Wedge Wire Resin Trap Filter For Water Treatment Plant
The general requirement for removing water from the furnace water is to remove the submersible dust, and to ensure that the furnace is free from contaminants. For the purpose of safe operation of the furnace, it is usually used as a chemical treatment method for resin exchange resin loaded in the exchange tower. During operation at the factory, the filter nozzle in the separation tower can easily handle the pressure unevenness or the water supply. The resin is washed away after the formation of the resin, and the effect of low water treatment is reduced, and the water control cycle is shortened. At the same time, the furnace and other equipment for resin and resin inflow have the advantage of creating safe production.
To solve this problem. Normally, the outlet of the separate exchange tower is installed at an angle or through a resin trap to prevent the resin from flowing out. However, the size of the two types of resin catcher is large, the water flow blocking force is large, the installation is inconvenient to fold, and it is difficult to collect the resin.
To this end, we have developed a small volume and large filtering area. A convenient and thorough resin trap filter with low resistance.
-
Follow
-
0
-
Embed
-
Share
-
Upload
