i-LeD_Downlights_2015_EN

Code composition: type + colour + optic

HV54_RS Downlight AC LED Ø130 10W A.C. IP54 IK05
60
type 10W colour 10W optic
3 White
96883 Natural 1000 lm CRI 80 N Diff. 00
Black Warm 950 lm CRI 80 W
96884 Super W 903 lm CRI 80 M

Ø130 Ø121

HV54_RS Downlight AC LED Ø180 20W A.C. IP54 IK05
71
type 20W colour 20W optic
3 White
96885 Natural 2000 lm CRI 80 N Diff. 00
Black 96886 Warm 1900 lm CRI 80 W
Super W 1805 lm CRI 80 M

Ø180 Ø167

HV54_RS Downlight AC LED Ø210 30W A.C. IP54 IK05

81 type 30W colour 30W optic
3 White
96887 Natural 3000 lm CRI 80 N Diff. 00
Black 96888 Warm 2850 lm CRI 80 W
Super W 2710 lm CRI 80 M

Ø210 Ø197

51Downlights_2015

HV line Downlights In this picture 96893

HV54_QS Light management:
casing and optical compartment
IP54
made of aluminium
Passive heat dissipation:
extruded aluminium heat sink

Minimalist sturdiness:
thin and resistant polycarbonate
flange with powder-coated finish

sturdy opalescent cover

dir ect 190-250 V A

C

Wall Grazing FOL High CRI Rational Design

Lighting fixture dimmable by means of (electronic) phase-
cut dimmer specific for LEDs.

We recommend using the following devices:

•Eltako EUD61NPN-UC (CODE: KIT0027) 60
•Relco DIM LED 34 D..

123

52 Downlights_2015

Code composition: type + colour + optic

HV54_QS Downlight AC LED 130 10W A.C. IP54 IK05
56
type 10W colour 10W optic
3 White
130 115 96889 Natural 1000 lm CRI 80 N Diff. 00
Black Warm 950 lm CRI 80 W
HV54_QS Downlight AC LED 170 20W 96890 Super W 903 lm CRI 80 M
3 66
170 155 A.C. IP54 IK05

HV54_QS Downlight AC LED 200 30W type 20W colour 20W optic
78 White
96891 Natural 2000 lm CRI 80 N Diff. 00
3 Black 96892 Warm 1900 lm CRI 80 W
200 185 Super W 1805 lm CRI 80 M

A.C. IP54 IK05

type 30W colour 30W optic
White
96893 Natural 3000 lm CRI 80 N Diff. 00
Black 96894 Warm 2850 lm CRI 80 W
Super W 2710 lm CRI 80 M

53Downlights_2015

54 Downlights_15

55Downlights_15

The safety guaranteed by a constantly present light

The i-LèD electronics research laboratories have developed downlights fitted with the EMergency kit to guarantee power supply during both
normal and emergency functioning, i.e. in the event of mains supply failure. This kit includes the downlight, with the relevant LED indicator
integrated in the reflector, driver and batteries to provide power supply. The result is a maintained emergency luminaire, extremely useful in any
environment where an emergency lighting system is not required. Homes, shops and small offices will be safer in the event of power outage,
without the need to install specific luminaires and keeping the aesthetic concept unaltered. All the downlights included in this catalogue can be
fitted with the EMergency kit upon request.

Technology

The downlight with EMergency kit is designed in compliance with the EN 60598-2-22 standard and allows:
• to recharge the battery pack in a maximum of 6 hours
• to connect a switch for the passage from maintained lighting (emergency lighting on with normal mains voltage) to non-maintained lighting
(emergency lighting off with normal mains voltage)
• to supply a maximum power of 6 W during emergency operation
• to switch on immediately in case of mains voltage failure
• to switch to the “Stand-by mode” by means of a N.O. button (which can also be used to switch off and on the LED luminaire during emergency

operation; when mains voltage is resumed, the system will get ready for a new emergency event)

Battery

The system is fitted with a high-temperature Ni-MH battery pack, compliant with the EN 61951-2 standard, having the following characteristics:
•over 1-hour duration
•environmentally friendly as it does not contain cadmium
•constant operation also at high temperature (50° C)

•guaranteed minimum life: 4 years with average use or after approx. 500 charge/discharge cycles

Complete protection

The electronic system guarantees the following protections:
•Surge protection
•Overtemperature protection
•Protections against overcharge and overdischarge of the battery pack to
guarantee the battery life cycle

LED indicator

Each article features a green LED indicator having the following
meanings:
•ON: mains voltage present and battery charged
•FLASHING BRIEFLY: mains voltage present and battery charging
•FLASHING QUICKLY: a fault has been occurred
•OFF: Mains voltage failure (emergency lighting)

56 Downlights_2015

OFF ON

Downlight with EMergency kit (upon request)

Downlight with LED indicator

Three modes of operation Battery
Driver EMergency
“SAFE” mode
“SAFE” mode
The I1 switch allows all LED lights to be switched on and “S.E.” mode
off. All luminaires connected to the EMergency kit switch “S.A.” mode
on only in the event of failure of mains voltage in the electric
board.

“S.E.” mode

The EMergency kit allows the non-maintained operation
mode: the LED lamp connected to the KIT switches on only
in the event of power supply failure, otherwise it is always
switched off. The I1 switch allows the LED lamps connected
to the remaining LED power supply units to be switched on
and off.

“S.A.” mode

The EMergency kit allows the maintained operation mode:
the LED lamp connected to the kit is always switched on
with normal power supply.
The I1 switch allows the LED lamps connected to the
remaining LED power supply units to be switched on and off.

57Downlights_2015

Electronics

Constant Current ON/OFF Controlgears 59 The i-LèD research and development laboratories in the electronic
1/10V Controlgears 60 field have created a driver family offering operating reliability and a
DALI Controlgears 61 higher protection to all the brand articles.

A complete offer for lighting power supply and management
ranging from the simple switching on to the DALI protocol, through
DMX and 1-10 V, to end with emergency lighting solutions.

Smartwave™

Smartwave™ immunity Smartwave™ control
against surges unit chip

Protectionagainst surges

The electronic devices integrity and operation are often damaged as a result of surges in the mains voltage. They are common in several countries
and can of course affect any type of building. Surges may be due to load switching in the electrical system, lightning strikes directly hitting the
system or the areas surrounding it or other types of accidental phenomena. LED lighting fixtures present an extremely long life and are fitted with
protection systems that increase their reliability over time. Nonetheless, in the majority of the cases, lighting system malfunctioning is the result of
a clearly higher failure rate and of the damaging of drivers.

The i-LèD research and development laboratories in the electronic field have created Smartwave™: a higher protection that guarantees a
longer life to the power supply systems (50˙000 hours) preventing the surge from reaching and damaging the lighting fixture connected to it.
This is combined with a high efficiency level and a power factor exceeding 0.9: it allows for up to 100 W to be saved per each system with a
total saving of 1 kW. Moreover, Smartwave™ introduces structural changes aimed to improve energy performance and reliability. The number of
components has been reduced, thus lowering the operating temperature. A high PF value entails optimal correction also in the case of systems
with many drivers. The thermal cut-off protection is combined with a temperature-controlled power derating protection against overtemperatures
that enables operation also with temperatures exceeding 50° C. Additionally, the drivers of the Smartwave™ family feature a wide input voltage
range and are absolutely noiseless.

The international and European standard IEC/EN 61547 requires the manufacturers to guarantee an immunity against surges defined by the
withstood voltage peak calculated in kV (beyond which the device no longer works properly). The tests carried out according to the IEC 61000-4-5
standard define for the safety class II or III devices installed indoor the following differential mode surge levels (surges between phase and phase
or between phase and neutral of the mains):

- 0.5 kV for devices with power lower than 25 W
- 1 kV for devices with power higher than 25 W

The i-LèD laboratories have developed the Smartwave™ range drivers with an immunity to differential mode surges up to 7 kV, a value which
is 4 times higher than the minimum protection requirement provided for by current regulations.

58 Downlights_2015

BIT 230V AC 6W LED controlgear C.C. IP40

range output input efficiency PF surge

COB44 6W 700 mA 9V DC 100~250V AC 0,13/0,07A 80% 0,5 C 0,5 kV 99243

38 • Instantaneous output current limitation to protect LED upon switching on

79 • A switch may be installed along the output line
22,5
• Self-restoring protection against overtemperature, overload, open circuits
88 and short circuits on the output line

SIMON 230V AC 13W LED controlgear C.C. IP40

range output input efficiency PF surge

LV54 13W 350 mA 36V DC 180~300V AC 0,13 A 89% 0,9 C 4 kV 99260

134 • Smartwave™: optimum efficiency, long life, surge protection, high PF

37 • Self-restoring protection against overtemperature, overload, open circuits
141 and short circuits on the output line
30,3
149

LEON 230V AC 15/23/25/30W LED controlgear C.C. IP40

range output input efficiency PF surge

COB20/65 15W 400 mA 37V DC 180~300V AC 0,15 A 90% 0,95 4 kV 99113
4 kV 99261
LV54 23W 630 mA 36V DC 180~300V AC 0,15 A 90% 0,95 4 kV 99112
4 kV 99093
COB20/65 25W 720 mA 37V DC 180~300V AC 0,15 A 90% 0,95

COB20/65 30W 840 mA 37V DC 180~300V AC 0,15 A 90% 0,95

LV54 30W 840 mA 36V DC

58 • Smartwave™: optimum efficiency, long life, surge protection, high PF
103
• Self-restoring protection against overtemperature, overload, open circuits
and short circuits on the output line

27

CLERK 230V AC 40/50W LED controlgear C.C. IP40

36 160 range output input efficiency PF surge
70
COB20/65 40W 1,05 A 37V DC 180~300V AC 0,25 A 92% 0,96 6 kV 99252
6 kV 99092
COB20/65 50W 1,25 A 37V DC 180~300V AC 0,25 A 92% 0,96

LV54 44W 1,25 A 36V DC

• Smartwave™: optimum efficiency, long life, surge protection, high PF

• Self-restoring protection against overtemperature, overload, open circuits
and short circuits on the output line

59Downlights_2015

ELECTRONICS Constant Current C.C. IP40

BOSON 230V AC 13/15/23W 1-10V Dimmable multicurrent LED controlgear

range output input efficiency PF surge

LV54 13W 350 mA 36V DC 190~250V AC 0,15 A 87% 0,6 C 4 kV 99262
99116
LV54 23W 630 mA 36V DC

COB44 6W 630 mA 36V DC

COB20/65 15W 400 mA 37V DC 190~250V AC 0,15 A 87% 0,6 C 4 kV

24,4 210 • Dedicated controller for choosing the intensity of the output current
48,2 • Self-restoring protection against overtemperature, overload, open circuits

and short circuits on the output line
• Settings controlled via 1-10V interface, potentiometer or N.O. button
• Possibility of connecting up to 50 drivers (through Sync bus)

62

12

QUARK 230V AC 25/30/40/44/50W 1-10V Dimmable multicurrent LED controlgear C.C. IP40

range output input efficiency PF surge

COB20/65 25W 720 mA 37V DC 190~250V AC 0,15 A 86% 0,95 7 kV 99130
99253
COB20/65 30W 840 mA 37V DC 7 kV

LV54 30W 840 mA 36V DC

COB20/65 50W 1,25 A 37V DC

LV54 44W 1,25 A 36V DC

COB20/65 40W 1,05 A 37V DC 190~250V AC 0,15 A 86% 0,95

208 • Settings controlled via 1-10V interface, or potentiometer
40
• The output current intensity can be selected by means of a jumper
89
• Self-restoring protection against overtemperature, overload, open circuits
and short circuits on the output line

196,7

62

2

Eltako EUD61NPN-UC Universal Dimmer Switch
Electronic phase-cut dimmer specific for LEDs. Ideal for dimming HV downlights.

input 190~250V AC 0,15 A

max load 350W

control PUSH-DIM

45 working temperature from -20° C to +50° C

IP IP20

18 45 weight 30g
CODE KIT0027

60 Downlights_2015

PHOTON 230V AC 13/15/23W DALI / Simply DIM Dimmable multicurrent LED controlgear C.C. IP40

range output input efficiency PF surge

LV54 13W 350 mA 36V DC 190~250V AC 0,15 A 87% 0,6 4 kV 99114
99131
COB44 6W 630 mA 37V DC

LV54 23W 630 mA 36V DC

COB20/65 15W 400 mA 37V DC 190~250V AC 0,15 A 87% 0,6 C 4 kV

24,4 210 • Settings controlled via DALI or 1-10V interface or Simply DIM
48,2 • Dedicated controller for choosing the intensity of the output current
• Self-restoring protection against overtemperature, overload, open circuits

and short circuits on the output line
• Optimisation of the DALI signal transmission (burst immunity 4 kV)

62

34

SERBAN 230V AC 25/30/40/44/50W DALI / Simply DIM / 1-10V Dimm. LED controlgear C.C. IP40

range output input efficiency PF surge

COB20/65 25W 720 mA 37V DC 190~250V AC 0,2 A 86% 0,95 7 kV 99188
7 kV 99187
COB20/65 30W 840 mA 37V DC 190~250V AC 0,2 A 86% 0,95
7 kV 99254
LV54 30W 840 mA 36V DC 7 kV 99174

COB20/65 40W 1,05 A 37V DC 190~250V AC 0,2 A 86% 0,95
86% 0,95
LV54 44W 1,25 A 36V DC 190~250V AC 0,2 A

COB20/65 50W 1,25 A 37V DC

208 • Settings controlled via DALI or 1-10V interface or Simply DIM
40 • Choice of linear or logarithmic dimming, through jumper
• Optimisation of the DALI signal transmission (burst immunity 4 kV)
89

196,7

62

234

61Downlights_2015

Electronics 2 1-10V

Connection diagrams BOSON
99262
1 i-LèD DIM
BOSON
NORMALLY OPEN BUTTON 99116

BOSON QUARK
99262 99130
99253
BOSON
99116 SERBAN
99188
99187
99254
99174

3 DALI 4 SIMPLY DIM

PHOTON NORMALLY OPEN BUTTON
99131
99114 PHOTON
99131
SERBAN 99114
99188
99187 SERBAN
99254 99188
99174 99187
99254
99174

KEY: 1-10V DALI DA L
ERAL DIM DA SIMPLY DIM N

62 Downlights_2015

Code index

Code index

code product page code product page code product page
COB44_R COB65_Q COB20_R
96801 COB44_R 19 96860 31 97130 23
96802 COB44_RJ 23
96803 COB44_RJ 19 96863 COB65_Q 31 97131 COB20_R 23
96804 COB20_R 23
96805 COB20_R 19 96864 COB65_Q 31 97134 COB20_R 29
96806 COB20_R 29
96809 COB20_R 19 96865 COB65_Q 31 97135 COB20_R 29
96810 COB20_R 29
96811 COB20_R 23 96866 COB65_Q 31 97136 COB65_R 19
96812 COB20_R 19
96813 COB20_R 23 96867 COB65_Q 31 97137 COB65_R 19
96814 COB20_R 19
96819 COB20_R 23 96868 COB65_Q 31 97140 COB65_R 24
96820 COB20_Q 24
96823 COB20_Q 23 96873 COB65_Q 31 97141 COB65_R 24
96824 COB20_Q 24
96827 COB20_Q 23 96874 COB65_Q 31 97396W30 Kit COB44_R 59
96828 COB20_Q 59
96829 COB20_Q 23 96883 HV54_RS 51 97396W60 Kit COB44_R 59
96830 COB20_Q 59
96831 COB20_Q 23 96884 HV54_RS 51 97397W30 Kit COB44_RJ 61
96832 COB20_Q 60
96837 COB20_Q 23 96885 HV54_RS 51 97397W60 Kit COB44_RJ 60
96838 COB65_R 61
96841 COB65_R 23 96886 HV54_RS 51 98441 DIFFUSER 61
96842 COB65_R 61
96845 COB65_R 23 96887 HV54_RS 51 98442 DIFFUSER 61
96846 COB65_R 59
96847 COB65_R 27 96888 HV54_RS 51 98443 DIFFUSER 59
96848 COB65_R 60
96849 COB65_R 27 96889 HV54_QS 53 98444 DIFFUSER 61
96850 COB65_R 59
96855 COB65_R 27 96890 HV54_QS 53 99092 ELECTRONICS 59
96856 COB65_Q 60
96859 27 96891 HV54_QS 53 99093 ELECTRONICS

27 96892 HV54_QS 53 99112 ELECTRONICS

27 96893 HV54_QS 53 99113 ELECTRONICS

27 96894 HV54_QS 53 99114 ELECTRONICS

27 97090 LV54_RS 39 99116 ELECTRONICS

27 97091 LV54_RS 39 99130 ELECTRONICS

27 97092 LV54_RS 39 99131 ELECTRONICS

29 97093 LV54_RS 39 99174 ELECTRONICS

29 97094 LV54_RS 39 99187 ELECTRONICS

29 97095 LV54_RS 39 99188 ELECTRONICS

29 97096 LV54_QS 43 99243 ELECTRONICS

29 97097 LV54_QS 43 99252 ELECTRONICS

29 97098 LV54_QS 43 99253 ELECTRONICS

29 97099 LV54_QS 43 99254 ELECTRONICS

29 97100 LV54_QS 43 99260 ELECTRONICS

29 97101 LV54_QS 43 99261 ELECTRONICS

29 97119 LV54_RS 39 99262 ELECTRONICS

31 97120 LV54_RS 39

63Downlights_2015

The drawings, dimensions, materials and colours
contained in this catalogue are merely indicative.
In the customers’ interest, the Company reserves the
right to modify the models at any time without notice.

Art direction, rendering, still life pictures and prepress:
ERAL / Linea Light Group
Setting pictures:
ERAL / Linea Light Group
Photo-retouching:
ERAL / Linea Light Group
Printed by:
Sincromia
Printed in:
February 2015