Equipment Technical Data Sheet

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Densin pump

Equipment Number HPW04-04-0001
Make Densin

Dimension L x B x H 8.5'x4.75’x5.9’

Weight (ton) 2

Power Type Diesel DENSIN PUMP
140
Fuel Tank Capacity Duetz The principle component of high pressure
(L)
water jetting cleaning system is positive displacement
Engine Make high pressure pumps which discharge water into a
common manifold to which flexible hoses or lances
Engine Power (hp) 154 with nozzle or other cleaning accessories are
attached. The pump is powered with diesel engine
Engine oil grade 15W40 and can be mobilized easily.
20
Engine oil capacity 15W40
(L) 25
36250(2500)
Pump Oil Grade 250Hrs/ 6 months

Pump Flow Rate
(lpm)

Pump Pressure
Rating PSI (Bar)

Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Inside Bundle Cleaner
Equipment Number
HPW02-10-0001
Make HPW02-10-0002

Peinamann

Dimension L x B x H 37’x7.21’x 7.75’

Weight (ton) 4.5

Engine Power (hp) 33 INSIDE BUNDLE CLEANER

Power Type Diesel High production rigid lance machine designed
80
Fuel Tank Capacity 15W40 to handle a large quantity of bundles during
(L) 7.5 turnarounds. Cabin stays on top, giving the operator
120 the best view of the tube sheet for maximum speed.
Engine oil grade VG-68 Cleans 5 tubes at the same time with an average
speed of 500 - 750 tubes per hour. Very comfortable
Engine oil capacity for the operator and maximum safety. Very reliable
(L) and powerful machine for all types of heat exchangers

Hydraulic Oil tank
(L)

Hydraulic Oil Grade

Lance Speed (m/sec) 0-1

Pitch Of lance (mm) 22-45
1000
Recommended 180 - 200
water pressure (bar) 22-45
Recommended flow 250Hrs/ 6 months

(l/min)

Pitch Of lance (mm)

Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Scissor Lift

Equipment Number HPW02-11-0001

Make NLB

Dimension L x B x H 36.8'x7.19’x2.3’

Weight (ton) 2.4

Power Type Diesel SCISSOR LIFT
35
Fuel Tank Capacity HATZ Hydraulic rigid lance machine with 5 lances
(L)
built on a double scissor lift platform to reach 6m
Engine Make height. Very strong drive mechanism at the front pulls
lances into the exchanger tubes to avoid bending.
Engine Power (hp) 11 Cleans bundles in place without having to build tall
scaffolds to support the lance guide. Easy to transport
Engine oil grade 15W40 on a trailer, loads itself without crane. Designed to
1.9 clean the most difficult ’in place’ bundles at higher
Engine oil capacity 80 levels. Average cleaning speed: 300-500 tubes per
(L) VG-68 hour
1600
Hydraulic Oil tank 0 - 0.5
(L)

Hydraulic Oil Grade

Bundle Diameter
(mm)

Lance Speed (m/sec)

Number of Lance 5
6000
Max Working Height 250Hrs/ 6 months
(mm)

Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Bobcat With Peinamann
Equipment Number attachment
HPW02-12-0001
Make HPW02-12-0002

Bobcat

Dimension L x B x H 13.77’x4.65’x7.8’

Weight (ton) 2.8

Power Type Diesel BOBCAT WITH PEINEMANN ATTACHMENT
Fuel Tank Capacity 53
Kubota
(L) 26
Engine Make

Engine Power (hp)

Engine oil grade 15w40 Bobcat excavator equipped with high
5.4
Engine oil capacity 18.2 pressure water jetting attachment for outside bundle
(L) VG-68 cleaning purpose. Used for cleaning Shells and
bundles.
Hydraulic Oil tank
(L)

Hydraulic Oil Grade

Blade Height (mm) 378

No. of Nozzle 5
250Hrs/ 6 months
Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Bundle Puller 45T

Equipment Number BUN01-03-0001

Make Peinamann

Dimension L x B x H 29.52'X8'x8.6'

Weight (ton) 8.9

Engine Power (hp) 33

Power Type Diesel BUNDLE PULLER – 45 TON
100
Fuel Tank Capacity 15W40 The Aerial bundle extractor is a self-contained
(L) 7.5
250 unit, which is easily lifted in position by a crane. The
Engine oil grade VG-68 machine has its own air cooled diesel engine, which
190 drives the hydraulic system and is operated via
Engine oil capacity 2000 remote control.
(L) 45000
8000
Hydraulic Oil tank
(L) 9000

Hydraulic Oil Grade 45000
2450
Standard hydraulic 250Hrs/ 6 months
pressure (bar)
Max Bundle
Diameter (mm)

Max Bundle Weight
(kg)

Max. bundle length
for extractor without

extensions (mm)
Max. bundle length
for extractor with

front extension
(mm)

Max force applied
with the winch (kg’s)

Width of lifting
frame in operational

position (mm)
Preventive

Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Bundle Puller 60 T

Equipment Number BUN01-04-0001

Make Peinamann
29.52'x7.9'x7.8'
Dimension with 11.5
main frame L x B x H

Weight (ton)

Engine Power (hp) 33

Power Type Diesel BUNDLE PULLER – 60 TON
75
Fuel Tank Capacity 15W40 The Aerial bundle extractor is a self-contained
(L) 7.5
215 unit, which is easily lifted in position by a crane. The
Engine oil grade VG-68 machine has its own air cooled diesel engine, which
190 drives the hydraulic system and is operated via
Engine oil capacity 2000 remote control.
(L) 60000
8000
Hydraulic Oil tank
(L) 9000

Hydraulic Oil Grade 60000
2425
Standard hydraulic 250Hrs/ 6 months
pressure (bar)
Max Bundle
Diameter (mm)

Max Bundle Weight
(kg’s)

Max. bundle length
for extractor without

extensions (mm)
Max. bundle length
for extractor with

front extension
(mm)

Max force applied
with the winch (kg’s)

Width of lifting
frame in operational

position (mm)
Preventive

Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA .

Equipment Name Pigging Machine
Equipment Number Double Pumper unit

CDT02-01-0001

Dimension L x B x H 40’x 8.5’ x 15’

Weight (ton) 22

Power Type Diesel
Volvo Penta
Engine Make, Both 343
(RH + LH)

Engine Power (Kw)

Engine Speed (rpm) 1800 PIGGING MACHINE
2000 DOUBLE PUMPER UNIT
Fuel Tank Capacity RH-30 L/h , LH-30 L/h
(L) Pigging is a process in which highly viscous

Fuel Consumption fluids are conveyed out of pipelines. The pig is a
cleaning device that is pumped through the pipeline
Pump Make Waterous under pressure. Thus, contamination is conveyed out
of pipeline.
Pump Capacity 2000 gpm at 150 psig

Pump Pressure (bar) 40
35
Engine Oil Capacity 30
(L) 250 Hrs/6 month

Trans. Oil Capacity
(L)

Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pigging Machine PIGGING MACHINE
Single Pumper unit SINGLE PUMPER UNIT
Equipment Number CDT01-01-0003
20’x 8.5’ x 8’ Pigging is a process in which highly viscous
Dimension L x B x H 13
Diesel fluids are conveyed out of pipelines. The pig is a
Weight (ton) Volvo Penta cleaning device that is pumped through the pipeline
394 under pressure. Thus, contamination is conveyed out
Power Type 1800 of pipeline.
Engine Make, Both 780
30 L/h
(RH + LH) Waterous
Engine Power (Kw) 1250 gpm at 150 psig
40
Engine Speed (rpm) 35
Fuel Tank Capacity 15
250 Hrs/6 month
(L)
Fuel Consumption

Pump Make

Pump Capacity

Pump Pressure (bar)
Engine Oil Capacity

(L)
Trans. Oil Capacity

(L)
Preventive
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pigging Machine
Equipment Number Single Pumper unit

CDT02-01-0002

Dimension L x B x H 40’x 8.5’x 8’

Weight (ton) 24

Power Type Diesel PIGGING MACHINE
Volvo Penta DOUBLE PUMPER UNIT
Engine Make, Both 394
(RH + LH) Pigging is a process in which highly viscous

Engine Power (Kw) fluids are conveyed out of pipelines. The pig is a
cleaning device that is pumped through the pipeline
Engine Speed (rpm) 1800 under pressure. Thus, contamination is conveyed out
1400 of pipeline.
Fuel Tank Capacity RH-30 L/h , LH-30 L/h
(L)

Fuel Consumption

Pump Make Waterous

Pump Capacity 2000 gpm at 150 psig

Pump Pressure (bar) 40
Engine Oil Capacity
35
(L)
PLC, Chart recorder,
Attachment Flow & Pressure
transmitter
Preventive 250 Hrs/6 month
Maintenance

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pneumatic Torqueing
Equipment Number Pump

Make and Model HYT02-02-
0001/0002/0003

Hydratight/Powapak

Overall Height (mm) 466

Diameter (mm) Ø375.5

Air Motor (kW) 3.0

Hydraulic pump 690
outlet (bar)
5 bar @ 1,700 lpm
Pneumatic Source
Input Requirements 10

Maximum Oil PNUEMATIC TORQUEING PUMP
Reservoir Capacity 7

(L) 37 kg (without oil) 44 kg Torqueing pump is a high pressure air powered
(with oil)
Oil Reservoir hydraulic torque wrench pump, designed specifically for
Minimum Fill 6000 bolting applications.
Capacity (L)
82 – 86
Complete Pump
System Weight

Hand Held Control
Pendant Length
(mm)

Noise Level (dB)

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pneumatic Torqueing
Equipment Number Pump

HYT02-02-0004

Make and Model Hytorc/RSST 20

Dimension L x B x H 370 x 240 x 413
(mm) 55

Weight (kg’s)

Flow 1st stage 640
(cu.In.) 55-60
11.6
Flow 2nd stage
(cu.In.)

Flow/lb. Weight

Port 4 PNEUMATIC TORQUEING PUMP
Inter Cooled
Cooling 10,000 Torqueing pump is a high pressure air powered
5
Max pressure (psi) yes hydraulic torque wrench pump, designed specifically for
bolting applications.
Min air pressure
(Bar)

Remote

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Electrical Torqueing
Equipment Number Pump

Make and Model HYT02-01-
0022/0023/0024/0025/
0026/0027

Tristar/HPL 101

Dimension L x B x H 720x250x530
(mm) 38
230V 50Hz
Weight without oil
(kg’s)

Main Voltage

Power Rating (hp) 1.1

Solenoid voltage 230 ELECTRICAL TORQUEING PUMP
(VAC) 7.20
1.10 Torqueing pump is a high pressure air powered
Main Consumption
(A) hydraulic torque wrench pump, designed specifically for
bolting applications.
Motor Capacity (kW)

Nominal Pressure 10-700
(Bar) 70

Flow 1st stage (Bar)

Flow 2nd stage (Bar) 700

Tank Volume (L) 6

Usable Volume (L) 3

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pneumatic Torqueing
Equipment Number Pump

HYT02-02-0005

Make and Model Powertorc/TPP-10TW-3

Dimension L x B x H 320x410x500
(mm) 40

Weight (kg’s)

Flow 1st stage 7 LPM @ 50Bar

Flow 2nd stage 1.6 LPM @ 200Bar

Flow 3nd stage 0.9 LPM @ 700Bar PNEUMATIC TORQUEING PUMP

Power Rating (kW) 1.1 Torqueing pump is a high pressure air powered

Max Pressure (Bar) 700 hydraulic torque wrench pump, designed specifically for
bolting applications.

Tank Capacity (L) 10

Noise Level (dB) 80

Air Flow Rate (cfm) 70

Remote Yes

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Electrical Tensioning
Equipment Number Pump

Make and Model Powermaster/PM-EH-
1500
Weight without oil 38
(kg’s)
450x450x525
Dimension L x B x H
(mm) 230V 50Hz single-phase

Main Voltage

Hydraulic flow 1st 3 ELECTRICAL TENSIONING PUMP
stage (L/min) 0.7
1500 Tensioning pump with Electric motor and gear pump
Hydraulic flow 2nd 5
stage (L/min) are designed to provide optimal service with bolt tensioner
or hydraulic tools single-acting. Equipped with remote
Speed (rpm) control for control and release of pressure.

Cable Length (mtr)

Max Pressure 1st 2,145
stage (Bar) 21,450
5
Max pressure 2nd 80
stage (Bar)

Tank Volume (L)

Sound Level (dB)

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pneumatic Tensioning
Pump
Equipment Number CRAI-BT-02-
01/02/03/04
Make and Model Powermaster/PU-AH-
1500
Dimension L x B x H 450 x 340 x 480
(mm)
20
Weight (kg’s)
Max. Pressure (Bar) 1500

Reservoir Capacity 5
(L) 1:350

Pressure Ratio

System Operating Air 5.1
Pressure, Max. (bar)

Safety Valve Set 5.5
Pressure (bar)

Weight (kg’s) 18

Noise Level (dB) 80

Displacement 1,3
Volume (cm3)

PNEUMATIC TENSIONING PUMP

Tensioning pump with Pneumatic driven is designed

to provide optimal service with bolt tensioner or hydraulic
tools single-acting. Equipped with valve for the control and
release of pressure.

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Pneumatic Tensioning
Equipment Number Pump

CRAI-BT-02-05

Make and Model Powermaster

Weight without oil 35
(kg’s) 320x500x580
1:265
Dimension L x B x H
(mm)

Pressure ratio

Max oil Pressure 26500 PNEUMATIC TENSIONING PUMP
(Bar) 80

Noise Level (dB)

Air filter (scfm) 50 Tensioning pump with Pneumatic driven is designed

Air consumption 750 to provide optimal service with bolt tensioner or hydraulic
(l/min) 10 tools single-acting. Equipped with valve for the control and
release of pressure.
Tank Volume (L)

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name RSL 30 TORQUING
Equipment Number TOOL

CRAI-BT-03-30

Make and Model HYDRATIGHT

Wrench Head Sq. Drive/Hexagonal

Max. Torque Output 37963
(Nm) 2 1/2”

Square Drive Size

Dimension L x B x H 459 x 166 x 263
(mm) 64

Radius (mm)

Weight (kg’s) 47 RSL 30 TORQUING TOOL

Hydraulic torque wrenches (formerly known as Hydratight's

RSL Series) have been used to tighten and loosen nuts and bolts for
professional applications in industries.

RSL 02/04/06/14/20

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name PSD Torqueing pump

Make and Model POWERMASTER/ PSD-
Wrench Head 11

Sq. Drive

Max. Torque Output 11659
(ft/lbs) 1 1/2”

Sq Drive Size

Dimension L x B x H 313 x 225 x 198
(mm) 50

Radius (mm)

Weight (kg’s) 13.6

PSD-11 TORQUING TOOL

Hydraulic torque wrenches, POWERMAASTER's PSD Series

have been used to tighten and loosen nuts and bolts for professional
applications in industries.

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name LOAD CELL PST 10/ PULLER 3
3/4“/ BRIDGE 4”/ Threaded
Equipment Number Puller NRS 4"

Make and Model CRAI-BT-04-10-01/ CRAI-BT-
05-12-01/ CRAI-BT-06-18-04
Max Load (kN)
Hyd Area (in2) POWERMASTER

Outer diameter 3047 TENSIONNG LOAD CELL + BRIDGE + NUT DRIVER +
(mm) 31.48 THREADED PULLER
244
Max Bolt Size Bolt tensioners are devices designed to apply a
Min Pitch between 4”
bolt centers (mm) 197 specific tension to a bolt. The device may be either
removed once the actual nut is threaded into place, or
Height (mm) left in place, in the case of a hydraulic nut.
Clearance (mm)
177
Weight (kg’s)
304

22.1

Load Cell PST-9/ 8/ 7/ 5/ 3
Bridge 11/4/ 13/8/ 15/8/ 17/8/ 2/ 21/4/ 21/2/ 23/4/ 3/ 31/4/ 31/2/ 4”
Puller 11/4/ 13/8/ 15/8/ 17/8/ 2/ 21/4/ 21/2/ 23/4/ 3/ 31/4/ 31/2’’/ M80x3/ M90x3/ M90x4/ M68x3/ M100/3/ M56x3/ M72x3

LOAD PULLER MAX HYD AREA OD (mm) MIN PITCH HEIGHT CLEARANCE WEIGHT
CELL SIZE (in) LOAD (In 2)
(kN) (mm) (mm) (mm) (kg’s)

PST-03 11/4 70 99 174 2.4
639 6.60 115
PST-05 13/8 178 2.9
PST-07 75 101
PST-08 15/8 200 5.2
PST-09 87 113
17/8 942 9.73 145 121 5.6
2 217 5.9
98 120 229 9.4
21/4 238 10.0
21/2 105 120 249 12.3
21/2 256 12.5
23/4 1651 17.06 180 117 132 263 17.2
23/4 264 17.2
129 140
3
1978 20.44 198 132 143

141 146

2257 23.30 215 150 150

150 151

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Hand Torque Wrench

Make and Model Power master PITW-340
Drive 1/2'' Sq. Drive
60-340
Range (Nm)

Head Size (mm) 14 x 18

Overall Length (mm) 572 MECHANICAL TORQUE WRENCH
Weight (Kg’s) 1.7

Model Range Head Size OAL Weight Torque wrench is used where the tightness
(kg’s)
of screws and bolts is crucial. It allows the operator to
set the torque applied to the fastener so it can be
matched to the specifications for a particular
application

(Nm) (mm) (mm)

PITW-50 10-50 9 x 12 356 0.9
356 0.9
PITW-100 20-100 9 x 12 472 1.2

PITW-200 40-200 14 x 18

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name Hydro-test Pump

Equipment Number CRAI-HT-01-01 to 03

Make And Model HYDRATRON-Maximator
(M189LV)
Dimension L x B x H 390x450x385
(mm)
15
Weight (kg’s)

Material Stainless Steel HYDROTEST PUMP

Parts Air filter, lubricator, pressure Hydraulic Test Pump is done to check the
regulator, pressure gauge &
Inlet Fluid Strainer speed control valve component to be tested is being filled up with an
yes incompressible liquid, usually water or oil. With the
Max Rated Output help of a positive displacement reciprocating plunger
Pressure (psi) 9,700 pump incorporating appropriate safety relief and
controls, the pressure of the test component is slowly
Max Flow (L/min) 3.90 increased to a predetermined set point and held for a
predetermined time.
Output Per Cycle 0.928
(In3)
56
Air Consumption
(Scfm) 1.65

Tank Capacity
(Gallons)

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name High pressure Washer

Equipment Number HPW04-01-0001

Make and Model Karcher/ HDS 12/18

Dimension L x B x H 1330 x 750 x 1060
(mm) 175

Weight (Kg’s)

Current type 3 / 400 / 50 HIGH PRESSURE WASHER
(Ph/V/Hz) 600 - 1200
High pressure washers are used for passivation
Flow rate (l/h)
inside the reactor and for all the reactor parts which
Working pressure 30 - 180 / 3 - 18 are dismantled after the unloading of the catalyst.
(bar/MPa) 80 - 155 Passivation helps in removing the free iron from the
8,4 surface of the metal using an acid solution to prevent
Temperature (supply 5 rust.
12°C) (°C)

Connection load
(kW)

Power cable (m)

SERVICE CONTACT DETAILS

Email [email protected]
Contact Number 1800 1234 180

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name High pressure Washer

Equipment Number HPW04-01-0002/0003

Make and Model Karcher / HD 10/25

Dimension L x B x H 560 x 500 x 1090
(mm) 75.7

Weight (Kg’s)

Input Power(Hz) 220V 50

Connection Load 8.8 HIGH PRESSURE WASHER
(kW) 20
30-230 High pressure washers are used for passivation
Min. feed volume 60°C
(l/min) 500 to 1000 inside the reactor and for all the reactor parts which
are dismantled after the unloading of the catalyst.
Working Pressure Passivation helps in removing the free iron from the
(bar) surface of the metal using an acid solution to prevent
rust.
Max feed
temperature

Flow rate ( l/h)

Max. operating over- 275
pressure (bar) 8

Hose length (m)

SERVICE CONTACT DETAILS

Email [email protected]
Contact Number 1800 1234 180

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

EQUIPMENT TECHNICAL DATA SHEET

GENERAL DATA

Equipment Name High pressure Washer

Equipment Number HPW04-01-0004/0005

Make and Model Bosch/ Aquatak 160

Dimension L x B x H 370x370x1000
(mm) 30

Weight (Kg’s)

Input Power 220V 50Hz

Motor power (W) 2.600

Max. pressure (bar) 160

Max. flow rate 570 l/h

Max. flow 40 °C HIGH PRESSURE WASHER
temperature
Self-priming 0.5 High pressure washers are used for passivation
capability (m)
Motor type Induction inside the reactor and for all the reactor parts which
4 cylinder are dismantled after the unloading of the catalyst.
Pump type 5 Passivation helps in removing the free iron from the
8 (Steel Armed) surface of the metal using an acid solution to prevent
Cable length (m) rust.

Hose length (m)

SERVICE CONTACT DETAILS

Email [email protected]
Contact Number 1800 1234 180

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020

GENERAL DATA EQUIPMENT TECHNICAL DATA SHEET

Equipment Name Portable abrasive blasting machine ABRASIVE SHOT BLASTER
WOR05-01-0001 to 0013 Abrasive shot blaster can be used on
Equipment ceramics, metal, glass, plastic and stone. It easily
Number P7:501RE feeds the system of abrasive propelling and it
offers higher production rates.
Model

Dimension Height 1750 mm
Ø 620 mm

Weight 190 Kg

Capacity 5 CFT

Working Pressure 6 Bar

Max allow Pressure 7 Bar
17 bar
Hydraulic testing 16-80 mm
Pressure

Abrasive Size

Metallic Grit 500 Kg

Grit Size 16-80 mm
11-15 (m2/hr)
Approx. Cleaning Metallic - 500kg.
Rate

Abrasive Capacity Sand - 230 kg.

Volume - 142 L.

CRAI-F-EM-04 Rev. 00 Issue date June 27, 2020