Vadsbo

LED-control
selection

2015

Table of contents

LED control gears

LCC8 Junior V-36008235D 3
V-36009277D 4
LCC9sc Synchronization and automatic cascading V-36030609 5
V-36060579 5
LCC30 V-36060579MCM 6
V-36060579WCM 7
LCC60 V-36060SSWQ 8-9
V-40010DCMCMP 10
LCC60MCM Multi Control Module V-40010DCP 10
11
LCC60WCM Wireless Control Module
12
SSW60Q softSwitcher® 60Q 12-13
13
MCMP Multi Control Module Push 13
13
CMP Control Module Push 0/1-10Vdc 13
13
LED control gears and big loads 14
14
EDL-system, Easy DALI LED-control V-40MODOT
About the system V-40PUDOT 15
EDL-system components V-40SWDOT 15
motionDOT V-40SCDOT 15
pushDOT V-30125DALI 15
switchDOT
sceneDOT 16
busDOT 16
EDL-system installations 16
Project Cruse ship M/S Balmoral 16

LED dimmers V-4010020IB 17
UD100 V-4022010IB 17
LD220 V-4044020IB
LD440
LightKey 2015

LED dimmers - Rotary type V-4036020PWM
PWM 360A V-40010A20DC
KED10VDA V-4020020TRL
VD200 V-4060020L
VD600

Du0TM driving and dimming 12Vac LED V-1503520RZ
Zero 35W V-1507020Z
Zero 70W

2 Vadsbo LightTech LED-control Selection

LED control gear LCC8 Junior

LCC8 Junior The saving potential with Box installation

LED control gear LCC8 Junior (V-36008235D) LED control gear
A new addition in Vadsbo’s series of LED control gears. LCC8 Junior
LED control gear LCC8 Junior is a combined LED driver V-36008235D
and LED dimmer in one module for mounting in LED
fixtures or a wall box. Scan for more
Dimmable with retractive switch or 1 -10Vdc control LCC8 information
signal. Designed for 350, 500 and 550mA constant
current LED, max load 8W.

New and easier way to install
LED control gear LCC8 Junior is suitable for installation
into standard wall boxes (wall box installation) behind
the switch and simplifies installation and saves money
compared to central installation.
Central installation option means that the wiring is
done from groups of light fittings and switches to the
central control unit meaning long cables, more material
and more work.

Save money with Box installation Wiring Diagram
With wall box installation of LCC8 Junior you can save
a lot of money compared with central installation on LNS +- LN S +-
cost of materials and labour. Wall box installation me-
ans less cables and simpler electrical circuiting. 1-10 Vdc 1-10 Vdc

Power Range 1-8 W with 3 selectable DC currents ON ON
LED control gear LCC8 Junior with output from 1-8W 21 21
controls the most common constant current LEDs 350
mA along with 500 and 550 mA, selectable via DIP LED LED
switch. LCC8 Junior can not be connected in series.
+- +-
Sync without a sync cable
Up to 20 LCC8 Junior units can be controlled using the
same retractive switch. No extra synchronization cable
is required. The connection takes place on the primary
side by parallel switching the control signal that is
controlled by one or more reactive switches.

Ideal size for build-into LED luminaires
LED control gear LCC8 Junior combines driver and
dimmer in one extremely small unit with diameter 54
mm and height 22 mm. Its wall box shape and small
size is a big advantage in installation. LED control gear
LCC8 Junior is ideally designed for mounting into LED
fixtures where the space for LED-driver and dimmer is
very limited.

LN
220-240 Vac

3 Vadsbo LightTech LED-control Selection

LED control gear LCC9sc

LCC9sc Easy to install with wallbox installation LED control gear
LED control gear LCC9sc is suitable for installation into LCC9sc
LED control gear LCC9sc - now with synchroniza- a standard wall box (box installation) behind the switch V-36009277D
tion and automatic cascading and simplifies the installation and saves money compa-
LED control gear LCC9 which is a patent-pending LED red with central installation. Scan for more
driver and dimmer for LED fixture or wall box has now Central installation option means that the wiring is LCC9sc information
been equipped with features for synchronization and done from light fittings and switches to the central
cascading under the name LCC9sc. control unit meaning long cables, more equipment and Economic comparison
The new LED control gear LCC9sc is equipped with more work. between Box and
new features to sync without a sync cable and auto- Central installation.
matic cascading. LCC9sc drives up to 540W LED and Save time and money with box installation Save the Excel file
controls with one retractive switch. You can save a lot of money with box installation of from the home page.
LCC9sc compared with central installation in costs for
Larger power range by automatic cascade con- materials and labor. Wall box installation means less
nection cables and simpler electrical circuit.
Cascading means series connecting 2 or more units of Up to 540W can be controlled by one swich
LCC9sc to dim loads with higher power requirements
than 9W.
A group of 2 units will drive and dim: 10-18W
A group of 3 units will drive and dim: 19-27W.

Multiple control options
LCC9 can be controlled by push (retractive switch) on
the primary side and by push and 1-10 Vdc signal on
the secondary side

Synchronization
Up to 20 groups (with up to 27W in each group) con-
nected to LCC9sc units can be controlled using the
same retractive switch. No extra synchronization cable
is required.

New sync function on the primary side
You can synchronize up to 20 groups of LCC9sc on the
primary side by parallel connection of the switching
control signal which can be controlled by one or more
retractive switches.

New sync function on the secondary side
With the updated version 3 pcs can be cascaded and
synchronized automatically on the secondary side!

Wide current and voltage range with 7 selectable
DC currents and voltages
LED control gear LCC9sc covers all commonly occurring
currents and voltages such as 350, 500, 700 mA and
6, 9 ,12 and 24 Vdc selectable via DIP switch.

Ideal size for build-in in LED lights
LED control gear LCC9sc has a diameter of 56 mm and
a height of 23 mm. Its box shape and small size is a
big advantage in installation. LED control gear LCC9sc
is thus ideally designed for mounting into LED fixtures
where space for both driver and dimmer is very limited.

4 Vadsbo LightTech LED-control Selection

LED control gearsLCC30 and LCC60

LCC30 LCC60 LED control gear
LCC60
LED control gear LCC30 (V-36030609) LED control gear LCC60 (V-36060579) V-36060579
LCC30 is a perfectly matched LED-driver and LED LCC60 is a perfectly matched LED-driver and LED
dimmer in one unit for bigger LED-loads. It is able to dimmer in one unit for bigger LED-loads. It is able to
sync without a sync cable. With LCC30 you will be sync without a sync cable. With LCC60 you will be
able to drive up to 600W LED and dim the entire load able to drive up to 1200W LED and dim the entire load
from one retractive switch. It will satisfy the highest from one retractive switch. It will satisfy the highest
standards of simplicity, ease of use and thus customer standards of simplicity, ease of use and thus customer
satisfaction. satisfaction.

Wider coverage of current and voltage range Wider coverage of current and voltage range
LED control gear LCC30 covers all commonly occurring LED control gear LCC60 covers all commonly occurring
currents and voltages selectable via DIP switches such currents and voltages and is easily switchable between
as 350, 500, 700 and 900 mA and 12, and 24 Vdc. 350, 500, 700 and 900mA as well as 12 and 24Vdc.

Control options Control options Quick terminals
LCC30 can be controlled by push (retractive switch) LCC60 can be controlled by push (retractive switch)
on the primary side and by 1-10 Vdc signal on the on the primary side and by 1-10 Vdc signal on the
secondary side. secondary side.

Larger power range for constant current diodes Larger power range of constant current diodes
LED control gear LCC30 has larger power range com- LED controller LCC60 has larger power range, in
pared to commonly used options on the market. comparison with commonly used alternatives on the
market.

Diodecurrent LCC30 Other options Sync without a sync cable up to 1200W Snap-lids
Up to 20 LCC60 can be controlled by a retractive
350mA Number of diodes Number of diodes switch that can be forward connected from unit to unit
500mA and requires no external synchronization cable. It is
700mA 1-16 pcs 1W LED 1-12 pcs 1W LED therefore possible to control up to 600W and 1200W
900mA 1-15 pcs 2W LED 1-12 pcs 1W LED LED with one retractive switch.
1-12 pcs 3W LED 1-9 pcs 1W LED
1-7 pcs 4W LED -

Synchronization without sync-cable Simultaneously mixed loads
Up to 20 LCC30 can be controlled by a push button With the aid of common cabling multiple units can
that can be through-connected from driver to driver be synchronized. This means that you can set up one
and requires no external synchronization cable. It is device at 12Vdc, 350mA at another, a third at 700mA
therefore possible to power up to 600W of LED. and get them to run and dim synchronized with a
single switch! You can thus operate and dim LED strips
Simultaneously controlled mixed loads and LED fixtures simultaneously. Regardless of brand.
It is possible to combine constant current fixtures (CC),
constant voltage fixtures (CV) as well as popular LED Unique memory function Insertion of LCC30
stripes on LCC30 and get an overall smooth dimming The unique memory function means that you can turn in a 70 mm hole
by synchronizing the devices only through one push on or off the light with for example motion detectors,
button. twilight switches or timers. If the light is on in a specific
dimmed mode and incoming voltage to LCC60 is
Easy to install in suspended ceiling broken there will be light in the last dimmed mode wit-
LCC30 is equipped with simple through connection hout any additional action by retractive switch when
terminals for mains voltage 230 V as well as push- the power returns.
button control. The enclosure is designed with quick- This also means that, for example, when the fuse
locks on primary and secondary side and is equipped blows at home, light will return directly when the
with sturdy quick connection terminals. Installation in fuse has been restored. At the same time, you do not
suspended ceilings are made possible since LCC30 can have to worry that the light will be on when you come
be entered through a normal 70 mm hole. home from vacation, for example, if in the meantime
there has been a brief power outage.

Individual outputs Scan for more
LCC60 has two outputs that are individually adjustable. LCC30 and LCC60
You can run various LED types with the same control. information

LED control gear LCC30
V-36030609

5 Vadsbo LightTech LED-control Selection

LED control gear LCC60MCM

LCC60MCM Unique memory function

Combined LED-driver and dimmer for DALI, DMX The unique memory function
and Push
LED control gear LCC60MCM (V-36060579MCM) is a means that you can turn on/
perfectly matched LED-driver and LED dimmer in one
unit for multiple control options and bigger LED-loads. off the light with for example
It is able to sync without a sync cable. With LCC60 you
will be able to drive up to 1200W LED and dim the motion detectors, twilight
entire load from one retractive switch. It will satisfy the
highest standards of simplicity, ease of use and thus switches or timers. If the light LCC60MCM
customer satisfaction. is on in a specific dimmed V-36060579MCM
mode and incoming voltage
Multiple Control options
LCC60MCM can be controlled by push (retractive to LCC60MCM is broken
switch) on the primary side and by 1-10 Vdc signal
on the secondary side as well as with DALI and DMX there will be light in the last dimmed mode without any additional action by
signals.
retractive switch when the power returns. This also means that, for example,
DALI and DMX
LCC60MCM which is equipped with Multi control mo- when the fuse blows at home, light will return directly when the fuse has been
dule MCM can be controlled by DALI and DMX.
The two outputs in the LCC60MCM can in a bus restored. At the same time, you do not have to worry that the light will be on
system be controlled individually. Each outlet can dim
different types of LED. LCC60MCM gives a precise and when you come home from your vacation, if there in the meantime there has
accurate dimming. You can via the bus system choose
exactly the dimmer level. In a bus system where two- been a brief power outage.
way communication is supported it is possible to read
the status of for example, the current voltage and cur- Individual outputs
rent, or error status such as short circuit or if no load is LCC60MCM has two outputs that are individually addressable.
connected. You can run various LED types with the same control gear.

Wider current and voltage range Individually addressable outputs
LED control gear LCC60MCM covers all commonly In a DALI or DMX environment the two outputs of LCC60MCM can be
occurring currents and voltages and is easily switchable individually addressable by lighting group and by control unit.
between 350, 500, 700 and 900mA as well as 12 and
24Vdc. Loop-in/Loop-out Scan for more
Double terminals for quick and easy forwarding of MCM information
Larger power of constant-current diodes phase, neutral and guide wire. Up to 20 units with a
LED controller LCC60MCM has a larger power range, total power of 600W and 1200W can easily be control-
in comparison with commonly used alternatives on the led by a retractive switch. The units are connected
market. together with standard installation cable via the extra
control input. No special sync cable is required.
Sync without a sync cable up to 1200W
Up to 20 LCC60MCM units can be controlled by a Designation LCC60MCM
retractive switch that can be forward connected from Item number
unit to unit and requires no external synchronization Constant current V-36060579MCM
cable. It is therefore possible to control up to 600W (per output)
and 1200W LED with one push button. 350mA (2-57V) 1-20W (1-16 psc LED Vf=3,6)
Constant voltage 500mA (2-52V) 2-26W (1-14 psc LED Vf=3,6)
Simultaneously mixed loads (per output) 700mA (2-42V) 2-30W (1-12 psc LED Vf=3,6)
Common cabling allows multiple units to be synchroni- Number of outputs 900mA (2-24V) 4-21W (1-6 psc LED Vf=3,6)
zed. This means that you can set up one unit at 12Vdc, Dimming
another at 350mA and a third at 700mA and get them Bus control MCM 12Vdc 10,5W
to run and dim synchronized with a single push but- Voltage primary 24Vdc 21W
ton! You can therefore run and dim LED strips and LED Ambient temp. max (Ta)
luminaires simultaneously. Whatever the brands! Test temp. (Tc) 2
Dimension (LxWxH)
Degree of protection Pushbutton, 1-10V, DALI, DMX

Yes

220-240Vdc

+50°C

+75°C

220x62x34 mm

IP20

6 Vadsbo LightTech LED-control Selection

LED wireless control gear LCC60WCM - via Bluetooth

LCC60WCM LCC60WCM
V-36060579WCM
Combined LED-driver and dimmer using
wireless Bluetooth technology
Based on the popular LCC60 series LED-driver,

the WCM option (V-36060579WCM) adds wireless
control features based on the standard Bluetooth 4.0
protocol found in most modern smartphones and
tablets. With app support for the latest Android and
Apple’s iOS you can utilize any device to take full
control over all you luminaires.

Limitless range setup of any installation, from residential to large-scale commercial complexes.
By using MESH network technology you only need to With the LCC60WCM, any combination of CV and CC LED luminaires can be
be within range (normally 100m) of any single control mixed and controlled
gear to have control over all the luminaires in your from the same simple intuitive interface using your favorite device.
installation. Communication is automatically forwarded
between control gears to all other control gears within Controlling
its range. Because of the MESH technology you can Simply 1) take a picture of the different lighting groups in your installation,
build large scale installations of thousands of lamps your living room, conference room etc., 2) then combine it with the app to tie
and control them all from your smart phone. the scenarios and grouping via photo. You can now take control of the lighting
groups by 3) touching individually on the screen the lighting/lamps you want to
Group and scene settings control on/off or dim etc.
Group any number of luminaires together in the app
and dim them simultaneously e.g. to dim a single
room or all spotlight luminaires in an installation.
Program pre-set scenes easily using the app’s intuitive
interface for fast setting of entire scenes throughout
your installation. Unlimited group and scene settings
provide uncompromising control over any installation
type.

Retractive switches for local control
Connect a retractive switch to any control gear for
local control over a single luminaire or a group of
luminaires. The switch’s behavior can be customized
through the app to fit any type of installation scenario.

Access control Designation LCC60WCM
The LED control gears are paired to a master device Item number
first time they are used. The master device can then Constant current V-36060579WCM
optionally share access permissions with any num- (per output)
ber of devices either using a password or leaving the 350mA (2-57V) 1-20W (1-16 psc LED Vf=3,6)
network open for access by any device. The internal Constant voltage 500mA (2-52V) 2-26W (1-14 psc LED Vf=3,6)
communication of the network is protected by a strong (per output) 700mA (2-42V) 2-30W (1-12 psc LED Vf=3,6)
asymmetrical-key encryption scheme. Number of outputs 900mA (2-24V) 4-21W (1-6 psc LED Vf=3,6)
Dimming
Two channel control gear and Color-Shift Voltage primary 12Vdc 10,5W
The LCC60’s versatile capability of two independent Ambient temp. max (Ta) 24Vdc 21W
LED-drive channels providing up to 30W of power each Test temp. (Tc)
can be utilized either to control two LED strings inde- Dimension (LxWxH) 2
pendently or a single string of color-shifting luminaires. Degree of protection
Combined with Vadsbo’s latest color-shifting luminaire Bluetooth, smartphone/tablet, retractive switch
it provides seamless dimming between 2700K and
5700K maintaining a high quality light throughout the 220-240Vdc
entire spectrum. This enables dynamically shifting il-
lumination settings for a wide variation of installations. +50°C

Flexibility +75°C
The LCC60’s ability to power a wide variety of LED
luminaires is now combined with the market’s most 220x62x34 mm
versatile wireless control system provides the easiest
IP20

7 Vadsbo LightTech LED-control Selection

The softSwitcher® technology

Dynamic interaction • Synchronized and dynamic adjustment of switch-
A radically new technology for the design of LED-driv- ing patterns in the driving circuitry results in over-
ers where hardware is substituted with intelligent soft- all reduction of unwanted EMI-disturbances.
ware algorithms controlling the switchingpatterns in
dynamic interaction with each other and the hardware • Less stress imposed on (less) hardware components
to control and optimize every aspect of a LED-driver or means >10 times longer life time of drivers.
control gear in relation to the load.
• Intelligent software using microcontrollers means
Characteristics of the softSwitcher® technology limitless control options including 0-1/10 VDC,
• Energy conversion using less hardware means less DALI, DMX, pulse-switching, phase-angle control,
remote controls such as Wifi, Zigbee, Bluetooth etc.
weight and smaller physical size of drivers.
• Possible software features allowing remote
• Enhanced utilization of electrical components Internet-based control of the driving circuitry,
leading to higher efficiency (up to 90%) over the where the driving circuitry is given an IP-address for
entire output range means increased energy sav- updating of the software to meet new demands.
ings.
• Possible seamless stepping between current con-
• Improved powerfactor up to 0,99 means less en- trol and pulse-width modulation means high color
ergy waste and improved environmental footprint. accuracy of the LED.

• Intelligent patent pending coupling of converter • Scalable technology with customizable features
components means near zero stand-by energy means short time to market for new projects.
consumption in drivers.

Switcher T

PATEN
tfos soft PPPAEETNNEDDNII T
softSwitcher® SSW60Q - V-36060SSWQ GN NG
technology. SSW60Q is gtheearfsirastndpriosdauwcthooflltyhSewneedSxwitshi-tcher
LED control gear SSW60Q generation LED control
SSW60Q (V-36060SSWQ) is a combination of LED-
driver and LED dimmer in power of up to 60W on developed product.
two outputs. It is suitable for large indoor installations
such as office, retail, hotel or conference rooms. And SSW60Q is designed to fit all LED loads on the market.
it is ideally suited for demanding lighting needs in all
locations. It is designed to be simple and quick to install.

Quick terminals and fast-lids ensure that installation is This means that SSW60Q is optimal to use for everyth-
quick. DIP switches allow the same LED control gear to
work on all commonly occurring LEDs where each out- ing from 12Vdc (60W) LED strips to fixtures operated SSW60Q
put can be set individually. Primary side and secondary on 2600mA.
side located on opposite sides separate low voltage
cables from from 230V cables in an installation. Built with digital technology the size of the product is
optimized in a way that has never been possible before
LED control gear SSW60Q is a combination of LED in larger power classes. The only limitation contained in
driver and LED dimmer executed in revolutionary digital SSW60Q is that the maximum load is 60W.
Generation-wise SSW60Q can be compared with the
step from the phone with dial to the smartphone.

8 Vadsbo LightTech LED-control Selection

LED control gear softSwitcher® SSW60Q

1) Four different control options 2) DIP switches for Cover suited for Standard cover
setting of LED type flexible hose
• The retractive switch on the primary side,
per channel or joint (factory setting) 3) Quick-terminal lid

• Phase-dimming by trailing edge technology for 3) Quick terminals 5) SSW60Q is suitable for mounting
conventional dimming 4) Loop-in/Loop out e.g. in suspended ceilings with 70 mm
connections downlight holes
• 0/1-10Vdc dimming
• External sensor connection for twilight switches Designation SSW60Q
Item number
or time relays Constant current V-36060SSWQ
(per output)
2) DIP Switch 350mA max 21W 900mA max 54W
Constant voltage 500mA max 30W 1050mA max 60W
Using the DIP switch allows you to set the type of (per output) 700mA max 42W 2600mA max 60W
LED you want to dim. SSW60Q has two adjustable
outputs. Number of outputs 6Vdc 15W (paralleled outputs 2x15 = 30W)
Selectable constant currents (mA) Dimming 12Vdc 30W (paralleled outputs 2x30 = 60W)
150, 350, 700, 1050, 1400, 2600, etc. Voltage primary 18Vdc 47W
Ambient temp. max (Ta) 24Vdc 60W
Selectable constant voltage (Vdc) Test temp. (Tc) 48Vdc 60W
6, 12, 24, 36, 48, etc. Dimension (LxWxH)
Degree of protection 2
3) Quick-terminals and lids
1-10Vdc, phase angle-, push control, presence sensor
Quick-terminals and fast-lids with strain relief for easy
connection. SSW60Q is also provided with additional 230Vdc
cover for rapid engagement of for example 16 mm
hose. +55°C

4) Loop-in loop out connection +75°C

Dual terminals for quick and easy forwarding of 173x53x28 mm
phase, neutral and guidewire. Up to 20 units for a
total of 1200W can easily be controlled by one push IP20
button. The units are interconnected with standard
installation cable via the external control input. No
special sync cable required.

5) Size

SSW60Q is easy to mount in the ceiling, due to its
small dimensions. Enters a 65-70mm downlight hole.

6) Memory Function

Equipped with a memory function that also persists
after power failure. The latest dimmed level is
memorized even if the light was on or off.

7) Support of motion detector/ twilight relay/ timer

The unique memory function enables switching on
and off of the light with eg motion detectors,
twilight relay or timer.

8) Screw Mounting

Holes for screw mounting to a wall or similar.

9) Features and protection

• Soft start, memory function
• Supports motion detectors, twilight relays and timers
• Overvoltage and overtemperature protection
• Short circuit protection with automatic reset

9 Vadsbo LightTech LED-control Selection

Multi Control Module Push and Control Module Push 0/1-10Vdc

MCMP CMP 0/1-10Vdc

Dimmable LED control gears and dimmable ECGs are Push-button control module 0/1-10Vdc is a new push button dimmer which
given advanced bus functions with MCMP. aims to facilitate dimming of dimmable electronic ballast, LED control gears and
Multi Control Module Push MCMP supplies all opera- electronic transformers with 1-10Vdc input. The unit is made in box shape and
ting units for lighting that is 0-10 or 1-10Vdc control can easily be placed in a junction box behind a push button.
with advanced bus functions.
Dimming without problems
Multi Control Module Push is a totally outstanding and If you choose a 0/1-10Vdc push dimmer and a 0/1-10-Vdc LED control gear or
unique product. MCMP means in this context simpli- electronic ballast they will work together smoothly regardless of the brand.
city, ease of use and thus user satisfaction.
Functions
Controlling with DALI and DMX The Control Module Push regulates common 0-10Vdc or 1-10Vdc dimmable
All dimmable LED control gears for LED and dimmable units such as LED control gears and electronic ballasts. The ability to break the
electronic ballasts with 0-10VDC or 1-10VDC can now phase is there so you can switch on/off the units that are dimmable with 1-
be controlled in a DALI or DMX environment, which 10Vdc.
creates unique opportunities in combination with the The control module is equipped with “regulation of minimum dimming level”
existing products on the market. MCMP currently sup- and “regulation of minimum dimming speed”.
ports DALI and DMX (and later KNX). MCMP regulates
common 0-10Vdc or 1-10Vdc dimmable devices such Push dimming
as eg LED control gears and electronic ballasts. Push dimming has several advantages in terms of quick and easy dimming.
A short press for on/off, a long press for dimming up/down. Push dimming is
With control input for push dimming also convenient for the user who wants to control the light level from several dif-
MCMP is equipped with a control input for push ferent locations in the room - several buttons can control the same dimmer.
dimming where you can connect a momentary push
button control. Large groups
You can easily provide a large group of eg LED control gears controlled by
Box shape 1-10Vdc with quick and easy push dimming, which also can be dimmed from
MCMP is made in box shape and can easily be placed multiple locations, unlike traditional 1-10Vdc dimmers in rotary dimmer execu-
in a junction box behind a push button. tion.

Low standby consumption Low stand-by consumption
The relay is of bistable type, which means that the relay The relay is of bistable type, which means that the relay only draws power when
only draws power when the switch changes position the relay switches position (on/off). This means that it does not develop any heat
(on / off). This means that it doesn’t develop any heat in the relay and the relay keeps its settings even after a power failure.
in the relay function.

With memory function
MCMP retains its position even after a power failure.

Alternative possibilities
MCMP are also able to break the phase to turn off /
on the devices that are dimmable with 1-10Vdc. You
can then choose if the pushbutton for example should
guide 0/1-10Vdc regulation or any other device in the
system you want to control.

Designation MCMP CMP
V-40010DCP
Item number V-40010DCMCMP Controlled by one or more
push buttons
Control inputs Controlled by one or more
push buttons - 0-10V
- DALI - 1-10V with bistable relay for
- DMX512 switching function (Max 10A)
- Max 100mA control signal
Outputs - 0-10V - Adjustable between 0-10
- 1-10V with bistable relay for
Scan for more Scan for more switching function (Max 10A) or 1-10Vdc control
MCMP information CMP information - Max 100mA control signal - Memory Function

Function - Adjustable between 0-10
or 1-10Vdc control

- Memory Function

10 Vadsbo LightTech LED-control Selection

LED control gears and big loads

Sometimes you need to control bigger loads by a single Running multiple LED control gears with the same switch
control than only one LED control gear can handle. Involves connecting the retractive switch to the control input of a LED control
Depending on the type of LED control gear, there are gear and then connecting the control inputs of the LED control gears with stan-
some different ways to solve this dard installation cable. (See figure below.)

Cascading The total power in a single series loop is limited by the maximum power of the-
2 pcs LED control gear LCC9 are serially connected on LED control gear. The total power of a single control is limited by the number of
the secondary side with the load. This enables that the LED control gears that can be connected to a control and the maximum power
total power of LED in a single series loop to be dou- of the LED control gear. For example, if the LED control gear can handle max
bled. For example, if a LED control gear handles max. 30W it is 30W which is the limit of a loop of constant current LED. If you then
9W load (equivalent to for example to 7 pcs of 350mA can connect 20 pieces of LED control gears to a retractive switch, the overall
1.2W LED) two pieces can be serially connected giving power of a control- loop is 20 pcs x 30W giving a total of 600W.
a total power of 18W, equivalent to eg 15 pcs of
350mA 1.2W LED in a loop. The control, whether it is It is still perfectly possible to connect several retractive switches in parallel to
a momentary switch or a 1 -10Vdc control, is con- control the entire group of LED control gears from different places. After the
nected to the Master unit. The Master device is set to installation is completed, the system shall be synchronized the first time.
the constant current the LED lights are rated for and If you do not synchronize, there may be that some devices will shut down while
handles the constant current regulation of the light. others switch on or dim uneven.
The slave unit is set at a constant voltage and helps as
a voltage boost circuit. Synchronization is performed by the following procedure using the
How to set up the LED control gear is shown in the retractive switch.
manual of the product. 1. A long push (now, all LED control gear shall be lit).
2. A brief push (now, all LED control gear shall be off).
Cascading only works in constant current dimming. 3. A long push until all LEDs are in their maximum position (the LED control gear
If the Master PWM regulates the current and you starts from min. position and goes up to max. if you hold the button down).
then connect a slave who is set to constant voltage
out, there would be a conflict between them with an This means that you do not need any special sync cable and regular installation
undesirable result as a consequence. The reason that cable can be used.
you can not cascade connect 12 and 24Vdc constant
voltage is because 12 and 24Vdc is PWM controlled. 1 -10Vdc Control
This means that you do not need any special sync cable Involves connecting a 1-10Vdc control module to the control input of the LED
and regular installation cable can be used. control gear. All LED control gears will then get the same control signal from a
1-10Vdc control(dimmer).
N The total power in a single series loop is limited by the maximum power of the
L LED control gear. The total power of a single control is limited by the number of
LED control gears that can be connected to a control and the maximum power
220-240 VAC of the LED control gear. For example, if the LED control gear can handle max
30W it is 30W which is the limit of a loop of constant current LED.
If you then can connect 20 pieces of LED control gears to a 1-10 Vdc dimmer,
the overall power of a control-loop is 20 pcs x 30W giving a total of 600W.

S LN

Slave

LED DIP
– + – + Switch

S LN Controlling multiple LED control gear with same button
You can not connect multiple 1-10Vdc dimmers to the same control loop.
Master Thus you can not dim light from different points with this solution.

LED DIP 11 Vadsbo LightTech LED-control Selection
– + – +Switch

Cascade connection

EDL-system, Easy DALI LED-control

About the EDL-system The components of the EDL-system

Vadsbo’s EDL system consists of a number of compo- - LCC9 V-36009277D - motionDOT V-40MODOT
nents which - in a simple and user-friendly way - - LCC30 V-36030609 - pushDOT V-40PUDOT
can be used to build a system with the basic lighting - LCC60 V-36060579 - switchDOT V-40SWDOT
control functions of DALI for LED lighting without - LCC60MCM V-36060579MCM - sceneDOT V-40SCDOT
using a PC. - MCMP V-40010DCMCMP - busDOT V-30125DALI
The main components of the system is LED control - CMP V-40010DCP - LD220 V-4022010IB
gear LCC60MCM which drives and dims the most - LD440 V-4044020IB
common LED types on the market and Multi Control
module MCMP which controls and regulates all 0 or
1-10V controlled devices such as eg LED drivers.

LCC60MCM and MCMP can then together with the LCC60MCM (V-36060579MCM)
other control modules in the EDL system be contro- Each output will have its own address in a DALI or DMX system and can be
led by DALI using momentary switches, prespresence controlled individually. Address and group are easily set manually via three knobs
detect­ion devices or by retractive switches that can on the device.
easily be programmed for different scenarios.
LCC60MCM automatically detects if DALI signal or DMX signal is connected and
The simplicity of the EDL-system thus the same knob can be used for both DALI and DMX setting. If the DALI
Simplicity is one of the most important aspects when signal is detected the knobs are used to set the DALI address and group, if DMX
Vadsbo are developing new products. DALI actuators signal is detected the same knobs are used to set the DMX address and group.
tend normally to be set and configured via a computer It goes without saying that the DALI address and group can be set by a computer
interface. This means that you, from the start, don’t if desired.
have control of the address of a specific actuator nor
where it is located. MCMP Multi Control Module Push (V-40010DCMCMP)
MCMP is a box-actuator for DALI / DMX to 0-10 or 1-10V. Setting for 0-10 or
Individually adressable outputs 1-10V can be set directly on the device. You can also set the DALI commands
Vadsbo has provided both LED control gear LCC60MCM via a computer. Address and group is manually set via three knobs.
and MultiControlModule MCMP with manual adjust-
ment of both the address and the group. MCMP automatically detects if DALI signal or DMX signal is connected and thus
The setting is made via 3 pcs of knobs. 1 for the group the same knob can be used for both DALI and DMX setting. If the DALI signal is
(0-15) and 2 pieces for the address (0-63). detected the knobs are used to set the DALI address and group, if DMX signal is
In the same way the control modules are manually set. detected the same knobs are used to set the DMX address and group.
This means that the EDL system can be easily installed It goes without saying that the DALI address and group can be set by a computer
and manually adjusted without having to use a compu- if desired.
ter with advanced software.

This means that EDL is suitable for both the smaller and simpler system and the
bigger advanced system where you want to set and control everything via a
computer.

Individually addressable outputs

Scan to watch
the EDL-film

Precise control
You will also get a precise control directly over where
each address is placed in the facility when you set it
directly on the device and you do not have to identify
this in retrospect. Of course, you can also address and
do the grouping with for example software from a PC.

Projects Project office Tesla Lighting control restau- Lighting control
For detailed information of the EDL installations scan rant da Vinci folder. villa Maxwell folder.
the QR-codes below, visit www.vadsbo.net.
At page 12 you can find information about the
lighting project at the Cruise ship M/S Balmoral.

12 Vadsbo LightTech LED-control Selection

EDL-system components

motionDOT (V-40MODOT) LCC9sc LCC30
motionDOT is an interface between a regular presence V-36009277D V-36030609
sensor or motion detector and DALI bus and can easily see page 4 see page 5
be placed in an wall box.
The time delay is controlled by the motion detector. By
presence lighting is activated to 100% and by absence
lighting is set to a stand-by mode. Standby mode can
be adjusted from fully off to 75% brightness.
MotionDOT can be set to control a group of devices or
all devices on the DALI bus. Setting is done manually
with a knob.

pushDOT (V-42PUDOT)
pushDOT is an interface between a normal retractive
switch and the DALI bus. 4 switches can be connected
and each button get the function to dim up/down, or
on/off. pushDOT can be set to control up to 4 indivi-
dual units, groups or all units on the DALI bus.
Setting is done manually via a knob on the backside.

switchDOT (V-40SWDOT) LCC60
switchDOT enables dimming up and down and provi- V-36060579
des an interface between a standard retractive switch see page 5
and DALI bus and can easily be placed in an appliance
box. For example, a double switch can be connected to
the control module and a button dims up or switches
on while the second button down dims or turns off.
switchDOT can be set to control an individual unit,
group of units or all devices on the DALI bus. Setting is
done manually with a knob.

sceneDOT (V-40SCDOT) LCC60MCM LD220 LD440
sceneDOT enables the function to store and recall up V-36060579MCM V-4022010IB V-4044020IB
to four scenarios (home, away, cleaning, etc.). see page 6 see page 15 see page 15
4 buttons can be connected to the module, one for
each scenario. For achieving optimum results using a MCMP
4-channel low voltage switch is recommended. V-40010DCMCMP
Scenarios are easily stored in each scenario button, by see page 10
holding the button down for about 10 seconds.
sceneDOT can easily be placed in an appliance box.
To memorize eg ”All off” function on key 1 first all
lighting groups are manually switched off with each
unit’s individual control.
When all lights are switched off key 1 is pressed for 10
seconds. Confirmation of stored scenario is displayed
by all lights flashing.
Setting of - if only a specific group or if all devices on
the bus must store scenarios - is done manually with a
knob. You can also set which memory position
(of 16 possible) each button corresponds to.

busDOT (V-30125DALI)
busDOT is a power supply for DALI bus and can deliver
up to 125mA. As an example, a control gear consumes
max 2mA and a control module max 6mA.

motionDOT pushDOT sceneDOT switchDOT busDOT

V-40MODOT V-42PUDOT V-40SCDOT V-40SWDOT V-30125DALI

13 Vadsbo LightTech LED-control Selection

EDL-system installations

Lighting control Cruise ship M/S Balmoral By the system architecture and programming for such projects it is of great
Vadsbos EDL-system is since December 2014 installed importance to control individual addresses in different levels as well as fading in/
on board a restaurant on the Cruise ship M/S Balmoral out and can therefore be performed with PC programming / tools.
belonging to Fred Olsen Cruise Line. The installed EDL-system is dimmer flicker-free 0-100% which the end customer
The project was to update the lighting in the restau- is very satisfied with.
rant “Morning light Pub and Bar”.
The updated lighting is divided in two groups, the The installation was done by Naesco, Miami, Florida - USA December 2014.
restaurant and the bar, as shown below. It consists of The LED lighting was delivered by Lyngsaa AS, Frederikshavn, Denmark.
56 pcs of the LED control gear LCC60MCM and three
pieces of sceneDOT linked to two control panels.

The restaurant

DALI BUS 1 - Addresses 00-51, Group 0

Ceiling lighting 18 pcs LCC60MCM controls 108 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

Decorative lighting 3 pcs LCC60MCM controls 16 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

Wall lighting 2 pcs LCC60MCM controls 5 pcs Lyngsaa LED/rep-kit/3W/250lm/CRI>90

Emergency lighting 3 pcs LCC60MCM controls 10 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

DALI BUS 2 - Addresses 00-49, Group 0

Ceiling lighting 21 pcs LCC60MCM controls 102 pcs LED/PAX400/4,2W/400lm/CRI>90

Decorative lighting 2 pcs LCC60MCM controls 6 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

Wall lighting 2 pcs LCC60MCM controls 5 pcs LED/rep-kit/3W/250lm/CRI>90

Control panel 1

Scene 0 = 100% Scene 1 = 25% Scene 2 = 10% Scene 3 = 5%

The panel is connected to 2 sceneDOT which controls the DALI BUS 1, Group 0.
The fading is set to 6 seconds. The following scenarios are set in the restaurant:

The bar

DALI BUS 2 - Addresses 00-51, Group 1

Ceiling lighting 3 pcs LCC60MCM controls 20 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

Shelf lighting 2 pcs LCC60MCM controls 6 pcs Lyngsaa LED/PAX400/4,2W/400lm/CRI>90

Control panel 2

The panel is connected to 1 sceneDOT which controls the DALI BUS 2, Group 1.
And the fading is set to 6 seconds. The following scenarios are set in the bar:

Scene 0 = 100% Scene 1 = Scene 2 = Scene 3 =
100% ceiling lighting 100% ceiling lighting 100% ceiling lighting
and shelves 50% shelves 50% shelves
50% front bar, ceiling 25% front bar, ceiling 10% front bar, ceiling

14 Vadsbo LightTech LED-control Selection

LED-dimmers

UD100, LD220 and LD440 Adjustable minimum dimming level Download the
Depending on the type of load that is connected to LightKey 2015
Universal push dimmers UD100, LD220 and LD440 the dimmer, the dimmer’s lowest dimming level can Vadsbo tests the
be adjusted to fit the load in question. The dimming most common
Universal LED-dimmers for wallbox installation characteristic is distinguished between different types dimmable 230V
that starts at 1W of loads. This feature is perfect for use when there is LED on the mar-
A common problem - when dimming LED lamps and mixed loads of different lamptypes including dimmable ket together with
CFL lamps - is that conventional dimmers usually halogen and incandescent lights. It is also very handy our dimmers and
require a high minimum load of 50W, 35W or 20W, if the user at some future date decides to switch from and summarizes
while low energy light lamps and LED lamps have a po- incandescent to 230 VAC dimmable LEDs. Then you the results in the
wer range from 1W up to 20W. For dimming of these need only adjust the lowest dimming level to the new annual LightKey!
low energy lamps dimmers that can operate from 1W load, instead of buying a new dimmer.
and up are required. Vadsbo’s series of universal push
dimmers starts already at 1 W for dimming of both Memory function
lowpower lamps as well as electronic transformers, Equipped with memory function that also remains after
dimmable LED-drivers and incandescent lamps. power failure.

Designation UD100 LD220 LD440
V-4010020IB V-4022010IB V-4044020IB
Item number 1-100W 1-200W 1-440W
230 V +/-10% 50 Hz 230 V +/-10% 50 Hz 230 V +/-10% 50 Hz
Power 0,43 A 0,87 A 1,91 A

Voltage 1-100W 1-200W 1-440W
1-100W 1-200W 1-440W
Max current 1-100W 1-200W 1-440W
1-100W 1-200W 1-440W
For dimming of 1-100W 1-200W 1-440W
1-100W 1-200W 1-440W
- Dimmable 230V LED Yes Yes Yes
- Dimmable LED driver for phase control
- Dimmable CFLs Yes Yes Yes
- 230 V halogen lamps
- Electronic transformers Yes Yes Yes
- Incandescent light
Has adjustable minimum dimming level Yes Yes Yes

Memorises the last set brightness, even after Yes Yes Yes
power failure
With motion detection / twilight relay / timer Ø56 H22 mm Ø56 H22 mm Ø56 H22 mm

Is controlled up to 5 reactive toggle switches

With soft start

Dimension

Wider dimming range Wider dimming range, starts alredy at 1 W
Excellent test ratings
Adjustable min. dimming level 0-100% dimming

Highest ratings in tests of 25 leading brands of 230 V LED-lamps.
Average rating 4,7 points out of 5. 15 lamps scoring 5 out of 5.
Different minimum settings possible for LED-lamps and CFL.

15 Vadsbo LightTech LED-control Selection

LED-dimmers - Rotary type

PWM 360A KED10VDA PWM 360A can
be combined with
LED dimmer PWM 360A works with pulse width mo- Rotary type 1-10V Control module Busch Jaeger fronts
dulated current and dims constant voltage diodes from KED10VDA is a 1-10 Vdc control module for contolling
1W to 360W with 12 Vdc and 24 Vdc power supply dimmable electronic ballasts, LED drivers and electronic
from 15 to 360W. transformers with 1-10Vdc input.
The KED10VDA is quiet and operate with high
Dimming LEDs from 1W ... efficiency.
Light-emitting diodes are operating in low power • Max 10A
range from 1W and up. Dimming of light sources with • Rotary type knob
low power, necessitate dimmers that can operate from • Protection against transients, overloads and
as low as 1W. PWM 360A solves dimming problems at
these low loads. overtemperature
• EMC approved
... to 360W • Dimensions 84x84x45 mm
For LED chandeliers or larger LED installations power
requirements are higher. PWM 360A solves dimming LED-dimmer VD200
problems at large loads of up to 360W.
VD200 is a LED dimmer for 230V LED,
... even in combination with Busch Jaeger fronts 230V halogen- and incandescent lamps up to 200W,
PWM 360A can be combined with Busch Jaeger fronts dimmable LED-control gears and electronic
in designs glass, aluminum, gray, anthracite and white. transformers. The minimum output is 1W.

Power supplies for driving e.g. PWM360 LED-dimmer VD600
Power supplies in 12-24 Vdc with power from 15W
to 360W. Also for DIN-rail mounting. VD600 is a versatile LED dimmer suited for
• Dimmable LED 10-300W
• 230V halogen 35-500W
• Incandescent and electronic transformer 35-600W

Power supplies for PWM 360A KED10VDA LED-dimmer VD200 LED dimmer VD600
driving PWM360 V-4036020
1-360W V-40010A20DC V-4020020TRL V-4060020L
Designation Constant voltage diodes
Item number 0,1-10A 1-200W 1-600W
Power 8-24 Vdc
For dimming of (PWM modulated) Electronic ballasts, Incandescent, 230V halo- Incandescent, 230V halo-
Rotation LED drivers and electro- gen, dimmable LED driver gen, dimmable LED driver
Output Yes nic transformers with and GV10 LED light, and GV10 LED light,
White 1-10Vdc input. electronic transformer. electronic transformer.
Dimming function 84x84x45 mm
- ON/OFF Push: 230V, on / off Rotation Rotation
Colour Rotation: 1-10Vdc control
Dimension
Rotation

Yes Push Push

White White White

84x84x45 mm 84x84x45 mm 84x84x45 mm

16 Vadsbo LightTech LED-control Selection

Du0TM driving and dimming 12Vac LED

LD220 ZERO 35 12 VAC LED

100% of dimmable
99% of non-dimmable*

A new concept in dimming of 12VAC LED
The combination of LD220 + ZERO, 0 Watt transfor-
mers - Du0TM generates a unique profile of the phase
angle control of 12 Vac LED lights.
The result is that 100% of 12Vac dimmable LED lights
and 99% of non-dimmable 12Vac LED lights are dim-
med in an excellent manner. Additionally ZERO 35 +
LD220 fits in a wall-box!

The first component of Du0TM - UD100, LD220 and Universal push Universal push Universal push
440, universal low power dimmers dimmer UD100 dimmer LD220 dimmer LD440
Vadsbo´s universal low-power LED- dimmers will excel- V-4010020IB V-4022010IB V-4044020IB
lently dim all types of light sources such as dimmable
CFLs and LEDs from low power up to 440W. 0 WATT transformer ZERO 35
Depending on the power factor of each lamp over V-1503520RZ
20 pcs 9W 230Vac dimmable LED lights can be dim-
med with LD220 for example.

The second component of Du0TM - ZERO, 0 WATTs 0 WATT transformer ZERO 70
electronic transformers V-1507020Z
The 0 WATT transformers ZERO 35 and 70 starts
already at 0W. ZERO 35 is made in box-shape and fits
into a wall box which facilitates the installation work.
A conventional dimmer switch that starts at 20-35W
is unable to deliver enough low RMS voltage for low
power LED lamps with power from 3W and up.
The combination UD100 / LD220 / LD440 which starts
already at 1W and the ZERO transformers, starting at
0W, provide the sufficiently low RMS voltage level.

Dimmable LED lamps typically have a built-in PWM-like
feature that allows them to be dimmed which is not
the case with non-dimmable LED lights.
Du0TM emulates PWM dimming, so even non-dimmable
LED lamps will be dimmed in an excellent manner.

The Du0™-concept

17 Vadsbo LightTech LED-control Selection

Notes

18 Vadsbo LightTech LED-control Selection

Notes

NOTE that this document contains QR codes, to read Technical specifications are subject to change without
these download a QR reader to your smartphone or notice. Data subject to change without notice.
tablet, then scan the QR code. You need access to the All our products have a 2 year guarantee.
internet to access the material. All material is available
at www.vadsbo.net. Editors: Sune Ågren, Johan Sandberg
Layout and original: Teresia Ågren
The content on these pages are subject to copyright
under the Berne Convention. None of the information ©2015 Vadsbo LightTech
material may be reproduced for external use or trans- 2015-05-28
mitted in any form without written permission from
Vadsbo.

19 Vadsbo LightTech LED-control Selection