverage: 8 - 7 Sqm / Kg / Coat This is supplied in powder form and
Packing: 200 ,100 ,50 ,10 ,5 ,1 & possesses many advantages over other
Packing: 20 & 10 ,4 ,1 210 tile adhesive.

MOULD RELEASE AGENTS

CERA MOULD RELEASE AGENT - M
Mineral oil based mould release agent.
• Easy removal of form work, ensures
good and clean surfaces of structural
members





TILING PRODUCTS

CERAFIL 45 T Superior grade high EPOXY JOINT FILLERS Coverage: Please refer Shade card
polymer modified cementitious tile Packing: 5 & 2 ,1
joint grout with graded fillers to CERAPOXY- 63 Three-component epoxy
accommodate shrinkage cracks in resin based tile joint grout which has CERA GLASSPOXY 2 63K see through
exposed areas. colour in the base, supplied in epoxy resin based tile joint grout
• Has high bond strength pre-weighed measures suitable for supplied in pre-weighed measures
• Antifungus and water repellant grouting tile joints in commercial, suitable for grouting
• Non-shrinkable and will not crack residential and industrial areas. horizontal tile joints in commercial,
• Available in all tile colors and shades • Suitable for use in wet areas residential and industrial areas. It is
• Tough and has high abrasion • Resistant to wide range of chemicals developed by a special formulation
resistance • Various colors and easy to apply with two variant to horizontal &
• Low dirt accumulation and provides • Excellent washability post vertical grade where pigments can be
clean joints application added and filled in the joints for
It has built in flexibility to withstand • Good resistance to abrasion and enhancing the beauty.
forces created by expansion and stain-free • Suitable for use in wet areas
contraction of concrete beneath the • Hygienic and anti-bacterial as it is a • Hazzel free and easy to clean
tile. food grade epoxy • Hygienic and anti-bacterial
• Various colors and easy to apply
Coverage: For tile size 8 * 600 * 600 Coverage: Please refer Shade card • Resistant to wide range of chemicals
mm will cover approximately 48 Sqft Packing: 5 & 2 ,1 ,0.500 • Good resistance to abrasion and
/ Kg for 3 mm joint width CERAPOXY PRO- 63 2K epoxy resin stain-free
based tile joint grout supplied in • Extended setting time for easy
Packing: 25 & 10 ,1 kg pre-weighed measures suitable for cleaning
grouting tile joints in commercial,
CERA PROFIL 45 Superior grade residential and Coverage: Please refer Shade card
polymer modified cementitious tile industrial areas. Packing: 0.400
joint grout pocessing excellent • Hygienic and anti-bacterial
hydrophobic, efflorescence and stain • Suitable for use in wet areas ADDITIVES
resistance properties resulting in low • Various colors and easy to apply CERA ENDURA Ready to use, high
dirt pickup and clean joints. • Excellent washablity post performance polymer admix for use as
• Hydrophobic and stain resistant application an additive to cementitious tile grouts,
• Non-shrinkable and non-cracking • Resistant to wide range of chemicals to improve the flexibility and other
• Anti-efflorescent • Good resistance to abrasion and strength characteristics.
• It is tough and has high abrasion stain-free • Excellent increase in adhesion
resistance • Extended setting time for easy • Imparts high flexibility to the
• It has high bond strength cleaning system
• Low dirt pick up and provides clean • Recommended for darker shades to
joints enhance color brightness
• Available in range of colors

Coverage: For tile size 8 * 600 * 600
mm will cover approximately 48 Sqft
/ Kg for 3 mm joint width

Packing: 0.500

TILING PRODUCTS EXPANSION JOINT
SEALANT
Coverage: 100 ml Endura mixed with Coverage: 400 ml TILE ADMIX mixed
300 ml water shall be used for 1 Kg with 1 Kg of CERAFIL 45 covers aprox CERA SEAL (POURABLE GRADE) 2K
CERAFIL 45 will cover aprox 48 Sqft / Kg for 3 polysulphide sealant.
48 Sqft / Kg for 3 mm joint width and mm joint width and tile size of 600 * • High performance synthetic rubber
tile size of 8 * 600 * 600 mm 8 * 600 mm sealant, accommodates movements of
joints
Packing: 0.100 Packing: 4 & 0.400 • Excellent adhesion to most
construction surfaces and also to
CERA BOND SET L 100 Macro molecule CERA BOND ADMIX Ready to use, high metals
based liquid medium hydro soluble performance polymer admix for use as Applications include expansion joints
aqueous suspension concentrate to be a replacement for water in in mass concrete, subways, reservoirs,
diluted with Water prior to use with cement-sand mortars and other basements, retaining walls, bridges,
Portland Cement for traditional wet cementitious systems such as tile seawalls, water retaining structures,
on wet bed method of installing adhesives, ready-to-use mortars, etc., etc.,
ceramic, vitrified tiles and natural to improve the flexibility and other
stones using cement slurry made with characteristics of adhesive. Coverage: Q = (1.6 x L x W x D)/1000
Bond Set solution. • Excellent increase in adhesion Where Q = Quantity in kg, L = Length
• Easy to use • Single component, ready to use of joint in meters, W = Width of joint
• Self curing material in mm & D = Depth of
• Economical to use • Imparts enhanced flexibility to the joint in mm. 200 ml of Ceraseal
• Improves water resistants system primer will be sufficient for 8 linear
• Suitable for interior and exterior • Recommended for external cladding meters
application • Suitable for heavy duty applications
• Excellent adhesion and high bond with fair structural movements Packing: 4 ,& 1
strength
• Enhance the properties of cement Coverage: 5 Kg of CERA BOND CERA SEAL (GUN GRADE) 2K
considerably ADMIX shall be mixed with 20 Kgs of polysulphide sealant.
• Used for fixing tiles & stone for CERABOND 27 or CERABOND 28 • High performance synthetic rubber
Residential/Commercial sealant, accommodates movements of
Packing: 50 & 5 ,1 joints
Coverage: Dosage: 300 ml / Bag of • Excellent adhesion to most
Cement construction surfaces and also to
metals
Packing: 0.300 Applications include expansion joints
in mass concrete, subways, reservoirs,
CERA TILE ADMIX Ready to use, high basements, retaining walls, bridges,
performance polymer admix for use as seawalls, water retaining structures,
a replacement for water in etc.,
cementitious systems such as tile
joint grout, ready-to-use mortars, etc., CERA ACRYSEAL - Single component
to improve the flexibility, compresive acrylic sealant.
strength and other characteristics. • Resistant to ozone and ultra violet
• Resistant to water penetration radiations
• Enhance the colour brightness • High performance acrylic sealant
• Excellent adhesion and high bond • Accommodates the movements of
strength joints
• Imparts high flexibility to the
system
• Highly recommended for external
application
• Single component, ready to use
material

EXPANSION JOINT SEALANT

It is recommended to use effectively CERA MEC STRIP SEAL Treated • Bonds to almost all building
in sealing joints in concrete, brick and Hypalon expansion tape possessing materials
block work, around sanitary fittings, high flexibility and elongation • Bonds even on moist supports
basins, etc.,. It can also be used for to accommodate concrete expansion • Solvent and isocyanate free
perimeter sealing around doors and due to change in weather in concrete. • Permanently elastic at temperatures
windows, glazing, curtain walls, etc., • Elongation up to 400 % from °40-C to + °90C on wet.
Coverage: For 1 Mtr length groove • Permanently active system • Does not cause any corrosion in
with 10 mm depth * 10 mm width • High joint movement capacity metal joints
will require 200 grams • High chemical, UV and weather • For interior and exterior use
resistance • UV and weather-resistant
Packing: 1 & 0.200 It is recommended to be used for • Suitable for rooms with high
CERASEAL PU XLR - 61 2K sealing cold joints, construction humidity
polyurethane sealant. joints, cracks and expansion joints. It • Suitable for use with natural stone
• High performance in extreme can also be used for sealing internal • Neutral, odourless adhesive
conditions joints in concrete tanks, cast and • Compatible with materials used for
• It is low in pitch, low modulus and cement pipe connections, bridge sealing the edges in double glass
high movement accommodation decks, tunnels and reservoirs, etc., • Paintable with most water and
• Stable in high temperature and high solvent based paints. Is paintable wet
humidity conditions Packing: 300 ,250 ,200 ,150 mm in on wet
It is used for sealing movement joints roll form • Excellent adhesion on multiple
in concrete pavements such as surfaces - Concrete, Metal, Wood &
highways, airport runways, docks and CERA MEC SS FIX Epoxy based adhesive Glass
container depots. for fixing CERA MEC STRIPSEAL Coverage: 6 m / 600 ml for 10 * 10
mm groove
Coverage: Q = (1.6 x L x W xD)/1000 Coverage: 0.5 m / Kg
Where Q = Quantity in kg, L = Length Packing: 0.600
of joint in meters, W = Width of joint Packing: 6 & 2
in mm & D = Depth of CERA SEAL EP High modulus, two-
joint in mm. CERA SWELLMAX STRIPSEAL component, epoxy based sealant for
Bentonite modified rubber water industrial joints subject to heavy
Packing: 4 ,& 1 stopper. loading and abrasion throughout high
CERA SEAL PU LM 1500 Low modulus • No overlapping required and low temperature conditions.
single component PU sealent. • Ecological and user friendly system • High performance in extreme
• UV resistance • Good expansion in controlled conditions
• High performance under high and fashion • Movement accommodation of %10
low temperature condition • Resistance against hydrostatic • Fuel, oil, hydraulic fluid and
• Excellent adhesion and high bond pressure abrasion resistant
strength to the substrate It is recommended to be used for cold • Excellent weather resistance
It can be used for expansion joints in joints and construction joint on all • Stable in high temperature and high
heavy and light prefabricated concrete structures that need humidity conditions
building, concrete and masonry protection from water/moisture • Excellent application characteristics
structures and sealing joints in facade ingress in areas such as underground
panels, curtain walls, joints between structures, basements, tunnels, new Coverage:Volume : 1.2 kg/Litre
frame and pre-frame, etc., and old concrete, etc.
Packing: 3.3
Coverage: 6 m / 600 ml for 10 * 10 Coverage: NA
mm groove
CERABOND SILICO CONSTRO Single
Packing: 0.600 component, neutral curing, ready to
use, Hybrid Polymer based sealant
adhesive with permanent elasticity.
CERABOND SILICO CONSTRO complies
with the ISO 11600 –F class 25 HM
and was awarded an ATG & SNJF
label.

MARBLE RENEWAL & STONE CARE PRODUCTS

CERA AGER Impregnating sealer for all EXCLUSIVE FOR PAVER INDUSTRY • Excellent crack filling property with
natural stones. It is suitable for high strength
professional, commercial & domestic CERA TILE GUARD AF AM 910 • Transmits compressive, shear and
use. Offers weather & stain System having thin film, high gloss tensile stresses between the segments
protection. This sealer penetrates into finish with excellent weathering
the surface and crystallizes to form a performance characteristics. Used Coverage: 7 - 6 Sqm / kg / coat
strong matrix and protects the stone extensively in protecting the tiles
against oil and water based. of various porosities with moderate Packing: Standard packing is 6 & 1
• Excellent UV resistance UV resistance, anti chalking and kg including Component A (Base)
• Keeps the surface non-slip anti-fading properties which and Component B (Hardener)
• Excellent penetration property provides a smooth, durable finish
• Extends the life of natural stones that has good resistance to CERA MARBO BOND ULV Multipurpose
• It enhances the colour of the stones corrosion, abrasion and chemical ultra low viscous, 2K, epoxy system
• Performs both indoors and outdoors exposure also along with excellent specially designed for marble renewal
• Reduces staining and grime build up hydro-phobic properties. Applied as industry. It is well engineered to
• Lower the risk of cracking and two coats, gives excellent densify and strengthen all natural
flaking protection to the stone substrates stone and cement system.
with excellent anti-fungal and anti • Easy application
Coverage:Unpolished stones- 35 - 25 -mose properties and enhance the • Excellent mechanical and
sqm/Ltr beauty of the natural stones compressive strength
Polished stones- 50 - 40 sqm/Ltr • Indefinite recoatability • Excellent crack filling property with
• Excellent flow characteristics - high strength
Packing: 20 ,1 & 0.500 ,0.250 allows smooth application by spray, • Excellent bond strength even when
sponge or roller stress is transmitted
CERA SUPER SEALER Solvent-based • Moderate weatherability • Ultra low viscosity helps in superior
deep penetrating sealer designed for • Good impact resistance penetration and densification
use on marble, limestone, granite, • Moderate resistance to corrosion, • Transmits compressive, shear and
porcelain tiles, slate, terrazzo, clay abrasion and chemical exposure tensile stresses between the segments
and other natural stones to increase • Available in clear and pigmented Coverage: 8 - 7 Sqm / kg / coat
the water impermeability of the coatings
surface. Packing: Standard packing is 6 & 1
• Easy to use Coverage: 3.5 - 2.5 Sqm / kg / coat kg including Component A (Base)
• Transparent colour and Component B (Hardener)
• Good impermeability Packing: 10 ,1 & 0.500 ,0.300
• Allows concrete to breathe CERA MARBO BOND RPA Dual
• Improves dust proofing CERA MARBO BOND Multipurpose low purpose 2K epoxy adhesive and
characteristics viscous 2K epoxy system specially repairing compound specially
• Reduces stain and improves designed for Marble Industry. It can designed for Marble Industry.
resistance be used as an adhesive, crack filling, • Easy application
• Prevent ingress of waterborne and as a bonding agent. It is very easy • Excellent bond strength
chlorides and sulphates to apply for strengthening natural • Hardens without any shrinkage
• Penetrates deep inside the surface stones. • Excellent resistant to high
and imparts excellent hydrophobicity • Easy application temperature
• Non-sagging property • Excellent mechanical and
Coverage: 3.5 - 2.5 Sqm / kg / coat • Excellent bond strength compressive strength
• Hardens without any shrinkage • Transmits compressive, shear and
Packing: 10 ,1 &0.500 ,0.300 • Excellent mechanical and tensile stresses between the segments
compressive strength
• Low viscous epoxy adhesive which Coverage: 6 - 5 Sqm / kg / coat
penetrates deep and strengthens the
stones Packing: Standard packing is 6 & 1
kg including Component A (Base)
and Component B (Hardener)

MARBLE RENEWAL & STONE CARE PRODUCTS

CERA MARBO BOND 2 180K low viscous Coverage: 3.5 - 2.5 Sqm / kg / coat CERA AQUAMER-CWB Fluro carbon
adhesive which is uniquely designed based stain & water repellent
with increased pot life of 180 mins. It Packing: 1 impregnating system which can be
is specially designed to suit the diluted with water, to promote
specific requirement of longer pot life CERA MALTO MAX DUAL X Single hydrophobic properties in concrete,
in honey comb grid adhesive component water based, effective natural stones, artificial stones and
application. barrier coat formulated to impart masonry.
• Easy application anti-efflorescence properties to the • Exhibits excellent water repellant,
• Non-sagging property back of marbles, granites, artificial ant-ifungal and anti-alkali properties
• Excellent UV resistant stones & vitrified tiles of absorbent • Colorless, transparent and resistant
• Excellent bond strength materials. to UV radiations
• Hardens without any shrinkage • Promotes anti-efflorescence and • Reduced staining and efflorescence
• Extended pot life of 180 mins anti-bacterial properties • Excellent dirt repelling
• Excellent mechanical and • Prevents formation of surface characteristics
compressive strength streaks and stains • Resistant to rain, humidity and heat
• Low viscous epoxy adhesive which • Imparts permanent protection to • Resistant to freezing and thawing
penetrates deep and strengthens the marbles, granites and artificial stones
stones • Maintains tackiness and ensures Coverage:200 – 150 Sqft / kg
• Transmits compressive, shear and high bond strength
tensile stresses between the • Resistant to UV radiation Packing: 10 & 5
segmentscompressive strength • Reduced staining and dust proof
• Excellent dirt repelling
Coverage: 7 - 6 Sqm / kg / coat characteristics
• It does not form surface film and
Packing: Standard packing is 6 & 1 allows the treated surface to breathe
kg including Component A (Base) • Excellent penetration to porous
and Component B (Hardener) surfaces

CERA STONEMER Impregnating sealer Coverage:200 – 150 Sqft / kg
for all natural stones. It is suitable for
professional, commercial & domestic Packing: 5 & 1
use. Offers weather & stain
protection. This sealer penetrates into
the surface and crystallizes to form a
strong matrix and protects the stone
against oil and water based stains.
• Excellent UV resistance
• Keeps the surface non-slip
• Excellent penetration property
• Extends the life of natural stones
• It enhances the colour of the stones
• Reduces staining and grime build up
• Performs both indoors and outdoors
• Lower the risk of cracking and
flaking

CERA FIBER GLASS MESH High CONSTRUCTION NEEDS TILE SPACER
performance mesh with specially • Uniformly mixed throughout CERA TILE LEVELING
treated filaments to suit various concrete and becomes an integral part CERA VACUUM LIFTER
applications in the construction of concrete TILE JOINT CLEANING KNIFE
industry. It is widely used to control • Concrete gains additional strength RUBBER HAMMER
shrinkage cracks in cementations • Substantial reduction in cracks
system during its hydration period • Ideal for seismic design and high
and also imparts high abrasion and strength concrete
impact resistance. Coverage:NA
• Increase in strength
• Substantial reduction in crack Packing:0.100 gm & 10
formation
• Increased adhesion and imparts high CERA GEO TEXTILE MEMBRANE
abrasion and impact resistancet Ultra-light staple polyester nonwoven
• Mitigates the explosive tendency of reinforced with glass filaments. The
concrete during fires combination of the flexibility of
• Safe, easy to use and cost effective polyester with the stability of glass
• Resistant to basic chemicals and not only allows excellent run ability of
withstands high alkaline conditions the nonwoven, but also gives
• Environment friendly and outstanding dimensional stability and
non-hazardous resistance over time.
• Rot-proof • Better durability
• High flexibility
Coverage:NA • Good elongation at break (> %20)
• High resistance to stress/strain
Packing: 145 gsm, 6 ,4 inch, 1 m in cycles
roll form • High resistance to static punching
• Good thermal stability
CERA PVC WATER STOPPER Specially
developed, uniquely designed CERABOND TAPE BT Air and
multipurpose PVC water stopper watertight band used between parts of
having ribs on surface to ensure water heavy constructions or curtain walls.
tightness, used for construction Other applications are chimney
joints. coating, roof-combs, and porches.
• Excellent inherent elasticity When used as watertight sealant, it is
• Resistant to waterborne chemicals necessary to ensure that there is no
• Range of profiles to suit every need risk of water retaining.
• Simple on-site jointing
• Excellent elongation Coverage:NA
• High tensile strength
Packing: Width 50 mm & 100 mm
Coverage:NA
TILE TRIM
Packing: 4150 mm X 5 mm thickness
in roll form PVC TILE TRIM ( SIZE - ١٠mm x ٢٫٤٠M, ١٢mm x ٢٫٤٠M )

CERA FIBRE MIX tHigh performance COLOUR - SHINING BLACK COLOUR - BROWN COLOUR - SHINING BROWN
multi filament polypropylene based
secondary reinforcement fibre for ALUMINIUM TILE TRIM ( SIZE - (١٠mm x ٢٫٤٠M )
better and durable concrete.
• Easy to use
• Uniform 3 dimensional
reinforcement

COLOUR -SILVER COLOUR - GOLD COLOUR - WOOD FINISH

An ISO ۲۰۱٥ : ۹۰۰۱ Certified Company

No. ۹, First Cross Street, Sterling Road, Nungambakkam, Chennai – ٦۰۰۰۳٤.
Tel: ٤۲٦٥٤٥۲٥ ,٤۲٦٥۲٤٥٤ ,۰٤٤٤۸٦۸٤٥۲۳
Email: corporate@cerachemindia.com
www.cerachemindia.com

Customer Care: ۲٦٦۰٤۸٦٥ ٤٤ ۹۱+