ALCOA FASTENING SYSTEMS - The Lawless Group

Toll-Free: 1-800-462-4983

ALCOA FASTENING SYSTEMS ALCOA FASTENING SYSTEMS

Blind Rivets Blind Rivets
Marson Marson

Open End Q-Lok
For blind fastening where there is Retained mandrel increases
no access to opposite side of shear and tensile strength, use in
work. high vibration applications.

Sizes Materials Sizes Materials
3/16” Steel/steel
3/32” to 1/4” Steel/steel
Aluminum/aluminum ALCOA FASTENING SYSTEMS
Aluminum/steel
Stainless/stainless Blind Rivets
Stainless/steel Marson
Copper/brass
Copper/steel T-Rivets
High clamp up, high shear
ALCOA FASTENING SYSTEMS strength, creates a wide bearing
surface.
Blind Rivets
Marson Sizes Materials
1/4” Aluminum/steel
Closed End
Moisture-resistant due to closed
end, greater shear and tensile
strength.

Sizes Materials ALCOA FASTENING SYSTEMS
1/8”, 1/4”
Aluminum/steel Blind Rivets
Aluminum/aluminum
Stainless/stainless Marson

ALCOA FASTENING SYSTEMS Special Application
Small flange rivet used primarily
Blind Rivets for fastening decorative materials
Marson on boats, automobiles and other
motor vehicles.
Multi-Grip
Extended grip range capacity, Sizes Materials
reduces inventory (fewer sizes 1/8”
required). Stainless/steel
Aluminum/aluminum

Sizes Materials ALCOA FASTENING SYSTEMS
1/8”, 3/16”
Aluminum/steel Blind Rivets
Steel/steel
Marson
ALCOA FASTENING SYSTEMS
Klik-Lock
Blind Rivets Hole-filling fastener with excellent
Marson gap pull-out. Solid circle lock cre-
ates internal lock during installa-
Tri-Bulb tion that virtually eliminates pin
Large footprint on blind side, great push-out.
for soft or brittle materials.
Sizes Materials
3/16”, 1/4”
Steel/steel
Sizes Materials Aluminum/aluminum
Stainless/stainless

5/32”, 3/16” Aluminum/aluminum

1 View & Search Complete Catalog

at LawlessGroup.com

Local: 972-247-8871

ALCOA FASTENING SYSTEMS ALCOA FASTENING SYSTEMS

Blind Rivets Air/Hydraulic Rivet Tool
Marson Marson

Plastic This next-generation, professional-
Secure lock prevents pull-out, fas- series air/hydraulic riveter is
ten plastic to plastic, plastic to designed to be light weight and
metal or plastic to fiberglass. well-balanced. It is engineered to
maximize stroke and pull force with
Sizes Materials a 3-jaw set. For added conve-
nience, you can direct connect or
5mm - 8mm Nylon body, Delrin use the attached swivel. The tool is
500 Mandrel supplied with nosepieces to set riv-
ets in all alloys, and comes com-
ALCOA FASTENING SYSTEMS plete with adjustment service
wrenches, hydraulic fluid, fluid appli-
Cordless Rivet Tool cator, spare jaws, and a removable
Marson swivel air connection line with an air
OFF/ON valve built in. An adjustable vacuum system control allows you
Marson is making installation to control the force of air needed to hold the rivet in place. Or, you may
more efficient with the BT-1 bat- operate with the vacuum system turned off. Recommended air pressure
tery-powered cordless rivet tool. is 70-95 PSI.
It features all the reliability and
performance you would expect Stroke: 3/4"
from Marson, along with supe- Pulling Force: 1,800 lbs.
rior features and specifications: Capacity: 3/32" – 3/16", all alloys
Weight: 2.9 lbs
• Capacity: 3/32" (2.4 mm) - 3/
Mfg Part #
16" (4.8 mm)
MP-3V/39045
• Stroke length: 0.79" (20 mm)
• Traction power: 1,870 lbs. ALCOA FASTENING SYSTEMS

(850 kg) Hand Rivet Tool
Marson
• Weight (with Li-ion battery pack): 4.6 lbs. (2.1 kg)
• Battery pack: 14.4 V / Li-ion / 3.0 A.h The Big Daddy is the most
• Recharge time: approximately 60 minutes versatile and powerful Mar-
• Tool accepted: Ni-cad / Ni-MH / Li-ion son brand hand riveter, tak-
ing the hard work out of
The Marson BT-1 is ideal for applications ranging from construction, fur- setting large diameter blind
niture assembly, lighting fixtures, signs, trailers, and many more. rivets. Its extra-long handles
provide excellent leverage
Mfg Part # and permit working a foot
BT-1 beyond natural reach. Other
features include a patented
ALCOA FASTENING SYSTEMS bearing design, self-adjust-
ing two-piece jaws and single-unit body construction with a steel insert
Hand Rivet Tool toprovide stronger threads for the nosepieces included. In addition, the
Big Daddy features a double-gear reduction system which easily sets
Marson from 1/8" to 1/4" diameter Klik-Fast rivets in all alloys, including 1/4"
Klik-Split® and 3/16" and 1/4" Klik-Lock™* rivets. And a one-piece col-
The HP-2 is the number one let case eliminates the need to adjust the tool when changing rivet
selling hand rivet in the industry. diameters. The Big Daddy model # M39031comes with 5/32", 3/16" and
Know and trusted for durability, 1/4" nosepieces which are stored in the body. Weight: 3.75 lbs.
quality and performance, The
HP-2 is often copied but never Mfg Part #
duplicated. Its square shoulder
fulcrum pin of cold-formed heat- Big Daddy II/39031
treated steel prevents pin rota-
tion that can elongate the ALCOA FASTENING SYSTEMS
engaging holes and cause
premture tool failure in imitation Rivet Nuts
tools. The HP-2 sets-up to3/16'' steel rivets and comes with four Marson
mounted nosepieces (3/32'', 1/8'', 5/32'' and 3/16'') and a service
wrench. MRN Series
Flathead Flange (thick wall) for applications
Mfg Part # that require heavy push-out loads (recommend
spin-pull tool).
HP-2/39000

Sizes Materials

6/32 to 3/8-16 Steel, Aluminum

View & Search Complete Catalog 2
at LawlessGroup.com

Toll-Free: 1-800-462-4983

ALCOA FASTENING SYSTEMS ALCOA FASTENING SYSTEMS

Rivet Nuts Rivet Nuts
Marson
Marson
MPN Series
Poly-Nut Rivet Nut, very small flange, lowest profile MQN Series
for near counter sink applications. Quad-Leg Rivet Nut for light duty thin
or soft/brittle material – will accommo-
Sizes Materials date slightly oversized hole with large
back side footprint.

6/32 to 3/8-16 Steel, Aluminum Sizes Materials

ALCOA FASTENING SYSTEMS 6/32 to 1/4-20 Steel
M4x.07 to M6x1.0
Rivet Nuts
Marson ALCOA FASTENING SYSTEMS

MTS Series Rivet Nuts
Thread-Sert®, small flange, 360 degree swaging
action in the hole and no maximum grip range. Marson

Sizes Materials MXN Series
Large Flange Cross Bulb, large grip range
6/32 to 3/8-16 Steel, Aluminum with pre-bulb and 4 slots, provides large
blindside footprint for greater pull-out
strength in thin sheet metal and plastics.

ALCOA FASTENING SYSTEMS Sizes Materials

Rivet Nuts 1/4-20 to 3/8-16 Steel
Marson 6mm to 10mm

MLR/MSR Series ALCOA FASTENING SYSTEMS
Ribbed Rivet Nut with increased turn-out
resistance versus conventional rivet nut; Rivet Nuts
large and small flange available. Marson

Sizes Materials MET Series
External Thread Stud Rivet Nut allows for
6/32 to 3/8-24 Steel, Aluminum component mounting and mate nut.
M4x.07 to M10x1.5

ALCOA FASTENING SYSTEMS Sizes Materials
Steel
Rivet Nuts 6-32 to 3/8-16
Marson 4mm to 10mm

MLC/MSC Series ALCOA FASTENING SYSTEMS
Ribbed Rivet Nut with closed end for thread
seal; large and small flange available. Rivet Nuts

Sizes Materials Marson

6/32 to 3/8-24 Steel MNN Series
M4x.07 to M10x1.5 Neoprene Insert with pre-molded
brass nut for quick fastening in vibra-
tion and moisture resistant applica-
tions.

ALCOA FASTENING SYSTEMS Sizes Materials

Rivet Nuts 6-32 to 1/2-13 Neoprene
Marson M3-0.5 to M12-1.75

MHN Series
Large Flange Half Hex Rivet Nut for
hex hole to provide exceptional turn-
out resistance.

Sizes Materials

6/32 to 3/8-16 Steel
M4x.07 to M10x1.5

3 View & Search Complete Catalog

at LawlessGroup.com

Local: 972-247-8871

ALCOA FASTENING SYSTEMS ALCOA FASTENING SYSTEMS

Rivet Nut Installation Tool Spin/Pull Rivet-Nut Setting Tool (160-SP)

Marson Marson

Capable of installing all sizes of The new Marson 160-SP Spin/Pull rivet nut
rivet nuts and threaded inserts setting tool is our most powerful air/hydrau-
up to 1/4-20 and 6mm threads in lic rivet nut tool yet. Engage the rivet nut
steel, the next-generation Rivet onto the mandrel, and the 160-SP automati-
Nut Setter features a quick- cally threads the fastener on the tool. Press-
change mandrel and longer han- ing and holding the trigger in position will
dles for improved leverage and set the rivet nut and reverse itself out auto-
an adjustable stroke, positive- matically, all in one operation. This
stop locking feature. Rivet Nut advanced tool features an adjustable stroke
Setter is ergonomically designed, with a forged, heat-treated steel upper knob in the base of the tool to fully adjust
handle, precision die-cast body of high-strength aluminum alloy, pat- stroke length to suit any grip range.
ented fulcrum pin design, and comfortable hand grips. Available in a Included is a swivel air inlet for increased
variety of kit forms. mobility. For added convenience, adjust-
ments and changes are performed outside
Mfg Part # the tool, with no required tear down to
adjust the stroke or change thread sizes.
RN-1/M39300
Mfg Part # Rivet Nut Thread Sizes Weight
ALCOA FASTENING SYSTEMS
39225 6-32 through 1/2-13 6 lbs
Spin/Spin Pneumatic Rivet Nut Tool (SST)
39226 4mm through 12mm 6 lbs
Marson
ALCOA FASTENING SYSTEMS
The versatile, low cost, Spin/Spin pneu-
matic rivet nut production tool now Free-Running Inserts
comes with a quick-change nosepiece Recoil
assembly and standard socket head cap
screw for convenient replacement and Recoil helically wound wire thread inserts can be
change over. For added ease of opera- used to strengthen threads, giving applications a
tion, the Spin/Spin offers a superior ergo- longer life. Each insert sharing the load over the
nomic design, lightweight body, and entire bolt and hole, improving holding or pull out
operates without stroke adjustment. resistance. With a Recoil insert installed, a more
Available models come supplied with two even distribution of load and stress can be
nosepieces and mandrels accommodat- achieved. Recoil inserts are generally made of type
ing installation of rivet nuts ranging in 304(18-8) stainless steel wire rolled into a diamond
size from 4mm and 8-32" to 8mm and 5/ shape cross-section.
16-18".
Recoil inserts can be supplied in other materials
Mfg Part # RPM Standard Optional such as Inconel, Nimonic 90, Nitronic 60, Phosphor Bronze and type
39801 3000 Nosepiece and Nosepiece and 316 Stainless Steel.
39802 1500 Mandrel Sizes Mandrel Sizes
4mm and 8/32 Standard inserts are free-running, but screw-locking inserts are also
39804 400 6mm and 1/4-20 3mm and 6/32 available. Both free-running and screw-locking inserts are available on
plastic strips for automated tooling systems.
8mm and 5/16-18 5mm, 10-24,
10-32, 1/4-28 Benefits:

10mm, 5/16-24, • Lightweight yet robust design gives superior holding power
3/8-16, 3/8-24 • Quick and simple installation process
• Extensive stock of METRIC, BSW, UNC, UNF, BSC, BA, BSP and
ALCOA FASTENING SYSTEMS
NPT inserts
Taps and Gauges
• Large variety of materials and coating options
Recoil • Special lengths and diameter pitch combinations available to order
• A wide range of tooling options available
Optimum results can be achieved
with Recoil taps and gauges to suit Available Materials Available Coatings
hand-tapping through to volume
production requirements. Using the Stainless Steel Silver Plating
“Go – NoGo” gauge, tapped holes Phosphor Bronze Coloured Dye
can be gauged to enable a preci- Inconel X750 (AS7246) Nickel Alloy Dry Film Lubricants
sion fit. Nimonic 90 (HR 503)
Nitronic 60 (UNS S21800) Austenitic
Taps Gauges Anti-galling Alloy

Taper Close and medium tolerance gauges are used
Intermediate to check the pitch diameter of the tapped hole.
Bottoming Gauge handle and all gauge nibs are marked
Pilot Nose with the extreme product limits for particular
Spiral Flute size and class of fit.
Spiral Point

View & Search Complete Catalog 4
at LawlessGroup.com

Toll-Free: 1-800-462-4983

ALCOA FASTENING SYSTEMS ALCOA FASTENING SYSTEMS

Screw-Locking Inserts Tangless® Designs
Recoil Recoil

The Recoil screw-locking insert is Recoil Tangless inserts are designed to offer the
designed to provide a screw-lock- same reliable thread strengthening whilst mini-
ing feature which will retain screws mizing the risk of losing a ‘tang’ associated with
or bolts under the most severe tanged inserts. Generally, wire thread inserts
vibration or varying temperature use a small, piece of material at the bottom of
conditions. The insert locking con- the insert to provide a catching point for the
figuration comprises a series of installation tooling, making installation possible.
uniquely designed locking chords The tang is broken off and removed after instal-
which, upon the engagement of a lation.
screw or bolt, deflect radially to
permit the installation of the bolt. Tangless inserts, however, can be installed with-
Upon bolt entry, these straight seg- out the use of a tang using specialized tooling and an installation notch
ments are flexed outwardly, creat- on the bottom coil of the insert. The absence of a tang eliminates the
ing pressure on the bolt. This risk of the metal tang falling into safety critical applications such as
pressure is applied between the flanks of the bolt thread so that contact engines or electronic equipment.
area is maximized.
Available in free-running, screw-locking and strip-feed varieties.
Locking inserts retain locking torque over numerous assembly cycles.
Refer to relevant specifications for insert life. Each Recoil screw-locking Benefits:
insert type has a specifically designed locking configuration. This
ensures that the insert meets its design specification requirements. • No tangs to break, retrieve or lose – eliminating risk of a lost tang
Therefore the shape, depth, and number of locking chords will inevitably • Significantly decreased installation and inspection time
vary for differing thread types and sizes. • Approved for use on military programs by NASM8846 and NAS1130
• Bi-directional design eliminates insert orientation requirement
NOTE: Recoil locking inserts are supplied coloured in a red surface dye • Quick, non-destructive removal prevents damage to castings
as standard for differentiation from standard inserts.
Available Materials Available Coatings
Both screw-locking and free-running inserts are available on plastic
strips for automated tooling systems. Stainless Steel Silver Plating
Phosphor Bronze Coloured Dye
Benefits: Inconel X750 (AS7246) Nickel Alloy Dry Film Lubricants
Nimonic 90 (HR 503)
• Increased bolt retention in vibrating applications Nitronic 60 (UNS S21800) Austenitic
• Consistent performance against temperature variations Anti-galling Alloy
• Available in Metric, UNC and UNF thread forms. Others on request.

Available Materials Available Coatings ALCOA FASTENING SYSTEMS

Stainless Steel Silver Plating Thread Repair Kits
Phosphor Bronze Coloured Dye Recoil
Inconel X750 (AS7246) Nickel Alloy Dry Film Lubricants
Nimonic 90 (HR 503) Containing everything you need to
Nitronic 60 (UNS S21800) Austenitic complete thread repair projects,
Anti-galling Alloy Recoil’s innovative and cost effective
thread repair kits are utilised world-
ALCOA FASTENING SYSTEMS wide in industrial, automotive & aero-
space maintenance solutions.
Installation Tooling
Recoil currently offer a range of
Recoil different kits:

Alcoa Fastening Systems offers 1 Recoil Pro XL kit is our most
a selection of work arms and
power tooling, including high advanced kit to date, with a com-
efficiency pneumatic and elec- plete rework on the kit box and the
tric installation tools for in-line contents for optimum usability.
production or repetitive mainte-
nance situations. A range of 2 Original Recoil kit provides you
associated tooling is available to
facilitate insert installation, with the basis for the thread repair. Large or unusual size will nor-
including manual installation mally be supplied as a specialist kit.
tooling and manual, spring, and
pneumatic operated tang brea- 3 Recoil workshop kit contains a selection of kits in the most popular
koff tools.
sizes so you always have the kit you need close at hand.
Available Types
Benefits:
Manual hand tool
Prewinder tool with handle • The largest ex stock range available, including METRIC, BSF, BSW,

Electric powered tool UNC, UNF, BSC, BA, BSP and NPT in single or multiple size formats.
Pneumatic powered tool
• Outstanding quality components that won’t let you down.
Tang break tool • Pro XL kits include everything to repair a thread; tools, drill and tap.
• Easy to use, with detailed instructions in a range of languages.
• Practical design - sleek, durable case for easy storage and carriage.

Typical Applications:

• Can be used to repair any damaged thread.
• Widely used in automotive applications across car, motorcycle, and

commercial vehicle repair.

5 View & Search Complete Catalog

at LawlessGroup.com